diff options
| author | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2015-10-14 10:46:36 +0200 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2015-10-14 10:46:36 +0200 |
| commit | 13a3972585af60ec367d209cedbd3601e0c77467 (patch) | |
| tree | 4b3312669b3e501f6bc10b39d8c7bbf516f07aac | |
| parent | 208bd51396fb606dbdcf45b064e6b372d7dd3e81 (diff) | |
| parent | 297faccca2235e359012118495b9b73451d54bb9 (diff) | |
Merge remote-tracking branch 'u-boot/master'
1324 files changed, 29224 insertions, 39273 deletions
@@ -146,7 +146,7 @@ config FIT Flattened Image Tree. FIT is formally a FDT, which can include images of various types (kernel, FDT blob, ramdisk, etc.) in a single blob. To boot this new uImage structure, - pass the the address of the blob to the "bootm" command. + pass the address of the blob to the "bootm" command. config FIT_VERBOSE bool "Display verbose messages on FIT boot" @@ -1,7 +1,7 @@ VERSION = 2015 PATCHLEVEL = 10 SUBLEVEL = -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc5 NAME = # *DOCUMENTATION* @@ -681,8 +681,10 @@ The following options need to be configured: CONFIG_ARM_ERRATA_742230 CONFIG_ARM_ERRATA_743622 CONFIG_ARM_ERRATA_751472 - CONFIG_ARM_ERRATA_794072 CONFIG_ARM_ERRATA_761320 + CONFIG_ARM_ERRATA_773022 + CONFIG_ARM_ERRATA_774769 + CONFIG_ARM_ERRATA_794072 If set, the workarounds for these ARM errata are applied early during U-Boot startup. Note that these options force the @@ -840,18 +842,6 @@ The following options need to be configured: define this to a list of base addresses for each (supported) port. See e.g. include/configs/versatile.h - CONFIG_PL011_SERIAL_RLCR - - Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500) - have separate receive and transmit line control registers. Set - this variable to initialize the extra register. - - CONFIG_PL011_SERIAL_FLUSH_ON_INIT - - On some platforms (e.g. U8500) U-Boot is loaded by a second stage - boot loader that has already initialized the UART. Define this - variable to flush the UART at init time. - CONFIG_SERIAL_HW_FLOW_CONTROL Define this variable to enable hw flow control in serial driver. @@ -2371,16 +2361,20 @@ CBFS (Coreboot Filesystem) support - drivers/i2c/i2c_mxc.c - activate this driver with CONFIG_SYS_I2C_MXC + - enable bus 1 with CONFIG_SYS_I2C_MXC_I2C1 + - enable bus 2 with CONFIG_SYS_I2C_MXC_I2C2 + - enable bus 3 with CONFIG_SYS_I2C_MXC_I2C3 + - enable bus 4 with CONFIG_SYS_I2C_MXC_I2C4 - define speed for bus 1 with CONFIG_SYS_MXC_I2C1_SPEED - define slave for bus 1 with CONFIG_SYS_MXC_I2C1_SLAVE - define speed for bus 2 with CONFIG_SYS_MXC_I2C2_SPEED - define slave for bus 2 with CONFIG_SYS_MXC_I2C2_SLAVE - define speed for bus 3 with CONFIG_SYS_MXC_I2C3_SPEED - define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE + - define speed for bus 4 with CONFIG_SYS_MXC_I2C4_SPEED + - define slave for bus 4 with CONFIG_SYS_MXC_I2C4_SLAVE If those defines are not set, default value is 100000 for speed, and 0 for slave. - - enable bus 3 with CONFIG_SYS_I2C_MXC_I2C3 - - enable bus 4 with CONFIG_SYS_I2C_MXC_I2C4 - drivers/i2c/rcar_i2c.c: - activate this driver with CONFIG_SYS_I2C_RCAR diff --git a/api/api_storage.c b/api/api_storage.c index b76b07d4c6..ec92ae48d1 100644 --- a/api/api_storage.c +++ b/api/api_storage.c @@ -112,6 +112,11 @@ static int dev_stor_get(int type, int first, int *more, struct device_info *di) else found = 1; + /* provide hint if there are more devices in + * this group to enumerate */ + if (1 < specs[type].max_dev) + *more = 1; + } else { for (i = 0; i < specs[type].max_dev; i++) if (di->cookie == (void *)get_dev(specs[type].name, i)) { diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8085a24de2..798135574a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -70,7 +70,7 @@ config SYS_L2CACHE_OFF choice prompt "Target select" - default ARCH_VERSATILE + default TARGET_HIKEY config ARCH_AT91 bool "Atmel AT91" @@ -79,10 +79,6 @@ config TARGET_EDB93XX bool "Support edb93xx" select CPU_ARM920T -config TARGET_SCB9328 - bool "Support scb9328" - select CPU_ARM920T - config TARGET_VCMA9 bool "Support VCMA9" select CPU_ARM920T @@ -138,11 +134,6 @@ config TARGET_MX25PDK bool "Support mx25pdk" select CPU_ARM926EJS -config TARGET_TX25 - bool "Support tx25" - select CPU_ARM926EJS - select SUPPORT_SPL - config TARGET_ZMX25 bool "Support zmx25" select CPU_ARM926EJS @@ -152,14 +143,6 @@ config TARGET_APF27 select CPU_ARM926EJS select SUPPORT_SPL -config TARGET_IMX27LITE - bool "Support imx27lite" - select CPU_ARM926EJS - -config TARGET_MAGNESIUM - bool "Support magnesium" - select CPU_ARM926EJS - config TARGET_APX4DEVKIT bool "Support apx4devkit" select CPU_ARM926EJS @@ -205,10 +188,6 @@ config TARGET_SC_SPS_1 select CPU_ARM926EJS select SUPPORT_SPL -config ARCH_NOMADIK - bool "ST-Ericsson Nomadik" - select CPU_ARM926EJS - config ORION5X bool "Marvell Orion" select CPU_ARM926EJS @@ -243,18 +222,10 @@ config TARGET_X600 select CPU_ARM926EJS select SUPPORT_SPL -config ARCH_VERSATILE - bool "ARM Ltd. Versatile family" - select CPU_ARM926EJS - config TARGET_IMX31_PHYCORE bool "Support imx31_phycore" select CPU_ARM1136 -config TARGET_QONG - bool "Support qong" - select CPU_ARM1136 - config TARGET_MX31ADS bool "Support mx31ads" select CPU_ARM1136 @@ -264,14 +235,6 @@ config TARGET_MX31PDK select CPU_ARM1136 select SUPPORT_SPL -config TARGET_TT01 - bool "Support tt01" - select CPU_ARM1136 - -config TARGET_IMX31_LITEKIT - bool "Support imx31_litekit" - select CPU_ARM1136 - config TARGET_WOODBURN bool "Support woodburn" select CPU_ARM1136 @@ -400,6 +363,13 @@ config TARGET_AM335X_EVM select DM_SERIAL select DM_GPIO +config TARGET_AM335X_SL50 + bool "Support am335x_sl50" + select CPU_V7 + select SUPPORT_SPL + select DM + select DM_SERIAL + config TARGET_AM43XX_EVM bool "Support am43xx_evm" select CPU_V7 @@ -472,6 +442,10 @@ config ARCH_KEYSTONE select CPU_V7 select SUPPORT_SPL +config ARCH_MX7 + bool "Freescale MX7" + select CPU_V7 + config ARCH_MX6 bool "Freescale MX6" select CPU_V7 @@ -485,10 +459,6 @@ config TARGET_M53EVK select CPU_V7 select SUPPORT_SPL -config TARGET_IMA3_MX53 - bool "Support ima3-mx53" - select CPU_V7 - config TARGET_MX51EVK bool "Support mx51evk" select CPU_V7 @@ -509,14 +479,6 @@ config TARGET_MX53SMD bool "Support mx53smd" select CPU_V7 -config TARGET_MX51_EFIKAMX - bool "Support mx51_efikamx" - select CPU_V7 - -config TARGET_VISION2 - bool "Support vision2" - select CPU_V7 - config OMAP34XX bool "OMAP34XX SoC" select CPU_V7 @@ -564,18 +526,10 @@ config ARCH_SUNXI select USB_STORAGE select USB_KEYBOARD -config TARGET_SNOWBALL - bool "Support snowball" - select CPU_V7 - config TARGET_TS4800 bool "Support TS4800" select CPU_V7 -config TARGET_U8500_HREF - bool "Support u8500_href" - select CPU_V7 - config TARGET_VF610TWR bool "Support vf610twr" select CPU_V7 @@ -584,6 +538,10 @@ config TARGET_COLIBRI_VF bool "Support Colibri VF50/61" select CPU_V7 +config TARGET_PCM052 + bool "Support pcm-052" + select CPU_V7 + config ARCH_ZYNQ bool "Xilinx Zynq Platform" select CPU_V7 @@ -609,6 +567,15 @@ config TARGET_VEXPRESS64_BASE_FVP select ARM64 select SEMIHOSTING +config TARGET_VEXPRESS64_BASE_FVP_DRAM + bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" + select ARM64 + help + This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides + the default config to allow the user to load the images directly into + DRAM using model parameters rather than by using semi-hosting to load + the files from the host filesystem. + config TARGET_VEXPRESS64_JUNO bool "Support Versatile Express Juno Development Platform" select ARM64 @@ -648,6 +615,9 @@ config TARGET_LS2085ARDB config TARGET_HIKEY bool "Support HiKey 96boards Consumer Edition Platform" select ARM64 + select DM + select DM_GPIO + select DM_SERIAL help Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. @@ -656,66 +626,19 @@ config TARGET_LS1021AQDS bool "Support ls1021aqds" select CPU_V7 select SUPPORT_SPL - config TARGET_LS1021ATWR bool "Support ls1021atwr" select CPU_V7 select SUPPORT_SPL -config TARGET_BALLOON3 - bool "Support balloon3" - select CPU_PXA - config TARGET_H2200 bool "Support h2200" select CPU_PXA -config TARGET_PALMLD - bool "Support palmld" - select CPU_PXA - -config TARGET_PALMTC - bool "Support palmtc" - select CPU_PXA - -config TARGET_PALMTREO680 - bool "Support palmtreo680" - select CPU_PXA - select SUPPORT_SPL - -config TARGET_PXA255_IDP - bool "Support pxa255_idp" - select CPU_PXA - -config TARGET_TRIZEPSIV - bool "Support trizepsiv" - select CPU_PXA - -config TARGET_VPAC270 - bool "Support vpac270" - select CPU_PXA - select SUPPORT_SPL - -config TARGET_XAENIAX - bool "Support xaeniax" - select CPU_PXA - -config TARGET_ZIPITZ2 - bool "Support zipitz2" - select CPU_PXA - -config TARGET_LP8X4X - bool "Support lp8x4x" - select CPU_PXA - config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA -config TARGET_JORNADA - bool "Support jornada" - select CPU_SA1100 - config ARCH_UNIPHIER bool "Socionext UniPhier SoCs" select CPU_V7 @@ -761,12 +684,12 @@ source "arch/arm/mach-keystone/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" +source "arch/arm/cpu/armv7/mx7/Kconfig" + source "arch/arm/cpu/armv7/mx6/Kconfig" source "arch/arm/cpu/armv7/mx5/Kconfig" -source "arch/arm/mach-nomadik/Kconfig" - source "arch/arm/cpu/armv7/omap3/Kconfig" source "arch/arm/cpu/armv7/omap4/Kconfig" @@ -787,8 +710,6 @@ source "arch/arm/mach-tegra/Kconfig" source "arch/arm/mach-uniphier/Kconfig" -source "arch/arm/mach-versatile/Kconfig" - source "arch/arm/mach-zynq/Kconfig" source "arch/arm/cpu/armv7/Kconfig" @@ -809,7 +730,6 @@ source "board/Marvell/gplugd/Kconfig" source "board/armadeus/apf27/Kconfig" source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" -source "board/balloon3/Kconfig" source "board/bluegiga/apx4devkit/Kconfig" source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" @@ -818,10 +738,8 @@ source "board/cirrus/edb93xx/Kconfig" source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_t43/Kconfig" source "board/creative/xfi3/Kconfig" -source "board/davedenx/qong/Kconfig" source "board/denx/m28evk/Kconfig" source "board/denx/m53evk/Kconfig" -source "board/esg/ima3-mx53/Kconfig" source "board/freescale/ls2085a/Kconfig" source "board/freescale/ls2085aqds/Kconfig" source "board/freescale/ls2085ardb/Kconfig" @@ -839,30 +757,19 @@ source "board/freescale/mx53evk/Kconfig" source "board/freescale/mx53loco/Kconfig" source "board/freescale/mx53smd/Kconfig" source "board/freescale/vf610twr/Kconfig" -source "board/genesi/mx51_efikamx/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" -source "board/hale/tt01/Kconfig" source "board/hisilicon/hikey/Kconfig" -source "board/icpdas/lp8x4x/Kconfig" source "board/imx31_phycore/Kconfig" source "board/isee/igep0033/Kconfig" -source "board/jornada/Kconfig" -source "board/karo/tx25/Kconfig" -source "board/logicpd/imx27lite/Kconfig" -source "board/logicpd/imx31_litekit/Kconfig" source "board/maxbcm/Kconfig" source "board/mpl/vcma9/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" -source "board/palmld/Kconfig" -source "board/palmtc/Kconfig" -source "board/palmtreo680/Kconfig" source "board/phytec/pcm051/Kconfig" +source "board/phytec/pcm052/Kconfig" source "board/ppcag/bg0900/Kconfig" -source "board/pxa255_idp/Kconfig" source "board/samsung/smdk2410/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" -source "board/scb9328/Kconfig" source "board/schulercontrol/sc_sps_1/Kconfig" source "board/siemens/draco/Kconfig" source "board/siemens/pxm2/Kconfig" @@ -873,12 +780,11 @@ source "board/spear/spear310/Kconfig" source "board/spear/spear320/Kconfig" source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" -source "board/st-ericsson/snowball/Kconfig" -source "board/st-ericsson/u8500/Kconfig" source "board/st/stm32f429-discovery/Kconfig" source "board/st/stv0991/Kconfig" source "board/sunxi/Kconfig" source "board/syteco/zmx25/Kconfig" +source "board/tcl/sl50/Kconfig" source "board/ti/am335x/Kconfig" source "board/ti/am43xx/Kconfig" source "board/birdland/bav335x/Kconfig" @@ -887,15 +793,10 @@ source "board/ti/ti816x/Kconfig" source "board/timll/devkit3250/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/toradex/colibri_vf/Kconfig" -source "board/trizepsiv/Kconfig" source "board/technologic/ts4800/Kconfig" -source "board/ttcontrol/vision2/Kconfig" -source "board/vpac270/Kconfig" source "board/vscom/baltos/Kconfig" source "board/woodburn/Kconfig" source "board/work-microwave/work_92105/Kconfig" -source "board/xaeniax/Kconfig" -source "board/zipitz2/Kconfig" source "arch/arm/Kconfig.debug" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1eca815c08..58f9bbb76c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -51,14 +51,12 @@ machine-$(CONFIG_ARCH_KEYSTONE) += keystone machine-$(CONFIG_KIRKWOOD) += kirkwood machine-$(CONFIG_ARMADA_XP) += mvebu # TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA -machine-$(CONFIG_ARCH_NOMADIK) += nomadik # TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X machine-$(CONFIG_ORION5X) += orion5x machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_TEGRA) += tegra machine-$(CONFIG_ARCH_UNIPHIER) += uniphier -machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_ZYNQ) += zynq machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) @@ -80,11 +78,11 @@ libs-y += arch/arm/cpu/ libs-y += arch/arm/lib/ ifeq ($(CONFIG_SPL_BUILD),y) -ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35)) +ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx7 mx31 mx35)) libs-y += arch/arm/imx-common/ endif else -ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610)) +ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx7 mx31 mx35 mxs vf610)) libs-y += arch/arm/imx-common/ endif endif diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/clk.c b/arch/arm/cpu/arm926ejs/lpc32xx/clk.c index 1ef8a36669..f5e2103426 100644 --- a/arch/arm/cpu/arm926ejs/lpc32xx/clk.c +++ b/arch/arm/cpu/arm926ejs/lpc32xx/clk.c @@ -54,12 +54,12 @@ unsigned int get_hclk_pll_rate(void) if (fref > 27000000ULL || fref < 1000000ULL) return 0; - fout = fref * m_div; - if (val & CLK_HCLK_PLL_FEEDBACK) { - fcco = fout; + fcco = fref * m_div; + fout = fcco; + if (val & CLK_HCLK_PLL_FEEDBACK) + fcco *= p_div; + else do_div(fout, p_div); - } else - fcco = fout * p_div; if (fcco > 320000000ULL || fcco < 156000000ULL) return 0; diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c index d9fa2807d7..b1c3f8f4ad 100644 --- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c +++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c @@ -44,8 +44,7 @@ void lpc32xx_uart_init(unsigned int uart_id) void lpc32xx_dma_init(void) { /* Enable DMA interface */ - writel(DMA_CLK_ENABLE, &clk->dmaclk_ctrl); - + writel(CLK_DMA_ENABLE, &clk->dmaclk_ctrl); } void lpc32xx_mac_init(void) diff --git a/arch/arm/cpu/arm926ejs/spear/cpu.c b/arch/arm/cpu/arm926ejs/spear/cpu.c index e39cdbaa6e..be0d14fbf0 100644 --- a/arch/arm/cpu/arm926ejs/spear/cpu.c +++ b/arch/arm/cpu/arm926ejs/spear/cpu.c @@ -83,3 +83,37 @@ int print_cpuinfo(void) return 0; } #endif + +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_ECC_BCH) +static int do_switch_ecc(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + if (argc != 2) + goto usage; + + if (strncmp(argv[1], "hw", 2) == 0) { + /* 1-bit HW ECC */ + printf("Switching to 1-bit HW ECC\n"); + fsmc_nand_switch_ecc(1); + } else if (strncmp(argv[1], "bch4", 2) == 0) { + /* 4-bit SW ECC BCH4 */ + printf("Switching to 4-bit SW ECC (BCH4)\n"); + fsmc_nand_switch_ecc(4); + } else { + goto usage; + } + + return 0; + +usage: + printf("Usage: nandecc %s\n", cmdtp->usage); + return 1; +} + +U_BOOT_CMD( + nandecc, 2, 0, do_switch_ecc, + "switch NAND ECC calculation algorithm", + "hw|bch4 - Switch between NAND hardware 1-bit HW and" + " 4-bit SW BCH\n" +); +#endif diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 6769d8fbfe..c8d142220a 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -12,7 +12,7 @@ obj-y += cache_v7.o obj-y += cpu.o cp15.o obj-y += syslib.o -ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI)$(CONFIG_ARCH_SOCFPGA),) +ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI)$(CONFIG_ARCH_SOCFPGA),) ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y) obj-y += lowlevel_init.o endif @@ -44,6 +44,7 @@ obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/ obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/ obj-$(if $(filter mx5,$(SOC)),y) += mx5/ obj-$(CONFIG_MX6) += mx6/ +obj-$(CONFIG_MX7) += mx7/ obj-$(CONFIG_OMAP34XX) += omap3/ obj-$(CONFIG_OMAP44XX) += omap4/ obj-$(CONFIG_OMAP54XX) += omap5/ @@ -51,5 +52,4 @@ obj-$(CONFIG_RMOBILE) += rmobile/ obj-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx/ obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ -obj-$(CONFIG_U8500) += u8500/ obj-$(CONFIG_VF610) += vf610/ diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c index 8dd95d9879..e2eb5f383a 100644 --- a/arch/arm/cpu/armv7/ls102xa/cpu.c +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c @@ -13,6 +13,8 @@ #include <tsec.h> #include <netdev.h> #include <fsl_esdhc.h> +#include <config.h> +#include <fsl_wdog.h> #include "fsl_epu.h" @@ -354,3 +356,16 @@ void smp_kick_all_cpus(void) asm volatile("sev"); } #endif + +void reset_cpu(ulong addr) +{ + struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; + + clrbits_be16(&wdog->wcr, WCR_SRS); + + while (1) { + /* + * Let the watchdog trigger + */ + } +} diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 8b0120fea5..0b02e9e778 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -35,19 +35,15 @@ choice config TARGET_ARISTAINETOS bool "aristainetos" - select CPU_V7 config TARGET_ARISTAINETOS2 bool "aristainetos2" - select CPU_V7 config TARGET_ARISTAINETOS2B bool "Support aristainetos2-revB" - select CPU_V7 config TARGET_CGTQMX6EVAL bool "cgtqmx6eval" - select CPU_V7 config TARGET_CM_FX6 bool "CM-FX6" @@ -58,77 +54,70 @@ config TARGET_CM_FX6 config TARGET_EMBESTMX6BOARDS bool "embestmx6boards" - select CPU_V7 config TARGET_GW_VENTANA bool "gw_ventana" - select CPU_V7 select SUPPORT_SPL config TARGET_KOSAGI_NOVENA bool "Kosagi Novena" - select CPU_V7 select SUPPORT_SPL config TARGET_MX6CUBOXI bool "Solid-run mx6 boards" - select CPU_V7 select SUPPORT_SPL config TARGET_MX6QARM2 bool "mx6qarm2" - select CPU_V7 config TARGET_MX6QSABREAUTO bool "mx6qsabreauto" - select CPU_V7 select DM select DM_THERMAL config TARGET_MX6SABRESD bool "mx6sabresd" - select CPU_V7 select SUPPORT_SPL select DM select DM_THERMAL config TARGET_MX6SLEVK bool "mx6slevk" - select CPU_V7 select SUPPORT_SPL config TARGET_MX6SXSABRESD bool "mx6sxsabresd" - select CPU_V7 select SUPPORT_SPL select DM select DM_THERMAL +config TARGET_MX6UL_9X9_EVK + bool "mx6ul_9x9_evk" + select MX6UL + select DM + select DM_THERMAL + select SUPPORT_SPL + config TARGET_MX6UL_14X14_EVK bool "mx6ul_14x14_evk" select MX6UL - select CPU_V7 select DM select DM_THERMAL select SUPPORT_SPL config TARGET_NITROGEN6X bool "nitrogen6x" - select CPU_V7 config TARGET_OT1200 bool "Bachmann OT1200" - select CPU_V7 select SUPPORT_SPL config TARGET_PLATINUM_PICON bool "platinum-picon" - select CPU_V7 select SUPPORT_SPL config TARGET_PLATINUM_TITANIUM bool "platinum-titanium" - select CPU_V7 select SUPPORT_SPL config TARGET_SECOMX6 @@ -136,28 +125,23 @@ config TARGET_SECOMX6 config TARGET_TBS2910 bool "TBS2910 Matrix ARM mini PC" - select CPU_V7 config TARGET_TITANIUM bool "titanium" - select CPU_V7 config TARGET_TQMA6 bool "TQ Systems TQMa6 board" config TARGET_UDOO bool "udoo" - select CPU_V7 select SUPPORT_SPL config TARGET_WANDBOARD bool "wandboard" - select CPU_V7 select SUPPORT_SPL config TARGET_WARP bool "WaRP" - select CPU_V7 endchoice diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index ba6cc75a7b..11efd12c9a 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -535,6 +535,8 @@ int enable_fec_anatop_clock(int fec_id, enum enet_freq freq) if (freq < ENET_25MHZ || freq > ENET_125MHZ) return -EINVAL; + reg = readl(&anatop->pll_enet); + if (fec_id == 0) { reg &= ~BM_ANADIG_PLL_ENET_DIV_SELECT; reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq); diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index cf5587be54..6b039e4531 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -702,8 +702,8 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, txs = DIV_ROUND_UP(170000, clkper) - 1; break; case 4: /* 4Gb per chip */ - trfc = DIV_ROUND_UP(300000, clkper) - 1; - txs = DIV_ROUND_UP(310000, clkper) - 1; + trfc = DIV_ROUND_UP(260000, clkper) - 1; + txs = DIV_ROUND_UP(270000, clkper) - 1; break; case 8: /* 8Gb per chip */ trfc = DIV_ROUND_UP(350000, clkper) - 1; diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 8ad8da8465..282302b1fc 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -8,9 +8,6 @@ */ #include <common.h> -#include <asm/armv7.h> -#include <asm/bootm.h> -#include <asm/pl310.h> #include <asm/errno.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> @@ -38,7 +35,7 @@ struct scu_regs { u32 fpga_rev; }; -#if defined(CONFIG_IMX6_THERMAL) +#if defined(CONFIG_IMX_THERMAL) static const struct imx_thermal_plat imx6_thermal_plat = { .regs = (void *)ANATOP_BASE_ADDR, .fuse_bank = 1, @@ -186,65 +183,6 @@ u32 __weak get_board_rev(void) } #endif -void init_aips(void) -{ - struct aipstz_regs *aips1, *aips2; -#ifdef CONFIG_MX6SX - struct aipstz_regs *aips3; -#endif - - aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR; - aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR; -#ifdef CONFIG_MX6SX - aips3 = (struct aipstz_regs *)AIPS3_CONFIG_BASE_ADDR; -#endif - - /* - * Set all MPROTx to be non-bufferable, trusted for R/W, - * not forced to user-mode. - */ - writel(0x77777777, &aips1->mprot0); - writel(0x77777777, &aips1->mprot1); - writel(0x77777777, &aips2->mprot0); - writel(0x77777777, &aips2->mprot1); - - /* - * Set all OPACRx to be non-bufferable, not require - * supervisor privilege level for access,allow for - * write access and untrusted master access. - */ - writel(0x00000000, &aips1->opacr0); - writel(0x00000000, &aips1->opacr1); - writel(0x00000000, &aips1->opacr2); - writel(0x00000000, &aips1->opacr3); - writel(0x00000000, &aips1->opacr4); - writel(0x00000000, &aips2->opacr0); - writel(0x00000000, &aips2->opacr1); - writel(0x00000000, &aips2->opacr2); - writel(0x00000000, &aips2->opacr3); - writel(0x00000000, &aips2->opacr4); - -#ifdef CONFIG_MX6SX - /* - * Set all MPROTx to be non-bufferable, trusted for R/W, - * not forced to user-mode. - */ - writel(0x77777777, &aips3->mprot0); - writel(0x77777777, &aips3->mprot1); - - /* - * Set all OPACRx to be non-bufferable, not require - * supervisor privilege level for access,allow for - * write access and untrusted master access. - */ - writel(0x00000000, &aips3->opacr0); - writel(0x00000000, &aips3->opacr1); - writel(0x00000000, &aips3->opacr2); - writel(0x00000000, &aips3->opacr3); - writel(0x00000000, &aips3->opacr4); -#endif -} - static void clear_ldo_ramp(void) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; @@ -312,20 +250,6 @@ static int set_ldo_voltage(enum ldo_reg ldo, u32 mv) return 0; } -static void imx_set_wdog_powerdown(bool enable) -{ - struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR; - struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR; - struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR; - - if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) - writew(enable, &wdog3->wmcr); - - /* Write to the PDE (Power Down Enable) bit */ - writew(enable, &wdog1->wmcr); - writew(enable, &wdog2->wmcr); -} - static void set_ahb_rate(u32 val) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; @@ -378,22 +302,6 @@ static void set_preclk_from_osc(void) } #endif -#define SRC_SCR_WARM_RESET_ENABLE 0 - -static void init_src(void) -{ - struct src *src_regs = (struct src *)SRC_BASE_ADDR; - u32 val; - - /* - * force warm reset sources to generate cold reset - * for a more reliable restart - */ - val = readl(&src_regs->scr); - val &= ~(1 << SRC_SCR_WARM_RESET_ENABLE); - writel(val, &src_regs->scr); -} - int arch_cpu_init(void) { init_aips(); @@ -440,31 +348,6 @@ int board_postclk_init(void) return 0; } -#ifndef CONFIG_SYS_DCACHE_OFF -void enable_caches(void) -{ -#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) - enum dcache_option option = DCACHE_WRITETHROUGH; -#else - enum dcache_option option = DCACHE_WRITEBACK; -#endif - - /* Avoid random hang when download by usb */ - invalidate_dcache_all(); - - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); - - /* Enable caching on OCRAM and ROM */ - mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR, - ROMCP_ARB_END_ADDR, - option); - mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR, - IRAM_SIZE, - option); -} -#endif - #if defined(CONFIG_FEC_MXC) void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { @@ -486,18 +369,6 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) } #endif -void boot_mode_apply(unsigned cfg_val) -{ - unsigned reg; - struct src *psrc = (struct src *)SRC_BASE_ADDR; - writel(cfg_val, &psrc->gpr9); - reg = readl(&psrc->gpr10); - if (cfg_val) - reg |= 1 << 28; - else - reg &= ~(1 << 28); - writel(reg, &psrc->gpr10); -} /* * cfg_val will be used for * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] @@ -605,70 +476,3 @@ void imx_setup_hdmi(void) writel(reg, &mxc_ccm->chsccdr); } #endif - -#ifndef CONFIG_SYS_L2CACHE_OFF -#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002 -void v7_outer_cache_enable(void) -{ - struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE; - unsigned int val; - - - /* - * Set bit 22 in the auxiliary control register. If this bit - * is cleared, PL310 treats Normal Shared Non-cacheable - * accesses as Cacheable no-allocate. - */ - setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE); - -#if defined CONFIG_MX6SL - struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; - val = readl(&iomux->gpr[11]); - if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) { - /* L2 cache configured as OCRAM, reset it */ - val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM; - writel(val, &iomux->gpr[11]); - } -#endif - - /* Must disable the L2 before changing the latency parameters */ - clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); - - writel(0x132, &pl310->pl310_tag_latency_ctrl); - writel(0x132, &pl310->pl310_data_latency_ctrl); - - val = readl(&pl310->pl310_prefetch_ctrl); - - /* Turn on the L2 I/D prefetch */ - val |= 0x30000000; - - /* - * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 - * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 - * But according to ARM PL310 errata: 752271 - * ID: 752271: Double linefill feature can cause data corruption - * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 - * Workaround: The only workaround to this erratum is to disable the - * double linefill feature. This is the default behavior. - */ - -#ifndef CONFIG_MX6Q - val |= 0x40800000; -#endif - writel(val, &pl310->pl310_prefetch_ctrl); - - val = readl(&pl310->pl310_power_ctrl); - val |= L2X0_DYNAMIC_CLK_GATING_EN; - val |= L2X0_STNDBY_MODE_EN; - writel(val, &pl310->pl310_power_ctrl); - - setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); -} - -void v7_outer_cache_disable(void) -{ - struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE; - - clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); -} -#endif /* !CONFIG_SYS_L2CACHE_OFF */ diff --git a/arch/arm/cpu/armv7/mx7/Kconfig b/arch/arm/cpu/armv7/mx7/Kconfig new file mode 100644 index 0000000000..ea19e5c411 --- /dev/null +++ b/arch/arm/cpu/armv7/mx7/Kconfig @@ -0,0 +1,26 @@ +if ARCH_MX7 + +config MX7 + bool + default y + +config MX7D + bool + +choice + prompt "MX7 board select" + optional + +config TARGET_MX7DSABRESD + bool "mx7dsabresd" + select DM + select DM_THERMAL + +endchoice + +config SYS_SOC + default "mx7" + +source "board/freescale/mx7dsabresd/Kconfig" + +endif diff --git a/arch/arm/cpu/armv7/mx7/Makefile b/arch/arm/cpu/armv7/mx7/Makefile new file mode 100644 index 0000000000..e6ecef010c --- /dev/null +++ b/arch/arm/cpu/armv7/mx7/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2015 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# +# + +obj-y := soc.o clock.o clock_slice.o diff --git a/arch/arm/cpu/armv7/mx7/clock.c b/arch/arm/cpu/armv7/mx7/clock.c new file mode 100644 index 0000000000..77db6e8306 --- /dev/null +++ b/arch/arm/cpu/armv7/mx7/clock.c @@ -0,0 +1,1127 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * Author: + * Peng Fan <Peng.Fan@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <div64.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> + +struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *) + ANATOP_BASE_ADDR; +struct mxc_ccm_reg *ccm_reg = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + +#ifdef CONFIG_FSL_ESDHC +DECLARE_GLOBAL_DATA_PTR; +#endif + +int get_clocks(void) +{ +#ifdef CONFIG_FSL_ESDHC +#if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC2_BASE_ADDR + gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); +#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC3_BASE_ADDR + gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); +#else + gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); +#endif +#endif + return 0; +} + +u32 get_ahb_clk(void) +{ + return get_root_clk(AHB_CLK_ROOT); +} + +static u32 get_ipg_clk(void) +{ + /* + * The AHB and IPG are fixed at 2:1 ratio, and synchronized to + * each other. + */ + return get_ahb_clk() / 2; +} + +u32 imx_get_uartclk(void) +{ + return get_root_clk(UART1_CLK_ROOT); +} + +u32 imx_get_fecclk(void) +{ + return get_root_clk(ENET_AXI_CLK_ROOT); +} + +#ifdef CONFIG_MXC_OCOTP +void enable_ocotp_clk(unsigned char enable) +{ + clock_enable(CCGR_OCOTP, enable); +} + +void enable_thermal_clk(void) +{ + enable_ocotp_clk(1); +} +#endif + +void enable_usboh3_clk(unsigned char enable) +{ + u32 target; + + if (enable) { + /* disable the clock gate first */ + clock_enable(CCGR_USB_HSIC, 0); + + /* 120Mhz */ + target = CLK_ROOT_ON | + USB_HSIC_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(USB_HSIC_CLK_ROOT, target); + + /* enable the clock gate */ + clock_enable(CCGR_USB_CTRL, 1); + clock_enable(CCGR_USB_HSIC, 1); + clock_enable(CCGR_USB_PHY1, 1); + clock_enable(CCGR_USB_PHY2, 1); + } else { + clock_enable(CCGR_USB_CTRL, 0); + clock_enable(CCGR_USB_HSIC, 0); + clock_enable(CCGR_USB_PHY1, 0); + clock_enable(CCGR_USB_PHY2, 0); + } +} + +static u32 decode_pll(enum pll_clocks pll, u32 infreq) +{ + u32 reg, div_sel; + u32 num, denom; + + /* + * Alought there are four choices for the bypass src, + * we choose OSC_24M which is the default set in ROM. + */ + switch (pll) { + case PLL_CORE: + reg = readl(&ccm_anatop->pll_arm); + + if (reg & CCM_ANALOG_PLL_ARM_POWERDOWN_MASK) + return 0; + + if (reg & CCM_ANALOG_PLL_ARM_BYPASS_MASK) + return MXC_HCLK; + + div_sel = (reg & CCM_ANALOG_PLL_ARM_DIV_SELECT_MASK) >> + CCM_ANALOG_PLL_ARM_DIV_SELECT_SHIFT; + + return (infreq * div_sel) / 2; + + case PLL_SYS: + reg = readl(&ccm_anatop->pll_480); + + if (reg & CCM_ANALOG_PLL_480_POWERDOWN_MASK) + return 0; + + if (reg & CCM_ANALOG_PLL_480_BYPASS_MASK) + return MXC_HCLK; + + if (((reg & CCM_ANALOG_PLL_480_DIV_SELECT_MASK) >> + CCM_ANALOG_PLL_480_DIV_SELECT_SHIFT) == 0) + return 480000000u; + else + return 528000000u; + + case PLL_ENET: + reg = readl(&ccm_anatop->pll_enet); + + if (reg & CCM_ANALOG_PLL_ENET_POWERDOWN_MASK) + return 0; + + if (reg & CCM_ANALOG_PLL_ENET_BYPASS_MASK) + return MXC_HCLK; + + return 1000000000u; + + case PLL_DDR: + reg = readl(&ccm_anatop->pll_ddr); + + if (reg & CCM_ANALOG_PLL_DDR_POWERDOWN_MASK) + return 0; + + num = ccm_anatop->pll_ddr_num; + denom = ccm_anatop->pll_ddr_denom; + + if (reg & CCM_ANALOG_PLL_DDR_BYPASS_MASK) + return MXC_HCLK; + + div_sel = (reg & CCM_ANALOG_PLL_DDR_DIV_SELECT_MASK) >> + CCM_ANALOG_PLL_DDR_DIV_SELECT_SHIFT; + + return infreq * (div_sel + num / denom); + + case PLL_USB: + return 480000000u; + + default: + printf("Unsupported pll clocks %d\n", pll); + break; + } + + return 0; +} + +static u32 mxc_get_pll_sys_derive(int derive) +{ + u32 freq, div, frac; + u32 reg; + + div = 1; + reg = readl(&ccm_anatop->pll_480); + freq = decode_pll(PLL_SYS, MXC_HCLK); + + switch (derive) { + case PLL_SYS_MAIN_480M_CLK: + if (reg & CCM_ANALOG_PLL_480_MAIN_DIV1_CLKGATE_MASK) + return 0; + else + return freq; + case PLL_SYS_MAIN_240M_CLK: + if (reg & CCM_ANALOG_PLL_480_MAIN_DIV2_CLKGATE_MASK) + return 0; + else + return freq / 2; + case PLL_SYS_MAIN_120M_CLK: + if (reg & CCM_ANALOG_PLL_480_MAIN_DIV4_CLKGATE_MASK) + return 0; + else + return freq / 4; + case PLL_SYS_PFD0_392M_CLK: + reg = readl(&ccm_anatop->pfd_480a); + if (reg & CCM_ANALOG_PFD_480A_PFD0_DIV1_CLKGATE_MASK) + return 0; + frac = (reg & CCM_ANALOG_PFD_480A_PFD0_FRAC_MASK) >> + CCM_ANALOG_PFD_480A_PFD0_FRAC_SHIFT; + break; + case PLL_SYS_PFD0_196M_CLK: + if (reg & CCM_ANALOG_PLL_480_PFD0_DIV2_CLKGATE_MASK) + return 0; + reg = readl(&ccm_anatop->pfd_480a); + frac = (reg & CCM_ANALOG_PFD_480A_PFD0_FRAC_MASK) >> + CCM_ANALOG_PFD_480A_PFD0_FRAC_SHIFT; + div = 2; + break; + case PLL_SYS_PFD1_332M_CLK: + reg = readl(&ccm_anatop->pfd_480a); + if (reg & CCM_ANALOG_PFD_480A_PFD1_DIV1_CLKGATE_MASK) + return 0; + frac = (reg & CCM_ANALOG_PFD_480A_PFD1_FRAC_MASK) >> + CCM_ANALOG_PFD_480A_PFD1_FRAC_SHIFT; + break; + case PLL_SYS_PFD1_166M_CLK: + if (reg & CCM_ANALOG_PLL_480_PFD1_DIV2_CLKGATE_MASK) + return 0; + reg = readl(&ccm_anatop->pfd_480a); + frac = (reg & CCM_ANALOG_PFD_480A_PFD1_FRAC_MASK) >> + CCM_ANALOG_PFD_480A_PFD1_FRAC_SHIFT; + div = 2; + break; + case PLL_SYS_PFD2_270M_CLK: + reg = readl(&ccm_anatop->pfd_480a); + if (reg & CCM_ANALOG_PFD_480A_PFD2_DIV1_CLKGATE_MASK) + return 0; + frac = (reg & CCM_ANALOG_PFD_480A_PFD2_FRAC_MASK) >> + CCM_ANALOG_PFD_480A_PFD2_FRAC_SHIFT; + break; + case PLL_SYS_PFD2_135M_CLK: + if (reg & CCM_ANALOG_PLL_480_PFD2_DIV2_CLKGATE_MASK) + return 0; + reg = readl(&ccm_anatop->pfd_480a); + frac = (reg & CCM_ANALOG_PFD_480A_PFD2_FRAC_MASK) >> + CCM_ANALOG_PFD_480A_PFD2_FRAC_SHIFT; + div = 2; + break; + case PLL_SYS_PFD3_CLK: + reg = readl(&ccm_anatop->pfd_480a); + if (reg & CCM_ANALOG_PFD_480A_PFD3_DIV1_CLKGATE_MASK) + return 0; + frac = (reg & CCM_ANALOG_PFD_480A_PFD3_FRAC_MASK) >> + CCM_ANALOG_PFD_480A_PFD3_FRAC_SHIFT; + break; + case PLL_SYS_PFD4_CLK: + reg = readl(&ccm_anatop->pfd_480b); + if (reg & CCM_ANALOG_PFD_480B_PFD4_DIV1_CLKGATE_MASK) + return 0; + frac = (reg & CCM_ANALOG_PFD_480B_PFD4_FRAC_MASK) >> + CCM_ANALOG_PFD_480B_PFD4_FRAC_SHIFT; + break; + case PLL_SYS_PFD5_CLK: + reg = readl(&ccm_anatop->pfd_480b); + if (reg & CCM_ANALOG_PFD_480B_PFD5_DIV1_CLKGATE_MASK) + return 0; + frac = (reg & CCM_ANALOG_PFD_480B_PFD5_FRAC_MASK) >> + CCM_ANALOG_PFD_480B_PFD5_FRAC_SHIFT; + break; + case PLL_SYS_PFD6_CLK: + reg = readl(&ccm_anatop->pfd_480b); + if (reg & CCM_ANALOG_PFD_480B_PFD6_DIV1_CLKGATE_MASK) + return 0; + frac = (reg & CCM_ANALOG_PFD_480B_PFD6_FRAC_MASK) >> + CCM_ANALOG_PFD_480B_PFD6_FRAC_SHIFT; + break; + case PLL_SYS_PFD7_CLK: + reg = readl(&ccm_anatop->pfd_480b); + if (reg & CCM_ANALOG_PFD_480B_PFD7_DIV1_CLKGATE_MASK) + return 0; + frac = (reg & CCM_ANALOG_PFD_480B_PFD7_FRAC_MASK) >> + CCM_ANALOG_PFD_480B_PFD7_FRAC_SHIFT; + break; + default: + printf("Error derived pll_sys clock %d\n", derive); + return 0; + } + + return ((freq / frac) * 18) / div; +} + +static u32 mxc_get_pll_enet_derive(int derive) +{ + u32 freq, reg; + + freq = decode_pll(PLL_ENET, MXC_HCLK); + reg = readl(&ccm_anatop->pll_enet); + + switch (derive) { + case PLL_ENET_MAIN_500M_CLK: + if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_500MHZ_MASK) + return freq / 2; + break; + case PLL_ENET_MAIN_250M_CLK: + if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_250MHZ_MASK) + return freq / 4; + break; + case PLL_ENET_MAIN_125M_CLK: + if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_125MHZ_MASK) + return freq / 8; + break; + case PLL_ENET_MAIN_100M_CLK: + if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_100MHZ_MASK) + return freq / 10; + break; + case PLL_ENET_MAIN_50M_CLK: + if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_50MHZ_MASK) + return freq / 20; + break; + case PLL_ENET_MAIN_40M_CLK: + if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_40MHZ_MASK) + return freq / 25; + break; + case PLL_ENET_MAIN_25M_CLK: + if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_25MHZ_MASK) + return freq / 40; + break; + default: + printf("Error derived pll_enet clock %d\n", derive); + break; + } + + return 0; +} + +static u32 mxc_get_pll_ddr_derive(int derive) +{ + u32 freq, reg; + + freq = decode_pll(PLL_DDR, MXC_HCLK); + reg = readl(&ccm_anatop->pll_ddr); + + switch (derive) { + case PLL_DRAM_MAIN_1066M_CLK: + return freq; + case PLL_DRAM_MAIN_533M_CLK: + if (reg & CCM_ANALOG_PLL_DDR_DIV2_ENABLE_CLK_MASK) + return freq / 2; + break; + default: + printf("Error derived pll_ddr clock %d\n", derive); + break; + } + + return 0; +} + +static u32 mxc_get_pll_derive(enum pll_clocks pll, int derive) +{ + switch (pll) { + case PLL_SYS: + return mxc_get_pll_sys_derive(derive); + case PLL_ENET: + return mxc_get_pll_enet_derive(derive); + case PLL_DDR: + return mxc_get_pll_ddr_derive(derive); + default: + printf("Error pll.\n"); + return 0; + } +} + +static u32 get_root_src_clk(enum clk_root_src root_src) +{ + switch (root_src) { + case OSC_24M_CLK: + return 24000000u; + case PLL_ARM_MAIN_800M_CLK: + return decode_pll(PLL_CORE, MXC_HCLK); + + case PLL_SYS_MAIN_480M_CLK: + case PLL_SYS_MAIN_240M_CLK: + case PLL_SYS_MAIN_120M_CLK: + case PLL_SYS_PFD0_392M_CLK: + case PLL_SYS_PFD0_196M_CLK: + case PLL_SYS_PFD1_332M_CLK: + case PLL_SYS_PFD1_166M_CLK: + case PLL_SYS_PFD2_270M_CLK: + case PLL_SYS_PFD2_135M_CLK: + case PLL_SYS_PFD3_CLK: + case PLL_SYS_PFD4_CLK: + case PLL_SYS_PFD5_CLK: + case PLL_SYS_PFD6_CLK: + case PLL_SYS_PFD7_CLK: + return mxc_get_pll_derive(PLL_SYS, root_src); + + case PLL_ENET_MAIN_500M_CLK: + case PLL_ENET_MAIN_250M_CLK: + case PLL_ENET_MAIN_125M_CLK: + case PLL_ENET_MAIN_100M_CLK: + case PLL_ENET_MAIN_50M_CLK: + case PLL_ENET_MAIN_40M_CLK: + case PLL_ENET_MAIN_25M_CLK: + return mxc_get_pll_derive(PLL_ENET, root_src); + + case PLL_DRAM_MAIN_1066M_CLK: + case PLL_DRAM_MAIN_533M_CLK: + return mxc_get_pll_derive(PLL_DDR, root_src); + + case PLL_AUDIO_MAIN_CLK: + return decode_pll(PLL_AUDIO, MXC_HCLK); + case PLL_VIDEO_MAIN_CLK: + return decode_pll(PLL_VIDEO, MXC_HCLK); + + case PLL_USB_MAIN_480M_CLK: + return decode_pll(PLL_USB, MXC_HCLK); + + case REF_1M_CLK: + return 1000000; + case OSC_32K_CLK: + return MXC_CLK32; + + case EXT_CLK_1: + case EXT_CLK_2: + case EXT_CLK_3: + case EXT_CLK_4: + printf("No EXT CLK supported??\n"); + break; + }; + + return 0; +} + +u32 get_root_clk(enum clk_root_index clock_id) +{ + enum clk_root_src root_src; + u32 post_podf, pre_podf, auto_podf, root_src_clk; + int auto_en; + + if (clock_root_enabled(clock_id) <= 0) + return 0; + + if (clock_get_prediv(clock_id, &pre_podf) < 0) + return 0; + + if (clock_get_postdiv(clock_id, &post_podf) < 0) + return 0; + + if (clock_get_autopostdiv(clock_id, &auto_podf, &auto_en) < 0) + return 0; + + if (auto_en == 0) + auto_podf = 0; + + if (clock_get_src(clock_id, &root_src) < 0) + return 0; + + root_src_clk = get_root_src_clk(root_src); + + /* + * bypass clk is ignored. + */ + + return root_src_clk / (post_podf + 1) / (pre_podf + 1) / + (auto_podf + 1); +} + +static u32 get_ddrc_clk(void) +{ + u32 reg, freq; + enum root_post_div post_div; + + reg = readl(&ccm_reg->root[DRAM_CLK_ROOT].target_root); + if (reg & CLK_ROOT_MUX_MASK) + /* DRAM_ALT_CLK_ROOT */ + freq = get_root_clk(DRAM_ALT_CLK_ROOT); + else + /* PLL_DRAM_MAIN_1066M_CLK */ + freq = mxc_get_pll_derive(PLL_DDR, PLL_DRAM_MAIN_1066M_CLK); + + post_div = reg & DRAM_CLK_ROOT_POST_DIV_MASK; + + return freq / (post_div + 1) / 2; +} + +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return get_root_clk(ARM_A7_CLK_ROOT); + case MXC_AXI_CLK: + return get_root_clk(MAIN_AXI_CLK_ROOT); + case MXC_AHB_CLK: + return get_root_clk(AHB_CLK_ROOT); + case MXC_IPG_CLK: + return get_ipg_clk(); + case MXC_I2C_CLK: + return get_root_clk(I2C1_CLK_ROOT); + case MXC_UART_CLK: + return get_root_clk(UART1_CLK_ROOT); + case MXC_CSPI_CLK: + return get_root_clk(ECSPI1_CLK_ROOT); + case MXC_DDR_CLK: + return get_ddrc_clk(); + case MXC_ESDHC_CLK: + return get_root_clk(USDHC1_CLK_ROOT); + case MXC_ESDHC2_CLK: + return get_root_clk(USDHC2_CLK_ROOT); + case MXC_ESDHC3_CLK: + return get_root_clk(USDHC3_CLK_ROOT); + default: + printf("Unsupported mxc_clock %d\n", clk); + break; + } + + return 0; +} + +#ifdef CONFIG_SYS_I2C_MXC +/* i2c_num can be 0 - 3 */ +int enable_i2c_clk(unsigned char enable, unsigned i2c_num) +{ + u32 target; + + if (i2c_num >= 4) + return -EINVAL; + + if (enable) { + clock_enable(CCGR_I2C1 + i2c_num, 0); + + /* Set i2c root clock to PLL_SYS_MAIN_120M_CLK */ + + target = CLK_ROOT_ON | + I2C1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2); + clock_set_target_val(I2C1_CLK_ROOT + i2c_num, target); + + clock_enable(CCGR_I2C1 + i2c_num, 1); + } else { + clock_enable(CCGR_I2C1 + i2c_num, 0); + } + + return 0; +} +#endif + +static void init_clk_esdhc(void) +{ + u32 target; + + /* disable the clock gate first */ + clock_enable(CCGR_USDHC1, 0); + clock_enable(CCGR_USDHC2, 0); + clock_enable(CCGR_USDHC3, 0); + + /* 196: 392/2 */ + target = CLK_ROOT_ON | USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2); + clock_set_target_val(USDHC1_CLK_ROOT, target); + + target = CLK_ROOT_ON | USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2); + clock_set_target_val(USDHC2_CLK_ROOT, target); + + target = CLK_ROOT_ON | USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2); + clock_set_target_val(USDHC3_CLK_ROOT, target); + + /* enable the clock gate */ + clock_enable(CCGR_USDHC1, 1); + clock_enable(CCGR_USDHC2, 1); + clock_enable(CCGR_USDHC3, 1); +} + +static void init_clk_uart(void) +{ + u32 target; + + /* disable the clock gate first */ + clock_enable(CCGR_UART1, 0); + clock_enable(CCGR_UART2, 0); + clock_enable(CCGR_UART3, 0); + clock_enable(CCGR_UART4, 0); + clock_enable(CCGR_UART5, 0); + clock_enable(CCGR_UART6, 0); + clock_enable(CCGR_UART7, 0); + + /* 24Mhz */ + target = CLK_ROOT_ON | UART1_CLK_ROOT_FROM_OSC_24M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(UART1_CLK_ROOT, target); + + target = CLK_ROOT_ON | UART2_CLK_ROOT_FROM_OSC_24M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(UART2_CLK_ROOT, target); + + target = CLK_ROOT_ON | UART3_CLK_ROOT_FROM_OSC_24M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(UART3_CLK_ROOT, target); + + target = CLK_ROOT_ON | UART4_CLK_ROOT_FROM_OSC_24M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(UART4_CLK_ROOT, target); + + target = CLK_ROOT_ON | UART5_CLK_ROOT_FROM_OSC_24M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(UART5_CLK_ROOT, target); + + target = CLK_ROOT_ON | UART6_CLK_ROOT_FROM_OSC_24M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(UART6_CLK_ROOT, target); + + target = CLK_ROOT_ON | UART7_CLK_ROOT_FROM_OSC_24M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(UART7_CLK_ROOT, target); + + /* enable the clock gate */ + clock_enable(CCGR_UART1, 1); + clock_enable(CCGR_UART2, 1); + clock_enable(CCGR_UART3, 1); + clock_enable(CCGR_UART4, 1); + clock_enable(CCGR_UART5, 1); + clock_enable(CCGR_UART6, 1); + clock_enable(CCGR_UART7, 1); +} + +static void init_clk_weim(void) +{ + u32 target; + + /* disable the clock gate first */ + clock_enable(CCGR_WEIM, 0); + + /* 120Mhz */ + target = CLK_ROOT_ON | EIM_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(EIM_CLK_ROOT, target); + + /* enable the clock gate */ + clock_enable(CCGR_WEIM, 1); +} + +static void init_clk_ecspi(void) +{ + u32 target; + + /* disable the clock gate first */ + clock_enable(CCGR_ECSPI1, 0); + clock_enable(CCGR_ECSPI2, 0); + clock_enable(CCGR_ECSPI3, 0); + clock_enable(CCGR_ECSPI4, 0); + + /* 60Mhz: 240/4 */ + target = CLK_ROOT_ON | ECSPI1_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4); + clock_set_target_val(ECSPI1_CLK_ROOT, target); + + target = CLK_ROOT_ON | ECSPI2_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4); + clock_set_target_val(ECSPI2_CLK_ROOT, target); + + target = CLK_ROOT_ON | ECSPI3_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4); + clock_set_target_val(ECSPI3_CLK_ROOT, target); + + target = CLK_ROOT_ON | ECSPI4_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4); + clock_set_target_val(ECSPI4_CLK_ROOT, target); + + /* enable the clock gate */ + clock_enable(CCGR_ECSPI1, 1); + clock_enable(CCGR_ECSPI2, 1); + clock_enable(CCGR_ECSPI3, 1); + clock_enable(CCGR_ECSPI4, 1); +} + +static void init_clk_wdog(void) +{ + u32 target; + + /* disable the clock gate first */ + clock_enable(CCGR_WDOG1, 0); + clock_enable(CCGR_WDOG2, 0); + clock_enable(CCGR_WDOG3, 0); + clock_enable(CCGR_WDOG4, 0); + + /* 24Mhz */ + target = CLK_ROOT_ON | WDOG_CLK_ROOT_FROM_OSC_24M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(WDOG_CLK_ROOT, target); + + /* enable the clock gate */ + clock_enable(CCGR_WDOG1, 1); + clock_enable(CCGR_WDOG2, 1); + clock_enable(CCGR_WDOG3, 1); + clock_enable(CCGR_WDOG4, 1); +} + +#ifdef CONFIG_MXC_EPDC +static void init_clk_epdc(void) +{ + u32 target; + + /* disable the clock gate first */ + clock_enable(CCGR_EPDC, 0); + + /* 24Mhz */ + target = CLK_ROOT_ON | EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV12); + clock_set_target_val(EPDC_PIXEL_CLK_ROOT, target); + + /* enable the clock gate */ + clock_enable(CCGR_EPDC, 1); +} +#endif + +static int enable_pll_enet(void) +{ + u32 reg; + s32 timeout = 100000; + + reg = readl(&ccm_anatop->pll_enet); + /* If pll_enet powered up, no need to set it again */ + if (reg & ANADIG_PLL_ENET_PWDN_MASK) { + reg &= ~ANADIG_PLL_ENET_PWDN_MASK; + writel(reg, &ccm_anatop->pll_enet); + + while (timeout--) { + if (readl(&ccm_anatop->pll_enet) & ANADIG_PLL_LOCK) + break; + } + + if (timeout <= 0) { + /* If timeout, we set pwdn for pll_enet. */ + reg |= ANADIG_PLL_ENET_PWDN_MASK; + return -ETIME; + } + } + + /* Clear bypass */ + writel(CCM_ANALOG_PLL_ENET_BYPASS_MASK, &ccm_anatop->pll_enet_clr); + + writel((CCM_ANALOG_PLL_ENET_ENABLE_CLK_500MHZ_MASK + | CCM_ANALOG_PLL_ENET_ENABLE_CLK_250MHZ_MASK + | CCM_ANALOG_PLL_ENET_ENABLE_CLK_125MHZ_MASK + | CCM_ANALOG_PLL_ENET_ENABLE_CLK_100MHZ_MASK + | CCM_ANALOG_PLL_ENET_ENABLE_CLK_50MHZ_MASK + | CCM_ANALOG_PLL_ENET_ENABLE_CLK_40MHZ_MASK + | CCM_ANALOG_PLL_ENET_ENABLE_CLK_25MHZ_MASK), + &ccm_anatop->pll_enet_set); + + return 0; +} +static int enable_pll_video(u32 pll_div, u32 pll_num, u32 pll_denom, + u32 post_div) +{ + u32 reg = 0; + ulong start; + + debug("pll5 div = %d, num = %d, denom = %d\n", + pll_div, pll_num, pll_denom); + + /* Power up PLL5 video and disable its output */ + writel(CCM_ANALOG_PLL_VIDEO_CLR_ENABLE_CLK_MASK | + CCM_ANALOG_PLL_VIDEO_CLR_POWERDOWN_MASK | + CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_MASK | + CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT_MASK | + CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL_MASK | + CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT_MASK, + &ccm_anatop->pll_video_clr); + + /* Set div, num and denom */ + switch (post_div) { + case 1: + writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) | + CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x1) | + CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x0), + &ccm_anatop->pll_video_set); + break; + case 2: + writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) | + CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x0) | + CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x0), + &ccm_anatop->pll_video_set); + break; + case 3: + writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) | + CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x0) | + CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x1), + &ccm_anatop->pll_video_set); + break; + case 4: + writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) | + CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x0) | + CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x3), + &ccm_anatop->pll_video_set); + break; + case 0: + default: + writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) | + CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x2) | + CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x0), + &ccm_anatop->pll_video_set); + break; + } + + writel(CCM_ANALOG_PLL_VIDEO_NUM_A(pll_num), + &ccm_anatop->pll_video_num); + + writel(CCM_ANALOG_PLL_VIDEO_DENOM_B(pll_denom), + &ccm_anatop->pll_video_denom); + + /* Wait PLL5 lock */ + start = get_timer(0); /* Get current timestamp */ + + do { + reg = readl(&ccm_anatop->pll_video); + if (reg & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) { + /* Enable PLL out */ + writel(CCM_ANALOG_PLL_VIDEO_CLR_ENABLE_CLK_MASK, + &ccm_anatop->pll_video_set); + return 0; + } + } while (get_timer(0) < (start + 10)); /* Wait 10ms */ + + printf("Lock PLL5 timeout\n"); + + return 1; +} + +int set_clk_qspi(void) +{ + u32 target; + + /* disable the clock gate first */ + clock_enable(CCGR_QSPI, 0); + + /* 49M: 392/2/4 */ + target = CLK_ROOT_ON | QSPI_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2); + clock_set_target_val(QSPI_CLK_ROOT, target); + + /* enable the clock gate */ + clock_enable(CCGR_QSPI, 1); + + return 0; +} + +int set_clk_nand(void) +{ + u32 target; + + /* disable the clock gate first */ + clock_enable(CCGR_RAWNAND, 0); + + enable_pll_enet(); + /* 100: 500/5 */ + target = CLK_ROOT_ON | NAND_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV5); + clock_set_target_val(NAND_CLK_ROOT, target); + + /* enable the clock gate */ + clock_enable(CCGR_RAWNAND, 1); + + return 0; +} + +void mxs_set_lcdclk(uint32_t base_addr, uint32_t freq) +{ + u32 hck = MXC_HCLK/1000; + u32 min = hck * 27; + u32 max = hck * 54; + u32 temp, best = 0; + u32 i, j, pred = 1, postd = 1; + u32 pll_div, pll_num, pll_denom, post_div = 0; + u32 target; + + debug("mxs_set_lcdclk, freq = %d\n", freq); + + clock_enable(CCGR_LCDIF, 0); + + temp = (freq * 8 * 8); + if (temp < min) { + for (i = 1; i <= 4; i++) { + if ((temp * (1 << i)) > min) { + post_div = i; + freq = (freq * (1 << i)); + break; + } + } + + if (5 == i) { + printf("Fail to set rate to %dkhz", freq); + return; + } + } + + for (i = 1; i <= 8; i++) { + for (j = 1; j <= 8; j++) { + temp = freq * i * j; + if (temp > max || temp < min) + continue; + + if (best == 0 || temp < best) { + best = temp; + pred = i; + postd = j; + } + } + } + + if (best == 0) { + printf("Fail to set rate to %dkhz", freq); + return; + } + + debug("best %d, pred = %d, postd = %d\n", best, pred, postd); + + pll_div = best / hck; + pll_denom = 1000000; + pll_num = (best - hck * pll_div) * pll_denom / hck; + + if (enable_pll_video(pll_div, pll_num, pll_denom, post_div)) + return; + + target = CLK_ROOT_ON | LCDIF_PIXEL_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK | + CLK_ROOT_PRE_DIV((pred - 1)) | CLK_ROOT_POST_DIV((postd - 1)); + clock_set_target_val(LCDIF_PIXEL_CLK_ROOT, target); + + clock_enable(CCGR_LCDIF, 1); +} + +#ifdef CONFIG_FEC_MXC +int set_clk_enet(enum enet_freq type) +{ + u32 target; + int ret; + u32 enet1_ref, enet2_ref; + + /* disable the clock first */ + clock_enable(CCGR_ENET1, 0); + clock_enable(CCGR_ENET2, 0); + + switch (type) { + case ENET_125MHz: + enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK; + enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK; + break; + case ENET_50MHz: + enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK; + enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK; + break; + case ENET_25MHz: + enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK; + enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK; + break; + default: + return -EINVAL; + } + + ret = enable_pll_enet(); + if (ret != 0) + return ret; + + /* set enet axi clock 196M: 392/2 */ + target = CLK_ROOT_ON | ENET_AXI_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2); + clock_set_target_val(ENET_AXI_CLK_ROOT, target); + + target = CLK_ROOT_ON | enet1_ref | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(ENET1_REF_CLK_ROOT, target); + + target = CLK_ROOT_ON | ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4); + clock_set_target_val(ENET1_TIME_CLK_ROOT, target); + + target = CLK_ROOT_ON | enet2_ref | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(ENET2_REF_CLK_ROOT, target); + + target = CLK_ROOT_ON | ENET2_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4); + clock_set_target_val(ENET2_TIME_CLK_ROOT, target); + +#ifdef CONFIG_FEC_MXC_25M_REF_CLK + target = CLK_ROOT_ON | + ENET_PHY_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | + CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1); + clock_set_target_val(ENET_PHY_REF_CLK_ROOT, target); +#endif + /* enable clock */ + clock_enable(CCGR_ENET1, 1); + clock_enable(CCGR_ENET2, 1); + + return 0; +} +#endif + +/* Configure PLL/PFD freq */ +void clock_init(void) +{ +/* Rom has enabled PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET + * In u-boot, we have to: + * 1. Configure PFD3- PFD7 for freq we needed in u-boot + * 2. Set clock root for peripherals (ip channel) used in u-boot but without set rate + * interface. The clocks for these peripherals are enabled after this intialization. + * 3. Other peripherals with set clock rate interface does not be set in this function. + */ + u32 reg; + + /* + * Configure PFD4 to 392M + * 480M * 18 / 0x16 = 392M + */ + reg = readl(&ccm_anatop->pfd_480b); + + reg &= ~(ANATOP_PFD480B_PFD4_FRAC_MASK | + CCM_ANALOG_PFD_480B_PFD4_DIV1_CLKGATE_MASK); + reg |= ANATOP_PFD480B_PFD4_FRAC_392M_VAL; + + writel(reg, &ccm_anatop->pfd_480b); + + init_clk_esdhc(); + init_clk_uart(); + init_clk_weim(); + init_clk_ecspi(); + init_clk_wdog(); +#ifdef CONFIG_MXC_EPDC + init_clk_epdc(); +#endif + + enable_usboh3_clk(1); + + clock_enable(CCGR_SNVS, 1); + +#ifdef CONFIG_NAND_MXS + clock_enable(CCGR_RAWNAND, 1); +#endif +} + +#ifdef CONFIG_SECURE_BOOT +void hab_caam_clock_enable(unsigned char enable) +{ + if (enable) + clock_enable(CCGR_CAAM, 1); + else + clock_enable(CCGR_CAAM, 0); +} +#endif + +#ifdef CONFIG_MXC_EPDC +void epdc_clock_enable(void) +{ + clock_enable(CCGR_EPDC, 1); +} +void epdc_clock_disable(void) +{ + clock_enable(CCGR_EPDC, 0); +} +#endif + +/* + * Dump some core clockes. + */ +int do_mx7_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u32 freq; + freq = decode_pll(PLL_CORE, MXC_HCLK); + printf("PLL_CORE %8d MHz\n", freq / 1000000); + freq = decode_pll(PLL_SYS, MXC_HCLK); + printf("PLL_SYS %8d MHz\n", freq / 1000000); + freq = decode_pll(PLL_ENET, MXC_HCLK); + printf("PLL_NET %8d MHz\n", freq / 1000000); + + printf("\n"); + + printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); + printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000); +#ifdef CONFIG_MXC_SPI + printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000); +#endif + printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000); + printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000); + printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000); + printf("USDHC1 %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000); + printf("USDHC2 %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000); + printf("USDHC3 %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000); + + return 0; +} + +U_BOOT_CMD( + clocks, CONFIG_SYS_MAXARGS, 1, do_mx7_showclocks, + "display clocks", + "" +); diff --git a/arch/arm/cpu/armv7/mx7/clock_slice.c b/arch/arm/cpu/armv7/mx7/clock_slice.c new file mode 100644 index 0000000000..ad5d504d28 --- /dev/null +++ b/arch/arm/cpu/armv7/mx7/clock_slice.c @@ -0,0 +1,757 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * Author: + * Peng Fan <Peng.Fan@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <div64.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> + +struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + +static struct clk_root_map root_array[] = { + {ARM_A7_CLK_ROOT, CCM_CORE_CHANNEL, + {OSC_24M_CLK, PLL_ARM_MAIN_800M_CLK, PLL_ENET_MAIN_500M_CLK, + PLL_DRAM_MAIN_1066M_CLK, PLL_SYS_MAIN_480M_CLK, + PLL_SYS_PFD0_392M_CLK, PLL_AUDIO_MAIN_CLK, PLL_USB_MAIN_480M_CLK} + }, + {ARM_M4_CLK_ROOT, CCM_BUS_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_250M_CLK, + PLL_SYS_PFD2_270M_CLK, PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_VIDEO_MAIN_CLK, PLL_USB_MAIN_480M_CLK} + }, + {ARM_M0_CLK_ROOT, CCM_BUS_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_ENET_MAIN_125M_CLK, + PLL_SYS_PFD2_135M_CLK, PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_VIDEO_MAIN_CLK, PLL_USB_MAIN_480M_CLK} + }, + {MAIN_AXI_CLK_ROOT, CCM_BUS_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD1_332M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_ENET_MAIN_250M_CLK, PLL_SYS_PFD5_CLK, PLL_AUDIO_MAIN_CLK, + PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD7_CLK} + }, + {DISP_AXI_CLK_ROOT, CCM_BUS_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD1_332M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_ENET_MAIN_250M_CLK, PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK, + PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK} + }, + {ENET_AXI_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_270M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_ENET_MAIN_250M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD4_CLK} + }, + {NAND_USDHC_BUS_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_270M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_SYS_MAIN_240M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_PFD6_CLK, + PLL_ENET_MAIN_250M_CLK, PLL_AUDIO_MAIN_CLK} + }, + {AHB_CLK_ROOT, CCM_AHB_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_SYS_PFD0_392M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_USB_MAIN_480M_CLK, + PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK} + }, + {DRAM_PHYM_CLK_ROOT, CCM_DRAM_PHYM_CHANNEL, + {PLL_DRAM_MAIN_1066M_CLK, DRAM_PHYM_ALT_CLK_ROOT} + }, + {DRAM_CLK_ROOT, CCM_DRAM_CHANNEL, + {PLL_DRAM_MAIN_1066M_CLK, DRAM_ALT_CLK_ROOT} + }, + {DRAM_PHYM_ALT_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_DRAM_MAIN_533M_CLK, PLL_SYS_MAIN_480M_CLK, + PLL_ENET_MAIN_500M_CLK, PLL_USB_MAIN_480M_CLK, PLL_SYS_PFD7_CLK, + PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK} + }, + {DRAM_ALT_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_DRAM_MAIN_533M_CLK, PLL_SYS_MAIN_480M_CLK, + PLL_ENET_MAIN_500M_CLK, PLL_ENET_MAIN_250M_CLK, + PLL_SYS_PFD0_392M_CLK, PLL_AUDIO_MAIN_CLK, PLL_SYS_PFD2_270M_CLK} + }, + {USB_HSIC_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_USB_MAIN_480M_CLK, + PLL_SYS_PFD3_CLK, PLL_SYS_PFD4_CLK, PLL_SYS_PFD5_CLK, + PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK} + }, + {PCIE_CTRL_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_250M_CLK, PLL_SYS_MAIN_240M_CLK, + PLL_SYS_PFD2_270M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD1_332M_CLK, PLL_SYS_PFD6_CLK} + }, + {PCIE_PHY_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_ENET_MAIN_500M_CLK, + EXT_CLK_1, EXT_CLK_2, EXT_CLK_3, + EXT_CLK_4, PLL_SYS_PFD0_392M_CLK} + }, + {EPDC_PIXEL_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD1_332M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD5_CLK, PLL_SYS_PFD6_CLK, + PLL_SYS_PFD7_CLK, PLL_VIDEO_MAIN_CLK} + }, + {LCDIF_PIXEL_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD5_CLK, PLL_DRAM_MAIN_533M_CLK, + EXT_CLK_3, PLL_SYS_PFD4_CLK, PLL_SYS_PFD2_270M_CLK, + PLL_VIDEO_MAIN_CLK, PLL_USB_MAIN_480M_CLK} + }, + {MIPI_DSI_EXTSER_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD5_CLK, PLL_SYS_PFD3_CLK, + PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD0_196M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_VIDEO_MAIN_CLK, PLL_AUDIO_MAIN_CLK} + }, + {MIPI_CSI_WARP_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD4_CLK, PLL_SYS_PFD3_CLK, + PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD0_196M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_VIDEO_MAIN_CLK, PLL_AUDIO_MAIN_CLK} + }, + {MIPI_DPHY_REF_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_SYS_PFD5_CLK, REF_1M_CLK, EXT_CLK_2, + PLL_VIDEO_MAIN_CLK, EXT_CLK_3} + }, + {SAI1_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD4_CLK, + PLL_ENET_MAIN_125M_CLK, EXT_CLK_2} + }, + {SAI2_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD4_CLK, + PLL_ENET_MAIN_125M_CLK, EXT_CLK_2} + }, + {SAI3_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD4_CLK, + PLL_ENET_MAIN_125M_CLK, EXT_CLK_3} + }, + {SPDIF_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD4_CLK, + PLL_ENET_MAIN_125M_CLK, EXT_CLK_3} + }, + {ENET1_REF_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_ENET_MAIN_50M_CLK, + PLL_ENET_MAIN_25M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_VIDEO_MAIN_CLK, EXT_CLK_4} + }, + {ENET1_TIME_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_AUDIO_MAIN_CLK, + EXT_CLK_1, EXT_CLK_2, EXT_CLK_3, + EXT_CLK_4, PLL_VIDEO_MAIN_CLK} + }, + {ENET2_REF_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_ENET_MAIN_50M_CLK, + PLL_ENET_MAIN_25M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_VIDEO_MAIN_CLK, EXT_CLK_4} + }, + {ENET2_TIME_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_AUDIO_MAIN_CLK, + EXT_CLK_1, EXT_CLK_2, EXT_CLK_3, + EXT_CLK_4, PLL_VIDEO_MAIN_CLK} + }, + {ENET_PHY_REF_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_25M_CLK, PLL_ENET_MAIN_50M_CLK, + PLL_ENET_MAIN_125M_CLK, PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_VIDEO_MAIN_CLK, PLL_SYS_PFD3_CLK} + }, + {EIM_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_SYS_PFD2_270M_CLK, PLL_SYS_PFD3_CLK, + PLL_ENET_MAIN_125M_CLK, PLL_USB_MAIN_480M_CLK} + }, + {NAND_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_SYS_PFD0_392M_CLK, PLL_SYS_PFD3_CLK, PLL_ENET_MAIN_500M_CLK, + PLL_ENET_MAIN_250M_CLK, PLL_VIDEO_MAIN_CLK} + }, + {QSPI_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD4_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD3_CLK, PLL_SYS_PFD2_270M_CLK, + PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK} + }, + {USDHC1_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD0_392M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD4_CLK, PLL_SYS_PFD2_270M_CLK, + PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK} + }, + {USDHC2_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD0_392M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD4_CLK, PLL_SYS_PFD2_270M_CLK, + PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK} + }, + {USDHC3_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD0_392M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD4_CLK, PLL_SYS_PFD2_270M_CLK, + PLL_SYS_PFD6_CLK, PLL_SYS_PFD7_CLK} + }, + {CAN1_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_SYS_MAIN_480M_CLK, PLL_ENET_MAIN_40M_CLK, PLL_USB_MAIN_480M_CLK, + EXT_CLK_1, EXT_CLK_4} + }, + {CAN2_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_SYS_MAIN_480M_CLK, PLL_ENET_MAIN_40M_CLK, PLL_USB_MAIN_480M_CLK, + EXT_CLK_1, EXT_CLK_3} + }, + {I2C1_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_ENET_MAIN_50M_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK, + PLL_USB_MAIN_480M_CLK, PLL_SYS_PFD2_135M_CLK} + }, + {I2C2_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_ENET_MAIN_50M_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK, + PLL_USB_MAIN_480M_CLK, PLL_SYS_PFD2_135M_CLK} + }, + {I2C3_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_ENET_MAIN_50M_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK, + PLL_USB_MAIN_480M_CLK, PLL_SYS_PFD2_135M_CLK} + }, + {I2C4_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_120M_CLK, PLL_ENET_MAIN_50M_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_AUDIO_MAIN_CLK, PLL_VIDEO_MAIN_CLK, + PLL_USB_MAIN_480M_CLK, PLL_SYS_PFD2_135M_CLK} + }, + {UART1_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK, + PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2, + EXT_CLK_4, PLL_USB_MAIN_480M_CLK} + }, + {UART2_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK, + PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2, + EXT_CLK_3, PLL_USB_MAIN_480M_CLK} + }, + {UART3_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK, + PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2, + EXT_CLK_4, PLL_USB_MAIN_480M_CLK} + }, + {UART4_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK, + PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2, + EXT_CLK_3, PLL_USB_MAIN_480M_CLK} + }, + {UART5_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK, + PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2, + EXT_CLK_4, PLL_USB_MAIN_480M_CLK} + }, + {UART6_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK, + PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2, + EXT_CLK_3, PLL_USB_MAIN_480M_CLK} + }, + {UART7_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK, + PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_480M_CLK, EXT_CLK_2, + EXT_CLK_4, PLL_USB_MAIN_480M_CLK} + }, + {ECSPI1_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK, + PLL_SYS_MAIN_120M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD4_CLK, + PLL_ENET_MAIN_250M_CLK, PLL_USB_MAIN_480M_CLK} + }, + {ECSPI2_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK, + PLL_SYS_MAIN_120M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD4_CLK, + PLL_ENET_MAIN_250M_CLK, PLL_USB_MAIN_480M_CLK} + }, + {ECSPI3_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK, + PLL_SYS_MAIN_120M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD4_CLK, + PLL_ENET_MAIN_250M_CLK, PLL_USB_MAIN_480M_CLK} + }, + {ECSPI4_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_ENET_MAIN_40M_CLK, + PLL_SYS_MAIN_120M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_SYS_PFD4_CLK, + PLL_ENET_MAIN_250M_CLK, PLL_USB_MAIN_480M_CLK} + }, + {PWM1_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_1, + REF_1M_CLK, PLL_VIDEO_MAIN_CLK} + }, + {PWM2_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_1, + REF_1M_CLK, PLL_VIDEO_MAIN_CLK} + }, + {PWM3_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_2, + REF_1M_CLK, PLL_VIDEO_MAIN_CLK} + }, + {PWM4_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_2, + REF_1M_CLK, PLL_VIDEO_MAIN_CLK} + }, + {FLEXTIMER1_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_3, + REF_1M_CLK, PLL_VIDEO_MAIN_CLK} + }, + {FLEXTIMER2_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_ENET_MAIN_40M_CLK, PLL_AUDIO_MAIN_CLK, EXT_CLK_3, + REF_1M_CLK, PLL_VIDEO_MAIN_CLK} + }, + {SIM1_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_USB_MAIN_480M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_ENET_MAIN_125M_CLK, PLL_SYS_PFD7_CLK} + }, + {SIM2_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_USB_MAIN_480M_CLK, PLL_VIDEO_MAIN_CLK, + PLL_ENET_MAIN_125M_CLK, PLL_SYS_PFD7_CLK} + }, + {GPT1_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_PFD0_392M_CLK, + PLL_ENET_MAIN_40M_CLK, PLL_VIDEO_MAIN_CLK, REF_1M_CLK, + PLL_AUDIO_MAIN_CLK, EXT_CLK_1} + }, + {GPT2_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_PFD0_392M_CLK, + PLL_ENET_MAIN_40M_CLK, PLL_VIDEO_MAIN_CLK, REF_1M_CLK, + PLL_AUDIO_MAIN_CLK, EXT_CLK_2} + }, + {GPT3_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_PFD0_392M_CLK, + PLL_ENET_MAIN_40M_CLK, PLL_VIDEO_MAIN_CLK, REF_1M_CLK, + PLL_AUDIO_MAIN_CLK, EXT_CLK_3} + }, + {GPT4_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_100M_CLK, PLL_SYS_PFD0_392M_CLK, + PLL_ENET_MAIN_40M_CLK, PLL_VIDEO_MAIN_CLK, REF_1M_CLK, + PLL_AUDIO_MAIN_CLK, EXT_CLK_4} + }, + {TRACE_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_USB_MAIN_480M_CLK, + EXT_CLK_1, EXT_CLK_3} + }, + {WDOG_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_USB_MAIN_480M_CLK, + REF_1M_CLK, PLL_SYS_PFD1_166M_CLK} + }, + {CSI_MCLK_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_VIDEO_MAIN_CLK, PLL_USB_MAIN_480M_CLK} + }, + {AUDIO_MCLK_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_PFD2_135M_CLK, PLL_SYS_MAIN_120M_CLK, + PLL_DRAM_MAIN_533M_CLK, PLL_ENET_MAIN_125M_CLK, PLL_AUDIO_MAIN_CLK, + PLL_VIDEO_MAIN_CLK, PLL_USB_MAIN_480M_CLK} + }, + {WRCLK_CLK_ROOT, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_ENET_MAIN_40M_CLK, PLL_DRAM_MAIN_533M_CLK, + PLL_USB_MAIN_480M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_SYS_PFD2_270M_CLK, + PLL_ENET_MAIN_500M_CLK, PLL_SYS_PFD7_CLK} + }, + {IPP_DO_CLKO1, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_480M_CLK, PLL_SYS_MAIN_240M_CLK, + PLL_SYS_PFD0_196M_CLK, PLL_SYS_PFD3_CLK, PLL_ENET_MAIN_500M_CLK, + PLL_DRAM_MAIN_533M_CLK, REF_1M_CLK} + }, + {IPP_DO_CLKO2, CCM_IP_CHANNEL, + {OSC_24M_CLK, PLL_SYS_MAIN_240M_CLK, PLL_SYS_PFD0_392M_CLK, + PLL_SYS_PFD1_166M_CLK, PLL_SYS_PFD4_CLK, PLL_AUDIO_MAIN_CLK, + PLL_VIDEO_MAIN_CLK, OSC_32K_CLK} + }, +}; + +/* select which entry of root_array */ +static int select(enum clk_root_index clock_id) +{ + int i, size; + struct clk_root_map *p = root_array; + + size = ARRAY_SIZE(root_array); + + for (i = 0; i < size; i++, p++) { + if (clock_id == p->entry) + return i; + } + + return -EINVAL; +} + +static int src_supported(int entry, enum clk_root_src clock_src) +{ + int i, size; + struct clk_root_map *p = &root_array[entry]; + + if ((p->type == CCM_DRAM_PHYM_CHANNEL) || (p->type == CCM_DRAM_CHANNEL)) + size = 2; + else + size = 8; + + for (i = 0; i < size; i++) { + if (p->src_mux[i] == clock_src) + return i; + } + + return -EINVAL; +} + +/* Set src for clock root slice. */ +int clock_set_src(enum clk_root_index clock_id, enum clk_root_src clock_src) +{ + int root_entry, src_entry; + u32 reg; + + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + root_entry = select(clock_id); + if (root_entry < 0) + return -EINVAL; + + src_entry = src_supported(root_entry, clock_src); + if (src_entry < 0) + return -EINVAL; + + reg = __raw_readl(&imx_ccm->root[clock_id].target_root); + reg &= ~CLK_ROOT_MUX_MASK; + reg |= src_entry << CLK_ROOT_MUX_SHIFT; + __raw_writel(reg, &imx_ccm->root[clock_id].target_root); + + return 0; +} + +/* Get src of a clock root slice. */ +int clock_get_src(enum clk_root_index clock_id, enum clk_root_src *p_clock_src) +{ + u32 val; + int root_entry; + struct clk_root_map *p; + + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + val = __raw_readl(&imx_ccm->root[clock_id].target_root); + val &= CLK_ROOT_MUX_MASK; + val >>= CLK_ROOT_MUX_SHIFT; + + root_entry = select(clock_id); + if (root_entry < 0) + return -EINVAL; + + p = &root_array[root_entry]; + *p_clock_src = p->src_mux[val]; + + return 0; +} + +int clock_set_prediv(enum clk_root_index clock_id, enum root_pre_div pre_div) +{ + int root_entry; + struct clk_root_map *p; + u32 reg; + + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + root_entry = select(clock_id); + if (root_entry < 0) + return -EINVAL; + + p = &root_array[root_entry]; + + if ((p->type == CCM_CORE_CHANNEL) || + (p->type == CCM_DRAM_PHYM_CHANNEL) || + (p->type == CCM_DRAM_CHANNEL)) { + if (pre_div != CLK_ROOT_PRE_DIV1) { + printf("Error pre div!\n"); + return -EINVAL; + } + } + + reg = __raw_readl(&imx_ccm->root[clock_id].target_root); + reg &= ~CLK_ROOT_PRE_DIV_MASK; + reg |= pre_div << CLK_ROOT_PRE_DIV_SHIFT; + __raw_writel(reg, &imx_ccm->root[clock_id].target_root); + + return 0; +} + +int clock_get_prediv(enum clk_root_index clock_id, enum root_pre_div *pre_div) +{ + u32 val; + int root_entry; + struct clk_root_map *p; + + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + root_entry = select(clock_id); + if (root_entry < 0) + return -EINVAL; + + p = &root_array[root_entry]; + + if ((p->type == CCM_CORE_CHANNEL) || + (p->type == CCM_DRAM_PHYM_CHANNEL) || + (p->type == CCM_DRAM_CHANNEL)) { + *pre_div = 0; + return 0; + } + + val = __raw_readl(&imx_ccm->root[clock_id].target_root); + val &= CLK_ROOT_PRE_DIV_MASK; + val >>= CLK_ROOT_PRE_DIV_SHIFT; + + *pre_div = val; + + return 0; +} + +int clock_set_postdiv(enum clk_root_index clock_id, enum root_post_div div) +{ + u32 reg; + + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + if (clock_id == DRAM_PHYM_CLK_ROOT) { + if (div != CLK_ROOT_POST_DIV1) { + printf("Error post div!\n"); + return -EINVAL; + } + } + + /* Only 3 bit post div. */ + if ((clock_id == DRAM_CLK_ROOT) && (div > CLK_ROOT_POST_DIV7)) { + printf("Error post div!\n"); + return -EINVAL; + } + + reg = __raw_readl(&imx_ccm->root[clock_id].target_root); + reg &= ~CLK_ROOT_POST_DIV_MASK; + reg |= div << CLK_ROOT_POST_DIV_SHIFT; + __raw_writel(reg, &imx_ccm->root[clock_id].target_root); + + return 0; +} + +int clock_get_postdiv(enum clk_root_index clock_id, enum root_post_div *div) +{ + u32 val; + + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + if (clock_id == DRAM_PHYM_CLK_ROOT) { + *div = 0; + return 0; + } + + val = __raw_readl(&imx_ccm->root[clock_id].target_root); + if (clock_id == DRAM_CLK_ROOT) + val &= DRAM_CLK_ROOT_POST_DIV_MASK; + else + val &= CLK_ROOT_POST_DIV_MASK; + val >>= CLK_ROOT_POST_DIV_SHIFT; + + *div = val; + + return 0; +} + +int clock_set_autopostdiv(enum clk_root_index clock_id, enum root_auto_div div, + int auto_en) +{ + u32 val; + int root_entry; + struct clk_root_map *p; + + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + root_entry = select(clock_id); + if (root_entry < 0) + return -EINVAL; + + p = &root_array[root_entry]; + + if ((p->type != CCM_BUS_CHANNEL) && (p->type != CCM_AHB_CHANNEL)) { + printf("Auto postdiv not supported.!\n"); + return -EINVAL; + } + + /* + * Each time only one filed can be changed, no use target_root_set. + */ + val = __raw_readl(&imx_ccm->root[clock_id].target_root); + val &= ~CLK_ROOT_AUTO_DIV_MASK; + val |= (div << CLK_ROOT_AUTO_DIV_SHIFT); + + if (auto_en) + val |= CLK_ROOT_AUTO_EN; + else + val &= ~CLK_ROOT_AUTO_EN; + + __raw_writel(val, &imx_ccm->root[clock_id].target_root); + + return 0; +} + +int clock_get_autopostdiv(enum clk_root_index clock_id, enum root_auto_div *div, + int *auto_en) +{ + u32 val; + int root_entry; + struct clk_root_map *p; + + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + root_entry = select(clock_id); + if (root_entry < 0) + return -EINVAL; + + p = &root_array[root_entry]; + + /* + * Only bus/ahb channel supports auto div. + * If unsupported, just set auto_en and div with 0. + */ + if ((p->type != CCM_BUS_CHANNEL) && (p->type != CCM_AHB_CHANNEL)) { + *auto_en = 0; + *div = 0; + return 0; + } + + val = __raw_readl(&imx_ccm->root[clock_id].target_root); + if ((val & CLK_ROOT_AUTO_EN_MASK) == 0) + *auto_en = 0; + else + *auto_en = 1; + + val &= CLK_ROOT_AUTO_DIV_MASK; + val >>= CLK_ROOT_AUTO_DIV_SHIFT; + + *div = val; + + return 0; +} + +int clock_get_target_val(enum clk_root_index clock_id, u32 *val) +{ + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + *val = __raw_readl(&imx_ccm->root[clock_id].target_root); + + return 0; +} + +int clock_set_target_val(enum clk_root_index clock_id, u32 val) +{ + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + __raw_writel(val, &imx_ccm->root[clock_id].target_root); + + return 0; +} + +/* Auto_div and auto_en is ignored, they are rarely used. */ +int clock_root_cfg(enum clk_root_index clock_id, enum root_pre_div pre_div, + enum root_post_div post_div, enum clk_root_src clock_src) +{ + u32 val; + int root_entry, src_entry; + struct clk_root_map *p; + + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + root_entry = select(clock_id); + if (root_entry < 0) + return -EINVAL; + + p = &root_array[root_entry]; + + if ((p->type == CCM_CORE_CHANNEL) || + (p->type == CCM_DRAM_PHYM_CHANNEL) || + (p->type == CCM_DRAM_CHANNEL)) { + if (pre_div != CLK_ROOT_PRE_DIV1) { + printf("Error pre div!\n"); + return -EINVAL; + } + } + + /* Only 3 bit post div. */ + if (p->type == CCM_DRAM_CHANNEL) { + if (post_div > CLK_ROOT_POST_DIV7) { + printf("Error post div!\n"); + return -EINVAL; + } + } + + if (p->type == CCM_DRAM_PHYM_CHANNEL) { + if (post_div != CLK_ROOT_POST_DIV1) { + printf("Error post div!\n"); + return -EINVAL; + } + } + + src_entry = src_supported(root_entry, clock_src); + if (src_entry < 0) + return -EINVAL; + + val = CLK_ROOT_ON | pre_div << CLK_ROOT_PRE_DIV_SHIFT | + post_div << CLK_ROOT_POST_DIV_SHIFT | + src_entry << CLK_ROOT_MUX_SHIFT; + + __raw_writel(val, &imx_ccm->root[clock_id].target_root); + + return 0; +} + +int clock_root_enabled(enum clk_root_index clock_id) +{ + u32 val; + + if (clock_id >= CLK_ROOT_MAX) + return -EINVAL; + + /* + * No enable bit for DRAM controller and PHY. Just return enabled. + */ + if ((clock_id == DRAM_PHYM_CLK_ROOT) || (clock_id == DRAM_CLK_ROOT)) + return 1; + + val = __raw_readl(&imx_ccm->root[clock_id].target_root); + + return (val & CLK_ROOT_ENABLE_MASK) ? 