Merge branch 'master' of git://git.denx.de/u-boot-sh

- More board removal

6 files changed, 0 insertions, 542 deletions

diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
deleted file mode 100644
index 901ce4da61..0000000000
--- a/include/configs/ap325rxa.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Renesas Solutions AP-325RXA board
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-
-#ifndef __AP325RXA_H
-#define __AP325RXA_H
-
-#define CONFIG_CPU_SH7723	1
-
-#define CONFIG_DISPLAY_BOARDINFO
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-/* MEMORY */
-#define AP325RXA_SDRAM_BASE		(0x88000000)
-#define AP325RXA_FLASH_BASE_1		(0xA0000000)
-#define AP325RXA_FLASH_BANK_SIZE	(128 * 1024 * 1024)
-
-/* undef to save memory	*/
-/* Monitor Command Prompt */
-/* Buffer size for Console output */
-#define CONFIG_SYS_PBSIZE		256
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 38400 }
-
-/* SCIF */
-#define CONFIG_SCIF_A		1 /* SH7723 has SCIF and SCIFA */
-#define CONFIG_CONS_SCIF5	1
-
-/* Suppress display of console information at boot */
-
-#define CONFIG_SYS_MEMTEST_START	(AP325RXA_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-
-/* Enable alternate, more extensive, memory test */
-/* Scratch address used by the alternate memory test */
-#undef  CONFIG_SYS_MEMTEST_SCRATCH
-
-/* Enable temporary baudrate change while serial download */
-#undef  CONFIG_SYS_LOADS_BAUD_CHANGE
-
-#define CONFIG_SYS_SDRAM_BASE	(AP325RXA_SDRAM_BASE)
-/* maybe more, but if so u-boot doesn't know about it... */
-#define CONFIG_SYS_SDRAM_SIZE	(128 * 1024 * 1024)
-/* default load address for scripts ?!? */
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
-
-/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
-#define CONFIG_SYS_MONITOR_BASE	(AP325RXA_FLASH_BASE_1)
-/* Monitor size */
-#define CONFIG_SYS_MONITOR_LEN	(128 * 1024)
-/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
-
-/* FLASH */
-#undef  CONFIG_SYS_FLASH_QUIET_TEST
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-/* Physical start address of Flash memory */
-#define CONFIG_SYS_FLASH_BASE	(AP325RXA_FLASH_BASE_1)
-/* Max number of sectors on each Flash chip */
-#define CONFIG_SYS_MAX_FLASH_SECT	512
-
-/*
- * IDE support
- */
-#define CONFIG_IDE_RESET	1
-#define CONFIG_SYS_PIO_MODE		1
-#define CONFIG_SYS_IDE_MAXBUS		1	/* IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE	1
-#define CONFIG_SYS_ATA_BASE_ADDR	0xB4180000
-#define CONFIG_SYS_ATA_STRIDE		2	/* 1bit shift */
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x200	/* data reg offset */
-#define CONFIG_SYS_ATA_REG_OFFSET	0x200	/* reg offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x210	/* alternate register offset */
-#define CONFIG_IDE_SWAP_IO
-
-/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}
-
-/* Timeout for Flash erase operations (in ms) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
-/* Timeout for Flash write operations (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
-/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
-/* Timeout for Flash clear lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
-
-/*
- * Use hardware flash sectors protection instead
- * of U-Boot software protection
- */
-#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/* ENV setting */
-#define CONFIG_ENV_OVERWRITE	1
-#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
-#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
-#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
-
-/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ	33333333
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
-#endif	/* __AP325RXA_H */
diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h
deleted file mode 100644
index edcc0cbc8a..0000000000
--- a/include/configs/ap_sh4a_4a.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Alpha Project AP-SH4A-4A board
- *
- * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- */
-
-#ifndef __AP_SH4A_4A_H
-#define __AP_SH4A_4A_H
-
-#define CONFIG_CPU_SH7734	1
-#define CONFIG_400MHZ_MODE	1
-
-#define CONFIG_DISPLAY_BOARDINFO
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-/* Ether */
-#define CONFIG_SH_ETHER_USE_PORT (0)
-#define CONFIG_SH_ETHER_PHY_ADDR (0x0)
-#define CONFIG_SH_ETHER_PHY_MODE (PHY_INTERFACE_MODE_GMII)
-#define CONFIG_SH_ETHER_SH7734_MII (0x02) /* GMII */
-#define CONFIG_BITBANGMII
-#define CONFIG_BITBANGMII_MULTI
-
-/* undef to save memory	*/
-/* Monitor Command Prompt */
-/* Buffer size for Console output */
-#define CONFIG_SYS_PBSIZE		256
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
-
-/* SCIF */
-#define CONFIG_SCIF			1
-#define CONFIG_CONS_SCIF4	1
-
-/* Suppress display of console information at boot */
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE	(0x88000000)
-#define CONFIG_SYS_SDRAM_SIZE	(64 * 1024 * 1024)
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
-
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END	 (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE)
-/* Enable alternate, more extensive, memory test */
-/* Scratch address used by the alternate memory test */
-#undef  CONFIG_SYS_MEMTEST_SCRATCH
-
-/* Enable temporary baudrate change while serial download */
-#undef  CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/* FLASH */
-#undef  CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_BASE	(0xA0000000)
-#define CONFIG_SYS_MAX_FLASH_SECT	512
-
-/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-
