diff options
293 files changed, 8387 insertions, 2714 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index c8386ab619..0cf2602535 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -196,7 +196,8 @@ F: drivers/mtd/cfi_flash.c F: drivers/mtd/jedec_flash.c COLDFIRE -M: Jason Jin <jason.jin@freescale.com> +M: Huan Wang <alison.wang@freescale.com> +M: Angelo Dureghello <angelo@sysam.it> S: Maintained T: git git://git.denx.de/u-boot-coldfire.git F: arch/m68k/ @@ -390,6 +391,7 @@ T: git git://git.denx.de/u-boot-tq-group.git UBI M: Kyungmin Park <kmpark@infradead.org> +M: Heiko Schocher <hs@denx.de> S: Maintained T: git git://git.denx.de/u-boot-ubi.git F: drivers/mtd/ubi/ @@ -503,6 +503,7 @@ autoconf_is_current := $(if $(wildcard $(KCONFIG_CONFIG)),$(shell find . \ -path ./include/config/auto.conf -newer $(KCONFIG_CONFIG))) ifneq ($(autoconf_is_current),) include $(srctree)/config.mk +include $(srctree)/arch/$(ARCH)/Makefile endif # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use @@ -601,17 +602,11 @@ c_flags := $(KBUILD_CFLAGS) $(cpp_flags) ######################################################################### # U-Boot objects....order is important (i.e. start must be first) -head-y := $(CPUDIR)/start.o -head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o -head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o - HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) libs-y += lib/ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ -libs-y += $(CPUDIR)/ libs-$(CONFIG_OF_EMBED) += dts/ -libs-y += arch/$(ARCH)/lib/ libs-y += fs/ libs-y += net/ libs-y += disk/ @@ -645,23 +640,11 @@ libs-y += drivers/usb/musb-new/ libs-y += drivers/usb/phy/ libs-y += drivers/usb/ulpi/ libs-y += common/ -libs-y += lib/libfdt/ libs-$(CONFIG_API) += api/ libs-$(CONFIG_HAS_POST) += post/ libs-y += test/ libs-y += test/dm/ -ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610)) -libs-y += arch/$(ARCH)/imx-common/ -endif - -ifneq (,$(filter $(SOC), armada-xp kirkwood)) -libs-y += arch/$(ARCH)/mvebu-common/ -endif - -libs-$(CONFIG_ARM) += arch/arm/cpu/ -libs-$(CONFIG_PPC) += arch/powerpc/cpu/ - libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) libs-y := $(sort $(libs-y)) @@ -980,6 +963,9 @@ u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin \ $(objtree)/tools/ifdtool -w \ $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin \ u-boot.tmp + $(objtree)/tools/ifdtool -w \ + $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILENAME) \ + u-boot.tmp mv u-boot.tmp $@ OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec @@ -3661,10 +3661,13 @@ FIT uImage format: CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS, - CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION - Address, size and partition on the MMC to load U-Boot from + Address and partition on the MMC to load U-Boot from when the MMC is being used in raw mode. + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION + Partition on the MMC to load U-Boot from when the MMC is being + used in raw mode + CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR Sector to load kernel uImage from when MMC is being used in raw mode (for Falcon mode) @@ -3675,6 +3678,10 @@ FIT uImage format: parameters from when MMC is being used in raw mode (for falcon mode) + CONFIG_SYS_MMCSD_FS_BOOT_PARTITION + Partition on the MMC to load U-Boot from when the MMC is being + used in fs mode + CONFIG_SPL_FAT_SUPPORT Support for fs/fat/libfat.o in SPL binary diff --git a/arch/arc/Makefile b/arch/arc/Makefile new file mode 100644 index 0000000000..de25cc9921 --- /dev/null +++ b/arch/arc/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/arc/cpu/$(CPU)/start.o + +libs-y += arch/arc/cpu/$(CPU)/ +libs-y += arch/arc/lib/ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b9ac59e1a4..7a64b665c6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -396,8 +396,8 @@ config TARGET_MX35PDK bool "Support mx35pdk" select CPU_ARM1136 -config TARGET_RPI_B - bool "Support rpi_b" +config TARGET_RPI + bool "Support rpi" select CPU_ARM1176 config TARGET_TNETV107X_EVM @@ -793,6 +793,7 @@ config ARCH_UNIPHIER bool "Panasonic UniPhier platform" select CPU_V7 select SUPPORT_SPL + select OF_CONTROL if !SPL_BUILD endchoice @@ -930,7 +931,7 @@ source "board/palmtreo680/Kconfig" source "board/phytec/pcm051/Kconfig" source "board/ppcag/bg0900/Kconfig" source "board/pxa255_idp/Kconfig" -source "board/raspberrypi/rpi_b/Kconfig" +source "board/raspberrypi/rpi/Kconfig" source "board/ronetix/pm9261/Kconfig" source "board/ronetix/pm9263/Kconfig" source "board/ronetix/pm9g45/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile new file mode 100644 index 0000000000..ebb7dc34ac --- /dev/null +++ b/arch/arm/Makefile @@ -0,0 +1,29 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/arm/cpu/$(CPU)/start.o + +ifeq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_SPL_START_S_PATH),) +head-y := $(CONFIG_SPL_START_S_PATH:"%"=%)/start.o +endif +endif + +libs-y += arch/arm/cpu/$(CPU)/ +libs-y += arch/arm/cpu/ +libs-y += arch/arm/lib/ + +ifeq ($(CONFIG_SPL_BUILD),y) +ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35)) +libs-y += arch/arm/imx-common/ +endif +else +ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610)) +libs-y += arch/arm/imx-common/ +endif +endif + +ifneq (,$(filter $(SOC), armada-xp kirkwood)) +libs-y += arch/arm/mvebu-common/ +endif diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index fb535eb9ec..cb18908867 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -33,8 +33,19 @@ void save_omap_boot_params(void) * used. But it not correct to assume that romcode structure * encoding would be same as u-boot. So use the defined offsets. */ - gd->arch.omap_boot_params.omap_bootdevice = boot_device = - *((u8 *)(rom_params + BOOT_DEVICE_OFFSET)); + boot_device = *((u8 *)(rom_params + BOOT_DEVICE_OFFSET)); + +#if defined(BOOT_DEVICE_NAND_I2C) + /* + * Re-map NAND&I2C boot-device to the "normal" NAND boot-device. + * Otherwise the SPL boot IF can't handle this device correctly. + * Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens + * Draco leads to this boot-device passed to SPL from the BootROM. + */ + if (boot_device == BOOT_DEVICE_NAND_I2C) + boot_device = BOOT_DEVICE_NAND; +#endif + gd->arch.omap_boot_params.omap_bootdevice = boot_device; gd->arch.omap_boot_params.ch_flags = *((u8 *)(rom_params + CH_FLAGS_OFFSET)); @@ -57,7 +68,7 @@ void save_omap_boot_params(void) } } -#ifdef CONFIG_DRA7XX +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) /* * We get different values for QSPI_1 and QSPI_4 being used, but * don't actually care about this difference. Rather than diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index c8e9bc86e5..e601ba1886 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -1226,13 +1226,14 @@ void dmm_init(u32 base) emif1_enabled = 1; emif2_enabled = 1; break; - } else if (valid == 1) { + } + + if (valid == 1) emif1_enabled = 1; - } else if (valid == 2) { + + if (valid == 2) emif2_enabled = 1; - } } - } static void do_bug0039_workaround(u32 base) diff --git a/arch/arm/cpu/armv7/omap5/Kconfig b/arch/arm/cpu/armv7/omap5/Kconfig index 129982caca..aca862d2b2 100644 --- a/arch/arm/cpu/armv7/omap5/Kconfig +++ b/arch/arm/cpu/armv7/omap5/Kconfig @@ -12,6 +12,9 @@ config TARGET_OMAP5_UEVM config TARGET_DRA7XX_EVM bool "TI DRA7XX" +config TARGET_BEAGLE_X15 + bool "BeagleBoard X15" + endchoice config SYS_SOC @@ -20,5 +23,6 @@ config SYS_SOC source "board/compulab/cm_t54/Kconfig" source "board/ti/omap5_uevm/Kconfig" source "board/ti/dra7xx/Kconfig" +source "board/ti/beagle_x15/Kconfig" endif diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 025738302a..95f16866e6 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -365,31 +365,31 @@ struct vcores_data dra752_volts = { .mpu.value = VDD_MPU_DRA752, .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM, .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .mpu.addr = TPS659038_REG_ADDR_SMPS12_MPU, + .mpu.addr = TPS659038_REG_ADDR_SMPS12, .mpu.pmic = &tps659038, .eve.value = VDD_EVE_DRA752, .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM, .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .eve.addr = TPS659038_REG_ADDR_SMPS45_EVE, + .eve.addr = TPS659038_REG_ADDR_SMPS45, .eve.pmic = &tps659038, .gpu.value = VDD_GPU_DRA752, .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM, .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .gpu.addr = TPS659038_REG_ADDR_SMPS6_GPU, + .gpu.addr = TPS659038_REG_ADDR_SMPS6, .gpu.pmic = &tps659038, .core.value = VDD_CORE_DRA752, .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM, .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .core.addr = TPS659038_REG_ADDR_SMPS7_CORE, + .core.addr = TPS659038_REG_ADDR_SMPS7, .core.pmic = &tps659038, .iva.value = VDD_IVA_DRA752, .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM, .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .iva.addr = TPS659038_REG_ADDR_SMPS8_IVA, + .iva.addr = TPS659038_REG_ADDR_SMPS8, .iva.pmic = &tps659038, }; @@ -593,7 +593,7 @@ const struct ctrl_ioregs ioregs_dra72x_es1 = { .ctrl_ddr_ctrl_ext_0 = 0xA2000000, }; -void hw_data_init(void) +void __weak hw_data_init(void) { u32 omap_rev = omap_revision(); diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index ff08ef4247..0745d424e2 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -376,6 +376,7 @@ struct omap_sys_ctrl_regs const omap5_ctrl = { struct omap_sys_ctrl_regs const dra7xx_ctrl = { .control_status = 0x4A002134, + .control_phy_power_usb = 0x4A002370, .control_phy_power_sata = 0x4A002374, .control_core_mac_id_0_lo = 0x4A002514, .control_core_mac_id_0_hi = 0x4A002518, @@ -800,6 +801,7 @@ struct prcm_regs const dra7xx_prcm = { .cm_clkmode_dpll_dsp = 0x4a005234, .cm_shadow_freq_config1 = 0x4a005260, .cm_clkmode_dpll_gmac = 0x4a0052a8, + .cm_coreaon_usb_phy_core_clkctrl = 0x4a008640, .cm_coreaon_usb_phy2_core_clkctrl = 0x4a008688, /* cm1.mpu */ @@ -906,6 +908,7 @@ struct prcm_regs const dra7xx_prcm = { .cm_gmac_gmac_clkctrl = 0x4a0093d0, .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0, .cm_l3init_ocp2scp3_clkctrl = 0x4a0093e8, + .cm_l3init_usb_otg_ss_clkctrl = 0x4a0093f0, /* cm2.l4per */ .cm_l4per_clkstctrl = 0x4a009700, diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 065199be76..7d8cec08c2 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -513,7 +513,7 @@ const struct lpddr2_mr_regs mr_regs = { .mr16 = MR16_REF_FULL_ARRAY }; -static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, +void __weak emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size) { diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index 36b7f11fbe..97602990aa 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -5,15 +5,17 @@ config SYS_SOC default "uniphier" config SYS_CONFIG_NAME - default "ph1_pro4" if MACH_PH1_PRO4 - default "ph1_ld4" if MACH_PH1_LD4 - default "ph1_sld8" if MACH_PH1_SLD8 + default "uniphier" + +config UNIPHIER_SMP + bool choice prompt "UniPhier SoC select" config MACH_PH1_PRO4 bool "PH1-Pro4" + select UNIPHIER_SMP config MACH_PH1_LD4 bool "PH1-LD4" @@ -23,6 +25,29 @@ config MACH_PH1_SLD8 endchoice +choice + prompt "UniPhier Support Card select" + optional + +config PFC_MICRO_SUPPORT_CARD + bool "Support card with PFC CPLD" + help + This option provides support for the expansion board with PFC + original address mapping. + + Say Y to use the on-board UART, Ether, LED devices. + +config DCC_MICRO_SUPPORT_CARD + bool "Support card with DCC CPLD" + help + This option provides support for the expansion board with DCC- + arranged address mapping that is compatible with legacy UniPhier + reference boards. + + Say Y to use the on-board UART, Ether, LED devices. + +endchoice + config CMD_PINMON bool "Enable boot mode pins monitor command" depends on !SPL_BUILD diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile index 0f64d2591c..4a7b8a9d08 100644 --- a/arch/arm/cpu/armv7/uniphier/Makefile +++ b/arch/arm/cpu/armv7/uniphier/Makefile @@ -11,6 +11,7 @@ obj-y += cache_uniphier.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o obj-y += dram_init.o obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o +obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o obj-$(CONFIG_UNIPHIER_SMP) += smp.o obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o diff --git a/arch/arm/cpu/armv7/uniphier/board_early_init_r.c b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c new file mode 100644 index 0000000000..cb7e04fc36 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/board.h> + +int board_early_init_r(void) +{ + uniphier_board_late_init(); + return 0; +} diff --git a/arch/arm/cpu/armv7/uniphier/board_late_init.c b/arch/arm/cpu/armv7/uniphier/board_late_init.c index 37300206f6..0622a1e16e 100644 --- a/arch/arm/cpu/armv7/uniphier/board_late_init.c +++ b/arch/arm/cpu/armv7/uniphier/board_late_init.c @@ -26,42 +26,6 @@ static void nand_denali_wp_disable(void) #endif } -static void nand_denali_fixup(void) -{ -#if defined(CONFIG_NAND_DENALI) && \ - (defined(CONFIG_MACH_PH1_SLD8) || defined(CONFIG_MACH_PH1_PRO4)) - /* - * The Denali NAND controller on some of UniPhier SoCs does not - * automatically query the device parameters. For those SoCs, - * some registers must be set after the device is probed. - */ - void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; - struct mtd_info *mtd; - struct nand_chip *chip; - - if (nand_curr_device < 0 || - nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE) { - /* NAND was not detected. Just return. */ - return; - } - - mtd = &nand_info[nand_curr_device]; - chip = mtd->priv; - - writel(mtd->erasesize / mtd->writesize, denali_reg + PAGES_PER_BLOCK); - writel(0, denali_reg + DEVICE_WIDTH); - writel(mtd->writesize, denali_reg + DEVICE_MAIN_AREA_SIZE); - writel(mtd->oobsize, denali_reg + DEVICE_SPARE_AREA_SIZE); - writel(1, denali_reg + DEVICES_CONNECTED); - - /* - * chip->scan_bbt in nand_scan_tail() has been skipped. - * It should be done in here. - */ - chip->scan_bbt(mtd); -#endif -} - int board_late_init(void) { puts("MODE: "); @@ -70,7 +34,6 @@ int board_late_init(void) case BOOT_DEVICE_MMC1: printf("eMMC Boot\n"); setenv("bootmode", "emmcboot"); - nand_denali_fixup(); break; case BOOT_DEVICE_NAND: printf("NAND Boot\n"); @@ -80,7 +43,6 @@ int board_late_init(void) case BOOT_DEVICE_NOR: printf("NOR Boot\n"); setenv("bootmode", "norboot"); - nand_denali_fixup(); break; default: printf("Unsupported Boot Mode\n"); diff --git a/arch/arm/cpu/armv7/uniphier/init_page_table.c b/arch/arm/cpu/armv7/uniphier/init_page_table.c index d2738350a3..a0d10a995d 100644 --- a/arch/arm/cpu/armv7/uniphier/init_page_table.c +++ b/arch/arm/cpu/armv7/uniphier/init_page_table.c @@ -28,7 +28,12 @@ #define IS_SSC(x) ((IS_SPL_TEXT_AREA(x)) || \ (IS_INIT_STACK_AREA(x))) #define IS_EXT(x) ((x) < 0x100) -#define IS_REG(x) (0x500 <= (x) && (x) < 0x700) + +/* 0x20000000-0x2fffffff, 0xf0000000-0xffffffff are only used by PH1-sLD3 */ +#define IS_REG(x) (0x200 <= (x) && (x) < 0x300) || \ + (0x500 <= (x) && (x) < 0x700) || \ + (0xf00 <= (x)) + #define IS_DDR(x) (0x800 <= (x) && (x) < 0xf00) #define MMU_FLAGS(x) (IS_SSC(x)) ? SSC : \ diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index fba1cc7498..5d682d3ca3 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c index 62f5b0148d..9d51299308 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index 74129bc86a..fd1c432f4f 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c index 1843d0469f..31ee2a2100 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c index f113db54d1..3c82a1aca4 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c @@ -22,16 +22,7 @@ void sbc_init(void) writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); - if (readl(SBBASE0) & 0x1) { - /* - * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x3effffff: memory bank (31MB) - * 0x03f00000-0x3fffffff: peripherals (1MB) - */ - writel(0x0000be01, SBBASE0); /* dummy */ - writel(0x0200be01, SBBASE1); - } else { + if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. @@ -40,6 +31,15 @@ void sbc_init(void) * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals */ writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x00000000-0x01ffffff: mask ROM + * 0x02000000-0x3effffff: memory bank (31MB) + * 0x03f00000-0x3fffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); } #elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD) #if !defined(CONFIG_SPL_BUILD) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index fba1cc7498..5d682d3ca3 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c index 72ec599f69..ea0691dd67 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/cpu/armv7/uniphier/support_card.c b/arch/arm/cpu/armv7/uniphier/support_card.c index 40d49409c2..419012e1ab 100644 --- a/arch/arm/cpu/armv7/uniphier/support_card.c +++ b/arch/arm/cpu/armv7/uniphier/support_card.c @@ -83,6 +83,12 @@ static int support_card_show_revision(void) } #endif +int check_support_card(void) +{ + printf("SC: Micro Support Card "); + return support_card_show_revision(); +} + void support_card_init(void) { /* @@ -94,12 +100,6 @@ void support_card_init(void) support_card_reset_deassert(); } -int check_support_card(void) -{ - printf("SC: Micro Support Card "); - return support_card_show_revision(); -} - #if defined(CONFIG_SMC911X) #include <netdev.h> @@ -112,18 +112,14 @@ int board_eth_init(bd_t *bis) #if !defined(CONFIG_SYS_NO_FLASH) #include <mtd/cfi_flash.h> +#include <asm/arch/sbc-regs.h> -#if CONFIG_SYS_MAX_FLASH_BANKS > 1 -static phys_addr_t flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS] = - CONFIG_SYS_FLASH_BANKS_LIST; +struct memory_bank { + phys_addr_t base; + unsigned long size; +}; -phys_addr_t cfi_flash_bank_addr(int i) -{ - return flash_banks_list[i]; -} -#endif - -int mem_is_flash(phys_addr_t base) +static int mem_is_flash(const struct memory_bank *mem) { const int loop = 128; u32 *scratch_addr; @@ -131,8 +127,9 @@ int mem_is_flash(phys_addr_t base) int ret = 1; int i; - scratch_addr = map_physmem(base + 0x01e00000, - sizeof(u32) * loop, MAP_NOCACHE); + /* just in case, use the tail of the memory bank */ + scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop, + sizeof(u32) * loop, MAP_NOCACHE); for (i = 0; i < loop; i++, scratch_addr++) { saved_value = readl(scratch_addr); @@ -150,31 +147,79 @@ int mem_is_flash(phys_addr_t base) return ret; } -int board_flash_wp_on(void) +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) + /* {address, size} */ +static const struct memory_bank memory_banks_boot_swap_off[] = { + {0x02000000, 0x01f00000}, +}; + +static const struct memory_bank memory_banks_boot_swap_on[] = { + {0x00000000, 0x01f00000}, +}; +#endif + +#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +static const struct memory_bank memory_banks_boot_swap_off[] = { + {0x04000000, 0x04000000}, +}; + +static const struct memory_bank memory_banks_boot_swap_on[] = { + {0x00000000, 0x04000000}, + {0x04000000, 0x04000000}, +}; +#endif + +static const struct memory_bank +*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; + +phys_addr_t cfi_flash_bank_addr(int i) { - int i; - int ret = 1; + return flash_banks_list[i]->base; +} - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - if (mem_is_flash(cfi_flash_bank_addr(i))) { - /* - * We found at least one flash. - * We need to return 0 and call flash_init(). - */ - ret = 0; - } -#if CONFIG_SYS_MAX_FLASH_BANKS > 1 - else { - /* - * We might have a SRAM here. - * To prevent SRAM data from being destroyed, - * we set dummy address (SDRAM). - */ - flash_banks_list[i] = 0x80000000 + 0x10000 * i; +unsigned long cfi_flash_bank_size(int i) +{ + return flash_banks_list[i]->size; +} + +static void detect_num_flash_banks(void) +{ + const struct memory_bank *memory_bank, *end; + + cfi_flash_num_flash_banks = 0; + + if (boot_is_swapped()) { + memory_bank = memory_banks_boot_swap_on; + end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on); + } else { + memory_bank = memory_banks_boot_swap_off; + end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off); + } + + for (; memory_bank < end; memory_bank++) { + if (cfi_flash_num_flash_banks >= + CONFIG_SYS_MAX_FLASH_BANKS_DETECT) + break; + + if (mem_is_flash(memory_bank)) { + flash_banks_list[cfi_flash_num_flash_banks] = + memory_bank; + + debug("flash bank found: base = 0x%lx, size = 0x%lx\n", + memory_bank->base, memory_bank->size); + cfi_flash_num_flash_banks++; } -#endif } - return ret; + debug("number of flash banks: %d\n", cfi_flash_num_flash_banks); +} +#else /* ONFIG_SYS_NO_FLASH */ +void detect_num_flash_banks(void) +{ +}; +#endif /* ONFIG_SYS_NO_FLASH */ + +void support_card_late_init(void) +{ + detect_num_flash_banks(); } -#endif diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e5846eac6f..187d58c498 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -32,6 +32,11 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra114-dalmore.dtb \ tegra124-jetson-tk1.dtb \ tegra124-venice2.dtb +dtb-$(CONFIG_ARCH_UNIPHIER) += \ + uniphier-ph1-sld3-ref.dtb \ + uniphier-ph1-pro4-ref.dtb \ + uniphier-ph1-ld4-ref.dtb \ + uniphier-ph1-sld8-ref.dtb dtb-$(CONFIG_ZYNQ) += zynq-zc702.dtb \ zynq-zc706.dtb \ zynq-zed.dtb \ diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts new file mode 100644 index 0000000000..08bbd032c9 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts @@ -0,0 +1,61 @@ +/* + * Device Tree Source for UniPhier PH1-LD4 Reference Board + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-ld4.dtsi" + +/ { + model = "Panasonic UniPhier PH1-LD4 Reference Board"; + compatible = "panasonic,ph1-ld4-ref", "panasonic,ph1-ld4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + stdout-path = &uart0; + }; + + aliases { + uart0 = &uart0; + uart1 = &uart1; + uart2 = &uart2; + uart3 = &uart3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + eeprom { + compatible = "i2c-eeprom"; + reg = <0x50>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ph1-ld4.dtsi b/arch/arm/dts/uniphier-ph1-ld4.dtsi new file mode 100644 index 0000000000..2a3dd73ead --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-ld4.dtsi @@ -0,0 +1,120 @@ +/* + * Device Tree Source for UniPhier PH1-LD4 SoC + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "panasonic,ph1-ld4"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@54006800 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x20>; + clock-frequency = <36864000>; + }; + + uart1: serial@54006900 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x20>; + clock-frequency = <36864000>; + }; + + uart2: serial@54006a00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x20>; + clock-frequency = <36864000>; + }; + + uart3: serial@54006b00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x20>; + clock-frequency = <36864000>; + }; + + i2c0: i2c@58400000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58400000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@58480000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58480000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@58500000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58500000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c3: i2c@58580000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58580000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + usb0: usb@5a800100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + }; + + usb1: usb@5a810100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + }; + + usb2: usb@5a820100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + }; + + nand: nand@68000000 { + compatible = "denali,denali-nand-dt"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + reg-names = "nand_data", "denali_reg"; + }; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts new file mode 100644 index 0000000000..23add7cfd0 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts @@ -0,0 +1,63 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 Reference Board + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro4.dtsi" + +/ { + model = "Panasonic UniPhier PH1-Pro4 Reference Board"; + compatible = "panasonic,ph1-pro4-ref", "panasonic,ph1-pro4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + stdout-path = &uart0; + }; + + aliases { + uart0 = &uart0; + uart1 = &uart1; + uart2 = &uart2; + uart3 = &uart3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + eeprom { + compatible = "i2c-eeprom"; + reg = <0x50>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ph1-pro4.dtsi b/arch/arm/dts/uniphier-ph1-pro4.dtsi new file mode 100644 index 0000000000..49e375e8d2 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-pro4.dtsi @@ -0,0 +1,140 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 SoC + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "panasonic,ph1-pro4"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@54006800 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x20>; + clock-frequency = <73728000>; + }; + + uart1: serial@54006900 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x20>; + clock-frequency = <73728000>; + }; + + uart2: serial@54006a00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x20>; + clock-frequency = <73728000>; + }; + + uart3: serial@54006b00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x20>; + clock-frequency = <73728000>; + }; + + i2c0: i2c@58780000 { + compatible = "panasonic,uniphier-fi2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58780000 0x80>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@58781000 { + compatible = "panasonic,uniphier-fi2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58781000 0x80>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@58782000 { + compatible = "panasonic,uniphier-fi2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58782000 0x80>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c3: i2c@58783000 { + compatible = "panasonic,uniphier-fi2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58783000 0x80>; + clock-frequency = <100000>; + status = "disabled"; + }; + + /* i2c4 does not exist */ + + i2c5: i2c@58785000 { + compatible = "panasonic,uniphier-fi2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58785000 0x80>; + clock-frequency = <400000>; + status = "ok"; + }; + + i2c6: i2c@58786000 { + compatible = "panasonic,uniphier-fi2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58786000 0x80>; + clock-frequency = <400000>; + status = "ok"; + }; + + usb0: usb@5a800100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + }; + + usb1: usb@5a810100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + }; + + nand: nand@68000000 { + compatible = "denali,denali-nand-dt"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + reg-names = "nand_data", "denali_reg"; + }; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/dts/uniphier-ph1-sld3-ref.dts new file mode 100644 index 0000000000..91b4dbe0b1 --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-sld3-ref.dts @@ -0,0 +1,60 @@ +/* + * Device Tree Source for UniPhier PH1-sLD3 Reference Board + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-sld3.dtsi" + +/ { + model = "Panasonic UniPhier PH1-sLD3 Reference Board"; + compatible = "panasonic,ph1-sld3-ref", "panasonic,ph1-sld3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + stdout-path = &uart0; + }; + + aliases { + uart0 = &uart0; + uart1 = &uart1; + uart2 = &uart2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + eeprom { + compatible = "i2c-eeprom"; + reg = <0x50>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld3.dtsi b/arch/arm/dts/uniphier-ph1-sld3.dtsi new file mode 100644 index 0000000000..f5529d2e6e --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-sld3.dtsi @@ -0,0 +1,125 @@ +/* + * Device Tree Source for UniPhier PH1-sLD3 SoC + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "panasonic,ph1-sld3"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@54006800 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x20>; + clock-frequency = <36864000>; + }; + + uart1: serial@54006900 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x20>; + clock-frequency = <36864000>; + }; + + uart2: serial@54006a00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x20>; + clock-frequency = <36864000>; + }; + + i2c0: i2c@58400000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58400000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@58480000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58480000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@58500000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58500000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c3: i2c@58580000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58580000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + usb0: usb@5a800100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + }; + + usb1: usb@5a810100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + }; + + usb2: usb@5a820100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + }; + + usb3: usb@5a830100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a830100 0x100>; + }; + + nand: nand@f8000000 { + compatible = "denali,denali-nand-dt"; + reg = <0xf8000000 0x20>, <0xf8100000 0x1000>; + reg-names = "nand_data", "denali_reg"; + }; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts new file mode 100644 index 0000000000..a8ce049d6c --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts @@ -0,0 +1,61 @@ +/* + * Device Tree Source for UniPhier PH1-sLD8 Reference Board + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-sld8.dtsi" + +/ { + model = "Panasonic UniPhier PH1-sLD8 Reference Board"; + compatible = "panasonic,ph1-sld8-ref", "panasonic,ph1-sld8"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk"; + stdout-path = &uart0; + }; + + aliases { + uart0 = &uart0; + uart1 = &uart1; + uart2 = &uart2; + uart3 = &uart3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + eeprom { + compatible = "i2c-eeprom"; + reg = <0x50>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld8.dtsi b/arch/arm/dts/uniphier-ph1-sld8.dtsi new file mode 100644 index 0000000000..0ea76e59fc --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-sld8.dtsi @@ -0,0 +1,120 @@ +/* + * Device Tree Source for UniPhier PH1-sLD8 SoC + * + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "panasonic,ph1-sld8"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + uart0: serial@54006800 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x20>; + clock-frequency = <80000000>; + }; + + uart1: serial@54006900 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x20>; + clock-frequency = <80000000>; + }; + + uart2: serial@54006a00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x20>; + clock-frequency = <80000000>; + }; + + uart3: serial@54006b00 { + compatible = "panasonic,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x20>; + clock-frequency = <80000000>; + }; + + i2c0: i2c@58400000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58400000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@58480000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58480000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@58500000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58500000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c3: i2c@58580000 { + compatible = "panasonic,uniphier-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x58580000 0x40>; + clock-frequency = <100000>; + status = "disabled"; + }; + + usb0: usb@5a800100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + }; + + usb1: usb@5a810100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + }; + + usb2: usb@5a820100 { + compatible = "panasonic,uniphier-ehci", "usb-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + }; + + nand: nand@68000000 { + compatible = "denali,denali-nand-dt"; + reg = <0x68000000 0x20>, <0x68100000 0x1000>; + reg-names = "nand_data", "denali_reg"; + }; + }; +}; diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 8543f4399c..e756418a59 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -25,6 +25,7 @@ #else #define BOOT_DEVICE_XIP 2 #define BOOT_DEVICE_NAND 5 +#define BOOT_DEVICE_NAND_I2C 6 #if defined(CONFIG_AM33XX) #define BOOT_DEVICE_MMC1 8 #define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h index 61f427d914..0289ba6a91 100644 --- a/arch/arm/include/asm/arch-bcm2835/mbox.h +++ b/arch/arm/include/asm/arch-bcm2835/mbox.h @@ -119,6 +119,39 @@ struct bcm2835_mbox_tag_hdr { * }; */ +#define BCM2835_MBOX_TAG_GET_BOARD_REV 0x00010002 + +/* + * 0x2..0xf from: + * http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/ + * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=32733 + * 0x10, 0x11 from swarren's testing + */ +#define BCM2835_BOARD_REV_B_I2C0_2 0x2 +#define BCM2835_BOARD_REV_B_I2C0_3 0x3 +#define BCM2835_BOARD_REV_B_I2C1_4 0x4 +#define BCM2835_BOARD_REV_B_I2C1_5 0x5 +#define BCM2835_BOARD_REV_B_I2C1_6 0x6 +#define BCM2835_BOARD_REV_A_7 0x7 +#define BCM2835_BOARD_REV_A_8 0x8 +#define BCM2835_BOARD_REV_A_9 0x9 +#define BCM2835_BOARD_REV_B_REV2_d 0xd +#define BCM2835_BOARD_REV_B_REV2_e 0xe +#define BCM2835_BOARD_REV_B_REV2_f 0xf +#define BCM2835_BOARD_REV_B_PLUS 0x10 +#define BCM2835_BOARD_REV_CM 0x11 + +struct bcm2835_mbox_tag_get_board_rev { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + } req; + struct { + u32 rev; + } resp; + } body; +}; + #define BCM2835_MBOX_TAG_GET_MAC_ADDRESS 0x00010003 struct bcm2835_mbox_tag_get_mac_address { diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index 30d9de2764..0dc584b8ce 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -278,11 +278,11 @@ /* TPS659038 */ #define TPS659038_I2C_SLAVE_ADDR 0x58 -#define TPS659038_REG_ADDR_SMPS12_MPU 0x23 -#define TPS659038_REG_ADDR_SMPS45_EVE 0x2B -#define TPS659038_REG_ADDR_SMPS6_GPU 0x2F -#define TPS659038_REG_ADDR_SMPS7_CORE 0x33 -#define TPS659038_REG_ADDR_SMPS8_IVA 0x37 +#define TPS659038_REG_ADDR_SMPS12 0x23 +#define TPS659038_REG_ADDR_SMPS45 0x2B +#define TPS659038_REG_ADDR_SMPS6 0x2F +#define TPS659038_REG_ADDR_SMPS7 0x33 +#define TPS659038_REG_ADDR_SMPS8 0x37 /* TPS */ #define TPS62361_I2C_SLAVE_ADDR 0x60 @@ -314,7 +314,7 @@ */ #define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC 31219 -#ifdef CONFIG_DRA7XX +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) #define V_OSCK 20000000 /* Clock output from T2 */ #else #define V_OSCK 19200000 /* Clock output from T2 */ diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index b9600cf42d..e2181598d5 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -27,7 +27,7 @@ #define CONTROL_CORE_ID_CODE 0x4A002204 #define CONTROL_WKUP_ID_CODE 0x4AE0C204 -#ifdef CONFIG_DRA7XX +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) #define CONTROL_ID_CODE CONTROL_WKUP_ID_CODE #else #define CONTROL_ID_CODE CONTROL_CORE_ID_CODE @@ -163,7 +163,7 @@ struct s32ktimer { * much larger) and do not, at this time, make use of the additional * space. */ -#ifdef CONFIG_DRA7XX +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */ #else diff --git a/arch/arm/include/asm/arch-uniphier/board.h b/arch/arm/include/asm/arch-uniphier/board.h index e6ba4e4ee4..e3cba5befe 100644 --- a/arch/arm/include/asm/arch-uniphier/board.h +++ b/arch/arm/include/asm/arch-uniphier/board.h @@ -12,10 +12,12 @@ defined(CONFIG_DCC_MICRO_SUPPORT_CARD) void support_card_reset(void); void support_card_init(void); +void support_card_late_init(void); int check_support_card(void); #else #define support_card_reset() do {} while (0) #define support_card_init() do {} while (0) +#define support_card_late_init() do {} while (0) static inline int check_support_card(void) { return 0; @@ -32,4 +34,9 @@ static inline void uniphier_board_init(void) support_card_init(); } +static inline void uniphier_board_late_init(void) +{ + support_card_late_init(); +} + #endif /* ARCH_BOARD_H */ diff --git a/arch/arm/include/asm/arch-uniphier/gpio.h b/arch/arm/include/asm/arch-uniphier/gpio.h new file mode 100644 index 0000000000..1fc4e19a61 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/gpio.h @@ -0,0 +1,6 @@ +/* + * Dummy header file to enable CONFIG_OF_CONTROL. + * If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled. + * It includes <asm/arch/gpio.h> via <asm/gpio.h>, so those SoCs that enable + * OF_CONTROL must have arch/gpio.h even if GPIO is not supported. + */ diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 183823404d..323952f5f1 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -540,6 +540,7 @@ extern struct prcm_regs const omap5_es2_prcm; extern struct prcm_regs const omap4_prcm; extern struct prcm_regs const dra7xx_prcm; extern struct dplls const **dplls_data; +extern struct dplls dra7xx_dplls; extern struct vcores_data const **omap_vcores; extern const u32 sys_clk_array[8]; extern struct omap_sys_ctrl_regs const **ctrl; @@ -547,6 +548,8 @@ extern struct omap_sys_ctrl_regs const omap4_ctrl; extern struct omap_sys_ctrl_regs const omap5_ctrl; extern struct omap_sys_ctrl_regs const dra7xx_ctrl; +extern struct pmic_data tps659038; + void hw_data_init(void); const struct dpll_params *get_mpu_dpll_params(struct dplls const *); diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile new file mode 100644 index 0000000000..e9b3184379 --- /dev/null +++ b/arch/avr32/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/avr32/cpu/start.o + +libs-y += arch/avr32/cpu/ +libs-y += arch/avr32/lib/ diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile new file mode 100644 index 0000000000..787475e130 --- /dev/null +++ b/arch/blackfin/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/blackfin/cpu/start.o + +libs-y += arch/blackfin/cpu/ +libs-y += arch/blackfin/lib/ diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h index 69f08bc7ef..aadb0d2d4e 100644 --- a/arch/blackfin/include/asm/io.h +++ b/arch/blackfin/include/asm/io.h @@ -11,10 +11,9 @@ #ifdef __KERNEL__ +#include <linux/compiler.h> #include <asm/blackfin.h> -#define __iomem - static inline void sync(void) { SSYNC(); diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile new file mode 100644 index 0000000000..aa3d2fae63 --- /dev/null +++ b/arch/m68k/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/m68k/cpu/$(CPU)/start.o + +libs-y += arch/m68k/cpu/$(CPU)/ +libs-y += arch/m68k/lib/ diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile new file mode 100644 index 0000000000..ae4adc29c4 --- /dev/null +++ b/arch/microblaze/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/microblaze/cpu/start.o + +libs-y += arch/microblaze/cpu/ +libs-y += arch/microblaze/lib/ diff --git a/arch/mips/Makefile b/arch/mips/Makefile new file mode 100644 index 0000000000..1907b57229 --- /dev/null +++ b/arch/mips/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/mips/cpu/$(CPU)/start.o + +libs-y += arch/mips/cpu/$(CPU)/ +libs-y += arch/mips/lib/ diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h index 1d5112ea69..c25a8462c7 100644 --- a/arch/mips/include/asm/unaligned.h +++ b/arch/mips/include/asm/unaligned.h @@ -8,7 +8,7 @@ #ifndef _ASM_MIPS_UNALIGNED_H #define _ASM_MIPS_UNALIGNED_H -#include <compiler.h> +#include <linux/compiler.h> #if defined(__MIPSEB__) #define get_unaligned __get_unaligned_be #define put_unaligned __put_unaligned_be diff --git a/arch/nds32/Makefile b/arch/nds32/Makefile new file mode 100644 index 0000000000..e1eccba173 --- /dev/null +++ b/arch/nds32/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/nds32/cpu/$(CPU)/start.o + +libs-y += arch/nds32/cpu/$(CPU)/ +libs-y += arch/nds32/lib/ diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile new file mode 100644 index 0000000000..18685a9250 --- /dev/null +++ b/arch/nios2/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/nios2/cpu/start.o + +libs-y += arch/nios2/cpu/ +libs-y += arch/nios2/lib/ diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile new file mode 100644 index 0000000000..c4da3ce9d8 --- /dev/null +++ b/arch/openrisc/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/openrisc/cpu/start.o + +libs-y += arch/openrisc/cpu/ +libs-y += arch/openrisc/lib/ diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile new file mode 100644 index 0000000000..8aa1d603fa --- /dev/null +++ b/arch/powerpc/Makefile @@ -0,0 +1,11 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/powerpc/cpu/$(CPU)/start.o +head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o +head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o + +libs-y += arch/powerpc/cpu/$(CPU)/ +libs-y += arch/powerpc/cpu/ +libs-y += arch/powerpc/lib/ diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index e447748e12..99420abc89 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -13,9 +13,6 @@ config TARGET_COGENT_MPC8XX config TARGET_ESTEEM192E bool "Support ESTEEM192E" -config TARGET_HERMES - bool "Support hermes" - config TARGET_IP860 bool "Support IP860" @@ -112,7 +109,6 @@ source "board/LEOX/elpt860/Kconfig" source "board/RRvision/Kconfig" source "board/cogent/Kconfig" source "board/esteem192e/Kconfig" -source "board/hermes/Kconfig" source "board/ip860/Kconfig" source "board/ivm/Kconfig" source "board/kup/kup4k/Kconfig" diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index 60c401e311..6a1cd4675a 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -125,8 +125,7 @@ void cpu_init_f (volatile immap_t * immr) * I owe him a free beer. - wd] */ -#if defined(CONFIG_HERMES) || \ - defined(CONFIG_IP860) || \ +#if defined(CONFIG_IP860) || \ defined(CONFIG_IVML24) || \ defined(CONFIG_IVMS8) || \ defined(CONFIG_LWMON) || \ diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 6eaab88243..e6d5355f26 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -820,13 +820,6 @@ void board_init_r(gd_t *id, ulong dest_addr) mac_read_from_eeprom(); #endif -#ifdef CONFIG_HERMES - if ((gd->board_type >> 16) == 2) - bd->bi_ethspeed = gd->board_type & 0xFFFF; - else - bd->bi_ethspeed = 0xFFFF; -#endif - #ifdef CONFIG_CMD_NET /* kept around for legacy kernels only ... ignore the next section */ eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr); @@ -876,11 +869,6 @@ void board_init_r(gd_t *id, ulong dest_addr) misc_init_r(); #endif -#ifdef CONFIG_HERMES - if (bd->bi_ethspeed != 0xFFFF) - hermes_start_lxt980((int) bd->bi_ethspeed); -#endif - #if defined(CONFIG_CMD_KGDB) WATCHDOG_RESET(); puts("KGDB: "); diff --git a/arch/sandbox/Makefile b/arch/sandbox/Makefile new file mode 100644 index 0000000000..23fdcdb53c --- /dev/null +++ b/arch/sandbox/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/sandbox/cpu/start.o + +libs-y += arch/sandbox/cpu/ +libs-y += arch/sandbox/lib/ diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index 31c93443db..4d5f805753 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -367,6 +367,7 @@ int os_dirent_ls(const char *dirname, struct os_dirent_node **headp) done: closedir(dir); + free(fname); return ret; } diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c index 0df77704c6..42353d80a8 100644 --- a/arch/sandbox/cpu/start.c +++ b/arch/sandbox/cpu/start.c @@ -130,7 +130,8 @@ static int sandbox_cmdline_cb_memory(struct sandbox_state *state, state->write_ram_buf = true; state->ram_buf_fname = arg; - if (os_read_ram_buf(arg)) { + err = os_read_ram_buf(arg); + if (err) { printf("Failed to read RAM buffer\n"); return err; } diff --git a/arch/sh/Makefile b/arch/sh/Makefile new file mode 100644 index 0000000000..ca55fac920 --- /dev/null +++ b/arch/sh/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/sh/cpu/$(CPU)/start.o + +libs-y += arch/sh/cpu/$(CPU)/ +libs-y += arch/sh/lib/ diff --git a/arch/sh/include/asm/unaligned.h b/arch/sh/include/asm/unaligned.h index 2e0d164050..06096eeac5 100644 --- a/arch/sh/include/asm/unaligned.h +++ b/arch/sh/include/asm/unaligned.h @@ -8,7 +8,7 @@ #include <asm/unaligned-sh4a.h> #else /* Otherwise, SH can't handle unaligned accesses. */ -#include <compiler.h> +#include <linux/compiler.h> #if defined(__BIG_ENDIAN__) #define get_unaligned __get_unaligned_be #define put_unaligned __put_unaligned_be diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile new file mode 100644 index 0000000000..2d4c9715a6 --- /dev/null +++ b/arch/sparc/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/sparc/cpu/$(CPU)/start.o + +libs-y += arch/sparc/cpu/$(CPU)/ +libs-y += arch/sparc/lib/ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6e29868f5f..4f5ce38d6f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -83,6 +83,155 @@ config X86_RAMTEST to work correctly. It is not exhaustive but can save time by detecting obvious failures. +config MARK_GRAPHICS_MEM_WRCOMB + bool "Mark graphics memory as write-combining." + default n + help + The graphics performance may increase if the graphics + memory is set as write-combining cache type. This option + enables marking the graphics memory as write-combining. + +menu "Display" + +config FRAMEBUFFER_SET_VESA_MODE + prompt "Set framebuffer graphics resolution" + bool + help + Set VESA/native framebuffer mode (needed for bootsplash and graphical framebuffer console) + +choice + prompt "framebuffer graphics resolution" + default FRAMEBUFFER_VESA_MODE_117 + depends on FRAMEBUFFER_SET_VESA_MODE + help + This option sets the resolution used for the coreboot framebuffer (and + bootsplash screen). + +config FRAMEBUFFER_VESA_MODE_100 + bool "640x400 256-color" + +config FRAMEBUFFER_VESA_MODE_101 + bool "640x480 256-color" + +config FRAMEBUFFER_VESA_MODE_102 + bool "800x600 16-color" + +config FRAMEBUFFER_VESA_MODE_103 + bool "800x600 256-color" + +config FRAMEBUFFER_VESA_MODE_104 + bool "1024x768 16-color" + +config FRAMEBUFFER_VESA_MODE_105 + bool "1024x7686 256-color" + +config FRAMEBUFFER_VESA_MODE_106 + bool "1280x1024 16-color" + +config FRAMEBUFFER_VESA_MODE_107 + bool "1280x1024 256-color" + +config FRAMEBUFFER_VESA_MODE_108 + bool "80x60 text" + +config FRAMEBUFFER_VESA_MODE_109 + bool "132x25 text" + +config FRAMEBUFFER_VESA_MODE_10A + bool "132x43 text" + +config FRAMEBUFFER_VESA_MODE_10B + bool "132x50 text" + +config FRAMEBUFFER_VESA_MODE_10C + bool "132x60 text" + +config FRAMEBUFFER_VESA_MODE_10D + bool "320x200 32k-color (1:5:5:5)" + +config FRAMEBUFFER_VESA_MODE_10E + bool "320x200 64k-color (5:6:5)" + +config FRAMEBUFFER_VESA_MODE_10F + bool "320x200 16.8M-color (8:8:8)" + +config FRAMEBUFFER_VESA_MODE_110 + bool "640x480 32k-color (1:5:5:5)" + +config FRAMEBUFFER_VESA_MODE_111 + bool "640x480 64k-color (5:6:5)" + +config FRAMEBUFFER_VESA_MODE_112 + bool "640x480 16.8M-color (8:8:8)" + +config FRAMEBUFFER_VESA_MODE_113 + bool "800x600 32k-color (1:5:5:5)" + +config FRAMEBUFFER_VESA_MODE_114 + bool "800x600 64k-color (5:6:5)" + +config FRAMEBUFFER_VESA_MODE_115 + bool "800x600 16.8M-color (8:8:8)" + +config FRAMEBUFFER_VESA_MODE_116 + bool "1024x768 32k-color (1:5:5:5)" + +config FRAMEBUFFER_VESA_MODE_117 + bool "1024x768 64k-color (5:6:5)" + +config FRAMEBUFFER_VESA_MODE_118 + bool "1024x768 16.8M-color (8:8:8)" + +config FRAMEBUFFER_VESA_MODE_119 + bool "1280x1024 32k-color (1:5:5:5)" + +config FRAMEBUFFER_VESA_MODE_11A + bool "1280x1024 64k-color (5:6:5)" + +config FRAMEBUFFER_VESA_MODE_11B + bool "1280x1024 16.8M-color (8:8:8)" + +config FRAMEBUFFER_VESA_MODE_USER + bool "Manually select VESA mode" + +endchoice + +# Map the config names to an integer (KB). +config FRAMEBUFFER_VESA_MODE + prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER + hex + default 0x100 if FRAMEBUFFER_VESA_MODE_100 + default 0x101 if FRAMEBUFFER_VESA_MODE_101 + default 0x102 if FRAMEBUFFER_VESA_MODE_102 + default 0x103 if FRAMEBUFFER_VESA_MODE_103 + default 0x104 if FRAMEBUFFER_VESA_MODE_104 + default 0x105 if FRAMEBUFFER_VESA_MODE_105 + default 0x106 if FRAMEBUFFER_VESA_MODE_106 + default 0x107 if FRAMEBUFFER_VESA_MODE_107 + default 0x108 if FRAMEBUFFER_VESA_MODE_108 + default 0x109 if FRAMEBUFFER_VESA_MODE_109 + default 0x10A if FRAMEBUFFER_VESA_MODE_10A + default 0x10B if FRAMEBUFFER_VESA_MODE_10B + default 0x10C if FRAMEBUFFER_VESA_MODE_10C + default 0x10D if FRAMEBUFFER_VESA_MODE_10D + default 0x10E if FRAMEBUFFER_VESA_MODE_10E + default 0x10F if FRAMEBUFFER_VESA_MODE_10F + default 0x110 if FRAMEBUFFER_VESA_MODE_110 + default 0x111 if FRAMEBUFFER_VESA_MODE_111 + default 0x112 if FRAMEBUFFER_VESA_MODE_112 + default 0x113 if FRAMEBUFFER_VESA_MODE_113 + default 0x114 if FRAMEBUFFER_VESA_MODE_114 + default 0x115 if FRAMEBUFFER_VESA_MODE_115 + default 0x116 if FRAMEBUFFER_VESA_MODE_116 + default 0x117 if FRAMEBUFFER_VESA_MODE_117 + default 0x118 if FRAMEBUFFER_VESA_MODE_118 + default 0x119 if FRAMEBUFFER_VESA_MODE_119 + default 0x11A if FRAMEBUFFER_VESA_MODE_11A + default 0x11B if FRAMEBUFFER_VESA_MODE_11B + default 0x117 if FRAMEBUFFER_VESA_MODE_USER + +endmenu + source "arch/x86/cpu/ivybridge/Kconfig" source "board/coreboot/coreboot/Kconfig" diff --git a/arch/x86/Makefile b/arch/x86/Makefile new file mode 100644 index 0000000000..36a601822a --- /dev/null +++ b/arch/x86/Makefile @@ -0,0 +1,12 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +head-y := arch/x86/cpu/start.o +ifeq ($(CONFIG_SPL_BUILD),y) +head-y += arch/x86/cpu/start16.o +head-y += arch/x86/cpu/resetvec.o +endif + +libs-y += arch/x86/cpu/ +libs-y += arch/x86/lib/ diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile index 2b9e9b9cf0..7f09db5ed3 100644 --- a/arch/x86/cpu/Makefile +++ b/arch/x86/cpu/Makefile @@ -13,4 +13,8 @@ obj-$(CONFIG_X86_RESET_VECTOR) += resetvec.o start16.o obj-y += interrupts.o cpu.o call64.o obj-$(CONFIG_SYS_COREBOOT) += coreboot/ +obj-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += ivybridge/ +obj-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += ivybridge/ +obj-y += lapic.o obj-$(CONFIG_PCI) += pci.o +obj-y += turbo.o diff --git a/arch/x86/cpu/config.mk b/arch/x86/cpu/config.mk index f7b01d36e0..84aeaf3edc 100644 --- a/arch/x86/cpu/config.mk +++ b/arch/x86/cpu/config.mk @@ -12,5 +12,6 @@ PLATFORM_CPPFLAGS += -D__I386__ -Werror # DO NOT MODIFY THE FOLLOWING UNLESS YOU REALLY KNOW WHAT YOU ARE DOING! LDPPFLAGS += -DRESET_SEG_START=0xffff0000 LDPPFLAGS += -DRESET_SEG_SIZE=0x10000 -LDPPFLAGS += -DRESET_VEC_LOC=0xfff0 -LDPPFLAGS += -DSTART_16=0xf800 +LDPPFLAGS += -DRESET_VEC_LOC=0xfffffff0 +LDPPFLAGS += -DSTART_16=$(CONFIG_SYS_X86_START16) +LDPPFLAGS += -DRESET_BASE="CONFIG_SYS_TEXT_BASE + (CONFIG_SYS_MONITOR_LEN - RESET_SEG_SIZE)" diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c index 2df72884f9..cfacc05875 100644 --- a/arch/x86/cpu/coreboot/coreboot.c +++ b/arch/x86/cpu/coreboot/coreboot.c @@ -39,17 +39,6 @@ int board_early_init_f(void) return 0; } -int board_early_init_r(void) -{ - /* CPU Speed to 100MHz */ - gd->cpu_clk = 100000000; - - /* Crystal is 33.000MHz */ - gd->bus_clk = 33000000; - - return 0; -} - int print_cpuinfo(void) { return default_print_cpuinfo(); diff --git a/arch/x86/cpu/coreboot/ipchecksum.c b/arch/x86/cpu/coreboot/ipchecksum.c index 5f6c00945b..3340872a87 100644 --- a/arch/x86/cpu/coreboot/ipchecksum.c +++ b/arch/x86/cpu/coreboot/ipchecksum.c @@ -29,7 +29,8 @@ * SUCH DAMAGE. */ -#include <compiler.h> +#include <linux/types.h> +#include <linux/compiler.h> #include <asm/arch/ipchecksum.h> unsigned short ipchksum(const void *vptr, unsigned long nbytes) diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index b391b7ade4..30e5069698 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -124,7 +124,7 @@ static void load_gdt(const u64 *boot_gdt, u16 num_entries) { struct gdt_ptr gdt; - gdt.len = (num_entries * 8) - 1; + gdt.len = (num_entries * X86_GDT_ENTRY_SIZE) - 1; gdt.ptr = (u32)boot_gdt; asm volatile("lgdtl %0\n" : : "m" (gdt)); @@ -144,10 +144,13 @@ void setup_gdt(gd_t *id, u64 *gdt_addr) (ulong)&id->arch.gd_addr, 0xfffff); /* 16-bit CS: code, read/execute, 64 kB, base 0 */ - gdt_addr[X86_GDT_ENTRY_16BIT_CS] = GDT_ENTRY(0x109b, 0, 0x0ffff); + gdt_addr[X86_GDT_ENTRY_16BIT_CS] = GDT_ENTRY(0x009b, 0, 0x0ffff); /* 16-bit DS: data, read/write, 64 kB, base 0 */ - gdt_addr[X86_GDT_ENTRY_16BIT_DS] = GDT_ENTRY(0x1093, 0, 0x0ffff); + gdt_addr[X86_GDT_ENTRY_16BIT_DS] = GDT_ENTRY(0x0093, 0, 0x0ffff); + + gdt_addr[X86_GDT_ENTRY_16BIT_FLAT_CS] = GDT_ENTRY(0x809b, 0, 0xfffff); + gdt_addr[X86_GDT_ENTRY_16BIT_FLAT_DS] = GDT_ENTRY(0x8093, 0, 0xfffff); load_gdt(gdt_addr, X86_GDT_NUM_ENTRIES); load_ds(X86_GDT_ENTRY_32BIT_DS); @@ -320,14 +323,6 @@ int x86_cpu_init_f(void) return 0; } -int x86_cpu_init_r(void) -{ - /* Initialize core interrupt and exception functionality of CPU */ - cpu_init_interrupts(); - return 0; -} -int cpu_init_r(void) __attribute__((weak, alias("x86_cpu_init_r"))); - void x86_enable_caches(void) { unsigned long cr0; diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c index 51e2c5923a..a21d2a6c50 100644 --- a/arch/x86/cpu/interrupts.c +++ b/arch/x86/cpu/interrupts.c @@ -20,6 +20,7 @@ #include <linux/compiler.h> #include <asm/msr.h> #include <asm/u-boot-x86.h> +#include <asm/i8259.h> DECLARE_GLOBAL_DATA_PTR; @@ -128,9 +129,6 @@ int cpu_init_interrupts(void) int irq_entry_size = irq_1 - irq_0; void *irq_entry = (void *)irq_0; - /* Just in case... */ - disable_interrupts(); - /* Setup the IDT */ for (i = 0; i < 256; i++) { idt[i].access = 0x8e; @@ -146,9 +144,6 @@ int cpu_init_interrupts(void) load_idt(&idt_ptr); - /* It is now safe to enable interrupts */ - enable_interrupts(); - return 0; } @@ -172,6 +167,25 @@ int disable_interrupts(void) return flags & X86_EFLAGS_IF; } +int interrupt_init(void) +{ + /* Just in case... */ + disable_interrupts(); + +#ifdef CONFIG_SYS_PCAT_INTERRUPTS + /* Initialize the master/slave i8259 pic */ + i8259_init(); +#endif + + /* Initialize core interrupt and exception functionality of CPU */ + cpu_init_interrupts(); + + /* It is now safe to enable interrupts */ + enable_interrupts(); + + return 0; +} + /* IRQ Low-Level Service Routine */ void irq_llsr(struct irq_regs *regs) { @@ -603,31 +617,3 @@ asm(".globl irq_common_entry\n" \ DECLARE_INTERRUPT(253) \ DECLARE_INTERRUPT(254) \ DECLARE_INTERRUPT(255)); - -#if defined(CONFIG_INTEL_CORE_ARCH) -/* - * Get the number of CPU time counter ticks since it was read first time after - * restart. This yields a free running counter guaranteed to take almost 6 - * years to wrap around even at 100GHz clock rate. - */ -u64 get_ticks(void) -{ - u64 now_tick = rdtsc(); - - if (!gd->arch.tsc_base) - gd->arch.tsc_base = now_tick; - - return now_tick - gd->arch.tsc_base; -} - -#define PLATFORM_INFO_MSR 0xce - -unsigned long get_tbclk(void) -{ - u32 ratio; - u64 platform_info = native_read_msr(PLATFORM_INFO_MSR); - - ratio = (platform_info >> 8) & 0xff; - return 100 * 1000 * 1000 * ratio; /* 100MHz times Max Non Turbo ratio */ -} -#endif diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile index 721b37e628..0c7efaec7c 100644 --- a/arch/x86/cpu/ivybridge/Makefile +++ b/arch/x86/cpu/ivybridge/Makefile @@ -4,13 +4,21 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-y += bd82x6x.o obj-y += car.o obj-y += cpu.o obj-y += early_init.o obj-y += early_me.o +obj-y += gma.o obj-y += lpc.o obj-y += me_status.o +obj-y += model_206ax.o obj-y += microcode_intel.o +obj-y += northbridge.o +obj-y += pch.o obj-y += pci.o obj-y += report_platform.o +obj-y += sata.o obj-y += sdram.o +obj-y += usb_ehci.o +obj-y += usb_xhci.o diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c new file mode 100644 index 0000000000..65a17d3e7f --- /dev/null +++ b/arch/x86/cpu/ivybridge/bd82x6x.c @@ -0,0 +1,146 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <fdtdec.h> +#include <malloc.h> +#include <asm/lapic.h> +#include <asm/pci.h> +#include <asm/arch/bd82x6x.h> +#include <asm/arch/model_206ax.h> +#include <asm/arch/pch.h> +#include <asm/arch/sandybridge.h> + +void bd82x6x_pci_init(pci_dev_t dev) +{ + u16 reg16; + u8 reg8; + + debug("bd82x6x PCI init.\n"); + /* Enable Bus Master */ + reg16 = pci_read_config16(dev, PCI_COMMAND); + reg16 |= PCI_COMMAND_MASTER; + pci_write_config16(dev, PCI_COMMAND, reg16); + + /* This device has no interrupt */ + pci_write_config8(dev, INTR, 0xff); + + /* disable parity error response and SERR */ + reg16 = pci_read_config16(dev, BCTRL); + reg16 &= ~(1 << 0); + reg16 &= ~(1 << 1); + pci_write_config16(dev, BCTRL, reg16); + + /* Master Latency Count must be set to 0x04! */ + reg8 = pci_read_config8(dev, SMLT); + reg8 &= 0x07; + reg8 |= (0x04 << 3); + pci_write_config8(dev, SMLT, reg8); + + /* Will this improve throughput of bus masters? */ + pci_write_config8(dev, PCI_MIN_GNT, 0x06); + + /* Clear errors in status registers */ + reg16 = pci_read_config16(dev, PSTS); + /* reg16 |= 0xf900; */ + pci_write_config16(dev, PSTS, reg16); + + reg16 = pci_read_config16(dev, SECSTS); + /* reg16 |= 0xf900; */ + pci_write_config16(dev, SECSTS, reg16); +} + +#define PCI_BRIDGE_UPDATE_COMMAND +void bd82x6x_pci_dev_enable_resources(pci_dev_t dev) +{ + uint16_t command; + + command = pci_read_config16(dev, PCI_COMMAND); + command |= PCI_COMMAND_IO; +#ifdef PCI_BRIDGE_UPDATE_COMMAND + /* + * If we write to PCI_COMMAND, on some systems this will cause the + * ROM and APICs to become invisible. + */ + debug("%x cmd <- %02x\n", dev, command); + pci_write_config16(dev, PCI_COMMAND, command); +#else + printf("%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command); +#endif +} + +void bd82x6x_pci_bus_enable_resources(pci_dev_t dev) +{ + uint16_t ctrl; + + ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL); + ctrl |= PCI_COMMAND_IO; + ctrl |= PCI_BRIDGE_CTL_VGA; + debug("%x bridge ctrl <- %04x\n", dev, ctrl); + pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl); + + bd82x6x_pci_dev_enable_resources(dev); +} + +int bd82x6x_init_pci_devices(void) +{ + const void *blob = gd->fdt_blob; + struct pci_controller *hose; + struct x86_cpu_priv *cpu; + int sata_node, gma_node; + int ret; + + hose = pci_bus_to_hose(0); + lpc_enable(PCH_LPC_DEV); + lpc_init(hose, PCH_LPC_DEV); + sata_node = fdtdec_next_compatible(blob, 0, + COMPAT_INTEL_PANTHERPOINT_AHCI); + if (sata_node < 0) { + debug("%s: Cannot find SATA node\n", __func__); + return -EINVAL; + } + bd82x6x_sata_init(PCH_SATA_DEV, blob, sata_node); + bd82x6x_usb_ehci_init(PCH_EHCI1_DEV); + bd82x6x_usb_ehci_init(PCH_EHCI2_DEV); + + cpu = calloc(1, sizeof(*cpu)); + if (!cpu) + return -ENOMEM; + model_206ax_init(cpu); + + gma_node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_GMA); + if (gma_node < 0) { + debug("%s: Cannot find GMA node\n", __func__); + return -EINVAL; + } + ret = gma_func0_init(PCH_VIDEO_DEV, pci_bus_to_hose(0), blob, + gma_node); + if (ret) + return ret; + + return 0; +} + +int bd82x6x_init(void) +{ + const void *blob = gd->fdt_blob; + int sata_node; + + sata_node = fdtdec_next_compatible(blob, 0, + COMPAT_INTEL_PANTHERPOINT_AHCI); + if (sata_node < 0) { + debug("%s: Cannot find SATA node\n", __func__); + return -EINVAL; + } + + bd82x6x_pci_init(PCH_DEV); + bd82x6x_sata_enable(PCH_SATA_DEV, blob, sata_node); + northbridge_enable(PCH_DEV); + northbridge_init(PCH_DEV); + + return 0; +} diff --git a/arch/x86/cpu/ivybridge/gma.c b/arch/x86/cpu/ivybridge/gma.c new file mode 100644 index 0000000000..3d7f740273 --- /dev/null +++ b/arch/x86/cpu/ivybridge/gma.c @@ -0,0 +1,756 @@ +/* + * From Coreboot file of the same name + * + * Copyright (C) 2011 Chromium OS Authors + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <bios_emul.h> +#include <errno.h> +#include <fdtdec.h> +#include <pci_rom.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <asm/arch/pch.h> +#include <asm/arch/sandybridge.h> + +struct gt_powermeter { + u16 reg; + u32 value; +}; + +static const struct gt_powermeter snb_pm_gt1[] = { + { 0xa200, 0xcc000000 }, + { 0xa204, 0x07000040 }, + { 0xa208, 0x0000fe00 }, + { 0xa20c, 0x00000000 }, + { 0xa210, 0x17000000 }, + { 0xa214, 0x00000021 }, + { 0xa218, 0x0817fe19 }, + { 0xa21c, 0x00000000 }, + { 0xa220, 0x00000000 }, + { 0xa224, 0xcc000000 }, + { 0xa228, 0x07000040 }, + { 0xa22c, 0x0000fe00 }, + { 0xa230, 0x00000000 }, + { 0xa234, 0x17000000 }, + { 0xa238, 0x00000021 }, + { 0xa23c, 0x0817fe19 }, + { 0xa240, 0x00000000 }, + { 0xa244, 0x00000000 }, + { 0xa248, 0x8000421e }, + { 0 } +}; + +static const struct gt_powermeter snb_pm_gt2[] = { + { 0xa200, 0x330000a6 }, + { 0xa204, 0x402d0031 }, + { 0xa208, 0x00165f83 }, + { 0xa20c, 0xf1000000 }, + { 0xa210, 0x00000000 }, + { 0xa214, 0x00160016 }, + { 0xa218, 0x002a002b }, + { 0xa21c, 0x00000000 }, + { 0xa220, 0x00000000 }, + { 0xa224, 0x330000a6 }, + { 0xa228, 0x402d0031 }, + { 0xa22c, 0x00165f83 }, + { 0xa230, 0xf1000000 }, + { 0xa234, 0x00000000 }, + { 0xa238, 0x00160016 }, + { 0xa23c, 0x002a002b }, + { 0xa240, 0x00000000 }, + { 0xa244, 0x00000000 }, + { 0xa248, 0x8000421e }, + { 0 } +}; + +static const struct gt_powermeter ivb_pm_gt1[] = { + { 0xa800, 0x00000000 }, + { 0xa804, 0x00021c00 }, + { 0xa808, 0x00000403 }, + { 0xa80c, 0x02001700 }, + { 0xa810, 0x05000200 }, + { 0xa814, 0x00000000 }, + { 0xa818, 0x00690500 }, + { 0xa81c, 0x0000007f }, + { 0xa820, 0x01002501 }, + { 0xa824, 0x00000300 }, + { 0xa828, 0x01000331 }, + { 0xa82c, 0x0000000c }, + { 0xa830, 0x00010016 }, + { 0xa834, 0x01100101 }, + { 0xa838, 0x00010103 }, + { 0xa83c, 0x00041300 }, + { 0xa840, 0x00000b30 }, + { 0xa844, 0x00000000 }, + { 0xa848, 0x7f000000 }, + { 0xa84c, 0x05000008 }, + { 0xa850, 0x00000001 }, + { 0xa854, 0x00000004 }, + { 0xa858, 0x00000007 }, + { 0xa85c, 0x00000000 }, + { 0xa860, 0x00010000 }, + { 0xa248, 0x0000221e }, + { 0xa900, 0x00000000 }, + { 0xa904, 0x00001c00 }, + { 0xa908, 0x00000000 }, + { 0xa90c, 0x06000000 }, + { 0xa910, 0x09000200 }, + { 0xa914, 0x00000000 }, + { 0xa918, 0x00590000 }, + { 0xa91c, 0x00000000 }, + { 0xa920, 0x04002501 }, + { 0xa924, 0x00000100 }, + { 0xa928, 0x03000410 }, + { 0xa92c, 0x00000000 }, + { 0xa930, 0x00020000 }, + { 0xa934, 0x02070106 }, + { 0xa938, 0x00010100 }, + { 0xa93c, 0x00401c00 }, + { 0xa940, 0x00000000 }, + { 0xa944, 0x00000000 }, + { 0xa948, 0x10000e00 }, + { 0xa94c, 0x02000004 }, + { 0xa950, 0x00000001 }, + { 0xa954, 0x00000004 }, + { 0xa960, 0x00060000 }, + { 0xaa3c, 0x00001c00 }, + { 0xaa54, 0x00000004 }, + { 0xaa60, 0x00060000 }, + { 0 } +}; + +static const struct gt_powermeter ivb_pm_gt2[] = { + { 0xa800, 0x10000000 }, + { 0xa804, 0x00033800 }, + { 0xa808, 0x00000902 }, + { 0xa80c, 0x0c002f00 }, + { 0xa810, 0x12000400 }, + { 0xa814, 0x00000000 }, + { 0xa818, 0x00d20800 }, + { 0xa81c, 0x00000002 }, + { 0xa820, 0x03004b02 }, + { 0xa824, 0x00000600 }, + { 0xa828, 0x07000773 }, + { 0xa82c, 0x00000000 }, + { 0xa830, 0x00010032 }, + { 0xa834, 0x1520040d }, + { 0xa838, 0x00020105 }, + { 0xa83c, 0x00083700 }, + { 0xa840, 0x0000151d }, + { 0xa844, 0x00000000 }, + { 0xa848, 0x20001b00 }, + { 0xa84c, 0x0a000010 }, + { 0xa850, 0x00000000 }, + { 0xa854, 0x00000008 }, + { 0xa858, 0x00000008 }, + { 0xa85c, 0x00000000 }, + { 0xa860, 0x00020000 }, + { 0xa248, 0x0000221e }, + { 0xa900, 0x00000000 }, + { 0xa904, 0x00003500 }, + { 0xa908, 0x00000000 }, + { 0xa90c, 0x0c000000 }, + { 0xa910, 0x12000500 }, + { 0xa914, 0x00000000 }, + { 0xa918, 0x00b20000 }, + { 0xa91c, 0x00000000 }, + { 0xa920, 0x08004b02 }, + { 0xa924, 0x00000200 }, + { 0xa928, 0x07000820 }, + { 0xa92c, 0x00000000 }, + { 0xa930, 0x00030000 }, + { 0xa934, 0x050f020d }, + { 0xa938, 0x00020300 }, + { 0xa93c, 0x00903900 }, + { 0xa940, 0x00000000 }, + { 0xa944, 0x00000000 }, + { 0xa948, 0x20001b00 }, + { 0xa94c, 0x0a000010 }, + { 0xa950, 0x00000000 }, + { 0xa954, 0x00000008 }, + { 0xa960, 0x00110000 }, + { 0xaa3c, 0x00003900 }, + { 0xaa54, 0x00000008 }, + { 0xaa60, 0x00110000 }, + { 0 } +}; + +static const struct gt_powermeter ivb_pm_gt2_17w[] = { + { 0xa800, 0x20000000 }, + { 0xa804, 0x000e3800 }, + { 0xa808, 0x00000806 }, + { 0xa80c, 0x0c002f00 }, + { 0xa810, 0x0c000800 }, + { 0xa814, 0x00000000 }, + { 0xa818, 0x00d20d00 }, + { 0xa81c, 0x000000ff }, + { 0xa820, 0x03004b02 }, + { 0xa824, 0x00000600 }, + { 0xa828, 0x07000773 }, + { 0xa82c, 0x00000000 }, + { 0xa830, 0x00020032 }, + { 0xa834, 0x1520040d }, + { 0xa838, 0x00020105 }, + { 0xa83c, 0x00083700 }, + { 0xa840, 0x000016ff }, + { 0xa844, 0x00000000 }, + { 0xa848, 0xff000000 }, + { 0xa84c, 0x0a000010 }, + { 0xa850, 0x00000002 }, + { 0xa854, 0x00000008 }, + { 0xa858, 0x0000000f }, + { 0xa85c, 0x00000000 }, + { 0xa860, 0x00020000 }, + { 0xa248, 0x0000221e }, + { 0xa900, 0x00000000 }, + { 0xa904, 0x00003800 }, + { 0xa908, 0x00000000 }, + { 0xa90c, 0x0c000000 }, + { 0xa910, 0x12000800 }, + { 0xa914, 0x00000000 }, + { 0xa918, 0x00b20000 }, + { 0xa91c, 0x00000000 }, + { 0xa920, 0x08004b02 }, + { 0xa924, 0x00000300 }, + { 0xa928, 0x01000820 }, + { 0xa92c, 0x00000000 }, + { 0xa930, 0x00030000 }, + { 0xa934, 0x15150406 }, + { 0xa938, 0x00020300 }, + { 0xa93c, 0x00903900 }, + { 0xa940, 0x00000000 }, + { 0xa944, 0x00000000 }, + { 0xa948, 0x20001b00 }, + { 0xa94c, 0x0a000010 }, + { 0xa950, 0x00000000 }, + { 0xa954, 0x00000008 }, + { 0xa960, 0x00110000 }, + { 0xaa3c, 0x00003900 }, + { 0xaa54, 0x00000008 }, + { 0xaa60, 0x00110000 }, + { 0 } +}; + +static const struct gt_powermeter ivb_pm_gt2_35w[] = { + { 0xa800, 0x00000000 }, + { 0xa804, 0x00030400 }, + { 0xa808, 0x00000806 }, + { 0xa80c, 0x0c002f00 }, + { 0xa810, 0x0c000300 }, + { 0xa814, 0x00000000 }, + { 0xa818, 0x00d20d00 }, + { 0xa81c, 0x000000ff }, + { 0xa820, 0x03004b02 }, + { 0xa824, 0x00000600 }, + { 0xa828, 0x07000773 }, + { 0xa82c, 0x00000000 }, + { 0xa830, 0x00020032 }, + { 0xa834, 0x1520040d }, + { 0xa838, 0x00020105 }, + { 0xa83c, 0x00083700 }, + { 0xa840, 0x000016ff }, + { 0xa844, 0x00000000 }, + { 0xa848, 0xff000000 }, + { 0xa84c, 0x0a000010 }, + { 0xa850, 0x00000001 }, + { 0xa854, 0x00000008 }, + { 0xa858, 0x00000008 }, + { 0xa85c, 0x00000000 }, + { 0xa860, 0x00020000 }, + { 0xa248, 0x0000221e }, + { 0xa900, 0x00000000 }, + { 0xa904, 0x00003800 }, + { 0xa908, 0x00000000 }, + { 0xa90c, 0x0c000000 }, + { 0xa910, 0x12000800 }, + { 0xa914, 0x00000000 }, + { 0xa918, 0x00b20000 }, + { 0xa91c, 0x00000000 }, + { 0xa920, 0x08004b02 }, + { 0xa924, 0x00000300 }, + { 0xa928, 0x01000820 }, + { 0xa92c, 0x00000000 }, + { 0xa930, 0x00030000 }, + { 0xa934, 0x15150406 }, + { 0xa938, 0x00020300 }, + { 0xa93c, 0x00903900 }, + { 0xa940, 0x00000000 }, + { 0xa944, 0x00000000 }, + { 0xa948, 0x20001b00 }, + { 0xa94c, 0x0a000010 }, + { 0xa950, 0x00000000 }, + { 0xa954, 0x00000008 }, + { 0xa960, 0x00110000 }, + { 0xaa3c, 0x00003900 }, + { 0xaa54, 0x00000008 }, + { 0xaa60, 0x00110000 }, + { 0 } +}; + +/* + * Some vga option roms are used for several chipsets but they only have one + * PCI ID in their header. If we encounter such an option rom, we need to do + * the mapping ourselves. + */ + +u32 map_oprom_vendev(u32 vendev) +{ + u32 new_vendev = vendev; + + switch (vendev) { + case 0x80860102: /* GT1 Desktop */ + case 0x8086010a: /* GT1 Server */ + case 0x80860112: /* GT2 Desktop */ + case 0x80860116: /* GT2 Mobile */ + case 0x80860122: /* GT2 Desktop >=1.3GHz */ + case 0x80860126: /* GT2 Mobile >=1.3GHz */ + case 0x80860156: /* IVB */ + case 0x80860166: /* IVB */ + /* Set to GT1 Mobile */ + new_vendev = 0x80860106; + break; + } + + return new_vendev; +} + +static inline u32 gtt_read(void *bar, u32 reg) +{ + return readl(bar + reg); +} + +static inline void gtt_write(void *bar, u32 reg, u32 data) +{ + writel(data, bar + reg); +} + +static void gtt_write_powermeter(void *bar, const struct gt_powermeter *pm) +{ + for (; pm && pm->reg; pm++) + gtt_write(bar, pm->reg, pm->value); +} + +#define GTT_RETRY 1000 +static int gtt_poll(void *bar, u32 reg, u32 mask, u32 value) +{ + unsigned try = GTT_RETRY; + u32 data; + + while (try--) { + data = gtt_read(bar, reg); + if ((data & mask) == value) + return 1; + udelay(10); + } + + printf("GT init timeout\n"); + return 0; +} + +static int gma_pm_init_pre_vbios(void *gtt_bar) +{ + u32 reg32; + + debug("GT Power Management Init, silicon = %#x\n", + bridge_silicon_revision()); + + if (bridge_silicon_revision() < IVB_STEP_C0) { + /* 1: Enable force wake */ + gtt_write(gtt_bar, 0xa18c, 0x00000001); + gtt_poll(gtt_bar, 0x130090, (1 << 0), (1 << 0)); + } else { + gtt_write(gtt_bar, 0xa180, 1 << 5); + gtt_write(gtt_bar, 0xa188, 0xffff0001); + gtt_poll(gtt_bar, 0x130040, (1 << 0), (1 << 0)); + } + + if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) { + /* 1d: Set GTT+0x42004 [15:14]=11 (SnB C1+) */ + reg32 = gtt_read(gtt_bar, 0x42004); + reg32 |= (1 << 14) | (1 << 15); + gtt_write(gtt_bar, 0x42004, reg32); + } + + if (bridge_silicon_revision() >= IVB_STEP_A0) { + /* Display Reset Acknowledge Settings */ + reg32 = gtt_read(gtt_bar, 0x45010); + reg32 |= (1 << 1) | (1 << 0); + gtt_write(gtt_bar, 0x45010, reg32); + } + + /* 2: Get GT SKU from GTT+0x911c[13] */ + reg32 = gtt_read(gtt_bar, 0x911c); + if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) { + if (reg32 & (1 << 13)) { + debug("SNB GT1 Power Meter Weights\n"); + gtt_write_powermeter(gtt_bar, snb_pm_gt1); + } else { + debug("SNB GT2 Power Meter Weights\n"); + gtt_write_powermeter(gtt_bar, snb_pm_gt2); + } + } else { + u32 unit = readl(MCHBAR_REG(0x5938)) & 0xf; + + if (reg32 & (1 << 13)) { + /* GT1 SKU */ + debug("IVB GT1 Power Meter Weights\n"); + gtt_write_powermeter(gtt_bar, ivb_pm_gt1); + } else { + /* GT2 SKU */ + u32 tdp = readl(MCHBAR_REG(0x5930)) & 0x7fff; + tdp /= (1 << unit); + + if (tdp <= 17) { + /* <=17W ULV */ + debug("IVB GT2 17W Power Meter Weights\n"); + gtt_write_powermeter(gtt_bar, ivb_pm_gt2_17w); + } else if ((tdp >= 25) && (tdp <= 35)) { + /* 25W-35W */ + debug("IVB GT2 25W-35W Power Meter Weights\n"); + gtt_write_powermeter(gtt_bar, ivb_pm_gt2_35w); + } else { + /* All others */ + debug("IVB GT2 35W Power Meter Weights\n"); + gtt_write_powermeter(gtt_bar, ivb_pm_gt2_35w); + } + } + } + + /* 3: Gear ratio map */ + gtt_write(gtt_bar, 0xa004, 0x00000010); + + /* 4: GFXPAUSE */ + gtt_write(gtt_bar, 0xa000, 0x00070020); + + /* 5: Dynamic EU trip control */ + gtt_write(gtt_bar, 0xa080, 0x00000004); + + /* 6: ECO bits */ + reg32 = gtt_read(gtt_bar, 0xa180); + reg32 |= (1 << 26) | (1 << 31); + /* (bit 20=1 for SNB step D1+ / IVB A0+) */ + if (bridge_silicon_revision() >= SNB_STEP_D1) + reg32 |= (1 << 20); + gtt_write(gtt_bar, 0xa180, reg32); + + /* 6a: for SnB step D2+ only */ + if (((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) && + (bridge_silicon_revision() >= SNB_STEP_D2)) { + reg32 = gtt_read(gtt_bar, 0x9400); + reg32 |= (1 << 7); + gtt_write(gtt_bar, 0x9400, reg32); + + reg32 = gtt_read(gtt_bar, 0x941c); + reg32 &= 0xf; + reg32 |= (1 << 1); + gtt_write(gtt_bar, 0x941c, reg32); + gtt_poll(gtt_bar, 0x941c, (1 << 1), (0 << 1)); + } + + if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) { + reg32 = gtt_read(gtt_bar, 0x907c); + reg32 |= (1 << 16); + gtt_write(gtt_bar, 0x907c, reg32); + + /* 6b: Clocking reset controls */ + gtt_write(gtt_bar, 0x9424, 0x00000001); + } else { + /* 6b: Clocking reset controls */ + gtt_write(gtt_bar, 0x9424, 0x00000000); + } + + /* 7 */ + if (gtt_poll(gtt_bar, 0x138124, (1 << 31), (0 << 31))) { + gtt_write(gtt_bar, 0x138128, 0x00000029); /* Mailbox Data */ + /* Mailbox Cmd for RC6 VID */ + gtt_write(gtt_bar, 0x138124, 0x80000004); + if (gtt_poll(gtt_bar, 0x138124, (1 << 31), (0 << 31))) + gtt_write(gtt_bar, 0x138124, 0x8000000a); + gtt_poll(gtt_bar, 0x138124, (1 << 31), (0 << 31)); + } + + /* 8 */ + gtt_write(gtt_bar, 0xa090, 0x00000000); /* RC Control */ + gtt_write(gtt_bar, 0xa098, 0x03e80000); /* RC1e Wake Rate Limit */ + gtt_write(gtt_bar, 0xa09c, 0x0028001e); /* RC6/6p Wake Rate Limit */ + gtt_write(gtt_bar, 0xa0a0, 0x0000001e); /* RC6pp Wake Rate Limit */ + gtt_write(gtt_bar, 0xa0a8, 0x0001e848); /* RC Evaluation Interval */ + gtt_write(gtt_bar, 0xa0ac, 0x00000019); /* RC Idle Hysteresis */ + + /* 9 */ + gtt_write(gtt_bar, 0x2054, 0x0000000a); /* Render Idle Max Count */ + gtt_write(gtt_bar, 0x12054, 0x0000000a); /* Video Idle Max Count */ + gtt_write(gtt_bar, 0x22054, 0x0000000a); /* Blitter Idle Max Count */ + + /* 10 */ + gtt_write(gtt_bar, 0xa0b0, 0x00000000); /* Unblock Ack to Busy */ + gtt_write(gtt_bar, 0xa0b4, 0x000003e8); /* RC1e Threshold */ + gtt_write(gtt_bar, 0xa0b8, 0x0000c350); /* RC6 Threshold */ + gtt_write(gtt_bar, 0xa0bc, 0x000186a0); /* RC6p Threshold */ + gtt_write(gtt_bar, 0xa0c0, 0x0000fa00); /* RC6pp Threshold */ + + /* 11 */ + gtt_write(gtt_bar, 0xa010, 0x000f4240); /* RP Down Timeout */ + gtt_write(gtt_bar, 0xa014, 0x12060000); /* RP Interrupt Limits */ + gtt_write(gtt_bar, 0xa02c, 0x00015f90); /* RP Up Threshold */ + gtt_write(gtt_bar, 0xa030, 0x000186a0); /* RP Down Threshold */ + gtt_write(gtt_bar, 0xa068, 0x000186a0); /* RP Up EI */ + gtt_write(gtt_bar, 0xa06c, 0x000493e0); /* RP Down EI */ + gtt_write(gtt_bar, 0xa070, 0x0000000a); /* RP Idle Hysteresis */ + + /* 11a: Enable Render Standby (RC6) */ + if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) { + /* + * IvyBridge should also support DeepRenderStandby. + * + * Unfortunately it does not work reliably on all SKUs so + * disable it here and it can be enabled by the kernel. + */ + gtt_write(gtt_bar, 0xa090, 0x88040000); /* HW RC Control */ + } else { + gtt_write(gtt_bar, 0xa090, 0x88040000); /* HW RC Control */ + } + + /* 12: Normal Frequency Request */ + /* RPNFREQ_VAL comes from MCHBAR 0x5998 23:16 (8 bits!? use 7) */ + reg32 = readl(MCHBAR_REG(0x5998)); + reg32 >>= 16; + reg32 &= 0xef; + reg32 <<= 25; + gtt_write(gtt_bar, 0xa008, reg32); + + /* 13: RP Control */ + gtt_write(gtt_bar, 0xa024, 0x00000592); + + /* 14: Enable PM Interrupts */ + gtt_write(gtt_bar, 0x4402c, 0x03000076); + + /* Clear 0x6c024 [8:6] */ + reg32 = gtt_read(gtt_bar, 0x6c024); + reg32 &= ~0x000001c0; + gtt_write(gtt_bar, 0x6c024, reg32); + + return 0; +} + +int gma_pm_init_post_vbios(void *gtt_bar, const void *blob, int node) +{ + u32 reg32, cycle_delay; + + debug("GT Power Management Init (post VBIOS)\n"); + + /* 15: Deassert Force Wake */ + if (bridge_silicon_revision() < IVB_STEP_C0) { + gtt_write(gtt_bar, 0xa18c, gtt_read(gtt_bar, 0xa18c) & ~1); + gtt_poll(gtt_bar, 0x130090, (1 << 0), (0 << 0)); + } else { + gtt_write(gtt_bar, 0xa188, 0x1fffe); + if (gtt_poll(gtt_bar, 0x130040, (1 << 0), (0 << 0))) { + gtt_write(gtt_bar, 0xa188, + gtt_read(gtt_bar, 0xa188) | 1); + } + } + + /* 16: SW RC Control */ + gtt_write(gtt_bar, 0xa094, 0x00060000); + + /* Setup Digital Port Hotplug */ + reg32 = gtt_read(gtt_bar, 0xc4030); + if (!reg32) { + u32 dp_hotplug[3]; + + if (fdtdec_get_int_array(blob, node, "intel,dp_hotplug", + dp_hotplug, ARRAY_SIZE(dp_hotplug))) + return -EINVAL; + + reg32 = (dp_hotplug[0] & 0x7) << 2; + reg32 |= (dp_hotplug[0] & 0x7) << 10; + reg32 |= (dp_hotplug[0] & 0x7) << 18; + gtt_write(gtt_bar, 0xc4030, reg32); + } + + /* Setup Panel Power On Delays */ + reg32 = gtt_read(gtt_bar, 0xc7208); + if (!reg32) { + reg32 = (unsigned)fdtdec_get_int(blob, node, + "panel-port-select", 0) << 30; + reg32 |= fdtdec_get_int(blob, node, "panel-power-up-delay", 0) + << 16; + reg32 |= fdtdec_get_int(blob, node, + "panel-power-backlight-on-delay", 0); + gtt_write(gtt_bar, 0xc7208, reg32); + } + + /* Setup Panel Power Off Delays */ + reg32 = gtt_read(gtt_bar, 0xc720c); + if (!reg32) { + reg32 = fdtdec_get_int(blob, node, "panel-power-down-delay", 0) + << 16; + reg32 |= fdtdec_get_int(blob, node, + "panel-power-backlight-off-delay", 0); + gtt_write(gtt_bar, 0xc720c, reg32); + } + + /* Setup Panel Power Cycle Delay */ + cycle_delay = fdtdec_get_int(blob, node, + "intel,panel-power-cycle-delay", 0); + if (cycle_delay) { + reg32 = gtt_read(gtt_bar, 0xc7210); + reg32 &= ~0xff; + reg32 |= cycle_delay; + gtt_write(gtt_bar, 0xc7210, reg32); + } + + /* Enable Backlight if needed */ + reg32 = fdtdec_get_int(blob, node, "intel,cpu-backlight", 0); + if (reg32) { + gtt_write(gtt_bar, 0x48250, (1 << 31)); + gtt_write(gtt_bar, 0x48254, reg32); + } + reg32 = fdtdec_get_int(blob, node, "intel,pch-backlight", 0); + if (reg32) { + gtt_write(gtt_bar, 0xc8250, (1 << 31)); + gtt_write(gtt_bar, 0xc8254, reg32); + } + + return 0; +} + +/* + * Some vga option roms are used for several chipsets but they only have one + * PCI ID in their header. If we encounter such an option rom, we need to do + * the mapping ourselves. + */ + +uint32_t board_map_oprom_vendev(uint32_t vendev) +{ + switch (vendev) { + case 0x80860102: /* GT1 Desktop */ + case 0x8086010a: /* GT1 Server */ + case 0x80860112: /* GT2 Desktop */ + case 0x80860116: /* GT2 Mobile */ + case 0x80860122: /* GT2 Desktop >=1.3GHz */ + case 0x80860126: /* GT2 Mobile >=1.3GHz */ + case 0x80860156: /* IVB */ + case 0x80860166: /* IVB */ + return 0x80860106; /* GT1 Mobile */ + } + + return vendev; +} + +static int int15_handler(void) +{ + int res = 0; + + debug("%s: INT15 function %04x!\n", __func__, M.x86.R_AX); + + switch (M.x86.R_AX) { + case 0x5f34: + /* + * Set Panel Fitting Hook: + * bit 2 = Graphics Stretching + * bit 1 = Text Stretching + * bit 0 = Centering (do not set with bit1 or bit2) + * 0 = video bios default + */ + M.x86.R_AX = 0x005f; + M.x86.R_CL = 0x00; /* Use video bios default */ + res = 1; + break; + case 0x5f35: + /* + * Boot Display Device Hook: + * bit 0 = CRT + * bit 1 = TV (eDP) + * bit 2 = EFP + * bit 3 = LFP + * bit 4 = CRT2 + * bit 5 = TV2 (eDP) + * bit 6 = EFP2 + * bit 7 = LFP2 + */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0x0000; /* Use video bios default */ + res = 1; + break; + case 0x5f51: + /* + * Hook to select active LFP configuration: + * 00h = No LVDS, VBIOS does not enable LVDS + * 01h = Int-LVDS, LFP driven by integrated LVDS decoder + * 02h = SVDO-LVDS, LFP driven by SVDO decoder + * 03h = eDP, LFP Driven by Int-DisplayPort encoder + */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0x0003; /* eDP */ + res = 1; + break; + case 0x5f70: + switch (M.x86.R_CH) { + case 0: + /* Get Mux */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0x0000; + res = 1; + break; + case 1: + /* Set Mux */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0x0000; + res = 1; + break; + case 2: + /* Get SG/Non-SG mode */ + M.x86.R_AX = 0x005f; + M.x86.R_CX = 0x0000; + res = 1; + break; + default: + /* Interrupt was not handled */ + debug("Unknown INT15 5f70 function: 0x%02x\n", + M.x86.R_CH); + break; + } + break; + case 0x5fac: + res = 1; + break; + default: + debug("Unknown INT15 function %04x!\n", M.x86.R_AX); + break; + } + return res; +} + +int gma_func0_init(pci_dev_t dev, struct pci_controller *hose, + const void *blob, int node) +{ + void *gtt_bar; + u32 reg32; + int ret; + + /* IGD needs to be Bus Master */ + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO; + pci_write_config32(dev, PCI_COMMAND, reg32); + + gtt_bar = (void *)pci_read_bar32(pci_bus_to_hose(0), dev, 0); + debug("GT bar %p\n", gtt_bar); + ret = gma_pm_init_pre_vbios(gtt_bar); + if (ret) + return ret; + + ret = pci_run_vga_bios(dev, int15_handler, false); + + /* Post VBIOS init */ + ret = gma_pm_init_post_vbios(gtt_bar, blob, node); + if (ret) + return ret; + + return 0; +} diff --git a/arch/x86/cpu/ivybridge/gma.h b/arch/x86/cpu/ivybridge/gma.h new file mode 100644 index 0000000000..e7ec649b80 --- /dev/null +++ b/arch/x86/cpu/ivybridge/gma.h @@ -0,0 +1,156 @@ +/* + * From Coreboot file of the same name + * + * Copyright (C) 2012 Chromium OS Authors + * + * SPDX-License-Identifier: GPL-2.0 + */ + +/* mailbox 0: header */ +__packed struct opregion_header { + u8 signature[16]; + u32 size; + u32 version; + u8 sbios_version[32]; + u8 vbios_version[16]; + u8 driver_version[16]; + u32 mailboxes; + u8 reserved[164]; +}; + +#define IGD_OPREGION_SIGNATURE "IntelGraphicsMem" +#define IGD_OPREGION_VERSION 2 + +#define IGD_MBOX1 (1 << 0) +#define IGD_MBOX2 (1 << 1) +#define IGD_MBOX3 (1 << 2) +#define IGD_MBOX4 (1 << 3) +#define IGD_MBOX5 (1 << 4) + +#define MAILBOXES_MOBILE (IGD_MBOX1 | IGD_MBOX2 | IGD_MBOX3 | \ + IGD_MBOX4 | IGD_MBOX5) +#define MAILBOXES_DESKTOP (IGD_MBOX2 | IGD_MBOX4) + +#define SBIOS_VERSION_SIZE 32 + +/* mailbox 1: public acpi methods */ +__packed struct opregion_mailbox1 { + u32 drdy; + u32 csts; + u32 cevt; + u8 reserved1[20]; + u32 didl[8]; + u32 cpdl[8]; + u32 cadl[8]; + u32 nadl[8]; + u32 aslp; + u32 tidx; + u32 chpd; + u32 clid; + u32 cdck; + u32 sxsw; + u32 evts; + u32 cnot; + u32 nrdy; + u8 reserved2[60]; +}; + +/* mailbox 2: software sci interface */ +__packed struct opregion_mailbox2 { + u32 scic; + u32 parm; + u32 dslp; + u8 reserved[244]; +}; + +/* mailbox 3: power conservation */ +__packed struct opregion_mailbox3 { + u32 ardy; + u32 aslc; + u32 tche; + u32 alsi; + u32 bclp; + u32 pfit; + u32 cblv; + u16 bclm[20]; + u32 cpfm; + u32 epfm; + u8 plut[74]; + u32 pfmb; + u32 ccdv; + u32 pcft; + u8 reserved[94]; +}; + +#define IGD_BACKLIGHT_BRIGHTNESS 0xff +#define IGD_INITIAL_BRIGHTNESS 0x64 + +#define IGD_FIELD_VALID (1 << 31) +#define IGD_WORD_FIELD_VALID (1 << 15) +#define IGD_PFIT_STRETCH 6 + +/* mailbox 4: vbt */ +__packed struct { + u8 gvd1[7168]; +} opregion_vbt_t; + +/* IGD OpRegion */ +__packed struct igd_opregion { + opregion_header_t header; + opregion_mailbox1_t mailbox1; + opregion_mailbox2_t mailbox2; + opregion_mailbox3_t mailbox3; + opregion_vbt_t vbt; +}; + +/* Intel Video BIOS (Option ROM) */ +__packed struct optionrom_header { + u16 signature; + u8 size; + u8 reserved[21]; + u16 pcir_offset; + u16 vbt_offset; +}; + +#define OPROM_SIGNATURE 0xaa55 + +__packed struct optionrom_pcir { + u32 signature; + u16 vendor; + u16 device; + u16 reserved1; + u16 length; + u8 revision; + u8 classcode[3]; + u16 imagelength; + u16 coderevision; + u8 codetype; + u8 indicator; + u16 reserved2; +}; + +__packed struct optionrom_vbt { + u8 hdr_signature[20]; + u16 hdr_version; + u16 hdr_size; + u16 hdr_vbt_size; + u8 hdr_vbt_checksum; + u8 hdr_reserved; + u32 hdr_vbt_datablock; + u32 hdr_aim[4]; + u8 datahdr_signature[16]; + u16 datahdr_version; + u16 datahdr_size; + u16 datahdr_datablocksize; + u8 coreblock_id; + u16 coreblock_size; + u16 coreblock_biossize; + u8 coreblock_biostype; + u8 coreblock_releasestatus; + u8 coreblock_hwsupported; + u8 coreblock_integratedhw; + u8 coreblock_biosbuild[4]; + u8 coreblock_biossignon[155]; +}; + +#define VBT_SIGNATURE 0x54425624 diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c index 621ef2cee6..43fdd31428 100644 --- a/arch/x86/cpu/ivybridge/lpc.c +++ b/arch/x86/cpu/ivybridge/lpc.c @@ -9,10 +9,460 @@ #include <common.h> #include <errno.h> #include <fdtdec.h> +#include <rtc.h> #include <pci.h> +#include <asm/acpi.h> +#include <asm/interrupt.h> +#include <asm/io.h> +#include <asm/ioapic.h> #include <asm/pci.h> #include <asm/arch/pch.h> +#define NMI_OFF 0 + +#define ENABLE_ACPI_MODE_IN_COREBOOT 0 +#define TEST_SMM_FLASH_LOCKDOWN 0 + +static int pch_enable_apic(pci_dev_t dev) +{ + u32 reg32; + int i; + + /* Enable ACPI I/O and power management. Set SCI IRQ to IRQ9 */ + pci_write_config8(dev, ACPI_CNTL, 0x80); + + writel(0, IO_APIC_INDEX); + writel(1 << 25, IO_APIC_DATA); + + /* affirm full set of redirection table entries ("write once") */ + writel(1, IO_APIC_INDEX); + reg32 = readl(IO_APIC_DATA); + writel(1, IO_APIC_INDEX); + writel(reg32, IO_APIC_DATA); + + writel(0, IO_APIC_INDEX); + reg32 = readl(IO_APIC_DATA); + debug("PCH APIC ID = %x\n", (reg32 >> 24) & 0x0f); + if (reg32 != (1 << 25)) { + printf("APIC Error - cannot write to registers\n"); + return -EPERM; + } + + debug("Dumping IOAPIC registers\n"); + for (i = 0; i < 3; i++) { + writel(i, IO_APIC_INDEX); + debug(" reg 0x%04x:", i); + reg32 = readl(IO_APIC_DATA); + debug(" 0x%08x\n", reg32); + } + + /* Select Boot Configuration register. */ + writel(3, IO_APIC_INDEX); + + /* Use Processor System Bus to deliver interrupts. */ + writel(1, IO_APIC_DATA); + + return 0; +} + +static void pch_enable_serial_irqs(pci_dev_t dev) +{ + u32 value; + + /* Set packet length and toggle silent mode bit for one frame. */ + value = (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0); +#ifdef CONFIG_SERIRQ_CONTINUOUS_MODE + pci_write_config8(dev, SERIRQ_CNTL, value); +#else + pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6)); +#endif +} + +static int pch_pirq_init(const void *blob, int node, pci_dev_t dev) +{ + uint8_t route[8], *ptr; + + if (fdtdec_get_byte_array(blob, node, "intel,pirq-routing", route, + sizeof(route))) + return -EINVAL; + ptr = route; + pci_write_config8(dev, PIRQA_ROUT, *ptr++); + pci_write_config8(dev, PIRQB_ROUT, *ptr++); + pci_write_config8(dev, PIRQC_ROUT, *ptr++); + pci_write_config8(dev, PIRQD_ROUT, *ptr++); + + pci_write_config8(dev, PIRQE_ROUT, *ptr++); + pci_write_config8(dev, PIRQF_ROUT, *ptr++); + pci_write_config8(dev, PIRQG_ROUT, *ptr++); + pci_write_config8(dev, PIRQH_ROUT, *ptr++); + + /* + * TODO(sjg@chromium.org): U-Boot does not set up the interrupts + * here. It's unclear if it is needed + */ + return 0; +} + +static int pch_gpi_routing(const void *blob, int node, pci_dev_t dev) +{ + u8 route[16]; + u32 reg; + int gpi; + + if (fdtdec_get_byte_array(blob, node, "intel,gpi-routing", route, + sizeof(route))) + return -EINVAL; + + for (reg = 0, gpi = 0; gpi < ARRAY_SIZE(route); gpi++) + reg |= route[gpi] << (gpi * 2); + + pci_write_config32(dev, 0xb8, reg); + + return 0; +} + +static int pch_power_options(const void *blob, int node, pci_dev_t dev) +{ + u8 reg8; + u16 reg16, pmbase; + u32 reg32; + const char *state; + int pwr_on; + int nmi_option; + int ret; + + /* + * Which state do we want to goto after g3 (power restored)? + * 0 == S0 Full On + * 1 == S5 Soft Off + * + * If the option is not existent (Laptops), use Kconfig setting. + * TODO(sjg@chromium.org): Make this configurable + */ + pwr_on = MAINBOARD_POWER_ON; + + reg16 = pci_read_config16(dev, GEN_PMCON_3); + reg16 &= 0xfffe; + switch (pwr_on) { + case MAINBOARD_POWER_OFF: + reg16 |= 1; + state = "off"; + break; + case MAINBOARD_POWER_ON: + reg16 &= ~1; + state = "on"; + break; + case MAINBOARD_POWER_KEEP: + reg16 &= ~1; + state = "state keep"; + break; + default: + state = "undefined"; + } + + reg16 &= ~(3 << 4); /* SLP_S4# Assertion Stretch 4s */ + reg16 |= (1 << 3); /* SLP_S4# Assertion Stretch Enable */ + + reg16 &= ~(1 << 10); + reg16 |= (1 << 11); /* SLP_S3# Min Assertion Width 50ms */ + + reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */ + + pci_write_config16(dev, GEN_PMCON_3, reg16); + debug("Set power %s after power failure.\n", state); + + /* Set up NMI on errors. */ + reg8 = inb(0x61); + reg8 &= 0x0f; /* Higher Nibble must be 0 */ + reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ + reg8 |= (1 << 2); /* PCI SERR# Disable for now */ + outb(reg8, 0x61); + + reg8 = inb(0x70); + /* TODO(sjg@chromium.org): Make this configurable */ + nmi_option = NMI_OFF; + if (nmi_option) { + debug("NMI sources enabled.\n"); + reg8 &= ~(1 << 7); /* Set NMI. */ + } else { + debug("NMI sources disabled.\n"); + /* Can't mask NMI from PCI-E and NMI_NOW */ + reg8 |= (1 << 7); + } + outb(reg8, 0x70); + + /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */ + reg16 = pci_read_config16(dev, GEN_PMCON_1); + reg16 &= ~(3 << 0); /* SMI# rate 1 minute */ + reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */ +#if DEBUG_PERIODIC_SMIS + /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using periodic SMIs */ + reg16 |= (3 << 0); /* Periodic SMI every 8s */ +#endif + pci_write_config16(dev, GEN_PMCON_1, reg16); + + /* Set the board's GPI routing. */ + ret = pch_gpi_routing(blob, node, dev); + if (ret) + return ret; + + pmbase = pci_read_config16(dev, 0x40) & 0xfffe; + + writel(pmbase + GPE0_EN, fdtdec_get_int(blob, node, + "intel,gpe0-enable", 0)); + writew(pmbase + ALT_GP_SMI_EN, fdtdec_get_int(blob, node, + "intel,alt-gp-smi-enable", 0)); + + /* Set up power management block and determine sleep mode */ + reg32 = inl(pmbase + 0x04); /* PM1_CNT */ + reg32 &= ~(7 << 10); /* SLP_TYP */ + reg32 |= (1 << 0); /* SCI_EN */ + outl(reg32, pmbase + 0x04); + + /* Clear magic status bits to prevent unexpected wake */ + setbits_le32(RCB_REG(0x3310), (1 << 4) | (1 << 5) | (1 << 0)); + clrbits_le32(RCB_REG(0x3f02), 0xf); + + return 0; +} + +static void pch_rtc_init(pci_dev_t dev) +{ + int rtc_failed; + u8 reg8; + + reg8 = pci_read_config8(dev, GEN_PMCON_3); + rtc_failed = reg8 & RTC_BATTERY_DEAD; + if (rtc_failed) { + reg8 &= ~RTC_BATTERY_DEAD; + pci_write_config8(dev, GEN_PMCON_3, reg8); + } + debug("rtc_failed = 0x%x\n", rtc_failed); + +#if CONFIG_HAVE_ACPI_RESUME + /* Avoid clearing pending interrupts and resetting the RTC control + * register in the resume path because the Linux kernel relies on + * this to know if it should restart the RTC timerqueue if the wake + * was due to the RTC alarm. + */ + if (acpi_get_slp_type() == 3) + return; +#endif + /* TODO: Handle power failure */ + if (rtc_failed) + printf("RTC power failed\n"); + rtc_init(); +} + +/* CougarPoint PCH Power Management init */ +static void cpt_pm_init(pci_dev_t dev) +{ + debug("CougarPoint PM init\n"); + pci_write_config8(dev, 0xa9, 0x47); + setbits_le32(RCB_REG(0x2238), (1 << 6) | (1 << 0)); + + setbits_le32(RCB_REG(0x228c), 1 << 0); + setbits_le32(RCB_REG(0x1100), (1 << 13) | (1 << 14)); + setbits_le32(RCB_REG(0x0900), 1 << 14); + writel(0xc0388400, RCB_REG(0x2304)); + setbits_le32(RCB_REG(0x2314), (1 << 5) | (1 << 18)); + setbits_le32(RCB_REG(0x2320), (1 << 15) | (1 << 1)); + clrsetbits_le32(RCB_REG(0x3314), ~0x1f, 0xf); + writel(0x050f0000, RCB_REG(0x3318)); + writel(0x04000000, RCB_REG(0x3324)); + setbits_le32(RCB_REG(0x3340), 0xfffff); + setbits_le32(RCB_REG(0x3344), 1 << 1); + + writel(0x0001c000, RCB_REG(0x3360)); + writel(0x00061100, RCB_REG(0x3368)); + writel(0x7f8fdfff, RCB_REG(0x3378)); + writel(0x000003fc, RCB_REG(0x337c)); + writel(0x00001000, RCB_REG(0x3388)); + writel(0x0001c000, RCB_REG(0x3390)); + writel(0x00000800, RCB_REG(0x33a0)); + writel(0x00001000, RCB_REG(0x33b0)); + writel(0x00093900, RCB_REG(0x33c0)); + writel(0x24653002, RCB_REG(0x33cc)); + writel(0x062108fe, RCB_REG(0x33d0)); + clrsetbits_le32(RCB_REG(0x33d4), 0x0fff0fff, 0x00670060); + writel(0x01010000, RCB_REG(0x3a28)); + writel(0x01010404, RCB_REG(0x3a2c)); + writel(0x01041041, RCB_REG(0x3a80)); + clrsetbits_le32(RCB_REG(0x3a84), 0x0000ffff, 0x00001001); + setbits_le32(RCB_REG(0x3a84), 1 << 24); /* SATA 2/3 disabled */ + setbits_le32(RCB_REG(0x3a88), 1 << 0); /* SATA 4/5 disabled */ + writel(0x00000001, RCB_REG(0x3a6c)); + clrsetbits_le32(RCB_REG(0x2344), ~0x00ffff00, 0xff00000c); + clrsetbits_le32(RCB_REG(0x80c), 0xff << 20, 0x11 << 20); + writel(0, RCB_REG(0x33c8)); + setbits_le32(RCB_REG(0x21b0), 0xf); +} + +/* PantherPoint PCH Power Management init */ +static void ppt_pm_init(pci_dev_t dev) +{ + debug("PantherPoint PM init\n"); + pci_write_config8(dev, 0xa9, 0x47); + setbits_le32(RCB_REG(0x2238), 1 << 0); + setbits_le32(RCB_REG(0x228c), 1 << 0); + setbits_le16(RCB_REG(0x1100), (1 << 13) | (1 << 14)); + setbits_le16(RCB_REG(0x0900), 1 << 14); + writel(0xc03b8400, RCB_REG(0x2304)); + setbits_le32(RCB_REG(0x2314), (1 << 5) | (1 << 18)); + setbits_le32(RCB_REG(0x2320), (1 << 15) | (1 << 1)); + clrsetbits_le32(RCB_REG(0x3314), 0x1f, 0xf); + writel(0x054f0000, RCB_REG(0x3318)); + writel(0x04000000, RCB_REG(0x3324)); + setbits_le32(RCB_REG(0x3340), 0xfffff); + setbits_le32(RCB_REG(0x3344), (1 << 1) | (1 << 0)); + writel(0x0001c000, RCB_REG(0x3360)); + writel(0x00061100, RCB_REG(0x3368)); + writel(0x7f8fdfff, RCB_REG(0x3378)); + writel(0x000003fd, RCB_REG(0x337c)); + writel(0x00001000, RCB_REG(0x3388)); + writel(0x0001c000, RCB_REG(0x3390)); + writel(0x00000800, RCB_REG(0x33a0)); + writel(0x00001000, RCB_REG(0x33b0)); + writel(0x00093900, RCB_REG(0x33c0)); + writel(0x24653002, RCB_REG(0x33cc)); + writel(0x067388fe, RCB_REG(0x33d0)); + clrsetbits_le32(RCB_REG(0x33d4), 0x0fff0fff, 0x00670060); + writel(0x01010000, RCB_REG(0x3a28)); + writel(0x01010404, RCB_REG(0x3a2c)); + writel(0x01040000, RCB_REG(0x3a80)); + clrsetbits_le32(RCB_REG(0x3a84), 0x0000ffff, 0x00001001); + /* SATA 2/3 disabled */ + setbits_le32(RCB_REG(0x3a84), 1 << 24); + /* SATA 4/5 disabled */ + setbits_le32(RCB_REG(0x3a88), 1 << 0); + writel(0x00000001, RCB_REG(0x3a6c)); + clrsetbits_le32(RCB_REG(0x2344), 0xff0000ff, 0xff00000c); + clrsetbits_le32(RCB_REG(0x80c), 0xff << 20, 0x11 << 20); + setbits_le32(RCB_REG(0x33a4), (1 << 0)); + writel(0, RCB_REG(0x33c8)); + setbits_le32(RCB_REG(0x21b0), 0xf); +} + +static void enable_hpet(void) +{ + /* Move HPET to default address 0xfed00000 and enable it */ + clrsetbits_le32(RCB_REG(HPTC), 3 << 0, 1 << 7); +} + +static void enable_clock_gating(pci_dev_t dev) +{ + u32 reg32; + u16 reg16; + + setbits_le32(RCB_REG(0x2234), 0xf); + + reg16 = pci_read_config16(dev, GEN_PMCON_1); + reg16 |= (1 << 2) | (1 << 11); + pci_write_config16(dev, GEN_PMCON_1, reg16); + + pch_iobp_update(0xEB007F07, ~0UL, (1 << 31)); + pch_iobp_update(0xEB004000, ~0UL, (1 << 7)); + pch_iobp_update(0xEC007F07, ~0UL, (1 << 31)); + pch_iobp_update(0xEC004000, ~0UL, (1 << 7)); + + reg32 = readl(RCB_REG(CG)); + reg32 |= (1 << 31); + reg32 |= (1 << 29) | (1 << 28); + reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24); + reg32 |= (1 << 16); + reg32 |= (1 << 17); + reg32 |= (1 << 18); + reg32 |= (1 << 22); + reg32 |= (1 << 23); + reg32 &= ~(1 << 20); + reg32 |= (1 << 19); + reg32 |= (1 << 0); + reg32 |= (0xf << 1); + writel(reg32, RCB_REG(CG)); + + setbits_le32(RCB_REG(0x38c0), 0x7); + setbits_le32(RCB_REG(0x36d4), 0x6680c004); + setbits_le32(RCB_REG(0x3564), 0x3); +} + +#if CONFIG_HAVE_SMI_HANDLER +static void pch_lock_smm(pci_dev_t dev) +{ +#if TEST_SMM_FLASH_LOCKDOWN + u8 reg8; +#endif + + if (acpi_slp_type != 3) { +#if ENABLE_ACPI_MODE_IN_COREBOOT + debug("Enabling ACPI via APMC:\n"); + outb(0xe1, 0xb2); /* Enable ACPI mode */ + debug("done.\n"); +#else + debug("Disabling ACPI via APMC:\n"); + outb(0x1e, 0xb2); /* Disable ACPI mode */ + debug("done.\n"); +#endif + } + + /* Don't allow evil boot loaders, kernels, or + * userspace applications to deceive us: + */ + smm_lock(); + +#if TEST_SMM_FLASH_LOCKDOWN + /* Now try this: */ + debug("Locking BIOS to RO... "); + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off", + (reg8 & 1) ? "rw" : "ro"); + reg8 &= ~(1 << 0); /* clear BIOSWE */ + pci_write_config8(dev, 0xdc, reg8); + reg8 |= (1 << 1); /* set BLE */ + pci_write_config8(dev, 0xdc, reg8); + debug("ok.\n"); + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off", + (reg8 & 1) ? "rw" : "ro"); + + debug("Writing:\n"); + writeb(0, 0xfff00000); + debug("Testing:\n"); + reg8 |= (1 << 0); /* set BIOSWE */ + pci_write_config8(dev, 0xdc, reg8); + + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off", + (reg8 & 1) ? "rw" : "ro"); + debug("Done.\n"); +#endif +} +#endif + +static void pch_disable_smm_only_flashing(pci_dev_t dev) +{ + u8 reg8; + + debug("Enabling BIOS updates outside of SMM... "); + reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + reg8 &= ~(1 << 5); + pci_write_config8(dev, 0xdc, reg8); +} + +static void pch_fixups(pci_dev_t dev) +{ + u8 gen_pmcon_2; + + /* Indicate DRAM init done for MRC S3 to know it can resume */ + gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2); + gen_pmcon_2 |= (1 << 7); + pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2); + + /* Enable DMI ASPM in the PCH */ + clrbits_le32(RCB_REG(0x2304), 1 << 10); + setbits_le32(RCB_REG(0x21a4), (1 << 11) | (1 << 10)); + setbits_le32(RCB_REG(0x21a8), 0x3); +} + int lpc_early_init(const void *blob, int node, pci_dev_t dev) { struct reg_info { @@ -22,7 +472,7 @@ int lpc_early_init(const void *blob, int node, pci_dev_t dev) int count; int i; - count = fdtdec_get_int_array_count(blob, node, "gen-dec", + count = fdtdec_get_int_array_count(blob, node, "intel,gen-dec", (u32 *)values, sizeof(values) / sizeof(u32)); if (count < 0) return -EINVAL; @@ -46,3 +496,74 @@ int lpc_early_init(const void *blob, int node, pci_dev_t dev) return 0; } + +int lpc_init(struct pci_controller *hose, pci_dev_t dev) +{ + const void *blob = gd->fdt_blob; + int node; + + debug("pch: lpc_init\n"); + pci_write_bar32(hose, dev, 0, 0); + pci_write_bar32(hose, dev, 1, 0xff800000); + pci_write_bar32(hose, dev, 2, 0xfec00000); + pci_write_bar32(hose, dev, 3, 0x800); + pci_write_bar32(hose, dev, 4, 0x900); + + node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_LPC); + if (node < 0) + return -ENOENT; + + /* Set the value for PCI command register. */ + pci_write_config16(dev, PCI_COMMAND, 0x000f); + + /* IO APIC initialization. */ + pch_enable_apic(dev); + + pch_enable_serial_irqs(dev); + + /* Setup the PIRQ. */ + pch_pirq_init(blob, node, dev); + + /* Setup power options. */ + pch_power_options(blob, node, dev); + + /* Initialize power management */ + switch (pch_silicon_type()) { + case PCH_TYPE_CPT: /* CougarPoint */ + cpt_pm_init(dev); + break; + case PCH_TYPE_PPT: /* PantherPoint */ + ppt_pm_init(dev); + break; + default: + printf("Unknown Chipset: %#02x.