1 : 0; +} + +/* CCGR gate operation */ +int clock_enable(enum clk_ccgr_index index, bool enable) +{ + if (index >= CCGR_MAX) + return -EINVAL; + + if (enable) + __raw_writel(CCM_CLK_ON_MSK, + &imx_ccm->ccgr_array[index].ccgr_set); + else + __raw_writel(CCM_CLK_ON_MSK, + &imx_ccm->ccgr_array[index].ccgr_clr); + + return 0; +} diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c new file mode 100644 index 0000000000..2ed05ea4f9 --- /dev/null +++ b/arch/arm/cpu/armv7/mx7/soc.c @@ -0,0 +1,267 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/imx-common/boot_mode.h> +#include <asm/imx-common/dma.h> +#include <asm/arch/crm_regs.h> +#include <dm.h> +#include <imx_thermal.h> + +#if defined(CONFIG_IMX_THERMAL) +static const struct imx_thermal_plat imx7_thermal_plat = { + .regs = (void *)ANATOP_BASE_ADDR, + .fuse_bank = 3, + .fuse_word = 3, +}; + +U_BOOT_DEVICE(imx7_thermal) = { + .name = "imx_thermal", + .platdata = &imx7_thermal_plat, +}; +#endif + +/* + * OCOTP_TESTER3[9:8] (see Fusemap Description Table offset 0x440) + * defines a 2-bit SPEED_GRADING + */ +#define OCOTP_TESTER3_SPEED_SHIFT 8 +#define OCOTP_TESTER3_SPEED_800MHZ 0 +#define OCOTP_TESTER3_SPEED_850MHZ 1 +#define OCOTP_TESTER3_SPEED_1GHZ 2 + +u32 get_cpu_speed_grade_hz(void) +{ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[1]; + struct fuse_bank1_regs *fuse = + (struct fuse_bank1_regs *)bank->fuse_regs; + uint32_t val; + + val = readl(&fuse->tester3); + val >>= OCOTP_TESTER3_SPEED_SHIFT; + val &= 0x3; + + switch(val) { + case OCOTP_TESTER3_SPEED_800MHZ: + return 792000000; + case OCOTP_TESTER3_SPEED_850MHZ: + return 852000000; + case OCOTP_TESTER3_SPEED_1GHZ: + return 996000000; + } + return 0; +} + +/* + * OCOTP_TESTER3[7:6] (see Fusemap Description Table offset 0x440) + * defines a 2-bit SPEED_GRADING + */ +#define OCOTP_TESTER3_TEMP_SHIFT 6 + +u32 get_cpu_temp_grade(int *minc, int *maxc) +{ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[1]; + struct fuse_bank1_regs *fuse = + (struct fuse_bank1_regs *)bank->fuse_regs; + uint32_t val; + + val = readl(&fuse->tester3); + val >>= OCOTP_TESTER3_TEMP_SHIFT; + val &= 0x3; + + if (minc && maxc) { + if (val == TEMP_AUTOMOTIVE) { + *minc = -40; + *maxc = 125; + } else if (val == TEMP_INDUSTRIAL) { + *minc = -40; + *maxc = 105; + } else if (val == TEMP_EXTCOMMERCIAL) { + *minc = -20; + *maxc = 105; + } else { + *minc = 0; + *maxc = 95; + } + } + return val; +} + +u32 get_cpu_rev(void) +{ + struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *) + ANATOP_BASE_ADDR; + u32 reg = readl(&ccm_anatop->digprog); + u32 type = (reg >> 16) & 0xff; + + reg &= 0xff; + return (type << 12) | reg; +} + +#ifdef CONFIG_REVISION_TAG +u32 __weak get_board_rev(void) +{ + return get_cpu_rev(); +} +#endif + +int arch_cpu_init(void) +{ + init_aips(); + + /* Disable PDE bit of WMCR register */ + imx_set_wdog_powerdown(false); + +#ifdef CONFIG_APBH_DMA + /* Start APBH DMA */ + mxs_dma_init(); +#endif + + return 0; +} + +#ifdef CONFIG_SERIAL_TAG +void get_board_serial(struct tag_serialnr *serialnr) +{ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[0]; + struct fuse_bank0_regs *fuse = + (struct fuse_bank0_regs *)bank->fuse_regs; + + serialnr->low = fuse->tester0; + serialnr->high = fuse->tester1; +} +#endif + +#if defined(CONFIG_FEC_MXC) +void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) +{ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[9]; + struct fuse_bank9_regs *fuse = + (struct fuse_bank9_regs *)bank->fuse_regs; + + if (0 == dev_id) { + u32 value = readl(&fuse->mac_addr1); + mac[0] = (value >> 8); + mac[1] = value; + + value = readl(&fuse->mac_addr0); + mac[2] = value >> 24; + mac[3] = value >> 16; + mac[4] = value >> 8; + mac[5] = value; + } else { + u32 value = readl(&fuse->mac_addr2); + mac[0] = value >> 24; + mac[1] = value >> 16; + mac[2] = value >> 8; + mac[3] = value; + + value = readl(&fuse->mac_addr1); + mac[4] = value >> 24; + mac[5] = value >> 16; + } +} +#endif + +void set_wdog_reset(struct wdog_regs *wdog) +{ + u32 reg = readw(&wdog->wcr); + /* + * Output WDOG_B signal to reset external pmic or POR_B decided by + * the board desgin. Without external reset, the peripherals/DDR/ + * PMIC are not reset, that may cause system working abnormal. + */ + reg = readw(&wdog->wcr); + reg |= 1 << 3; + /* + * WDZST bit is write-once only bit. Align this bit in kernel, + * otherwise kernel code will have no chance to set this bit. + */ + reg |= 1 << 0; + writew(reg, &wdog->wcr); +} + +/* + * cfg_val will be used for + * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0] + * to SBMR1, which will determine the boot device. + */ +const struct boot_mode soc_boot_modes[] = { + {"ecspi1:0", MAKE_CFGVAL(0x00, 0x60, 0x00, 0x00)}, + {"ecspi1:1", MAKE_CFGVAL(0x40, 0x62, 0x00, 0x00)}, + {"ecspi1:2", MAKE_CFGVAL(0x80, 0x64, 0x00, 0x00)}, + {"ecspi1:3", MAKE_CFGVAL(0xc0, 0x66, 0x00, 0x00)}, + + {"weim", MAKE_CFGVAL(0x00, 0x50, 0x00, 0x00)}, + {"qspi1", MAKE_CFGVAL(0x10, 0x40, 0x00, 0x00)}, + /* 4 bit bus width */ + {"usdhc1", MAKE_CFGVAL(0x10, 0x10, 0x00, 0x00)}, + {"usdhc2", MAKE_CFGVAL(0x10, 0x14, 0x00, 0x00)}, + {"usdhc3", MAKE_CFGVAL(0x10, 0x18, 0x00, 0x00)}, + {"mmc1", MAKE_CFGVAL(0x10, 0x20, 0x00, 0x00)}, + {"mmc2", MAKE_CFGVAL(0x10, 0x24, 0x00, 0x00)}, + {"mmc3", MAKE_CFGVAL(0x10, 0x28, 0x00, 0x00)}, + {NULL, 0}, +}; + +enum boot_device get_boot_device(void) +{ + struct bootrom_sw_info **p = + (struct bootrom_sw_info **)ROM_SW_INFO_ADDR; + + enum boot_device boot_dev = SD1_BOOT; + u8 boot_type = (*p)->boot_dev_type; + u8 boot_instance = (*p)->boot_dev_instance; + + switch (boot_type) { + case BOOT_TYPE_SD: + boot_dev = boot_instance + SD1_BOOT; + break; + case BOOT_TYPE_MMC: + boot_dev = boot_instance + MMC1_BOOT; + break; + case BOOT_TYPE_NAND: + boot_dev = NAND_BOOT; + break; + case BOOT_TYPE_QSPI: + boot_dev = QSPI_BOOT; + break; + case BOOT_TYPE_WEIM: + boot_dev = WEIM_NOR_BOOT; + break; + case BOOT_TYPE_SPINOR: + boot_dev = SPI_NOR_BOOT; + break; + default: + break; + } + + return boot_dev; +} + +void s_init(void) +{ +#if !defined CONFIG_SPL_BUILD + /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */ + asm volatile( + "mrc p15, 0, r0, c1, c0, 1\n" + "orr r0, r0, #1 << 6\n" + "mcr p15, 0, r0, c1, c0, 1\n"); +#endif + /* clock configuration. */ + clock_init(); + + return; +} diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S index 30d81db8b8..31d1c9e348 100644 --- a/arch/arm/cpu/armv7/nonsec_virt.S +++ b/arch/arm/cpu/armv7/nonsec_virt.S @@ -53,6 +53,20 @@ _secure_monitor: bl psci_arch_init #endif +#ifdef CONFIG_ARM_ERRATA_773022 + mrc p15, 0, r5, c1, c0, 1 + orr r5, r5, #(1 << 1) + mcr p15, 0, r5, c1, c0, 1 + isb +#endif + +#ifdef CONFIG_ARM_ERRATA_774769 + mrc p15, 0, r5, c1, c0, 1 + orr r5, r5, #(1 << 25) + mcr p15, 0, r5, c1, c0, 1 + isb +#endif + mrc p15, 0, r5, c1, c1, 0 @ read SCR bic r5, r5, #0x4a @ clear IRQ, EA, nET bits orr r5, r5, #0x31 @ enable NS, AW, FW bits diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index f5b22f6a78..bf7bf262c7 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -294,8 +294,8 @@ static void dra7_ddr3_leveling(u32 base, const struct emif_regs *regs) EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR); /* Disable refreshed before leveling */ - clrsetbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_SHIFT, - EMIF_REG_INITREF_DIS_SHIFT); + clrsetbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK, + EMIF_REG_INITREF_DIS_MASK); /* Start Full leveling */ writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl); @@ -309,7 +309,7 @@ static void dra7_ddr3_leveling(u32 base, const struct emif_regs *regs) } /* Enable refreshes after leveling */ - clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_SHIFT); + clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK); debug("HW leveling success\n"); /* diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index cda38e1387..4fa72f7835 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -12,9 +12,6 @@ config TARGET_MT_VENTOUX bool "TeeJet Mt.Ventoux" select SUPPORT_SPL -config TARGET_OMAP3_SDP3430 - bool "TI OMAP3430 SDP" - config TARGET_OMAP3_BEAGLE bool "TI OMAP3 BeagleBoard" select SUPPORT_SPL @@ -79,9 +76,6 @@ config TARGET_ECO5PK bool "ECO5PK" select SUPPORT_SPL -config TARGET_DIG297 - bool "DIG297" - config TARGET_TRICORDER bool "Tricorder" select SUPPORT_SPL @@ -96,9 +90,6 @@ config TARGET_OMAP3_LOGIC select DM_SERIAL select DM_GPIO -config TARGET_OMAP3_MVBLX - bool "OMAP3 MVBLX" - config TARGET_NOKIA_RX51 bool "Nokia RX51" @@ -131,7 +122,6 @@ config SYS_SOC source "board/logicpd/am3517evm/Kconfig" source "board/teejet/mt_ventoux/Kconfig" -source "board/ti/sdp3430/Kconfig" source "board/ti/beagle/Kconfig" source "board/compulab/cm_t35/Kconfig" source "board/compulab/cm_t3517/Kconfig" @@ -143,11 +133,9 @@ source "board/logicpd/zoom1/Kconfig" source "board/ti/am3517crane/Kconfig" source "board/pandora/Kconfig" source "board/8dtech/eco5pk/Kconfig" -source "board/comelit/dig297/Kconfig" source "board/corscience/tricorder/Kconfig" source "board/htkw/mcx/Kconfig" source "board/logicpd/omap3som/Kconfig" -source "board/matrix_vision/mvblx/Kconfig" source "board/nokia/rx51/Kconfig" source "board/technexion/tao3530/Kconfig" source "board/technexion/twister/Kconfig" diff --git a/arch/arm/cpu/armv7/rmobile/Kconfig b/arch/arm/cpu/armv7/rmobile/Kconfig index ef56286715..85c06eb45f 100644 --- a/arch/arm/cpu/armv7/rmobile/Kconfig +++ b/arch/arm/cpu/armv7/rmobile/Kconfig @@ -40,6 +40,11 @@ config TARGET_PORTER select DM select DM_SERIAL +config TARGET_STOUT + bool "Stout board" + select DM + select DM_SERIAL + endchoice config SYS_SOC @@ -47,7 +52,7 @@ config SYS_SOC config RMOBILE_EXTRAM_BOOT bool "Enable boot from RAM" - depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER || TARGET_PORTER || TARGET_SILK + depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER || TARGET_PORTER || TARGET_SILK || TARGET_STOUT default n choice @@ -80,5 +85,6 @@ source "board/kmc/kzm9g/Kconfig" source "board/renesas/alt/Kconfig" source "board/renesas/silk/Kconfig" source "board/renesas/porter/Kconfig" +source "board/renesas/stout/Kconfig" endif diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index b40198b36e..d11365b65b 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -21,6 +21,7 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/gpio.h> +#include <asm/arch/spl.h> #include <asm/arch/sys_proto.h> #include <asm/arch/timer.h> #include <asm/arch/tzpc.h> @@ -152,7 +153,7 @@ u32 spl_boot_device(void) * binary over USB. If it is found, it determines where SPL was * read from. */ - if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) /* eGON.BT0 */ + if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */ return BOOT_DEVICE_BOARD; /* The BROM will try to boot from mmc0 first, so try that first. */ @@ -198,11 +199,6 @@ void board_init_f(ulong dummy) i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); #endif sunxi_board_init(); - - /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - - board_init_r(NULL, 0); } #endif diff --git a/arch/arm/cpu/armv7/u8500/Makefile b/arch/arm/cpu/armv7/u8500/Makefile deleted file mode 100644 index fad9d4ae3a..0000000000 --- a/arch/arm/cpu/armv7/u8500/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := timer.o clock.o prcmu.o cpu.o -obj-y += lowlevel.o diff --git a/arch/arm/cpu/armv7/u8500/clock.c b/arch/arm/cpu/armv7/u8500/clock.c deleted file mode 100644 index 1e3b3d5205..0000000000 --- a/arch/arm/cpu/armv7/u8500/clock.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * (C) Copyright 2009 ST-Ericsson - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> - -DECLARE_GLOBAL_DATA_PTR; - -struct clkrst { - unsigned int pcken; - unsigned int pckdis; - unsigned int kcken; - unsigned int kckdis; -}; - -static unsigned int clkrst_base[] = { - U8500_CLKRST1_BASE, - U8500_CLKRST2_BASE, - U8500_CLKRST3_BASE, - 0, - U8500_CLKRST5_BASE, - U8500_CLKRST6_BASE, - U8500_CLKRST7_BASE, /* ED only */ -}; - -/* Turn on peripheral clock at PRCC level */ -void u8500_clock_enable(int periph, int cluster, int kern) -{ - struct clkrst *clkrst = (struct clkrst *) clkrst_base[periph - 1]; - - if (kern != -1) - writel(1 << kern, &clkrst->kcken); - - if (cluster != -1) - writel(1 << cluster, &clkrst->pcken); -} - -void db8500_clocks_init(void) -{ - /* - * Enable all clocks. This is u-boot, we can enable it all. There is no - * powersave in u-boot. - */ - - u8500_clock_enable(1, 9, -1); /* GPIO0 */ - u8500_clock_enable(2, 11, -1);/* GPIO1 */ - u8500_clock_enable(3, 8, -1); /* GPIO2 */ - u8500_clock_enable(5, 1, -1); /* GPIO3 */ - u8500_clock_enable(3, 6, 6); /* UART2 */ - u8500_clock_enable(3, 3, 3); /* I2C0 */ - u8500_clock_enable(1, 5, 5); /* SDI0 */ - u8500_clock_enable(2, 4, 2); /* SDI4 */ - u8500_clock_enable(6, 6, -1); /* MTU0 */ - u8500_clock_enable(3, 4, 4); /* SDI2 */ - - /* - * Enabling clocks for all devices which are AMBA devices in the - * kernel. Otherwise they will not get probe()'d because the - * peripheral ID register will not be powered. - */ - - /* XXX: some of these differ between ED/V1 */ - - u8500_clock_enable(1, 1, 1); /* UART1 */ - u8500_clock_enable(1, 0, 0); /* UART0 */ - u8500_clock_enable(3, 2, 2); /* SSP1 */ - u8500_clock_enable(3, 1, 1); /* SSP0 */ - u8500_clock_enable(2, 8, -1); /* SPI0 */ - u8500_clock_enable(2, 5, 3); /* MSP2 */ -} diff --git a/arch/arm/cpu/armv7/u8500/cpu.c b/arch/arm/cpu/armv7/u8500/cpu.c deleted file mode 100644 index d8634bebbd..0000000000 --- a/arch/arm/cpu/armv7/u8500/cpu.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Copyright (C) 2012 Linaro Limited - * Mathieu Poirier <mathieu.poirier@linaro.org> - * - * Based on original code from Joakim Axelsson at ST-Ericsson - * (C) Copyright 2010 ST-Ericsson - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/prcmu.h> -#include <asm/arch/clock.h> -#include <asm/arch/hardware.h> - -#include <asm/arch/hardware.h> - -#define CPUID_DB8500V1 0x411fc091 -#define CPUID_DB8500V2 0x412fc091 -#define ASICID_DB8500V11 0x008500A1 - -#define CACHE_CONTR_BASE 0xA0412000 -/* Cache controller register offsets - * as found in ARM's technical reference manual - */ -#define CACHE_INVAL_BY_WAY (CACHE_CONTR_BASE + 0x77C) -#define CACHE_LOCKDOWN_BY_D (CACHE_CONTR_BASE + 0X900) -#define CACHE_LOCKDOWN_BY_I (CACHE_CONTR_BASE + 0X904) - -static unsigned int read_asicid(void); - -static inline unsigned int read_cpuid(void) -{ - unsigned int val; - - /* Main ID register (MIDR) */ - asm("mrc p15, 0, %0, c0, c0, 0" - : "=r" (val) - : - : "cc"); - - return val; -} - -static int cpu_is_u8500v11(void) -{ - return read_asicid() == ASICID_DB8500V11; -} - -static int cpu_is_u8500v2(void) -{ - return read_cpuid() == CPUID_DB8500V2; -} - -static unsigned int read_asicid(void) -{ - unsigned int *address; - - if (cpu_is_u8500v2()) - address = (void *) U8500_ASIC_ID_LOC_V2; - else - address = (void *) U8500_ASIC_ID_LOC_ED_V1; - - return readl(address); -} - -void cpu_cache_initialization(void) -{ - unsigned int value; - /* invalidate all cache entries */ - writel(0xFFFF, CACHE_INVAL_BY_WAY); - - /* ways are set to '0' when they are totally - * cleaned and invalidated - */ - do { - value = readl(CACHE_INVAL_BY_WAY); - } while (value & 0xFF); - - /* Invalidate register 9 D and I lockdown */ - writel(0xFF, CACHE_LOCKDOWN_BY_D); - writel(0xFF, CACHE_LOCKDOWN_BY_I); -} - -#ifdef CONFIG_ARCH_CPU_INIT -/* - * SOC specific cpu init - */ -int arch_cpu_init(void) -{ - db8500_prcmu_init(); - db8500_clocks_init(); - - return 0; -} -#endif /* CONFIG_ARCH_CPU_INIT */ - -#ifdef CONFIG_MMC - -int u8500_mmc_power_init(void) -{ - int ret; - int enable, voltage; - int ab8500_revision; - - if (!cpu_is_u8500v11() && !cpu_is_u8500v2()) - return 0; - - /* Get AB8500 revision */ - ret = ab8500_read(AB8500_MISC, AB8500_REV_REG); - if (ret < 0) - goto out; - - ab8500_revision = ret; - - /* - * On v1.1 HREF boards (HREF+), Vaux3 needs to be enabled for the SD - * card to work. This is done by enabling the regulators in the AB8500 - * via PRCMU I2C transactions. - * - * This code is derived from the handling of AB8500_LDO_VAUX3 in - * ab8500_ldo_enable() and ab8500_ldo_disable() in Linux. - * - * Turn off and delay is required to have it work across soft reboots. - */ - - /* Turn off (read-modify-write) */ - ret = ab8500_read(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_REGU_REG); - if (ret < 0) - goto out; - - enable = ret; - - /* Turn off */ - ret = ab8500_write(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_REGU_REG, - enable & ~LDO_VAUX3_ENABLE_MASK); - if (ret < 0) - goto out; - - udelay(10 * 1000); - - /* Set the voltage to 2.91 V or 2.9 V without overriding VRF1 value */ - ret = ab8500_read(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_SEL_REG); - if (ret < 0) - goto out; - - voltage = ret; - - if (ab8500_revision < 0x20) { - voltage &= ~LDO_VAUX3_SEL_MASK; - voltage |= LDO_VAUX3_SEL_2V9; - } else { - voltage &= ~LDO_VAUX3_V2_SEL_MASK; - voltage |= LDO_VAUX3_V2_SEL_2V91; - } - - ret = ab8500_write(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_SEL_REG, voltage); - if (ret < 0) - goto out; - - /* Turn on the supply */ - enable &= ~LDO_VAUX3_ENABLE_MASK; - enable |= LDO_VAUX3_ENABLE_VAL; - - ret = ab8500_write(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_REGU_REG, enable); - -out: - return ret; -} -#endif /* CONFIG_MMC */ diff --git a/arch/arm/cpu/armv7/u8500/lowlevel.S b/arch/arm/cpu/armv7/u8500/lowlevel.S deleted file mode 100644 index d3e3920601..0000000000 --- a/arch/arm/cpu/armv7/u8500/lowlevel.S +++ /dev/null @@ -1,21 +0,0 @@ -/* - * (C) Copyright 2011 ST-Ericsson - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <linux/linkage.h> - -ENTRY(lowlevel_init) - mov pc, lr -ENDPROC(lowlevel_init) - - .align 5 -ENTRY(reset_cpu) - ldr r0, =CFG_PRCMU_BASE - ldr r1, =0x1 - str r1, [r0, #0x228] -_loop_forever: - b _loop_forever -ENDPROC(reset_cpu) diff --git a/arch/arm/cpu/armv7/u8500/prcmu.c b/arch/arm/cpu/armv7/u8500/prcmu.c deleted file mode 100644 index 26ffdc2e02..0000000000 --- a/arch/arm/cpu/armv7/u8500/prcmu.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson SA - * - * Adapted from the Linux version: - * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * NOTE: This currently does not support the I2C workaround access method. - */ - -#include <common.h> -#include <config.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/types.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/arch/prcmu.h> - -/* CPU mailbox registers */ -#define PRCMU_I2C_WRITE(slave) \ - (((slave) << 1) | I2CWRITE | (1 << 6)) -#define PRCMU_I2C_READ(slave) \ - (((slave) << 1) | I2CREAD | (1 << 6)) - -#define I2C_MBOX_BIT (1 << 5) - -static int prcmu_is_ready(void) -{ - int ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE; - if (!ready) - printf("PRCMU firmware not ready\n"); - return ready; -} - -static int wait_for_i2c_mbx_rdy(void) -{ - int timeout = 10000; - - if (readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) { - printf("prcmu: warning i2c mailbox was not acked\n"); - /* clear mailbox 5 ack irq */ - writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); - } - - /* check any already on-going transaction */ - while ((readl(PRCM_MBOX_CPU_VAL) & I2C_MBOX_BIT) && timeout) - timeout--; - - if (timeout == 0) - return -1; - - return 0; -} - -static int wait_for_i2c_req_done(void) -{ - int timeout = 10000; - - /* Set an interrupt to XP70 */ - writel(I2C_MBOX_BIT, PRCM_MBOX_CPU_SET); - - /* wait for mailbox 5 (i2c) ack */ - while (!(readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) && timeout) - timeout--; - - if (timeout == 0) - return -1; - - return 0; -} - -/** - * prcmu_i2c_read - PRCMU - 4500 communication using PRCMU I2C - * @reg: - db8500 register bank to be accessed - * @slave: - db8500 register to be accessed - * Returns: ACK_MB5 value containing the status - */ -int prcmu_i2c_read(u8 reg, u16 slave) -{ - uint8_t i2c_status; - uint8_t i2c_val; - int ret; - - if (!prcmu_is_ready()) - return -1; - - debug("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n", - reg, slave); - - ret = wait_for_i2c_mbx_rdy(); - if (ret) { - printf("prcmu_i2c_read: mailbox became not ready\n"); - return ret; - } - - /* prepare the data for mailbox 5 */ - writeb(PRCMU_I2C_READ(reg), PRCM_REQ_MB5_I2COPTYPE_REG); - writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); - writeb(slave, PRCM_REQ_MB5_I2CSLAVE); - writeb(0, PRCM_REQ_MB5_I2CVAL); - - ret = wait_for_i2c_req_done(); - if (ret) { - printf("prcmu_i2c_read: mailbox request timed out\n"); - return ret; - } - - /* retrieve values */ - debug("ack-mb5:transfer status = %x\n", - readb(PRCM_ACK_MB5_STATUS)); - debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); - debug("ack-mb5:slave_add = %x\n", - readb(PRCM_ACK_MB5_SLAVE)); - debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); - - i2c_status = readb(PRCM_ACK_MB5_STATUS); - i2c_val = readb(PRCM_ACK_MB5_VAL); - /* clear mailbox 5 ack irq */ - writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); - - if (i2c_status == I2C_RD_OK) - return i2c_val; - - printf("prcmu_i2c_read:read return status= %d\n", i2c_status); - return -1; -} - -/** - * prcmu_i2c_write - PRCMU-db8500 communication using PRCMU I2C - * @reg: - db8500 register bank to be accessed - * @slave: - db800 register to be written to - * @reg_data: - the data to write - * Returns: ACK_MB5 value containing the status - */ -int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data) -{ - uint8_t i2c_status; - int ret; - - if (!prcmu_is_ready()) - return -1; - - debug("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n", - reg, slave); - - ret = wait_for_i2c_mbx_rdy(); - if (ret) { - printf("prcmu_i2c_write: mailbox became not ready\n"); - return ret; - } - - /* prepare the data for mailbox 5 */ - writeb(PRCMU_I2C_WRITE(reg), PRCM_REQ_MB5_I2COPTYPE_REG); - writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); - writeb(slave, PRCM_REQ_MB5_I2CSLAVE); - writeb(reg_data, PRCM_REQ_MB5_I2CVAL); - - ret = wait_for_i2c_req_done(); - if (ret) { - printf("prcmu_i2c_write: mailbox request timed out\n"); - return ret; - } - - /* retrieve values */ - debug("ack-mb5:transfer status = %x\n", - readb(PRCM_ACK_MB5_STATUS)); - debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); - debug("ack-mb5:slave_add = %x\n", - readb(PRCM_ACK_MB5_SLAVE)); - debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); - - i2c_status = readb(PRCM_ACK_MB5_STATUS); - debug("\ni2c_status = %x\n", i2c_status); - /* clear mailbox 5 ack irq */ - writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); - - if (i2c_status == I2C_WR_OK) - return 0; - - printf("%s: i2c_status : 0x%x\n", __func__, i2c_status); - return -1; -} - -void u8500_prcmu_enable(u32 *reg) -{ - writel(readl(reg) | (1 << 8), reg); -} - -void db8500_prcmu_init(void) -{ - /* Enable timers */ - writel(1 << 17, PRCM_TCR); - - u8500_prcmu_enable((u32 *)PRCM_PER1CLK_MGT_REG); - u8500_prcmu_enable((u32 *)PRCM_PER2CLK_MGT_REG); - u8500_prcmu_enable((u32 *)PRCM_PER3CLK_MGT_REG); - /* PER4CLK does not exist */ - u8500_prcmu_enable((u32 *)PRCM_PER5CLK_MGT_REG); - u8500_prcmu_enable((u32 *)PRCM_PER6CLK_MGT_REG); - /* Only exists in ED but is always ok to write to */ - u8500_prcmu_enable((u32 *)PRCM_PER7CLK_MGT_REG); - - u8500_prcmu_enable((u32 *)PRCM_UARTCLK_MGT_REG); - u8500_prcmu_enable((u32 *)PRCM_I2CCLK_MGT_REG); - - u8500_prcmu_enable((u32 *)PRCM_SDMMCCLK_MGT_REG); - - /* Clean up the mailbox interrupts after pre-u-boot code. */ - writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); -} diff --git a/arch/arm/cpu/armv7/u8500/timer.c b/arch/arm/cpu/armv7/u8500/timer.c deleted file mode 100644 index 6b74e13d9c..0000000000 --- a/arch/arm/cpu/armv7/u8500/timer.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (C) 2010 Linaro Limited - * John Rigby <john.rigby@linaro.org> - * - * Based on original from Linux kernel source and - * internal ST-Ericsson U-Boot source. - * (C) Copyright 2009 Alessandro Rubini - * (C) Copyright 2010 ST-Ericsson - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * The MTU device has some interrupt control registers - * followed by 4 timers. - */ - -/* The timers */ -struct u8500_mtu_timer { - u32 lr; /* Load value */ - u32 cv; /* Current value */ - u32 cr; /* Control reg */ - u32 bglr; /* ??? */ -}; - -/* The MTU that contains the timers */ -struct u8500_mtu { - u32 imsc; /* Interrupt mask set/clear */ - u32 ris; /* Raw interrupt status */ - u32 mis; /* Masked interrupt status */ - u32 icr; /* Interrupt clear register */ - struct u8500_mtu_timer pt[4]; -}; - -/* bits for the control register */ -#define MTU_CR_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR */ -#define MTU_CR_32BITS 0x02 - -#define MTU_CR_PRESCALE_1 0x00 -#define MTU_CR_PRESCALE_16 0x04 -#define MTU_CR_PRESCALE_256 0x08 -#define MTU_CR_PRESCALE_MASK 0x0c - -#define MTU_CR_PERIODIC 0x40 /* if 0 = free-running */ -#define MTU_CR_ENA 0x80 - -/* - * The MTU is clocked at 133 MHz by default. (V1 and later) - */ -#define TIMER_CLOCK (133 * 1000 * 1000 / 16) -#define COUNT_TO_USEC(x) ((x) * 16 / 133) -#define USEC_TO_COUNT(x) ((x) * 133 / 16) -#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) -#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) -#define TIMER_LOAD_VAL 0xffffffff - -/* - * MTU timer to use (from 0 to 3). - */ -#define MTU_TIMER 2 - -static struct u8500_mtu_timer *timer_base = - &((struct u8500_mtu *)U8500_MTU0_BASE_V1)->pt[MTU_TIMER]; - -/* macro to read the 32 bit timer: since it decrements, we invert read value */ -#define READ_TIMER() (~readl(&timer_base->cv)) - -/* Configure a free-running, auto-wrap counter with /16 prescaler */ -int timer_init(void) -{ - writel(MTU_CR_ENA | MTU_CR_PRESCALE_16 | MTU_CR_32BITS, - &timer_base->cr); - return 0; -} - -ulong get_timer_masked(void) -{ - /* current tick value */ - ulong now = TICKS_TO_HZ(READ_TIMER()); - - if (now >= gd->arch.lastinc) { /* normal (non rollover) */ - gd->arch.tbl += (now - gd->arch.lastinc); - } else { /* rollover */ - gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) - - gd->arch.lastinc) + now; - } - gd->arch.lastinc = now; - return gd->arch.tbl; -} - -/* Delay x useconds */ -void __udelay(ulong usec) -{ - long tmo = usec * (TIMER_CLOCK / 1000) / 1000; - ulong now, last = READ_TIMER(); - - while (tmo > 0) { - now = READ_TIMER(); - if (now > last) /* normal (non rollover) */ - tmo -= now - last; - else /* rollover */ - tmo -= TIMER_LOAD_VAL - last + now; - last = now; - } -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -/* - * Emulation of Power architecture long long timebase. - * - * TODO: Support gd->arch.tbu for real long long timebase. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * Emulation of Power architecture timebase. - * NB: Low resolution compared to Power tbclk. - */ -ulong get_tbclk(void) -{ - return CONFIG_SYS_HZ; -} diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index e70bed462a..da45d984d0 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -54,8 +54,10 @@ reset: orr x0, x0, #0xf /* SCR_EL3.NS|IRQ|FIQ|EA */ msr scr_el3, x0 msr cptr_el3, xzr /* Enable FP/SIMD */ +#ifdef COUNTER_FREQUENCY ldr x0, =COUNTER_FREQUENCY msr cntfrq_el0, x0 /* Initialize CNTFRQ */ +#endif b 0f 2: msr vbar_el2, x0 mov x0, #0x33ff diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f2e18a5654..65b42308f2 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -39,13 +39,17 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra124-venice2.dtb \ tegra210-e2220-1170.dtb \ tegra210-p2371-0000.dtb \ + tegra210-p2371-2180.dtb \ tegra210-p2571.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-ld4-ref.dtb \ uniphier-ph1-ld6b-ref.dtb \ uniphier-ph1-pro4-ref.dtb \ + uniphier-ph1-pro5-4kbox.dtb \ uniphier-ph1-sld3-ref.dtb \ - uniphier-ph1-sld8-ref.dtb + uniphier-ph1-sld8-ref.dtb \ + uniphier-proxstream2-gentil.dtb \ + uniphier-proxstream2-vodka.dtb dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ zynq-zc706.dtb \ zynq-zed.dtb \ @@ -81,9 +85,11 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-gemei-g9.dtb \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ + sun4i-a10-inet1.dtb \ sun4i-a10-inet-3f.dtb \ sun4i-a10-inet-3w.dtb \ sun4i-a10-inet97fv2.dtb \ + sun4i-a10-inet9f-rev03.dtb \ sun4i-a10-itead-iteaduino-plus.dtb \ sun4i-a10-jesurun-q5.dtb \ sun4i-a10-marsboard.dtb \ @@ -91,13 +97,15 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-mk802.dtb \ sun4i-a10-mk802ii.dtb \ sun4i-a10-olinuxino-lime.dtb \ - sun4i-a10-pcduino.dtb + sun4i-a10-pcduino.dtb \ + sun4i-a10-pov-protab2-ips9.dtb dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ sun5i-a10s-mk802.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ + sun5i-a10s-wobo-i5.dtb \ sun5i-a13-ampe-a76.dtb \ sun5i-a13-forfun-q88db.dtb \ sun5i-a13-hsg-h702.dtb \ @@ -105,6 +113,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-inet-98v-rev2.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-q8-tablet.dtb \ sun5i-a13-tzx-q8-713b7.dtb \ sun5i-a13-utoo-p66.dtb dtb-$(CONFIG_MACH_SUN6I) += \ @@ -144,11 +153,13 @@ dtb-$(CONFIG_MACH_SUN8I_A23) += \ sun8i-a23-evb.dtb \ sun8i-a23-gt90h-v4.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ - sun8i-a23-ippo-q8h-v1.2.dtb + sun8i-a23-ippo-q8h-v1.2.dtb \ + sun8i-a23-q8-tablet.dtb dtb-$(CONFIG_MACH_SUN8I_A33) += \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ sun8i-a33-ippo-q8h-v1.2.dtb \ + sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ diff --git a/arch/arm/dts/exynos4210-trats.dts b/arch/arm/dts/exynos4210-trats.dts index 36d02df3b0..f3fac80190 100644 --- a/arch/arm/dts/exynos4210-trats.dts +++ b/arch/arm/dts/exynos4210-trats.dts @@ -117,4 +117,8 @@ sdhci@12540000 { status = "disabled"; }; + + dwmmc@12550000 { + status = "disabled"; + }; }; diff --git a/arch/arm/dts/ls1021a-twr.dts b/arch/arm/dts/ls1021a-twr.dts index 0e61c07c5a..6ccd33279b 100644 --- a/arch/arm/dts/ls1021a-twr.dts +++ b/arch/arm/dts/ls1021a-twr.dts @@ -17,6 +17,7 @@ enet0_sgmii_phy = &sgmii_phy2; enet1_sgmii_phy = &sgmii_phy0; spi0 = &qspi; + spi1 = &dspi1; }; }; @@ -33,6 +34,21 @@ }; }; +&dspi1 { + bus-num = <0>; + status = "okay"; + + dspiflash: at26df081a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-inet1.dts b/arch/arm/dts/sun4i-a10-inet1.dts new file mode 100644 index 0000000000..487ce63519 --- /dev/null +++ b/arch/arm/dts/sun4i-a10-inet1.dts @@ -0,0 +1,226 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "iNet-1"; + compatible = "inet-tek,inet1", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* Accelerometer */ + bma250@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@1000 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <1200000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts new file mode 100644 index 0000000000..8446465ed6 --- /dev/null +++ b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts @@ -0,0 +1,219 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "iNet-9F Rev 03"; + compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <200000>; + }; + + button@600 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <600000>; + }; + + button@800 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <800000>; + }; + + button@1000 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1200000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts new file mode 100644 index 0000000000..223515efed --- /dev/null +++ b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts @@ -0,0 +1,209 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Point of View Protab2-IPS9"; + compatible = "pov,protab2-ips9", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@400 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <400000>; + }; + + button@800 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <800000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + /* + * We need to always power the camera sensor, otherwhise all access + * to i2c1 is blocked. + */ + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vdd-csi"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/dts/sun5i-a10s-wobo-i5.dts new file mode 100644 index 0000000000..9fea918f94 --- /dev/null +++ b/arch/arm/dts/sun5i-a10s-wobo-i5.dts @@ -0,0 +1,224 @@ +/* + * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "A10s-Wobo i5"; + compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_wobo_i5>; + + blue { + label = "a10s-wobo-i5:blue:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_emac_3v3: emac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&emac_power_pin_wobo>; + regulator-name = "emac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_b>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + led_pins_wobo_i5: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 { + allwinner,pins = "PB3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + emac_power_pin_wobo: emac_power_pin@0 { + allwinner,pins = "PA02"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb1_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PG12"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun5i-a10s.dtsi b/arch/arm/dts/sun5i-a10s.dtsi index f11efb722b..4173e1e597 100644 --- a/arch/arm/dts/sun5i-a10s.dtsi +++ b/arch/arm/dts/sun5i-a10s.dtsi @@ -194,6 +194,17 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + emac_pins_b: emac0@1 { + allwinner,pins = "PD6", "PD7", "PD10", + "PD11", "PD12", "PD13", "PD14", + "PD15", "PD18", "PD19", "PD20", + "PD21", "PD22", "PD23", "PD24", + "PD25", "PD26", "PD27"; + allwinner,function = "emac"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc1_pins_a: mmc1@0 { allwinner,pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; diff --git a/arch/arm/dts/sun5i-a13-q8-tablet.dts b/arch/arm/dts/sun5i-a13-q8-tablet.dts new file mode 100644 index 0000000000..72e93acb5a --- /dev/null +++ b/arch/arm/dts/sun5i-a13-q8-tablet.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sun5i-q8-common.dtsi" + +/ { + model = "Q8 A13 Tablet"; + compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&usbphy { + usb1_vbus-supply = <®_ldo3>; +}; diff --git a/arch/arm/dts/sun5i-q8-common.dtsi b/arch/arm/dts/sun5i-q8-common.dtsi new file mode 100644 index 0000000000..0641d68a6d --- /dev/null +++ b/arch/arm/dts/sun5i-q8-common.dtsi @@ -0,0 +1,170 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-q8-common.dtsi" + +/ { + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +&i2c1 { + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +#include "axp209.dtsi" + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_q8: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-a23-q8-tablet.dts b/arch/arm/dts/sun8i-a23-q8-tablet.dts new file mode 100644 index 0000000000..6062ea7a99 --- /dev/null +++ b/arch/arm/dts/sun8i-a23-q8-tablet.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A23 Tablet"; + compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-a33-q8-tablet.dts b/arch/arm/dts/sun8i-a33-q8-tablet.dts new file mode 100644 index 0000000000..44b32296a0 --- /dev/null +++ b/arch/arm/dts/sun8i-a33-q8-tablet.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A33 Tablet"; + compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-q8-common.dtsi b/arch/arm/dts/sun8i-q8-common.dtsi new file mode 100644 index 0000000000..07cd268a4b --- /dev/null +++ b/arch/arm/dts/sun8i-q8-common.dtsi @@ -0,0 +1,84 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-q8-common.dtsi" + +/ { + aliases { + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + bl_en_pin_q8: bl_en_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_q8: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/dts/sunxi-q8-common.dtsi b/arch/arm/dts/sunxi-q8-common.dtsi new file mode 100644 index 0000000000..17b26ffd03 --- /dev/null +++ b/arch/arm/dts/sunxi-q8-common.dtsi @@ -0,0 +1,77 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sunxi-common-regulators.dtsi" + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi index b8c8a92301..e68d7be478 100644 --- a/arch/arm/dts/tegra20.dtsi +++ b/arch/arm/dts/tegra20.dtsi @@ -320,6 +320,63 @@ clocks = <&tegra_car 47>, <&tegra_car 124>; }; + spi@7000d400 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d400 0x200>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SBC1>; + resets = <&tegra_car 41>; + reset-names = "spi"; + dmas = <&apbdma 15>, <&apbdma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d600 0x200>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SBC2>; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d800 0x200>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SBC3>; + resets = <&tegra_car 46>; + reset-names = "spi"; + dmas = <&apbdma 17>, <&apbdma 17>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000da00 0x200>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SBC4>; + resets = <&tegra_car 68>; + reset-names = "spi"; + dmas = <&apbdma 18>, <&apbdma 18>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + kbc@7000e200 { compatible = "nvidia,tegra20-kbc"; reg = <0x7000e200 0x0078>; diff --git a/arch/arm/dts/tegra210-p2371-2180.dts b/arch/arm/dts/tegra210-p2371-2180.dts new file mode 100644 index 0000000000..5d9adcff31 --- /dev/null +++ b/arch/arm/dts/tegra210-p2371-2180.dts @@ -0,0 +1,60 @@ +/dts-v1/; + +#include "tegra210.dtsi" + +/ { + model = "NVIDIA P2371-2180"; + compatible = "nvidia,p2371-2180", "nvidia,tegra210"; + + chosen { + stdout-path = &uarta; + }; + + aliases { + i2c0 = "/i2c@0,7000d000"; + sdhci0 = "/sdhci@0,700b0600"; + sdhci1 = "/sdhci@0,700b0000"; + usb0 = "/usb@0,7d000000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0xc0000000>; + }; + + sdhci@0,700b0000 { + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_LOW>; + bus-width = <4>; + }; + + sdhci@0,700b0600 { + status = "okay"; + bus-width = <8>; + }; + + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + }; + + usb@0,7d000000 { + status = "okay"; + dr_mode = "otg"; + nvidia,vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts index 20f2e9a7d2..9d697c1c88 100644 --- a/arch/arm/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts @@ -61,6 +61,20 @@ }; /* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts index 58dc20e602..bd86f09326 100644 --- a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts @@ -3,6 +3,7 @@ * * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> * + * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; @@ -54,6 +55,20 @@ }; /* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts index ec1117d4a2..a825069638 100644 --- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts @@ -68,6 +68,20 @@ }; /* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts new file mode 100644 index 0000000000..912bc27bea --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts @@ -0,0 +1,64 @@ +/* + * Device Tree Source for UniPhier PH1-Pro5 4KBOX Board (EVB-Pro5-4KBOX-M-V0) + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro5.dtsi" + +/ { + model = "UniPhier PH1-Pro5 4KBOX Board"; + compatible = "socionext,ph1-pro5-4kbox", "socionext,ph1-pro5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS1,115200"; + stdout-path = &serial1; + }; + + aliases { + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +/* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + +&serial1 { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart1 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts index 6269f9afd3..2cfcaff54a 100644 --- a/arch/arm/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts @@ -65,6 +65,20 @@ }; /* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-pinctrl.dtsi b/arch/arm/dts/uniphier-pinctrl.dtsi index f67445f4f1..b58421396d 100644 --- a/arch/arm/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/dts/uniphier-pinctrl.dtsi @@ -3,43 +3,7 @@ * * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: GPL-2.0+ X11 */ &pinctrl { diff --git a/arch/arm/dts/uniphier-proxstream2-gentil.dts b/arch/arm/dts/uniphier-proxstream2-gentil.dts new file mode 100644 index 0000000000..81d2385bf9 --- /dev/null +++ b/arch/arm/dts/uniphier-proxstream2-gentil.dts @@ -0,0 +1,62 @@ +/* + * Device Tree Source for UniPhier ProXstream2 Gentil Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-proxstream2.dtsi" + +/ { + model = "UniPhier ProXstream2 Gentil Board"; + compatible = "socionext,proxstream2-gentil", "socionext,proxstream2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttyS2,115200"; + stdout-path = &serial2; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +/* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + +&serial2 { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart2 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/uniphier-proxstream2-vodka.dts b/arch/arm/dts/uniphier-proxstream2-vodka.dts new file mode 100644 index 0000000000..fba7b742ca --- /dev/null +++ b/arch/arm/dts/uniphier-proxstream2-vodka.dts @@ -0,0 +1,62 @@ +/* + * Device Tree Source for UniPhier ProXstream2 Vodka Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-proxstream2.dtsi" + +/ { + model = "UniPhier ProXstream2 Vodka Board"; + compatible = "socionext,proxstream2-vodka", "socionext,proxstream2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttyS2,115200"; + stdout-path = &serial2; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +/* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + +&serial2 { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart2 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile index b9f1ca4da9..1698d061e7 100644 --- a/arch/arm/imx-common/Makefile +++ b/arch/arm/imx-common/Makefile @@ -7,7 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 vf610)) +ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 mx7 vf610)) obj-y = iomux-v3.o endif ifeq ($(SOC),$(filter $(SOC),mx5 mx6)) @@ -18,7 +18,13 @@ ifeq ($(SOC),$(filter $(SOC),mx6 mxs)) obj-y += misc.o obj-$(CONFIG_SPL_BUILD) += spl.o endif -ifeq ($(SOC),$(filter $(SOC),mx6)) +ifeq ($(SOC),$(filter $(SOC),mx7)) +obj-y += cpu.o +obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o +obj-$(CONFIG_SYSCOUNTER_TIMER) += syscounter.o +endif +ifeq ($(SOC),$(filter $(SOC),mx6 mx7)) +obj-y += cache.o init.o obj-$(CONFIG_CMD_SATA) += sata.o obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o endif diff --git a/arch/arm/imx-common/cache.c b/arch/arm/imx-common/cache.c new file mode 100644 index 0000000000..54b021cfed --- /dev/null +++ b/arch/arm/imx-common/cache.c @@ -0,0 +1,103 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/armv7.h> +#include <asm/pl310.h> +#include <asm/io.h> + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ +#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) + enum dcache_option option = DCACHE_WRITETHROUGH; +#else + enum dcache_option option = DCACHE_WRITEBACK; +#endif + /* Avoid random hang when download by usb */ + invalidate_dcache_all(); + + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); + + /* Enable caching on OCRAM and ROM */ + mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR, + ROMCP_ARB_END_ADDR, + option); + mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR, + IRAM_SIZE, + option); +} +#endif + +#ifndef CONFIG_SYS_L2CACHE_OFF +#ifdef CONFIG_SYS_L2_PL310 +#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002 +void v7_outer_cache_enable(void) +{ + struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE; + unsigned int val; + + + /* + * Set bit 22 in the auxiliary control register. If this bit + * is cleared, PL310 treats Normal Shared Non-cacheable + * accesses as Cacheable no-allocate. + */ + setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE); + +#if defined CONFIG_MX6SL + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + val = readl(&iomux->gpr[11]); + if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) { + /* L2 cache configured as OCRAM, reset it */ + val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM; + writel(val, &iomux->gpr[11]); + } +#endif + + /* Must disable the L2 before changing the latency parameters */ + clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); + + writel(0x132, &pl310->pl310_tag_latency_ctrl); + writel(0x132, &pl310->pl310_data_latency_ctrl); + + val = readl(&pl310->pl310_prefetch_ctrl); + + /* Turn on the L2 I/D prefetch */ + val |= 0x30000000; + + /* + * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 + * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 + * But according to ARM PL310 errata: 752271 + * ID: 752271: Double linefill feature can cause data corruption + * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 + * Workaround: The only workaround to this erratum is to disable the + * double linefill feature. This is the default behavior. + */ + +#ifndef CONFIG_MX6Q + val |= 0x40800000; +#endif + writel(val, &pl310->pl310_prefetch_ctrl); + + val = readl(&pl310->pl310_power_ctrl); + val |= L2X0_DYNAMIC_CLK_GATING_EN; + val |= L2X0_STNDBY_MODE_EN; + writel(val, &pl310->pl310_power_ctrl); + + setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); +} + +void v7_outer_cache_disable(void) +{ + struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE; + + clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); +} +#endif /* !CONFIG_SYS_L2_PL310 */ +#endif /* !CONFIG_SYS_L2CACHE_OFF */ diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index e27546c906..d3d1fc5afa 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -46,13 +46,28 @@ static char *get_reset_cause(void) case 0x00008: return "IPP USER"; case 0x00010: +#ifdef CONFIG_MX7 + return "WDOG1"; +#else return "WDOG"; +#endif case 0x00020: return "JTAG HIGH-Z"; case 0x00040: return "JTAG SW"; + case 0x00080: + return "WDOG3"; +#ifdef CONFIG_MX7 + case 0x00100: + return "WDOG4"; + case 0x00200: + return "TEMPSENSE"; +#else + case 0x00100: + return "TEMPSENSE"; case 0x10000: return "WARM BOOT"; +#endif default: return "unknown reset"; } @@ -122,6 +137,8 @@ unsigned imx_ddr_size(void) const char *get_imx_type(u32 imxtype) { switch (imxtype) { + case MXC_CPU_MX7D: + return "7D"; /* Dual-core version of the mx7 */ case MXC_CPU_MX6QP: return "6QP"; /* Quad-Plus version of the mx6 */ case MXC_CPU_MX6DP: @@ -154,14 +171,12 @@ int print_cpuinfo(void) u32 cpurev; __maybe_unused u32 max_freq; -#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) + cpurev = get_cpu_rev(); + +#if defined(CONFIG_IMX_THERMAL) struct udevice *thermal_dev; int cpu_tmp, minc, maxc, ret; -#endif - - cpurev = get_cpu_rev(); -#if defined(CONFIG_MX6) printf("CPU: Freescale i.MX%s rev%d.%d", get_imx_type((cpurev & 0xFF000) >> 12), (cpurev & 0x000F0) >> 4, @@ -181,7 +196,7 @@ int print_cpuinfo(void) mxc_get_clock(MXC_ARM_CLK) / 1000000); #endif -#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) +#if defined(CONFIG_IMX_THERMAL) puts("CPU: "); switch (get_cpu_temp_grade(&minc, &maxc)) { case TEMP_AUTOMOTIVE: @@ -205,9 +220,9 @@ int print_cpuinfo(void) if (!ret) printf(" at %dC\n", cpu_tmp); else - puts(" - invalid sensor data\n"); + debug(" - invalid sensor data\n"); } else { - puts(" - invalid sensor device\n"); + debug(" - invalid sensor device\n"); } #endif @@ -238,6 +253,7 @@ int cpu_mmc_init(bd_t *bis) } #endif +#ifndef CONFIG_MX7 u32 get_ahb_clk(void) { struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; @@ -249,6 +265,7 @@ u32 get_ahb_clk(void) return get_periph_clk() / (ahb_podf + 1); } +#endif void arch_preboot_os(void) { diff --git a/arch/arm/imx-common/ddrmc-vf610.c b/arch/arm/imx-common/ddrmc-vf610.c index e46263144d..daf3c7ebfa 100644 --- a/arch/arm/imx-common/ddrmc-vf610.c +++ b/arch/arm/imx-common/ddrmc-vf610.c @@ -12,9 +12,9 @@ #include <asm/arch/iomux-vf610.h> #include <asm/arch/ddrmc-vf610.h> -void ddrmc_setup_iomux(void) +void ddrmc_setup_iomux(const iomux_v3_cfg_t *pads, int pads_count) { - static const iomux_v3_cfg_t ddr_pads[] = { + static const iomux_v3_cfg_t default_pads[] = { VF610_PAD_DDR_A15__DDR_A_15, VF610_PAD_DDR_A14__DDR_A_14, VF610_PAD_DDR_A13__DDR_A_13, @@ -65,76 +65,54 @@ void ddrmc_setup_iomux(void) VF610_PAD_DDR_RESETB, }; - imx_iomux_v3_setup_multiple_pads(ddr_pads, ARRAY_SIZE(ddr_pads)); -} + if ((pads == NULL) || (pads_count == 0)) { + pads = default_pads; + pads_count = ARRAY_SIZE(default_pads); + } -void ddrmc_phy_init(void) -{ - struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR; + imx_iomux_v3_setup_multiple_pads(pads, pads_count); +} - writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[0]); - writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[16]); - writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[32]); +static struct ddrmc_phy_setting default_phy_settings[] = { + { DDRMC_PHY_DQ_TIMING, 0 }, + { DDRMC_PHY_DQ_TIMING, 16 }, + { DDRMC_PHY_DQ_TIMING, 32 }, - writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[1]); - writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[17]); + { DDRMC_PHY_DQS_TIMING, 1 }, + { DDRMC_PHY_DQS_TIMING, 17 }, - writel(DDRMC_PHY_CTRL, &ddrmr->phy[2]); - writel(DDRMC_PHY_CTRL, &ddrmr->phy[18]); - writel(DDRMC_PHY_CTRL, &ddrmr->phy[34]); + { DDRMC_PHY_CTRL, 2 }, + { DDRMC_PHY_CTRL, 18 }, + { DDRMC_PHY_CTRL, 34 }, - writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[3]); - writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[19]); - writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[35]); + { DDRMC_PHY_MASTER_CTRL, 3 }, + { DDRMC_PHY_MASTER_CTRL, 19 }, + { DDRMC_PHY_MASTER_CTRL, 35 }, - writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[4]); - writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[20]); - writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[36]); + { DDRMC_PHY_SLAVE_CTRL, 4 }, + { DDRMC_PHY_SLAVE_CTRL, 20 }, + { DDRMC_PHY_SLAVE_CTRL, 36 }, /* LPDDR2 only parameter */ - writel(DDRMC_PHY_OFF, &ddrmr->phy[49]); + { DDRMC_PHY_OFF, 49 }, - writel(DDRMC_PHY50_DDR3_MODE | - DDRMC_PHY50_EN_SW_HALF_CYCLE, &ddrmr->phy[50]); + { DDRMC_PHY50_DDR3_MODE | DDRMC_PHY50_EN_SW_HALF_CYCLE, 50 }, /* Processor Pad ODT settings */ - writel(DDRMC_PHY_PROC_PAD_ODT, &ddrmr->phy[52]); -} - -static void ddrmc_ctrl_lvl_init(struct ddrmc_lvl_info *lvl) -{ - struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR; - u32 cr102 = 0, cr105 = 0, cr106 = 0, cr110 = 0; + { DDRMC_PHY_PROC_PAD_ODT, 52 }, - if (lvl->wrlvl_reg_en) { - writel(DDRMC_CR97_WRLVL_EN, &ddrmr->cr[97]); - writel(DDRMC_CR98_WRLVL_DL_0(lvl->wrlvl_dl_0), &ddrmr->cr[98]); - writel(DDRMC_CR99_WRLVL_DL_1(lvl->wrlvl_dl_1), &ddrmr->cr[99]); - } - - if (lvl->rdlvl_reg_en) { - cr102 |= DDRMC_CR102_RDLVL_REG_EN; - cr105 |= DDRMC_CR105_RDLVL_DL_0(lvl->rdlvl_dl_0); - cr110 |= DDRMC_CR110_RDLVL_DL_1(lvl->rdlvl_dl_1); - } - - if (lvl->rdlvl_gt_reg_en) { - cr102 |= DDRMC_CR102_RDLVL_GT_REGEN; - cr106 |= DDRMC_CR106_RDLVL_GTDL_0(lvl->rdlvl_gt_dl_0); - cr110 |= DDRMC_CR110_RDLVL_GTDL_1(lvl->rdlvl_gt_dl_1); - } - - writel(cr102, &ddrmr->cr[102]); - writel(cr105, &ddrmr->cr[105]); - writel(cr106, &ddrmr->cr[106]); - writel(cr110, &ddrmr->cr[110]); -} + /* end marker */ + { 0, -1 } +}; void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings, - struct ddrmc_lvl_info *lvl, - int col_diff, int row_diff) + struct ddrmc_cr_setting *board_cr_settings, + struct ddrmc_phy_setting *board_phy_settings, + int col_diff, int row_diff) { struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR; + struct ddrmc_cr_setting *cr_setting; + struct ddrmc_phy_setting *phy_setting; writel(DDRMC_CR00_DRAM_CLASS_DDR3, &ddrmr->cr[0]); writel(DDRMC_CR02_DRAM_TINIT(timings->tinit), &ddrmr->cr[2]); @@ -144,7 +122,9 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings, writel(DDRMC_CR12_WRLAT(timings->wrlat) | DDRMC_CR12_CASLAT_LIN(timings->caslat_lin), &ddrmr->cr[12]); writel(DDRMC_CR13_TRC(timings->trc) | DDRMC_CR13_TRRD(timings->trrd) | - DDRMC_CR13_TCCD(timings->tccd), &ddrmr->cr[13]); + DDRMC_CR13_TCCD(timings->tccd) | + DDRMC_CR13_TBST_INT_INTERVAL(timings->tbst_int_interval), + &ddrmr->cr[13]); writel(DDRMC_CR14_TFAW(timings->tfaw) | DDRMC_CR14_TRP(timings->trp) | DDRMC_CR14_TWTR(timings->twtr) | DDRMC_CR14_TRAS_MIN(timings->tras_min), &ddrmr->cr[14]); @@ -156,18 +136,19 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings, DDRMC_CR18_TCKE(timings->tcke), &ddrmr->cr[18]); writel(DDRMC_CR20_AP_EN, &ddrmr->cr[20]); - writel(DDRMC_CR21_TRCD_INT(timings->trcd_int) | - DDRMC_CR21_CCMAP_EN, &ddrmr->cr[21]); + writel(DDRMC_CR21_TRCD_INT(timings->trcd_int) | DDRMC_CR21_CCMAP_EN | + DDRMC_CR21_TRAS_LOCKOUT(timings->tras_lockout), + &ddrmr->cr[21]); writel(DDRMC_CR22_TDAL(timings->tdal), &ddrmr->cr[22]); - writel(DDRMC_CR23_BSTLEN(3) | + writel(DDRMC_CR23_BSTLEN(timings->bstlen) | DDRMC_CR23_TDLL(timings->tdll), &ddrmr->cr[23]); writel(DDRMC_CR24_TRP_AB(timings->trp_ab), &ddrmr->cr[24]); writel(DDRMC_CR25_TREF_EN, &ddrmr->cr[25]); writel(DDRMC_CR26_TREF(timings->tref) | DDRMC_CR26_TRFC(timings->trfc), &ddrmr->cr[26]); - writel(DDRMC_CR28_TREF_INT(0), &ddrmr->cr[28]); + writel(DDRMC_CR28_TREF_INT(timings->tref_int), &ddrmr->cr[28]); writel(DDRMC_CR29_TPDEX(timings->tpdex), &ddrmr->cr[29]); writel(DDRMC_CR30_TXPDLL(timings->txpdll), &ddrmr->cr[30]); @@ -177,7 +158,7 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings, writel(DDRMC_CR34_CKSRX(timings->cksrx) | DDRMC_CR34_CKSRE(timings->cksre), &ddrmr->cr[34]); - writel(DDRMC_CR38_FREQ_CHG_EN(0), &ddrmr->cr[38]); + writel(DDRMC_CR38_FREQ_CHG_EN(timings->freq_chg_en), &ddrmr->cr[38]); writel(DDRMC_CR39_PHY_INI_COM(1024) | DDRMC_CR39_PHY_INI_STA(16) | DDRMC_CR39_FRQ_CH_DLLOFF(2), &ddrmr->cr[39]); @@ -191,13 +172,14 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings, writel(DDRMC_CR69_ZQ_ON_SREF_EX(2), &ddrmr->cr[69]); writel(DDRMC_CR70_REF_PER_ZQ(timings->ref_per_zq), &ddrmr->cr[70]); - writel(DDRMC_CR72_ZQCS_ROTATE(0), &ddrmr->cr[72]); + writel(DDRMC_CR72_ZQCS_ROTATE(timings->zqcs_rotate), &ddrmr->cr[72]); writel(DDRMC_CR73_APREBIT(timings->aprebit) | DDRMC_CR73_COL_DIFF(col_diff) | DDRMC_CR73_ROW_DIFF(row_diff), &ddrmr->cr[73]); writel(DDRMC_CR74_BANKSPLT_EN | DDRMC_CR74_ADDR_CMP_EN | - DDRMC_CR74_CMD_AGE_CNT(64) | DDRMC_CR74_AGE_CNT(64), + DDRMC_CR74_CMD_AGE_CNT(timings->cmd_age_cnt) | + DDRMC_CR74_AGE_CNT(timings->age_cnt), &ddrmr->cr[74]); writel(DDRMC_CR75_RW_PG_EN | DDRMC_CR75_RW_EN | DDRMC_CR75_PRI_EN | DDRMC_CR75_PLEN, &ddrmr->cr[75]); @@ -205,13 +187,15 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings, DDRMC_CR76_W2R_SPLT_EN, &ddrmr->cr[76]); writel(DDRMC_CR77_CS_MAP | DDRMC_CR77_DI_RD_INTLEAVE | DDRMC_CR77_SWAP_EN, &ddrmr->cr[77]); - writel(DDRMC_CR78_Q_FULLNESS(7) | + writel(DDRMC_CR78_Q_FULLNESS(timings->q_fullness) | DDRMC_CR78_BUR_ON_FLY_BIT(12), &ddrmr->cr[78]); writel(DDRMC_CR79_CTLUPD_AREF(0), &ddrmr->cr[79]); writel(DDRMC_CR82_INT_MASK, &ddrmr->cr[82]); - writel(DDRMC_CR87_ODT_WR_MAPCS0, &ddrmr->cr[87]); + writel(DDRMC_CR87_ODT_RD_MAPCS0(timings->odt_rd_mapcs0) | + DDRMC_CR87_ODT_WR_MAPCS0(timings->odt_wr_mapcs0), + &ddrmr->cr[87]); writel(DDRMC_CR88_TODTL_CMD(4), &ddrmr->cr[88]); writel(DDRMC_CR89_AODT_RWSMCS(2), &ddrmr->cr[89]); @@ -219,58 +203,33 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings, writel(DDRMC_CR96_WLMRD(timings->wlmrd) | DDRMC_CR96_WLDQSEN(timings->wldqsen), &ddrmr->cr[96]); - if (lvl != NULL) - ddrmc_ctrl_lvl_init(lvl); - - writel(DDRMC_CR117_AXI0_W_PRI(0) | - DDRMC_CR117_AXI0_R_PRI(0), &ddrmr->cr[117]); - writel(DDRMC_CR118_AXI1_W_PRI(1) | - DDRMC_CR118_AXI1_R_PRI(1), &ddrmr->cr[118]); - - writel(DDRMC_CR120_AXI0_PRI1_RPRI(2) | - DDRMC_CR120_AXI0_PRI0_RPRI(2), &ddrmr->cr[120]); - writel(DDRMC_CR121_AXI0_PRI3_RPRI(2) | - DDRMC_CR121_AXI0_PRI2_RPRI(2), &ddrmr->cr[121]); - writel(DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) | - DDRMC_CR122_AXI0_PRIRLX(100), &ddrmr->cr[122]); - writel(DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) | - DDRMC_CR123_AXI1_PRI2_RPRI(1), &ddrmr->cr[123]); - writel(DDRMC_CR124_AXI1_PRIRLX(100), &ddrmr->cr[124]); - - writel(DDRMC_CR126_PHY_RDLAT(8), &ddrmr->cr[126]); - writel(DDRMC_CR132_WRLAT_ADJ(5) | - DDRMC_CR132_RDLAT_ADJ(6), &ddrmr->cr[132]); - writel(DDRMC_CR137_PHYCTL_DL(2), &ddrmr->cr[137]); - writel(DDRMC_CR138_PHY_WRLV_MXDL(256) | - DDRMC_CR138_PHYDRAM_CK_EN(1), &ddrmr->cr[138]); - writel(DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) | - DDRMC_CR139_PHY_WRLV_DLL(3) | - DDRMC_CR139_PHY_WRLV_EN(3), &ddrmr->cr[139]); - writel(DDRMC_CR140_PHY_WRLV_WW(64), &ddrmr->cr[140]); - writel(DDRMC_CR143_RDLV_GAT_MXDL(1536) | - DDRMC_CR143_RDLV_MXDL(128), &ddrmr->cr[143]); - writel(DDRMC_CR144_PHY_RDLVL_RES(4) | DDRMC_CR144_PHY_RDLV_LOAD(7) | - DDRMC_CR144_PHY_RDLV_DLL(3) | - DDRMC_CR144_PHY_RDLV_EN(3), &ddrmr->cr[144]); - writel(DDRMC_CR145_PHY_RDLV_RR(64), &ddrmr->cr[145]); - writel(DDRMC_CR146_PHY_RDLVL_RESP(64), &ddrmr->cr[146]); - writel(DDRMC_CR147_RDLV_RESP_MASK(983040), &ddrmr->cr[147]); - writel(DDRMC_CR148_RDLV_GATE_RESP_MASK(983040), &ddrmr->cr[148]); - writel(DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(1) | - DDRMC_CR151_RDLVL_DQ_ZERO_CNT(1), &ddrmr->cr[151]); - - writel(DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) | - DDRMC_CR154_PAD_ZQ_MODE(1) | - DDRMC_CR154_DDR_SEL_PAD_CONTR(3) | - DDRMC_CR154_PAD_ZQ_HW_FOR(1), &ddrmr->cr[154]); - writel(DDRMC_CR155_PAD_ODT_BYTE1(2) | - DDRMC_CR155_PAD_ODT_BYTE0(2), &ddrmr->cr[155]); - writel(DDRMC_CR158_TWR(6), &ddrmr->cr[158]); - writel(DDRMC_CR161_ODT_EN(1) | DDRMC_CR161_TODTH_RD(2) | - DDRMC_CR161_TODTH_WR(2), &ddrmr->cr[161]); - - ddrmc_phy_init(); + /* execute custom CR setting sequence (may be NULL) */ + cr_setting = board_cr_settings; + if (cr_setting != NULL) + while (cr_setting->cr_rnum >= 0) { + writel(cr_setting->setting, + &ddrmr->cr[cr_setting->cr_rnum]); + cr_setting++; + } + + /* perform default PHY settings (may be overriden by custom settings */ + phy_setting = default_phy_settings; + while (phy_setting->phy_rnum >= 0) { + writel(phy_setting->setting, + &ddrmr->phy[phy_setting->phy_rnum]); + phy_setting++; + } + + /* execute custom PHY setting sequence (may be NULL) */ + phy_setting = board_phy_settings; + if (phy_setting != NULL) + while (phy_setting->phy_rnum >= 0) { + writel(phy_setting->setting, + &ddrmr->phy[phy_setting->phy_rnum]); + phy_setting++; + } + /* all inits done, start the DDR controller */ writel(DDRMC_CR00_DRAM_CLASS_DDR3 | DDRMC_CR00_START, &ddrmr->cr[0]); while (!(readl(&ddrmr->cr[80]) && 0x100)) diff --git a/arch/arm/imx-common/init.c b/arch/arm/imx-common/init.c new file mode 100644 index 0000000000..15dab1d904 --- /dev/null +++ b/arch/arm/imx-common/init.c @@ -0,0 +1,118 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/imx-common/boot_mode.h> +#include <asm/arch/crm_regs.h> + +void init_aips(void) +{ + struct aipstz_regs *aips1, *aips2, *aips3; + + aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR; + aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR; + aips3 = (struct aipstz_regs *)AIPS3_BASE_ADDR; + + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + writel(0x77777777, &aips1->mprot0); + writel(0x77777777, &aips1->mprot1); + writel(0x77777777, &aips2->mprot0); + writel(0x77777777, &aips2->mprot1); + + /* + * Set all OPACRx to be non-bufferable, not require + * supervisor privilege level for access,allow for + * write access and untrusted master access. + */ + writel(0x00000000, &aips1->opacr0); + writel(0x00000000, &aips1->opacr1); + writel(0x00000000, &aips1->opacr2); + writel(0x00000000, &aips1->opacr3); + writel(0x00000000, &aips1->opacr4); + writel(0x00000000, &aips2->opacr0); + writel(0x00000000, &aips2->opacr1); + writel(0x00000000, &aips2->opacr2); + writel(0x00000000, &aips2->opacr3); + writel(0x00000000, &aips2->opacr4); + + if (is_cpu_type(MXC_CPU_MX6SX) || is_soc_type(MXC_SOC_MX7)) { + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + writel(0x77777777, &aips3->mprot0); + writel(0x77777777, &aips3->mprot1); + + /* + * Set all OPACRx to be non-bufferable, not require + * supervisor privilege level for access,allow for + * write access and untrusted master access. + */ + writel(0x00000000, &aips3->opacr0); + writel(0x00000000, &aips3->opacr1); + writel(0x00000000, &aips3->opacr2); + writel(0x00000000, &aips3->opacr3); + writel(0x00000000, &aips3->opacr4); + } +} + +void imx_set_wdog_powerdown(bool enable) +{ + struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR; + struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR; + struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR; +#ifdef CONFIG_MX7D + struct wdog_regs *wdog4 = (struct wdog_regs *)WDOG4_BASE_ADDR; +#endif + + /* Write to the PDE (Power Down Enable) bit */ + writew(enable, &wdog1->wmcr); + writew(enable, &wdog2->wmcr); + + if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) || + is_soc_type(MXC_SOC_MX7)) + writew(enable, &wdog3->wmcr); +#ifdef CONFIG_MX7D + writew(enable, &wdog4->wmcr); +#endif +} + +#define SRC_SCR_WARM_RESET_ENABLE 0 + +void init_src(void) +{ + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + u32 val; + + /* + * force warm reset sources to generate cold reset + * for a more reliable restart + */ + val = readl(&src_regs->scr); + val &= ~(1 << SRC_SCR_WARM_RESET_ENABLE); + writel(val, &src_regs->scr); +} + +#ifdef CONFIG_CMD_BMODE +void boot_mode_apply(unsigned cfg_val) +{ + unsigned reg; + struct src *psrc = (struct src *)SRC_BASE_ADDR; + writel(cfg_val, &psrc->gpr9); + reg = readl(&psrc->gpr10); + if (cfg_val) + reg |= 1 << 28; + else + reg &= ~(1 << 28); + writel(reg, &psrc->gpr10); +} +#endif diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c index b4f481fa53..228d5f8f1c 100644 --- a/arch/arm/imx-common/iomux-v3.c +++ b/arch/arm/imx-common/iomux-v3.c @@ -11,10 +11,8 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#if !defined(CONFIG_MX25) && !defined(CONFIG_VF610) -#include <asm/arch/sys_proto.h> -#endif #include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/sys_proto.h> static void *base = (void *)IOMUXC_BASE_ADDR; @@ -53,7 +51,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) } #endif - if (mux_ctrl_ofs) + if (is_soc_type(MXC_SOC_MX7) || mux_ctrl_ofs) __raw_writel(mux_mode, base + mux_ctrl_ofs); if (sel_input_ofs) diff --git a/arch/arm/imx-common/syscounter.c b/arch/arm/imx-common/syscounter.c new file mode 100644 index 0000000000..e00fef2665 --- /dev/null +++ b/arch/arm/imx-common/syscounter.c @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * The file use ls102xa/timer.c as a reference. + */ + +#include <common.h> +#include <asm/io.h> +#include <div64.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> +#include <asm/imx-common/syscounter.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * This function is intended for SHORT delays only. + * It will overflow at around 10 seconds @ 400MHz, + * or 20 seconds @ 200MHz. + */ +unsigned long usec2ticks(unsigned long usec) +{ + ulong ticks; + + if (usec < 1000) + ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000; + else + ticks = ((usec / 10) * (get_tbclk() / 100000)); + + return ticks; +} + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + unsigned long freq; + + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq)); + + tick *= CONFIG_SYS_HZ; + do_div(tick, freq); + + return tick; +} + +static inline unsigned long long us_to_tick(unsigned long long usec) +{ + unsigned long freq; + + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq)); + + usec = usec * freq + 999999; + do_div(usec, 1000000); + + return usec; +} + +int timer_init(void) +{ + struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR; + unsigned long val, freq; + + freq = CONFIG_SC_TIMER_CLK; + asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); + + writel(freq, &sctr->cntfid0); + + /* Enable system counter */ + val = readl(&sctr->cntcr); + val &= ~(SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1); + val |= SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG; + writel(val, &sctr->cntcr); + + gd->arch.tbl = 0; + gd->arch.tbu = 0; + + return 0; +} + +unsigned long long get_ticks(void) +{ + unsigned long long now; + + asm("mrrc p15, 0, %Q0, %R0, c14" : "=r" (now)); + + gd->arch.tbl = (unsigned long)(now & 0xffffffff); + gd->arch.tbu = (unsigned long)(now >> 32); + + return now; +} + +ulong get_timer_masked(void) +{ + return tick_to_time(get_ticks()); +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void __udelay(unsigned long usec) +{ + unsigned long long tmp; + ulong tmo; + + tmo = us_to_tick(usec); + tmp = get_ticks() + tmo; /* get current timestamp */ + + while (get_ticks() < tmp) /* loop till event */ + /*NOP*/; +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + unsigned long freq; + + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq)); + + return freq; +} diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 13a9cad238..112ac5eacd 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -17,7 +17,6 @@ #include <asm/arch/hardware.h> -#define BIT(x) (1 << x) #define CL_BIT(x) (0 << x) /* Timer register bits */ diff --git a/arch/arm/include/asm/arch-hi6220/gpio.h b/arch/arm/include/asm/arch-hi6220/gpio.h index 98122a2f70..4fafaef5d5 100644 --- a/arch/arm/include/asm/arch-hi6220/gpio.h +++ b/arch/arm/include/asm/arch-hi6220/gpio.h @@ -11,8 +11,6 @@ #define HI6220_GPIO_BASE(bank) (((bank < 4) ? 0xf8011000 : \ 0xf7020000 - 0x4000) + (0x1000 * bank)) -#define BIT(x) (1 << (x)) - #define HI6220_GPIO_PER_BANK 8 #define HI6220_GPIO_DIR 0x400 diff --git a/arch/arm/include/asm/arch-hi6220/hi6220.h b/arch/arm/include/asm/arch-hi6220/hi6220.h index 4b987c2c83..3a12c75eee 100644 --- a/arch/arm/include/asm/arch-hi6220/hi6220.h +++ b/arch/arm/include/asm/arch-hi6220/hi6220.h @@ -13,6 +13,9 @@ #define HI6220_MMC0_BASE 0xF723D000 #define HI6220_MMC1_BASE 0xF723E000 +#define HI6220_UART0_BASE 0xF8015000 +#define HI6220_UART3_BASE 0xF7113000 + #define HI6220_PMUSSI_BASE 0xF8000000 #define HI6220_PERI_BASE 0xF7030000 diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index 1c8d24e576..7e681e94d7 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -21,8 +21,12 @@ #define MXC_CPU_MX6D 0x67 #define MXC_CPU_MX6DP 0x68 #define MXC_CPU_MX6QP 0x69 +#define MXC_CPU_MX7D 0x72 #define MXC_CPU_VF610 0xF6 /* dummy ID */ +#define MXC_SOC_MX6 0x60 +#define MXC_SOC_MX7 0x70 + #define CS0_128 0 #define CS0_64M_CS1_64M 1 #define CS0_64M_CS1_32M_CS2_32M 2 diff --git a/arch/arm/include/asm/arch-lpc32xx/clk.h b/arch/arm/include/asm/arch-lpc32xx/clk.h index d21310e194..303ff1cdb7 100644 --- a/arch/arm/include/asm/arch-lpc32xx/clk.h +++ b/arch/arm/include/asm/arch-lpc32xx/clk.h @@ -158,9 +158,6 @@ struct clk_pm_regs { #define CLK_NAND_SLC_SELECT (1 << 2) #define CLK_NAND_MLC_INT (1 << 5) -/* DMA Clock Control Register bits */ -#define DMA_CLK_ENABLE (1 << 0) - /* SSP Clock Control Register bits */ #define CLK_SSP0_ENABLE_CLOCK (1 << 0) diff --git a/arch/arm/include/asm/arch-lpc32xx/emc.h b/arch/arm/include/asm/arch-lpc32xx/emc.h index 1a2bab251f..f70faf8038 100644 --- a/arch/arm/include/asm/arch-lpc32xx/emc.h +++ b/arch/arm/include/asm/arch-lpc32xx/emc.h @@ -70,7 +70,7 @@ struct emc_regs { /* Static Memory Delay Registers */ #define EMC_STAT_WAITWEN(n) (((n) - 1) & 0x0F) -#define EMC_STAT_WAITOEN(n) (((n) - 1) & 0x0F) +#define EMC_STAT_WAITOEN(n) ((n) & 0x0F) #define EMC_STAT_WAITRD(n) (((n) - 1) & 0x1F) #define EMC_STAT_WAITPAGE(n) (((n) - 1) & 0x1F) #define EMC_STAT_WAITWR(n) (((n) - 2) & 0x1F) diff --git a/arch/arm/include/asm/arch-lpc32xx/gpio_grp.h b/arch/arm/include/asm/arch-lpc32xx/gpio_grp.h index c9cf9df7cb..64acf150a3 100644 --- a/arch/arm/include/asm/arch-lpc32xx/gpio_grp.h +++ b/arch/arm/include/asm/arch-lpc32xx/gpio_grp.h @@ -12,7 +12,7 @@ /* * Macro to map the pin for the lpc32xx_gpio driver. - * Note: - GPIOS are considered here as homogeneous and linear, from 0 to 127; + * Note: - GPIOS are considered here as homogeneous and linear from 0 to 159; * mapping is done per register, as group of 32. * (see drivers/gpio/lpc32xx_gpio.c for details). * - macros can be use with the following pins: @@ -26,9 +26,9 @@ #define LPC32XX_GPIO_P0_GRP 0 #define LPC32XX_GPIO_P1_GRP 32 #define LPC32XX_GPIO_P2_GRP 64 -#define LPC32XX_GPI_P3_GRP 96 #define LPC32XX_GPO_P3_GRP 96 #define LPC32XX_GPIO_P3_GRP (LPC32XX_GPO_P3_GRP + 25) +#define LPC32XX_GPI_P3_GRP 128 /* * A specific GPIO can be selected with this macro diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index a685ed2c3b..74512ac08e 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -137,8 +137,10 @@ /* Defines for Blocks connected via AIPS (SkyBlue) */ #define ATZ1_BASE_ADDR AIPS1_ARB_BASE_ADDR #define ATZ2_BASE_ADDR AIPS2_ARB_BASE_ADDR +#define ATZ3_BASE_ADDR AIPS3_ARB_BASE_ADDR #define AIPS1_BASE_ADDR AIPS1_ON_BASE_ADDR #define AIPS2_BASE_ADDR AIPS2_ON_BASE_ADDR +#define AIPS3_BASE_ADDR AIPS3_ON_BASE_ADDR #define SPDIF_BASE_ADDR (ATZ1_BASE_ADDR + 0x04000) #define ECSPI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x08000) @@ -219,6 +221,8 @@ #define AIPS2_ON_BASE_ADDR (ATZ2_BASE_ADDR + 0x7C000) #define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000) +#define AIPS3_ON_BASE_ADDR (ATZ3_BASE_ADDR + 0x7C000) +#define AIPS3_OFF_BASE_ADDR (ATZ3_BASE_ADDR + 0x80000) #define CAAM_BASE_ADDR (ATZ2_BASE_ADDR) #define ARM_BASE_ADDR (ATZ2_BASE_ADDR + 0x40000) diff --git a/arch/arm/include/asm/arch-mx7/clock.h b/arch/arm/include/asm/arch-mx7/clock.h new file mode 100644 index 0000000000..688d2361df --- /dev/null +++ b/arch/arm/include/asm/arch-mx7/clock.h @@ -0,0 +1,348 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * Author: + * Peng Fan <Peng.Fan@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_CLOCK_H +#define _ASM_ARCH_CLOCK_H + +#include <common.h> +#include <asm/arch/crm_regs.h> + +#ifdef CONFIG_SYS_MX7_HCLK +#define MXC_HCLK CONFIG_SYS_MX7_HCLK +#else +#define MXC_HCLK 24000000 +#endif + +#ifdef CONFIG_SYS_MX7_CLK32 +#define MXC_CLK32 CONFIG_SYS_MX7_CLK32 +#else +#define MXC_CLK32 32768 +#endif + +/* Mainly for compatible to imx common code. */ +enum mxc_clock { + MXC_ARM_CLK = 0, + MXC_AHB_CLK, + MXC_IPG_CLK, + MXC_UART_CLK, + MXC_CSPI_CLK, + MXC_AXI_CLK, + MXC_DDR_CLK, + MXC_ESDHC_CLK, + MXC_ESDHC2_CLK, + MXC_ESDHC3_CLK, + MXC_I2C_CLK, +}; + +/* PLL supported by i.mx7d */ +enum pll_clocks { + PLL_CORE, /* Core PLL */ + PLL_SYS, /* System PLL*/ + PLL_ENET, /* Enet PLL */ + PLL_AUDIO, /* Audio PLL */ + PLL_VIDEO, /* Video PLL*/ + PLL_DDR, /* Dram PLL */ + PLL_USB, /* USB PLL, fixed at 480MHZ */ +}; + +/* clk src for clock root gen */ +enum clk_root_src { + OSC_24M_CLK, + + PLL_ARM_MAIN_800M_CLK, + + PLL_SYS_MAIN_480M_CLK, + PLL_SYS_MAIN_240M_CLK, + PLL_SYS_MAIN_120M_CLK, + PLL_SYS_PFD0_392M_CLK, + PLL_SYS_PFD0_196M_CLK, + PLL_SYS_PFD1_332M_CLK, + PLL_SYS_PFD1_166M_CLK, + PLL_SYS_PFD2_270M_CLK, + PLL_SYS_PFD2_135M_CLK, + PLL_SYS_PFD3_CLK, + PLL_SYS_PFD4_CLK, + PLL_SYS_PFD5_CLK, + PLL_SYS_PFD6_CLK, + PLL_SYS_PFD7_CLK, + + PLL_ENET_MAIN_500M_CLK, + PLL_ENET_MAIN_250M_CLK, + PLL_ENET_MAIN_125M_CLK, + PLL_ENET_MAIN_100M_CLK, + PLL_ENET_MAIN_50M_CLK, + PLL_ENET_MAIN_40M_CLK, + PLL_ENET_MAIN_25M_CLK, + + PLL_DRAM_MAIN_1066M_CLK, + PLL_DRAM_MAIN_533M_CLK, + + PLL_AUDIO_MAIN_CLK, + PLL_VIDEO_MAIN_CLK, + + PLL_USB_MAIN_480M_CLK, /* fixed at 480MHZ */ + + EXT_CLK_1, + EXT_CLK_2, + EXT_CLK_3, + EXT_CLK_4, + + REF_1M_CLK, + OSC_32K_CLK, +}; + +/* + * Clock root index + */ +enum clk_root_index { + ARM_A7_CLK_ROOT = 0, + ARM_M4_CLK_ROOT = 1, + ARM_M0_CLK_ROOT = 2, + MAIN_AXI_CLK_ROOT = 16, + DISP_AXI_CLK_ROOT = 17, + ENET_AXI_CLK_ROOT = 18, + NAND_USDHC_BUS_CLK_ROOT = 19, + AHB_CLK_ROOT = 32, + DRAM_PHYM_CLK_ROOT = 48, + DRAM_CLK_ROOT = 49, + DRAM_PHYM_ALT_CLK_ROOT = 64, + DRAM_ALT_CLK_ROOT = 65, + USB_HSIC_CLK_ROOT = 66, + PCIE_CTRL_CLK_ROOT = 67, + PCIE_PHY_CLK_ROOT = 68, + EPDC_PIXEL_CLK_ROOT = 69, + LCDIF_PIXEL_CLK_ROOT = 70, + MIPI_DSI_EXTSER_CLK_ROOT = 71, + MIPI_CSI_WARP_CLK_ROOT = 72, + MIPI_DPHY_REF_CLK_ROOT = 73, + SAI1_CLK_ROOT = 74, + SAI2_CLK_ROOT = 75, + SAI3_CLK_ROOT = 76, + SPDIF_CLK_ROOT = 77, + ENET1_REF_CLK_ROOT = 78, + ENET1_TIME_CLK_ROOT = 79, + ENET2_REF_CLK_ROOT = 80, + ENET2_TIME_CLK_ROOT = 81, + ENET_PHY_REF_CLK_ROOT = 82, + EIM_CLK_ROOT = 83, + NAND_CLK_ROOT = 84, + QSPI_CLK_ROOT = 85, + USDHC1_CLK_ROOT = 86, + USDHC2_CLK_ROOT = 87, + USDHC3_CLK_ROOT = 88, + CAN1_CLK_ROOT = 89, + CAN2_CLK_ROOT = 90, + I2C1_CLK_ROOT = 91, + I2C2_CLK_ROOT = 92, + I2C3_CLK_ROOT = 93, + I2C4_CLK_ROOT = 94, + UART1_CLK_ROOT = 95, + UART2_CLK_ROOT = 96, + UART3_CLK_ROOT = 97, + UART4_CLK_ROOT = 98, + UART5_CLK_ROOT = 99, + UART6_CLK_ROOT = 100, + UART7_CLK_ROOT = 101, + ECSPI1_CLK_ROOT = 102, + ECSPI2_CLK_ROOT = 103, + ECSPI3_CLK_ROOT = 104, + ECSPI4_CLK_ROOT = 105, + PWM1_CLK_ROOT = 106, + PWM2_CLK_ROOT = 107, + PWM3_CLK_ROOT = 108, + PWM4_CLK_ROOT = 109, + FLEXTIMER1_CLK_ROOT = 110, + FLEXTIMER2_CLK_ROOT = 111, + SIM1_CLK_ROOT = 112, + SIM2_CLK_ROOT = 113, + GPT1_CLK_ROOT = 114, + GPT2_CLK_ROOT = 115, + GPT3_CLK_ROOT = 116, + GPT4_CLK_ROOT = 117, + TRACE_CLK_ROOT = 118, + WDOG_CLK_ROOT = 119, + CSI_MCLK_CLK_ROOT = 120, + AUDIO_MCLK_CLK_ROOT = 121, + WRCLK_CLK_ROOT = 122, + IPP_DO_CLKO1 = 123, + IPP_DO_CLKO2 = 124, + + CLK_ROOT_MAX, +}; + +struct clk_root_setting { + enum clk_root_index root; + u32 setting; +}; + +/* + * CCGR mapping + */ +enum clk_ccgr_index { + CCGR_CPU = 0, + CCGR_M4 = 1, + CCGR_SIM_MAIN = 4, + CCGR_SIM_DISPLAY = 5, + CCGR_SIM_ENET = 6, + CCGR_SIM_M = 7, + CCGR_SIM_S = 8, + CCGR_SIM_WAKEUP = 9, + CCGR_IPMUX1 = 10, + CCGR_IPMUX2 = 11, + CCGR_IPMUX3 = 12, + CCGR_ROM = 16, + CCGR_OCRAM = 17, + CCGR_OCRAM_S = 18, + CCGR_DRAM = 19, + CCGR_RAWNAND = 20, + CCGR_QSPI = 21, + CCGR_WEIM = 22, + CCGR_ADC = 32, + CCGR_ANATOP = 33, + CCGR_SCTR = 34, + CCGR_OCOTP = 35, + CCGR_CAAM = 36, + CCGR_SNVS = 37, + CCGR_RDC = 38, + CCGR_MU = 39, + CCGR_HS = 40, + CCGR_DVFS = 41, + CCGR_QOS = 42, + CCGR_QOS_DISPMIX = 43, + CCGR_QOS_MEGAMIX = 44, + CCGR_CSU = 45, + CCGR_DBGMON = 46, + CCGR_DEBUG = 47, + CCGR_TRACE = 48, + CCGR_SEC_DEBUG = 49, + CCGR_SEMA1 = 64, + CCGR_SEMA2 = 65, + CCGR_PERFMON1 = 68, + CCGR_PERFMON2 = 69, + CCGR_SDMA = 72, + CCGR_CSI = 73, + CCGR_EPDC = 74, + CCGR_LCDIF = 75, + CCGR_PXP = 76, + CCGR_PCIE = 96, + CCGR_MIPI_CSI = 100, + CCGR_MIPI_DSI = 101, + CCGR_MIPI_MEM_PHY = 102, + CCGR_USB_CTRL = 104, + CCGR_USB_HSIC = 105, + CCGR_USB_PHY1 = 106, + CCGR_USB_PHY2 = 107, + CCGR_USDHC1 = 108, + CCGR_USDHC2 = 109, + CCGR_USDHC3 = 110, + CCGR_ENET1 = 112, + CCGR_ENET2 = 113, + CCGR_CAN1 = 116, + CCGR_CAN2 = 117, + CCGR_ECSPI1 = 120, + CCGR_ECSPI2 = 121, + CCGR_ECSPI3 = 122, + CCGR_ECSPI4 = 123, + CCGR_GPT1 = 124, + CCGR_GPT2 = 125, + CCGR_GPT3 = 126, + CCGR_GPT4 = 127, + CCGR_FTM1 = 128, + CCGR_FTM2 = 129, + CCGR_PWM1 = 132, + CCGR_PWM2 = 133, + CCGR_PWM3 = 134, + CCGR_PWM4 = 135, + CCGR_I2C1 = 136, + CCGR_I2C2 = 137, + CCGR_I2C3 = 138, + CCGR_I2C4 = 139, + CCGR_SAI1 = 140, + CCGR_SAI2 = 141, + CCGR_SAI3 = 142, + CCGR_SIM1 = 144, + CCGR_SIM2 = 145, + CCGR_UART1 = 148, + CCGR_UART2 = 149, + CCGR_UART3 = 150, + CCGR_UART4 = 151, + CCGR_UART5 = 152, + CCGR_UART6 = 153, + CCGR_UART7 = 154, + CCGR_WDOG1 = 156, + CCGR_WDOG2 = 157, + CCGR_WDOG3 = 158, + CCGR_WDOG4 = 159, + CCGR_GPIO1 = 160, + CCGR_GPIO2 = 161, + CCGR_GPIO3 = 162, + CCGR_GPIO4 = 163, + CCGR_GPIO5 = 164, + CCGR_GPIO6 = 165, + CCGR_GPIO7 = 166, + CCGR_IOMUX = 168, + CCGR_IOMUX_LPSR = 169, + CCGR_KPP = 170, + + CCGR_SKIP, + CCGR_MAX, +}; + +/* Clock root channel */ +enum clk_root_type { + CCM_CORE_CHANNEL, + CCM_BUS_CHANNEL, + CCM_AHB_CHANNEL, + CCM_DRAM_PHYM_CHANNEL, + CCM_DRAM_CHANNEL, + CCM_IP_CHANNEL, +}; + +#include <asm/arch/clock_slice.h> + +/* + * entry: the clock root index + * type: ccm channel + * src_mux: each entry corresponding to the clock src, detailed info in CCM RM + */ +struct clk_root_map { + enum clk_root_index entry; + enum clk_root_type type; + uint8_t src_mux[8]; +}; + +enum enet_freq { + ENET_25MHz, + ENET_50MHz, + ENET_125MHz, +}; + +u32 get_root_clk(enum clk_root_index clock_id); +u32 mxc_get_clock(enum mxc_clock clk); +u32 imx_get_uartclk(void); +u32 imx_get_fecclk(void); +void clock_init(void); +#ifdef CONFIG_SYS_I2C_MXC +int enable_i2c_clk(unsigned char enable, unsigned i2c_num); +#endif +#ifdef CONFIG_FEC_MXC +int set_clk_enet(enum enet_freq type); +#endif +int set_clk_qspi(void); +int set_clk_nand(void); +#ifdef CONFIG_MXC_OCOTP +void enable_ocotp_clk(unsigned char enable); +#endif +void enable_usboh3_clk(unsigned char enable); +#ifdef CONFIG_SECURE_BOOT +void hab_caam_clock_enable(unsigned char enable); +#endif +void mxs_set_lcdclk(uint32_t base_addr, uint32_t freq); +void enable_thermal_clk(void); +#endif diff --git a/arch/arm/include/asm/arch-mx7/clock_slice.h b/arch/arm/include/asm/arch-mx7/clock_slice.h new file mode 100644 index 0000000000..6ede0cd1c9 --- /dev/null +++ b/arch/arm/include/asm/arch-mx7/clock_slice.h @@ -0,0 +1,116 @@ +/* + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. + * + * Author: + * Peng Fan <Peng.Fan@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_CLOCK_SLICE_H +#define _ASM_ARCH_CLOCK_SLICE_H + +enum root_pre_div { + CLK_ROOT_PRE_DIV1 = 0, + CLK_ROOT_PRE_DIV2, + CLK_ROOT_PRE_DIV3, + CLK_ROOT_PRE_DIV4, + CLK_ROOT_PRE_DIV5, + CLK_ROOT_PRE_DIV6, + CLK_ROOT_PRE_DIV7, + CLK_ROOT_PRE_DIV8, +}; + +enum root_post_div { + CLK_ROOT_POST_DIV1 = 0, + CLK_ROOT_POST_DIV2, + CLK_ROOT_POST_DIV3, + CLK_ROOT_POST_DIV4, + CLK_ROOT_POST_DIV5, + CLK_ROOT_POST_DIV6, + CLK_ROOT_POST_DIV7, + CLK_ROOT_POST_DIV8, + CLK_ROOT_POST_DIV9, + CLK_ROOT_POST_DIV10, + CLK_ROOT_POST_DIV11, + CLK_ROOT_POST_DIV12, + CLK_ROOT_POST_DIV13, + CLK_ROOT_POST_DIV14, + CLK_ROOT_POST_DIV15, + CLK_ROOT_POST_DIV16, + CLK_ROOT_POST_DIV17, + CLK_ROOT_POST_DIV18, + CLK_ROOT_POST_DIV19, + CLK_ROOT_POST_DIV20, + CLK_ROOT_POST_DIV21, + CLK_ROOT_POST_DIV22, + CLK_ROOT_POST_DIV23, + CLK_ROOT_POST_DIV24, + CLK_ROOT_POST_DIV25, + CLK_ROOT_POST_DIV26, + CLK_ROOT_POST_DIV27, + CLK_ROOT_POST_DIV28, + CLK_ROOT_POST_DIV29, + CLK_ROOT_POST_DIV30, + CLK_ROOT_POST_DIV31, + CLK_ROOT_POST_DIV32, + CLK_ROOT_POST_DIV33, + CLK_ROOT_POST_DIV34, + CLK_ROOT_POST_DIV35, + CLK_ROOT_POST_DIV36, + CLK_ROOT_POST_DIV37, + CLK_ROOT_POST_DIV38, + CLK_ROOT_POST_DIV39, + CLK_ROOT_POST_DIV40, + CLK_ROOT_POST_DIV41, + CLK_ROOT_POST_DIV42, + CLK_ROOT_POST_DIV43, + CLK_ROOT_POST_DIV44, + CLK_ROOT_POST_DIV45, + CLK_ROOT_POST_DIV46, + CLK_ROOT_POST_DIV47, + CLK_ROOT_POST_DIV48, + CLK_ROOT_POST_DIV49, + CLK_ROOT_POST_DIV50, + CLK_ROOT_POST_DIV51, + CLK_ROOT_POST_DIV52, + CLK_ROOT_POST_DIV53, + CLK_ROOT_POST_DIV54, + CLK_ROOT_POST_DIV55, + CLK_ROOT_POST_DIV56, + CLK_ROOT_POST_DIV57, + CLK_ROOT_POST_DIV58, + CLK_ROOT_POST_DIV59, + CLK_ROOT_POST_DIV60, + CLK_ROOT_POST_DIV61, + CLK_ROOT_POST_DIV62, + CLK_ROOT_POST_DIV63, + CLK_ROOT_POST_DIV64, +}; + +enum root_auto_div { + CLK_ROOT_AUTO_DIV1 = 0, + CLK_ROOT_AUTO_DIV2, + CLK_ROOT_AUTO_DIV4, + CLK_ROOT_AUTO_DIV8, + CLK_ROOT_AUTO_DIV16, +}; + +int clock_set_src(enum clk_root_index clock_id, enum clk_root_src clock_src); +int clock_get_src(enum clk_root_index clock_id, enum clk_root_src *p_clock_src); +int clock_set_prediv(enum clk_root_index clock_id, enum root_pre_div pre_div); +int clock_get_prediv(enum clk_root_index clock_id, enum root_pre_div *pre_div); +int clock_set_postdiv(enum clk_root_index clock_id, enum root_post_div div); +int clock_get_postdiv(enum clk_root_index clock_id, enum root_post_div *div); +int clock_set_autopostdiv(enum clk_root_index clock_id, enum root_auto_div div, + int auto_en); +int clock_get_autopostdiv(enum clk_root_index clock_id, enum root_auto_div *div, + int *auto_en); +int clock_get_target_val(enum clk_root_index clock_id, u32 *val); +int clock_set_target_val(enum clk_root_index clock_id, u32 val); +int clock_root_cfg(enum clk_root_index clock_id, enum root_pre_div pre_div, + enum root_post_div post_div, enum clk_root_src clock_src); +int clock_root_enabled(enum clk_root_index clock_id); + +int clock_enable(enum clk_ccgr_index index, bool enable); +#endif diff --git a/arch/arm/include/asm/arch-mx7/crm_regs.h b/arch/arm/include/asm/arch-mx7/crm_regs.h new file mode 100644 index 0000000000..d65d4d9daf --- /dev/null +++ b/arch/arm/include/asm/arch-mx7/crm_regs.h @@ -0,0 +1,2813 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * Author: + * Peng Fan <Peng.Fan@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ARCH_ARM_MACH_MX7_CCM_REGS_H__ +#define __ARCH_ARM_MACH_MX7_CCM_REGS_H__ + +#include <asm/arch/imx-regs.h> +#include <asm/io.h> + +#define CCM_GPR0_OFFSET 0x0 +#define CCM_OBSERVE0_OFFSET 0x0400 +#define CCM_SCTRL0_OFFSET 0x0800 +#define CCM_CCGR0_OFFSET 0x4000 +#define CCM_ROOT0_TARGET_OFFSET 0x8000 + +#ifndef __ASSEMBLY__ + +struct mxc_ccm_ccgr { + uint32_t ccgr; + uint32_t ccgr_set; + uint32_t ccgr_clr; + uint32_t ccgr_tog; +}; + +struct mxc_ccm_root_slice { + uint32_t target_root; + uint32_t target_root_set; + uint32_t target_root_clr; + uint32_t target_root_tog; + uint32_t reserved_0[4]; + uint32_t post; + uint32_t post_root_set; + uint32_t post_root_clr; + uint32_t post_root_tog; + uint32_t pre; + uint32_t pre_root_set; + uint32_t pre_root_clr; + uint32_t pre_root_tog; + uint32_t reserved_1[12]; + uint32_t access_ctrl; + uint32_t access_ctrl_root_set; + uint32_t access_ctrl_root_clr; + uint32_t access_ctrl_root_tog; +}; + +/** CCM - Peripheral register structure */ +struct mxc_ccm_reg { + uint32_t gpr0; + uint32_t gpr0_set; + uint32_t gpr0_clr; + uint32_t gpr0_tog; + uint32_t reserved_0[4092]; + struct mxc_ccm_ccgr ccgr_array[191]; /* offset 0x4000 */ + uint32_t reserved_1[3332]; + struct mxc_ccm_root_slice root[121]; /* offset 0x8000 */ + +}; + +struct mxc_ccm_anatop_reg { + uint32_t ctrl_24m; /* offset 0x0000 */ + uint32_t ctrl_24m_set; + uint32_t ctrl_24m_clr; + uint32_t ctrl_24m_tog; + uint32_t rcosc_config0; /* offset 0x0010 */ + uint32_t rcosc_config0_set; + uint32_t rcosc_config0_clr; + uint32_t rcosc_config0_tog; + uint32_t rcosc_config1; /* offset 0x0020 */ + uint32_t rcosc_config1_set; + uint32_t rcosc_config1_clr; + uint32_t rcosc_config1_tog; + uint32_t rcosc_config2; /* offset 0x0030 */ + uint32_t rcosc_config2_set; + uint32_t rcosc_config2_clr; + uint32_t rcosc_config2_tog; + uint8_t reserved_0[16]; + uint32_t osc_32k; /* offset 0x0050 */ + uint32_t osc_32k_set; + uint32_t osc_32k_clr; + uint32_t osc_32k_tog; + uint32_t pll_arm; /* offset 0x0060 */ + uint32_t pll_arm_set; + uint32_t pll_arm_clr; + uint32_t pll_arm_tog; + uint32_t pll_ddr; /* offset 0x0070 */ + uint32_t pll_ddr_set; + uint32_t pll_ddr_clr; + uint32_t pll_ddr_tog; + uint32_t pll_ddr_ss; /* offset 0x0080 */ + uint8_t reserved_1[12]; + uint32_t pll_ddr_num; /* offset 0x0090 */ + uint8_t reserved_2[12]; + uint32_t pll_ddr_denom; /* offset 0x00a0 */ + uint8_t reserved_3[12]; + uint32_t pll_480; /* offset 0x00b0 */ + uint32_t pll_480_set; + uint32_t pll_480_clr; + uint32_t pll_480_tog; + uint32_t pfd_480a; /* offset 0x00c0 */ + uint32_t pfd_480a_set; + uint32_t pfd_480a_clr; + uint32_t pfd_480a_tog; + uint32_t pfd_480b; /* offset 0x00d0 */ + uint32_t pfd_480b_set; + uint32_t pfd_480b_clr; + uint32_t pfd_480b_tog; + uint32_t pll_enet; /* offset 0x00e0 */ + uint32_t pll_enet_set; + uint32_t pll_enet_clr; + uint32_t pll_enet_tog; + uint32_t pll_audio; /* offset 0x00f0 */ + uint32_t pll_audio_set; + uint32_t pll_audio_clr; + uint32_t pll_audio_tog; + uint32_t pll_audio_ss; /* offset 0x0100 */ + uint8_t reserved_4[12]; + uint32_t pll_audio_num; /* offset 0x0110 */ + uint8_t reserved_5[12]; + uint32_t pll_audio_denom; /* offset 0x0120 */ + uint8_t reserved_6[12]; + uint32_t pll_video; /* offset 0x0130 */ + uint32_t pll_video_set; + uint32_t pll_video_clr; + uint32_t pll_video_tog; + uint32_t pll_video_ss; /* offset 0x0140 */ + uint8_t reserved_7[12]; + uint32_t pll_video_num; /* offset 0x0150 */ + uint8_t reserved_8[12]; + uint32_t pll_video_denom; /* offset 0x0160 */ + uint8_t reserved_9[12]; + uint32_t clk_misc0; /* offset 0x0170 */ + uint32_t clk_misc0_set; + uint32_t clk_misc0_clr; + uint32_t clk_misc0_tog; + uint32_t clk_rsvd; /* offset 0x0180 */ + uint8_t reserved_10[124]; + uint32_t reg_1p0a; /* offset 0x0200 */ + uint32_t reg_1p0a_set; + uint32_t reg_1p0a_clr; + uint32_t reg_1p0a_tog; + uint32_t reg_1p0d; /* offsest 0x0210 */ + uint32_t reg_1p0d_set; + uint32_t reg_1p0d_clr; + uint32_t reg_1p0d_tog; + uint32_t reg_hsic_1p2; /* offset 0x0220 */ + uint32_t reg_hsic_1p2_set; + uint32_t reg_hsic_1p2_clr; + uint32_t reg_hsic_1p2_tog; + uint32_t reg_lpsr_1p0; /* offset 0x0230 */ + uint32_t reg_lpsr_1p0_set; + uint32_t reg_lpsr_1p0_clr; + uint32_t reg_lpsr_1p0_tog; + uint32_t reg_3p0; /* offset 0x0240 */ + uint32_t reg_3p0_set; + uint32_t reg_3p0_clr; + uint32_t reg_3p0_tog; + uint32_t reg_snvs; /* offset 0x0250 */ + uint32_t reg_snvs_set; + uint32_t reg_snvs_clr; + uint32_t reg_snvs_tog; + uint32_t analog_debug_misc0; /* offset 0x0260 */ + uint32_t analog_debug_misc0_set; + uint32_t analog_debug_misc0_clr; + uint32_t analog_debug_misc0_tog; + uint32_t ref; /* offset 0x0270 */ + uint32_t ref_set; + uint32_t ref_clr; + uint32_t ref_tog; + uint8_t reserved_11[128]; + uint32_t tempsense0; /* offset 0x0300 */ + uint32_t tempsense0_set; + uint32_t tempsense0_clr; + uint32_t tempsense0_tog; + uint32_t tempsense1; /* offset 0x0310 */ + uint32_t tempsense1_set; + uint32_t tempsense1_clr; + uint32_t tempsense1_tog; + uint32_t tempsense_trim; /* offset 0x0320 */ + uint32_t tempsense_trim_set; + uint32_t tempsense_trim_clr; + uint32_t tempsense_trim_tog; + uint32_t lowpwr_ctrl; /* offset 0x0330 */ + uint32_t lowpwr_ctrl_set; + uint32_t lowpwr_ctrl_clr; + uint32_t lowpwr_ctrl_tog; + uint32_t snvs_tamper_offset_ctrl; /* offset 0x0340 */ + uint32_t snvs_tamper_offset_ctrl_set; + uint32_t snvs_tamper_offset_ctrl_clr; + uint32_t snvs_tamper_offset_ctrl_tog; + uint32_t snvs_tamper_pull_ctrl; /* offset 0x0350 */ + uint32_t snvs_tamper_pull_ctrl_set; + uint32_t snvs_tamper_pull_ctrl_clr; + uint32_t snvs_tamper_pull_ctrl_tog; + uint32_t snvs_test; /* offset 0x0360 */ + uint32_t snvs_test_set; + uint32_t snvs_test_clr; + uint32_t snvs_test_tog; + uint32_t snvs_tamper_trim_ctrl; /* offset 0x0370 */ + uint32_t snvs_tamper_trim_ctrl_set; + uint32_t snvs_tamper_trim_ctrl_ctrl; + uint32_t snvs_tamper_trim_ctrl_tog; + uint32_t snvs_misc_ctrl; /* offset 0x0380 */ + uint32_t snvs_misc_ctrl_set; + uint32_t snvs_misc_ctrl_clr; + uint32_t snvs_misc_ctrl_tog; + uint8_t reserved_12[112]; + uint32_t misc; /* offset 0x0400 */ + uint8_t reserved_13[252]; + uint32_t adc0; /* offset 0x0500 */ + uint8_t reserved_14[12]; + uint32_t adc1; /* offset 0x0510 */ + uint8_t reserved_15[748]; + uint32_t digprog; /* offset 0x0800 */ +}; +#endif + +#define ANADIG_CLK_MISC0_PFD_480_AUTOGATE_EN_MASK (0x01 << 17) + +#define ANADIG_PLL_LOCK 0x80000000 + +#define ANADIG_PLL_ARM_PWDN_MASK (0x01 << 12) +#define ANADIG_PLL_480_PWDN_MASK (0x01 << 12) +#define ANADIG_PLL_DDR_PWDN_MASK (0x01 << 20) +#define ANADIG_PLL_ENET_PWDN_MASK (0x01 << 5) +#define ANADIG_PLL_VIDEO_PWDN_MASK (0x01 << 12) + + +#define ANATOP_PFD480B_PFD4_FRAC_MASK 0x0000003f +#define ANATOP_PFD480B_PFD4_FRAC_320M_VAL 0x0000001B +#define ANATOP_PFD480B_PFD4_FRAC_392M_VAL 0x00000016 +#define ANATOP_PFD480B_PFD4_FRAC_432M_VAL 0x00000014 + +/* PLL_ARM Bit Fields */ +#define CCM_ANALOG_PLL_ARM_DIV_SELECT_MASK 0x7F +#define CCM_ANALOG_PLL_ARM_DIV_SELECT_SHIFT 0 +#define CCM_ANALOG_PLL_ARM_HALF_LF_MASK 0x80 +#define CCM_ANALOG_PLL_ARM_HALF_LF_SHIFT 7 +#define CCM_ANALOG_PLL_ARM_DOUBLE_LF_MASK 0x100 +#define CCM_ANALOG_PLL_ARM_DOUBLE_LF_SHIFT 8 +#define CCM_ANALOG_PLL_ARM_HALF_CP_MASK 0x200 +#define CCM_ANALOG_PLL_ARM_HALF_CP_SHIFT 9 +#define CCM_ANALOG_PLL_ARM_DOUBLE_CP_MASK 0x400 +#define CCM_ANALOG_PLL_ARM_DOUBLE_CP_SHIFT 10 +#define CCM_ANALOG_PLL_ARM_HOLD_RING_OFF_MASK 0x800 +#define CCM_ANALOG_PLL_ARM_HOLD_RING_OFF_SHIFT 11 +#define CCM_ANALOG_PLL_ARM_POWERDOWN_MASK 0x1000 +#define CCM_ANALOG_PLL_ARM_POWERDOWN_SHIFT 12 +#define CCM_ANALOG_PLL_ARM_ENABLE_CLK_MASK 0x2000 +#define CCM_ANALOG_PLL_ARM_ENABLE_CLK_SHIFT 13 +#define CCM_ANALOG_PLL_ARM_BYPASS_CLK_SRC_MASK 0xC000 +#define CCM_ANALOG_PLL_ARM_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_ARM_BYPASS_MASK 0x10000 +#define CCM_ANALOG_PLL_ARM_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_ARM_LVDS_SEL_MASK 0x20000 +#define CCM_ANALOG_PLL_ARM_LVDS_SEL_SHIFT 17 +#define CCM_ANALOG_PLL_ARM_LVDS_24MHZ_SEL_MASK 0x40000 +#define CCM_ANALOG_PLL_ARM_LVDS_24MHZ_SEL_SHIFT 18 +#define CCM_ANALOG_PLL_ARM_PLL_SEL_MASK 0x80000 +#define CCM_ANALOG_PLL_ARM_PLL_SEL_SHIFT 19 +#define CCM_ANALOG_PLL_ARM_PLL_ARM_OVERRIDE_MASK 0x100000 +#define CCM_ANALOG_PLL_ARM_PLL_ARM_OVERRIDE_SHIFT 20 +#define CCM_ANALOG_PLL_ARM_RSVD0_MASK 0x7FE00000 +#define CCM_ANALOG_PLL_ARM_RSVD0_SHIFT 21 +#define CCM_ANALOG_PLL_ARM_LOCK_MASK 0x80000000 +#define CCM_ANALOG_PLL_ARM_LOCK_SHIFT 31 + +/* PLL_DDR Bit Fields */ +#define CCM_ANALOG_PLL_DDR_DIV_SELECT_MASK 0x7F +#define CCM_ANALOG_PLL_DDR_DIV_SELECT_SHIFT 0 +#define CCM_ANALOG_PLL_DDR_HALF_LF_MASK 0x80 +#define CCM_ANALOG_PLL_DDR_HALF_LF_SHIFT 7 +#define CCM_ANALOG_PLL_DDR_DOUBLE_LF_MASK 0x100 +#define CCM_ANALOG_PLL_DDR_DOUBLE_LF_SHIFT 8 +#define CCM_ANALOG_PLL_DDR_HALF_CP_MASK 0x200 +#define CCM_ANALOG_PLL_DDR_HALF_CP_SHIFT 9 +#define CCM_ANALOG_PLL_DDR_DOUBLE_CP_MASK 0x400 +#define CCM_ANALOG_PLL_DDR_DOUBLE_CP_SHIFT 10 +#define CCM_ANALOG_PLL_DDR_HOLD_RING_OFF_MASK 0x800 +#define CCM_ANALOG_PLL_DDR_HOLD_RING_OFF_SHIFT 11 +#define CCM_ANALOG_PLL_DDR_DIV2_ENABLE_CLK_MASK 0x1000 +#define CCM_ANALOG_PLL_DDR_DIV2_ENABLE_CLK_SHIFT 12 +#define CCM_ANALOG_PLL_DDR_ENABLE_CLK_MASK 0x2000 +#define CCM_ANALOG_PLL_DDR_ENABLE_CLK_SHIFT 13 +#define CCM_ANALOG_PLL_DDR_BYPASS_CLK_SRC_MASK 0xC000 +#define CCM_ANALOG_PLL_DDR_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_DDR_BYPASS_MASK 0x10000 +#define CCM_ANALOG_PLL_DDR_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_DDR_DITHER_ENABLE_MASK 0x20000 +#define CCM_ANALOG_PLL_DDR_DITHER_ENABLE_SHIFT 17 +#define CCM_ANALOG_PLL_DDR_PFD_OFFSET_EN_MASK 0x40000 +#define CCM_ANALOG_PLL_DDR_PFD_OFFSET_EN_SHIFT 18 +#define CCM_ANALOG_PLL_DDR_PLL_DDR_OVERRIDE_MASK 0x80000 +#define CCM_ANALOG_PLL_DDR_PLL_DDR_OVERRIDE_SHIFT 19 +#define CCM_ANALOG_PLL_DDR_POWERDOWN_MASK 0x100000 +#define CCM_ANALOG_PLL_DDR_POWERDOWN_SHIFT 20 +#define CCM_ANALOG_PLL_DDR_TEST_DIV_SELECT_MASK 0x600000 +#define CCM_ANALOG_PLL_DDR_TEST_DIV_SELECT_SHIFT 21 +#define CCM_ANALOG_PLL_DDR_RSVD1_MASK 0x7F800000 +#define CCM_ANALOG_PLL_DDR_RSVD1_SHIFT 23 +#define CCM_ANALOG_PLL_DDR_LOCK_MASK 0x80000000 +#define CCM_ANALOG_PLL_DDR_LOCK_SHIFT 31 + +/* PLL_480 Bit Fields */ +#define CCM_ANALOG_PLL_480_DIV_SELECT_MASK 0x1 +#define CCM_ANALOG_PLL_480_DIV_SELECT_SHIFT 0 +#define CCM_ANALOG_PLL_480_RSVD0_MASK 0xE +#define CCM_ANALOG_PLL_480_RSVD0_SHIFT 1 +#define CCM_ANALOG_PLL_480_MAIN_DIV1_CLKGATE_MASK 0x10 +#define CCM_ANALOG_PLL_480_MAIN_DIV1_CLKGATE_SHIFT 4 +#define CCM_ANALOG_PLL_480_MAIN_DIV2_CLKGATE_MASK 0x20 +#define CCM_ANALOG_PLL_480_MAIN_DIV2_CLKGATE_SHIFT 5 +#define CCM_ANALOG_PLL_480_MAIN_DIV4_CLKGATE_MASK 0x40 +#define CCM_ANALOG_PLL_480_MAIN_DIV4_CLKGATE_SHIFT 6 +#define CCM_ANALOG_PLL_480_HALF_LF_MASK 0x80 +#define CCM_ANALOG_PLL_480_HALF_LF_SHIFT 7 +#define CCM_ANALOG_PLL_480_DOUBLE_LF_MASK 0x100 +#define CCM_ANALOG_PLL_480_DOUBLE_LF_SHIFT 8 +#define CCM_ANALOG_PLL_480_HALF_CP_MASK 0x200 +#define CCM_ANALOG_PLL_480_HALF_CP_SHIFT 9 +#define CCM_ANALOG_PLL_480_DOUBLE_CP_MASK 0x400 +#define CCM_ANALOG_PLL_480_DOUBLE_CP_SHIFT 10 +#define CCM_ANALOG_PLL_480_HOLD_RING_OFF_MASK 0x800 +#define CCM_ANALOG_PLL_480_HOLD_RING_OFF_SHIFT 11 +#define CCM_ANALOG_PLL_480_POWERDOWN_MASK 0x1000 +#define CCM_ANALOG_PLL_480_POWERDOWN_SHIFT 12 +#define CCM_ANALOG_PLL_480_ENABLE_CLK_MASK 0x2000 +#define CCM_ANALOG_PLL_480_ENABLE_CLK_SHIFT 13 +#define CCM_ANALOG_PLL_480_BYPASS_CLK_SRC_MASK 0xC000 +#define CCM_ANALOG_PLL_480_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_480_BYPASS_MASK 0x10000 +#define CCM_ANALOG_PLL_480_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_480_PLL_480_OVERRIDE_MASK 0x20000 +#define CCM_ANALOG_PLL_480_PLL_480_OVERRIDE_SHIFT 17 +#define CCM_ANALOG_PLL_480_PFD0_OVERRIDE_MASK 0x40000 +#define CCM_ANALOG_PLL_480_PFD0_OVERRIDE_SHIFT 18 +#define CCM_ANALOG_PLL_480_PFD1_OVERRIDE_MASK 0x80000 +#define CCM_ANALOG_PLL_480_PFD1_OVERRIDE_SHIFT 19 +#define CCM_ANALOG_PLL_480_PFD2_OVERRIDE_MASK 0x100000 +#define CCM_ANALOG_PLL_480_PFD2_OVERRIDE_SHIFT 20 +#define CCM_ANALOG_PLL_480_PFD3_OVERRIDE_MASK 0x200000 +#define CCM_ANALOG_PLL_480_PFD3_OVERRIDE_SHIFT 21 +#define CCM_ANALOG_PLL_480_PFD4_OVERRIDE_MASK 0x400000 +#define CCM_ANALOG_PLL_480_PFD4_OVERRIDE_SHIFT 22 +#define CCM_ANALOG_PLL_480_PFD5_OVERRIDE_MASK 0x800000 +#define CCM_ANALOG_PLL_480_PFD5_OVERRIDE_SHIFT 23 +#define CCM_ANALOG_PLL_480_PFD6_OVERRIDE_MASK 0x1000000 +#define CCM_ANALOG_PLL_480_PFD6_OVERRIDE_SHIFT 24 +#define CCM_ANALOG_PLL_480_PFD7_OVERRIDE_MASK 0x2000000 +#define CCM_ANALOG_PLL_480_PFD7_OVERRIDE_SHIFT 25 +#define CCM_ANALOG_PLL_480_PFD0_DIV2_CLKGATE_MASK 0x4000000 +#define CCM_ANALOG_PLL_480_PFD0_DIV2_CLKGATE_SHIFT 26 +#define CCM_ANALOG_PLL_480_PFD1_DIV2_CLKGATE_MASK 0x8000000 +#define CCM_ANALOG_PLL_480_PFD1_DIV2_CLKGATE_SHIFT 27 +#define CCM_ANALOG_PLL_480_PFD2_DIV2_CLKGATE_MASK 0x10000000 +#define CCM_ANALOG_PLL_480_PFD2_DIV2_CLKGATE_SHIFT 28 +#define CCM_ANALOG_PLL_480_RSVD1_MASK 0x60000000 +#define CCM_ANALOG_PLL_480_RSVD1_SHIFT 29 +#define CCM_ANALOG_PLL_480_LOCK_MASK 0x80000000 +#define CCM_ANALOG_PLL_480_LOCK_SHIFT 31 + +/* PFD_480A Bit Fields */ +#define CCM_ANALOG_PFD_480A_PFD0_FRAC_MASK 0x3F +#define CCM_ANALOG_PFD_480A_PFD0_FRAC_SHIFT 0 +#define CCM_ANALOG_PFD_480A_PFD0_STABLE_MASK 0x40 +#define CCM_ANALOG_PFD_480A_PFD0_STABLE_SHIFT 6 +#define CCM_ANALOG_PFD_480A_PFD0_DIV1_CLKGATE_MASK 0x80 +#define CCM_ANALOG_PFD_480A_PFD0_DIV1_CLKGATE_SHIFT 7 +#define CCM_ANALOG_PFD_480A_PFD1_FRAC_MASK 0x3F00 +#define CCM_ANALOG_PFD_480A_PFD1_FRAC_SHIFT 8 +#define CCM_ANALOG_PFD_480A_PFD1_STABLE_MASK 0x4000 +#define CCM_ANALOG_PFD_480A_PFD1_STABLE_SHIFT 14 +#define CCM_ANALOG_PFD_480A_PFD1_DIV1_CLKGATE_MASK 0x8000 +#define CCM_ANALOG_PFD_480A_PFD1_DIV1_CLKGATE_SHIFT 15 +#define CCM_ANALOG_PFD_480A_PFD2_FRAC_MASK 0x3F0000 +#define CCM_ANALOG_PFD_480A_PFD2_FRAC_SHIFT 16 +#define CCM_ANALOG_PFD_480A_PFD2_STABLE_MASK 0x400000 +#define CCM_ANALOG_PFD_480A_PFD2_STABLE_SHIFT 22 +#define CCM_ANALOG_PFD_480A_PFD2_DIV1_CLKGATE_MASK 0x800000 +#define CCM_ANALOG_PFD_480A_PFD2_DIV1_CLKGATE_SHIFT 23 +#define CCM_ANALOG_PFD_480A_PFD3_FRAC_MASK 0x3F000000 +#define CCM_ANALOG_PFD_480A_PFD3_FRAC_SHIFT 24 +#define CCM_ANALOG_PFD_480A_PFD3_STABLE_MASK 0x40000000 +#define CCM_ANALOG_PFD_480A_PFD3_STABLE_SHIFT 30 +#define CCM_ANALOG_PFD_480A_PFD3_DIV1_CLKGATE_MASK 0x80000000 +#define CCM_ANALOG_PFD_480A_PFD3_DIV1_CLKGATE_SHIFT 31 +/* PFD_480B Bit Fields */ +#define CCM_ANALOG_PFD_480B_PFD4_FRAC_MASK 0x3F +#define CCM_ANALOG_PFD_480B_PFD4_FRAC_SHIFT 0 +#define CCM_ANALOG_PFD_480B_PFD4_STABLE_MASK 0x40 +#define CCM_ANALOG_PFD_480B_PFD4_STABLE_SHIFT 6 +#define CCM_ANALOG_PFD_480B_PFD4_DIV1_CLKGATE_MASK 0x80 +#define CCM_ANALOG_PFD_480B_PFD4_DIV1_CLKGATE_SHIFT 7 +#define CCM_ANALOG_PFD_480B_PFD5_FRAC_MASK 0x3F00 +#define CCM_ANALOG_PFD_480B_PFD5_FRAC_SHIFT 8 +#define CCM_ANALOG_PFD_480B_PFD5_STABLE_MASK 0x4000 +#define CCM_ANALOG_PFD_480B_PFD5_STABLE_SHIFT 14 +#define CCM_ANALOG_PFD_480B_PFD5_DIV1_CLKGATE_MASK 0x8000 +#define CCM_ANALOG_PFD_480B_PFD5_DIV1_CLKGATE_SHIFT 15 +#define CCM_ANALOG_PFD_480B_PFD6_FRAC_MASK 0x3F0000 +#define CCM_ANALOG_PFD_480B_PFD6_FRAC_SHIFT 16 +#define CCM_ANALOG_PFD_480B_PFD6_STABLE_MASK 0x400000 +#define CCM_ANALOG_PFD_480B_PFD6_STABLE_SHIFT 22 +#define CCM_ANALOG_PFD_480B_PFD6_DIV1_CLKGATE_MASK 0x800000 +#define CCM_ANALOG_PFD_480B_PFD6_DIV1_CLKGATE_SHIFT 23 +#define CCM_ANALOG_PFD_480B_PFD7_FRAC_MASK 0x3F000000 +#define CCM_ANALOG_PFD_480B_PFD7_FRAC_SHIFT 24 +#define CCM_ANALOG_PFD_480B_PFD7_STABLE_MASK 0x40000000 +#define CCM_ANALOG_PFD_480B_PFD7_STABLE_SHIFT 30 +#define CCM_ANALOG_PFD_480B_PFD7_DIV1_CLKGATE_MASK 0x80000000 +#define CCM_ANALOG_PFD_480B_PFD7_DIV1_CLKGATE_SHIFT 31 + +/* PLL_ENET Bit Fields */ +#define CCM_ANALOG_PLL_ENET_HALF_LF_MASK 0x1 +#define CCM_ANALOG_PLL_ENET_HALF_LF_SHIFT 0 +#define CCM_ANALOG_PLL_ENET_DOUBLE_LF_MASK 0x2 +#define CCM_ANALOG_PLL_ENET_DOUBLE_LF_SHIFT 1 +#define CCM_ANALOG_PLL_ENET_HALF_CP_MASK 0x4 +#define CCM_ANALOG_PLL_ENET_HALF_CP_SHIFT 2 +#define CCM_ANALOG_PLL_ENET_DOUBLE_CP_MASK 0x8 +#define CCM_ANALOG_PLL_ENET_DOUBLE_CP_SHIFT 3 +#define CCM_ANALOG_PLL_ENET_HOLD_RING_OFF_MASK 0x10 +#define CCM_ANALOG_PLL_ENET_HOLD_RING_OFF_SHIFT 4 +#define CCM_ANALOG_PLL_ENET_POWERDOWN_MASK 0x20 +#define CCM_ANALOG_PLL_ENET_POWERDOWN_SHIFT 5 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_25MHZ_MASK 0x40 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_25MHZ_SHIFT 6 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_40MHZ_MASK 0x80 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_40MHZ_SHIFT 7 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_50MHZ_MASK 0x100 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_50MHZ_SHIFT 8 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_100MHZ_MASK 0x200 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_100MHZ_SHIFT 9 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_125MHZ_MASK 0x400 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_125MHZ_SHIFT 10 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_250MHZ_MASK 0x800 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_250MHZ_SHIFT 11 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_500MHZ_MASK 0x1000 +#define CCM_ANALOG_PLL_ENET_ENABLE_CLK_500MHZ_SHIFT 12 +#define CCM_ANALOG_PLL_ENET_PLL_ENET_OVERRIDE_MASK 0x2000 +#define CCM_ANALOG_PLL_ENET_PLL_ENET_OVERRIDE_SHIFT 13 +#define CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC_MASK 0xC000 +#define CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_ENET_BYPASS_MASK 0x10000 +#define CCM_ANALOG_PLL_ENET_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_ENET_DITHER_ENABLE_MASK 0x20000 +#define CCM_ANALOG_PLL_ENET_DITHER_ENABLE_SHIFT 17 +#define CCM_ANALOG_PLL_ENET_PFD_OFFSET_EN_MASK 0x40000 +#define CCM_ANALOG_PLL_ENET_PFD_OFFSET_EN_SHIFT 18 +#define CCM_ANALOG_PLL_ENET_RSVD1_MASK 0x7FF80000 +#define CCM_ANALOG_PLL_ENET_RSVD1_SHIFT 19 +#define CCM_ANALOG_PLL_ENET_LOCK_MASK 0x80000000 +#define CCM_ANALOG_PLL_ENET_LOCK_SHIFT 31 + +/* PLL_AUDIO Bit Fields */ +#define CCM_ANALOG_PLL_AUDIO_DIV_SELECT_MASK 0x7Fu +#define CCM_ANALOG_PLL_AUDIO_DIV_SELECT_SHIFT 0 +#define CCM_ANALOG_PLL_AUDIO_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_AUDIO_HALF_LF_MASK 0x80u +#define CCM_ANALOG_PLL_AUDIO_HALF_LF_SHIFT 7 +#define CCM_ANALOG_PLL_AUDIO_DOUBLE_LF_MASK 0x100u +#define CCM_ANALOG_PLL_AUDIO_DOUBLE_LF_SHIFT 8 +#define CCM_ANALOG_PLL_AUDIO_HALF_CP_MASK 0x200u +#define CCM_ANALOG_PLL_AUDIO_HALF_CP_SHIFT 9 +#define CCM_ANALOG_PLL_AUDIO_DOUBLE_CP_MASK 0x400u +#define CCM_ANALOG_PLL_AUDIO_DOUBLE_CP_SHIFT 10 +#define CCM_ANALOG_PLL_AUDIO_HOLD_RING_OFF_MASK 0x800u +#define CCM_ANALOG_PLL_AUDIO_HOLD_RING_OFF_SHIFT 11 +#define CCM_ANALOG_PLL_AUDIO_POWERDOWN_MASK 0x1000u +#define CCM_ANALOG_PLL_AUDIO_POWERDOWN_SHIFT 12 +#define CCM_ANALOG_PLL_AUDIO_ENABLE_CLK_MASK 0x2000u +#define CCM_ANALOG_PLL_AUDIO_ENABLE_CLK_SHIFT 13 +#define CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC_MASK 0xC000u +#define CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC_MASK) +#define CCM_ANALOG_PLL_AUDIO_BYPASS_MASK 0x10000u +#define CCM_ANALOG_PLL_AUDIO_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_AUDIO_DITHER_ENABLE_MASK 0x20000u +#define CCM_ANALOG_PLL_AUDIO_DITHER_ENABLE_SHIFT 17 +#define CCM_ANALOG_PLL_AUDIO_PFD_OFFSET_EN_MASK 0x40000u +#define CCM_ANALOG_PLL_AUDIO_PFD_OFFSET_EN_SHIFT 18 +#define CCM_ANALOG_PLL_AUDIO_TEST_DIV_SELECT_MASK 0x180000u +#define CCM_ANALOG_PLL_AUDIO_TEST_DIV_SELECT_SHIFT 19 +#define CCM_ANALOG_PLL_AUDIO_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_TEST_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_AUDIO_RSVD0_MASK 0x200000u +#define CCM_ANALOG_PLL_AUDIO_RSVD0_SHIFT 21 +#define CCM_ANALOG_PLL_AUDIO_POST_DIV_SEL_MASK 0xC00000u +#define CCM_ANALOG_PLL_AUDIO_POST_DIV_SEL_SHIFT 22 +#define CCM_ANALOG_PLL_AUDIO_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_AUDIO_POST_DIV_SEL_MASK) +#define CCM_ANALOG_PLL_AUDIO_PLL_AUDIO_OVERRIDE_MASK 0x1000000u +#define CCM_ANALOG_PLL_AUDIO_PLL_AUDIO_OVERRIDE_SHIFT 24 +#define CCM_ANALOG_PLL_AUDIO_RSVD1_MASK 0x7E000000u +#define CCM_ANALOG_PLL_AUDIO_RSVD1_SHIFT 25 +#define CCM_ANALOG_PLL_AUDIO_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_RSVD1_SHIFT))&CCM_ANALOG_PLL_AUDIO_RSVD1_MASK) +#define CCM_ANALOG_PLL_AUDIO_LOCK_MASK 0x80000000u +#define CCM_ANALOG_PLL_AUDIO_LOCK_SHIFT 31 +/* PLL_AUDIO_SET Bit Fields */ +#define CCM_ANALOG_PLL_AUDIO_SET_DIV_SELECT_MASK 0x7Fu +#define CCM_ANALOG_PLL_AUDIO_SET_DIV_SELECT_SHIFT 0 +#define CCM_ANALOG_PLL_AUDIO_SET_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SET_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_SET_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_AUDIO_SET_HALF_LF_MASK 0x80u +#define CCM_ANALOG_PLL_AUDIO_SET_HALF_LF_SHIFT 7 +#define CCM_ANALOG_PLL_AUDIO_SET_DOUBLE_LF_MASK 0x100u +#define CCM_ANALOG_PLL_AUDIO_SET_DOUBLE_LF_SHIFT 8 +#define CCM_ANALOG_PLL_AUDIO_SET_HALF_CP_MASK 0x200u +#define CCM_ANALOG_PLL_AUDIO_SET_HALF_CP_SHIFT 9 +#define CCM_ANALOG_PLL_AUDIO_SET_DOUBLE_CP_MASK 0x400u +#define CCM_ANALOG_PLL_AUDIO_SET_DOUBLE_CP_SHIFT 10 +#define CCM_ANALOG_PLL_AUDIO_SET_HOLD_RING_OFF_MASK 0x800u +#define CCM_ANALOG_PLL_AUDIO_SET_HOLD_RING_OFF_SHIFT 11 +#define CCM_ANALOG_PLL_AUDIO_SET_POWERDOWN_MASK 0x1000u +#define CCM_ANALOG_PLL_AUDIO_SET_POWERDOWN_SHIFT 12 +#define CCM_ANALOG_PLL_AUDIO_SET_ENABLE_CLK_MASK 0x2000u +#define CCM_ANALOG_PLL_AUDIO_SET_ENABLE_CLK_SHIFT 13 +#define CCM_ANALOG_PLL_AUDIO_SET_BYPASS_CLK_SRC_MASK 0xC000u +#define CCM_ANALOG_PLL_AUDIO_SET_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_AUDIO_SET_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SET_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_AUDIO_SET_BYPASS_CLK_SRC_MASK) +#define CCM_ANALOG_PLL_AUDIO_SET_BYPASS_MASK 0x10000u +#define CCM_ANALOG_PLL_AUDIO_SET_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_AUDIO_SET_DITHER_ENABLE_MASK 0x20000u +#define CCM_ANALOG_PLL_AUDIO_SET_DITHER_ENABLE_SHIFT 17 +#define CCM_ANALOG_PLL_AUDIO_SET_PFD_OFFSET_EN_MASK 0x40000u +#define CCM_ANALOG_PLL_AUDIO_SET_PFD_OFFSET_EN_SHIFT 18 +#define CCM_ANALOG_PLL_AUDIO_SET_TEST_DIV_SELECT_MASK 0x180000u +#define CCM_ANALOG_PLL_AUDIO_SET_TEST_DIV_SELECT_SHIFT 19 +#define CCM_ANALOG_PLL_AUDIO_SET_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SET_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_SET_TEST_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_AUDIO_SET_RSVD0_MASK 0x200000u +#define CCM_ANALOG_PLL_AUDIO_SET_RSVD0_SHIFT 21 +#define CCM_ANALOG_PLL_AUDIO_SET_POST_DIV_SEL_MASK 0xC00000u +#define CCM_ANALOG_PLL_AUDIO_SET_POST_DIV_SEL_SHIFT 22 +#define CCM_ANALOG_PLL_AUDIO_SET_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SET_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_AUDIO_SET_POST_DIV_SEL_MASK) +#define CCM_ANALOG_PLL_AUDIO_SET_PLL_AUDIO_OVERRIDE_MASK 0x1000000u +#define CCM_ANALOG_PLL_AUDIO_SET_PLL_AUDIO_OVERRIDE_SHIFT 24 +#define CCM_ANALOG_PLL_AUDIO_SET_RSVD1_MASK 0x7E000000u +#define CCM_ANALOG_PLL_AUDIO_SET_RSVD1_SHIFT 25 +#define CCM_ANALOG_PLL_AUDIO_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SET_RSVD1_SHIFT))&CCM_ANALOG_PLL_AUDIO_SET_RSVD1_MASK) +#define CCM_ANALOG_PLL_AUDIO_SET_LOCK_MASK 0x80000000u +#define CCM_ANALOG_PLL_AUDIO_SET_LOCK_SHIFT 31 +/* PLL_AUDIO_CLR Bit Fields */ +#define CCM_ANALOG_PLL_AUDIO_CLR_DIV_SELECT_MASK 0x7Fu +#define CCM_ANALOG_PLL_AUDIO_CLR_DIV_SELECT_SHIFT 0 +#define CCM_ANALOG_PLL_AUDIO_CLR_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_CLR_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_CLR_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_AUDIO_CLR_HALF_LF_MASK 0x80u +#define CCM_ANALOG_PLL_AUDIO_CLR_HALF_LF_SHIFT 7 +#define CCM_ANALOG_PLL_AUDIO_CLR_DOUBLE_LF_MASK 0x100u +#define CCM_ANALOG_PLL_AUDIO_CLR_DOUBLE_LF_SHIFT 8 +#define CCM_ANALOG_PLL_AUDIO_CLR_HALF_CP_MASK 0x200u +#define CCM_ANALOG_PLL_AUDIO_CLR_HALF_CP_SHIFT 9 +#define CCM_ANALOG_PLL_AUDIO_CLR_DOUBLE_CP_MASK 0x400u +#define CCM_ANALOG_PLL_AUDIO_CLR_DOUBLE_CP_SHIFT 10 +#define CCM_ANALOG_PLL_AUDIO_CLR_HOLD_RING_OFF_MASK 0x800u +#define CCM_ANALOG_PLL_AUDIO_CLR_HOLD_RING_OFF_SHIFT 11 +#define CCM_ANALOG_PLL_AUDIO_CLR_POWERDOWN_MASK 0x1000u +#define CCM_ANALOG_PLL_AUDIO_CLR_POWERDOWN_SHIFT 12 +#define CCM_ANALOG_PLL_AUDIO_CLR_ENABLE_CLK_MASK 0x2000u +#define CCM_ANALOG_PLL_AUDIO_CLR_ENABLE_CLK_SHIFT 13 +#define CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_CLK_SRC_MASK 0xC000u +#define CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_CLK_SRC_MASK) +#define CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_MASK 0x10000u +#define CCM_ANALOG_PLL_AUDIO_CLR_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_AUDIO_CLR_DITHER_ENABLE_MASK 0x20000u +#define CCM_ANALOG_PLL_AUDIO_CLR_DITHER_ENABLE_SHIFT 17 +#define CCM_ANALOG_PLL_AUDIO_CLR_PFD_OFFSET_EN_MASK 0x40000u +#define CCM_ANALOG_PLL_AUDIO_CLR_PFD_OFFSET_EN_SHIFT 18 +#define CCM_ANALOG_PLL_AUDIO_CLR_TEST_DIV_SELECT_MASK 0x180000u +#define CCM_ANALOG_PLL_AUDIO_CLR_TEST_DIV_SELECT_SHIFT 19 +#define CCM_ANALOG_PLL_AUDIO_CLR_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_CLR_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_CLR_TEST_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_AUDIO_CLR_RSVD0_MASK 0x200000u +#define CCM_ANALOG_PLL_AUDIO_CLR_RSVD0_SHIFT 21 +#define CCM_ANALOG_PLL_AUDIO_CLR_POST_DIV_SEL_MASK 0xC00000u +#define CCM_ANALOG_PLL_AUDIO_CLR_POST_DIV_SEL_SHIFT 22 +#define CCM_ANALOG_PLL_AUDIO_CLR_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_CLR_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_AUDIO_CLR_POST_DIV_SEL_MASK) +#define CCM_ANALOG_PLL_AUDIO_CLR_PLL_AUDIO_OVERRIDE_MASK 0x1000000u +#define CCM_ANALOG_PLL_AUDIO_CLR_PLL_AUDIO_OVERRIDE_SHIFT 24 +#define CCM_ANALOG_PLL_AUDIO_CLR_RSVD1_MASK 0x7E000000u +#define CCM_ANALOG_PLL_AUDIO_CLR_RSVD1_SHIFT 25 +#define CCM_ANALOG_PLL_AUDIO_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_CLR_RSVD1_SHIFT))&CCM_ANALOG_PLL_AUDIO_CLR_RSVD1_MASK) +#define CCM_ANALOG_PLL_AUDIO_CLR_LOCK_MASK 0x80000000u +#define CCM_ANALOG_PLL_AUDIO_CLR_LOCK_SHIFT 31 +/* PLL_AUDIO_TOG Bit Fields */ +#define CCM_ANALOG_PLL_AUDIO_TOG_DIV_SELECT_MASK 0x7Fu +#define CCM_ANALOG_PLL_AUDIO_TOG_DIV_SELECT_SHIFT 0 +#define CCM_ANALOG_PLL_AUDIO_TOG_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TOG_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_TOG_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_AUDIO_TOG_HALF_LF_MASK 0x80u +#define CCM_ANALOG_PLL_AUDIO_TOG_HALF_LF_SHIFT 7 +#define CCM_ANALOG_PLL_AUDIO_TOG_DOUBLE_LF_MASK 0x100u +#define CCM_ANALOG_PLL_AUDIO_TOG_DOUBLE_LF_SHIFT 8 +#define CCM_ANALOG_PLL_AUDIO_TOG_HALF_CP_MASK 0x200u +#define CCM_ANALOG_PLL_AUDIO_TOG_HALF_CP_SHIFT 9 +#define CCM_ANALOG_PLL_AUDIO_TOG_DOUBLE_CP_MASK 0x400u +#define CCM_ANALOG_PLL_AUDIO_TOG_DOUBLE_CP_SHIFT 10 +#define CCM_ANALOG_PLL_AUDIO_TOG_HOLD_RING_OFF_MASK 0x800u +#define CCM_ANALOG_PLL_AUDIO_TOG_HOLD_RING_OFF_SHIFT 11 +#define CCM_ANALOG_PLL_AUDIO_TOG_POWERDOWN_MASK 0x1000u +#define CCM_ANALOG_PLL_AUDIO_TOG_POWERDOWN_SHIFT 12 +#define CCM_ANALOG_PLL_AUDIO_TOG_ENABLE_CLK_MASK 0x2000u +#define CCM_ANALOG_PLL_AUDIO_TOG_ENABLE_CLK_SHIFT 13 +#define CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_CLK_SRC_MASK 0xC000u +#define CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_CLK_SRC_MASK) +#define CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_MASK 0x10000u +#define CCM_ANALOG_PLL_AUDIO_TOG_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_AUDIO_TOG_DITHER_ENABLE_MASK 0x20000u +#define CCM_ANALOG_PLL_AUDIO_TOG_DITHER_ENABLE_SHIFT 17 +#define CCM_ANALOG_PLL_AUDIO_TOG_PFD_OFFSET_EN_MASK 0x40000u +#define CCM_ANALOG_PLL_AUDIO_TOG_PFD_OFFSET_EN_SHIFT 18 +#define CCM_ANALOG_PLL_AUDIO_TOG_TEST_DIV_SELECT_MASK 0x180000u +#define CCM_ANALOG_PLL_AUDIO_TOG_TEST_DIV_SELECT_SHIFT 19 +#define CCM_ANALOG_PLL_AUDIO_TOG_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TOG_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_AUDIO_TOG_TEST_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_AUDIO_TOG_RSVD0_MASK 0x200000u +#define CCM_ANALOG_PLL_AUDIO_TOG_RSVD0_SHIFT 21 +#define CCM_ANALOG_PLL_AUDIO_TOG_POST_DIV_SEL_MASK 0xC00000u +#define CCM_ANALOG_PLL_AUDIO_TOG_POST_DIV_SEL_SHIFT 22 +#define CCM_ANALOG_PLL_AUDIO_TOG_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TOG_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_AUDIO_TOG_POST_DIV_SEL_MASK) +#define CCM_ANALOG_PLL_AUDIO_TOG_PLL_AUDIO_OVERRIDE_MASK 0x1000000u +#define CCM_ANALOG_PLL_AUDIO_TOG_PLL_AUDIO_OVERRIDE_SHIFT 24 +#define CCM_ANALOG_PLL_AUDIO_TOG_RSVD1_MASK 0x7E000000u +#define CCM_ANALOG_PLL_AUDIO_TOG_RSVD1_SHIFT 25 +#define CCM_ANALOG_PLL_AUDIO_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_TOG_RSVD1_SHIFT))&CCM_ANALOG_PLL_AUDIO_TOG_RSVD1_MASK) +#define CCM_ANALOG_PLL_AUDIO_TOG_LOCK_MASK 0x80000000u +#define CCM_ANALOG_PLL_AUDIO_TOG_LOCK_SHIFT 31 +/* PLL_AUDIO_SS Bit Fields */ +#define CCM_ANALOG_PLL_AUDIO_SS_STEP_MASK 0x7FFFu +#define CCM_ANALOG_PLL_AUDIO_SS_STEP_SHIFT 0 +#define CCM_ANALOG_PLL_AUDIO_SS_STEP(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SS_STEP_SHIFT))&CCM_ANALOG_PLL_AUDIO_SS_STEP_MASK) +#define CCM_ANALOG_PLL_AUDIO_SS_ENABLE_MASK 0x8000u +#define CCM_ANALOG_PLL_AUDIO_SS_ENABLE_SHIFT 15 +#define CCM_ANALOG_PLL_AUDIO_SS_STOP_MASK 0xFFFF0000u +#define CCM_ANALOG_PLL_AUDIO_SS_STOP_SHIFT 16 +#define CCM_ANALOG_PLL_AUDIO_SS_STOP(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_SS_STOP_SHIFT))&CCM_ANALOG_PLL_AUDIO_SS_STOP_MASK) +/* PLL_AUDIO_NUM Bit Fields */ +#define CCM_ANALOG_PLL_AUDIO_NUM_A_MASK 0x3FFFFFFFu +#define CCM_ANALOG_PLL_AUDIO_NUM_A_SHIFT 0 +#define CCM_ANALOG_PLL_AUDIO_NUM_A(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_NUM_A_SHIFT))&CCM_ANALOG_PLL_AUDIO_NUM_A_MASK) +#define CCM_ANALOG_PLL_AUDIO_NUM_RSVD0_MASK 0xC0000000u +#define CCM_ANALOG_PLL_AUDIO_NUM_RSVD0_SHIFT 30 +#define CCM_ANALOG_PLL_AUDIO_NUM_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_NUM_RSVD0_SHIFT))&CCM_ANALOG_PLL_AUDIO_NUM_RSVD0_MASK) +/* PLL_AUDIO_DENOM Bit Fields */ +#define CCM_ANALOG_PLL_AUDIO_DENOM_B_MASK 0x3FFFFFFFu +#define CCM_ANALOG_PLL_AUDIO_DENOM_B_SHIFT 0 +#define CCM_ANALOG_PLL_AUDIO_DENOM_B(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_DENOM_B_SHIFT))&CCM_ANALOG_PLL_AUDIO_DENOM_B_MASK) +#define CCM_ANALOG_PLL_AUDIO_DENOM_RSVD0_MASK 0xC0000000u +#define CCM_ANALOG_PLL_AUDIO_DENOM_RSVD0_SHIFT 30 +#define CCM_ANALOG_PLL_AUDIO_DENOM_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_AUDIO_DENOM_RSVD0_SHIFT))&CCM_ANALOG_PLL_AUDIO_DENOM_RSVD0_MASK) +/* PLL_VIDEO Bit Fields */ +#define CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK 0x7Fu +#define CCM_ANALOG_PLL_VIDEO_DIV_SELECT_SHIFT 0 +#define CCM_ANALOG_PLL_VIDEO_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_VIDEO_HALF_LF_MASK 0x80u +#define CCM_ANALOG_PLL_VIDEO_HALF_LF_SHIFT 7 +#define CCM_ANALOG_PLL_VIDEO_DOUBLE_LF_MASK 0x100u +#define CCM_ANALOG_PLL_VIDEO_DOUBLE_LF_SHIFT 8 +#define CCM_ANALOG_PLL_VIDEO_HALF_CP_MASK 0x200u +#define CCM_ANALOG_PLL_VIDEO_HALF_CP_SHIFT 9 +#define CCM_ANALOG_PLL_VIDEO_DOUBLE_CP_MASK 0x400u +#define CCM_ANALOG_PLL_VIDEO_DOUBLE_CP_SHIFT 10 +#define CCM_ANALOG_PLL_VIDEO_HOLD_RING_OFF_MASK 0x800u +#define CCM_ANALOG_PLL_VIDEO_HOLD_RING_OFF_SHIFT 11 +#define CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK 0x1000u +#define CCM_ANALOG_PLL_VIDEO_POWERDOWN_SHIFT 12 +#define CCM_ANALOG_PLL_VIDEO_ENABLE_CLK_MASK 0x2000u +#define CCM_ANALOG_PLL_VIDEO_ENABLE_CLK_SHIFT 13 +#define CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK 0xC000u +#define CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK) +#define CCM_ANALOG_PLL_VIDEO_BYPASS_MASK 0x10000u +#define CCM_ANALOG_PLL_VIDEO_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_VIDEO_DITHER_ENABLE_MASK 0x20000u +#define CCM_ANALOG_PLL_VIDEO_DITHER_ENABLE_SHIFT 17 +#define CCM_ANALOG_PLL_VIDEO_PFD_OFFSET_EN_MASK 0x40000u +#define CCM_ANALOG_PLL_VIDEO_PFD_OFFSET_EN_SHIFT 18 +#define CCM_ANALOG_PLL_VIDEO_TEST_DIV_SELECT_MASK 0x180000u +#define CCM_ANALOG_PLL_VIDEO_TEST_DIV_SELECT_SHIFT 19 +#define CCM_ANALOG_PLL_VIDEO_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_TEST_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_VIDEO_RSVD0_MASK 0x200000u +#define CCM_ANALOG_PLL_VIDEO_RSVD0_SHIFT 21 +#define CCM_ANALOG_PLL_VIDEO_POST_DIV_SEL_MASK 0xC00000u +#define CCM_ANALOG_PLL_VIDEO_POST_DIV_SEL_SHIFT 22 +#define CCM_ANALOG_PLL_VIDEO_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_VIDEO_POST_DIV_SEL_MASK) +#define CCM_ANALOG_PLL_VIDEO_PLL_VIDEO_OVERRIDE_MASK 0x1000000u +#define CCM_ANALOG_PLL_VIDEO_PLL_VIDEO_OVERRIDE_SHIFT 24 +#define CCM_ANALOG_PLL_VIDEO_RSVD1_MASK 0x7E000000u +#define CCM_ANALOG_PLL_VIDEO_RSVD1_SHIFT 25 +#define CCM_ANALOG_PLL_VIDEO_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_RSVD1_SHIFT))&CCM_ANALOG_PLL_VIDEO_RSVD1_MASK) +#define CCM_ANALOG_PLL_VIDEO_LOCK_MASK 0x80000000u +#define CCM_ANALOG_PLL_VIDEO_LOCK_SHIFT 31 +/* PLL_VIDEO_SET Bit Fields */ +#define CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT_MASK 0x7Fu +#define CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT_SHIFT 0 +#define CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_VIDEO_SET_HALF_LF_MASK 0x80u +#define CCM_ANALOG_PLL_VIDEO_SET_HALF_LF_SHIFT 7 +#define CCM_ANALOG_PLL_VIDEO_SET_DOUBLE_LF_MASK 0x100u +#define CCM_ANALOG_PLL_VIDEO_SET_DOUBLE_LF_SHIFT 8 +#define CCM_ANALOG_PLL_VIDEO_SET_HALF_CP_MASK 0x200u +#define CCM_ANALOG_PLL_VIDEO_SET_HALF_CP_SHIFT 9 +#define CCM_ANALOG_PLL_VIDEO_SET_DOUBLE_CP_MASK 0x400u +#define CCM_ANALOG_PLL_VIDEO_SET_DOUBLE_CP_SHIFT 10 +#define CCM_ANALOG_PLL_VIDEO_SET_HOLD_RING_OFF_MASK 0x800u +#define CCM_ANALOG_PLL_VIDEO_SET_HOLD_RING_OFF_SHIFT 11 +#define CCM_ANALOG_PLL_VIDEO_SET_POWERDOWN_MASK 0x1000u +#define CCM_ANALOG_PLL_VIDEO_SET_POWERDOWN_SHIFT 12 +#define CCM_ANALOG_PLL_VIDEO_SET_ENABLE_CLK_MASK 0x2000u +#define CCM_ANALOG_PLL_VIDEO_SET_ENABLE_CLK_SHIFT 13 +#define CCM_ANALOG_PLL_VIDEO_SET_BYPASS_CLK_SRC_MASK 0xC000u +#define CCM_ANALOG_PLL_VIDEO_SET_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_VIDEO_SET_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SET_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_VIDEO_SET_BYPASS_CLK_SRC_MASK) +#define CCM_ANALOG_PLL_VIDEO_SET_BYPASS_MASK 0x10000u +#define CCM_ANALOG_PLL_VIDEO_SET_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_VIDEO_SET_DITHER_ENABLE_MASK 0x20000u +#define CCM_ANALOG_PLL_VIDEO_SET_DITHER_ENABLE_SHIFT 17 +#define CCM_ANALOG_PLL_VIDEO_SET_PFD_OFFSET_EN_MASK 0x40000u +#define CCM_ANALOG_PLL_VIDEO_SET_PFD_OFFSET_EN_SHIFT 18 +#define CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT_MASK 0x180000u +#define CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT_SHIFT 19 +#define CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_VIDEO_SET_RSVD0_MASK 0x200000u +#define CCM_ANALOG_PLL_VIDEO_SET_RSVD0_SHIFT 21 +#define CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL_MASK 0xC00000u +#define CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL_SHIFT 22 +#define CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL_MASK) +#define CCM_ANALOG_PLL_VIDEO_SET_PLL_VIDEO_OVERRIDE_MASK 0x1000000u +#define CCM_ANALOG_PLL_VIDEO_SET_PLL_VIDEO_OVERRIDE_SHIFT 24 +#define CCM_ANALOG_PLL_VIDEO_SET_RSVD1_MASK 0x7E000000u +#define CCM_ANALOG_PLL_VIDEO_SET_RSVD1_SHIFT 25 +#define CCM_ANALOG_PLL_VIDEO_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SET_RSVD1_SHIFT))&CCM_ANALOG_PLL_VIDEO_SET_RSVD1_MASK) +#define CCM_ANALOG_PLL_VIDEO_SET_LOCK_MASK 0x80000000u +#define CCM_ANALOG_PLL_VIDEO_SET_LOCK_SHIFT 31 +/* PLL_VIDEO_CLR Bit Fields */ +#define CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT_MASK 0x7Fu +#define CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT_SHIFT 0 +#define CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_VIDEO_CLR_HALF_LF_MASK 0x80u +#define CCM_ANALOG_PLL_VIDEO_CLR_HALF_LF_SHIFT 7 +#define CCM_ANALOG_PLL_VIDEO_CLR_DOUBLE_LF_MASK 0x100u +#define CCM_ANALOG_PLL_VIDEO_CLR_DOUBLE_LF_SHIFT 8 +#define CCM_ANALOG_PLL_VIDEO_CLR_HALF_CP_MASK 0x200u +#define CCM_ANALOG_PLL_VIDEO_CLR_HALF_CP_SHIFT 9 +#define CCM_ANALOG_PLL_VIDEO_CLR_DOUBLE_CP_MASK 0x400u +#define CCM_ANALOG_PLL_VIDEO_CLR_DOUBLE_CP_SHIFT 10 +#define CCM_ANALOG_PLL_VIDEO_CLR_HOLD_RING_OFF_MASK 0x800u +#define CCM_ANALOG_PLL_VIDEO_CLR_HOLD_RING_OFF_SHIFT 11 +#define CCM_ANALOG_PLL_VIDEO_CLR_POWERDOWN_MASK 0x1000u +#define CCM_ANALOG_PLL_VIDEO_CLR_POWERDOWN_SHIFT 12 +#define CCM_ANALOG_PLL_VIDEO_CLR_ENABLE_CLK_MASK 0x2000u +#define CCM_ANALOG_PLL_VIDEO_CLR_ENABLE_CLK_SHIFT 13 +#define CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_CLK_SRC_MASK 0xC000u +#define CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_CLK_SRC_MASK) +#define CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_MASK 0x10000u +#define CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_VIDEO_CLR_DITHER_ENABLE_MASK 0x20000u +#define CCM_ANALOG_PLL_VIDEO_CLR_DITHER_ENABLE_SHIFT 17 +#define CCM_ANALOG_PLL_VIDEO_CLR_PFD_OFFSET_EN_MASK 0x40000u +#define CCM_ANALOG_PLL_VIDEO_CLR_PFD_OFFSET_EN_SHIFT 18 +#define CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT_MASK 0x180000u +#define CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT_SHIFT 19 +#define CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_VIDEO_CLR_RSVD0_MASK 0x200000u +#define CCM_ANALOG_PLL_VIDEO_CLR_RSVD0_SHIFT 21 +#define CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL_MASK 0xC00000u +#define CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL_SHIFT 22 +#define CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL_MASK) +#define CCM_ANALOG_PLL_VIDEO_CLR_PLL_VIDEO_OVERRIDE_MASK 0x1000000u +#define CCM_ANALOG_PLL_VIDEO_CLR_PLL_VIDEO_OVERRIDE_SHIFT 24 +#define CCM_ANALOG_PLL_VIDEO_CLR_RSVD1_MASK 0x7E000000u +#define CCM_ANALOG_PLL_VIDEO_CLR_RSVD1_SHIFT 25 +#define CCM_ANALOG_PLL_VIDEO_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_CLR_RSVD1_SHIFT))&CCM_ANALOG_PLL_VIDEO_CLR_RSVD1_MASK) +#define CCM_ANALOG_PLL_VIDEO_CLR_LOCK_MASK 0x80000000u +#define CCM_ANALOG_PLL_VIDEO_CLR_LOCK_SHIFT 31 +/* PLL_VIDEO_TOG Bit Fields */ +#define CCM_ANALOG_PLL_VIDEO_TOG_DIV_SELECT_MASK 0x7Fu +#define CCM_ANALOG_PLL_VIDEO_TOG_DIV_SELECT_SHIFT 0 +#define CCM_ANALOG_PLL_VIDEO_TOG_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TOG_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_TOG_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_VIDEO_TOG_HALF_LF_MASK 0x80u +#define CCM_ANALOG_PLL_VIDEO_TOG_HALF_LF_SHIFT 7 +#define CCM_ANALOG_PLL_VIDEO_TOG_DOUBLE_LF_MASK 0x100u +#define CCM_ANALOG_PLL_VIDEO_TOG_DOUBLE_LF_SHIFT 8 +#define CCM_ANALOG_PLL_VIDEO_TOG_HALF_CP_MASK 0x200u +#define CCM_ANALOG_PLL_VIDEO_TOG_HALF_CP_SHIFT 9 +#define CCM_ANALOG_PLL_VIDEO_TOG_DOUBLE_CP_MASK 0x400u +#define CCM_ANALOG_PLL_VIDEO_TOG_DOUBLE_CP_SHIFT 10 +#define CCM_ANALOG_PLL_VIDEO_TOG_HOLD_RING_OFF_MASK 0x800u +#define CCM_ANALOG_PLL_VIDEO_TOG_HOLD_RING_OFF_SHIFT 11 +#define CCM_ANALOG_PLL_VIDEO_TOG_POWERDOWN_MASK 0x1000u +#define CCM_ANALOG_PLL_VIDEO_TOG_POWERDOWN_SHIFT 12 +#define CCM_ANALOG_PLL_VIDEO_TOG_ENABLE_CLK_MASK 0x2000u +#define CCM_ANALOG_PLL_VIDEO_TOG_ENABLE_CLK_SHIFT 13 +#define CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_CLK_SRC_MASK 0xC000u +#define CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_CLK_SRC_SHIFT 14 +#define CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_CLK_SRC(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_CLK_SRC_SHIFT))&CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_CLK_SRC_MASK) +#define CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_MASK 0x10000u +#define CCM_ANALOG_PLL_VIDEO_TOG_BYPASS_SHIFT 16 +#define CCM_ANALOG_PLL_VIDEO_TOG_DITHER_ENABLE_MASK 0x20000u +#define CCM_ANALOG_PLL_VIDEO_TOG_DITHER_ENABLE_SHIFT 17 +#define CCM_ANALOG_PLL_VIDEO_TOG_PFD_OFFSET_EN_MASK 0x40000u +#define CCM_ANALOG_PLL_VIDEO_TOG_PFD_OFFSET_EN_SHIFT 18 +#define CCM_ANALOG_PLL_VIDEO_TOG_TEST_DIV_SELECT_MASK 0x180000u +#define CCM_ANALOG_PLL_VIDEO_TOG_TEST_DIV_SELECT_SHIFT 19 +#define CCM_ANALOG_PLL_VIDEO_TOG_TEST_DIV_SELECT(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TOG_TEST_DIV_SELECT_SHIFT))&CCM_ANALOG_PLL_VIDEO_TOG_TEST_DIV_SELECT_MASK) +#define CCM_ANALOG_PLL_VIDEO_TOG_RSVD0_MASK 0x200000u +#define CCM_ANALOG_PLL_VIDEO_TOG_RSVD0_SHIFT 21 +#define CCM_ANALOG_PLL_VIDEO_TOG_POST_DIV_SEL_MASK 0xC00000u +#define CCM_ANALOG_PLL_VIDEO_TOG_POST_DIV_SEL_SHIFT 22 +#define CCM_ANALOG_PLL_VIDEO_TOG_POST_DIV_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TOG_POST_DIV_SEL_SHIFT))&CCM_ANALOG_PLL_VIDEO_TOG_POST_DIV_SEL_MASK) +#define CCM_ANALOG_PLL_VIDEO_TOG_PLL_VIDEO_OVERRIDE_MASK 0x1000000u +#define CCM_ANALOG_PLL_VIDEO_TOG_PLL_VIDEO_OVERRIDE_SHIFT 24 +#define CCM_ANALOG_PLL_VIDEO_TOG_RSVD1_MASK 0x7E000000u +#define CCM_ANALOG_PLL_VIDEO_TOG_RSVD1_SHIFT 25 +#define CCM_ANALOG_PLL_VIDEO_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_TOG_RSVD1_SHIFT))&CCM_ANALOG_PLL_VIDEO_TOG_RSVD1_MASK) +#define CCM_ANALOG_PLL_VIDEO_TOG_LOCK_MASK 0x80000000u +#define CCM_ANALOG_PLL_VIDEO_TOG_LOCK_SHIFT 31 +/* PLL_VIDEO_SS Bit Fields */ +#define CCM_ANALOG_PLL_VIDEO_SS_STEP_MASK 0x7FFFu +#define CCM_ANALOG_PLL_VIDEO_SS_STEP_SHIFT 0 +#define CCM_ANALOG_PLL_VIDEO_SS_STEP(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SS_STEP_SHIFT))&CCM_ANALOG_PLL_VIDEO_SS_STEP_MASK) +#define CCM_ANALOG_PLL_VIDEO_SS_ENABLE_MASK 0x8000u +#define CCM_ANALOG_PLL_VIDEO_SS_ENABLE_SHIFT 15 +#define CCM_ANALOG_PLL_VIDEO_SS_STOP_MASK 0xFFFF0000u +#define CCM_ANALOG_PLL_VIDEO_SS_STOP_SHIFT 16 +#define CCM_ANALOG_PLL_VIDEO_SS_STOP(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_SS_STOP_SHIFT))&CCM_ANALOG_PLL_VIDEO_SS_STOP_MASK) +/* PLL_VIDEO_NUM Bit Fields */ +#define CCM_ANALOG_PLL_VIDEO_NUM_A_MASK 0x3FFFFFFFu +#define CCM_ANALOG_PLL_VIDEO_NUM_A_SHIFT 0 +#define CCM_ANALOG_PLL_VIDEO_NUM_A(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_NUM_A_SHIFT))&CCM_ANALOG_PLL_VIDEO_NUM_A_MASK) +#define CCM_ANALOG_PLL_VIDEO_NUM_RSVD0_MASK 0xC0000000u +#define CCM_ANALOG_PLL_VIDEO_NUM_RSVD0_SHIFT 30 +#define CCM_ANALOG_PLL_VIDEO_NUM_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_NUM_RSVD0_SHIFT))&CCM_ANALOG_PLL_VIDEO_NUM_RSVD0_MASK) +/* PLL_VIDEO_DENOM Bit Fields */ +#define CCM_ANALOG_PLL_VIDEO_DENOM_B_MASK 0x3FFFFFFFu +#define CCM_ANALOG_PLL_VIDEO_DENOM_B_SHIFT 0 +#define CCM_ANALOG_PLL_VIDEO_DENOM_B(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_DENOM_B_SHIFT))&CCM_ANALOG_PLL_VIDEO_DENOM_B_MASK) +#define CCM_ANALOG_PLL_VIDEO_DENOM_RSVD0_MASK 0xC0000000u +#define CCM_ANALOG_PLL_VIDEO_DENOM_RSVD0_SHIFT 30 +#define CCM_ANALOG_PLL_VIDEO_DENOM_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_PLL_VIDEO_DENOM_RSVD0_SHIFT))&CCM_ANALOG_PLL_VIDEO_DENOM_RSVD0_MASK) +/* CLK_MISC0 Bit Fields */ +#define CCM_ANALOG_CLK_MISC0_LVDS1_CLK_SEL_MASK 0x1Fu +#define CCM_ANALOG_CLK_MISC0_LVDS1_CLK_SEL_SHIFT 0 +#define CCM_ANALOG_CLK_MISC0_LVDS1_CLK_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_LVDS1_CLK_SEL_SHIFT))&CCM_ANALOG_CLK_MISC0_LVDS1_CLK_SEL_MASK) +#define CCM_ANALOG_CLK_MISC0_LVDSCLK1_OBEN_MASK 0x20u +#define CCM_ANALOG_CLK_MISC0_LVDSCLK1_OBEN_SHIFT 5 +#define CCM_ANALOG_CLK_MISC0_LVDSCLK1_IBEN_MASK 0x40u +#define CCM_ANALOG_CLK_MISC0_LVDSCLK1_IBEN_SHIFT 6 +#define CCM_ANALOG_CLK_MISC0_ACLK2_PREDIV_MASK 0x80u +#define CCM_ANALOG_CLK_MISC0_ACLK2_PREDIV_SHIFT 7 +#define CCM_ANALOG_CLK_MISC0_RSVD0_MASK 0xFFFFFF00u +#define CCM_ANALOG_CLK_MISC0_RSVD0_SHIFT 8 +#define CCM_ANALOG_CLK_MISC0_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_RSVD0_SHIFT))&CCM_ANALOG_CLK_MISC0_RSVD0_MASK) +/* CLK_MISC0_SET Bit Fields */ +#define CCM_ANALOG_CLK_MISC0_SET_LVDS1_CLK_SEL_MASK 0x1Fu +#define CCM_ANALOG_CLK_MISC0_SET_LVDS1_CLK_SEL_SHIFT 0 +#define CCM_ANALOG_CLK_MISC0_SET_LVDS1_CLK_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_SET_LVDS1_CLK_SEL_SHIFT))&CCM_ANALOG_CLK_MISC0_SET_LVDS1_CLK_SEL_MASK) +#define CCM_ANALOG_CLK_MISC0_SET_LVDSCLK1_OBEN_MASK 0x20u +#define CCM_ANALOG_CLK_MISC0_SET_LVDSCLK1_OBEN_SHIFT 5 +#define CCM_ANALOG_CLK_MISC0_SET_LVDSCLK1_IBEN_MASK 0x40u +#define CCM_ANALOG_CLK_MISC0_SET_LVDSCLK1_IBEN_SHIFT 6 +#define CCM_ANALOG_CLK_MISC0_SET_ACLK2_PREDIV_MASK 0x80u +#define CCM_ANALOG_CLK_MISC0_SET_ACLK2_PREDIV_SHIFT 7 +#define CCM_ANALOG_CLK_MISC0_SET_RSVD0_MASK 0xFFFFFF00u +#define CCM_ANALOG_CLK_MISC0_SET_RSVD0_SHIFT 8 +#define CCM_ANALOG_CLK_MISC0_SET_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_SET_RSVD0_SHIFT))&CCM_ANALOG_CLK_MISC0_SET_RSVD0_MASK) +/* CLK_MISC0_CLR Bit Fields */ +#define CCM_ANALOG_CLK_MISC0_CLR_LVDS1_CLK_SEL_MASK 0x1Fu +#define CCM_ANALOG_CLK_MISC0_CLR_LVDS1_CLK_SEL_SHIFT 0 +#define CCM_ANALOG_CLK_MISC0_CLR_LVDS1_CLK_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_CLR_LVDS1_CLK_SEL_SHIFT))&CCM_ANALOG_CLK_MISC0_CLR_LVDS1_CLK_SEL_MASK) +#define CCM_ANALOG_CLK_MISC0_CLR_LVDSCLK1_OBEN_MASK 0x20u +#define CCM_ANALOG_CLK_MISC0_CLR_LVDSCLK1_OBEN_SHIFT 5 +#define CCM_ANALOG_CLK_MISC0_CLR_LVDSCLK1_IBEN_MASK 0x40u +#define CCM_ANALOG_CLK_MISC0_CLR_LVDSCLK1_IBEN_SHIFT 6 +#define CCM_ANALOG_CLK_MISC0_CLR_ACLK2_PREDIV_MASK 0x80u +#define CCM_ANALOG_CLK_MISC0_CLR_ACLK2_PREDIV_SHIFT 7 +#define CCM_ANALOG_CLK_MISC0_CLR_RSVD0_MASK 0xFFFFFF00u +#define CCM_ANALOG_CLK_MISC0_CLR_RSVD0_SHIFT 8 +#define CCM_ANALOG_CLK_MISC0_CLR_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_CLR_RSVD0_SHIFT))&CCM_ANALOG_CLK_MISC0_CLR_RSVD0_MASK) +/* CLK_MISC0_TOG Bit Fields */ +#define CCM_ANALOG_CLK_MISC0_TOG_LVDS1_CLK_SEL_MASK 0x1Fu +#define CCM_ANALOG_CLK_MISC0_TOG_LVDS1_CLK_SEL_SHIFT 0 +#define CCM_ANALOG_CLK_MISC0_TOG_LVDS1_CLK_SEL(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_TOG_LVDS1_CLK_SEL_SHIFT))&CCM_ANALOG_CLK_MISC0_TOG_LVDS1_CLK_SEL_MASK) +#define CCM_ANALOG_CLK_MISC0_TOG_LVDSCLK1_OBEN_MASK 0x20u +#define CCM_ANALOG_CLK_MISC0_TOG_LVDSCLK1_OBEN_SHIFT 5 +#define CCM_ANALOG_CLK_MISC0_TOG_LVDSCLK1_IBEN_MASK 0x40u +#define CCM_ANALOG_CLK_MISC0_TOG_LVDSCLK1_IBEN_SHIFT 6 +#define CCM_ANALOG_CLK_MISC0_TOG_ACLK2_PREDIV_MASK 0x80u +#define CCM_ANALOG_CLK_MISC0_TOG_ACLK2_PREDIV_SHIFT 7 +#define CCM_ANALOG_CLK_MISC0_TOG_RSVD0_MASK 0xFFFFFF00u +#define CCM_ANALOG_CLK_MISC0_TOG_RSVD0_SHIFT 8 +#define CCM_ANALOG_CLK_MISC0_TOG_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<CCM_ANALOG_CLK_MISC0_TOG_RSVD0_SHIFT))&CCM_ANALOG_CLK_MISC0_TOG_RSVD0_MASK) + +/* REG_1P0A Bit Fields */ +#define PMU_REG_1P0A_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_1P0A_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_1P0A_ENABLE_BO_MASK 0x2u +#define PMU_REG_1P0A_ENABLE_BO_SHIFT 1 +#define PMU_REG_1P0A_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_1P0A_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_1P0A_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_1P0A_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_1P0A_BO_OFFSET_MASK 0x70u +#define PMU_REG_1P0A_BO_OFFSET_SHIFT 4 +#define PMU_REG_1P0A_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_BO_OFFSET_SHIFT))&PMU_REG_1P0A_BO_OFFSET_MASK) +#define PMU_REG_1P0A_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_1P0A_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_1P0A_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_1P0A_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_1P0A_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_OUTPUT_TRG_SHIFT))&PMU_REG_1P0A_OUTPUT_TRG_MASK) +#define PMU_REG_1P0A_RSVD0_MASK 0xE000u +#define PMU_REG_1P0A_RSVD0_SHIFT 13 +#define PMU_REG_1P0A_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_RSVD0_SHIFT))&PMU_REG_1P0A_RSVD0_MASK) +#define PMU_REG_1P0A_BO_MASK 0x10000u +#define PMU_REG_1P0A_BO_SHIFT 16 +#define PMU_REG_1P0A_OK_MASK 0x20000u +#define PMU_REG_1P0A_OK_SHIFT 17 +#define PMU_REG_1P0A_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_1P0A_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_1P0A_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_1P0A_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_1P0A_REG_TEST_MASK 0xF00000u +#define PMU_REG_1P0A_REG_TEST_SHIFT 20 +#define PMU_REG_1P0A_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_REG_TEST_SHIFT))&PMU_REG_1P0A_REG_TEST_MASK) +#define PMU_REG_1P0A_RSVD1_MASK 0xFF000000u +#define PMU_REG_1P0A_RSVD1_SHIFT 24 +#define PMU_REG_1P0A_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_RSVD1_SHIFT))&PMU_REG_1P0A_RSVD1_MASK) +/* REG_1P0A_SET Bit Fields */ +#define PMU_REG_1P0A_SET_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_1P0A_SET_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_1P0A_SET_ENABLE_BO_MASK 0x2u +#define PMU_REG_1P0A_SET_ENABLE_BO_SHIFT 1 +#define PMU_REG_1P0A_SET_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_1P0A_SET_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_1P0A_SET_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_1P0A_SET_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_1P0A_SET_BO_OFFSET_MASK 0x70u +#define PMU_REG_1P0A_SET_BO_OFFSET_SHIFT 4 +#define PMU_REG_1P0A_SET_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_SET_BO_OFFSET_SHIFT))&PMU_REG_1P0A_SET_BO_OFFSET_MASK) +#define PMU_REG_1P0A_SET_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_1P0A_SET_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_1P0A_SET_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_1P0A_SET_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_1P0A_SET_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_SET_OUTPUT_TRG_SHIFT))&PMU_REG_1P0A_SET_OUTPUT_TRG_MASK) +#define PMU_REG_1P0A_SET_RSVD0_MASK 0xE000u +#define PMU_REG_1P0A_SET_RSVD0_SHIFT 13 +#define PMU_REG_1P0A_SET_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_SET_RSVD0_SHIFT))&PMU_REG_1P0A_SET_RSVD0_MASK) +#define PMU_REG_1P0A_SET_BO_MASK 0x10000u +#define PMU_REG_1P0A_SET_BO_SHIFT 16 +#define PMU_REG_1P0A_SET_OK_MASK 0x20000u +#define PMU_REG_1P0A_SET_OK_SHIFT 17 +#define PMU_REG_1P0A_SET_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_1P0A_SET_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_1P0A_SET_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_1P0A_SET_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_1P0A_SET_REG_TEST_MASK 0xF00000u +#define PMU_REG_1P0A_SET_REG_TEST_SHIFT 20 +#define PMU_REG_1P0A_SET_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_SET_REG_TEST_SHIFT))&PMU_REG_1P0A_SET_REG_TEST_MASK) +#define PMU_REG_1P0A_SET_RSVD1_MASK 0xFF000000u +#define PMU_REG_1P0A_SET_RSVD1_SHIFT 24 +#define PMU_REG_1P0A_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_SET_RSVD1_SHIFT))&PMU_REG_1P0A_SET_RSVD1_MASK) +/* REG_1P0A_CLR Bit Fields */ +#define PMU_REG_1P0A_CLR_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_1P0A_CLR_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_1P0A_CLR_ENABLE_BO_MASK 0x2u +#define PMU_REG_1P0A_CLR_ENABLE_BO_SHIFT 1 +#define PMU_REG_1P0A_CLR_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_1P0A_CLR_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_1P0A_CLR_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_1P0A_CLR_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_1P0A_CLR_BO_OFFSET_MASK 0x70u +#define PMU_REG_1P0A_CLR_BO_OFFSET_SHIFT 4 +#define PMU_REG_1P0A_CLR_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_CLR_BO_OFFSET_SHIFT))&PMU_REG_1P0A_CLR_BO_OFFSET_MASK) +#define PMU_REG_1P0A_CLR_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_1P0A_CLR_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_1P0A_CLR_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_1P0A_CLR_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_1P0A_CLR_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_CLR_OUTPUT_TRG_SHIFT))&PMU_REG_1P0A_CLR_OUTPUT_TRG_MASK) +#define PMU_REG_1P0A_CLR_RSVD0_MASK 0xE000u +#define PMU_REG_1P0A_CLR_RSVD0_SHIFT 13 +#define PMU_REG_1P0A_CLR_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_CLR_RSVD0_SHIFT))&PMU_REG_1P0A_CLR_RSVD0_MASK) +#define PMU_REG_1P0A_CLR_BO_MASK 0x10000u +#define PMU_REG_1P0A_CLR_BO_SHIFT 16 +#define PMU_REG_1P0A_CLR_OK_MASK 0x20000u +#define PMU_REG_1P0A_CLR_OK_SHIFT 17 +#define PMU_REG_1P0A_CLR_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_1P0A_CLR_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_1P0A_CLR_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_1P0A_CLR_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_1P0A_CLR_REG_TEST_MASK 0xF00000u +#define PMU_REG_1P0A_CLR_REG_TEST_SHIFT 20 +#define PMU_REG_1P0A_CLR_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_CLR_REG_TEST_SHIFT))&PMU_REG_1P0A_CLR_REG_TEST_MASK) +#define PMU_REG_1P0A_CLR_RSVD1_MASK 0xFF000000u +#define PMU_REG_1P0A_CLR_RSVD1_SHIFT 24 +#define PMU_REG_1P0A_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_CLR_RSVD1_SHIFT))&PMU_REG_1P0A_CLR_RSVD1_MASK) +/* REG_1P0A_TOG Bit Fields */ +#define PMU_REG_1P0A_TOG_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_1P0A_TOG_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_1P0A_TOG_ENABLE_BO_MASK 0x2u +#define PMU_REG_1P0A_TOG_ENABLE_BO_SHIFT 1 +#define PMU_REG_1P0A_TOG_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_1P0A_TOG_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_1P0A_TOG_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_1P0A_TOG_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_1P0A_TOG_BO_OFFSET_MASK 0x70u +#define PMU_REG_1P0A_TOG_BO_OFFSET_SHIFT 4 +#define PMU_REG_1P0A_TOG_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_TOG_BO_OFFSET_SHIFT))&PMU_REG_1P0A_TOG_BO_OFFSET_MASK) +#define PMU_REG_1P0A_TOG_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_1P0A_TOG_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_1P0A_TOG_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_1P0A_TOG_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_1P0A_TOG_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_TOG_OUTPUT_TRG_SHIFT))&PMU_REG_1P0A_TOG_OUTPUT_TRG_MASK) +#define PMU_REG_1P0A_TOG_RSVD0_MASK 0xE000u +#define PMU_REG_1P0A_TOG_RSVD0_SHIFT 13 +#define PMU_REG_1P0A_TOG_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_TOG_RSVD0_SHIFT))&PMU_REG_1P0A_TOG_RSVD0_MASK) +#define PMU_REG_1P0A_TOG_BO_MASK 0x10000u +#define PMU_REG_1P0A_TOG_BO_SHIFT 16 +#define PMU_REG_1P0A_TOG_OK_MASK 0x20000u +#define PMU_REG_1P0A_TOG_OK_SHIFT 17 +#define PMU_REG_1P0A_TOG_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_1P0A_TOG_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_1P0A_TOG_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_1P0A_TOG_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_1P0A_TOG_REG_TEST_MASK 0xF00000u +#define PMU_REG_1P0A_TOG_REG_TEST_SHIFT 20 +#define PMU_REG_1P0A_TOG_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_TOG_REG_TEST_SHIFT))&PMU_REG_1P0A_TOG_REG_TEST_MASK) +#define PMU_REG_1P0A_TOG_RSVD1_MASK 0xFF000000u +#define PMU_REG_1P0A_TOG_RSVD1_SHIFT 24 +#define PMU_REG_1P0A_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0A_TOG_RSVD1_SHIFT))&PMU_REG_1P0A_TOG_RSVD1_MASK) +/* REG_1P0D Bit Fields */ +#define PMU_REG_1P0D_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_1P0D_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_1P0D_ENABLE_BO_MASK 0x2u +#define PMU_REG_1P0D_ENABLE_BO_SHIFT 1 +#define PMU_REG_1P0D_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_1P0D_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_1P0D_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_1P0D_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_1P0D_BO_OFFSET_MASK 0x70u +#define PMU_REG_1P0D_BO_OFFSET_SHIFT 4 +#define PMU_REG_1P0D_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_BO_OFFSET_SHIFT))&PMU_REG_1P0D_BO_OFFSET_MASK) +#define PMU_REG_1P0D_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_1P0D_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_1P0D_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_1P0D_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_1P0D_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_OUTPUT_TRG_SHIFT))&PMU_REG_1P0D_OUTPUT_TRG_MASK) +#define PMU_REG_1P0D_RSVD0_MASK 0xE000u +#define PMU_REG_1P0D_RSVD0_SHIFT 13 +#define PMU_REG_1P0D_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_RSVD0_SHIFT))&PMU_REG_1P0D_RSVD0_MASK) +#define PMU_REG_1P0D_BO_MASK 0x10000u +#define PMU_REG_1P0D_BO_SHIFT 16 +#define PMU_REG_1P0D_OK_MASK 0x20000u +#define PMU_REG_1P0D_OK_SHIFT 17 +#define PMU_REG_1P0D_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_1P0D_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_1P0D_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_1P0D_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_1P0D_REG_TEST_MASK 0xF00000u +#define PMU_REG_1P0D_REG_TEST_SHIFT 20 +#define PMU_REG_1P0D_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_REG_TEST_SHIFT))&PMU_REG_1P0D_REG_TEST_MASK) +#define PMU_REG_1P0D_RSVD1_MASK 0x7F000000u +#define PMU_REG_1P0D_RSVD1_SHIFT 24 +#define PMU_REG_1P0D_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_RSVD1_SHIFT))&PMU_REG_1P0D_RSVD1_MASK) +#define PMU_REG_1P0D_OVERRIDE_MASK 0x80000000u +#define PMU_REG_1P0D_OVERRIDE_SHIFT 31 +/* REG_1P0D_SET Bit Fields */ +#define PMU_REG_1P0D_SET_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_1P0D_SET_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_1P0D_SET_ENABLE_BO_MASK 0x2u +#define PMU_REG_1P0D_SET_ENABLE_BO_SHIFT 1 +#define PMU_REG_1P0D_SET_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_1P0D_SET_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_1P0D_SET_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_1P0D_SET_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_1P0D_SET_BO_OFFSET_MASK 0x70u +#define PMU_REG_1P0D_SET_BO_OFFSET_SHIFT 4 +#define PMU_REG_1P0D_SET_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_SET_BO_OFFSET_SHIFT))&PMU_REG_1P0D_SET_BO_OFFSET_MASK) +#define PMU_REG_1P0D_SET_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_1P0D_SET_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_1P0D_SET_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_1P0D_SET_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_1P0D_SET_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_SET_OUTPUT_TRG_SHIFT))&PMU_REG_1P0D_SET_OUTPUT_TRG_MASK) +#define PMU_REG_1P0D_SET_RSVD0_MASK 0xE000u +#define PMU_REG_1P0D_SET_RSVD0_SHIFT 13 +#define PMU_REG_1P0D_SET_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_SET_RSVD0_SHIFT))&PMU_REG_1P0D_SET_RSVD0_MASK) +#define PMU_REG_1P0D_SET_BO_MASK 0x10000u +#define PMU_REG_1P0D_SET_BO_SHIFT 16 +#define PMU_REG_1P0D_SET_OK_MASK 0x20000u +#define PMU_REG_1P0D_SET_OK_SHIFT 17 +#define PMU_REG_1P0D_SET_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_1P0D_SET_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_1P0D_SET_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_1P0D_SET_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_1P0D_SET_REG_TEST_MASK 0xF00000u +#define PMU_REG_1P0D_SET_REG_TEST_SHIFT 20 +#define PMU_REG_1P0D_SET_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_SET_REG_TEST_SHIFT))&PMU_REG_1P0D_SET_REG_TEST_MASK) +#define PMU_REG_1P0D_SET_RSVD1_MASK 0x7F000000u +#define PMU_REG_1P0D_SET_RSVD1_SHIFT 24 +#define PMU_REG_1P0D_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_SET_RSVD1_SHIFT))&PMU_REG_1P0D_SET_RSVD1_MASK) +#define PMU_REG_1P0D_SET_OVERRIDE_MASK 0x80000000u +#define PMU_REG_1P0D_SET_OVERRIDE_SHIFT 31 +/* REG_1P0D_CLR Bit Fields */ +#define PMU_REG_1P0D_CLR_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_1P0D_CLR_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_1P0D_CLR_ENABLE_BO_MASK 0x2u +#define PMU_REG_1P0D_CLR_ENABLE_BO_SHIFT 1 +#define PMU_REG_1P0D_CLR_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_1P0D_CLR_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_1P0D_CLR_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_1P0D_CLR_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_1P0D_CLR_BO_OFFSET_MASK 0x70u +#define PMU_REG_1P0D_CLR_BO_OFFSET_SHIFT 4 +#define PMU_REG_1P0D_CLR_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_CLR_BO_OFFSET_SHIFT))&PMU_REG_1P0D_CLR_BO_OFFSET_MASK) +#define PMU_REG_1P0D_CLR_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_1P0D_CLR_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_1P0D_CLR_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_1P0D_CLR_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_1P0D_CLR_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_CLR_OUTPUT_TRG_SHIFT))&PMU_REG_1P0D_CLR_OUTPUT_TRG_MASK) +#define PMU_REG_1P0D_CLR_RSVD0_MASK 0xE000u +#define PMU_REG_1P0D_CLR_RSVD0_SHIFT 13 +#define PMU_REG_1P0D_CLR_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_CLR_RSVD0_SHIFT))&PMU_REG_1P0D_CLR_RSVD0_MASK) +#define PMU_REG_1P0D_CLR_BO_MASK 0x10000u +#define PMU_REG_1P0D_CLR_BO_SHIFT 16 +#define PMU_REG_1P0D_CLR_OK_MASK 0x20000u +#define PMU_REG_1P0D_CLR_OK_SHIFT 17 +#define PMU_REG_1P0D_CLR_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_1P0D_CLR_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_1P0D_CLR_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_1P0D_CLR_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_1P0D_CLR_REG_TEST_MASK 0xF00000u +#define PMU_REG_1P0D_CLR_REG_TEST_SHIFT 20 +#define PMU_REG_1P0D_CLR_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_CLR_REG_TEST_SHIFT))&PMU_REG_1P0D_CLR_REG_TEST_MASK) +#define PMU_REG_1P0D_CLR_RSVD1_MASK 0x7F000000u +#define PMU_REG_1P0D_CLR_RSVD1_SHIFT 24 +#define PMU_REG_1P0D_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_CLR_RSVD1_SHIFT))&PMU_REG_1P0D_CLR_RSVD1_MASK) +#define PMU_REG_1P0D_CLR_OVERRIDE_MASK 0x80000000u +#define PMU_REG_1P0D_CLR_OVERRIDE_SHIFT 31 +/* REG_1P0D_TOG Bit Fields */ +#define PMU_REG_1P0D_TOG_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_1P0D_TOG_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_1P0D_TOG_ENABLE_BO_MASK 0x2u +#define PMU_REG_1P0D_TOG_ENABLE_BO_SHIFT 1 +#define PMU_REG_1P0D_TOG_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_1P0D_TOG_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_1P0D_TOG_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_1P0D_TOG_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_1P0D_TOG_BO_OFFSET_MASK 0x70u +#define PMU_REG_1P0D_TOG_BO_OFFSET_SHIFT 4 +#define PMU_REG_1P0D_TOG_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_TOG_BO_OFFSET_SHIFT))&PMU_REG_1P0D_TOG_BO_OFFSET_MASK) +#define PMU_REG_1P0D_TOG_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_1P0D_TOG_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_1P0D_TOG_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_1P0D_TOG_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_1P0D_TOG_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_TOG_OUTPUT_TRG_SHIFT))&PMU_REG_1P0D_TOG_OUTPUT_TRG_MASK) +#define PMU_REG_1P0D_TOG_RSVD0_MASK 0xE000u +#define PMU_REG_1P0D_TOG_RSVD0_SHIFT 13 +#define PMU_REG_1P0D_TOG_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_TOG_RSVD0_SHIFT))&PMU_REG_1P0D_TOG_RSVD0_MASK) +#define PMU_REG_1P0D_TOG_BO_MASK 0x10000u +#define PMU_REG_1P0D_TOG_BO_SHIFT 16 +#define PMU_REG_1P0D_TOG_OK_MASK 0x20000u +#define PMU_REG_1P0D_TOG_OK_SHIFT 17 +#define PMU_REG_1P0D_TOG_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_1P0D_TOG_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_1P0D_TOG_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_1P0D_TOG_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_1P0D_TOG_REG_TEST_MASK 0xF00000u +#define PMU_REG_1P0D_TOG_REG_TEST_SHIFT 20 +#define PMU_REG_1P0D_TOG_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_TOG_REG_TEST_SHIFT))&PMU_REG_1P0D_TOG_REG_TEST_MASK) +#define PMU_REG_1P0D_TOG_RSVD1_MASK 0x7F000000u +#define PMU_REG_1P0D_TOG_RSVD1_SHIFT 24 +#define PMU_REG_1P0D_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_1P0D_TOG_RSVD1_SHIFT))&PMU_REG_1P0D_TOG_RSVD1_MASK) +#define PMU_REG_1P0D_TOG_OVERRIDE_MASK 0x80000000u +#define PMU_REG_1P0D_TOG_OVERRIDE_SHIFT 31 +/* REG_HSIC_1P2 Bit Fields */ +#define PMU_REG_HSIC_1P2_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_HSIC_1P2_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_HSIC_1P2_ENABLE_BO_MASK 0x2u +#define PMU_REG_HSIC_1P2_ENABLE_BO_SHIFT 1 +#define PMU_REG_HSIC_1P2_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_HSIC_1P2_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_HSIC_1P2_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_HSIC_1P2_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_HSIC_1P2_BO_OFFSET_MASK 0x70u +#define PMU_REG_HSIC_1P2_BO_OFFSET_SHIFT 4 +#define PMU_REG_HSIC_1P2_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_BO_OFFSET_SHIFT))&PMU_REG_HSIC_1P2_BO_OFFSET_MASK) +#define PMU_REG_HSIC_1P2_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_HSIC_1P2_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_HSIC_1P2_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_HSIC_1P2_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_HSIC_1P2_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_OUTPUT_TRG_SHIFT))&PMU_REG_HSIC_1P2_OUTPUT_TRG_MASK) +#define PMU_REG_HSIC_1P2_RSVD0_MASK 0xE000u +#define PMU_REG_HSIC_1P2_RSVD0_SHIFT 13 +#define PMU_REG_HSIC_1P2_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_RSVD0_SHIFT))&PMU_REG_HSIC_1P2_RSVD0_MASK) +#define PMU_REG_HSIC_1P2_BO_MASK 0x10000u +#define PMU_REG_HSIC_1P2_BO_SHIFT 16 +#define PMU_REG_HSIC_1P2_OK_MASK 0x20000u +#define PMU_REG_HSIC_1P2_OK_SHIFT 17 +#define PMU_REG_HSIC_1P2_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_HSIC_1P2_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_HSIC_1P2_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_HSIC_1P2_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_HSIC_1P2_REG_TEST_MASK 0xF00000u +#define PMU_REG_HSIC_1P2_REG_TEST_SHIFT 20 +#define PMU_REG_HSIC_1P2_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_REG_TEST_SHIFT))&PMU_REG_HSIC_1P2_REG_TEST_MASK) +#define PMU_REG_HSIC_1P2_RSVD1_MASK 0x7F000000u +#define PMU_REG_HSIC_1P2_RSVD1_SHIFT 24 +#define PMU_REG_HSIC_1P2_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_RSVD1_SHIFT))&PMU_REG_HSIC_1P2_RSVD1_MASK) +#define PMU_REG_HSIC_1P2_OVERRIDE_MASK 0x80000000u +#define PMU_REG_HSIC_1P2_OVERRIDE_SHIFT 31 +/* REG_HSIC_1P2_SET Bit Fields */ +#define PMU_REG_HSIC_1P2_SET_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_HSIC_1P2_SET_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_HSIC_1P2_SET_ENABLE_BO_MASK 0x2u +#define PMU_REG_HSIC_1P2_SET_ENABLE_BO_SHIFT 1 +#define PMU_REG_HSIC_1P2_SET_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_HSIC_1P2_SET_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_HSIC_1P2_SET_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_HSIC_1P2_SET_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_HSIC_1P2_SET_BO_OFFSET_MASK 0x70u +#define PMU_REG_HSIC_1P2_SET_BO_OFFSET_SHIFT 4 +#define PMU_REG_HSIC_1P2_SET_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_SET_BO_OFFSET_SHIFT))&PMU_REG_HSIC_1P2_SET_BO_OFFSET_MASK) +#define PMU_REG_HSIC_1P2_SET_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_HSIC_1P2_SET_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_HSIC_1P2_SET_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_HSIC_1P2_SET_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_HSIC_1P2_SET_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_SET_OUTPUT_TRG_SHIFT))&PMU_REG_HSIC_1P2_SET_OUTPUT_TRG_MASK) +#define PMU_REG_HSIC_1P2_SET_RSVD0_MASK 0xE000u +#define PMU_REG_HSIC_1P2_SET_RSVD0_SHIFT 13 +#define PMU_REG_HSIC_1P2_SET_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_SET_RSVD0_SHIFT))&PMU_REG_HSIC_1P2_SET_RSVD0_MASK) +#define PMU_REG_HSIC_1P2_SET_BO_MASK 0x10000u +#define PMU_REG_HSIC_1P2_SET_BO_SHIFT 16 +#define PMU_REG_HSIC_1P2_SET_OK_MASK 0x20000u +#define PMU_REG_HSIC_1P2_SET_OK_SHIFT 17 +#define PMU_REG_HSIC_1P2_SET_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_HSIC_1P2_SET_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_HSIC_1P2_SET_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_HSIC_1P2_SET_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_HSIC_1P2_SET_REG_TEST_MASK 0xF00000u +#define PMU_REG_HSIC_1P2_SET_REG_TEST_SHIFT 20 +#define PMU_REG_HSIC_1P2_SET_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_SET_REG_TEST_SHIFT))&PMU_REG_HSIC_1P2_SET_REG_TEST_MASK) +#define PMU_REG_HSIC_1P2_SET_RSVD1_MASK 0x7F000000u +#define PMU_REG_HSIC_1P2_SET_RSVD1_SHIFT 24 +#define PMU_REG_HSIC_1P2_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_SET_RSVD1_SHIFT))&PMU_REG_HSIC_1P2_SET_RSVD1_MASK) +#define PMU_REG_HSIC_1P2_SET_OVERRIDE_MASK 0x80000000u +#define PMU_REG_HSIC_1P2_SET_OVERRIDE_SHIFT 31 +/* REG_HSIC_1P2_CLR Bit Fields */ +#define PMU_REG_HSIC_1P2_CLR_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_HSIC_1P2_CLR_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_HSIC_1P2_CLR_ENABLE_BO_MASK 0x2u +#define PMU_REG_HSIC_1P2_CLR_ENABLE_BO_SHIFT 1 +#define PMU_REG_HSIC_1P2_CLR_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_HSIC_1P2_CLR_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_HSIC_1P2_CLR_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_HSIC_1P2_CLR_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_HSIC_1P2_CLR_BO_OFFSET_MASK 0x70u +#define PMU_REG_HSIC_1P2_CLR_BO_OFFSET_SHIFT 4 +#define PMU_REG_HSIC_1P2_CLR_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_CLR_BO_OFFSET_SHIFT))&PMU_REG_HSIC_1P2_CLR_BO_OFFSET_MASK) +#define PMU_REG_HSIC_1P2_CLR_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_HSIC_1P2_CLR_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_HSIC_1P2_CLR_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_HSIC_1P2_CLR_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_HSIC_1P2_CLR_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_CLR_OUTPUT_TRG_SHIFT))&PMU_REG_HSIC_1P2_CLR_OUTPUT_TRG_MASK) +#define PMU_REG_HSIC_1P2_CLR_RSVD0_MASK 0xE000u +#define PMU_REG_HSIC_1P2_CLR_RSVD0_SHIFT 13 +#define PMU_REG_HSIC_1P2_CLR_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_CLR_RSVD0_SHIFT))&PMU_REG_HSIC_1P2_CLR_RSVD0_MASK) +#define PMU_REG_HSIC_1P2_CLR_BO_MASK 0x10000u +#define PMU_REG_HSIC_1P2_CLR_BO_SHIFT 16 +#define PMU_REG_HSIC_1P2_CLR_OK_MASK 0x20000u +#define PMU_REG_HSIC_1P2_CLR_OK_SHIFT 17 +#define PMU_REG_HSIC_1P2_CLR_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_HSIC_1P2_CLR_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_HSIC_1P2_CLR_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_HSIC_1P2_CLR_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_HSIC_1P2_CLR_REG_TEST_MASK 0xF00000u +#define PMU_REG_HSIC_1P2_CLR_REG_TEST_SHIFT 20 +#define PMU_REG_HSIC_1P2_CLR_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_CLR_REG_TEST_SHIFT))&PMU_REG_HSIC_1P2_CLR_REG_TEST_MASK) +#define PMU_REG_HSIC_1P2_CLR_RSVD1_MASK 0x7F000000u +#define PMU_REG_HSIC_1P2_CLR_RSVD1_SHIFT 24 +#define PMU_REG_HSIC_1P2_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_CLR_RSVD1_SHIFT))&PMU_REG_HSIC_1P2_CLR_RSVD1_MASK) +#define PMU_REG_HSIC_1P2_CLR_OVERRIDE_MASK 0x80000000u +#define PMU_REG_HSIC_1P2_CLR_OVERRIDE_SHIFT 31 +/* REG_HSIC_1P2_TOG Bit Fields */ +#define PMU_REG_HSIC_1P2_TOG_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_HSIC_1P2_TOG_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_HSIC_1P2_TOG_ENABLE_BO_MASK 0x2u +#define PMU_REG_HSIC_1P2_TOG_ENABLE_BO_SHIFT 1 +#define PMU_REG_HSIC_1P2_TOG_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_HSIC_1P2_TOG_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_HSIC_1P2_TOG_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_HSIC_1P2_TOG_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_HSIC_1P2_TOG_BO_OFFSET_MASK 0x70u +#define PMU_REG_HSIC_1P2_TOG_BO_OFFSET_SHIFT 4 +#define PMU_REG_HSIC_1P2_TOG_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_TOG_BO_OFFSET_SHIFT))&PMU_REG_HSIC_1P2_TOG_BO_OFFSET_MASK) +#define PMU_REG_HSIC_1P2_TOG_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_HSIC_1P2_TOG_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_HSIC_1P2_TOG_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_HSIC_1P2_TOG_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_HSIC_1P2_TOG_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_TOG_OUTPUT_TRG_SHIFT))&PMU_REG_HSIC_1P2_TOG_OUTPUT_TRG_MASK) +#define PMU_REG_HSIC_1P2_TOG_RSVD0_MASK 0xE000u +#define PMU_REG_HSIC_1P2_TOG_RSVD0_SHIFT 13 +#define PMU_REG_HSIC_1P2_TOG_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_TOG_RSVD0_SHIFT))&PMU_REG_HSIC_1P2_TOG_RSVD0_MASK) +#define PMU_REG_HSIC_1P2_TOG_BO_MASK 0x10000u +#define PMU_REG_HSIC_1P2_TOG_BO_SHIFT 16 +#define PMU_REG_HSIC_1P2_TOG_OK_MASK 0x20000u +#define PMU_REG_HSIC_1P2_TOG_OK_SHIFT 17 +#define PMU_REG_HSIC_1P2_TOG_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_HSIC_1P2_TOG_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_HSIC_1P2_TOG_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_HSIC_1P2_TOG_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_HSIC_1P2_TOG_REG_TEST_MASK 0xF00000u +#define PMU_REG_HSIC_1P2_TOG_REG_TEST_SHIFT 20 +#define PMU_REG_HSIC_1P2_TOG_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_TOG_REG_TEST_SHIFT))&PMU_REG_HSIC_1P2_TOG_REG_TEST_MASK) +#define PMU_REG_HSIC_1P2_TOG_RSVD1_MASK 0x7F000000u +#define PMU_REG_HSIC_1P2_TOG_RSVD1_SHIFT 24 +#define PMU_REG_HSIC_1P2_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_HSIC_1P2_TOG_RSVD1_SHIFT))&PMU_REG_HSIC_1P2_TOG_RSVD1_MASK) +#define PMU_REG_HSIC_1P2_TOG_OVERRIDE_MASK 0x80000000u +#define PMU_REG_HSIC_1P2_TOG_OVERRIDE_SHIFT 31 +/* REG_LPSR_1P0 Bit Fields */ +#define PMU_REG_LPSR_1P0_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_LPSR_1P0_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_LPSR_1P0_ENABLE_BO_MASK 0x2u +#define PMU_REG_LPSR_1P0_ENABLE_BO_SHIFT 1 +#define PMU_REG_LPSR_1P0_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_LPSR_1P0_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_LPSR_1P0_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_LPSR_1P0_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_LPSR_1P0_BO_OFFSET_MASK 0x70u +#define PMU_REG_LPSR_1P0_BO_OFFSET_SHIFT 4 +#define PMU_REG_LPSR_1P0_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_BO_OFFSET_SHIFT))&PMU_REG_LPSR_1P0_BO_OFFSET_MASK) +#define PMU_REG_LPSR_1P0_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_LPSR_1P0_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_LPSR_1P0_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_LPSR_1P0_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_LPSR_1P0_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_OUTPUT_TRG_SHIFT))&PMU_REG_LPSR_1P0_OUTPUT_TRG_MASK) +#define PMU_REG_LPSR_1P0_RSVD0_MASK 0xE000u +#define PMU_REG_LPSR_1P0_RSVD0_SHIFT 13 +#define PMU_REG_LPSR_1P0_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_RSVD0_SHIFT))&PMU_REG_LPSR_1P0_RSVD0_MASK) +#define PMU_REG_LPSR_1P0_BO_MASK 0x10000u +#define PMU_REG_LPSR_1P0_BO_SHIFT 16 +#define PMU_REG_LPSR_1P0_OK_MASK 0x20000u +#define PMU_REG_LPSR_1P0_OK_SHIFT 17 +#define PMU_REG_LPSR_1P0_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_LPSR_1P0_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_LPSR_1P0_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_LPSR_1P0_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_LPSR_1P0_REG_TEST_MASK 0xF00000u +#define PMU_REG_LPSR_1P0_REG_TEST_SHIFT 20 +#define PMU_REG_LPSR_1P0_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_REG_TEST_SHIFT))&PMU_REG_LPSR_1P0_REG_TEST_MASK) +#define PMU_REG_LPSR_1P0_RSVD1_MASK 0xFF000000u +#define PMU_REG_LPSR_1P0_RSVD1_SHIFT 24 +#define PMU_REG_LPSR_1P0_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_RSVD1_SHIFT))&PMU_REG_LPSR_1P0_RSVD1_MASK) +/* REG_LPSR_1P0_SET Bit Fields */ +#define PMU_REG_LPSR_1P0_SET_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_LPSR_1P0_SET_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_LPSR_1P0_SET_ENABLE_BO_MASK 0x2u +#define PMU_REG_LPSR_1P0_SET_ENABLE_BO_SHIFT 1 +#define