diff options
78 files changed, 966 insertions, 486 deletions
@@ -3483,9 +3483,6 @@ FIT uImage format: Adds the MTD partitioning infrastructure from the Linux kernel. Needed for UBI support. - CONFIG_MTD_NAND_VERIFY_WRITE - verify if the written data is correct reread. - - UBI support CONFIG_CMD_UBI diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9292e9878d..80b0d34190 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -428,6 +428,10 @@ config ARCH_KEYSTONE select CPU_V7 select SUPPORT_SPL +config ARCH_MX6 + bool "Freescale MX6" + select CPU_V7 + config TARGET_M53EVK bool "Support m53evk" select CPU_V7 @@ -730,6 +734,8 @@ source "arch/arm/mach-keystone/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" +source "arch/arm/cpu/armv7/mx6/Kconfig" + source "arch/arm/mach-nomadik/Kconfig" source "arch/arm/cpu/armv7/omap3/Kconfig" @@ -756,6 +762,8 @@ source "arch/arm/cpu/armv7/Kconfig" source "arch/arm/cpu/armv8/Kconfig" +source "arch/arm/imx-common/Kconfig" + source "board/aristainetos/Kconfig" source "board/BuR/kwb/Kconfig" source "board/BuR/tseries/Kconfig" diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig new file mode 100644 index 0000000000..076ba520c6 --- /dev/null +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -0,0 +1,42 @@ +if ARCH_MX6 + +config MX6 + bool + default y + +config MX6D + bool + +config MX6DL + bool + +config MX6Q + bool + +config MX6QDL + bool + +config MX6S + bool + +config MX6SL + bool + +config MX6SX + bool + +choice + prompt "MX6 board select" + +config TARGET_SECOMX6 + bool "Support secomx6 boards" + select CPU_V7 + +endchoice + +config SYS_SOC + default "mx6" + +source "board/seco/Kconfig" + +endif diff --git a/arch/arm/imx-common/Kconfig b/arch/arm/imx-common/Kconfig new file mode 100644 index 0000000000..37b375249d --- /dev/null +++ b/arch/arm/imx-common/Kconfig @@ -0,0 +1,2 @@ +config IMX_CONFIG + string diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c index 5427de5634..ca40cea9ad 100644 --- a/board/prodrive/alpr/nand.c +++ b/board/prodrive/alpr/nand.c @@ -93,19 +93,6 @@ static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) } } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - int i; - - for (i = 0; i < len; i++) - if (buf[i] != readb(&(alpr_ndfc->data))) - return i; - - return 0; -} -#endif - static int alpr_nand_dev_ready(struct mtd_info *mtd) { /* @@ -130,9 +117,6 @@ int board_nand_init(struct nand_chip *nand) nand->read_byte = alpr_nand_read_byte; nand->write_buf = alpr_nand_write_buf; nand->read_buf = alpr_nand_read_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - nand->verify_buf = alpr_nand_verify_buf; -#endif nand->dev_ready = alpr_nand_dev_ready; return 0; diff --git a/board/seco/Kconfig b/board/seco/Kconfig new file mode 100644 index 0000000000..dcb1ac81e0 --- /dev/null +++ b/board/seco/Kconfig @@ -0,0 +1,63 @@ +if TARGET_SECOMX6 + +choice + prompt "SECO i.MX6 Board variant" + +config SECOMX6_Q7 + bool "Q7" + +config SECOMX6_UQ7 + bool "uQ7" + +config SECOMX6_USBC + bool "uSBC" + +endchoice + +choice + prompt "SECO i.MX6 SoC variant" + +config SECOMX6Q + bool "i.MX6Q" + select MX6Q + +config SECOMX6DL + bool "i.MX6DL" + select MX6DL + +config SECOMX6S + bool "i.MX6S" + select MX6S + +endchoice + +choice + prompt "DDR size" + +config SECOMX6_512MB + bool "512MB" + +config SECOMX6_1GB + bool "1GB" + +config SECOMX6_2GB + bool "2GB" + +config SECOMX6_4GB + bool "4GB" + +endchoice + +config IMX_CONFIG + default "board/seco/mx6quq7/mx6quq7-2g.cfg" if SECOMX6_UQ7 && SECOMX6Q && SECOMX6_2GB + +config SYS_BOARD + default "mx6quq7" if SECOMX6_UQ7 && SECOMX6Q + +config SYS_VENDOR + default "seco" + +config SYS_CONFIG_NAME + default "secomx6quq7" if SECOMX6_UQ7 && SECOMX6Q + +endif diff --git a/board/seco/common/Makefile b/board/seco/common/Makefile new file mode 100644 index 0000000000..9e37ebbb92 --- /dev/null +++ b/board/seco/common/Makefile @@ -0,0 +1,2 @@ + +obj-$(CONFIG_TARGET_SECOMX6) += mx6.o diff --git a/board/seco/common/mx6.c b/board/seco/common/mx6.c new file mode 100644 index 0000000000..2f14f59f3c --- /dev/null +++ b/board/seco/common/mx6.c @@ -0,0 +1,138 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * Copyright (C) 2015 ECA Sinters + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * Modified by: Boris Brezillon <boris.brezillon@free-electrons.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6-pins.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/boot_mode.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/arch/mxc_hdmi.h> +#include <asm/arch/crm_regs.h> +#include <linux/fb.h> +#include <ipu_pixfmt.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <micrel.h> +#include <asm/imx-common/mxc_i2c.h> +#include <i2c.h> + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart2_pads[] = { + MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +void seco_mx6_setup_uart_iomux(void) +{ + imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); +} + +#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | \ + PAD_CTL_HYS) + +static iomux_v3_cfg_t const enet_pads[] = { + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +void seco_mx6_setup_enet_iomux(void) +{ + imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); +} + +int seco_mx6_rgmii_rework(struct phy_device *phydev) +{ + /* control data pad skew - devaddr = 0x02, register = 0x04 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); + /* rx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); + /* tx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); + + /* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF); + return 0; +} + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | \ + PAD_CTL_HYS) + +static iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc4_pads[] = { + MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +void seco_mx6_setup_usdhc_iomux(int id) +{ + switch (id) { + case 3: + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, + ARRAY_SIZE(usdhc3_pads)); + break; + + case 4: + imx_iomux_v3_setup_multiple_pads(usdhc4_pads, + ARRAY_SIZE(usdhc4_pads)); + break; + + default: + printf("Warning: invalid usdhc id (%d)\n", id); + break; + } +} diff --git a/board/seco/common/mx6.h b/board/seco/common/mx6.h new file mode 100644 index 0000000000..a05db673e2 --- /dev/null +++ b/board/seco/common/mx6.h @@ -0,0 +1,9 @@ +#ifndef __SECO_COMMON_MX6_H +#define __SECO_COMMON_MX6_H + +void seco_mx6_setup_uart_iomux(void); +void seco_mx6_setup_enet_iomux(void); +int seco_mx6_rgmii_rework(struct phy_device *phydev); +void seco_mx6_setup_usdhc_iomux(int id); + +#endif /* __SECO_COMMON_MX6_H */ diff --git a/board/seco/mx6quq7/MAINTAINERS b/board/seco/mx6quq7/MAINTAINERS new file mode 100644 index 0000000000..60fd4caab8 --- /dev/null +++ b/board/seco/mx6quq7/MAINTAINERS @@ -0,0 +1,6 @@ +MX6QUQ7 BOARD +M: Boris Brezillon <boris.brezillon@free-electrons.com> +S: Maintained +F: board/seco/mx6quq7/ +F: include/configs/secomx6quq7.h +F: configs/secomx6quq7_defconfig diff --git a/board/seco/mx6quq7/Makefile b/board/seco/mx6quq7/Makefile new file mode 100644 index 