summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG12
-rw-r--r--README48
-rw-r--r--board/trab/flash.c10
-rw-r--r--common/main.c17
-rw-r--r--cpu/arm920t/start.S6
-rw-r--r--drivers/pci.c212
6 files changed, 178 insertions, 127 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 10ae064218..f28631a687 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,18 @@
Changes since U-Boot 0.3.1:
======================================================================
+* Fix data abort exception handling for arm920t CPU
+
+* Fix alignment problems with flash driver for TRAB board
+
+* Patch by Donald White, 21 May 2003:
+ fix calculation of base address in pci_hose_config_device()
+
+* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
+ execute "cmd2", even if "cmd1" fails. Note that this is different
+ to "run var1 var2" where the contents of "var2" will NOT be
+ executed when a command in "var1" fails.
+
* Add zero-copy ramdisk support (requires corresponding kernel support!)
* Patch by Kyle Harris, 20 May 2003:
diff --git a/README b/README
index ecc087ad91..e9b714567f 100644
--- a/README
+++ b/README
@@ -2048,6 +2048,48 @@ Please note that changes to some configuration parameters may take
only effect after the next boot (yes, that's just like Windoze :-).
+Command Line Parsing:
+=====================
+
+There are two different command line parsers available with U-Boot:
+the old "simple" one, and the much more pwerful "hush" shell:
+
+Old, simple command line parser:
+--------------------------------
+
+- supports environment variables (through setenv / saveenv commands)
+- several commands on one line, separated by ';'
+- variable substitution using "... $(name) ..." syntax
+- special characters ('$', ';') can be escaped by prefixing with '\',
+ for example:
+ setenv bootcmd bootm \$(address)
+- You can also escape text by enclosing in single apostrophes, for example:
+ setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off'
+
+Hush shell:
+-----------
+
+- similar to Bourne shell, with control structures like
+ if...then...else...fi, for...do...done; while...do...done,
+ until...do...done, ...
+- supports environment ("global") variables (through setenv / saveenv
+ commands) and local shell variables (through standard shell syntax
+ "name=value"); only environment variables can be used with "run"
+ command
+
+General rules:
+--------------
+
+(1) If a command line (or an environment variable executed by a "run"
+ command) contains several commands separated by semicolon, and
+ one of these commands fails, then the remaining commands will be
+ executed anyway.
+
+(2) If you execute several variables with one call to run (i. e.
+ calling run with a list af variables as arguments), any failing
+ command will cause "run" to terminate, i. e. the remaining
+ variables are not executed.
+
Note for Redundant Ethernet Interfaces:
=======================================
@@ -2563,9 +2605,9 @@ Minicom warning:
================
Over time, many people have reported problems when trying to used the
-"minicom" terminal emulation program for serial download. I (wd)
-consider minicom to be broken, and recommend not to use it. Under
-Unix, I recommend to use CKermit for general purpose use (and
+"minicom" terminal emulation program for serial download. I (wd)
+consider minicom to be broken, and recommend not to use it. Under
+Unix, I recommend to use C-Kermit for general purpose use (and
especially for kermit binary protocol download ("loadb" command), and
use "cu" for S-Record download ("loads" command).