%dx\n", PCI_DEV(dev), + PCI_FUNC(dev)); + return -ENOSYS; + } + + /* Initialize the real time clock. */ + pch_rtc_init(dev); + + /* Initialize the High Precision Event Timers, if present. */ + enable_hpet(); + + /* Initialize Clock Gating */ + enable_clock_gating(dev); + + pch_disable_smm_only_flashing(dev); + +#if CONFIG_HAVE_SMI_HANDLER + pch_lock_smm(dev); +#endif + + pch_fixups(dev); + + return 0; +} + +void lpc_enable(pci_dev_t dev) +{ + /* Enable PCH Display Port */ + writew(0x0010, RCB_REG(DISPBDF)); + setbits_le32(RCB_REG(FD2), PCH_ENABLE_DBDF); +} diff --git a/arch/x86/cpu/ivybridge/model_206ax.c b/arch/x86/cpu/ivybridge/model_206ax.c new file mode 100644 index 0000000000..11dc625da9 --- /dev/null +++ b/arch/x86/cpu/ivybridge/model_206ax.c @@ -0,0 +1,514 @@ +/* + * From Coreboot file of same name + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The Chromium Authors + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <fdtdec.h> +#include <malloc.h> +#include <asm/acpi.h> +#include <asm/cpu.h> +#include <asm/lapic.h> +#include <asm/lapic_def.h> +#include <asm/msr.h> +#include <asm/mtrr.h> +#include <asm/processor.h> +#include <asm/speedstep.h> +#include <asm/turbo.h> +#include <asm/arch/model_206ax.h> + +static void enable_vmx(void) +{ + struct cpuid_result regs; +#ifdef CONFIG_ENABLE_VMX + int enable = true; +#else + int enable = false; +#endif + msr_t msr; + + regs = cpuid(1); + /* Check that the VMX is supported before reading or writing the MSR. */ + if (!((regs.ecx & CPUID_VMX) || (regs.ecx & CPUID_SMX))) + return; + + msr = msr_read(MSR_IA32_FEATURE_CONTROL); + + if (msr.lo & (1 << 0)) { + debug("VMX is locked, so %s will do nothing\n", __func__); + /* VMX locked. If we set it again we get an illegal + * instruction + */ + return; + } + + /* The IA32_FEATURE_CONTROL MSR may initialize with random values. + * It must be cleared regardless of VMX config setting. + */ + msr.hi = 0; + msr.lo = 0; + + debug("%s VMX\n", enable ? "Enabling" : "Disabling"); + + /* + * Even though the Intel manual says you must set the lock bit in + * addition to the VMX bit in order for VMX to work, it is incorrect. + * Thus we leave it unlocked for the OS to manage things itself. + * This is good for a few reasons: + * - No need to reflash the bios just to toggle the lock bit. + * - The VMX bits really really should match each other across cores, + * so hard locking it on one while another has the opposite setting + * can easily lead to crashes as code using VMX migrates between + * them. + * - Vendors that want to "upsell" from a bios that disables+locks to + * one that doesn't is sleazy. + * By leaving this to the OS (e.g. Linux), people can do exactly what + * they want on the fly, and do it correctly (e.g. across multiple + * cores). + */ + if (enable) { + msr.lo |= (1 << 2); + if (regs.ecx & CPUID_SMX) + msr.lo |= (1 << 1); + } + + msr_write(MSR_IA32_FEATURE_CONTROL, msr); +} + +/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */ +static const u8 power_limit_time_sec_to_msr[] = { + [0] = 0x00, + [1] = 0x0a, + [2] = 0x0b, + [3] = 0x4b, + [4] = 0x0c, + [5] = 0x2c, + [6] = 0x4c, + [7] = 0x6c, + [8] = 0x0d, + [10] = 0x2d, + [12] = 0x4d, + [14] = 0x6d, + [16] = 0x0e, + [20] = 0x2e, + [24] = 0x4e, + [28] = 0x6e, + [32] = 0x0f, + [40] = 0x2f, + [48] = 0x4f, + [56] = 0x6f, + [64] = 0x10, + [80] = 0x30, + [96] = 0x50, + [112] = 0x70, + [128] = 0x11, +}; + +/* Convert POWER_LIMIT_1_TIME MSR value to seconds */ +static const u8 power_limit_time_msr_to_sec[] = { + [0x00] = 0, + [0x0a] = 1, + [0x0b] = 2, + [0x4b] = 3, + [0x0c] = 4, + [0x2c] = 5, + [0x4c] = 6, + [0x6c] = 7, + [0x0d] = 8, + [0x2d] = 10, + [0x4d] = 12, + [0x6d] = 14, + [0x0e] = 16, + [0x2e] = 20, + [0x4e] = 24, + [0x6e] = 28, + [0x0f] = 32, + [0x2f] = 40, + [0x4f] = 48, + [0x6f] = 56, + [0x10] = 64, + [0x30] = 80, + [0x50] = 96, + [0x70] = 112, + [0x11] = 128, +}; + +int cpu_config_tdp_levels(void) +{ + struct cpuid_result result; + msr_t platform_info; + + /* Minimum CPU revision */ + result = cpuid(1); + if (result.eax < IVB_CONFIG_TDP_MIN_CPUID) + return 0; + + /* Bits 34:33 indicate how many levels supported */ + platform_info = msr_read(MSR_PLATFORM_INFO); + return (platform_info.hi >> 1) & 3; +} + +/* + * Configure processor power limits if possible + * This must be done AFTER set of BIOS_RESET_CPL + */ +void set_power_limits(u8 power_limit_1_time) +{ + msr_t msr = msr_read(MSR_PLATFORM_INFO); + msr_t limit; + unsigned power_unit; + unsigned tdp, min_power, max_power, max_time; + u8 power_limit_1_val; + + if (power_limit_1_time > ARRAY_SIZE(power_limit_time_sec_to_msr)) + return; + + if (!(msr.lo & PLATFORM_INFO_SET_TDP)) + return; + + /* Get units */ + msr = msr_read(MSR_PKG_POWER_SKU_UNIT); + power_unit = 2 << ((msr.lo & 0xf) - 1); + + /* Get power defaults for this SKU */ + msr = msr_read(MSR_PKG_POWER_SKU); + tdp = msr.lo & 0x7fff; + min_power = (msr.lo >> 16) & 0x7fff; + max_power = msr.hi & 0x7fff; + max_time = (msr.hi >> 16) & 0x7f; + + debug("CPU TDP: %u Watts\n", tdp / power_unit); + + if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time) + power_limit_1_time = power_limit_time_msr_to_sec[max_time]; + + if (min_power > 0 && tdp < min_power) + tdp = min_power; + + if (max_power > 0 && tdp > max_power) + tdp = max_power; + + power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time]; + + /* Set long term power limit to TDP */ + limit.lo = 0; + limit.lo |= tdp & PKG_POWER_LIMIT_MASK; + limit.lo |= PKG_POWER_LIMIT_EN; + limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) << + PKG_POWER_LIMIT_TIME_SHIFT; + + /* Set short term power limit to 1.25 * TDP */ + limit.hi = 0; + limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK; + limit.hi |= PKG_POWER_LIMIT_EN; + /* Power limit 2 time is only programmable on SNB EP/EX */ + + msr_write(MSR_PKG_POWER_LIMIT, limit); + + /* Use nominal TDP values for CPUs with configurable TDP */ + if (cpu_config_tdp_levels()) { + msr = msr_read(MSR_CONFIG_TDP_NOMINAL); + limit.hi = 0; + limit.lo = msr.lo & 0xff; + msr_write(MSR_TURBO_ACTIVATION_RATIO, limit); + } +} + +static void configure_c_states(void) +{ + struct cpuid_result result; + msr_t msr; + + msr = msr_read(MSR_PMG_CST_CONFIG_CTL); + msr.lo |= (1 << 28); /* C1 Auto Undemotion Enable */ + msr.lo |= (1 << 27); /* C3 Auto Undemotion Enable */ + msr.lo |= (1 << 26); /* C1 Auto Demotion Enable */ + msr.lo |= (1 << 25); /* C3 Auto Demotion Enable */ + msr.lo &= ~(1 << 10); /* Disable IO MWAIT redirection */ + msr.lo |= 7; /* No package C-state limit */ + msr_write(MSR_PMG_CST_CONFIG_CTL, msr); + + msr = msr_read(MSR_PMG_IO_CAPTURE_ADR); + msr.lo &= ~0x7ffff; + msr.lo |= (PMB0_BASE + 4); /* LVL_2 base address */ + msr.lo |= (2 << 16); /* CST Range: C7 is max C-state */ + msr_write(MSR_PMG_IO_CAPTURE_ADR, msr); + + msr = msr_read(MSR_MISC_PWR_MGMT); + msr.lo &= ~(1 << 0); /* Enable P-state HW_ALL coordination */ + msr_write(MSR_MISC_PWR_MGMT, msr); + + msr = msr_read(MSR_POWER_CTL); + msr.lo |= (1 << 18); /* Enable Energy Perf Bias MSR 0x1b0 */ + msr.lo |= (1 << 1); /* C1E Enable */ + msr.lo |= (1 << 0); /* Bi-directional PROCHOT# */ + msr_write(MSR_POWER_CTL, msr); + + /* C3 Interrupt Response Time Limit */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | 0x50; + msr_write(MSR_PKGC3_IRTL, msr); + + /* C6 Interrupt Response Time Limit */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | 0x68; + msr_write(MSR_PKGC6_IRTL, msr); + + /* C7 Interrupt Response Time Limit */ + msr.hi = 0; + msr.lo = IRTL_VALID | IRTL_1024_NS | 0x6D; + msr_write(MSR_PKGC7_IRTL, msr); + + /* Primary Plane Current Limit */ + msr = msr_read(MSR_PP0_CURRENT_CONFIG); + msr.lo &= ~0x1fff; + msr.lo |= PP0_CURRENT_LIMIT; + msr_write(MSR_PP0_CURRENT_CONFIG, msr); + + /* Secondary Plane Current Limit */ + msr = msr_read(MSR_PP1_CURRENT_CONFIG); + msr.lo &= ~0x1fff; + result = cpuid(1); + if (result.eax >= 0x30600) + msr.lo |= PP1_CURRENT_LIMIT_IVB; + else + msr.lo |= PP1_CURRENT_LIMIT_SNB; + msr_write(MSR_PP1_CURRENT_CONFIG, msr); +} + +static int configure_thermal_target(void) +{ + int tcc_offset; + msr_t msr; + int node; + + /* Find pointer to CPU configuration */ + node = fdtdec_next_compatible(gd->fdt_blob, 0, + COMPAT_INTEL_MODEL_206AX); + if (node < 0) + return -ENOENT; + tcc_offset = fdtdec_get_int(gd->fdt_blob, node, "tcc-offset", 0); + + /* Set TCC activaiton offset if supported */ + msr = msr_read(MSR_PLATFORM_INFO); + if ((msr.lo & (1 << 30)) && tcc_offset) { + msr = msr_read(MSR_TEMPERATURE_TARGET); + msr.lo &= ~(0xf << 24); /* Bits 27:24 */ + msr.lo |= (tcc_offset & 0xf) << 24; + msr_write(MSR_TEMPERATURE_TARGET, msr); + } + + return 0; +} + +static void configure_misc(void) +{ + msr_t msr; + + msr = msr_read(IA32_MISC_ENABLE); + msr.lo |= (1 << 0); /* Fast String enable */ + msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */ + msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */ + msr_write(IA32_MISC_ENABLE, msr); + + /* Disable Thermal interrupts */ + msr.lo = 0; + msr.hi = 0; + msr_write(IA32_THERM_INTERRUPT, msr); + + /* Enable package critical interrupt only */ + msr.lo = 1 << 4; + msr.hi = 0; + msr_write(IA32_PACKAGE_THERM_INTERRUPT, msr); +} + +static void enable_lapic_tpr(void) +{ + msr_t msr; + + msr = msr_read(MSR_PIC_MSG_CONTROL); + msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */ + msr_write(MSR_PIC_MSG_CONTROL, msr); +} + +static void configure_dca_cap(void) +{ + struct cpuid_result cpuid_regs; + msr_t msr; + + /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */ + cpuid_regs = cpuid(1); + if (cpuid_regs.ecx & (1 << 18)) { + msr = msr_read(IA32_PLATFORM_DCA_CAP); + msr.lo |= 1; + msr_write(IA32_PLATFORM_DCA_CAP, msr); + } +} + +static void set_max_ratio(void) +{ + msr_t msr, perf_ctl; + + perf_ctl.hi = 0; + + /* Check for configurable TDP option */ + if (cpu_config_tdp_levels()) { + /* Set to nominal TDP ratio */ + msr = msr_read(MSR_CONFIG_TDP_NOMINAL); + perf_ctl.lo = (msr.lo & 0xff) << 8; + } else { + /* Platform Info bits 15:8 give max ratio */ + msr = msr_read(MSR_PLATFORM_INFO); + perf_ctl.lo = msr.lo & 0xff00; + } + msr_write(IA32_PERF_CTL, perf_ctl); + + debug("model_x06ax: frequency set to %d\n", + ((perf_ctl.lo >> 8) & 0xff) * SANDYBRIDGE_BCLK); +} + +static void set_energy_perf_bias(u8 policy) +{ + msr_t msr; + + /* Energy Policy is bits 3:0 */ + msr = msr_read(IA32_ENERGY_PERFORMANCE_BIAS); + msr.lo &= ~0xf; + msr.lo |= policy & 0xf; + msr_write(IA32_ENERGY_PERFORMANCE_BIAS, msr); + + debug("model_x06ax: energy policy set to %u\n", policy); +} + +static void configure_mca(void) +{ + msr_t msr; + int i; + + msr.lo = 0; + msr.hi = 0; + /* This should only be done on a cold boot */ + for (i = 0; i < 7; i++) + msr_write(IA32_MC0_STATUS + (i * 4), msr); +} + +#if CONFIG_USBDEBUG +static unsigned ehci_debug_addr; +#endif + +/* + * Initialize any extra cores/threads in this package. + */ +static int intel_cores_init(struct x86_cpu_priv *cpu) +{ + struct cpuid_result result; + unsigned threads_per_package, threads_per_core, i; + + /* Logical processors (threads) per core */ + result = cpuid_ext(0xb, 0); + threads_per_core = result.ebx & 0xffff; + + /* Logical processors (threads) per package */ + result = cpuid_ext(0xb, 1); + threads_per_package = result.ebx & 0xffff; + + debug("CPU: %u has %u cores, %u threads per core\n", + cpu->apic_id, threads_per_package / threads_per_core, + threads_per_core); + + for (i = 1; i < threads_per_package; ++i) { + struct x86_cpu_priv *new_cpu; + + new_cpu = calloc(1, sizeof(*new_cpu)); + if (!new_cpu) + return -ENOMEM; + + new_cpu->apic_id = cpu->apic_id + i; + + /* Update APIC ID if no hyperthreading */ + if (threads_per_core == 1) + new_cpu->apic_id <<= 1; + + debug("CPU: %u has core %u\n", cpu->apic_id, new_cpu->apic_id); + +#if CONFIG_SMP && CONFIG_MAX_CPUS > 1 + /* Start the new cpu */ + if (!start_cpu(new_cpu)) { + /* Record the error in cpu? */ + printk(BIOS_ERR, "CPU %u would not start!\n", + new_cpu->apic_id); + new_cpu->start_err = 1; + } +#endif + } + + return 0; +} + +int model_206ax_init(struct x86_cpu_priv *cpu) +{ + int ret; + + /* Clear out pending MCEs */ + configure_mca(); + +#if CONFIG_USBDEBUG + /* Is this caution really needed? */ + if (!ehci_debug_addr) + ehci_debug_addr = get_ehci_debug(); + set_ehci_debug(0); +#endif + + /* Setup MTRRs based on physical address size */ +#if 0 /* TODO: Implement this */ + struct cpuid_result cpuid_regs; + + cpuid_regs = cpuid(0x80000008); + x86_setup_fixed_mtrrs(); + x86_setup_var_mtrrs(cpuid_regs.eax & 0xff, 2); + x86_mtrr_check(); +#endif + +#if CONFIG_USBDEBUG + set_ehci_debug(ehci_debug_addr); +#endif + + /* Enable the local cpu apics */ + enable_lapic_tpr(); + lapic_setup(); + + /* Enable virtualization if enabled in CMOS */ + enable_vmx(); + + /* Configure C States */ + configure_c_states(); + + /* Configure Enhanced SpeedStep and Thermal Sensors */ + configure_misc(); + + /* Thermal throttle activation offset */ + ret = configure_thermal_target(); + if (ret) + return ret; + + /* Enable Direct Cache Access */ + configure_dca_cap(); + + /* Set energy policy */ + set_energy_perf_bias(ENERGY_POLICY_NORMAL); + + /* Set Max Ratio */ + set_max_ratio(); + + /* Enable Turbo */ + turbo_enable(); + + /* Start up extra cores */ + intel_cores_init(cpu); + + return 0; +} diff --git a/arch/x86/cpu/ivybridge/northbridge.c b/arch/x86/cpu/ivybridge/northbridge.c new file mode 100644 index 0000000000..c50b5ded83 --- /dev/null +++ b/arch/x86/cpu/ivybridge/northbridge.c @@ -0,0 +1,188 @@ +/* + * From Coreboot northbridge/intel/sandybridge/northbridge.c + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The Chromium Authors + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/msr.h> +#include <asm/acpi.h> +#include <asm/cpu.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <asm/processor.h> +#include <asm/arch/pch.h> +#include <asm/arch/model_206ax.h> +#include <asm/arch/sandybridge.h> + +static int bridge_revision_id = -1; + +int bridge_silicon_revision(void) +{ + if (bridge_revision_id < 0) { + struct cpuid_result result; + uint8_t stepping, bridge_id; + pci_dev_t dev; + + result = cpuid(1); + stepping = result.eax & 0xf; + dev = PCI_BDF(0, 0, 0); + bridge_id = pci_read_config16(dev, PCI_DEVICE_ID) & 0xf0; + bridge_revision_id = bridge_id | stepping; + } + + return bridge_revision_id; +} + +/* + * Reserve everything between A segment and 1MB: + * + * 0xa0000 - 0xbffff: legacy VGA + * 0xc0000 - 0xcffff: VGA OPROM (needed by kernel) + * 0xe0000 - 0xfffff: SeaBIOS, if used, otherwise DMI + */ +static const int legacy_hole_base_k = 0xa0000 / 1024; +static const int legacy_hole_size_k = 384; + +static int get_pcie_bar(u32 *base, u32 *len) +{ + pci_dev_t dev = PCI_BDF(0, 0, 0); + u32 pciexbar_reg; + + *base = 0; + *len = 0; + + pciexbar_reg = pci_read_config32(dev, PCIEXBAR); + + if (!(pciexbar_reg & (1 << 0))) + return 0; + + switch ((pciexbar_reg >> 1) & 3) { + case 0: /* 256MB */ + *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) | + (1 << 28)); + *len = 256 * 1024 * 1024; + return 1; + case 1: /* 128M */ + *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) | + (1 << 28) | (1 << 27)); + *len = 128 * 1024 * 1024; + return 1; + case 2: /* 64M */ + *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) | + (1 << 28) | (1 << 27) | (1 << 26)); + *len = 64 * 1024 * 1024; + return 1; + } + + return 0; +} + +static void add_fixed_resources(pci_dev_t dev, int index) +{ + u32 pcie_config_base, pcie_config_size; + + if (get_pcie_bar(&pcie_config_base, &pcie_config_size)) { + debug("Adding PCIe config bar base=0x%08x size=0x%x\n", + pcie_config_base, pcie_config_size); + } +} + +static void northbridge_dmi_init(pci_dev_t dev) +{ + /* Clear error status bits */ + writel(0xffffffff, DMIBAR_REG(0x1c4)); + writel(0xffffffff, DMIBAR_REG(0x1d0)); + + /* Steps prior to DMI ASPM */ + if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) { + clrsetbits_le32(DMIBAR_REG(0x250), (1 << 22) | (1 << 20), + 1 << 21); + } + + setbits_le32(DMIBAR_REG(0x238), 1 << 29); + + if (bridge_silicon_revision() >= SNB_STEP_D0) { + setbits_le32(DMIBAR_REG(0x1f8), 1 << 16); + } else if (bridge_silicon_revision() >= SNB_STEP_D1) { + clrsetbits_le32(DMIBAR_REG(0x1f8), 1 << 26, 1 << 16); + setbits_le32(DMIBAR_REG(0x1fc), (1 << 12) | (1 << 23)); + } + + /* Enable ASPM on SNB link, should happen before PCH link */ + if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) + setbits_le32(DMIBAR_REG(0xd04), 1 << 4); + + setbits_le32(DMIBAR_REG(0x88), (1 << 1) | (1 << 0)); +} + +void northbridge_init(pci_dev_t dev) +{ + u32 bridge_type; + + add_fixed_resources(dev, 6); + northbridge_dmi_init(dev); + + bridge_type = readl(MCHBAR_REG(0x5f10)); + bridge_type &= ~0xff; + + if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) { + /* Enable Power Aware Interrupt Routing - fixed priority */ + clrsetbits_8(MCHBAR_REG(0x5418), 0xf, 0x4); + + /* 30h for IvyBridge */ + bridge_type |= 0x30; + } else { + /* 20h for Sandybridge */ + bridge_type |= 0x20; + } + writel(bridge_type, MCHBAR_REG(0x5f10)); + + /* + * Set bit 0 of BIOS_RESET_CPL to indicate to the CPU + * that BIOS has initialized memory and power management + */ + setbits_8(MCHBAR_REG(BIOS_RESET_CPL), 1); + debug("Set BIOS_RESET_CPL\n"); + + /* Configure turbo power limits 1ms after reset complete bit */ + mdelay(1); + set_power_limits(28); + + /* + * CPUs with configurable TDP also need power limits set + * in MCHBAR. Use same values from MSR_PKG_POWER_LIMIT. + */ + if (cpu_config_tdp_levels()) { + msr_t msr = msr_read(MSR_PKG_POWER_LIMIT); + + writel(msr.lo, MCHBAR_REG(0x59A0)); + writel(msr.hi, MCHBAR_REG(0x59A4)); + } + + /* Set here before graphics PM init */ + writel(0x00100001, MCHBAR_REG(0x5500)); +} + +void northbridge_enable(pci_dev_t dev) +{ +#if CONFIG_HAVE_ACPI_RESUME + switch (pci_read_config32(dev, SKPAD)) { + case 0xcafebabe: + debug("Normal boot.\n"); + apci_set_slp_type(0); + break; + case 0xcafed00d: + debug("S3 Resume.\n"); + apci_set_slp_type(3); + break; + default: + debug("Unknown boot method, assuming normal.\n"); + apci_set_slp_type(0); + break; + } +#endif +} diff --git a/arch/x86/cpu/ivybridge/pch.c b/arch/x86/cpu/ivybridge/pch.c new file mode 100644 index 0000000000..fa04d488f3 --- /dev/null +++ b/arch/x86/cpu/ivybridge/pch.c @@ -0,0 +1,123 @@ +/* + * From Coreboot + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <asm/arch/pch.h> + +static int pch_revision_id = -1; +static int pch_type = -1; + +int pch_silicon_revision(void) +{ + pci_dev_t dev; + + dev = PCH_LPC_DEV; + + if (pch_revision_id < 0) + pch_revision_id = pci_read_config8(dev, PCI_REVISION_ID); + return pch_revision_id; +} + +int pch_silicon_type(void) +{ + pci_dev_t dev; + + dev = PCH_LPC_DEV; + + if (pch_type < 0) + pch_type = pci_read_config8(dev, PCI_DEVICE_ID + 1); + return pch_type; +} + +int pch_silicon_supported(int type, int rev) +{ + int cur_type = pch_silicon_type(); + int cur_rev = pch_silicon_revision(); + + switch (type) { + case PCH_TYPE_CPT: + /* CougarPoint minimum revision */ + if (cur_type == PCH_TYPE_CPT && cur_rev >= rev) + return 1; + /* PantherPoint any revision */ + if (cur_type == PCH_TYPE_PPT) + return 1; + break; + + case PCH_TYPE_PPT: + /* PantherPoint minimum revision */ + if (cur_type == PCH_TYPE_PPT && cur_rev >= rev) + return 1; + break; + } + + return 0; +} + +#define IOBP_RETRY 1000 +static inline int iobp_poll(void) +{ + unsigned try = IOBP_RETRY; + u32 data; + + while (try--) { + data = readl(RCB_REG(IOBPS)); + if ((data & 1) == 0) + return 1; + udelay(10); + } + + printf("IOBP timeout\n"); + return 0; +} + +void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue) +{ + u32 data; + + /* Set the address */ + writel(address, RCB_REG(IOBPIRI)); + + /* READ OPCODE */ + if (pch_silicon_supported(PCH_TYPE_CPT, PCH_STEP_B0)) + writel(IOBPS_RW_BX, RCB_REG(IOBPS)); + else + writel(IOBPS_READ_AX, RCB_REG(IOBPS)); + if (!iobp_poll()) + return; + + /* Read IOBP data */ + data = readl(RCB_REG(IOBPD)); + if (!iobp_poll()) + return; + + /* Check for successful transaction */ + if ((readl(RCB_REG(IOBPS)) & 0x6) != 0) { + printf("IOBP read 0x%08x failed\n", address); + return; + } + + /* Update the data */ + data &= andvalue; + data |= orvalue; + + /* WRITE OPCODE */ + if (pch_silicon_supported(PCH_TYPE_CPT, PCH_STEP_B0)) + writel(IOBPS_RW_BX, RCB_REG(IOBPS)); + else + writel(IOBPS_WRITE_AX, RCB_REG(IOBPS)); + if (!iobp_poll()) + return; + + /* Write IOBP data */ + writel(data, RCB_REG(IOBPD)); + if (!iobp_poll()) + return; +} diff --git a/arch/x86/cpu/ivybridge/pci.c b/arch/x86/cpu/ivybridge/pci.c index c1ae658d3f..452d1c3a15 100644 --- a/arch/x86/cpu/ivybridge/pci.c +++ b/arch/x86/cpu/ivybridge/pci.c @@ -12,6 +12,8 @@ #include <common.h> #include <pci.h> #include <asm/pci.h> +#include <asm/arch/bd82x6x.h> +#include <asm/arch/pch.h> static void config_pci_bridge(struct pci_controller *hose, pci_dev_t dev, struct pci_config_table *table) @@ -58,3 +60,41 @@ void board_pci_setup_hose(struct pci_controller *hose) hose->region_count = 3; } + +int board_pci_pre_scan(struct pci_controller *hose) +{ + pci_dev_t dev; + u16 reg16; + + bd82x6x_init(); + + reg16 = 0xff; + dev = PCH_DEV; + reg16 = pci_read_config16(dev, PCI_COMMAND); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config16(dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + pci_write_bar32(hose, dev, 0, 0xf0000000); + + return 0; +} + +int board_pci_post_scan(struct pci_controller *hose) +{ + int ret; + + ret = bd82x6x_init_pci_devices(); + if (ret) { + printf("bd82x6x_init_pci_devices() failed: %d\n", ret); + return ret; + } + + return 0; +} diff --git a/arch/x86/cpu/ivybridge/sata.c b/arch/x86/cpu/ivybridge/sata.c new file mode 100644 index 0000000000..bbcd47da60 --- /dev/null +++ b/arch/x86/cpu/ivybridge/sata.c @@ -0,0 +1,225 @@ +/* + * From Coreboot + * Copyright (C) 2008-2009 coresystems GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <fdtdec.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <asm/arch/pch.h> +#include <asm/arch/bd82x6x.h> + +static inline u32 sir_read(pci_dev_t dev, int idx) +{ + pci_write_config32(dev, SATA_SIRI, idx); + return pci_read_config32(dev, SATA_SIRD); +} + +static inline void sir_write(pci_dev_t dev, int idx, u32 value) +{ + pci_write_config32(dev, SATA_SIRI, idx); + pci_write_config32(dev, SATA_SIRD, value); +} + +static void common_sata_init(pci_dev_t dev, unsigned int port_map) +{ + u32 reg32; + u16 reg16; + + /* Set IDE I/O Configuration */ + reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0; + pci_write_config32(dev, IDE_CONFIG, reg32); + + /* Port enable */ + reg16 = pci_read_config16(dev, 0x92); + reg16 &= ~0x3f; + reg16 |= port_map; + pci_write_config16(dev, 0x92, reg16); + + /* SATA Initialization register */ + port_map &= 0xff; + pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183); +} + +void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node) +{ + unsigned int port_map, speed_support, port_tx; + struct pci_controller *hose = pci_bus_to_hose(0); + const char *mode; + u32 reg32; + u16 reg16; + + debug("SATA: Initializing...\n"); + + /* SATA configuration */ + port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0); + speed_support = fdtdec_get_int(blob, node, + "sata_interface_speed_support", 0); + + /* Enable BARs */ + pci_write_config16(dev, PCI_COMMAND, 0x0007); + + mode = fdt_getprop(blob, node, "intel,sata-mode", NULL); + if (!mode || !strcmp(mode, "ahci")) { + u32 abar; + + debug("SATA: Controller in AHCI mode\n"); + + /* Set Interrupt Line, Interrupt Pin is set by D31IP.PIP */ + pci_write_config8(dev, INTR_LN, 0x0a); + + /* Set timings */ + pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | + IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | + IDE_PPE0 | IDE_IE0 | IDE_TIME0); + pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | + IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS); + + /* Sync DMA */ + pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0); + pci_write_config16(dev, IDE_SDMA_TIM, 0x0001); + + common_sata_init(dev, 0x8000 | port_map); + + /* Initialize AHCI memory-mapped space */ + abar = pci_read_bar32(hose, dev, 5); + debug("ABAR: %08X\n", abar); + /* CAP (HBA Capabilities) : enable power management */ + reg32 = readl(abar + 0x00); + reg32 |= 0x0c006000; /* set PSC+SSC+SALP+SSS */ + reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */ + /* Set ISS, if available */ + if (speed_support) { + reg32 &= ~0x00f00000; + reg32 |= (speed_support & 0x03) << 20; + } + writel(reg32, abar + 0x00); + /* PI (Ports implemented) */ + writel(port_map, abar + 0x0c); + (void) readl(abar + 0x0c); /* Read back 1 */ + (void) readl(abar + 0x0c); /* Read back 2 */ + /* CAP2 (HBA Capabilities Extended)*/ + reg32 = readl(abar + 0x24); + reg32 &= ~0x00000002; + writel(reg32, abar + 0x24); + /* VSP (Vendor Specific Register */ + reg32 = readl(abar + 0xa0); + reg32 &= ~0x00000005; + writel(reg32, abar + 0xa0); + } else if (!strcmp(mode, "combined")) { + debug("SATA: Controller in combined mode\n"); + + /* No AHCI: clear AHCI base */ + pci_write_bar32(hose, dev, 5, 0x00000000); + /* And without AHCI BAR no memory decoding */ + reg16 = pci_read_config16(dev, PCI_COMMAND); + reg16 &= ~PCI_COMMAND_MEMORY; + pci_write_config16(dev, PCI_COMMAND, reg16); + + pci_write_config8(dev, 0x09, 0x80); + + /* Set timings */ + pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | + IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS); + pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | + IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | + IDE_PPE0 | IDE_IE0 | IDE_TIME0); + + /* Sync DMA */ + pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0); + pci_write_config16(dev, IDE_SDMA_TIM, 0x0200); + + common_sata_init(dev, port_map); + } else { + debug("SATA: Controller in plain-ide mode\n"); + + /* No AHCI: clear AHCI base */ + pci_write_bar32(hose, dev, 5, 0x00000000); + + /* And without AHCI BAR no memory decoding */ + reg16 = pci_read_config16(dev, PCI_COMMAND); + reg16 &= ~PCI_COMMAND_MEMORY; + pci_write_config16(dev, PCI_COMMAND, reg16); + + /* + * Native mode capable on both primary and secondary (0xa) + * OR'ed with enabled (0x50) = 0xf + */ + pci_write_config8(dev, 0x09, 0x8f); + + /* Set Interrupt Line */ + /* Interrupt Pin is set by D31IP.PIP */ + pci_write_config8(dev, INTR_LN, 0xff); + + /* Set timings */ + pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | + IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | + IDE_PPE0 | IDE_IE0 | IDE_TIME0); + pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | + IDE_SITRE | IDE_ISP_3_CLOCKS | + IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0); + + /* Sync DMA */ + pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0); + pci_write_config16(dev, IDE_SDMA_TIM, 0x0201); + + common_sata_init(dev, port_map); + } + + /* Set Gen3 Transmitter settings if needed */ + port_tx = fdtdec_get_int(blob, node, "intel,sata-port0-gen3-tx", 0); + if (port_tx) + pch_iobp_update(SATA_IOBP_SP0G3IR, 0, port_tx); + + port_tx = fdtdec_get_int(blob, node, "intel,sata-port1-gen3-tx", 0); + if (port_tx) + pch_iobp_update(SATA_IOBP_SP1G3IR, 0, port_tx); + + /* Additional Programming Requirements */ + sir_write(dev, 0x04, 0x00001600); + sir_write(dev, 0x28, 0xa0000033); + reg32 = sir_read(dev, 0x54); + reg32 &= 0xff000000; + reg32 |= 0x5555aa; + sir_write(dev, 0x54, reg32); + sir_write(dev, 0x64, 0xcccc8484); + reg32 = sir_read(dev, 0x68); + reg32 &= 0xffff0000; + reg32 |= 0xcccc; + sir_write(dev, 0x68, reg32); + reg32 = sir_read(dev, 0x78); + reg32 &= 0x0000ffff; + reg32 |= 0x88880000; + sir_write(dev, 0x78, reg32); + sir_write(dev, 0x84, 0x001c7000); + sir_write(dev, 0x88, 0x88338822); + sir_write(dev, 0xa0, 0x001c7000); + sir_write(dev, 0xc4, 0x0c0c0c0c); + sir_write(dev, 0xc8, 0x0c0c0c0c); + sir_write(dev, 0xd4, 0x10000000); + + pch_iobp_update(0xea004001, 0x3fffffff, 0xc0000000); + pch_iobp_update(0xea00408a, 0xfffffcff, 0x00000100); +} + +void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node) +{ + unsigned port_map; + const char *mode; + u16 map = 0; + + /* + * Set SATA controller mode early so the resource allocator can + * properly assign IO/Memory resources for the controller. + */ + mode = fdt_getprop(blob, node, "intel,sata-mode", NULL); + if (mode && !strcmp(mode, "ahci")) + map = 0x0060; + port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0); + + map |= (port_map ^ 0x3f) << 8; + pci_write_config16(dev, 0x90, map); +} diff --git a/arch/x86/cpu/ivybridge/usb_ehci.c b/arch/x86/cpu/ivybridge/usb_ehci.c new file mode 100644 index 0000000000..291c971a2f --- /dev/null +++ b/arch/x86/cpu/ivybridge/usb_ehci.c @@ -0,0 +1,29 @@ +/* + * From Coreboot + * Copyright (C) 2008-2009 coresystems GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <asm/arch/pch.h> + +void bd82x6x_usb_ehci_init(pci_dev_t dev) +{ + u32 reg32; + + /* Disable Wake on Disconnect in RMH */ + reg32 = readl(RCB_REG(0x35b0)); + reg32 |= 0x22; + writel(reg32, RCB_REG(0x35b0)); + + debug("EHCI: Setting up controller.. "); + reg32 = pci_read_config32(dev, PCI_COMMAND); + reg32 |= PCI_COMMAND_MASTER; + /* reg32 |= PCI_COMMAND_SERR; */ + pci_write_config32(dev, PCI_COMMAND, reg32); + + debug("done.\n"); +} diff --git a/arch/x86/cpu/ivybridge/usb_xhci.c b/arch/x86/cpu/ivybridge/usb_xhci.c new file mode 100644 index 0000000000..4a32a7eb31 --- /dev/null +++ b/arch/x86/cpu/ivybridge/usb_xhci.c @@ -0,0 +1,32 @@ +/* + * From Coreboot + * Copyright (C) 2008-2009 coresystems GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/pci.h> +#include <asm/arch/pch.h> + +void bd82x6x_usb_xhci_init(pci_dev_t dev) +{ + u32 reg32; + + debug("XHCI: Setting up controller.. "); + + /* lock overcurrent map */ + reg32 = pci_read_config32(dev, 0x44); + reg32 |= 1; + pci_write_config32(dev, 0x44, reg32); + + /* Enable clock gating */ + reg32 = pci_read_config32(dev, 0x40); + reg32 &= ~((1 << 20) | (1 << 21)); + reg32 |= (1 << 19) | (1 << 18) | (1 << 17); + reg32 |= (1 << 10) | (1 << 9) | (1 << 8); + reg32 |= (1 << 31); /* lock */ + pci_write_config32(dev, 0x40, reg32); + + debug("done.\n"); +} diff --git a/arch/x86/cpu/lapic.c b/arch/x86/cpu/lapic.c new file mode 100644 index 0000000000..4690603c75 --- /dev/null +++ b/arch/x86/cpu/lapic.c @@ -0,0 +1,57 @@ +/* + * From coreboot file of same name + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/msr.h> +#include <asm/io.h> +#include <asm/lapic.h> +#include <asm/post.h> + +void lapic_setup(void) +{ +#if NEED_LAPIC == 1 + /* Only Pentium Pro and later have those MSR stuff */ + debug("Setting up local apic: "); + + /* Enable the local apic */ + enable_lapic(); + + /* + * Set Task Priority to 'accept all'. + */ + lapic_write_around(LAPIC_TASKPRI, + lapic_read_around(LAPIC_TASKPRI) & ~LAPIC_TPRI_MASK); + + /* Put the local apic in virtual wire mode */ + lapic_write_around(LAPIC_SPIV, (lapic_read_around(LAPIC_SPIV) & + ~(LAPIC_VECTOR_MASK)) | LAPIC_SPIV_ENABLE); + lapic_write_around(LAPIC_LVT0, (lapic_read_around(LAPIC_LVT0) & + ~(LAPIC_LVT_MASKED | LAPIC_LVT_LEVEL_TRIGGER | + LAPIC_LVT_REMOTE_IRR | LAPIC_INPUT_POLARITY | + LAPIC_SEND_PENDING | LAPIC_LVT_RESERVED_1 | + LAPIC_DELIVERY_MODE_MASK)) | + (LAPIC_LVT_REMOTE_IRR | LAPIC_SEND_PENDING | + LAPIC_DELIVERY_MODE_EXTINT)); + lapic_write_around(LAPIC_LVT1, (lapic_read_around(LAPIC_LVT1) & + ~(LAPIC_LVT_MASKED | LAPIC_LVT_LEVEL_TRIGGER | + LAPIC_LVT_REMOTE_IRR | LAPIC_INPUT_POLARITY | + LAPIC_SEND_PENDING | LAPIC_LVT_RESERVED_1 | + LAPIC_DELIVERY_MODE_MASK)) | + (LAPIC_LVT_REMOTE_IRR | LAPIC_SEND_PENDING | + LAPIC_DELIVERY_MODE_NMI)); + + debug("apic_id: 0x%02lx, ", lapicid()); +#else /* !NEED_LLAPIC */ + /* Only Pentium Pro and later have those MSR stuff */ + debug("Disabling local apic: "); + disable_lapic(); +#endif /* !NEED_LAPIC */ + debug("done.\n"); + post_code(POST_LAPIC); +} diff --git a/arch/x86/cpu/pci.c b/arch/x86/cpu/pci.c index e3993880db..f3492c3851 100644 --- a/arch/x86/cpu/pci.c +++ b/arch/x86/cpu/pci.c @@ -33,6 +33,16 @@ int pci_early_init_hose(struct pci_controller **hosep) return 0; } +__weak int board_pci_pre_scan(struct pci_controller *hose) +{ + return 0; +} + +__weak int board_pci_post_scan(struct pci_controller *hose) +{ + return 0; +} + void pci_init_board(void) { struct pci_controller *hose = &x86_hose; @@ -44,7 +54,9 @@ void pci_init_board(void) pci_setup_type1(hose); pci_register_hose(hose); + board_pci_pre_scan(hose); hose->last_busno = pci_hose_scan(hose); + board_pci_post_scan(hose); } static struct pci_controller *get_hose(void) diff --git a/arch/x86/cpu/turbo.c b/arch/x86/cpu/turbo.c new file mode 100644 index 0000000000..254d0de0e4 --- /dev/null +++ b/arch/x86/cpu/turbo.c @@ -0,0 +1,98 @@ +/* + * From Coreboot file of the same name + * + * Copyright (C) 2011 The Chromium Authors. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/cpu.h> +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/turbo.h> + +#if CONFIG_CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED +static inline int get_global_turbo_state(void) +{ + return TURBO_UNKNOWN; +} + +static inline void set_global_turbo_state(int state) +{ +} +#else +static int g_turbo_state = TURBO_UNKNOWN; + +static inline int get_global_turbo_state(void) +{ + return g_turbo_state; +} + +static inline void set_global_turbo_state(int state) +{ + g_turbo_state = state; +} +#endif + +static const char *const turbo_state_desc[] = { + [TURBO_UNKNOWN] = "unknown", + [TURBO_UNAVAILABLE] = "unavailable", + [TURBO_DISABLED] = "available but hidden", + [TURBO_ENABLED] = "available and visible" +}; + +/* + * Determine the current state of Turbo and cache it for later. + * Turbo is a package level config so it does not need to be + * enabled on every core. + */ +int turbo_get_state(void) +{ + struct cpuid_result cpuid_regs; + int turbo_en, turbo_cap; + msr_t msr; + int turbo_state = get_global_turbo_state(); + + /* Return cached state if available */ + if (turbo_state != TURBO_UNKNOWN) + return turbo_state; + + cpuid_regs = cpuid(CPUID_LEAF_PM); + turbo_cap = !!(cpuid_regs.eax & PM_CAP_TURBO_MODE); + + msr = msr_read(MSR_IA32_MISC_ENABLES); + turbo_en = !(msr.hi & H_MISC_DISABLE_TURBO); + + if (!turbo_cap && turbo_en) { + /* Unavailable */ + turbo_state = TURBO_UNAVAILABLE; + } else if (!turbo_cap && !turbo_en) { + /* Available but disabled */ + turbo_state = TURBO_DISABLED; + } else if (turbo_cap && turbo_en) { + /* Available */ + turbo_state = TURBO_ENABLED; + } + + set_global_turbo_state(turbo_state); + debug("Turbo is %s\n", turbo_state_desc[turbo_state]); + return turbo_state; +} + +void turbo_enable(void) +{ + msr_t msr; + + /* Only possible if turbo is available but hidden */ + if (turbo_get_state() == TURBO_DISABLED) { + /* Clear Turbo Disable bit in Misc Enables */ + msr = msr_read(MSR_IA32_MISC_ENABLES); + msr.hi &= ~H_MISC_DISABLE_TURBO; + msr_write(MSR_IA32_MISC_ENABLES, msr); + + /* Update cached turbo state */ + set_global_turbo_state(TURBO_ENABLED); + debug("Turbo has been enabled\n"); + } +} diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds index f48bff54e1..b0d8531a60 100644 --- a/arch/x86/cpu/u-boot.lds +++ b/arch/x86/cpu/u-boot.lds @@ -44,7 +44,9 @@ SECTIONS . = ALIGN(4); __rel_dyn_start = .; - .rel.dyn : { *(.rel.dyn) } + .rel.dyn : { + *(.rel*) + } __rel_dyn_end = .; . = ALIGN(4); _end = .; @@ -64,15 +66,19 @@ SECTIONS /DISCARD/ : { *(.gnu*) } #ifdef CONFIG_X86_RESET_VECTOR - /* * The following expressions place the 16-bit Real-Mode code and * Reset Vector at the end of the Flash ROM */ - . = START_16; - .start16 : AT (CONFIG_SYS_TEXT_BASE + (CONFIG_SYS_MONITOR_LEN - RESET_SEG_SIZE + START_16)) { KEEP(*(.start16)); } + . = START_16 - RESET_SEG_START; + .start16 : AT (START_16) { + KEEP(*(.start16)); + } - . = RESET_VEC_LOC; - .resetvec : AT (CONFIG_SYS_TEXT_BASE + (CONFIG_SYS_MONITOR_LEN - RESET_SEG_SIZE + RESET_VEC_LOC)) { KEEP(*(.resetvec)); } + . = RESET_VEC_LOC - RESET_SEG_START; + .resetvec : AT (RESET_VEC_LOC) { + KEEP(*(.resetvec)); + } #endif + } diff --git a/arch/x86/dts/link.dts b/arch/x86/dts/link.dts index 932991604f..592af16f78 100644 --- a/arch/x86/dts/link.dts +++ b/arch/x86/dts/link.dts @@ -163,21 +163,51 @@ }; }; - lpc { - compatible = "intel,lpc"; - #address-cells = <1>; - #size-cells = <1>; - gen-dec = <0x800 0xfc 0x900 0xfc>; - cros-ec@200 { - compatible = "google,cros-ec"; - reg = <0x204 1 0x200 1 0x880 0x80>; + pci { + sata { + compatible = "intel,pantherpoint-ahci"; + intel,sata-mode = "ahci"; + intel,sata-port-map = <1>; + intel,sata-port0-gen3-tx = <0x00880a7f>; + }; + + gma { + compatible = "intel,gma"; + intel,dp_hotplug = <0 0 0x06>; + intel,panel-port-select = <1>; + intel,panel-power-cycle-delay = <6>; + intel,panel-power-up-delay = <2000>; + intel,panel-power-down-delay = <500>; + intel,panel-power-backlight-on-delay = <2000>; + intel,panel-power-backlight-off-delay = <2000>; + intel,cpu-backlight = <0x00000200>; + intel,pch-backlight = <0x04000000>; + }; - /* This describes the flash memory within the EC */ + lpc { + compatible = "intel,lpc"; #address-cells = <1>; #size-cells = <1>; - flash@8000000 { - reg = <0x08000000 0x20000>; - erase-value = <0xff>; + gen-dec = <0x800 0xfc 0x900 0xfc>; + intel,gen-dec = <0x800 0xfc 0x900 0xfc>; + intel,pirq-routing = <0x8b 0x8a 0x8b 0x8b + 0x80 0x80 0x80 0x80>; + intel,gpi-routing = <0 0 0 0 0 0 0 2 + 1 0 0 0 0 0 0 0>; + /* Enable EC SMI source */ + intel,alt-gp-smi-enable = <0x0100>; + + cros-ec@200 { + compatible = "google,cros-ec"; + reg = <0x204 1 0x200 1 0x880 0x80>; + + /* Describes the flash memory within the EC */ + #address-cells = <1>; + #size-cells = <1>; + flash@8000000 { + reg = <0x08000000 0x20000>; + erase-value = <0xff>; + }; }; }; }; diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h new file mode 100644 index 0000000000..4872b92860 --- /dev/null +++ b/arch/x86/include/asm/acpi.h @@ -0,0 +1,24 @@ +/* + * From coreboot + * + * Copyright (C) 2004 SUSE LINUX AG + * Copyright (C) 2004 Nick Barker + * Copyright (C) 2008-2009 coresystems GmbH + * (Written by Stefan Reinauer <stepan@coresystems.de>) + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __ASM_ACPI_H +#define __ASM_ACPI_H + +#define RSDP_SIG "RSD PTR " /* RSDT pointer signature */ +#define ACPI_TABLE_CREATOR "U-BootAC" /* Must be exactly 8 bytes long! */ +#define OEM_ID "U-Boot" /* Must be exactly 6 bytes long! */ +#define ASLC "U-Bo" /* Must be exactly 4 bytes long! */ + +/* 0 = S0, 1 = S1 ...*/ +int acpi_get_slp_type(void); +void apci_set_slp_type(int type); + +#endif diff --git a/arch/x86/include/asm/arch-coreboot/sysinfo.h b/arch/x86/include/asm/arch-coreboot/sysinfo.h index 8e4a61de7d..832c50aa63 100644 --- a/arch/x86/include/asm/arch-coreboot/sysinfo.h +++ b/arch/x86/include/asm/arch-coreboot/sysinfo.h @@ -10,7 +10,7 @@ #define _COREBOOT_SYSINFO_H #include <common.h> -#include <compiler.h> +#include <linux/compiler.h> #include <libfdt.h> #include <asm/arch/tables.h> diff --git a/arch/x86/include/asm/arch-coreboot/tables.h b/arch/x86/include/asm/arch-coreboot/tables.h index 0d02fe0592..e254484e75 100644 --- a/arch/x86/include/asm/arch-coreboot/tables.h +++ b/arch/x86/include/asm/arch-coreboot/tables.h @@ -9,7 +9,7 @@ #ifndef _COREBOOT_TABLES_H #define _COREBOOT_TABLES_H -#include <compiler.h> +#include <linux/compiler.h> struct cbuint64 { u32 lo; diff --git a/arch/x86/include/asm/arch-ivybridge/bd82x6x.h b/arch/x86/include/asm/arch-ivybridge/bd82x6x.h new file mode 100644 index 0000000000..e1d9a9b7b2 --- /dev/null +++ b/arch/x86/include/asm/arch-ivybridge/bd82x6x.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_BD82X6X_H +#define _ASM_ARCH_BD82X6X_H + +void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node); +void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node); +void bd82x6x_pci_init(pci_dev_t dev); +void bd82x6x_usb_ehci_init(pci_dev_t dev); +void bd82x6x_usb_xhci_init(pci_dev_t dev); +int bd82x6x_init_pci_devices(void); +int gma_func0_init(pci_dev_t dev, struct pci_controller *hose, + const void *blob, int node); +int bd82x6x_init(void); + +struct x86_cpu_priv; +int model_206ax_init(struct x86_cpu_priv *cpu); + +#endif diff --git a/arch/x86/include/asm/arch-ivybridge/model_206ax.h b/arch/x86/include/asm/arch-ivybridge/model_206ax.h index 8281d7a67b..7b4f2e790b 100644 --- a/arch/x86/include/asm/arch-ivybridge/model_206ax.h +++ b/arch/x86/include/asm/arch-ivybridge/model_206ax.h @@ -79,4 +79,8 @@ #define PSS_LATENCY_TRANSITION 10 #define PSS_LATENCY_BUSMASTER 10 +/* Configure power limits for turbo mode */ +void set_power_limits(u8 power_limit_1_time); +int cpu_config_tdp_levels(void); + #endif diff --git a/arch/x86/include/asm/arch-ivybridge/pch.h b/arch/x86/include/asm/arch-ivybridge/pch.h index c6efdb8565..21df083842 100644 --- a/arch/x86/include/asm/arch-ivybridge/pch.h +++ b/arch/x86/include/asm/arch-ivybridge/pch.h @@ -14,11 +14,41 @@ #include <pci.h> +/* PCH types */ +#define PCH_TYPE_CPT 0x1c /* CougarPoint */ +#define PCH_TYPE_PPT 0x1e /* IvyBridge */ + +/* PCH stepping values for LPC device */ +#define PCH_STEP_A0 0 +#define PCH_STEP_A1 1 +#define PCH_STEP_B0 2 +#define PCH_STEP_B1 3 +#define PCH_STEP_B2 4 +#define PCH_STEP_B3 5 #define DEFAULT_GPIOBASE 0x0480 #define DEFAULT_PMBASE 0x0500 #define SMBUS_IO_BASE 0x0400 +int pch_silicon_revision(void); +int pch_silicon_type(void); +int pch_silicon_supported(int type, int rev); +void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue); + +#define MAINBOARD_POWER_OFF 0 +#define MAINBOARD_POWER_ON 1 +#define MAINBOARD_POWER_KEEP 2 + +/* PCI Configuration Space (D30:F0): PCI2PCI */ +#define PSTS 0x06 +#define SMLT 0x1b +#define SECSTS 0x1e +#define INTR 0x3c +#define BCTRL 0x3e +#define SBR (1 << 6) +#define SEE (1 << 1) +#define PERE (1 << 0) + #define PCH_EHCI1_DEV PCI_BDF(0, 0x1d, 0) #define PCH_EHCI2_DEV PCI_BDF(0, 0x1a, 0) #define PCH_XHCI_DEV PCI_BDF(0, 0x14, 0) @@ -30,6 +60,35 @@ /* PCI Configuration Space (D31:F0): LPC */ #define PCH_LPC_DEV PCI_BDF(0, 0x1f, 0) +#define SERIRQ_CNTL 0x64 + +#define GEN_PMCON_1 0xa0 +#define GEN_PMCON_2 0xa2 +#define GEN_PMCON_3 0xa4 +#define ETR3 0xac +#define ETR3_CWORWRE (1 << 18) +#define ETR3_CF9GR (1 << 20) + +/* GEN_PMCON_3 bits */ +#define RTC_BATTERY_DEAD (1 << 2) +#define RTC_POWER_FAILED (1 << 1) +#define SLEEP_AFTER_POWER_FAIL (1 << 0) + +#define PMBASE 0x40 +#define ACPI_CNTL 0x44 +#define BIOS_CNTL 0xDC +#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */ +#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */ +#define GPIO_ROUT 0xb8 + +#define PIRQA_ROUT 0x60 +#define PIRQB_ROUT 0x61 +#define PIRQC_ROUT 0x62 +#define PIRQD_ROUT 0x63 +#define PIRQE_ROUT 0x68 +#define PIRQF_ROUT 0x69 +#define PIRQG_ROUT 0x6A +#define PIRQH_ROUT 0x6B #define GEN_PMCON_1 0xa0 #define GEN_PMCON_2 0xa2 @@ -63,6 +122,64 @@ #define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */ #define LPC_GENX_DEC(x) (0x84 + 4 * (x)) +/* PCI Configuration Space (D31:F1): IDE */ +#define PCH_IDE_DEV PCI_BDF(0, 0x1f, 1) +#define PCH_SATA_DEV PCI_BDF(0, 0x1f, 2) +#define PCH_SATA2_DEV PCI_BDF(0, 0x1f, 5) + +#define INTR_LN 0x3c +#define IDE_TIM_PRI 0x40 /* IDE timings, primary */ +#define IDE_DECODE_ENABLE (1 << 15) +#define IDE_SITRE (1 << 14) +#define IDE_ISP_5_CLOCKS (0 << 12) +#define IDE_ISP_4_CLOCKS (1 << 12) +#define IDE_ISP_3_CLOCKS (2 << 12) +#define IDE_RCT_4_CLOCKS (0 << 8) +#define IDE_RCT_3_CLOCKS (1 << 8) +#define IDE_RCT_2_CLOCKS (2 << 8) +#define IDE_RCT_1_CLOCKS (3 << 8) +#define IDE_DTE1 (1 << 7) +#define IDE_PPE1 (1 << 6) +#define IDE_IE1 (1 << 5) +#define IDE_TIME1 (1 << 4) +#define IDE_DTE0 (1 << 3) +#define IDE_PPE0 (1 << 2) +#define IDE_IE0 (1 << 1) +#define IDE_TIME0 (1 << 0) +#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ + +#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */ +#define IDE_SSDE1 (1 << 3) +#define IDE_SSDE0 (1 << 2) +#define IDE_PSDE1 (1 << 1) +#define IDE_PSDE0 (1 << 0) + +#define IDE_SDMA_TIM 0x4a + +#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */ +#define SIG_MODE_SEC_NORMAL (0 << 18) +#define SIG_MODE_SEC_TRISTATE (1 << 18) +#define SIG_MODE_SEC_DRIVELOW (2 << 18) +#define SIG_MODE_PRI_NORMAL (0 << 16) +#define SIG_MODE_PRI_TRISTATE (1 << 16) +#define SIG_MODE_PRI_DRIVELOW (2 << 16) +#define FAST_SCB1 (1 << 15) +#define FAST_SCB0 (1 << 14) +#define FAST_PCB1 (1 << 13) +#define FAST_PCB0 (1 << 12) +#define SCB1 (1 << 3) +#define SCB0 (1 << 2) +#define PCB1 (1 << 1) +#define PCB0 (1 << 0) + +#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ +#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ +#define SATA_SP 0xd0 /* Scratchpad */ + +/* SATA IOBP Registers */ +#define SATA_IOBP_SP0G3IR 0xea000151 +#define SATA_IOBP_SP1G3IR 0xea000051 + /* PCI Configuration Space (D31:F3): SMBus */ #define PCH_SMBUS_DEV PCI_BDF(0, 0x1f, 3) #define SMB_BASE 0x20 @@ -343,6 +460,9 @@ #define DMISCI_STS (1 << 9) #define TCO2_STS 0x66 +int lpc_init(struct pci_controller *hose, pci_dev_t dev); +void lpc_enable(pci_dev_t dev); + /** * lpc_early_init() - set up LPC serial ports and other early things * diff --git a/arch/x86/include/asm/arch-ivybridge/sandybridge.h b/arch/x86/include/asm/arch-ivybridge/sandybridge.h index 114ee19e24..cf7457f42d 100644 --- a/arch/x86/include/asm/arch-ivybridge/sandybridge.h +++ b/arch/x86/include/asm/arch-ivybridge/sandybridge.h @@ -97,11 +97,22 @@ /* * MCHBAR */ -#define MCHBAR_REG(reg) (DEFAULT_RCBA + (reg)) +#define MCHBAR_REG(reg) (DEFAULT_MCHBAR + (reg)) #define SSKPD 0x5d14 /* 16bit (scratchpad) */ #define BIOS_RESET_CPL 0x5da8 /* 8bit */ +/* + * DMIBAR + */ + +#define DMIBAR_REG(x) (DEFAULT_DMIBAR + x) + +int bridge_silicon_revision(void); + +void northbridge_enable(pci_dev_t dev); +void northbridge_init(pci_dev_t dev); + void report_platform_info(void); void sandybridge_early_init(int chipset_type); diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h index 73113f90a8..bc4033bed2 100644 --- a/arch/x86/include/asm/i8259.h +++ b/arch/x86/include/asm/i8259.h @@ -69,4 +69,6 @@ #define ICW4_AEOI 0x02 /* Automatic EOI Mode */ #define ICW4_PM 0x01 /* Microprocessor Mode */ +int i8259_init(void); + #endif diff --git a/arch/x86/include/asm/interrupt.h b/arch/x86/include/asm/interrupt.h index 3f46e0920a..25abde7be6 100644 --- a/arch/x86/include/asm/interrupt.h +++ b/arch/x86/include/asm/interrupt.h @@ -27,4 +27,15 @@ void specific_eoi(int irq); extern char exception_stack[]; +/** + * configure_irq_trigger() - Configure IRQ triggering + * + * Switch the given interrupt to be level / edge triggered + * + * @param int_num legacy interrupt number (3-7, 9-15) + * @param is_level_triggered true for level triggered interrupt, false for + * edge triggered interrupt + */ +void configure_irq_trigger(int int_num, bool is_level_triggered); + #endif diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index fcd9aa9857..e0b25619cd 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -1,7 +1,7 @@ #ifndef _ASM_IO_H #define _ASM_IO_H -#include <compiler.h> +#include <linux/compiler.h> /* * This file contains the definitions for the x86 IO instructions diff --git a/arch/x86/include/asm/ioapic.h b/arch/x86/include/asm/ioapic.h new file mode 100644 index 0000000000..699160f9f7 --- /dev/null +++ b/arch/x86/include/asm/ioapic.h @@ -0,0 +1,38 @@ +/* + * From coreboot file of the same name + * + * Copyright (C) 2010 coresystems GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __ASM_IOAPIC_H +#define __ASM_IOAPIC_H + +#define IO_APIC_ADDR 0xfec00000 +#define IO_APIC_INDEX IO_APIC_ADDR +#define IO_APIC_DATA (IO_APIC_ADDR + 0x10) +#define IO_APIC_INTERRUPTS 24 + +#define ALL (0xff << 24) +#define NONE 0 +#define DISABLED (1 << 16) +#define ENABLED (0 << 16) +#define TRIGGER_EDGE (0 << 15) +#define TRIGGER_LEVEL (1 << 15) +#define POLARITY_HIGH (0 << 13) +#define POLARITY_LOW (1 << 13) +#define PHYSICAL_DEST (0 << 11) +#define LOGICAL_DEST (1 << 11) +#define ExtINT (7 << 8) +#define NMI (4 << 8) +#define SMI (2 << 8) +#define INT (1 << 8) + +u32 io_apic_read(u32 ioapic_base, u32 reg); +void io_apic_write(u32 ioapic_base, u32 reg, u32 value); +void set_ioapic_id(u32 ioapic_base, u8 ioapic_id); +void setup_ioapic(u32 ioapic_base, u8 ioapic_id); +void clear_ioapic(u32 ioapic_base); + +#endif diff --git a/arch/x86/include/asm/lapic.h b/arch/x86/include/asm/lapic.h index 948e643a7e..0a7f443195 100644 --- a/arch/x86/include/asm/lapic.h +++ b/arch/x86/include/asm/lapic.h @@ -14,6 +14,13 @@ #include <asm/msr.h> #include <asm/processor.h> +/* See if I need to initialize the local apic */ +#if CONFIG_SMP || CONFIG_IOAPIC +# define NEED_LAPIC 1 +#else +# define NEED_LAPIC 0 +#endif + static inline __attribute__((always_inline)) unsigned long lapic_read(unsigned long reg) { @@ -37,8 +44,9 @@ static inline void enable_lapic(void) msr = msr_read(LAPIC_BASE_MSR); msr.hi &= 0xffffff00; - msr.lo &= 0x000007ff; - msr.lo |= LAPIC_DEFAULT_BASE | (1 << 11); + msr.lo |= LAPIC_BASE_MSR_ENABLE; + msr.lo &= ~LAPIC_BASE_MSR_ADDR_MASK; + msr.lo |= LAPIC_DEFAULT_BASE; msr_write(LAPIC_BASE_MSR, msr); } @@ -56,4 +64,116 @@ static inline __attribute__((always_inline)) unsigned long lapicid(void) return lapic_read(LAPIC_ID) >> 24; } +#if !CONFIG_AP_IN_SIPI_WAIT +/* If we need to go back to sipi wait, we use the long non-inlined version of + * this function in lapic_cpu_init.c + */ +static inline __attribute__((always_inline)) void stop_this_cpu(void) +{ + /* Called by an AP when it is ready to halt and wait for a new task */ + for (;;) + cpu_hlt(); +} +#else +void stop_this_cpu(void); +#endif + +#define xchg(ptr, v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v), (ptr), \ + sizeof(*(ptr)))) + +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((struct __xchg_dummy *)(x)) + +/* + * Note: no "lock" prefix even on SMP: xchg always implies lock anyway + * Note 2: xchg has side effect, so that attribute volatile is necessary, + * but generally the primitive is invalid, *ptr is output argument. --ANK + */ +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, + int size) +{ + switch (size) { + case 1: + __asm__ __volatile__("xchgb %b0,%1" + : "=q" (x) + : "m" (*__xg(ptr)), "0" (x) + : "memory"); + break; + case 2: + __asm__ __volatile__("xchgw %w0,%1" + : "=r" (x) + : "m" (*__xg(ptr)), "0" (x) + : "memory"); + break; + case 4: + __asm__ __volatile__("xchgl %0,%1" + : "=r" (x) + : "m" (*__xg(ptr)), "0" (x) + : "memory"); + break; + } + + return x; +} + +static inline void lapic_write_atomic(unsigned long reg, unsigned long v) +{ + (void)xchg((volatile unsigned long *)(LAPIC_DEFAULT_BASE + reg), v); +} + + +#ifdef X86_GOOD_APIC +# define FORCE_READ_AROUND_WRITE 0 +# define lapic_read_around(x) lapic_read(x) +# define lapic_write_around(x, y) lapic_write((x), (y)) +#else +# define FORCE_READ_AROUND_WRITE 1 +# define lapic_read_around(x) lapic_read(x) +# define lapic_write_around(x, y) lapic_write_atomic((x), (y)) +#endif + +static inline int lapic_remote_read(int apicid, int reg, unsigned long *pvalue) +{ + int timeout; + unsigned long status; + int result; + lapic_wait_icr_idle(); + lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid)); + lapic_write_around(LAPIC_ICR, LAPIC_DM_REMRD | (reg >> 4)); + timeout = 0; + do { + status = lapic_read(LAPIC_ICR) & LAPIC_ICR_RR_MASK; + } while (status == LAPIC_ICR_RR_INPROG && timeout++ < 1000); + + result = -1; + if (status == LAPIC_ICR_RR_VALID) { + *pvalue = lapic_read(LAPIC_RRR); + result = 0; + } + return result; +} + + +void lapic_setup(void); + +#if CONFIG_SMP +struct device; +int start_cpu(struct device *cpu); +#endif /* CONFIG_SMP */ + +int boot_cpu(void); + +/** + * struct x86_cpu_priv - Information about a single CPU + * + * @apic_id: Advanced Programmable Interrupt Controller Identifier, which is + * just a number representing the CPU core + * + * TODO: Move this to driver model once lifecycle is understood + */ +struct x86_cpu_priv { + int apic_id; + int start_err; +}; + #endif diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 6027d593ff..2cbb270089 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -326,6 +326,8 @@ #define MSR_AMD_PERF_STATUS 0xc0010063 #define MSR_AMD_PERF_CTL 0xc0010062 +#define MSR_PMG_CST_CONFIG_CTL 0x000000e2 +#define MSR_PMG_IO_CAPTURE_ADR 0x000000e4 #define MSR_IA32_MPERF 0x000000e7 #define MSR_IA32_APERF 0x000000e8 diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index df4398378c..1955a752b9 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -229,17 +229,6 @@ do { \ struct msr *msrs_alloc(void); void msrs_free(struct msr *msrs); -#ifdef CONFIG_SMP -int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h); -int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h); -void rdmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs); -void wrmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs); -int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h); -int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h); -int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]); -int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]); - -#endif /* CONFIG_SMP */ #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ #endif /* _ASM_X86_MSR_H */ diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index 98817aa8a2..ac1a808307 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -34,6 +34,9 @@ void board_pci_setup_hose(struct pci_controller *hose); */ int pci_early_init_hose(struct pci_controller **hosep); +int board_pci_pre_scan(struct pci_controller *hose); +int board_pci_post_scan(struct pci_controller *hose); + /* * Simple PCI access routines - these work from either the early PCI hose * or the 'real' one, created after U-Boot has memory available diff --git a/arch/x86/include/asm/post.h b/arch/x86/include/asm/post.h index ce68839dec..6d2ae5dfe7 100644 --- a/arch/x86/include/asm/post.h +++ b/arch/x86/include/asm/post.h @@ -30,6 +30,7 @@ #define POST_PRE_MRC 0x2e #define POST_MRC 0x2f #define POST_DRAM 0x2f +#define POST_LAPIC 0x30 #define POST_RAM_FAILURE 0xea diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index b9317cb34b..3e26202aa5 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -8,25 +8,18 @@ #ifndef __ASM_PROCESSOR_H_ #define __ASM_PROCESSOR_H_ 1 -#define X86_GDT_ENTRY_SIZE 8 - -#ifndef __ASSEMBLY__ - -enum { - X86_GDT_ENTRY_NULL = 0, - X86_GDT_ENTRY_UNUSED, - X86_GDT_ENTRY_32BIT_CS, - X86_GDT_ENTRY_32BIT_DS, - X86_GDT_ENTRY_32BIT_FS, - X86_GDT_ENTRY_16BIT_CS, - X86_GDT_ENTRY_16BIT_DS, - X86_GDT_NUM_ENTRIES -}; -#else -/* NOTE: If the above enum is modified, this define must be checked */ -#define X86_GDT_ENTRY_32BIT_DS 3 -#define X86_GDT_NUM_ENTRIES 7 -#endif +#define X86_GDT_ENTRY_SIZE 8 + +#define X86_GDT_ENTRY_NULL 0 +#define X86_GDT_ENTRY_UNUSED 1 +#define X86_GDT_ENTRY_32BIT_CS 2 +#define X86_GDT_ENTRY_32BIT_DS 3 +#define X86_GDT_ENTRY_32BIT_FS 4 +#define X86_GDT_ENTRY_16BIT_CS 5 +#define X86_GDT_ENTRY_16BIT_DS 6 +#define X86_GDT_ENTRY_16BIT_FLAT_CS 7 +#define X86_GDT_ENTRY_16BIT_FLAT_DS 8 +#define X86_GDT_NUM_ENTRIES 9 #define X86_GDT_SIZE (X86_GDT_NUM_ENTRIES * X86_GDT_ENTRY_SIZE) diff --git a/arch/x86/include/asm/speedstep.h b/arch/x86/include/asm/speedstep.h new file mode 100644 index 0000000000..b938b86ba8 --- /dev/null +++ b/arch/x86/include/asm/speedstep.h @@ -0,0 +1,89 @@ +/* + * From Coreboot file of same name + * + * Copyright (C) 2007-2009 coresystems GmbH + * 2012 secunet Security Networks AG + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _ASM_SPEEDSTEP_H +#define _ASM_SPEEDSTEP_H + +/* Magic value used to locate speedstep configuration in the device tree */ +#define SPEEDSTEP_APIC_MAGIC 0xACAC + +/* MWAIT coordination I/O base address. This must match + * the \_PR_.CPU0 PM base address. + */ +#define PMB0_BASE 0x510 + +/* PMB1: I/O port that triggers SMI once cores are in the same state. + * See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4] + */ +#define PMB1_BASE 0x800 + +struct sst_state { + uint8_t dynfsb:1; /* whether this is SLFM */ + uint8_t nonint:1; /* add .5 to ratio */ + uint8_t ratio:6; + uint8_t vid; + uint8_t is_turbo; + uint8_t is_slfm; + uint32_t power; +}; +#define SPEEDSTEP_RATIO_SHIFT 8 +#define SPEEDSTEP_RATIO_DYNFSB_SHIFT (7 + SPEEDSTEP_RATIO_SHIFT) +#define SPEEDSTEP_RATIO_DYNFSB (1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT) +#define SPEEDSTEP_RATIO_NONINT_SHIFT (6 + SPEEDSTEP_RATIO_SHIFT) +#define SPEEDSTEP_RATIO_NONINT (1 << SPEEDSTEP_RATIO_NONINT_SHIFT) +#define SPEEDSTEP_RATIO_VALUE_MASK (0x1f << SPEEDSTEP_RATIO_SHIFT) +#define SPEEDSTEP_VID_MASK 0x3f +#define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((struct sst_state){ \ + 0, /* dynfsb won't be read. */ \ + ((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0, \ + (((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK) \ + >> SPEEDSTEP_RATIO_SHIFT), \ + (val & mask) & SPEEDSTEP_VID_MASK, \ + 0, /* not turbo by default */ \ + 0, /* not slfm by default */ \ + 0 /* power is hardcoded in software. */ \ + }) +#define SPEEDSTEP_ENCODE_STATE(state) ( \ + ((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) | \ + ((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) | \ + ((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) | \ + ((uint16_t)(state).vid & SPEEDSTEP_VID_MASK)) +#define SPEEDSTEP_DOUBLE_RATIO(state) ( \ + ((uint8_t)(state).ratio * 2) + (state).nonint) + +struct sst_params { + struct sst_state slfm; + struct sst_state min; + struct sst_state max; + struct sst_state turbo; +}; + +/* Looking at core2's spec, the highest normal bus ratio for an eist enabled + processor is 14, the lowest is always 6. This makes 5 states with the + minimal step width of 2. With turbo mode and super LFM we have at most 7. */ +#define SPEEDSTEP_MAX_NORMAL_STATES 5 +#define SPEEDSTEP_MAX_STATES (SPEEDSTEP_MAX_NORMAL_STATES + 2) +struct sst_table { + /* Table of p-states for EMTTM and ACPI by decreasing performance. */ + struct sst_state states[SPEEDSTEP_MAX_STATES]; + int num_states; +}; + +void speedstep_gen_pstates(struct sst_table *); + +#define SPEEDSTEP_MAX_POWER_YONAH 31000 +#define SPEEDSTEP_MIN_POWER_YONAH 13100 +#define SPEEDSTEP_MAX_POWER_MEROM 35000 +#define SPEEDSTEP_MIN_POWER_MEROM 25000 +#define SPEEDSTEP_SLFM_POWER_MEROM 12000 +#define SPEEDSTEP_MAX_POWER_PENRYN 35000 +#define SPEEDSTEP_MIN_POWER_PENRYN 15000 +#define SPEEDSTEP_SLFM_POWER_PENRYN 12000 + +#endif diff --git a/arch/x86/include/asm/turbo.h b/arch/x86/include/asm/turbo.h new file mode 100644 index 0000000000..bb0d4b4354 --- /dev/null +++ b/arch/x86/include/asm/turbo.h @@ -0,0 +1,31 @@ +/* + * From coreboot file of the same name + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _ASM_TURBO_H +#define _ASM_TURBO_H + +#define CPUID_LEAF_PM 6 +#define PM_CAP_TURBO_MODE (1 << 1) + +#define MSR_IA32_MISC_ENABLES 0x1a0 +#define H_MISC_DISABLE_TURBO (1 << 6) + +enum { + TURBO_UNKNOWN, + TURBO_UNAVAILABLE, + TURBO_DISABLED, + TURBO_ENABLED, +}; + +/* Return current turbo state */ +int turbo_get_state(void); + +/* Enable turbo */ +void turbo_enable(void); + +#endif diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h index 98217dd615..36145cb0a8 100644 --- a/arch/x86/include/asm/u-boot-x86.h +++ b/arch/x86/include/asm/u-boot-x86.h @@ -10,8 +10,6 @@ /* cpu/.../cpu.c */ int arch_cpu_init(void); -int x86_cpu_init_r(void); -int cpu_init_r(void); int x86_cpu_init_f(void); int cpu_init_f(void); void init_gd(gd_t *id, u64 *gdt_addr); diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index e146e646cd..55de788500 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -5,6 +5,9 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-y += bios.o +obj-y += bios_asm.o +obj-y += bios_interrupts.o obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-y += cmd_boot.o obj-y += gcc.o diff --git a/arch/x86/lib/bios.c b/arch/x86/lib/bios.c new file mode 100644 index 0000000000..298fca632c --- /dev/null +++ b/arch/x86/lib/bios.c @@ -0,0 +1,347 @@ +/* + * From Coreboot file device/oprom/realmode/x86.c + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2009-2010 coresystems GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ +#include <common.h> +#include <bios_emul.h> +#include <vbe.h> +#include <asm/cache.h> +#include <asm/processor.h> +#include <asm/i8259.h> +#include <asm/io.h> +#include <asm/post.h> +#include "bios.h" + +/* Interrupt handlers for each interrupt the ROM can call */ +static int (*int_handler[256])(void); + +/* to have a common register file for interrupt handlers */ +X86EMU_sysEnv _X86EMU_env; + +asmlinkage void (*realmode_call)(u32 addr, u32 eax, u32 ebx, u32 ecx, u32 edx, + u32 esi, u32 edi); + +asmlinkage void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, + u32 edx, u32 esi, u32 edi); + +static void setup_realmode_code(void) +{ + memcpy((void *)REALMODE_BASE, &asm_realmode_code, + asm_realmode_code_size); + + /* Ensure the global pointers are relocated properly. */ + realmode_call = PTR_TO_REAL_MODE(asm_realmode_call); + realmode_interrupt = PTR_TO_REAL_MODE(__realmode_interrupt); + + debug("Real mode stub @%x: %d bytes\n", REALMODE_BASE, + asm_realmode_code_size); +} + +static void setup_rombios(void) +{ + const char date[] = "06/11/99"; + memcpy((void *)0xffff5, &date, 8); + + const char ident[] = "PCI_ISA"; + memcpy((void *)0xfffd9, &ident, 7); + + /* system model: IBM-AT */ + writeb(0xfc, 0xffffe); +} + +static int int_exception_handler(void) +{ + /* compatibility shim */ + struct eregs reg_info = { + .eax = M.x86.R_EAX, + .ecx = M.x86.R_ECX, + .edx = M.x86.R_EDX, + .ebx = M.x86.R_EBX, + .esp = M.x86.R_ESP, + .ebp = M.x86.R_EBP, + .esi = M.x86.R_ESI, + .edi = M.x86.R_EDI, + .vector = M.x86.intno, + .error_code = 0, + .eip = M.x86.R_EIP, + .cs = M.x86.R_CS, + .eflags = M.x86.R_EFLG + }; + struct eregs *regs = ®_info; + + debug("Oops, exception %d while executing option rom\n", regs->vector); + cpu_hlt(); + + return 0; +} + +static int int_unknown_handler(void) +{ + debug("Unsupported software interrupt #0x%x eax 0x%x\n", + M.x86.intno, M.x86.R_EAX); + + return -1; +} + +/* setup interrupt handlers for mainboard */ +void bios_set_interrupt_handler(int intnum, int (*int_func)(void)) +{ + int_handler[intnum] = int_func; +} + +static void setup_interrupt_handlers(void) +{ + int i; + + /* + * The first 16 int_handler functions are not BIOS services, + * but the CPU-generated exceptions ("hardware interrupts") + */ + for (i = 0; i < 0x10; i++) + int_handler[i] = &int_exception_handler; + + /* Mark all other int_handler calls as unknown first */ + for (i = 0x10; i < 0x100; i++) { + /* Skip if bios_set_interrupt_handler() isn't called first */ + if (int_handler[i]) + continue; + + /* + * Now set the default functions that are actually needed + * to initialize the option roms. The board may override + * these with bios_set_interrupt_handler() + */ + switch (i) { + case 0x10: + int_handler[0x10] = &int10_handler; + break; + case 0x12: + int_handler[0x12] = &int12_handler; + break; + case 0x16: + int_handler[0x16] = &int16_handler; + break; + case 0x1a: + int_handler[0x1a] = &int1a_handler; + break; + default: + int_handler[i] = &int_unknown_handler; + break; + } + } +} + +static void write_idt_stub(void *target, u8 intnum) +{ + unsigned char *codeptr; + + codeptr = (unsigned char *)target; + memcpy(codeptr, &__idt_handler, __idt_handler_size); + codeptr[3] = intnum; /* modify int# in the code stub. */ +} + +static void setup_realmode_idt(void) +{ + struct realmode_idt *idts = NULL; + int i; + + /* + * Copy IDT stub code for each interrupt. This might seem wasteful + * but it is really simple + */ + for (i = 0; i < 256; i++) { + idts[i].cs = 0; + idts[i].offset = 0x1000 + (i * __idt_handler_size); + write_idt_stub((void *)((u32)idts[i].offset), i); + } + + /* + * Many option ROMs use the hard coded interrupt entry points in the + * system bios. So install them at the known locations. + */ + + /* int42 is the relocated int10 */ + write_idt_stub((void *)0xff065, 0x42); + /* BIOS Int 11 Handler F000:F84D */ + write_idt_stub((void *)0xff84d, 0x11); + /* BIOS Int 12 Handler F000:F841 */ + write_idt_stub((void *)0xff841, 0x12); + /* BIOS Int 13 Handler F000:EC59 */ + write_idt_stub((void *)0xfec59, 0x13); + /* BIOS Int 14 Handler F000:E739 */ + write_idt_stub((void *)0xfe739, 0x14); + /* BIOS Int 15 Handler F000:F859 */ + write_idt_stub((void *)0xff859, 0x15); + /* BIOS Int 16 Handler F000:E82E */ + write_idt_stub((void *)0xfe82e, 0x16); + /* BIOS Int 17 Handler F000:EFD2 */ + write_idt_stub((void *)0xfefd2, 0x17); + /* ROM BIOS Int 1A Handler F000:FE6E */ + write_idt_stub((void *)0xffe6e, 0x1a); +} + +static u8 vbe_get_mode_info(struct vbe_mode_info *mi) +{ + u16 buffer_seg; + u16 buffer_adr; + char *buffer; + + debug("VBE: Getting information about VESA mode %04x\n", + mi->video_mode); + buffer = PTR_TO_REAL_MODE(asm_realmode_buffer); + buffer_seg = (((unsigned long)buffer) >> 4) & 0xff00; + buffer_adr = ((unsigned long)buffer) & 0xffff; + + realmode_interrupt(0x10, VESA_GET_MODE_INFO, 0x0000, mi->video_mode, + 0x0000, buffer_seg, buffer_adr); + memcpy(mi->mode_info_block, buffer, sizeof(struct vbe_mode_info)); + mi->valid = true; + + return 0; +} + +static u8 vbe_set_mode(struct vbe_mode_info *mi) +{ + debug("VBE: Setting VESA mode %#04x\n", mi->video_mode); + /* request linear framebuffer mode */ + mi->video_mode |= (1 << 14); + /* request clearing of framebuffer */ + mi->video_mode &= ~(1 << 15); + realmode_interrupt(0x10, VESA_SET_MODE, mi->video_mode, + 0x0000, 0x0000, 0x0000, 0x0000); + + return 0; +} + +static void vbe_set_graphics(int vesa_mode, struct vbe_mode_info *mode_info) +{ + unsigned char *framebuffer; + + mode_info->video_mode = (1 << 14) | vesa_mode; + vbe_get_mode_info(mode_info); + + framebuffer = (unsigned char *)mode_info->vesa.phys_base_ptr; + debug("VBE: resolution: %dx%d@%d\n", + le16_to_cpu(mode_info->vesa.x_resolution), + le16_to_cpu(mode_info->vesa.y_resolution), + mode_info->vesa.bits_per_pixel); + debug("VBE: framebuffer: %p\n", framebuffer); + if (!framebuffer) { + debug("VBE: Mode does not support linear framebuffer\n"); + return; + } + + vbe_set_mode(mode_info); +} + +void bios_run_on_x86(pci_dev_t pcidev, unsigned long addr, int vesa_mode, + struct vbe_mode_info *mode_info) +{ + u32 num_dev; + + num_dev = PCI_BUS(pcidev) << 8 | PCI_DEV(pcidev) << 3 | + PCI_FUNC(pcidev); + + /* Needed to avoid exceptions in some ROMs */ + interrupt_init(); + + /* Set up some legacy information in the F segment */ + setup_rombios(); + + /* Set up C interrupt handlers */ + setup_interrupt_handlers(); + + /* Set up real-mode IDT */ + setup_realmode_idt(); + + /* Make sure the code is placed. */ + setup_realmode_code(); + + disable_caches(); + debug("Calling Option ROM at %lx, pci device %#x...", addr, num_dev); + + /* Option ROM entry point is at OPROM start + 3 */ + realmode_call(addr + 0x0003, num_dev, 0xffff, 0x0000, 0xffff, 0x0, + 0x0); + debug("done\n"); + + if (vesa_mode != -1) + vbe_set_graphics(vesa_mode, mode_info); +} + +asmlinkage int interrupt_handler(u32 intnumber, u32 gsfs, u32 dses, + u32 edi, u32 esi, u32 ebp, u32 esp, + u32 ebx, u32 edx, u32 ecx, u32 eax, + u32 cs_ip, u16 stackflags) +{ + u32 ip; + u32 cs; + u32 flags; + int ret = 0; + + ip = cs_ip & 0xffff; + cs = cs_ip >> 16; + flags = stackflags; + +#ifdef CONFIG_REALMODE_DEBUG + debug("oprom: INT# 0x%x\n", intnumber); + debug("oprom: eax: %08x ebx: %08x ecx: %08x edx: %08x\n", + eax, ebx, ecx, edx); + debug("oprom: ebp: %08x esp: %08x edi: %08x esi: %08x\n", + ebp, esp, edi, esi); + debug("oprom: ip: %04x cs: %04x flags: %08x\n", + ip, cs, flags); + debug("oprom: stackflags = %04x\n", stackflags); +#endif + + /* + * Fetch arguments from the stack and put them to a place + * suitable for the interrupt handlers + */ + M.x86.R_EAX = eax; + M.x86.R_ECX = ecx; + M.x86.R_EDX = edx; + M.x86.R_EBX = ebx; + M.x86.R_ESP = esp; + M.x86.R_EBP = ebp; + M.x86.R_ESI = esi; + M.x86.R_EDI = edi; + M.x86.intno = intnumber; + M.x86.R_EIP = ip; + M.x86.R_CS = cs; + M.x86.R_EFLG = flags; + + /* Call the interrupt handler for this interrupt number */ + ret = int_handler[intnumber](); + + /* + * This code is quite strange... + * + * Put registers back on the stack. The assembler code will pop them + * later. We force (volatile!) changing the values of the parameters + * of this function. We know that they stay alive on the stack after + * we leave this function. + */ + *(volatile u32 *)&eax = M.x86.R_EAX; + *(volatile u32 *)&ecx = M.x86.R_ECX; + *(volatile u32 *)&edx = M.x86.R_EDX; + *(volatile u32 *)&ebx = M.x86.R_EBX; + *(volatile u32 *)&esi = M.x86.R_ESI; + *(volatile u32 *)&edi = M.x86.R_EDI; + flags = M.x86.R_EFLG; + + /* Pass success or error back to our caller via the CARRY flag */ + if (ret) { + flags &= ~1; /* no error: clear carry */ + } else { + debug("int%02x call returned error\n", intnumber); + flags |= 1; /* error: set carry */ + } + *(volatile u16 *)&stackflags = flags; + + return ret; +} diff --git a/arch/x86/lib/bios.h b/arch/x86/lib/bios.h new file mode 100644 index 0000000000..8491b4acdd --- /dev/null +++ b/arch/x86/lib/bios.h @@ -0,0 +1,98 @@ +/* + * From Coreboot file device/oprom/realmode/x86.h + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2009-2010 coresystems GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _X86_LIB_BIOS_H +#define _X86_LIB_BIOS_H + +#define REALMODE_BASE 0x600 + +#ifdef __ASSEMBLY__ + +#define PTR_TO_REAL_MODE(x) (x - asm_realmode_code + REALMODE_BASE) + +#else + +/* Convert a symbol address to our real mode area */ +#define PTR_TO_REAL_MODE(sym)\ + (void *)(REALMODE_BASE + ((char *)&(sym) - (char *)&asm_realmode_code)) + +/* + * The following symbols cannot be used directly. They need to be fixed up + * to point to the correct address location after the code has been copied + * to REALMODE_BASE. Absolute symbols are not used because those symbols are + * relocated by U-Boot. + */ +extern unsigned char asm_realmode_call, __realmode_interrupt; +extern unsigned char asm_realmode_buffer; + +#define DOWNTO8(A) \ + union { \ + struct { \ + union { \ + struct { \ + uint8_t A##l; \ + uint8_t A##h; \ + } __packed; \ + uint16_t A##x; \ + } __packed; \ + uint16_t h##A##x; \ + } __packed; \ + uint32_t e##A##x; \ + } __packed; + +#define DOWNTO16(A) \ + union { \ + struct { \ + uint16_t A; \ + uint16_t h##A; \ + } __packed; \ + uint32_t e##A; \ + } __packed; + +struct eregs { + DOWNTO8(a); + DOWNTO8(c); + DOWNTO8(d); + DOWNTO8(b); + DOWNTO16(sp); + DOWNTO16(bp); + DOWNTO16(si); + DOWNTO16(di); + uint32_t vector; + uint32_t error_code; + uint32_t eip; + uint32_t cs; + uint32_t eflags; +}; + +struct realmode_idt { + u16 offset, cs; +}; + +void x86_exception(struct eregs *info); + +/* From x86_asm.S */ +extern unsigned char __idt_handler; +extern unsigned int __idt_handler_size; +extern unsigned char asm_realmode_code; +extern unsigned int asm_realmode_code_size; + +asmlinkage void (*realmode_call)(u32 addr, u32 eax, u32 ebx, u32 ecx, u32 edx, + u32 esi, u32 edi); + +asmlinkage void (*realmode_interrupt)(u32 intno, u32 eax, u32 ebx, u32 ecx, + u32 edx, u32 esi, u32 edi); + +int int10_handler(void); +int int12_handler(void); +int int16_handler(void); +int int1a_handler(void); +#endif /*__ASSEMBLY__ */ + +#endif diff --git a/arch/x86/lib/bios_asm.S b/arch/x86/lib/bios_asm.S new file mode 100644 index 0000000000..4faa70e314 --- /dev/null +++ b/arch/x86/lib/bios_asm.S @@ -0,0 +1,281 @@ +/* + * From coreboot x86_asm.S, cleaned up substantially + * + * Copyright (C) 2009-2010 coresystems GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <asm/processor.h> +#include <asm/processor-flags.h> +#include "bios.h" + +#define SEG(segment) $segment * X86_GDT_ENTRY_SIZE + +/* + * This is the interrupt handler stub code. It gets copied to the IDT and + * to some fixed addresses in the F segment. Before the code can used, + * it gets patched up by the C function copying it: byte 3 (the $0 in + * movb $0, %al) is overwritten with the interrupt numbers. + */ + + .code16 + .globl __idt_handler +__idt_handler: + pushal + movb $0, %al /* This instruction gets modified */ + ljmp $0, $__interrupt_handler_16bit + .globl __idt_handler_size +__idt_handler_size: + .long . - __idt_handler + +.macro setup_registers + /* initial register values */ + movl 44(%ebp), %eax + movl %eax, __registers + 0 /* eax */ + movl 48(%ebp), %eax + movl %eax, __registers + 4 /* ebx */ + movl 52(%ebp), %eax + movl %eax, __registers + 8 /* ecx */ + movl 56(%ebp), %eax + movl %eax, __registers + 12 /* edx */ + movl 60(%ebp), %eax + movl %eax, __registers + 16 /* esi */ + movl 64(%ebp), %eax + movl %eax, __registers + 20 /* edi */ +.endm + +.macro enter_real_mode + /* Activate the right segment descriptor real mode. */ + ljmp SEG(X86_GDT_ENTRY_16BIT_CS), $PTR_TO_REAL_MODE(1f) +1: +.code16 + /* + * Load the segment registers with properly configured segment + * descriptors. They will retain these configurations (limits, + * writability, etc.) once protected mode is turned off. + */ + mov SEG(X86_GDT_ENTRY_16BIT_DS), %ax + mov %ax, %ds + mov %ax, %es + mov %ax, %fs + mov %ax, %gs + mov %ax, %ss + + /* Turn off protection */ + movl %cr0, %eax + andl $~X86_CR0_PE, %eax + movl %eax, %cr0 + + /* Now really going into real mode */ + ljmp $0, $PTR_TO_REAL_MODE(1f) +1: + /* + * Set up a stack: Put the stack at the end of page zero. That way + * we can easily share it between real and protected, since the + * 16-bit ESP at segment 0 will work for any case. + */ + mov $0x0, %ax + mov %ax, %ss + + /* Load 16 bit IDT */ + xor %ax, %ax + mov %ax, %ds + lidt __realmode_idt + +.endm + +.macro prepare_for_irom + movl $0x1000, %eax + movl %eax, %esp + + /* Initialise registers for option rom lcall */ + movl __registers + 0, %eax + movl __registers + 4, %ebx + movl __registers + 8, %ecx + movl __registers + 12, %edx + movl __registers + 16, %esi + movl __registers + 20, %edi + + /* Set all segments to 0x0000, ds to 0x0040 */ + push %ax + xor %ax, %ax + mov %ax, %es + mov %ax, %fs + mov %ax, %gs + mov SEG(X86_GDT_ENTRY_16BIT_FLAT_DS), %ax + mov %ax, %ds + pop %ax + +.endm + +.macro enter_protected_mode + /* Go back to protected mode */ + movl %cr0, %eax + orl $X86_CR0_PE, %eax + movl %eax, %cr0 + + /* Now that we are in protected mode jump to a 32 bit code segment */ + data32 ljmp SEG(X86_GDT_ENTRY_32BIT_CS), $PTR_TO_REAL_MODE(1f) +1: + .code32 + mov SEG(X86_GDT_ENTRY_32BIT_DS), %ax + mov %ax, %ds + mov %ax, %es + mov %ax, %gs + mov %ax, %ss + mov SEG(X86_GDT_ENTRY_32BIT_FS), %ax + mov %ax, %fs + + /* restore proper idt */ + lidt idt_ptr +.endm + +/* + * In order to be independent of U-Boot's position in RAM we relocate a part + * of the code to the first megabyte of RAM, so the CPU can use it in + * real-mode. This code lives at asm_realmode_code. + */ + .globl asm_realmode_code +asm_realmode_code: + +/* Realmode IDT pointer structure. */ +__realmode_idt = PTR_TO_REAL_MODE(.) + .word 1023 /* 16 bit limit */ + .long 0 /* 24 bit base */ + .word 0 + +/* Preserve old stack */ +__stack = PTR_TO_REAL_MODE(.) + .long 0 + +/* Register store for realmode_call and realmode_interrupt */ +__registers = PTR_TO_REAL_MODE(.) + .long 0 /* 0 - EAX */ + .long 0 /* 4 - EBX */ + .long 0 /* 8 - ECX */ + .long 0 /* 12 - EDX */ + .long 0 /* 16 - ESI */ + .long 0 /* 20 - EDI */ + +/* 256 byte buffer, used by int10 */ + .globl asm_realmode_buffer +asm_realmode_buffer: + .skip 256 + + .code32 + .globl asm_realmode_call +asm_realmode_call: + /* save all registers to the stack */ + pusha + pushf + movl %esp, __stack + movl %esp, %ebp + + /* + * This function is called with regparm=0 and we have to skip the + * 36 bytes from pushf+pusha. Hence start at 40. + * Set up our call instruction. + */ + movl 40(%ebp), %eax + mov %ax, __lcall_instr + 1 + andl $0xffff0000, %eax + shrl $4, %eax + mov %ax, __lcall_instr + 3 + + wbinvd + + setup_registers + enter_real_mode + prepare_for_irom + +__lcall_instr = PTR_TO_REAL_MODE(.) + .byte 0x9a + .word 0x0000, 0x0000 + + enter_protected_mode + + /* restore stack pointer, eflags and register values and exit */ + movl __stack, %esp + popf + popa + ret + + .globl __realmode_interrupt +__realmode_interrupt: + /* save all registers to the stack and store the stack pointer */ + pusha + pushf + movl %esp, __stack + movl %esp, %ebp + + /* + * This function is called with regparm=0 and we have to skip the + * 36 bytes from pushf+pusha. Hence start at 40. + * Prepare interrupt calling code. + */ + movl 40(%ebp), %eax + movb %al, __intXX_instr + 1 /* intno */ + + setup_registers + enter_real_mode + prepare_for_irom + +__intXX_instr = PTR_TO_REAL_MODE(.) + .byte 0xcd, 0x00 /* This becomes intXX */ + + enter_protected_mode + + /* restore stack pointer, eflags and register values and exit */ + movl __stack, %esp + popf + popa + ret + +/* + * This is the 16-bit interrupt entry point called by the IDT stub code. + * + * Before this code code is called, %eax is pushed to the stack, and the + * interrupt number is loaded into %al. On return this function cleans up + * for its caller. + */ + .code16 +__interrupt_handler_16bit = PTR_TO_REAL_MODE(.) + push %ds + push %es + push %fs + push %gs + + /* Clear DF to not break ABI assumptions */ + cld + + /* + * Clean up the interrupt number. We could do this in the stub, but + * it would cost two more bytes per stub entry. + */ + andl $0xff, %eax + pushl %eax /* ... and make it the first parameter */ + + enter_protected_mode + + /* Call the C interrupt handler */ + movl $interrupt_handler, %eax + call *%eax + + enter_real_mode + + /* + * Restore all registers, including those manipulated by the C + * handler + */ + popl %eax + pop %gs + pop %fs + pop %es + pop %ds + popal + iret + + .globl asm_realmode_code_size +asm_realmode_code_size: + .long . - asm_realmode_code diff --git a/arch/x86/lib/bios_interrupts.c b/arch/x86/lib/bios_interrupts.c new file mode 100644 index 0000000000..b0e2ecbbca --- /dev/null +++ b/arch/x86/lib/bios_interrupts.c @@ -0,0 +1,217 @@ +/* + * From Coreboot + * + * Copyright (C) 2001 Ronald G. Minnich + * Copyright (C) 2005 Nick.Barker9@btinternet.com + * Copyright (C) 2007-2009 coresystems GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/pci.h> +#include "bios_emul.h" + +/* errors go in AH. Just set these up so that word assigns will work */ +enum { + PCIBIOS_SUCCESSFUL = 0x0000, + PCIBIOS_UNSUPPORTED = 0x8100, + PCIBIOS_BADVENDOR = 0x8300, + PCIBIOS_NODEV = 0x8600, + PCIBIOS_BADREG = 0x8700 +}; + +int int10_handler(void) +{ + static u8 cursor_row, cursor_col; + int res = 0; + + switch ((M.x86.R_EAX & 0xff00) >> 8) { + case 0x01: /* Set cursor shape */ + res = 1; + break; + case 0x02: /* Set cursor position */ + if (cursor_row != ((M.x86.R_EDX >> 8) & 0xff) || + cursor_col >= (M.x86.R_EDX & 0xff)) { + debug("\n"); + } + cursor_row = (M.x86.R_EDX >> 8) & 0xff; + cursor_col = M.x86.R_EDX & 0xff; + res = 1; + break; + case 0x03: /* Get cursor position */ + M.x86.R_EAX &= 0x00ff; + M.x86.R_ECX = 0x0607; + M.x86.R_EDX = (cursor_row << 8) | cursor_col; + res = 1; + break; + case 0x06: /* Scroll up */ + debug("\n"); + res = 1; + break; + case 0x08: /* Get Character and Mode at Cursor Position */ + M.x86.R_EAX = 0x0f00 | 'A'; /* White on black 'A' */ + res = 1; + break; + case 0x09: /* Write Character and attribute */ + case 0x0e: /* Write Character */ + debug("%c", M.x86.R_EAX & 0xff); + res = 1; + break; + case 0x0f: /* Get video mode */ + M.x86.R_EAX = 0x5002; /*80 x 25 */ + M.x86.R_EBX &= 0x00ff; + res = 1; + break; + default: + printf("Unknown INT10 function %04x\n", M.x86.R_EAX & 0xffff); + break; + } + return res; +} + +int int12_handler(void) +{ + M.x86.R_EAX = 64 * 1024; + return 1; +} + +int int16_handler(void) +{ + int res = 0; + + switch ((M.x86.R_EAX & 0xff00) >> 8) { + case 0x00: /* Check for Keystroke */ + M.x86.R_EAX = 0x6120; /* Space Bar, Space */ + res = 1; + break; + case 0x01: /* Check for Keystroke */ + M.x86.R_EFLG |= 1 << 6; /* Zero Flag set (no key available) */ + res = 1; + break; + default: + printf("Unknown INT16 function %04x\n", M.x86.R_EAX & 0xffff); + +break; + } + return res; +} + +#define PCI_CONFIG_SPACE_TYPE1 (1 << 0) +#define PCI_SPECIAL_CYCLE_TYPE1 (1 << 4) + +int int1a_handler(void) +{ + unsigned short func = (unsigned short)M.x86.R_EAX; + int retval = 1; + unsigned short devid, vendorid, devfn; + /* Use short to get rid of gabage in upper half of 32-bit register */ + short devindex; + unsigned char bus; + pci_dev_t dev; + u32 dword; + u16 word; + u8 byte, reg; + + switch (func) { + case 0xb101: /* PCIBIOS Check */ + M.x86.R_EDX = 0x20494350; /* ' ICP' */ + M.x86.R_EAX &= 0xffff0000; /* Clear AH / AL */ + M.x86.R_EAX |= PCI_CONFIG_SPACE_TYPE1 | + PCI_SPECIAL_CYCLE_TYPE1; + /* + * last bus in the system. Hard code to 255 for now. + * dev_enumerate() does not seem to tell us (publically) + */ + M.x86.R_ECX = 0xff; + M.x86.R_EDI = 0x00000000; /* protected mode entry */ + retval = 1; + break; + case 0xb102: /* Find Device */ + devid = M.x86.R_ECX; + vendorid = M.x86.R_EDX; + devindex = M.x86.R_ESI; + dev = pci_find_device(vendorid, devid, devindex); + if (dev != -1) { + unsigned short busdevfn; + M.x86.R_EAX &= 0xffff00ff; /* Clear AH */ + M.x86.R_EAX |= PCIBIOS_SUCCESSFUL; + /* + * busnum is an unsigned char; + * devfn is an int, so we mask it off. + */ + busdevfn = (PCI_BUS(dev) << 8) | PCI_DEV(dev) << 3 | + PCI_FUNC(dev); + debug("0x%x: return 0x%x\n", func, busdevfn); + M.x86.R_EBX = busdevfn; + retval = 1; + } else { + M.x86.R_EAX &= 0xffff00ff; /* Clear AH */ + M.x86.R_EAX |= PCIBIOS_NODEV; + retval = 0; + } + break; + case 0xb10a: /* Read Config Dword */ + case 0xb109: /* Read Config Word */ + case 0xb108: /* Read Config Byte */ + case 0xb10d: /* Write Config Dword */ + case 0xb10c: /* Write Config Word */ + case 0xb10b: /* Write Config Byte */ + devfn = M.x86.R_EBX & 0xff; + bus = M.x86.R_EBX >> 8; + reg = M.x86.R_EDI; + dev = PCI_BDF(bus, devfn >> 3, devfn & 7); + if (!dev) { + debug("0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, + bus, devfn); + /* Or are we supposed to return PCIBIOS_NODEV? */ + M.x86.R_EAX &= 0xffff00ff; /* Clear AH */ + M.x86.R_EAX |= PCIBIOS_BADREG; + retval = 0; + return retval; + } + switch (func) { + case 0xb108: /* Read Config Byte */ + byte = pci_read_config8(dev, reg); + M.x86.R_ECX = byte; + break; + case 0xb109: /* Read Config Word */ + word = pci_read_config16(dev, reg); + M.x86.R_ECX = word; + break; + case 0xb10a: /* Read Config Dword */ + dword = pci_read_config32(dev, reg); + M.x86.R_ECX = dword; + break; + case 0xb10b: /* Write Config Byte */ + byte = M.x86.R_ECX; + pci_write_config8(dev, reg, byte); + break; + case 0xb10c: /* Write Config Word */ + word = M.x86.R_ECX; + pci_write_config16(dev, reg, word); + break; + case 0xb10d: /* Write Config Dword */ + dword = M.x86.R_ECX; + pci_write_config32(dev, reg, dword); + break; + } + +#ifdef CONFIG_REALMODE_DEBUG + debug("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%x\n", func, + bus, devfn, reg, M.x86.R_ECX); +#endif + M.x86.R_EAX &= 0xffff00ff; /* Clear AH */ + M.x86.R_EAX |= PCIBIOS_SUCCESSFUL; + retval = 1; + break; + default: + printf("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func); + M.x86.R_EAX &= 0xffff00ff; /* Clear AH */ + M.x86.R_EAX |= PCIBIOS_UNSUPPORTED; + retval = 0; + break; + } + + return retval; +} diff --git a/arch/x86/lib/pcat_interrupts.c b/arch/x86/lib/pcat_interrupts.c index 4c86f7fc6a..a9af87e4ce 100644 --- a/arch/x86/lib/pcat_interrupts.c +++ b/arch/x86/lib/pcat_interrupts.c @@ -24,12 +24,10 @@ #error "CONFIG_SYS_NUM_IRQS must equal 16 if CONFIG_SYS_NUM_IRQS is defined" #endif -int interrupt_init(void) +int i8259_init(void) { u8 i; - disable_interrupts(); - /* Mask all interrupts */ outb(0xff, MASTER_PIC + IMR); outb(0xff, SLAVE_PIC + IMR); @@ -62,7 +60,8 @@ int interrupt_init(void) */ unmask_irq(2); - enable_interrupts(); + /* Interrupt 9 should be level triggered (SCI). The OS might do this */ + configure_irq_trigger(9, true); return 0; } @@ -114,3 +113,38 @@ void specific_eoi(int irq) outb(OCW2_SEOI | irq, MASTER_PIC + OCW2); } + +#define ELCR1 0x4d0 +#define ELCR2 0x4d1 + +void configure_irq_trigger(int int_num, bool is_level_triggered) +{ + u16 int_bits = inb(ELCR1) | (((u16)inb(ELCR2)) << 8); + + debug("%s: current interrupts are 0x%x\n", __func__, int_bits); + if (is_level_triggered) + int_bits |= (1 << int_num); + else + int_bits &= ~(1 << int_num); + + /* Write new values */ + debug("%s: try to set interrupts 0x%x\n", __func__, int_bits); + outb((u8)(int_bits & 0xff), ELCR1); + outb((u8)(int_bits >> 8), ELCR2); + +#ifdef PARANOID_IRQ_TRIGGERS + /* + * Try reading back the new values. This seems like an error but is + * not + */ + if (inb(ELCR1) != (int_bits & 0xff)) { + printf("%s: lower order bits are wrong: want 0x%x, got 0x%x\n", + __func__, (int_bits & 0xff), inb(ELCR1)); + } + + if (inb(ELCR2) != (int_bits >> 8)) { + printf("%s: higher order bits are wrong: want 0x%x, got 0x%x\n", + __func__, (int_bits>>8), inb(ELCR2)); + } +#endif +} diff --git a/arch/x86/lib/relocate.c b/arch/x86/lib/relocate.c index faca38fff4..b33586b54c 100644 --- a/arch/x86/lib/relocate.c +++ b/arch/x86/lib/relocate.c @@ -76,6 +76,9 @@ int do_elf_reloc_fixups(void) /* The size of the region of u-boot that runs out of RAM. */ uintptr_t size = (uintptr_t)&__bss_end - (uintptr_t)&__text_start; + if (re_src == re_end) + panic("No relocation data"); + do { /* Get the location from the relocation entry */ offset_ptr_rom = (Elf32_Addr *)re_src->r_offset; diff --git a/arch/x86/lib/string.c b/arch/x86/lib/string.c index a1656ccfe7..6c66431ed9 100644 --- a/arch/x86/lib/string.c +++ b/arch/x86/lib/string.c @@ -8,9 +8,9 @@ /* From glibc-2.14, sysdeps/i386/memset.c */ -#include <compiler.h> -#include <asm/string.h> #include <linux/types.h> +#include <linux/compiler.h> +#include <asm/string.h> typedef uint32_t op_t; diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c index 2b826dffc5..9d4c41b00b 100644 --- a/board/comelit/dig297/dig297.c +++ b/board/comelit/dig297/dig297.c @@ -133,6 +133,11 @@ int board_mmc_init(bd_t *bis) { return omap_mmc_init(0, 0, 0, -1, -1); } + +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} #endif #ifdef CONFIG_CMD_NET diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c index 886c723900..43463d5b47 100644 --- a/board/compulab/cm_t35/cm_t35.c +++ b/board/compulab/cm_t35/cm_t35.c @@ -382,6 +382,13 @@ int board_mmc_init(bd_t *bis) } #endif +#if defined(CONFIG_GENERIC_MMC) +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} +#endif + #ifdef CONFIG_SYS_I2C_OMAP34XX /* * Routine: reset_net_chip diff --git a/board/corscience/tricorder/tricorder.c b/board/corscience/tricorder/tricorder.c index 9e81bf3f3f..0fddf4551e 100644 --- a/board/corscience/tricorder/tricorder.c +++ b/board/corscience/tricorder/tricorder.c @@ -147,6 +147,13 @@ int board_mmc_init(bd_t *bis) } #endif +#if defined(CONFIG_GENERIC_MMC) +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} +#endif + /* * Routine: get_board_mem_timings * Description: If we use SPL then there is no x-loader nor config header diff --git a/board/google/chromebook_link/link.c b/board/google/chromebook_link/link.c index 88cee05241..1822237dd8 100644 --- a/board/google/chromebook_link/link.c +++ b/board/google/chromebook_link/link.c @@ -5,15 +5,14 @@ */ #include <common.h> +#include <cros_ec.h> #include <asm/gpio.h> int arch_early_init_r(void) { - return 0; -} + if (cros_ec_board_init()) + return -1; -int board_early_init_r(void) -{ return 0; } diff --git a/board/hermes/Kconfig b/board/hermes/Kconfig deleted file mode 100644 index deb37fdfd4..0000000000 --- a/board/hermes/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_HERMES - -config SYS_BOARD - default "hermes" - -config SYS_CONFIG_NAME - default "hermes" - -endif diff --git a/board/hermes/MAINTAINERS b/board/hermes/MAINTAINERS deleted file mode 100644 index a596dad890..0000000000 --- a/board/hermes/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -HERMES BOARD -M: Wolfgang Denk <wd@denx.de> -S: Maintained -F: board/hermes/ -F: include/configs/hermes.h -F: configs/hermes_defconfig diff --git a/board/hermes/Makefile b/board/hermes/Makefile deleted file mode 100644 index ccca520e42..0000000000 --- a/board/hermes/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = hermes.o flash.o diff --git a/board/hermes/flash.c b/board/hermes/flash.c deleted file mode 100644 index 38d3cd3955..0000000000 --- a/board/hermes/flash.c +++ /dev/null @@ -1,444 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_byte (flash_info_t *info, ulong dest, uchar data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size, size<<20); - } - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | - (memctl->memc_br0 & ~(BR_BA_MSK)); - - /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - - flash_info[0].size = size; - - return (size); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - uchar value; - vu_char *caddr = (vu_char *)addr; - ulong base = (ulong)addr; - - - /* Write auto select command: read Manufacturer ID */ - caddr[0x0AAA] = 0xAA; - caddr[0x0555] = 0x55; - caddr[0x0AAA] = 0x90; - - value = caddr[0]; - switch (value) { - case (AMD_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_AMD; - break; - case (FUJ_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = caddr[2]; /* device ID */ - - switch (value) { - case (AMD_ID_LV400T & 0xFF): - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 512 kB */ - - case (AMD_ID_LV400B & 0xFF): - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 512 kB */ - - case (AMD_ID_LV800T & 0xFF): - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV800B & 0xFF): - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV160T & 0xFF): - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (AMD_ID_LV160B & 0xFF): - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ -#if 0 /* enable when device IDs are available */ - case (AMD_ID_LV320T & 0xFF): - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (AMD_ID_LV320B & 0xFF): - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection: D0 = 1 if protected */ - caddr = (volatile unsigned char *)(info->start[i]); - info->protect[i] = caddr[4] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - caddr = (vu_char *)info->start[0]; - - *caddr = 0xF0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_char *addr = (vu_char*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0AAA] = 0xAA; - addr[0x0555] = 0x55; - addr[0x0AAA] = 0x80; - addr[0x0AAA] = 0xAA; - addr[0x0555] = 0x55; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_char*)(info->start[sect]); - addr[0] = 0x30; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_char*)(info->start[l_sect]); - while ((addr[0] & 0x80) != 0x80) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (vu_char *)info->start[0]; - addr[0] = 0xF0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - int rc; - - while (cnt > 0) { - if ((rc = write_byte(info, addr++, *src++)) != 0) { - return (rc); - } - --cnt; - } - - return (0); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_byte (flash_info_t *info, ulong dest, uchar data) -{ - vu_char *addr = (vu_char*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_char *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0AAA] = 0xAA; - addr[0x0555] = 0x55; - addr[0x0AAA] = 0xA0; - - *((vu_char *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c deleted file mode 100644 index 6126b73442..0000000000 --- a/board/hermes/hermes.c +++ /dev/null @@ -1,590 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <commproc.h> -#include <mpc8xx.h> - -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include <status_led.h> -# define SHOW_BOOT_PROGRESS(arg) bootstage_mark(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); -static ulong board_init (void); -static void send_smi_frame (volatile scc_t * sp, volatile cbd_t * bd, - uchar * msg); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -const uint sdram_table[] = { - /* - * Single Read. (Offset 0 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00, - 0x1ff77c47, /* last */ - /* - * SDRAM Initialization (offset 5 in UPMA RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0x1fe77c35, 0xffaffc34, 0x1fa57c35, /* last */ - /* - * Burst Read. (Offset 8 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00, - 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPMA RAM) - */ - 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaebc00, 0x10ad4c00, 0xf0afcc00, - 0xf0afcc00, 0xe1bb8c06, 0x1ff77c47, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPMA RAM) - */ - 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04, - 0xfffffc84, 0xfffffc07, /* last */ - _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Exception. (Offset 3c in UPMA RAM) - */ - 0x7ffffc07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - * - * Test ID string (HERMES...) - * - * Return code for board revision and network speed - */ - -int checkboard (void) -{ - char buf[64]; - int i; - int l = getenv_f("serial#", buf, sizeof(buf)); - - puts ("Board: "); - - if (l < 0 || strncmp(buf, "HERMES", 6)) { - puts ("### No HW ID - assuming HERMES-PRO"); - } else { - for (i = 0; i < l; i++) { - if (buf[i] == ' ') - break; - putc (buf[i]); - } - } - - gd->board_type = board_init (); - - printf (" Rev. %ld.x\n", (gd->board_type >> 16)); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size, size8, size9; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* - * Preliminary prescaler for refresh - */ - memctl->memc_mptpr = 0x0400; - - memctl->memc_mar = 0x00000088; - - /* - * Map controller banks 1 to the SDRAM banks at preliminary address - */ - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; - - /* HERMES-PRO boards have only one bank SDRAM */ - - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mamr = 0xD0802114; - memctl->memc_mcr = 0x80002105; - udelay (1); - memctl->memc_mamr = 0xD0802118; - memctl->memc_mcr = 0x80002130; - udelay (1); - memctl->memc_mamr = 0xD0802114; - memctl->memc_mcr = 0x80002106; - - udelay (1000); - - /* - * Check Bank 0 Memory Size for re-configuration - * - * try 8 column mode - */ - size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE_PRELIM, - SDRAM_MAX_SIZE); - - udelay (1000); - - /* - * try 9 column mode - */ - size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE_PRELIM, - SDRAM_MAX_SIZE); - - if (size8 < size9) { /* leave configuration at 9 columns */ - size = size9; -/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ - } else { /* back to 8 columns */ - size = size8; - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; - udelay (500); -/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ - } - - udelay (1000); - - memctl->memc_or1 = ((-size) & 0xFFFF0000) | SDRAM_TIMING; - memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - - udelay (10000); - - return (size); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size(base, maxsize)); -} - -/* ------------------------------------------------------------------------- */ - -#define PB_LED_3 0x00020000 /* Status LED's */ -#define PB_LED_2 0x00010000 -#define PB_LED_1 0x00008000 -#define PB_LED_0 0x00004000 - -#define PB_LED_ALL (PB_LED_0 | PB_LED_1 | PB_LED_2 | PB_LED_3) - -#define PC_REP_SPD1 0x00000800 -#define PC_REP_SPD0 0x00000400 - -#define PB_RESET_2081 0x00000020 /* Reset PEB2081 */ - -#define PB_MAI_4 0x00000010 /* Configuration */ -#define PB_MAI_3 0x00000008 -#define PB_MAI_2 0x00000004 -#define PB_MAI_1 0x00000002 -#define PB_MAI_0 0x00000001 - -#define PB_MAI_ALL (PB_MAI_0 | PB_MAI_1 | PB_MAI_2 | PB_MAI_3 | PB_MAI_4) - - -#define PC_REP_MGRPRS 0x0200 -#define PC_REP_SPD 0x0040 /* Select 100 Mbps */ -#define PC_REP_RES 0x0004 -#define PC_BIT14 0x0002 /* ??? */ -#define PC_BIT15 0x0001 /* ??? ENDSL ?? */ - -/* ------------------------------------------------------------------------- */ - -static ulong board_init (void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - ulong reg, revision, speed = 100; - int ethspeed; - char *s; - - if ((s = getenv ("ethspeed")) != NULL) { - if (strcmp (s, "100") == 0) { - ethspeed = 100; - } else if (strcmp (s, "10") == 0) { - ethspeed = 10; - } else { - ethspeed = 0; - } - } else { - ethspeed = 0; - } - - /* Configure Port B Output Pins => 0x0003cc3F */ - reg = PB_LED_ALL | PC_REP_SPD1 | PC_REP_SPD0 | PB_RESET_2081 | - PB_MAI_ALL; - immr->im_cpm.cp_pbpar &= ~reg; - immr->im_cpm.cp_pbodr &= ~reg; - immr->im_cpm.cp_pbdat &= ~reg; /* all 0 */ - immr->im_cpm.cp_pbdir |= reg; - - /* Check hardware revision */ - if ((immr->im_ioport.iop_pcdat & 0x0003) == 0x0003) { - /* - * Revision 3.x hardware - */ - revision = 3; - - immr->im_ioport.iop_pcdat = 0x0240; - immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_SPD | PC_REP_RES | PC_BIT14); /* = 0x0246 */ - immr->im_ioport.iop_pcdat |= PC_REP_RES; - } else { - immr->im_ioport.iop_pcdat = 0x0002; - immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_RES | PC_BIT14 | PC_BIT15); /* = 0x0207 */ - - if ((immr->im_ioport.iop_pcdat & PC_REP_SPD) == 0) { - /* - * Revision 2.x hardware: PC9 connected to PB21 - */ - revision = 2; - - if (ethspeed == 0) { - /* both 10 and 100 Mbps allowed: - * select 10 Mbps and autonegotiation - */ - puts (" [10+100]"); - immr->im_cpm.cp_pbdat = 0; /* SPD1:SPD0 = 0:0 - autonegot. */ - speed = 10; - } else if (ethspeed == 10) { - /* we are asked for 10 Mbps, - * so select 10 Mbps - */ - puts (" [10]"); - immr->im_cpm.cp_pbdat = 0; /* ??? */ - speed = 10; - } else { - /* anything else: - * select 100 Mbps - */ - puts (" [100]"); - immr->im_cpm.cp_pbdat = PC_REP_SPD0 | PC_REP_SPD1; - /* SPD1:SPD0 = 1:1 - 100 Mbps */ - speed = 100; - } - immr->im_ioport.iop_pcdat |= (PC_REP_RES | PC_BIT14); - - /* must be run from RAM */ - /* start_lxt980 (speed); */ - /*************************/ - } else { - /* - * Revision 1.x hardware - */ - revision = 1; - - immr->im_ioport.iop_pcdat = PC_REP_MGRPRS | PC_BIT14; /* = 0x0202 */ - immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_SPD | PC_REP_RES | PC_BIT14 | PC_BIT15); /* = 0x0247 */ - - if (ethspeed == 0) { - /* both 10 and 100 Mbps allowed: - * select 100 Mbps and autonegotiation - */ - puts (" [10+100]"); - immr->im_cpm.cp_pbdat = 0; /* SPD1:SPD0 = 0:0 - autonegot. */ - immr->im_ioport.iop_pcdat |= PC_REP_SPD; - } else if (ethspeed == 10) { - /* we are asked for 10 Mbps, - * so select 10 Mbps - */ - puts (" [10]"); - immr->im_cpm.cp_pbdat = PC_REP_SPD0; /* SPD1:SPD0 = 0:1 - 10 Mbps */ - } else { - /* anything else: - * select 100 Mbps - */ - puts (" [100]"); - immr->im_cpm.cp_pbdat = PC_REP_SPD0 | PC_REP_SPD1; - /* SPD1:SPD0 = 1:1 - 100 Mbps */ - immr->im_ioport.iop_pcdat |= PC_REP_SPD; - } - - immr->im_ioport.iop_pcdat |= PC_REP_RES; - } - } - SHOW_BOOT_PROGRESS(BOOTSTAGE_ID_CHECK_MAGIC); - - return ((revision << 16) | (speed & 0xFFFF)); -} - -/* ------------------------------------------------------------------------- */ - -#define SCC_SM 1 /* Index => SCC2 */ -#define PROFF PROFF_SCC2 - -#define SMI_MSGLEN 8 /* Length of SMI Messages */ - -#define PHYGPCR_ADDR 0x109 /* Port Enable */ -#define PHYPCR_ADDR 0x132 /* PHY Port Control Reg. (port 1) */ -#define LEDPCR_ADDR 0x141 /* LED Port Control Reg. */ -#define RPRESET_ADDR 0x144 /* Repeater Reset */ - -#define PHYPCR_SPEED 0x2000 /* on for 100 Mbps, off for 10 Mbps */ -#define PHYPCR_AN 0x1000 /* on to enable Auto-Negotiation */ -#define PHYPCR_REST_AN 0x0200 /* on to restart Auto-Negotiation */ -#define PHYPCR_FDX 0x0100 /* on for Full Duplex, off for HDX */ -#define PHYPCR_COLT 0x0080 /* on to enable COL signal test */ - -/* ------------------------------------------------------------------------- */ - -/* - * Must run from RAM: - * uses parameter RAM area which is used for stack while running from ROM - */ -void hermes_start_lxt980 (int speed) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile cpm8xx_t *cp = (cpm8xx_t *) & (immr->im_cpm); - volatile scc_t *sp = (scc_t *) & (cp->cp_scc[SCC_SM]); - volatile cbd_t *bd; - volatile hdlc_pram_t *hp; - uchar smimsg[SMI_MSGLEN]; - ushort phypcrval; - uint bd_off; - int pnr; - - printf ("LXT9880: %3d Mbps\n", speed); - - immr->im_ioport.iop_paodr |= 0x0008; /* init PAODR: PA12 (TXD2) open drain */ - immr->im_ioport.iop_papar |= 0x400c; /* init PAPAR: TXD2, RXD2, BRGO4 */ - immr->im_ioport.iop_padir &= 0xbff3; /* init PADIR: BRGO4 */ - immr->im_ioport.iop_padir |= 0x4000; - - /* get temporary BD; no need for permanent alloc */ - bd_off = dpram_base_align (8); - - bd = (cbd_t *) (immr->im_cpm.cp_dpmem + bd_off); - - bd->cbd_bufaddr = 0; - bd->cbd_datlen = 0; - bd->cbd_sc = BD_SC_WRAP | BD_SC_LAST | BD_SC_INTRPT | BD_SC_TC; - - /* init. baudrate generator BRG4 */ - cp->cp_brgc4 = (0x00010000 | (50 << 1)); /* output 1 MHz */ - - cp->cp_sicr &= 0xFFFF00FF; /* SICR: mask SCC2 */ - cp->cp_sicr |= 0x00001B00; /* SICR: SCC2 clk BRG4 */ - - /* init SCC_SM register */ - sp->scc_psmr = 0x0000; /* init PSMR: no additional flags */ - sp->scc_todr = 0x0000; - sp->scc_dsr = 0x7e7e; - - /* init. SCC_SM parameter area */ - hp = (hdlc_pram_t *) & cp->cp_dparam[PROFF]; - - hp->tbase = bd_off; /* offset from beginning of DPRAM */ - - hp->rfcr = 0x18; - hp->tfcr = 0x18; - hp->mrblr = 10; - - hp->c_mask = 0x0000f0b8; - hp->c_pres = 0x0000ffff; - - hp->disfc = 0; - hp->crcec = 0; - hp->abtsc = 0; - hp->nmarc = 0; - hp->retrc = 0; - - hp->mflr = 10; - - hp->rfthr = 1; - - hp->hmask = 0; - hp->haddr1 = 0; - hp->haddr2 = 0; - hp->haddr3 = 0; - hp->haddr4 = 0; - - cp->cp_cpcr = SCC_SM << 6 | 0x0001; /* SCC_SM: init TX/RX params */ - while (cp->cp_cpcr & CPM_CR_FLG); - - /* clear all outstanding SCC events */ - sp->scc_scce = ~0; - - /* enable transmitter: GSMR_L: TPL=2(16bits), TPP=3(all ones), ENT */ - sp->scc_gsmrh = 0; - sp->scc_gsmrl |= SCC_GSMRL_TPL_16 | SCC_GSMRL_TPP_ALL1 | - SCC_GSMRL_ENT | SCC_GSMRL_MODE_HDLC; - -#if 0 - smimsg[0] = 0x00; /* CHIP/HUB ID */ - smimsg[1] = 0x38; /* WRITE CMD */ - smimsg[2] = (RPRESET_ADDR << 4) & 0xf0; - smimsg[3] = RPRESET_ADDR >> 4; - smimsg[4] = 0x01; - smimsg[5] = 0x00; - smimsg[6] = 0x00; - smimsg[7] = 0x00; - - send_smi_frame (sp, bd, smimsg); -#endif - - smimsg[0] = 0x7f; /* BROADCAST */ - smimsg[1] = 0x34; /* ASSIGN HUB ID */ - smimsg[2] = 0x00; - smimsg[3] = 0x00; - smimsg[4] = 0x00; /* HUB ID = 0 */ - smimsg[5] = 0x00; - smimsg[6] = 0x00; - smimsg[7] = 0x00; - - send_smi_frame (sp, bd, smimsg); - - smimsg[0] = 0x7f; /* BROADCAST */ - smimsg[1] = 0x3c; /* SET ARBOUT TO 0 */ - smimsg[2] = 0x00; /* ADDRESS = 0 */ - smimsg[3] = 0x00; - smimsg[4] = 0x00; /* DATA = 0 */ - smimsg[5] = 0x00; - smimsg[6] = 0x00; - smimsg[7] = 0x00; - - send_smi_frame (sp, bd, smimsg); - - if (speed == 100) { - phypcrval = PHYPCR_SPEED; /* 100 MBIT, disable autoneg. */ - } else { - phypcrval = 0; /* 10 MBIT, disable autoneg. */ - } - - /* send MSGs */ - for (pnr = 0; pnr < 8; pnr++) { - smimsg[0] = 0x00; /* CHIP/HUB ID */ - smimsg[1] = 0x38; /* WRITE CMD */ - smimsg[2] = ((PHYPCR_ADDR + pnr) << 4) & 0xf0; - smimsg[3] = (PHYPCR_ADDR + pnr) >> 4; - smimsg[4] = (unsigned char) (phypcrval & 0xff); - smimsg[5] = (unsigned char) (phypcrval >> 8); - smimsg[6] = 0x00; - smimsg[7] = 0x00; - - send_smi_frame (sp, bd, smimsg); - } - - smimsg[0] = 0x00; /* CHIP/HUB ID */ - smimsg[1] = 0x38; /* WRITE CMD */ - smimsg[2] = (PHYGPCR_ADDR << 4) & 0xf0; - smimsg[3] = PHYGPCR_ADDR >> 4; - smimsg[4] = 0xff; /* enable port 1-8 */ - smimsg[5] = 0x01; /* enable MII1 (0x01) */ - smimsg[6] = 0x00; - smimsg[7] = 0x00; - - send_smi_frame (sp, bd, smimsg); - - smimsg[0] = 0x00; /* CHIP/HUB ID */ - smimsg[1] = 0x38; /* WRITE CMD */ - smimsg[2] = (LEDPCR_ADDR << 4) & 0xf0; - smimsg[3] = LEDPCR_ADDR >> 4; - smimsg[4] = 0xaa; /* Port 1-8 Conf.bits = 10 (Hardware control) */ - smimsg[5] = 0xaa; - smimsg[6] = 0x00; - smimsg[7] = 0x00; - - send_smi_frame (sp, bd, smimsg); - - /* - * Disable Transmitter (so that we can free the BD, too) - */ - sp->scc_gsmrl &= ~SCC_GSMRL_ENT; -} - -/* ------------------------------------------------------------------------- */ - -static void send_smi_frame (volatile scc_t * sp, volatile cbd_t * bd, - uchar * msg) -{ -#ifdef DEBUG - unsigned hub, chip, cmd, length, addr; - - hub = msg[0] & 0x1F; - chip = msg[0] >> 5; - cmd = msg[1] & 0x1F; - length = (msg[1] >> 5) | ((msg[2] & 0x0F) << 3); - addr = (msg[2] >> 4) | (msg[3] << 4); - - printf ("SMI send: Hub %02x Chip %x Cmd %02x Len %d Addr %03x: " - "%02x %02x %02x %02x\n", - hub, chip, cmd, length, addr, msg[4], msg[5], msg[6], msg[7]); -#endif /* DEBUG */ - - bd->cbd_bufaddr = (uint) msg; - bd->cbd_datlen = SMI_MSGLEN; - bd->cbd_sc |= BD_SC_READY; - - /* wait for msg transmitted */ - while ((sp->scc_scce & 0x0002) == 0); - /* clear all events */ - sp->scc_scce = ~0; -} - -/* ------------------------------------------------------------------------- */ - -void show_boot_progress (int status) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - /* let things compatible */ - if (status < -BOOTSTAGE_ID_POST_FAIL_R) - status = -1; - status ^= 0x0F; - status = (status & 0x0F) << 14; - immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & ~PB_LED_ALL) | status; -} - -/* ------------------------------------------------------------------------- */ diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds deleted file mode 100644 index 0309860391..0000000000 --- a/board/hermes/u-boot.lds +++ /dev/null @@ -1,88 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - board/hermes/built-in.o (.text*) - - . = env_offset; - common/env_embedded.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug deleted file mode 100644 index f34c07ba2b..0000000000 --- a/board/hermes/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - arch/powerpc/lib/ppcstring.o (.text) - arch/powerpc/cpu/mpc8xx/interrupts.o (.text) - arch/powerpc/lib/time.o (.text) - arch/powerpc/lib/ticks.o (.text) - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 7b87cc27c4..47522f8013 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -150,6 +150,13 @@ int board_mmc_init(bd_t *bis) } #endif +#if defined(CONFIG_GENERIC_MMC) +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} +#endif + void set_fdt(void) { switch (gd->bd->bi_arch_number) { diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c index 1fd9f2cf01..609edf1e5c 100644 --- a/board/logicpd/omap3som/omap3logic.c +++ b/board/logicpd/omap3som/omap3logic.c @@ -128,6 +128,13 @@ int board_mmc_init(bd_t *bis) } #endif +#if defined(CONFIG_GENERIC_MMC) +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} +#endif + #ifdef CONFIG_SMC911X /* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */ static const u32 gpmc_lan92xx_config[] = { diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c index 9ef002637a..d39203a917 100644 --- a/board/logicpd/zoom1/zoom1.c +++ b/board/logicpd/zoom1/zoom1.c @@ -109,6 +109,11 @@ int board_mmc_init(bd_t *bis) { return omap_mmc_init(0, 0, 0, -1, -1); } + +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} #endif #ifdef CONFIG_CMD_NET diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c index a69359fa1d..c9d615b79a 100644 --- a/board/matrix_vision/mvblx/mvblx.c +++ b/board/matrix_vision/mvblx/mvblx.c @@ -94,6 +94,12 @@ int board_mmc_init(bd_t *bis) omap_mmc_init(1, 0, 0, -1, -1); return 0; } + +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); + twl4030_power_mmc_init(1); +} #endif #if defined(CONFIG_CMD_NET) diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index c2e07dbd9b..b6b8ad6c48 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -659,3 +659,9 @@ int board_mmc_init(bd_t *bis) omap_mmc_init(1, 0, 0, -1, -1); return 0; } + +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); + twl4030_power_mmc_init(1); +} diff --git a/board/overo/overo.c b/board/overo/overo.c index dfb8602baf..b7f85e711b 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -493,6 +493,13 @@ int board_mmc_init(bd_t *bis) } #endif +#if defined(CONFIG_GENERIC_MMC) +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} +#endif + #if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD) static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c index 146dcea4e1..59b5a7e2cd 100644 --- a/board/pandora/pandora.c +++ b/board/pandora/pandora.c @@ -126,4 +126,9 @@ int board_mmc_init(bd_t *bis) { return omap_mmc_init(0, 0, 0, -1, -1); } + +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} #endif diff --git a/board/raspberrypi/rpi_b/Kconfig b/board/raspberrypi/rpi/Kconfig index 501d511f59..6a538cfac5 100644 --- a/board/raspberrypi/rpi_b/Kconfig +++ b/board/raspberrypi/rpi/Kconfig @@ -1,7 +1,7 @@ -if TARGET_RPI_B +if TARGET_RPI config SYS_BOARD - default "rpi_b" + default "rpi" config SYS_VENDOR default "raspberrypi" @@ -10,6 +10,6 @@ config SYS_SOC default "bcm2835" config SYS_CONFIG_NAME - default "rpi_b" + default "rpi" endif diff --git a/board/raspberrypi/rpi/MAINTAINERS b/board/raspberrypi/rpi/MAINTAINERS new file mode 100644 index 0000000000..6dcb7bd24e --- /dev/null +++ b/board/raspberrypi/rpi/MAINTAINERS @@ -0,0 +1,6 @@ +RPI BOARD +M: Stephen Warren <swarren@wwwdotorg.org> +S: Maintained +F: board/raspberrypi/rpi/ +F: include/configs/rpi.h +F: configs/rpi_defconfig diff --git a/board/raspberrypi/rpi_b/Makefile b/board/raspberrypi/rpi/Makefile index 7e9bfbff0c..c53c92b1dd 100644 --- a/board/raspberrypi/rpi_b/Makefile +++ b/board/raspberrypi/rpi/Makefile @@ -12,4 +12,4 @@ # GNU General Public License for more details. # -obj-y := rpi_b.o +obj-y := rpi.o diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi/rpi.c index db904a4107..51a4fa1030 100644 --- a/board/raspberrypi/rpi_b/rpi_b.c +++ b/board/raspberrypi/rpi/rpi.c @@ -42,6 +42,12 @@ struct msg_get_arm_mem { u32 end_tag; }; +struct msg_get_board_rev { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_get_board_rev get_board_rev; + u32 end_tag; +}; + struct msg_get_mac_address { struct bcm2835_mbox_hdr hdr; struct bcm2835_mbox_tag_get_mac_address get_mac_address; @@ -60,6 +66,67 @@ struct msg_get_clock_rate { u32 end_tag; }; +/* See comments in mbox.h for data source */ +static const struct { + const char *name; + const char *fdtfile; +} models[] = { + [BCM2835_BOARD_REV_B_I2C0_2] = { + "Model B (no P5)", + "bcm2835-rpi-b-i2c0.dtb", + }, + [BCM2835_BOARD_REV_B_I2C0_3] = { + "Model B (no P5)", + "bcm2835-rpi-b-i2c0.dtb", + }, + [BCM2835_BOARD_REV_B_I2C1_4] = { + "Model B", + "bcm2835-rpi-b.dtb", + }, + [BCM2835_BOARD_REV_B_I2C1_5] = { + "Model B", + "bcm2835-rpi-b.dtb", + }, + [BCM2835_BOARD_REV_B_I2C1_6] = { + "Model B", + "bcm2835-rpi-b.dtb", + }, + [BCM2835_BOARD_REV_A_7] = { + "Model A", + "bcm2835-rpi-a.dtb", + }, + [BCM2835_BOARD_REV_A_8] = { + "Model A", + "bcm2835-rpi-a.dtb", + }, + [BCM2835_BOARD_REV_A_9] = { + "Model A", + "bcm2835-rpi-a.dtb", + }, + [BCM2835_BOARD_REV_B_REV2_d] = { + "Model B rev2", + "bcm2835-rpi-b-rev2.dtb", + }, + [BCM2835_BOARD_REV_B_REV2_e] = { + "Model B rev2", + "bcm2835-rpi-b-rev2.dtb", + }, + [BCM2835_BOARD_REV_B_REV2_f] = { + "Model B rev2", + "bcm2835-rpi-b-rev2.dtb", + }, + [BCM2835_BOARD_REV_B_PLUS] = { + "Model B+", + "bcm2835-rpi-b-plus.dtb", + }, + [BCM2835_BOARD_REV_CM] = { + "Compute Module", + "bcm2835-rpi-cm.dtb", + }, +}; + +u32 rpi_board_rev = 0; + int dram_init(void) { ALLOC_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1, 16); @@ -79,13 +146,27 @@ int dram_init(void) return 0; } -int misc_init_r(void) +static void set_fdtfile(void) +{ + const char *fdtfile; + + if (getenv("fdtfile")) + return; + + fdtfile = models[rpi_board_rev].fdtfile; + if (!fdtfile) + fdtfile = "bcm2835-rpi-other.dtb"; + + setenv("fdtfile", fdtfile); +} + +static void set_usbethaddr(void) { ALLOC_ALIGN_BUFFER(struct msg_get_mac_address, msg, 1, 16); int ret; if (getenv("usbethaddr")) - return 0; + return; BCM2835_MBOX_INIT_HDR(msg); BCM2835_MBOX_INIT_TAG(&msg->get_mac_address, GET_MAC_ADDRESS); @@ -94,11 +175,18 @@ int misc_init_r(void) if (ret) { printf("bcm2835: Could not query MAC address\n"); /* Ignore error; not critical */ - return 0; + return; } eth_setenv_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac); + return; +} + +int misc_init_r(void) +{ + set_fdtfile(); + set_usbethaddr(); return 0; } @@ -126,8 +214,36 @@ static int power_on_module(u32 module) return 0; } +static void get_board_rev(void) +{ + ALLOC_ALIGN_BUFFER(struct msg_get_board_rev, msg, 1, 16); + int ret; + const char *name; + + BCM2835_MBOX_INIT_HDR(msg); + BCM2835_MBOX_INIT_TAG(&msg->get_board_rev, GET_BOARD_REV); + + ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr); + if (ret) { + printf("bcm2835: Could not query board revision\n"); + /* Ignore error; not critical */ + return; + } + + rpi_board_rev = msg->get_board_rev.body.resp.rev; + if (rpi_board_rev >= ARRAY_SIZE(models)) + rpi_board_rev = 0; + + name = models[rpi_board_rev].name; + if (!name) + name = "Unknown model"; + printf("RPI model: %s\n", name); +} + int board_init(void) { + get_board_rev(); + gd->bd->bi_boot_params = 0x100; return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD); diff --git a/board/raspberrypi/rpi_b/MAINTAINERS b/board/raspberrypi/rpi_b/MAINTAINERS deleted file mode 100644 index 14f39486a3..0000000000 --- a/board/raspberrypi/rpi_b/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -RPI_B BOARD -M: Stephen Warren <swarren@wwwdotorg.org> -S: Maintained -F: board/raspberrypi/rpi_b/ -F: include/configs/rpi_b.h -F: configs/rpi_b_defconfig diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index 2782bcc2a7..cc0ac6b0bd 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -96,15 +96,6 @@ const struct dpll_params *get_dpll_ddr_params(void) return &dpll_ddr; } -#ifdef CONFIG_BOARD_LATE_INIT -int board_late_init(void) -{ - omap_nand_switch_ecc(1, 8); - - return 0; -} -#endif - #ifndef CONFIG_SPL_BUILD #if defined(BOARD_DFU_BUTTON_GPIO) /* diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c index 266dbbbb5f..7baac3dda6 100644 --- a/board/siemens/common/factoryset.c +++ b/board/siemens/common/factoryset.c @@ -86,6 +86,7 @@ int get_factory_record_val(unsigned char *eeprom_buf, int size, uchar *record, int i, nxt = 0; int c; unsigned char end = 0xff; + unsigned char tmp; for (i = 0; fact_get_char(i) != end; i = nxt) { nxt = i + 1; @@ -93,6 +94,7 @@ int get_factory_record_val(unsigned char *eeprom_buf, int size, uchar *record, int pos; int endpos; int z; + int level = 0; c = strncmp((char *)&eeprom_buf[i + 1], (char *)record, strlen((char *)record)); @@ -103,22 +105,30 @@ int get_factory_record_val(unsigned char *eeprom_buf, int size, uchar *record, /* search for "<" */ c = -1; for (z = pos; fact_get_char(z) != end; z++) { - if ((fact_get_char(z) == '<') || - (fact_get_char(z) == '>')) { - endpos = z; - nxt = endpos; - c = 0; - break; + if (fact_get_char(z) == '<') { + if (level == 0) { + endpos = z; + nxt = endpos; + c = 0; + break; + } else { + level--; + } } + if (fact_get_char(z) == '>') + level++; } + } else { + continue; } if (c == 0) { /* end found -> call get_factory_val */ + tmp = eeprom_buf[endpos]; eeprom_buf[endpos] = end; ret = get_factory_val(&eeprom_buf[pos], - size - pos, name, buf, len); + endpos - pos, name, buf, len); /* fix buffer */ - eeprom_buf[endpos] = '<'; + eeprom_buf[endpos] = tmp; debug("%s: %s.%s = %s\n", __func__, record, name, buf); return ret; @@ -210,15 +220,6 @@ int factoryset_read_eeprom(int i2c_addr) printf("DFU USB: VID = 0x%4x, PID = 0x%4x\n", factory_dat.usb_vendor_id, factory_dat.usb_product_id); #endif - if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV", - (uchar *)"id", buf, - MAX_STRING_LENGTH)) { - if (strncmp((const char *)buf, "PXM50", 5) == 0) - factory_dat.pxm50 = 1; - else - factory_dat.pxm50 = 0; - } - debug("PXM50: %d\n", factory_dat.pxm50); #if defined(CONFIG_VIDEO) if (0 <= get_factory_record_val(cp, size, (uchar *)"DISP1", (uchar *)"name", factory_dat.disp_name, @@ -238,6 +239,23 @@ int factoryset_read_eeprom(int i2c_addr) NULL, 16); debug("version number: %d\n", factory_dat.version); } + /* Get ASN from factory set if available */ + if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV", + (uchar *)"id", factory_dat.asn, + MAX_STRING_LENGTH)) { + debug("factoryset asn: %s\n", factory_dat.asn); + } else { + factory_dat.asn[0] = 0; + } + /* Get COMP/ver from factory set if available */ + if (0 <= get_factory_record_val(cp, size, (uchar *)"COMP", + (uchar *)"ver", + factory_dat.comp_version, + MAX_STRING_LENGTH)) { + debug("factoryset COMP/ver: %s\n", factory_dat.comp_version); + } else { + strcpy((char *)factory_dat.comp_version, "1.0"); + } return 0; diff --git a/board/siemens/common/factoryset.h b/board/siemens/common/factoryset.h index 4d6de10f52..3f23d5ebf4 100644 --- a/board/siemens/common/factoryset.h +++ b/board/siemens/common/factoryset.h @@ -20,6 +20,8 @@ struct factorysetcontainer { #endif unsigned char serial[MAX_STRING_LENGTH]; int version; + uchar asn[MAX_STRING_LENGTH]; + uchar comp_version[MAX_STRING_LENGTH]; }; int factoryset_read_eeprom(int i2c_addr); diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c index 9be2e344f8..ede73baf3e 100644 --- a/board/siemens/draco/board.c +++ b/board/siemens/draco/board.c @@ -280,4 +280,13 @@ U_BOOT_CMD( #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + omap_nand_switch_ecc(1, 8); + + return 0; +} +#endif + #include "../common/board.c" diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 559af0e0e5..264ba025b7 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -428,4 +428,38 @@ static int board_video_init(void) return 0; } #endif + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + int ret; + + omap_nand_switch_ecc(1, 8); + +#ifdef CONFIG_FACTORYSET + if (factory_dat.asn[0] != 0) { + char tmp[2 * MAX_STRING_LENGTH + 2]; + + if (strncmp((const char *)factory_dat.asn, "PXM50", 5) == 0) + factory_dat.pxm50 = 1; + else + factory_dat.pxm50 = 0; + sprintf(tmp, "%s_%s", factory_dat.asn, + factory_dat.comp_version); + ret = setenv("boardid", tmp); + if (ret) + printf("error setting board id\n"); + } else { + factory_dat.pxm50 = 1; + ret = setenv("boardid", "PXM50_1.0"); + if (ret) + printf("error setting board id\n"); + } + debug("PXM50: %d\n", factory_dat.pxm50); +#endif + + return 0; +} +#endif + #include "../common/board.c" diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index 1752df2c4f..fb840f7ed2 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -467,4 +467,27 @@ static int board_video_init(void) return 0; } #endif /* ifdef CONFIG_VIDEO */ + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + int ret; + char tmp[2 * MAX_STRING_LENGTH + 2]; + + omap_nand_switch_ecc(1, 8); + + if (factory_dat.asn[0] != 0) + sprintf(tmp, "%s_%s", factory_dat.asn, + factory_dat.comp_version); + else + sprintf(tmp, "QMX7.E38_4.0"); + + ret = setenv("boardid", tmp); + if (ret) + printf("error setting board id\n"); + + return 0; +} +#endif + #include "../common/board.c" diff --git a/board/technexion/tao3530/tao3530.c b/board/technexion/tao3530/tao3530.c index 44a82406aa..744ff44008 100644 --- a/board/technexion/tao3530/tao3530.c +++ b/board/technexion/tao3530/tao3530.c @@ -188,6 +188,13 @@ int board_mmc_init(bd_t *bis) } #endif +#if defined(CONFIG_GENERIC_MMC) +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} +#endif + #if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD) /* Call usb_stop() before starting the kernel */ void show_boot_progress(int val) diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 4c5e38136f..7b37fbe299 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -534,6 +534,13 @@ int board_mmc_init(bd_t *bis) } #endif +#if defined(CONFIG_GENERIC_MMC) +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} +#endif + #if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD) /* Call usb_stop() before starting the kernel */ void show_boot_progress(int val) diff --git a/board/ti/beagle_x15/Kconfig b/board/ti/beagle_x15/Kconfig new file mode 100644 index 0000000000..a305ff1044 --- /dev/null +++ b/board/ti/beagle_x15/Kconfig @@ -0,0 +1,12 @@ +if TARGET_BEAGLE_X15 + +config SYS_BOARD + default "beagle_x15" + +config SYS_VENDOR + default "ti" + +config SYS_CONFIG_NAME + default "beagle_x15" + +endif diff --git a/board/ti/beagle_x15/Makefile b/board/ti/beagle_x15/Makefile new file mode 100644 index 0000000000..5cd6873f5e --- /dev/null +++ b/board/ti/beagle_x15/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2014 +# Texas Instruments, <www.ti.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := board.o diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c new file mode 100644 index 0000000000..db96e347e7 --- /dev/null +++ b/board/ti/beagle_x15/board.c @@ -0,0 +1,395 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Felipe Balbi <balbi@ti.com> + * + * Based on board/ti/dra7xx/evm.c + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <palmas.h> +#include <sata.h> +#include <usb.h> +#include <asm/omap_common.h> +#include <asm/emif.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sata.h> +#include <asm/arch/gpio.h> +#include <environment.h> + +#include "mux_data.h" + +#ifdef CONFIG_DRIVER_TI_CPSW +#include <cpsw.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +const struct omap_sysinfo sysinfo = { + "Board: BeagleBoard x15\n" +}; + +static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = { + .dmm_lisa_map_3 = 0x80740300, + .is_ma_present = 0x1 +}; + +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) +{ + *dmm_lisa_regs = &beagle_x15_lisa_regs; +} + +static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = { + .sdram_config_init = 0x61851b32, + .sdram_config = 0x61851b32, + .sdram_config2 = 0x00000000, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xceef266b, + .sdram_tim2 = 0x328f7fda, + .sdram_tim3 = 0x027f88a8, + .read_idle_ctrl = 0x00050001, + .zq_config = 0x0007190b, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0e24400a, + .emif_ddr_phy_ctlr_1 = 0x0e24400a, + .emif_ddr_ext_phy_ctrl_1 = 0x10040100, + .emif_ddr_ext_phy_ctrl_2 = 0x00740074, + .emif_ddr_ext_phy_ctrl_3 = 0x00780078, + .emif_ddr_ext_phy_ctrl_4 = 0x007c007c, + .emif_ddr_ext_phy_ctrl_5 = 0x007b007b, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x00000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + +static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = { + 0x00800080, + 0x00360036, + 0x00340034, + 0x00360036, + 0x00350035, + 0x00350035, + + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + + 0x00430043, + 0x003e003e, + 0x004a004a, + 0x00470047, + 0x00400040, + + 0x00000000, + 0x00600020, + 0x40010080, + 0x08102040, + + 0x00400040, + 0x00400040, + 0x00400040, + 0x00400040, + 0x00400040 +}; + +static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = { + .sdram_config_init = 0x61851b32, + .sdram_config = 0x61851b32, + .sdram_config2 = 0x00000000, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xceef266b, + .sdram_tim2 = 0x328f7fda, + .sdram_tim3 = 0x027f88a8, + .read_idle_ctrl = 0x00050001, + .zq_config = 0x0007190b, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0e24400a, + .emif_ddr_phy_ctlr_1 = 0x0e24400a, + .emif_ddr_ext_phy_ctrl_1 = 0x10040100, + .emif_ddr_ext_phy_ctrl_2 = 0x00820082, + .emif_ddr_ext_phy_ctrl_3 = 0x008b008b, + .emif_ddr_ext_phy_ctrl_4 = 0x00800080, + .emif_ddr_ext_phy_ctrl_5 = 0x007e007e, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x00000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + +static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = { + 0x00800080, + 0x00370037, + 0x00390039, + 0x00360036, + 0x00370037, + 0x00350035, + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + 0x00540054, + 0x00540054, + 0x004e004e, + 0x004c004c, + 0x00400040, + + 0x00000000, + 0x00600020, + 0x40010080, + 0x08102040, + + 0x00400040, + 0x00400040, + 0x00400040, + 0x00400040, + 0x00400040 +}; + +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) +{ + switch (emif_nr) { + case 1: + *regs = &beagle_x15_emif1_ddr3_532mhz_emif_regs; + break; + case 2: + *regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs; + break; + } +} + +void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size) +{ + switch (emif_nr) { + case 1: + *regs = beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs; + *size = ARRAY_SIZE(beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs); + break; + case 2: + *regs = beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs; + *size = ARRAY_SIZE(beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs); + break; + } +} + +struct vcores_data beagle_x15_volts = { + .mpu.value = VDD_MPU_DRA752, + .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM, + .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .mpu.addr = TPS659038_REG_ADDR_SMPS12, + .mpu.pmic = &tps659038, + + .eve.value = VDD_EVE_DRA752, + .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM, + .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .eve.addr = TPS659038_REG_ADDR_SMPS45, + .eve.pmic = &tps659038, + + .gpu.value = VDD_GPU_DRA752, + .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM, + .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .gpu.addr = TPS659038_REG_ADDR_SMPS45, + .gpu.pmic = &tps659038, + + .core.value = VDD_CORE_DRA752, + .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM, + .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .core.addr = TPS659038_REG_ADDR_SMPS6, + .core.pmic = &tps659038, + + .iva.value = VDD_IVA_DRA752, + .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM, + .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .iva.addr = TPS659038_REG_ADDR_SMPS45, + .iva.pmic = &tps659038, +}; + +void hw_data_init(void) +{ + *prcm = &dra7xx_prcm; + *dplls_data = &dra7xx_dplls; + *omap_vcores = &beagle_x15_volts; + *ctrl = &dra7xx_ctrl; +} + +int board_init(void) +{ + gpmc_init(); + gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100); + + return 0; +} + +int board_late_init(void) +{ + init_sata(0); + /* + * DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds + * This is the POWERHOLD-in-Low behavior. + */ + palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1); + return 0; +} + +static void do_set_mux32(u32 base, + struct pad_conf_entry const *array, int size) +{ + int i; + struct pad_conf_entry *pad = (struct pad_conf_entry *)array; + + for (i = 0; i < size; i++, pad++) + writel(pad->val, base + pad->offset); +} + +void set_muxconf_regs_essential(void) +{ + do_set_mux32((*ctrl)->control_padconf_core_base, + core_padconf_array_essential, + sizeof(core_padconf_array_essential) / + sizeof(struct pad_conf_entry)); +} + +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); + return 0; +} +#endif + +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT) +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + +#ifdef CONFIG_SPL_ENV_SUPPORT + env_init(); + env_relocate_spec(); + if (getenv_yesno("boot_os") != 1) + return 1; +#endif + + return 0; +} +#endif + +#ifdef CONFIG_DRIVER_TI_CPSW + +/* Delay value to add to calibrated value */ +#define RGMII0_TXCTL_DLY_VAL ((0x3 << 5) + 0x8) +#define RGMII0_TXD0_DLY_VAL ((0x3 << 5) + 0x8) +#define RGMII0_TXD1_DLY_VAL ((0x3 << 5) + 0x2) +#define RGMII0_TXD2_DLY_VAL ((0x4 << 5) + 0x0) +#define RGMII0_TXD3_DLY_VAL ((0x4 << 5) + 0x0) +#define VIN2A_D13_DLY_VAL ((0x3 << 5) + 0x8) +#define VIN2A_D17_DLY_VAL ((0x3 << 5) + 0x8) +#define VIN2A_D16_DLY_VAL ((0x3 << 5) + 0x2) +#define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0) +#define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0) + +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_addr = 1, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_addr = 2, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +int board_eth_init(bd_t *bis) +{ + int ret; + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + uint32_t ctrl_val; + + /* try reading mac address from efuse */ + mac_lo = readl((*ctrl)->control_core_mac_id_0_lo); + mac_hi = readl((*ctrl)->control_core_mac_id_0_hi); + mac_addr[0] = (mac_hi & 0xFF0000) >> 16; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = mac_hi & 0xFF; + mac_addr[3] = (mac_lo & 0xFF0000) >> 16; + mac_addr[4] = (mac_lo & 0xFF00) >> 8; + mac_addr[5] = mac_lo & 0xFF; + + if (!getenv("ethaddr")) { + printf("<ethaddr> not set. Validating first E-fuse MAC\n"); + + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + } + + mac_lo = readl((*ctrl)->control_core_mac_id_1_lo); + mac_hi = readl((*ctrl)->control_core_mac_id_1_hi); + mac_addr[0] = (mac_hi & 0xFF0000) >> 16; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = mac_hi & 0xFF; + mac_addr[3] = (mac_lo & 0xFF0000) >> 16; + mac_addr[4] = (mac_lo & 0xFF00) >> 8; + mac_addr[5] = mac_lo & 0xFF; + + if (!getenv("eth1addr")) { + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("eth1addr", mac_addr); + } + + ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33); + ctrl_val |= 0x22; + writel(ctrl_val, (*ctrl)->control_core_control_io1); + + ret = cpsw_register(&cpsw_data); + if (ret < 0) + printf("Error %d registering CPSW switch\n", ret); + + return ret; +} +#endif + +#ifdef CONFIG_USB_XHCI_OMAP +int board_usb_init(int index, enum usb_init_type init) +{ + setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl, + OTG_SS_CLKCTRL_MODULEMODE_HW | OPTFCLKEN_REFCLK960M); + + return 0; +} +#endif diff --git a/board/ti/beagle_x15/mux_data.h b/board/ti/beagle_x15/mux_data.h new file mode 100644 index 0000000000..2294abec71 --- /dev/null +++ b/board/ti/beagle_x15/mux_data.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Felipe Balbi <balbi@ti.com> + * + * Based on board/ti/dra7xx/evm.c + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _MUX_DATA_BEAGLE_X15_H_ +#define _MUX_DATA_BEAGLE_X15_H_ + +#include <asm/arch/mux_dra7xx.h> + +const struct pad_conf_entry core_padconf_array_essential[] = { + {MMC1_CLK, (IEN | PTU | PDIS | M0)}, /* MMC1_CLK */ + {MMC1_CMD, (IEN | PTU | PDIS | M0)}, /* MMC1_CMD */ + {MMC1_DAT0, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT0 */ + {MMC1_DAT1, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT1 */ + {MMC1_DAT2, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT2 */ + {MMC1_DAT3, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT3 */ + {MMC1_SDCD, (FSC | IEN | PTU | PDIS | M0)}, /* MMC1_SDCD */ + {MMC1_SDWP, (FSC | IEN | PTD | PEN | M14)}, /* MMC1_SDWP */ + {GPMC_A19, (IEN | PTU | PDIS | M1)}, /* mmc2_dat4 */ + {GPMC_A20, (IEN | PTU | PDIS | M1)}, /* mmc2_dat5 */ + {GPMC_A21, (IEN | PTU | PDIS | M1)}, /* mmc2_dat6 */ + {GPMC_A22, (IEN | PTU | PDIS | M1)}, /* mmc2_dat7 */ + {GPMC_A23, (IEN | PTU | PDIS | M1)}, /* mmc2_clk */ + {GPMC_A24, (IEN | PTU | PDIS | M1)}, /* mmc2_dat0 */ + {GPMC_A25, (IEN | PTU | PDIS | M1)}, /* mmc2_dat1 */ + {GPMC_A26, (IEN | PTU | PDIS | M1)}, /* mmc2_dat2 */ + {GPMC_A27, (IEN | PTU | PDIS | M1)}, /* mmc2_dat3 */ + {GPMC_CS1, (IEN | PTU | PDIS | M1)}, /* mmm2_cmd */ + {UART3_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_RXD */ + {UART3_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_TXD */ + {I2C1_SDA, (IEN | PTU | PDIS | M0)}, /* I2C1_SDA */ + {I2C1_SCL, (IEN | PTU | PDIS | M0)}, /* I2C1_SCL */ + {MDIO_MCLK, (PTU | PEN | M0)}, /* MDIO_MCLK */ + {MDIO_D, (IEN | PTU | PEN | M0)}, /* MDIO_D */ + {RGMII0_TXC, (M0) }, + {RGMII0_TXCTL, (M0) }, + {RGMII0_TXD3, (M0) }, + {RGMII0_TXD2, (M0) }, + {RGMII0_TXD1, (M0) }, + {RGMII0_TXD0, (M0) }, + {RGMII0_RXC, (IEN | M0) }, + {RGMII0_RXCTL, (IEN | M0) }, + {RGMII0_RXD3, (IEN | M0) }, + {RGMII0_RXD2, (IEN | M0) }, + {RGMII0_RXD1, (IEN | M0) }, + {RGMII0_RXD0, (IEN | M0) }, + {USB1_DRVVBUS, (M0 | FSC) }, + {SPI1_CS1, (PEN | IDIS | M14) }, /* GPIO7_11 */ +}; +#endif /* _MUX_DATA_BEAGLE_X15_H_ */ diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 37df7b2cad..65222419eb 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -96,18 +96,6 @@ int board_late_init(void) return 0; } -/** - * @brief misc_init_r - Configure EVM board specific configurations - * such as power configurations, ethernet initialization as phase2 of - * boot sequence - * - * @return 0 - */ -int misc_init_r(void) -{ - return 0; -} - static void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size) { diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index 7276014f1d..48240779c9 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -130,8 +130,8 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {GPMC_A13, (IEN | PDIS | M1)}, /* QSPI1_RTCLK */ {GPMC_A14, (IEN | PDIS | M1)}, /* QSPI1_D[3] */ {GPMC_A15, (IEN | PDIS | M1)}, /* QSPI1_D[2] */ - {GPMC_A16, (IEN | PDIS | M1)}, /* QSPI1_D[1] */ - {GPMC_A17, (IEN | PDIS | M1)}, /* QSPI1_D[0] */ + {GPMC_A16, (IEN | PDIS | M1)}, /* QSPI1_D[0] */ + {GPMC_A17, (IEN | PDIS | M1)}, /* QSPI1_D[1] */ {GPMC_A18, (M1)}, /* QSPI1_SCLK */ {GPMC_A3, (IEN | PDIS | M1)}, /* QSPI1_CS2 */ {GPMC_A4, (IEN | PDIS | M1)}, /* QSPI1_CS3 */ diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index 81dd081d76..3f93d9cbe2 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -20,6 +20,7 @@ #include <asm/arch/mmc_host_def.h> #include <asm/gpio.h> #include <i2c.h> +#include <twl4030.h> #include <asm/mach-types.h> #include <linux/mtd/nand.h> #include "evm.h" @@ -264,3 +265,10 @@ int board_mmc_init(bd_t *bis) return omap_mmc_init(0, 0, 0, -1, -1); } #endif + +#if defined(CONFIG_GENERIC_MMC) +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} +#endif diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c index 957940d53f..7171363e76 100644 --- a/board/ti/sdp3430/sdp.c +++ b/board/ti/sdp3430/sdp.c @@ -195,4 +195,9 @@ int board_mmc_init(bd_t *bis) { return omap_mmc_init(0, 0, 0, -1, -1); } + +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} #endif diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index bcbee73d5d..b978044131 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -124,6 +124,13 @@ int board_mmc_init(bd_t *bis) } #endif +#if defined(CONFIG_GENERIC_MMC) +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} +#endif + #if defined(CONFIG_DRIVER_DM9000) & !defined(CONFIG_SPL_BUILD) /* * Routine: board_eth_init diff --git a/common/board_r.c b/common/board_r.c index 19c64271ab..4eb7a023d4 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -291,26 +291,14 @@ static int initr_flash(void) { ulong flash_size = 0; bd_t *bd = gd->bd; - int ok; puts("Flash: "); - if (board_flash_wp_on()) { + if (board_flash_wp_on()) printf("Uninitialized - Write Protect On\n"); - /* Since WP is on, we can't find real size. Set to 0 */ - ok = 1; - } else { + else flash_size = flash_init(); - ok = flash_size > 0; - } - if (!ok) { - puts("*** failed ***\n"); -#ifdef CONFIG_PPC - /* Why does PPC do this? */ - hang(); -#endif - return -1; - } + print_size(flash_size, ""); #ifdef CONFIG_SYS_FLASH_CHECKSUM /* @@ -454,24 +442,6 @@ static int initr_env(void) return 0; } -#ifdef CONFIG_HERMES -static int initr_hermes(void) -{ - if ((gd->board_type >> 16) == 2) - gd->bd->bi_ethspeed = gd->board_type & 0xFFFF; - else - gd->bd->bi_ethspeed = 0xFFFF; - return 0; -} - -static int initr_hermes_start(void) -{ - if (gd->bd->bi_ethspeed != 0xFFFF) - hermes_start_lxt980((int) gd->bd->bi_ethspeed); - return 0; -} -#endif - #ifdef CONFIG_SC3 /* TODO: with new initcalls, move this into the driver */ extern void sc3_read_eeprom(void); @@ -775,7 +745,7 @@ init_fnc_t init_sequence_r[] = { initr_flash, #endif INIT_FUNC_WATCHDOG_RESET -#if defined(CONFIG_PPC) || defined(CONFIG_X86) +#if defined(CONFIG_PPC) /* initialize higher level parts of CPU like time base and timers */ cpu_init_r, #endif @@ -803,9 +773,6 @@ init_fnc_t init_sequence_r[] = { #ifdef CONFIG_SC3 initr_sc3_read_eeprom, #endif -#ifdef CONFIG_HERMES - initr_hermes, -#endif #if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET) mac_read_from_eeprom, #endif @@ -831,18 +798,12 @@ init_fnc_t init_sequence_r[] = { #ifdef CONFIG_MISC_INIT_R misc_init_r, /* miscellaneous platform-dependent init */ #endif -#ifdef CONFIG_HERMES - initr_hermes_start, -#endif INIT_FUNC_WATCHDOG_RESET #ifdef CONFIG_CMD_KGDB initr_kgdb, #endif -#ifdef CONFIG_X86 - board_early_init_r, -#endif interrupt_init, -#if defined(CONFIG_ARM) || defined(CONFIG_x86) +#if defined(CONFIG_ARM) initr_enable_interrupts, #endif #ifdef CONFIG_X86 diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 3d37a86a7d..f0b713c1cf 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -144,9 +144,6 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(5); #endif -#ifdef CONFIG_HERMES - print_mhz("ethspeed", bd->bi_ethspeed); -#endif printf("IP addr = %s\n", getenv("ipaddr")); printf("baudrate = %6u bps\n", gd->baudrate); print_num("relocaddr", gd->relocaddr); diff --git a/common/cmd_fuse.c b/common/cmd_fuse.c index abab9789b0..d4bc0f6c94 100644 --- a/common/cmd_fuse.c +++ b/common/cmd_fuse.c @@ -128,7 +128,7 @@ static int do_fuse(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) err: puts("ERROR\n"); - return ret; + return CMD_RET_FAILURE; } U_BOOT_CMD( diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 0d50dcfe9c..bcb3ee325a 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -19,6 +19,7 @@ #include <dataflash.h> #endif #include <hash.h> +#include <inttypes.h> #include <watchdog.h> #include <asm/io.h> #include <linux/compiler.h> @@ -338,7 +339,8 @@ static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (word1 != word2) { ulong offset = buf1 - base; #ifdef CONFIG_SYS_SUPPORT_64BIT_DATA - printf("%s at 0x%p (%#0*llx) != %s at 0x%p (%#0*llx)\n", + printf("%s at 0x%p (%#0*"PRIx64") != %s at 0x%p (%#0*" + PRIx64 ")\n", type, (void *)(addr1 + offset), size, word1, type, (void *)(addr2 + offset), size, word2); #else @@ -1146,7 +1148,7 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) printf(" %08x", *((u32 *)ptr)); #ifdef CONFIG_SYS_SUPPORT_64BIT_DATA else if (size == 8) - printf(" %016llx", *((u64 *)ptr)); + printf(" %016" PRIx64, *((u64 *)ptr)); #endif else if (size == 2) printf(" %04x", *((u16 *)ptr)); diff --git a/common/console.c b/common/console.c index 4695386a33..29560c3ebe 100644 --- a/common/console.c +++ b/common/console.c @@ -125,12 +125,12 @@ static int console_setfile(int file, struct stdio_dev * dev) */ switch (file) { case stdin: - gd->jt[XF_getc] = dev->getc; - gd->jt[XF_tstc] = dev->tstc; + gd->jt[XF_getc] = getc; + gd->jt[XF_tstc] = tstc; break; case stdout: - gd->jt[XF_putc] = dev->putc; - gd->jt[XF_puts] = dev->puts; + gd->jt[XF_putc] = putc; + gd->jt[XF_puts] = puts; gd->jt[XF_printf] = printf; break; } diff --git a/common/fdt_support.c b/common/fdt_support.c index ea42c63eaa..8266bca7d6 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -8,6 +8,7 @@ */ #include <common.h> +#include <inttypes.h> #include <stdio_dev.h> #include <linux/ctype.h> #include <linux/types.h> @@ -370,22 +371,22 @@ static int fdt_pack_reg(const void *fdt, void *buf, u64 *address, u64 *size, int n) { int i; - int address_len = fdt_address_cells(fdt, 0); - int size_len = fdt_size_cells(fdt, 0); + int address_cells = fdt_address_cells(fdt, 0); + int size_cells = fdt_size_cells(fdt, 0); char *p = buf; for (i = 0; i < n; i++) { - if (address_len == 2) + if (address_cells == 2) *(fdt64_t *)p = cpu_to_fdt64(address[i]); else *(fdt32_t *)p = cpu_to_fdt32(address[i]); - p += address_len; + p += 4 * address_cells; - if (size_len == 2) + if (size_cells == 2) *(fdt64_t *)p = cpu_to_fdt64(size[i]); else *(fdt32_t *)p = cpu_to_fdt32(size[i]); - p += size_len; + p += 4 * size_cells; } return p - (char *)buf; @@ -914,8 +915,6 @@ void fdt_del_node_and_alias(void *blob, const char *alias) fdt_delprop(blob, off, alias); } -#define PRu64 "%llx" - /* Max address size we deal with */ #define OF_MAX_ADDR_CELLS 4 #define OF_BAD_ADDR ((u64)-1) @@ -973,8 +972,8 @@ static u64 of_bus_default_map(fdt32_t *addr, const fdt32_t *range, s = of_read_number(range + na + pna, ns); da = of_read_number(addr, na); - debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n", - cp, s, da); + debug("OF: default map, cp=%" PRIu64 ", s=%" PRIu64 + ", da=%" PRIu64 "\n", cp, s, da); if (da < cp || da >= (cp + s)) return OF_BAD_ADDR; @@ -1052,7 +1051,7 @@ static int of_translate_one(void * blob, int parent, struct of_bus *bus, finish: of_dump_addr("OF: parent translation for:", addr, pna); - debug("OF: with offset: "PRu64"\n", offset); + debug("OF: with offset: %" PRIu64 "\n", offset); /* Translate it into parent bus space */ return pbus->translate(addr, offset, pna); @@ -1381,9 +1380,9 @@ int fdt_verify_alias_address(void *fdt, int anode, const char *alias, u64 addr) dt_addr = fdt_translate_address(fdt, node, reg); if (addr != dt_addr) { - printf("Warning: U-Boot configured device %s at address %llx,\n" - " but the device tree has it address %llx.\n", - alias, addr, dt_addr); + printf("Warning: U-Boot configured device %s at address %" + PRIx64 ",\n but the device tree has it address %" + PRIx64 ".