PMU_REG_LPSR_1P0_SET_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_LPSR_1P0_SET_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_LPSR_1P0_SET_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_LPSR_1P0_SET_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_LPSR_1P0_SET_BO_OFFSET_MASK 0x70u +#define PMU_REG_LPSR_1P0_SET_BO_OFFSET_SHIFT 4 +#define PMU_REG_LPSR_1P0_SET_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_SET_BO_OFFSET_SHIFT))&PMU_REG_LPSR_1P0_SET_BO_OFFSET_MASK) +#define PMU_REG_LPSR_1P0_SET_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_LPSR_1P0_SET_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_LPSR_1P0_SET_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_LPSR_1P0_SET_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_LPSR_1P0_SET_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_SET_OUTPUT_TRG_SHIFT))&PMU_REG_LPSR_1P0_SET_OUTPUT_TRG_MASK) +#define PMU_REG_LPSR_1P0_SET_RSVD0_MASK 0xE000u +#define PMU_REG_LPSR_1P0_SET_RSVD0_SHIFT 13 +#define PMU_REG_LPSR_1P0_SET_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_SET_RSVD0_SHIFT))&PMU_REG_LPSR_1P0_SET_RSVD0_MASK) +#define PMU_REG_LPSR_1P0_SET_BO_MASK 0x10000u +#define PMU_REG_LPSR_1P0_SET_BO_SHIFT 16 +#define PMU_REG_LPSR_1P0_SET_OK_MASK 0x20000u +#define PMU_REG_LPSR_1P0_SET_OK_SHIFT 17 +#define PMU_REG_LPSR_1P0_SET_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_LPSR_1P0_SET_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_LPSR_1P0_SET_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_LPSR_1P0_SET_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_LPSR_1P0_SET_REG_TEST_MASK 0xF00000u +#define PMU_REG_LPSR_1P0_SET_REG_TEST_SHIFT 20 +#define PMU_REG_LPSR_1P0_SET_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_SET_REG_TEST_SHIFT))&PMU_REG_LPSR_1P0_SET_REG_TEST_MASK) +#define PMU_REG_LPSR_1P0_SET_RSVD1_MASK 0xFF000000u +#define PMU_REG_LPSR_1P0_SET_RSVD1_SHIFT 24 +#define PMU_REG_LPSR_1P0_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_SET_RSVD1_SHIFT))&PMU_REG_LPSR_1P0_SET_RSVD1_MASK) +/* REG_LPSR_1P0_CLR Bit Fields */ +#define PMU_REG_LPSR_1P0_CLR_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_LPSR_1P0_CLR_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_LPSR_1P0_CLR_ENABLE_BO_MASK 0x2u +#define PMU_REG_LPSR_1P0_CLR_ENABLE_BO_SHIFT 1 +#define PMU_REG_LPSR_1P0_CLR_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_LPSR_1P0_CLR_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_LPSR_1P0_CLR_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_LPSR_1P0_CLR_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_LPSR_1P0_CLR_BO_OFFSET_MASK 0x70u +#define PMU_REG_LPSR_1P0_CLR_BO_OFFSET_SHIFT 4 +#define PMU_REG_LPSR_1P0_CLR_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_CLR_BO_OFFSET_SHIFT))&PMU_REG_LPSR_1P0_CLR_BO_OFFSET_MASK) +#define PMU_REG_LPSR_1P0_CLR_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_LPSR_1P0_CLR_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_LPSR_1P0_CLR_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_LPSR_1P0_CLR_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_LPSR_1P0_CLR_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_CLR_OUTPUT_TRG_SHIFT))&PMU_REG_LPSR_1P0_CLR_OUTPUT_TRG_MASK) +#define PMU_REG_LPSR_1P0_CLR_RSVD0_MASK 0xE000u +#define PMU_REG_LPSR_1P0_CLR_RSVD0_SHIFT 13 +#define PMU_REG_LPSR_1P0_CLR_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_CLR_RSVD0_SHIFT))&PMU_REG_LPSR_1P0_CLR_RSVD0_MASK) +#define PMU_REG_LPSR_1P0_CLR_BO_MASK 0x10000u +#define PMU_REG_LPSR_1P0_CLR_BO_SHIFT 16 +#define PMU_REG_LPSR_1P0_CLR_OK_MASK 0x20000u +#define PMU_REG_LPSR_1P0_CLR_OK_SHIFT 17 +#define PMU_REG_LPSR_1P0_CLR_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_LPSR_1P0_CLR_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_LPSR_1P0_CLR_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_LPSR_1P0_CLR_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_LPSR_1P0_CLR_REG_TEST_MASK 0xF00000u +#define PMU_REG_LPSR_1P0_CLR_REG_TEST_SHIFT 20 +#define PMU_REG_LPSR_1P0_CLR_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_CLR_REG_TEST_SHIFT))&PMU_REG_LPSR_1P0_CLR_REG_TEST_MASK) +#define PMU_REG_LPSR_1P0_CLR_RSVD1_MASK 0xFF000000u +#define PMU_REG_LPSR_1P0_CLR_RSVD1_SHIFT 24 +#define PMU_REG_LPSR_1P0_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_CLR_RSVD1_SHIFT))&PMU_REG_LPSR_1P0_CLR_RSVD1_MASK) +/* REG_LPSR_1P0_TOG Bit Fields */ +#define PMU_REG_LPSR_1P0_TOG_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_LPSR_1P0_TOG_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_LPSR_1P0_TOG_ENABLE_BO_MASK 0x2u +#define PMU_REG_LPSR_1P0_TOG_ENABLE_BO_SHIFT 1 +#define PMU_REG_LPSR_1P0_TOG_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_LPSR_1P0_TOG_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_LPSR_1P0_TOG_ENABLE_PULLDOWN_MASK 0x8u +#define PMU_REG_LPSR_1P0_TOG_ENABLE_PULLDOWN_SHIFT 3 +#define PMU_REG_LPSR_1P0_TOG_BO_OFFSET_MASK 0x70u +#define PMU_REG_LPSR_1P0_TOG_BO_OFFSET_SHIFT 4 +#define PMU_REG_LPSR_1P0_TOG_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_TOG_BO_OFFSET_SHIFT))&PMU_REG_LPSR_1P0_TOG_BO_OFFSET_MASK) +#define PMU_REG_LPSR_1P0_TOG_ENABLE_PWRUPLOAD_MASK 0x80u +#define PMU_REG_LPSR_1P0_TOG_ENABLE_PWRUPLOAD_SHIFT 7 +#define PMU_REG_LPSR_1P0_TOG_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_LPSR_1P0_TOG_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_LPSR_1P0_TOG_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_TOG_OUTPUT_TRG_SHIFT))&PMU_REG_LPSR_1P0_TOG_OUTPUT_TRG_MASK) +#define PMU_REG_LPSR_1P0_TOG_RSVD0_MASK 0xE000u +#define PMU_REG_LPSR_1P0_TOG_RSVD0_SHIFT 13 +#define PMU_REG_LPSR_1P0_TOG_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_TOG_RSVD0_SHIFT))&PMU_REG_LPSR_1P0_TOG_RSVD0_MASK) +#define PMU_REG_LPSR_1P0_TOG_BO_MASK 0x10000u +#define PMU_REG_LPSR_1P0_TOG_BO_SHIFT 16 +#define PMU_REG_LPSR_1P0_TOG_OK_MASK 0x20000u +#define PMU_REG_LPSR_1P0_TOG_OK_SHIFT 17 +#define PMU_REG_LPSR_1P0_TOG_ENABLE_WEAK_LINREG_MASK 0x40000u +#define PMU_REG_LPSR_1P0_TOG_ENABLE_WEAK_LINREG_SHIFT 18 +#define PMU_REG_LPSR_1P0_TOG_SELREF_WEAK_LINREG_MASK 0x80000u +#define PMU_REG_LPSR_1P0_TOG_SELREF_WEAK_LINREG_SHIFT 19 +#define PMU_REG_LPSR_1P0_TOG_REG_TEST_MASK 0xF00000u +#define PMU_REG_LPSR_1P0_TOG_REG_TEST_SHIFT 20 +#define PMU_REG_LPSR_1P0_TOG_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_TOG_REG_TEST_SHIFT))&PMU_REG_LPSR_1P0_TOG_REG_TEST_MASK) +#define PMU_REG_LPSR_1P0_TOG_RSVD1_MASK 0xFF000000u +#define PMU_REG_LPSR_1P0_TOG_RSVD1_SHIFT 24 +#define PMU_REG_LPSR_1P0_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_LPSR_1P0_TOG_RSVD1_SHIFT))&PMU_REG_LPSR_1P0_TOG_RSVD1_MASK) +/* REG_3P0 Bit Fields */ +#define PMU_REG_3P0_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_3P0_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_3P0_ENABLE_BO_MASK 0x2u +#define PMU_REG_3P0_ENABLE_BO_SHIFT 1 +#define PMU_REG_3P0_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_3P0_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_3P0_RSVD0_MASK 0x8u +#define PMU_REG_3P0_RSVD0_SHIFT 3 +#define PMU_REG_3P0_BO_OFFSET_MASK 0x70u +#define PMU_REG_3P0_BO_OFFSET_SHIFT 4 +#define PMU_REG_3P0_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_BO_OFFSET_SHIFT))&PMU_REG_3P0_BO_OFFSET_MASK) +#define PMU_REG_3P0_VBUS_SEL_MASK 0x80u +#define PMU_REG_3P0_VBUS_SEL_SHIFT 7 +#define PMU_REG_3P0_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_3P0_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_3P0_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_OUTPUT_TRG_SHIFT))&PMU_REG_3P0_OUTPUT_TRG_MASK) +#define PMU_REG_3P0_RSVD1_MASK 0xE000u +#define PMU_REG_3P0_RSVD1_SHIFT 13 +#define PMU_REG_3P0_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_RSVD1_SHIFT))&PMU_REG_3P0_RSVD1_MASK) +#define PMU_REG_3P0_BO_VDD3P0_MASK 0x10000u +#define PMU_REG_3P0_BO_VDD3P0_SHIFT 16 +#define PMU_REG_3P0_OK_VDD3P0_MASK 0x20000u +#define PMU_REG_3P0_OK_VDD3P0_SHIFT 17 +#define PMU_REG_3P0_REG_TEST_MASK 0x3C0000u +#define PMU_REG_3P0_REG_TEST_SHIFT 18 +#define PMU_REG_3P0_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_REG_TEST_SHIFT))&PMU_REG_3P0_REG_TEST_MASK) +#define PMU_REG_3P0_RSVD2_MASK 0xFFC00000u +#define PMU_REG_3P0_RSVD2_SHIFT 22 +#define PMU_REG_3P0_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_RSVD2_SHIFT))&PMU_REG_3P0_RSVD2_MASK) +/* REG_3P0_SET Bit Fields */ +#define PMU_REG_3P0_SET_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_3P0_SET_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_3P0_SET_ENABLE_BO_MASK 0x2u +#define PMU_REG_3P0_SET_ENABLE_BO_SHIFT 1 +#define PMU_REG_3P0_SET_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_3P0_SET_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_3P0_SET_RSVD0_MASK 0x8u +#define PMU_REG_3P0_SET_RSVD0_SHIFT 3 +#define PMU_REG_3P0_SET_BO_OFFSET_MASK 0x70u +#define PMU_REG_3P0_SET_BO_OFFSET_SHIFT 4 +#define PMU_REG_3P0_SET_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_SET_BO_OFFSET_SHIFT))&PMU_REG_3P0_SET_BO_OFFSET_MASK) +#define PMU_REG_3P0_SET_VBUS_SEL_MASK 0x80u +#define PMU_REG_3P0_SET_VBUS_SEL_SHIFT 7 +#define PMU_REG_3P0_SET_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_3P0_SET_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_3P0_SET_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_SET_OUTPUT_TRG_SHIFT))&PMU_REG_3P0_SET_OUTPUT_TRG_MASK) +#define PMU_REG_3P0_SET_RSVD1_MASK 0xE000u +#define PMU_REG_3P0_SET_RSVD1_SHIFT 13 +#define PMU_REG_3P0_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_SET_RSVD1_SHIFT))&PMU_REG_3P0_SET_RSVD1_MASK) +#define PMU_REG_3P0_SET_BO_VDD3P0_MASK 0x10000u +#define PMU_REG_3P0_SET_BO_VDD3P0_SHIFT 16 +#define PMU_REG_3P0_SET_OK_VDD3P0_MASK 0x20000u +#define PMU_REG_3P0_SET_OK_VDD3P0_SHIFT 17 +#define PMU_REG_3P0_SET_REG_TEST_MASK 0x3C0000u +#define PMU_REG_3P0_SET_REG_TEST_SHIFT 18 +#define PMU_REG_3P0_SET_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_SET_REG_TEST_SHIFT))&PMU_REG_3P0_SET_REG_TEST_MASK) +#define PMU_REG_3P0_SET_RSVD2_MASK 0xFFC00000u +#define PMU_REG_3P0_SET_RSVD2_SHIFT 22 +#define PMU_REG_3P0_SET_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_SET_RSVD2_SHIFT))&PMU_REG_3P0_SET_RSVD2_MASK) +/* REG_3P0_CLR Bit Fields */ +#define PMU_REG_3P0_CLR_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_3P0_CLR_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_3P0_CLR_ENABLE_BO_MASK 0x2u +#define PMU_REG_3P0_CLR_ENABLE_BO_SHIFT 1 +#define PMU_REG_3P0_CLR_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_3P0_CLR_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_3P0_CLR_RSVD0_MASK 0x8u +#define PMU_REG_3P0_CLR_RSVD0_SHIFT 3 +#define PMU_REG_3P0_CLR_BO_OFFSET_MASK 0x70u +#define PMU_REG_3P0_CLR_BO_OFFSET_SHIFT 4 +#define PMU_REG_3P0_CLR_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_CLR_BO_OFFSET_SHIFT))&PMU_REG_3P0_CLR_BO_OFFSET_MASK) +#define PMU_REG_3P0_CLR_VBUS_SEL_MASK 0x80u +#define PMU_REG_3P0_CLR_VBUS_SEL_SHIFT 7 +#define PMU_REG_3P0_CLR_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_3P0_CLR_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_3P0_CLR_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_CLR_OUTPUT_TRG_SHIFT))&PMU_REG_3P0_CLR_OUTPUT_TRG_MASK) +#define PMU_REG_3P0_CLR_RSVD1_MASK 0xE000u +#define PMU_REG_3P0_CLR_RSVD1_SHIFT 13 +#define PMU_REG_3P0_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_CLR_RSVD1_SHIFT))&PMU_REG_3P0_CLR_RSVD1_MASK) +#define PMU_REG_3P0_CLR_BO_VDD3P0_MASK 0x10000u +#define PMU_REG_3P0_CLR_BO_VDD3P0_SHIFT 16 +#define PMU_REG_3P0_CLR_OK_VDD3P0_MASK 0x20000u +#define PMU_REG_3P0_CLR_OK_VDD3P0_SHIFT 17 +#define PMU_REG_3P0_CLR_REG_TEST_MASK 0x3C0000u +#define PMU_REG_3P0_CLR_REG_TEST_SHIFT 18 +#define PMU_REG_3P0_CLR_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_CLR_REG_TEST_SHIFT))&PMU_REG_3P0_CLR_REG_TEST_MASK) +#define PMU_REG_3P0_CLR_RSVD2_MASK 0xFFC00000u +#define PMU_REG_3P0_CLR_RSVD2_SHIFT 22 +#define PMU_REG_3P0_CLR_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_CLR_RSVD2_SHIFT))&PMU_REG_3P0_CLR_RSVD2_MASK) +/* REG_3P0_TOG Bit Fields */ +#define PMU_REG_3P0_TOG_ENABLE_LINREG_MASK 0x1u +#define PMU_REG_3P0_TOG_ENABLE_LINREG_SHIFT 0 +#define PMU_REG_3P0_TOG_ENABLE_BO_MASK 0x2u +#define PMU_REG_3P0_TOG_ENABLE_BO_SHIFT 1 +#define PMU_REG_3P0_TOG_ENABLE_ILIMIT_MASK 0x4u +#define PMU_REG_3P0_TOG_ENABLE_ILIMIT_SHIFT 2 +#define PMU_REG_3P0_TOG_RSVD0_MASK 0x8u +#define PMU_REG_3P0_TOG_RSVD0_SHIFT 3 +#define PMU_REG_3P0_TOG_BO_OFFSET_MASK 0x70u +#define PMU_REG_3P0_TOG_BO_OFFSET_SHIFT 4 +#define PMU_REG_3P0_TOG_BO_OFFSET(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_TOG_BO_OFFSET_SHIFT))&PMU_REG_3P0_TOG_BO_OFFSET_MASK) +#define PMU_REG_3P0_TOG_VBUS_SEL_MASK 0x80u +#define PMU_REG_3P0_TOG_VBUS_SEL_SHIFT 7 +#define PMU_REG_3P0_TOG_OUTPUT_TRG_MASK 0x1F00u +#define PMU_REG_3P0_TOG_OUTPUT_TRG_SHIFT 8 +#define PMU_REG_3P0_TOG_OUTPUT_TRG(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_TOG_OUTPUT_TRG_SHIFT))&PMU_REG_3P0_TOG_OUTPUT_TRG_MASK) +#define PMU_REG_3P0_TOG_RSVD1_MASK 0xE000u +#define PMU_REG_3P0_TOG_RSVD1_SHIFT 13 +#define PMU_REG_3P0_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_TOG_RSVD1_SHIFT))&PMU_REG_3P0_TOG_RSVD1_MASK) +#define PMU_REG_3P0_TOG_BO_VDD3P0_MASK 0x10000u +#define PMU_REG_3P0_TOG_BO_VDD3P0_SHIFT 16 +#define PMU_REG_3P0_TOG_OK_VDD3P0_MASK 0x20000u +#define PMU_REG_3P0_TOG_OK_VDD3P0_SHIFT 17 +#define PMU_REG_3P0_TOG_REG_TEST_MASK 0x3C0000u +#define PMU_REG_3P0_TOG_REG_TEST_SHIFT 18 +#define PMU_REG_3P0_TOG_REG_TEST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_TOG_REG_TEST_SHIFT))&PMU_REG_3P0_TOG_REG_TEST_MASK) +#define PMU_REG_3P0_TOG_RSVD2_MASK 0xFFC00000u +#define PMU_REG_3P0_TOG_RSVD2_SHIFT 22 +#define PMU_REG_3P0_TOG_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<PMU_REG_3P0_TOG_RSVD2_SHIFT))&PMU_REG_3P0_TOG_RSVD2_MASK) +/* REF Bit Fields */ +#define PMU_REF_REFTOP_PWD_MASK 0x1u +#define PMU_REF_REFTOP_PWD_SHIFT 0 +#define PMU_REF_REFTOP_PWDVBGUP_MASK 0x2u +#define PMU_REF_REFTOP_PWDVBGUP_SHIFT 1 +#define PMU_REF_REFTOP_LOWPOWER_MASK 0x4u +#define PMU_REF_REFTOP_LOWPOWER_SHIFT 2 +#define PMU_REF_REFTOP_SELFBIASOFF_MASK 0x8u +#define PMU_REF_REFTOP_SELFBIASOFF_SHIFT 3 +#define PMU_REF_REFTOP_VBGADJ_MASK 0x70u +#define PMU_REF_REFTOP_VBGADJ_SHIFT 4 +#define PMU_REF_REFTOP_VBGADJ(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_REFTOP_VBGADJ_SHIFT))&PMU_REF_REFTOP_VBGADJ_MASK) +#define PMU_REF_REFTOP_VBGUP_MASK 0x80u +#define PMU_REF_REFTOP_VBGUP_SHIFT 7 +#define PMU_REF_REFTOP_BIAS_TST_MASK 0x300u +#define PMU_REF_REFTOP_BIAS_TST_SHIFT 8 +#define PMU_REF_REFTOP_BIAS_TST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_REFTOP_BIAS_TST_SHIFT))&PMU_REF_REFTOP_BIAS_TST_MASK) +#define PMU_REF_LPBG_SEL_MASK 0x400u +#define PMU_REF_LPBG_SEL_SHIFT 10 +#define PMU_REF_LPBG_TEST_MASK 0x800u +#define PMU_REF_LPBG_TEST_SHIFT 11 +#define PMU_REF_REFTOP_IBIAS_OFF_MASK 0x1000u +#define PMU_REF_REFTOP_IBIAS_OFF_SHIFT 12 +#define PMU_REF_REFTOP_LINREGREF_EN_MASK 0x2000u +#define PMU_REF_REFTOP_LINREGREF_EN_SHIFT 13 +#define PMU_REF_RSVD1_MASK 0xFFFFC000u +#define PMU_REF_RSVD1_SHIFT 14 +#define PMU_REF_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_RSVD1_SHIFT))&PMU_REF_RSVD1_MASK) +/* REF_SET Bit Fields */ +#define PMU_REF_SET_REFTOP_PWD_MASK 0x1u +#define PMU_REF_SET_REFTOP_PWD_SHIFT 0 +#define PMU_REF_SET_REFTOP_PWDVBGUP_MASK 0x2u +#define PMU_REF_SET_REFTOP_PWDVBGUP_SHIFT 1 +#define PMU_REF_SET_REFTOP_LOWPOWER_MASK 0x4u +#define PMU_REF_SET_REFTOP_LOWPOWER_SHIFT 2 +#define PMU_REF_SET_REFTOP_SELFBIASOFF_MASK 0x8u +#define PMU_REF_SET_REFTOP_SELFBIASOFF_SHIFT 3 +#define PMU_REF_SET_REFTOP_VBGADJ_MASK 0x70u +#define PMU_REF_SET_REFTOP_VBGADJ_SHIFT 4 +#define PMU_REF_SET_REFTOP_VBGADJ(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_SET_REFTOP_VBGADJ_SHIFT))&PMU_REF_SET_REFTOP_VBGADJ_MASK) +#define PMU_REF_SET_REFTOP_VBGUP_MASK 0x80u +#define PMU_REF_SET_REFTOP_VBGUP_SHIFT 7 +#define PMU_REF_SET_REFTOP_BIAS_TST_MASK 0x300u +#define PMU_REF_SET_REFTOP_BIAS_TST_SHIFT 8 +#define PMU_REF_SET_REFTOP_BIAS_TST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_SET_REFTOP_BIAS_TST_SHIFT))&PMU_REF_SET_REFTOP_BIAS_TST_MASK) +#define PMU_REF_SET_LPBG_SEL_MASK 0x400u +#define PMU_REF_SET_LPBG_SEL_SHIFT 10 +#define PMU_REF_SET_LPBG_TEST_MASK 0x800u +#define PMU_REF_SET_LPBG_TEST_SHIFT 11 +#define PMU_REF_SET_REFTOP_IBIAS_OFF_MASK 0x1000u +#define PMU_REF_SET_REFTOP_IBIAS_OFF_SHIFT 12 +#define PMU_REF_SET_REFTOP_LINREGREF_EN_MASK 0x2000u +#define PMU_REF_SET_REFTOP_LINREGREF_EN_SHIFT 13 +#define PMU_REF_SET_RSVD1_MASK 0xFFFFC000u +#define PMU_REF_SET_RSVD1_SHIFT 14 +#define PMU_REF_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_SET_RSVD1_SHIFT))&PMU_REF_SET_RSVD1_MASK) +/* REF_CLR Bit Fields */ +#define PMU_REF_CLR_REFTOP_PWD_MASK 0x1u +#define PMU_REF_CLR_REFTOP_PWD_SHIFT 0 +#define PMU_REF_CLR_REFTOP_PWDVBGUP_MASK 0x2u +#define PMU_REF_CLR_REFTOP_PWDVBGUP_SHIFT 1 +#define PMU_REF_CLR_REFTOP_LOWPOWER_MASK 0x4u +#define PMU_REF_CLR_REFTOP_LOWPOWER_SHIFT 2 +#define PMU_REF_CLR_REFTOP_SELFBIASOFF_MASK 0x8u +#define PMU_REF_CLR_REFTOP_SELFBIASOFF_SHIFT 3 +#define PMU_REF_CLR_REFTOP_VBGADJ_MASK 0x70u +#define PMU_REF_CLR_REFTOP_VBGADJ_SHIFT 4 +#define PMU_REF_CLR_REFTOP_VBGADJ(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_CLR_REFTOP_VBGADJ_SHIFT))&PMU_REF_CLR_REFTOP_VBGADJ_MASK) +#define PMU_REF_CLR_REFTOP_VBGUP_MASK 0x80u +#define PMU_REF_CLR_REFTOP_VBGUP_SHIFT 7 +#define PMU_REF_CLR_REFTOP_BIAS_TST_MASK 0x300u +#define PMU_REF_CLR_REFTOP_BIAS_TST_SHIFT 8 +#define PMU_REF_CLR_REFTOP_BIAS_TST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_CLR_REFTOP_BIAS_TST_SHIFT))&PMU_REF_CLR_REFTOP_BIAS_TST_MASK) +#define PMU_REF_CLR_LPBG_SEL_MASK 0x400u +#define PMU_REF_CLR_LPBG_SEL_SHIFT 10 +#define PMU_REF_CLR_LPBG_TEST_MASK 0x800u +#define PMU_REF_CLR_LPBG_TEST_SHIFT 11 +#define PMU_REF_CLR_REFTOP_IBIAS_OFF_MASK 0x1000u +#define PMU_REF_CLR_REFTOP_IBIAS_OFF_SHIFT 12 +#define PMU_REF_CLR_REFTOP_LINREGREF_EN_MASK 0x2000u +#define PMU_REF_CLR_REFTOP_LINREGREF_EN_SHIFT 13 +#define PMU_REF_CLR_RSVD1_MASK 0xFFFFC000u +#define PMU_REF_CLR_RSVD1_SHIFT 14 +#define PMU_REF_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_CLR_RSVD1_SHIFT))&PMU_REF_CLR_RSVD1_MASK) +/* REF_TOG Bit Fields */ +#define PMU_REF_TOG_REFTOP_PWD_MASK 0x1u +#define PMU_REF_TOG_REFTOP_PWD_SHIFT 0 +#define PMU_REF_TOG_REFTOP_PWDVBGUP_MASK 0x2u +#define PMU_REF_TOG_REFTOP_PWDVBGUP_SHIFT 1 +#define PMU_REF_TOG_REFTOP_LOWPOWER_MASK 0x4u +#define PMU_REF_TOG_REFTOP_LOWPOWER_SHIFT 2 +#define PMU_REF_TOG_REFTOP_SELFBIASOFF_MASK 0x8u +#define PMU_REF_TOG_REFTOP_SELFBIASOFF_SHIFT 3 +#define PMU_REF_TOG_REFTOP_VBGADJ_MASK 0x70u +#define PMU_REF_TOG_REFTOP_VBGADJ_SHIFT 4 +#define PMU_REF_TOG_REFTOP_VBGADJ(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_TOG_REFTOP_VBGADJ_SHIFT))&PMU_REF_TOG_REFTOP_VBGADJ_MASK) +#define PMU_REF_TOG_REFTOP_VBGUP_MASK 0x80u +#define PMU_REF_TOG_REFTOP_VBGUP_SHIFT 7 +#define PMU_REF_TOG_REFTOP_BIAS_TST_MASK 0x300u +#define PMU_REF_TOG_REFTOP_BIAS_TST_SHIFT 8 +#define PMU_REF_TOG_REFTOP_BIAS_TST(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_TOG_REFTOP_BIAS_TST_SHIFT))&PMU_REF_TOG_REFTOP_BIAS_TST_MASK) +#define PMU_REF_TOG_LPBG_SEL_MASK 0x400u +#define PMU_REF_TOG_LPBG_SEL_SHIFT 10 +#define PMU_REF_TOG_LPBG_TEST_MASK 0x800u +#define PMU_REF_TOG_LPBG_TEST_SHIFT 11 +#define PMU_REF_TOG_REFTOP_IBIAS_OFF_MASK 0x1000u +#define PMU_REF_TOG_REFTOP_IBIAS_OFF_SHIFT 12 +#define PMU_REF_TOG_REFTOP_LINREGREF_EN_MASK 0x2000u +#define PMU_REF_TOG_REFTOP_LINREGREF_EN_SHIFT 13 +#define PMU_REF_TOG_RSVD1_MASK 0xFFFFC000u +#define PMU_REF_TOG_RSVD1_SHIFT 14 +#define PMU_REF_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<PMU_REF_TOG_RSVD1_SHIFT))&PMU_REF_TOG_RSVD1_MASK) +/* LOWPWR_CTRL Bit Fields */ +#define PMU_LOWPWR_CTRL_STOP_MODE_CONFIG_MASK 0x3u +#define PMU_LOWPWR_CTRL_STOP_MODE_CONFIG_SHIFT 0 +#define PMU_LOWPWR_CTRL_STOP_MODE_CONFIG(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_STOP_MODE_CONFIG_SHIFT))&PMU_LOWPWR_CTRL_STOP_MODE_CONFIG_MASK) +#define PMU_LOWPWR_CTRL_RSVD0_MASK 0xFCu +#define PMU_LOWPWR_CTRL_RSVD0_SHIFT 2 +#define PMU_LOWPWR_CTRL_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_RSVD0_SHIFT))&PMU_LOWPWR_CTRL_RSVD0_MASK) +#define PMU_LOWPWR_CTRL_L1_PWRGATE_MASK 0x100u +#define PMU_LOWPWR_CTRL_L1_PWRGATE_SHIFT 8 +#define PMU_LOWPWR_CTRL_L2_PWRGATE_MASK 0x200u +#define PMU_LOWPWR_CTRL_L2_PWRGATE_SHIFT 9 +#define PMU_LOWPWR_CTRL_CPU_PWRGATE_MASK 0x400u +#define PMU_LOWPWR_CTRL_CPU_PWRGATE_SHIFT 10 +#define PMU_LOWPWR_CTRL_DISPLAY_PWRGATE_MASK 0x800u +#define PMU_LOWPWR_CTRL_DISPLAY_PWRGATE_SHIFT 11 +#define PMU_LOWPWR_CTRL_MIX_PWRGATE_MASK 0x1000u +#define PMU_LOWPWR_CTRL_MIX_PWRGATE_SHIFT 12 +#define PMU_LOWPWR_CTRL_GPU_PWRGATE_MASK 0x2000u +#define PMU_LOWPWR_CTRL_GPU_PWRGATE_SHIFT 13 +#define PMU_LOWPWR_CTRL_CONTROL0_MASK 0xFFC000u +#define PMU_LOWPWR_CTRL_CONTROL0_SHIFT 14 +#define PMU_LOWPWR_CTRL_CONTROL0(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CONTROL0_SHIFT))&PMU_LOWPWR_CTRL_CONTROL0_MASK) +#define PMU_LOWPWR_CTRL_CONTROL1_MASK 0xFF000000u +#define PMU_LOWPWR_CTRL_CONTROL1_SHIFT 24 +#define PMU_LOWPWR_CTRL_CONTROL1(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CONTROL1_SHIFT))&PMU_LOWPWR_CTRL_CONTROL1_MASK) +/* LOWPWR_CTRL_SET Bit Fields */ +#define PMU_LOWPWR_CTRL_SET_STOP_MODE_CONFIG_MASK 0x3u +#define PMU_LOWPWR_CTRL_SET_STOP_MODE_CONFIG_SHIFT 0 +#define PMU_LOWPWR_CTRL_SET_STOP_MODE_CONFIG(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_SET_STOP_MODE_CONFIG_SHIFT))&PMU_LOWPWR_CTRL_SET_STOP_MODE_CONFIG_MASK) +#define PMU_LOWPWR_CTRL_SET_RSVD0_MASK 0xFCu +#define PMU_LOWPWR_CTRL_SET_RSVD0_SHIFT 2 +#define PMU_LOWPWR_CTRL_SET_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_SET_RSVD0_SHIFT))&PMU_LOWPWR_CTRL_SET_RSVD0_MASK) +#define PMU_LOWPWR_CTRL_SET_L1_PWRGATE_MASK 0x100u +#define PMU_LOWPWR_CTRL_SET_L1_PWRGATE_SHIFT 8 +#define PMU_LOWPWR_CTRL_SET_L2_PWRGATE_MASK 0x200u +#define PMU_LOWPWR_CTRL_SET_L2_PWRGATE_SHIFT 9 +#define PMU_LOWPWR_CTRL_SET_CPU_PWRGATE_MASK 0x400u +#define PMU_LOWPWR_CTRL_SET_CPU_PWRGATE_SHIFT 10 +#define PMU_LOWPWR_CTRL_SET_DISPLAY_PWRGATE_MASK 0x800u +#define PMU_LOWPWR_CTRL_SET_DISPLAY_PWRGATE_SHIFT 11 +#define PMU_LOWPWR_CTRL_SET_MIX_PWRGATE_MASK 0x1000u +#define PMU_LOWPWR_CTRL_SET_MIX_PWRGATE_SHIFT 12 +#define PMU_LOWPWR_CTRL_SET_GPU_PWRGATE_MASK 0x2000u +#define PMU_LOWPWR_CTRL_SET_GPU_PWRGATE_SHIFT 13 +#define PMU_LOWPWR_CTRL_SET_CONTROL0_MASK 0xFFC000u +#define PMU_LOWPWR_CTRL_SET_CONTROL0_SHIFT 14 +#define PMU_LOWPWR_CTRL_SET_CONTROL0(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_SET_CONTROL0_SHIFT))&PMU_LOWPWR_CTRL_SET_CONTROL0_MASK) +#define PMU_LOWPWR_CTRL_SET_CONTROL1_MASK 0xFF000000u +#define PMU_LOWPWR_CTRL_SET_CONTROL1_SHIFT 24 +#define PMU_LOWPWR_CTRL_SET_CONTROL1(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_SET_CONTROL1_SHIFT))&PMU_LOWPWR_CTRL_SET_CONTROL1_MASK) +/* LOWPWR_CTRL_CLR Bit Fields */ +#define PMU_LOWPWR_CTRL_CLR_STOP_MODE_CONFIG_MASK 0x3u +#define PMU_LOWPWR_CTRL_CLR_STOP_MODE_CONFIG_SHIFT 0 +#define PMU_LOWPWR_CTRL_CLR_STOP_MODE_CONFIG(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CLR_STOP_MODE_CONFIG_SHIFT))&PMU_LOWPWR_CTRL_CLR_STOP_MODE_CONFIG_MASK) +#define PMU_LOWPWR_CTRL_CLR_RSVD0_MASK 0xFCu +#define PMU_LOWPWR_CTRL_CLR_RSVD0_SHIFT 2 +#define PMU_LOWPWR_CTRL_CLR_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CLR_RSVD0_SHIFT))&PMU_LOWPWR_CTRL_CLR_RSVD0_MASK) +#define PMU_LOWPWR_CTRL_CLR_L1_PWRGATE_MASK 0x100u +#define PMU_LOWPWR_CTRL_CLR_L1_PWRGATE_SHIFT 8 +#define PMU_LOWPWR_CTRL_CLR_L2_PWRGATE_MASK 0x200u +#define PMU_LOWPWR_CTRL_CLR_L2_PWRGATE_SHIFT 9 +#define PMU_LOWPWR_CTRL_CLR_CPU_PWRGATE_MASK 0x400u +#define PMU_LOWPWR_CTRL_CLR_CPU_PWRGATE_SHIFT 10 +#define PMU_LOWPWR_CTRL_CLR_DISPLAY_PWRGATE_MASK 0x800u +#define PMU_LOWPWR_CTRL_CLR_DISPLAY_PWRGATE_SHIFT 11 +#define PMU_LOWPWR_CTRL_CLR_MIX_PWRGATE_MASK 0x1000u +#define PMU_LOWPWR_CTRL_CLR_MIX_PWRGATE_SHIFT 12 +#define PMU_LOWPWR_CTRL_CLR_GPU_PWRGATE_MASK 0x2000u +#define PMU_LOWPWR_CTRL_CLR_GPU_PWRGATE_SHIFT 13 +#define PMU_LOWPWR_CTRL_CLR_CONTROL0_MASK 0xFFC000u +#define PMU_LOWPWR_CTRL_CLR_CONTROL0_SHIFT 14 +#define PMU_LOWPWR_CTRL_CLR_CONTROL0(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CLR_CONTROL0_SHIFT))&PMU_LOWPWR_CTRL_CLR_CONTROL0_MASK) +#define PMU_LOWPWR_CTRL_CLR_CONTROL1_MASK 0xFF000000u +#define PMU_LOWPWR_CTRL_CLR_CONTROL1_SHIFT 24 +#define PMU_LOWPWR_CTRL_CLR_CONTROL1(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_CLR_CONTROL1_SHIFT))&PMU_LOWPWR_CTRL_CLR_CONTROL1_MASK) +/* LOWPWR_CTRL_TOG Bit Fields */ +#define PMU_LOWPWR_CTRL_TOG_STOP_MODE_CONFIG_MASK 0x3u +#define PMU_LOWPWR_CTRL_TOG_STOP_MODE_CONFIG_SHIFT 0 +#define PMU_LOWPWR_CTRL_TOG_STOP_MODE_CONFIG(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_TOG_STOP_MODE_CONFIG_SHIFT))&PMU_LOWPWR_CTRL_TOG_STOP_MODE_CONFIG_MASK) +#define PMU_LOWPWR_CTRL_TOG_RSVD0_MASK 0xFCu +#define PMU_LOWPWR_CTRL_TOG_RSVD0_SHIFT 2 +#define PMU_LOWPWR_CTRL_TOG_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_TOG_RSVD0_SHIFT))&PMU_LOWPWR_CTRL_TOG_RSVD0_MASK) +#define PMU_LOWPWR_CTRL_TOG_L1_PWRGATE_MASK 0x100u +#define PMU_LOWPWR_CTRL_TOG_L1_PWRGATE_SHIFT 8 +#define PMU_LOWPWR_CTRL_TOG_L2_PWRGATE_MASK 0x200u +#define PMU_LOWPWR_CTRL_TOG_L2_PWRGATE_SHIFT 9 +#define PMU_LOWPWR_CTRL_TOG_CPU_PWRGATE_MASK 0x400u +#define PMU_LOWPWR_CTRL_TOG_CPU_PWRGATE_SHIFT 10 +#define PMU_LOWPWR_CTRL_TOG_DISPLAY_PWRGATE_MASK 0x800u +#define PMU_LOWPWR_CTRL_TOG_DISPLAY_PWRGATE_SHIFT 11 +#define PMU_LOWPWR_CTRL_TOG_MIX_PWRGATE_MASK 0x1000u +#define PMU_LOWPWR_CTRL_TOG_MIX_PWRGATE_SHIFT 12 +#define PMU_LOWPWR_CTRL_TOG_GPU_PWRGATE_MASK 0x2000u +#define PMU_LOWPWR_CTRL_TOG_GPU_PWRGATE_SHIFT 13 +#define PMU_LOWPWR_CTRL_TOG_CONTROL0_MASK 0xFFC000u +#define PMU_LOWPWR_CTRL_TOG_CONTROL0_SHIFT 14 +#define PMU_LOWPWR_CTRL_TOG_CONTROL0(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_TOG_CONTROL0_SHIFT))&PMU_LOWPWR_CTRL_TOG_CONTROL0_MASK) +#define PMU_LOWPWR_CTRL_TOG_CONTROL1_MASK 0xFF000000u +#define PMU_LOWPWR_CTRL_TOG_CONTROL1_SHIFT 24 +#define PMU_LOWPWR_CTRL_TOG_CONTROL1(x) (((uint32_t)(((uint32_t)(x))<<PMU_LOWPWR_CTRL_TOG_CONTROL1_SHIFT))&PMU_LOWPWR_CTRL_TOG_CONTROL1_MASK) + + +/* HW_ANADIG_TEMPSENSE0 Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE0_LOW_ALARM_VALUE_MASK 0x1FFu +#define TEMPMON_HW_ANADIG_TEMPSENSE0_LOW_ALARM_VALUE_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_LOW_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_LOW_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_LOW_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_HIGH_ALARM_VALUE_MASK 0x3FE00u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_HIGH_ALARM_VALUE_SHIFT 9 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_HIGH_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_HIGH_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_HIGH_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_PANIC_ALARM_VALUE_MASK 0x7FC0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_PANIC_ALARM_VALUE_SHIFT 18 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_PANIC_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_PANIC_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_PANIC_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_RSVD1_MASK 0xF8000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_RSVD1_SHIFT 27 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_RSVD1_MASK) +/* HW_ANADIG_TEMPSENSE0_SET Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_LOW_ALARM_VALUE_MASK 0x1FFu +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_LOW_ALARM_VALUE_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_LOW_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_SET_LOW_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_SET_LOW_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_HIGH_ALARM_VALUE_MASK 0x3FE00u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_HIGH_ALARM_VALUE_SHIFT 9 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_HIGH_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_SET_HIGH_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_SET_HIGH_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_PANIC_ALARM_VALUE_MASK 0x7FC0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_PANIC_ALARM_VALUE_SHIFT 18 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_PANIC_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_SET_PANIC_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_SET_PANIC_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_RSVD1_MASK 0xF8000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_RSVD1_SHIFT 27 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_SET_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_SET_RSVD1_MASK) +/* HW_ANADIG_TEMPSENSE0_CLR Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_LOW_ALARM_VALUE_MASK 0x1FFu +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_LOW_ALARM_VALUE_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_LOW_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_LOW_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_LOW_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_HIGH_ALARM_VALUE_MASK 0x3FE00u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_HIGH_ALARM_VALUE_SHIFT 9 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_HIGH_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_HIGH_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_HIGH_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_PANIC_ALARM_VALUE_MASK 0x7FC0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_PANIC_ALARM_VALUE_SHIFT 18 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_PANIC_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_PANIC_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_PANIC_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_RSVD1_MASK 0xF8000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_RSVD1_SHIFT 27 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_CLR_RSVD1_MASK) +/* HW_ANADIG_TEMPSENSE0_TOG Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_LOW_ALARM_VALUE_MASK 0x1FFu +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_LOW_ALARM_VALUE_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_LOW_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_LOW_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_LOW_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_HIGH_ALARM_VALUE_MASK 0x3FE00u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_HIGH_ALARM_VALUE_SHIFT 9 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_HIGH_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_HIGH_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_HIGH_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_PANIC_ALARM_VALUE_MASK 0x7FC0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_PANIC_ALARM_VALUE_SHIFT 18 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_PANIC_ALARM_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_PANIC_ALARM_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_PANIC_ALARM_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_RSVD1_MASK 0xF8000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_RSVD1_SHIFT 27 +#define TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE0_TOG_RSVD1_MASK) +/* HW_ANADIG_TEMPSENSE1 Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_MASK 0x1FFu +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_MASK 0x200u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_SHIFT 9 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_MASK 0x400u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_SHIFT 10 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK 0x800u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_SHIFT 11 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_RSVD0_MASK 0xF000u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_RSVD0_SHIFT 12 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_RSVD0_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_MASK 0xFFFF0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_SHIFT 16 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_MASK) +/* HW_ANADIG_TEMPSENSE1_SET Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_TEMP_VALUE_MASK 0x1FFu +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_TEMP_VALUE_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_TEMP_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_SET_TEMP_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_SET_TEMP_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_POWER_DOWN_MASK 0x200u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_POWER_DOWN_SHIFT 9 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_TEMP_MASK 0x400u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_TEMP_SHIFT 10 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_FINISHED_MASK 0x800u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_FINISHED_SHIFT 11 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_RSVD0_MASK 0xF000u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_RSVD0_SHIFT 12 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_SET_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_SET_RSVD0_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_FREQ_MASK 0xFFFF0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_FREQ_SHIFT 16 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_FREQ(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_FREQ_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_SET_MEASURE_FREQ_MASK) +/* HW_ANADIG_TEMPSENSE1_CLR Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_TEMP_VALUE_MASK 0x1FFu +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_TEMP_VALUE_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_TEMP_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_TEMP_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_TEMP_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_POWER_DOWN_MASK 0x200u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_POWER_DOWN_SHIFT 9 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_TEMP_MASK 0x400u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_TEMP_SHIFT 10 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_FINISHED_MASK 0x800u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_FINISHED_SHIFT 11 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_RSVD0_MASK 0xF000u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_RSVD0_SHIFT 12 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_RSVD0_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_FREQ_MASK 0xFFFF0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_FREQ_SHIFT 16 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_FREQ(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_FREQ_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_CLR_MEASURE_FREQ_MASK) +/* HW_ANADIG_TEMPSENSE1_TOG Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_TEMP_VALUE_MASK 0x1FFu +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_TEMP_VALUE_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_TEMP_VALUE(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_TEMP_VALUE_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_TEMP_VALUE_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_POWER_DOWN_MASK 0x200u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_POWER_DOWN_SHIFT 9 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_TEMP_MASK 0x400u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_TEMP_SHIFT 10 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_FINISHED_MASK 0x800u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_FINISHED_SHIFT 11 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_RSVD0_MASK 0xF000u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_RSVD0_SHIFT 12 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_RSVD0_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_FREQ_MASK 0xFFFF0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_FREQ_SHIFT 16 +#define TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_FREQ(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_FREQ_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE1_TOG_MEASURE_FREQ_MASK) +/* HW_ANADIG_TEMPSENSE_TRIM Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_VREF_SEL_MASK 0x1Fu +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_VREF_SEL_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_VREF_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_VREF_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_VREF_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD0_MASK 0x60u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD0_SHIFT 5 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD0_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_EN_READ_MASK 0x80u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_EN_READ_SHIFT 7 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_VREF_VBE_SEL_MASK 0x1FF00u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_VREF_VBE_SEL_SHIFT 8 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_VREF_VBE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_VREF_VBE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_VREF_VBE_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD1_MASK 0xE0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD1_SHIFT 17 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD1_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_SLOPE_SEL_MASK 0xF00000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_SLOPE_SEL_SHIFT 20 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_SLOPE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_SLOPE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_BUF_SLOPE_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD2_MASK 0x1F000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD2_SHIFT 24 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD2_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_RSVD2_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_MUX_ADDR_MASK 0xE0000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_MUX_ADDR_SHIFT 29 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_MUX_ADDR(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_MUX_ADDR_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_T_MUX_ADDR_MASK) +/* HW_ANADIG_TEMPSENSE_TRIM_SET Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_VREF_SEL_MASK 0x1Fu +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_VREF_SEL_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_VREF_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_VREF_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_VREF_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD0_MASK 0x60u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD0_SHIFT 5 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD0_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_EN_READ_MASK 0x80u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_EN_READ_SHIFT 7 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_VREF_VBE_SEL_MASK 0x1FF00u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_VREF_VBE_SEL_SHIFT 8 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_VREF_VBE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_VREF_VBE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_VREF_VBE_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD1_MASK 0xE0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD1_SHIFT 17 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD1_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_SLOPE_SEL_MASK 0xF00000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_SLOPE_SEL_SHIFT 20 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_SLOPE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_SLOPE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_BUF_SLOPE_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD2_MASK 0x1F000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD2_SHIFT 24 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD2_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_RSVD2_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_MUX_ADDR_MASK 0xE0000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_MUX_ADDR_SHIFT 29 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_MUX_ADDR(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_MUX_ADDR_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_SET_T_MUX_ADDR_MASK) +/* HW_ANADIG_TEMPSENSE_TRIM_CLR Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_VREF_SEL_MASK 0x1Fu +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_VREF_SEL_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_VREF_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_VREF_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_VREF_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD0_MASK 0x60u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD0_SHIFT 5 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD0_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_EN_READ_MASK 0x80u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_EN_READ_SHIFT 7 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_VREF_VBE_SEL_MASK 0x1FF00u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_VREF_VBE_SEL_SHIFT 8 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_VREF_VBE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_VREF_VBE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_VREF_VBE_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD1_MASK 0xE0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD1_SHIFT 17 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD1_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_SLOPE_SEL_MASK 0xF00000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_SLOPE_SEL_SHIFT 20 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_SLOPE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_SLOPE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_BUF_SLOPE_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD2_MASK 0x1F000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD2_SHIFT 24 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD2_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_RSVD2_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_MUX_ADDR_MASK 0xE0000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_MUX_ADDR_SHIFT 29 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_MUX_ADDR(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_MUX_ADDR_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_CLR_T_MUX_ADDR_MASK) +/* HW_ANADIG_TEMPSENSE_TRIM_TOG Bit Fields */ +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_VREF_SEL_MASK 0x1Fu +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_VREF_SEL_SHIFT 0 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_VREF_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_VREF_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_VREF_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD0_MASK 0x60u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD0_SHIFT 5 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD0(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD0_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD0_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_EN_READ_MASK 0x80u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_EN_READ_SHIFT 7 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_VREF_VBE_SEL_MASK 0x1FF00u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_VREF_VBE_SEL_SHIFT 8 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_VREF_VBE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_VREF_VBE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_VREF_VBE_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD1_MASK 0xE0000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD1_SHIFT 17 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD1(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD1_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD1_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_SLOPE_SEL_MASK 0xF00000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_SLOPE_SEL_SHIFT 20 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_SLOPE_SEL(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_SLOPE_SEL_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_BUF_SLOPE_SEL_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD2_MASK 0x1F000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD2_SHIFT 24 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD2(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD2_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_RSVD2_MASK) +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR_MASK 0xE0000000u +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR_SHIFT 29 +#define TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR(x) (((uint32_t)(((uint32_t)(x))<<TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR_SHIFT))&TEMPMON_HW_ANADIG_TEMPSENSE_TRIM_TOG_T_MUX_ADDR_MASK) + + +#define CCM_GPR(i) (CCM_BASE_ADDRESS + CCM_GPR0_OFFSET + 0x10 * (i)) +#define CCM_OBSERVE(i) (CCM_BASE_ADDRESS + CCM_OBSERVE0_OFFSET + 0x10 * (i)) +#define CCM_SCTRL(i) (CCM_BASE_ADDRESS + CCM_SCTRL0_OFFSET + 0x10 * (i)) +#define CCM_CCGR(i) (CCM_BASE_ADDRESS + CCM_CCGR0_OFFSET + 0x10 * (i)) +#define CCM_ROOT_TARGET(i) (CCM_BASE_ADDRESS + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i)) + +#define CCM_GPR_SET(i) (CCM_BASE_ADDRESS + CCM_GPR0_OFFSET + 0x10 * (i) + 4) +#define CCM_OBSERVE_SET(i) (CCM_BASE_ADDRESS + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 4) +#define CCM_SCTRL_SET(i) (CCM_BASE_ADDRESS + CCM_SCTRL0_OFFSET + 0x10 * (i) + 4) +#define CCM_CCGR_SET(i) (CCM_BASE_ADDRESS + CCM_CCGR0_OFFSET + 0x10 * (i) + 4) +#define CCM_ROOT_TARGET_SET(i) (CCM_BASE_ADDRESS + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 4) + +#define CCM_GPR_CLR(i) (CCM_BASE_ADDRESS + CCM_GPR0_OFFSET + 0x10 * (i) + 8) +#define CCM_OBSERVE_CLR(i) (CCM_BASE_ADDRESS + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 8) +#define CCM_SCTRL_CLR(i) (CCM_BASE_ADDRESS + CCM_SCTRL0_OFFSET + 0x10 * (i) + 8) +#define CCM_CCGR_CLR(i) (CCM_BASE_ADDRESS + CCM_CCGR0_OFFSET + 0x10 * (i) + 8) +#define CCM_ROOT_TARGET_CLR(i) (CCM_BASE_ADDRESS + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 8) + +#define CCM_GPR_TOGGLE(i) (CCM_BASE_ADDRESS + CCM_GPR0_OFFSET + 0x10 * (i) + 12) +#define CCM_OBSERVE_TOGGLE(i) (CCM_BASE_ADDRESS + CCM_OBSERVE0_OFFSET + 0x10 * (i) + 12) +#define CCM_SCTRL_TOGGLE(i) (CCM_BASE_ADDRESS + CCM_SCTRL0_OFFSET + 0x10 * (i) + 12) +#define CCM_CCGR_TOGGLE(i) (CCM_BASE_ADDRESS + CCM_CCGR0_OFFSET + 0x10 * (i) + 12) +#define CCM_ROOT_TARGET_TOGGLE(i) (CCM_BASE_ADDRESS + CCM_ROOT0_TARGET_OFFSET + 0x80 * (i) + 12) + +#define HW_CCM_GPR_WR(i, v) writel((v), CCM_GPR(i)) +#define HW_CCM_CCM_OBSERVE_WR(i, v) writel((v), CCM_OBSERVE(i)) +#define HW_CCM_SCTRL_WR(i, v) writel((v), CCM_SCTRL(i)) +#define HW_CCM_CCGR_WR(i, v) writel((v), CCM_CCGR(i)) +#define HW_CCM_ROOT_TARGET_WR(i, v) writel((v), CCM_ROOT_TARGET(i)) + +#define HW_CCM_GPR_RD(i) readl(CCM_GPR(i)) +#define HW_CCM_CCM_OBSERVE_RD(i) readl(CCM_OBSERVE(i)) +#define HW_CCM_SCTRL_RD(i) readl(CCM_SCTRL(i)) +#define HW_CCM_CCGR_RD(i) readl(CCM_CCGR(i)) +#define HW_CCM_ROOT_TARGET_RD(i) readl(CCM_ROOT_TARGET(i)) + +#define HW_CCM_GPR_SET(i, v) writel((v), CCM_GPR_SET(i)) +#define HW_CCM_CCM_OBSERVE_SET(i, v) writel((v), CCM_CCM_OBSERVE_SET(i)) +#define HW_CCM_SCTRL_SET(i, v) writel((v), CCM_SCTRL_SET(i)) +#define HW_CCM_CCGR_SET(i, v) writel((v), CCM_CCGR_SET(i)) +#define HW_CCM_ROOT_TARGET_SET(i, v) writel((v), CCM_ROOT_TARGET_SET(i)) + +#define HW_CCM_GPR_CLR(i, v) writel((v), CCM_GPR_CLR(i)) +#define HW_CCM_CCM_OBSERVE_CLR(i, v) writel((v), CCM_CCM_OBSERVE_CLR(i)) +#define HW_CCM_SCTRL_CLR(i, v) writel((v), CCM_SCTRL_CLR(i)) +#define HW_CCM_CCGR_CLR(i, v) writel((v), CCM_CCGR_CLR(i)) +#define HW_CCM_ROOT_TARGET_CLR(i, v) writel((v), CCM_ROOT_TARGET_CLR(i)) + +#define HW_CCM_GPR_TOGGLE(i, v) writel((v), CCM_GPR_TOGGLE(i)) +#define HW_CCM_CCM_OBSERVE_TOGGLE(i, v) writel((v), CCM_CCM_OBSERVE_TOGGLE(i)) +#define HW_CCM_SCTRL_TOGGLE(i, v) writel((v), CCM_SCTRL_TOGGLE(i)) +#define HW_CCM_CCGR_TOGGLE(i, v) writel((v), CCM_CCGR_TOGGLE(i)) +#define HW_CCM_ROOT_TARGET_TOGGLE(i, v) writel((v), CCM_ROOT_TARGET_TOGGLE(i)) + +#define CCM_CLK_ON_MSK 0x03 + +#define CCM_ROOT_TGT_POST_DIV_SHIFT 0 +#define CCM_ROOT_TGT_PRE_DIV_SHIFT 15 +#define CCM_ROOT_TGT_MUX_SHIFT 24 +#define CCM_ROOT_TGT_ENABLE_SHIFT 28 +#define CCM_ROOT_TGT_POST_DIV_MSK 0x3F +#define CCM_ROOT_TGT_PRE_DIV_MSK (0x07 << CCM_ROOT_TGT_PRE_DIV_SHIFT) +#define CCM_ROOT_TGT_MUX_MSK (0x07 << CCM_ROOT_TGT_MUX_SHIFT) +#define CCM_ROOT_TGT_ENABLE_MSK (0x01 << CCM_ROOT_TGT_ENABLE_SHIFT) + +#define CCM_ROOT_TGT_POST_DIV(x) ((((x) - 1) << CCM_ROOT_TGT_POST_DIV_SHIFT) & CCM_ROOT_TGT_POST_DIV_MSK) +#define CCM_ROOT_TGT_PRE_DIV(x) ((((x) - 1) << CCM_ROOT_TGT_PRE_DIV_SHIFT) & CCM_ROOT_TGT_PRE_DIV_MSK) +#define CCM_ROOT_TGT_MUX_TO(x) ((((x) - 1) << CCM_ROOT_TGT_MUX_SHIFT) & CCM_ROOT_TGT_MUX_MSK) + +/* + * Field values definition for clock slice TARGET register + */ + +#define CLK_ROOT_ON 0x10000000 +#define CLK_ROOT_OFF 0x0 +#define CLK_ROOT_ENABLE_MASK 0x10000000 +#define CLK_ROOT_ENABLE_SHIFT 28 + +#define CLK_ROOT_ALT0 0x00000000 +#define CLK_ROOT_ALT1 0x01000000 +#define CLK_ROOT_ALT2 0x02000000 +#define CLK_ROOT_ALT3 0x03000000 +#define CLK_ROOT_ALT4 0x04000000 +#define CLK_ROOT_ALT5 0x05000000 +#define CLK_ROOT_ALT6 0x06000000 +#define CLK_ROOT_ALT7 0x07000000 + + +#define DRAM_CLK_ROOT_POST_DIV_MASK 0x00000007 +#define CLK_ROOT_POST_DIV_MASK 0x0000003f +#define CLK_ROOT_POST_DIV_SHIFT 0 +#define CLK_ROOT_POST_DIV(n) ((n << CLK_ROOT_POST_DIV_SHIFT) & CLK_ROOT_POST_DIV_MASK) + +#define CLK_ROOT_AUTO_DIV_MASK 0x00000700 +#define CLK_ROOT_AUTO_DIV_SHIFT 8 +#define CLK_ROOT_AUTO_DIV(n) ((n << CLK_ROOT_AUTO_DIV_SHIFT) & CLK_ROOT_AUTO_DIV_MASK) + +#define CLK_ROOT_AUTO_EN_MASK 0x00001000 +#define CLK_ROOT_AUTO_EN 0x00001000 + +#define CLK_ROOT_PRE_DIV_MASK 0x00070000 +#define CLK_ROOT_PRE_DIV_SHIFT 16 +#define CLK_ROOT_PRE_DIV(n) ((n << CLK_ROOT_PRE_DIV_SHIFT) & CLK_ROOT_PRE_DIV_MASK) + +#define CLK_ROOT_MUX_MASK 0x07000000 +#define CLK_ROOT_MUX_SHIFT 24 + +#define CLK_ROOT_EN_MASK 0x10000000 + +#define CLK_ROOT_AUTO_ON 0x00001000 +#define CLK_ROOT_AUTO_OFF 0x0 + +/* ARM_A7_CLK_ROOT */ +#define ARM_A7_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ARM_A7_CLK_ROOT_FROM_PLL_ARM_MAIN_800M_CLK 0x01000000 +#define ARM_A7_CLK_ROOT_FROM_PLL_DRAM_MAIN_1066M_CLK 0x03000000 +#define ARM_A7_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define ARM_A7_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x05000000 +#define ARM_A7_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK 0x02000000 +#define ARM_A7_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x06000000 +#define ARM_A7_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 + +/* ARM_M4_CLK_ROOT */ +#define ARM_M4_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ARM_M4_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x04000000 +#define ARM_M4_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define ARM_M4_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x03000000 +#define ARM_M4_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x02000000 +#define ARM_M4_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x05000000 +#define ARM_M4_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 +#define ARM_M4_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 + +/* ARM_M0_CLK_ROOT */ +#define ARM_M0_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ARM_M0_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x04000000 +#define ARM_M0_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x01000000 +#define ARM_M0_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x03000000 +#define ARM_M0_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x02000000 +#define ARM_M0_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x05000000 +#define ARM_M0_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 +#define ARM_M0_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 + +/* MAIN_AXI_CLK_ROOT */ +#define MAIN_AXI_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define MAIN_AXI_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define MAIN_AXI_CLK_ROOT_FROM_PLL_SYS_PFD1_332M_CLK 0x01000000 +#define MAIN_AXI_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK 0x04000000 +#define MAIN_AXI_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x07000000 +#define MAIN_AXI_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x03000000 +#define MAIN_AXI_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x05000000 +#define MAIN_AXI_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 + +/* DISP_AXI_CLK_ROOT */ +#define DISP_AXI_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define DISP_AXI_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define DISP_AXI_CLK_ROOT_FROM_PLL_SYS_PFD1_332M_CLK 0x01000000 +#define DISP_AXI_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK 0x04000000 +#define DISP_AXI_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x05000000 +#define DISP_AXI_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x03000000 +#define DISP_AXI_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x06000000 +#define DISP_AXI_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 + +/* ENET_AXI_CLK_ROOT */ +#define ENET_AXI_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ENET_AXI_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define ENET_AXI_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x04000000 +#define ENET_AXI_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x01000000 +#define ENET_AXI_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x07000000 +#define ENET_AXI_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x03000000 +#define ENET_AXI_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x05000000 +#define ENET_AXI_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 + +/* NAND_USDHC_BUS_CLK_ROOT */ +#define NAND_USDHC_BUS_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x03000000 +#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x01000000 +#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x04000000 +#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK 0x05000000 +#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x06000000 +#define NAND_USDHC_BUS_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x07000000 + +/* AHB_CLK_ROOT */ +#define AHB_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define AHB_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define AHB_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x03000000 +#define AHB_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define AHB_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x04000000 +#define AHB_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x06000000 +#define AHB_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 +#define AHB_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x05000000 + +/* DRAM_PHYM_CLK_ROOT */ +#define DRAM_PHYM_CLK_ROOT_FROM_PLL_DRAM_MAIN_1066M_CLK 0x00000000 +#define DRAM_PHYM_CLK_ROOT_FROM_PLL_DRAM_PHYM_ALT_CLK_ROOT 0x01000000 + +/* DRAM_CLK_ROOT */ +#define DRAM_CLK_ROOT_FROM_PLL_DRAM_MAIN_1066M_CLK 0x00000000 +#define DRAM_CLK_ROOT_FROM_PLL_DRAM_ALT_CLK_ROOT 0x01000000 + +/* DRAM_PHYM_ALT_CLK_ROOT */ +#define DRAM_PHYM_ALT_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x01000000 +#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x02000000 +#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x05000000 +#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK 0x03000000 +#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x06000000 +#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 +#define DRAM_PHYM_ALT_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x04000000 + +/* DRAM_ALT_CLK_ROOT */ +#define DRAM_ALT_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define DRAM_ALT_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x01000000 +#define DRAM_ALT_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x02000000 +#define DRAM_ALT_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x05000000 +#define DRAM_ALT_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x07000000 +#define DRAM_ALT_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK 0x03000000 +#define DRAM_ALT_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x04000000 +#define DRAM_ALT_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x06000000 + +/* USB_HSIC_CLK_ROOT */ +#define USB_HSIC_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x01000000 +#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK 0x03000000 +#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x04000000 +#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK 0x05000000 +#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK 0x06000000 +#define USB_HSIC_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x07000000 +#define USB_HSIC_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x02000000 + +/* PCIE_CTRL_CLK_ROOT */ +#define PCIE_CTRL_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define PCIE_CTRL_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x04000000 +#define PCIE_CTRL_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x02000000 +#define PCIE_CTRL_CLK_ROOT_FROM_PLL_SYS_PFD1_332M_CLK 0x06000000 +#define PCIE_CTRL_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x03000000 +#define PCIE_CTRL_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK 0x07000000 +#define PCIE_CTRL_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK 0x05000000 +#define PCIE_CTRL_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x01000000 + +/* PCIE_PHY_CLK_ROOT */ +#define PCIE_PHY_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define PCIE_PHY_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x07000000 +#define PCIE_PHY_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK 0x02000000 +#define PCIE_PHY_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define PCIE_PHY_CLK_ROOT_FROM_EXT_CLK_1 0x03000000 +#define PCIE_PHY_CLK_ROOT_FROM_EXT_CLK_2 0x04000000 +#define PCIE_PHY_CLK_ROOT_FROM_EXT_CLK_3 0x05000000 +#define PCIE_PHY_CLK_ROOT_FROM_EXT_CLK_4 0x06000000 + +/* EPDC_PIXEL_CLK_ROOT */ +#define EPDC_PIXEL_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x03000000 +#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD1_332M_CLK 0x01000000 +#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK 0x04000000 +#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK 0x05000000 +#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x06000000 +#define EPDC_PIXEL_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 + +/* LCDIF_PIXEL_CLK_ROOT */ +#define LCDIF_PIXEL_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x05000000 +#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x04000000 +#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK 0x01000000 +#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 +#define LCDIF_PIXEL_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 +#define LCDIF_PIXEL_CLK_ROOT_FROM_EXT_CLK_3 0x03000000 + +/* MIPI_DSI_EXTSER_CLK_ROOT */ +#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x05000000 +#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x03000000 +#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_SYS_PFD0_196M_CLK 0x04000000 +#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK 0x02000000 +#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK 0x01000000 +#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x07000000 +#define MIPI_DSI_EXTSER_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 + +/* MIPI_CSI_WARP_CLK_ROOT */ +#define MIPI_CSI_WARP_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x05000000 +#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x03000000 +#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_SYS_PFD0_196M_CLK 0x04000000 +#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK 0x02000000 +#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x01000000 +#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x07000000 +#define MIPI_CSI_WARP_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 + +/* MIPI_DPHY_REF_CLK_ROOT */ +#define MIPI_DPHY_REF_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define MIPI_DPHY_REF_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define MIPI_DPHY_REF_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x01000000 +#define MIPI_DPHY_REF_CLK_ROOT_FROM_PLL_SYS_PFD5_CLK 0x03000000 +#define MIPI_DPHY_REF_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 +#define MIPI_DPHY_REF_CLK_ROOT_FROM_REF_1M_CLK 0x04000000 +#define MIPI_DPHY_REF_CLK_ROOT_FROM_EXT_CLK_2 0x05000000 +#define MIPI_DPHY_REF_CLK_ROOT_FROM_EXT_CLK_3 0x07000000 + +/* SAI1_CLK_ROOT */ +#define SAI1_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define SAI1_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define SAI1_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define SAI1_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x05000000 +#define SAI1_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x06000000 +#define SAI1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x02000000 +#define SAI1_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x04000000 +#define SAI1_CLK_ROOT_FROM_EXT_CLK_2 0x07000000 + +/* SAI2_CLK_ROOT */ +#define SAI2_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define SAI2_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define SAI2_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define SAI2_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x05000000 +#define SAI2_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x06000000 +#define SAI2_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x02000000 +#define SAI2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x04000000 +#define SAI2_CLK_ROOT_FROM_EXT_CLK_2 0x07000000 + +/* SAI3_CLK_ROOT */ +#define SAI3_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define SAI3_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define SAI3_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define SAI3_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x05000000 +#define SAI3_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x06000000 +#define SAI3_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x02000000 +#define SAI3_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x04000000 +#define SAI3_CLK_ROOT_FROM_EXT_CLK_3 0x07000000 + +/* SPDIF_CLK_ROOT */ +#define SPDIF_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define SPDIF_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define SPDIF_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define SPDIF_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x05000000 +#define SPDIF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x06000000 +#define SPDIF_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x02000000 +#define SPDIF_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x04000000 +#define SPDIF_CLK_ROOT_FROM_EXT_CLK_3 0x07000000 + +/* ENET1_REF_CLK_ROOT */ +#define ENET1_REF_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ENET1_REF_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x04000000 +#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x01000000 +#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK 0x02000000 +#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK 0x03000000 +#define ENET1_REF_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x05000000 +#define ENET1_REF_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 +#define ENET1_REF_CLK_ROOT_FROM_EXT_CLK_4 0x07000000 + +/* ENET1_TIME_CLK_ROOT */ +#define ENET1_TIME_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define ENET1_TIME_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x02000000 +#define ENET1_TIME_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 +#define ENET1_TIME_CLK_ROOT_FROM_EXT_CLK_1 0x03000000 +#define ENET1_TIME_CLK_ROOT_FROM_EXT_CLK_2 0x04000000 +#define ENET1_TIME_CLK_ROOT_FROM_EXT_CLK_3 0x05000000 +#define ENET1_TIME_CLK_ROOT_FROM_EXT_CLK_4 0x06000000 + +/* ENET2_REF_CLK_ROOT */ +#define ENET2_REF_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ENET2_REF_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x04000000 +#define ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x01000000 +#define ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK 0x02000000 +#define ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK 0x03000000 +#define ENET2_REF_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x05000000 +#define ENET2_REF_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 +#define ENET2_REF_CLK_ROOT_FROM_EXT_CLK_4 0x07000000 + +/* ENET2_TIME_CLK_ROOT */ +#define ENET2_TIME_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ENET2_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define ENET2_TIME_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x02000000 +#define ENET2_TIME_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 +#define ENET2_TIME_CLK_ROOT_FROM_EXT_CLK_1 0x03000000 +#define ENET2_TIME_CLK_ROOT_FROM_EXT_CLK_2 0x04000000 +#define ENET2_TIME_CLK_ROOT_FROM_EXT_CLK_3 0x05000000 +#define ENET2_TIME_CLK_ROOT_FROM_EXT_CLK_4 0x06000000 + +/* ENET_PHY_REF_CLK_ROOT */ +#define ENET_PHY_REF_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x04000000 +#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK 0x07000000 +#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x03000000 +#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK 0x02000000 +#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK 0x01000000 +#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x05000000 +#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 + +/* EIM_CLK_ROOT */ +#define EIM_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define EIM_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define EIM_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define EIM_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x04000000 +#define EIM_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define EIM_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK 0x05000000 +#define EIM_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x06000000 +#define EIM_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 + +/* NAND_CLK_ROOT */ +#define NAND_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define NAND_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define NAND_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x01000000 +#define NAND_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x03000000 +#define NAND_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK 0x04000000 +#define NAND_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK 0x05000000 +#define NAND_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x06000000 +#define NAND_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 + +/* QSPI_CLK_ROOT */ +#define QSPI_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define QSPI_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define QSPI_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x05000000 +#define QSPI_CLK_ROOT_FROM_PLL_SYS_PFD3_CLK 0x04000000 +#define QSPI_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x01000000 +#define QSPI_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK 0x06000000 +#define QSPI_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x07000000 +#define QSPI_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK 0x03000000 + +/* USDHC1_CLK_ROOT */ +#define USDHC1_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define USDHC1_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x01000000 +#define USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x05000000 +#define USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x04000000 +#define USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK 0x06000000 +#define USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x07000000 +#define USDHC1_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK 0x03000000 + +/* USDHC2_CLK_ROOT */ +#define USDHC2_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define USDHC2_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define USDHC2_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x01000000 +#define USDHC2_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x05000000 +#define USDHC2_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x04000000 +#define USDHC2_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK 0x06000000 +#define USDHC2_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x07000000 +#define USDHC2_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK 0x03000000 + +/* USDHC3_CLK_ROOT */ +#define USDHC3_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define USDHC3_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define USDHC3_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x01000000 +#define USDHC3_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x05000000 +#define USDHC3_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x04000000 +#define USDHC3_CLK_ROOT_FROM_PLL_SYS_PFD6_CLK 0x06000000 +#define USDHC3_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x07000000 +#define USDHC3_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK 0x03000000 + +/* CAN1_CLK_ROOT */ +#define CAN1_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define CAN1_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define CAN1_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x03000000 +#define CAN1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x01000000 +#define CAN1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x04000000 +#define CAN1_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x05000000 +#define CAN1_CLK_ROOT_FROM_EXT_CLK_1 0x06000000 +#define CAN1_CLK_ROOT_FROM_EXT_CLK_4 0x07000000 + +/* CAN2_CLK_ROOT */ +#define CAN2_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define CAN2_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define CAN2_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x03000000 +#define CAN2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x01000000 +#define CAN2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x04000000 +#define CAN2_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x05000000 +#define CAN2_CLK_ROOT_FROM_EXT_CLK_1 0x06000000 +#define CAN2_CLK_ROOT_FROM_EXT_CLK_3 0x07000000 + +/* I2C1_CLK_ROOT */ +#define I2C1_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define I2C1_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define I2C1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x01000000 +#define I2C1_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x07000000 +#define I2C1_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK 0x02000000 +#define I2C1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x04000000 +#define I2C1_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x05000000 +#define I2C1_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x06000000 + +/* I2C2_CLK_ROOT */ +#define I2C2_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define I2C2_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define I2C2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x01000000 +#define I2C2_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x07000000 +#define I2C2_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK 0x02000000 +#define I2C2_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x04000000 +#define I2C2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x05000000 +#define I2C2_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x06000000 + +/* I2C3_CLK_ROOT */ +#define I2C3_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define I2C3_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define I2C3_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x01000000 +#define I2C3_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x07000000 +#define I2C3_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK 0x02000000 +#define I2C3_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x04000000 +#define I2C3_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x05000000 +#define I2C3_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x06000000 + +/* I2C4_CLK_ROOT */ +#define I2C4_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define I2C4_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define I2C4_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x01000000 +#define I2C4_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x07000000 +#define I2C4_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK 0x02000000 +#define I2C4_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x04000000 +#define I2C4_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x05000000 +#define I2C4_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x06000000 + +/* UART1_CLK_ROOT */ +#define UART1_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define UART1_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define UART1_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define UART1_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x03000000 +#define UART1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x02000000 +#define UART1_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 +#define UART1_CLK_ROOT_FROM_EXT_CLK_2 0x05000000 +#define UART1_CLK_ROOT_FROM_EXT_CLK_4 0x06000000 + +/* UART2_CLK_ROOT */ +#define UART2_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define UART2_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define UART2_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define UART2_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x03000000 +#define UART2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x02000000 +#define UART2_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 +#define UART2_CLK_ROOT_FROM_EXT_CLK_2 0x05000000 +#define UART2_CLK_ROOT_FROM_EXT_CLK_3 0x06000000 + +/* UART3_CLK_ROOT */ +#define UART3_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define UART3_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define UART3_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define UART3_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x03000000 +#define UART3_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x02000000 +#define UART3_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 +#define UART3_CLK_ROOT_FROM_EXT_CLK_2 0x05000000 +#define UART3_CLK_ROOT_FROM_EXT_CLK_4 0x06000000 + +/* UART4_CLK_ROOT */ +#define UART4_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define UART4_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define UART4_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define UART4_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x03000000 +#define UART4_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x02000000 +#define UART4_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 +#define UART4_CLK_ROOT_FROM_EXT_CLK_2 0x05000000 +#define UART4_CLK_ROOT_FROM_EXT_CLK_3 0x06000000 + +/* UART5_CLK_ROOT */ +#define UART5_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define UART5_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define UART5_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define UART5_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x03000000 +#define UART5_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x02000000 +#define UART5_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 +#define UART5_CLK_ROOT_FROM_EXT_CLK_2 0x05000000 +#define UART5_CLK_ROOT_FROM_EXT_CLK_4 0x06000000 + +/* UART6_CLK_ROOT */ +#define UART6_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define UART6_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define UART6_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define UART6_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x03000000 +#define UART6_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x02000000 +#define UART6_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 +#define UART6_CLK_ROOT_FROM_EXT_CLK_2 0x05000000 +#define UART6_CLK_ROOT_FROM_EXT_CLK_3 0x06000000 + +/* UART7_CLK_ROOT */ +#define UART7_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define UART7_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define UART7_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define UART7_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x03000000 +#define UART7_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x02000000 +#define UART7_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 +#define UART7_CLK_ROOT_FROM_EXT_CLK_2 0x05000000 +#define UART7_CLK_ROOT_FROM_EXT_CLK_4 0x06000000 + +/* ECSPI1_CLK_ROOT */ +#define ECSPI1_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ECSPI1_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define ECSPI1_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define ECSPI1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x03000000 +#define ECSPI1_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x05000000 +#define ECSPI1_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x06000000 +#define ECSPI1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x02000000 +#define ECSPI1_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 + +/* ECSPI2_CLK_ROOT */ +#define ECSPI2_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ECSPI2_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define ECSPI2_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define ECSPI2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x03000000 +#define ECSPI2_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x05000000 +#define ECSPI2_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x06000000 +#define ECSPI2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x02000000 +#define ECSPI2_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 + +/* ECSPI3_CLK_ROOT */ +#define ECSPI3_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ECSPI3_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define ECSPI3_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define ECSPI3_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x03000000 +#define ECSPI3_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x05000000 +#define ECSPI3_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x06000000 +#define ECSPI3_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x02000000 +#define ECSPI3_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 + +/* ECSPI4_CLK_ROOT */ +#define ECSPI4_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define ECSPI4_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK 0x04000000 +#define ECSPI4_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define ECSPI4_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x03000000 +#define ECSPI4_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK 0x05000000 +#define ECSPI4_CLK_ROOT_FROM_PLL_ENET_MAIN_250M_CLK 0x06000000 +#define ECSPI4_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x02000000 +#define ECSPI4_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 + +/* PWM1_CLK_ROOT */ +#define PWM1_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define PWM1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define PWM1_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define PWM1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x03000000 +#define PWM1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x04000000 +#define PWM1_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 +#define PWM1_CLK_ROOT_FROM_REF_1M_CLK 0x06000000 +#define PWM1_CLK_ROOT_FROM_EXT_CLK_1 0x05000000 + +/* PWM2_CLK_ROOT */ +#define PWM2_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define PWM2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define PWM2_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define PWM2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x03000000 +#define PWM2_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x04000000 +#define PWM2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 +#define PWM2_CLK_ROOT_FROM_REF_1M_CLK 0x06000000 +#define PWM2_CLK_ROOT_FROM_EXT_CLK_1 0x05000000 + +/* PWM3_CLK_ROOT */ +#define PWM3_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define PWM3_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define PWM3_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define PWM3_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x03000000 +#define PWM3_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x04000000 +#define PWM3_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 +#define PWM3_CLK_ROOT_FROM_REF_1M_CLK 0x06000000 +#define PWM3_CLK_ROOT_FROM_EXT_CLK_2 0x05000000 + +/* PWM4_CLK_ROOT */ +#define PWM4_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define PWM4_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define PWM4_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define PWM4_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x03000000 +#define PWM4_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x04000000 +#define PWM4_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 +#define PWM4_CLK_ROOT_FROM_REF_1M_CLK 0x06000000 +#define PWM4_CLK_ROOT_FROM_EXT_CLK_2 0x05000000 + +/* FLEXTIMER1_CLK_ROOT */ +#define FLEXTIMER1_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define FLEXTIMER1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define FLEXTIMER1_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define FLEXTIMER1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x03000000 +#define FLEXTIMER1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x04000000 +#define FLEXTIMER1_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 +#define FLEXTIMER1_CLK_ROOT_FROM_REF_1M_CLK 0x06000000 +#define FLEXTIMER1_CLK_ROOT_FROM_EXT_CLK_3 0x05000000 + +/* FLEXTIMER2_CLK_ROOT */ +#define FLEXTIMER2_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define FLEXTIMER2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define FLEXTIMER2_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define FLEXTIMER2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x03000000 +#define FLEXTIMER2_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x04000000 +#define FLEXTIMER2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x07000000 +#define FLEXTIMER2_CLK_ROOT_FROM_REF_1M_CLK 0x06000000 +#define FLEXTIMER2_CLK_ROOT_FROM_EXT_CLK_3 0x05000000 + +/* SIM1_CLK_ROOT */ +#define SIM1_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define SIM1_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define SIM1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define SIM1_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define SIM1_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x07000000 +#define SIM1_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x06000000 +#define SIM1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x05000000 +#define SIM1_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x04000000 + +/* SIM2_CLK_ROOT */ +#define SIM2_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define SIM2_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define SIM2_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define SIM2_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define SIM2_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x07000000 +#define SIM2_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x06000000 +#define SIM2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x05000000 +#define SIM2_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x04000000 + +/* GPT1_CLK_ROOT */ +#define GPT1_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define GPT1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x02000000 +#define GPT1_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define GPT1_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x03000000 +#define GPT1_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x06000000 +#define GPT1_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x04000000 +#define GPT1_CLK_ROOT_FROM_REF_1M_CLK 0x05000000 +#define GPT1_CLK_ROOT_FROM_EXT_CLK_1 0x07000000 + +/* GPT2_CLK_ROOT */ +#define GPT2_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define GPT2_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x02000000 +#define GPT2_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define GPT2_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x03000000 +#define GPT2_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x06000000 +#define GPT2_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x04000000 +#define GPT2_CLK_ROOT_FROM_REF_1M_CLK 0x05000000 +#define GPT2_CLK_ROOT_FROM_EXT_CLK_2 0x07000000 + +/* GPT3_CLK_ROOT */ +#define GPT3_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define GPT3_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x02000000 +#define GPT3_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define GPT3_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x03000000 +#define GPT3_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x06000000 +#define GPT3_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x04000000 +#define GPT3_CLK_ROOT_FROM_REF_1M_CLK 0x05000000 +#define GPT3_CLK_ROOT_FROM_EXT_CLK_3 0x07000000 + +/* GPT4_CLK_ROOT */ +#define GPT4_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define GPT4_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK 0x02000000 +#define GPT4_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000 +#define GPT4_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x03000000 +#define GPT4_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x06000000 +#define GPT4_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x04000000 +#define GPT4_CLK_ROOT_FROM_REF_1M_CLK 0x05000000 +#define GPT4_CLK_ROOT_FROM_EXT_CLK_4 0x07000000 + +/* TRACE_CLK_ROOT */ +#define TRACE_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define TRACE_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define TRACE_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define TRACE_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define TRACE_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x04000000 +#define TRACE_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x05000000 +#define TRACE_CLK_ROOT_FROM_EXT_CLK_1 0x06000000 +#define TRACE_CLK_ROOT_FROM_EXT_CLK_3 0x07000000 + +/* WDOG_CLK_ROOT */ +#define WDOG_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define WDOG_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define WDOG_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define WDOG_CLK_ROOT_FROM_PLL_SYS_PFD1_166M_CLK 0x07000000 +#define WDOG_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define WDOG_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x04000000 +#define WDOG_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x05000000 +#define WDOG_CLK_ROOT_FROM_REF_1M_CLK 0x06000000 + +/* CSI_MCLK_CLK_ROOT */ +#define CSI_MCLK_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define CSI_MCLK_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define CSI_MCLK_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define CSI_MCLK_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define CSI_MCLK_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x04000000 +#define CSI_MCLK_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x05000000 +#define CSI_MCLK_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 +#define CSI_MCLK_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 + +/* AUDIO_MCLK_CLK_ROOT */ +#define AUDIO_MCLK_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x03000000 +#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK 0x02000000 +#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_SYS_PFD2_135M_CLK 0x01000000 +#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x04000000 +#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_AUDIO_MAIN_CLK 0x05000000 +#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 +#define AUDIO_MCLK_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x07000000 + +/* WRCLK_CLK_ROOT */ +#define WRCLK_CLK_ROOT_FROM_OSC_24M_CLK 0x00000000 +#define WRCLK_CLK_ROOT_FROM_PLL_DRAM_MAIN_533M_CLK 0x02000000 +#define WRCLK_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK 0x04000000 +#define WRCLK_CLK_ROOT_FROM_PLL_SYS_PFD2_270M_CLK 0x05000000 +#define WRCLK_CLK_ROOT_FROM_PLL_SYS_PFD7_CLK 0x07000000 +#define WRCLK_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK 0x06000000 +#define WRCLK_CLK_ROOT_FROM_PLL_ENET_MAIN_40M_CLK 0x01000000 +#define WRCLK_CLK_ROOT_FROM_PLL_USB_MAIN_480M_CLK 0x03000000 + +/* IPP_DO_CLKO1 */ +#define IPP_DO_CLKO1_FROM_OSC_24M_CLK 0x00000000 +#define IPP_DO_CLKO1_FROM_PLL_DRAM_MAIN_533M_CLK 0x06000000 +#define IPP_DO_CLKO1_FROM_PLL_SYS_MAIN_480M_CLK 0x01000000 +#define IPP_DO_CLKO1_FROM_PLL_SYS_MAIN_240M_CLK 0x02000000 +#define IPP_DO_CLKO1_FROM_PLL_SYS_PFD0_196M_CLK 0x03000000 +#define IPP_DO_CLKO1_FROM_PLL_SYS_PFD3_CLK 0x04000000 +#define IPP_DO_CLKO1_FROM_PLL_ENET_MAIN_500M_CLK 0x05000000 +#define IPP_DO_CLKO1_FROM_REF_1M_CLK 0x07000000 + +/* IPP_DO_CLKO2 */ +#define IPP_DO_CLKO2_FROM_OSC_24M_CLK 0x00000000 +#define IPP_DO_CLKO2_FROM_PLL_SYS_MAIN_240M_CLK 0x01000000 +#define IPP_DO_CLKO2_FROM_PLL_SYS_PFD0_392M_CLK 0x02000000 +#define IPP_DO_CLKO2_FROM_PLL_SYS_PFD1_166M_CLK 0x03000000 +#define IPP_DO_CLKO2_FROM_PLL_SYS_PFD4_CLK 0x04000000 +#define IPP_DO_CLKO2_FROM_PLL_AUDIO_MAIN_CLK 0x05000000 +#define IPP_DO_CLKO2_FROM_PLL_VIDEO_MAIN_CLK 0x06000000 +#define IPP_DO_CLKO2_FROM_OSC_32K_CLK 0x07000000 + +#endif diff --git a/arch/arm/include/asm/arch-mx7/imx-regs.h b/arch/arm/include/asm/arch-mx7/imx-regs.h new file mode 100644 index 0000000000..4dc11ee981 --- /dev/null +++ b/arch/arm/include/asm/arch-mx7/imx-regs.h @@ -0,0 +1,1307 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_MX7_IMX_REGS_H__ +#define __ASM_ARCH_MX7_IMX_REGS_H__ + +#define ARCH_MXC + +#define CONFIG_SYS_CACHELINE_SIZE 64 + +#define ROM_SW_INFO_ADDR 0x000001E8 +#define ROMCP_ARB_BASE_ADDR 0x00000000 +#define ROMCP_ARB_END_ADDR 0x00017FFF +#define BOOT_ROM_BASE_ADDR ROMCP_ARB_BASE_ADDR +#define CAAM_ARB_BASE_ADDR 0x00100000 +#define CAAM_ARB_END_ADDR 0x00107FFF +#define GIC400_ARB_BASE_ADDR 0x31000000 +#define GIC400_ARB_END_ADDR 0x31007FFF +#define APBH_DMA_ARB_BASE_ADDR 0x33000000 +#define APBH_DMA_ARB_END_ADDR 0x33007FFF +#define M4_BOOTROM_BASE_ADDR 0x00180000 + +#define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR +#define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000) +#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000) + +/* GPV - PL301 configuration ports */ +#define GPV0_BASE_ADDR 0x32000000 +#define GPV1_BASE_ADDR 0x32100000 +#define GPV2_BASE_ADDR 0x32200000 +#define GPV3_BASE_ADDR 0x32300000 +#define GPV4_BASE_ADDR 0x32400000 +#define GPV5_BASE_ADDR 0x32500000 +#define GPV6_BASE_ADDR 0x32600000 +#define GPV7_BASE_ADDR 0x32700000 + +#define OCRAM_ARB_BASE_ADDR 0x00900000 +#define OCRAM_ARB_END_ADDR 0x0091FFFF +#define OCRAM_EPDC_BASE_ADDR 0x00920000 +#define OCRAM_EPDC_END_ADDR 0x0093FFFF +#define OCRAM_PXP_BASE_ADDR 0x00940000 +#define OCRAM_PXP_END_ADDR 0x00947FFF +#define IRAM_BASE_ADDR OCRAM_ARB_BASE_ADDR +#define IRAM_SIZE 0x00020000 + +#define AIPS1_ARB_BASE_ADDR 0x30000000 +#define AIPS1_ARB_END_ADDR 0x303FFFFF +#define AIPS2_ARB_BASE_ADDR 0x30400000 +#define AIPS2_ARB_END_ADDR 0x307FFFFF +#define AIPS3_ARB_BASE_ADDR 0x30800000 +#define AIPS3_ARB_END_ADDR 0x30BFFFFF + +#define WEIM_ARB_BASE_ADDR 0x28000000 +#define WEIM_ARB_END_ADDR 0x2FFFFFFF + +#define QSPI0_ARB_BASE_ADDR 0x60000000 +#define QSPI0_ARB_END_ADDR 0x6FFFFFFF +#define PCIE_ARB_BASE_ADDR 0x40000000 +#define PCIE_ARB_END_ADDR 0x4FFFFFFF +#define PCIE_REG_BASE_ADDR 0x33800000 +#define PCIE_REG_END_ADDR 0x33803FFF + +#define MMDC0_ARB_BASE_ADDR 0x80000000 +#define MMDC0_ARB_END_ADDR 0xBFFFFFFF +#define MMDC1_ARB_BASE_ADDR 0xC0000000 +#define MMDC1_ARB_END_ADDR 0xFFFFFFFF + +/* Cortex-A9 MPCore private memory region */ +#define ARM_PERIPHBASE 0x31000000 +#define SCU_BASE_ADDR ARM_PERIPHBASE +#define GLOBAL_TIMER_BASE_ADDR (ARM_PERIPHBASE + 0x0200) +#define PRIVATE_TIMERS_WD_BASE_ADDR (ARM_PERIPHBASE + 0x0600) + + +/* Defines for Blocks connected via AIPS (SkyBlue) */ +#define AIPS_TZ1_BASE_ADDR AIPS1_ARB_BASE_ADDR +#define AIPS_TZ2_BASE_ADDR AIPS2_ARB_BASE_ADDR +#define AIPS_TZ3_BASE_ADDR AIPS3_ARB_BASE_ADDR + +/* DAP base-address */ +#define ARM_IPS_BASE_ADDR AIPS1_ARB_BASE_ADDR + +/* AIPS_TZ#1- On Platform */ +#define AIPS1_ON_BASE_ADDR (AIPS_TZ1_BASE_ADDR+0x1F0000) +/* AIPS_TZ#1- Off Platform */ +#define AIPS1_OFF_BASE_ADDR (AIPS_TZ1_BASE_ADDR+0x200000) + +#define GPIO1_BASE_ADDR AIPS1_OFF_BASE_ADDR +#define GPIO2_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x10000) +#define GPIO3_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x20000) +#define GPIO4_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x30000) +#define GPIO5_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x40000) +#define GPIO6_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x50000) +#define GPIO7_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x60000) +#define IOMUXC_LPSR_GPR_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x70000) +#define WDOG1_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x80000) +#define WDOG2_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x90000) +#define WDOG3_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0xA0000) +#define WDOG4_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0xB0000) +#define IOMUXC_LPSR_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0xC0000) +#define GPT_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0xD0000) +#define GPT1_BASE_ADDR GPT_IPS_BASE_ADDR +#define GPT2_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0xE0000) +#define GPT3_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0xF0000) +#define GPT4_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x100000) +#define ROMCP_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x110000) +#define KPP_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x120000) +#define IOMUXC_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x130000) +#define IOMUXC_BASE_ADDR IOMUXC_IPS_BASE_ADDR +#define IOMUXC_GPR_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x140000) +#define OCOTP_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x150000) +#define ANATOP_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x160000) +#define SNVS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x170000) +#define CCM_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x180000) +#define SRC_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x190000) +#define GPC_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x1A0000) +#define SEMA41_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x1B0000) +#define SEMA42_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x1C0000) +#define RDC_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x1D0000) +#define CSU_IPS_BASE_ADDR (AIPS1_OFF_BASE_ADDR+0x1E0000) + +/* AIPS_TZ#2- On Platform */ +#define AIPS2_ON_BASE_ADDR (AIPS_TZ2_BASE_ADDR+0x1F0000) +/* AIPS_TZ#2- Off Platform */ +#define AIPS2_OFF_BASE_ADDR (AIPS_TZ2_BASE_ADDR+0x200000) +#define ADC1_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x10000) +#define ADC2_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x20000) +#define ECSPI4_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x30000) +#define FTM1_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x40000) +#define FTM2_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x50000) +#define PWM1_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x60000) +#define PWM2_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x70000) +#define PWM3_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x80000) +#define PWM4_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x90000) +#define SYSCNT_RD_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0xA0000) +#define SYSCNT_CMP_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0xB0000) +#define SYSCNT_CTRL_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0xC0000) +#define PCIE_PHY_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0xD0000) +#define EPDC_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0xF0000) +#define EPDC_BASE_ADDR EPDC_IPS_BASE_ADDR +#define EPXP_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x100000) +#define CSI1_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x110000) +#define ELCDIF1_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x130000) +#define MIPI_CSI2_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x150000) +#define MIPI_DSI_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x160000) +#define IP2APB_TZASC1_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x180000) +#define DDRPHY_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x190000) +#define DDRC_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x1A0000) +#define IP2APB_PERFMON1_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x1C0000) +#define IP2APB_PERFMON2_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x1D0000) +#define IP2APB_AXIMON_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x1E0000) +#define QOSC_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR+0x1F0000) + +/* AIPS_TZ#3 - Global enable (0) */ +#define ECSPI1_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0x20000) +#define ECSPI2_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0x30000) +#define ECSPI3_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0x40000) +#define UART1_IPS_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0x60000) +#define UART3_IPS_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0x80000) +#define UART2_IPS_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0x90000) +#define SAI1_IPS_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0xA0000) +#define SAI2_IPS_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0xB0000) +#define SAI3_IPS_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0xC0000) +#define SPBA_IPS_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0xF0000) +#define CAAM_IPS_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0x100000) + +/* AIPS_TZ#3- On Platform */ +#define AIPS3_ON_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0x1F0000) +/* AIPS_TZ#3- Off Platform */ +#define AIPS3_OFF_BASE_ADDR (AIPS_TZ3_BASE_ADDR+0x200000) +#define CAN1_IPS_BASE_ADDR AIPS3_OFF_BASE_ADDR +#define CAN2_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x10000) +#define I2C1_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x20000) +#define I2C2_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x30000) +#define I2C3_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x40000) +#define I2C4_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x50000) +#define UART4_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x60000) +#define UART5_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x70000) +#define UART6_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x80000) +#define UART7_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x90000) +#define MUCPU_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0xA0000) +#define MUDSP_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0xB0000) +#define HS_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0xC0000) +#define USBOH2_PL301_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0xD0000) +#define USBOTG1_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x110000) +#define USBOTG2_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x120000) +#define USBHSIC_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x130000) +#define USDHC1_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x140000) +#define USDHC2_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x150000) +#define USDHC3_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x160000) +#define EMVSIM1_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x190000) +#define EMVSIM2_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x1A0000) +#define SIM1_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x190000) +#define SIM2_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x1A0000) +#define QSPI1_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x1B0000) +#define WEIM_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x1C0000) +#define SDMA_PORT_IPS_HOST_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x1D0000) +#define ENET_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x1E0000) +#define ENET2_IPS_BASE_ADDR (AIPS3_OFF_BASE_ADDR+0x1F0000) + +#define AIPS1_BASE_ADDR AIPS1_ON_BASE_ADDR +#define AIPS2_BASE_ADDR AIPS2_ON_BASE_ADDR +#define AIPS3_BASE_ADDR AIPS3_ON_BASE_ADDR + +#define SDMA_IPS_HOST_BASE_ADDR SDMA_PORT_IPS_HOST_BASE_ADDR +#define SDMA_IPS_HOST_IPS_BASE_ADDR SDMA_PORT_IPS_HOST_BASE_ADDR + +#define SCTR_BASE_ADDR SYSCNT_CTRL_IPS_BASE_ADDR +#define DEBUG_MONITOR_BASE_ADDR IP2APB_AXIMON_IPS_BASE_ADDR + +#define USB_BASE_ADDR USBOTG1_IPS_BASE_ADDR + +#define FEC_QUIRK_ENET_MAC +#define SNVS_LPGPR 0x68 + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/types.h> + +extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac); + +/* System Reset Controller (SRC) */ +struct src { + u32 scr; + u32 a7rcr0; + u32 a7rcr1; + u32 m4rcr; + u32 reserved1; + u32 ercr; + u32 reserved2; + u32 hsicphy_rcr; + u32 usbophy1_rcr; + u32 usbophy2_rcr; + u32 mipiphy_rcr; + u32 pciephy_rcr; + u32 reserved3[10]; + u32 sbmr1; + u32 srsr; + u32 reserved4[2]; + u32 sisr; + u32 simr; + u32 sbmr2; + u32 gpr1; + u32 gpr2; + u32 gpr3; + u32 gpr4; + u32 gpr5; + u32 gpr6; + u32 gpr7; + u32 gpr8; + u32 gpr9; + u32 gpr10; + u32 reserved5[985]; + u32 ddrc_rcr; +}; + +/* GPR0 Bit Fields */ +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL0_MASK 0x1u +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL0_SHIFT 0 +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL1_MASK 0x2u +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL1_SHIFT 1 +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL2_MASK 0x4u +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL2_SHIFT 2 +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL3_MASK 0x8u +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL3_SHIFT 3 +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL4_MASK 0x10u +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL4_SHIFT 4 +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL5_MASK 0x20u +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL5_SHIFT 5 +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL6_MASK 0x40u +#define IOMUXC_GPR_GPR0_DMAREQ_MUX_SEL6_SHIFT 6 +/* GPR1 Bit Fields */ +#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS0_MASK 0x1u +#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS0_SHIFT 0 +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS0_MASK 0x6u +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS0_SHIFT 1 +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS0(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS0_SHIFT))&IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS0_MASK) +#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS1_MASK 0x8u +#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS1_SHIFT 3 +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS1_MASK 0x30u +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS1_SHIFT 4 +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS1(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS1_SHIFT))&IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS1_MASK) +#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS2_MASK 0x40u +#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS2_SHIFT 6 +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS2_MASK 0x180u +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS2_SHIFT 7 +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS2(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS2_SHIFT))&IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS2_MASK) +#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS3_MASK 0x200u +#define IOMUXC_GPR_GPR1_GPR_WEIM_ACT_CS3_SHIFT 9 +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS3_MASK 0xC00u +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS3_SHIFT 10 +#define IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS3(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS3_SHIFT))&IOMUXC_GPR_GPR1_GPR_WEIM_ADDRS3_MASK) +#define IOMUXC_GPR_GPR1_GPR_IRQ_MASK 0x1000u +#define IOMUXC_GPR_GPR1_GPR_IRQ_SHIFT 12 +#define IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK 0x2000u +#define IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_SHIFT 13 +#define IOMUXC_GPR_GPR1_GPR_ENET2_TX_CLK_SEL_MASK 0x4000u +#define IOMUXC_GPR_GPR1_GPR_ENET2_TX_CLK_SEL_SHIFT 14 +#define IOMUXC_GPR_GPR1_GPR_ANATOP_TESTMODE_MASK 0x8000u +#define IOMUXC_GPR_GPR1_GPR_ANATOP_TESTMODE_SHIFT 15 +#define IOMUXC_GPR_GPR1_GPR_PAD_ADD_DS_MASK 0x10000u +#define IOMUXC_GPR_GPR1_GPR_PAD_ADD_DS_SHIFT 16 +#define IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK 0x20000u +#define IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_SHIFT 17 +#define IOMUXC_GPR_GPR1_GPR_ENET2_CLK_DIR_MASK 0x40000u +#define IOMUXC_GPR_GPR1_GPR_ENET2_CLK_DIR_SHIFT 18 +#define IOMUXC_GPR_GPR1_GPR_EXC_ERR_RESP_EN_MASK 0x400000u +#define IOMUXC_GPR_GPR1_GPR_EXC_ERR_RESP_EN_SHIFT 22 +#define IOMUXC_GPR_GPR1_GPR_TZASC1_SECURE_BOOT_LOCK_MASK 0x800000u +#define IOMUXC_GPR_GPR1_GPR_TZASC1_SECURE_BOOT_LOCK_SHIFT 23 +#define IOMUXC_GPR_GPR1_GPR_DBG_ACK_MASK 0x30000000u +#define IOMUXC_GPR_GPR1_GPR_DBG_ACK_SHIFT 28 +#define IOMUXC_GPR_GPR1_GPR_DBG_ACK(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR1_GPR_DBG_ACK_SHIFT))&IOMUXC_GPR_GPR1_GPR_DBG_ACK_MASK) +#define IOMUXC_GPR_GPR1_GPR_ENABLE_OCRAM_EPDC_MASK 0x40000000u +#define IOMUXC_GPR_GPR1_GPR_ENABLE_OCRAM_EPDC_SHIFT 30 +/* GPR2 Bit Fields */ +#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_LOWPOWER_MASK 0x1u +#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_LOWPOWER_SHIFT 0 +#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_SD_MASK 0x2u +#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_SD_SHIFT 1 +#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_DS_MASK 0x4u +#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_DS_SHIFT 2 +#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_LS_MASK 0x8u +#define IOMUXC_GPR_GPR2_GPR_MEM_PXP_LS_SHIFT 3 +#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_LOWPOWER_MASK 0x10u +#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_LOWPOWER_SHIFT 4 +#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_SD_MASK 0x20u +#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_SD_SHIFT 5 +#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_DS_MASK 0x40u +#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_DS_SHIFT 6 +#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_LS_MASK 0x80u +#define IOMUXC_GPR_GPR2_GPR_MEM_LCDIF_LS_SHIFT 7 +#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_LOWPOWER_MASK 0x100u +#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_LOWPOWER_SHIFT 8 +#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_SD_MASK 0x200u +#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_SD_SHIFT 9 +#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_DS_MASK 0x400u +#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_DS_SHIFT 10 +#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_LS_MASK 0x800u +#define IOMUXC_GPR_GPR2_GPR_MEM_EPDC_LS_SHIFT 11 +#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_LOWPOWER_MASK 0x1000u +#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_LOWPOWER_SHIFT 12 +#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_SD_MASK 0x2000u +#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_SD_SHIFT 13 +#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_DS_MASK 0x4000u +#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_DS_SHIFT 14 +#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_LS_MASK 0x8000u +#define IOMUXC_GPR_GPR2_GPR_MEM_CPU_LS_SHIFT 15 +#define IOMUXC_GPR_GPR2_GPR_MQS_CLK_DIV_MASK 0xFF0000u +#define IOMUXC_GPR_GPR2_GPR_MQS_CLK_DIV_SHIFT 16 +#define IOMUXC_GPR_GPR2_GPR_MQS_CLK_DIV(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR2_GPR_MQS_CLK_DIV_SHIFT))&IOMUXC_GPR_GPR2_GPR_MQS_CLK_DIV_MASK) +#define IOMUXC_GPR_GPR2_GPR_MQS_SW_RST_MASK 0x1000000u +#define IOMUXC_GPR_GPR2_GPR_MQS_SW_RST_SHIFT 24 +#define IOMUXC_GPR_GPR2_GPR_MQS_EN_MASK 0x2000000u +#define IOMUXC_GPR_GPR2_GPR_MQS_EN_SHIFT 25 +#define IOMUXC_GPR_GPR2_GPR_MQS_OVERSAMPLE_MASK 0x4000000u +#define IOMUXC_GPR_GPR2_GPR_MQS_OVERSAMPLE_SHIFT 26 +#define IOMUXC_GPR_GPR2_GPR_DRAM_RESET_BYPASS_MASK 0x8000000u +#define IOMUXC_GPR_GPR2_GPR_DRAM_RESET_BYPASS_SHIFT 27 +#define IOMUXC_GPR_GPR2_GPR_DRAM_RESET_MASK 0x10000000u +#define IOMUXC_GPR_GPR2_GPR_DRAM_RESET_SHIFT 28 +#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE0_MASK 0x20000000u +#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE0_SHIFT 29 +#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE1_MASK 0x40000000u +#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE1_SHIFT 30 +#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE_BYPASS_MASK 0x80000000u +#define IOMUXC_GPR_GPR2_GPR_DRAM_CKE_BYPASS_SHIFT 31 +/* GPR3 Bit Fields */ +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_READ_DATA_WAIT_EN_MASK 0x1u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_READ_DATA_WAIT_EN_SHIFT 0 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_READ_ADDR_PIPELINE_EN_MASK 0x2u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_READ_ADDR_PIPELINE_EN_SHIFT 1 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_WRITE_DATA_PIPELINE_EN_MASK 0x4u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_WRITE_DATA_PIPELINE_EN_SHIFT 2 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_WRITE_ADDR_PIPELINE_EN_MASK 0x8u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_WRITE_ADDR_PIPELINE_EN_SHIFT 3 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_READ_DATA_WAIT_EN_MASK 0x10u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_READ_DATA_WAIT_EN_SHIFT 4 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_READ_ADDR_PIPELINE_EN_MASK 0x20u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_READ_ADDR_PIPELINE_EN_SHIFT 5 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_WRITE_DATA_PIPELINE_EN_MASK 0x40u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_WRITE_DATA_PIPELINE_EN_SHIFT 6 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_WRITE_ADDR_PIPELINE_EN_MASK 0x80u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_S_WRITE_ADDR_PIPELINE_EN_SHIFT 7 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_READ_DATA_WAIT_EN_MASK 0x100u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_READ_DATA_WAIT_EN_SHIFT 8 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_READ_ADDR_PIPELINE_EN_MASK 0x200u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_READ_ADDR_PIPELINE_EN_SHIFT 9 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_WRITE_DATA_PIPELINE_EN_MASK 0x400u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_WRITE_DATA_PIPELINE_EN_SHIFT 10 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_WRITE_ADDR_PIPELINE_EN_MASK 0x800u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_EPDC_WRITE_ADDR_PIPELINE_EN_SHIFT 11 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_READ_DATA_WAIT_EN_MASK 0x1000u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_READ_DATA_WAIT_EN_SHIFT 12 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_READ_ADDR_PIPELINE_EN_MASK 0x2000u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_READ_ADDR_PIPELINE_EN_SHIFT 13 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_WRITE_DATA_PIPELINE_EN_MASK 0x4000u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_WRITE_DATA_PIPELINE_EN_SHIFT 14 +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_WRITE_ADDR_PIPELINE_EN_MASK 0x8000u +#define IOMUXC_GPR_GPR3_GPR_OCRAM_CTRL_PXP_WRITE_ADDR_PIPELINE_EN_SHIFT 15 +#define IOMUXC_GPR_GPR3_ocram_ctrl_read_data_wait_en_update_pending_MASK 0x10000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_read_data_wait_en_update_pending_SHIFT 16 +#define IOMUXC_GPR_GPR3_ocram_ctrl_read_addr_pipeline_en_update_pending_MASK 0x20000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_read_addr_pipeline_en_update_pending_SHIFT 17 +#define IOMUXC_GPR_GPR3_ocram_ctrl_write_data_pipeline_en_update_pending_MASK 0x40000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_write_data_pipeline_en_update_pending_SHIFT 18 +#define IOMUXC_GPR_GPR3_ocram_ctrl_write_addr_pipeline_en_update_pending_MASK 0x80000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_write_addr_pipeline_en_update_pending_SHIFT 19 +#define IOMUXC_GPR_GPR3_ocram_ctrl_s_read_data_wait_en_update_pending_MASK 0x100000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_s_read_data_wait_en_update_pending_SHIFT 20 +#define IOMUXC_GPR_GPR3_ocram_ctrl_s_read_addr_pipeline_en_update_pending_MASK 0x200000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_s_read_addr_pipeline_en_update_pending_SHIFT 21 +#define IOMUXC_GPR_GPR3_ocram_ctrl_s_write_data_pipeline_en_update_pending_MASK 0x400000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_s_write_data_pipeline_en_update_pending_SHIFT 22 +#define IOMUXC_GPR_GPR3_ocram_ctrl_s_write_addr_pipeline_en_update_pending_MASK 0x800000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_s_write_addr_pipeline_en_update_pending_SHIFT 23 +#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_read_data_wait_en_update_pending_MASK 0x1000000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_read_data_wait_en_update_pending_SHIFT 24 +#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_read_addr_pipeline_en_update_pending_MASK 0x2000000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_read_addr_pipeline_en_update_pending_SHIFT 25 +#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_write_data_pipeline_en_update_pending_MASK 0x4000000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_write_data_pipeline_en_update_pending_SHIFT 26 +#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_write_addr_pipeline_en_update_pending_MASK 0x8000000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_epdc_write_addr_pipeline_en_update_pending_SHIFT 27 +#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_read_data_wait_en_update_pending_MASK 0x10000000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_read_data_wait_en_update_pending_SHIFT 28 +#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_read_addr_pipeline_en_update_pending_MASK 0x20000000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_read_addr_pipeline_en_update_pending_SHIFT 29 +#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_write_data_pipeline_en_update_pending_MASK 0x40000000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_write_data_pipeline_en_update_pending_SHIFT 30 +#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_write_addr_pipeline_en_update_pending_MASK 0x80000000u +#define IOMUXC_GPR_GPR3_ocram_ctrl_pxp_write_addr_pipeline_en_update_pending_SHIFT 31 +/* GPR4 Bit Fields */ +#define IOMUXC_GPR_GPR4_GPR_SDMA_IPG_STOP_MASK 0x1u +#define IOMUXC_GPR_GPR4_GPR_SDMA_IPG_STOP_SHIFT 0 +#define IOMUXC_GPR_GPR4_GPR_CAN1_IPG_STOP_MASK 0x2u +#define IOMUXC_GPR_GPR4_GPR_CAN1_IPG_STOP_SHIFT 1 +#define IOMUXC_GPR_GPR4_GPR_CAN2_IPG_STOP_MASK 0x4u +#define IOMUXC_GPR_GPR4_GPR_CAN2_IPG_STOP_SHIFT 2 +#define IOMUXC_GPR_GPR4_GPR_ENET1_IPG_STOP_MASK 0x8u +#define IOMUXC_GPR_GPR4_GPR_ENET1_IPG_STOP_SHIFT 3 +#define IOMUXC_GPR_GPR4_GPR_ENET2_IPG_STOP_MASK 0x10u +#define IOMUXC_GPR_GPR4_GPR_ENET2_IPG_STOP_SHIFT 4 +#define IOMUXC_GPR_GPR4_GPR_SAI1_IPG_STOP_MASK 0x20u +#define IOMUXC_GPR_GPR4_GPR_SAI1_IPG_STOP_SHIFT 5 +#define IOMUXC_GPR_GPR4_GPR_SAI2_IPG_STOP_MASK 0x40u +#define IOMUXC_GPR_GPR4_GPR_SAI2_IPG_STOP_SHIFT 6 +#define IOMUXC_GPR_GPR4_GPR_SAI3_IPG_STOP_MASK 0x80u +#define IOMUXC_GPR_GPR4_GPR_SAI3_IPG_STOP_SHIFT 7 +#define IOMUXC_GPR_GPR4_sdma_ipg_stop_ack_MASK 0x10000u +#define IOMUXC_GPR_GPR4_sdma_ipg_stop_ack_SHIFT 16 +#define IOMUXC_GPR_GPR4_can1_ipg_stop_ack_MASK 0x20000u +#define IOMUXC_GPR_GPR4_can1_ipg_stop_ack_SHIFT 17 +#define IOMUXC_GPR_GPR4_can2_ipg_stop_ack_MASK 0x40000u +#define IOMUXC_GPR_GPR4_can2_ipg_stop_ack_SHIFT 18 +#define IOMUXC_GPR_GPR4_enet1_ipg_stop_ack_MASK 0x80000u +#define IOMUXC_GPR_GPR4_enet1_ipg_stop_ack_SHIFT 19 +#define IOMUXC_GPR_GPR4_enet2_ipg_stop_ack_MASK 0x100000u +#define IOMUXC_GPR_GPR4_enet2_ipg_stop_ack_SHIFT 20 +#define IOMUXC_GPR_GPR4_sai1_ipg_stop_ack_MASK 0x200000u +#define IOMUXC_GPR_GPR4_sai1_ipg_stop_ack_SHIFT 21 +#define IOMUXC_GPR_GPR4_sai2_ipg_stop_ack_MASK 0x400000u +#define IOMUXC_GPR_GPR4_sai2_ipg_stop_ack_SHIFT 22 +#define IOMUXC_GPR_GPR4_sai3_ipg_stop_ack_MASK 0x800000u +#define IOMUXC_GPR_GPR4_sai3_ipg_stop_ack_SHIFT 23 +#define IOMUXC_GPR_GPR4_cpu_STANDBYWFI_MASK 0x6000000u +#define IOMUXC_GPR_GPR4_cpu_STANDBYWFI_SHIFT 25 +#define IOMUXC_GPR_GPR4_cpu_STANDBYWFI(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR4_cpu_STANDBYWFI_SHIFT))&IOMUXC_GPR_GPR4_cpu_STANDBYWFI_MASK) +#define IOMUXC_GPR_GPR4_cpu_STANDBYWFE_MASK 0x18000000u +#define IOMUXC_GPR_GPR4_cpu_STANDBYWFE_SHIFT 27 +#define IOMUXC_GPR_GPR4_cpu_STANDBYWFE(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR4_cpu_STANDBYWFE_SHIFT))&IOMUXC_GPR_GPR4_cpu_STANDBYWFE_MASK) +/* GPR5 Bit Fields */ +#define IOMUXC_GPR_GPR5_GPR_CSI_MUX_CONTROL_MASK 0x10u +#define IOMUXC_GPR_GPR5_GPR_CSI_MUX_CONTROL_SHIFT 4 +#define IOMUXC_GPR_GPR5_GPR_LVDS_MUX_CONTROL_MASK 0x20u +#define IOMUXC_GPR_GPR5_GPR_LVDS_MUX_CONTROL_SHIFT 5 +#define IOMUXC_GPR_GPR5_GPR_WDOG1_MASK_MASK 0x40u +#define IOMUXC_GPR_GPR5_GPR_WDOG1_MASK_SHIFT 6 +#define IOMUXC_GPR_GPR5_GPR_WDOG2_MASK_MASK 0x80u +#define IOMUXC_GPR_GPR5_GPR_WDOG2_MASK_SHIFT 7 +#define IOMUXC_GPR_GPR5_GPR_LCDIF_HANDSHAKE_MASK 0x1000u +#define IOMUXC_GPR_GPR5_GPR_LCDIF_HANDSHAKE_SHIFT 12 +#define IOMUXC_GPR_GPR5_GPR_PCIE_BTNRST_MASK 0x80000u +#define IOMUXC_GPR_GPR5_GPR_PCIE_BTNRST_SHIFT 19 +#define IOMUXC_GPR_GPR5_GPR_WDOG3_MASK_MASK 0x100000u +#define IOMUXC_GPR_GPR5_GPR_WDOG3_MASK_SHIFT 20 +#define IOMUXC_GPR_GPR5_GPR_LCDIF_CSI_VSYNC_SEL_MASK 0x200000u +#define IOMUXC_GPR_GPR5_GPR_LCDIF_CSI_VSYNC_SEL_SHIFT 21 +#define IOMUXC_GPR_GPR5_GPR_WDOG4_MASK_MASK 0x400000u +#define IOMUXC_GPR_GPR5_GPR_WDOG4_MASK_SHIFT 22 +#define IOMUXC_GPR_GPR5_GPR_GPT4_CAPIN1_SEL_MASK 0x1000000u +#define IOMUXC_GPR_GPR5_GPR_GPT4_CAPIN1_SEL_SHIFT 24 +#define IOMUXC_GPR_GPR5_GPR_GPT4_CAPIN2_SEL_MASK 0x2000000u +#define IOMUXC_GPR_GPR5_GPR_GPT4_CAPIN2_SEL_SHIFT 25 +#define IOMUXC_GPR_GPR5_GPR_ENET1_EVENT3IN_SEL_MASK 0x4000000u +#define IOMUXC_GPR_GPR5_GPR_ENET1_EVENT3IN_SEL_SHIFT 26 +#define IOMUXC_GPR_GPR5_GPR_ENET2_EVENT3IN_SEL_MASK 0x8000000u +#define IOMUXC_GPR_GPR5_GPR_ENET2_EVENT3IN_SEL_SHIFT 27 +#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT1_MASK 0x10000000u +#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT1_SHIFT 28 +#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT2_MASK 0x20000000u +#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT2_SHIFT 29 +#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT3_MASK 0x40000000u +#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT3_SHIFT 30 +#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT4_MASK 0x80000000u +#define IOMUXC_GPR_GPR5_GPR_REF_1M_CLK_GPT4_SHIFT 31 +/* GPR6 Bit Fields */ +#define IOMUXC_GPR_GPR6_GPR_ARCACHE_PXP6_MASK 0x1u +#define IOMUXC_GPR_GPR6_GPR_ARCACHE_PXP6_SHIFT 0 +#define IOMUXC_GPR_GPR6_GPR_AWCACHE_PXP6_MASK 0x2u +#define IOMUXC_GPR_GPR6_GPR_AWCACHE_PXP6_SHIFT 1 +#define IOMUXC_GPR_GPR6_GPR_ARCACHE_PXP6_EN_MASK 0x4u +#define IOMUXC_GPR_GPR6_GPR_ARCACHE_PXP6_EN_SHIFT 2 +#define IOMUXC_GPR_GPR6_GPR_AWCACHE_PXP6_EN_MASK 0x8u +#define IOMUXC_GPR_GPR6_GPR_AWCACHE_PXP6_EN_SHIFT 3 +/* GPR7 Bit Fields */ +#define IOMUXC_GPR_GPR7_GPR_chd1_pwd_ldo_usb_1p0_MASK 0x1u +#define IOMUXC_GPR_GPR7_GPR_chd1_pwd_ldo_usb_1p0_SHIFT 0 +#define IOMUXC_GPR_GPR7_GPR_chd1_lowpwr_ldo_usb_1p0_MASK 0x2u +#define IOMUXC_GPR_GPR7_GPR_chd1_lowpwr_ldo_usb_1p0_SHIFT 1 +#define IOMUXC_GPR_GPR7_GPR_chd1_en_ilimit_ldo_usb_1p0_MASK 0x4u +#define IOMUXC_GPR_GPR7_GPR_chd1_en_ilimit_ldo_usb_1p0_SHIFT 2 +#define IOMUXC_GPR_GPR7_GPR_chd1_en_pwrupload_ldo_usb_1p0_MASK 0x8u +#define IOMUXC_GPR_GPR7_GPR_chd1_en_pwrupload_ldo_usb_1p0_SHIFT 3 +#define IOMUXC_GPR_GPR7_GPR_chd1_chrg_det_test_MASK 0x30u +#define IOMUXC_GPR_GPR7_GPR_chd1_chrg_det_test_SHIFT 4 +#define IOMUXC_GPR_GPR7_GPR_chd1_chrg_det_test(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR7_GPR_chd1_chrg_det_test_SHIFT))&IOMUXC_GPR_GPR7_GPR_chd1_chrg_det_test_MASK) +#define IOMUXC_GPR_GPR7_GPR_chd2_pwd_ldo_usb_1p0_MASK 0x40u +#define IOMUXC_GPR_GPR7_GPR_chd2_pwd_ldo_usb_1p0_SHIFT 6 +#define IOMUXC_GPR_GPR7_GPR_chd2_lowpwr_ldo_usb_1p0_MASK 0x80u +#define IOMUXC_GPR_GPR7_GPR_chd2_lowpwr_ldo_usb_1p0_SHIFT 7 +#define IOMUXC_GPR_GPR7_GPR_chd2_en_ilimit_ldo_usb_1p0_MASK 0x100u +#define IOMUXC_GPR_GPR7_GPR_chd2_en_ilimit_ldo_usb_1p0_SHIFT 8 +#define IOMUXC_GPR_GPR7_GPR_chd2_en_pwrupload_ldo_usb_1p0_MASK 0x200u +#define IOMUXC_GPR_GPR7_GPR_chd2_en_pwrupload_ldo_usb_1p0_SHIFT 9 +#define IOMUXC_GPR_GPR7_GPR_chd2_chrg_det_test_MASK 0xC00u +#define IOMUXC_GPR_GPR7_GPR_chd2_chrg_det_test_SHIFT 10 +#define IOMUXC_GPR_GPR7_GPR_chd2_chrg_det_test(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR7_GPR_chd2_chrg_det_test_SHIFT))&IOMUXC_GPR_GPR7_GPR_chd2_chrg_det_test_MASK) +#define IOMUXC_GPR_GPR7_GPR_pcie_clk_rst_fix_lnkrst_disable_MASK 0x1000u +#define IOMUXC_GPR_GPR7_GPR_pcie_clk_rst_fix_lnkrst_disable_SHIFT 12 +#define IOMUXC_GPR_GPR7_GPR_pcie_clk_rst_fix_perst_disable_MASK 0x2000u +#define IOMUXC_GPR_GPR7_GPR_pcie_clk_rst_fix_perst_disable_SHIFT 13 +/* GPR8 Bit Fields */ +#define IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up_MASK 0xF8u +#define IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up_SHIFT 3 +#define IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up_SHIFT))&IOMUXC_GPR_GPR8_ddr_phy_ctrl_wake_up_MASK) +#define IOMUXC_GPR_GPR8_ddr_phy_dfi_init_start_MASK 0x100u +#define IOMUXC_GPR_GPR8_ddr_phy_dfi_init_start_SHIFT 8 +/* GPR9 Bit Fields */ +#define IOMUXC_GPR_GPR9_GPR_TZASC1_MUX_CONTROL_MASK 0x1u +#define IOMUXC_GPR_GPR9_GPR_TZASC1_MUX_CONTROL_SHIFT 0 +#define IOMUXC_GPR_GPR9_ddr_phy_ctrl_pd_MASK 0x3Eu +#define IOMUXC_GPR_GPR9_ddr_phy_ctrl_pd_SHIFT 1 +#define IOMUXC_GPR_GPR9_ddr_phy_ctrl_pd(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR9_ddr_phy_ctrl_pd_SHIFT))&IOMUXC_GPR_GPR9_ddr_phy_ctrl_pd_MASK) +/* GPR10 Bit Fields */ +#define IOMUXC_GPR_GPR10_GPR0_BF0_MASK 0x1u +#define IOMUXC_GPR_GPR10_GPR0_BF0_SHIFT 0 +#define IOMUXC_GPR_GPR10_GPR_DBG_EN_MASK 0x2u +#define IOMUXC_GPR_GPR10_GPR_DBG_EN_SHIFT 1 +#define IOMUXC_GPR_GPR10_GPR_SEC_ERR_RESP_EN_MASK 0x4u +#define IOMUXC_GPR_GPR10_GPR_SEC_ERR_RESP_EN_SHIFT 2 +#define IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION0_MASK 0x8u +#define IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION0_SHIFT 3 +#define IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION1_MASK 0x3F0u +#define IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION1_SHIFT 4 +#define IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION1(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION1_SHIFT))&IOMUXC_GPR_GPR10_GPR_OCRAM_CTRL_EPDC_OCRAM_TZ_SECURE_REGION1_MASK) +/* GPR11 Bit Fields */ +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION0_MASK 0x1u +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION0_SHIFT 0 +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION1_MASK 0x3Eu +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION1_SHIFT 1 +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION1(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION1_SHIFT))&IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_OCRAM_TZ_SECURE_REGION1_MASK) +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION0_MASK 0x40u +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION0_SHIFT 6 +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION1_MASK 0x380u +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION1_SHIFT 7 +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION1(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION1_SHIFT))&IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_PXP_OCRAM_TZ_SECURE_REGION1_MASK) +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION0_MASK 0x400u +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION0_SHIFT 10 +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION1_MASK 0x3800u +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION1_SHIFT 11 +#define IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION1(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION1_SHIFT))&IOMUXC_GPR_GPR11_GPR_OCRAM_CTRL_S_OCRAM_TZ_SECURE_REGION1_MASK) +/* GPR12 Bit Fields */ +#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_TRSV_REG_RST_CH0_MASK 0x1u +#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_TRSV_REG_RST_CH0_SHIFT 0 +#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_TRSV_RST_CH0_MASK 0x2u +#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_TRSV_RST_CH0_SHIFT 1 +#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_SSC_EN_MASK 0x8u +#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_SSC_EN_SHIFT 3 +#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_CMN_REG_RST_MASK 0x10u +#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_CMN_REG_RST_SHIFT 4 +#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_REFCLK_SEL_MASK 0x20u +#define IOMUXC_GPR_GPR12_GPR_PCIE_PHY_REFCLK_SEL_SHIFT 5 +#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DEVICE_TYPE_MASK 0xF000u +#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DEVICE_TYPE_SHIFT 12 +#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DEVICE_TYPE(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DEVICE_TYPE_SHIFT))&IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DEVICE_TYPE_MASK) +#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_STATUS_BUS_SELECT_MASK 0x1E0000u +#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_STATUS_BUS_SELECT_SHIFT 17 +#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_STATUS_BUS_SELECT(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_STATUS_BUS_SELECT_SHIFT))&IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_STATUS_BUS_SELECT_MASK) +#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_CTRL_BUS_MASK 0xE00000u +#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_CTRL_BUS_SHIFT 21 +#define IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_CTRL_BUS(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_CTRL_BUS_SHIFT))&IOMUXC_GPR_GPR12_GPR_PCIE_CTRL_DIAG_CTRL_BUS_MASK) +/* GPR13 Bit Fields */ +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_USDHC_MASK 0x1u +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_USDHC_SHIFT 0 +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_USDHC_MASK 0x2u +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_USDHC_SHIFT 1 +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PXP_MASK 0x4u +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PXP_SHIFT 2 +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PXP_MASK 0x8u +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PXP_SHIFT 3 +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PCIE_MASK 0x10u +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PCIE_SHIFT 4 +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PCIE_MASK 0x20u +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PCIE_SHIFT 5 +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_LCDIF_MASK 0x40u +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_LCDIF_SHIFT 6 +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_EPDC_MASK 0x80u +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_EPDC_SHIFT 7 +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PXP_EN_MASK 0x100u +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PXP_EN_SHIFT 8 +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PXP_EN_MASK 0x200u +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PXP_EN_SHIFT 9 +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PCIE_EN_MASK 0x400u +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_PCIE_EN_SHIFT 10 +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PCIE_EN_MASK 0x800u +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_PCIE_EN_SHIFT 11 +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_LCDIF_EN_MASK 0x1000u +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_LCDIF_EN_SHIFT 12 +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_EPDC_EN_MASK 0x2000u +#define IOMUXC_GPR_GPR13_GPR_ARCACHE_EPDC_EN_SHIFT 13 +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_EPDC_MASK 0x4000u +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_EPDC_SHIFT 14 +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_EPDC_EN_MASK 0x8000u +#define IOMUXC_GPR_GPR13_GPR_AWCACHE_EPDC_EN_SHIFT 15 +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_AFC_CODE_OUT_CH0_MASK 0xFF0000u +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_AFC_CODE_OUT_CH0_SHIFT 16 +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_AFC_CODE_OUT_CH0(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR13_GPR_PCIE_PHY_AFC_CODE_OUT_CH0_SHIFT))&IOMUXC_GPR_GPR13_GPR_PCIE_PHY_AFC_CODE_OUT_CH0_MASK) +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_VCO_BAND_MASK 0xF000000u +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_VCO_BAND_SHIFT 24 +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_VCO_BAND(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR13_GPR_PCIE_PHY_VCO_BAND_SHIFT))&IOMUXC_GPR_GPR13_GPR_PCIE_PHY_VCO_BAND_MASK) +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PMA_CDR_LOCKED_CH0_MASK 0x10000000u +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PMA_CDR_LOCKED_CH0_SHIFT 28 +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PMA_RX_PRESENT_CH0_MASK 0x20000000u +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PMA_RX_PRESENT_CH0_SHIFT 29 +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_CDR_VCO_MON_CH0_MASK 0x40000000u +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_CDR_VCO_MON_CH0_SHIFT 30 +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PCS_REFCLK_DISABLE_MASK 0x80000000u +#define IOMUXC_GPR_GPR13_GPR_PCIE_PHY_PCS_REFCLK_DISABLE_SHIFT 31 +/* GPR14 Bit Fields */ +#define IOMUXC_GPR_GPR14_GPR_SIM1_SIMV2_EMV_SEL_MASK 0x1u +#define IOMUXC_GPR_GPR14_GPR_SIM1_SIMV2_EMV_SEL_SHIFT 0 +#define IOMUXC_GPR_GPR14_GPR_SIM2_SIMV2_EMV_SEL_MASK 0x2u +#define IOMUXC_GPR_GPR14_GPR_SIM2_SIMV2_EMV_SEL_SHIFT 1 +/* GPR15 Bit Fields */ +#define IOMUXC_GPR_GPR15_GPR_LVDS_I_VBLK_FLAG_MASK 0x1u +#define IOMUXC_GPR_GPR15_GPR_LVDS_I_VBLK_FLAG_SHIFT 0 +#define IOMUXC_GPR_GPR15_GPR_LVDS_I_AUTO_SEL_MASK 0x2u +#define IOMUXC_GPR_GPR15_GPR_LVDS_I_AUTO_SEL_SHIFT 1 +#define IOMUXC_GPR_GPR15_GPR_LVDS_I_DESKEW_CNT_SET_MASK 0x3FFCu +#define IOMUXC_GPR_GPR15_GPR_LVDS_I_DESKEW_CNT_SET_SHIFT 2 +#define IOMUXC_GPR_GPR15_GPR_LVDS_I_DESKEW_CNT_SET(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR15_GPR_LVDS_I_DESKEW_CNT_SET_SHIFT))&IOMUXC_GPR_GPR15_GPR_LVDS_I_DESKEW_CNT_SET_MASK) +#define IOMUXC_GPR_GPR15_GPR_LVDS_I_LOCK_PPM_SET_MASK 0x3F0000u +#define IOMUXC_GPR_GPR15_GPR_LVDS_I_LOCK_PPM_SET_SHIFT 16 +#define IOMUXC_GPR_GPR15_GPR_LVDS_I_LOCK_PPM_SET(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR15_GPR_LVDS_I_LOCK_PPM_SET_SHIFT))&IOMUXC_GPR_GPR15_GPR_LVDS_I_LOCK_PPM_SET_MASK) +/* GPR16 Bit Fields */ +#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_REG_CUR_MASK 0x3u +#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_REG_CUR_SHIFT 0 +#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_REG_CUR(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_REG_CUR_SHIFT))&IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_REG_CUR_MASK) +#define IOMUXC_GPR_GPR16_GPR_LVDS_SEL_DATABF_MASK 0x4u +#define IOMUXC_GPR_GPR16_GPR_LVDS_SEL_DATABF_SHIFT 2 +#define IOMUXC_GPR_GPR16_GPR_LVDS_CNTB_TDLY_MASK 0x8u +#define IOMUXC_GPR_GPR16_GPR_LVDS_CNTB_TDLY_SHIFT 3 +#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_EN_H_MASK 0x10u +#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEW_EN_H_SHIFT 4 +#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEWINI_MASK 0x20u +#define IOMUXC_GPR_GPR16_GPR_LVDS_SKEWINI_SHIFT 5 +#define IOMUXC_GPR_GPR16_GPR_LVDS_SK_BIAS_MASK 0x3C0u +#define IOMUXC_GPR_GPR16_GPR_LVDS_SK_BIAS_SHIFT 6 +#define IOMUXC_GPR_GPR16_GPR_LVDS_SK_BIAS(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR16_GPR_LVDS_SK_BIAS_SHIFT))&IOMUXC_GPR_GPR16_GPR_LVDS_SK_BIAS_MASK) +#define IOMUXC_GPR_GPR16_GPR_LVDS_AUTO_DSK_SEL_MASK 0x400u +#define IOMUXC_GPR_GPR16_GPR_LVDS_AUTO_DSK_SEL_SHIFT 10 +#define IOMUXC_GPR_GPR16_GPR_LVDS_LOCK_CNT_MASK 0x800u +#define IOMUXC_GPR_GPR16_GPR_LVDS_LOCK_CNT_SHIFT 11 +#define IOMUXC_GPR_GPR16_GPR_LVDS_OUTCON_MASK 0x1000u +#define IOMUXC_GPR_GPR16_GPR_LVDS_OUTCON_SHIFT 12 +#define IOMUXC_GPR_GPR16_GPR_LVDS_FC_CODE_MASK 0xE000u +#define IOMUXC_GPR_GPR16_GPR_LVDS_FC_CODE_SHIFT 13 +#define IOMUXC_GPR_GPR16_GPR_LVDS_FC_CODE(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR16_GPR_LVDS_FC_CODE_SHIFT))&IOMUXC_GPR_GPR16_GPR_LVDS_FC_CODE_MASK) +#define IOMUXC_GPR_GPR16_GPR_LVDS_SRC_TRH_MASK 0x10000u +#define IOMUXC_GPR_GPR16_GPR_LVDS_SRC_TRH_SHIFT 16 +#define IOMUXC_GPR_GPR16_GPR_LVDS_VOD_HIGH_S_MASK 0x20000u +#define IOMUXC_GPR_GPR16_GPR_LVDS_VOD_HIGH_S_SHIFT 17 +#define IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_CNT_MASK 0x180000u +#define IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_CNT_SHIFT 19 +#define IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_CNT(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_CNT_SHIFT))&IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_CNT_MASK) +#define IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_MODE_SEL_MASK 0x200000u +#define IOMUXC_GPR_GPR16_GPR_LVDS_CNNCT_MODE_SEL_SHIFT 21 +#define IOMUXC_GPR_GPR16_GPR_LVDS_FLT_CNT_MASK 0x400000u +#define IOMUXC_GPR_GPR16_GPR_LVDS_FLT_CNT_SHIFT 22 +#define IOMUXC_GPR_GPR16_GPR_LVDS_VOD_ONLY_CNT_MASK 0x800000u +#define IOMUXC_GPR_GPR16_GPR_LVDS_VOD_ONLY_CNT_SHIFT 23 +/* GPR17 Bit Fields */ +#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_PEN_H_MASK 0xFFu +#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_PEN_H_SHIFT 0 +#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_PEN_H(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR17_GPR_LVDS_CNT_PEN_H_SHIFT))&IOMUXC_GPR_GPR17_GPR_LVDS_CNT_PEN_H_MASK) +#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_VOD_H_MASK 0xFF00u +#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_VOD_H_SHIFT 8 +#define IOMUXC_GPR_GPR17_GPR_LVDS_CNT_VOD_H(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR17_GPR_LVDS_CNT_VOD_H_SHIFT))&IOMUXC_GPR_GPR17_GPR_LVDS_CNT_VOD_H_MASK) +/* GPR18 Bit Fields */ +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CH_SEL_MASK 0x7u +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CH_SEL_SHIFT 0 +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CH_SEL(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CH_SEL_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CH_SEL_MASK) +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_DATA_INV_MASK 0x18u +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_DATA_INV_SHIFT 3 +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_DATA_INV(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_DATA_INV_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_DATA_INV_MASK) +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CLK_INV_MASK 0x60u +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CLK_INV_SHIFT 5 +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CLK_INV(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CLK_INV_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_CLK_INV_MASK) +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_SKEW_CTRL_MASK 0x3F00u +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_SKEW_CTRL_SHIFT 8 +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_SKEW_CTRL(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_SKEW_CTRL_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_SKEW_CTRL_MASK) +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_FORCE_ERROR_MASK 0x4000u +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_FORCE_ERROR_SHIFT 14 +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_USER_PATTERN_MASK 0x7F0000u +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_USER_PATTERN_SHIFT 16 +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_USER_PATTERN(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_USER_PATTERN_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_USER_PATTERN_MASK) +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_PAT_SEL_MASK 0x3000000u +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_PAT_SEL_SHIFT 24 +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_PAT_SEL(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_PAT_SEL_SHIFT))&IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_PAT_SEL_MASK) +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_EN_MASK 0x4000000u +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_EN_SHIFT 26 +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_RESETB_MASK 0x8000000u +#define IOMUXC_GPR_GPR18_GPR_LVDS_I_BIST_RESETB_SHIFT 27 +#define IOMUXC_GPR_GPR18_GPR_LVDS_DLYS_BST_MASK 0x10000000u +#define IOMUXC_GPR_GPR18_GPR_LVDS_DLYS_BST_SHIFT 28 +#define IOMUXC_GPR_GPR18_GPR_LVDS_SKINI_BST_MASK 0x20000000u +#define IOMUXC_GPR_GPR18_GPR_LVDS_SKINI_BST_SHIFT 29 +/* GPR19 Bit Fields */ +#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_STATUS_MASK 0x1u +#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_STATUS_SHIFT 0 +#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_ERR_COUNT_MASK 0xFF00u +#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_ERR_COUNT_SHIFT 8 +#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_ERR_COUNT(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_ERR_COUNT_SHIFT))&IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_ERR_COUNT_MASK) +#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_SYNC_MASK 0x10000u +#define IOMUXC_GPR_GPR19_GPR_LVDS_O_BIST_SYNC_SHIFT 16 +#define IOMUXC_GPR_GPR19_GPR_LVDS_MON_FOR_CNNCT_MASK 0x20000u +#define IOMUXC_GPR_GPR19_GPR_LVDS_MON_FOR_CNNCT_SHIFT 17 +/* GPR20 Bit Fields */ +#define IOMUXC_GPR_GPR20_GPR_LVDS_P_MASK 0x3Fu +#define IOMUXC_GPR_GPR20_GPR_LVDS_P_SHIFT 0 +#define IOMUXC_GPR_GPR20_GPR_LVDS_P(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR20_GPR_LVDS_P_SHIFT))&IOMUXC_GPR_GPR20_GPR_LVDS_P_MASK) +#define IOMUXC_GPR_GPR20_GPR_LVDS_M_MASK 0x3F00u +#define IOMUXC_GPR_GPR20_GPR_LVDS_M_SHIFT 8 +#define IOMUXC_GPR_GPR20_GPR_LVDS_M(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR20_GPR_LVDS_M_SHIFT))&IOMUXC_GPR_GPR20_GPR_LVDS_M_MASK) +#define IOMUXC_GPR_GPR20_GPR_LVDS_S_MASK 0x30000u +#define IOMUXC_GPR_GPR20_GPR_LVDS_S_SHIFT 16 +#define IOMUXC_GPR_GPR20_GPR_LVDS_S(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR20_GPR_LVDS_S_SHIFT))&IOMUXC_GPR_GPR20_GPR_LVDS_S_MASK) +#define IOMUXC_GPR_GPR20_GPR_LVDS_VSEL_MASK 0x1000000u +#define IOMUXC_GPR_GPR20_GPR_LVDS_VSEL_SHIFT 24 +#define IOMUXC_GPR_GPR20_GPR_LVDS_CK_POL_SEL_MASK 0x2000000u +#define IOMUXC_GPR_GPR20_GPR_LVDS_CK_POL_SEL_SHIFT 25 +#define IOMUXC_GPR_GPR20_GPR_LVDS_I_TX2801X_DUMMY_MASK 0x38000000u +#define IOMUXC_GPR_GPR20_GPR_LVDS_I_TX2801X_DUMMY_SHIFT 27 +#define IOMUXC_GPR_GPR20_GPR_LVDS_I_TX2801X_DUMMY(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR20_GPR_LVDS_I_TX2801X_DUMMY_SHIFT))&IOMUXC_GPR_GPR20_GPR_LVDS_I_TX2801X_DUMMY_MASK) +/* GPR21 Bit Fields */ +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC0_MASK 0x7u +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC0_SHIFT 0 +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC0(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKC0_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKC0_MASK) +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC1_MASK 0x38u +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC1_SHIFT 3 +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC1(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKC1_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKC1_MASK) +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC2_MASK 0x1C0u +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC2_SHIFT 6 +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC2(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKC2_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKC2_MASK) +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKCCK_MASK 0xE00u +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKCCK_SHIFT 9 +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKCCK(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKCCK_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKCCK_MASK) +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC3_MASK 0x7000u +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC3_SHIFT 12 +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC3(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKC3_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKC3_MASK) +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC4_MASK 0x38000u +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC4_SHIFT 15 +#define IOMUXC_GPR_GPR21_GPR_LVDS_SKC4(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR21_GPR_LVDS_SKC4_SHIFT))&IOMUXC_GPR_GPR21_GPR_LVDS_SKC4_MASK) +#define IOMUXC_GPR_GPR21_SJC_BYPASS_CJTAGC_MASK 0x40000u +#define IOMUXC_GPR_GPR21_SJC_BYPASS_CJTAGC_SHIFT 18 +#define IOMUXC_GPR_GPR21_DAP_BYPASS_CJTAGC_MASK 0x80000u +#define IOMUXC_GPR_GPR21_DAP_BYPASS_CJTAGC_SHIFT 19 +/* GPR22 Bit Fields */ +#define IOMUXC_GPR_GPR22_ddrc_mrr_data_out_MASK 0xFF0000u +#define IOMUXC_GPR_GPR22_ddrc_mrr_data_out_SHIFT 16 +#define IOMUXC_GPR_GPR22_ddrc_mrr_data_out(x) (((uint32_t)(((uint32_t)(x))<<IOMUXC_GPR_GPR22_ddrc_mrr_data_out_SHIFT))&IOMUXC_GPR_GPR22_ddrc_mrr_data_out_MASK) +#define IOMUXC_GPR_GPR22_ddrc_mrr_valid_out_MASK 0x1000000u +#define IOMUXC_GPR_GPR22_ddrc_mrr_valid_out_SHIFT 24 +#define IOMUXC_GPR_GPR22_ddr_phy_dfi_init_complete_MASK 0x2000000u +#define IOMUXC_GPR_GPR22_ddr_phy_dfi_init_complete_SHIFT 25 +#define IOMUXC_GPR_GPR22_GPR_chd2_dvdd_usb_stable_MASK 0x4000000u +#define IOMUXC_GPR_GPR22_GPR_chd2_dvdd_usb_stable_SHIFT 26 +#define IOMUXC_GPR_GPR22_aux_chrg_det_2_usb_iso_enable_1_MASK 0x8000000u +#define IOMUXC_GPR_GPR22_aux_chrg_det_2_usb_iso_enable_1_SHIFT 27 +#define IOMUXC_GPR_GPR22_GPR_chd1_dvdd_usb_stable_MASK 0x10000000u +#define IOMUXC_GPR_GPR22_GPR_chd1_dvdd_usb_stable_SHIFT 28 +#define IOMUXC_GPR_GPR22_aux_chrg_det_1_usb_iso_enable_1_MASK 0x20000000u +#define IOMUXC_GPR_GPR22_aux_chrg_det_1_usb_iso_enable_1_SHIFT 29 +#define IOMUXC_GPR_GPR22_GPR_PCIE_PHY_PLL_LOCKED_MASK 0x80000000u +#define IOMUXC_GPR_GPR22_GPR_PCIE_PHY_PLL_LOCKED_SHIFT 31 + +#define IMX7D_GPR5_CSI1_MUX_CTRL_MASK (0x1 << 4) +#define IMX7D_GPR5_CSI1_MUX_CTRL_PARALLEL_CSI (0x0 << 4) +#define IMX7D_GPR5_CSI1_MUX_CTRL_MIPI_CSI (0x1 << 4) + +struct iomuxc { + u32 gpr[23]; + /* mux and pad registers */ +}; + +struct iomuxc_gpr_base_regs { + u32 gpr[23]; /* 0x000 */ +}; + +/* ECSPI registers */ +struct cspi_regs { + u32 rxdata; + u32 txdata; + u32 ctrl; + u32 cfg; + u32 intr; + u32 dma; + u32 stat; + u32 period; +}; + +/* + * CSPI register definitions + */ +#define MXC_ECSPI +#define MXC_CSPICTRL_EN (1 << 0) +#define MXC_CSPICTRL_MODE (1 << 1) +#define MXC_CSPICTRL_XCH (1 << 2) +#define MXC_CSPICTRL_MODE_MASK (0xf << 4) +#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12) +#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20) +#define MXC_CSPICTRL_PREDIV(x) (((x) & 0xF) << 12) +#define MXC_CSPICTRL_POSTDIV(x) (((x) & 0xF) << 8) +#define MXC_CSPICTRL_SELCHAN(x) (((x) & 0x3) << 18) +#define MXC_CSPICTRL_MAXBITS 0xfff +#define MXC_CSPICTRL_TC (1 << 7) +#define MXC_CSPICTRL_RXOVF (1 << 6) +#define MXC_CSPIPERIOD_32KHZ (1 << 15) +#define MAX_SPI_BYTES 32 + +/* Bit position inside CTRL register to be associated with SS */ +#define MXC_CSPICTRL_CHAN 18 + +/* Bit position inside CON register to be associated with SS */ +#define MXC_CSPICON_PHA 0 /* SCLK phase control */ +#define MXC_CSPICON_POL 4 /* SCLK polarity */ +#define MXC_CSPICON_SSPOL 12 /* SS polarity */ +#define MXC_CSPICON_CTL 20 /* inactive state of SCLK */ + +#define MXC_SPI_BASE_ADDRESSES \ + ECSPI1_BASE_ADDR, \ + ECSPI2_BASE_ADDR, \ + ECSPI3_BASE_ADDR, \ + ECSPI4_BASE_ADDR + +struct ocotp_regs { + u32 ctrl; + u32 ctrl_set; + u32 ctrl_clr; + u32 ctrl_tog; + u32 timing; + u32 rsvd0[3]; + u32 data0; + u32 rsvd1[3]; + u32 data1; + u32 rsvd2[3]; + u32 data2; + u32 rsvd3[3]; + u32 data3; + u32 rsvd4[3]; + u32 read_ctrl; + u32 rsvd5[3]; + u32 read_fuse_data0; + u32 rsvd6[3]; + u32 read_fuse_data1; + u32 rsvd7[3]; + u32 read_fuse_data2; + u32 rsvd8[3]; + u32 read_fuse_data3; + u32 rsvd9[3]; + u32 sw_sticky; + u32 rsvd10[3]; + u32 scs; + u32 scs_set; + u32 scs_clr; + u32 scs_tog; + u32 crc_addr; + u32 rsvd11[3]; + u32 crc_value; + u32 rsvd12[3]; + u32 version; + u32 rsvd13[0xc3]; + + struct fuse_bank { /* offset 0x400 */ + u32 fuse_regs[0x10]; + } bank[16]; +}; + +struct fuse_bank0_regs { + u32 lock; + u32 rsvd0[3]; + u32 tester0; + u32 rsvd1[3]; + u32 tester1; + u32 rsvd2[3]; + u32 tester2; + u32 rsvd3[3]; +}; + +struct fuse_bank1_regs { + u32 tester3; + u32 rsvd0[3]; + u32 tester4; + u32 rsvd1[3]; + u32 tester5; + u32 rsvd2[3]; + u32 cfg0; + u32 rsvd3[3]; +}; + +struct fuse_bank2_regs { + u32 cfg1; + u32 rsvd0[3]; + u32 cfg2; + u32 rsvd1[3]; + u32 cfg3; + u32 rsvd2[3]; + u32 cfg4; + u32 rsvd3[3]; +}; + +struct fuse_bank3_regs { + u32 mem_trim0; + u32 rsvd0[3]; + u32 mem_trim1; + u32 rsvd1[3]; + u32 ana0; + u32 rsvd2[3]; + u32 ana1; + u32 rsvd3[3]; +}; + +struct fuse_bank8_regs { + u32 sjc_resp_low; + u32 rsvd0[3]; + u32 sjc_resp_high; + u32 rsvd1[3]; + u32 usb_id; + u32 rsvd2[3]; + u32 field_return; + u32 rsvd3[3]; +}; + +struct fuse_bank9_regs { + u32 mac_addr0; + u32 rsvd0[3]; + u32 mac_addr1; + u32 rsvd1[3]; + u32 mac_addr2; + u32 rsvd2[7]; +}; + +struct aipstz_regs { + u32 mprot0; + u32 mprot1; + u32 rsvd[0xe]; + u32 opacr0; + u32 opacr1; + u32 opacr2; + u32 opacr3; + u32 opacr4; +}; + +struct wdog_regs { + u16 wcr; /* Control */ + u16 wsr; /* Service */ + u16 wrsr; /* Reset Status */ + u16 wicr; /* Interrupt Control */ + u16 wmcr; /* Miscellaneous Control */ +}; + +struct dbg_monitor_regs { + u32 ctrl[4]; /* Control */ + u32 master_en[4]; /* Master enable */ + u32 irq[4]; /* IRQ */ + u32 trap_addr_low[4]; /* Trap address low */ + u32 trap_addr_high[4]; /* Trap address high */ + u32 trap_id[4]; /* Trap ID */ + u32 snvs_addr[4]; /* SNVS address */ + u32 snvs_data[4]; /* SNVS data */ + u32 snvs_info[4]; /* SNVS info */ + u32 version[4]; /* Version */ +}; + +struct rdc_regs { + u32 vir; /* Version information */ + u32 reserved1[8]; + u32 stat; /* Status */ + u32 intctrl; /* Interrupt and Control */ + u32 intstat; /* Interrupt Status */ + u32 reserved2[116]; + u32 mda[27]; /* Master Domain Assignment */ + u32 reserved3[101]; + u32 pdap[118]; /* Peripheral Domain Access Permissions */ + u32 reserved4[138]; + struct { + u32 mrsa; /* Memory Region Start Address */ + u32 mrea; /* Memory Region End Address */ + u32 mrc; /* Memory Region Control */ + u32 mrvs; /* Memory Region Violation Status */ + } mem_region[52]; +}; + +struct rdc_sema_regs { + u8 gate[64]; /* Gate */ + u16 rstgt; /* Reset Gate */ +}; + +/* eLCDIF controller registers */ +struct mxs_lcdif_regs { + u32 hw_lcdif_ctrl; /* 0x00 */ + u32 hw_lcdif_ctrl_set; + u32 hw_lcdif_ctrl_clr; + u32 hw_lcdif_ctrl_tog; + u32 hw_lcdif_ctrl1; /* 0x10 */ + u32 hw_lcdif_ctrl1_set; + u32 hw_lcdif_ctrl1_clr; + u32 hw_lcdif_ctrl1_tog; + u32 hw_lcdif_ctrl2; /* 0x20 */ + u32 hw_lcdif_ctrl2_set; + u32 hw_lcdif_ctrl2_clr; + u32 hw_lcdif_ctrl2_tog; + u32 hw_lcdif_transfer_count; /* 0x30 */ + u32 reserved1[3]; + u32 hw_lcdif_cur_buf; /* 0x40 */ + u32 reserved2[3]; + u32 hw_lcdif_next_buf; /* 0x50 */ + u32 reserved3[3]; + u32 hw_lcdif_timing; /* 0x60 */ + u32 reserved4[3]; + u32 hw_lcdif_vdctrl0; /* 0x70 */ + u32 hw_lcdif_vdctrl0_set; + u32 hw_lcdif_vdctrl0_clr; + u32 hw_lcdif_vdctrl0_tog; + u32 hw_lcdif_vdctrl1; /* 0x80 */ + u32 reserved5[3]; + u32 hw_lcdif_vdctrl2; /* 0x90 */ + u32 reserved6[3]; + u32 hw_lcdif_vdctrl3; /* 0xa0 */ + u32 reserved7[3]; + u32 hw_lcdif_vdctrl4; /* 0xb0 */ + u32 reserved8[3]; + u32 hw_lcdif_dvictrl0; /* 0xc0 */ + u32 reserved9[3]; + u32 hw_lcdif_dvictrl1; /* 0xd0 */ + u32 reserved10[3]; + u32 hw_lcdif_dvictrl2; /* 0xe0 */ + u32 reserved11[3]; + u32 hw_lcdif_dvictrl3; /* 0xf0 */ + u32 reserved12[3]; + u32 hw_lcdif_dvictrl4; /* 0x100 */ + u32 reserved13[3]; + u32 hw_lcdif_csc_coeffctrl0; /* 0x110 */ + u32 reserved14[3]; + u32 hw_lcdif_csc_coeffctrl1; /* 0x120 */ + u32 reserved15[3]; + u32 hw_lcdif_csc_coeffctrl2; /* 0x130 */ + u32 reserved16[3]; + u32 hw_lcdif_csc_coeffctrl3; /* 0x140 */ + u32 reserved17[3]; + u32 hw_lcdif_csc_coeffctrl4; /* 0x150 */ + u32 reserved18[3]; + u32 hw_lcdif_csc_offset; /* 0x160 */ + u32 reserved19[3]; + u32 hw_lcdif_csc_limit; /* 0x170 */ + u32 reserved20[3]; + u32 hw_lcdif_data; /* 0x180 */ + u32 reserved21[3]; + u32 hw_lcdif_bm_error_stat; /* 0x190 */ + u32 reserved22[3]; + u32 hw_lcdif_crc_stat; /* 0x1a0 */ + u32 reserved23[3]; + u32 hw_lcdif_lcdif_stat; /* 0x1b0 */ + u32 reserved24[3]; + u32 hw_lcdif_version; /* 0x1c0 */ + u32 reserved25[3]; + u32 hw_lcdif_debug0; /* 0x1d0 */ + u32 reserved26[3]; + u32 hw_lcdif_debug1; /* 0x1e0 */ + u32 reserved27[3]; + u32 hw_lcdif_debug2; /* 0x1f0 */ + u32 reserved28[3]; + u32 hw_lcdif_thres; /* 0x200 */ + u32 reserved29[3]; + u32 hw_lcdif_as_ctrl; /* 0x210 */ + u32 reserved30[3]; + u32 hw_lcdif_as_buf; /* 0x220 */ + u32 reserved31[3]; + u32 hw_lcdif_as_next_buf; /* 0x230 */ + u32 reserved32[3]; + u32 hw_lcdif_as_clrkeylow; /* 0x240 */ + u32 reserved33[3]; + u32 hw_lcdif_as_clrkeyhigh; /* 0x250 */ + u32 reserved34[3]; + u32 hw_lcdif_as_sync_delay; /* 0x260 */ + u32 reserved35[3]; + u32 hw_lcdif_as_debug3; /* 0x270 */ + u32 reserved36[3]; + u32 hw_lcdif_as_debug4; /* 0x280 */ + u32 reserved37[3]; + u32 hw_lcdif_as_debug5; /* 0x290 */ +}; + +#define MXS_LCDIF_BASE ELCDIF1_IPS_BASE_ADDR + +#define LCDIF_CTRL_SFTRST (1 << 31) +#define LCDIF_CTRL_CLKGATE (1 << 30) +#define LCDIF_CTRL_YCBCR422_INPUT (1 << 29) +#define LCDIF_CTRL_READ_WRITEB (1 << 28) +#define LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE (1 << 27) +#define LCDIF_CTRL_DATA_SHIFT_DIR (1 << 26) +#define LCDIF_CTRL_SHIFT_NUM_BITS_MASK (0x1f << 21) +#define LCDIF_CTRL_SHIFT_NUM_BITS_OFFSET 21 +#define LCDIF_CTRL_DVI_MODE (1 << 20) +#define LCDIF_CTRL_BYPASS_COUNT (1 << 19) +#define LCDIF_CTRL_VSYNC_MODE (1 << 18) +#define LCDIF_CTRL_DOTCLK_MODE (1 << 17) +#define LCDIF_CTRL_DATA_SELECT (1 << 16) +#define LCDIF_CTRL_INPUT_DATA_SWIZZLE_MASK (0x3 << 14) +#define LCDIF_CTRL_INPUT_DATA_SWIZZLE_OFFSET 14 +#define LCDIF_CTRL_CSC_DATA_SWIZZLE_MASK (0x3 << 12) +#define LCDIF_CTRL_CSC_DATA_SWIZZLE_OFFSET 12 +#define LCDIF_CTRL_LCD_DATABUS_WIDTH_MASK (0x3 << 10) +#define LCDIF_CTRL_LCD_DATABUS_WIDTH_OFFSET 10 +#define LCDIF_CTRL_LCD_DATABUS_WIDTH_16BIT (0 << 10) +#define LCDIF_CTRL_LCD_DATABUS_WIDTH_8BIT (1 << 10) +#define LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT (2 << 10) +#define LCDIF_CTRL_LCD_DATABUS_WIDTH_24BIT (3 << 10) +#define LCDIF_CTRL_WORD_LENGTH_MASK (0x3 << 8) +#define LCDIF_CTRL_WORD_LENGTH_OFFSET 8 +#define LCDIF_CTRL_WORD_LENGTH_16BIT (0 << 8) +#define LCDIF_CTRL_WORD_LENGTH_8BIT (1 << 8) +#define LCDIF_CTRL_WORD_LENGTH_18BIT (2 << 8) +#define LCDIF_CTRL_WORD_LENGTH_24BIT (3 << 8) +#define LCDIF_CTRL_RGB_TO_YCBCR422_CSC (1 << 7) +#define LCDIF_CTRL_LCDIF_MASTER (1 << 5) +#define LCDIF_CTRL_DATA_FORMAT_16_BIT (1 << 3) +#define LCDIF_CTRL_DATA_FORMAT_18_BIT (1 << 2) +#define LCDIF_CTRL_DATA_FORMAT_24_BIT (1 << 1) +#define LCDIF_CTRL_RUN (1 << 0) + +#define LCDIF_CTRL1_COMBINE_MPU_WR_STRB (1 << 27) +#define LCDIF_CTRL1_BM_ERROR_IRQ_EN (1 << 26) +#define LCDIF_CTRL1_BM_ERROR_IRQ (1 << 25) +#define LCDIF_CTRL1_RECOVER_ON_UNDERFLOW (1 << 24) +#define LCDIF_CTRL1_INTERLACE_FIELDS (1 << 23) +#define LCDIF_CTRL1_START_INTERLACE_FROM_SECOND_FIELD (1 << 22) +#define LCDIF_CTRL1_FIFO_CLEAR (1 << 21) +#define LCDIF_CTRL1_IRQ_ON_ALTERNATE_FIELDS (1 << 20) +#define LCDIF_CTRL1_BYTE_PACKING_FORMAT_MASK (0xf << 16) +#define LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET 16 +#define LCDIF_CTRL1_OVERFLOW_IRQ_EN (1 << 15) +#define LCDIF_CTRL1_UNDERFLOW_IRQ_EN (1 << 14) +#define LCDIF_CTRL1_CUR_FRAME_DONE_IRQ_EN (1 << 13) +#define LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN (1 << 12) +#define LCDIF_CTRL1_OVERFLOW_IRQ (1 << 11) +#define LCDIF_CTRL1_UNDERFLOW_IRQ (1 << 10) +#define LCDIF_CTRL1_CUR_FRAME_DONE_IRQ (1 << 9) +#define LCDIF_CTRL1_VSYNC_EDGE_IRQ (1 << 8) +#define LCDIF_CTRL1_BUSY_ENABLE (1 << 2) +#define LCDIF_CTRL1_MODE86 (1 << 1) +#define LCDIF_CTRL1_RESET (1 << 0) + +#define LCDIF_CTRL2_OUTSTANDING_REQS_MASK (0x7 << 21) +#define LCDIF_CTRL2_OUTSTANDING_REQS_OFFSET 21 +#define LCDIF_CTRL2_OUTSTANDING_REQS_REQ_1 (0x0 << 21) +#define LCDIF_CTRL2_OUTSTANDING_REQS_REQ_2 (0x1 << 21) +#define LCDIF_CTRL2_OUTSTANDING_REQS_REQ_4 (0x2 << 21) +#define LCDIF_CTRL2_OUTSTANDING_REQS_REQ_8 (0x3 << 21) +#define LCDIF_CTRL2_OUTSTANDING_REQS_REQ_16 (0x4 << 21) +#define LCDIF_CTRL2_BURST_LEN_8 (1 << 20) +#define LCDIF_CTRL2_ODD_LINE_PATTERN_MASK (0x7 << 16) +#define LCDIF_CTRL2_ODD_LINE_PATTERN_OFFSET 16 +#define LCDIF_CTRL2_ODD_LINE_PATTERN_RGB (0x0 << 16) +#define LCDIF_CTRL2_ODD_LINE_PATTERN_RBG (0x1 << 16) +#define LCDIF_CTRL2_ODD_LINE_PATTERN_GBR (0x2 << 16) +#define LCDIF_CTRL2_ODD_LINE_PATTERN_GRB (0x3 << 16) +#define LCDIF_CTRL2_ODD_LINE_PATTERN_BRG (0x4 << 16) +#define LCDIF_CTRL2_ODD_LINE_PATTERN_BGR (0x5 << 16) +#define LCDIF_CTRL2_EVEN_LINE_PATTERN_MASK (0x7 << 12) +#define LCDIF_CTRL2_EVEN_LINE_PATTERN_OFFSET 12 +#define LCDIF_CTRL2_EVEN_LINE_PATTERN_RGB (0x0 << 12) +#define LCDIF_CTRL2_EVEN_LINE_PATTERN_RBG (0x1 << 12) +#define LCDIF_CTRL2_EVEN_LINE_PATTERN_GBR (0x2 << 12) +#define LCDIF_CTRL2_EVEN_LINE_PATTERN_GRB (0x3 << 12) +#define LCDIF_CTRL2_EVEN_LINE_PATTERN_BRG (0x4 << 12) +#define LCDIF_CTRL2_EVEN_LINE_PATTERN_BGR (0x5 << 12) +#define LCDIF_CTRL2_READ_PACK_DIR (1 << 10) +#define LCDIF_CTRL2_READ_MODE_OUTPUT_IN_RGB_FORMAT (1 << 9) +#define LCDIF_CTRL2_READ_MODE_6_BIT_INPUT (1 << 8) +#define LCDIF_CTRL2_READ_MODE_NUM_PACKED_SUBWORDS_MASK (0x7 << 4) +#define LCDIF_CTRL2_READ_MODE_NUM_PACKED_SUBWORDS_OFFSET 