diff --git a/board/trab/flash.c b/board/trab/flash.c
index 27c2a5b490..1550e175a4 100644
--- a/board/trab/flash.c
+++ b/board/trab/flash.c
@@ -431,7 +431,15 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
* handle word aligned part
*/
while (cnt >= 4) {
- data = *((vu_long *) src);
+ if (((ulong)src) & 0x3) {
+ for (i = 0; i < 4; i++) {
+ ((char *)&data)[i] = ((vu_char *)src)[i];
+ }
+ }
+ else {
+ data = *((vu_long *) src);
+ }
+
if ((rc = write_word (info, wp, data)) != 0) {
return (rc);
}
diff --git a/common/main.c b/common/main.c
index fe4ebb4f66..6192dff365 100644
--- a/common/main.c
+++ b/common/main.c
@@ -746,9 +746,9 @@ int run_command (const char *cmd, int flag)
char finaltoken[CFG_CBSIZE];
char *str = cmdbuf;
char *argv[CFG_MAXARGS + 1]; /* NULL terminated */
- int argc;
+ int argc, inquotes;
int repeatable = 1;
- int inquotes;
+ int rc = 0;
#ifdef DEBUG_PARSER
printf ("[RUN_COMMAND] cmd[%p]=\"", cmd);
@@ -817,13 +817,15 @@ int run_command (const char *cmd, int flag)
/* Look up command in command table */
if ((cmdtp = find_cmd(argv[0])) == NULL) {
printf ("Unknown command '%s' - try 'help'\n", argv[0]);
- return -1; /* give up after bad command */
+ rc = -1; /* give up after bad command */
+ continue;
}
/* found - check max args */
if (argc > cmdtp->maxargs) {
printf ("Usage:\n%s\n", cmdtp->usage);
- return -1;
+ rc = -1;
+ continue;
}
#if (CONFIG_COMMANDS & CFG_CMD_BOOTD)
@@ -834,7 +836,8 @@ int run_command (const char *cmd, int flag)
#endif
if (flag & CMD_FLAG_BOOTD) {
printf ("'bootd' recursion detected\n");
- return -1;
+ rc = -1;
+ continue;
}
else
flag |= CMD_FLAG_BOOTD;
@@ -843,7 +846,7 @@ int run_command (const char *cmd, int flag)
/* OK - call function to do the command */
if ((cmdtp->cmd) (cmdtp, flag, argc, argv) != 0) {
- return (-1);
+ rc = -1;
}
repeatable &= cmdtp->repeatable;
@@ -853,7 +856,7 @@ int run_command (const char *cmd, int flag)
return 0; /* if stopped then not repeatable */
}
- return repeatable;
+ return rc ? rc : repeatable;
}
/****************************************************************************/
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 4a4825ab36..ed16176a41 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -317,17 +317,15 @@ cpu_init_crit:
.macro bad_save_user_regs
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
-
ldr r2, _armboot_end
add r2, r2, #CONFIG_STACKSIZE
sub r2, r2, #8
- ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0
+ ldmia r2, {r2 - r3} @ get pc, cpsr
add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
add r5, sp, #S_SP
mov r1, lr
- stmia r5, {r0 - r4} @ save sp_SVC, lr_SVC, pc, cpsr, old_r
+ stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
mov r0, sp
.endm
diff --git a/drivers/pci.c b/drivers/pci.c
index 9eaaa15abd..289db8fcfb 100644
--- a/drivers/pci.c
+++ b/drivers/pci.c
@@ -2,7 +2,7 @@
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Andreas Heppel <aheppel@sysgo.de>
*
- * (C) Copyright 2002
+ * (C) Copyright 2002, 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -48,12 +48,12 @@
*
*/
-#define PCI_HOSE_OP(rw, size, type) \
-int pci_hose_##rw##_config_##size(struct pci_controller *hose, \
- pci_dev_t dev, \
- int offset, type value) \
-{ \
- return hose->rw##_##size(hose, dev, offset, value); \
+#define PCI_HOSE_OP(rw, size, type) \
+int pci_hose_##rw##_config_##size(struct pci_controller *hose, \
+ pci_dev_t dev, \
+ int offset, type value) \
+{ \
+ return hose->rw##_##size(hose, dev, offset, value); \
}
PCI_HOSE_OP(read, byte, u8 *)
@@ -63,18 +63,18 @@ PCI_HOSE_OP(write, byte, u8)
PCI_HOSE_OP(write, word, u16)
PCI_HOSE_OP(write, dword, u32)
-#define PCI_OP(rw, size, type, error_code) \
-int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value) \
-{ \
- struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev)); \
- \
- if (!hose) \
- { \
- error_code; \
- return -1; \
- } \
- \
- return pci_hose_##rw##_config_##size(hose, dev, offset, value); \
+#define PCI_OP(rw, size, type, error_code) \
+int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value) \
+{ \
+ struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev)); \
+ \
+ if (!hose) \
+ { \
+ error_code; \
+ return -1; \
+ } \
+ \
