diff options
| author | Ye Li <ye.li@nxp.com> | 2018-09-25 20:27:48 -0700 |
|---|---|---|
| committer | Ye Li <ye.li@nxp.com> | 2018-10-24 20:22:43 -0700 |
| commit | 1742883a1e9c6a02045f81a14e4aa833c781afe9 (patch) | |
| tree | 6502d9cd4fb0e824e675d6c738fd37a985304c80 /configs | |
| parent | 6d6ee6f3e3c452c4980d9eb14ce41ca3130f41ab (diff) | |
MLK-20049-2 imx8mm_val: Add DDR3L validation board support
Add DDR3 init codes, board codes, defconfig and DTS into u-boot.
Basic modules are ready: SD, UART, I2C, USB host and NAND.
There is a FPGA on this board. It controls WDOG_B, and ENET PHY RESET.
So reset and ethernet won't work at default.
Signed-off-by: Ye Li <ye.li@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/imx8mm_ddr3l_val_defconfig | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/configs/imx8mm_ddr3l_val_defconfig b/configs/imx8mm_ddr3l_val_defconfig new file mode 100644 index 0000000000..5f7b9c9598 --- /dev/null +++ b/configs/imx8mm_ddr3l_val_defconfig @@ -0,0 +1,56 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8M=y +CONFIG_SYS_TEXT_BASE=0x40200000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_IMX8MM_DDR3L_VAL=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL_TEXT_BASE=0x7E1000" +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8mm-ddr3l-val" +CONFIG_DEFAULT_FDT_FILE="fsl-imx8mm-ddr3l-val.dtb" +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_OF_LIBFDT=y +CONFIG_FS_FAT=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_CMD_I2C=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_MEMTEST=y +CONFIG_OF_CONTROL=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MXC=y +CONFIG_DM_MMC=y +# CONFIG_DM_PMIC=y +CONFIG_DM_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX8M=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_NXP_TMU=y +CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y + +CONFIG_USB_GADGET=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET_SUPPORT=y +CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SDP_LOADADDR=0x40400000 +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 + +CONFIG_CMD_NAND=y +CONFIG_CMD_UBI=y |