\n", alias, addr, dt_addr); return 0; } diff --git a/common/image-fdt.c b/common/image-fdt.c index 1d76bd60da..e3f06cdd1a 100644 --- a/common/image-fdt.c +++ b/common/image-fdt.c @@ -237,6 +237,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, int fdt_noffset; #endif const char *select = NULL; + int ok_no_fdt = 0; *of_flat_tree = NULL; *of_size = 0; @@ -309,7 +310,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, fdt_addr); fdt_hdr = image_get_fdt(fdt_addr); if (!fdt_hdr) - goto error; + goto no_fdt; /* * move image data to the load address, @@ -379,7 +380,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, break; default: puts("ERROR: Did not find a cmdline Flattened Device Tree\n"); - goto error; + goto no_fdt; } printf(" Booting using the fdt blob at %#08lx\n", fdt_addr); @@ -413,11 +414,11 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, } } else { debug("## No Flattened Device Tree\n"); - goto error; + goto no_fdt; } } else { debug("## No Flattened Device Tree\n"); - goto error; + goto no_fdt; } *of_flat_tree = fdt_blob; @@ -427,9 +428,15 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, return 0; +no_fdt: + ok_no_fdt = 1; error: *of_flat_tree = NULL; *of_size = 0; + if (!select && ok_no_fdt) { + debug("Continuing to boot without FDT\n"); + return 0; + } return 1; } diff --git a/common/lcd.c b/common/lcd.c index 28b3fe7918..3ed504df50 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -530,7 +530,7 @@ static int lcd_init(void *lcdbase) lcd_ctrl_init(lcdbase); /* - * lcd_ctrl_init() of some drivers (i.e. bcm2835 on rpi_b) ignores + * lcd_ctrl_init() of some drivers (i.e. bcm2835 on rpi) ignores * the 'lcdbase' argument and uses custom lcd base address * by setting up gd->fb_base. Check for this condition and fixup * 'lcd_base' address. diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index ee71f793a6..7bae16beba 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -15,7 +15,7 @@ DECLARE_GLOBAL_DATA_PTR; -static int mmc_load_image_raw(struct mmc *mmc, unsigned long sector) +static int mmc_load_image_raw_sector(struct mmc *mmc, unsigned long sector) { unsigned long err; u32 image_size_sectors; @@ -51,6 +51,22 @@ end: return (err == 0); } +#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION +static int mmc_load_image_raw_partition(struct mmc *mmc, int partition) +{ + disk_partition_t info; + + if (get_partition_info(&mmc->block_dev, partition, &info)) { +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT + printf("spl: partition error\n"); +#endif + return -1; + } + + return mmc_load_image_raw_sector(mmc, info.start); +} +#endif + #ifdef CONFIG_SPL_OS_BOOT static int mmc_load_image_raw_os(struct mmc *mmc) { @@ -64,7 +80,8 @@ static int mmc_load_image_raw_os(struct mmc *mmc) return -1; } - return mmc_load_image_raw(mmc, CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR); + return mmc_load_image_raw_sector(mmc, + CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR); } #endif @@ -98,18 +115,24 @@ void spl_mmc_load_image(void) #ifdef CONFIG_SPL_OS_BOOT if (spl_start_uboot() || mmc_load_image_raw_os(mmc)) #endif - err = mmc_load_image_raw(mmc, +#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION + err = mmc_load_image_raw_partition(mmc, + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION); +#else + err = mmc_load_image_raw_sector(mmc, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); +#endif #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) - } else if (boot_mode == MMCSD_MODE_FS) { + } + if (err || boot_mode == MMCSD_MODE_FS) { debug("boot mode - FS\n"); #ifdef CONFIG_SPL_FAT_SUPPORT #ifdef CONFIG_SPL_OS_BOOT if (spl_start_uboot() || spl_load_image_fat_os(&mmc->block_dev, - CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION)) + CONFIG_SYS_MMCSD_FS_BOOT_PARTITION)) #endif err = spl_load_image_fat(&mmc->block_dev, - CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION, + CONFIG_SYS_MMCSD_FS_BOOT_PARTITION, CONFIG_SPL_FS_LOAD_PAYLOAD_NAME); if(err) #endif /* CONFIG_SPL_FAT_SUPPORT */ @@ -117,10 +140,10 @@ void spl_mmc_load_image(void) #ifdef CONFIG_SPL_EXT_SUPPORT #ifdef CONFIG_SPL_OS_BOOT if (spl_start_uboot() || spl_load_image_ext_os(&mmc->block_dev, - CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION)) + CONFIG_SYS_MMCSD_FS_BOOT_PARTITION)) #endif err = spl_load_image_ext(&mmc->block_dev, - CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION, + CONFIG_SYS_MMCSD_FS_BOOT_PARTITION, CONFIG_SPL_FS_LOAD_PAYLOAD_NAME); #endif /* CONFIG_SPL_EXT_SUPPORT */ } @@ -146,7 +169,7 @@ void spl_mmc_load_image(void) #ifdef CONFIG_SPL_OS_BOOT if (spl_start_uboot() || mmc_load_image_raw_os(mmc)) #endif - err = mmc_load_image_raw(mmc, + err = mmc_load_image_raw_sector(mmc, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); #endif } else { diff --git a/common/usb.c b/common/usb.c index 7d33a0f086..736cd9f009 100644 --- a/common/usb.c +++ b/common/usb.c @@ -33,7 +33,6 @@ #include <linux/ctype.h> #include <asm/byteorder.h> #include <asm/unaligned.h> -#include <compiler.h> #include <errno.h> #include <usb.h> #ifdef CONFIG_4xx diff --git a/configs/beagle_x15_defconfig b/configs/beagle_x15_defconfig new file mode 100644 index 0000000000..872ab63bdd --- /dev/null +++ b/configs/beagle_x15_defconfig @@ -0,0 +1,5 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3" ++S:CONFIG_ARM=y ++S:CONFIG_OMAP54XX=y ++S:CONFIG_TARGET_BEAGLE_X15=y diff --git a/configs/hermes_defconfig b/configs/hermes_defconfig deleted file mode 100644 index a923a6153e..0000000000 --- a/configs/hermes_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_8xx=y -CONFIG_TARGET_HERMES=y diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index f54b15fa30..315534065d 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -1,7 +1,34 @@ CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_LD4=y ++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BDI=y +CONFIG_CMD_CONSOLE=y +CONFIG_CMD_BOOTD=y +CONFIG_CMD_RUN=y +CONFIG_CMD_IMI=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_EDITENV=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_MEMORY=y +CONFIG_CMD_LOADB=y +CONFIG_CMD_LOADS=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_NET=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_NFS=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref" CONFIG_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index e7957520fb..7ea4e6e879 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -1,7 +1,34 @@ CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_PRO4=y ++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BDI=y +CONFIG_CMD_CONSOLE=y +CONFIG_CMD_BOOTD=y +CONFIG_CMD_RUN=y +CONFIG_CMD_IMI=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_EDITENV=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_MEMORY=y +CONFIG_CMD_LOADB=y +CONFIG_CMD_LOADS=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_NET=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_NFS=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref" CONFIG_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index 65109374b7..ddf210cc0d 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -1,7 +1,34 @@ CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_UNIPHIER=y +S:CONFIG_MACH_PH1_SLD8=y ++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BDI=y +CONFIG_CMD_CONSOLE=y +CONFIG_CMD_BOOTD=y +CONFIG_CMD_RUN=y +CONFIG_CMD_IMI=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_EDITENV=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_MEMORY=y +CONFIG_CMD_LOADB=y +CONFIG_CMD_LOADS=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_NET=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_NFS=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref" CONFIG_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y diff --git a/configs/rpi_b_defconfig b/configs/rpi_b_defconfig deleted file mode 100644 index 9a4705ed14..0000000000 --- a/configs/rpi_b_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_RPI_B=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig new file mode 100644 index 0000000000..9379cf00d4 --- /dev/null +++ b/configs/rpi_defconfig @@ -0,0 +1,2 @@ +CONFIG_ARM=y +CONFIG_TARGET_RPI=y diff --git a/disk/part_efi.c b/disk/part_efi.c index 612f0926b6..efed58f81d 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -14,6 +14,7 @@ #include <common.h> #include <command.h> #include <ide.h> +#include <inttypes.h> #include <malloc.h> #include <part_efi.h> #include <linux/ctype.h> @@ -553,28 +554,28 @@ static int is_gpt_valid(block_dev_desc_t *dev_desc, u64 lba, /* Check that the my_lba entry points to the LBA that contains the GPT */ if (le64_to_cpu(pgpt_head->my_lba) != lba) { - printf("GPT: my_lba incorrect: %llX != %llX\n", - le64_to_cpu(pgpt_head->my_lba), - lba); + printf("GPT: my_lba incorrect: %llX != %" PRIX64 "\n", + le64_to_cpu(pgpt_head->my_lba), + lba); return 0; } /* Check the first_usable_lba and last_usable_lba are within the disk. */ lastlba = (u64)dev_desc->lba; if (le64_to_cpu(pgpt_head->first_usable_lba) > lastlba) { - printf("GPT: first_usable_lba incorrect: %llX > %llX\n", - le64_to_cpu(pgpt_head->first_usable_lba), lastlba); + printf("GPT: first_usable_lba incorrect: %llX > %" PRIX64 "\n", + le64_to_cpu(pgpt_head->first_usable_lba), lastlba); return 0; } if (le64_to_cpu(pgpt_head->last_usable_lba) > lastlba) { - printf("GPT: last_usable_lba incorrect: %llX > %llX\n", - le64_to_cpu(pgpt_head->last_usable_lba), lastlba); + printf("GPT: last_usable_lba incorrect: %llX > %" PRIX64 "\n", + le64_to_cpu(pgpt_head->last_usable_lba), lastlba); return 0; } - debug("GPT: first_usable_lba: %llX last_usable_lba %llX last lba %llX\n", - le64_to_cpu(pgpt_head->first_usable_lba), - le64_to_cpu(pgpt_head->last_usable_lba), lastlba); + debug("GPT: first_usable_lba: %llX last_usable_lba %llX last lba %" + PRIX64 "\n", le64_to_cpu(pgpt_head->first_usable_lba), + le64_to_cpu(pgpt_head->last_usable_lba), lastlba); /* Read and allocate Partition Table Entries */ *pgpt_pte = alloc_read_gpt_entries(dev_desc, pgpt_head); diff --git a/doc/README.clang b/doc/README.clang index 52495d3116..fe36909449 100644 --- a/doc/README.clang +++ b/doc/README.clang @@ -28,7 +28,7 @@ sudo apt-get install clang To compile U-Boot with clang on linux without IAS use e.g.: export TRIPLET=arm-linux-gnueabi && export CROSS_COMPILE="$TRIPLET-" -make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" rpi_b_defconfig +make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" rpi_defconfig make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" all V=1 -j8 FreeBSD 11 (Current): @@ -42,7 +42,7 @@ ln -s /usr/local/bin/arm-gnueabi-freebsd-as /usr/bin/arm-freebsd-eabi-as # The following commands compile U-Boot using the clang xdev toolchain. # NOTE: CROSS_COMPILE and target differ on purpose! export CROSS_COMPILE=arm-gnueabi-freebsd- -gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" rpi_b_defconfig +gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" rpi_defconfig gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" -j8 Given that u-boot will default to gcc, above commands can be diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 8ba6e0ae65..deb4af482b 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,8 +12,9 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -PRS200 powerpc mpc5200 - - -MCC200 powerpc mpc5200 - - +hermes powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> +PRS200 powerpc mpc5200 ecfdcee 2014-11-12 +MCC200 powerpc mpc5200 ecfdcee 2014-11-12 TOP5200 powerpc mpc5200 d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de> TOP860 powerpc mpc860 d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de> TOP9000 arm at91sam9xeXXX d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de> diff --git a/doc/device-tree-bindings/ata/intel-sata.txt b/doc/device-tree-bindings/ata/intel-sata.txt new file mode 100644 index 0000000000..5e4da832a3 --- /dev/null +++ b/doc/device-tree-bindings/ata/intel-sata.txt @@ -0,0 +1,26 @@ +Intel Pantherpoint SATA Device Binding +====================================== + +The device tree node which describes the operation of the Intel Pantherpoint +SATA device is as follows: + +Required properties : +- compatible = "intel,pantherpoint-ahci" +- intel,sata-mode : string, one of: + "ahci" : Use AHCI mode (default) + "combined" : Use combined IDE + legacy mode + "plain-ide" : Use plain IDE mode +- intel,sata-port-map : Which SATA ports are enabled, bit 0=enable first port, + bit 1=enable second port, etc. +- intel,sata-port0-gen3-tx : Value for the IOBP_SP0G3IR register +- intel,sata-port1-gen3-tx : Value for the IOBP_SP1G3IR register + +Example +------- + +sata { + compatible = "intel,pantherpoint-ahci"; + intel,sata-mode = "ahci"; + intel,sata-port-map = <1>; + intel,sata-port0-gen3-tx = <0x00880a7f>; +}; diff --git a/doc/device-tree-bindings/misc/intel-lpc.txt b/doc/device-tree-bindings/misc/intel-lpc.txt index 7e1b389237..ba6ca9dbc7 100644 --- a/doc/device-tree-bindings/misc/intel-lpc.txt +++ b/doc/device-tree-bindings/misc/intel-lpc.txt @@ -6,10 +6,37 @@ Count device is as follows: Required properties : - compatible = "intel,lpc" -- gen-dec : Specifies the values for the gen-dec registers. Up to four cell - pairs can be provided - the first of each pair is the base address and +- intel,alt-gp-smi-enable : Enable SMI sources. This cell is written to the + ALT_GP_SMI_EN register +- intel,gen-dec : Specifies the values for the gen-dec registers. Up to four + cell pairs can be provided - the first of each pair is the base address and the second is the size. These are written into the GENx_DEC registers of the LPC device +- intel,gpi-routing : Specifies the GPI routing. There are 16 cells, valid + values are: + 0 No effect (default) + 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + 2 SCI (if corresponding GPIO_EN bit is also set) +- intel,pirq-routing : Speciffies the routing IRQ number for each of PIRQA-H, + one cell for each. + 0x00 - 0000 = Reserved + 0x01 - 0001 = Reserved + 0x02 - 0010 = Reserved + 0x03 - 0011 = IRQ3 + 0x04 - 0100 = IRQ4 + 0x05 - 0101 = IRQ5 + 0x06 - 0110 = IRQ6 + 0x07 - 0111 = IRQ7 + 0x08 - 1000 = Reserved + 0x09 - 1001 = IRQ9 + 0x0A - 1010 = IRQ10 + 0x0B - 1011 = IRQ11 + 0x0C - 1100 = IRQ12 + 0x0D - 1101 = Reserved + 0x0E - 1110 = IRQ14 + 0x0F - 1111 = IRQ15 + PIRQ[n]_ROUT[7] - PIRQ Routing Control + 0x80 - The PIRQ is not routed. Example @@ -19,5 +46,19 @@ lpc { compatible = "intel,lpc"; #address-cells = <1>; #size-cells = <1>; - gen-dec = <0x800 0xfc 0x900 0xfc>; + intel,gen-dec = <0x800 0xfc 0x900 0xfc>; + + intel,pirq-routing = <0x8b 0x8a 0x8b 0x8b + 0x80 0x80 0x80 0x80>; + /* + * GPI routing + * 0 No effect (default) + * 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is + * also set) + * 2 SCI (if corresponding GPIO_EN bit is also set) + */ + intel,gpi-routing = <0 0 0 0 0 0 0 2 + 1 0 0 0 0 0 0 0>; + /* Enable EC SMI source */ + intel,alt-gp-smi-enable = <0x0100>; }; diff --git a/doc/device-tree-bindings/video/intel-gma.txt b/doc/device-tree-bindings/video/intel-gma.txt new file mode 100644 index 0000000000..914be4fedd --- /dev/null +++ b/doc/device-tree-bindings/video/intel-gma.txt @@ -0,0 +1,40 @@ +Intel GMA Bindings +================== + +This is the Intel Graphics Media Accelerator. This binding supports selection +of display parameters only. + + +Required properties: + - compatible : "intel,gma"; + +Optional properties: + - intel,dp-hotplug : values for digital port hotplug, one cell per value for + ports B, C and D + - intel,panel-port-select : output port to use: 0=LVDS 1=DP_B 2=DP_C 3=DP_D + - intel,panel-power-cycle-delay : T4 time sequence (6 = 500ms) + + The following delays are in units of 0.1ms: + - intel,panel-power-up-delay : T1+T2 time sequence + - intel,panel-power-down-delay : T3 time sequence + - intel,panel-power-backlight-on-delay : T5 time sequence + - intel,panel-power-backlight-off-delay : Tx time sequence + + - intel,cpu-backlight : Value for CPU Backlight PWM + - intel,pch-backlight : Value for PCH Backlight PWM + +Example +------- + +gma { + compatible = "intel,gma"; + intel,dp_hotplug = <0 0 0x06>; + intel,panel-port-select = <1>; + intel,panel-power-cycle-delay = <6>; + intel,panel-power-up-delay = <2000>; + intel,panel-power-down-delay = <500>; + intel,panel-power-backlight-on-delay = <2000>; + intel,panel-power-backlight-off-delay = <2000>; + intel,cpu-backlight = <0x00000200>; + intel,pch-backlight = <0x04000000>; +}; diff --git a/doc/git-mailrc b/doc/git-mailrc index ad22763960..6c79a6d930 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -14,6 +14,9 @@ alias aaribaud Albert Aribaud <albert.u.boot@aribaud.net> alias abiessmann Andreas Bießmann <andreas.devel@googlemail.com> alias afleming Andy Fleming <afleming@gmail.com> alias ag Anatolij Gustschin <agust@denx.de> +alias alisonwang Alison Wang <alison.wang@freescale.com> +alias angelo_ts Angelo Dureghello <angelo@sysam.it> +alias danielschwierzeck Daniel Schwierzeck <daniel.schwierzeck@gmail.com> alias galak Kumar Gala <galak@kernel.crashing.org> alias gruss Graeme Russ <graeme.russ@gmail.com> alias hs Heiko Schocher <hs@denx.de> @@ -72,13 +75,13 @@ alias avr32 uboot, abiessmann alias bfin uboot, vapier, sonic alias blackfin bfin -alias m68k uboot, jasonjin +alias m68k uboot, alisonwang, angelo_ts alias coldfire m68k alias microblaze uboot, monstr alias mb microblaze -alias mips uboot, Shinya Kuribayashi <skuribay@pobox.com> +alias mips uboot, danielschwierzeck alias nds32 uboot, macpaul @@ -119,6 +122,7 @@ alias mmc uboot, panto alias nand uboot, scottwood alias net uboot, jhersh alias spi uboot, jagan +alias ubi uboot, hs alias usb uboot, marex alias video uboot, ag alias patman uboot, sjg diff --git a/drivers/bios_emulator/Makefile b/drivers/bios_emulator/Makefile index e56356ee86..2ba43ac731 100644 --- a/drivers/bios_emulator/Makefile +++ b/drivers/bios_emulator/Makefile @@ -9,4 +9,4 @@ obj-y = atibios.o biosemu.o besys.o bios.o \ $(X86DIR)/debug.o ccflags-y := -I$(srctree)/$(src) -I$(srctree)/$(src)/include \ - -D__PPC__ -D__BIG_ENDIAN__ + $(if $(CONFIG_PPC),-D__PPC__ -D__BIG_ENDIAN__) diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c index 3b2ed6e109..93b815ccb4 100644 --- a/drivers/bios_emulator/atibios.c +++ b/drivers/bios_emulator/atibios.c @@ -46,8 +46,11 @@ * BIOS in u-boot. ****************************************************************************/ #include <common.h> -#include "biosemui.h" +#include <bios_emul.h> +#include <errno.h> #include <malloc.h> +#include <vbe.h> +#include "biosemui.h" /* Length of the BIOS image */ #define MAX_BIOSLEN (128 * 1024L) @@ -59,17 +62,54 @@ static u32 saveBaseAddress14; static u32 saveBaseAddress18; static u32 saveBaseAddress20; +static void atibios_set_vesa_mode(RMREGS *regs, int vesa_mode, + struct vbe_mode_info *mode_info) +{ + debug("VBE: Setting VESA mode %#04x\n", vesa_mode); + /* request linear framebuffer mode */ + vesa_mode |= (1 << 14); + /* request clearing of framebuffer */ + vesa_mode &= ~(1 << 15); + regs->e.eax = VESA_SET_MODE; + regs->e.ebx = vesa_mode; + BE_int86(0x10, regs, regs); + + int offset = 0x2000; + void *buffer = (void *)(M.mem_base + offset); + + u16 buffer_seg = (((unsigned long)offset) >> 4) & 0xff00; + u16 buffer_adr = ((unsigned long)offset) & 0xffff; + regs->e.eax = VESA_GET_MODE_INFO; + regs->e.ebx = 0; + regs->e.ecx = vesa_mode; + regs->e.edx = 0; + regs->e.esi = buffer_seg; + regs->e.edi = buffer_adr; + BE_int86(0x10, regs, regs); + memcpy(mode_info->mode_info_block, buffer, + sizeof(struct vbe_mode_info)); + mode_info->valid = true; + + vesa_mode |= (1 << 14); + /* request clearing of framebuffer */ + vesa_mode &= ~(1 << 15); + regs->e.eax = VESA_SET_MODE; + regs->e.ebx = vesa_mode; + BE_int86(0x10, regs, regs); +} + /**************************************************************************** PARAMETERS: pcidev - PCI device info for the video card on the bus to boot -VGAInfo - BIOS emulator VGA info structure +vga_info - BIOS emulator VGA info structure REMARKS: This function executes the BIOS POST code on the controller. We assume that at this stage the controller has its I/O and memory space enabled and that all other controllers are in a disabled state. ****************************************************************************/ -static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) +static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info, + int vesa_mode, struct vbe_mode_info *mode_info) { RMREGS regs; RMSREGS sregs; @@ -84,13 +124,16 @@ static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) ((int)PCI_DEV(pcidev) << 3) | (int)PCI_FUNC(pcidev); /*Setup the X86 emulator for the VGA BIOS*/ - BE_setVGA(VGAInfo); + BE_setVGA(vga_info); /*Execute the BIOS POST code*/ BE_callRealMode(0xC000, 0x0003, ®s, &sregs); /*Cleanup and exit*/ - BE_getVGA(VGAInfo); + BE_getVGA(vga_info); + + if (vesa_mode != -1) + atibios_set_vesa_mode(®s, vesa_mode, mode_info); } /**************************************************************************** @@ -244,60 +287,61 @@ REMARKS: Loads and POST's the display controllers BIOS, directly from the BIOS image we can extract over the PCI bus. ****************************************************************************/ -static int PCI_postController(pci_dev_t pcidev, BE_VGAInfo * VGAInfo) +static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len, + BE_VGAInfo *vga_info, int vesa_mode, + struct vbe_mode_info *mode_info) { - u32 BIOSImageLen; - uchar *mappedBIOS; - uchar *copyOfBIOS; - - /*Allocate memory to store copy of BIOS from display controller*/ - if ((mappedBIOS = PCI_mapBIOSImage(pcidev)) == NULL) { - printf("videoboot: Video ROM failed to map!\n"); - return false; - } + u32 bios_image_len; + uchar *mapped_bios; + uchar *copy_of_bios; + + if (bios_rom) { + copy_of_bios = bios_rom; + bios_image_len = bios_len; + } else { + /* + * Allocate memory to store copy of BIOS from display + * controller + */ + mapped_bios = PCI_mapBIOSImage(pcidev); + if (mapped_bios == NULL) { + printf("videoboot: Video ROM failed to map!\n"); + return false; + } - BIOSImageLen = mappedBIOS[2] * 512; + bios_image_len = mapped_bios[2] * 512; - if ((copyOfBIOS = malloc(BIOSImageLen)) == NULL) { - printf("videoboot: Out of memory!\n"); - return false; + copy_of_bios = malloc(bios_image_len); + if (copy_of_bios == NULL) { + printf("videoboot: Out of memory!\n"); + return false; + } + memcpy(copy_of_bios, mapped_bios, bios_image_len); + PCI_unmapBIOSImage(pcidev, mapped_bios); } - memcpy(copyOfBIOS, mappedBIOS, BIOSImageLen); - PCI_unmapBIOSImage(pcidev, mappedBIOS); - - /*Save information in VGAInfo structure*/ - VGAInfo->function = PCI_FUNC(pcidev); - VGAInfo->device = PCI_DEV(pcidev); - VGAInfo->bus = PCI_BUS(pcidev); - VGAInfo->pcidev = pcidev; - VGAInfo->BIOSImage = copyOfBIOS; - VGAInfo->BIOSImageLen = BIOSImageLen; + /*Save information in vga_info structure*/ + vga_info->function = PCI_FUNC(pcidev); + vga_info->device = PCI_DEV(pcidev); + vga_info->bus = PCI_BUS(pcidev); + vga_info->pcidev = pcidev; + vga_info->BIOSImage = copy_of_bios; + vga_info->BIOSImageLen = bios_image_len; /*Now execute the BIOS POST for the device*/ - if (copyOfBIOS[0] != 0x55 || copyOfBIOS[1] != 0xAA) { + if (copy_of_bios[0] != 0x55 || copy_of_bios[1] != 0xAA) { printf("videoboot: Video ROM image is invalid!\n"); return false; } - PCI_doBIOSPOST(pcidev, VGAInfo); + PCI_doBIOSPOST(pcidev, vga_info, vesa_mode, mode_info); /*Reset the size of the BIOS image to the final size*/ - VGAInfo->BIOSImageLen = copyOfBIOS[2] * 512; + vga_info->BIOSImageLen = copy_of_bios[2] * 512; return true; } -/**************************************************************************** -PARAMETERS: -pcidev - PCI device info for the video card on the bus to boot -pVGAInfo - Place to return VGA info structure is requested -cleanUp - true to clean up on exit, false to leave emulator active - -REMARKS: -Boots the PCI/AGP video card on the bus using the Video ROM BIOS image -and the X86 BIOS emulator module. -****************************************************************************/ -int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp) +int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **vga_infop) { BE_VGAInfo *VGAInfo; @@ -307,28 +351,70 @@ int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp) /*Initialise the x86 BIOS emulator*/ if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) { printf("videoboot: Out of memory!\n"); - return false; + return -ENOMEM; } memset(VGAInfo, 0, sizeof(*VGAInfo)); BE_init(0, 65536, VGAInfo, 0); + *vga_infop = VGAInfo; - /*Post all the display controller BIOS'es*/ - if (!PCI_postController(pcidev, VGAInfo)) - return false; + return 0; +} - /*Cleanup and exit the emulator if requested. If the BIOS emulator - is needed after booting the card, we will not call BE_exit and - leave it enabled for further use (ie: VESA driver etc). +void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void)) +{ + X86EMU_setupIntrFunc(intnum, (X86EMU_intrFuncs)int_func); +} + +int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len, + BE_VGAInfo *vga_info, int clean_up, int vesa_mode, + struct vbe_mode_info *mode_info) +{ + /*Post all the display controller BIOS'es*/ + if (!PCI_postController(pcidev, bios_rom, bios_len, vga_info, + vesa_mode, mode_info)) + return -EINVAL; + + /* + * Cleanup and exit the emulator if requested. If the BIOS emulator + * is needed after booting the card, we will not call BE_exit and + * leave it enabled for further use (ie: VESA driver etc). */ - if (cleanUp) { + if (clean_up) { BE_exit(); - if (VGAInfo->BIOSImage) - free(VGAInfo->BIOSImage); - free(VGAInfo); - VGAInfo = NULL; + if (vga_info->BIOSImage) + free(vga_info->BIOSImage); + free(vga_info); + vga_info = NULL; } - /*Return VGA info pointer if the caller requested it*/ + + return 0; +} + +/**************************************************************************** +PARAMETERS: +pcidev - PCI device info for the video card on the bus to boot +pVGAInfo - Place to return VGA info structure is requested +cleanUp - true to clean up on exit, false to leave emulator active + +REMARKS: +Boots the PCI/AGP video card on the bus using the Video ROM BIOS image +and the X86 BIOS emulator module. +****************************************************************************/ +int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up) +{ + BE_VGAInfo *VGAInfo; + int ret; + + ret = biosemu_setup(pcidev, &VGAInfo); + if (ret) + return false; + ret = biosemu_run(pcidev, NULL, 0, VGAInfo, clean_up, -1, NULL); + if (ret) + return false; + + /* Return VGA info pointer if the caller requested it*/ if (pVGAInfo) *pVGAInfo = VGAInfo; + return true; } diff --git a/drivers/bios_emulator/besys.c b/drivers/bios_emulator/besys.c index ad88a53f0c..752a928f66 100644 --- a/drivers/bios_emulator/besys.c +++ b/drivers/bios_emulator/besys.c @@ -54,12 +54,20 @@ /*------------------------- Global Variables ------------------------------*/ -#ifndef __i386__ +#ifndef CONFIG_X86EMU_RAW_IO static char *BE_biosDate = "08/14/99"; static u8 BE_model = 0xFC; static u8 BE_submodel = 0x00; #endif +#undef DEBUG_IO_ACCESS + +#ifdef DEBUG_IO_ACCESS +#define debug_io(fmt, ...) printf(fmt, ##__VA_ARGS__) +#else +#define debug_io(x, b...) +#endif + /*----------------------------- Implementation ----------------------------*/ /**************************************************************************** @@ -80,38 +88,40 @@ static u8 *BE_memaddr(u32 addr) if (addr >= 0xC0000 && addr <= _BE_env.biosmem_limit) { return (u8*)(_BE_env.biosmem_base + addr - 0xC0000); } else if (addr > _BE_env.biosmem_limit && addr < 0xD0000) { - DB(printf("BE_memaddr: address %#lx may be invalid!\n", addr);) - return M.mem_base; + DB(printf("BE_memaddr: address %#lx may be invalid!\n", + (ulong)addr);) + return (u8 *)M.mem_base; } else if (addr >= 0xA0000 && addr <= 0xBFFFF) { return (u8*)(_BE_env.busmem_base + addr - 0xA0000); } -#ifdef __i386__ +#ifdef CONFIG_X86EMU_RAW_IO else if (addr >= 0xD0000 && addr <= 0xFFFFF) { /* We map the real System BIOS directly on real PC's */ - DB(printf("BE_memaddr: System BIOS address %#lx\n", addr);) - return _BE_env.busmem_base + addr - 0xA0000; + DB(printf("BE_memaddr: System BIOS address %#lx\n", + (ulong)addr);) + return (u8 *)_BE_env.busmem_base + addr - 0xA0000; } #else else if (addr >= 0xFFFF5 && addr < 0xFFFFE) { /* Return a faked BIOS date string for non-x86 machines */ - DB(printf("BE_memaddr - Returning BIOS date\n");) + debug_io("BE_memaddr - Returning BIOS date\n"); return (u8 *)(BE_biosDate + addr - 0xFFFF5); } else if (addr == 0xFFFFE) { /* Return system model identifier for non-x86 machines */ - DB(printf("BE_memaddr - Returning model\n");) + debug_io("BE_memaddr - Returning model\n"); return &BE_model; } else if (addr == 0xFFFFF) { /* Return system submodel identifier for non-x86 machines */ - DB(printf("BE_memaddr - Returning submodel\n");) + debug_io("BE_memaddr - Returning submodel\n"); return &BE_submodel; } #endif else if (addr > M.mem_size - 1) { HALT_SYS(); - return M.mem_base; + return (u8 *)M.mem_base; } - return M.mem_base + addr; + return (u8 *)(M.mem_base + addr); } /**************************************************************************** @@ -230,7 +240,7 @@ void X86API BE_wrl(u32 addr, u32 val) } } -#if defined(DEBUG) || !defined(__i386__) +#if !defined(CONFIG_X86EMU_RAW_IO) /* For Non-Intel machines we may need to emulate some I/O port accesses that * the BIOS may try to access, such as the PCI config registers. @@ -258,6 +268,7 @@ static u8 VGA_inpb (const int port) { u8 val = 0xff; + debug_io("vga_inb.%04X -> ", (u16) port); switch (port) { case 0x3C0: /* 3C0 has funky characteristics because it can act as either @@ -560,7 +571,7 @@ u8 X86API BE_inb(X86EMU_pioAddr port) { u8 val = 0; -#if defined(DEBUG) || !defined(__i386__) +#if !defined(CONFIG_X86EMU_RAW_IO) if (IS_VGA_PORT(port)){ /*seems reading port 0x3c3 return the high 16 bit of io port*/ if(port == 0x3c3) @@ -581,7 +592,12 @@ u8 X86API BE_inb(X86EMU_pioAddr port) val = LOG_inpb(port); } else #endif + { + debug_io("inb.%04X -> ", (u16) port); val = LOG_inpb(port); + debug_io("%02X\n", val); + } + return val; } @@ -601,7 +617,7 @@ u16 X86API BE_inw(X86EMU_pioAddr port) { u16 val = 0; -#if defined(DEBUG) || !defined(__i386__) +#if !defined(CONFIG_X86EMU_RAW_IO) if (IS_PCI_PORT(port)) val = PCI_inp(port, REG_READ_WORD); else if (port < 0x100) { @@ -609,7 +625,12 @@ u16 X86API BE_inw(X86EMU_pioAddr port) val = LOG_inpw(port); } else #endif + { + debug_io("inw.%04X -> ", (u16) port); val = LOG_inpw(port); + debug_io("%04X\n", val); + } + return val; } @@ -629,14 +650,19 @@ u32 X86API BE_inl(X86EMU_pioAddr port) { u32 val = 0; -#if defined(DEBUG) || !defined(__i386__) +#if !defined(CONFIG_X86EMU_RAW_IO) if (IS_PCI_PORT(port)) val = PCI_inp(port, REG_READ_DWORD); else if (port < 0x100) { val = LOG_inpd(port); } else #endif + { + debug_io("inl.%04X -> ", (u16) port); val = LOG_inpd(port); + debug_io("%08X\n", val); + } + return val; } @@ -652,7 +678,7 @@ through to the real hardware if we don't need to special case it. ****************************************************************************/ void X86API BE_outb(X86EMU_pioAddr port, u8 val) { -#if defined(DEBUG) || !defined(__i386__) +#if !defined(CONFIG_X86EMU_RAW_IO) if (IS_VGA_PORT(port)) VGA_outpb(port, val); else if (IS_TIMER_PORT(port)) @@ -668,7 +694,11 @@ void X86API BE_outb(X86EMU_pioAddr port, u8 val) LOG_outpb(port, val); } else #endif + { + debug_io("outb.%04X <- %02X", (u16) port, val); LOG_outpb(port, val); + debug_io("\n"); + } } /**************************************************************************** @@ -683,19 +713,23 @@ through to the real hardware if we don't need to special case it. ****************************************************************************/ void X86API BE_outw(X86EMU_pioAddr port, u16 val) { -#if defined(DEBUG) || !defined(__i386__) - if (IS_VGA_PORT(port)) { - VGA_outpb(port, val); - VGA_outpb(port + 1, val >> 8); - } else if (IS_PCI_PORT(port)) - PCI_outp(port, val, REG_WRITE_WORD); - else if (port < 0x100) { - DB(printf("WARN: MAybe INVALID outw.%04X <- %04X\n", (u16) port, - val);) - LOG_outpw(port, val); - } else +#if !defined(CONFIG_X86EMU_RAW_IO) + if (IS_VGA_PORT(port)) { + VGA_outpb(port, val); + VGA_outpb(port + 1, val >> 8); + } else if (IS_PCI_PORT(port)) { + PCI_outp(port, val, REG_WRITE_WORD); + } else if (port < 0x100) { + DB(printf("WARN: MAybe INVALID outw.%04X <- %04X\n", (u16)port, + val);) + LOG_outpw(port, val); + } else #endif - LOG_outpw(port, val); + { + debug_io("outw.%04X <- %04X", (u16) port, val); + LOG_outpw(port, val); + debug_io("\n"); + } } /**************************************************************************** @@ -710,13 +744,17 @@ through to the real hardware if we don't need to special case it. ****************************************************************************/ void X86API BE_outl(X86EMU_pioAddr port, u32 val) { -#if defined(DEBUG) || !defined(__i386__) - if (IS_PCI_PORT(port)) +#if !defined(CONFIG_X86EMU_RAW_IO) + if (IS_PCI_PORT(port)) { PCI_outp(port, val, REG_WRITE_DWORD); - else if (port < 0x100) { + } else if (port < 0x100) { DB(printf("WARN: INVALID outl.%04X <- %08X\n", (u16) port,val);) LOG_outpd(port, val); } else #endif + { + debug_io("outl.%04X <- %08X", (u16) port, val); LOG_outpd(port, val); + debug_io("\n"); + } } diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c index bcc192fb2e..152d70a778 100644 --- a/drivers/bios_emulator/bios.c +++ b/drivers/bios_emulator/bios.c @@ -84,14 +84,14 @@ static void X86API int42(int intno) PM_outpb(0x3c2, PM_inpb(0x3cc) & (u8) ~ 0x02); return; } -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG else { printf("int42: unknown function AH=0x12, BL=0x32, AL=%#02x\n", M.x86.R_AL); } #endif } -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG else { printf("int42: unknown function AH=%#02x, AL=%#02x, BL=%#02x\n", M.x86.R_AH, M.x86.R_AL, M.x86.R_BL); diff --git a/drivers/bios_emulator/biosemui.h b/drivers/bios_emulator/biosemui.h index 8c1f111fc8..7853015c1e 100644 --- a/drivers/bios_emulator/biosemui.h +++ b/drivers/bios_emulator/biosemui.h @@ -48,7 +48,7 @@ #include <asm/io.h> /*---------------------- Macros and type definitions ----------------------*/ -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG #define DB(x) x #else #define DB(x) do{}while(0); diff --git a/drivers/bios_emulator/include/biosemu.h b/drivers/bios_emulator/include/biosemu.h index e92e96e82b..124d79d80e 100644 --- a/drivers/bios_emulator/include/biosemu.h +++ b/drivers/bios_emulator/include/biosemu.h @@ -43,6 +43,8 @@ #ifndef __BIOSEMU_H #define __BIOSEMU_H +#include <bios_emul.h> + #ifdef __KERNEL__ #include "x86emu.h" #else @@ -55,57 +57,6 @@ #pragma pack(1) -#ifndef __KERNEL__ -/**************************************************************************** -REMARKS: -Data structure used to describe the details specific to a particular VGA -controller. This information is used to allow the VGA controller to be -swapped on the fly within the BIOS emulator. - -HEADER: -biosemu.h - -MEMBERS: -pciInfo - PCI device information block for the controller -BIOSImage - Pointer to a read/write copy of the BIOS image -BIOSImageLen - Length of the BIOS image -LowMem - Copy of key low memory areas -****************************************************************************/ -typedef struct { - PCIDeviceInfo *pciInfo; - void *BIOSImage; - ulong BIOSImageLen; - uchar LowMem[1536]; -} BE_VGAInfo; -#else -/**************************************************************************** -REMARKS: -Data structure used to describe the details for the BIOS emulator system -environment as used by the X86 emulator library. - -HEADER: -biosemu.h - -MEMBERS: -vgaInfo - VGA BIOS information structure -biosmem_base - Base of the BIOS image -biosmem_limit - Limit of the BIOS image -busmem_base - Base of the VGA bus memory -****************************************************************************/ -typedef struct { - int function; - int device; - int bus; - u32 VendorID; - u32 DeviceID; - pci_dev_t pcidev; - void *BIOSImage; - u32 BIOSImageLen; - u8 LowMem[1536]; -} BE_VGAInfo; - -#endif /* __KERNEL__ */ - #define CRT_C 24 /* 24 CRT Controller Registers */ #define ATT_C 21 /* 21 Attribute Controller Registers */ #define GRA_C 9 /* 9 Graphics Controller Registers */ diff --git a/drivers/bios_emulator/include/x86emu.h b/drivers/bios_emulator/include/x86emu.h index a70a76874b..b28cdc6b8c 100644 --- a/drivers/bios_emulator/include/x86emu.h +++ b/drivers/bios_emulator/include/x86emu.h @@ -53,9 +53,9 @@ typedef u16 X86EMU_pioAddr; /*---------------------- Macros and type definitions ----------------------*/ -#if defined (CONFIG_ARM) +#if defined(CONFIG_ARM) #define GAS_LINE_COMMENT "@" -#elif defined(CONFIG_MIPS) || defined(CONFIG_PPC) +#elif defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_X86) #define GAS_LINE_COMMENT "#" #elif defined (CONFIG_SH) #define GAS_LINE_COMMENT "!" @@ -153,6 +153,7 @@ extern "C" { /* Use "C" linkage when in C++ mode */ void X86EMU_setupMemFuncs(X86EMU_memFuncs * funcs); void X86EMU_setupPioFuncs(X86EMU_pioFuncs * funcs); void X86EMU_setupIntrFuncs(X86EMU_intrFuncs funcs[]); + void X86EMU_setupIntrFunc(int intnum, X86EMU_intrFuncs func); void X86EMU_prepareForInt(int num); /* decode.c */ @@ -160,7 +161,7 @@ extern "C" { /* Use "C" linkage when in C++ mode */ void X86EMU_exec(void); void X86EMU_halt_sys(void); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG #define HALT_SYS() \ printf("halt_sys: file %s, line %d\n", __FILE__, __LINE__), \ X86EMU_halt_sys() diff --git a/drivers/bios_emulator/include/x86emu/debug.h b/drivers/bios_emulator/include/x86emu/debug.h index 268c9d391e..304b2bf007 100644 --- a/drivers/bios_emulator/include/x86emu/debug.h +++ b/drivers/bios_emulator/include/x86emu/debug.h @@ -48,7 +48,7 @@ #define CHECK_MEM_ACCESS_F 0x4 /*using regular linear pointer */ #define CHECK_DATA_ACCESS_F 0x8 /*using segment:offset */ -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG # define CHECK_IP_FETCH() (M.x86.check & CHECK_IP_FETCH_F) # define CHECK_SP_ACCESS() (M.x86.check & CHECK_SP_ACCESS_F) # define CHECK_MEM_ACCESS() (M.x86.check & CHECK_MEM_ACCESS_F) @@ -60,7 +60,7 @@ # define CHECK_DATA_ACCESS() #endif -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG # define DEBUG_INSTRUMENT() (M.x86.debug & DEBUG_INSTRUMENT_F) # define DEBUG_DECODE() (M.x86.debug & DEBUG_DECODE_F) # define DEBUG_TRACE() (M.x86.debug & DEBUG_TRACE_F) @@ -99,7 +99,11 @@ # define DEBUG_DECODE_NOPRINT() 0 #endif -#ifdef DEBUG +# define ERR_PRINTF(x) printf(x) +# define ERR_PRINTF2(x, y) printf(x, y) + +#ifdef CONFIG_X86EMU_DEBUG103 + # define DECODE_PRINTF(x) if (DEBUG_DECODE()) \ x86emu_decode_printf(x) @@ -129,7 +133,7 @@ # define SAVE_IP_CS(x,y) #endif -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG #define TRACE_REGS() \ if (DEBUG_DISASSEMBLE()) { \ x86emu_just_disassemble(); \ @@ -140,7 +144,7 @@ # define TRACE_REGS() #endif -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG # define SINGLE_STEP() if (DEBUG_STEP()) x86emu_single_step() #else # define SINGLE_STEP() @@ -150,7 +154,7 @@ TRACE_REGS(); \ SINGLE_STEP() -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG # define START_OF_INSTR() # define END_OF_INSTR() EndOfTheInstructionProcedure: x86emu_end_instr(); # define END_OF_INSTR_NO_TRACE() x86emu_end_instr(); @@ -160,7 +164,7 @@ # define END_OF_INSTR_NO_TRACE() #endif -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG # define CALL_TRACE(u,v,w,x,s) \ if (DEBUG_TRACECALLREGS()) \ x86emu_dump_regs(); \ @@ -176,7 +180,7 @@ # define RETURN_TRACE(n,u,v) #endif -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG #define DB(x) x #else #define DB(x) diff --git a/drivers/bios_emulator/include/x86emu/regs.h b/drivers/bios_emulator/include/x86emu/regs.h index a7fedd2f6c..29341297d9 100644 --- a/drivers/bios_emulator/include/x86emu/regs.h +++ b/drivers/bios_emulator/include/x86emu/regs.h @@ -282,7 +282,7 @@ typedef struct { u8 intno; volatile int intr; /* mask of pending interrupts */ int debug; -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG int check; u16 saved_ip; u16 saved_cs; diff --git a/drivers/bios_emulator/x86emu/debug.c b/drivers/bios_emulator/x86emu/debug.c index 2fa8050f6a..27e90e441a 100644 --- a/drivers/bios_emulator/x86emu/debug.c +++ b/drivers/bios_emulator/x86emu/debug.c @@ -44,7 +44,7 @@ /*----------------------------- Implementation ----------------------------*/ -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG static void print_encoded_bytes(u16 s, u16 o); static void print_decoded_instruction(void); @@ -211,9 +211,7 @@ void X86EMU_dump_memory(u16 seg, u16 off, u32 amt) u32 start = off & 0xfffffff0; u32 end = (off + 16) & 0xfffffff0; u32 i; - u32 current; - current = start; while (end <= off + amt) { printk("%04x:%04x ", seg, start); for (i = start; i < off; i++) @@ -229,7 +227,7 @@ void X86EMU_dump_memory(u16 seg, u16 off, u32 amt) void x86emu_single_step(void) { char s[1024]; - int ps[10]; + int ps[10]; int ntok; int cmd; int done; @@ -238,8 +236,6 @@ void x86emu_single_step(void) static int breakpoint; static int noDecode = 1; - char *p; - if (DEBUG_BREAK()) { if (M.x86.saved_ip != breakpoint) { return; @@ -255,6 +251,8 @@ void x86emu_single_step(void) offset = M.x86.saved_ip; while (!done) { printk("-"); + ps[1] = 0; /* Avoid dodgy compiler warnings */ + ps[2] = 0; cmd = x86emu_parse_line(s, ps, &ntok); switch (cmd) { case 'u': diff --git a/drivers/bios_emulator/x86emu/decode.c b/drivers/bios_emulator/x86emu/decode.c index a782b817b7..da44c3d8d9 100644 --- a/drivers/bios_emulator/x86emu/decode.c +++ b/drivers/bios_emulator/x86emu/decode.c @@ -303,7 +303,7 @@ NOTE: Do not inline this function as (*sys_rdX) is already inline! u8 fetch_data_byte( uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -322,7 +322,7 @@ NOTE: Do not inline this function as (*sys_rdX) is already inline! u16 fetch_data_word( uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -341,7 +341,7 @@ NOTE: Do not inline this function as (*sys_rdX) is already inline! u32 fetch_data_long( uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -362,7 +362,7 @@ u8 fetch_data_byte_abs( uint segment, uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif @@ -383,7 +383,7 @@ u16 fetch_data_word_abs( uint segment, uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif @@ -404,7 +404,7 @@ u32 fetch_data_long_abs( uint segment, uint offset) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif @@ -426,7 +426,7 @@ void store_data_byte( uint offset, u8 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -448,7 +448,7 @@ void store_data_word( uint offset, u16 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -470,7 +470,7 @@ void store_data_long( uint offset, u32 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access((u16)get_data_segment(), offset); #endif @@ -493,7 +493,7 @@ void store_data_byte_abs( uint offset, u8 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif @@ -516,7 +516,7 @@ void store_data_word_abs( uint offset, u16 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif @@ -539,7 +539,7 @@ void store_data_long_abs( uint offset, u32 val) { -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (CHECK_DATA_ACCESS()) x86emu_check_data_access(segment, offset); #endif diff --git a/drivers/bios_emulator/x86emu/ops.c b/drivers/bios_emulator/x86emu/ops.c index f8e093d751..2bb5e2d9d5 100644 --- a/drivers/bios_emulator/x86emu/ops.c +++ b/drivers/bios_emulator/x86emu/ops.c @@ -79,7 +79,7 @@ /* constant arrays to do several instructions in just one function */ -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG static char *x86emu_GenOpName[8] = { "ADD", "OR", "ADC", "SBB", "AND", "SUB", "XOR", "CMP"}; #endif @@ -160,7 +160,7 @@ static u32 (*opcD1_long_operation[])(u32 s, u8 d) = sar_long, }; -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG static char *opF6_names[8] = { "TEST\t", "", "NOT\t", "NEG\t", "MUL\t", "IMUL\t", "DIV\t", "IDIV\t" }; @@ -179,7 +179,7 @@ void x86emuOp_illegal_op( { START_OF_INSTR(); if (M.x86.R_SP != 0) { - DECODE_PRINTF("ILLEGAL X86 OPCODE\n"); + ERR_PRINTF("ILLEGAL X86 OPCODE\n"); TRACE_REGS(); DB( printk("%04x:%04x: %02X ILLEGAL X86 OPCODE!\n", M.x86.R_CS, M.x86.R_IP-1,op1)); @@ -1281,7 +1281,7 @@ void x86emuOp_opc80_byte_RM_IMM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -1359,7 +1359,7 @@ void x86emuOp_opc81_word_RM_IMM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -1475,7 +1475,7 @@ void x86emuOp_opc82_byte_RM_IMM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -1551,7 +1551,7 @@ void x86emuOp_opc83_word_RM_IMM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -2148,7 +2148,7 @@ void x86emuOp_pop_RM(u8 X86EMU_UNUSED(op1)) DECODE_PRINTF("POP\t"); FETCH_DECODE_MODRM(mod, rh, rl); if (rh != 0) { - DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n"); + ERR_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n"); HALT_SYS(); } if (mod < 3) { @@ -3083,7 +3083,7 @@ void x86emuOp_opcC0_byte_RM_MEM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3158,7 +3158,7 @@ void x86emuOp_opcC1_word_RM_MEM(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3347,7 +3347,7 @@ void x86emuOp_mov_byte_RM_IMM(u8 X86EMU_UNUSED(op1)) DECODE_PRINTF("MOV\t"); FETCH_DECODE_MODRM(mod, rh, rl); if (rh != 0) { - DECODE_PRINTF("ILLEGAL DECODE OF OPCODE c6\n"); + ERR_PRINTF("ILLEGAL DECODE OF OPCODE c6\n"); HALT_SYS(); } if (mod < 3) { @@ -3381,7 +3381,7 @@ void x86emuOp_mov_word_RM_IMM(u8 X86EMU_UNUSED(op1)) DECODE_PRINTF("MOV\t"); FETCH_DECODE_MODRM(mod, rh, rl); if (rh != 0) { - DECODE_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n"); + ERR_PRINTF("ILLEGAL DECODE OF OPCODE 8F\n"); HALT_SYS(); } if (mod < 3) { @@ -3630,7 +3630,7 @@ void x86emuOp_opcD0_byte_RM_1(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3701,7 +3701,7 @@ void x86emuOp_opcD1_word_RM_1(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3803,7 +3803,7 @@ void x86emuOp_opcD2_byte_RM_CL(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3876,7 +3876,7 @@ void x86emuOp_opcD3_word_RM_CL(u8 X86EMU_UNUSED(op1)) */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -3968,7 +3968,7 @@ void x86emuOp_aam(u8 X86EMU_UNUSED(op1)) DECODE_PRINTF("AAM\n"); a = fetch_byte_imm(); /* this is a stupid encoding. */ if (a != 10) { - DECODE_PRINTF("ERROR DECODING AAM\n"); + ERR_PRINTF("ERROR DECODING AAM\n"); TRACE_REGS(); HALT_SYS(); } @@ -4443,7 +4443,7 @@ void x86emuOp_opcF6_byte_RM(u8 X86EMU_UNUSED(op1)) test_byte(destval, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); HALT_SYS(); break; case 2: @@ -4490,7 +4490,7 @@ void x86emuOp_opcF6_byte_RM(u8 X86EMU_UNUSED(op1)) test_byte(*destreg, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); HALT_SYS(); break; case 2: @@ -4559,7 +4559,7 @@ void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1)) test_long(destval, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n"); HALT_SYS(); break; case 2: @@ -4611,7 +4611,7 @@ void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1)) test_word(destval, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F7\n"); HALT_SYS(); break; case 2: @@ -4666,7 +4666,7 @@ void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1)) test_long(*destreg, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); HALT_SYS(); break; case 2: @@ -4715,7 +4715,7 @@ void x86emuOp_opcF7_word_RM(u8 X86EMU_UNUSED(op1)) test_word(*destreg, srcval); break; case 1: - DECODE_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); + ERR_PRINTF("ILLEGAL OP MOD=00 RH=01 OP=F6\n"); HALT_SYS(); break; case 2: @@ -4859,7 +4859,7 @@ void x86emuOp_opcFE_byte_RM(u8 X86EMU_UNUSED(op1)) /* Yet another special case instruction. */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -4879,7 +4879,7 @@ void x86emuOp_opcFE_byte_RM(u8 X86EMU_UNUSED(op1)) case 5: case 6: case 7: - DECODE_PRINTF2("ILLEGAL OP MAJOR OP 0xFE MINOR OP %x \n", mod); + ERR_PRINTF2("ILLEGAL OP MAJOR OP 0xFE MINOR OP %x\n", mod); HALT_SYS(); break; } @@ -4923,7 +4923,7 @@ void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1)) /* Yet another special case instruction. */ START_OF_INSTR(); FETCH_DECODE_MODRM(mod, rh, rl); -#ifdef DEBUG +#ifdef CONFIG_X86EMU_DEBUG if (DEBUG_DECODE()) { /* XXX DECODE_PRINTF may be changed to something more general, so that it is important to leave the strings @@ -4961,7 +4961,7 @@ void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1)) DECODE_PRINTF("PUSH\t"); break; case 7: - DECODE_PRINTF("ILLEGAL DECODING OF OPCODE FF\t"); + ERR_PRINTF("ILLEGAL DECODING OF OPCODE FF\t"); HALT_SYS(); break; } @@ -5092,7 +5092,7 @@ void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1)) M.x86.R_IP = *destreg; break; case 3: /* jmp far ptr ... */ - DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n"); + ERR_PRINTF("OPERATION UNDEFINED 0XFF\n"); TRACE_AND_STEP(); HALT_SYS(); break; @@ -5104,7 +5104,7 @@ void x86emuOp_opcFF_word_RM(u8 X86EMU_UNUSED(op1)) M.x86.R_IP = (u16) (*destreg); break; case 5: /* jmp far ptr ... */ - DECODE_PRINTF("OPERATION UNDEFINED 0XFF \n"); + ERR_PRINTF("OPERATION UNDEFINED 0XFF\n"); TRACE_AND_STEP(); HALT_SYS(); break; diff --git a/drivers/bios_emulator/x86emu/ops2.c b/drivers/bios_emulator/x86emu/ops2.c index 59dbb422dd..be4ef36443 100644 --- a/drivers/bios_emulator/x86emu/ops2.c +++ b/drivers/bios_emulator/x86emu/ops2.c @@ -58,7 +58,7 @@ void x86emuOp2_illegal_op( u8 op2) { START_OF_INSTR(); - DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n"); + ERR_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n"); TRACE_REGS(); printk("%04x:%04x: %02X ILLEGAL EXTENDED X86 OPCODE!\n", M.x86.R_CS, M.x86.R_IP-2,op2); @@ -1089,7 +1089,7 @@ void x86emuOp2_btX_I(u8 X86EMU_UNUSED(op2)) DECODE_PRINTF("BTC\t"); break; default: - DECODE_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n"); + ERR_PRINTF("ILLEGAL EXTENDED X86 OPCODE\n"); TRACE_REGS(); printk("%04x:%04x: %02X%02X ILLEGAL EXTENDED X86 OPCODE EXTENSION!\n", M.x86.R_CS, M.x86.R_IP-3,op2, (mod<<6)|(rh<<3)|rl); diff --git a/drivers/bios_emulator/x86emu/sys.c b/drivers/bios_emulator/x86emu/sys.c index 21f9730bec..0ba9c0c105 100644 --- a/drivers/bios_emulator/x86emu/sys.c +++ b/drivers/bios_emulator/x86emu/sys.c @@ -273,6 +273,11 @@ void X86EMU_setupPioFuncs(X86EMU_pioFuncs * funcs) sys_outl = funcs->outl; } +void X86EMU_setupIntrFunc(int intnum, X86EMU_intrFuncs func) +{ + _X86EMU_intrTab[intnum] = func; +} + /**************************************************************************** PARAMETERS: funcs - New interrupt vector table to make active diff --git a/drivers/block/pata_bfin.h b/drivers/block/pata_bfin.h index 2093cf06b4..b678f60b2d 100644 --- a/drivers/block/pata_bfin.h +++ b/drivers/block/pata_bfin.h @@ -43,7 +43,6 @@ struct ata_port { #define DRV_NAME "pata-bfin" #define DRV_VERSION "0.9" -#define __iomem #define ATA_REG_CTRL 0x0E #define ATA_REG_ALTSTATUS ATA_REG_CTRL diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c index d34b749a56..41cc3b8fa4 100644 --- a/drivers/i2c/i2c_core.c +++ b/drivers/i2c/i2c_core.c @@ -174,11 +174,11 @@ static int i2c_mux_set_all(void) return 0; } -static int i2c_mux_disconnet_all(void) +static int i2c_mux_disconnect_all(void) { struct i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS]; int i; - uint8_t buf; + uint8_t buf = 0; if (I2C_ADAP->init_done == 0) return 0; @@ -197,7 +197,7 @@ static int i2c_mux_disconnet_all(void) ret = I2C_ADAP->write(I2C_ADAP, chip, 0, 0, &buf, 1); if (ret != 0) { - printf("i2c: mux diconnect error\n"); + printf("i2c: mux disconnect error\n"); return ret; } } while (i > 0); @@ -293,7 +293,7 @@ int i2c_set_bus_num(unsigned int bus) } #ifndef CONFIG_SYS_I2C_DIRECT_BUS - i2c_mux_disconnet_all(); + i2c_mux_disconnect_all(); #endif gd->cur_i2c_bus = bus; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 44a4feb96e..8436bc7f5d 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1277,6 +1277,11 @@ block_dev_desc_t *mmc_get_dev(int dev) } #endif +/* board-specific MMC power initializations. */ +__weak void board_mmc_power_init(void) +{ +} + int mmc_start_init(struct mmc *mmc) { int err; @@ -1293,6 +1298,8 @@ int mmc_start_init(struct mmc *mmc) if (mmc->has_init) return 0; + board_mmc_power_init(); + /* made sure it's not NULL earlier */ err = mmc->cfg->ops->init(mmc); diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index ffb5284a00..c880cedb0a 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -135,12 +135,7 @@ static unsigned char mmc_board_init(struct mmc *mmc) pbias_lite = readl(&t2_base->pbias_lite); pbias_lite &= ~(PBIASLITEPWRDNZ1 | PBIASLITEPWRDNZ0); writel(pbias_lite, &t2_base->pbias_lite); -#endif -#if defined(CONFIG_TWL4030_POWER) - twl4030_power_mmc_init(); - mdelay(100); /* ramp-up delay from Linux code */ -#endif -#if defined(CONFIG_OMAP34XX) + writel(pbias_lite | PBIASLITEPWRDNZ1 | PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0, &t2_base->pbias_lite); @@ -663,7 +658,8 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, case 1: priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE; #if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \ - defined(CONFIG_DRA7XX)) && defined(CONFIG_HSMMC2_8BIT) + defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)) && \ + defined(CONFIG_HSMMC2_8BIT) /* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */ host_caps_val |= MMC_MODE_8BIT; #endif @@ -672,7 +668,7 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, #ifdef OMAP_HSMMC3_BASE case 2: priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE; -#if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT) +#if (defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)) && defined(CONFIG_HSMMC3_8BIT) /* Enable 8-bit interface for eMMC on DRA7XX */ host_caps_val |= MMC_MODE_8BIT; #endif diff --git a/drivers/mmc/sh_mmcif.c b/drivers/mmc/sh_mmcif.c index ed83a14c2d..76ba93b81d 100644 --- a/drivers/mmc/sh_mmcif.c +++ b/drivers/mmc/sh_mmcif.c @@ -103,20 +103,18 @@ static int mmcif_wait_interrupt_flag(struct sh_mmcif_host *host) static void sh_mmcif_clock_control(struct sh_mmcif_host *host, unsigned int clk) { - int i; - sh_mmcif_bitclr(CLK_ENABLE, &host->regs->ce_clk_ctrl); sh_mmcif_bitclr(CLK_CLEAR, &host->regs->ce_clk_ctrl); if (!clk) return; - if (clk == CLKDEV_EMMC_DATA) { + + if (clk == CLKDEV_EMMC_DATA) sh_mmcif_bitset(CLK_PCLK, &host->regs->ce_clk_ctrl); - } else { - for (i = 1; (unsigned int)host->clk / (1 << i) >= clk; i++) - ; - sh_mmcif_bitset((i - 1) << 16, &host->regs->ce_clk_ctrl); - } + else + sh_mmcif_bitset((fls(DIV_ROUND_UP(host->clk, + clk) - 1) - 1) << 16, + &host->regs->ce_clk_ctrl); sh_mmcif_bitset(CLK_ENABLE, &host->regs->ce_clk_ctrl); } @@ -581,8 +579,6 @@ static struct mmc_config sh_mmcif_cfg = { .host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC, .