+ return pci_hose_##rw##_config_##size(hose, dev, offset, value); \
}
PCI_OP(read, byte, u8 *, *value = 0xff)
@@ -84,40 +84,40 @@ PCI_OP(write, byte, u8, )
PCI_OP(write, word, u16, )
PCI_OP(write, dword, u32, )
-#define PCI_READ_VIA_DWORD_OP(size, type, off_mask) \
-int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose, \
- pci_dev_t dev, \
- int offset, type val) \
-{ \
- u32 val32; \
- \
- if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) \
- return -1; \
- \
- *val = (val32 >> ((offset & (int)off_mask) * 8)); \
- \
- return 0; \
+#define PCI_READ_VIA_DWORD_OP(size, type, off_mask) \
+int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\
+ pci_dev_t dev, \
+ int offset, type val) \
+{ \
+ u32 val32; \
+ \
+ if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\
+ return -1; \
+ \
+ *val = (val32 >> ((offset & (int)off_mask) * 8)); \
+ \
+ return 0; \
}
-#define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask) \
-int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose, \
- pci_dev_t dev, \
- int offset, type val) \
-{ \
- u32 val32, mask, ldata; \
- \
- if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) \
- return -1; \
- \
- mask = val_mask; \
+#define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask) \
+int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\
+ pci_dev_t dev, \
+ int offset, type val) \
+{ \
+ u32 val32, mask, ldata; \
+ \
+ if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\
+ return -1; \
+ \
+ mask = val_mask; \
ldata = (((unsigned long)val) & mask) << ((offset & (int)off_mask) * 8);\
- mask <<= ((mask & (int)off_mask) * 8); \
- val32 = (val32 & ~mask) | ldata; \
- \
- if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0) \
- return -1; \
- \
- return 0; \
+ mask <<= ((mask & (int)off_mask) * 8); \
+ val32 = (val32 & ~mask) | ldata; \
+ \
+ if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\
+ return -1; \
+ \
+ return 0; \
}
PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03)
@@ -143,13 +143,12 @@ void pci_register_hose(struct pci_controller* hose)
*phose = hose;
}
-struct pci_controller* pci_bus_to_hose(int bus)
+struct pci_controller *pci_bus_to_hose (int bus)
{
struct pci_controller *hose;
for (hose = hose_head; hose; hose = hose->next)
- if (bus >= hose->first_busno &&
- bus <= hose->last_busno)
+ if (bus >= hose->first_busno && bus <= hose->last_busno)
return hose;
return NULL;
@@ -178,16 +177,13 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
#endif
bdf += PCI_BDF(0,0,1))
{
- if (!PCI_FUNC(bdf))
- {
+ if (!PCI_FUNC(bdf)) {
pci_read_config_byte(bdf,
PCI_HEADER_TYPE,
&header_type);
found_multi = header_type & 0x80;
- }
- else
- {
+ } else {
if (!found_multi)
continue;
}
@@ -228,22 +224,20 @@ pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index)
*
*/
-unsigned long pci_hose_phys_to_bus(struct pci_controller* hose,
- unsigned long phys_addr,
- unsigned long flags)
+unsigned long pci_hose_phys_to_bus (struct pci_controller *hose,
+ unsigned long phys_addr,
+ unsigned long flags)
{
struct pci_region *res;
unsigned long bus_addr;
int i;
- if (!hose)
- {
- printf("pci_hose_phys_to_bus: %s\n", "invalid hose");
+ if (!hose) {
+ printf ("pci_hose_phys_to_bus: %s\n", "invalid hose");
goto Done;
}
- for (i=0; i<hose->region_count; i++)
- {
+ for (i = 0; i < hose->region_count; i++) {
res = &hose->regions[i];
if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0)
@@ -252,15 +246,14 @@ unsigned long pci_hose_phys_to_bus(struct pci_controller* hose,
bus_addr = phys_addr - res->phys_start + res->bus_start;
if (bus_addr >= res->bus_start &&
- bus_addr < res->bus_start + res->size)
- {
+ bus_addr < res->bus_start + res->size) {
return bus_addr;
}
}
- printf("pci_hose_phys_to_bus: %s\n", "invalid physical address");
+ printf ("pci_hose_phys_to_bus: %s\n", "invalid physical address");
- Done:
+Done:
return 0;
}
@@ -271,29 +264,26 @@ unsigned long pci_hose_bus_to_phys(struct pci_controller* hose,
struct pci_region *res;
int i;
- if (!hose)
- {
- printf("pci_hose_bus_to_phys: %s\n", "invalid hose");
+ if (!hose) {
+ printf ("pci_hose_bus_to_phys: %s\n", "invalid hose");
goto Done;
}
- for (i=0; i<hose->region_count; i++)
- {
+ for (i = 0; i < hose->region_count; i++) {
res = &hose->regions[i];