0000000000..bbf1d68190 --- /dev/null +++ b/board/seco/mx6quq7/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2015 ECA Sinters +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mx6quq7.o diff --git a/board/seco/mx6quq7/mx6quq7-2g.cfg b/board/seco/mx6quq7/mx6quq7-2g.cfg new file mode 100644 index 0000000000..159120edd6 --- /dev/null +++ b/board/seco/mx6quq7/mx6quq7-2g.cfg @@ -0,0 +1,173 @@ +/* + * Copyright (C) 2013 Seco USA Inc + * + * SPDX-License-Identifier: GPL-2.0 + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +/* DDR IO TYPE */ +DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 +DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 + +/* DATA STROBE */ +DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 +DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028 + +/* DATA */ +DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 +DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B4DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B5DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B6DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B7DS, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028 +/* ADDRESS */ +DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028 +DATA 4, MX6_IOM_DRAM_CAS, 0x00000028 +DATA 4, MX6_IOM_DRAM_RAS, 0x00000028 + +/* CONTROL */ +DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 +DATA 4, MX6_IOM_DRAM_RESET, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028 + +/* CLOCK */ +DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 + +/* + * DDR3 SETTINGS + * Read Data Bit Delay + */ +DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 + + +/* Write Leveling */ +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F0001 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F + +/* DQS gating, read delay, write delay calibration values */ +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x431A0326 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x0323031B +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x433F0340 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x0345031C + +/* Read calibration */ +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40343137 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x40372F45 + +/* write calibration */ +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x32414741 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4731473C + +/* Complete calibration by forced measurement: */ +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 + +/* + * MMDC init: + * in DDR3, 64-bit mode, only MMDC0 is init + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 +DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 + +DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E7955 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF328F64 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB + +DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023 + +/* CS0_END = 2304MB in step da 256Mb -> [(2304*8/256) - 1] */ +DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 + +/* SDE_1=0; ROW=3; BL=1; DSIZ=2 -> 64 bit */ +DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000 + +/* Initialize DDR3 on CS_0 and CS_1 */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x02088032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 + +/* P0 01c */ +/* write 0x0940 to MR0 bank_0 (Burst Type=1 (Interlived)) */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030 + +/*ZQ - Calibrationi */ +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 + +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 + +DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 + +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 + +/* set the default clock gate to save power */ +DATA 4, CCM_CCGR0, 0x00C03F3F +DATA 4, CCM_CCGR1, 0x0030FC03 +DATA 4, CCM_CCGR2, 0x0FFFC000 +DATA 4, CCM_CCGR3, 0x3FF00000 +DATA 4, CCM_CCGR4, 0x00FFF300 +DATA 4, CCM_CCGR5, 0x0F0000C3 +DATA 4, CCM_CCGR6, 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4, MX6_IOMUXC_GPR4, 0xF00000FF + +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4, MX6_IOMUXC_GPR6, 0x007F007F +DATA 4, MX6_IOMUXC_GPR7, 0x007F007F + diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c new file mode 100644 index 0000000000..ea1d4b8e49 --- /dev/null +++ b/board/seco/mx6quq7/mx6quq7.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * Copyright (C) 2015 ECA Sinters + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * Modified by: Boris Brezillon <boris.brezillon@free-electrons.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6-pins.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/boot_mode.h> +#include <malloc.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/arch/mxc_hdmi.h> +#include <asm/arch/crm_regs.h> +#include <linux/fb.h> +#include <ipu_pixfmt.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <micrel.h> +#include <asm/imx-common/mxc_i2c.h> +#include <i2c.h> + +#include "../common/mx6.h" + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +int board_early_init_f(void) +{ + seco_mx6_setup_uart_iomux(); + + return 0; +} + +int board_phy_config(struct phy_device *phydev) +{ + seco_mx6_rgmii_rework(phydev); + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + uint32_t base = IMX_FEC_BASE; + struct mii_dev *bus = NULL; + struct phy_device *phydev = NULL; + int ret = 0; + + seco_mx6_setup_enet_iomux(); + +#ifdef CONFIG_FEC_MXC + bus = fec_get_miibus(base, -1); + if (!bus) + return -ENOMEM; + + /* scan phy 4,5,6,7 */ + phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + free(bus); + return -ENOMEM; + } + + printf("using phy at %d\n", phydev->addr); + ret = fec_probe(bis, -1, base, bus, phydev); + if (ret) { + free(phydev); + free(bus); + printf("FEC MXC: %s:failed\n", __func__); + } +#endif + + return ret; +} + +static struct fsl_esdhc_cfg usdhc_cfg[2] = { + {USDHC3_BASE_ADDR}, + {USDHC2_BASE_ADDR}, +}; + +int board_mmc_init(bd_t *bis) +{ + u32 index = 0; + int ret; + + /* + * Following map is done: + * (U-boot device node) (Physical Port) + * mmc0 eMMC on Board + * mmc1 Ext SD + */ + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { + switch (index) { + case 0: + seco_mx6_setup_usdhc_iomux(3); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 4; + break; + case 1: + seco_mx6_setup_usdhc_iomux(4); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + usdhc_cfg[1].max_bus_width = 4; + break; + + default: + printf("Warning: %d exceed maximum number of SD ports %d\n", + index + 1, CONFIG_SYS_FSL_USDHC_NUM); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + if (ret) + return ret; + } + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + imx_iomux_v3_setup_pad(MX6_PAD_NANDF_D4__GPIO2_IO04 | + MUX_PAD_CTRL(NO_PAD_CTRL)); + + gpio_direction_output(IMX_GPIO_NR(2, 4), 0); + + /* Set Low */ + gpio_set_value(IMX_GPIO_NR(2, 4), 0); + udelay(1000); + + /* Set High */ + gpio_set_value(IMX_GPIO_NR(2, 4), 1); + + return 0; +} + +int checkboard(void) +{ + puts("Board: SECO uQ7\n"); + + return 0; +} diff --git a/board/socrates/nand.c b/board/socrates/nand.c