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .f_min = CLKDEV_MMC_INIT, - .f_max = CLKDEV_EMMC_DATA, .b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, }; @@ -599,6 +595,9 @@ int mmcif_mmc_init(void) host->regs = (struct sh_mmcif_regs *)CONFIG_SH_MMCIF_ADDR; host->clk = CONFIG_SH_MMCIF_CLK; + sh_mmcif_cfg.f_min = MMC_CLK_DIV_MIN(host->clk); + sh_mmcif_cfg.f_max = MMC_CLK_DIV_MAX(host->clk); + mmc = mmc_create(&sh_mmcif_cfg, host); if (mmc == NULL) { free(host); diff --git a/drivers/mmc/sh_mmcif.h b/drivers/mmc/sh_mmcif.h index bd6fbf7c62..4b6752f7f9 100644 --- a/drivers/mmc/sh_mmcif.h +++ b/drivers/mmc/sh_mmcif.h @@ -199,7 +199,13 @@ struct sh_mmcif_regs { #define SOFT_RST_OFF (0 << 31) #define CLKDEV_EMMC_DATA 52000000 /* 52MHz */ -#define CLKDEV_MMC_INIT 400000 /* 100 - 400 KHz */ +#ifdef CONFIG_RMOBILE +#define MMC_CLK_DIV_MIN(clk) (clk / (1 << 9)) +#define MMC_CLK_DIV_MAX(clk) (clk / (1 << 1)) +#else +#define MMC_CLK_DIV_MIN(clk) (clk / (1 << 8)) +#define MMC_CLK_DIV_MAX(clk) CLKDEV_EMMC_DATA +#endif #define MMC_BUS_WIDTH_1 0 #define MMC_BUS_WIDTH_4 2 diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 40d670563c..93829a40b6 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -73,14 +73,11 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd, writeb(cmd, this->IO_ADDR_W); } -#ifdef CONFIG_SPL_BUILD /* Check wait pin as dev ready indicator */ -static int omap_spl_dev_ready(struct mtd_info *mtd) +static int omap_dev_ready(struct mtd_info *mtd) { return gpmc_cfg->status & (1 << 8); } -#endif - /* * gen_true_ecc - This function will generate true ECC value, which @@ -887,7 +884,9 @@ int board_nand_init(struct nand_chip *nand) nand->read_buf = nand_read_buf16; else nand->read_buf = nand_read_buf; - nand->dev_ready = omap_spl_dev_ready; #endif + + nand->dev_ready = omap_dev_ready; + return 0; } diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index e73a498619..55d6a9b322 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -6,7 +6,7 @@ # obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o -obj-$(CONFIG_PCI) += pci.o pci_auto.o +obj-$(CONFIG_PCI) += pci.o pci_auto.o pci_rom.o obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o obj-$(CONFIG_PCI_MSC01) += pci_msc01.o diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 7ee21d1c1d..3daf73c30a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -366,9 +366,27 @@ phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose, return phys_addr; } -/* - * - */ +void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum, + u32 addr_and_ctrl) +{ + int bar; + + bar = PCI_BASE_ADDRESS_0 + barnum * 4; + pci_hose_write_config_dword(hose, dev, bar, addr_and_ctrl); +} + +u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum) +{ + u32 addr; + int bar; + + bar = PCI_BASE_ADDRESS_0 + barnum * 4; + pci_hose_read_config_dword(hose, dev, bar, &addr); + if (addr & PCI_BASE_ADDRESS_SPACE_IO) + return addr & PCI_BASE_ADDRESS_IO_MASK; + else + return addr & PCI_BASE_ADDRESS_MEM_MASK; +} int pci_hose_config_device(struct pci_controller *hose, pci_dev_t dev, diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c new file mode 100644 index 0000000000..af6a3ae00c --- /dev/null +++ b/drivers/pci/pci_rom.c @@ -0,0 +1,278 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * From coreboot, originally based on the Linux kernel (drivers/pci/pci.c). + * + * Modifications are: + * Copyright (C) 2003-2004 Linux Networx + * (Written by Eric Biederman <ebiederman@lnxi.com> for Linux Networx) + * Copyright (C) 2003-2006 Ronald G. Minnich <rminnich@gmail.com> + * Copyright (C) 2004-2005 Li-Ta Lo <ollie@lanl.gov> + * Copyright (C) 2005-2006 Tyan + * (Written by Yinghai Lu <yhlu@tyan.com> for Tyan) + * Copyright (C) 2005-2009 coresystems GmbH + * (Written by Stefan Reinauer <stepan@coresystems.de> for coresystems GmbH) + * + * PCI Bus Services, see include/linux/pci.h for further explanation. + * + * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter, + * David Mosberger-Tang + * + * Copyright 1997 -- 1999 Martin Mares <mj@atrey.karlin.mff.cuni.cz> + + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <bios_emul.h> +#include <errno.h> +#include <malloc.h> +#include <pci.h> +#include <pci_rom.h> +#include <vbe.h> +#include <video_fb.h> + +#ifdef CONFIG_HAVE_ACPI_RESUME +#include <asm/acpi.h> +#endif + +__weak bool board_should_run_oprom(pci_dev_t dev) +{ + return true; +} + +static bool should_load_oprom(pci_dev_t dev) +{ +#ifdef CONFIG_HAVE_ACPI_RESUME + if (acpi_get_slp_type() == 3) + return false; +#endif + if (IS_ENABLED(CONFIG_ALWAYS_LOAD_OPROM)) + return 1; + if (board_should_run_oprom(dev)) + return 1; + + return 0; +} + +__weak uint32_t board_map_oprom_vendev(uint32_t vendev) +{ + return vendev; +} + +static int pci_rom_probe(pci_dev_t dev, uint class, + struct pci_rom_header **hdrp) +{ + struct pci_rom_header *rom_header; + struct pci_rom_data *rom_data; + u16 vendor, device; + u32 vendev; + u32 mapped_vendev; + u32 rom_address; + + pci_read_config_word(dev, PCI_VENDOR_ID, &vendor); + pci_read_config_word(dev, PCI_DEVICE_ID, &device); + vendev = vendor << 16 | device; + mapped_vendev = board_map_oprom_vendev(vendev); + if (vendev != mapped_vendev) + debug("Device ID mapped to %#08x\n", mapped_vendev); + +#ifdef CONFIG_X86_OPTION_ROM_ADDR + rom_address = CONFIG_X86_OPTION_ROM_ADDR; +#else + pci_write_config_dword(dev, PCI_ROM_ADDRESS, (u32)PCI_ROM_ADDRESS_MASK); + pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_address); + if (rom_address == 0x00000000 || rom_address == 0xffffffff) { + debug("%s: rom_address=%x\n", __func__, rom_address); + return -ENOENT; + } + + /* Enable expansion ROM address decoding. */ + pci_write_config_dword(dev, PCI_ROM_ADDRESS, + rom_address | PCI_ROM_ADDRESS_ENABLE); +#endif + debug("Option ROM address %x\n", rom_address); + rom_header = (struct pci_rom_header *)rom_address; + + debug("PCI expansion ROM, signature %#04x, INIT size %#04x, data ptr %#04x\n", + le32_to_cpu(rom_header->signature), + rom_header->size * 512, le32_to_cpu(rom_header->data)); + + if (le32_to_cpu(rom_header->signature) != PCI_ROM_HDR) { + printf("Incorrect expansion ROM header signature %04x\n", + le32_to_cpu(rom_header->signature)); + return -EINVAL; + } + + rom_data = (((void *)rom_header) + le32_to_cpu(rom_header->data)); + + debug("PCI ROM image, vendor ID %04x, device ID %04x,\n", + rom_data->vendor, rom_data->device); + + /* If the device id is mapped, a mismatch is expected */ + if ((vendor != rom_data->vendor || device != rom_data->device) && + (vendev == mapped_vendev)) { + printf("ID mismatch: vendor ID %04x, device ID %04x\n", + rom_data->vendor, rom_data->device); + return -EPERM; + } + + debug("PCI ROM image, Class Code %04x%02x, Code Type %02x\n", + rom_data->class_hi, rom_data->class_lo, rom_data->type); + + if (class != ((rom_data->class_hi << 8) | rom_data->class_lo)) { + debug("Class Code mismatch ROM %08x, dev %08x\n", + (rom_data->class_hi << 8) | rom_data->class_lo, + class); + } + *hdrp = rom_header; + + return 0; +} + +int pci_rom_load(uint16_t class, struct pci_rom_header *rom_header, + struct pci_rom_header **ram_headerp) +{ + struct pci_rom_data *rom_data; + unsigned int rom_size; + unsigned int image_size = 0; + void *target; + + do { + /* Get next image, until we see an x86 version */ + rom_header = (struct pci_rom_header *)((void *)rom_header + + image_size); + + rom_data = (struct pci_rom_data *)((void *)rom_header + + le32_to_cpu(rom_header->data)); + + image_size = le32_to_cpu(rom_data->ilen) * 512; + } while ((rom_data->type != 0) && (rom_data->indicator != 0)); + + if (rom_data->type != 0) + return -EACCES; + + rom_size = rom_header->size * 512; + + target = (void *)PCI_VGA_RAM_IMAGE_START; + if (target != rom_header) { + debug("Copying VGA ROM Image from %p to %p, 0x%x bytes\n", + rom_header, target, rom_size); + memcpy(target, rom_header, rom_size); + if (memcmp(target, rom_header, rom_size)) { + printf("VGA ROM copy failed\n"); + return -EFAULT; + } + } + *ram_headerp = target; + + return 0; +} + +static struct vbe_mode_info mode_info; + +int vbe_get_video_info(struct graphic_device *gdev) +{ +#ifdef CONFIG_FRAMEBUFFER_SET_VESA_MODE + struct vesa_mode_info *vesa = &mode_info.vesa; + + gdev->winSizeX = vesa->x_resolution; + gdev->winSizeY = vesa->y_resolution; + + gdev->plnSizeX = vesa->x_resolution; + gdev->plnSizeY = vesa->y_resolution; + + gdev->gdfBytesPP = vesa->bits_per_pixel / 8; + + switch (vesa->bits_per_pixel) { + case 24: + gdev->gdfIndex = GDF_32BIT_X888RGB; + break; + case 16: + gdev->gdfIndex = GDF_16BIT_565RGB; + break; + default: + gdev->gdfIndex = GDF__8BIT_INDEX; + break; + } + + gdev->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS; + gdev->pciBase = vesa->phys_base_ptr; + + gdev->frameAdrs = vesa->phys_base_ptr; + gdev->memSize = vesa->bytes_per_scanline * vesa->y_resolution; + + gdev->vprBase = vesa->phys_base_ptr; + gdev->cprBase = vesa->phys_base_ptr; + + return 0; +#else + return -ENOSYS; +#endif +} + +int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), bool emulate) +{ + struct pci_rom_header *rom, *ram; + int vesa_mode = -1; + uint16_t class; + int ret; + + /* Only execute VGA ROMs */ + pci_read_config_word(dev, PCI_CLASS_DEVICE, &class); + if ((class ^ PCI_CLASS_DISPLAY_VGA) & 0xff00) { + debug("%s: Class %#x, should be %#x\n", __func__, class, + PCI_CLASS_DISPLAY_VGA); + return -ENODEV; + } + + if (!should_load_oprom(dev)) + return -ENXIO; + + ret = pci_rom_probe(dev, class, &rom); + if (ret) + return ret; + + ret = pci_rom_load(class, rom, &ram); + if (ret) + return ret; + + if (!board_should_run_oprom(dev)) + return -ENXIO; + +#if defined(CONFIG_FRAMEBUFFER_SET_VESA_MODE) && \ + defined(CONFIG_FRAMEBUFFER_VESA_MODE) + vesa_mode = CONFIG_FRAMEBUFFER_VESA_MODE; +#endif + debug("Selected vesa mode %d\b", vesa_mode); + if (emulate) { +#ifdef CONFIG_BIOSEMU + BE_VGAInfo *info; + + ret = biosemu_setup(dev, &info); + if (ret) + return ret; + biosemu_set_interrupt_handler(0x15, int15_handler); + ret = biosemu_run(dev, (uchar *)ram, 1 << 16, info, true, + vesa_mode, &mode_info); + if (ret) + return ret; +#else + printf("BIOS emulation not available - see CONFIG_BIOSEMU\n"); + return -ENOSYS; +#endif + } else { +#ifdef CONFIG_X86 + bios_set_interrupt_handler(0x15, int15_handler); + + bios_run_on_x86(dev, (unsigned long)ram, vesa_mode, + &mode_info); +#else + printf("BIOS native execution is only available on x86\n"); + return -ENOSYS; +#endif + } + debug("Final vesa mode %d\n", mode_info.video_mode); + + return 0; +} diff --git a/drivers/power/palmas.c b/drivers/power/palmas.c index cfbc9dc522..6430fe004d 100644 --- a/drivers/power/palmas.c +++ b/drivers/power/palmas.c @@ -27,7 +27,7 @@ int palmas_mmc1_poweron_ldo(void) { u8 val = 0; -#if defined(CONFIG_DRA7XX) +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) /* * Currently valid for the dra7xx_evm board: * Set TPS659038 LDO1 to 3.0 V diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c index 594cd11725..0dcf9fe918 100644 --- a/drivers/power/power_i2c.c +++ b/drivers/power/power_i2c.c @@ -14,7 +14,7 @@ #include <linux/types.h> #include <power/pmic.h> #include <i2c.h> -#include <compiler.h> +#include <linux/compiler.h> int pmic_reg_write(struct pmic *p, u32 reg, u32 val) { diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index e578ae6342..7f1fdd1534 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -91,17 +91,23 @@ void twl4030_power_init(void) TWL4030_PM_RECEIVER_DEV_GRP_P1); } -void twl4030_power_mmc_init(void) +void twl4030_power_mmc_init(int dev_index) { - /* Set VMMC1 to 3.15 Volts */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED, - TWL4030_PM_RECEIVER_VMMC1_VSEL_32, - TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); + if (dev_index == 0) { + /* Set VMMC1 to 3.15 Volts */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED, + TWL4030_PM_RECEIVER_VMMC1_VSEL_32, + TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); - /* Set VMMC2 to 3.15 Volts */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, - TWL4030_PM_RECEIVER_VMMC2_VSEL_32, - TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); + mdelay(100); /* ramp-up delay from Linux code */ + } else if (dev_index == 1) { + /* Set VMMC2 to 3.15 Volts */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, + TWL4030_PM_RECEIVER_VMMC2_VSEL_32, + TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + + mdelay(100); /* ramp-up delay from Linux code */ + } } diff --git a/drivers/rtc/bfin_rtc.c b/drivers/rtc/bfin_rtc.c index 21a2189e27..4cf2d834b2 100644 --- a/drivers/rtc/bfin_rtc.c +++ b/drivers/rtc/bfin_rtc.c @@ -27,7 +27,7 @@ #define NUM_SECS_IN_DAY DAYS_TO_SECS(1) /* Enable the RTC prescaler enable register */ -static void rtc_init(void) +void rtc_init(void) { if (!(bfin_read_RTC_PREN() & 0x1)) bfin_write_RTC_PREN(0x1); diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c index f7cf1064f9..39e6041be3 100644 --- a/drivers/rtc/mc146818.c +++ b/drivers/rtc/mc146818.c @@ -14,6 +14,7 @@ #include <common.h> #include <command.h> #include <rtc.h> +#include <version.h> #if defined(__I386__) || defined(CONFIG_MALTA) #include <asm/io.h> @@ -23,6 +24,9 @@ #if defined(CONFIG_CMD_DATE) +/* Set this to 1 to clear the CMOS RAM */ +#define CLEAR_CMOS 0 + static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val); @@ -41,7 +45,14 @@ static void rtc_write (uchar reg, uchar val); #define RTC_CONFIG_B 0x0B #define RTC_CONFIG_C 0x0C #define RTC_CONFIG_D 0x0D +#define RTC_REG_SIZE 0x80 + +#define RTC_CONFIG_A_REF_CLCK_32KHZ (1 << 5) +#define RTC_CONFIG_A_RATE_1024HZ 6 +#define RTC_CONFIG_B_24H (1 << 1) + +#define RTC_CONFIG_D_VALID_RAM_AND_TIME 0x80 /* ------------------------------------------------------------------------- */ @@ -128,25 +139,49 @@ void rtc_reset (void) */ static uchar rtc_read (uchar reg) { - return(in8(CONFIG_SYS_RTC_REG_BASE_ADDR+reg)); + return in8(CONFIG_SYS_RTC_REG_BASE_ADDR + reg); } static void rtc_write (uchar reg, uchar val) { - out8(CONFIG_SYS_RTC_REG_BASE_ADDR+reg, val); + out8(CONFIG_SYS_RTC_REG_BASE_ADDR + reg, val); } #else static uchar rtc_read (uchar reg) { out8(RTC_PORT_MC146818,reg); - return(in8(RTC_PORT_MC146818+1)); + return in8(RTC_PORT_MC146818 + 1); } static void rtc_write (uchar reg, uchar val) { out8(RTC_PORT_MC146818,reg); - out8(RTC_PORT_MC146818+1,val); + out8(RTC_PORT_MC146818+1, val); } #endif +void rtc_init(void) +{ +#if CLEAR_CMOS + int i; + + rtc_write(RTC_SECONDS_ALARM, 0); + rtc_write(RTC_MINUTES_ALARM, 0); + rtc_write(RTC_HOURS_ALARM, 0); + for (i = RTC_CONFIG_A; i < RTC_REG_SIZE; i++) + rtc_write(i, 0); + printf("RTC: zeroing CMOS RAM\n"); +#endif + + /* Setup the real time clock */ + rtc_write(RTC_CONFIG_B, RTC_CONFIG_B_24H); + /* Setup the frequency it operates at */ + rtc_write(RTC_CONFIG_A, RTC_CONFIG_A_REF_CLCK_32KHZ | + RTC_CONFIG_A_RATE_1024HZ); + /* Ensure all reserved bits are 0 in register D */ + rtc_write(RTC_CONFIG_D, RTC_CONFIG_D_VALID_RAM_AND_TIME); + + /* Clear any pending interrupts */ + rtc_read(RTC_CONFIG_C); +} #endif diff --git a/drivers/rtc/mvrtc.h b/drivers/rtc/mvrtc.h index ebddc124c3..424743c990 100644 --- a/drivers/rtc/mvrtc.h +++ b/drivers/rtc/mvrtc.h @@ -13,7 +13,7 @@ #define _MVRTC_H_ #include <asm/arch/soc.h> -#include <compiler.h> +#include <linux/compiler.h> /* RTC registers */ struct mvrtc_registers { diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 8f051914f5..af5beba39f 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -132,11 +132,12 @@ static void NS16550_setbrg(NS16550_t com_port, int baud_divisor) void NS16550_init(NS16550_t com_port, int baud_divisor) { -#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX)) +#if (defined(CONFIG_SPL_BUILD) && \ + (defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX))) /* - * On some OMAP3 devices when UART3 is configured for boot mode before - * SPL starts only THRE bit is set. We have to empty the transmitter - * before initialization starts. + * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode + * before SPL starts only THRE bit is set. We have to empty the + * transmitter before initialization starts. */ if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE)) == UART_LSR_THRE) { diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index b09053f140..d1b5777cec 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -39,7 +39,7 @@ static void serial_find_console_or_panic(void) /* Check for a chosen console */ node = fdtdec_get_chosen_node(gd->fdt_blob, "stdout-path"); if (node < 0) - node = fdtdec_get_alias_node(gd->fdt_blob, "console"); + node = fdt_path_offset(gd->fdt_blob, "console"); if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, &dev)) { gd->cur_serial_dev = dev; return; diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index 38dda91021..e1bf4965f9 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -72,30 +72,39 @@ static int pl01x_tstc(struct pl01x_regs *regs) static int pl01x_generic_serial_init(struct pl01x_regs *regs, enum pl01x_type type) { - unsigned int lcr; - + switch (type) { + case TYPE_PL010: + /* disable everything */ + writel(0, ®s->pl010_cr); + break; + case TYPE_PL011: #ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT - if (type == TYPE_PL011) { /* Empty RX fifo if necessary */ if (readl(®s->pl011_cr) & UART_PL011_CR_UARTEN) { while (!(readl(®s->fr) & UART_PL01x_FR_RXFE)) readl(®s->dr); } - } #endif + /* disable everything */ + writel(0, ®s->pl011_cr); + break; + default: + return -EINVAL; + } - /* First, disable everything */ - writel(0, ®s->pl010_cr); + return 0; +} - /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ +static int set_line_control(struct pl01x_regs *regs) +{ + unsigned int lcr; + /* + * Internal update of baud rate register require line + * control register write + */ lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN; - writel(lcr, ®s->pl011_lcrh); - - switch (type) { - case TYPE_PL010: - break; - case TYPE_PL011: { #ifdef CONFIG_PL011_SERIAL_RLCR + { int i; /* @@ -107,15 +116,9 @@ static int pl01x_generic_serial_init(struct pl01x_regs *regs, writel(lcr, ®s->fr); writel(lcr, ®s->pl011_rlcr); - /* lcrh needs to be set again for change to be effective */ - writel(lcr, ®s->pl011_lcrh); -#endif - break; - } - default: - return -EINVAL; } - +#endif + writel(lcr, ®s->pl011_lcrh); return 0; } @@ -175,6 +178,7 @@ static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type, writel(divider, ®s->pl011_ibrd); writel(fraction, ®s->pl011_fbrd); + set_line_control(regs); /* Finally, enable the UART */ writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE | UART_PL011_CR_RTS, ®s->pl011_cr); @@ -201,7 +205,7 @@ static void pl01x_serial_init_baud(int baudrate) base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX]; pl01x_generic_serial_init(base_regs, pl01x_type); - pl01x_generic_setbrg(base_regs, TYPE_PL010, clock, baudrate); + pl01x_generic_setbrg(base_regs, pl01x_type, clock, baudrate); } /* diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c index 6046efb51f..e8a1608b99 100644 --- a/drivers/serial/serial_uniphier.c +++ b/drivers/serial/serial_uniphier.c @@ -11,6 +11,7 @@ #include <dm/device.h> #include <dm/platform_data/serial-uniphier.h> #include <serial.h> +#include <fdtdec.h> #define UART_REG(x) \ u8 x; \ @@ -113,19 +114,21 @@ static int uniphier_serial_remove(struct udevice *dev) } #ifdef CONFIG_OF_CONTROL -static const struct udevice_id uniphier_uart_of_match = { - { .compatible = "panasonic,uniphier-uart"}, +static const struct udevice_id uniphier_uart_of_match[] = { + { .compatible = "panasonic,uniphier-uart" }, {}, }; static int uniphier_serial_ofdata_to_platdata(struct udevice *dev) { - /* - * TODO: Masahiro Yamada (yamada.m@jp.panasonic.com) - * - * Implement conversion code from DTB to platform data - * when supporting CONFIG_OF_CONTROL on UniPhir platform. - */ + struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); + DECLARE_GLOBAL_DATA_PTR; + + plat->base = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); + plat->uartclk = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "clock-frequency", 0); + + return 0; } #endif diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c index fd7fea8df5..857b60455a 100644 --- a/drivers/spi/ti_qspi.c +++ b/drivers/spi/ti_qspi.c @@ -102,7 +102,7 @@ static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave) struct spi_slave *slave = &qslave->slave; u32 memval = 0; -#ifdef CONFIG_DRA7XX +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) slave->memory_map = (void *)MMAP_START_ADDR_DRA; #else slave->memory_map = (void *)MMAP_START_ADDR_AM43x; @@ -244,7 +244,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, uint status; int timeout; -#ifdef CONFIG_DRA7XX +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) int val; #endif @@ -254,7 +254,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, /* Setup mmap flags */ if (flags & SPI_XFER_MMAP) { writel(MM_SWITCH, &qslave->base->memswitch); -#ifdef CONFIG_DRA7XX +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) val = readl(CORE_CTRL_IO); val |= MEM_CS; writel(val, CORE_CTRL_IO); @@ -262,7 +262,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, return 0; } else if (flags & SPI_XFER_MMAP_END) { writel(~MM_SWITCH, &qslave->base->memswitch); -#ifdef CONFIG_DRA7XX +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) val = readl(CORE_CTRL_IO); val &= MEM_CS_UNSELECT; writel(val, CORE_CTRL_IO); diff --git a/drivers/tpm/tpm.c b/drivers/tpm/tpm.c index bc0f9645b5..31761ec338 100644 --- a/drivers/tpm/tpm.c +++ b/drivers/tpm/tpm.c @@ -34,7 +34,7 @@ #include <config.h> #include <common.h> -#include <compiler.h> +#include <linux/compiler.h> #include <fdtdec.h> #include <i2c.h> #include <tpm.h> diff --git a/drivers/tpm/tpm_tis_i2c.c b/drivers/tpm/tpm_tis_i2c.c index 2dd8501f92..c1bbed4eb5 100644 --- a/drivers/tpm/tpm_tis_i2c.c +++ b/drivers/tpm/tpm_tis_i2c.c @@ -38,7 +38,7 @@ #include <common.h> #include <fdtdec.h> -#include <compiler.h> +#include <linux/compiler.h> #include <i2c.h> #include <tpm.h> #include <asm-generic/errno.h> diff --git a/drivers/usb/host/ehci-uniphier.c b/drivers/usb/host/ehci-uniphier.c index 77f6c9d9d1..32a4375279 100644 --- a/drivers/usb/host/ehci-uniphier.c +++ b/drivers/usb/host/ehci-uniphier.c @@ -6,10 +6,43 @@ */ #include <common.h> +#include <linux/err.h> #include <usb.h> #include <asm/arch/ehci-uniphier.h> #include "ehci.h" +#ifdef CONFIG_OF_CONTROL +#include <fdtdec.h> +DECLARE_GLOBAL_DATA_PTR; + +#define FDT gd->fdt_blob +#define COMPAT "panasonic,uniphier-ehci" + +static int get_uniphier_ehci_base(int index, struct ehci_hccr **base) +{ + int offset; + + for (offset = fdt_node_offset_by_compatible(FDT, 0, COMPAT); + offset >= 0; + offset = fdt_node_offset_by_compatible(FDT, offset, COMPAT)) { + if (index == 0) { + *base = (struct ehci_hccr *) + fdtdec_get_addr(FDT, offset, "reg"); + return 0; + } + index--; + } + + return -ENODEV; /* not found */ +} +#else +static int get_uniphier_ehci_base(int index, struct ehci_hccr **base) +{ + *base = (struct ehci_hccr *)uniphier_ehci_platdata[index].base; + return 0; +} +#endif + /* * Create the appropriate control structures to manage * a new EHCI host controller. @@ -17,12 +50,15 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { + int ret; struct ehci_hccr *cr; struct ehci_hcor *or; uniphier_ehci_reset(index, 0); - cr = (struct ehci_hccr *)(uniphier_ehci_platdata[index].base); + ret = get_uniphier_ehci_base(index, &cr); + if (ret < 0) + return ret; or = (void *)cr + HC_LENGTH(ehci_readl(&cr->cr_capbase)); *hccr = cr; diff --git a/drivers/usb/phy/omap_usb_phy.c b/drivers/usb/phy/omap_usb_phy.c index f78d532966..52a3664b99 100644 --- a/drivers/usb/phy/omap_usb_phy.c +++ b/drivers/usb/phy/omap_usb_phy.c @@ -118,7 +118,6 @@ void usb_phy_power(int on) void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs) { omap_usb_dpll_lock(phy_regs); - usb3_phy_partial_powerup(phy_regs); /* * Give enough time for the PHY to partially power-up before @@ -126,7 +125,6 @@ void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs) * team. */ mdelay(100); - usb3_phy_power(1); } static void omap_enable_usb3_phy(struct omap_xhci *omap) diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 7301be3955..00b563f26a 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o obj-$(CONFIG_VIDEO_TEGRA) += tegra.o obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o +obj-$(CONFIG_VIDEO_X86) += x86_fb.o obj-$(CONFIG_FORMIKE) += formike.o obj-$(CONFIG_AM335X_LCD) += am335x-fb.o obj-$(CONFIG_VIDEO_PARADE) += parade.o diff --git a/drivers/video/ati_radeon_fb.c b/drivers/video/ati_radeon_fb.c index 618f5d93b6..574895155d 100644 --- a/drivers/video/ati_radeon_fb.c +++ b/drivers/video/ati_radeon_fb.c @@ -19,6 +19,7 @@ #include <common.h> #include <command.h> +#include <bios_emul.h> #include <pci.h> #include <asm/processor.h> #include <asm/errno.h> @@ -544,7 +545,6 @@ void radeon_setmode_9200(int vesa_idx, int bpp) } #include "../bios_emulator/include/biosemu.h" -extern int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp); int radeon_probe(struct radeonfb_info *rinfo) { diff --git a/drivers/video/x86_fb.c b/drivers/video/x86_fb.c new file mode 100644 index 0000000000..8743a8c319 --- /dev/null +++ b/drivers/video/x86_fb.c @@ -0,0 +1,37 @@ +/* + * + * Vesa frame buffer driver for x86 + * + * Copyright (C) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <video_fb.h> +#include <vbe.h> +#include "videomodes.h" + +/* + * The Graphic Device + */ +GraphicDevice ctfb; + +void *video_hw_init(void) +{ + GraphicDevice *gdev = &ctfb; + int bits_per_pixel; + + printf("Video: "); + if (vbe_get_video_info(gdev)) { + printf("No video mode configured\n"); + return NULL; + } + + bits_per_pixel = gdev->gdfBytesPP * 8; + sprintf(gdev->modeIdent, "%dx%dx%d", gdev->winSizeX, gdev->winSizeY, + bits_per_pixel); + printf("%s\n", gdev->modeIdent); + + return (void *)gdev; +} diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c index 943b5bcf35..258b93791b 100644 --- a/fs/ext4/ext4fs.c +++ b/fs/ext4/ext4fs.c @@ -25,6 +25,7 @@ #include <ext_common.h> #include <ext4fs.h> #include "ext4_common.h" +#include <div64.h> int ext4fs_symlinknest; struct ext_filesystem ext_fs; @@ -67,11 +68,11 @@ int ext4fs_read_file(struct ext2fs_node *node, loff_t pos, if (len > filesize) len = filesize; - blockcnt = ((len + pos) + blocksize - 1) / blocksize; + blockcnt = lldiv(((len + pos) + blocksize - 1), blocksize); - for (i = pos / blocksize; i < blockcnt; i++) { + for (i = lldiv(pos, blocksize); i < blockcnt; i++) { lbaint_t blknr; - int blockoff = pos % blocksize; + int blockoff = pos - (blocksize * i); int blockend = blocksize; int skipfirst = 0; blknr = read_allocated_block(&(node->inode), i); @@ -82,7 +83,7 @@ int ext4fs_read_file(struct ext2fs_node *node, loff_t pos, /* Last block. */ if (i == blockcnt - 1) { - blockend = (len + pos) % blocksize; + blockend = (len + pos) - (blocksize * i); /* The last portion is exactly blocksize. */ if (!blockend) @@ -90,7 +91,7 @@ int ext4fs_read_file(struct ext2fs_node *node, loff_t pos, } /* First block. */ - if (i == pos / blocksize) { + if (i == lldiv(pos, blocksize)) { skipfirst = blockoff; blockend -= skipfirst; } diff --git a/fs/fat/fat_write.c b/fs/fat/fat_write.c index 88dd4959cc..98b88add83 100644 --- a/fs/fat/fat_write.c +++ b/fs/fat/fat_write.c @@ -13,6 +13,8 @@ #include <asm/byteorder.h> #include <part.h> #include <linux/ctype.h> +#include <div64.h> +#include <linux/math64.h> #include "fat.c" static void uppercase(char *str, int len) @@ -770,7 +772,7 @@ static void fill_dentry(fsdata *mydata, dir_entry *dentptr, */ static int check_overflow(fsdata *mydata, __u32 clustnum, loff_t size) { - __u32 startsect, sect_num; + __u32 startsect, sect_num, offset; if (clustnum > 0) { startsect = mydata->data_begin + @@ -779,13 +781,13 @@ static int check_overflow(fsdata *mydata, __u32 clustnum, loff_t size) startsect = mydata->rootdir_sect; } - sect_num = size / mydata->sect_size; - if (size % mydata->sect_size) + sect_num = div_u64_rem(size, mydata->sect_size, &offset); + + if (offset != 0) sect_num++; if (startsect + sect_num > cur_part_info.start + total_sector) return -1; - return 0; } @@ -23,6 +23,8 @@ #include <fs.h> #include <sandboxfs.h> #include <asm/io.h> +#include <div64.h> +#include <linux/math64.h> DECLARE_GLOBAL_DATA_PTR; @@ -399,7 +401,7 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], printf("%llu bytes read in %lu ms", len_read, time); if (time > 0) { puts(" ("); - print_size(len_read / time * 1000, "/s"); + print_size(div_u64(len_read, time) * 1000, "/s"); puts(")"); } puts("\n"); @@ -469,7 +471,7 @@ int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], printf("%llu bytes written in %lu ms", len, time); if (time > 0) { puts(" ("); - print_size(len / time * 1000, "/s"); + print_size(div_u64(len, time) * 1000, "/s"); puts(")"); } puts("\n"); diff --git a/include/bios_emul.h b/include/bios_emul.h new file mode 100644 index 0000000000..3643b82b3a --- /dev/null +++ b/include/bios_emul.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 1996-1999 SciTech Software, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _BIOS_EMUL_H +#define _BIOS_EMUL_H + +/* Include the register header directly here */ +#include "../drivers/bios_emulator/include/x86emu/regs.h" +#include <pci.h> + +/**************************************************************************** +REMARKS: +Data structure used to describe the details for the BIOS emulator system +environment as used by the X86 emulator library. + +HEADER: +biosemu.h + +MEMBERS: +vgaInfo - VGA BIOS information structure +biosmem_base - Base of the BIOS image +biosmem_limit - Limit of the BIOS image +busmem_base - Base of the VGA bus memory +****************************************************************************/ +typedef struct { + int function; + int device; + int bus; + u32 VendorID; + u32 DeviceID; + pci_dev_t pcidev; + void *BIOSImage; + u32 BIOSImageLen; + u8 LowMem[1536]; +} BE_VGAInfo; + +struct vbe_mode_info; + +int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int cleanUp); + +/* Run a BIOS ROM natively (only supported on x86 machines) */ +void bios_run_on_x86(pci_dev_t pcidev, unsigned long addr, int vesa_mode, + struct vbe_mode_info *mode_info); + +/** + * bios_set_interrupt_handler() - Install an interrupt handler for the BIOS + * + * This installs an interrupt handler that the BIOS will call when needed. + * + * @intnum: Interrupt number to install a handler for + * @int_handler_func: Function to call to handle interrupt + */ +void bios_set_interrupt_handler(int intnum, int (*int_handler_func)(void)); + +void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void)); + +int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo); + +int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len, + BE_VGAInfo *vga_info, int clean_up, int vesa_mode, + struct vbe_mode_info *mode_info); + +#endif diff --git a/include/common.h b/include/common.h index f1ab2cf5f4..46f07fe173 100644 --- a/include/common.h +++ b/include/common.h @@ -73,6 +73,9 @@ typedef volatile unsigned char vu_char; #ifdef CONFIG_ARM #define asmlinkage /* nothing */ #endif +#ifdef CONFIG_X86 +#define asmlinkage __attribute__((regparm(0))) +#endif #ifdef CONFIG_BLACKFIN #include <asm/blackfin.h> #endif @@ -442,11 +445,6 @@ extern ssize_t spi_read (uchar *, int, uchar *, int); extern ssize_t spi_write (uchar *, int, uchar *, int); #endif -#ifdef CONFIG_HERMES -/* $(BOARD)/hermes.c */ -void hermes_start_lxt980 (int speed); -#endif - #ifdef CONFIG_EVB64260 void evb64260_init(void); void debug_led(int, int); diff --git a/include/commproc.h b/include/commproc.h index d78ab0081c..6875c4c754 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -535,34 +535,6 @@ typedef struct scc_enet { #define SICR_ENET_CLKRT ((uint)0x00002600) #endif /* CONFIG_FPS850L, CONFIG_FPS860L */ -/*** HERMES-PRO ******************************************************/ - -/* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */ - -#ifdef CONFIG_HERMES - -#define FEC_ENET /* use FEC for EThernet */ -#undef SCC_ENET - - -#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ -#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ -#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ -#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ -#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ -#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ -#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ -#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ -#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ -#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ -#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ -#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ -#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ - -#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ - -#endif /* CONFIG_HERMES */ - /*** IP860 **********************************************************/ #if defined(CONFIG_IP860) diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index 120fdc6659..d23d2c4cc5 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -418,8 +418,6 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NOR_SUPPORT #define CONFIG_SPL_TEXT_BASE 0xfc000000 -#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/mpc5xxx" -#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ #define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 0fbfa3fb4c..09ee10c059 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -304,7 +304,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_LIBCOMMON_SUPPORT diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 8719f763dd..190ef0e71b 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -313,7 +313,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_LIBCOMMON_SUPPORT diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h new file mode 100644 index 0000000000..cc36330938 --- /dev/null +++ b/include/configs/beagle_x15.h @@ -0,0 +1,88 @@ +/* + * (C) Copyright 2014 + * Texas Instruments Incorporated. + * Felipe Balbi <balbi@ti.com> + * + * Configuration settings for the TI Beagle x15 board. + * See ti_omap5_common.h for omap5 common settings. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_BEAGLE_X15_H +#define __CONFIG_BEAGLE_X15_H + +#define CONFIG_AM57XX + +#define CONFIG_NR_DRAM_BANKS 2 + +#define CONFIG_ENV_SIZE (64 << 10) +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" + +#define CONFIG_CMD_SAVEENV + +#define CONSOLEDEV "ttyO2" +#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ +#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_OMAP_ABE_SYSCK + +/* Define the default GPT table for eMMC */ +#define PARTS_DEFAULT \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" + +#include <configs/ti_omap5_common.h> + +/* Enhance our eMMC support / experience. */ +#define CONFIG_CMD_GPT +#define CONFIG_EFI_PARTITION +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART + +/* CPSW Ethernet */ +#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ +#define CONFIG_CMD_DHCP +#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ +#define CONFIG_MII /* Required in net/eth.c */ +#define CONFIG_PHY_GIGE /* per-board part of CPSW */ +#define CONFIG_PHYLIB + +#define CONFIG_SUPPORT_EMMC_BOOT + +/* USB xHCI HOST */ +#define CONFIG_CMD_USB +#define CONFIG_USB_HOST +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_OMAP +#define CONFIG_USB_STORAGE +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 + +#define CONFIG_OMAP_USB_PHY +#define CONFIG_OMAP_USB3PHY1_HOST + +/* SATA */ +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_CMD_SCSI +#define CONFIG_LIBATA +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) + +#endif /* __CONFIG_BEAGLE_X5_H */ diff --git a/include/configs/chromebook_link.h b/include/configs/chromebook_link.h index 8caeca6430..645b31c2e2 100644 --- a/include/configs/chromebook_link.h +++ b/include/configs/chromebook_link.h @@ -21,7 +21,6 @@ #define CONFIG_DCACHE_RAM_MRC_VAR_SIZE 0x4000 #define CONFIG_SYS_X86_START16 0xfffff800 #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_DISPLAY_CPUINFO #define CONFIG_X86_RESET_VECTOR @@ -40,20 +39,9 @@ {PCI_VENDOR_ID_INTEL, \ PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE} -/* - * These common x86 features are not yet supported, but are added in - * follow-on patches in this series. Add undefs here to avoid every patch - * having to put things back into x86-common.h - */ -#undef CONFIG_VIDEO -#undef CONFIG_CFB_CONSOLE -#undef CONFIG_ICH_SPI -#undef CONFIG_SPI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_SF -#undef CONFIG_USB_EHCI -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_SCSI +#define CONFIG_X86_OPTION_ROM_FILENAME pci8086,0166.bin +#define CONFIG_X86_OPTION_ROM_ADDR 0xfff90000 +#define CONFIG_VIDEO_X86 #define CONFIG_PCI_MEM_BUS 0xe0000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS @@ -67,6 +55,18 @@ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0xefff +#define CONFIG_SYS_EARLY_PCI_INIT +#define CONFIG_PCI_PNP + +#define CONFIG_BIOSEMU +#define VIDEO_IO_OFFSET 0 +#define CONFIG_X86EMU_RAW_IO + +#define CONFIG_CROS_EC +#define CONFIG_CROS_EC_LPC +#define CONFIG_CMD_CROS_EC +#define CONFIG_ARCH_EARLY_INIT_R + #define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \ "stdout=vga,serial\0" \ "stderr=vga,serial\0" diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 1919cde79f..ccd9b88adc 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -321,7 +321,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index 641ab48c2c..92ce1e17da 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -16,7 +16,6 @@ #include <configs/ti_omap5_common.h> -#undef CONFIG_MISC_INIT_R #undef CONFIG_SPL_OS_BOOT /* Enable Generic board */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index ca624619a0..930b08e2f9 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -299,7 +299,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 2eaabdefee..174a711bb4 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -50,6 +50,7 @@ #define CONFIG_EFI_PARTITION #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART +#define CONFIG_HSMMC2_8BIT /* CPSW Ethernet */ #define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ diff --git a/include/configs/hermes.h b/include/configs/hermes.h deleted file mode 100644 index 736ffb613d..0000000000 --- a/include/configs/hermes.h +++ /dev/null @@ -1,315 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC860 1 /* This is a MPC860T CPU */ -#define CONFIG_HERMES 1 /* ...on a HERMES-PRO board */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_BOARD_TYPES 1 /* support board types */ - -#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ - -#define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */ -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 /* Non-Standard value! */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#ifdef DEBUG -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 124 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x4000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - * +0x0004 - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * +0x0000 => 0x000000C0 - */ -#define CONFIG_SYS_SIUMCR 0 - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - * +0x0200 => 0x00C2 - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - * +0x0240 => 0x0082 - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit, set PLL multiplication factor ! - */ -/* +0x0286 => 0x00B0D0C0 */ -#define CONFIG_SYS_PLPRCR \ - ( (11 << PLPRCR_MF_SHIFT) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | \ - /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \ - PLPRCR_CSR | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/ \ - ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -/* +0x0282 => 0x03800000 */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS | \ - SCCR_RTDIV | SCCR_RTSEL | \ - /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \ - SCCR_EBDF00 | SCCR_DFSYNC00 | \ - SCCR_DFBRG00 | SCCR_DFNL000 | \ - SCCR_DFNH000) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/* +0x0220 => 0x00C3 */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration Register 19-4 - *----------------------------------------------------------------------- - */ -/* +0x09C4 => TIMEP=1 */ -#define CONFIG_SYS_RCCR 0x0100 - -/*----------------------------------------------------------------------- - * RMDS - RISC Microcode Development Support Control Register - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RMDS 0 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFE000000 /* FLASH bank #0 */ - -/* used to re-map FLASH - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -/* allow for max 4 MB of Flash */ -#define CONFIG_SYS_REMAP_OR_AM 0xFFC00000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 1, CSNT = 1, SCY = 5, EHTR = 0 */ -#define CONFIG_SYS_OR_TIMING_FLASH ( OR_CSNT_SAM | /*OR_ACS_DIV4 |*/ OR_BI | \ - OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -/* 8 bit, bank valid */ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -/* - * BR1/OR1 - SDRAM - * - * Multiplexed addresses, GPL5 output to GPL5_A (don't care) - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank */ -#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ -#define SDRAM_TIMING 0x00000A00 /* SDRAM-Timing */ - -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */ - -#define CONFIG_SYS_OR1_PRELIM (SDRAM_PRELIM_OR_AM | SDRAM_TIMING ) -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* - * BR2/OR2 - HPRO2: PEB2256 @ 0xE0000000, 8 Bit wide - */ -#define HPRO2_BASE 0xE0000000 -#define HPRO2_OR_AM 0xFFFF8000 -#define HPRO2_TIMING 0x00000934 - -#define CONFIG_SYS_OR2 (HPRO2_OR_AM | HPRO2_TIMING) -#define CONFIG_SYS_BR2 ((HPRO2_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) - -/* - * BR3/OR3: not used - * BR4/OR4: not used - * BR5/OR5: not used - * BR6/OR6: not used - * BR7/OR7: not used - */ - -/* - * MAMR settings for SDRAM - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -#endif /* __CONFIG_H */ diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 5a5f9400c3..1b9c2773be 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -28,7 +28,6 @@ #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x00908000 #define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7" #define CONFIG_SPL_STACK 0x0091FFB8 #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT @@ -46,7 +45,7 @@ #if defined(CONFIG_SPL_MMC_SUPPORT) #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* offset 69KB */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024) #endif diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 58e7295690..d43db5288e 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -671,8 +671,6 @@ #define CONFIG_SPL_TEXT_BASE 0xffff0000 /* last 64 KiB for SPL */ #define CONFIG_SYS_SPL_MAX_LEN (64 << 10) #define CONFIG_UBOOT_PAD_TO 458752 /* decimal for 'dd' */ -#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/ppc4xx" -#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/ppc4xx/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */ #define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */ #define CONFIG_SPL_SERIAL_SUPPORT diff --git a/include/configs/mcx.h b/include/configs/mcx.h index b775ebd0ed..26eb220354 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -369,7 +369,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" /* NAND boot config */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 27bf89c114..8bdc08f586 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -75,7 +75,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" /* Partition tables */ diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h index 2daf13c642..1185f42550 100644 --- a/include/configs/omap3_evm_quick_mmc.h +++ b/include/configs/omap3_evm_quick_mmc.h @@ -87,7 +87,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif /* __OMAP3_EVM_QUICK_MMC_H */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index e8dc462f14..e07795f921 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -23,6 +23,7 @@ #define CONFIG_SYS_NS16550_COM3 UART3_BASE #define CONFIG_BAUDRATE 115200 +#define CONFIG_MISC_INIT_R /* MMC ENV related defines */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h deleted file mode 100644 index 73a95e615e..0000000000 --- a/include/configs/ph1_ld4.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PH1_XXX_H -#define __PH1_XXX_H - -/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* - * Serial Configuration - * SoC UART : enable CONFIG_UNIPHIER_SERIAL - * On-board UART: enable CONFIG_SYS_NS16550_SERIAL - */ -#if 0 -#define CONFIG_SYS_NS16550_SERIAL -#endif - -#define CONFIG_SMC911X - -#define CONFIG_DDR_NUM_CH0 1 -#define CONFIG_DDR_NUM_CH1 1 - -/* - * Memory Size & Mapping - */ -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x10000000 -#define CONFIG_SDRAM1_BASE 0x90000000 -#define CONFIG_SDRAM1_SIZE 0x10000000 - -#define CONFIG_SPL_TEXT_BASE 0x40000 - -#include "uniphier-common.h" - -#endif /* __PH1_XXX_H */ diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h deleted file mode 100644 index fc5132d1cc..0000000000 --- a/include/configs/ph1_pro4.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PH1_XXX_H -#define __PH1_XXX_H - -/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* - * Serial Configuration - * SoC UART : enable CONFIG_UNIPHIER_SERIAL - * On-board UART: enable CONFIG_SYS_NS16550_SERIAL - */ -#if 0 -#define CONFIG_SYS_NS16550_SERIAL -#endif - -#define CONFIG_SMC911X - -#define CONFIG_DDR_NUM_CH0 2 -#define CONFIG_DDR_NUM_CH1 2 - -#define CONFIG_UNIPHIER_SMP - -/* - * Memory Size & Mapping - */ -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x20000000 -#define CONFIG_SDRAM1_BASE 0xa0000000 -#define CONFIG_SDRAM1_SIZE 0x20000000 - -#define CONFIG_SPL_TEXT_BASE 0x100000 - -#include "uniphier-common.h" - -#endif /* __PH1_XXX_H */ diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h deleted file mode 100644 index e2f1102003..0000000000 --- a/include/configs/ph1_sld8.