if (((res->flags ^ flags) & PCI_REGION_TYPE) != 0)
continue;
if (bus_addr >= res->bus_start &&
- bus_addr < res->bus_start + res->size)
- {
+ bus_addr < res->bus_start + res->size) {
return bus_addr - res->bus_start + res->phys_start;
}
}
- printf("pci_hose_bus_to_phys: %s\n", "invalid physical address");
+ printf ("pci_hose_bus_to_phys: %s\n", "invalid physical address");
- Done:
+Done:
return 0;
}
@@ -311,14 +301,14 @@ int pci_hose_config_device(struct pci_controller *hose,
unsigned char pin;
int bar, found_mem64;
- DEBUGF("PCI Config: I/O=0x%lx, Memory=0x%lx, Command=0x%lx\n", io, mem, command);
+ DEBUGF ("PCI Config: I/O=0x%lx, Memory=0x%lx, Command=0x%lx\n",
+ io, mem, command);
- pci_hose_write_config_dword(hose, dev, PCI_COMMAND, 0);
+ pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0);
- for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_5; bar += 4)
- {
- pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
- pci_hose_read_config_dword(hose, dev, bar, &bar_response);
+ for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_5; bar += 4) {
+ pci_hose_write_config_dword (hose, dev, bar, 0xffffffff);
+ pci_hose_read_config_dword (hose, dev, bar, &bar_response);
if (!bar_response)
continue;
@@ -326,51 +316,51 @@ int pci_hose_config_device(struct pci_controller *hose,
found_mem64 = 0;
/* Check the BAR type and set our address mask */
- if (bar_response & PCI_BASE_ADDRESS_SPACE)
- {
+ if (bar_response & PCI_BASE_ADDRESS_SPACE) {
bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1;
- bar_value = io;
-
+ /* round up region base address to a multiple of size */
io = ((io - 1) | (bar_size - 1)) + 1;
- }
- else
- {
- if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
- PCI_BASE_ADDRESS_MEM_TYPE_64)
+ bar_value = io;
+ /* compute new region base address */
+ io = io + bar_size;
+ } else {
+ if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
+ PCI_BASE_ADDRESS_MEM_TYPE_64)
found_mem64 = 1;
bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1;
- bar_value = mem;
+ /* round up region base address to multiple of size */
mem = ((mem - 1) | (bar_size - 1)) + 1;
+ bar_value = mem;
+ /* compute new region base address */
+ mem = mem + bar_size;
}
/* Write it out and update our limit */
- pci_hose_write_config_dword(hose, dev, bar, bar_value);
+ pci_hose_write_config_dword (hose, dev, bar, bar_value);
- if (found_mem64)
- {
+ if (found_mem64) {
bar += 4;
- pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
+ pci_hose_write_config_dword (hose, dev, bar, 0x00000000);
}
}
/* Configure Cache Line Size Register */
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+ pci_hose_write_config_byte (hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
/* Configure Latency Timer */
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte (hose, dev, PCI_LATENCY_TIMER, 0x80);
/* Disable interrupt line, if device says it wants to use interrupts */
- pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin);
- if (pin != 0)
- {
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 0xff);
+ pci_hose_read_config_byte (hose, dev, PCI_INTERRUPT_PIN, &pin);
+ if (pin != 0) {
+ pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, 0xff);
}
- pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &old_command);
- pci_hose_write_config_dword(hose, dev, PCI_COMMAND,
- (old_command & 0xffff0000) | command );
+ pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &old_command);
+ pci_hose_write_config_dword (hose, dev, PCI_COMMAND,
+ (old_command & 0xffff0000) | command);
return 0;
}
@@ -389,15 +379,13 @@ struct pci_config_table *pci_find_config(struct pci_controller *hose,
{
struct pci_config_table *table;
- for (table = hose->config_table; table && table->vendor; table++)
- {
+ for (table = hose->config_table; table && table->vendor; table++) {
if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) &&
(table->device == PCI_ANY_ID || table->device == device) &&
(table->class == PCI_ANY_ID || table->class == class) &&
(table->bus == PCI_ANY_ID || table->bus == bus) &&
(table->dev == PCI_ANY_ID || table->dev == dev) &&
- (table->func == PCI_ANY_ID || table->func == func))
- {
+ (table->func == PCI_ANY_ID || table->func == func)) {
return table;
}
}