summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2015-08-06 14:43:13 +0200
committerLuka Perkov <luka.perkov@sartura.hr>2015-08-17 18:49:33 +0200
commit0ceb2dae788848ad6df9fb1cc0e20e632f380887 (patch)
tree0c760046fefc20f5c17e721e6906d52a7be9d9f2
parenta8b57a90ec65832ca069ed1b0900cf92e9efd6a0 (diff)
arm: mvebu: Add complete SDRAM ECC scrubbing
This patch introduces the SDRAM scrubbing for ECC enabled board to fill/initialize the ECC bytes. This is done via the XOR engine to speed up the process. The scrubbing is a 2-stage process: 1) SPL scrubs the area 0 - 0x100.0000 (16MiB) for the main U-Boot 2) U-Boot scrubs the remaining SDRAM area(s) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
-rw-r--r--arch/arm/mach-mvebu/Makefile4
-rw-r--r--arch/arm/mach-mvebu/dram.c141
-rw-r--r--drivers/ddr/marvell/axp/xor.c3
-rw-r--r--drivers/ddr/marvell/axp/xor.h1
4 files changed, 141 insertions, 8 deletions
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 446ce04109..21c56a4d96 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -14,6 +14,10 @@ else
obj-y = cpu.o
obj-y += dram.o
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ../../../drivers/ddr/marvell/a38x/xor.o
+obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ../../../drivers/ddr/marvell/axp/xor.o
+endif
obj-y += gpio.o
obj-y += mbus.o
obj-y += timer.o
diff --git a/arch/arm/mach-mvebu/dram.c b/arch/arm/mach-mvebu/dram.c
index a75ada3046..ddc5b7ee3e 100644
--- a/arch/arm/mach-mvebu/dram.c
+++ b/arch/arm/mach-mvebu/dram.c
@@ -13,10 +13,12 @@
#include <asm/arch/soc.h>
#ifdef CONFIG_SYS_MVEBU_DDR_A38X
-#include "../../../drivers/ddr/marvell/a38x/ddr3_init.h"
+#include "../../../drivers/ddr/marvell/axp/xor.h"
+#include "../../../drivers/ddr/marvell/axp/xor_regs.h"
#endif
#ifdef CONFIG_SYS_MVEBU_DDR_AXP
-#include "../../../drivers/ddr/marvell/axp/ddr3_init.h"
+#include "../../../drivers/ddr/marvell/axp/xor.h"
+#include "../../../drivers/ddr/marvell/axp/xor_regs.h"
#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -37,6 +39,14 @@ struct sdram_addr_dec {
#define SDRAM_SIZE_MAX 0xc0000000
+#define SCRUB_MAGIC 0xbeefdead
+
+#define SCRB_XOR_UNIT 0
+#define SCRB_XOR_CHAN 1
+#define SCRB_XOR_WIN 0
+
+#define XEBARX_BASE_OFFS 16
+
/*
* mvebu_sdram_bar - reads SDRAM Base Address Register
*/
@@ -102,6 +112,124 @@ void mvebu_sdram_size_adjust(enum memory_bank bank)
mvebu_sdram_bs_set(bank, size);
}
+#if defined(CONFIG_SYS_MVEBU_DDR_A38X) || defined(CONFIG_SYS_MVEBU_DDR_AXP)
+static u32 xor_ctrl_save;
+static u32 xor_base_save;
+static u32 xor_mask_save;
+
+static void mv_xor_init2(u32 cs)
+{
+ u32 reg, base, size, base2;
+ u32 bank_attr[4] = { 0xe00, 0xd00, 0xb00, 0x700 };
+
+ xor_ctrl_save = reg_read(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT,
+ SCRB_XOR_CHAN));
+ xor_base_save = reg_read(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT,
+ SCRB_XOR_WIN));
+ xor_mask_save = reg_read(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT,
+ SCRB_XOR_WIN));
+
+ /* Enable Window x for each CS */
+ reg = 0x1;
+ reg |= (0x3 << 16);
+ reg_write(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT, SCRB_XOR_CHAN), reg);
+
+ base = 0;
+ size = mvebu_sdram_bs(cs) - 1;
+ if (size) {
+ base2 = ((base / (64 << 10)) << XEBARX_BASE_OFFS) |
+ bank_attr[cs];
+ reg_write(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
+ base2);
+
+ base += size + 1;
+ size = (size / (64 << 10)) << 16;
+ /* Window x - size - 256 MB */
+ reg_write(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN), size);
+ }
+
+ mv_xor_hal_init(0);
+
+ return;
+}
+
+static void mv_xor_finish2(void)
+{
+ reg_write(XOR_WINDOW_CTRL_REG(SCRB_XOR_UNIT, SCRB_XOR_CHAN),
+ xor_ctrl_save);
+ reg_write(XOR_BASE_ADDR_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
+ xor_base_save);
+ reg_write(XOR_SIZE_MASK_REG(SCRB_XOR_UNIT, SCRB_XOR_WIN),
+ xor_mask_save);
+}
+
+static void dram_ecc_scrubbing(void)
+{
+ int cs;
+ u32 size, temp;
+ u32 total_mem = 0;
+ u64 total;
+ u32 start_addr;
+
+ /*
+ * The DDR training code from the bin_hdr / SPL already
+ * scrubbed the DDR till 0x1000000. And the main U-Boot
+ * is loaded to an address < 0x1000000. So we need to
+ * skip this range to not re-scrub this area again.
