Merge branch 'master' of git://git.denx.de/u-boot-uniphier

46 files changed, 1033 insertions, 227 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d2dbb1a5c2..d8b63e9407 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -689,6 +689,7 @@ config TARGET_COLIBRI_PXA270
 
 config ARCH_UNIPHIER
 	bool "Socionext UniPhier SoCs"
+	select CLK_UNIPHIER
 	select CPU_V7
 	select SUPPORT_SPL
 	select SPL
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0fa5796946..b574284262 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -59,7 +59,9 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ph1-ld4-ref.dtb \
 	uniphier-ph1-ld6b-ref.dtb \
+	uniphier-ph1-pro4-ace.dtb \
 	uniphier-ph1-pro4-ref.dtb \
+	uniphier-ph1-pro4-sanji.dtb \
 	uniphier-ph1-pro5-4kbox.dtb \
 	uniphier-ph1-sld3-ref.dtb \
 	uniphier-ph1-sld8-ref.dtb \
diff --git a/arch/arm/dts/uniphier-common32.dtsi b/arch/arm/dts/uniphier-common32.dtsi
index 5d4b2cf4c3..59511bde94 100644
--- a/arch/arm/dts/uniphier-common32.dtsi
+++ b/arch/arm/dts/uniphier-common32.dtsi
@@ -9,6 +9,13 @@
 /include/ "skeleton.dtsi"
 
 / {
+	clocks {
+		refclk: ref {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -67,6 +74,18 @@
 			reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
 		};
 
+		mio: mioctrl@59810000 {
+			/* specify compatible in each SoC DTSI */
+			reg = <0x59810000 0x800>;
+			#clock-cells = <1>;
+		};
+
+		peri: perictrl@59820000 {
+			/* specify compatible in each SoC DTSI */
+			reg = <0x59820000 0x200>;
+			#clock-cells = <1>;
+		};
+
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
@@ -94,6 +113,14 @@
 			reg = <0x5f801000 0xe00>;
 		};
 
+		sysctrl: sysctrl@61840000 {
+			/* specify compatible in each SoC DTSI */
+			reg = <0x61840000 0x4000>;
+			#clock-cells = <1>;
+			clock-names = "ref";
+			clocks = <&refclk>;
+		};
+
 		nand: nand@68000000 {
 			compatible = "denali,denali-nand-dt";
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
diff --git a/arch/arm/dts/uniphier-ph1-ld4.dtsi b/arch/arm/dts/uniphier-ph1-ld4.dtsi
index 856c207b13..7c8759f929 100644
--- a/arch/arm/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/dts/uniphier-ph1-ld4.dtsi
@@ -115,6 +115,7 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb0>;
+		clocks = <&mio 3>, <&mio 6>;
 	};
 
 	usb1: usb@5a810100 {
@@ -124,6 +125,7 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb1>;
+		clocks = <&mio 4>, <&mio 6>;
 	};
 
 	usb2: usb@5a820100 {
@@ -133,9 +135,14 @@
 		interrupts = <0 82 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
+		clocks = <&mio 5>, <&mio 6>;
 	};
 };
 
+&refclk {
+	clock-frequency = <24576000>;
+};
+
 &serial0 {
 	clock-frequency = <36864000>;
 };
@@ -153,6 +160,22 @@
 	clock-frequency = <36864000>;
 };
 
+&mio {
+	compatible = "socionext,ph1-ld4-mioctrl";
+	clock-names = "stdmac", "ehci";
+	clocks = <&sysctrl 10>, <&sysctrl 18>;
+};
+
+&peri {
+	compatible = "socionext,ph1-ld4-perictrl";
+	clock-names = "uart", "i2c";
+	clocks = <&sysctrl 3>, <&sysctrl 4>;
+};
+
 &pinctrl {
 	compatible = "socionext,ph1-ld4-pinctrl", "syscon";
 };
+
+&sysctrl {
+	compatible = "socionext,ph1-ld4-sysctrl";
+};
diff --git a/arch/arm/dts/uniphier-ph1-pro4-ace.dts b/arch/arm/dts/uniphier-ph1-pro4-ace.dts
new file mode 100644
index 0000000000..6e741ea45b
--- /dev/null
+++ b/arch/arm/dts/uniphier-ph1-pro4-ace.dts
@@ -0,0 +1,105 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Ace Board
+ *
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	X11
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+
+/ {
+	model = "UniPhier PH1-Pro4 Ace Board";
+	compatible = "socionext,ph1-pro4-ace", "socionext,ph1-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom {
+		compatible = "24c64", "i2c-eeprom";
+		reg = <0x54>;
+		u-boot,i2c-offset-len = <2>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+/* for U-Boot only */
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&serial0 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/uniphier-ph1-pro4-sanji.dts b/arch/arm/dts/uniphier-ph1-pro4-sanji.dts
new file mode 100644
index 0000000000..91a71ef469
--- /dev/null
+++ b/arch/arm/dts/uniphier-ph1-pro4-sanji.dts
@@ -0,0 +1,100 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Sanji Board
+ *
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	X11
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+
+/ {
+	model = "UniPhier PH1-Pro4 Sanji Board";
+	compatible = "socionext,ph1-pro4-sanji", "socionext,ph1-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom {
+		compatible = "24c64", "i2c-eeprom";
+		reg = <0x54>;
+		u-boot,i2c-offset-len = <2>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+/* for U-Boot only */
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&serial0 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/uniphier-ph1-pro4.dtsi b/arch/arm/dts/uniphier-ph1-pro4.dtsi
index 244ccf67e6..cb5b8f1a86 100644
--- a/arch/arm/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/dts/uniphier-ph1-pro4.dtsi
@@ -147,6 +147,7 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
+		clocks = <&mio 3>, <&mio 6>;
 	};
 
 	usb3: usb@5a810100 {
@@ -156,6 +157,7 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb3>;
+		clocks = <&mio 4>, <&mio 6>;
 	};
 
 	usb0: usb@65a00000 {
@@ -177,6 +179,10 @@
 	};
 };
 
+&refclk {
+	clock-frequency = <25000000>;
+};
+
 &serial0 {
 	clock-frequency = <73728000>;
 };
@@ -193,6 +199,22 @@
 	clock-frequency = <73728000>;
 };
 
+&mio {
+	compatible = "socionext,ph1-pro4-mioctrl";
+	clock-names = "stdmac", "ehci";
+	clocks = <&sysctrl 10>, <&sysctrl 18>;
+};
+
+&peri {
+	compatible = "socionext,ph1-pro4-perictrl";
+	clock-names = "uart", "fi2c";
+	clocks = <&sysctrl 3>, <&sysctrl 4>;
+};
+
 &pinctrl {
 	compatible = "socionext,ph1-pro4-pinctrl", "syscon";
 };
+
+&sysctrl {
+	compatible = "socionext,ph1-pro4-sysctrl";
+};
diff --git a/arch/arm/dts/uniphier-ph1-pro5.dtsi b/arch/arm/dts/uniphier-ph1-pro5.dtsi
index 00491062fe..087b25a950 100644
--- a/arch/arm/dts/uniphier-ph1-pro5.dtsi
+++ b/arch/arm/dts/uniphier-ph1-pro5.dtsi
@@ -171,6 +171,10 @@
 	};
 };
 
+&refclk {
+	clock-frequency = <20000000>;
+};
+
 &serial0 {
 	clock-frequency = <73728000>;
 };
@@ -187,6 +191,22 @@
 	clock-frequency = <73728000>;
 };
 
+&mio {
+	compatible = "socionext,ph1-pro5-mioctrl";
+	clock-names = "stdmac";
+	clocks = <&sysctrl 10>;
+};
+
+&peri {
+	compatible = "socionext,ph1-pro5-perictrl";
+	clock-names = "uart", "fi2c";
+	clocks = <&sysctrl 3>, <&sysctrl 4>;
+};
+
 &pinctrl {
 	compatible = "socionext,ph1-pro5-pinctrl", "syscon";
 };
+
+&sysctrl {
+	compatible = "socionext,ph1-pro5-sysctrl";
+};
diff --git a/arch/arm/dts/uniphier-ph1-sld3.dtsi b/arch/arm/dts/uniphier-ph1-sld3.dtsi
index f481521a0f..85dde66f07 100644
--- a/arch/arm/dts/uniphier-ph1-sld3.dtsi
+++ b/arch/arm/dts/uniphier-ph1-sld3.dtsi
@@ -30,6 +30,12 @@
 	};
 
 	clocks {
+		refclk: ref {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24576000>;
+		};
+
 		arm_timer_clk: arm_timer_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -172,11 +178,20 @@
 			reg = <0x59800000 0x2000>;
 		};
 