index 73944780bf..15e6ea6944 100644 --- a/board/socrates/nand.c +++ b/board/socrates/nand.c @@ -18,9 +18,6 @@ static void sc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len); static u_char sc_nand_read_byte(struct mtd_info *mtd); static u16 sc_nand_read_word(struct mtd_info *mtd); static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len); -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len); -#endif static int sc_nand_device_ready(struct mtd_info *mtdinfo); #define FPGA_NAND_CMD_MASK (0x7 << 28) @@ -102,25 +99,6 @@ static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) } } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/** - * sc_nand_verify_buf - Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - */ -static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - int i; - - for (i = 0; i < len; i++) { - if (buf[i] != sc_nand_read_byte(mtd)); - return -EFAULT; - } - return 0; -} -#endif - /** * sc_nand_device_ready - Check the NAND device is ready for next command. * @mtd: MTD device structure @@ -178,9 +156,6 @@ int board_nand_init(struct nand_chip *nand) nand->read_word = sc_nand_read_word; nand->write_buf = sc_nand_write_buf; nand->read_buf = sc_nand_read_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - nand->verify_buf = sc_nand_verify_buf; -#endif return 0; } diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 7f962dcb25..17fa7ea6bd 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -419,10 +419,13 @@ static int raw_access(nand_info_t *nand, ulong addr, loff_t off, ulong count, .mode = MTD_OPS_RAW }; - if (read) + if (read) { ret = mtd_read_oob(nand, off, &ops); - else + } else { ret = mtd_write_oob(nand, off, &ops); + if (!ret) + ret = nand_verify_page_oob(nand, &ops, off); + } if (ret) { printf("%s: error at offset %llx, ret %d\n", @@ -690,7 +693,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) else ret = nand_write_skip_bad(nand, off, &rwsize, NULL, maxsize, - (u_char *)addr, 0); + (u_char *)addr, + WITH_WR_VERIFY); #ifdef CONFIG_CMD_NAND_TRIMFFS } else if (!strcmp(s, ".trimffs")) { if (read) { @@ -699,17 +703,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } ret = nand_write_skip_bad(nand, off, &rwsize, NULL, maxsize, (u_char *)addr, - WITH_DROP_FFS); -#endif -#ifdef CONFIG_CMD_NAND_YAFFS - } else if (!strcmp(s, ".yaffs")) { - if (read) { - printf("Unknown nand command suffix '%s'.\n", s); - return 1; - } - ret = nand_write_skip_bad(nand, off, &rwsize, NULL, - maxsize, (u_char *)addr, - WITH_YAFFS_OOB); + WITH_DROP_FFS | WITH_WR_VERIFY); #endif } else if (!strcmp(s, ".oob")) { /* out-of-band data */ @@ -853,11 +847,6 @@ static char nand_help_text[] = " 'addr', skipping bad blocks and dropping any pages at the end\n" " of eraseblocks that contain only 0xFF\n" #endif -#ifdef CONFIG_CMD_NAND_YAFFS - "nand write.yaffs - addr off|partition size\n" - " write 'size' bytes starting at offset 'off' with yaffs format\n" - " from memory address 'addr', skipping bad blocks.\n" -#endif "nand erase[.spread] [clean] off size - erase 'size' bytes " "from offset 'off'\n" " With '.spread', erase enough for given file size, otherwise,\n" diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig index 6adfd55708..cde0d705a5 100644 --- a/configs/mx6dlsabresd_defconfig +++ b/configs/mx6dlsabresd_defconfig @@ -1,5 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL" CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index fb8c4decfd..c6b3108d75 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL" CONFIG_ARM=y CONFIG_TARGET_MX6SLEVK=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig index 93efe73014..454cb400b5 100644 --- a/configs/mx6slevk_spinor_defconfig +++ b/configs/mx6slevk_spinor_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR" CONFIG_ARM=y CONFIG_TARGET_MX6SLEVK=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/secomx6quq7_defconfig b/configs/secomx6quq7_defconfig new file mode 100644 index 0000000000..dcd681dfb7 --- /dev/null +++ b/configs/secomx6quq7_defconfig @@ -0,0 +1,7 @@ +CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC" +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_TARGET_SECOMX6=y +CONFIG_SECOMX6_UQ7=y +CONFIG_SECOMX6Q=y +CONFIG_SECOMX6_2GB=y diff --git a/doc/README.nand b/doc/README.nand index dee0e00a61..46d7edd179 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -99,12 +99,6 @@ Configuration Options: CONFIG_CMD_NAND_TORTURE Enables the torture command (see description of this command below). - CONFIG_MTD_NAND_ECC_JFFS2 - Define this if you want the Error Correction Code information in - the out-of-band data to be formatted to match the JFFS2 file system. - CONFIG_MTD_NAND_ECC_YAFFS would be another useful choice for - someone to implement. - CONFIG_SYS_MAX_NAND_DEVICE The maximum number of NAND devices you want to support. @@ -312,12 +306,6 @@ Platform specific options NOTE: ===== -The current NAND implementation is based on what is in recent -Linux kernels. The old legacy implementation has been removed. - -If you have board code which used CONFIG_NAND_LEGACY, you'll need -to convert to the current NAND interface for it to continue to work. - The Disk On Chip driver is currently broken and has been for some time. There is a driver in drivers/mtd/nand, taken from Linux, that works with the current NAND system but has not yet been adapted to the u-boot diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c index f9ee18999a..a9754922e8 100644 --- a/drivers/dfu/dfu_nand.c +++ b/drivers/dfu/dfu_nand.c @@ -64,7 +64,7 @@ static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu, return ret; /* then write */ ret = nand_write_skip_bad(nand, start, &count, &actual, - lim, buf, 0); + lim, buf, WITH_WR_VERIFY); } if (ret != 0) { diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 41689b5165..a3970745c9 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -405,18 +405,6 @@ static int nand_davinci_write_page(struct mtd_info *mtd, struct nand_chip *chip, goto err; } -#ifdef CONFIG_MTD_NAND_VERIFY_WRITE - /* Send command to read back the data */ - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - - if (chip->verify_buf(mtd, buf, mtd->writesize)) { - ret = -EIO; - goto err; - } - - /* Make sure the next page prog is preceded by a status read */ - chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); -#endif err: /* restore ECC layout */ if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) { diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 3372b64212..e85832d319 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -561,41 +561,6 @@ static void fsl_elbc_read_buf(struct mtd_info *mtd, u8 *buf, int len) len, avail); } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/* - * Verify buffer against the FCM Controller Data Buffer - */ -static int fsl_elbc_verify_buf(struct mtd_info *mtd, - const u_char *buf, int len) -{ - struct nand_chip *chip = mtd->priv; - struct fsl_elbc_mtd *priv = chip->priv; - struct fsl_elbc_ctrl *ctrl = priv->ctrl; - int i; - - if (len < 0) { - printf("write_buf of %d bytes", len); - return -EINVAL; - } - - if ((unsigned int)len > ctrl->read_bytes - ctrl->index) { - printf("verify_buf beyond end of buffer " - "(%d requested, %u available)\n", - len, ctrl->read_bytes - ctrl->index); - - ctrl->index = ctrl->read_bytes; - return -EINVAL; - } - - for (i = 0; i < len; i++) - if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i]) - break; - - ctrl->index += len; - return i == len && ctrl->status == LTESR_CC ? 