summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
authorAlbert ARIBAUD <albert.u.boot@aribaud.net>2014-05-09 10:47:05 +0200
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2014-05-09 11:50:14 +0200
commitd2a3e911390f9fc4d8c0ee4b3c7fc75f4fd3fd19 (patch)
treed71aae6d706d1f3b01da5f944e247abe308feea0 /README
parent7904b70885f3c589c239f6ac978f299a6744557f (diff)
parent173d294b94cfec10063a5be40934d6d8fb7981ce (diff)
Merge branch 'u-boot/master'
Conflicts: drivers/net/Makefile (trivial merge)
Diffstat (limited to 'README')
-rw-r--r--README51
1 files changed, 40 insertions, 11 deletions
diff --git a/README b/README
index c9990e6796..61851b3d88 100644
--- a/README
+++ b/README
@@ -132,6 +132,10 @@ Directory Hierarchy:
====================
/arch Architecture specific files
+ /arc Files generic to ARC architecture
+ /cpu CPU specific files
+ /arc700 Files specific to ARC 700 CPUs
+ /lib Architecture specific library files
/arm Files generic to ARM architecture
/cpu CPU specific files
/arm720t Files specific to ARM 720 CPUs
@@ -164,7 +168,7 @@ Directory Hierarchy:
/mips Files generic to MIPS architecture
/cpu CPU specific files
/mips32 Files specific to MIPS32 CPUs
- /xburst Files specific to Ingenic XBurst CPUs
+ /mips64 Files specific to MIPS64 CPUs
/lib Architecture specific library files
/nds32 Files generic to NDS32 architecture
/cpu CPU specific files
@@ -427,6 +431,14 @@ The following options need to be configured:
In this mode, a single differential clock is used to supply
clocks to the sysclock, ddrclock and usbclock.
+ CONFIG_SYS_CPC_REINIT_F
+ This CONFIG is defined when the CPC is configured as SRAM at the
+ time of U-boot entry and is required to be re-initialized.
+
+ CONFIG_DEEP_SLEEP
+ Inidcates this SoC supports deep sleep feature. If deep sleep is
+ supported, core will start to execute uboot when wakes up.
+
- Generic CPU options:
CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
@@ -454,6 +466,9 @@ The following options need to be configured:
CONFIG_SYS_FSL_DDRC_GEN3
Freescale DDR3 controller.
+ CONFIG_SYS_FSL_DDRC_GEN4
+ Freescale DDR4 controller.
+
CONFIG_SYS_FSL_DDRC_ARM_GEN3
Freescale DDR3 controller for ARM-based SoCs.
@@ -469,7 +484,15 @@ The following options need to be configured:
CONFIG_SYS_FSL_DDR3
Board config to use DDR3. It can be enabled for SoCs with
- Freescale DDR3 controllers.
+ Freescale DDR3 or DDR3L controllers.
+
+ CONFIG_SYS_FSL_DDR3L
+ Board config to use DDR3L. It can be enabled for SoCs with
+ DDR3L controllers.
+
+ CONFIG_SYS_FSL_DDR4
+ Board config to use DDR4. It can be enabled for SoCs with
+ DDR4 controllers.
CONFIG_SYS_FSL_IFC_BE
Defines the IFC controller register space as Big Endian
@@ -486,6 +509,10 @@ The following options need to be configured:
PBI commands can be used to configure SoC before it starts the execution.
Please refer doc/README.pblimage for more details
+ CONFIG_SPL_FSL_PBL
+ It adds a target to create boot binary having SPL binary in PBI format
+ concatenated with u-boot binary.
+
CONFIG_SYS_FSL_DDR_BE
Defines the DDR controller register space as Big Endian
@@ -912,6 +939,7 @@ The following options need to be configured:
The default command configuration includes all commands
except those marked below with a "*".
+ CONFIG_CMD_AES AES 128 CBC encrypt/decrypt
CONFIG_CMD_ASKENV * ask for env variable
CONFIG_CMD_BDI bdinfo
CONFIG_CMD_BEDBUG * Include BedBug Debugger
@@ -1456,13 +1484,6 @@ The following options need to be configured:
for your device
- CONFIG_USBD_PRODUCTID 0xFFFF
- Some USB device drivers may need to check USB cable attachment.
- In this case you can enable following config in BoardName.h:
- CONFIG_USB_CABLE_CHECK
- This enables function definition:
- - usb_cable_connected() in include/usb.h
- Implementation of this function is board-specific.
-
- ULPI Layer Support:
The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via
the generic ULPI layer. The generic layer accesses the ULPI PHY
@@ -3316,6 +3337,9 @@ FIT uImage format:
continuing (the hardware starts execution after just
loading the first page rather than the full 4K).
+ CONFIG_SPL_SKIP_RELOCATE
+ Avoid SPL relocation
+
CONFIG_SPL_NAND_BASE
Include nand_base.c in the SPL. Requires
CONFIG_SPL_NAND_DRIVERS.
@@ -4510,8 +4534,13 @@ This firmware often needs to be loaded during U-Boot booting, so macros
are used to identify the storage device (NOR flash, SPI, etc) and the address
within that device.
-- CONFIG_SYS_QE_FMAN_FW_ADDR
- The address in the storage device where the firmware is located. The
+- CONFIG_SYS_FMAN_FW_ADDR
+ The address in the storage device where the FMAN microcode is located. The
+ meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
+ is also specified.
+
+- CONFIG_SYS_QE_FW_ADDR
+ The address in the storage device where the QE microcode is located. The
meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
is also specified.