+		mio: mioctrl@59810000 {
+			compatible = "socionext,ph1-sld3-mioctrl";
+			reg = <0x59810000 0x800>;
+			#clock-cells = <1>;
+			clock-names = "stdmac", "ehci";
+			clocks = <&sysctrl 10>, <&sysctrl 18>;
+		};
+
 		usb0: usb@5a800100 {
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a800100 0x100>;
 			interrupts = <0 80 4>;
+			clocks = <&mio 3>, <&mio 6>;
 		};
 
 		usb1: usb@5a810100 {
@@ -184,6 +199,7 @@
 			status = "disabled";
 			reg = <0x5a810100 0x100>;
 			interrupts = <0 81 4>;
+			clocks = <&mio 4>, <&mio 6>;
 		};
 
 		usb2: usb@5a820100 {
@@ -191,6 +207,7 @@
 			status = "disabled";
 			reg = <0x5a820100 0x100>;
 			interrupts = <0 82 4>;
+			clocks = <&mio 5>, <&mio 6>;
 		};
 
 		usb3: usb@5a830100 {
@@ -198,6 +215,15 @@
 			status = "disabled";
 			reg = <0x5a830100 0x100>;
 			interrupts = <0 83 4>;
+			clocks = <&mio 7>, <&mio 6>;
+		};
+
+		sysctrl: sysctrl@f1840000 {
+			compatible = "socionext,ph1-sld3-sysctrl";
+			reg = <0xf1840000 0x4000>;
+			#clock-cells = <1>;
+			clock-names = "ref";
+			clocks = <&refclk>;
 		};
 
 		nand: nand@f8000000 {
diff --git a/arch/arm/dts/uniphier-ph1-sld8.dtsi b/arch/arm/dts/uniphier-ph1-sld8.dtsi
index cb28bc4508..f93db83661 100644
--- a/arch/arm/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/dts/uniphier-ph1-sld8.dtsi
@@ -115,6 +115,7 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb0>;
+		clocks = <&mio 3>, <&mio 6>;
 	};
 
 	usb1: usb@5a810100 {
@@ -124,6 +125,7 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb1>;
+		clocks = <&mio 4>, <&mio 6>;
 	};
 
 	usb2: usb@5a820100 {
@@ -133,9 +135,14 @@
 		interrupts = <0 82 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
+		clocks = <&mio 5>, <&mio 6>;
 	};
 };
 
+&refclk {
+	clock-frequency = <25000000>;
+};
+
 &serial0 {
 	clock-frequency = <80000000>;
 };
@@ -153,6 +160,22 @@
 	clock-frequency = <80000000>;
 };
 
+&mio {
+	compatible = "socionext,ph1-sld8-mioctrl";
+	clock-names = "stdmac", "ehci";
+	clocks = <&sysctrl 10>, <&sysctrl 18>;
+};
+
+&peri {
+	compatible = "socionext,ph1-sld8-perictrl";
+	clock-names = "uart", "i2c";
+	clocks = <&sysctrl 3>, <&sysctrl 4>;
+};
+
 &pinctrl {
 	compatible = "socionext,ph1-sld8-pinctrl", "syscon";
 };
+
+&sysctrl {
+	compatible = "socionext,ph1-sld8-sysctrl";
+};
diff --git a/arch/arm/dts/uniphier-proxstream2-gentil.dts b/arch/arm/dts/uniphier-proxstream2-gentil.dts
index c6c133aa19..dc0def30fd 100644
--- a/arch/arm/dts/uniphier-proxstream2-gentil.dts
+++ b/arch/arm/dts/uniphier-proxstream2-gentil.dts
@@ -27,6 +27,7 @@
 		serial1 = &serial1;
 		serial2 = &serial2;
 		i2c0 = &i2c0;
+		i2c2 = &i2c2;
 		i2c4 = &i2c4;
 		i2c5 = &i2c5;
 		i2c6 = &i2c6;
@@ -39,6 +40,16 @@
 
 &i2c0 {
 	status = "okay";
+
+	eeprom {
+		compatible = "24c64", "i2c-eeprom";
+		reg = <0x54>;
+		u-boot,i2c-offset-len = <2>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
 };
 
 &usb0 {
diff --git a/arch/arm/dts/uniphier-proxstream2.dtsi b/arch/arm/dts/uniphier-proxstream2.dtsi
index 3ba6a4ae51..2d324f95a4 100644
--- a/arch/arm/dts/uniphier-proxstream2.dtsi
+++ b/arch/arm/dts/uniphier-proxstream2.dtsi
@@ -182,6 +182,10 @@
 	};
 };
 
+&refclk {
+	clock-frequency = <25000000>;
+};
+
 &serial0 {
 	clock-frequency = <88900000>;
 };
@@ -198,6 +202,22 @@
 	clock-frequency = <88900000>;
 };
 
+&mio {
+	compatible = "socionext,proxstream2-mioctrl";
+	clock-names = "stdmac";
+	clocks = <&sysctrl 10>;
+};
+
+&peri {
+	compatible = "socionext,proxstream2-perictrl";
+	clock-names = "uart", "fi2c";
+	clocks = <&sysctrl 3>, <&sysctrl 4>;
+};
+
 &pinctrl {
 	compatible = "socionext,proxstream2-pinctrl", "syscon";
 };
+
+&sysctrl {
+	compatible = "socionext,proxstream2-sysctrl";
+};
diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h
index 5c5d33f0bd..19c38f4083 100644
--- a/arch/arm/include/asm/spl.h
+++ b/arch/arm/include/asm/spl.h
@@ -24,6 +24,7 @@ enum {
 	BOOT_DEVICE_NOR,
 	BOOT_DEVICE_UART,
 	BOOT_DEVICE_SPI,
+	BOOT_DEVICE_USB,
 	BOOT_DEVICE_SATA,
 	BOOT_DEVICE_I2C,
 	BOOT_DEVICE_BOARD,
diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index ea3ae5425e..e65d602350 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -5,9 +5,8 @@
 ifdef CONFIG_SPL_BUILD
 
 obj-y += lowlevel_init.o
-obj-y += init_page_table.o
 
-obj-y += init/ bcu/ memconf/ pll/ early-clk/ early-pinctrl/ dram/
+obj-y += init/ bcu/ memconf/ pll/ early-clk/ early-pinctrl/
 obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/
 
 obj-$(CONFIG_DEBUG_LL) += debug_ll.o
@@ -33,5 +32,6 @@ obj-y += timer.o
 obj-y += boards.o
 obj-y += soc_info.o
 obj-y += boot-mode/
+obj-y += dram/
 
 obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o
diff --git a/arch/arm/mach-uniphier/board_late_init.c b/arch/arm/mach-uniphier/board_late_init.c
index c2a32618ac..6e2008ccd7 100644
--- a/arch/arm/mach-uniphier/board_late_init.c
+++ b/arch/arm/mach-uniphier/board_late_init.c
@@ -11,6 +11,8 @@
 #include <linux/io.h>
 #include <../drivers/mtd/nand/denali.h>
 
+#include "boot-mode/boot-device.h"
+
 static void nand_denali_wp_disable(void)
 {
 #ifdef CONFIG_NAND_DENALI
@@ -35,7 +37,9 @@ static const struct uniphier_fdt_file uniphier_fdt_files[] = {
 	{ "socionext,ph1-ld4-ref", "uniphier-ph1-ld4-ref.dtb", },
 	{ "socionext,ph1-ld6b-ref", "uniphier-ph1-ld6b-ref.dtb", },
 	{ "socionext,ph1-ld10-ref", "uniphier-ph1-ld10-ref.dtb", },
+	{ "socionext,ph1-pro4-ace", "uniphier-ph1-pro4-ace.dtb", },
 	{ "socionext,ph1-pro4-ref", "uniphier-ph1-pro4-ref.dtb", },
+	{ "socionext,ph1-pro4-sanji", "uniphier-ph1-pro4-sanji.dtb", },
 	{ "socionext,ph1-pro5-4kbox", "uniphier-ph1-pro5-4kbox.dtb", },
 	{ "socionext,ph1-sld3-ref", "uniphier-ph1-sld3-ref.dtb", },
 	{ "socionext,ph1-sld8-ref", "uniphier-ph1-sld8-ref.dtb", },
@@ -62,7 +66,7 @@ int board_late_init(void)
 {
 	puts("MODE:  ");
 