0 : -EIO; -} -#endif - /* This function is called after Program and Erase Operations to * check for success or failure. */ @@ -727,9 +692,6 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr) nand->read_byte = fsl_elbc_read_byte; nand->write_buf = fsl_elbc_write_buf; nand->read_buf = fsl_elbc_read_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - nand->verify_buf = fsl_elbc_verify_buf; -#endif nand->select_chip = fsl_elbc_select_chip; nand->cmdfunc = fsl_elbc_cmdfunc; nand->waitfunc = fsl_elbc_wait; diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index b283eaea34..7903eebd53 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -683,41 +683,6 @@ static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len) __func__, len, avail); } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/* - * Verify buffer against the IFC Controller Data Buffer - */ -static int fsl_ifc_verify_buf(struct mtd_info *mtd, - const u_char *buf, int len) -{ - struct nand_chip *chip = mtd->priv; - struct fsl_ifc_mtd *priv = chip->priv; - struct fsl_ifc_ctrl *ctrl = priv->ctrl; - int i; - - if (len < 0) { - printf("%s of %d bytes", __func__, len); - return -EINVAL; - } - - if ((unsigned int)len > ctrl->read_bytes - ctrl->index) { - printf("%s beyond end of buffer " - "(%d requested, %u available)\n", - __func__, len, ctrl->read_bytes - ctrl->index); - - ctrl->index = ctrl->read_bytes; - return -EINVAL; - } - - for (i = 0; i < len; i++) - if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i]) - break; - - ctrl->index += len; - return i == len && ctrl->status == IFC_NAND_EVTER_STAT_OPC ? 0 : -EIO; -} -#endif - /* This function is called after Program and Erase Operations to * check for success or failure. */ @@ -940,9 +905,6 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr) nand->write_buf = fsl_ifc_write_buf; nand->read_buf = fsl_ifc_read_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - nand->verify_buf = fsl_ifc_verify_buf; -#endif nand->select_chip = fsl_ifc_select_chip; nand->cmdfunc = fsl_ifc_cmdfunc; nand->waitfunc = fsl_ifc_wait; diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index 65ce98ad5e..5426c32114 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -153,21 +153,6 @@ static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) buf[i] = in_8(chip->IO_ADDR_R); } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -static int upm_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - - for (i = 0; i < len; i++) { - if (buf[i] != in_8(chip->IO_ADDR_R)) - return -EFAULT; - } - - return 0; -} -#endif - static int nand_dev_ready(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; @@ -193,9 +178,6 @@ int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun) chip->read_byte = upm_nand_read_byte; chip->read_buf = upm_nand_read_buf; chip->write_buf = upm_nand_write_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - chip->verify_buf = upm_nand_verify_buf; -#endif if (fun->dev_ready) chip->dev_ready = nand_dev_ready; diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index 7233bfc127..e621c3665e 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -459,29 +459,6 @@ static void mpc5121_nfc_write_buf(struct mtd_info *mtd, mpc5121_nfc_buf_copy(mtd, (u_char *) buf, len, 1); } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/* Compare buffer with NAND flash */ -static int mpc5121_nfc_verify_buf(struct mtd_info *mtd, - const u_char * buf, int len) -{ - u_char tmp[256]; - uint bsize; - - while (len) { - bsize = min(len, 256); - mpc5121_nfc_read_buf(mtd, tmp, bsize); - - if (memcmp(buf, tmp, bsize)) - return 1; - - buf += bsize; - len -= bsize; - } - - return 0; -} -#endif - /* Read byte from NFC buffers */ static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd) { @@ -609,9 +586,6 @@ int board_nand_init(struct nand_chip *chip) chip->read_word = mpc5121_nfc_read_word; chip->read_buf = mpc5121_nfc_read_buf; chip->write_buf = mpc5121_nfc_write_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - chip->verify_buf = mpc5121_nfc_verify_buf; -#endif chip->select_chip = mpc5121_nfc_select_chip; chip->bbt_options = NAND_BBT_USE_FLASH; chip->ecc.mode = NAND_ECC_SOFT; diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 2e5b5b9bf9..f12b07e7ad 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -949,34 +949,6 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) host->col_addr = col; } -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/* - * Used by the upper layer to verify the data in NAND Flash - * with the data in the buf. - */ -static int mxc_nand_verify_buf(struct mtd_info *mtd, - const u_char *buf, int len) -{ - u_char tmp[256]; - uint bsize; - - while (len) { - bsize = min(len, 256); - mxc_nand_read_buf(mtd, tmp, bsize); - - if (memcmp(buf, tmp, bsize)) - return 1; - - buf += bsize; - len -= bsize; - } - - return 0; -} -#endif -#endif - /* * This function is used by upper layer for select and * deselect of the NAND chip @@ -1207,11 +1179,6 @@ int board_nand_init(struct nand_chip *this) this->read_word = mxc_nand_read_word; this->write_buf = mxc_nand_write_buf; this->read_buf = mxc_nand_read_buf; -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - this->verify_buf = mxc_nand_verify_buf; -#endif -#endif host->regs = (struct mxc_nand_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE; #ifdef MXC_NFC_V3_2 diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index 7a064ab1bf..2d2b938633 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -453,7 +453,7 @@ static void mxs_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int length) d->cmd.data = MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ | MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_DEC_SEM | - MXS_DMA_DESC_WAIT4END | (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET); + MXS_DMA_DESC_WAIT4END | (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET); d->cmd.address = 0; @@ -510,7 +510,7 @@ static void mxs_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, d->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END | - (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) | + (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) | (length << MXS_DMA_DESC_BYTES_OFFSET); d->cmd.address = (dma_addr_t)nand_info->data_buf; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 6db6566e73..c0e381ad2d 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -361,51 +361,6 @@ void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) ioread8_rep(chip->IO_ADDR_R, buf, len); } -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/** - * nand_verify_buf - [DEFAULT] Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - * - * Default