-/* Timeout for Flash erase operations (in ms) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
-/* Timeout for Flash write operations (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
-/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
-/* Timeout for Flash clear lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
-
-/*
- * Use hardware flash sectors protection instead
- * of U-Boot software protection
- */
-#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
-/* Monitor size */
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
-/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
-
-/* ENV setting */
-#define CONFIG_ENV_OVERWRITE	1
-#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
-#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
-#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
-
-/* Board Clock */
-#if defined(CONFIG_400MHZ_MODE)
-#define CONFIG_SYS_CLK_FREQ 50000000
-#else
-#define CONFIG_SYS_CLK_FREQ 44444444
-#endif
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
-#endif	/* __AP_SH4A_4A_H */
diff --git a/include/configs/espt.h b/include/configs/espt.h
deleted file mode 100644
index 0339de4081..0000000000
--- a/include/configs/espt.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the ESPT-GIGA board
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-
-#ifndef __ESPT_H
-#define __ESPT_H
-
-#define CONFIG_CPU_SH7763	1
-#define __LITTLE_ENDIAN		1
-
-#define CONFIG_ENV_OVERWRITE    1
-
-#define CONFIG_DISPLAY_BOARDINFO
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-/* SCIF */
-#define CONFIG_CONS_SCIF0		1
-
-#define CONFIG_SYS_PBSIZE		256	/* Buffer size for Console output */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate
-												settings for this board */
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
-#define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
-#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-
-/* Flash(NOR) S29JL064H */
-#define CONFIG_SYS_FLASH_BASE		(0xA0000000)
-#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT)
-#define CONFIG_SYS_MAX_FLASH_BANKS (1)
-#define CONFIG_SYS_MAX_FLASH_SECT  (150)
-
-/* U-Boot setting */
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
-/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
-
-#undef  CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
-/* Timeout for Flash erase operations (in ms) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
-/* Timeout for Flash write operations (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
-/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT		(3 * 1000)
-/* Timeout for Flash clear lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
-/* Use hardware flash sectors protection instead of U-Boot software protection */
-#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
-#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
-#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
-/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
-#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
-
-/* Clock */
-#define CONFIG_SYS_CLK_FREQ	66666666
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
-/* Ether */
-#define CONFIG_SH_ETHER_USE_PORT (1)
-#define CONFIG_SH_ETHER_PHY_ADDR (0x00)
-#define CONFIG_BITBANGMII
-#define CONFIG_BITBANGMII_MULTI
-#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
-
-#endif /* __SH7763RDP_H */
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
deleted file mode 100644
index 241ba69fa0..0000000000
--- a/include/configs/ms7722se.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Hitachi Solution Engine 7722
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- */
-
-#ifndef __MS7722SE_H
-#define __MS7722SE_H
-
-#define CONFIG_CPU_SH7722	1
-
-#define CONFIG_DISPLAY_BOARDINFO
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-/* SMC9111 */
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE    (0xB8000000)
-
-/* MEMORY */
-#define MS7722SE_SDRAM_BASE	(0x8C000000)
-#define MS7722SE_FLASH_BASE_1	(0xA0000000)
-#define MS7722SE_FLASH_BANK_SIZE	(8*1024 * 1024)
-
-#define CONFIG_SYS_PBSIZE		256		/* Buffer size for Console output */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
-
-/* SCIF */
-#define CONFIG_CONS_SCIF0	1
-
-#define CONFIG_SYS_MEMTEST_START	(MS7722SE_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-
-#undef  CONFIG_SYS_MEMTEST_SCRATCH	/* Scratch address used by the alternate memory test */
-
-#undef  CONFIG_SYS_LOADS_BAUD_CHANGE	/* Enable temporary baudrate change while serial download */
-
-#define CONFIG_SYS_SDRAM_BASE	(MS7722SE_SDRAM_BASE)
-#define CONFIG_SYS_SDRAM_SIZE	(64 * 1024 * 1024)	/* maybe more, but if so u-boot doesn't know about it... */
-
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)	/* default load address for scripts ?!? */
-
-#define CONFIG_SYS_MONITOR_BASE	(MS7722SE_FLASH_BASE_1)	/* Address of u-boot image
-							in Flash (NOT run time address in SDRAM) ?!? */
-#define CONFIG_SYS_MONITOR_LEN	(128 * 1024)		/* */
-#define CONFIG_SYS_MALLOC_LEN	(256 * 1024)		/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
-
-/* FLASH */
-#undef  CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_SYS_FLASH_EMPTY_INFO			/* print 'E' for empty sector on flinfo */
-
-#define CONFIG_SYS_FLASH_BASE		(MS7722SE_FLASH_BASE_1)	/* Physical start address of Flash memory */
-
-#define CONFIG_SYS_MAX_FLASH_SECT	150		/* Max number of sectors on each
-							Flash chip */