-	switch (spl_boot_device()) {
+	switch (spl_boot_device_raw()) {
 	case BOOT_DEVICE_MMC1:
 		printf("eMMC Boot\n");
 		setenv("bootmode", "emmcboot");
@@ -76,6 +80,10 @@ int board_late_init(void)
 		printf("NOR Boot\n");
 		setenv("bootmode", "norboot");
 		break;
+	case BOOT_DEVICE_USB:
+		printf("USB Boot\n");
+		setenv("bootmode", "usbboot");
+		break;
 	default:
 		printf("Unsupported Boot Mode\n");
 		return -1;
diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c
index f12415022b..d70c712206 100644
--- a/arch/arm/mach-uniphier/boards.c
+++ b/arch/arm/mach-uniphier/boards.c
@@ -40,6 +40,7 @@ static const struct uniphier_board_data ph1_ld4_data = {
 #endif
 
 #if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
+/* 1GB RAM board */
 static const struct uniphier_board_data ph1_pro4_data = {
 	.dram_ch0_base	= 0x80000000,
 	.dram_ch0_size	= 0x20000000,
@@ -49,6 +50,17 @@ static const struct uniphier_board_data ph1_pro4_data = {
 	.dram_ch1_width	= 32,
 	.dram_freq	= 1600,
 };
+
+/* 2GB RAM board */
+static const struct uniphier_board_data ph1_pro4_2g_data = {
+	.dram_ch0_base	= 0x80000000,
+	.dram_ch0_size	= 0x40000000,
+	.dram_ch0_width	= 32,
+	.dram_ch1_base	= 0xc0000000,
+	.dram_ch1_size	= 0x40000000,
+	.dram_ch1_width	= 32,
+	.dram_freq	= 1600,
+};
 #endif
 
 #if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
@@ -118,6 +130,8 @@ static const struct uniphier_board_id uniphier_boards[] = {
 	{ "socionext,ph1-ld4", &ph1_ld4_data, },
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
+	{ "socionext,ph1-pro4-ace", &ph1_pro4_2g_data, },
+	{ "socionext,ph1-pro4-sanji", &ph1_pro4_2g_data, },
 	{ "socionext,ph1-pro4", &ph1_pro4_data, },
 #endif
 #if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
diff --git a/arch/arm/mach-uniphier/boot-mode/boot-device.h b/arch/arm/mach-uniphier/boot-mode/boot-device.h
index 2ab5a535fa..1c59aaa606 100644
--- a/arch/arm/mach-uniphier/boot-mode/boot-device.h
+++ b/arch/arm/mach-uniphier/boot-mode/boot-device.h
@@ -22,4 +22,6 @@ void ph1_ld4_boot_mode_show(void);
 void ph1_pro5_boot_mode_show(void);
 void proxstream2_boot_mode_show(void);
 
+u32 spl_boot_device_raw(void);
+
 #endif /* _ASM_BOOT_DEVICE_H_ */
diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
index de12953585..1b0c183808 100644
--- a/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c
@@ -46,7 +46,7 @@ static struct boot_device_info boot_device_table[] = {
 	{BOOT_DEVICE_NONE, "Reserved"},
 };
 
-int get_boot_mode_sel(void)
+static int get_boot_mode_sel(void)
 {
 	return (readl(SG_PINMON0) >> 1) & 0x1f;
 }
@@ -55,6 +55,9 @@ u32 proxstream2_boot_device(void)
 {
 	int boot_mode;
 
+	if (readl(SG_PINMON0) & BIT(6))
+		return BOOT_DEVICE_USB;
+
 	boot_mode = get_boot_mode_sel();
 
 	return boot_device_table[boot_mode].type;
diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode.c
index 0c5749badb..935e551472 100644
--- a/arch/arm/mach-uniphier/boot-mode/boot-mode.c
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode.c
@@ -11,7 +11,7 @@
 #include "../soc-info.h"
 #include "boot-device.h"
 
-u32 spl_boot_device(void)
+u32 spl_boot_device_raw(void)
 {
 	if (boot_is_swapped())
 		return BOOT_DEVICE_NOR;
@@ -43,3 +43,12 @@ u32 spl_boot_device(void)
 		return BOOT_DEVICE_NONE;
 	}
 }
+
+u32 spl_boot_device(void)
+{
+	u32 ret;
+
+	ret = spl_boot_device_raw();
+
+	return ret == BOOT_DEVICE_USB ? BOOT_DEVICE_NOR : ret;
+}
diff --git a/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c b/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c
index 4de9bfb102..7a34beea03 100644
--- a/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c
+++ b/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c
@@ -18,7 +18,7 @@ void ph1_ld4_clk_init(void)
 #ifdef CONFIG_UNIPHIER_ETH
 	tmp |= SC_RSTCTRL_NRST_ETHER;
 #endif
-#ifdef CONFIG_USB_EHCI_UNIPHIER
+#ifdef CONFIG_USB_EHCI
 	tmp |= SC_RSTCTRL_NRST_STDMAC;
 #endif
 #ifdef CONFIG_NAND_DENALI
@@ -32,7 +32,7 @@ void ph1_ld4_clk_init(void)
 #ifdef CONFIG_UNIPHIER_ETH
 	tmp |= SC_CLKCTRL_CEN_ETHER;
 #endif
-#ifdef CONFIG_USB_EHCI_UNIPHIER
+#ifdef CONFIG_USB_EHCI
 	tmp |= SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_STDMAC;
 #endif
 #ifdef CONFIG_NAND_DENALI
diff --git a/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c b/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c
index 3df017edd2..c784c314e1 100644
--- a/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c
+++ b/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c
@@ -22,7 +22,7 @@ void ph1_pro4_clk_init(void)
 #ifdef CONFIG_UNIPHIER_ETH
 	tmp |= SC_RSTCTRL_NRST_ETHER;
 #endif
-#ifdef CONFIG_USB_EHCI_UNIPHIER
+#ifdef CONFIG_USB_EHCI
 	tmp |= SC_RSTCTRL_NRST_STDMAC;
 #endif
 #ifdef CONFIG_NAND_DENALI
@@ -47,7 +47,7 @@ void ph1_pro4_clk_init(void)
 #ifdef CONFIG_UNIPHIER_ETH
 	tmp |= SC_CLKCTRL_CEN_ETHER;
 #endif
-#ifdef CONFIG_USB_EHCI_UNIPHIER
+#ifdef CONFIG_USB_EHCI
 	tmp |= SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_STDMAC;
 #endif
 #ifdef CONFIG_NAND_DENALI
diff --git a/arch/arm/mach-uniphier/dram/Makefile b/arch/arm/mach-uniphier/dram/Makefile
index cab7df1653..a0a6003065 100644
--- a/arch/arm/mach-uniphier/dram/Makefile
+++ b/arch/arm/mach-uniphier/dram/Makefile
@@ -2,6 +2,8 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
+ifdef CONFIG_SPL_BUILD
+
 obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4)	+= umc-ph1-ld4.o \
 					   ddrphy-training.o ddrphy-ph1-ld4.o
 obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4)	+= umc-ph1-pro4.o \
@@ -11,5 +13,9 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8)	+= umc-ph1-sld8.o \
 obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)	+= umc-proxstream2.o
 obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B)	+= umc-proxstream2.o
 
+else
+
 obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o
 obj-$(CONFIG_CMD_DDRMPHY_DUMP) += cmd_ddrmphy.o
+
+endif
diff --git a/arch/arm/mach-uniphier/cmd_ddrmphy.c b/arch/arm/mach-uniphier/dram/cmd_ddrmphy.c
index c18f099f2c..c18f099f2c 100644
--- a/arch/arm/mach-uniphier/cmd_ddrmphy.c
+++ b/arch/arm/mach-uniphier/dram/cmd_ddrmphy.c
diff --git a/arch/arm/mach-uniphier/dram/umc-ph1-pro4.c b/arch/arm/mach-uniphier/dram/umc-ph1-pro4.c
index 4d976e3a97..261f7cfce7 100644
--- a/arch/arm/mach-uniphier/dram/umc-ph1-pro4.c
+++ b/arch/arm/mach-uniphier/dram/umc-ph1-pro4.c
@@ -13,6 +13,16 @@
 #include "ddrphy-regs.h"
 #include "umc-regs.h"
 