4 +#define LCDIF_CTRL2_INITIAL_DUMMY_READ_MASK (0x7 << 1) +#define LCDIF_CTRL2_INITIAL_DUMMY_READ_OFFSET 1 + +#define LCDIF_TRANSFER_COUNT_V_COUNT_MASK (0xffff << 16) +#define LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET 16 +#define LCDIF_TRANSFER_COUNT_H_COUNT_MASK (0xffff << 0) +#define LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET 0 + +#define LCDIF_CUR_BUF_ADDR_MASK 0xffffffff +#define LCDIF_CUR_BUF_ADDR_OFFSET 0 + +#define LCDIF_NEXT_BUF_ADDR_MASK 0xffffffff +#define LCDIF_NEXT_BUF_ADDR_OFFSET 0 + +#define LCDIF_TIMING_CMD_HOLD_MASK (0xff << 24) +#define LCDIF_TIMING_CMD_HOLD_OFFSET 24 +#define LCDIF_TIMING_CMD_SETUP_MASK (0xff << 16) +#define LCDIF_TIMING_CMD_SETUP_OFFSET 16 +#define LCDIF_TIMING_DATA_HOLD_MASK (0xff << 8) +#define LCDIF_TIMING_DATA_HOLD_OFFSET 8 +#define LCDIF_TIMING_DATA_SETUP_MASK (0xff << 0) +#define LCDIF_TIMING_DATA_SETUP_OFFSET 0 + +#define LCDIF_VDCTRL0_VSYNC_OEB (1 << 29) +#define LCDIF_VDCTRL0_ENABLE_PRESENT (1 << 28) +#define LCDIF_VDCTRL0_VSYNC_POL (1 << 27) +#define LCDIF_VDCTRL0_HSYNC_POL (1 << 26) +#define LCDIF_VDCTRL0_DOTCLK_POL (1 << 25) +#define LCDIF_VDCTRL0_ENABLE_POL (1 << 24) +#define LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT (1 << 21) +#define LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT (1 << 20) +#define LCDIF_VDCTRL0_HALF_LINE (1 << 19) +#define LCDIF_VDCTRL0_HALF_LINE_MODE (1 << 18) +#define LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_MASK 0x3ffff +#define LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_OFFSET 0 + +#define LCDIF_VDCTRL1_VSYNC_PERIOD_MASK 0xffffffff +#define LCDIF_VDCTRL1_VSYNC_PERIOD_OFFSET 0 + +#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK (0x3fff << 18) +#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET 18 +#define LCDIF_VDCTRL2_HSYNC_PERIOD_MASK 0x3ffff +#define LCDIF_VDCTRL2_HSYNC_PERIOD_OFFSET 0 + +#define LCDIF_VDCTRL3_MUX_SYNC_SIGNALS (1 << 29) +#define LCDIF_VDCTRL3_VSYNC_ONLY (1 << 28) +#define LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_MASK (0xfff << 16) +#define LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET 16 +#define LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_MASK (0xffff << 0) +#define LCDIF_VDCTRL3_VERTICAL_WAIT_CNT_OFFSET 0 + +#define LCDIF_VDCTRL4_DOTCLK_DLY_SEL_MASK (0x7 << 29) +#define LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET 29 +#define LCDIF_VDCTRL4_SYNC_SIGNALS_ON (1 << 18) +#define LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_MASK 0x3ffff +#define LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_OFFSET 0 + + +extern void check_cpu_temperature(void); + +extern void pcie_power_up(void); +extern void pcie_power_off(void); + +/* If ROM fail back to USB recover mode, USBPH0_PWD will be clear to use USB + * If boot from the other mode, USB0_PWD will keep reset value + */ +#define is_boot_from_usb(void) (readl(USBOTG1_IPS_BASE_ADDR + 0x158) || \ + readl(USBOTG2_IPS_BASE_ADDR + 0x158)) +#define disconnect_from_pc(void) writel(0x0, USBOTG1_IPS_BASE_ADDR + 0x140) + +/* Boot device type */ +#define BOOT_TYPE_SD 0x1 +#define BOOT_TYPE_MMC 0x2 +#define BOOT_TYPE_NAND 0x3 +#define BOOT_TYPE_QSPI 0x4 +#define BOOT_TYPE_WEIM 0x5 +#define BOOT_TYPE_SPINOR 0x6 + +struct bootrom_sw_info { + u8 reserved_1; + u8 boot_dev_instance; + u8 boot_dev_type; + u8 reserved_2; + u32 arm_core_freq; + u32 axi_freq; + u32 ddr_freq; + u32 gpt1_freq; + u32 reserved_3[3]; +}; + +#endif /* __ASSEMBLER__*/ +#endif /* __ASM_ARCH_MX7_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mx7/sys_proto.h b/arch/arm/include/asm/arch-mx7/sys_proto.h new file mode 100644 index 0000000000..ca7608bd56 --- /dev/null +++ b/arch/arm/include/asm/arch-mx7/sys_proto.h @@ -0,0 +1,9 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/imx-common/sys_proto.h> + +void set_wdog_reset(struct wdog_regs *wdog); diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h index 6109b92777..b1513e9aaf 100644 --- a/arch/arm/include/asm/arch-omap5/cpu.h +++ b/arch/arm/include/asm/arch-omap5/cpu.h @@ -56,8 +56,6 @@ struct watchdog { #endif /* __ASSEMBLY__ */ #endif /* __KERNEL_STRICT_NAMES */ -#define BIT(x) (1 << (x)) - #define WD_UNLOCK1 0xAAAA #define WD_UNLOCK2 0x5555 diff --git a/arch/arm/include/asm/arch-rmobile/rcar-base.h b/arch/arm/include/asm/arch-rmobile/rcar-base.h index d594cd77c1..53ead265bd 100644 --- a/arch/arm/include/asm/arch-rmobile/rcar-base.h +++ b/arch/arm/include/asm/arch-rmobile/rcar-base.h @@ -28,6 +28,9 @@ #define SCIF3_BASE 0xE6EA8000 #define SCIF4_BASE 0xE6EE0000 #define SCIF5_BASE 0xE6EE8000 +#define SCIFA0_BASE 0xE6C40000 +#define SCIFA1_BASE 0xE6C50000 +#define SCIFA2_BASE 0xE6C60000 /* Module stop status register */ #define MSTPSR0 0xE6150030 diff --git a/arch/arm/include/asm/arch-spear/spr_misc.h b/arch/arm/include/asm/arch-spear/spr_misc.h index b55026ecdf..6f2e19ed61 100644 --- a/arch/arm/include/asm/arch-spear/spr_misc.h +++ b/arch/arm/include/asm/arch-spear/spr_misc.h @@ -253,5 +253,6 @@ struct misc_regs { #define SOC_SPEAR320 203 extern int get_socrev(void); +int fsmc_nand_switch_ecc(uint32_t eccstrength); #endif diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h index acbec46cb8..a129dd4ee0 100644 --- a/arch/arm/include/asm/arch-sunxi/spl.h +++ b/arch/arm/include/asm/arch-sunxi/spl.h @@ -1,20 +1,50 @@ /* - * This is a copy of omap3/spl.h: - * - * (C) Copyright 2012 - * Texas Instruments, <www.ti.com> + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_ARCH_SPL_H_ -#define BOOT_DEVICE_NONE 0 -#define BOOT_DEVICE_XIP 1 -#define BOOT_DEVICE_NAND 2 -#define BOOT_DEVICE_ONE_NAND 3 -#define BOOT_DEVICE_MMC2 5 /*emmc*/ -#define BOOT_DEVICE_MMC1 6 -#define BOOT_DEVICE_XIPWAIT 7 -#define BOOT_DEVICE_MMC2_2 0xff +#define BOOT0_MAGIC "eGON.BT0" +#define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */ +#define SPL_HEADER_VERSION 1 + +/* Note: A80 will require special handling here: SPL_ADDR 0x10000 */ +#define SPL_ADDR 0x0 + +/* boot head definition from sun4i boot code */ +struct boot_file_head { + uint32_t b_instruction; /* one intruction jumping to real code */ + uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */ + uint32_t check_sum; /* generated by PC */ + uint32_t length; /* generated by PC */ + /* + * We use a simplified header, only filling in what is needed + * by the boot ROM. To be compatible with Allwinner tools we + * would need to implement the proper fields here instead of + * padding. + * + * Actually we want the ability to recognize our "sunxi" variant + * of the SPL. To do so, let's place a special signature into the + * "pub_head_size" field. We can reasonably expect Allwinner's + * boot0 to always have the upper 16 bits of this set to 0 (after + * all the value shouldn't be larger than the limit imposed by + * SRAM size). + * If the signature is present (at 0x14), then we know it's safe + * to use the remaining 8 bytes (at 0x18) for our own purposes. + * (E.g. sunxi-tools "fel" utility can pass information there.) + */ + union { + uint32_t pub_head_size; + uint8_t spl_signature[4]; + }; + uint32_t fel_script_address; + uint32_t reserved; /* padding, align to 32 bytes */ +}; + +#define is_boot0_magic(addr) (memcmp((void *)addr, BOOT0_MAGIC, 8) == 0) + #endif diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h index d570d7f134..e56031d1af 100644 --- a/arch/arm/include/asm/arch-tegra/clock.h +++ b/arch/arm/include/asm/arch-tegra/clock.h @@ -44,6 +44,9 @@ enum { /* return the current oscillator clock frequency */ enum clock_osc_freq clock_get_osc_freq(void); +/* return the clk_m frequency */ +unsigned int clk_m_get_rate(unsigned int parent_rate); + /** * Start PLL using the provided configuration parameters. * @@ -338,8 +341,8 @@ void arch_timer_init(void); void tegra30_set_up_pllp(void); -/* Number of PLL-based clocks (i.e. not OSC or 32KHz) */ -#define CLOCK_ID_PLL_COUNT (CLOCK_ID_COUNT - 2) +/* Number of PLL-based clocks (i.e. not OSC, MCLK or 32KHz) */ +#define CLOCK_ID_PLL_COUNT (CLOCK_ID_COUNT - 3) struct clk_pll_info { u32 m_shift:5; /* DIVM_SHIFT */ diff --git a/arch/arm/include/asm/arch-tegra/dc.h b/arch/arm/include/asm/arch-tegra/dc.h index 6ffb468395..3a87f0b956 100644 --- a/arch/arm/include/asm/arch-tegra/dc.h +++ b/arch/arm/include/asm/arch-tegra/dc.h @@ -364,8 +364,6 @@ struct dc_ctlr { struct dc_winbuf_reg winbuf; /* WINBUF A/B/C 0x800 ~ 0x80d */ }; -#define BIT(pos) (1U << pos) - /* DC_CMD_DISPLAY_COMMAND 0x032 */ #define CTRL_MODE_SHIFT 5 #define CTRL_MODE_MASK (0x3 << CTRL_MODE_SHIFT) diff --git a/arch/arm/include/asm/arch-tegra/gpio.h b/arch/arm/include/asm/arch-tegra/gpio.h index 7334e0ccd5..daf5698e66 100644 --- a/arch/arm/include/asm/arch-tegra/gpio.h +++ b/arch/arm/include/asm/arch-tegra/gpio.h @@ -28,15 +28,6 @@ struct tegra_gpio_config { }; /** - * tegra_spl_gpio_direction_output() - set the output value of a GPIO - * - * This function is only used from SPL on seaboard, which needs to enable a - * GPIO to get the UART running. It could be done in U-Boot rather than SPL, - * but for now, this gets it working - */ -int tegra_spl_gpio_direction_output(int gpio, int value); - -/** * Configure a list of GPIOs * * @param config List of GPIO configurations diff --git a/arch/arm/include/asm/arch-tegra114/clock-tables.h b/arch/arm/include/asm/arch-tegra114/clock-tables.h index d8fa0e1d2c..3f910f5ae8 100644 --- a/arch/arm/include/asm/arch-tegra114/clock-tables.h +++ b/arch/arm/include/asm/arch-tegra114/clock-tables.h @@ -38,6 +38,7 @@ enum clock_id { /* These are the base clocks (inputs to the Tegra SOC) */ CLOCK_ID_32KHZ, CLOCK_ID_OSC, + CLOCK_ID_CLK_M, CLOCK_ID_COUNT, /* number of PLLs */ CLOCK_ID_DISPLAY2, /* placeholder */ diff --git a/arch/arm/include/asm/arch-tegra114/clock.h b/arch/arm/include/asm/arch-tegra114/clock.h index abbefcd0e4..9bee397787 100644 --- a/arch/arm/include/asm/arch-tegra114/clock.h +++ b/arch/arm/include/asm/arch-tegra114/clock.h @@ -25,4 +25,7 @@ #define OSC_FREQ_SHIFT 28 #define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT) +/* CLK_RST_CONTROLLER_PLLC_MISC_0 */ +#define PLLC_IDDQ (1 << 26) + #endif /* _TEGRA114_CLOCK_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/clock-tables.h b/arch/arm/include/asm/arch-tegra124/clock-tables.h index 3c67e72afe..9466b4ffb3 100644 --- a/arch/arm/include/asm/arch-tegra124/clock-tables.h +++ b/arch/arm/include/asm/arch-tegra124/clock-tables.h @@ -30,6 +30,7 @@ enum clock_id { /* These are the base clocks (inputs to the Tegra SoC) */ CLOCK_ID_32KHZ, CLOCK_ID_OSC, + CLOCK_ID_CLK_M, CLOCK_ID_COUNT, /* number of PLLs */ diff --git a/arch/arm/include/asm/arch-tegra124/clock.h b/arch/arm/include/asm/arch-tegra124/clock.h index e202cc5a7f..ff99b9dfaf 100644 --- a/arch/arm/include/asm/arch-tegra124/clock.h +++ b/arch/arm/include/asm/arch-tegra124/clock.h @@ -16,6 +16,9 @@ #define OSC_FREQ_SHIFT 28 #define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT) +/* CLK_RST_CONTROLLER_PLLC_MISC_0 */ +#define PLLC_IDDQ (1 << 26) + /* CLK_RST_CONTROLLER_CLK_SOURCE_SOR0_0 */ #define SOR0_CLK_SEL0 (1 << 14) #define SOR0_CLK_SEL1 (1 << 15) diff --git a/arch/arm/include/asm/arch-tegra20/clock-tables.h b/arch/arm/include/asm/arch-tegra20/clock-tables.h index 894be088cd..812e8760d0 100644 --- a/arch/arm/include/asm/arch-tegra20/clock-tables.h +++ b/arch/arm/include/asm/arch-tegra20/clock-tables.h @@ -29,6 +29,7 @@ enum clock_id { /* These are the base clocks (inputs to the Tegra SOC) */ CLOCK_ID_32KHZ, CLOCK_ID_OSC, + CLOCK_ID_CLK_M, CLOCK_ID_COUNT, /* number of clocks */ CLOCK_ID_NONE = -1, diff --git a/arch/arm/include/asm/arch-tegra210/clock-tables.h b/arch/arm/include/asm/arch-tegra210/clock-tables.h index 175040dae6..a612485d8e 100644 --- a/arch/arm/include/asm/arch-tegra210/clock-tables.h +++ b/arch/arm/include/asm/arch-tegra210/clock-tables.h @@ -30,6 +30,7 @@ enum clock_id { /* These are the base clocks (inputs to the Tegra SoC) */ CLOCK_ID_32KHZ, CLOCK_ID_OSC, + CLOCK_ID_CLK_M, CLOCK_ID_COUNT, /* number of PLLs */ diff --git a/arch/arm/include/asm/arch-tegra30/clock-tables.h b/arch/arm/include/asm/arch-tegra30/clock-tables.h index cb619f1f2d..f7c7af80fa 100644 --- a/arch/arm/include/asm/arch-tegra30/clock-tables.h +++ b/arch/arm/include/asm/arch-tegra30/clock-tables.h @@ -38,6 +38,7 @@ enum clock_id { /* These are the base clocks (inputs to the Tegra SOC) */ CLOCK_ID_32KHZ, CLOCK_ID_OSC, + CLOCK_ID_CLK_M, CLOCK_ID_COUNT, /* number of PLLs */ CLOCK_ID_DISPLAY2, /* Tegra3, placeholder */ diff --git a/arch/arm/include/asm/arch-u8500/clock.h b/arch/arm/include/asm/arch-u8500/clock.h deleted file mode 100644 index 1b2fdb7923..0000000000 --- a/arch/arm/include/asm/arch-u8500/clock.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __ASM_ARCH_CLOCK -#define __ASM_ARCH_CLOCK - -struct prcmu { - unsigned int armclkfix_mgt; - unsigned int armclk_mgt; - unsigned int svammdspclk_mgt; - unsigned int siammdspclk_mgt; - unsigned int reserved; - unsigned int sgaclk_mgt; - unsigned int uartclk_mgt; - unsigned int msp02clk_mgt; - unsigned int i2cclk_mgt; - unsigned int sdmmcclk_mgt; - unsigned int slimclk_mgt; - unsigned int per1clk_mgt; - unsigned int per2clk_mgt; - unsigned int per3clk_mgt; - unsigned int per5clk_mgt; - unsigned int per6clk_mgt; - unsigned int per7clk_mgt; - unsigned int lcdclk_mgt; - unsigned int reserved1; - unsigned int bmlclk_mgt; - unsigned int hsitxclk_mgt; - unsigned int hsirxclk_mgt; - unsigned int hdmiclk_mgt; - unsigned int apeatclk_mgt; - unsigned int apetraceclk_mgt; - unsigned int mcdeclk_mgt; - unsigned int ipi2cclk_mgt; - unsigned int dsialtclk_mgt; - unsigned int spare2clk_mgt; - unsigned int dmaclk_mgt; - unsigned int b2r2clk_mgt; - unsigned int tvclk_mgt; - unsigned int unused[82]; - unsigned int tcr; - unsigned int unused1[23]; - unsigned int ape_softrst; -}; - -extern void u8500_clock_enable(int periph, int kern, int cluster); - -void db8500_clocks_init(void); - -#endif /* __ASM_ARCH_CLOCK */ diff --git a/arch/arm/include/asm/arch-u8500/db8500_gpio.h b/arch/arm/include/asm/arch-u8500/db8500_gpio.h deleted file mode 100644 index 7c85a89172..0000000000 --- a/arch/arm/include/asm/arch-u8500/db8500_gpio.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. - * The purpose is that GPIO config found in kernel should work by simply - * copy-paste it to U-boot. - * - * Ported to U-boot by: - * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __DB8500_GPIO_H__ -#define __DB8500_GPIO_H__ - -/* Alternate functions: function C is set in hw by setting both A and B */ -enum db8500_gpio_alt { - DB8500_GPIO_ALT_GPIO = 0, - DB8500_GPIO_ALT_A = 1, - DB8500_GPIO_ALT_B = 2, - DB8500_GPIO_ALT_C = (DB8500_GPIO_ALT_A | DB8500_GPIO_ALT_B) -}; - -enum db8500_gpio_pull { - DB8500_GPIO_PULL_NONE, - DB8500_GPIO_PULL_UP, - DB8500_GPIO_PULL_DOWN -}; - -void db8500_gpio_set_pull(unsigned gpio, enum db8500_gpio_pull pull); -void db8500_gpio_make_input(unsigned gpio); -int db8500_gpio_get_input(unsigned gpio); -void db8500_gpio_make_output(unsigned gpio, int val); -void db8500_gpio_set_output(unsigned gpio, int val); - -#endif /* __DB8500_GPIO_H__ */ diff --git a/arch/arm/include/asm/arch-u8500/db8500_pincfg.h b/arch/arm/include/asm/arch-u8500/db8500_pincfg.h deleted file mode 100644 index 64957016c1..0000000000 --- a/arch/arm/include/asm/arch-u8500/db8500_pincfg.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. - * The purpose is that GPIO config found in kernel should work by simply - * copy-paste it to U-boot. Ported 2010 to U-boot by: - * Author: Joakim Axelsson <joakim.axelsson AT stericsson.com> - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * - * - * Based on arch/arm/mach-pxa/include/mach/mfp.h: - * Copyright (C) 2007 Marvell International Ltd. - * eric miao <eric.miao@marvell.com> - */ - -#ifndef __DB8500_PINCFG_H -#define __DB8500_PINCFG_H - -#include "db8500_gpio.h" - -/* - * U-boot info: - * SLPM (sleep mode) config will be ignored by U-boot but it is still - * possible to configure it in order to keep cut-n-paste compability - * with Linux kernel config. - * - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour (not used in U-boot) - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state (not used in U-boot) - * bit 19..20 - SLPM direction (not used in U-boot) - * bit 21..22 - SLPM Value (if output) (not used in U-boot) - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - * PIN_CFG_PULL - default config with alternate function and pull up/down - */ - -/* Sleep mode */ -enum db8500_gpio_slpm { - DB8500_GPIO_SLPM_INPUT, - DB8500_GPIO_SLPM_WAKEUP_ENABLE = DB8500_GPIO_SLPM_INPUT, - DB8500_GPIO_SLPM_NOCHANGE, - DB8500_GPIO_SLPM_WAKEUP_DISABLE = DB8500_GPIO_SLPM_NOCHANGE, -}; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (DB8500_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (DB8500_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (DB8500_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (DB8500_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (DB8500_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (DB8500_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (DB8500_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (DB8500_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (DB8500_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE \ - (DB8500_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE \ - (DB8500_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + DB8500_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + DB8500_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + DB8500_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -#define PIN_CFG_PULL(num, alt, pull) \ - ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\ - (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull)) - -/** - * db8500_gpio_config_pins - configure several pins at once - * @cfgs: array of pin configurations - * @num: number of elments in the array - * - * Configures several GPIO pins. - */ -void db8500_gpio_config_pins(unsigned long *cfgs, size_t num); - -#endif diff --git a/arch/arm/include/asm/arch-u8500/gpio.h b/arch/arm/include/asm/arch-u8500/gpio.h deleted file mode 100644 index afa5942c99..0000000000 --- a/arch/arm/include/asm/arch-u8500/gpio.h +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _UX500_GPIO_h -#define _UX500_GPIO_h - -#include <asm/types.h> -#include <asm/io.h> -#include <asm/errno.h> - -#include <asm/arch/sys_proto.h> -#include <asm/arch/u8500.h> - -#define GPIO_TOTAL_PINS 268 - -#define GPIO_PINS_PER_BLOCK 32 -#define GPIO_BLOCKS_COUNT (GPIO_TOTAL_PINS/GPIO_PINS_PER_BLOCK + 1) -#define GPIO_BLOCK(pin) (((pin + GPIO_PINS_PER_BLOCK) >> 5) - 1) - - -struct gpio_register { - u32 gpio_dat; /* data register : 0x000 */ - u32 gpio_dats; /* data Set register : 0x004 */ - u32 gpio_datc; /* data Clear register : 0x008 */ - u32 gpio_pdis; /* Pull disable register : 0x00C */ - u32 gpio_dir; /* data direction register : 0x010 */ - u32 gpio_dirs; /* data dir Set register : 0x014 */ - u32 gpio_dirc; /* data dir Clear register : 0x018 */ - u32 gpio_slpm; /* Sleep mode register : 0x01C */ - u32 gpio_afsa; /* AltFun A Select reg : 0x020 */ - u32 gpio_afsb; /* AltFun B Select reg : 0x024 */ - u32 gpio_lowemi;/* low EMI Select reg : 0x028 */ - u32 reserved_1[(0x040 - 0x02C) >> 2]; /*0x028-0x3C Reserved*/ - u32 gpio_rimsc; /* rising edge intr set/clear : 0x040 */ - u32 gpio_fimsc; /* falling edge intr set/clear register : 0x044 */ - u32 gpio_mis; /* masked interrupt status register : 0x048 */ - u32 gpio_ic; /* Interrupt Clear register : 0x04C */ - u32 gpio_rwimsc;/* Rising-edge Wakeup IMSC register : 0x050 */ - u32 gpio_fwimsc;/* Falling-edge Wakeup IMSC register : 0x054 */ - u32 gpio_wks; /* Wakeup Status register : 0x058 */ -}; - -/* Error values returned by functions */ -enum gpio_error { - GPIO_OK = 0, - GPIO_UNSUPPORTED_HW = -2, - GPIO_UNSUPPORTED_FEATURE = -3, - GPIO_INVALID_PARAMETER = -4, - GPIO_REQUEST_NOT_APPLICABLE = -5, - GPIO_REQUEST_PENDING = -6, - GPIO_NOT_CONFIGURED = -7, - GPIO_INTERNAL_ERROR = -8, - GPIO_INTERNAL_EVENT = 1, - GPIO_REMAINING_EVENT = 2, - GPIO_NO_MORE_PENDING_EVENT = 3, - GPIO_INVALID_CLIENT = -25, - GPIO_INVALID_PIN = -26, - GPIO_PIN_BUSY = -27, - GPIO_PIN_NOT_ALLOCATED = -28, - GPIO_WRONG_CLIENT = -29, - GPIO_UNSUPPORTED_ALTFUNC = -30, -}; - -/*GPIO DEVICE ID */ -enum gpio_device_id { - GPIO_DEVICE_ID_0, - GPIO_DEVICE_ID_1, - GPIO_DEVICE_ID_2, - GPIO_DEVICE_ID_3, - GPIO_DEVICE_ID_INVALID -}; - -/* - * Alternate Function: - * refered in altfun_table to pointout particular altfun to be enabled - * when using GPIO_ALT_FUNCTION A/B/C enable/disable operation - */ -enum gpio_alt_function { - GPIO_ALT_UART_0_MODEM, - GPIO_ALT_UART_0_NO_MODEM, - GPIO_ALT_UART_1, - GPIO_ALT_UART_2, - GPIO_ALT_I2C_0, - GPIO_ALT_I2C_1, - GPIO_ALT_I2C_2, - GPIO_ALT_I2C_3, - GPIO_ALT_MSP_0, - GPIO_ALT_MSP_1, - GPIO_ALT_MSP_2, - GPIO_ALT_MSP_3, - GPIO_ALT_MSP_4, - GPIO_ALT_MSP_5, - GPIO_ALT_SSP_0, - GPIO_ALT_SSP_1, - GPIO_ALT_MM_CARD0, - GPIO_ALT_SD_CARD0, - GPIO_ALT_DMA_0, - GPIO_ALT_DMA_1, - GPIO_ALT_HSI0, - GPIO_ALT_CCIR656_INPUT, - GPIO_ALT_CCIR656_OUTPUT, - GPIO_ALT_LCD_PANEL, - GPIO_ALT_MDIF, - GPIO_ALT_SDRAM, - GPIO_ALT_HAMAC_AUDIO_DBG, - GPIO_ALT_HAMAC_VIDEO_DBG, - GPIO_ALT_CLOCK_RESET, - GPIO_ALT_TSP, - GPIO_ALT_IRDA, - GPIO_ALT_USB_MINIMUM, - GPIO_ALT_USB_I2C, - GPIO_ALT_OWM, - GPIO_ALT_PWL, - GPIO_ALT_FSMC, - GPIO_ALT_COMP_FLASH, - GPIO_ALT_SRAM_NOR_FLASH, - GPIO_ALT_FSMC_ADDLINE_0_TO_15, - GPIO_ALT_SCROLL_KEY, - GPIO_ALT_MSHC, - GPIO_ALT_HPI, - GPIO_ALT_USB_OTG, - GPIO_ALT_SDIO, - GPIO_ALT_HSMMC, - GPIO_ALT_FSMC_ADD_DATA_0_TO_25, - GPIO_ALT_HSI1, - GPIO_ALT_NOR, - GPIO_ALT_NAND, - GPIO_ALT_KEYPAD, - GPIO_ALT_VPIP, - GPIO_ALT_CAM, - GPIO_ALT_CCP1, - GPIO_ALT_EMMC, - GPIO_ALT_POP_EMMC, - GPIO_ALT_FUNMAX /* Add new alt func before this */ -}; - -/* Defines pin assignment(Software mode or Alternate mode) */ -enum gpio_mode { - GPIO_MODE_LEAVE_UNCHANGED, /* Parameter will be ignored */ - GPIO_MODE_SOFTWARE, /* Pin connected to GPIO (SW controlled) */ - GPIO_ALTF_A, /* Pin connected to altfunc 1 (HW periph 1) */ - GPIO_ALTF_B, /* Pin connected to altfunc 2 (HW periph 2) */ - GPIO_ALTF_C, /* Pin connected to altfunc 3 (HW periph 3) */ - GPIO_ALTF_FIND, /* Pin connected to altfunc 3 (HW periph 3) */ - GPIO_ALTF_DISABLE /* Pin connected to altfunc 3 (HW periph 3) */ -}; - -/* Defines GPIO pin direction */ -enum gpio_direction { - GPIO_DIR_LEAVE_UNCHANGED, /* Parameter will be ignored */ - GPIO_DIR_INPUT, /* GPIO set as input */ - GPIO_DIR_OUTPUT /* GPIO set as output */ -}; - -/* Interrupt trigger mode */ -enum gpio_trig { - GPIO_TRIG_LEAVE_UNCHANGED, /* Parameter will be ignored */ - GPIO_TRIG_DISABLE, /* Trigger no IT */ - GPIO_TRIG_RISING_EDGE, /* Trigger an IT on rising edge */ - GPIO_TRIG_FALLING_EDGE, /* Trigger an IT on falling edge */ - GPIO_TRIG_BOTH_EDGES, /* Trigger an IT on rising and falling edge */ - GPIO_TRIG_HIGH_LEVEL, /* Trigger an IT on high level */ - GPIO_TRIG_LOW_LEVEL /* Trigger an IT on low level */ -}; - -/* Configuration parameters for one GPIO pin.*/ -struct gpio_config { - enum gpio_mode mode; - enum gpio_direction direction; - enum gpio_trig trig; - char *dev_name; /* Who owns the gpio pin */ -}; - -/* GPIO pin data*/ -enum gpio_data { - GPIO_DATA_LOW, - GPIO_DATA_HIGH -}; - -/* GPIO behaviour in sleep mode */ -enum gpio_sleep_mode { - GPIO_SLEEP_MODE_LEAVE_UNCHANGED, /* Parameter will be ignored */ - GPIO_SLEEP_MODE_INPUT_DEFAULTVOLT, /* GPIO is an input with pull - up/down enabled when in sleep - mode. */ - GPIO_SLEEP_MODE_CONTROLLED_BY_GPIO /* GPIO pin is controlled by - GPIO IP. So mode, direction - and data values for GPIO pin - in sleep mode are determined - by configuration set to GPIO - pin before entering to sleep - mode. */ -}; - -/* GPIO ability to wake the system up from sleep mode.*/ -enum gpio_wake { - GPIO_WAKE_LEAVE_UNCHANGED, /* Parameter will be ignored */ - GPIO_WAKE_DISABLE, /* No wake of system from sleep mode. */ - GPIO_WAKE_LOW_LEVEL, /* Wake the system up on a LOW level. */ - GPIO_WAKE_HIGH_LEVEL, /* Wake the system up on a HIGH level. */ - GPIO_WAKE_RISING_EDGE, /* Wake the system up on a RISING edge. */ - GPIO_WAKE_FALLING_EDGE, /* Wake the system up on a FALLING edge. */ - GPIO_WAKE_BOTH_EDGES /* Wake the system up on both RISE and FALL. */ -}; - -/* Configuration parameters for one GPIO pin in sleep mode.*/ -struct gpio_sleep_config { - enum gpio_sleep_mode sleep_mode;/* GPIO behaviour in sleep mode. */ - enum gpio_wake wake; /* GPIO ability to wake up system. */ -}; - -extern int gpio_setpinconfig(int pin_id, struct gpio_config *pin_config); -extern int gpio_resetpinconfig(int pin_id, char *dev_name); -extern int gpio_writepin(int pin_id, enum gpio_data value, char *dev_name); -extern int gpio_readpin(int pin_id, enum gpio_data *value); -extern int gpio_altfuncenable(enum gpio_alt_function altfunc, - char *dev_name); -extern int gpio_altfuncdisable(enum gpio_alt_function altfunc, - char *dev_name); - -struct gpio_altfun_data { - u16 altfun; - u16 start; - u16 end; - u16 cont; - u8 type; -}; -#endif diff --git a/arch/arm/include/asm/arch-u8500/hardware.h b/arch/arm/include/asm/arch-u8500/hardware.h deleted file mode 100644 index e6a899dac1..0000000000 --- a/arch/arm/include/asm/arch-u8500/hardware.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* Peripheral clusters */ - -#define U8500_PER3_BASE 0x80000000 -#define U8500_PER2_BASE 0x80110000 -#define U8500_PER1_BASE 0x80120000 -#define U8500_PER4_BASE 0x80150000 - -#define U8500_PER6_BASE 0xa03c0000 -#define U8500_PER7_BASE 0xa03d0000 -#define U8500_PER5_BASE 0xa03e0000 - -/* GPIO */ - -#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) -#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xE000 + 0x80) - -#define U8500_GPIO2_BASE (U8500_PER3_BASE + 0xE000) -#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xE000 + 0x80) -#define U8500_GPIO4_BASE (U8500_PER3_BASE + 0xE000 + 0x100) -#define U8500_GPIO5_BASE (U8500_PER3_BASE + 0xE000 + 0x180) - -#define U8500_GPIO6_BASE (U8500_PER2_BASE + 0xE000) -#define U8500_GPIO7_BASE (U8500_PER2_BASE + 0xE000 + 0x80) - -#define U8500_GPIO8_BASE (U8500_PER5_BASE + 0x1E000) - -/* Per7 */ -#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000) - -/* Per6 */ -#define U8500_MTU0_BASE_V1 (U8500_PER6_BASE + 0x6000) -#define U8500_MTU1_BASE_V1 (U8500_PER6_BASE + 0x7000) -#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) - -/* Per5 */ -#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) - -/* Per4 */ -#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) - -/* Per3 */ -#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) -#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) - -/* Per2 */ -#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) - -/* Per1 */ -#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) -#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) -#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) - -/* Last page of Boot ROM */ -#define U8500_BOOTROM_BASE 0x90000000 -#define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOTROM_BASE + 0x1FFF4) -#define U8500_ASIC_ID_LOC_V2 (U8500_BOOTROM_BASE + 0x1DBF4) - -/* AB8500 specifics */ - -/* address bank */ -#define AB8500_REGU_CTRL2 0x0004 -#define AB8500_MISC 0x0010 - -/* registers */ -#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A -#define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421 -#define AB8500_REV_REG 0x1080 - -#define AB8500_GPIO_SEL2_REG 0x1001 -#define AB8500_GPIO_DIR2_REG 0x1011 -#define AB8500_GPIO_DIR4_REG 0x1013 -#define AB8500_GPIO_SEL4_REG 0x1003 -#define AB8500_GPIO_OUT2_REG 0x1021 -#define AB8500_GPIO_OUT4_REG 0x1023 - -#define LDO_VAUX3_ENABLE_MASK 0x3 -#define LDO_VAUX3_ENABLE_VAL 0x1 -#define LDO_VAUX3_SEL_MASK 0xf -#define LDO_VAUX3_SEL_2V9 0xd -#define LDO_VAUX3_V2_SEL_MASK 0x7 -#define LDO_VAUX3_V2_SEL_2V91 0x7 - - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-u8500/prcmu.h b/arch/arm/include/asm/arch-u8500/prcmu.h deleted file mode 100644 index e7f0450079..0000000000 --- a/arch/arm/include/asm/arch-u8500/prcmu.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson SA - * - * Copied from the Linux version: - * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __MACH_PRCMU_FW_V1_H -#define __MACH_PRCMU_FW_V1_H - -#define AP_EXECUTE 2 -#define I2CREAD 1 -#define I2C_WR_OK 1 -#define I2C_RD_OK 2 -#define I2CWRITE 0 - -#define PRCMU_BASE U8500_PRCMU_BASE -#define PRCMU_BASE_TCDM U8500_PRCMU_TCDM_BASE -#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018) -#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C) -#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020) -#define PRCM_SDMMCCLK_MGT_REG (PRCMU_BASE + 0x024) -#define PRCM_PER1CLK_MGT_REG (PRCMU_BASE + 0x02C) -#define PRCM_PER2CLK_MGT_REG (PRCMU_BASE + 0x030) -#define PRCM_PER3CLK_MGT_REG (PRCMU_BASE + 0x034) -#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038) -#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C) -#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040) -#define PRCM_MBOX_CPU_VAL (PRCMU_BASE + 0x0FC) -#define PRCM_MBOX_CPU_SET (PRCMU_BASE + 0x100) - -#define PRCM_ARM_IT1_CLEAR (PRCMU_BASE + 0x48C) -#define PRCM_ARM_IT1_VAL (PRCMU_BASE + 0x494) -#define PRCM_TCR (PRCMU_BASE + 0x1C8) -#define PRCM_REQ_MB5 (PRCMU_BASE_TCDM + 0xE44) -#define PRCM_ACK_MB5 (PRCMU_BASE_TCDM + 0xDF4) -#define PRCM_XP70_CUR_PWR_STATE (PRCMU_BASE_TCDM + 0xFFC) -/* Mailbox 5 Requests */ -#define PRCM_REQ_MB5_I2COPTYPE_REG (PRCM_REQ_MB5 + 0x0) -#define PRCM_REQ_MB5_BIT_FIELDS (PRCM_REQ_MB5 + 0x1) -#define PRCM_REQ_MB5_I2CSLAVE (PRCM_REQ_MB5 + 0x2) -#define PRCM_REQ_MB5_I2CVAL (PRCM_REQ_MB5 + 0x3) - -/* Mailbox 5 ACKs */ -#define PRCM_ACK_MB5_STATUS (PRCM_ACK_MB5 + 0x1) -#define PRCM_ACK_MB5_SLAVE (PRCM_ACK_MB5 + 0x2) -#define PRCM_ACK_MB5_VAL (PRCM_ACK_MB5 + 0x3) - -#define LOW_POWER_WAKEUP 1 -#define EXE_WAKEUP 0 - -#define REQ_MB5 5 - -#define ab8500_read prcmu_i2c_read -#define ab8500_write prcmu_i2c_write - -int prcmu_i2c_read(u8 reg, u16 slave); -int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data); - -void u8500_prcmu_enable(u32 *reg); -void db8500_prcmu_init(void); - -#endif /* __MACH_PRCMU_FW_V1_H */ diff --git a/arch/arm/include/asm/arch-u8500/sys_proto.h b/arch/arm/include/asm/arch-u8500/sys_proto.h deleted file mode 100644 index 03a3cd35bc..0000000000 --- a/arch/arm/include/asm/arch-u8500/sys_proto.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef _SYS_PROTO_H_ -#define _SYS_PROTO_H_ - -void gpio_init(void); -int u8500_mmc_power_init(void); - -#endif /* _SYS_PROTO_H_ */ diff --git a/arch/arm/include/asm/arch-u8500/u8500.h b/arch/arm/include/asm/arch-u8500/u8500.h deleted file mode 100644 index 16ad081bc1..0000000000 --- a/arch/arm/include/asm/arch-u8500/u8500.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __U8500_H -#define __U8500_H - -/* - * base register values for U8500 - */ -#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock - Management Unit */ -#define CFG_SDRAMC_BASE 0x903CF000 /* SDRAMC cnf registers */ -#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ - -/* - * U8500 GPIO register base for 9 banks - */ -#define U8500_GPIO_0_BASE 0x8012E000 -#define U8500_GPIO_1_BASE 0x8012E080 -#define U8500_GPIO_2_BASE 0x8000E000 -#define U8500_GPIO_3_BASE 0x8000E080 -#define U8500_GPIO_4_BASE 0x8000E100 -#define U8500_GPIO_5_BASE 0x8000E180 -#define U8500_GPIO_6_BASE 0x8011E000 -#define U8500_GPIO_7_BASE 0x8011E080 -#define U8500_GPIO_8_BASE 0xA03FE000 - -#endif /* __U8500_H */ diff --git a/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h b/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h index 6730cde1b8..9022c465a0 100644 --- a/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h +++ b/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h @@ -11,18 +11,6 @@ #ifndef __ASM_ARCH_VF610_DDRMC_H #define __ASM_ARCH_VF610_DDRMC_H -struct ddrmc_lvl_info { - u16 wrlvl_reg_en; - u16 wrlvl_dl_0; - u16 wrlvl_dl_1; - u16 rdlvl_gt_reg_en; - u16 rdlvl_gt_dl_0; - u16 rdlvl_gt_dl_1; - u16 rdlvl_reg_en; - u16 rdlvl_dl_0; - u16 rdlvl_dl_1; -}; - struct ddr3_jedec_timings { u8 tinit; u32 trst_pwron; @@ -32,6 +20,7 @@ struct ddr3_jedec_timings { u8 trc; u8 trrd; u8 tccd; + u8 tbst_int_interval; u8 tfaw; u8 trp; u8 twtr; @@ -43,30 +32,51 @@ struct ddr3_jedec_timings { u8 tckesr; u8 tcke; u8 trcd_int; + u8 tras_lockout; u8 tdal; + u8 bstlen; u16 tdll; u8 trp_ab; u16 tref; u8 trfc; + u16 tref_int; u8 tpdex; u8 txpdll; u8 txsnr; u16 txsr; u8 cksrx; u8 cksre; + u8 freq_chg_en; u16 zqcl; u16 zqinit; u8 zqcs; u8 ref_per_zq; + u8 zqcs_rotate; u8 aprebit; + u8 cmd_age_cnt; + u8 age_cnt; + u8 q_fullness; + u8 odt_rd_mapcs0; + u8 odt_wr_mapcs0; u8 wlmrd; u8 wldqsen; }; -void ddrmc_setup_iomux(void); +struct ddrmc_cr_setting { + u32 setting; + int cr_rnum; /* CR register ; -1 for last entry */ +}; + +struct ddrmc_phy_setting { + u32 setting; + int phy_rnum; /* PHY register ; -1 for last entry */ +}; + +void ddrmc_setup_iomux(const iomux_v3_cfg_t *pads, int pads_count); void ddrmc_phy_init(void); void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings, - struct ddrmc_lvl_info *lvl, - int col_diff, int row_diff); + struct ddrmc_cr_setting *board_cr_settings, + struct ddrmc_phy_setting *board_phy_settings, + int col_diff, int row_diff); #endif diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h index 436698588c..9758323433 100644 --- a/arch/arm/include/asm/arch-vf610/imx-regs.h +++ b/arch/arm/include/asm/arch-vf610/imx-regs.h @@ -148,7 +148,7 @@ #define DDRMC_CR18_TCKE(v) ((v) & 0x7) #define DDRMC_CR20_AP_EN (1 << 24) #define DDRMC_CR21_TRCD_INT(v) (((v) & 0xff) << 16) -#define DDRMC_CR21_TRAS_LOCKOUT (1 << 8) +#define DDRMC_CR21_TRAS_LOCKOUT(v) ((v) << 8) #define DDRMC_CR21_CCMAP_EN 1 #define DDRMC_CR22_TDAL(v) (((v) & 0x3f) << 16) #define DDRMC_CR23_BSTLEN(v) (((v) & 0x7) << 24) @@ -200,8 +200,8 @@ #define DDRMC_CR78_BUR_ON_FLY_BIT(v) ((v) & 0xf) #define DDRMC_CR79_CTLUPD_AREF(v) (((v) & 0x1) << 24) #define DDRMC_CR82_INT_MASK 0x10000000 -#define DDRMC_CR87_ODT_WR_MAPCS0 (1 << 24) -#define DDRMC_CR87_ODT_RD_MAPCS0 (1 << 16) +#define DDRMC_CR87_ODT_WR_MAPCS0(v) ((v) << 24) +#define DDRMC_CR87_ODT_RD_MAPCS0(v) ((v) << 16) #define DDRMC_CR88_TODTL_CMD(v) (((v) & 0x1f) << 16) #define DDRMC_CR89_AODT_RWSMCS(v) ((v) & 0xf) #define DDRMC_CR91_R2W_SMCSDL(v) (((v) & 0x7) << 16) diff --git a/arch/arm/include/asm/imx-common/boot_mode.h b/arch/arm/include/asm/imx-common/boot_mode.h index de0205c115..a8239f2f7a 100644 --- a/arch/arm/include/asm/imx-common/boot_mode.h +++ b/arch/arm/include/asm/imx-common/boot_mode.h @@ -9,6 +9,27 @@ #define MAKE_CFGVAL(cfg1, cfg2, cfg3, cfg4) \ ((cfg4) << 24) | ((cfg3) << 16) | ((cfg2) << 8) | (cfg1) +enum boot_device { + WEIM_NOR_BOOT, + ONE_NAND_BOOT, + PATA_BOOT, + SATA_BOOT, + I2C_BOOT, + SPI_NOR_BOOT, + SD1_BOOT, + SD2_BOOT, + SD3_BOOT, + SD4_BOOT, + MMC1_BOOT, + MMC2_BOOT, + MMC3_BOOT, + MMC4_BOOT, + NAND_BOOT, + QSPI_BOOT, + UNKNOWN_BOOT, + BOOT_DEV_NUM = UNKNOWN_BOOT, +}; + struct boot_mode { const char *name; unsigned cfg_val; diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h index 6954ee918e..5673fb4bc1 100644 --- a/arch/arm/include/asm/imx-common/sys_proto.h +++ b/arch/arm/include/asm/imx-common/sys_proto.h @@ -17,9 +17,12 @@ /* returns MXC_CPU_ value */ #define cpu_type(rev) (((rev) >> 12) & 0xff) +#define soc_type(rev) (((rev) >> 12) & 0xf0) /* both macros return/take MXC_CPU_ constants */ #define get_cpu_type() (cpu_type(get_cpu_rev())) +#define get_soc_type() (soc_type(get_cpu_rev())) #define is_cpu_type(cpu) (get_cpu_type() == cpu) +#define is_soc_type(soc) (get_soc_type() == soc) #define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)) @@ -32,6 +35,10 @@ u32 imx_ddr_size(void); void sdelay(unsigned long); void set_chipselect_size(int const); +void init_aips(void); +void init_src(void); +void imx_set_wdog_powerdown(bool enable); + /* * Initializes on-chip ethernet controllers. * to override, implement board_eth_init() diff --git a/arch/arm/include/asm/imx-common/syscounter.h b/arch/arm/include/asm/imx-common/syscounter.h new file mode 100644 index 0000000000..bdbe26ce35 --- /dev/null +++ b/arch/arm/include/asm/imx-common/syscounter.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_SYSTEM_COUNTER_H +#define _ASM_ARCH_SYSTEM_COUNTER_H + +/* System Counter */ +struct sctr_regs { + u32 cntcr; + u32 cntsr; + u32 cntcv1; + u32 cntcv2; + u32 resv1[4]; + u32 cntfid0; + u32 cntfid1; + u32 cntfid2; + u32 resv2[1001]; + u32 counterid[1]; +}; + +#define SC_CNTCR_ENABLE (1 << 0) +#define SC_CNTCR_HDBG (1 << 1) +#define SC_CNTCR_FREQ0 (1 << 8) +#define SC_CNTCR_FREQ1 (1 << 9) + +#endif diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index e72184bd94..d51be0b1d2 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -150,7 +150,6 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_INTELMOTE2 775 #define MACH_TYPE_TRIZEPS4 776 #define MACH_TYPE_PNX4008 782 -#define MACH_TYPE_CPUAT91 787 #define MACH_TYPE_IQ81340SC 799 #define MACH_TYPE_IQ81340MC 801 #define MACH_TYPE_MICRO9 811 @@ -197,7 +196,6 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_SMDK2412 1009 #define MACH_TYPE_SMDK2413 1022 #define MACH_TYPE_AML_M5900 1024 -#define MACH_TYPE_BALLOON3 1029 #define MACH_TYPE_ECBAT91 1072 #define MACH_TYPE_ONEARM 1075 #define MACH_TYPE_SMDK2443 1084 @@ -404,7 +402,6 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_IGEP0020 2344 #define MACH_TYPE_NUC932EVB 2356 #define MACH_TYPE_OPENRD_CLIENT 2361 -#define MACH_TYPE_U8500 2368 #define MACH_TYPE_MX51_EFIKASB 2370 #define MACH_TYPE_MARVELL_JASPER 2382 #define MACH_TYPE_FLINT 2383 @@ -976,7 +973,6 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_RHINO 3360 #define MACH_TYPE_ARMLEX4210 3361 #define MACH_TYPE_SWARCOEXTMODEM 3362 -#define MACH_TYPE_SNOWBALL 3363 #define MACH_TYPE_PCM049 3364 #define MACH_TYPE_VIGOR 3365 #define MACH_TYPE_OSLO_AMUNDSEN 3366 @@ -2768,18 +2764,6 @@ extern unsigned int __machine_arch_type; # define machine_is_pnx4008() (0) #endif -#ifdef CONFIG_MACH_CPUAT91 -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_CPUAT91 -# endif -# define machine_is_cpuat91() (machine_arch_type == MACH_TYPE_CPUAT91) -#else -# define machine_is_cpuat91() (0) -#endif - #ifdef CONFIG_MACH_IQ81340SC # ifdef machine_arch_type # undef machine_arch_type @@ -3332,18 +3316,6 @@ extern unsigned int __machine_arch_type; # define machine_is_aml_m5900() (0) #endif -#ifdef CONFIG_MACH_BALLOON3 -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_BALLOON3 -# endif -# define machine_is_balloon3() (machine_arch_type == MACH_TYPE_BALLOON3) -#else -# define machine_is_balloon3() (0) -#endif - #ifdef CONFIG_MACH_ECBAT91 # ifdef machine_arch_type # undef machine_arch_type @@ -5048,30 +5020,6 @@ extern unsigned int __machine_arch_type; # define machine_is_omap_zoom2() (0) #endif -#ifdef CONFIG_MACH_CPUAT9260 -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_CPUAT9260 -# endif -# define machine_is_cpuat9260() (machine_arch_type == MACH_TYPE_CPUAT9260) -#else -# define machine_is_cpuat9260() (0) -#endif - -#ifdef CONFIG_MACH_EUKREA_CPUIMX27 -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_EUKREA_CPUIMX27 -# endif -# define machine_is_eukrea_cpuimx27() (machine_arch_type == MACH_TYPE_EUKREA_CPUIMX27) -#else -# define machine_is_eukrea_cpuimx27() (0) -#endif - #ifdef CONFIG_MACH_ACS5K # ifdef machine_arch_type # undef machine_arch_type @@ -5804,18 +5752,6 @@ extern unsigned int __machine_arch_type; # define machine_is_openrd_client() (0) #endif -#ifdef CONFIG_MACH_U8500 -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_U8500 -# endif -# define machine_is_u8500() (machine_arch_type == MACH_TYPE_U8500) -#else -# define machine_is_u8500() (0) -#endif - #ifdef CONFIG_MACH_MX51_EFIKASB # ifdef machine_arch_type # undef machine_arch_type @@ -12668,18 +12604,6 @@ extern unsigned int __machine_arch_type; # define machine_is_swarcoextmodem() (0) #endif -#ifdef CONFIG_MACH_SNOWBALL -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_SNOWBALL -# endif -# define machine_is_snowball() (machine_arch_type == MACH_TYPE_SNOWBALL) -#else -# define machine_is_snowball() (0) -#endif - #ifdef CONFIG_MACH_PCM049 # ifdef machine_arch_type # undef machine_arch_type diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h index 43cc494683..ca3abd7d0b 100644 --- a/arch/arm/include/asm/u-boot.h +++ b/arch/arm/include/asm/u-boot.h @@ -20,27 +20,8 @@ #ifndef _U_BOOT_H_ #define _U_BOOT_H_ 1 -#ifdef CONFIG_SYS_GENERIC_BOARD /* Use the generic board which requires a unified bd_info */ #include <asm-generic/u-boot.h> -#else - -#ifndef __ASSEMBLY__ -typedef struct bd_info { - ulong bi_arch_number; /* unique id for this board */ - ulong bi_boot_params; /* where this board expects params */ - unsigned long bi_arm_freq; /* arm frequency */ - unsigned long bi_dsp_freq; /* dsp core frequency */ - unsigned long bi_ddr_freq; /* ddr frequency */ - struct /* RAM configuration */ - { - ulong start; - ulong size; - } bi_dram[CONFIG_NR_DRAM_BANKS]; -} bd_t; -#endif - -#endif /* !CONFIG_SYS_GENERIC_BOARD */ /* For image.h:image_check_target_arch() */ #ifndef CONFIG_ARM64 diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index f717103526..2bdfaba5b7 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -22,9 +22,6 @@ obj-y += relocate_64.o else obj-y += relocate.o endif -ifndef CONFIG_SYS_GENERIC_BOARD -obj-y += board.o -endif obj-$(CONFIG_CPU_V7M) += cmd_boot.o obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c deleted file mode 100644 index 37ea6e90ec..0000000000 --- a/arch/arm/lib/board.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * (C) Copyright 2002-2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * To match the U-Boot user interface on ARM platforms to the U-Boot - * standard (as on PPC platforms), some messages with debug character - * are removed from the default U-Boot build. - * - * Define DEBUG here if you want additional info as shown below - * printed upon startup: - * - * U-Boot code: 00F00000 -> 00F3C774 BSS: -> 00FC3274 - * IRQ Stack: 00ebff7c - * FIQ Stack: 00ebef7c - */ - -#include <common.h> -#include <command.h> -#include <environment.h> -#include <malloc.h> -#include <stdio_dev.h> -#include <version.h> -#include <net.h> -#include <serial.h> -#include <nand.h> -#include <onenand_uboot.h> -#include <mmc.h> -#include <scsi.h> -#include <status_led.h> -#include <libfdt.h> -#include <fdtdec.h> -#include <post.h> -#include <logbuff.h> -#include <asm/sections.h> - -#ifdef CONFIG_BITBANGMII -#include <miiphy.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -ulong monitor_flash_len; - -#ifdef CONFIG_HAS_DATAFLASH -extern int AT91F_DataflashInit(void); -extern void dataflash_print_info(void); -#endif - -#if defined(CONFIG_HARD_I2C) || \ - defined(CONFIG_SYS_I2C) -#include <i2c.h> -#endif - -/************************************************************************ - * Coloured LED functionality - ************************************************************************ - * May be supplied by boards if desired - */ -__weak void coloured_LED_init(void) {} -__weak void red_led_on(void) {} -__weak void red_led_off(void) {} -__weak void green_led_on(void) {} -__weak void green_led_off(void) {} -__weak void yellow_led_on(void) {} -__weak void yellow_led_off(void) {} -__weak void blue_led_on(void) {} -__weak void blue_led_off(void) {} - -/* - ************************************************************************ - * Init Utilities * - ************************************************************************ - * Some of this code should be moved into the core functions, - * or dropped completely, - * but let's get it working (again) first... - */ - -#if defined(CONFIG_ARM_DCC) && !defined(CONFIG_BAUDRATE) -#define CONFIG_BAUDRATE 115200 -#endif - -static int init_baudrate(void) -{ - gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); - return 0; -} - -static int display_banner(void) -{ - printf("\n\n%s\n\n", version_string); - debug("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n", - (ulong)&_start, - (ulong)&__bss_start, (ulong)&__bss_end); -#ifdef CONFIG_MODEM_SUPPORT - debug("Modem Support enabled\n"); -#endif -#ifdef CONFIG_USE_IRQ - debug("IRQ Stack: %08lx\n", IRQ_STACK_START); - debug("FIQ Stack: %08lx\n", FIQ_STACK_START); -#endif - - return (0); -} - -/* - * WARNING: this code looks "cleaner" than the PowerPC version, but - * has the disadvantage that you either get nothing, or everything. - * On PowerPC, you might see "DRAM: " before the system hangs - which - * gives a simple yet clear indication which part of the - * initialization if failing. - */ -static int display_dram_config(void) -{ - int i; - -#ifdef DEBUG - puts("RAM Configuration:\n"); - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start); - print_size(gd->bd->bi_dram[i].size, "\n"); - } -#else - ulong size = 0; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - size += gd->bd->bi_dram[i].size; - - puts("DRAM: "); - print_size(size, "\n"); -#endif - - return (0); -} - -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C) -static int init_func_i2c(void) -{ - puts("I2C: "); -#ifdef CONFIG_SYS_I2C - i2c_init_all(); -#else - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif - puts("ready\n"); - return (0); -} -#endif - -#if defined(CONFIG_CMD_PCI) || defined (CONFIG_PCI) -#include <pci.h> -static int arm_pci_init(void) -{ - pci_init(); - return 0; -} -#endif /* CONFIG_CMD_PCI || CONFIG_PCI */ - -/* - * Breathe some life into the board... - * - * Initialize a serial port as console, and carry out some hardware - * tests. - * - * The first part of initialization is running from Flash memory; - * its main purpose is to initialize the RAM so that we - * can relocate the monitor code to RAM. - */ - -/* - * All attempts to come up with a "common" initialization sequence - * that works for all boards and architectures failed: some of the - * requirements are just _too_ different. To get rid of the resulting - * mess of board dependent #ifdef'ed code we now make the whole - * initialization sequence configurable to the user. - * - * The requirements for any new initalization function is simple: it - * receives a pointer to the "global data" structure as it's only - * argument, and returns an integer return code, where 0 means - * "continue" and != 0 means "fatal error, hang the system". - */ -typedef int (init_fnc_t) (void); - -__weak void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = gd->ram_size; -} - -__weak int arch_cpu_init(void) -{ - return 0; -} - -__weak int power_init_board(void) -{ - return 0; -} - - /* Record the board_init_f() bootstage (after arch_cpu_init()) */ -static int mark_bootstage(void) -{ - bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); - - return 0; -} - -init_fnc_t *init_sequence[] = { - arch_cpu_init, /* basic arch cpu dependent setup */ - mark_bootstage, -#ifdef CONFIG_OF_CONTROL - fdtdec_check_fdt, -#endif -#if defined(CONFIG_BOARD_EARLY_INIT_F) - board_early_init_f, -#endif - timer_init, /* initialize timer */ -#ifdef CONFIG_BOARD_POSTCLK_INIT - board_postclk_init, -#endif -#ifdef CONFIG_FSL_ESDHC - get_clocks, -#endif - env_init, /* initialize environment */ - init_baudrate, /* initialze baudrate settings */ - serial_init, /* serial communications setup */ - console_init_f, /* stage 1 init of console */ - display_banner, /* say that we are here */ - print_cpuinfo, /* display cpu info (and speed) */ -#if defined(CONFIG_DISPLAY_BOARDINFO) - checkboard, /* display board info */ -#endif -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C) - init_func_i2c, -#endif - dram_init, /* configure available RAM banks */ - NULL, -}; - -void board_init_f(ulong bootflag) -{ - bd_t *bd; - init_fnc_t **init_fnc_ptr; - gd_t *id; - ulong addr, addr_sp; -#ifdef CONFIG_PRAM - ulong reg; -#endif - void *new_fdt = NULL; - size_t fdt_size = 0; - - memset((void *)gd, 0, sizeof(gd_t)); - - gd->mon_len = (ulong)&__bss_end - (ulong)_start; -#ifdef CONFIG_OF_EMBED - /* Get a pointer to the FDT */ - gd->fdt_blob = __dtb_dt_begin; -#elif defined CONFIG_OF_SEPARATE - /* FDT is at end of image */ - gd->fdt_blob = &_end; -#endif - /* Allow the early environment to override the fdt address */ - gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16, - (uintptr_t)gd->fdt_blob); - - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - if ((*init_fnc_ptr)() != 0) { - hang (); - } - } - -#ifdef CONFIG_OF_CONTROL - /* For now, put this check after the console is ready */ - if (fdtdec_prepare_fdt()) { - panic("** CONFIG_OF_CONTROL defined but no FDT - please see " - "doc/README.fdt-control"); - } -#endif - - debug("monitor len: %08lX\n", gd->mon_len); - /* - * Ram is setup, size stored in gd !! - */ - debug("ramsize: %08lX\n", gd->ram_size); -#if defined(CONFIG_SYS_MEM_TOP_HIDE) - /* - * Subtract specified amount of memory to hide so that it won't - * get "touched" at all by U-Boot. By fixing up gd->ram_size - * the Linux kernel should now get passed the now "corrected" - * memory size and won't touch it either. This should work - * for arch/ppc and arch/powerpc. Only Linux board ports in - * arch/powerpc with bootwrapper support, that recalculate the - * memory size from the SDRAM controller setup will have to - * get fixed. - */ - gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE; -#endif - - addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize(); - -#ifdef CONFIG_LOGBUFFER -#ifndef CONFIG_ALT_LB_ADDR - /* reserve kernel log buffer */ - addr -= (LOGBUFF_RESERVE); - debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, - addr); -#endif -#endif - -#ifdef CONFIG_PRAM - /* - * reserve protected RAM - */ - reg = getenv_ulong("pram", 10, CONFIG_PRAM); - addr -= (reg << 10); /* size is in kB */ - debug("Reserving %ldk for protected RAM at %08lx\n", reg, addr); -#endif /* CONFIG_PRAM */ - -#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) - /* reserve TLB table */ - gd->arch.tlb_size = PGTABLE_SIZE; - addr -= gd->arch.tlb_size; - - /* round down to next 64 kB limit */ - addr &= ~(0x10000 - 1); - - gd->arch.tlb_addr = addr; - debug("TLB table from %08lx to %08lx\n", addr, addr + gd->arch.tlb_size); -#endif - - /* round down to next 4 kB limit */ - addr &= ~(4096 - 1); - debug("Top of RAM usable for U-Boot at: %08lx\n", addr); - -#ifdef CONFIG_LCD -#ifdef CONFIG_FB_ADDR - gd->fb_base = CONFIG_FB_ADDR; -#else - /* reserve memory for LCD display (always full pages) */ - addr = lcd_setmem(addr); - gd->fb_base = addr; -#endif /* CONFIG_FB_ADDR */ -#endif /* CONFIG_LCD */ - - /* - * reserve memory for U-Boot code, data & bss - * round down to next 4 kB limit - */ - addr -= gd->mon_len; - addr &= ~(4096 - 1); - - debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr); - -#ifndef CONFIG_SPL_BUILD - /* - * reserve memory for malloc() arena - */ - addr_sp = addr - TOTAL_MALLOC_LEN; - debug("Reserving %dk for malloc() at: %08lx\n", - TOTAL_MALLOC_LEN >> 10, addr_sp); - /* - * (permanently) allocate a Board Info struct - * and a permanent copy of the "global" data - */ - addr_sp -= sizeof (bd_t); - bd = (bd_t *) addr_sp; - gd->bd = bd; - debug("Reserving %zu Bytes for Board Info at: %08lx\n", - sizeof (bd_t), addr_sp); - -#ifdef CONFIG_MACH_TYPE - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ -#endif - - addr_sp -= sizeof (gd_t); - id = (gd_t *) addr_sp; - debug("Reserving %zu Bytes for Global Data at: %08lx\n", - sizeof (gd_t), addr_sp); - -#if defined(CONFIG_OF_SEPARATE) && defined(CONFIG_OF_CONTROL) - /* - * If the device tree is sitting immediate above our image then we - * must relocate it. If it is embedded in the data section, then it - * will be relocated with other data. - */ - if (gd->fdt_blob) { - fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32); - - addr_sp -= fdt_size; - new_fdt = (void *)addr_sp; - debug("Reserving %zu Bytes for FDT at: %08lx\n", - fdt_size, addr_sp); - } -#endif - -#ifndef CONFIG_ARM64 - /* setup stackpointer for exeptions */ - gd->irq_sp = addr_sp; -#ifdef CONFIG_USE_IRQ - addr_sp -= (CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ); - debug("Reserving %zu Bytes for IRQ stack at: %08lx\n", - CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ, addr_sp); -#endif - /* leave 3 words for abort-stack */ - addr_sp -= 12; - - /* 8-byte alignment for ABI compliance */ - addr_sp &= ~0x07; -#else /* CONFIG_ARM64 */ - /* 16-byte alignment for ABI compliance */ - addr_sp &= ~0x0f; -#endif /* CONFIG_ARM64 */ -#else - addr_sp += 128; /* leave 32 words for abort-stack */ - gd->irq_sp = addr_sp; -#endif - - debug("New Stack Pointer is: %08lx\n", addr_sp); - -#ifdef CONFIG_POST - post_bootmode_init(); - post_run(NULL, POST_ROM | post_bootmode_get(0)); -#endif - - /* Ram ist board specific, so move it to board code ... */ - dram_init_banksize(); - display_dram_config(); /* and display it */ - - gd->relocaddr = addr; - gd->start_addr_sp = addr_sp; - gd->reloc_off = addr - (ulong)&_start; - debug("relocation Offset is: %08lx\n", gd->reloc_off); - if (new_fdt) { - memcpy(new_fdt, gd->fdt_blob, fdt_size); - gd->fdt_blob = new_fdt; - } - memcpy(id, (void *)gd, sizeof(gd_t)); -} - -#if !defined(CONFIG_SYS_NO_FLASH) -static char *failed = "*** failed ***\n"; -#endif - -/* - * Tell if it's OK to load the environment early in boot. - * - * If CONFIG_OF_CONFIG is defined, we'll check with the FDT to see - * if this is OK (defaulting to saying it's not OK). - * - * NOTE: Loading the environment early can be a bad idea if security is - * important, since no verification is done on the environment. - * - * @return 0 if environment should not be loaded, !=0 if it is ok to load - */ -static int should_load_env(void) -{ -#ifdef CONFIG_OF_CONTROL - return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 1); -#elif defined CONFIG_DELAY_ENVIRONMENT - return 0; -#else - return 1; -#endif -} - -#if defined(CONFIG_DISPLAY_BOARDINFO_LATE) && defined(CONFIG_OF_CONTROL) -static void display_fdt_model(const void *blob) -{ - const char *model; - - model = (char *)fdt_getprop(blob, 0, "model", NULL); - printf("Model: %s\n", model ? model : "<unknown>"); -} -#endif - -/************************************************************************ - * - * This is the next part if the initialization sequence: we are now - * running from RAM and have a "normal" C environment, i. e. global - * data can be written, BSS has been cleared, the stack size in not - * that critical any more, etc. - * - ************************************************************************ - */ - -void board_init_r(gd_t *id, ulong dest_addr) -{ - ulong malloc_start; -#if !defined(CONFIG_SYS_NO_FLASH) - ulong flash_size; -#endif - - gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ - bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r"); - - monitor_flash_len = (ulong)&__rel_dyn_end - (ulong)_start; - - /* Enable caches */ - enable_caches(); - - debug("monitor flash len: %08lX\n", monitor_flash_len); - board_init(); /* Setup chipselects */ - /* - * TODO: printing of the clock inforamtion of the board is now - * implemented as part of bdinfo command. Currently only support for - * davinci SOC's is added. Remove this check once all the board - * implement this. - */ -#ifdef CONFIG_CLOCKS - set_cpu_clk_info(); /* Setup clock information */ -#endif - serial_initialize(); - - debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr); - -#ifdef CONFIG_LOGBUFFER - logbuff_init_ptrs(); -#endif -#ifdef CONFIG_POST - post_output_backlog(); -#endif - - /* The Malloc area is immediately below the monitor copy in DRAM */ - malloc_start = dest_addr - TOTAL_MALLOC_LEN; - mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN); - -#ifdef CONFIG_ARCH_EARLY_INIT_R - arch_early_init_r(); -#endif - power_init_board(); - -#if !defined(CONFIG_SYS_NO_FLASH) - puts("Flash: "); - - flash_size = flash_init(); - if (flash_size > 0) { -# ifdef CONFIG_SYS_FLASH_CHECKSUM - print_size(flash_size, ""); - /* - * Compute and print flash CRC if flashchecksum is set to 'y' - * - * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX - */ - if (getenv_yesno("flashchecksum") == 1) { - printf(" CRC: %08X", crc32(0, - (const unsigned char *) CONFIG_SYS_FLASH_BASE, - flash_size)); - } - putc('\n'); -# else /* !CONFIG_SYS_FLASH_CHECKSUM */ - print_size(flash_size, "\n"); -# endif /* CONFIG_SYS_FLASH_CHECKSUM */ - } else { - puts(failed); - hang(); - } -#endif - -#if defined(CONFIG_CMD_NAND) - puts("NAND: "); - nand_init(); /* go init the NAND */ -#endif - -#if defined(CONFIG_CMD_ONENAND) - onenand_init(); -#endif - -#ifdef CONFIG_GENERIC_MMC - puts("MMC: "); - mmc_initialize(gd->bd); -#endif - -#ifdef CONFIG_CMD_SCSI - puts("SCSI: "); - scsi_init(); -#endif - -#ifdef CONFIG_HAS_DATAFLASH - AT91F_DataflashInit(); - dataflash_print_info(); -#endif - - /* initialize environment */ - if (should_load_env()) - env_relocate(); - else - set_default_env(NULL); - -#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) - arm_pci_init(); -#endif - - stdio_init(); /* get the devices list going. */ - - jumptable_init(); - -#if defined(CONFIG_API) - /* Initialize API */ - api_init(); -#endif - - console_init_r(); /* fully init console as a device */ - -#ifdef CONFIG_DISPLAY_BOARDINFO_LATE -# ifdef CONFIG_OF_CONTROL - /* Put this here so it appears on the LCD, now it is ready */ - display_fdt_model(gd->fdt_blob); -# else - checkboard(); -# endif -#endif - -#if defined(CONFIG_ARCH_MISC_INIT) - /* miscellaneous arch dependent initialisations */ - arch_misc_init(); -#endif -#if defined(CONFIG_MISC_INIT_R) - /* miscellaneous platform dependent initialisations */ - misc_init_r(); -#endif - - /* set up exceptions */ - interrupt_init(); - /* enable exceptions */ - enable_interrupts(); - - /* Initialize from environment */ - load_addr = getenv_ulong("loadaddr", 16, load_addr); - -#ifdef CONFIG_BOARD_LATE_INIT - board_late_init(); -#endif - -#ifdef CONFIG_BITBANGMII - bb_miiphy_init(); -#endif -#if defined(CONFIG_CMD_NET) - puts("Net: "); - eth_initialize(); -#if defined(CONFIG_RESET_PHY_R) - debug("Reset Ethernet PHY\n"); - reset_phy(); -#endif -#endif - -#ifdef CONFIG_POST - post_run(NULL, POST_RAM | post_bootmode_get(0)); -#endif - -#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER) - /* - * Export available size of memory for Linux, - * taking into account the protected RAM at top of memory - */ - { - ulong pram = 0; - uchar memsz[32]; - -#ifdef CONFIG_PRAM - pram = getenv_ulong("pram", 10, CONFIG_PRAM); -#endif -#ifdef CONFIG_LOGBUFFER -#ifndef CONFIG_ALT_LB_ADDR - /* Also take the logbuffer into account (pram is in kB) */ - pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024; -#endif -#endif - sprintf((char *)memsz, "%ldk", (gd->ram_size / 1024) - pram); - setenv("mem", (char *)memsz); - } -#endif - - /* main_loop() can return to retry autoboot, if so just run it again. */ - for (;;) { - main_loop(); - } - - /* NOTREACHED - no way out of command loop except booting */ -} diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index f9f148d496..fdaf328722 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -8,14 +8,6 @@ config TARGET_AT91RM9200EK bool "Atmel AT91RM9200 evaluation kit" select CPU_ARM920T -config TARGET_EB_CPUX9K2 - bool "Support eb_cpux9k2" - select CPU_ARM920T - -config TARGET_CPUAT91 - bool "Support cpuat91" - select CPU_ARM920T - config TARGET_AT91SAM9260EK bool "Atmel at91sam9260 reference board" select CPU_ARM926EJS @@ -51,10 +43,6 @@ config TARGET_PM9263 bool "Ronetix pm9263 board" select CPU_ARM926EJS -config TARGET_STAMP9G20 - bool "Support stamp9g20" - select CPU_ARM926EJS - config TARGET_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK board" select CPU_ARM926EJS @@ -103,22 +91,10 @@ config TARGET_SAMA5D4EK select CPU_V7 select SUPPORT_SPL -config TARGET_VL_MA2SC - bool "Support vl_ma2sc" - select CPU_ARM926EJS - config TARGET_MEESC bool "Support meesc" select CPU_ARM926EJS -config TARGET_OTC570 - bool "Support otc570" - select CPU_ARM926EJS - -config TARGET_CPU9260 - bool "Support cpu9260" - select CPU_ARM926EJS - config TARGET_CORVUS bool "Support corvus" select CPU_ARM926EJS @@ -151,15 +127,10 @@ source "board/atmel/sama5d3_xplained/Kconfig" source "board/atmel/sama5d3xek/Kconfig" source "board/atmel/sama5d4_xplained/Kconfig" source "board/atmel/sama5d4ek/Kconfig" -source "board/BuS/eb_cpux9k2/Kconfig" -source "board/eukrea/cpuat91/Kconfig" source "board/bluewater/snapper9260/Kconfig" -source "board/BuS/vl_ma2sc/Kconfig" source "board/calao/usb_a9263/Kconfig" source "board/egnite/ethernut5/Kconfig" source "board/esd/meesc/Kconfig" -source "board/esd/otc570/Kconfig" -source "board/eukrea/cpu9260/Kconfig" source "board/mini-box/picosam9g45/Kconfig" source "board/ronetix/pm9261/Kconfig" source "board/ronetix/pm9263/Kconfig" @@ -167,6 +138,5 @@ source "board/ronetix/pm9g45/Kconfig" source "board/siemens/corvus/Kconfig" source "board/siemens/taurus/Kconfig" source "board/siemens/smartweb/Kconfig" -source "board/taskit/stamp9g20/Kconfig" endif diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 681270ddd2..a8d3e2f230 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,50 +4,20 @@ choice prompt "DaVinci board select" optional -config TARGET_ENBW_CMC - bool "EnBW CMC board" - config TARGET_IPAM390 bool "IPAM390 board" select SUPPORT_SPL -config TARGET_DA830EVM - bool "DA830 EVM board" - config TARGET_DA850EVM bool "DA850 EVM board" select SUPPORT_SPL -config TARGET_OMAPL138_LCDK - bool "OMAPL138 LCDK" - select SUPPORT_SPL - -config TARGET_DAVINCI_DM355EVM - bool "DM355 EVM board" - -config TARGET_DAVINCI_DM355LEOPARD - bool "DM355 Leopard board" - -config TARGET_DAVINCI_DM365EVM - bool "DM365 EVM board" - -config TARGET_DAVINCI_DM6467EVM - bool "DM6467 EVM board" - -config TARGET_DAVINCI_DVEVM - bool "DVEVM board" - config TARGET_EA20 bool "EA20 board" -config TARGET_DAVINCI_SCHMOOGIE - bool "Schmoogie board" - -config TARGET_DAVINCI_SFFSDR - bool "SFFSDR board" - -config TARGET_DAVINCI_SONATA - bool "Sonata board" +config TARGET_OMAPL138_LCDK + bool "OMAPL138 LCDK" + select SUPPORT_SPL config TARGET_CALIMAIN bool "Calimain board" @@ -57,18 +27,9 @@ endchoice config SYS_SOC default "davinci" -source "board/enbw/enbw_cmc/Kconfig" source "board/Barix/ipam390/Kconfig" source "board/davinci/da8xxevm/Kconfig" -source "board/davinci/dm355evm/Kconfig" -source "board/davinci/dm355leopard/Kconfig" -source "board/davinci/dm365evm/Kconfig" -source "board/davinci/dm6467evm/Kconfig" -source "board/davinci/dvevm/Kconfig" source "board/davinci/ea20/Kconfig" -source "board/davinci/schmoogie/Kconfig" -source "board/davinci/sffsdr/Kconfig" -source "board/davinci/sonata/Kconfig" source "board/omicron/calimain/Kconfig" endif diff --git a/arch/arm/mach-davinci/cpu.c b/arch/arm/mach-davinci/cpu.c index ff61147757..74c3d5d936 100644 --- a/arch/arm/mach-davinci/cpu.c +++ b/arch/arm/mach-davinci/cpu.c @@ -28,8 +28,6 @@ DECLARE_GLOBAL_DATA_PTR; #define PLLC_PLLDIV8 0x170 #define PLLC_PLLDIV9 0x174 -#define BIT(x) (1 << (x)) - /* SOC-specific pll info */ #ifdef CONFIG_SOC_DM355 #define ARM_PLLDIV PLLC_PLLDIV1 diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 1c6baa14b2..18eadf545f 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -1661,6 +1661,9 @@ unsigned long get_mmc_clk(int dev_index) { enum periph_id id; + if (cpu_is_exynos4()) + return exynos4_get_mmc_clk(dev_index); + switch (dev_index) { case 0: id = PERIPH_ID_SDMMC0; @@ -1679,12 +1682,7 @@ unsigned long get_mmc_clk(int dev_index) return -1; } - if (cpu_is_exynos5()) - return clock_get_periph_rate(id); - else if (cpu_is_exynos4()) - return exynos4_get_mmc_clk(dev_index); - - return 0; + return clock_get_periph_rate(id); } void set_mmc_clk(int dev_index, unsigned int div) diff --git a/arch/arm/mach-keystone/include/mach/clock_defs.h b/arch/arm/mach-keystone/include/mach/clock_defs.h index 8ad371f43d..f8d61d6ef1 100644 --- a/arch/arm/mach-keystone/include/mach/clock_defs.h +++ b/arch/arm/mach-keystone/include/mach/clock_defs.h @@ -11,8 +11,6 @@ #include <asm/arch/hardware.h> -#define BIT(x) (1 << (x)) - /* PLL Control Registers */ struct pllctl_regs { u32 ctl; /* 00 */ diff --git a/arch/arm/mach-keystone/include/mach/hardware.h b/arch/arm/mach-keystone/include/mach/hardware.h index 53f28ec8da..f98a24eb57 100644 --- a/arch/arm/mach-keystone/include/mach/hardware.h +++ b/arch/arm/mach-keystone/include/mach/hardware.h @@ -24,8 +24,6 @@ typedef volatile unsigned int *dv_reg_p; #endif -#define BIT(x) (1 << (x)) - #define KS2_DDRPHY_PIR_OFFSET 0x04 #define KS2_DDRPHY_PGCR0_OFFSET 0x08 #define KS2_DDRPHY_PGCR1_OFFSET 0x0C diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 1261885dad..aab5d19b5f 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -4,15 +4,6 @@ choice prompt "Marvell Kirkwood board select" optional -config TARGET_OPENRD - bool "Marvell OpenRD Board" - -config TARGET_MV88F6281GTW_GE - bool "MV88f6281GTW_GE Board" - -config TARGET_RD6281A - bool "RD6281A Board" - config TARGET_DREAMPLUG bool "DreamPlug Board" @@ -34,9 +25,6 @@ config TARGET_DNS325 config TARGET_ICONNECT bool "iconnect Board" -config TARGET_TK71 - bool "TK71 Board" - config TARGET_KM_KIRKWOOD bool "KM_KIRKWOOD Board" @@ -46,9 +34,6 @@ config TARGET_NET2BIG_V2 config TARGET_NETSPACE_V2 bool "LaCie netspace_v2 Board" -config TARGET_WIRELESS_SPACE - bool "LaCie Wireless_space Board" - config TARGET_IB62X0 bool "ib62x0 Board" @@ -66,9 +51,6 @@ endchoice config SYS_SOC default "kirkwood" -source "board/Marvell/openrd/Kconfig" -source "board/Marvell/mv88f6281gtw_ge/Kconfig" -source "board/Marvell/rd6281a/Kconfig" source "board/Marvell/dreamplug/Kconfig" source "board/Marvell/guruplug/Kconfig" source "board/Marvell/sheevaplug/Kconfig" @@ -76,11 +58,9 @@ source "board/buffalo/lsxl/Kconfig" source "board/cloudengines/pogo_e02/Kconfig" source "board/d-link/dns325/Kconfig" source "board/iomega/iconnect/Kconfig" -source "board/karo/tk71/Kconfig" source "board/keymile/km_arm/Kconfig" source "board/LaCie/net2big_v2/Kconfig" source "board/LaCie/netspace_v2/Kconfig" -source "board/LaCie/wireless_space/Kconfig" source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig" source "board/Seagate/goflexhome/Kconfig" diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index ea83e21d43..efd4d04ea8 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -214,32 +214,40 @@ static void setup_usb_phys(void) int arch_cpu_init(void) { -#ifndef CONFIG_SPL_BUILD +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_ARMADA_38X) + /* + * Only with disabled MMU its possible to switch the base + * register address on Armada 38x. Without this the SDRAM + * located at >= 0x4000.0000 is also not accessible, as its + * still locked to cache. + */ + mmu_disable(); +#endif + + /* Linux expects the internal registers to be at 0xf1000000 */ + writel(SOC_REGS_PHY_BASE, INTREG_BASE_ADDR_REG); + set_cbar(SOC_REGS_PHY_BASE + 0xC000); + +#if !defined(CONFIG_SPL_BUILD) + /* + * From this stage on, the SoC detection is working. As we have + * configured the internal register base to the value used + * in the macros / defines in the U-Boot header (soc.h). + */ if (mvebu_soc_family() == MVEBU_SOC_A38X) { struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE; /* - * Only with disabled MMU its possible to switch the base - * register address on Armada 38x. Without this the SDRAM - * located at >= 0x4000.0000 is also not accessible, as its - * still locked to cache. - * - * So to fully release / unlock this area from cache, we need - * to first flush all caches, then disable the MMU and - * disable the L2 cache. + * To fully release / unlock this area from cache, we need + * to flush all caches and disable the L2 cache. */ icache_disable(); dcache_disable(); - mmu_disable(); clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); } #endif - /* Linux expects the internal registers to be at 0xf1000000 */ - writel(SOC_REGS_PHY_BASE, INTREG_BASE_ADDR_REG); - set_cbar(SOC_REGS_PHY_BASE + 0xC000); - /* * We need to call mvebu_mbus_probe() before calling * update_sdram_window_sizes() as it disables all previously diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index a8a6b27d80..02c21bcded 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -11,8 +11,6 @@ #ifndef _MVEBU_SOC_H #define _MVEBU_SOC_H -#define BIT(x) (1 << (x)) - #define SOC_MV78460_ID 0x7846 #define SOC_88F6810_ID 0x6810 #define SOC_88F6820_ID 0x6820 diff --git a/arch/arm/mach-mvebu/timer.c b/arch/arm/mach-mvebu/timer.c index c516c419ed..5449a8926c 100644 --- a/arch/arm/mach-mvebu/timer.c +++ b/arch/arm/mach-mvebu/timer.c @@ -41,7 +41,7 @@ #define timestamp gd->arch.tbl #define lastdec gd->arch.lastinc -static int init_done; +static int init_done __attribute__((section(".data"))) = 0; /* Timer reload and current value registers */ struct kwtmr_val { diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig deleted file mode 100644 index ba72a4105d..0000000000 --- a/arch/arm/mach-nomadik/Kconfig +++ /dev/null @@ -1,17 +0,0 @@ -if ARCH_NOMADIK - -choice - prompt "Nomadik board select" - optional - -config NOMADIK_NHK8815 - bool "ST 8815 Nomadik Hardware Kit" - -endchoice - -config SYS_SOC - default "nomadik" - -source "board/st/nhk8815/Kconfig" - -endif diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile deleted file mode 100644 index cdf1345d58..0000000000 --- a/arch/arm/mach-nomadik/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = timer.o gpio.o -obj-y += reset.o diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c deleted file mode 100644 index eff5b2b75e..0000000000 --- a/arch/arm/mach-nomadik/gpio.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * (C) Copyright 2009 Alessandro Rubini - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/gpio.h> - -static unsigned long gpio_base[4] = { - NOMADIK_GPIO0_BASE, - NOMADIK_GPIO1_BASE, - NOMADIK_GPIO2_BASE, - NOMADIK_GPIO3_BASE -}; - -enum gpio_registers { - GPIO_DAT = 0x00, /* data register */ - GPIO_DATS = 0x04, /* data set */ - GPIO_DATC = 0x08, /* data clear */ - GPIO_PDIS = 0x0c, /* pull disable */ - GPIO_DIR = 0x10, /* direction */ - GPIO_DIRS = 0x14, /* direction set */ - GPIO_DIRC = 0x18, /* direction clear */ - GPIO_AFSLA = 0x20, /* alternate function select A */ - GPIO_AFSLB = 0x24, /* alternate function select B */ -}; - -static inline unsigned long gpio_to_base(int gpio) -{ - return gpio_base[gpio / 32]; -} - -static inline u32 gpio_to_bit(int gpio) -{ - return 1 << (gpio & 0x1f); -} - -void nmk_gpio_af(int gpio, int alternate_function) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - u32 afunc, bfunc; - - /* alternate function is 0..3, with one bit per register */ - afunc = readl(base + GPIO_AFSLA) & ~bit; - bfunc = readl(base + GPIO_AFSLB) & ~bit; - if (alternate_function & 1) afunc |= bit; - if (alternate_function & 2) bfunc |= bit; - writel(afunc, base + GPIO_AFSLA); - writel(bfunc, base + GPIO_AFSLB); -} - -void nmk_gpio_dir(int gpio, int dir) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - - if (dir) - writel(bit, base + GPIO_DIRS); - else - writel(bit, base + GPIO_DIRC); -} - -void nmk_gpio_set(int gpio, int val) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - - if (val) - writel(bit, base + GPIO_DATS); - else - writel(bit, base + GPIO_DATC); -} - -int nmk_gpio_get(int gpio) -{ - unsigned long base = gpio_to_base(gpio); - u32 bit = gpio_to_bit(gpio); - - return readl(base + GPIO_DAT) & bit; -} diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h deleted file mode 100644 index 311758ae1a..0000000000 --- a/arch/arm/mach-nomadik/include/mach/gpio.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * (C) Copyright 2009 Alessandro Rubini - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __NMK_GPIO_H__ -#define __NMK_GPIO_H__ - -/* - * These functions are called from the soft-i2c driver, but - * are also used by board files to set output bits. - */ - -enum nmk_af { /* alternate function settings */ - GPIO_GPIO = 0, - GPIO_ALT_A, - GPIO_ALT_B, - GPIO_ALT_C -}; - -extern void nmk_gpio_af(int gpio, int alternate_function); -extern void nmk_gpio_dir(int gpio, int dir); -extern void nmk_gpio_set(int gpio, int val); -extern int nmk_gpio_get(int gpio); - -#endif /* __NMK_GPIO_H__ */ diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h deleted file mode 100644 index f89f242247..0000000000 --- a/arch/arm/mach-nomadik/include/mach/mtu.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * (C) Copyright 2009 Alessandro Rubini - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __ASM_ARCH_MTU_H -#define __ASM_ARCH_MTU_H - -/* - * The MTU device hosts four different counters, with 4 set of - * registers. These are register names. - */ - -#define MTU_IMSC 0x00 /* Interrupt mask set/clear */ -#define MTU_RIS 0x04 /* Raw interrupt status */ -#define MTU_MIS 0x08 /* Masked interrupt status */ -#define MTU_ICR 0x0C /* Interrupt clear register */ - -/* per-timer registers take 0..3 as argument */ -#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ -#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ -#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ -#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ - -/* bits for the control register */ -#define MTU_CRn_ENA 0x80 -#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ -#define MTU_CRn_PRESCALE_MASK 0x0c -#define MTU_CRn_PRESCALE_1 0x00 -#define MTU_CRn_PRESCALE_16 0x04 -#define MTU_CRn_PRESCALE_256 0x08 -#define MTU_CRn_32BITS 0x02 -#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ - -/* Other registers are usual amba/primecell registers, currently not used */ -#define MTU_ITCR 0xff0 -#define MTU_ITOP 0xff4 - -#define MTU_PERIPH_ID0 0xfe0 -#define MTU_PERIPH_ID1 0xfe4 -#define MTU_PERIPH_ID2 0xfe8 -#define MTU_PERIPH_ID3 0xfeC - -#define MTU_PCELL0 0xff0 -#define MTU_PCELL1 0xff4 -#define MTU_PCELL2 0xff8 -#define MTU_PCELL3 0xffC - -#endif /* __ASM_ARCH_MTU_H */ diff --git a/arch/arm/mach-nomadik/reset.S b/arch/arm/mach-nomadik/reset.S deleted file mode 100644 index ec954726ae..0000000000 --- a/arch/arm/mach-nomadik/reset.S +++ /dev/null @@ -1,14 +0,0 @@ -#include <config.h> -/* - * Processor reset for Nomadik - */ - - .align 5 -.globl reset_cpu -reset_cpu: - ldr r0, =NOMADIK_SRC_BASE /* System and Reset Controller */ - ldr r1, =0x1 - str r1, [r0, #0x18] - -_loop_forever: - b _loop_forever diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c deleted file mode 100644 index 775d0b7488..0000000000 --- a/arch/arm/mach-nomadik/timer.