+ */
+ temp = reg_read(REG_SDRAM_CONFIG_ADDR);
+ temp |= (1 << REG_SDRAM_CONFIG_IERR_OFFS);
+ reg_write(REG_SDRAM_CONFIG_ADDR, temp);
+
+ for (cs = 0; cs < CONFIG_NR_DRAM_BANKS; cs++) {
+ size = mvebu_sdram_bs(cs) - 1;
+ if (size == 0)
+ continue;
+
+ total = (u64)size + 1;
+ total_mem += (u32)(total / (1 << 30));
+ start_addr = 0;
+ mv_xor_init2(cs);
+
+ /* Skip first 16 MiB */
+ if (0 == cs) {
+ start_addr = 0x1000000;
+ size -= start_addr;
+ }
+
+ mv_xor_mem_init(SCRB_XOR_CHAN, start_addr, size,
+ SCRUB_MAGIC, SCRUB_MAGIC);
+
+ /* Wait for previous transfer completion */
+ while (mv_xor_state_get(SCRB_XOR_CHAN) != MV_IDLE)
+ ;
+
+ mv_xor_finish2();
+ }
+
+ temp = reg_read(REG_SDRAM_CONFIG_ADDR);
+ temp &= ~(1 << REG_SDRAM_CONFIG_IERR_OFFS);
+ reg_write(REG_SDRAM_CONFIG_ADDR, temp);
+}
+
+static int ecc_enabled(void)
+{
+ if (reg_read(REG_SDRAM_CONFIG_ADDR) & (1 << REG_SDRAM_CONFIG_ECC_OFFS))
+ return 1;
+
+ return 0;
+}
+#else
+static void dram_ecc_scrubbing(void)
+{
+}
+
+static int ecc_enabled(void)
+{
+ return 0;
+}
+#endif
+
int dram_init(void)
{
u64 size = 0;
@@ -135,6 +263,10 @@ int dram_init(void)
gd->bd->bi_dram[i].size = 0;
}
+
+ if (ecc_enabled())
+ dram_ecc_scrubbing();
+
gd->ram_size = size;
return 0;
@@ -162,10 +294,7 @@ void dram_init_banksize(void)
void board_add_ram_info(int use_default)
{
- u32 reg;
-
- reg = reg_read(REG_SDRAM_CONFIG_ADDR);
- if (reg & (1 << REG_SDRAM_CONFIG_ECC_OFFS))
+ if (ecc_enabled())
printf(" (ECC");
else
printf(" (ECC not");
diff --git a/drivers/ddr/marvell/axp/xor.c b/drivers/ddr/marvell/axp/xor.c
index 66c96aef4e..54924cac3c 100644
--- a/drivers/ddr/marvell/axp/xor.c
+++ b/drivers/ddr/marvell/axp/xor.c
@@ -18,7 +18,6 @@ static u32 xor_regs_ctrl_backup;
static u32 xor_regs_base_backup[MAX_CS];
static u32 xor_regs_mask_backup[MAX_CS];
-static void mv_xor_hal_init(u32 chan_num);
static int mv_xor_cmd_set(u32 chan, int command);
static int mv_xor_ctrl_set(u32 chan, u32 xor_ctrl);
@@ -110,7 +109,7 @@ void mv_sys_xor_finish(void)
* RETURN:
* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
*/
-static void mv_xor_hal_init(u32 chan_num)
+void mv_xor_hal_init(u32 chan_num)
{
u32 i;
diff --git a/drivers/ddr/marvell/axp/xor.h b/drivers/ddr/marvell/axp/xor.h
index 353648758a..3ff784d7a9 100644
--- a/drivers/ddr/marvell/axp/xor.h
+++ b/drivers/ddr/marvell/axp/xor.h
@@ -60,6 +60,7 @@ struct crc_dma_desc {
u32 src_addr1; /* Mode: Source Block address pointer */
} __packed;
+void mv_xor_hal_init(u32 chan_num);
int mv_xor_state_get(u32 chan);
void mv_sys_xor_init(MV_DRAM_INFO *dram_info);
void mv_sys_xor_finish(void);