+enum dram_size {
+	DRAM_SZ_128M,
+	DRAM_SZ_256M,
+	DRAM_SZ_512M,
+	DRAM_SZ_NR,
+};
+
+static u32 umc_initctlb[DRAM_SZ_NR] = {0x43030d3f, 0x43030d3f, 0x7b030d3f};
+static u32 umc_spcctla[DRAM_SZ_NR] = {0x002b0617, 0x003f0617, 0x00770617};
+
 static void umc_start_ssif(void __iomem *ssif_base)
 {
 	writel(0x00000001, ssif_base + 0x0000b004);
@@ -56,19 +66,36 @@ static void umc_start_ssif(void __iomem *ssif_base)
 	writel(0x00000001, ssif_base + UMC_DMDRST);
 }
 
-static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
-			      int size, int freq)
+static int umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
+			     int size, int width)
 {
+	enum dram_size dram_size;
+
+	switch (size / (width / 16)) {
+	case SZ_128M:
+		dram_size = DRAM_SZ_128M;
+		break;
+	case SZ_256M:
+		dram_size = DRAM_SZ_256M;
+		break;
+	case SZ_512M:
+		dram_size = DRAM_SZ_512M;
+		break;
+	default:
+		printf("unsupported DRAM size\n");
+		return -EINVAL;
+	}
+
 	writel(0x66bb0f17, dramcont + UMC_CMDCTLA);
 	writel(0x18c6aa44, dramcont + UMC_CMDCTLB);
 	writel(0x5101387f, dramcont + UMC_INITCTLA);
-	writel(0x43030d3f, dramcont + UMC_INITCTLB);
+	writel(umc_initctlb[dram_size], dramcont + UMC_INITCTLB);
 	writel(0x00ff00ff, dramcont + UMC_INITCTLC);
 	writel(0x00000d71, dramcont + UMC_DRMMR0);
 	writel(0x00000006, dramcont + UMC_DRMMR1);
 	writel(0x00000298, dramcont + UMC_DRMMR2);
 	writel(0x00000000, dramcont + UMC_DRMMR3);
-	writel(0x003f0617, dramcont + UMC_SPCCTLA);
+	writel(umc_spcctla[dram_size], dramcont + UMC_SPCCTLA);
 	writel(0x00ff0008, dramcont + UMC_SPCCTLB);
 	writel(0x000c00ae, dramcont + UMC_RDATACTL_D0);
 	writel(0x000c00ae, dramcont + UMC_RDATACTL_D1);
@@ -90,9 +117,11 @@ static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
 	writel(0x200a0a00, dramcont + UMC_SPCSETB);
 	writel(0x00010000, dramcont + UMC_SPCSETD);
 	writel(0x80000020, dramcont + UMC_DFICUPDCTLA);
+
+	return 0;
 }
 
-static int umc_init_sub(int freq, int size_ch0, int size_ch1)
+int ph1_pro4_umc_init(const struct uniphier_board_data *bd)
 {
 	void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
 	void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
@@ -103,6 +132,12 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1)
 	void __iomem *phy0_1 = (void __iomem *)DDRPHY_BASE(0, 1);
 	void __iomem *phy1_0 = (void __iomem *)DDRPHY_BASE(1, 0);
 	void __iomem *phy1_1 = (void __iomem *)DDRPHY_BASE(1, 1);
+	int ret;
+
+	if (bd->dram_freq != 1600) {
+		pr_err("Unsupported DDR configuration\n");
+		return -EINVAL;
+	}
 
 	umc_dram_init_start(dramcont0);
 	umc_dram_init_start(dramcont1);
@@ -111,52 +146,43 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1)
 
 	writel(0x00000101, dramcont0 + UMC_DIOCTLA);
 
-	ph1_pro4_ddrphy_init(phy0_0, freq, size_ch0);
+	ph1_pro4_ddrphy_init(phy0_0, bd->dram_freq, bd->dram_ch0_size);
 
 	ddrphy_prepare_training(phy0_0, 0);
 	ddrphy_training(phy0_0);
 
 	writel(0x00000103, dramcont0 + UMC_DIOCTLA);
 
-	ph1_pro4_ddrphy_init(phy0_1, freq, size_ch0);
+	ph1_pro4_ddrphy_init(phy0_1, bd->dram_freq, bd->dram_ch0_size);
 
 	ddrphy_prepare_training(phy0_1, 1);
 	ddrphy_training(phy0_1);
 
 	writel(0x00000101, dramcont1 + UMC_DIOCTLA);
 
-	ph1_pro4_ddrphy_init(phy1_0, freq, size_ch1);
+	ph1_pro4_ddrphy_init(phy1_0, bd->dram_freq, bd->dram_ch1_size);
 
 	ddrphy_prepare_training(phy1_0, 0);
 	ddrphy_training(phy1_0);
 
 	writel(0x00000103, dramcont1 + UMC_DIOCTLA);
 
-	ph1_pro4_ddrphy_init(phy1_1, freq, size_ch1);
+	ph1_pro4_ddrphy_init(phy1_1, bd->dram_freq, bd->dram_ch1_size);
 
 	ddrphy_prepare_training(phy1_1, 1);
 	ddrphy_training(phy1_1);
 
-	umc_dramcont_init(dramcont0, ca_base0, size_ch0, freq);
-	umc_dramcont_init(dramcont1, ca_base1, size_ch1, freq);
+	ret = umc_dramcont_init(dramcont0, ca_base0, bd->dram_ch0_size,
+				bd->dram_ch0_width);
+	if (ret)
+		return ret;
+
+	ret = umc_dramcont_init(dramcont1, ca_base1, bd->dram_ch1_size,
+				bd->dram_ch1_width);
+	if (ret)
+		return ret;
 
 	umc_start_ssif(ssif_base);
 
 	return 0;
 }
-
-int ph1_pro4_umc_init(const struct uniphier_board_data *bd)
-{
-	if (((bd->dram_ch0_size == SZ_512M && bd->dram_ch0_width == 32) ||
-	     (bd->dram_ch0_size == SZ_256M && bd->dram_ch0_width == 16)) &&
-	    ((bd->dram_ch1_size == SZ_512M && bd->dram_ch1_width == 32) ||
-	     (bd->dram_ch1_size == SZ_256M && bd->dram_ch1_width == 16)) &&
-	    bd->dram_freq == 1600) {
-		return umc_init_sub(bd->dram_freq,
-				    bd->dram_ch0_size / SZ_128M,
-				    bd->dram_ch1_size / SZ_128M);
-	} else {
-		pr_err("Unsupported DDR configuration\n");
-		return -EINVAL;
-	}
-}
diff --git a/arch/arm/mach-uniphier/dram/umc-proxstream2.c b/arch/arm/mach-uniphier/dram/umc-proxstream2.c
index bb7acdee1e..6e7fa885c4 100644
--- a/arch/arm/mach-uniphier/dram/umc-proxstream2.c
+++ b/arch/arm/mach-uniphier/dram/umc-proxstream2.c
@@ -18,6 +18,8 @@
 #include "ddrmphy-regs.h"
 #include "umc-regs.h"
 
+#define CH_NR	3
+
 enum dram_freq {
 	FREQ_1866M,
 	FREQ_2133M,
@@ -43,6 +45,9 @@ static u32 ddrphy_dtpr3[FREQ_NR] = {0x0010cb49, 0x0010ec89};
 static u32 ddrphy_mr0[FREQ_NR] = {0x00000115, 0x00000125};
 static u32 ddrphy_mr2[FREQ_NR] = {0x000002a0, 0x000002a8};
 
+/* dependent on package and board design */
+static u32 ddrphy_acbdlr0[CH_NR] = {0x0000000c, 0x0000000c, 0x00000009};
+
 static u32 umc_cmdctla[FREQ_NR] = {0x66DD131D, 0x77EE1722};
 /*
  * The ch2 is a different generation UMC core.
@@ -150,7 +155,8 @@ static int ddrphy_get_system_latency(void __iomem *phy_base, int width)
 	return dgsl_max;
 }
 
-static void ddrphy_init(void __iomem *phy_base, enum dram_freq freq, int width)
+static void ddrphy_init(void __iomem *phy_base, enum dram_freq freq, int width,
+			int ch)
 {
 	u32 tmp;
 	void __iomem *zq_base, *dx_base;
@@ -178,6 +184,8 @@ static void ddrphy_init(void __iomem *phy_base, enum dram_freq freq, int width)
 	writel(ddrphy_ptr3[freq],  phy_base + DMPHY_PTR3);
 	writel(ddrphy_ptr4[freq],  phy_base + DMPHY_PTR4);
 