-
-/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \
-				  CONFIG_SYS_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \
-				}
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)	/* Timeout for Flash erase operations (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)	/* Timeout for Flash write operations (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)	/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)	/* Timeout for Flash clear lock bit operations (in ms) */
-
-#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
-
-#define CONFIG_ENV_OVERWRITE	1
-#define CONFIG_ENV_SECT_SIZE	(8 * 1024)
-#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
-#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)	/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
-
-/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ	33333333
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
-#endif	/* __MS7722SE_H */
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
deleted file mode 100644
index 949fc04cc8..0000000000
--- a/include/configs/ms7750se.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Hitachi Solution Engine 7750
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- */
-
-#ifndef __MS7750SE_H
-#define __MS7750SE_H
-
-#define CONFIG_CPU_SH7750	1
-/* #define CONFIG_CPU_SH7751	1 */
-/* #define CONFIG_CPU_TYPE_R	1 */
-#define __LITTLE_ENDIAN__	1
-
-#define CONFIG_DISPLAY_BOARDINFO
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CONS_SCIF1	1
-
-#define CONFIG_ENV_OVERWRITE	1
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
-#define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
-
-#define CONFIG_SYS_PBSIZE		256
-
-#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - 0x100000)
-
-/* NOR Flash */
-/* #define CONFIG_SYS_FLASH_BASE		(0xA1000000)*/
-#define CONFIG_SYS_FLASH_BASE		(0xA0000000)
-#define CONFIG_SYS_MAX_FLASH_BANKS	(1)	/* Max number of
-					 * Flash memory banks
-					 */
-#define CONFIG_SYS_MAX_FLASH_SECT	142
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)	/* Address of u-boot image in Flash */
-#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)		/* Size of DRAM reserved for malloc() use */
-
-#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
-#define CONFIG_SYS_RX_ETH_BUFFER	(8)
-
-#undef CONFIG_SYS_FLASH_CFI_BROKEN_TABLE
-#undef  CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_SYS_FLASH_EMPTY_INFO				/* print 'E' for empty sector on flinfo */
-
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500
-
-/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ	33333333
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
-#endif /* __MS7750SE_H */
diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h
deleted file mode 100644
index 3e4ef763c9..0000000000
--- a/include/configs/r0p7734.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Renesas Solutions r0p7734 board
- *
- * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- */
-
-#ifndef __R0P7734_H
-#define __R0P7734_H
-
-#define CONFIG_CPU_SH7734	1
-#define CONFIG_400MHZ_MODE	1
-
-#define CONFIG_DISPLAY_BOARDINFO
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-/* Ether */
-#define CONFIG_SH_ETHER_USE_PORT (0)
-#define CONFIG_SH_ETHER_PHY_ADDR (0x0)
-#define CONFIG_PHY_SMSC 1
-#define CONFIG_BITBANGMII
-#define CONFIG_BITBANGMII_MULTI
-#define CONFIG_SH_ETHER_SH7734_MII (0x00) /* MII */
-#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
-
-/* undef to save memory	*/
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
-
-/* SCIF */
-#define CONFIG_SCIF			1
-#define CONFIG_CONS_SCIF3	1
-
-/* Suppress display of console information at boot */
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE	(0x88000000)
-#define CONFIG_SYS_SDRAM_SIZE	(128 * 1024 * 1024)
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
-
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END	 (CONFIG_SYS_MEMTEST_START + 100 * 1024 * 1024)
-/* Enable alternate, more extensive, memory test */
-/* Scratch address used by the alternate memory test */
-#undef  CONFIG_SYS_MEMTEST_SCRATCH
-
-/* Enable temporary baudrate change while serial download */
-#undef  CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/* FLASH */
-#undef  CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_BASE	(0xA0000000)
-#define CONFIG_SYS_MAX_FLASH_SECT	512
-
-/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-
-/* Timeout for Flash erase operations (in ms) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
-/* Timeout for Flash write operations (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
-/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
-/* Timeout for Flash clear lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
-
-/*
- * Use hardware flash sectors protection instead
- * of U-Boot software protection
- */
-#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
-/* Monitor size */
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
-/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
-
-/* ENV setting */
-#define CONFIG_ENV_OVERWRITE	1
-#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
-#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
-#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
-
-/* Board Clock */
-#if defined(CONFIG_400MHZ_MODE)
-#define CONFIG_SYS_CLK_FREQ 50000000
-#else
-#define CONFIG_SYS_CLK_FREQ 44444444
-#endif
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
-#endif	/* __R0P7734_H */