verify function for 8bit buswidth. - */ -static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - - for (i = 0; i < len; i++) - if (buf[i] != readb(chip->IO_ADDR_R)) - return -EFAULT; - return 0; -} - -/** - * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - * - * Default verify function for 16bit buswidth. - */ -static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - u16 *p = (u16 *) buf; - len >>= 1; - - for (i = 0; i < len; i++) - if (p[i] != readw(chip->IO_ADDR_R)) - return -EFAULT; - - return 0; -} -#endif -#endif - /** * nand_write_buf16 - [DEFAULT] write buffer to chip * @mtd: MTD device structure @@ -2435,20 +2390,6 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, status = chip->waitfunc(mtd, chip); } - -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - /* Send command to read back the data */ - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - - if (chip->verify_buf(mtd, buf, mtd->writesize)) - return -EIO; - - /* Make sure the next page prog is preceded by a status read */ - chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); -#endif -#endif - return 0; } @@ -3139,12 +3080,6 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) chip->read_buf = busw ? nand_read_buf16 : nand_read_buf; if (!chip->scan_bbt) chip->scan_bbt = nand_default_bbt; -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - if (!chip->verify_buf) - chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf; -#endif -#endif if (!chip->controller) { chip->controller = &chip->hwcontrol; diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index afdd160d81..12dd26a33f 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -464,6 +464,87 @@ static size_t drop_ffs(const nand_info_t *nand, const u_char *buf, #endif /** + * nand_verify_page_oob: + * + * Verify a page of NAND flash, including the OOB. + * Reads page of NAND and verifies the contents and OOB against the + * values in ops. + * + * @param nand NAND device + * @param ops MTD operations, including data to verify + * @param ofs offset in flash + * @return 0 in case of success + */ +int nand_verify_page_oob(nand_info_t *nand, struct mtd_oob_ops *ops, loff_t ofs) +{ + int rval; + struct mtd_oob_ops vops; + size_t verlen = nand->writesize + nand->oobsize; + + memcpy(&vops, ops, sizeof(vops)); + + vops.datbuf = malloc(verlen); + + if (!vops.datbuf) + return -ENOMEM; + + vops.oobbuf = vops.datbuf + nand->writesize; + + rval = mtd_read_oob(nand, ofs, &vops); + if (!rval) + rval = memcmp(ops->datbuf, vops.datbuf, vops.len); + if (!rval) + rval = memcmp(ops->oobbuf, vops.oobbuf, vops.ooblen); + + free(vops.datbuf); + + return rval ? -EIO : 0; +} + +/** + * nand_verify: + * + * Verify a region of NAND flash. + * Reads NAND in page-sized chunks and verifies the contents against + * the contents of a buffer. The offset into the NAND must be + * page-aligned, and the function doesn't handle skipping bad blocks. + * + * @param nand NAND device + * @param ofs offset in flash + * @param len buffer length + * @param buf buffer to read from + * @return 0 in case of success + */ +int nand_verify(nand_info_t *nand, loff_t ofs, size_t len, u_char *buf) +{ + int rval = 0; + size_t verofs; + size_t verlen = nand->writesize; + uint8_t *verbuf = malloc(verlen); + + if (!verbuf) + return -ENOMEM; + + /* Read the NAND back in page-size groups to limit malloc size */ + for (verofs = ofs; verofs < ofs + len; + verofs += verlen, buf += verlen) { + verlen = min(nand->writesize, (uint32_t)(ofs + len - verofs)); + rval = nand_read(nand, verofs, &verlen, verbuf); + if (!rval || (rval == -EUCLEAN)) + rval = memcmp(buf, verbuf, verlen); + + if (rval) + break; + } + + free(verbuf); + + return rval ? -EIO : 0; +} + + + +/** * nand_write_skip_bad: * * Write image to NAND flash. @@ -499,24 +580,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, if (actual) *actual = 0; -#ifdef CONFIG_CMD_NAND_YAFFS - if (flags & WITH_YAFFS_OOB) { - if (flags & ~WITH_YAFFS_OOB) - return -EINVAL; - - int pages; - pages = nand->erasesize / nand->writesize; - blocksize = (pages * nand->oobsize) + nand->erasesize; - if (*length % (nand->writesize + nand->oobsize)) { - printf("Attempt to write incomplete page" - " in yaffs mode\n"); - return -EINVAL; - } - } else -#endif - { - blocksize = nand->erasesize; - } + blocksize = nand->erasesize; /* * nand_write() handles unaligned, partial page writes. @@ -554,6 +618,10 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, if (!need_skip && !(flags & WITH_DROP_FFS)) { rval = nand_write(nand, offset, length, buffer); + + if ((flags & WITH_WR_VERIFY) && !rval) + rval = nand_verify(nand, offset, *length, buffer); + if (rval == 0) return 0; @@ -581,48 +649,22 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, else write_size = blocksize - block_offset; -#ifdef CONFIG_CMD_NAND_YAFFS - if (flags & WITH_YAFFS_OOB) { - int page, pages; - size_t pagesize = nand->writesize; - size_t pagesize_oob = pagesize + nand->oobsize; - struct mtd_oob_ops ops; - - ops.len = pagesize; - ops.ooblen = nand->oobsize; - ops.mode = MTD_OPS_AUTO_OOB; - ops.ooboffs = 0; - - pages = write_size / pagesize_oob; - for (page = 0; page < pages; page++) { - WATCHDOG_RESET(); - - ops.datbuf = p_buffer; - ops.oobbuf = ops.datbuf + pagesize; - - rval = mtd_write_oob(nand, offset, &ops); - if (rval != 0) - break; - - offset += pagesize; - p_buffer += pagesize_oob; - } - } - else -#endif - { - truncated_write_size = write_size; + truncated_write_size = write_size; #ifdef CONFIG_CMD_NAND_TRIMFFS - if (flags & WITH_DROP_FFS) - truncated_write_size = drop_ffs(nand, p_buffer, - &write_size); + if (flags & WITH_DROP_FFS) + truncated_write_size = drop_ffs(nand, p_buffer, + &write_size); #endif - rval = nand_write(nand, offset, &truncated_write_size, - p_buffer); - offset += write_size; - p_buffer += write_size; - } + rval = nand_write(nand, offset, &truncated_write_size, + p_buffer); + + if ((flags & WITH_WR_VERIFY) && !rval) + rval = nand_verify(nand, offset, + truncated_write_size, p_buffer); + + offset += write_size; + p_buffer += write_size; if (rval != 0) { printf("NAND write to offset %llx failed %d\n", diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 265959502d..8a68cb0a67 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -118,21 +118,6 @@ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len out_be32((u32 *)(base + NDFC_DATA), *p++); } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) -{ - struct nand_chip *this = mtdinfo->priv; - ulong base = (ulong) this->IO_ADDR_W & 0xffffff00; - uint32_t *p = (uint32_t *) buf; - - for (; len > 0; len -= 4) - if (*p++ != in_be32((u32 *)(base + NDFC_DATA))) - return -1; - - return 0; -} -#endif - /* * Read a byte from the NDFC. */ @@ -207,9 +192,6 @@ int board_nand_init(struct nand_chip *nand) #endif nand->write_buf = ndfc_write_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - nand->verify_buf = ndfc_verify_buf; -#endif nand->read_byte = ndfc_read_byte; chip++; diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c index 928d58b3a7..d98dd28800 100644 --- a/drivers/mtd/nand/vf610_nfc.c +++ b/drivers/mtd/nand/vf610_nfc.c @@ -146,6 +146,7 @@ struct vf610_nfc { void __iomem *regs; uint column; int spareonly; + int page_sz; int page; /* Status and ID are in alternate locations. */ int alt_buf; @@ -329,6 +330,11 @@ static void vf610_nfc_addr_cycle(struct mtd_info *mtd, int column, int page) ROW_ADDR_SHIFT, page); } +static inline void vf610_nfc_transfer_size(void __iomem *regbase, int size) +{ + __raw_writel(size, regbase + NFC_SECTOR_SIZE); +} + /* Send command to NAND chip */ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, int column, int page) @@ -342,12 +348,14 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, switch (command) { case NAND_CMD_PAGEPROG: nfc->page = -1; + vf610_nfc_transfer_size(nfc->regs, nfc->page_sz); vf610_nfc_send_commands(nfc->regs, NAND_CMD_SEQIN, command, PROGRAM_PAGE_CMD_CODE); vf610_nfc_addr_cycle(mtd, column, page); break; case NAND_CMD_RESET: + vf610_nfc_transfer_size(nfc->regs, 0); vf610_nfc_send_command(nfc->regs, command, RESET_CMD_CODE); break; /* @@ -363,14 +371,15 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, if (nfc->page == page) return; nfc->page = page; + vf610_nfc_transfer_size(nfc->regs, nfc->page_sz); vf610_nfc_send_commands(nfc->regs, NAND_CMD_READ0, NAND_CMD_READSTART, READ_PAGE_CMD_CODE); vf610_nfc_addr_cycle(mtd, column, page); break; case NAND_CMD_ERASE1: - if (nfc->page == page) - nfc->page = -1; + nfc->page = -1; + vf610_nfc_transfer_size(nfc->regs, 0); vf610_nfc_send_commands(nfc->regs, command, NAND_CMD_ERASE2, ERASE_CMD_CODE); vf610_nfc_addr_cycle(mtd, column, page); @@ -378,11 +387,13 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, case NAND_CMD_READID: nfc->alt_buf = ALT_BUF_ID; + vf610_nfc_transfer_size(nfc->regs, 0); vf610_nfc_send_command(nfc->regs, command, READ_ID_CMD_CODE); break; case NAND_CMD_STATUS: nfc->alt_buf = ALT_BUF_STAT; + vf610_nfc_transfer_size(nfc->regs, 0); vf610_nfc_send_command(nfc->regs, command, STATUS_READ_CMD_CODE); break; @@ -580,7 +591,6 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) struct nand_chip *chip; struct vf610_nfc *nfc; int err = 0; - int page_sz; struct vf610_nfc_config cfg = { .hardware_ecc = 1, #ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT @@ -634,9 +644,8 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) chip->bbt_td = &bbt_main_descr; chip->bbt_md = &bbt_mirror_descr; - page_sz = PAGE_2K + OOB_64; - page_sz += cfg.width == 16 ? 1 : 0; - vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz); + nfc->page_sz = PAGE_2K + OOB_64; + nfc->page_sz += cfg.width == 16 ? 1 : 0; /* Set configuration register. */ vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT); @@ -665,16 +674,15 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) chip->ecc.mode = NAND_ECC_SOFT; /* default */ - page_sz = mtd->writesize + mtd->oobsize; + nfc->page_sz = mtd->writesize + mtd->oobsize; /* Single buffer only, max 256 OOB minus ECC status */ - if (page_sz > PAGE_2K + 256 - 8) { + if (nfc->page_sz > PAGE_2K + 256 - 8) { dev_err(nfc->dev, "Unsupported flash size\n"); err = -ENXIO; goto error; } - page_sz += cfg.width == 16 ? 1 : 0; - vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz); + nfc->page_sz += cfg.width == 16 ? 1 : 0; if (cfg.hardware_ecc) { if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) { diff --git a/drivers/spi/cf_qspi.c b/drivers/spi/cf_qspi.c index 6b8563366b..834c5bd259 100644 --- a/drivers/spi/cf_qspi.c +++ b/drivers/spi/cf_qspi.c @@ -20,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR; #define clamp(x, low, high) (min(max(low, x), high)) -#define to_cf_qspi_slave(s) container_of(s, struct cf_qspi_slave, s) +#define to_cf_qspi_slave(s) container_of(s, struct cf_qspi_slave, slave) struct cf_qspi_slave { struct spi_slave slave; /* Specific bus:cs ID for each device */ diff --git a/drivers/spi/cf_spi.c b/drivers/spi/cf_spi.c index 879a809cba..6ce11012e8 100644 --- a/drivers/spi/cf_spi.c +++ b/drivers/spi/cf_spi.c @@ -20,13 +20,6 @@ struct cf_spi_slave { int charbit; }; -int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, - void *din, ulong flags); -struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, uint mode); -void cfspi_init(void); -void cfspi_tx(u32 ctrl, u16 data); -u16 cfspi_rx(void); - extern void cfspi_port_conf(void); extern int cfspi_claim_bus(uint bus, uint cs); extern void cfspi_release_bus(uint bus, uint cs); @@ -46,7 +39,12 @@ DECLARE_GLOBAL_DATA_PTR; #define SPI_MODE_MOD 0x00200000 #define SPI_DBLRATE 0x00100000 -void cfspi_init(void) +static inline struct cf_spi_slave *to_cf_spi_slave(struct spi_slave *slave) +{ + return container_of(slave, struct cf_spi_slave, slave); +} + +static void cfspi_init(void) { volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; @@ -84,7 +82,7 @@ void cfspi_init(void) #endif } -void cfspi_tx(u32 ctrl, u16 data) +static void cfspi_tx(u32 ctrl, u16 data) { volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; @@ -93,7 +91,7 @@ void cfspi_tx(u32 ctrl, u16 data) dspi->tfr = (ctrl | data); } -u16 cfspi_rx(void) +static u16 cfspi_rx(void) { volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; @@ -102,10 +100,10 @@ u16 cfspi_rx(void) return (dspi->rfr & 0xFFFF); } -int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, - void *din, ulong flags) +static int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, + void *din, ulong flags) { - struct cf_spi_slave *cfslave = (struct cf_spi_slave *)slave; + struct cf_spi_slave *cfslave = to_cf_spi_slave(slave); u16 *spi_rd16 = NULL, *spi_wr16 = NULL; u8 *spi_rd = NULL, *spi_wr = NULL; static u32 ctrl = 0; @@ -176,7 +174,8 @@ int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, return 0; } -struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, uint mode) +static struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, + uint mode) { /* * bit definition for mode: @@ -326,7 +325,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, void spi_free_slave(struct spi_slave *slave) { - free(slave); + struct cf_spi_slave *cfslave = to_cf_spi_slave(slave); + + free(cfslave); } int spi_claim_bus(struct spi_slave *slave) diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 0ec5b9d859..bf18362baa 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -32,9 +32,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!ds) return NULL; - ds->slave.bus = bus; - ds->slave.cs = cs; - switch (bus) { case SPI0_BUS: ds->regs = (struct davinci_spi_regs *)SPI0_BASE; diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c index 2624844d52..8f5c0fc802 100644 --- a/drivers/spi/designware_spi.c +++ b/drivers/spi/designware_spi.c @@ -164,13 +164,13 @@ static void spi_hw_init(struct dw_spi_priv *priv) if (!priv->fifo_len) { u32 fifo; - for (fifo = 2; fifo <= 256; fifo++) { + for (fifo = 1; fifo < 256; fifo++) { dw_writew(priv, DW_SPI_TXFLTR, fifo); if (fifo != dw_readw(priv, DW_SPI_TXFLTR)) break; } - priv->fifo_len = (fifo == 2) ? 0 : fifo - 1; + priv->fifo_len = (fifo == 1) ? 