+	writel(ddrphy_acbdlr0[ch], phy_base + DMPHY_ACBDLR0);
+
 	writel(0x55555555, phy_base + DMPHY_ACIOCR1);
 	writel(0x00000000, phy_base + DMPHY_ACIOCR2);
 	writel(0x55555555, phy_base + DMPHY_ACIOCR3);
@@ -528,7 +536,7 @@ static int umc_init(void __iomem *umc_base, enum dram_freq freq, int ch,
 	writel(UMC_DIOCTLA_CTL_NRST | UMC_DIOCTLA_CFG_NRST,
 	       umc_dc_base + UMC_DIOCTLA);
 
-	ddrphy_init(phy_base, freq, width);
+	ddrphy_init(phy_base, freq, width, ch);
 
 	ret = ddrphy_impedance_calibration(phy_base);
 	if (ret)
diff --git a/arch/arm/mach-uniphier/include/mach/mio-regs.h b/arch/arm/mach-uniphier/include/mach/mio-regs.h
deleted file mode 100644
index 3306934ff7..0000000000
--- a/arch/arm/mach-uniphier/include/mach/mio-regs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * UniPhier MIO (Media I/O) registers
- *
- * Copyright (C) 2014 Panasonic Corporation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef ARCH_MIO_REGS_H
-#define ARCH_MIO_REGS_H
-
-#define MIO_BASE		0x59810000
-
-#define MIO_CLKCTRL(i)		(MIO_BASE + 0x200 * (i) + 0x0020)
-#define MIO_RSTCTRL(i)		(MIO_BASE + 0x200 * (i) + 0x0110)
-#define MIO_USB_RSTCTRL(i)	(MIO_BASE + 0x200 * (i) + 0x0114)
-
-#define MIO_USB_RSTCTRL_XRST	(0x1 << 0)
-
-#endif /* ARCH_MIO_REGS_H */
diff --git a/arch/arm/mach-uniphier/init_page_table.S b/arch/arm/mach-uniphier/init_page_table.S
deleted file mode 100644
index 2d3ad15c6e..0000000000
--- a/arch/arm/mach-uniphier/init_page_table.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <linux/linkage.h>
-
-/* page table */
-#define NR_SECTIONS	4096
-#define SECTION_SHIFT	20
-#define DEVICE	0x00002002 /* Non-shareable Device */
-#define NORMAL	0x0000000e /* Normal Memory Write-Back, No Write-Allocate */
-
-#define TEXT_SECTION	((CONFIG_SPL_TEXT_BASE) >> (SECTION_SHIFT))
-#define STACK_SECTION	((CONFIG_SPL_STACK) >> (SECTION_SHIFT))
-
-	.section ".rodata"
-	.align 14
-ENTRY(init_page_table)
-	section = 0
-	.rept NR_SECTIONS
-	.if section == 0 || section == 1 || section == STACK_SECTION
-	attr = NORMAL
-	.else
-	attr = DEVICE
-	.endif
-	.word (section << SECTION_SHIFT) | attr
-	section = section + 1
-	.endr
-END(init_page_table)
diff --git a/arch/arm/mach-uniphier/lowlevel_init.S b/arch/arm/mach-uniphier/lowlevel_init.S
index 291337070e..dd03ad8143 100644
--- a/arch/arm/mach-uniphier/lowlevel_init.S
+++ b/arch/arm/mach-uniphier/lowlevel_init.S
@@ -29,12 +29,16 @@ ENTRY(lowlevel_init)
 	bl	debug_ll_init
 #endif
 
+	bl	setup_init_ram		@ RAM area for stack and page talbe
+
 	/*
 	 * Now we are using the page table embedded in the Boot ROM.
 	 * It is not handy since it is not a straight mapped table for sLD3.
-	 * What we need to do next is to switch over to the page table in SPL.
+	 * Also, the access to the external bus is prohibited.  What we need
+	 * to do next is to create a page table and switch over to it.
 	 */
-	ldr	r3, =init_page_table	@ page table must be 16KB aligned
+	bl	create_page_table
+	bl	v7_flush_dcache_all
 
 	/* Disable MMU and Dcache before switching Page Table */
 	mrc	p15, 0, r0, c1, c0, 0	@ SCTLR (System Control Register)
@@ -43,8 +47,6 @@ ENTRY(lowlevel_init)
 
 	bl	enable_mmu
 
-	bl	setup_init_ram		@ RAM area for temporary stack pointer
-
 	mov	lr, r8			@ restore link
 	mov	pc, lr			@ back to my caller
 ENDPROC(lowlevel_init)
@@ -55,7 +57,7 @@ ENTRY(enable_mmu)
 	orr	r0, r0, #0x20		@ disable TTBR1
 	mcr	p15, 0, r0, c2, c0, 2
 
-	orr	r0, r3, #0x8		@ Outer Cacheability for table walks: WBWA
+	orr	r0, r12, #0x8		@ Outer Cacheability for table walks: WBWA
 	mcr	p15, 0, r0, c2, c0, 0   @ TTBR0
 
 	mov	r0, #0
@@ -82,8 +84,9 @@ ENDPROC(enable_mmu)
  * For PH1-Pro4 or older SoCs, the size of WAY is 32KB.
  * It is large enough for tmp RAM.
  */
-#define BOOT_RAM_SIZE    (SZ_32K)
-#define BOOT_WAY_BITS    (0x00000100)   /* way 8 */
+#define BOOT_RAM_SIZE	(SZ_32K)
+#define BOOT_RAM_BASE	((CONFIG_SPL_STACK) - (BOOT_RAM_SIZE))
+#define BOOT_WAY_BITS	(0x00000100)   /* way 8 */
 
 ENTRY(setup_init_ram)
 	/*
@@ -96,7 +99,7 @@ ENTRY(setup_init_ram)
 	ldr	r0, = 0x00408006	@ touch to zero with address range
 	ldr	r1, = SSCOQM
 	str	r0, [r1]
-	ldr	r0, = (CONFIG_SPL_STACK - BOOT_RAM_SIZE)	@ base address
+	ldr	r0, = BOOT_RAM_BASE
 	ldr	r1, = SSCOQAD
 	str	r0, [r1]
 	ldr	r0, = BOOT_RAM_SIZE
@@ -119,3 +122,86 @@ ENTRY(setup_init_ram)
 
 	mov	pc, lr
 ENDPROC(setup_init_ram)
+
+#define DEVICE	0x00002002 /* Non-shareable Device */
+#define NORMAL	0x0000000e /* Normal Memory Write-Back, No Write-Allocate */
+
+ENTRY(create_page_table)
+	ldr	r0, = DEVICE
+	ldr	r1, = BOOT_RAM_BASE
+	mov	r12, r1			@ r12 is preserved during D-cache flush
+0:	str	r0, [r1], #4		@ specify all the sections as Device
+	adds	r0, r0, #0x00100000
+	bcc	0b
+
+	ldr	r0, = NORMAL
+	str	r0, [r12]		@ mark the first section as Normal
+	add	r0, r0, #0x00100000
+	str	r0, [r12, #4]		@ mark the second section as Normal
+	mov	pc, lr
+ENDPROC(create_page_table)
+
+/* We don't use Thumb instructions for now */
+#define ARM(x...)	x
+#define THUMB(x...)
+
+/*
+ *	v7_flush_dcache_all()
+ *
+ *	Flush the whole D-cache.
+ *
+ *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
+ *
+ *	- mm    - mm_struct describing address space
+ *
+ *	Note: copied from arch/arm/mm/cache-v7.S of Linux 4.4
+ */
+ENTRY(v7_flush_dcache_all)
+	dmb					@ ensure ordering with previous memory accesses
+	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
+	mov	r3, r0, lsr #23			@ move LoC into position
+	ands	r3, r3, #7 << 1			@ extract LoC*2 from clidr
+	beq	finished			@ if loc is 0, then no need to clean
+start_flush_levels:
+	mov	r10, #0				@ start clean at cache level 0
+flush_levels:
+	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
+	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
+	and	r1, r1, #7			@ mask of the bits for current cache only
+	cmp	r1, #2				@ see what cache we have at this level
+	blt	skip				@ skip if no cache, or just i-cache
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	isb					@ isb to sych the new cssr&csidr
+	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
+	and	r2, r1, #7			@ extract the length of the cache lines
+	add	r2, r2, #4			@ add 4 (line length offset)
+	movw	r4, #0x3ff
+	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
+	clz	r5, r4				@ find bit position of way size increment
+	movw	r7, #0x7fff
+	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
+loop1:
+	mov	r9, r7				@ create working copy of max index
+loop2:
+ ARM(	orr	r11, r10, r4, lsl r5	)	@ factor way and cache number into r11
+ THUMB(	lsl	r6, r4, r5		)
+ THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
+ ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
+ THUMB(	lsl	r6, r9, r2		)
+ THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
+	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
+	subs	r9, r9, #1			@ decrement the index
+	bge	loop2
+	subs	r4, r4, #1			@ decrement the way
+	bge	loop1
+skip:
+	add	r10, r10, #2			@ increment cache number
+	cmp	r3, r10
+	bgt	flush_levels
+finished:
+	mov	r10, #0				@ swith back to cache level 0
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	dsb	st
+	isb
+	mov	pc, lr
+ENDPROC(v7_flush_dcache_all)
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c
index 8168a63d31..2fe2c7fc80 100644
--- a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c
@@ -35,15 +35,6 @@ void ph1_ld4_pin_init(void)
 	sg_set_pinsel(31, 0, 8, 4);	/* MMCDAT7 -> NFD7_GB */
 #endif
 