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * (C) Copyright 2009 Alessandro Rubini - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/mtu.h> - -/* - * The timer is a decrementer, we'll left it free running at 2.4MHz. - * We have 2.4 ticks per microsecond and an overflow in almost 30min - */ -#define TIMER_CLOCK (24 * 100 * 1000) -#define COUNT_TO_USEC(x) ((x) * 5 / 12) /* overflows at 6min */ -#define USEC_TO_COUNT(x) ((x) * 12 / 5) /* overflows at 6min */ -#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) -#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) - -/* macro to read the decrementing 32 bit timer as an increasing count */ -#define READ_TIMER() (0 - readl(CONFIG_SYS_TIMERBASE + MTU_VAL(0))) - -/* Configure a free-running, auto-wrap counter with no prescaler */ -int timer_init(void) -{ - ulong val; - - writel(MTU_CRn_ENA | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS, - CONFIG_SYS_TIMERBASE + MTU_CR(0)); - - /* Reset the timer */ - writel(0, CONFIG_SYS_TIMERBASE + MTU_LR(0)); - /* - * The load-register isn't really immediate: it changes on clock - * edges, so we must wait for our newly-written value to appear. - * Since we might miss reading 0, wait for any change in value. - */ - val = READ_TIMER(); - while (READ_TIMER() == val) - ; - - return 0; -} - -/* Return how many HZ passed since "base" */ -ulong get_timer(ulong base) -{ - return TICKS_TO_HZ(READ_TIMER()) - base; -} - -/* Delay x useconds */ -void __udelay(unsigned long usec) -{ - ulong ini, end; - - ini = READ_TIMER(); - end = ini + USEC_TO_COUNT(usec); - while ((signed)(end - READ_TIMER()) > 0) - ; -} - -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -ulong get_tbclk(void) -{ - return CONFIG_SYS_HZ; -} diff --git a/arch/arm/mach-rockchip/board-spl.c b/arch/arm/mach-rockchip/board-spl.c index a241d965b9..28c3949b75 100644 --- a/arch/arm/mach-rockchip/board-spl.c +++ b/arch/arm/mach-rockchip/board-spl.c @@ -217,6 +217,13 @@ void board_init_f(ulong dummy) debug("DRAM init failed: %d\n", ret); return; } + + /* + * Now that DRAM is initialized setup base pointer for simple malloc + * into RAM. + */ + gd->malloc_base = CONFIG_SPL_STACK_R_ADDR; + gd->malloc_ptr = 0; } static int setup_led(void) diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 089280a91d..a413ea4d1b 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -50,8 +50,8 @@ config SYS_SOC default "socfpga" config SYS_CONFIG_NAME - default "socfpga_arria5" if TARGET_SOCFPGA_ARRIA5_SOCDK - default "socfpga_cyclone5" if TARGET_SOCFPGA_CYCLONE5_SOCDK + default "socfpga_arria5_socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK + default "socfpga_cyclone5_socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK default "socfpga_de0_nano_soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO default "socfpga_mcvevk" if TARGET_SOCFPGA_DENX_MCVEVK default "socfpga_sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index f9dfcd0411..f75c6c664a 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -461,6 +461,11 @@ void reset_cmplx_set_enable(int cpu, int which, int reset) writel(mask, &clkrst->crc_cpu_cmplx_clr); } +unsigned int __weak clk_m_get_rate(unsigned int parent_rate) +{ + return parent_rate; +} + unsigned clock_get_rate(enum clock_id clkid) { struct clk_pll *pll; @@ -472,6 +477,9 @@ unsigned clock_get_rate(enum clock_id clkid) if (clkid == CLOCK_ID_OSC) return parent_rate; + if (clkid == CLOCK_ID_CLK_M) + return clk_m_get_rate(parent_rate); + pll = get_pll(clkid); if (!pll) return 0; @@ -483,7 +491,16 @@ unsigned clock_get_rate(enum clock_id clkid) * PLLU uses p_mask/p_shift for VCO on all but T210, * T210 uses normal DIVP. Handled in pllinfo table. */ - divm <<= (base >> pllinfo->p_shift) & pllinfo->p_mask; +#ifdef CONFIG_TEGRA210 + /* + * PLLP's primary output (pllP_out0) on T210 is the VCO, and divp is + * not applied. pllP_out2 does have divp applied. All other pllP_outN + * are divided down from pllP_out0. We only support pllP_out0 in + * U-Boot at the time of writing this comment. + */ + if (clkid != CLOCK_ID_PERIPH) +#endif + divm <<= (base >> pllinfo->p_shift) & pllinfo->p_mask; do_div(rate, divm); return rate; } @@ -613,8 +630,10 @@ void clock_init(void) pll_rate[CLOCK_ID_XCPU] = clock_get_rate(CLOCK_ID_XCPU); pll_rate[CLOCK_ID_SFROM32KHZ] = 32768; pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC); + pll_rate[CLOCK_ID_CLK_M] = clock_get_rate(CLOCK_ID_CLK_M); debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]); + debug("CLKM = %d\n", pll_rate[CLOCK_ID_CLK_M]); debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]); debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]); debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]); diff --git a/arch/arm/mach-tegra/tegra114/clock.c b/arch/arm/mach-tegra/tegra114/clock.c index 5e805a7baf..e6ef873c8d 100644 --- a/arch/arm/mach-tegra/tegra114/clock.c +++ b/arch/arm/mach-tegra/tegra114/clock.c @@ -629,6 +629,11 @@ void clock_early_init(void) tegra30_set_up_pllp(); + /* clear IDDQ before accessing any other PLLC registers */ + pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL]; + clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, PLLC_IDDQ); + udelay(2); + /* * PLLC output frequency set to 600Mhz * PLLD output frequency set to 925Mhz @@ -679,8 +684,8 @@ void arch_timer_init(void) struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE; u32 freq, val; - freq = clock_get_rate(CLOCK_ID_OSC); - debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq); + freq = clock_get_rate(CLOCK_ID_CLK_M); + debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq); /* ARM CNTFRQ */ asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq)); diff --git a/arch/arm/mach-tegra/tegra124/clock.c b/arch/arm/mach-tegra/tegra124/clock.c index 61e8ab7053..1e71146236 100644 --- a/arch/arm/mach-tegra/tegra124/clock.c +++ b/arch/arm/mach-tegra/tegra124/clock.c @@ -809,6 +809,11 @@ void clock_early_init(void) tegra30_set_up_pllp(); + /* clear IDDQ before accessing any other PLLC registers */ + pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL]; + clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, PLLC_IDDQ); + udelay(2); + /* * PLLC output frequency set to 600Mhz * PLLD output frequency set to 925Mhz @@ -859,8 +864,8 @@ void arch_timer_init(void) struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE; u32 freq, val; - freq = clock_get_rate(CLOCK_ID_OSC); - debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq); + freq = clock_get_rate(CLOCK_ID_CLK_M); + debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq); /* ARM CNTFRQ */ asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq)); diff --git a/arch/arm/mach-tegra/tegra210/Kconfig b/arch/arm/mach-tegra/tegra210/Kconfig index bd34db7117..b07363a4c3 100644 --- a/arch/arm/mach-tegra/tegra210/Kconfig +++ b/arch/arm/mach-tegra/tegra210/Kconfig @@ -18,6 +18,14 @@ config TARGET_P2371_0000 HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, a GPIO expansion header, and an analog audio jack. +config TARGET_P2371_2180 + bool "NVIDIA Tegra210 P2371-2180 board" + help + P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The + combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB + micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and + two GPIO expansion headers. + config TARGET_P2571 bool "NVIDIA Tegra210 P2571 base board" help @@ -30,6 +38,7 @@ config SYS_SOC source "board/nvidia/e2220-1170/Kconfig" source "board/nvidia/p2371-0000/Kconfig" +source "board/nvidia/p2371-2180/Kconfig" source "board/nvidia/p2571/Kconfig" endif diff --git a/arch/arm/mach-tegra/tegra210/clock.c b/arch/arm/mach-tegra/tegra210/clock.c index 830a33ffc9..6d75d371cb 100644 --- a/arch/arm/mach-tegra/tegra210/clock.c +++ b/arch/arm/mach-tegra/tegra210/clock.c @@ -998,18 +998,27 @@ void clock_early_init(void) udelay(2); } +unsigned int clk_m_get_rate(unsigned parent_rate) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 value, div; + + value = readl(&clkrst->crc_spare_reg0); + div = ((value >> 2) & 0x3) + 1; + + return parent_rate / div; +} + void arch_timer_init(void) { struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE; u32 freq, val; - freq = clock_get_rate(CLOCK_ID_OSC); - debug("%s: osc freq is %dHz [0x%08X]\n", __func__, freq, freq); + freq = clock_get_rate(CLOCK_ID_CLK_M); + debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq); - /* ARM CNTFRQ */ -#ifndef CONFIG_ARM64 - asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq)); -#endif + if (current_el() == 3) + asm("msr cntfrq_el0, %0\n" : : "r" (freq)); /* Only Tegra114+ has the System Counter regs */ debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq); diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 7b49ad3b49..22ab798b96 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -6,49 +6,68 @@ config SYS_CONFIG_NAME config UNIPHIER_SMP bool -choice - prompt "UniPhier SoC select" - default MACH_PH1_PRO4 - -config MACH_PH1_SLD3 - bool "PH1-sLD3" +config ARCH_UNIPHIER_PH1_SLD3 + bool "UniPhier PH1-sLD3 SoC" select UNIPHIER_SMP + help + This enables support for UniPhier PH1-sLD3 SoC. -config MACH_PH1_LD4 - bool "PH1-LD4" +config ARCH_UNIPHIER_PH1_LD4 + bool "UniPhier PH1-LD4 SoC" + depends on !ARCH_UNIPHIER_PH1_SLD3 + help + This enables support for UniPhier PH1-LD4 SoC. -config MACH_PH1_PRO4 - bool "PH1-Pro4" +config ARCH_UNIPHIER_PH1_PRO4 + bool "UniPhier PH1-Pro4 SoC" select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 + help + This enables support for UniPhier PH1-Pro4 SoC. -config MACH_PH1_SLD8 - bool "PH1-sLD8" - -endchoice +config ARCH_UNIPHIER_PH1_SLD8 + bool "UniPhier PH1-sLD8 SoC" + depends on !ARCH_UNIPHIER_PH1_SLD3 + help + This enables support for UniPhier PH1-sLD8 SoC. -choice - prompt "UniPhier Support Card select" - optional +config ARCH_UNIPHIER_PH1_PRO5 + bool "UniPhier PH1-Pro5 SoC" + select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 + help + This enables support for UniPhier PH1-Pro5 SoC. -config PFC_MICRO_SUPPORT_CARD - bool "Support card with PFC CPLD" +config ARCH_UNIPHIER_PROXSTREAM2 + bool "UniPhier ProXstream2 SoC" + select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 help - This option provides support for the expansion board with PFC - original address mapping. + This enables support for UniPhier ProXstream2 SoC. - Say Y to use the on-board UART, Ether, LED devices. +config ARCH_UNIPHIER_PH1_LD6B + bool "UniPhier PH1-LD6b SoC" + select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 + help + This enables support for UniPhier PH1-LD6b SoC. -config DCC_MICRO_SUPPORT_CARD - bool "Support card with DCC CPLD" +config MICRO_SUPPORT_CARD + bool "Use Micro Support Card" help - This option provides support for the expansion board with DCC- - arranged address mapping that is compatible with legacy UniPhier - reference boards. + This option provides support for the expansion board, available + on some UniPhier reference boards. Say Y to use the on-board UART, Ether, LED devices. -endchoice - config CMD_PINMON bool "Enable boot mode pins monitor command" default y @@ -63,22 +82,4 @@ config CMD_DDRPHY_DUMP The command "ddrphy" shows the resulting parameters of DDR PHY training; it is useful for the evaluation of DDR PHY training. -choice - prompt "DDR3 Frequency select" - -config DDR_FREQ_1600 - bool "DDR3 1600" - depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_PRO4 - -config DDR_FREQ_1333 - bool "DDR3 1333" - depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_SLD8 - -endchoice - -config DDR_FREQ - int - default 1333 if DDR_FREQ_1333 - default 1600 if DDR_FREQ_1600 - endif diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 103db6d7dc..b597a1352c 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -6,9 +6,12 @@ ifdef CONFIG_SPL_BUILD obj-y += lowlevel_init.o obj-y += init_page_table.o -obj-y += spl.o -obj-y += memconf.o -obj-y += ddrphy_training.o +obj-y += boards.o + +obj-y += init/ bcu/ memconf/ pll/ early-clk/ early-pinctrl/ umc/ ddrphy/ +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/ + +obj-$(CONFIG_DEBUG_LL) += debug_ll.o else @@ -25,14 +28,12 @@ obj-y += cache_uniphier.o obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o +obj-y += pinctrl/ clk/ + endif obj-y += timer.o +obj-y += soc_info.o +obj-y += boot-mode/ -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o - -obj-$(CONFIG_MACH_PH1_SLD3) += ph1-sld3/ -obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ -obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/ -obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/ +obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o diff --git a/arch/arm/mach-uniphier/bcu/Makefile b/arch/arm/mach-uniphier/bcu/Makefile new file mode 100644 index 0000000000..5b95bdad95 --- /dev/null +++ b/arch/arm/mach-uniphier/bcu/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += bcu-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += bcu-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += bcu-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c b/arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c index a7bc15e7e0..e9d3761fde 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c +++ b/arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c @@ -4,13 +4,13 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> #include <linux/io.h> #include <mach/bcu-regs.h> +#include <mach/init.h> #define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) -void bcu_init(void) +int ph1_ld4_bcu_init(const struct uniphier_board_data *bd) { int shift; @@ -21,7 +21,7 @@ void bcu_init(void) writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */ /* Specify DDR channel */ - shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; + shift = (bd->dram_ch1_base - bd->dram_ch0_base) / 0x04000000 * 4; writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ shift -= 32; @@ -29,4 +29,6 @@ void bcu_init(void) shift -= 32; writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c b/arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c index ccc6897d0a..cb6f862721 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c +++ b/arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c @@ -4,13 +4,13 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> #include <linux/io.h> #include <mach/bcu-regs.h> +#include <mach/init.h> #define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) -void bcu_init(void) +int ph1_sld3_bcu_init(const struct uniphier_board_data *bd) { int shift; @@ -25,7 +25,7 @@ void bcu_init(void) writel(0x24440000, BCSCR5); /* Specify DDR channel */ - shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; + shift = (bd->dram_ch1_base - bd->dram_ch0_base) / 0x04000000 * 4; writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ shift -= 32; @@ -33,4 +33,6 @@ void bcu_init(void) shift -= 32; writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ + + return 0; } diff --git a/arch/arm/mach-uniphier/board_common.c b/arch/arm/mach-uniphier/board_common.c index 5f2d5f6f5b..198004b59b 100644 --- a/arch/arm/mach-uniphier/board_common.c +++ b/arch/arm/mach-uniphier/board_common.c @@ -1,32 +1,15 @@ /* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> -#include <mach/led.h> +#include <mach/micro-support-card.h> -/* - * Routine: board_init - * Description: Early hardware init. - */ int board_init(void) { - led_write(U, B, O, O); + led_puts("Uboo"); return 0; } - -#if CONFIG_NR_DRAM_BANKS >= 2 -void dram_init_banksize(void) -{ - DECLARE_GLOBAL_DATA_PTR; - - gd->bd->bi_dram[0].start = CONFIG_SDRAM0_BASE; - gd->bd->bi_dram[0].size = CONFIG_SDRAM0_SIZE; - gd->bd->bi_dram[1].start = CONFIG_SDRAM1_BASE; - gd->bd->bi_dram[1].size = CONFIG_SDRAM1_SIZE; -} -#endif diff --git a/arch/arm/mach-uniphier/board_early_init_f.c b/arch/arm/mach-uniphier/board_early_init_f.c index 7108740408..5e0d246ce4 100644 --- a/arch/arm/mach-uniphier/board_early_init_f.c +++ b/arch/arm/mach-uniphier/board_early_init_f.c @@ -1,27 +1,72 @@ /* - * Copyright (C) 2012-2015 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ -#include <mach/led.h> -#include <mach/board.h> - -void pin_init(void); -void clkrst_init(void); +#include <mach/init.h> +#include <mach/micro-support-card.h> +#include <mach/soc_info.h> int board_early_init_f(void) { - led_write(U, 0, , ); - - pin_init(); - - led_write(U, 1, , ); + led_puts("U0"); - clkrst_init(); + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + ph1_sld3_pin_init(); + led_puts("U1"); + ph1_ld4_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + case SOC_UNIPHIER_PH1_LD4: + ph1_ld4_pin_init(); + led_puts("U1"); + ph1_ld4_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + case SOC_UNIPHIER_PH1_PRO4: + ph1_pro4_pin_init(); + led_puts("U1"); + ph1_pro4_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_SLD8: + ph1_sld8_pin_init(); + led_puts("U1"); + ph1_ld4_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_pin_init(); + led_puts("U1"); + ph1_pro5_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + case SOC_UNIPHIER_PROXSTREAM2: + proxstream2_pin_init(); + led_puts("U1"); + proxstream2_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PH1_LD6B: + ph1_ld6b_pin_init(); + led_puts("U1"); + proxstream2_clk_init(); + break; +#endif + default: + break; + } - led_write(U, 2, , ); + led_puts("U2"); return 0; } diff --git a/arch/arm/mach-uniphier/board_early_init_r.c b/arch/arm/mach-uniphier/board_early_init_r.c index 579fe70463..28c7f82228 100644 --- a/arch/arm/mach-uniphier/board_early_init_r.c +++ b/arch/arm/mach-uniphier/board_early_init_r.c @@ -1,15 +1,14 @@ /* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> -#include <mach/board.h> +#include <mach/micro-support-card.h> int board_early_init_r(void) { - uniphier_board_late_init(); + support_card_late_init(); return 0; } diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c new file mode 100644 index 0000000000..812c58ff96 --- /dev/null +++ b/arch/arm/mach-uniphier/boards.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <libfdt.h> +#include <linux/kernel.h> +#include <mach/init.h> + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) +static const struct uniphier_board_data ph1_sld3_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x20000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xc0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 16, + .dram_ch2_base = 0xc0000000, + .dram_ch2_size = 0x10000000, + .dram_ch2_width = 16, + .dram_freq = 1600, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) +static const struct uniphier_board_data ph1_ld4_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x10000000, + .dram_ch0_width = 16, + .dram_ch1_base = 0x90000000, + .dram_ch1_size = 0x10000000, + .dram_ch1_width = 16, + .dram_freq = 1600, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) +static const struct uniphier_board_data ph1_pro4_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x20000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xa0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 32, + .dram_freq = 1600, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) +static const struct uniphier_board_data ph1_sld8_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x10000000, + .dram_ch0_width = 16, + .dram_ch1_base = 0x90000000, + .dram_ch1_size = 0x10000000, + .dram_ch1_width = 16, + .dram_freq = 1333, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) +static const struct uniphier_board_data ph1_pro5_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x20000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xa0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 32, + .dram_freq = 1866, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) +static const struct uniphier_board_data proxstream2_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x40000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xc0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 32, + .dram_ch2_base = 0xe0000000, + .dram_ch2_size = 0x20000000, + .dram_ch2_width = 16, + .dram_freq = 1866, +}; +#endif + +struct uniphier_board_id { + const char *compatible; + const struct uniphier_board_data *param; +}; + +static const struct uniphier_board_id uniphier_boards[] = { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + { "socionext,ph1-sld3", &ph1_sld3_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + { "socionext,ph1-ld4", &ph1_ld4_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + { "socionext,ph1-pro4", &ph1_pro4_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + { "socionext,ph1-sld8", &ph1_sld8_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + { "socionext,ph1-pro5", &ph1_pro5_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + { "socionext,proxstream2", &proxstream2_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + { "socionext,ph1-ld6b", &proxstream2_data, }, +#endif +}; + +const struct uniphier_board_data *uniphier_get_board_param(const void *fdt) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(uniphier_boards); i++) { + if (!fdt_node_check_compatible(fdt, 0, + uniphier_boards[i].compatible)) + return uniphier_boards[i].param; + } + + return NULL; +} diff --git a/arch/arm/mach-uniphier/boot-mode/Makefile b/arch/arm/mach-uniphier/boot-mode/Makefile new file mode 100644 index 0000000000..30c8874905 --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/Makefile @@ -0,0 +1,9 @@ +obj-y += boot-mode.o + +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += boot-mode-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += boot-mode-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += boot-mode-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += boot-mode-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += boot-mode-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += boot-mode-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += boot-mode-proxstream2.o diff --git a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-ld4.c index 54a2510b97..f974d9f08d 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-ld4.c @@ -44,22 +44,31 @@ struct boot_device_info boot_device_table[] = { {BOOT_DEVICE_NONE, "Reserved"}, {BOOT_DEVICE_NONE, "Reserved"}, {BOOT_DEVICE_NONE, "Reserved"}, - { /* sentinel */ } }; -int get_boot_mode_sel(void) +static int get_boot_mode_sel(void) { return (readl(SG_PINMON0) >> 1) & 0x1f; } -u32 spl_boot_device(void) +u32 ph1_ld4_boot_device(void) { int boot_mode; - if (boot_is_swapped()) - return BOOT_DEVICE_NOR; - boot_mode = get_boot_mode_sel(); return boot_device_table[boot_mode].type; } + +void ph1_ld4_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c new file mode 100644 index 0000000000..c68cb59fc0 --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/io.h> +#include <mach/boot-device.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +static struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128MB, Addr 4)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + { /* sentinel */ } +}; + +static int get_boot_mode_sel(void) +{ + return (readl(SG_PINMON0) >> 1) & 0x1f; +} + +u32 ph1_pro5_boot_device(void) +{ + int boot_mode; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} + +void ph1_pro5_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-sld3.c index 40000afe74..c943e12db1 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-sld3.c @@ -11,7 +11,7 @@ #include <mach/sg-regs.h> #include <mach/sbc-regs.h> -struct boot_device_info boot_device_table[] = { +static struct boot_device_info boot_device_table[] = { {BOOT_DEVICE_NONE, "Reserved"}, {BOOT_DEVICE_NONE, "External Master"}, {BOOT_DEVICE_NONE, "Reserved"}, @@ -76,22 +76,31 @@ struct boot_device_info boot_device_table[] = { {BOOT_DEVICE_NONE, "Reserved"}, {BOOT_DEVICE_NONE, "Reserved"}, {BOOT_DEVICE_NONE, "Reserved"}, - { /* sentinel */ } }; -int get_boot_mode_sel(void) +static int get_boot_mode_sel(void) { return readl(SG_PINMON0) & 0x3f; } -u32 spl_boot_device(void) +u32 ph1_sld3_boot_device(void) { int boot_mode; - if (boot_is_swapped()) - return BOOT_DEVICE_NOR; - boot_mode = get_boot_mode_sel(); return boot_device_table[boot_mode].type; } + +void ph1_sld3_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c new file mode 100644 index 0000000000..10a47c6fcc --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/io.h> +#include <mach/boot-device.h> +#include <mach/init.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +static struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_SPI, "SPI 3Byte CS0"}, + {BOOT_DEVICE_SPI, "SPI 4Byte CS0"}, + {BOOT_DEVICE_SPI, "SPI 3Byte CS1"}, + {BOOT_DEVICE_SPI, "SPI 4Byte CS1"}, + {BOOT_DEVICE_SPI, "SPI 4Byte CS0"}, + {BOOT_DEVICE_SPI, "SPI 3Byte CS0"}, + {BOOT_DEVICE_NONE, "Reserved"}, +}; + +int get_boot_mode_sel(void) +{ + return (readl(SG_PINMON0) >> 1) & 0x1f; +} + +u32 proxstream2_boot_device(void) +{ + int boot_mode; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} + +void proxstream2_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode.c new file mode 100644 index 0000000000..c6cafa7919 --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/io.h> +#include <mach/boot-device.h> +#include <mach/sbc-regs.h> +#include <mach/soc_info.h> + +u32 spl_boot_device(void) +{ + if (boot_is_swapped()) + return BOOT_DEVICE_NOR; + + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + return ph1_sld3_boot_device(); +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_LD4: + case SOC_UNIPHIER_PH1_PRO4: + case SOC_UNIPHIER_PH1_SLD8: + return ph1_ld4_boot_device(); +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + return ph1_pro5_boot_device(); +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PROXSTREAM2: + case SOC_UNIPHIER_PH1_LD6B: + return proxstream2_boot_device(); +#endif + default: + return BOOT_DEVICE_NONE; + } +} diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile new file mode 100644 index 0000000000..4f397b986b --- /dev/null +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += clk-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += clk-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += clk-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += clk-proxstream2.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c b/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c index 2de81f0a56..8b95fbb008 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c +++ b/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c @@ -5,9 +5,10 @@ */ #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> -void clkrst_init(void) +void ph1_ld4_clk_init(void) { u32 tmp; diff --git a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c b/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c index 46cace77e5..2e1b20a423 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c +++ b/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c @@ -5,9 +5,10 @@ */ #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> -void clkrst_init(void) +void ph1_pro4_clk_init(void) { u32 tmp; diff --git a/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c b/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c new file mode 100644 index 0000000000..f78edbbe3f --- /dev/null +++ b/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +void ph1_pro5_clk_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_RSTCTRL_NRST_NAND; +#endif + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp = readl(SC_RSTCTRL2); + tmp |= SC_RSTCTRL2_NRST_USB3B1; + writel(tmp, SC_RSTCTRL2); + readl(SC_RSTCTRL2); /* dummy read */ +#endif + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | + SC_CLKCTRL_CEN_GIO; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_CLKCTRL_CEN_NAND; +#endif + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/clk/clk-proxstream2.c b/arch/arm/mach-uniphier/clk/clk-proxstream2.c new file mode 100644 index 0000000000..b494021ecf --- /dev/null +++ b/arch/arm/mach-uniphier/clk/clk-proxstream2.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +void proxstream2_clk_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO; +#endif +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_RSTCTRL_NRST_ETHER; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_RSTCTRL_NRST_NAND; +#endif + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp = readl(SC_RSTCTRL2); + tmp |= SC_RSTCTRL2_NRST_USB3B1; + writel(tmp, SC_RSTCTRL2); + readl(SC_RSTCTRL2); /* dummy read */ +#endif + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | + SC_CLKCTRL_CEN_GIO; +#endif +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_CLKCTRL_CEN_ETHER; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_CLKCTRL_CEN_NAND; +#endif + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/cmd_pinmon.c b/arch/arm/mach-uniphier/cmd_pinmon.c index 8be2ed4fe6..b15ee9dd60 100644 --- a/arch/arm/mach-uniphier/cmd_pinmon.c +++ b/arch/arm/mach-uniphier/cmd_pinmon.c @@ -1,6 +1,5 @@ /* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,20 +7,42 @@ #include <common.h> #include <mach/boot-device.h> #include <mach/sbc-regs.h> +#include <mach/soc_info.h> static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int mode_sel, i; - printf("Boot Swap: %s\n\n", boot_is_swapped() ? "ON" : "OFF"); - mode_sel = get_boot_mode_sel(); - - puts("Boot Mode Pin:\n"); - - for (i = 0; boot_device_table[i].info; i++) - printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, - boot_device_table[i].info); + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + ph1_sld3_boot_mode_show(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_LD4: + case SOC_UNIPHIER_PH1_PRO4: + case SOC_UNIPHIER_PH1_SLD8: + ph1_ld4_boot_mode_show(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_boot_mode_show(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PROXSTREAM2: + case SOC_UNIPHIER_PH1_LD6B: + proxstream2_boot_mode_show(); + break; +#endif + default: + break; + } return 0; } diff --git a/arch/arm/mach-uniphier/ddrphy/Makefile b/arch/arm/mach-uniphier/ddrphy/Makefile new file mode 100644 index 0000000000..e2d109df57 --- /dev/null +++ b/arch/arm/mach-uniphier/ddrphy/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += ddrphy-training.o ddrphy-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += ddrphy-training.o ddrphy-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += ddrphy-training.o ddrphy-ph1-sld8.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c index 2add8fa691..991d9294fd 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c @@ -8,7 +8,7 @@ #include <linux/io.h> #include <mach/ddrphy-regs.h> -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) { u32 tmp; @@ -67,4 +67,6 @@ void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) writel(0x0300C473, &phy->pgcr[1]); writel(0x0000005D, &phy->zq[0].cr[1]); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c index 61ddcf4ec6..bc47ba3280 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c @@ -8,7 +8,7 @@ #include <linux/io.h> #include <mach/ddrphy-regs.h> -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) { u32 tmp; @@ -67,4 +67,6 @@ void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) writel(0x0300C473, &phy->pgcr[1]); writel(0x0000005D, &phy->zq[0].cr[1]); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c index 21efe62da6..39024a09d5 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c @@ -9,7 +9,7 @@ #include <linux/io.h> #include <mach/ddrphy-regs.h> -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) { u32 tmp; @@ -72,4 +72,6 @@ void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) writel(0x0300C473, &phy->pgcr[1]); writel(0x0000005D, &phy->zq[0].cr[1]); + + return 0; } diff --git a/arch/arm/mach-uniphier/ddrphy_training.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-training.c index a98b814df0..a98b814df0 100644 --- a/arch/arm/mach-uniphier/ddrphy_training.c +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-training.c diff --git a/arch/arm/mach-uniphier/debug_ll.S b/arch/arm/mach-uniphier/debug_ll.S new file mode 100644 index 0000000000..d8c9fe43e3 --- /dev/null +++ b/arch/arm/mach-uniphier/debug_ll.S @@ -0,0 +1,185 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/serial_reg.h> +#include <linux/linkage.h> +#include <mach/bcu-regs.h> +#include <mach/sc-regs.h> +#include <mach/sg-regs.h> + +#if !defined(CONFIG_DEBUG_SEMIHOSTING) +#include CONFIG_DEBUG_LL_INCLUDE +#endif + +#define BAUDRATE 115200 +#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d)) + +ENTRY(debug_ll_init) + ldr r0, =SG_REVISION + ldr r1, [r0] + and r1, r1, #SG_REVISION_TYPE_MASK + mov r1, r1, lsr #SG_REVISION_TYPE_SHIFT + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) +#define PH1_SLD3_UART_CLK 36864000 + cmp r1, #0x25 + bne ph1_sld3_end + + sg_set_pinsel 64, 1, 4, 4, r0, r1 @ TXD0 -> TXD0 + + ldr r0, =BCSCR5 + ldr r1, =0x24440000 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_SLD3_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_sld3_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) +#define PH1_LD4_UART_CLK 36864000 + cmp r1, #0x26 + bne ph1_ld4_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 88, 1, 8, 4, r0, r1 @ HSDOUT6 -> TXD0 + + ldr r3, =DIV_ROUND(PH1_LD4_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_ld4_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) +#define PH1_PRO4_UART_CLK 73728000 + cmp r1, #0x28 + bne ph1_pro4_end + + sg_set_pinsel 128, 0, 4, 8, r0, r1 @ TXD0 -> TXD0 + + ldr r0, =SG_LOADPINCTRL + mov r1, #1 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_PRO4_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_pro4_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) +#define PH1_SLD8_UART_CLK 80000000 + cmp r1, #0x29 + bne ph1_sld8_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 70, 3, 8, 4, r0, r1 @ HSDOUT0 -> TXD0 + + ldr r3, =DIV_ROUND(PH1_SLD8_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_sld8_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) +#define PH1_PRO5_UART_CLK 73728000 + cmp r1, #0x2A + bne ph1_pro5_end + + sg_set_pinsel 47, 0, 4, 8, r0, r1 @ TXD0 -> TXD0 + sg_set_pinsel 49, 0, 4, 8, r0, r1 @ TXD1 -> TXD1 + sg_set_pinsel 51, 0, 4, 8, r0, r1 @ TXD2 -> TXD2 + sg_set_pinsel 53, 0, 4, 8, r0, r1 @ TXD3 -> TXD3 + + ldr r0, =SG_LOADPINCTRL + mov r1, #1 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_PRO5_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_pro5_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) +#define PROXSTREAM2_UART_CLK 88900000 + cmp r1, #0x2E + bne proxstream2_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 217, 8, 8, 4, r0, r1 @ TXD0 -> TXD0 + sg_set_pinsel 115, 8, 8, 4, r0, r1 @ TXD1 -> TXD1 + sg_set_pinsel 113, 8, 8, 4, r0, r1 @ TXD2 -> TXD2 + sg_set_pinsel 219, 8, 8, 4, r0, r1 @ TXD3 -> TXD3 + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PROXSTREAM2_UART_CLK, 16 * BAUDRATE) + + b init_uart +proxstream2_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) +#define PH1_LD6B_UART_CLK 88900000 + cmp r1, #0x2F + bne ph1_ld6b_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 135, 3, 8, 4, r0, r1 @ PORT10 -> TXD0 + sg_set_pinsel 115, 0, 8, 4, r0, r1 @ TXD1 -> TXD1 + sg_set_pinsel 113, 2, 8, 4, r0, r1 @ SBO0 -> TXD2 + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_LD6B_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_ld6b_end: +#endif + +init_uart: + addruart r0, r1, r2 + mov r1, #UART_LCR_WLEN8 << 8 + str r1, [r0, #0x10] + str r3, [r0, #0x24] + + mov pc, lr +ENDPROC(debug_ll_init) diff --git a/arch/arm/mach-uniphier/dram_init.c b/arch/arm/mach-uniphier/dram_init.c index 4b8c938b5e..32cc448aeb 100644 --- a/arch/arm/mach-uniphier/dram_init.c +++ b/arch/arm/mach-uniphier/dram_init.c @@ -1,16 +1,59 @@ /* - * Copyright (C) 2012-2015 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <libfdt.h> +#include <linux/err.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const void *get_memory_reg_prop(const void *fdt, int *lenp) +{ + int offset; + + offset = fdt_path_offset(fdt, "/memory"); + if (offset < 0) + return NULL; + + return fdt_getprop(fdt, offset, "reg", lenp); +} int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + const fdt32_t *val; + int len; + + val = get_memory_reg_prop(gd->fdt_blob, &len); + if (len < sizeof(*val)) + return -EINVAL; + + gd->ram_size = fdt32_to_cpu(*(val + 1)); + + debug("DRAM size = %08lx\n", gd->ram_size); return 0; } + +void dram_init_banksize(void) +{ + const fdt32_t *val; + int len, i; + + val = get_memory_reg_prop(gd->fdt_blob, &len); + if (len < 0) + return; + + len /= sizeof(*val); + len /= 2; + + for (i = 0; i < len; i++) { + gd->bd->bi_dram[i].start = fdt32_to_cpu(*val++); + gd->bd->bi_dram[i].size = fdt32_to_cpu(*val++); + + debug("DRAM bank %d: start = %08lx, size = %08lx\n", + i, gd->bd->bi_dram[i].start, gd->bd->bi_dram[i].size); + } +} diff --git a/arch/arm/mach-uniphier/early-clk/Makefile b/arch/arm/mach-uniphier/early-clk/Makefile new file mode 100644 index 0000000000..393ea96f90 --- /dev/null +++ b/arch/arm/mach-uniphier/early-clk/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += early-clk-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += early-clk-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += early-clk-proxstream2.o diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-ld4.c index 60204b53ba..f646c9b7df 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c +++ b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-ld4.c @@ -7,9 +7,10 @@ #include <common.h> #include <spl.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> -void early_clkrst_init(void) +int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd) { u32 tmp; @@ -27,4 +28,6 @@ void early_clkrst_init(void) tmp |= SC_CLKCTRL_CEN_UMC | SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; writel(tmp, SC_CLKCTRL); readl(SC_CLKCTRL); /* dummy read */ + + return 0; } diff --git a/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c new file mode 100644 index 0000000000..007d3b8570 --- /dev/null +++ b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + + /* + * deassert reset + * UMCA2: Ch1 (DDR3) + * UMCA1, UMC31: Ch0 (WIO1) + * UMCA0, UMC30: Ch0 (WIO0) + */ + tmp = readl(SC_RSTCTRL4); + tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 | + SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 | + SC_RSTCTRL4_NRST_UMC31 | SC_RSTCTRL4_NRST_UMC30; + writel(tmp, SC_RSTCTRL4); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + tmp = readl(SC_CLKCTRL4); + tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC1 | + SC_CLKCTRL4_CEN_UMC0; + writel(tmp, SC_CLKCTRL4); + readl(SC_CLKCTRL4); /* dummy read */ + + return 0; +} diff --git a/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c b/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c new file mode 100644 index 0000000000..c303f16a57 --- /dev/null +++ b/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +int proxstream2_early_clk_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + + /* deassert reset */ + if (spl_boot_device() != BOOT_DEVICE_NAND) { + tmp = readl(SC_RSTCTRL); + tmp &= ~SC_RSTCTRL_NRST_NAND; + writel(tmp, SC_RSTCTRL); + }; + + tmp = readl(SC_RSTCTRL4); + tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 | + SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 | + SC_RSTCTRL4_NRST_UMC32 | SC_RSTCTRL4_NRST_UMC31 | + SC_RSTCTRL4_NRST_UMC30; + writel(tmp, SC_RSTCTRL4); + readl(SC_RSTCTRL4); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + + tmp = readl(SC_CLKCTRL4); + tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC2 | + SC_CLKCTRL4_CEN_UMC1 | SC_CLKCTRL4_CEN_UMC0; + writel(tmp, SC_CLKCTRL4); + readl(SC_CLKCTRL4); /* dummy read */ + + return 0; +} diff --git a/arch/arm/mach-uniphier/early-pinctrl/Makefile b/arch/arm/mach-uniphier/early-pinctrl/Makefile new file mode 100644 index 0000000000..e497d28f79 --- /dev/null +++ b/arch/arm/mach-uniphier/early-pinctrl/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += early-pinctrl-ph1-sld3.o diff --git a/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c new file mode 100644 index 0000000000..1bb9375016 --- /dev/null +++ b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <mach/init.h> +#include <mach/sg-regs.h> + +int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(63, 0, 4, 4); /* RXD0 */ + sg_set_pinsel(64, 1, 4, 4); /* TXD0 */ + + sg_set_pinsel(65, 0, 4, 4); /* RXD1 */ + sg_set_pinsel(66, 1, 4, 4); /* TXD1 */ + + sg_set_pinsel(96, 2, 4, 4); /* RXD2 */ + sg_set_pinsel(102, 2, 4, 4); /* TXD2 */ +#endif + + return 0; +} diff --git a/arch/arm/mach-uniphier/include/mach/board.h b/arch/arm/mach-uniphier/include/mach/board.h deleted file mode 100644 index e3cba5befe..0000000000 --- a/arch/arm/mach-uniphier/include/mach/board.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_BOARD_H -#define ARCH_BOARD_H - -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) || \ - defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -void support_card_reset(void); -void support_card_init(void); -void support_card_late_init(void); -int check_support_card(void); -#else -#define support_card_reset() do {} while (0) -#define support_card_init() do {} while (0) -#define support_card_late_init() do {} while (0) -static inline int check_support_card(void) -{ - return 0; -} -#endif - -static inline void uniphier_board_reset(void) -{ - support_card_reset(); -} - -static inline void uniphier_board_init(void) -{ - support_card_init(); -} - -static inline void uniphier_board_late_init(void) -{ - support_card_late_init(); -} - -#endif /* ARCH_BOARD_H */ diff --git a/arch/arm/mach-uniphier/include/mach/boot-device.h b/arch/arm/mach-uniphier/include/mach/boot-device.h index 7a10f1c5b2..2ab5a535fa 100644 --- a/arch/arm/mach-uniphier/include/mach/boot-device.h +++ b/arch/arm/mach-uniphier/include/mach/boot-device.h @@ -1,6 +1,5 @@ /* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,13 +7,19 @@ #ifndef _ASM_BOOT_DEVICE_H_ #define _ASM_BOOT_DEVICE_H_ -int get_boot_mode_sel(void); - struct boot_device_info { u32 type; char *info; }; -extern struct boot_device_info boot_device_table[]; +u32 ph1_sld3_boot_device(void); +u32 ph1_ld4_boot_device(void); +u32 ph1_pro5_boot_device(void); +u32 proxstream2_boot_device(void); + +void ph1_sld3_boot_mode_show(void); +void ph1_ld4_boot_mode_show(void); +void ph1_pro5_boot_mode_show(void); +void proxstream2_boot_mode_show(void); #endif /* _ASM_BOOT_DEVICE_H_ */ diff --git a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h index fce0c01246..adcc972877 100644 --- a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h +++ b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h @@ -156,7 +156,8 @@ struct ddrphy { /* SoC-specific parameters */ #define NR_DATX8_PER_DDRPHY 2 -#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) #define NR_DDRPHY_PER_CH 1 #else #define NR_DDRPHY_PER_CH 2 @@ -167,7 +168,9 @@ struct ddrphy { #define DDRPHY_BASE(ch, phy) (0x5bc01000 + 0x200000 * (ch) + 0x1000 * (phy)) #ifndef __ASSEMBLY__ -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); +int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); +int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); +int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank); int ddrphy_training(struct ddrphy __iomem *phy); #endif diff --git a/arch/arm/mach-uniphier/include/mach/debug-uart.S b/arch/arm/mach-uniphier/include/mach/debug-uart.S deleted file mode 100644 index d2b431f544..0000000000 --- a/arch/arm/mach-uniphier/include/mach/debug-uart.S +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/serial_reg.h> - -#if !defined(CONFIG_DEBUG_SEMIHOSTING) -#include CONFIG_DEBUG_LL_INCLUDE -#endif - -#define BAUDRATE 115200 -#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d)) -#define DIVISOR DIV_ROUND(UART_CLK, 16 * BAUDRATE) - - .macro init_debug_uart, ra, rb, rc - addruart \ra, \rb, \rc - mov \rb, #UART_LCR_WLEN8 << 8 - str \rb, [\ra, #0x10] - ldr \rb, =DIVISOR - str \rb, [\ra, #0x24] - .endm diff --git a/arch/arm/mach-uniphier/include/mach/init.h b/arch/arm/mach-uniphier/include/mach/init.h new file mode 100644 index 0000000000..5108eddfc4 --- /dev/null +++ b/arch/arm/mach-uniphier/include/mach/init.h @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MACH_INIT_H +#define __MACH_INIT_H + +struct uniphier_board_data { + unsigned long dram_ch0_base; + unsigned long dram_ch0_size; + unsigned long dram_ch0_width; + unsigned long dram_ch1_base; + unsigned long dram_ch1_size; + unsigned long dram_ch1_width; + unsigned long dram_ch2_base; + unsigned long dram_ch2_size; + unsigned long dram_ch2_width; + unsigned int dram_freq; +}; + +const struct uniphier_board_data *uniphier_get_board_param(const void *fdt); + +int ph1_sld3_init(const struct uniphier_board_data *bd); +int ph1_ld4_init(const struct uniphier_board_data *bd); +int ph1_pro4_init(const struct uniphier_board_data *bd); +int ph1_sld8_init(const struct uniphier_board_data *bd); +int ph1_pro5_init(const struct uniphier_board_data *bd); +int proxstream2_init(const struct uniphier_board_data *bd); + +#if defined(CONFIG_MICRO_SUPPORT_CARD) +int ph1_sld3_sbc_init(const struct uniphier_board_data *bd); +int ph1_ld4_sbc_init(const struct uniphier_board_data *bd); +int ph1_pro4_sbc_init(const struct uniphier_board_data *bd); +int proxstream2_sbc_init(const struct uniphier_board_data *bd); +#else +static inline int ph1_sld3_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} + +static inline int ph1_ld4_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} + +static inline int ph1_pro4_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} + +static inline int proxstream2_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} +#endif + +int ph1_sld3_bcu_init(const struct uniphier_board_data *bd); +int ph1_ld4_bcu_init(const struct uniphier_board_data *bd); + +int memconf_init(const struct uniphier_board_data *bd); +int ph1_sld3_memconf_init(const struct uniphier_board_data *bd); +int proxstream2_memconf_init(const struct uniphier_board_data *bd); + +int ph1_sld3_pll_init(const struct uniphier_board_data *bd); +int ph1_ld4_pll_init(const struct uniphier_board_data *bd); +int ph1_pro4_pll_init(const struct uniphier_board_data *bd); +int ph1_sld8_pll_init(const struct uniphier_board_data *bd); + +int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd); +int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd); + +int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd); +int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd); +int proxstream2_early_clk_init(const struct uniphier_board_data *bd); + +int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd); + +int ph1_ld4_umc_init(const struct uniphier_board_data *bd); +int ph1_pro4_umc_init(const struct uniphier_board_data *bd); +int ph1_sld8_umc_init(const struct uniphier_board_data *bd); + +void ph1_sld3_pin_init(void); +void ph1_ld4_pin_init(void); +void ph1_pro4_pin_init(void); +void ph1_sld8_pin_init(void); +void ph1_pro5_pin_init(void); +void proxstream2_pin_init(void); +void ph1_ld6b_pin_init(void); + +void ph1_ld4_clk_init(void); +void ph1_pro4_clk_init(void); +void ph1_pro5_clk_init(void); +void proxstream2_clk_init(void); + +#define pr_err(fmt, args...) printf(fmt, ##args) + +#endif /* __MACH_INIT_H */ diff --git a/arch/arm/mach-uniphier/include/mach/led.h b/arch/arm/mach-uniphier/include/mach/led.h deleted file mode 100644 index f7749b4860..0000000000 --- a/arch/arm/mach-uniphier/include/mach/led.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_LED_H -#define ARCH_LED_H - -#include <config.h> - -#define LED_CHAR_0 0x7e -#define LED_CHAR_1 0x0c -#define LED_CHAR_2 0xb6 -#define LED_CHAR_3 0x9e -#define LED_CHAR_4 0xcc -#define LED_CHAR_5 0xda -#define LED_CHAR_6 0xfa -#define LED_CHAR_7 0x4e -#define LED_CHAR_8 0xfe -#define LED_CHAR_9 0xde - -#define LED_CHAR_A 0xee -#define LED_CHAR_B 0xf8 -#define LED_CHAR_C 0x72 -#define LED_CHAR_D 0xbc -#define LED_CHAR_E 0xf2 -#define LED_CHAR_F 0xe2 -#define LED_CHAR_G 0x7a -#define LED_CHAR_H 0xe8 -#define LED_CHAR_I 0x08 -#define LED_CHAR_J 0x3c -#define LED_CHAR_K 0xea -#define LED_CHAR_L 0x70 -#define LED_CHAR_M 0x6e -#define LED_CHAR_N 0xa8 -#define LED_CHAR_O 0xb8 -#define LED_CHAR_P 0xe6 -#define LED_CHAR_Q 0xce -#define LED_CHAR_R 0xa0 -#define LED_CHAR_S 0xc8 -#define LED_CHAR_T 0x8c -#define LED_CHAR_U 0x7c -#define LED_CHAR_V 0x54 -#define LED_CHAR_W 0xfc -#define LED_CHAR_X 0xec -#define LED_CHAR_Y 0xdc -#define LED_CHAR_Z 0xa4 - -#define LED_CHAR_SPACE 0x00 -#define LED_CHAR_DOT 0x01 - -#define LED_CHAR_ (LED_CHAR_SPACE) - -/** Macro to translate 4 characters into integer to display led */ -#define LED_C2I(C0, C1, C2, C3) \ - (~( \ - (LED_CHAR_##C0 << 24) | \ - (LED_CHAR_##C1 << 16) | \ - (LED_CHAR_##C2 << 8) | \ - (LED_CHAR_##C3) \ - )) - -#if defined(CONFIG_SUPPORT_CARD_LED_BASE) - -#define LED_ADDR CONFIG_SUPPORT_CARD_LED_BASE - -#ifdef __ASSEMBLY__ - -#define led_write(C0, C1, C2, C3) raw_led_write LED_C2I(C0, C1, C2, C3) -.macro raw_led_write data - ldr r0, =\data - ldr r1, =LED_ADDR - str r0, [r1] -.endm - -#else /* __ASSEMBLY__ */ - -#include <linux/io.h> - -#define led_write(C0, C1, C2, C3) \ -do { \ - raw_led_write(LED_C2I(C0, C1, C2, C3)); \ -} while (0) - -static inline void raw_led_write(u32 data) -{ - writel(data, LED_ADDR); -} - -#endif /* __ASSEMBLY__ */ - -#else /* CONFIG_SUPPORT_CARD_LED_BASE */ - -#define led_write(C0, C1, C2, C3) -#define raw_led_write(x) - -#endif /* CONFIG_SUPPORT_CARD_LED_BASE */ - -#endif /* ARCH_LED_H */ diff --git a/arch/arm/mach-uniphier/include/mach/micro-support-card.h b/arch/arm/mach-uniphier/include/mach/micro-support-card.h new file mode 100644 index 0000000000..5da0ada726 --- /dev/null +++ b/arch/arm/mach-uniphier/include/mach/micro-support-card.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_BOARD_H +#define ARCH_BOARD_H + +#if defined(CONFIG_MICRO_SUPPORT_CARD) +void support_card_reset(void); +void support_card_init(void); +void support_card_late_init(void); +int check_support_card(void); +void led_puts(const char *s); +#else +static inline void support_card_reset(void) +{ +} + +static inline void support_card_init(void) +{ +} + +static inline void support_card_late_init(void) +{ +} + +static inline int check_support_card(void) +{ + return 0; +} + +static inline void led_puts(const char *s) +{ +} +#endif + +#endif /* ARCH_BOARD_H */ diff --git a/arch/arm/mach-uniphier/include/mach/platdevice.h b/arch/arm/mach-uniphier/include/mach/platdevice.h deleted file mode 100644 index cdf7d132d4..0000000000 --- a/arch/arm/mach-uniphier/include/mach/platdevice.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_PLATDEVICE_H -#define ARCH_PLATDEVICE_H - -#include <dm/platdata.h> -#include <dm/platform_data/serial-uniphier.h> - -#define SERIAL_DEVICE(n, ba, clk) \ -static struct uniphier_serial_platform_data serial_device##n = { \ - .base = ba, \ - .uartclk = clk \ -}; \ -U_BOOT_DEVICE(serial##n) = { \ - .name = DRIVER_NAME, \ - .platdata = &serial_device##n \ -}; - -#endif /* ARCH_PLATDEVICE_H */ diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h index df50294077..474b82d243 100644 --- a/arch/arm/mach-uniphier/include/mach/sc-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h @@ -9,12 +9,16 @@ #ifndef ARCH_SC_REGS_H #define ARCH_SC_REGS_H -#if defined(CONFIG_MACH_PH1_SLD3) +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) #define SC_BASE_ADDR 0xf1840000 #else #define SC_BASE_ADDR 0x61840000 #endif +#define SC_DPLLOSCCTRL (SC_BASE_ADDR | 0x1110) +#define SC_DPLLOSCCTRL_DPLLST (0x1 << 1) +#define SC_DPLLOSCCTRL_DPLLEN (0x1 << 0) + #define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200) #define SC_DPLLCTRL_SSC_EN (0x1 << 31) #define SC_DPLLCTRL_FOUTMODE_MASK (0xf << 16) @@ -43,6 +47,7 @@ #define SC_RSTCTRL_NRST_ETHER (0x1 << 12) #define SC_RSTCTRL_NRST_STDMAC (0x1 << 10) #define SC_RSTCTRL_NRST_GIO (0x1 << 6) +/* Pro4 or older */ #define SC_RSTCTRL_NRST_UMC1 (0x1 << 5) #define SC_RSTCTRL_NRST_UMC0 (0x1 << 4) #define SC_RSTCTRL_NRST_NAND (0x1 << 2) @@ -53,6 +58,16 @@ #define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008) +/* Pro5 or newer */ +#define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c) +#define SC_RSTCTRL4_NRST_UMCSB (0x1 << 12) /* UMC system bus */ +#define SC_RSTCTRL4_NRST_UMCA2 (0x1 << 10) /* UMC ch2 standby */ +#define SC_RSTCTRL4_NRST_UMCA1 (0x1 << 9) /* UMC ch1 standby */ +#define SC_RSTCTRL4_NRST_UMCA0 (0x1 << 8) /* UMC ch0 standby */ +#define SC_RSTCTRL4_NRST_UMC32 (0x1 << 6) /* UMC ch2 */ +#define SC_RSTCTRL4_NRST_UMC31 (0x1 << 5) /* UMC ch1 */ +#define SC_RSTCTRL4_NRST_UMC30 (0x1 << 4) /* UMC ch0 */ + #define SC_CLKCTRL (SC_BASE_ADDR | 0x2104) #define SC_CLKCTRL_CEN_USB31 (0x1 << 17) /* USB3 #1 */ #define SC_CLKCTRL_CEN_USB30 (0x1 << 16) /* USB3 #0 */ @@ -60,11 +75,19 @@ #define SC_CLKCTRL_CEN_MIO (0x1 << 11) #define SC_CLKCTRL_CEN_STDMAC (0x1 << 10) #define SC_CLKCTRL_CEN_GIO (0x1 << 6) +/* Pro4 or older */ #define SC_CLKCTRL_CEN_UMC (0x1 << 4) #define SC_CLKCTRL_CEN_NAND (0x1 << 2) #define SC_CLKCTRL_CEN_SBC (0x1 << 1) #define SC_CLKCTRL_CEN_PERI (0x1 << 0) +/* Pro5 or newer */ +#define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c) +#define SC_CLKCTRL4_CEN_UMCSB (0x1 << 12) /* UMC system bus */ +#define SC_CLKCTRL4_CEN_UMC2 (0x1 << 2) /* UMC ch2 */ +#define SC_CLKCTRL4_CEN_UMC1 (0x1 << 1) /* UMC ch1 */ +#define SC_CLKCTRL4_CEN_UMC0 (0x1 << 0) /* UMC ch0 */ + /* System reset control register */ #define SC_IRQTIMSET (SC_BASE_ADDR | 0x3000) #define SC_SLFRSTSEL (SC_BASE_ADDR | 0x3010) diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h index 43a6c35339..678d437fc9 100644 --- a/arch/arm/mach-uniphier/include/mach/sg-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h @@ -25,53 +25,43 @@ /* Memory Configuration */ #define SG_MEMCONF (SG_CTRL_BASE | 0x0400) +#define SG_MEMCONF_CH0_SZ_MASK ((0x1 << 10) | (0x03 << 0)) #define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0)) #define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0)) #define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0)) #define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0)) #define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0)) +#define SG_MEMCONF_CH0_NUM_MASK (0x1 << 8) #define SG_MEMCONF_CH0_NUM_1 (0x1 << 8) #define SG_MEMCONF_CH0_NUM_2 (0x0 << 8) +#define SG_MEMCONF_CH1_SZ_MASK ((0x1 << 11) | (0x03 << 2)) #define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2)) #define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2)) #define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2)) #define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2)) #define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2)) +#define SG_MEMCONF_CH1_NUM_MASK (0x1 << 9) #define SG_MEMCONF_CH1_NUM_1 (0x1 << 9) #define SG_MEMCONF_CH1_NUM_2 (0x0 << 9) +#define SG_MEMCONF_CH2_SZ_MASK ((0x1 << 26) | (0x03 << 16)) #define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16)) #define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16)) #define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16)) #define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16)) +#define SG_MEMCONF_CH2_NUM_MASK (0x1 << 24) #define SG_MEMCONF_CH2_NUM_1 (0x1 << 24) #define SG_MEMCONF_CH2_NUM_2 (0x0 << 24) +/* PH1-LD6b, ProXstream2 only */ +#define SG_MEMCONF_CH2_DISABLE (0x1 << 21) #define SG_MEMCONF_SPARSEMEM (0x1 << 4) /* Pin Control */ #define SG_PINCTRL_BASE (SG_CTRL_BASE | 0x1000) -#if defined(CONFIG_MACH_PH1_PRO4) -# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 8) -#elif defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \ - defined(CONFIG_MACH_PH1_SLD8) -# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 4) -#endif - -#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_PRO4) -#define SG_PINSELBITS 4 -#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) -#define SG_PINSELBITS 8 -#endif - -#define SG_PINSEL_ADDR(n) (SG_PINCTRL((n) * (SG_PINSELBITS) / 32)) -#define SG_PINSEL_MASK(n) (~(((1 << (SG_PINSELBITS)) - 1) << \ - ((n) * (SG_PINSELBITS) % 32))) -#define SG_PINSEL_MODE(n, mode) ((mode) << ((n) * (SG_PINSELBITS) % 32)) - -/* Only for PH1-Pro4 */ +/* PH1-Pro4, PH1-Pro5 */ #define SG_LOADPINCTRL (SG_CTRL_BASE | 0x1700) /* Input Enable */ @@ -98,11 +88,11 @@ #ifdef __ASSEMBLY__ - .macro set_pinsel, n, value, ra, rd - ldr \ra, =SG_PINSEL_ADDR(\n) + .macro sg_set_pinsel, pin, muxval, mux_bits, reg_stride, ra, rd + ldr \ra, =(SG_PINCTRL_BASE + \pin * \mux_bits / 32 * \reg_stride) ldr \rd, [\ra] - and \rd, \rd, #SG_PINSEL_MASK(\n) - orr \rd, \rd, #SG_PINSEL_MODE(\n, \value) + and \rd, \rd, #~(((1 << \mux_bits) - 1) << (\pin * \mux_bits % 32)) + orr \rd, \rd, #(\muxval << (\pin * \mux_bits % 32)) str \rd, [\ra] .endm @@ -111,10 +101,18 @@ #include <linux/types.h> #include <linux/io.h> -static inline void sg_set_pinsel(int n, int value) +static inline void sg_set_pinsel(unsigned pin, unsigned muxval, + unsigned mux_bits, unsigned reg_stride) { - writel((readl(SG_PINSEL_ADDR(n)) & SG_PINSEL_MASK(n)) - | SG_PINSEL_MODE(n, value), SG_PINSEL_ADDR(n)); + unsigned shift = pin * mux_bits % 32; + unsigned reg = SG_PINCTRL_BASE + pin * mux_bits / 32 * reg_stride; + u32 mask = (1U << mux_bits) - 1; + u32 tmp; + + tmp = readl(reg); + tmp &= ~(mask << shift); + tmp |= (mask & muxval) << shift; + writel(tmp, reg); } #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-uniphier/include/mach/soc_info.h b/arch/arm/mach-uniphier/include/mach/soc_info.h new file mode 100644 index 0000000000..623e7ef20e --- /dev/null +++ b/arch/arm/mach-uniphier/include/mach/soc_info.h @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MACH_SOC_INFO_H__ +#define __MACH_SOC_INFO_H__ + +enum uniphier_soc_id { + SOC_UNIPHIER_PH1_SLD3, + SOC_UNIPHIER_PH1_LD4, + SOC_UNIPHIER_PH1_PRO4, + SOC_UNIPHIER_PH1_SLD8, + SOC_UNIPHIER_PH1_PRO5, + SOC_UNIPHIER_PROXSTREAM2, + SOC_UNIPHIER_PH1_LD6B, + SOC_UNIPHIER_UNKNOWN, +}; + +#define UNIPHIER_NR_ENABLED_SOCS \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_LD4) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + +#define UNIPHIER_MULTI_SOC ((UNIPHIER_NR_ENABLED_SOCS) > 1) + +#if UNIPHIER_MULTI_SOC +enum uniphier_soc_id uniphier_get_soc_type(void); +#else +static inline enum uniphier_soc_id uniphier_get_soc_type(void) +{ +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + return SOC_UNIPHIER_PH1_SLD3; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + return SOC_UNIPHIER_PH1_LD4; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + return SOC_UNIPHIER_PH1_PRO4; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + return SOC_UNIPHIER_PH1_SLD8; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + return SOC_UNIPHIER_PH1_PRO5; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + return SOC_UNIPHIER_PROXSTREAM2; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + return SOC_UNIPHIER_PH1_LD6B; +#endif + + return SOC_UNIPHIER_UNKNOWN; +} +#endif + +#endif /* __MACH_SOC_INFO_H__ */ diff --git a/arch/arm/mach-uniphier/init/Makefile b/arch/arm/mach-uniphier/init/Makefile new file mode 100644 index 0000000000..98833b55de --- /dev/null +++ b/arch/arm/mach-uniphier/init/Makefile @@ -0,0 +1,9 @@ +obj-y += init.o + +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += init-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += init-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += init-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += init-ph1-sld8.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += init-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += init-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += init-proxstream2.o diff --git a/arch/arm/mach-uniphier/init/init-ph1-ld4.c b/arch/arm/mach-uniphier/init/init-ph1-ld4.c new file mode 100644 index 0000000000..8d0ef0389e --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-ld4.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int ph1_ld4_init(const struct uniphier_board_data *bd) +{ + ph1_ld4_bcu_init(bd); + + ph1_ld4_sbc_init(bd); + + support_card_reset(); + + ph1_ld4_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + { + int res; + + res = ph1_ld4_umc_init(bd); + if (res < 0) { + while (1) + ; + } + } + + led_puts("L5"); + + ph1_ld4_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-ph1-pro4.c b/arch/arm/mach-uniphier/init/init-ph1-pro4.c new file mode 100644 index 0000000000..b9ce08d88f --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-pro4.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int ph1_pro4_init(const struct uniphier_board_data *bd) +{ + ph1_pro4_sbc_init(bd); + + support_card_reset(); + + ph1_pro4_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + { + int res; + + res = ph1_pro4_umc_init(bd); + if (res < 0) { + while (1) + ; + } + } + + led_puts("L5"); + + ph1_ld4_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-ph1-pro5.c b/arch/arm/mach-uniphier/init/init-ph1-pro5.c new file mode 100644 index 0000000000..92b3f21d93 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-pro5.c @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int ph1_pro5_init(const struct uniphier_board_data *bd) +{ + ph1_pro4_sbc_init(bd); + + support_card_reset(); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_pro5_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + led_puts("L5"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-ph1-sld3.c b/arch/arm/mach-uniphier/init/init-ph1-sld3.c new file mode 100644 index 0000000000..1146fdab97 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-sld3.c @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int ph1_sld3_init(const struct uniphier_board_data *bd) +{ + ph1_sld3_bcu_init(bd); + + ph1_sld3_sbc_init(bd); + + support_card_reset(); + + ph1_sld3_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + ph1_sld3_memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + ph1_sld3_early_pin_init(bd); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + led_puts("L5"); + + ph1_sld3_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-ph1-sld8.c b/arch/arm/mach-uniphier/init/init-ph1-sld8.c new file mode 100644 index 0000000000..741e88c212 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-sld8.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int ph1_sld8_init(const struct uniphier_board_data *bd) +{ + ph1_ld4_bcu_init(bd); + + ph1_ld4_sbc_init(bd); + + support_card_reset(); + + ph1_sld8_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + { + int res; + + res = ph1_sld8_umc_init(bd); + if (res < 0) { + while (1) + ; + } + } + + led_puts("L5"); + + ph1_ld4_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-proxstream2.c b/arch/arm/mach-uniphier/init/init-proxstream2.c new file mode 100644 index 0000000000..8d03b8f86a --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-proxstream2.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int proxstream2_init(const struct uniphier_board_data *bd) +{ + proxstream2_sbc_init(bd); + + support_card_reset(); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + proxstream2_memconf_init(bd); + + led_puts("L1"); + + proxstream2_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init.c b/arch/arm/mach-uniphier/init/init.c new file mode 100644 index 0000000000..bbfc8e5e08 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <mach/init.h> +#include <mach/soc_info.h> + +DECLARE_GLOBAL_DATA_PTR; + +void spl_board_init(void) +{ + const struct uniphier_board_data *param; + + param = uniphier_get_board_param(gd->fdt_blob); + if (!param) + hang(); + + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + ph1_sld3_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + case SOC_UNIPHIER_PH1_LD4: + ph1_ld4_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + case SOC_UNIPHIER_PH1_PRO4: + ph1_pro4_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_SLD8: + ph1_sld8_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PROXSTREAM2: + case SOC_UNIPHIER_PH1_LD6B: + proxstream2_init(param); + break; +#endif + default: + break; + } +} diff --git a/arch/arm/mach-uniphier/init_page_table.S b/arch/arm/mach-uniphier/init_page_table.S index ac2959a17d..2d3ad15c6e 100644 --- a/arch/arm/mach-uniphier/init_page_table.S +++ b/arch/arm/mach-uniphier/init_page_table.S @@ -1,7 +1,5 @@ /* - * Copyright (C) 2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -23,7 +21,7 @@ ENTRY(init_page_table) section = 0 .rept NR_SECTIONS - .if section == TEXT_SECTION || section == STACK_SECTION + .if section == 0 || section == 1 || section == STACK_SECTION attr = NORMAL .else attr = DEVICE diff --git a/arch/arm/mach-uniphier/lowlevel_init.S b/arch/arm/mach-uniphier/lowlevel_init.S index fd34a4a321..66cad42dde 100644 --- a/arch/arm/mach-uniphier/lowlevel_init.S +++ b/arch/arm/mach-uniphier/lowlevel_init.S @@ -8,7 +8,6 @@ #include <linux/linkage.h> #include <linux/sizes.h> #include <asm/system.h> -#include <mach/led.h> #include <mach/arm-mpcore.h> #include <mach/sbc-regs.h> #include <mach/ssc-regs.h> @@ -28,7 +27,7 @@ ENTRY(lowlevel_init) mcr p15, 0, r0, c1, c0, 0 #ifdef CONFIG_DEBUG_LL - bl setup_lowlevel_debug + bl debug_ll_init #endif /* diff --git a/arch/arm/mach-uniphier/memconf.c b/arch/arm/mach-uniphier/memconf.c deleted file mode 100644 index 59ed0b5dd8..0000000000 --- a/arch/arm/mach-uniphier/memconf.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/sizes.h> -#include <linux/io.h> -#include <mach/sg-regs.h> - -static inline u32 sg_memconf_val_ch0(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH0_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH0_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH0_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH0_SZ_512M; - break; - case SZ_1G: - ret = SG_MEMCONF_CH0_SZ_1G; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH0_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH0_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} - -static inline u32 sg_memconf_val_ch1(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH1_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH1_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH1_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH1_SZ_512M; - break; - case SZ_1G: - ret = SG_MEMCONF_CH1_SZ_1G; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH1_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH1_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} - -void memconf_init(void) -{ - u32 tmp; - - /* Set DDR size */ - tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); - tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); -#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE - tmp |= SG_MEMCONF_SPARSEMEM; -#endif - writel(tmp, SG_MEMCONF); -} diff --git a/arch/arm/mach-uniphier/memconf/Makefile b/arch/arm/mach-uniphier/memconf/Makefile new file mode 100644 index 0000000000..42057a2077 --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/Makefile @@ -0,0 +1,4 @@ +obj-y += memconf.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += memconf-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += memconf-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += memconf-proxstream2.o diff --git a/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c b/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c new file mode 100644 index 0000000000..e13f56d1dc --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +int ph1_sld3_memconf_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + unsigned long size_per_word; + + tmp = readl(SG_MEMCONF); + + tmp &= ~(SG_MEMCONF_CH2_SZ_MASK | SG_MEMCONF_CH2_NUM_MASK); + + switch (bd->dram_ch2_width) { + case 16: + tmp |= SG_MEMCONF_CH2_NUM_1; + size_per_word = bd->dram_ch2_size; + break; + case 32: + tmp |= SG_MEMCONF_CH2_NUM_2; + size_per_word = bd->dram_ch2_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch2 width\n"); + return -EINVAL; + } + + /* Set DDR size */ + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH2_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH2_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH2_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH2_SZ_512M; + break; + default: + pr_err("error: unsupported DRAM Ch2 size\n"); + return -EINVAL; + } + + writel(tmp, SG_MEMCONF); + + return 0; +} diff --git a/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c b/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c new file mode 100644 index 0000000000..d7bf0d4e5f --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +int proxstream2_memconf_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + unsigned long size_per_word; + + tmp = readl(SG_MEMCONF); + + tmp &= ~(SG_MEMCONF_CH2_SZ_MASK | SG_MEMCONF_CH2_NUM_MASK); + + switch (bd->dram_ch2_width) { + case 16: + tmp |= SG_MEMCONF_CH2_NUM_1; + size_per_word = bd->dram_ch2_size; + break; + case 32: + tmp |= SG_MEMCONF_CH2_NUM_2; + size_per_word = bd->dram_ch2_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch2 width\n"); + return -EINVAL; + } + + /* Set DDR size */ + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH2_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH2_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH2_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH2_SZ_512M; + break; + default: + pr_err("error: unsupported DRAM Ch2 size\n"); + return -EINVAL; + } + + if (size_per_word) + tmp &= ~SG_MEMCONF_CH2_DISABLE; + else + tmp |= SG_MEMCONF_CH2_DISABLE; + + writel(tmp, SG_MEMCONF); + + return 0; +} diff --git a/arch/arm/mach-uniphier/memconf/memconf.c b/arch/arm/mach-uniphier/memconf/memconf.c new file mode 100644 index 0000000000..d490736fa4 --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/memconf.c @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +int memconf_init(const struct uniphier_board_data *bd) +{ + u32 tmp = 0; + unsigned long size_per_word; + + tmp = readl(SG_MEMCONF); + + tmp &= ~(SG_MEMCONF_CH0_SZ_MASK | SG_MEMCONF_CH0_NUM_MASK); + + switch (bd->dram_ch0_width) { + case 16: + tmp |= SG_MEMCONF_CH0_NUM_1; + size_per_word = bd->dram_ch0_size; + break; + case 32: + tmp |= SG_MEMCONF_CH0_NUM_2; + size_per_word = bd->dram_ch0_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch0 width\n"); + return -EINVAL; + } + + /* Set DDR size */ + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH0_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH0_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH0_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH0_SZ_512M; + break; + case SZ_1G: + tmp |= SG_MEMCONF_CH0_SZ_1G; + break; + default: + pr_err("error: unsupported DRAM Ch0 size\n"); + return -EINVAL; + } + + tmp &= ~(SG_MEMCONF_CH1_SZ_MASK | SG_MEMCONF_CH1_NUM_MASK); + + switch (bd->dram_ch1_width) { + case 16: + tmp |= SG_MEMCONF_CH1_NUM_1; + size_per_word = bd->dram_ch1_size; + break; + case 32: + tmp |= SG_MEMCONF_CH1_NUM_2; + size_per_word = bd->dram_ch1_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch1 width\n"); + return -EINVAL; + } + + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH1_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH1_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH1_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH1_SZ_512M; + break; + case SZ_1G: + tmp |= SG_MEMCONF_CH1_SZ_1G; + break; + default: + pr_err("error: unsupported DRAM Ch1 size\n"); + return -EINVAL; + } + + if (bd->dram_ch0_base + bd->dram_ch0_size < bd->dram_ch1_base) + tmp |= SG_MEMCONF_SPARSEMEM; + else + tmp &= ~SG_MEMCONF_SPARSEMEM; + + writel(tmp, SG_MEMCONF); + + return 0; +} diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/micro-support-card.c index ea85b20e97..4c34748c25 100644 --- a/arch/arm/mach-uniphier/support_card.c +++ b/arch/arm/mach-uniphier/micro-support-card.c @@ -5,15 +5,17 @@ */ #include <common.h> +#include <linux/ctype.h> #include <linux/io.h> -#include <mach/board.h> +#include <mach/micro-support-card.h> -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) +#define MICRO_SUPPORT_CARD_BASE 0x43f00000 +#define SMC911X_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x00000) +#define LED_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x90000) +#define NS16550A_BASE ((MICRO_SUPPORT_CARD_BASE) + 0xb0000) +#define MICRO_SUPPORT_CARD_RESET ((MICRO_SUPPORT_CARD_BASE) + 0xd0034) +#define MICRO_SUPPORT_CARD_REVISION ((MICRO_SUPPORT_CARD_BASE) + 0xd00E0) -#define PFC_MICRO_SUPPORT_CARD_RESET \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) -#define PFC_MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0) /* * 0: reset deassert, 1: reset * @@ -22,65 +24,22 @@ */ void support_card_reset_deassert(void) { - writel(0, PFC_MICRO_SUPPORT_CARD_RESET); + writel(0, MICRO_SUPPORT_CARD_RESET); } void support_card_reset(void) { - writel(3, PFC_MICRO_SUPPORT_CARD_RESET); + writel(3, MICRO_SUPPORT_CARD_RESET); } static int support_card_show_revision(void) { u32 revision; - revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION); - printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf); + revision = readl(MICRO_SUPPORT_CARD_REVISION); + printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf); return 0; } -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) - -#define DCC_MICRO_SUPPORT_CARD_RESET_LAN \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401300) -#define DCC_MICRO_SUPPORT_CARD_RESET_UART \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401304) -#define DCC_MICRO_SUPPORT_CARD_RESET_I2C \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401308) -#define DCC_MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0) - -void support_card_reset_deassert(void) -{ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -void support_card_reset(void) -{ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -static int support_card_show_revision(void) -{ - u32 revision; - - revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION); - - if (revision >= 0x67) { - printf("(DCC CPLD version 3.%d.%d)\n", - revision >> 4, revision & 0xf); - return 0; - } else { - printf("(DCC CPLD unknown version)\n"); - return -1; - } -} -#endif int check_support_card(void) { @@ -104,7 +63,7 @@ void support_card_init(void) int board_eth_init(bd_t *bis) { - return smc911x_initialize(0, CONFIG_SMC911X_BASE); + return smc911x_initialize(0, SMC911X_BASE); } #endif @@ -146,27 +105,10 @@ static int mem_is_flash(const struct memory_bank *mem) return ret; } -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - /* {address, size} */ -static const struct memory_bank memory_banks_boot_swap_off[] = { - {0x02000000, 0x01f00000}, -}; - -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x01f00000}, -}; -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -static const struct memory_bank memory_banks_boot_swap_off[] = { - {0x04000000, 0x02000000}, -}; - -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x02000000}, - {0x04000000, 0x02000000}, +/* {address, size} */ +static const struct memory_bank memory_banks[] = { + {0x42000000, 0x01f00000}, }; -#endif static const struct memory_bank *flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; @@ -187,13 +129,8 @@ static void detect_num_flash_banks(void) cfi_flash_num_flash_banks = 0; - if (boot_is_swapped()) { - memory_bank = memory_banks_boot_swap_on; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on); - } else { - memory_bank = memory_banks_boot_swap_off; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off); - } + memory_bank = memory_banks; + end = memory_bank + ARRAY_SIZE(memory_banks); for (; memory_bank < end; memory_bank++) { if (cfi_flash_num_flash_banks >= @@ -222,3 +159,73 @@ void support_card_late_init(void) { detect_num_flash_banks(); } + +static const u8 ledval_num[] = { + 0x7e, /* 0 */ + 0x0c, /* 1 */ + 0xb6, /* 2 */ + 0x9e, /* 3 */ + 0xcc, /* 4 */ + 0xda, /* 5 */ + 0xfa, /* 6 */ + 0x4e, /* 7 */ + 0xfe, /* 8 */ + 0xde, /* 9 */ +}; + +static const u8 ledval_alpha[] = { + 0xee, /* A */ + 0xf8, /* B */ + 0x72, /* C */ + 0xbc, /* D */ + 0xf2, /* E */ + 0xe2, /* F */ + 0x7a, /* G */ + 0xe8, /* H */ + 0x08, /* I */ + 0x3c, /* J */ + 0xea, /* K */ + 0x70, /* L */ + 0x6e, /* M */ + 0xa8, /* N */ + 0xb8, /* O */ + 0xe6, /* P */ + 0xce, /* Q */ + 0xa0, /* R */ + 0xc8, /* S */ + 0x8c, /* T */ + 0x7c, /* U */ + 0x54, /* V */ + 0xfc, /* W */ + 0xec, /* X */ + 0xdc, /* Y */ + 0xa4, /* Z */ +}; + +static u8 char2ledval(char c) +{ + if (isdigit(c)) + return ledval_num[c - '0']; + else if (isalpha(c)) + return ledval_alpha[toupper(c) - 'A']; + + return 0; +} + +void led_puts(const char *s) +{ + int i; + u32 val = 0; + + if (!s) + return; + + for (i = 0; i < 4; i++) { + val <<= 8; + val |= char2ledval(*s); + if (*s != '\0') + s++; + } + + writel(~val, LED_BASE); +} diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile deleted file mode 100644 index 1410b12cb6..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += bcu_init.o sg_init.o pll_init.o early_clkrst_init.o \ - early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c b/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c deleted file mode 100644 index d359b56291..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c deleted file mode 100644 index d7ef16b10a..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/early_clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c deleted file mode 100644 index e5e86bb363..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <mach/sg-regs.h> - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */ - sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */ - - sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */ - sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */ - - sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */ - sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S deleted file mode 100644 index 7928c5c87c..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/linkage.h> -#include <mach/sg-regs.h> - -#define UART_CLK 36864000 -#include <mach/debug-uart.S> - -ENTRY(setup_lowlevel_debug) - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 85, 1, r0, r1 - set_pinsel 88, 1, r0, r1 - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c deleted file mode 100644 index 20cc7b30c4..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void pin_init(void) -{ - u32 tmp; - - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(158, 0); /* XNFRE -> XNFRE_GB */ - sg_set_pinsel(159, 0); /* XNFWE -> XNFWE_GB */ - sg_set_pinsel(160, 0); /* XFALE -> NFALE_GB */ - sg_set_pinsel(161, 0); /* XFCLE -> NFCLE_GB */ - sg_set_pinsel(162, 0); /* XNFWP -> XFNWP_GB */ - sg_set_pinsel(163, 0); /* XNFCE0 -> XNFCE0_GB */ - sg_set_pinsel(164, 0); /* NANDRYBY0 -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* MMCCLK -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* MMCCMD -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* MMCDAT0 -> NFD0_GB */ - sg_set_pinsel(25, 0); /* MMCDAT1 -> NFD1_GB */ - sg_set_pinsel(26, 0); /* MMCDAT2 -> NFD2_GB */ - sg_set_pinsel(27, 0); /* MMCDAT3 -> NFD3_GB */ - sg_set_pinsel(28, 0); /* MMCDAT4 -> NFD4_GB */ - sg_set_pinsel(29, 0); /* MMCDAT5 -> NFD5_GB */ - sg_set_pinsel(30, 0); /* MMCDAT6 -> NFD6_GB */ - sg_set_pinsel(31, 0); /* MMCDAT7 -> NFD7_GB */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(53, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(54, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(55, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(56, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(67, 23); */ /* PCOE -> USB2VBUS */ - /* sg_set_pinsel(68, 23); */ /* PCWAIT -> USB2OD */ -#endif - - tmp = readl(SG_IECTRL); - tmp |= 0x41; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c deleted file mode 100644 index 837b2a891b..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/pll_spectrum.c" diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c deleted file mode 100644 index 5b5958be05..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE3); - - /* enable access to sub memory when boot swap is on */ - if (boot_is_swapped()) - sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */ - - sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */ -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/sg_init.c b/arch/arm/mach-uniphier/ph1-ld4/sg_init.c deleted file mode 100644 index dab56e949c..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/sg_init.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void sg_init(void) -{ - u32 tmp; - - /* Input ports must be enabled before deasserting reset of cores */ - tmp = readl(SG_IECTRL); - tmp |= 0x1; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile deleted file mode 100644 index 229f4432ff..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += sg_init.o pll_init.o early_clkrst_init.o \ - early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c deleted file mode 100644 index e78d6ab501..