0 : fifo; dw_writew(priv, DW_SPI_TXFLTR, 0); } debug("%s: fifo_len=%d\n", __func__, priv->fifo_len); diff --git a/drivers/spi/ftssp010_spi.c b/drivers/spi/ftssp010_spi.c index 267e4d83bd..c7d6480478 100644 --- a/drivers/spi/ftssp010_spi.c +++ b/drivers/spi/ftssp010_spi.c @@ -431,7 +431,9 @@ free_out: void spi_free_slave(struct spi_slave *slave) { - free(slave); + struct ftssp010_spi *chip = to_ftssp010_spi(slave); + + free(chip); } int spi_claim_bus(struct spi_slave *slave) diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c index 857b60455a..3356c0f072 100644 --- a/drivers/spi/ti_qspi.c +++ b/drivers/spi/ti_qspi.c @@ -109,10 +109,17 @@ static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave) slave->op_mode_rx = 8; #endif +#ifdef CONFIG_QSPI_QUAD_SUPPORT + memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES | + QSPI_SETUP0_NUM_D_BYTES_8_BITS | + QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE | + QSPI_NUM_DUMMY_BITS); +#else memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES | QSPI_SETUP0_NUM_D_BYTES_NO_BITS | QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS; +#endif writel(memval, &qslave->base->setup0); } diff --git a/drivers/watchdog/imx_watchdog.c b/drivers/watchdog/imx_watchdog.c index d5993b4d26..1d18d4b269 100644 --- a/drivers/watchdog/imx_watchdog.c +++ b/drivers/watchdog/imx_watchdog.c @@ -20,7 +20,6 @@ struct watchdog_regs { #define WCR_WDE 0x04 /* WDOG enable */ #define WCR_WDT 0x08 #define WCR_SRS 0x10 -#define WCR_WDW 0x80 #define SET_WCR_WT(x) (x << 8) #ifdef CONFIG_IMX_WATCHDOG @@ -47,7 +46,7 @@ void hw_watchdog_init(void) #endif timeout = (CONFIG_WATCHDOG_TIMEOUT_MSECS / 500) - 1; writew(WCR_WDZST | WCR_WDBG | WCR_WDE | WCR_WDT | WCR_SRS | - WCR_WDW | SET_WCR_WT(timeout), &wdog->wcr); + SET_WCR_WT(timeout), &wdog->wcr); hw_watchdog_reset(); } #endif diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 838a0b18c3..dca1ca5abd 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -391,7 +391,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 6aaaaa43f0..047ed8b1bb 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -198,7 +198,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 59a8d1b5d1..ceee0e4d49 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -320,7 +320,6 @@ combinations. this should be removed later /* NAND */ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index e24b923368..7c45c3617a 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -234,7 +234,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (1024 * 1024) diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index be1750f627..3a6e9811d5 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -53,7 +53,6 @@ #define CONFIG_CMD_MISC #define CONFIG_CMD_MII #undef CONFIG_CMD_NAND -#undef CONFIG_CMD_NAND_YAFFS #define CONFIG_CMD_NET #define CONFIG_CMD_NFS #define CONFIG_CMD_PING diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index d9a19c3694..9cea76ae9b 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -272,7 +272,6 @@ "mtdparts=e2800000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)" #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 1384f360bd..fbf38c88d9 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -245,7 +245,6 @@ "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)" #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 85f5c40ede..521904daad 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -283,7 +283,6 @@ * NAND Flash on the Local Bus */ #define CONFIG_CMD_NAND 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_NAND_FSL_ELBC 1 diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 27221648e4..dc09b1f870 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -308,7 +308,6 @@ CONFIG_SYS_NAND_BASE + 0x80000, \ CONFIG_SYS_NAND_BASE + 0xC0000} #define CONFIG_SYS_MAX_NAND_DEVICE 4 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 4da247c51a..e624c717ff 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -194,7 +194,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 0b07876e78..5e7bc49dcf 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -303,7 +303,6 @@ CONFIG_SYS_NAND_BASE + 0x80000,\ CONFIG_SYS_NAND_BASE + 0xC0000} #define CONFIG_SYS_MAX_NAND_DEVICE 4 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index cd6a39c657..ccf3ce3bac 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -444,7 +444,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #if defined(CONFIG_P1010RDB_PA) diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 437111070d..795e3b5e18 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -290,7 +290,6 @@ #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index a8b7817a8e..d65c461fda 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -136,7 +136,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_NAND_FSL_ELBC #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index d8d30bb280..f99da6562a 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -251,7 +251,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 3f02cede32..2927043df4 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -398,7 +398,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index bd40d6ac93..84e8336a72 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -379,7 +379,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 92f5f56718..faf8c9dc7e 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -308,7 +308,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 52633181ad..6cc95ef2d1 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -341,7 +341,6 @@ #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index ff6d2c1d37..046aa48baa 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -357,7 +357,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index db6b42ea0f..faaf22c9bf 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -328,7 +328,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index dd7d52f293..cfe6557caa 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -281,7 +281,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index b644a6ce8b..c1ad35a018 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -467,7 +467,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 94078f5481..6aee6db3f3 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -62,7 +62,6 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_BSP #define CONFIG_CMD_NAND -#define CONFIG_CMD_NAND_YAFFS #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 225ffdd0a5..8e27ae4b72 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -248,7 +248,6 @@ #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index dee2b11056..8fe0e6c16a 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -77,6 +77,7 @@ #define CONFIG_TI_SPI_MMAP #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 +#define CONFIG_QSPI_QUAD_SUPPORT /* * Default to using SPI for environment, etc. diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index ce61a1621c..b79000e706 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -153,7 +153,6 @@ /* JFFS2 */ #ifdef CONFIG_CMD_JFFS2 -#define CONFIG_MTD_NAND_ECC_JFFS2 #define CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_NAND #endif diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 2384864eb0..c1ca56c692 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -214,7 +214,6 @@ #define CONFIG_SYS_NAND_BASE 0xE1000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_NAND_FSL_ELBC #define CONFIG_SYS_NAND_PAGE_SIZE (2048) #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 949b3dadb3..b70b5b19f5 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -167,7 +167,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 3dc4da391b..5de416d117 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -251,7 +251,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index f80efedeb2..e0435cc0a7 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -191,7 +191,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 21c654b6b1..dad49f96df 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -249,4 +249,11 @@ #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/ #endif +#define CONFIG_IMX6_THERMAL + +#define CONFIG_CMD_FUSE +#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) +#define CONFIG_MXC_OCOTP +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 5f27c2a41a..a5f97176ce 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -494,7 +494,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #if defined(CONFIG_P1020RDB_PD) #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/secomx6quq7.h b/include/configs/secomx6quq7.h new file mode 100644 index 0000000000..46ffb7a31c --- /dev/null +++ b/include/configs/secomx6quq7.h @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2013 Seco S.r.l + * + * Configuration settings for the Seco Boards. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "mx6_common.h" +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> +#include <linux/sizes.h> + +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_BOARD_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART2_BASE + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_SETEXPR + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +/* MMC Configuration */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* Ethernet Configuration */ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 6 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "uboot=u-boot.bin\0" \ + "kernel=uImage\0" \ + "nfsroot=/opt/eldk/arm\0" \ + "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \ + "ip_server=10.0.0.1\0" \ + "nfs_path=/targetfs \0" \ + "memory=mem=1024M\0" \ + "bootdev=mmc dev 0; ext2load mmc 0:1\0" \ + "root=root=/dev/mmcblk0p1\0" \ + "option=rootwait rw fixrtc rootflags=barrier=1\0" \ + "cpu_freq=arm_freq=996\0" \ + "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \ + " ${option} ${memory} ${cpu_freq}\0" \ + "setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \ + " root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \ + " nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \ + " ${memory} ${cpu_freq}\0" \ + "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \ + "bootcmd=run setbootargs; run setbootdev; run boot_dev;" \ + " bootm 0x10800000\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "SECO MX6Q uQ7 U-Boot > " + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING + + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE (8 * 1024) + +#if defined(CONFIG_ENV_IS_IN_MMC) + #define CONFIG_ENV_OFFSET (6 * 128 * 1024) + #define CONFIG_SYS_MMC_ENV_DEV 0 + #define CONFIG_DYNAMIC_MMC_DEVNO +#endif + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index bce94b3fdc..107f01a07e 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -186,7 +186,6 @@ */ #define CONFIG_SYS_NAND_BASE 0x61000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index d6b6143500..988a2e8bfe 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -131,7 +131,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2} #define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ #define CONFIG_NAND_FSL_ELBC diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 4536b94e91..ac3f4f1c84 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -122,7 +122,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2} #define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ #define CONFIG_NAND_FSL_ELBC diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 8438490fe4..bc927ecc59 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -678,11 +678,6 @@ struct nand_chip { void (*write_byte)(struct mtd_info *mtd, uint8_t byte); void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); -#endif -#endif void (*select_chip)(struct mtd_info *mtd, int chip); int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); diff --git a/include/nand.h b/include/nand.h index 15e31ab538..d2a53ab856 100644 --- a/include/nand.h +++ b/include/nand.h @@ -82,34 +82,8 @@ static inline int nand_erase(nand_info_t *info, loff_t off, size_t size) * declarations from nand_util.c ****************************************************************************/ -struct nand_write_options { - u_char *buffer; /* memory block containing image to write */ - ulong length; /* number of bytes to write */ - ulong offset; /* start address in NAND */ - int quiet; /* don't display progress messages */ - int autoplace; /* if true use auto oob layout */ - int forcejffs2; /* force jffs2 oob layout */ - int forceyaffs; /* force yaffs oob layout */ - int noecc; /* write without ecc */ - int writeoob; /* image contains oob data */ - int pad; /* pad to page size */ - int blockalign; /* 1|2|4 set multiple of eraseblocks - * to align to */ -}; - -typedef struct nand_write_options nand_write_options_t; typedef struct mtd_oob_ops mtd_oob_ops_t; -struct nand_read_options { - u_char *buffer; /* memory block in which read image is written*/ - ulong length; /* number of bytes to read */ - ulong offset; /* start address in NAND */ - int quiet; /* don't display progress messages */ - int readoob; /* put oob data in image */ -}; - -typedef struct nand_read_options nand_read_options_t; - struct nand_erase_options { loff_t length; /* number of bytes to erase */ loff_t offset; /* first address in NAND to erase */ @@ -130,15 +104,16 @@ typedef struct nand_erase_options nand_erase_options_t; int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, size_t *actual, loff_t lim, u_char *buffer); -#define WITH_YAFFS_OOB (1 << 0) /* whether write with yaffs format. This flag - * is a 'mode' meaning it cannot be mixed with - * other flags */ -#define WITH_DROP_FFS (1 << 1) /* drop trailing all-0xff pages */ +#define WITH_DROP_FFS (1 << 0) /* drop trailing all-0xff pages */ +#define WITH_WR_VERIFY (1 << 1) /* verify data was written correctly */ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, size_t *actual, loff_t lim, u_char *buffer, int flags); int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts); int nand_torture(nand_info_t *nand, loff_t offset); +int nand_verify_page_oob(nand_info_t *nand, struct mtd_oob_ops *ops, + loff_t ofs); +int nand_verify(nand_info_t *nand, loff_t ofs, size_t len, u_char *buf); #define NAND_LOCK_STATUS_TIGHT 0x01 #define NAND_LOCK_STATUS_UNLOCK 0x04 |