-#ifdef CONFIG_USB_EHCI_UNIPHIER
-	sg_set_pinsel(53, 0, 8, 4);	/* USB0VBUS -> USB0VBUS */
-	sg_set_pinsel(54, 0, 8, 4);	/* USB0OD   -> USB0OD */
-	sg_set_pinsel(55, 0, 8, 4);	/* USB1VBUS -> USB1VBUS */
-	sg_set_pinsel(56, 0, 8, 4);	/* USB1OD   -> USB1OD */
-	/* sg_set_pinsel(67, 23, 8, 4); */ /* PCOE -> USB2VBUS */
-	/* sg_set_pinsel(68, 23, 8, 4); */ /* PCWAIT -> USB2OD */
-#endif
-
 	tmp = readl(SG_IECTRL);
 	tmp |= 0x41;
 	writel(tmp, SG_IECTRL);
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c
index 23b5f9349a..b08ca1ef31 100644
--- a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c
@@ -40,12 +40,5 @@ void ph1_pro4_pin_init(void)
 	sg_set_pinsel(183, 0, 4, 8);	/* USB1OD   -> USB1OD */
 #endif
 
-#ifdef CONFIG_USB_EHCI_UNIPHIER
-	sg_set_pinsel(184, 0, 4, 8);	/* USB2VBUS -> USB2VBUS */
-	sg_set_pinsel(185, 0, 4, 8);	/* USB2OD   -> USB2OD */
-	sg_set_pinsel(187, 0, 4, 8);	/* USB3VBUS -> USB3VBUS */
-	sg_set_pinsel(188, 0, 4, 8);	/* USB3OD   -> USB3OD */
-#endif
-
 	writel(1, SG_LOADPINCTRL);
 }
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c
index 6fc0dee70e..367d9f3bbc 100644
--- a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c
@@ -9,7 +9,7 @@
 
 void ph1_sld3_pin_init(void)
 {
-#ifdef CONFIG_USB_EHCI_UNIPHIER
+#ifdef CONFIG_USB_EHCI
 	sg_set_pinsel(13, 0, 4, 4);	/* USB0OC */
 	sg_set_pinsel(14, 1, 4, 4);	/* USB0VBUS */
 
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c
index a4e3e7a614..f3fae1d7c6 100644
--- a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c
@@ -32,13 +32,4 @@ void ph1_sld8_pin_init(void)
 	sg_set_pinsel(30, 0, 8, 4);	/* NFD6_GB -> NFD6_GB */
 	sg_set_pinsel(31, 0, 8, 4);	/* NFD7_GB -> NFD7_GB */
 #endif
-
-#ifdef CONFIG_USB_EHCI_UNIPHIER
-	sg_set_pinsel(41, 0, 8, 4);	/* USB0VBUS -> USB0VBUS */
-	sg_set_pinsel(42, 0, 8, 4);	/* USB0OD   -> USB0OD */
-	sg_set_pinsel(43, 0, 8, 4);	/* USB1VBUS -> USB1VBUS */
-	sg_set_pinsel(44, 0, 8, 4);	/* USB1OD   -> USB1OD */
-	/* sg_set_pinsel(114, 1, 8, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */
-	/* sg_set_pinsel(115, 1, 8, 4); */ /* RXD1 -> USB2OD */
-#endif
 }
diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig
index ee3cbadf29..535f96fb63 100644
--- a/configs/uniphier_ld4_sld8_defconfig
+++ b/configs/uniphier_ld4_sld8_defconfig
@@ -27,5 +27,7 @@ CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_UNIPHIER_SERIAL=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/uniphier_sld3_defconfig b/configs/uniphier_sld3_defconfig
index 4b871d0ebd..e369c45e82 100644
--- a/configs/uniphier_sld3_defconfig
+++ b/configs/uniphier_sld3_defconfig
@@ -22,5 +22,7 @@ CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
 CONFIG_SPL_NAND_DENALI=y
 CONFIG_UNIPHIER_SERIAL=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
 CONFIG_USB_STORAGE=y
diff --git a/doc/README.uniphier b/doc/README.uniphier
index bce70cf5fe..bcf0ac3d4b 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -68,8 +68,8 @@ Burn U-Boot images to NAND
 --------------------------
 
 Write two files to the NAND device as follows:
- - spl/u-boot-spl-dtb.bin at the offset address 0x00000000
- - u-boot-dtb.img         at the offset address 0x00010000
+ - spl/u-boot-spl.bin at the offset address 0x00000000
+ - u-boot.img         at the offset address 0x00010000
 
 If a TFTP server is available, the images can be easily updated.
 Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public
@@ -145,4 +145,4 @@ newer SoCs.  Even if it is, EA[25] is not connected on most of the boards.
 
 --
 Masahiro Yamada <yamada.masahiro@socionext.com>
-Aug. 2015
+Feb. 2016
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 9fcde39b71..a98b74bbc0 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -20,4 +20,6 @@ config SPL_CLK
 	  setting up clocks within SPL, and allows the same drivers to be
 	  used as U-Boot proper.
 