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PH1_XXX_H -#define __PH1_XXX_H - -/* - * Support Card Select - * - * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC. - * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card. - * CPLD is re-programmed for ARIMA board compatibility. - * No define - No support card. - */ - -#if 0 -#define CONFIG_PFC_MICRO_SUPPORT_CARD -#else -#define CONFIG_DCC_MICRO_SUPPORT_CARD -#endif - -/* - * Serial Configuration - * SoC UART : enable CONFIG_UNIPHIER_SERIAL - * On-board UART: enable CONFIG_SYS_NS16550_SERIAL - */ -#if 0 -#define CONFIG_SYS_NS16550_SERIAL -#endif - -#define CONFIG_SMC911X - -#define CONFIG_DDR_NUM_CH0 1 -#define CONFIG_DDR_NUM_CH1 1 - -/* #define CONFIG_DDR_STANDARD */ - -/* - * Memory Size & Mapping - */ -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x10000000 -#define CONFIG_SDRAM1_BASE 0x90000000 -#define CONFIG_SDRAM1_SIZE 0x10000000 - -#define CONFIG_SPL_TEXT_BASE 0x40000 - -#include "uniphier-common.h" - -#endif /* __PH1_XXX_H */ diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index d75d562963..946b2c85e9 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -150,4 +150,8 @@ #define CONFIG_SYS_CONSOLE_FG_COL 0x00 #endif +#ifndef CONFIG_SPL_BUILD +#define CONFIG_FIT +#endif + #endif /* ! __CONFIG_PXM2_H */ diff --git a/include/configs/rpi_b.h b/include/configs/rpi.h index 41e975fbcc..4d5426e501 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi.h @@ -105,15 +105,15 @@ /* Environment */ #define CONFIG_ENV_SIZE SZ_16K -#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_FAT_WRITE #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_SYS_LOAD_ADDR 0x1000000 #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_PREBOOT \ - "if load mmc 0:1 ${loadaddr} /uEnv.txt; then " \ - "env import -t -r ${loadaddr} ${filesize}; " \ - "fi" /* Shell */ #define CONFIG_SYS_MAXARGS 8 @@ -138,7 +138,6 @@ /* Some things don't make sense on this HW or yet */ #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SAVEENV /* Environment */ #define ENV_DEVICE_SETTINGS \ @@ -175,7 +174,6 @@ "pxefile_addr_r=0x00100000\0" \ "kernel_addr_r=0x01000000\0" \ "fdt_addr_r=0x02000000\0" \ - "fdtfile=bcm2835-rpi-b.dtb\0" \ "ramdisk_addr_r=0x02100000\0" \ #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/rut.h b/include/configs/rut.h index 6bddededae..0067ea46e0 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -154,4 +154,8 @@ #define CONFIG_SYS_CONSOLE_FG_COL 0x00 #endif +#ifndef CONFIG_SPL_BUILD +#define CONFIG_FIT +#endif + #endif /* ! __CONFIG_RUT_H */ diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 5b77db2698..d5588b1241 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -230,7 +230,7 @@ #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index dfbf3cb786..f2849d794e 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -276,7 +276,7 @@ #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 0d5dba18b1..21e13e5473 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -148,7 +148,7 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index a160329c1d..7d2c0d2fa7 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -304,7 +304,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 2fddef3cab..deb6bb2b8f 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -178,7 +178,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index aeabb1b7d5..87a4efcd5a 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -144,7 +144,7 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index a8790c2f8f..bc751722e8 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -233,7 +233,7 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ /* FAT sd card locations. */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #ifdef CONFIG_SPL_OS_BOOT diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 3166392c78..c47651d796 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -19,7 +19,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_MISC_INIT_R #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_CACHELINE_SIZE 64 @@ -79,7 +78,7 @@ "partitions=" PARTS_DEFAULT "\0" \ "optargs=\0" \ "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk1p2 rw\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext4 rootwait\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ @@ -118,6 +117,8 @@ "setenv fdtfile dra7-evm.dtb; fi;" \ "if test $board_name = dra72x; then " \ "setenv fdtfile dra72-evm.dtb; fi;" \ + "if test $board_name = beagle_x15; then " \ + "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 6e7a7fbf28..36621a553c 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -349,7 +349,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier.h index 7c4dba0387..dd022fb52d 100644 --- a/include/configs/uniphier-common.h +++ b/include/configs/uniphier.h @@ -10,10 +10,37 @@ #ifndef __CONFIG_UNIPHIER_COMMON_H__ #define __CONFIG_UNIPHIER_COMMON_H__ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) && \ - defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# error "Both CONFIG_PFC_MICRO_SUPPORT_CARD and CONFIG_DCC_MICRO_SUPPORT_CARD \ -are defined. Select only one of them." +#if defined(CONFIG_MACH_PH1_PRO4) +#define CONFIG_DDR_NUM_CH0 2 +#define CONFIG_DDR_NUM_CH1 2 + +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x20000000 +#define CONFIG_SDRAM1_BASE 0xa0000000 +#define CONFIG_SDRAM1_SIZE 0x20000000 +#endif + +#if defined(CONFIG_MACH_PH1_LD4) +#define CONFIG_DDR_NUM_CH0 1 +#define CONFIG_DDR_NUM_CH1 1 + +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x10000000 +#define CONFIG_SDRAM1_BASE 0x90000000 +#define CONFIG_SDRAM1_SIZE 0x10000000 +#endif + +#if defined(CONFIG_MACH_PH1_SLD8) +#define CONFIG_DDR_NUM_CH0 1 +#define CONFIG_DDR_NUM_CH1 1 + +/* Physical start address of SDRAM */ +#define CONFIG_SDRAM0_BASE 0x80000000 +#define CONFIG_SDRAM0_SIZE 0x10000000 +#define CONFIG_SDRAM1_BASE 0x90000000 +#define CONFIG_SDRAM1_SIZE 0x10000000 #endif /* @@ -40,6 +67,13 @@ are defined. Select only one of them." #define CONFIG_SYS_NS16550_REG_SIZE -2 #endif +/* TODO: move to Kconfig and device tree */ +#if 0 +#define CONFIG_SYS_NS16550_SERIAL +#endif + +#define CONFIG_SMC911X + #define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE #define CONFIG_SMC911X_32_BIT @@ -58,6 +92,7 @@ are defined. Select only one of them." #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) @@ -87,17 +122,7 @@ are defined. Select only one of them." #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_FLASH_BANKS_LIST {0x00000000} -# define CONFIG_SYS_FLASH_BANKS_SIZES {0x02000000} -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_FLASH_BANKS_LIST {0x04000000} -# define CONFIG_SYS_FLASH_BANKS_SIZES {0x04000000} -#endif +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2 /* serial console configuration */ #define CONFIG_BAUDRATE 115200 @@ -112,7 +137,6 @@ are defined. Select only one of them." #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -143,15 +167,6 @@ are defined. Select only one of them." */ #define CONFIG_ARP_TIMEOUT 500UL /* 0.5 msec */ -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_TIME -#define CONFIG_CMD_NAND /* NAND flash suppport */ - #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 2 #define CONFIG_SYS_NAND_ONFI_DETECTION @@ -167,7 +182,6 @@ are defined. Select only one of them." #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 /* USB */ -#define CONFIG_CMD_USB #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE @@ -216,7 +230,6 @@ are defined. Select only one of them." "image_offset=0x00080000\0" \ "image_size=0x00f00000\0" \ "verify=n\0" \ - "autostart=yes\0" \ "norboot=run add_default_bootargs;" \ "bootm $image_offset\0" \ "nandboot=run add_default_bootargs;" \ @@ -225,10 +238,6 @@ are defined. Select only one of them." "add_default_bootargs=setenv bootargs $bootargs" \ " console=ttyS0,$baudrate\0" \ -/* FIT support */ -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ - /* Open Firmware flat tree */ #define CONFIG_OF_LIBFDT @@ -248,6 +257,13 @@ are defined. Select only one of them." #define CONFIG_SYS_TEXT_BASE 0x84000000 +#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +#define CONFIG_SPL_TEXT_BASE 0x00040000 +#endif +#if defined(CONFIG_MACH_PH1_PRO4) +#define CONFIG_SPL_TEXT_BASE 0x00100000 +#endif + #define CONFIG_BOARD_POSTCLK_INIT #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index c39c568ff8..87b4fffeb9 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -265,7 +265,7 @@ #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" diff --git a/include/fdtdec.h b/include/fdtdec.h index 3da9fab95c..d2b665ca11 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -120,6 +120,9 @@ enum fdt_compat_id { COMPAT_INTEL_LPC, /* Intel Low Pin Count I/F */ COMPAT_INTEL_MICROCODE, /* Intel microcode update */ COMPAT_MEMORY_SPD, /* Memory SPD information */ + COMPAT_INTEL_PANTHERPOINT_AHCI, /* Intel Pantherpoint AHCI */ + COMPAT_INTEL_MODEL_206AX, /* Intel Model 206AX CPU */ + COMPAT_INTEL_GMA, /* Intel Graphics Media Accelerator */ COMPAT_COUNT, }; @@ -390,17 +393,6 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int node, int *seqp); /** - * Get the offset of the given alias node - * - * This looks up an alias in /aliases then finds the offset of that node. - * - * @param blob Device tree blob (if NULL, then error is returned) - * @param name Alias name, e.g. "console" - * @return Node offset referred to by that alias, or -ve FDT_ERR_... - */ -int fdtdec_get_alias_node(const void *blob, const char *name); - -/** * Get the offset of the given chosen node * * This looks up a property in /chosen containing the path to another node, diff --git a/include/linux/compat.h b/include/linux/compat.h index 47b0889739..b40133cb3c 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -215,13 +215,11 @@ typedef int wait_queue_head_t; #define cond_resched() do { } while (0) #define yield() do { } while (0) -#define __user #define __init #define __exit #define __devinit #define __devinitdata #define __devinitconst -#define __iomem #define kthread_create(...) __builtin_return_address(0) #define kthread_stop(...) do { } while (0) @@ -252,8 +250,6 @@ struct cdev { #define cdev_add(...) 0 #define cdev_del(...) do { } while (0) -#define MAX_ERRNO 4095 - #define prandom_u32(...) 0 typedef struct { diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 89fcae0983..0b616713cc 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -16,7 +16,9 @@ #define LLONG_MAX ((long long)(~0ULL>>1)) #define LLONG_MIN (-LLONG_MAX - 1) #define ULLONG_MAX (~0ULL) +#ifndef SIZE_MAX #define SIZE_MAX (~(size_t)0) +#endif #define U8_MAX ((u8)~0U) #define S8_MAX ((s8)(U8_MAX>>1)) diff --git a/include/linux/usb/xhci-omap.h b/include/linux/usb/xhci-omap.h index 82630adc71..cb166e6a6c 100644 --- a/include/linux/usb/xhci-omap.h +++ b/include/linux/usb/xhci-omap.h @@ -14,6 +14,10 @@ #define OMAP_XHCI_BASE 0x488d0000 #define OMAP_OCP1_SCP_BASE 0x4A081000 #define OMAP_OTG_WRAPPER_BASE 0x488c0000 +#elif defined CONFIG_AM57XX +#define OMAP_XHCI_BASE 0x48890000 +#define OMAP_OCP1_SCP_BASE 0x4A084c00 +#define OMAP_OTG_WRAPPER_BASE 0x48880000 #elif defined CONFIG_AM43XX #define OMAP_XHCI_BASE 0x483d0000 #define OMAP_OCP1_SCP_BASE 0x483E8000 diff --git a/include/mmc.h b/include/mmc.h index d74a190eea..adffc35af0 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -385,6 +385,7 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); int mmc_legacy_init(int verbose); #endif +void board_mmc_power_init(void); int board_mmc_init(bd_t *bis); int cpu_mmc_init(bd_t *bis); int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr); diff --git a/include/pci.h b/include/pci.h index d211351e44..216f4489e5 100644 --- a/include/pci.h +++ b/include/pci.h @@ -678,5 +678,28 @@ extern void pci_mpc824x_init (struct pci_controller *hose); extern void pci_mpc85xx_init (struct pci_controller *hose); #endif +/** + * pci_write_bar32() - Write the address of a BAR including control bits + * + * This writes a raw address (with control bits) to a bar + * + * @hose: PCI hose to use + * @dev: PCI device to update + * @barnum: BAR number (0-5) + * @addr: BAR address with control bits + */ +void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum, + u32 addr_and_ctrl); + +/** + * pci_read_bar32() - read the address of a bar + * + * @hose: PCI hose to use + * @dev: PCI device to inspect + * @barnum: BAR number (0-5) + * @return address of the bar, masking out any control bits + * */ +u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum); + #endif /* __ASSEMBLY__ */ #endif /* _PCI_H */ diff --git a/include/pci_ids.h b/include/pci_ids.h index f84c13ac64..ee98bee443 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -526,7 +526,19 @@ #define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302 #define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 #define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 -#define PCI_DEVICE_ID_AMD_15H_NB_MISC 0x1603 +#define PCI_DEVICE_ID_AMD_15H_M10H_F3 0x1403 +#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F3 0x141d +#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F4 0x141e +#define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600 +#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 +#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 +#define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603 +#define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604 +#define PCI_DEVICE_ID_AMD_15H_NB_F5 0x1605 +#define PCI_DEVICE_ID_AMD_16H_NB_F3 0x1533 +#define PCI_DEVICE_ID_AMD_16H_NB_F4 0x1534 +#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F3 0x1583 +#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F4 0x1584 #define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703 #define PCI_DEVICE_ID_AMD_LANCE 0x2000 #define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 @@ -569,8 +581,9 @@ #define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A #define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081 #define PCI_DEVICE_ID_AMD_LX_AES 0x2082 -#define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c #define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800 +#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b +#define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c #define PCI_VENDOR_ID_TRIDENT 0x1023 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000 @@ -616,6 +629,8 @@ #define PCI_DEVICE_ID_MATROX_G550 0x2527 #define PCI_DEVICE_ID_MATROX_VIA 0x4536 +#define PCI_VENDOR_ID_MOBILITY_ELECTRONICS 0x14f2 + #define PCI_VENDOR_ID_CT 0x102c #define PCI_DEVICE_ID_CT_69000 0x00c0 #define PCI_DEVICE_ID_CT_65545 0x00d8 @@ -724,6 +739,7 @@ #define PCI_DEVICE_ID_SI_7018 0x7018 #define PCI_VENDOR_ID_HP 0x103c +#define PCI_VENDOR_ID_HP_3PAR 0x1590 #define PCI_DEVICE_ID_HP_VISUALIZE_EG 0x1005 #define PCI_DEVICE_ID_HP_VISUALIZE_FX6 0x1006 #define PCI_DEVICE_ID_HP_VISUALIZE_FX4 0x1008 @@ -755,6 +771,8 @@ #define PCI_DEVICE_ID_HP_CISSD 0x3238 #define PCI_DEVICE_ID_HP_CISSE 0x323a #define PCI_DEVICE_ID_HP_CISSF 0x323b +#define PCI_DEVICE_ID_HP_CISSH 0x323c +#define PCI_DEVICE_ID_HP_CISSI 0x3239 #define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031 #define PCI_VENDOR_ID_PCTECH 0x1042 @@ -779,6 +797,29 @@ #define PCI_DEVICE_ID_ELSA_QS3000 0x3000 #define PCI_VENDOR_ID_STMICRO 0x104A +#define PCI_DEVICE_ID_STMICRO_USB_HOST 0xCC00 +#define PCI_DEVICE_ID_STMICRO_USB_OHCI 0xCC01 +#define PCI_DEVICE_ID_STMICRO_USB_OTG 0xCC02 +#define PCI_DEVICE_ID_STMICRO_UART_HWFC 0xCC03 +#define PCI_DEVICE_ID_STMICRO_UART_NO_HWFC 0xCC04 +#define PCI_DEVICE_ID_STMICRO_SOC_DMA 0xCC05 +#define PCI_DEVICE_ID_STMICRO_SATA 0xCC06 +#define PCI_DEVICE_ID_STMICRO_I2C 0xCC07 +#define PCI_DEVICE_ID_STMICRO_SPI_HS 0xCC08 +#define PCI_DEVICE_ID_STMICRO_MAC 0xCC09 +#define PCI_DEVICE_ID_STMICRO_SDIO_EMMC 0xCC0A +#define PCI_DEVICE_ID_STMICRO_SDIO 0xCC0B +#define PCI_DEVICE_ID_STMICRO_GPIO 0xCC0C +#define PCI_DEVICE_ID_STMICRO_VIP 0xCC0D +#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_DMA 0xCC0E +#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_SRCS 0xCC0F +#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_MSPS 0xCC10 +#define PCI_DEVICE_ID_STMICRO_CAN 0xCC11 +#define PCI_DEVICE_ID_STMICRO_MLB 0xCC12 +#define PCI_DEVICE_ID_STMICRO_DBP 0xCC13 +#define PCI_DEVICE_ID_STMICRO_SATA_PHY 0xCC14 +#define PCI_DEVICE_ID_STMICRO_ESRAM 0xCC15 +#define PCI_DEVICE_ID_STMICRO_VIC 0xCC16 #define PCI_VENDOR_ID_BUSLOGIC 0x104B #define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140 @@ -1294,6 +1335,8 @@ #define PCI_VENDOR_ID_TUNDRA 0x10e3 #define PCI_DEVICE_ID_TUNDRA_CA91C042 0x0000 +#define PCI_VENDOR_ID_AMCC 0x10e8 + #define PCI_VENDOR_ID_INTERG 0x10ea #define PCI_DEVICE_ID_INTERG_1682 0x1682 #define PCI_DEVICE_ID_INTERG_2000 0x2000 @@ -1322,6 +1365,7 @@ #define PCI_SUBDEVICE_ID_CREATIVE_SB08801 0x0041 #define PCI_SUBDEVICE_ID_CREATIVE_SB08802 0x0042 #define PCI_SUBDEVICE_ID_CREATIVE_SB08803 0x0043 +#define PCI_SUBDEVICE_ID_CREATIVE_SB1270 0x0062 #define PCI_SUBDEVICE_ID_CREATIVE_HENDRIX 0x6000 #define PCI_VENDOR_ID_ECTIVA 0x1102 /* duplicate: CREATIVE */ @@ -1411,6 +1455,7 @@ #define PCI_DEVICE_ID_VIA_CX700_IDE 0x0581 #define PCI_DEVICE_ID_VIA_VX800 0x8353 #define PCI_DEVICE_ID_VIA_VX855 0x8409 +#define PCI_DEVICE_ID_VIA_VX900 0x8410 #define PCI_DEVICE_ID_VIA_8371_1 0x8391 #define PCI_DEVICE_ID_VIA_82C598_1 0x8598 #define PCI_DEVICE_ID_VIA_838X_1 0xB188 @@ -1551,6 +1596,8 @@ #define PCI_DEVICE_ID_RICOH_RL5C476 0x0476 #define PCI_DEVICE_ID_RICOH_RL5C478 0x0478 #define PCI_DEVICE_ID_RICOH_R5C822 0x0822 +#define PCI_DEVICE_ID_RICOH_R5CE822 0xe822 +#define PCI_DEVICE_ID_RICOH_R5CE823 0xe823 #define PCI_DEVICE_ID_RICOH_R5C832 0x0832 #define PCI_DEVICE_ID_RICOH_R5C843 0x0843 @@ -1586,6 +1633,7 @@ #define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334 #define PCI_VENDOR_ID_MARVELL 0x11ab +#define PCI_VENDOR_ID_MARVELL_EXT 0x1b4b #define PCI_DEVICE_ID_MARVELL_GT64111 0x4146 #define PCI_DEVICE_ID_MARVELL_GT64260 0x6430 #define PCI_DEVICE_ID_MARVELL_MV64360 0x6460 @@ -1798,6 +1846,8 @@ #define PCI_VENDOR_ID_ESDGMBH 0x12fe #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 +#define PCI_VENDOR_ID_CB 0x1307 /* Measurement Computing */ + #define PCI_VENDOR_ID_SIIG 0x131f #define PCI_SUBVENDOR_ID_SIIG 0x131f #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 @@ -1860,8 +1910,23 @@ #define PCI_VENDOR_ID_QUATECH 0x135C #define PCI_DEVICE_ID_QUATECH_QSC100 0x0010 #define PCI_DEVICE_ID_QUATECH_DSC100 0x0020 +#define PCI_DEVICE_ID_QUATECH_DSC200 0x0030 +#define PCI_DEVICE_ID_QUATECH_QSC200 0x0040 #define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050 #define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060 +#define PCI_DEVICE_ID_QUATECH_QSCP100 0x0120 +#define PCI_DEVICE_ID_QUATECH_DSCP100 0x0130 +#define PCI_DEVICE_ID_QUATECH_QSCP200 0x0140 +#define PCI_DEVICE_ID_QUATECH_DSCP200 0x0150 +#define PCI_DEVICE_ID_QUATECH_QSCLP100 0x0170 +#define PCI_DEVICE_ID_QUATECH_DSCLP100 0x0180 +#define PCI_DEVICE_ID_QUATECH_DSC100E 0x0181 +#define PCI_DEVICE_ID_QUATECH_SSCLP100 0x0190 +#define PCI_DEVICE_ID_QUATECH_QSCLP200 0x01A0 +#define PCI_DEVICE_ID_QUATECH_DSCLP200 0x01B0 +#define PCI_DEVICE_ID_QUATECH_DSC200E 0x01B1 +#define PCI_DEVICE_ID_QUATECH_SSCLP200 0x01C0 +#define PCI_DEVICE_ID_QUATECH_ESCLP100 0x01E0 #define PCI_DEVICE_ID_QUATECH_SPPXP_100 0x0278 #define PCI_VENDOR_ID_SEALEVEL 0x135e @@ -1978,6 +2043,9 @@ #define PCI_DEVICE_ID_EXAR_XR17C152 0x0152 #define PCI_DEVICE_ID_EXAR_XR17C154 0x0154 #define PCI_DEVICE_ID_EXAR_XR17C158 0x0158 +#define PCI_DEVICE_ID_EXAR_XR17V352 0x0352 +#define PCI_DEVICE_ID_EXAR_XR17V354 0x0354 +#define PCI_DEVICE_ID_EXAR_XR17V358 0x0358 #define PCI_VENDOR_ID_MICROGATE 0x13c0 #define PCI_DEVICE_ID_MICROGATE_USC 0x0010 @@ -2002,6 +2070,10 @@ #define PCI_DEVICE_ID_CMEDIA_CM8738 0x0111 #define PCI_DEVICE_ID_CMEDIA_CM8738B 0x0112 +#define PCI_VENDOR_ID_ADVANTECH 0x13fe + +#define PCI_VENDOR_ID_MEILHAUS 0x1402 + #define PCI_VENDOR_ID_LAVA 0x1407 #define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */ #define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */ @@ -2047,6 +2119,8 @@ #define PCI_VENDOR_ID_CHELSIO 0x1425 +#define PCI_VENDOR_ID_ADLINK 0x144a + #define PCI_VENDOR_ID_SAMSUNG 0x144d #define PCI_VENDOR_ID_GIGABYTE 0x1458 @@ -2080,6 +2154,8 @@ #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150 +#define PCI_VENDOR_ID_AMPLICON 0x14dc + #define PCI_VENDOR_ID_BCM_GVC 0x14a4 #define PCI_VENDOR_ID_BROADCOM 0x14e4 #define PCI_DEVICE_ID_TIGON3_5752 0x1600 @@ -2100,19 +2176,25 @@ #define PCI_DEVICE_ID_NX2_57711E 0x1650 #define PCI_DEVICE_ID_TIGON3_5705 0x1653 #define PCI_DEVICE_ID_TIGON3_5705_2 0x1654 +#define PCI_DEVICE_ID_TIGON3_5719 0x1657 #define PCI_DEVICE_ID_TIGON3_5721 0x1659 #define PCI_DEVICE_ID_TIGON3_5722 0x165a #define PCI_DEVICE_ID_TIGON3_5723 0x165b #define PCI_DEVICE_ID_TIGON3_5705M 0x165d #define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e +#define PCI_DEVICE_ID_NX2_57712 0x1662 +#define PCI_DEVICE_ID_NX2_57712E 0x1663 +#define PCI_DEVICE_ID_NX2_57712_MF 0x1663 #define PCI_DEVICE_ID_TIGON3_5714 0x1668 #define PCI_DEVICE_ID_TIGON3_5714S 0x1669 #define PCI_DEVICE_ID_TIGON3_5780 0x166a #define PCI_DEVICE_ID_TIGON3_5780S 0x166b #define PCI_DEVICE_ID_TIGON3_5705F 0x166e +#define PCI_DEVICE_ID_NX2_57712_VF 0x166f #define PCI_DEVICE_ID_TIGON3_5754M 0x1672 #define PCI_DEVICE_ID_TIGON3_5755M 0x1673 #define PCI_DEVICE_ID_TIGON3_5756 0x1674 +#define PCI_DEVICE_ID_TIGON3_5750 0x1676 #define PCI_DEVICE_ID_TIGON3_5751 0x1677 #define PCI_DEVICE_ID_TIGON3_5715 0x1678 #define PCI_DEVICE_ID_TIGON3_5715S 0x1679 @@ -2124,6 +2206,9 @@ #define PCI_DEVICE_ID_TIGON3_5761E 0x1680 #define PCI_DEVICE_ID_TIGON3_5761 0x1681 #define PCI_DEVICE_ID_TIGON3_5764 0x1684 +#define PCI_DEVICE_ID_NX2_57800 0x168a +#define PCI_DEVICE_ID_NX2_57840 0x168d +#define PCI_DEVICE_ID_NX2_57810 0x168e #define PCI_DEVICE_ID_TIGON3_5787M 0x1693 #define PCI_DEVICE_ID_TIGON3_5782 0x1696 #define PCI_DEVICE_ID_TIGON3_5784 0x1698 @@ -2131,11 +2216,19 @@ #define PCI_DEVICE_ID_TIGON3_5787 0x169b #define PCI_DEVICE_ID_TIGON3_5788 0x169c #define PCI_DEVICE_ID_TIGON3_5789 0x169d +#define PCI_DEVICE_ID_NX2_57840_4_10 0x16a1 +#define PCI_DEVICE_ID_NX2_57840_2_20 0x16a2 +#define PCI_DEVICE_ID_NX2_57840_MF 0x16a4 +#define PCI_DEVICE_ID_NX2_57800_MF 0x16a5 #define PCI_DEVICE_ID_TIGON3_5702X 0x16a6 #define PCI_DEVICE_ID_TIGON3_5703X 0x16a7 #define PCI_DEVICE_ID_TIGON3_5704S 0x16a8 +#define PCI_DEVICE_ID_NX2_57800_VF 0x16a9 #define PCI_DEVICE_ID_NX2_5706S 0x16aa #define PCI_DEVICE_ID_NX2_5708S 0x16ac +#define PCI_DEVICE_ID_NX2_57840_VF 0x16ad +#define PCI_DEVICE_ID_NX2_57810_MF 0x16ae +#define PCI_DEVICE_ID_NX2_57810_VF 0x16af #define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6 #define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7 #define PCI_DEVICE_ID_TIGON3_5781 0x16dd @@ -2307,6 +2400,8 @@ #define PCI_VENDOR_ID_TOPSPIN 0x1867 +#define PCI_VENDOR_ID_COMMTECH 0x18f7 + #define PCI_VENDOR_ID_SILAN 0x1904 #define PCI_VENDOR_ID_RENESAS 0x1912 @@ -2316,6 +2411,11 @@ #define PCI_DEVICE_ID_RENESAS_SH7785 0x0007 #define PCI_DEVICE_ID_RENESAS_SH7786 0x0010 +#define PCI_VENDOR_ID_SOLARFLARE 0x1924 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0 0x0703 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1 0x6703 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000B 0x0710 + #define PCI_VENDOR_ID_TDI 0x192E #define PCI_DEVICE_ID_TDI_EHCI 0x0101 @@ -2414,6 +2514,11 @@ #define PCI_VENDOR_ID_AZWAVE 0x1a3b +#define PCI_VENDOR_ID_ASMEDIA 0x1b21 + +#define PCI_VENDOR_ID_CIRCUITCO 0x1cc8 +#define PCI_SUBSYSTEM_ID_CIRCUITCO_MINNOWBOARD 0x0001 + #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 @@ -2463,6 +2568,9 @@ #define PCI_VENDOR_ID_INTEL 0x8086 #define PCI_DEVICE_ID_INTEL_EESSC 0x0008 +#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100 +#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154 +#define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00 #define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320 #define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321 #define PCI_DEVICE_ID_INTEL_PXH_0 0x0329 @@ -2485,6 +2593,7 @@ #define PCI_DEVICE_ID_INTEL_MRST_SD2 0x084F #define PCI_DEVICE_ID_INTEL_I960 0x0960 #define PCI_DEVICE_ID_INTEL_I960RM 0x0962 +#define PCI_DEVICE_ID_INTEL_CENTERTON_ILB 0x0c60 #define PCI_DEVICE_ID_INTEL_82541ER 0x1078 #define PCI_DEVICE_ID_INTEL_82541GI_LF 0x107c #define PCI_DEVICE_ID_INTEL_82542 0x1000 @@ -2564,13 +2673,50 @@ #define PCI_DEVICE_ID_INTEL_COUGARPOINT_HDA 0x1c20 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN 0x1c41 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_Z68 0x1c44 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_P67 0x1c46 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_UM67 0x1c47 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_HM65 0x1c49 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_H67 0x1c4a +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_HM67 0x1c4b +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_Q65 0x1c4c +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_QS67 0x1c4d +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_Q67 0x1c4e +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_QM67 0x1c4f +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_B65 0x1c50 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_C202 0x1c52 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_C204 0x1c54 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_C206 0x1c56 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_H61 0x1c5c #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f -#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE 0x1e03 -#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_HDA 0x1e20 -#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e41 -#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC 0x1d40 +#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40 +#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE 0x1e03 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_HDA 0x1e20 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI 0x1e31 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e41 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_B75 0x1e49 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_C216 0x1e53 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_H77 0x1e4A +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_HM70 0x1e5e +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_HM75 0x1e5d +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_HM76 0x1e59 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_HM77 0x1e57 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MBL_SAMPLE 0x1e42 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_NM70 0x1e5f +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_Q75 0x1e48 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_Q77 0x1e47 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_QM77 0x1e55 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_QS77 0x1e56 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_SFF_SAMPLE 0x1e43 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_UM77 0x1e58 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_Z75 0x1e46 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_Z77 0x1e44 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f +#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310 +#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX 0x231f #define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 #define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411 #define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413 @@ -2783,8 +2929,30 @@ #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN 0x3b00 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX 0x3b1f #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB0 0x3c20 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB1 0x3c21 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB2 0x3c22 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB3 0x3c23 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB4 0x3c24 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB5 0x3c25 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB6 0x3c26 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB7 0x3c27 +#define PCI_DEVICE_ID_INTEL_IOAT_SNB8 0x3c2e +#define PCI_DEVICE_ID_INTEL_IOAT_SNB9 0x3c2f +#define PCI_DEVICE_ID_INTEL_UNC_HA 0x3c46 +#define PCI_DEVICE_ID_INTEL_UNC_IMC0 0x3cb0 +#define PCI_DEVICE_ID_INTEL_UNC_IMC1 0x3cb1 +#define PCI_DEVICE_ID_INTEL_UNC_IMC2 0x3cb4 +#define PCI_DEVICE_ID_INTEL_UNC_IMC3 0x3cb5 +#define PCI_DEVICE_ID_INTEL_UNC_QPI0 0x3c41 +#define PCI_DEVICE_ID_INTEL_UNC_QPI1 0x3c42 +#define PCI_DEVICE_ID_INTEL_UNC_R2PCIE 0x3c43 +#define PCI_DEVICE_ID_INTEL_UNC_R3QPI0 0x3c44 +#define PCI_DEVICE_ID_INTEL_UNC_R3QPI1 0x3c45 +#define PCI_DEVICE_ID_INTEL_JAKETOWN_UBOX 0x3ce0 #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f #define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 +#define PCI_DEVICE_ID_INTEL_5100_19 0x65f3 #define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 #define PCI_DEVICE_ID_INTEL_5100_22 0x65f6 #define PCI_DEVICE_ID_INTEL_5400_ERR 0x4030 @@ -2823,6 +2991,7 @@ #define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601 #define PCI_DEVICE_ID_INTEL_SCH_LPC 0x8119 #define PCI_DEVICE_ID_INTEL_SCH_IDE 0x811a +#define PCI_DEVICE_ID_INTEL_ITC_LPC 0x8186 #define PCI_DEVICE_ID_INTEL_82454GX 0x84c4 #define PCI_DEVICE_ID_INTEL_82450GX 0x84c5 #define PCI_DEVICE_ID_INTEL_82451NX 0x84ca @@ -2905,7 +3074,11 @@ #define PCI_DEVICE_ID_NETMOS_9845 0x9845 #define PCI_DEVICE_ID_NETMOS_9855 0x9855 #define PCI_DEVICE_ID_NETMOS_9865 0x9865 +#define PCI_DEVICE_ID_NETMOS_9900 0x9900 #define PCI_DEVICE_ID_NETMOS_9901 0x9901 +#define PCI_DEVICE_ID_NETMOS_9904 0x9904 +#define PCI_DEVICE_ID_NETMOS_9912 0x9912 +#define PCI_DEVICE_ID_NETMOS_9922 0x9922 #define PCI_VENDOR_ID_3COM_2 0xa727 @@ -2927,3 +3100,5 @@ #define PCI_VENDOR_ID_XEN 0x5853 #define PCI_DEVICE_ID_XEN_PLATFORM 0x0001 + +#define PCI_VENDOR_ID_OCZ 0x1b85 diff --git a/include/pci_rom.h b/include/pci_rom.h new file mode 100644 index 0000000000..8b2674cf87 --- /dev/null +++ b/include/pci_rom.h @@ -0,0 +1,58 @@ +/* + * From coreboot file of same name + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _PCI_ROM_H +#define _PCI_ROM_H + +#define PCI_ROM_HDR 0xaa55 +#define PCI_VGA_RAM_IMAGE_START 0xc0000 + +struct pci_rom_header { + uint16_t signature; + uint8_t size; + uint8_t init[3]; + uint8_t reserved[0x12]; + uint16_t data; +}; + +struct pci_rom_data { + uint32_t signature; + uint16_t vendor; + uint16_t device; + uint16_t reserved_1; + uint16_t dlen; + uint8_t drevision; + uint8_t class_lo; + uint16_t class_hi; + uint16_t ilen; + uint16_t irevision; + uint8_t type; + uint8_t indicator; + uint16_t reserved_2; +}; + + /** + * pci_run_vga_bios() - Run the VGA BIOS in an x86 PC + * + * @dev: Video device containing the BIOS + * @int15_handler: Function to call to handle int 0x15 + * @emulate: true to use the x86 emulator, false to run native + */ +int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), bool emulate); + +/** + * board_map_oprom_vendev() - map several PCI IDs to the one the ROM expects + * + * Some VGA option roms are used for several chipsets but they only have one + * PCI ID in their header. If we encounter such an option rom, we need to do + * the mapping ourselves. + * + * @vendev: Vendor and device for the video device + * @return standard vendor and device expected by the ROM + */ +uint32_t board_map_oprom_vendev(uint32_t vendev); + +#endif diff --git a/include/rtc.h b/include/rtc.h index c0349668bc..d11aa8baf9 100644 --- a/include/rtc.h +++ b/include/rtc.h @@ -50,4 +50,9 @@ void to_tm (int, struct rtc_time *); unsigned long mktime (unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); +/** + * rtc_init() - Set up the real time clock ready for use + */ +void rtc_init(void); + #endif /* _RTC_H_ */ diff --git a/include/twl4030.h b/include/twl4030.h index f33cd1eaed..50f8da822a 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -651,7 +651,7 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, /* For initializing power device */ void twl4030_power_init(void); /* For initializing mmc power */ -void twl4030_power_mmc_init(void); +void twl4030_power_mmc_init(int dev_index); /* * LED diff --git a/include/vbe.h b/include/vbe.h new file mode 100644 index 0000000000..d4056914c4 --- /dev/null +++ b/include/vbe.h @@ -0,0 +1,103 @@ +/****************************************************************************** + * Copyright (c) 2004, 2008 IBM Corporation + * Copyright (c) 2009 Pattrick Hueper <phueper@hueper.net> + * All rights reserved. + * + * SPDX-License-Identifier: BSD-2-Clause + * + * Contributors: + * IBM Corporation - initial implementation + *****************************************************************************/ +#ifndef _VBE_H +#define _VBE_H + +/* these structs are for input from and output to OF */ +struct __packed screen_info { + u8 display_type; /* 0=NONE, 1= analog, 2=digital */ + u16 screen_width; + u16 screen_height; + /* bytes per line in framebuffer, may be more than screen_width */ + u16 screen_linebytes; + u8 color_depth; /* color depth in bits per pixel */ + u32 framebuffer_address; + u8 edid_block_zero[128]; +}; + +struct __packed screen_info_input { + u8 signature[4]; + u16 size_reserved; + u8 monitor_number; + u16 max_screen_width; + u8 color_depth; +}; + +/* these structs only store the required a subset of the VBE-defined fields */ +struct __packed vbe_info { + char signature[4]; + u16 version; + u8 *oem_string_ptr; + u32 capabilities; + u16 video_mode_list[256]; + u16 total_memory; +}; + +struct __packed vesa_mode_info { + u16 mode_attributes; /* 00 */ + u8 win_a_attributes; /* 02 */ + u8 win_b_attributes; /* 03 */ + u16 win_granularity; /* 04 */ + u16 win_size; /* 06 */ + u16 win_a_segment; /* 08 */ + u16 win_b_segment; /* 0a */ + u32 win_func_ptr; /* 0c */ + u16 bytes_per_scanline; /* 10 */ + u16 x_resolution; /* 12 */ + u16 y_resolution; /* 14 */ + u8 x_charsize; /* 16 */ + u8 y_charsize; /* 17 */ + u8 number_of_planes; /* 18 */ + u8 bits_per_pixel; /* 19 */ + u8 number_of_banks; /* 20 */ + u8 memory_model; /* 21 */ + u8 bank_size; /* 22 */ + u8 number_of_image_pages; /* 23 */ + u8 reserved_page; + u8 red_mask_size; + u8 red_mask_pos; + u8 green_mask_size; + u8 green_mask_pos; + u8 blue_mask_size; + u8 blue_mask_pos; + u8 reserved_mask_size; + u8 reserved_mask_pos; + u8 direct_color_mode_info; + u32 phys_base_ptr; + u32 offscreen_mem_offset; + u16 offscreen_mem_size; + u8 reserved[206]; +}; + +struct vbe_mode_info { + u16 video_mode; + bool valid; + union { + struct vesa_mode_info vesa; + u8 mode_info_block[256]; + }; +}; + +struct vbe_ddc_info { + u8 port_number; /* i.e. monitor number */ + u8 edid_transfer_time; + u8 ddc_level; + u8 edid_block_zero[128]; +}; + +#define VESA_GET_INFO 0x4f00 +#define VESA_GET_MODE_INFO 0x4f01 +#define VESA_SET_MODE 0x4f02 + +struct graphic_device; +int vbe_get_video_info(struct graphic_device *gdev); + +#endif diff --git a/include/video_fb.h b/include/video_fb.h index 6cd4e377c2..55ec24dbee 100644 --- a/include/video_fb.h +++ b/include/video_fb.h @@ -40,7 +40,7 @@ /* Export Graphic Driver Control */ /******************************************************************************/ -typedef struct { +typedef struct graphic_device { unsigned int isaBase; unsigned int pciBase; unsigned int dprBase; diff --git a/lib/Makefile b/lib/Makefile index 320197a520..3ceb69752c 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -11,14 +11,12 @@ obj-$(CONFIG_RSA) += rsa/ obj-$(CONFIG_LZMA) += lzma/ obj-$(CONFIG_LZO) += lzo/ obj-$(CONFIG_ZLIB) += zlib/ +obj-$(CONFIG_BZIP2) += bzip2/ obj-$(CONFIG_TIZEN) += tizen/ +obj-$(CONFIG_OF_LIBFDT) += libfdt/ +obj-$(CONFIG_FIT) += libfdt/ obj-$(CONFIG_AES) += aes.o -obj-$(CONFIG_BZIP2) += bzlib.o -obj-$(CONFIG_BZIP2) += bzlib_crctable.o -obj-$(CONFIG_BZIP2) += bzlib_decompress.o -obj-$(CONFIG_BZIP2) += bzlib_randtable.o -obj-$(CONFIG_BZIP2) += bzlib_huffman.o obj-$(CONFIG_USB_TTY) += circbuf.o obj-y += crc7.o obj-y += crc8.o diff --git a/lib/bzip2/Makefile b/lib/bzip2/Makefile new file mode 100644 index 0000000000..929c24e228 --- /dev/null +++ b/lib/bzip2/Makefile @@ -0,0 +1,2 @@ +obj-y += bzlib.o bzlib_crctable.o bzlib_decompress.o \ + bzlib_randtable.o bzlib_huffman.o diff --git a/lib/bzlib.c b/lib/bzip2/bzlib.c index 5844e187c0..5844e187c0 100644 --- a/lib/bzlib.c +++ b/lib/bzip2/bzlib.c diff --git a/lib/bzlib_crctable.c b/lib/bzip2/bzlib_crctable.c index 325b96643e..325b96643e 100644 --- a/lib/bzlib_crctable.c +++ b/lib/bzip2/bzlib_crctable.c diff --git a/lib/bzlib_decompress.c b/lib/bzip2/bzlib_decompress.c index 4412b8a23e..4412b8a23e 100644 --- a/lib/bzlib_decompress.c +++ b/lib/bzip2/bzlib_decompress.c diff --git a/lib/bzlib_huffman.c b/lib/bzip2/bzlib_huffman.c index 801b8ec39a..801b8ec39a 100644 --- a/lib/bzlib_huffman.c +++ b/lib/bzip2/bzlib_huffman.c diff --git a/lib/bzlib_private.h b/lib/bzip2/bzlib_private.h index 87d8f94525..87d8f94525 100644 --- a/lib/bzlib_private.h +++ b/lib/bzip2/bzlib_private.h diff --git a/lib/bzlib_randtable.c b/lib/bzip2/bzlib_randtable.c index c3dc7e4181..c3dc7e4181 100644 --- a/lib/bzlib_randtable.c +++ b/lib/bzip2/bzlib_randtable.c diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 7c7e673aeb..9d86dba329 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -75,6 +75,9 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(COMPAT_INTEL_LPC, "intel,lpc"), COMPAT(INTEL_MICROCODE, "intel,microcode"), COMPAT(MEMORY_SPD, "memory-spd"), + COMPAT(INTEL_PANTHERPOINT_AHCI, "intel,pantherpoint-ahci"), + COMPAT(INTEL_MODEL_206AX, "intel,model-206ax"), + COMPAT(INTEL_GMA, "intel,gma"), }; const char *fdtdec_get_compatible(enum fdt_compat_id id) @@ -370,21 +373,6 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int offset, return -ENOENT; } -int fdtdec_get_alias_node(const void *blob, const char *name) -{ - const char *prop; - int alias_node; - int len; - - if (!blob) - return -FDT_ERR_NOTFOUND; - alias_node = fdt_path_offset(blob, "/aliases"); - prop = fdt_getprop(blob, alias_node, name, &len); - if (!prop) - return -FDT_ERR_NOTFOUND; - return fdt_path_offset(blob, prop); -} - int fdtdec_get_chosen_node(const void *blob, const char *name) { const char *prop; diff --git a/lib/libfdt/Makefile b/lib/libfdt/Makefile index 6fe79e0b06..2f5413f90d 100644 --- a/lib/libfdt/Makefile +++ b/lib/libfdt/Makefile @@ -5,8 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o \ +obj-y += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o \ fdt_empty_tree.o fdt_addresses.o - -obj-$(CONFIG_OF_LIBFDT) += $(COBJS-libfdt) -obj-$(CONFIG_FIT) += $(COBJS-libfdt) diff --git a/lib/zlib/zlib.h b/lib/zlib/zlib.h index 556be32754..af3703e6d7 100644 --- a/lib/zlib/zlib.h +++ b/lib/zlib/zlib.h @@ -3,7 +3,7 @@ #define __GLUE_ZLIB_H__ #include <common.h> -#include <compiler.h> +#include <linux/compiler.h> #include <asm/unaligned.h> #include <watchdog.h> #include "u-boot/zlib.h" diff --git a/net/bootp.c b/net/bootp.c index d4c86cf179..81066015f1 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -145,8 +145,6 @@ static void BootpCopyNetParams(struct Bootp_t *bp) if (tmp_ip != 0) NetCopyIP(&NetServerIP, &bp->bp_siaddr); memcpy(NetServerEther, ((struct ethernet_hdr *)NetRxPacket)->et_src, 6); -#endif - NetCopyIP(&NetOurIP, &bp->bp_yiaddr); if (strlen(bp->bp_file) > 0) copy_filename(BootFile, bp->bp_file, sizeof(BootFile)); @@ -158,6 +156,8 @@ static void BootpCopyNetParams(struct Bootp_t *bp) */ if (*BootFile) setenv("bootfile", BootFile); +#endif + NetCopyIP(&NetOurIP, &bp->bp_yiaddr); } static int truncate_sz(const char *name, int maxlen, int curlen) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 9d1383a38f..13af604e5f 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -260,11 +260,13 @@ quiet_cmd_dt_S_dtb= DTB $@ cmd_dt_S_dtb= \ ( \ echo '.section .dtb.init.rodata,"a"'; \ + echo '.balign 16'; \ echo '.global __dtb_$(*F)_begin'; \ echo '__dtb_$(*F)_begin:'; \ echo '.incbin "$<" '; \ echo '__dtb_$(*F)_end:'; \ echo '.global __dtb_$(*F)_end'; \ + echo '.balign 16'; \ ) > $@ $(obj)/%.dtb.S: $(obj)/%.dtb diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 1905446880..ecf3037cb8 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -34,6 +34,7 @@ SPL_BIN := u-boot-spl endif include $(srctree)/config.mk +include $(srctree)/arch/$(ARCH)/Makefile # Enable garbage collection of un-used sections for SPL KBUILD_CFLAGS += -ffunction-sections -fdata-sections @@ -45,21 +46,6 @@ cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) -ifdef CONFIG_SPL_START_S_PATH -START_PATH := $(CONFIG_SPL_START_S_PATH:"%"=%) -else -START_PATH := $(CPUDIR) -endif - -head-y := $(START_PATH)/start.o -head-$(CONFIG_X86) += $(START_PATH)/start16.o $(START_PATH)/resetvec.o -head-$(CONFIG_4xx) += $(START_PATH)/resetvec.o -head-$(CONFIG_MPC85xx) += $(START_PATH)/resetvec.o - -libs-y += arch/$(ARCH)/lib/ - -libs-y += $(CPUDIR)/ - libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ @@ -94,13 +80,6 @@ libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/ libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/ libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/ -ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35)) -libs-y += arch/$(ARCH)/imx-common/ -endif - -libs-$(CONFIG_ARM) += arch/arm/cpu/ -libs-$(CONFIG_PPC) += arch/powerpc/cpu/ - head-y := $(addprefix $(obj)/,$(head-y)) libs-y := $(addprefix $(obj)/,$(libs-y)) u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 7717d689bf..368a20e2cc 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -835,8 +835,7 @@ sub top_of_kernel_tree { if ($lk_path ne "" && substr($lk_path,length($lk_path)-1,1) ne "/") { $lk_path .= "/"; } - if ( (-f "${lk_path}CREDITS") - && (-f "${lk_path}Kbuild") + if ( (-f "${lk_path}Kbuild") && (-f "${lk_path}MAINTAINERS") && (-f "${lk_path}Makefile") && (-f "${lk_path}README") diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index a26cc5d2a9..72c9dba84c 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -548,7 +548,7 @@ static void get_prompt_str(struct gstr *r, struct property *prop, { int i, j; struct menu *submenu[8], *menu, *location = NULL; - struct jump_key *jump; + struct jump_key *jump = NULL; str_printf(r, _("Prompt: %s\n"), _(prop->text)); menu = prop->menu->parent; @@ -586,7 +586,7 @@ static void get_prompt_str(struct gstr *r, struct property *prop, str_printf(r, _(" Location:\n")); for (j = 4; --i >= 0; j += 2) { menu = submenu[i]; - if (head && location && menu == location) + if (jump && menu == location) jump->offset = strlen(r->s); str_printf(r, "%*c-> %s", j, ' ', _(menu_get_prompt(menu))); diff --git a/tools/.gitignore b/tools/.gitignore index e7f0f8ff72..9bc9fecf7b 100644 --- a/tools/.gitignore +++ b/tools/.gitignore @@ -4,6 +4,7 @@ /fit_check_sign /fit_info /gen_eth_addr +/ifdtool /img2srec /kwboot /dumpimage diff --git a/tools/buildman/README b/tools/buildman/README index 8ba19ec103..bfb2f180c2 100644 --- a/tools/buildman/README +++ b/tools/buildman/README @@ -85,10 +85,10 @@ branch. Put all your commits in a branch, set the branch's upstream to a valid value, and all will be well. Otherwise buildman will perform random actions. Use -n to check what the random actions might be. -If you just want to build the current source tree, leave off the -b flag. -This will display results and errors as they happen. You can still look -at them later using -s. Note that buildman will assume that the source -has changed, and will build all specified boards in this case. +If you just want to build the current source tree, leave off the -b flag +and add -e. This will display results and errors as they happen. You can +still look at them later using -se. Note that buildman will assume that the +source has changed, and will build all specified boards in this case. Buildman is optimised for building many commits at once, for many boards. On multi-core machines, Buildman is fast because it uses most of the @@ -693,9 +693,9 @@ Quick Sanity Check ================== If you have made changes and want to do a quick sanity check of the -currently-checked-out source, run buildman without the -b flag. This will -build the selected boards and display build status and errors as it runs -(i.e. -v amd -e are enabled automatically). +currently checked-out source, run buildman without the -b flag. This will +build the selected boards and display build status as it runs (i.e. -v is +enabled automatically). Use -e to see errors/warnings as well. Other options @@ -752,7 +752,7 @@ an error and green indicating that a commit fixed an error. Use the -e flag to see the full errors and -l to see which boards caused which errors. If you really want to see build results as they happen, use -v when doing a -build (-e will be enabled automatically). +build (and -e to see the errors/warnings too). You don't need to stick around on that branch while buildman is running. It checks out its own copy of the source code, so you can change branches, @@ -816,11 +816,10 @@ TODO This has mostly be written in my spare time as a response to my difficulties in testing large series of patches. Apart from tidying up there is quite a -bit of scope for improvement. Things like better error diffs, easier access -to log files, error display while building. Also it would be nice it buildman -could 'hunt' for problems, perhaps by building a few boards for each arch, -or checking commits for changed files and building only boards which use -those files. +bit of scope for improvement. Things like better error diffs and easier +access to log files. Also it would be nice it buildman could 'hunt' for +problems, perhaps by building a few boards for each arch, or checking +commits for changed files and building only boards which use those files. Credits diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py index 8155c1681e..7002034221 100644 --- a/tools/buildman/builder.py +++ b/tools/buildman/builder.py @@ -918,7 +918,8 @@ class Builder: if self._list_error_boards: names = [] for board in line_boards[line]: - names.append(board.target) + if not board.target in names: + names.append(board.target) names_str = '(%s) ' % ','.join(names) else: names_str = '' diff --git a/tools/buildman/builderthread.py b/tools/buildman/builderthread.py index a9cf68a801..bc4541cb3e 100644 --- a/tools/buildman/builderthread.py +++ b/tools/buildman/builderthread.py @@ -332,7 +332,7 @@ class BuilderThread(threading.Thread): # Now write the actual build output if keep_outputs: - patterns = ['u-boot', '*.bin', 'u-boot.dtb', '*.map', + patterns = ['u-boot', '*.bin', 'u-boot.dtb', '*.map', '*.img', 'include/autoconf.mk', 'spl/u-boot-spl', 'spl/u-boot-spl.bin'] for pattern in patterns: diff --git a/tools/buildman/control.py b/tools/buildman/control.py index 8b8c826002..2c3ba8b77f 100644 --- a/tools/buildman/control.py +++ b/tools/buildman/control.py @@ -70,7 +70,7 @@ def ShowActions(series, why_selected, boards_selected, builder, options): if commits: for upto in range(0, len(series.commits), options.step): commit = series.commits[upto] - print ' ', col.Color(col.YELLOW, commit.hash, bright=False), + print ' ', col.Color(col.YELLOW, commit.hash[:8], bright=False), print commit.subject print for arg in why_selected: @@ -188,7 +188,6 @@ def DoBuildman(options, args, toolchains=None, make_func=None, boards=None, else: series = None options.verbose = True - options.show_errors = True # By default we have one thread per CPU. But if there are not enough jobs # we can have fewer threads and use a high '-j' value for make. diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py index d630157f8f..da0488337b 100644 --- a/tools/patman/patchstream.py +++ b/tools/patman/patchstream.py @@ -248,8 +248,7 @@ class PatchStream: # Detect the start of a new commit elif commit_match: self.CloseCommit() - # TODO: We should store the whole hash, and just display a subset - self.commit = commit.Commit(commit_match.group(1)[:8]) + self.commit = commit.Commit(commit_match.group(1)) # Detect tags in the commit message elif tag_match: |