+source "drivers/clk/uniphier/Kconfig"
+
 endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index c9144e3e1d..c51db1562b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o
 obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
 obj-$(CONFIG_SANDBOX) += clk_sandbox.o
 obj-$(CONFIG_MACH_PIC32) += clk_pic32.o
+obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
diff --git a/drivers/clk/uniphier/Kconfig b/drivers/clk/uniphier/Kconfig
new file mode 100644
index 0000000000..0e90c01a9a
--- /dev/null
+++ b/drivers/clk/uniphier/Kconfig
@@ -0,0 +1,13 @@
+config CLK_UNIPHIER
+	bool
+	select CLK
+	select SPL_CLK
+
+menu "Clock drivers for UniPhier SoCs"
+	depends on CLK_UNIPHIER
+
+config CLK_UNIPHIER_MIO
+	bool "Clock driver for UniPhier Media I/O block"
+	default y
+
+endmenu
diff --git a/drivers/clk/uniphier/Makefile b/drivers/clk/uniphier/Makefile
new file mode 100644
index 0000000000..a3168f9bc1
--- /dev/null
+++ b/drivers/clk/uniphier/Makefile
@@ -0,0 +1,3 @@
+obj-y					+= clk-uniphier-core.o
+
+obj-$(CONFIG_CLK_UNIPHIER_MIO)		+= clk-uniphier-mio.o
diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c
new file mode 100644
index 0000000000..e79e0ff689
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-core.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <mapmem.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <clk.h>
+#include <dm/device.h>
+
+#include "clk-uniphier.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int uniphier_clk_enable(struct udevice *dev, int index)
+{
+	struct uniphier_clk_priv *priv = dev_get_priv(dev);
+	struct uniphier_clk_gate_data *gate = priv->socdata->gate;
+	unsigned int nr_gate = priv->socdata->nr_gate;
+	void __iomem *reg;
+	u32 mask, data, tmp;
+	int i;
+
+	for (i = 0; i < nr_gate; i++) {
+		if (gate[i].index != index)
+			continue;
+
+		reg = priv->base + gate[i].reg;
+		mask = gate[i].mask;
+		data = gate[i].data & mask;
+
+		tmp = readl(reg);
+		tmp &= ~mask;
+		tmp |= data & mask;
+		debug("%s: %p: %08x\n", __func__, reg, tmp);
+		writel(tmp, reg);
+	}
+
+	return 0;
+}
+
+static ulong uniphier_clk_get_rate(struct udevice *dev, int index)
+{
+	struct uniphier_clk_priv *priv = dev_get_priv(dev);
+	struct uniphier_clk_rate_data *rdata = priv->socdata->rate;
+	unsigned int nr_rdata = priv->socdata->nr_rate;
+	void __iomem *reg;
+	u32 mask, data;
+	ulong matched_rate = 0;
+	int i;
+
+	for (i = 0; i < nr_rdata; i++) {
+		if (rdata[i].index != index)
+			continue;
+
+		if (rdata[i].reg == UNIPHIER_CLK_RATE_IS_FIXED)
+			return rdata[i].rate;
+
+		reg = priv->base + rdata[i].reg;
+		mask = rdata[i].mask;
+		data = rdata[i].data & mask;
+		if ((readl(reg) & mask) == data) {
+			if (matched_rate && rdata[i].rate != matched_rate) {
+				printf("failed to get clk rate for insane register values\n");
+				return -EINVAL;
+			}
+			matched_rate = rdata[i].rate;
+		}
+	}
+
+	debug("%s: rate = %lu\n", __func__, matched_rate);
+
+	return matched_rate;
+}
+
+static ulong uniphier_clk_set_rate(struct udevice *dev, int index, ulong rate)
+{
+	struct uniphier_clk_priv *priv = dev_get_priv(dev);
+	struct uniphier_clk_rate_data *rdata = priv->socdata->rate;
+	unsigned int nr_rdata = priv->socdata->nr_rate;
+	void __iomem *reg;
+	u32 mask, data, tmp;
+	ulong best_rate = 0;
+	int i;
+
+	/* first, decide the best match rate */
+	for (i = 0; i < nr_rdata; i++) {
+		if (rdata[i].index != index)
+			continue;
+
+		if (rdata[i].reg == UNIPHIER_CLK_RATE_IS_FIXED)
+			return 0;
+
+		if (rdata[i].rate > best_rate && rdata[i].rate <= rate)
+			best_rate = rdata[i].rate;
+	}
+
+	if (!best_rate)
+		return -ENODEV;
+
+	debug("%s: requested rate = %lu, set rate = %lu\n", __func__,
+	      rate, best_rate);
+
+	/* second, really set registers */
+	for (i = 0; i < nr_rdata; i++) {
+		if (rdata[i].index != index || rdata[i].rate != best_rate)
+			continue;
+
+		reg = priv->base + rdata[i].reg;
+		mask = rdata[i].mask;
+		data = rdata[i].data & mask;
+
+		tmp = readl(reg);
+		tmp &= ~mask;
+		tmp |= data;
+		debug("%s: %p: %08x\n", __func__, reg, tmp);
+		writel(tmp, reg);
+	}
+
+	return best_rate;
+}
+
+const struct clk_ops uniphier_clk_ops = {
+	.enable = uniphier_clk_enable,
+	.get_periph_rate = uniphier_clk_get_rate,
+	.set_periph_rate = uniphier_clk_set_rate,
+};
+
+int uniphier_clk_probe(struct udevice *dev)
+{
+	struct uniphier_clk_priv *priv = dev_get_priv(dev);
+	fdt_addr_t addr;
+	fdt_size_t size;
+
+	addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg",
+				    &size);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->base = map_sysmem(addr, size);
+	if (!priv->base)
+		return -ENOMEM;
+
+	priv->socdata = (void *)dev_get_driver_data(dev);
+
+	return 0;
+}
+
+int uniphier_clk_remove(struct udevice *dev)
+{
+	struct uniphier_clk_priv *priv = dev_get_priv(dev);
+
+	unmap_sysmem(priv->base);
+
+	return 0;
+}
diff --git a/drivers/clk/uniphier/clk-uniphier-mio.c b/drivers/clk/uniphier/clk-uniphier-mio.c
new file mode 100644
index 0000000000..d91ae34da1
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-mio.c
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <clk.h>
+#include <dm/device.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_MIO_CLK_GATE_SD(ch, idx)	\
+	{					\
+		.index = (idx),			\
+		.reg = 0x20 + 0x200 * (ch),	\
+		.mask = 0x00000100,		\
+		.data = 0x00000100,		\
+	},					\
+	{					\
+		.index = (idx),			\
+		.reg = 0x110 + 0x200 * (ch),	\
+		.mask = 0x00000001,		\
+		.data = 0x00000001,		\
+	}
+
+#define UNIPHIER_MIO_CLK_RATE_SD(ch, idx)	\
+	{					\
+		.index = (idx),			\
+		.reg = 0x30 + 0x200 * (ch),	\
+		.mask = 0x00031300,		\
+		.data = 0x00000000,		\
+		.rate = 44444444,		\
+	},					\
+	{					\
+		.index = (idx),			\
+		.reg = 0x30 + 0x200 * (ch),	\
+		.mask = 0x00031300,		\
+		.data = 0x00010000,		\
+		.rate = 33333333,		\
+	},					\
+	{					\
+		.index = (idx),			\
+		.reg = 0x30 + 0x200 * (ch),	\
+		.mask = 0x00031300,		\
+		.data = 0x00020000,		\
+		.rate = 50000000,		\
+	},					\
+	{					\
+		.index = (idx),			\
+		.reg = 0x30 + 0x200 * (ch),	\
+		.mask = 0x00031300,		\
+		.data = 0x00020000,		\
+		.rate = 66666666,		\
+	},					\
+	{					\
+		.index = (idx),			\
+		.reg = 0x30 + 0x200 * (ch),	\
+		.mask = 0x00031300,		\
+		.data = 0x00001000,		\
+		.rate = 100000000,		\
+	},					\
+	{					\
+		.index = (idx),			\
+		.reg = 0x30 + 0x200 * (ch),	\
+		.mask = 0x00031300,		\
+		.data = 0x00001100,		\
+		.rate = 40000000,		\
+	},					\
+	{					\
+		.index = (idx),			\
+		.reg = 0x30 + 0x200 * (ch),	\
+		.mask = 0x00031300,		\
+		.data = 0x00001200,		\
+		.rate = 25000000,		\
+	},					\
+	{					\
+		.index = (idx),			\
+		.reg = 0x30 + 0x200 * (ch),	\
+		.mask = 0x00031300,		\
+		.data = 0x00001300,		\
+		.rate = 22222222,		\
+	}
+
+#define UNIPHIER_MIO_CLK_GATE_USB(ch, idx)	\
+	{					\
+		.index = (idx),			\
+		.reg = 0x20 + 0x200 * (ch),	\
+		.mask = 0x30000000,		\
+		.data = 0x30000000,		\
+	},					\
+	{					\
+		.index = (idx),			\
+		.reg = 0x110 + 0x200 * (ch),	\
+		.mask = 0x01000000,		\
+		.data = 0x01000000,		\
+	},					\
+	{					\
+		.index = (idx),			\
+		.reg = 0x114 + 0x200 * (ch),	\
+		.mask = 0x00000001,		\
+		.data = 0x00000001,		\
+	}
+
+#define UNIPHIER_MIO_CLK_GATE_DMAC(idx)		\
+	{					\
+		.index = (idx),			\
+		.reg = 0x20,			\
+		.mask = 0x02000000,		\
+		.data = 0x02000000,		\
+	},					\
+	{					\
+		.index = (idx),			\
+		.reg = 0x110,			\
+		.mask = 0x00020000,		\
+		.data = 0x00020000,		\
+	}
+
+static struct uniphier_clk_gate_data uniphier_mio_clk_gate[] = {
+	UNIPHIER_MIO_CLK_GATE_SD(0, 0),
+	UNIPHIER_MIO_CLK_GATE_SD(1, 1),
+	UNIPHIER_MIO_CLK_GATE_SD(2, 2),		/* for PH1-Pro4 only */
+	UNIPHIER_MIO_CLK_GATE_USB(0, 3),
+	UNIPHIER_MIO_CLK_GATE_USB(1, 4),
+	UNIPHIER_MIO_CLK_GATE_USB(2, 5),
+	UNIPHIER_MIO_CLK_GATE_DMAC(6),
+	UNIPHIER_MIO_CLK_GATE_USB(3, 7),	/* for PH1-sLD3 only */
+};
+
+static struct uniphier_clk_rate_data uniphier_mio_clk_rate[] = {
+	UNIPHIER_MIO_CLK_RATE_SD(0, 0),
+	UNIPHIER_MIO_CLK_RATE_SD(1, 1),
+	UNIPHIER_MIO_CLK_RATE_SD(2, 2),		/* for PH1-Pro4 only */
+};
+
+static struct uniphier_clk_soc_data uniphier_mio_clk_data = {
+	.gate = uniphier_mio_clk_gate,
+	.nr_gate = ARRAY_SIZE(uniphier_mio_clk_gate),
+	.rate = uniphier_mio_clk_rate,
+	.nr_rate = ARRAY_SIZE(uniphier_mio_clk_rate),
+};
+
+static const struct udevice_id uniphier_mio_clk_match[] = {
+	{
+		.compatible = "socionext,ph1-sld3-mioctrl",
+		.data = (ulong)&uniphier_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,ph1-ld4-mioctrl",
+		.data = (ulong)&uniphier_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,ph1-pro4-mioctrl",
+		.data = (ulong)&uniphier_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,ph1-sld8-mioctrl",
+		.data = (ulong)&uniphier_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,ph1-pro5-mioctrl",
+		.data = (ulong)&uniphier_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,proxstream2-mioctrl",
+		.data = (ulong)&uniphier_mio_clk_data,
+	},
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(uniphier_mio_clk) = {
+	.name = "uniphier-mio-clk",
+	.id = UCLASS_CLK,
+	.of_match = uniphier_mio_clk_match,
+	.probe = uniphier_clk_probe,
+	.remove = uniphier_clk_remove,
+	.priv_auto_alloc_size = sizeof(struct uniphier_clk_priv),
+	.ops = &uniphier_clk_ops,
+};
diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h
new file mode 100644
index 0000000000..560b3f8112
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CLK_UNIPHIER_H__
+#define __CLK_UNIPHIER_H__
+
+#include <linux/kernel.h>
+
+struct uniphier_clk_gate_data {
+	int index;
+	unsigned int reg;
+	u32 mask;
+	u32 data;
+};
+
+struct uniphier_clk_rate_data {
+	int index;
+	unsigned int reg;
+#define UNIPHIER_CLK_RATE_IS_FIXED		UINT_MAX
+	u32 mask;
+	u32 data;
+	unsigned long rate;
+};
+
+struct uniphier_clk_soc_data {
+	struct uniphier_clk_gate_data *gate;
+	unsigned int nr_gate;
+	struct uniphier_clk_rate_data *rate;
+	unsigned int nr_rate;
+};
+
+#define UNIPHIER_CLK_FIXED_RATE(i, f)			\
+	{						\
+		.index = i,				\
+		.reg = UNIPHIER_CLK_RATE_IS_FIXED,	\
+		.rate = f,				\
+	}
+
+/**
+ * struct uniphier_clk_priv - private data for UniPhier clock driver
+ *
+ * @base: base address of the clock provider
+ * @socdata: SoC specific data
+ */
+struct uniphier_clk_priv {
+	void __iomem *base;
+	struct uniphier_clk_soc_data *socdata;
+};
+
+extern const struct clk_ops uniphier_clk_ops;
+int uniphier_clk_probe(struct udevice *dev);
+int uniphier_clk_remove(struct udevice *dev);
+
+#endif /* __CLK_UNIPHIER_H__ */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 39f7185e86..9332374193 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -74,13 +74,6 @@ config USB_EHCI_MX6
 	---help---
 	  Enables support for the on-chip EHCI controller on i.MX6 SoCs.
 
-config USB_EHCI_UNIPHIER
-	bool "Support for UniPhier on-chip EHCI USB controller"
-	depends on ARCH_UNIPHIER && OF_CONTROL
-	default y
-	---help---
-	  Enables support for the on-chip EHCI controller on UniPhier SoCs.
-
 config USB_EHCI_GENERIC
 	bool "Support for generic EHCI USB controller"
 	depends on OF_CONTROL
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 6183b80c75..9a87d2bf62 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -47,7 +47,6 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
 obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
 obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o
 obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
-obj-$(CONFIG_USB_EHCI_UNIPHIER) += ehci-uniphier.o
 obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o
 obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
diff --git a/drivers/usb/host/ehci-uniphier.c b/drivers/usb/host/ehci-uniphier.c
deleted file mode 100644
index c3f827ca0a..0000000000
--- a/drivers/usb/host/ehci-uniphier.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <usb.h>
-#include <mach/mio-regs.h>
-#include <fdtdec.h>
-#include "ehci.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define FDT		gd->fdt_blob
-#define COMPAT		"socionext,uniphier-ehci"
-
-static int get_uniphier_ehci_base(int index, struct ehci_hccr **base)
-{
-	int offset;
-
-	for (offset = fdt_node_offset_by_compatible(FDT, 0, COMPAT);
-	     offset >= 0;
-	     offset = fdt_node_offset_by_compatible(FDT, offset, COMPAT)) {
-		if (index == 0) {
-			*base = (struct ehci_hccr *)
-					fdtdec_get_addr(FDT, offset, "reg");
-			return 0;
-		}
-		index--;
-	}
-
-	return -ENODEV; /* not found */
-}
-
-static void uniphier_ehci_reset(int index, int on)
-{
-	u32 tmp;
-
-	tmp = readl(MIO_USB_RSTCTRL(index));
-	if (on)
-		tmp &= ~MIO_USB_RSTCTRL_XRST;
-	else
-		tmp |= MIO_USB_RSTCTRL_XRST;
-	writel(tmp, MIO_USB_RSTCTRL(index));
-}
-
-int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
-		  struct ehci_hcor **hcor)
-{
-	int ret;
-	struct ehci_hccr *cr;
-	struct ehci_hcor *or;
-
-	uniphier_ehci_reset(index, 0);
-
-	ret = get_uniphier_ehci_base(index, &cr);
-	if (ret < 0)
-		return ret;
-	or = (void *)cr + HC_LENGTH(ehci_readl(&cr->cr_capbase));
-
-	*hccr = cr;
-	*hcor = or;
-
-	return 0;
-}
-
-int ehci_hcd_stop(int index)
-{
-	uniphier_ehci_reset(index, 1);
-
-	return 0;
-}
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index bf89a0e070..fcec0c0ae2 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -173,7 +173,7 @@
 	"setenv bootargs $bootargs root=/dev/nfs rw "			\
 	"nfsroot=$serverip:$rootpath "					\
 	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
-	"tftpboot; bootm;"
+		"run __nfsboot"
 
 #ifdef CONFIG_FIT
 #define CONFIG_BOOTFILE			"fitImage"
@@ -186,7 +186,8 @@
 	"nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
 		"bootm $fit_addr_r\0" \
 	"tftpboot=tftpboot $fit_addr_r $bootfile &&" \
-		"bootm $fit_addr_r\0"
+		"bootm $fit_addr_r\0" \
+	"__nfsboot=run tftpboot\0"
 #else
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_BOOTFILE			"zImage"
@@ -201,31 +202,36 @@
 	"ramdisk_addr_r=0x84a00000\0" \
 	"ramdisk_size=0x00600000\0" \
 	"ramdisk_file=rootfs.cpio.uboot\0" \
-	"norboot=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
-		"setexpr kernel_addr $nor_base + $kernel_addr &&" \
-		"setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \
-		"setexpr fdt_addr $nor_base + $fdt_addr &&" \
-		"bootz $kernel_addr $ramdisk_addr $fdt_addr\0" \
-	"nandboot=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
-		"nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
+	"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
+		"bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
+	"norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
+		"cp.b $kernel_addr $kernel_addr_r $kernel_size &&" \
+		"setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
+		"setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
+		"run boot_common\0" \
+	"nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
 		"nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
 		"nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
-		"bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
-	"tftpboot=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
-		"tftpboot $kernel_addr_r $bootfile &&" \
+		"run boot_common\0" \
+	"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 		"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 		"tftpboot $fdt_addr_r $fdt_file &&" \
-		"bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0"
+		"run boot_common\0" \
+	"__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
+		"tftpboot $fdt_addr_r $fdt_file &&" \
+		"tftpboot $fdt_addr_r $fdt_file &&" \
+		"setenv ramdisk_addr_r - &&" \
+		"run boot_common\0"
 #endif
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"netdev=eth0\0"						\
 	"verify=n\0"						\
-	"norbase=0x42000000\0"					\
+	"nor_base=0x42000000\0"					\
 	"nandupdate=nand erase 0 0x00100000 &&"			\
-		"tftpboot u-boot-spl-dtb.bin &&"		\
+		"tftpboot u-boot-spl.bin &&"			\
 		"nand write $loadaddr 0 0x00010000 &&"		\
-		"tftpboot u-boot-dtb.img &&"			\
+		"tftpboot u-boot.img &&"			\
 		"nand write $loadaddr 0x00010000 0x000f0000\0"	\
 	LINUXBOOT_ENV_SETTINGS
 
@@ -245,7 +251,7 @@
 #define CONFIG_SPL_TEXT_BASE		0x00100000
 #endif
 
-#define CONFIG_SPL_STACK		(0x0ff08000)
+#define CONFIG_SPL_STACK		(0x00100000)
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE)
 
 #define CONFIG_PANIC_HANG