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */ - sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */ - sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */ - sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */ - sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */ - sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */ - sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */ -#endif - - writel(1, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S deleted file mode 100644 index fcaf6d12d8..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/linkage.h> -#include <mach/sc-regs.h> -#include <mach/sg-regs.h> - -#define UART_CLK 73728000 -#include <mach/debug-uart.S> - -ENTRY(setup_lowlevel_debug) - ldr r0, =SC_CLKCTRL - ldr r1, [r0] - orr r1, r1, #SC_CLKCTRL_CEN_PERI - str r1, [r0] - - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 127, 0, r0, r1 - set_pinsel 128, 0, r0, r1 - - ldr r0, =SG_LOADPINCTRL - mov r1, #1 - str r1, [r0] - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c deleted file mode 100644 index 2a5a296f88..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */ - sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */ - sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */ - sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */ - sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */ - sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */ - sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */ - sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */ - sg_set_pinsel(48, 0); /* NFALE -> NFALE */ - sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */ - sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */ - sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */ - sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */ - sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */ - sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ - /* sg_set_pinsel(131, 1); */ /* RXD2 -> NRYBY1 */ - /* sg_set_pinsel(132, 1); */ /* TXD2 -> XNFCE1 */ -#endif - -#ifdef CONFIG_USB_XHCI_UNIPHIER - sg_set_pinsel(180, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(181, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(182, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(183, 0); /* USB1OD -> USB1OD */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */ - sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */ - sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */ - sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */ -#endif - - writel(1, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c deleted file mode 100644 index 877ba79f68..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0400bc01, SBBASE1); /* sub memory */ - writel(0x0800bf01, SBBASE3); /* peripherals */ - - /* enable access to sub memory when boot swap is on */ - if (boot_is_swapped()) - sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ - - sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ - writel(0x00000001, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/sg_init.c b/arch/arm/mach-uniphier/ph1-pro4/sg_init.c deleted file mode 100644 index d6ccffbbc3..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/sg_init.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void sg_init(void) -{ - u32 tmp; - - /* Input ports must be enabled before deasserting reset of cores */ - tmp = readl(SG_IECTRL); - tmp |= 1 << 6; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/Makefile b/arch/arm/mach-uniphier/ph1-sld3/Makefile deleted file mode 100644 index aff5d640d6..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += bcu_init.o memconf.o sg_init.o pll_init.o early_clkrst_init.o \ - early_pinctrl.o pll_spectrum.o umc_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c deleted file mode 100644 index 3a3dab7a15..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c deleted file mode 100644 index d7ef16b10a..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/early_clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c deleted file mode 100644 index f113e658d8..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <mach/sg-regs.h> - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(63, 0); /* RXD0 */ - sg_set_pinsel(64, 1); /* TXD0 */ - - sg_set_pinsel(65, 0); /* RXD1 */ - sg_set_pinsel(66, 1); /* TXD1 */ - - sg_set_pinsel(96, 2); /* RXD2 */ - sg_set_pinsel(102, 2); /* TXD2 */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S deleted file mode 100644 index 41f67b7a8f..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/linkage.h> -#include <mach/bcu-regs.h> -#include <mach/sc-regs.h> -#include <mach/sg-regs.h> - -#define UART_CLK 36864000 -#include <mach/debug-uart.S> - -ENTRY(setup_lowlevel_debug) - ldr r0, =BCSCR5 - ldr r1, =0x24440000 - str r1, [r0] - - ldr r0, =SC_CLKCTRL - ldr r1, [r0] - orr r1, r1, #SC_CLKCTRL_CEN_PERI - str r1, [r0] - - init_debug_uart r0, r1, r2 - - set_pinsel 63, 0, r0, r1 - set_pinsel 64, 1, r0, r1 - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld3/memconf.c b/arch/arm/mach-uniphier/ph1-sld3/memconf.c deleted file mode 100644 index 553a9e3384..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/memconf.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/types.h> -#include <linux/sizes.h> -#include <mach/sg-regs.h> - -static inline u32 sg_memconf_val_ch2(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH2_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH2_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH2_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH2_SZ_512M; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH2_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH2_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} - -u32 memconf_additional_val(void) -{ - return sg_memconf_val_ch2(CONFIG_SDRAM2_SIZE, CONFIG_DDR_NUM_CH2); -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c deleted file mode 100644 index 5ecbe4cca3..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <mach/sg-regs.h> - -void pin_init(void) -{ -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(13, 0); /* USB0OC */ - sg_set_pinsel(14, 1); /* USB0VBUS */ - - sg_set_pinsel(15, 0); /* USB1OC */ - sg_set_pinsel(16, 1); /* USB1VBUS */ - - sg_set_pinsel(17, 0); /* USB2OC */ - sg_set_pinsel(18, 1); /* USB2VBUS */ - - sg_set_pinsel(19, 0); /* USB3OC */ - sg_set_pinsel(20, 1); /* USB3VBUS */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c deleted file mode 100644 index f5e24467ce..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - /* only address/data multiplex mode is supported */ - - /* XECS0 : boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL02); - - /* XECS1 : sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); - - /* XECS2 : peripherals */ - writel(SBCTRL0_ADMULTIPLX_PERI_VALUE, SBCTRL20); - writel(SBCTRL1_ADMULTIPLX_PERI_VALUE, SBCTRL21); - writel(SBCTRL2_ADMULTIPLX_PERI_VALUE, SBCTRL22); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE2); - - sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sg_init.c b/arch/arm/mach-uniphier/ph1-sld3/sg_init.c deleted file mode 100644 index ca3cb9c6b8..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/sg_init.c +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -void sg_init(void) -{ -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/umc_init.c b/arch/arm/mach-uniphier/ph1-sld3/umc_init.c deleted file mode 100644 index 91ee3de282..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/umc_init.c +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -int umc_init(void) -{ - /* add UMC init code here */ - printf("Implement memory init code\n"); - - return 0; -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/Makefile b/arch/arm/mach-uniphier/ph1-sld8/Makefile deleted file mode 100644 index 8eb575e1d3..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/Makefile +++ /dev/null @@ -1 +0,0 @@ -include $(src)/../ph1-ld4/Makefile diff --git a/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c b/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c deleted file mode 100644 index 69b172e4e7..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/bcu_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c b/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c deleted file mode 100644 index d359b56291..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c deleted file mode 100644 index 8d3435d632..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c deleted file mode 100644 index dd236b7e50..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/early_clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c deleted file mode 100644 index 28cc4296fc..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <mach/sg-regs.h> - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(70, 3); /* HDDOUT0 -> TXD0 */ - sg_set_pinsel(71, 3); /* HSDOUT1 -> RXD0 */ - - sg_set_pinsel(114, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(115, 0); /* RXD1 -> RXD1 */ - - sg_set_pinsel(112, 1); /* SBO1 -> TXD2 */ - sg_set_pinsel(113, 1); /* SBI1 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S deleted file mode 100644 index 73f0f63eba..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/linkage.h> -#include <mach/sg-regs.h> - -#define UART_CLK 80000000 -#include <mach/debug-uart.S> - -ENTRY(setup_lowlevel_debug) - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 70, 3, r0, r1 - set_pinsel 71, 3, r0, r1 - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c deleted file mode 100644 index 130c831736..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_SYS_I2C_UNIPHIER - { - u32 tmp; - tmp = readl(SG_IECTRL); - tmp |= 0xc00; /* enable SCL0, SDA0, SCL1, SDA1 */ - writel(tmp, SG_IECTRL); - } -#endif - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(15, 0); /* XNFRE_GB -> XNFRE_GB */ - sg_set_pinsel(16, 0); /* XNFWE_GB -> XNFWE_GB */ - sg_set_pinsel(17, 0); /* XFALE_GB -> NFALE_GB */ - sg_set_pinsel(18, 0); /* XFCLE_GB -> NFCLE_GB */ - sg_set_pinsel(19, 0); /* XNFWP_GB -> XFNWP_GB */ - sg_set_pinsel(20, 0); /* XNFCE0_GB -> XNFCE0_GB */ - sg_set_pinsel(21, 0); /* NANDRYBY0_GB -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* XFNCE1_GB -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* NANDRYBY1_GB -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* NFD0_GB -> NFD0_GB */ - sg_set_pinsel(25, 0); /* NFD1_GB -> NFD1_GB */ - sg_set_pinsel(26, 0); /* NFD2_GB -> NFD2_GB */ - sg_set_pinsel(27, 0); /* NFD3_GB -> NFD3_GB */ - sg_set_pinsel(28, 0); /* NFD4_GB -> NFD4_GB */ - sg_set_pinsel(29, 0); /* NFD5_GB -> NFD5_GB */ - sg_set_pinsel(30, 0); /* NFD6_GB -> NFD6_GB */ - sg_set_pinsel(31, 0); /* NFD7_GB -> NFD7_GB */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(41, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(42, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(43, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(44, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(114, 1); */ /* TXD1 -> USB2VBUS (shared with UART) */ - /* sg_set_pinsel(115, 1); */ /* RXD1 -> USB2OD */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c deleted file mode 100644 index 9b8c4855e5..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/pll_spectrum.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c deleted file mode 100644 index 225c0d24de..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/sbc_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c deleted file mode 100644 index c2267c73ee..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* - * SBCTRL0* does not need settings because PH1-sLD8 has no support for - * XECS0. The boot swap must be enabled to boot from the support card. - */ - - if (boot_is_swapped()) { - /* XECS1 : boot memory if boot swap is on */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - } - - /* XECS4 : sub memory */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL41); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL42); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL44); - - /* XECS5 : peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL50); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL51); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL52); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL54); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0900bfff, SBBASE1); /* dummy */ - writel(0x0400bc01, SBBASE4); /* sub memory */ - writel(0x0800bf01, SBBASE5); /* peripherals */ - - sg_set_pinsel(134, 16); /* XIRQ6 -> XECS4 */ - sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */ - - /* dummy read to assure write process */ - readl(SG_PINCTRL(0)); -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/sg_init.c b/arch/arm/mach-uniphier/ph1-sld8/sg_init.c deleted file mode 100644 index a808289a56..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/sg_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/sg_init.c" diff --git a/arch/arm/mach-uniphier/pinctrl/Makefile b/arch/arm/mach-uniphier/pinctrl/Makefile new file mode 100644 index 0000000000..85175955d3 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pinctrl-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += pinctrl-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += pinctrl-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += pinctrl-ph1-ld6b.o diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c new file mode 100644 index 0000000000..160d3ef299 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_ld4_pin_init(void) +{ + u32 tmp; + + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(158, 0, 8, 4); /* XNFRE -> XNFRE_GB */ + sg_set_pinsel(159, 0, 8, 4); /* XNFWE -> XNFWE_GB */ + sg_set_pinsel(160, 0, 8, 4); /* XFALE -> NFALE_GB */ + sg_set_pinsel(161, 0, 8, 4); /* XFCLE -> NFCLE_GB */ + sg_set_pinsel(162, 0, 8, 4); /* XNFWP -> XFNWP_GB */ + sg_set_pinsel(163, 0, 8, 4); /* XNFCE0 -> XNFCE0_GB */ + sg_set_pinsel(164, 0, 8, 4); /* NANDRYBY0 -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0, 8, 4); /* MMCCLK -> XFNCE1_GB */ + sg_set_pinsel(23, 0, 8, 4); /* MMCCMD -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0, 8, 4); /* MMCDAT0 -> NFD0_GB */ + sg_set_pinsel(25, 0, 8, 4); /* MMCDAT1 -> NFD1_GB */ + sg_set_pinsel(26, 0, 8, 4); /* MMCDAT2 -> NFD2_GB */ + sg_set_pinsel(27, 0, 8, 4); /* MMCDAT3 -> NFD3_GB */ + sg_set_pinsel(28, 0, 8, 4); /* MMCDAT4 -> NFD4_GB */ + sg_set_pinsel(29, 0, 8, 4); /* MMCDAT5 -> NFD5_GB */ + sg_set_pinsel(30, 0, 8, 4); /* MMCDAT6 -> NFD6_GB */ + sg_set_pinsel(31, 0, 8, 4); /* MMCDAT7 -> NFD7_GB */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(53, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(54, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(55, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(56, 0, 8, 4); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(67, 23, 8, 4); */ /* PCOE -> USB2VBUS */ + /* sg_set_pinsel(68, 23, 8, 4); */ /* PCWAIT -> USB2OD */ +#endif + + tmp = readl(SG_IECTRL); + tmp |= 0x41; + writel(tmp, SG_IECTRL); +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c new file mode 100644 index 0000000000..4f950d3fc6 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_ld6b_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(30, 0, 8, 4); /* XNFRE -> XNFRE */ + sg_set_pinsel(31, 0, 8, 4); /* XNFWE -> XNFWE */ + sg_set_pinsel(32, 0, 8, 4); /* NFALE -> NFALE */ + sg_set_pinsel(33, 0, 8, 4); /* NFCLE -> NFCLE */ + sg_set_pinsel(34, 0, 8, 4); /* XNFWP -> XNFWP */ + sg_set_pinsel(35, 0, 8, 4); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(36, 0, 8, 4); /* NRYBY0 -> NRYBY0 */ + sg_set_pinsel(37, 0, 8, 4); /* XNFCE1 -> NRYBY1 */ + sg_set_pinsel(38, 0, 8, 4); /* NRYBY1 -> XNFCE1 */ + sg_set_pinsel(39, 0, 8, 4); /* NFD0 -> NFD0 */ + sg_set_pinsel(40, 0, 8, 4); /* NFD1 -> NFD1 */ + sg_set_pinsel(41, 0, 8, 4); /* NFD2 -> NFD2 */ + sg_set_pinsel(42, 0, 8, 4); /* NFD3 -> NFD3 */ + sg_set_pinsel(43, 0, 8, 4); /* NFD4 -> NFD4 */ + sg_set_pinsel(44, 0, 8, 4); /* NFD5 -> NFD5 */ + sg_set_pinsel(45, 0, 8, 4); /* NFD6 -> NFD6 */ + sg_set_pinsel(46, 0, 8, 4); /* NFD7 -> NFD7 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(56, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(57, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(58, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(59, 0, 8, 4); /* USB1OD -> USB1OD */ + sg_set_pinsel(60, 0, 8, 4); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(61, 0, 8, 4); /* USB2OD -> USB2OD */ + sg_set_pinsel(62, 0, 8, 4); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(63, 0, 8, 4); /* USB3OD -> USB3OD */ +#endif +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c new file mode 100644 index 0000000000..f50644c52b --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_pro4_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(40, 0, 4, 8); /* NFD0 -> NFD0 */ + sg_set_pinsel(41, 0, 4, 8); /* NFD1 -> NFD1 */ + sg_set_pinsel(42, 0, 4, 8); /* NFD2 -> NFD2 */ + sg_set_pinsel(43, 0, 4, 8); /* NFD3 -> NFD3 */ + sg_set_pinsel(44, 0, 4, 8); /* NFD4 -> NFD4 */ + sg_set_pinsel(45, 0, 4, 8); /* NFD5 -> NFD5 */ + sg_set_pinsel(46, 0, 4, 8); /* NFD6 -> NFD6 */ + sg_set_pinsel(47, 0, 4, 8); /* NFD7 -> NFD7 */ + sg_set_pinsel(48, 0, 4, 8); /* NFALE -> NFALE */ + sg_set_pinsel(49, 0, 4, 8); /* NFCLE -> NFCLE */ + sg_set_pinsel(50, 0, 4, 8); /* XNFRE -> XNFRE */ + sg_set_pinsel(51, 0, 4, 8); /* XNFWE -> XNFWE */ + sg_set_pinsel(52, 0, 4, 8); /* XNFWP -> XNFWP */ + sg_set_pinsel(53, 0, 4, 8); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(54, 0, 4, 8); /* NRYBY0 -> NRYBY0 */ + /* sg_set_pinsel(131, 1, 4, 8); */ /* RXD2 -> NRYBY1 */ + /* sg_set_pinsel(132, 1, 4, 8); */ /* TXD2 -> XNFCE1 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(180, 0, 4, 8); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(181, 0, 4, 8); /* USB0OD -> USB0OD */ + sg_set_pinsel(182, 0, 4, 8); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(183, 0, 4, 8); /* USB1OD -> USB1OD */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(184, 0, 4, 8); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(185, 0, 4, 8); /* USB2OD -> USB2OD */ + sg_set_pinsel(187, 0, 4, 8); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(188, 0, 4, 8); /* USB3OD -> USB3OD */ +#endif + + writel(1, SG_LOADPINCTRL); +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c new file mode 100644 index 0000000000..a6cc0824e2 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_pro5_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(19, 0, 4, 8); /* XNFRE -> XNFRE */ + sg_set_pinsel(20, 0, 4, 8); /* XNFWE -> XNFWE */ + sg_set_pinsel(21, 0, 4, 8); /* NFALE -> NFALE */ + sg_set_pinsel(22, 0, 4, 8); /* NFCLE -> NFCLE */ + sg_set_pinsel(23, 0, 4, 8); /* XNFWP -> XNFWP */ + sg_set_pinsel(24, 0, 4, 8); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(25, 0, 4, 8); /* NRYBY0 -> NRYBY0 */ + sg_set_pinsel(26, 0, 4, 8); /* XNFCE1 -> XNFCE1 */ + sg_set_pinsel(27, 0, 4, 8); /* NRYBY1 -> NRYBY1 */ + sg_set_pinsel(28, 0, 4, 8); /* NFD0 -> NFD0 */ + sg_set_pinsel(29, 0, 4, 8); /* NFD1 -> NFD1 */ + sg_set_pinsel(30, 0, 4, 8); /* NFD2 -> NFD2 */ + sg_set_pinsel(31, 0, 4, 8); /* NFD3 -> NFD3 */ + sg_set_pinsel(32, 0, 4, 8); /* NFD4 -> NFD4 */ + sg_set_pinsel(33, 0, 4, 8); /* NFD5 -> NFD5 */ + sg_set_pinsel(34, 0, 4, 8); /* NFD6 -> NFD6 */ + sg_set_pinsel(35, 0, 4, 8); /* NFD7 -> NFD7 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(124, 0, 4, 8); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(125, 0, 4, 8); /* USB0OD -> USB0OD */ + sg_set_pinsel(126, 0, 4, 8); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(127, 0, 4, 8); /* USB1OD -> USB1OD */ +#endif + + writel(1, SG_LOADPINCTRL); +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c new file mode 100644 index 0000000000..f1b2bbbb4a --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_sld3_pin_init(void) +{ +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(13, 0, 4, 4); /* USB0OC */ + sg_set_pinsel(14, 1, 4, 4); /* USB0VBUS */ + + sg_set_pinsel(15, 0, 4, 4); /* USB1OC */ + sg_set_pinsel(16, 1, 4, 4); /* USB1VBUS */ + + sg_set_pinsel(17, 0, 4, 4); /* USB2OC */ + sg_set_pinsel(18, 1, 4, 4); /* USB2VBUS */ + + sg_set_pinsel(19, 0, 4, 4); /* USB3OC */ + sg_set_pinsel(20, 1, 4, 4); /* USB3VBUS */ +#endif +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c new file mode 100644 index 0000000000..f936a53d1f --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_sld8_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(15, 0, 8, 4); /* XNFRE_GB -> XNFRE_GB */ + sg_set_pinsel(16, 0, 8, 4); /* XNFWE_GB -> XNFWE_GB */ + sg_set_pinsel(17, 0, 8, 4); /* XFALE_GB -> NFALE_GB */ + sg_set_pinsel(18, 0, 8, 4); /* XFCLE_GB -> NFCLE_GB */ + sg_set_pinsel(19, 0, 8, 4); /* XNFWP_GB -> XFNWP_GB */ + sg_set_pinsel(20, 0, 8, 4); /* XNFCE0_GB -> XNFCE0_GB */ + sg_set_pinsel(21, 0, 8, 4); /* NANDRYBY0_GB -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0, 8, 4); /* XFNCE1_GB -> XFNCE1_GB */ + sg_set_pinsel(23, 0, 8, 4); /* NANDRYBY1_GB -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0, 8, 4); /* NFD0_GB -> NFD0_GB */ + sg_set_pinsel(25, 0, 8, 4); /* NFD1_GB -> NFD1_GB */ + sg_set_pinsel(26, 0, 8, 4); /* NFD2_GB -> NFD2_GB */ + sg_set_pinsel(27, 0, 8, 4); /* NFD3_GB -> NFD3_GB */ + sg_set_pinsel(28, 0, 8, 4); /* NFD4_GB -> NFD4_GB */ + sg_set_pinsel(29, 0, 8, 4); /* NFD5_GB -> NFD5_GB */ + sg_set_pinsel(30, 0, 8, 4); /* NFD6_GB -> NFD6_GB */ + sg_set_pinsel(31, 0, 8, 4); /* NFD7_GB -> NFD7_GB */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(41, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(42, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(43, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(44, 0, 8, 4); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(114, 1, 8, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */ + /* sg_set_pinsel(115, 1, 8, 4); */ /* RXD1 -> USB2OD */ +#endif +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c new file mode 100644 index 0000000000..96abd0235c --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void proxstream2_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(30, 8, 8, 4); /* XNFRE -> XNFRE */ + sg_set_pinsel(31, 8, 8, 4); /* XNFWE -> XNFWE */ + sg_set_pinsel(32, 8, 8, 4); /* NFALE -> NFALE */ + sg_set_pinsel(33, 8, 8, 4); /* NFCLE -> NFCLE */ + sg_set_pinsel(34, 8, 8, 4); /* XNFWP -> XNFWP */ + sg_set_pinsel(35, 8, 8, 4); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(36, 8, 8, 4); /* NRYBY0 -> NRYBY0 */ + sg_set_pinsel(37, 8, 8, 4); /* XNFCE1 -> NRYBY1 */ + sg_set_pinsel(38, 8, 8, 4); /* NRYBY1 -> XNFCE1 */ + sg_set_pinsel(39, 8, 8, 4); /* NFD0 -> NFD0 */ + sg_set_pinsel(40, 8, 8, 4); /* NFD1 -> NFD1 */ + sg_set_pinsel(41, 8, 8, 4); /* NFD2 -> NFD2 */ + sg_set_pinsel(42, 8, 8, 4); /* NFD3 -> NFD3 */ + sg_set_pinsel(43, 8, 8, 4); /* NFD4 -> NFD4 */ + sg_set_pinsel(44, 8, 8, 4); /* NFD5 -> NFD5 */ + sg_set_pinsel(45, 8, 8, 4); /* NFD6 -> NFD6 */ + sg_set_pinsel(46, 8, 8, 4); /* NFD7 -> NFD7 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(56, 8, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(57, 8, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(58, 8, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(59, 8, 8, 4); /* USB1OD -> USB1OD */ + sg_set_pinsel(60, 8, 8, 4); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(61, 8, 8, 4); /* USB2OD -> USB2OD */ + sg_set_pinsel(62, 8, 8, 4); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(63, 8, 8, 4); /* USB3OD -> USB3OD */ +#endif +} diff --git a/arch/arm/mach-uniphier/pll/Makefile b/arch/arm/mach-uniphier/pll/Makefile new file mode 100644 index 0000000000..d33f99e446 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pll-init-ph1-sld3.o \ + pll-spectrum-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pll-init-ph1-ld4.o \ + pll-spectrum-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pll-init-ph1-pro4.o \ + pll-spectrum-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pll-init-ph1-sld8.o \ + pll-spectrum-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c index f8ec2b61fb..a272a900e1 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/pll_init.c +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c @@ -5,13 +5,15 @@ */ #include <common.h> +#include <linux/err.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> #include <mach/sg-regs.h> #undef DPLL_SSC_RATE_1PER -static void dpll_init(void) +static int dpll_init(unsigned int dram_freq) { u32 tmp; @@ -22,13 +24,17 @@ static void dpll_init(void) */ tmp = readl(SC_DPLLCTRL); tmp &= ~0x000f0000; -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unknown frequency" -#endif + switch (dram_freq) { + case 1333: + tmp |= 0x000d0000; + break; + case 1600: + tmp |= 0x000c0000; + break; + default: + pr_err("Unsupported frequency"); + return -EINVAL; + } #if defined(DPLL_SSC_RATE_1PER) tmp &= ~SC_DPLLCTRL_SSC_RATE; @@ -40,6 +46,8 @@ static void dpll_init(void) tmp = readl(SC_DPLLCTRL2); tmp |= SC_DPLLCTRL2_NRSTDS; writel(tmp, SC_DPLLCTRL2); + + return 0; } static void upll_init(void) @@ -174,9 +182,13 @@ static void vpll_init(void) writel(tmp, SC_VPLL27BCTRL); } -void pll_init(void) +int ph1_ld4_pll_init(const struct uniphier_board_data *bd) { - dpll_init(); + int ret; + + ret = dpll_init(bd->dram_freq); + if (ret) + return ret; upll_init(); vpll_init(); @@ -186,4 +198,6 @@ void pll_init(void) * so 20 usec can be saved here. */ udelay(480); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c index d693368816..906c22f6c5 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c @@ -5,13 +5,15 @@ */ #include <common.h> +#include <linux/err.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> #include <mach/sg-regs.h> #undef DPLL_SSC_RATE_1PER -static void dpll_init(void) +static int dpll_init(unsigned int dram_freq) { u32 tmp; @@ -22,13 +24,17 @@ static void dpll_init(void) */ tmp = readl(SC_DPLLCTRL); tmp &= ~(0x000f0000); -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unsupported frequency" -#endif + switch (dram_freq) { + case 1333: + tmp |= 0x000d0000; + break; + case 1600: + tmp |= 0x000c0000; + break; + default: + pr_err("Unsupported frequency"); + return -EINVAL; + } /* * Set Moduration rate @@ -44,6 +50,8 @@ static void dpll_init(void) tmp = readl(SC_DPLLCTRL2); tmp |= SC_DPLLCTRL2_NRSTDS; writel(tmp, SC_DPLLCTRL2); + + return 0; } static void vpll_init(void) @@ -54,12 +62,10 @@ static void vpll_init(void) tmp = readl(SG_PINMON0); clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; -#if defined(CONFIG_MACH_PH1_PRO4) /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) return; -#endif /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ tmp = readl(SC_VPLL27ACTRL); @@ -138,9 +144,13 @@ static void vpll_init(void) writel(tmp, SC_VPLL27BCTRL); } -void pll_init(void) +int ph1_pro4_pll_init(const struct uniphier_board_data *bd) { - dpll_init(); + int ret; + + ret = dpll_init(bd->dram_freq); + if (ret) + return ret; vpll_init(); /* @@ -148,4 +158,6 @@ void pll_init(void) * We wait 1 usec in vpll_init() so 1 usec can be saved here. */ udelay(499); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c index ebd1c310b7..6294a452c2 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/pll_init.c +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c @@ -4,7 +4,10 @@ * SPDX-License-Identifier: GPL-2.0+ */ -void pll_init(void) +#include <mach/init.h> + +int ph1_sld3_pll_init(const struct uniphier_board_data *bd) { /* add pll init code here */ + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld8/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c index 109cb5fee0..f249abeeda 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/pll_init.c +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c @@ -6,6 +6,7 @@ #include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> #include <mach/sg-regs.h> @@ -186,7 +187,7 @@ static void vpll_init(void) writel(tmp, SC_VPLL27BCTRL); } -void pll_init(void) +int ph1_sld8_pll_init(const struct uniphier_board_data *bd) { dpll_init(); upll_init(); @@ -198,4 +199,6 @@ void pll_init(void) * so 20 usec can be saved here. */ udelay(480); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c index fcf2ad282a..cad0ed8cdd 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c +++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c @@ -4,15 +4,17 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> -void enable_dpll_ssc(void) +int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd) { u32 tmp; tmp = readl(SC_DPLLCTRL); tmp |= SC_DPLLCTRL_SSC_EN; writel(tmp, SC_DPLLCTRL); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c index fcf2ad282a..43dc973654 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c +++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c @@ -6,13 +6,16 @@ #include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> -void enable_dpll_ssc(void) +int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd) { u32 tmp; tmp = readl(SC_DPLLCTRL); tmp |= SC_DPLLCTRL_SSC_EN; writel(tmp, SC_DPLLCTRL); + + return 0; } diff --git a/arch/arm/mach-uniphier/print_misc_info.c b/arch/arm/mach-uniphier/print_misc_info.c index 22ea512285..5140b0c438 100644 --- a/arch/arm/mach-uniphier/print_misc_info.c +++ b/arch/arm/mach-uniphier/print_misc_info.c @@ -5,7 +5,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <mach/board.h> +#include <mach/micro-support-card.h> int misc_init_f(void) { diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile new file mode 100644 index 0000000000..db622d2034 --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += sbc-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += sbc-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += sbc-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += sbc-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += sbc-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += sbc-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += sbc-proxstream2.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c index 8e25792b50..929f50a883 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c @@ -6,10 +6,11 @@ #include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sbc-regs.h> #include <mach/sg-regs.h> -void sbc_init(void) +int ph1_ld4_sbc_init(const struct uniphier_board_data *bd) { u32 tmp; @@ -30,20 +31,22 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); } + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c index 533739c364..1032c54e64 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c @@ -6,10 +6,11 @@ #include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sbc-regs.h> #include <mach/sg-regs.h> -void sbc_init(void) +int ph1_pro4_sbc_init(const struct uniphier_board_data *bd) { /* * Only CS1 is connected to support card. @@ -23,20 +24,22 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); } + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c index d66f89ea51..fb707be83a 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c @@ -6,10 +6,11 @@ #include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sbc-regs.h> #include <mach/sg-regs.h> -void sbc_init(void) +int ph1_sld3_sbc_init(const struct uniphier_board_data *bd) { /* only address/data multiplex mode is supported */ @@ -24,22 +25,24 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); } - sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ + sg_set_pinsel(99, 1, 4, 4); /* GPIO26 -> EA24 */ + + return 0; } diff --git a/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c b/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c new file mode 100644 index 0000000000..9c3aeb7cd0 --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +int proxstream2_sbc_init(const struct uniphier_board_data *bd) +{ + /* necessary for ROM boot ?? */ + /* system bus output enable */ + writel(0x17, PC0CTRL); + + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. + * + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } + + return 0; +} diff --git a/arch/arm/mach-uniphier/soc_info.c b/arch/arm/mach-uniphier/soc_info.c new file mode 100644 index 0000000000..3e8e7f4ef3 --- /dev/null +++ b/arch/arm/mach-uniphier/soc_info.c @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <linux/types.h> +#include <mach/sg-regs.h> +#include <mach/soc_info.h> + +#if UNIPHIER_MULTI_SOC +enum uniphier_soc_id uniphier_get_soc_type(void) +{ + u32 revision = readl(SG_REVISION); + enum uniphier_soc_id ret; + + switch ((revision & SG_REVISION_TYPE_MASK) >> SG_REVISION_TYPE_SHIFT) { +#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD3 + case 0x25: + ret = SOC_UNIPHIER_PH1_SLD3; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_LD4 + case 0x26: + ret = SOC_UNIPHIER_PH1_LD4; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_PRO4 + case 0x28: + ret = SOC_UNIPHIER_PH1_PRO4; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD8 + case 0x29: + ret = SOC_UNIPHIER_PH1_SLD8; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_PRO5 + case 0x2A: + ret = SOC_UNIPHIER_PH1_PRO5; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PROXSTREAM2 + case 0x2E: + ret = SOC_UNIPHIER_PROXSTREAM2; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_LD6B + case 0x2F: + ret = SOC_UNIPHIER_PH1_LD6B; + break; +#endif + default: + ret = SOC_UNIPHIER_UNKNOWN; + break; + } + + return ret; +} +#endif diff --git a/arch/arm/mach-uniphier/spl.c b/arch/arm/mach-uniphier/spl.c deleted file mode 100644 index a34d3a167c..0000000000 --- a/arch/arm/mach-uniphier/spl.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Copyright (C) 2013-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <spl.h> -#include <linux/compiler.h> -#include <mach/led.h> -#include <mach/board.h> - -void __weak bcu_init(void) -{ -}; -void sbc_init(void); -void sg_init(void); -void pll_init(void); -void pin_init(void); -void memconf_init(void); -void early_clkrst_init(void); -void early_pin_init(void); -int umc_init(void); -void enable_dpll_ssc(void); - -void spl_board_init(void) -{ - bcu_init(); - - sbc_init(); - - sg_init(); - - uniphier_board_reset(); - - pll_init(); - - uniphier_board_init(); - - led_write(L, 0, , ); - - memconf_init(); - - led_write(L, 1, , ); - - early_clkrst_init(); - - led_write(L, 2, , ); - - early_pin_init(); - - led_write(L, 3, , ); - -#ifdef CONFIG_SPL_SERIAL_SUPPORT - preloader_console_init(); -#endif - - led_write(L, 4, , ); - - { - int res; - - res = umc_init(); - if (res < 0) { - while (1) - ; - } - } - led_write(L, 5, , ); - - enable_dpll_ssc(); - - led_write(L, 6, , ); -} diff --git a/arch/arm/mach-uniphier/umc/Makefile b/arch/arm/mach-uniphier/umc/Makefile new file mode 100644 index 0000000000..dd35e77dab --- /dev/null +++ b/arch/arm/mach-uniphier/umc/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += umc-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += umc-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += umc-ph1-sld8.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/umc_init.c b/arch/arm/mach-uniphier/umc/umc-ph1-ld4.c index a7a4157e79..81246850b3 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/umc_init.c +++ b/arch/arm/mach-uniphier/umc/umc-ph1-ld4.c @@ -5,7 +5,10 @@ */ #include <common.h> +#include <linux/err.h> #include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> #include <mach/umc-regs.h> #include <mach/ddrphy-regs.h> @@ -136,14 +139,14 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) writel(0x00000101, dramcont0 + UMC_DIOCTLA); - ddrphy_init(phy0_0, freq, size_ch0); + ph1_ld4_ddrphy_init(phy0_0, freq, size_ch0); ddrphy_prepare_training(phy0_0, 0); ddrphy_training(phy0_0); writel(0x00000101, dramcont1 + UMC_DIOCTLA); - ddrphy_init(phy1_0, freq, size_ch1); + ph1_ld4_ddrphy_init(phy1_0, freq, size_ch1); ddrphy_prepare_training(phy1_0, 1); ddrphy_training(phy1_0); @@ -156,16 +159,17 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) return 0; } -int umc_init(void) +int ph1_ld4_umc_init(const struct uniphier_board_data *bd) { - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); + if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) && + (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) && + (bd->dram_freq == 1333 || bd->dram_freq == 1600) && + bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) { + return umc_init_sub(bd->dram_freq, + bd->dram_ch0_size / SZ_128M, + bd->dram_ch1_size / SZ_128M); + } else { + pr_err("Unsupported DDR configuration\n"); + return -EINVAL; + } } - -#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ - (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ - CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 -/* OK */ -#else -#error Unsupported DDR configuration. -#endif diff --git a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c b/arch/arm/mach-uniphier/umc/umc-ph1-pro4.c index bd8b9d83b2..8c9f0579fc 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c +++ b/arch/arm/mach-uniphier/umc/umc-ph1-pro4.c @@ -5,7 +5,10 @@ */ #include <common.h> +#include <linux/err.h> #include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> #include <mach/umc-regs.h> #include <mach/ddrphy-regs.h> @@ -107,28 +110,28 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) writel(0x00000101, dramcont0 + UMC_DIOCTLA); - ddrphy_init(phy0_0, freq, size_ch0); + ph1_pro4_ddrphy_init(phy0_0, freq, size_ch0); ddrphy_prepare_training(phy0_0, 0); ddrphy_training(phy0_0); writel(0x00000103, dramcont0 + UMC_DIOCTLA); - ddrphy_init(phy0_1, freq, size_ch0); + ph1_pro4_ddrphy_init(phy0_1, freq, size_ch0); ddrphy_prepare_training(phy0_1, 1); ddrphy_training(phy0_1); writel(0x00000101, dramcont1 + UMC_DIOCTLA); - ddrphy_init(phy1_0, freq, size_ch1); + ph1_pro4_ddrphy_init(phy1_0, freq, size_ch1); ddrphy_prepare_training(phy1_0, 0); ddrphy_training(phy1_0); writel(0x00000103, dramcont1 + UMC_DIOCTLA); - ddrphy_init(phy1_1, freq, size_ch1); + ph1_pro4_ddrphy_init(phy1_1, freq, size_ch1); ddrphy_prepare_training(phy1_1, 1); ddrphy_training(phy1_1); @@ -141,17 +144,18 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) return 0; } -int umc_init(void) +int ph1_pro4_umc_init(const struct uniphier_board_data *bd) { - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); + if (((bd->dram_ch0_size == SZ_512M && bd->dram_ch0_width == 32) || + (bd->dram_ch0_size == SZ_256M && bd->dram_ch0_width == 16)) && + ((bd->dram_ch1_size == SZ_512M && bd->dram_ch1_width == 32) || + (bd->dram_ch1_size == SZ_256M && bd->dram_ch1_width == 16)) && + bd->dram_freq == 1600) { + return umc_init_sub(bd->dram_freq, + bd->dram_ch0_size / SZ_128M, + bd->dram_ch1_size / SZ_128M); + } else { + pr_err("Unsupported DDR configuration\n"); + return -EINVAL; + } } - -#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ - (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ - ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ - (CONFIG_SDRAM1_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH1 == 1)) -/* OK */ -#else - #error Unsupported DDR configuration. -#endif diff --git a/arch/arm/mach-uniphier/ph1-sld8/umc_init.c b/arch/arm/mach-uniphier/umc/umc-ph1-sld8.c index 7baea7e852..bc60a3472e 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/umc_init.c +++ b/arch/arm/mach-uniphier/umc/umc-ph1-sld8.c @@ -5,7 +5,10 @@ */ #include <common.h> +#include <linux/err.h> #include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> #include <mach/umc-regs.h> #include <mach/ddrphy-regs.h> @@ -116,14 +119,14 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) writel(0x00000101, dramcont0 + UMC_DIOCTLA); - ddrphy_init(phy0_0, freq, size_ch0); + ph1_sld8_ddrphy_init(phy0_0, freq, size_ch0); ddrphy_prepare_training(phy0_0, 0); ddrphy_training(phy0_0); writel(0x00000101, dramcont1 + UMC_DIOCTLA); - ddrphy_init(phy1_0, freq, size_ch1); + ph1_sld8_ddrphy_init(phy1_0, freq, size_ch1); ddrphy_prepare_training(phy1_0, 1); ddrphy_training(phy1_0); @@ -136,16 +139,17 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) return 0; } -int umc_init(void) +int ph1_sld8_umc_init(const struct uniphier_board_data *bd) { - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); + if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) && + (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) && + bd->dram_freq == 1333 && + bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) { + return umc_init_sub(bd->dram_freq, + bd->dram_ch0_size / SZ_128M, + bd->dram_ch1_size / SZ_128M); + } else { + pr_err("Unsupported DDR configuration\n"); + return -EINVAL; + } } - -#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ - (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ - CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 -/* OK */ -#else -#error Unsupported DDR configuration. -#endif diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig deleted file mode 100644 index d2e76f4afc..0000000000 --- a/arch/arm/mach-versatile/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if ARCH_VERSATILE - -config SYS_BOARD - default "versatile" - -config SYS_VENDOR - default "armltd" - -config SYS_SOC - default "versatile" - -config SYS_CONFIG_NAME - default "versatile" - -endif diff --git a/arch/arm/mach-zynq/include/mach/gpio.h b/arch/arm/mach-zynq/include/mach/gpio.h index 9e1e7da203..0789c49736 100644 --- a/arch/arm/mach-zynq/include/mach/gpio.h +++ b/arch/arm/mach-zynq/include/mach/gpio.h @@ -71,6 +71,4 @@ /* GPIO upper 16 bit mask */ #define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000 -#define BIT(x) (1<<x) - #endif /* _ZYNQ_GPIO_H */ diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig index 23ecc895fb..ce58d86512 100644 --- a/arch/powerpc/cpu/ppc4xx/Kconfig +++ b/arch/powerpc/cpu/ppc4xx/Kconfig @@ -8,6 +8,9 @@ choice prompt "Target select" optional +config TARGET_LWMON5 + bool "Support lwmon5" + config TARGET_T3CORP bool "Support t3corp" @@ -165,6 +168,7 @@ source "board/gdsys/405ex/Kconfig" source "board/gdsys/dlvision/Kconfig" source "board/gdsys/gdppc440etx/Kconfig" source "board/gdsys/intip/Kconfig" +source "board/lwmon5/Kconfig" source "board/mosaixtech/icon/Kconfig" source "board/mpl/mip405/Kconfig" source "board/mpl/pip405/Kconfig" diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index 2527ef88de..4090975bf5 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -106,6 +106,12 @@ struct arch_global_data { #ifdef CONFIG_SYS_FPGA_COUNT unsigned fpga_state[CONFIG_SYS_FPGA_COUNT]; #endif +#if defined(CONFIG_WD_MAX_RATE) + unsigned long long wdt_last; /* trace watch-dog triggering rate */ +#endif +#if defined(CONFIG_LWMON5) + unsigned long kbd_status; +#endif }; #include <asm-generic/global_data.h> diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts index 65b9125f5f..08f72aceda 100644 --- a/arch/sandbox/dts/sandbox.dts +++ b/arch/sandbox/dts/sandbox.dts @@ -153,6 +153,10 @@ }; }; + reset@1 { + compatible = "sandbox,reset"; + }; + spi@0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/x86/cpu/quark/dram.c b/arch/x86/cpu/quark/dram.c index 9cac846c69..1b89376387 100644 --- a/arch/x86/cpu/quark/dram.c +++ b/arch/x86/cpu/quark/dram.c @@ -7,8 +7,10 @@ #include <common.h> #include <errno.h> #include <fdtdec.h> +#include <asm/mtrr.h> #include <asm/post.h> #include <asm/arch/mrc.h> +#include <asm/arch/msg_port.h> #include <asm/arch/quark.h> DECLARE_GLOBAL_DATA_PTR; @@ -111,6 +113,14 @@ int dram_init(void) gd->ram_size = mrc_params.mem_size; post_code(POST_DRAM); + /* variable range MTRR#2: RAM area */ + disable_caches(); + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_RAM), + 0 | MTRR_TYPE_WRBACK); + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_RAM), + (~(gd->ram_size - 1)) | MTRR_PHYS_MASK_VALID); + enable_caches(); + return 0; } diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c index 637c370e81..77d644a491 100644 --- a/arch/x86/cpu/quark/quark.c +++ b/arch/x86/cpu/quark/quark.c @@ -6,10 +6,9 @@ #include <common.h> #include <mmc.h> -#include <netdev.h> -#include <phy.h> #include <asm/io.h> #include <asm/irq.h> +#include <asm/mtrr.h> #include <asm/pci.h> #include <asm/post.h> #include <asm/processor.h> @@ -36,6 +35,55 @@ static void unprotect_spi_flash(void) qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, 0xd8, bc); } +static void quark_setup_mtrr(void) +{ + u32 base, mask; + int i; + + disable_caches(); + + /* mark the VGA RAM area as uncacheable */ + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_A0000, + MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE)); + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_B0000, + MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE)); + + /* mark other fixed range areas as cacheable */ + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_00000, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_40000, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_80000, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_90000, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); + for (i = MTRR_FIX_4K_C0000; i <= MTRR_FIX_4K_FC000; i++) + msg_port_write(MSG_PORT_HOST_BRIDGE, i, + MTRR_FIX_TYPE(MTRR_TYPE_WRBACK)); + + /* variable range MTRR#0: ROM area */ + mask = ~(CONFIG_SYS_MONITOR_LEN - 1); + base = CONFIG_SYS_TEXT_BASE & mask; + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ROM), + base | MTRR_TYPE_WRBACK); + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ROM), + mask | MTRR_PHYS_MASK_VALID); + + /* variable range MTRR#1: eSRAM area */ + mask = ~(ESRAM_SIZE - 1); + base = CONFIG_ESRAM_BASE & mask; + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ESRAM), + base | MTRR_TYPE_WRBACK); + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ESRAM), + mask | MTRR_PHYS_MASK_VALID); + + /* enable both variable and fixed range MTRRs */ + msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_DEF_TYPE, + MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN); + + enable_caches(); +} + static void quark_setup_bars(void) { /* GPIO - D31:F0:R44h */ @@ -75,8 +123,6 @@ static void quark_setup_bars(void) static void quark_pcie_early_init(void) { - u32 pcie_cfg; - /* * Step1: Assert PCIe signal PERST# * @@ -86,23 +132,18 @@ static void quark_pcie_early_init(void) board_assert_perst(); /* Step2: PHY common lane reset */ - pcie_cfg = msg_port_alt_read(MSG_PORT_SOC_UNIT, PCIE_CFG); - pcie_cfg |= PCIE_PHY_LANE_RST; - msg_port_alt_write(MSG_PORT_SOC_UNIT, PCIE_CFG, pcie_cfg); + msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_PHY_LANE_RST); /* wait 1 ms for PHY common lane reset */ mdelay(1); /* Step3: PHY sideband interface reset and controller main reset */ - pcie_cfg = msg_port_alt_read(MSG_PORT_SOC_UNIT, PCIE_CFG); - pcie_cfg |= (PCIE_PHY_SB_RST | PCIE_CTLR_MAIN_RST); - msg_port_alt_write(MSG_PORT_SOC_UNIT, PCIE_CFG, pcie_cfg); + msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, + PCIE_PHY_SB_RST | PCIE_CTLR_MAIN_RST); /* wait 80ms for PLL to lock */ mdelay(80); /* Step4: Controller sideband interface reset */ - pcie_cfg = msg_port_alt_read(MSG_PORT_SOC_UNIT, PCIE_CFG); - pcie_cfg |= PCIE_CTLR_SB_RST; - msg_port_alt_write(MSG_PORT_SOC_UNIT, PCIE_CFG, pcie_cfg); + msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_SB_RST); /* wait 20ms for controller sideband interface reset */ mdelay(20); @@ -110,66 +151,80 @@ static void quark_pcie_early_init(void) board_deassert_perst(); /* Step6: Controller primary interface reset */ - pcie_cfg = msg_port_alt_read(MSG_PORT_SOC_UNIT, PCIE_CFG); - pcie_cfg |= PCIE_CTLR_PRI_RST; - msg_port_alt_write(MSG_PORT_SOC_UNIT, PCIE_CFG, pcie_cfg); + msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_PRI_RST); /* Mixer Load Lane 0 */ - pcie_cfg = msg_port_io_read(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L0); - pcie_cfg &= ~((1 << 6) | (1 << 7)); - msg_port_io_write(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L0, pcie_cfg); + msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L0, + (1 << 6) | (1 << 7)); /* Mixer Load Lane 1 */ - pcie_cfg = msg_port_io_read(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L1); - pcie_cfg &= ~((1 << 6) | (1 << 7)); - msg_port_io_write(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L1, pcie_cfg); + msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L1, + (1 << 6) | (1 << 7)); } static void quark_usb_early_init(void) { - u32 usb; - /* The sequence below comes from Quark firmware writer guide */ - usb = msg_port_alt_read(MSG_PORT_USB_AFE, USB2_GLOBAL_PORT); - usb &= ~(1 << 1); - usb |= ((1 << 6) | (1 << 7)); - msg_port_alt_write(MSG_PORT_USB_AFE, USB2_GLOBAL_PORT, usb); + msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_GLOBAL_PORT, + 1 << 1, (1 << 6) | (1 << 7)); - usb = msg_port_alt_read(MSG_PORT_USB_AFE, USB2_COMPBG); - usb &= ~((1 << 8) | (1 << 9)); - usb |= ((1 << 7) | (1 << 10)); - msg_port_alt_write(MSG_PORT_USB_AFE, USB2_COMPBG, usb); + msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_COMPBG, + (1 << 8) | (1 << 9), (1 << 7) | (1 << 10)); - usb = msg_port_alt_read(MSG_PORT_USB_AFE, USB2_PLL2); - usb |= (1 << 29); - msg_port_alt_write(MSG_PORT_USB_AFE, USB2_PLL2, usb); + msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29); - usb = msg_port_alt_read(MSG_PORT_USB_AFE, USB2_PLL1); - usb |= (1 << 1); - msg_port_alt_write(MSG_PORT_USB_AFE, USB2_PLL1, usb); + msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL1, 1 << 1); - usb = msg_port_alt_read(MSG_PORT_USB_AFE, USB2_PLL1); - usb &= ~((1 << 3) | (1 << 4) | (1 << 5)); - usb |= (1 << 6); - msg_port_alt_write(MSG_PORT_USB_AFE, USB2_PLL1, usb); + msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_PLL1, + (1 << 3) | (1 << 4) | (1 << 5), 1 << 6); - usb = msg_port_alt_read(MSG_PORT_USB_AFE, USB2_PLL2); - usb &= ~(1 << 29); - msg_port_alt_write(MSG_PORT_USB_AFE, USB2_PLL2, usb); + msg_port_alt_clrbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29); - usb = msg_port_alt_read(MSG_PORT_USB_AFE, USB2_PLL2); - usb |= (1 << 24); - msg_port_alt_write(MSG_PORT_USB_AFE, USB2_PLL2, usb); + msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 24); } -static void quark_enable_legacy_seg(void) +static void quark_thermal_early_init(void) { - u32 hmisc2; + /* The sequence below comes from Quark firmware writer guide */ + + /* thermal sensor mode config */ + msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1, + (1 << 3) | (1 << 4) | (1 << 5), 1 << 5); + msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1, + (1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) | + (1 << 12), 1 << 9); + msg_port_alt_setbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 14); + msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 17); + msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 18); + msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG2, 0xffff, 0x011f); + msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff, 0x17); + msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3, + (1 << 8) | (1 << 9), 1 << 8); + msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff000000); + msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG4, + 0x7ff800, 0xc8 << 11); + + /* thermal monitor catastrophic trip set point (105 celsius) */ + msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff, 155); + + /* thermal monitor catastrophic trip clear point (0 celsius) */ + msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff0000, 50 << 16); + + /* take thermal sensor out of reset */ + msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG4, 1 << 0); + + /* enable thermal monitor */ + msg_port_setbits(MSG_PORT_RMU, TS_MODE, 1 << 15); + + /* lock all thermal configuration */ + msg_port_setbits(MSG_PORT_RMU, RMU_CTRL, (1 << 5) | (1 << 6)); +} - hmisc2 = msg_port_read(MSG_PORT_HOST_BRIDGE, HMISC2); - hmisc2 |= (HMISC2_SEGE | HMISC2_SEGF | HMISC2_SEGAB); - msg_port_write(MSG_PORT_HOST_BRIDGE, HMISC2, hmisc2); +static void quark_enable_legacy_seg(void) +{ + msg_port_setbits(MSG_PORT_HOST_BRIDGE, HMISC2, + HMISC2_SEGE | HMISC2_SEGF | HMISC2_SEGAB); } int arch_cpu_init(void) @@ -186,6 +241,13 @@ int arch_cpu_init(void) return ret; /* + * Quark SoC does not support MSR MTRRs. Fixed and variable range MTRRs + * are accessed indirectly via the message port and not the traditional + * MSR mechanism. Only UC, WT and WB cache types are supported. + */ + quark_setup_mtrr(); + + /* * Quark SoC has some non-standard BARs (excluding PCI standard BARs) * which need be initialized with suggested values */ @@ -205,6 +267,9 @@ int arch_cpu_init(void) /* Initialize USB2 PHY */ quark_usb_early_init(); + /* Initialize thermal sensor */ + quark_thermal_early_init(); + /* Turn on legacy segments (A/B/E/F) decode to system RAM */ quark_enable_legacy_seg(); @@ -225,27 +290,57 @@ void reset_cpu(ulong addr) x86_full_reset(); } -int cpu_mmc_init(bd_t *bis) +static void quark_pcie_init(void) { - return pci_mmc_init("Quark SDHCI", mmc_supported, - ARRAY_SIZE(mmc_supported)); + u32 val; + + /* PCIe upstream non-posted & posted request size */ + qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_CCFG, + CCFG_UPRS | CCFG_UNRS); + qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_CCFG, + CCFG_UPRS | CCFG_UNRS); + + /* PCIe packet fast transmit mode (IPF) */ + qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MPC2, MPC2_IPF); + qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MPC2, MPC2_IPF); + + /* PCIe message bus idle counter (SBIC) */ + qrk_pci_read_config_dword(QUARK_PCIE0, PCIE_RP_MBC, &val); + val |= MBC_SBIC; + qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MBC, val); + qrk_pci_read_config_dword(QUARK_PCIE1, PCIE_RP_MBC, &val); + val |= MBC_SBIC; + qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MBC, val); } -int cpu_eth_init(bd_t *bis) +static void quark_usb_init(void) { - u32 base; - int ret0, ret1; + u32 bar; - qrk_pci_read_config_dword(QUARK_EMAC0, PCI_BASE_ADDRESS_0, &base); - ret0 = designware_initialize(base, PHY_INTERFACE_MODE_RMII); + /* Change USB EHCI packet buffer OUT/IN threshold */ + qrk_pci_read_config_dword(QUARK_USB_EHCI, PCI_BASE_ADDRESS_0, &bar); + writel((0x7f << 16) | 0x7f, bar + EHCI_INSNREG01); - qrk_pci_read_config_dword(QUARK_EMAC1, PCI_BASE_ADDRESS_0, &base); - ret1 = designware_initialize(base, PHY_INTERFACE_MODE_RMII); + /* Disable USB device interrupts */ + qrk_pci_read_config_dword(QUARK_USB_DEVICE, PCI_BASE_ADDRESS_0, &bar); + writel(0x7f, bar + USBD_INT_MASK); + writel((0xf << 16) | 0xf, bar + USBD_EP_INT_MASK); + writel((0xf << 16) | 0xf, bar + USBD_EP_INT_STS); +} - if (ret0 < 0 && ret1 < 0) - return -1; - else - return 0; +int arch_early_init_r(void) +{ + quark_pcie_init(); + + quark_usb_init(); + + return 0; +} + +int cpu_mmc_init(bd_t *bis) +{ + return pci_mmc_init("Quark SDHCI", mmc_supported, + ARRAY_SIZE(mmc_supported)); } void cpu_irq_init(void) @@ -275,3 +370,23 @@ int arch_misc_init(void) { return pirq_init(); } + +void board_final_cleanup(void) +{ + struct quark_rcba *rcba; + u32 base, val; + + qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base); + base &= ~MEM_BAR_EN; + rcba = (struct quark_rcba *)base; + + /* Initialize 'Component ID' to zero */ + val = readl(&rcba->esd); + val &= ~0xff0000; + writel(val, &rcba->esd); + + /* Lock HMBOUND for security */ + msg_port_setbits(MSG_PORT_HOST_BRIDGE, HM_BOUND, HM_BOUND_LOCK); + + return; +} diff --git a/arch/x86/dts/galileo.dts b/arch/x86/dts/galileo.dts index f119bf7f42..a4e16760d5 100644 --- a/arch/x86/dts/galileo.dts +++ b/arch/x86/dts/galileo.dts @@ -92,6 +92,18 @@ PCI_BDF(0, 21, 0) INTA PIRQE PCI_BDF(0, 21, 1) INTB PIRQF PCI_BDF(0, 21, 2) INTC PIRQG + PCI_BDF(0, 23, 0) INTA PIRQA + PCI_BDF(0, 23, 1) INTB PIRQB + + /* PCIe root ports downstream interrupts */ + PCI_BDF(1, 0, 0) INTA PIRQA + PCI_BDF(1, 0, 0) INTB PIRQB + PCI_BDF(1, 0, 0) INTC PIRQC + PCI_BDF(1, 0, 0) INTD PIRQD + PCI_BDF(2, 0, 0) INTA PIRQB + PCI_BDF(2, 0, 0) INTB PIRQC + PCI_BDF(2, 0, 0) INTC PIRQD + PCI_BDF(2, 0, 0) INTD PIRQA >; }; }; diff --git a/arch/x86/include/asm/arch-quark/msg_port.h b/arch/x86/include/asm/arch-quark/msg_port.h index 2e78a66725..313e23fe08 100644 --- a/arch/x86/include/asm/arch-quark/msg_port.h +++ b/arch/x86/include/asm/arch-quark/msg_port.h @@ -101,6 +101,37 @@ u32 msg_port_io_read(u8 port, u32 reg); */ void msg_port_io_write(u8 port, u32 reg, u32 value); +/* clrbits, setbits, clrsetbits macros for message port access */ + +#define msg_port_normal_read msg_port_read +#define msg_port_normal_write msg_port_write + +#define msg_port_generic_clrsetbits(type, port, reg, clr, set) \ + msg_port_##type##_write(port, reg, \ + (msg_port_##type##_read(port, reg) \ + & ~(clr)) | (set)) + +#define msg_port_clrbits(port, reg, clr) \ + msg_port_generic_clrsetbits(normal, port, reg, clr, 0) +#define msg_port_setbits(port, reg, set) \ + msg_port_generic_clrsetbits(normal, port, reg, 0, set) +#define msg_port_clrsetbits(port, reg, clr, set) \ + msg_port_generic_clrsetbits(normal, port, reg, clr, set) + +#define msg_port_alt_clrbits(port, reg, clr) \ + msg_port_generic_clrsetbits(alt, port, reg, clr, 0) +#define msg_port_alt_setbits(port, reg, set) \ + msg_port_generic_clrsetbits(alt, port, reg, 0, set) +#define msg_port_alt_clrsetbits(port, reg, clr, set) \ + msg_port_generic_clrsetbits(alt, port, reg, clr, set) + +#define msg_port_io_clrbits(port, reg, clr) \ + msg_port_generic_clrsetbits(io, port, reg, clr, 0) +#define msg_port_io_setbits(port, reg, set) \ + msg_port_generic_clrsetbits(io, port, reg, 0, set) +#define msg_port_io_clrsetbits(port, reg, clr, set) \ + msg_port_generic_clrsetbits(io, port, reg, clr, set) + #endif /* __ASSEMBLY__ */ #endif /* _QUARK_MSG_PORT_H_ */ diff --git a/arch/x86/include/asm/arch-quark/quark.h b/arch/x86/include/asm/arch-quark/quark.h index 5d81976998..7a864c7c53 100644 --- a/arch/x86/include/asm/arch-quark/quark.h +++ b/arch/x86/include/asm/arch-quark/quark.h @@ -32,18 +32,71 @@ /* Host Memory I/O Boundary */ #define HM_BOUND 0x08 +#define HM_BOUND_LOCK 0x00000001 /* Extended Configuration Space */ #define HEC_REG 0x09 +/* MTRR Registers */ +#define MTRR_CAP 0x40 +#define MTRR_DEF_TYPE 0x41 + +#define MTRR_FIX_64K_00000 0x42 +#define MTRR_FIX_64K_40000 0x43 +#define MTRR_FIX_16K_80000 0x44 +#define MTRR_FIX_16K_90000 0x45 +#define MTRR_FIX_16K_A0000 0x46 +#define MTRR_FIX_16K_B0000 0x47 +#define MTRR_FIX_4K_C0000 0x48 +#define MTRR_FIX_4K_C4000 0x49 +#define MTRR_FIX_4K_C8000 0x4a +#define MTRR_FIX_4K_CC000 0x4b +#define MTRR_FIX_4K_D0000 0x4c +#define MTRR_FIX_4K_D4000 0x4d +#define MTRR_FIX_4K_D8000 0x4e +#define MTRR_FIX_4K_DC000 0x4f +#define MTRR_FIX_4K_E0000 0x50 +#define MTRR_FIX_4K_E4000 0x51 +#define MTRR_FIX_4K_E8000 0x52 +#define MTRR_FIX_4K_EC000 0x53 +#define MTRR_FIX_4K_F0000 0x54 +#define MTRR_FIX_4K_F4000 0x55 +#define MTRR_FIX_4K_F8000 0x56 +#define MTRR_FIX_4K_FC000 0x57 + +#define MTRR_SMRR_PHYBASE 0x58 +#define MTRR_SMRR_PHYMASK 0x59 + +#define MTRR_VAR_PHYBASE(n) (0x5a + 2 * (n)) +#define MTRR_VAR_PHYMASK(n) (0x5b + 2 * (n)) + +#ifndef __ASSEMBLY__ + +/* variable range MTRR usage */ +enum { + MTRR_VAR_ROM, + MTRR_VAR_ESRAM, + MTRR_VAR_RAM +}; + +#endif /* __ASSEMBLY__ */ + /* Port 0x04: Remote Management Unit Message Port Registers */ /* ACPI PBLK Base Address Register */ #define PBLK_BA 0x70 +/* Control Register */ +#define RMU_CTRL 0x71 + /* SPI DMA Base Address Register */ #define SPI_DMA_BA 0x7a +/* Thermal Sensor Register */ +#define TS_MODE 0xb0 +#define TS_TEMP 0xb1 +#define TS_TRIP 0xb2 + /* Port 0x05: Memory Manager Message Port Registers */ /* eSRAM Block Page Control */ @@ -64,6 +117,12 @@ /* Port 0x31: SoC Unit Port Registers */ +/* Thermal Sensor Config */ +#define TS_CFG1 0x31 +#define TS_CFG2 0x32 +#define TS_CFG3 0x33 +#define TS_CFG4 0x34 + /* PCIe Controller Config */ #define PCIE_CFG 0x36 #define PCIE_CTLR_PRI_RST 0x00010000 @@ -88,6 +147,20 @@ /* 64KiB of RMU binary in flash */ #define RMU_BINARY_SIZE 0x10000 +/* PCIe Root Port Configuration Registers */ + +#define PCIE_RP_CCFG 0xd0 +#define CCFG_UPRS (1 << 14) +#define CCFG_UNRS (1 << 15) +#define CCFG_UNSD (1 << 23) +#define CCFG_UPSD (1 << 24) + +#define PCIE_RP_MPC2 0xd4 +#define MPC2_IPF (1 << 11) + +#define PCIE_RP_MBC 0xf4 +#define MBC_SBIC (3 << 16) + /* Legacy Bridge PCI Configuration Registers */ #define LB_GBA 0x44 #define LB_PM1BLK 0x48 @@ -100,6 +173,14 @@ #define LB_BC 0xd8 #define LB_RCBA 0xf0 +/* USB EHCI memory-mapped registers */ +#define EHCI_INSNREG01 0x94 + +/* USB device memory-mapped registers */ +#define USBD_INT_MASK 0x410 +#define USBD_EP_INT_STS 0x414 +#define USBD_EP_INT_MASK 0x418 + #ifndef __ASSEMBLY__ /* Root Complex Register Block */ diff --git a/arch/x86/lib/fsp/fsp_dram.c b/arch/x86/lib/fsp/fsp_dram.c index 28552fa15a..e51ca96eb7 100644 --- a/arch/x86/lib/fsp/fsp_dram.c +++ b/arch/x86/lib/fsp/fsp_dram.c @@ -72,9 +72,10 @@ unsigned install_e820_map(unsigned max_entries, struct e820entry *entries) entries[num_entries].type = E820_RAM; else if (res_desc->type == RES_MEM_RESERVED) entries[num_entries].type = E820_RESERVED; + + num_entries++; } hdr = get_next_hob(hdr); - num_entries++; } /* Mark PCIe ECAM address range as reserved */ diff --git a/board/BuR/kwb/board.c b/board/BuR/kwb/board.c index 640aca4cde..039ec207c2 100644 --- a/board/BuR/kwb/board.c +++ b/board/BuR/kwb/board.c @@ -283,16 +283,6 @@ int board_late_init(void) } /* setup vxworks bootline */ char *vxworksbootline = (char *)VXWORKS_BOOTLINE; - - /* setup default IP, in case if there is nothing in environment */ - if (!getenv("ipaddr")) { - setenv("ipaddr", "192.168.60.1"); - setenv("netmask", "255.255.255.0"); - setenv("serverip", "192.168.60.254"); - setenv("gatewayip", "192.168.60.254"); - puts("net: had no IP! made default setup.\n"); - } - sprintf(vxworksbootline, "%s h=%s e=%s:%s g=%s %s o=0x%08x;0x%08x;0x%08x;0x%08x", DEFAULT_BOOTLINE, diff --git a/board/BuS/eb_cpux9k2/Kconfig b/board/BuS/eb_cpux9k2/Kconfig deleted file mode 100644 index e2a787a1a8..0000000000 --- a/board/BuS/eb_cpux9k2/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_EB_CPUX9K2 - -config SYS_BOARD - default "eb_cpux9k2" - -config SYS_VENDOR - default "BuS" - -config SYS_CONFIG_NAME - default "eb_cpux9k2" - -endif diff --git a/board/BuS/eb_cpux9k2/MAINTAINERS b/board/BuS/eb_cpux9k2/MAINTAINERS deleted file mode 100644 index 81c4349ac9..0000000000 --- a/board/BuS/eb_cpux9k2/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -EB_CPUX9K2 BOARD -M: Jens Scharsig <esw@bus-elektronik.de> -S: Maintained -F: board/BuS/eb_cpux9k2/ -F: include/configs/eb_cpux9k2.h -F: configs/eb_cpux9k2_defconfig -F: configs/eb_cpux9k2_ram_defconfig diff --git a/board/BuS/eb_cpux9k2/Makefile b/board/BuS/eb_cpux9k2/Makefile deleted file mode 100644 index b2ec389ab9..0000000000 --- a/board/BuS/eb_cpux9k2/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := cpux9k2.o diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c deleted file mode 100644 index 3880a06897..0000000000 --- a/board/BuS/eb_cpux9k2/cpux9k2.c +++ /dev/null @@ -1,373 +0,0 @@ -/* - * (C) Copyright 2008-2009 - * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de> - * Jens Scharsig <esw@bus-elektronik.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <exports.h> -#include <net.h> -#include <netdev.h> -#include <nand.h> - -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_mc.h> -#include <asm/arch/at91_common.h> - -#ifdef CONFIG_STATUS_LED -#include <status_led.h> -#endif - -#ifdef CONFIG_VIDEO -#include <bus_vcxk.h> - -extern unsigned long display_width; -extern unsigned long display_height; -#endif - -#ifdef CONFIG_CMD_NAND -void cpux9k2_nand_hw_init(void); -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init(void) -{ - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - - /* Correct IRDA resistor problem / Set PA23_TXD in Output */ - writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer); - - gd->bd->bi_arch_number = MACH_TYPE_EB_CPUX9K2; - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - -#ifdef CONFIG_STATUS_LED - status_led_set(STATUS_LED_BOOT, STATUS_LED_ON); -#endif -#ifdef CONFIG_CMD_NAND - cpux9k2_nand_hw_init(); -#endif - return 0; -} - -int board_early_init_f(void) -{ - at91_seriald_hw_init(); - return 0; -} - -#ifdef CONFIG_MISC_INIT_R - -int misc_init_r(void) -{ - uchar mac[8]; - uchar tm; - uchar midx; - uchar macn6, macn7; - - if (getenv("ethaddr") == NULL) { - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x00, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, - (uchar *) &mac, sizeof(mac)) != 0) { - puts("Error reading MAC from EEPROM\n"); - } else { - tm = 0; - macn6 = 0; - macn7 = 0xFF; - for (midx = 0; midx < 6; midx++) { - if ((mac[midx] != 0) && (mac[midx] != 0xFF)) - tm++; - macn6 += mac[midx]; - macn7 ^= mac[midx]; - } - if ((macn6 != mac[6]) || (macn7 != mac[7])) - tm = 0; - if (tm) - eth_setenv_enetaddr("ethaddr", mac); - else - puts("Error: invalid MAC at EEPROM\n"); - } - } - gd->jt->do_reset = do_reset; - -#ifdef CONFIG_STATUS_LED - status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING); -#endif - return 0; -} -#endif - -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ - udelay(10000); - eth_init(); -} -#endif - -/* - * DRAM initialisations - */ - -int dram_init(void) -{ - gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -/* - * Ethernet initialisations - */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, (u32) ATMEL_BASE_EMAC); - return rc; -} -#endif - -/* - * Disk On Chip (NAND) Millenium initialization. - * The NAND lives in the CS2* space - */ -#if defined(CONFIG_CMD_NAND) - -#define MASK_ALE (1 << 22) /* our ALE is AD22 */ -#define MASK_CLE (1 << 21) /* our CLE is AD21 */ - -void cpux9k2_nand_hw_init(void) -{ - unsigned long csr; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC; - - /* Setup Smart Media, fitst enable the address range of CS3 */ - writel(readl(&mc->ebi.csa) | AT91_EBI_CSA_CS3A, &mc->ebi.csa); - - /* RWH = 1 | RWS = 0 | TDF = 1 | NWS = 3 */ - csr = AT91_SMC_CSR_RWHOLD(1) | AT91_SMC_CSR_TDF(1) | - AT91_SMC_CSR_NWS(3) | - AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_8 | - AT91_SMC_CSR_WSEN; - writel(csr, &mc->smc.csr[3]); - - writel(ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE, &pio->pioc.asr); - writel(ATMEL_PMX_CA_BFCK | ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE, - &pio->pioc.pdr); - - /* Configure PC2 as input (signal Nand READY ) */ - writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.per); - writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */ - writel(ATMEL_PMX_CA_BFCK, &pio->pioc.codr); - - /* PIOC clock enabling */ - writel(1 << ATMEL_ID_PIOC, &pmc->pcer); -} - -static void board_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - struct nand_chip *this = mtd->priv; - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - - if (ctrl & NAND_CTRL_CHANGE) { - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - if ((ctrl & NAND_NCE)) - writel(1, &pio->pioc.codr); - else - writel(1, &pio->pioc.sodr); - - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int board_nand_dev_ready(struct mtd_info *mtd) -{ - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - return ((readl(&pio->pioc.pdsr) & (1 << 2)) != 0); -} - -int board_nand_init(struct nand_chip *nand) -{ - cpux9k2_nand_hw_init(); - nand->ecc.mode = NAND_ECC_SOFT; - nand->cmd_ctrl = board_nand_hwcontrol; - nand->dev_ready = board_nand_dev_ready; - nand->chip_delay = 20; - return 0; -} - -#endif - -#if defined(CONFIG_VIDEO) -/* - * drv_video_init - * FUNCTION: initialize VCxK device - */ - -int drv_video_init(void) -{ -#ifdef CONFIG_SPLASH_SCREEN - unsigned long splash; -#endif - char *s; - unsigned long csr; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC; - - printf("Init Video as "); - s = getenv("displaywidth"); - if (s != NULL) - display_width = simple_strtoul(s, NULL, 10); - else - display_width = 256; - s = getenv("displayheight"); - if (s != NULL) - display_height = simple_strtoul(s, NULL, 10); - else - display_height = 256; - printf("%ld x %ld pixel matrix\n", display_width, display_height); - - /* RWH = 2 | RWS =2 | TDF = 4 | NWS = 0x6 */ - csr = AT91_SMC_CSR_RWHOLD(2) | AT91_SMC_CSR_RWSETUP(2) | - AT91_SMC_CSR_TDF(4) | AT91_SMC_CSR_NWS(6) | - AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 | - AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN; - writel(csr, &mc->smc.csr[2]); - writel(1 << ATMEL_ID_PIOB, &pmc->pcer); - - vcxk_init(display_width, display_height); -#ifdef CONFIG_SPLASH_SCREEN - s = getenv("splashimage"); - if (s != NULL) { - splash = simple_strtoul(s, NULL, 16); - printf("use splashimage: %lx\n", splash); - video_display_bitmap(splash, 0, 0); - } -#endif - return 0; -} -#endif - -#ifdef CONFIG_SYS_I2C_SOFT - -void i2c_init_board(void) -{ - u32 pin; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - - writel(1 << ATMEL_ID_PIOA, &pmc->pcer); - pin = ATMEL_PMX_AA_TWD | ATMEL_PMX_AA_TWCK; - writel(pin, &pio->pioa.idr); - writel(pin, &pio->pioa.pudr); - writel(pin, &pio->pioa.per); - writel(pin, &pio->pioa.oer); - writel(pin, &pio->pioa.sodr); -} - -#endif - -/*--------------------------------------------------------------------------*/ - -#ifdef CONFIG_STATUS_LED - -void __led_toggle(led_id_t mask) -{ - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - - if (readl(&pio->piod.odsr) & mask) - writel(mask, &pio->piod.codr); - else - writel(mask, &pio->piod.codr); -} - -void __led_init(led_id_t mask, int state) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - - writel(1 << ATMEL_ID_PIOD, &pmc->pcer); /* Enable PIOB clock */ - /* Disable peripherals on LEDs */ - writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.per); - /* Enable pins as outputs */ - writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.oer); - /* Turn all LEDs OFF */ - writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.sodr); - - __led_set(mask, state); -} - -void __led_set(led_id_t mask, int state) -{ - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - if (state == STATUS_LED_ON) - writel(mask, &pio->piod.codr); - else - writel(mask, &pio->piod.sodr); -} - -#endif - -/*---------------------------------------------------------------------------*/ - -int do_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int rcode = 0; - ulong side; - ulong bright; - - switch (argc) { - case 3: - side = simple_strtoul(argv[1], NULL, 10); - bright = simple_strtoul(argv[2], NULL, 10); - if ((side >= 0) && (side <= 3) && - (bright >= 0) && (bright <= 1000)) { - vcxk_setbrightness(side, bright); - rcode = 0; - } else { - printf("parameters out of range\n"); - printf("Usage:\n%s\n", cmdtp->usage); - rcode = 1; - } - break; - default: - printf("Usage:\n%s\n", cmdtp->usage); - rcode = 1; - break; - } - return rcode; -} - -/*---------------------------------------------------------------------------*/ - -U_BOOT_CMD( - bright, 3, 0, do_brightness, - "bright - sets the display brightness\n", - " <side> <0..1000>\n side: 0/3=both; 1=first; 2=second\n" -); - -/* EOF cpu9k2.c */ diff --git a/board/BuS/vl_ma2sc/Kconfig b/board/BuS/vl_ma2sc/Kconfig deleted file mode 100644 index 848177f4c4..0000000000 --- a/board/BuS/vl_ma2sc/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_VL_MA2SC - -config SYS_BOARD - default "vl_ma2sc" - -config SYS_VENDOR - default "BuS" - -config SYS_CONFIG_NAME - default "vl_ma2sc" - -endif diff --git a/board/BuS/vl_ma2sc/MAINTAINERS b/board/BuS/vl_ma2sc/MAINTAINERS deleted file mode 100644 index b70104d52e..0000000000 --- a/board/BuS/vl_ma2sc/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -VL_MA2SC BOARD -M: Jens Scharsig <esw@bus-elektronik.de> -S: Maintained -F: board/BuS/vl_ma2sc/ -F: include/configs/vl_ma2sc.h -F: configs/vl_ma2sc_defconfig -F: configs/vl_ma2sc_ram_defconfig diff --git a/board/BuS/vl_ma2sc/Makefile b/board/BuS/vl_ma2sc/Makefile deleted file mode 100644 index d4b24ac8c2..0000000000 --- a/board/BuS/vl_ma2sc/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2009-2012 -# Jens Scharsig <esw@bus-elekronik.de> -# BuS Elektronik GmbH & Co. KG -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += vl_ma2sc.o diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c deleted file mode 100644 index e4e1a8572f..0000000000 --- a/board/BuS/vl_ma2sc/vl_ma2sc.c +++ /dev/null @@ -1,519 +0,0 @@ -/* - * (C) Copyright 2009-2012 - * Jens Scharsig <esw@bus-elekronik.de> - * BuS Elektronik GmbH & Co. KG - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <linux/sizes.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/arch/hardware.h> -#include <asm/arch/clk.h> -#include <asm/arch/at91_matrix.h> -#include <asm/arch/at91sam9_smc.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/at91sam9263.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91_common.h> -#include <lcd.h> -#include <i2c.h> -#include <atmel_lcdc.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include <net.h> -#endif -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_CMD_NAND -static void vl_ma2sc_nand_hw_init(void) -{ - unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0; - at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_pio_output(AT91_PIO_PORTA, 13, 1); /* CAN_TX -> H */ - at91_set_pio_output(AT91_PIO_PORTA, 12, 1); /* CAN_STB -> H */ - at91_set_pio_output(AT91_PIO_PORTA, 11, 1); /* CAN_EN -> H */ - - /* Enable CS3 */ - csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; - writel(csa, &matrix->csa[0]); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[3].setup); - - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(2), - &smc->cs[3].mode); - writel((1 << ATMEL_ID_PIOB) | (1 << ATMEL_ID_PIOCDE), - &pmc->pcer); - - /* Configure RDY/BSY */ -#ifdef CONFIG_SYS_NAND_READY_PIN - gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); -#endif - /* Enable NandFlash */ - gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} -#endif - -#ifdef CONFIG_MACB -static void vl_ma2sc_macb_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); - - at91_phy_reset(); - - at91_macb_hw_init(); -} -#endif - -#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 320, - .vl_row = 240, - .vl_clk = 6500000, - .vl_sync = ATMEL_LCDC_INVDVAL_INVERTED | - ATMEL_LCDC_INVLINE_INVERTED | - ATMEL_LCDC_INVVD_INVERTED | - ATMEL_LCDC_INVFRAME_INVERTED, - .vl_bpix = (ATMEL_LCDC_PIXELSIZE_8 >> 5), - .vl_tft = 1, - .vl_hsync_len = 5, /* Horiz Sync Pulse Width */ - .vl_left_margin = 68, /* horiz back porch */ - .vl_right_margin = 20, /* horiz front porch */ - .vl_vsync_len = 2, /* vert Sync Pulse Width */ - .vl_upper_margin = 18, /* vert back porch */ - .vl_lower_margin = 4, /* vert front porch */ - .mmio = ATMEL_BASE_LCDC, -}; - -void lcd_enable(void) -{ -} - -void lcd_disable(void) -{ -} - -static void vl_ma2sc_lcd_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */ - at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */ - - at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD0 */ - at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD1 */ - at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */ - - at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD9 */ - at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */ - at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */ - - at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD26 */ - at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD17 */ - at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */ - at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */ - at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */ - at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */ - at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ - at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ - - at91_set_pio_output(AT91_PIO_PORTE, 0, 0); /* LCD QXH */ - - at91_set_pio_output(AT91_PIO_PORTE, 2, 0); /* LCD SHUT */ - at91_set_pio_output(AT91_PIO_PORTE, 3, 1); /* LCD TopBottom */ - at91_set_pio_output(AT91_PIO_PORTE, 4, 0); /* LCD REV */ - at91_set_pio_output(AT91_PIO_PORTE, 5, 1); /* LCD RightLeft */ - at91_set_pio_output(AT91_PIO_PORTE, 6, 0); /* LCD Color Mode CM */ - at91_set_pio_output(AT91_PIO_PORTE, 7, 0); /* LCD BGR */ - - at91_set_pio_output(AT91_PIO_PORTB, 9, 0); /* LCD CC */ - - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); - gd->fb_base = ATMEL_BASE_SRAM0; -} -#endif /* Config LCD */ - -#ifdef CONFIG_BOARD_EARLY_INIT_F -int board_early_init_f(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOCDE), - &pmc->pcer); - - at91_seriald_hw_init(); - - return 0; -} -#endif - -int board_init(void) -{ - at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - u32 pin; - - pin = 0x1F000001; - writel(pin, &pio->pioa.idr); - writel(pin, &pio->pioa.pudr); - writel(pin, &pio->pioa.per); - writel(pin, &pio->pioa.oer); - writel(pin, &pio->pioa.sodr); - writel((1 << 25), &pio->pioa.codr); - - pin = 0x1F000100; - writel(pin, &pio->piob.idr); - writel(pin, &pio->piob.pudr); - writel(pin, &pio->piob.per); - writel(pin, &pio->piob.oer); - writel(pin, &pio->piob.codr); - writel((1 << 24), &pio->piob.sodr); - - pin = 0x40000000; /* Pullup DRxD enbable */ - writel(pin, &pio->pioc.puer); - - pin = 0x0000000F; /* HWversion als Input */ - writel(pin, &pio->piod.idr); - writel(pin, &pio->piod.puer); - writel(pin, &pio->piod.per); - writel(pin, &pio->piod.odr); - writel(pin, &pio->piod.owdr); - - gd->bd->bi_arch_number = MACH_TYPE_VL_MA2SC; - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - writel(CONFIG_SYS_SMC0_MODE0_VAL, &smc->cs[0].setup); - writel(CONFIG_SYS_SMC0_CYCLE0_VAL, &smc->cs[0].cycle); - writel(CONFIG_SYS_SMC0_PULSE0_VAL, &smc->cs[0].pulse); - writel(CONFIG_SYS_SMC0_SETUP0_VAL, &smc->cs[0].setup); - -#ifdef CONFIG_CMD_NAND - vl_ma2sc_nand_hw_init(); -#endif -#ifdef CONFIG_MACB - vl_ma2sc_macb_hw_init(); -#endif -#ifdef CONFIG_USB_OHCI_NEW - at91_uhp_hw_init(); -#endif -#ifdef CONFIG_LCD - vl_ma2sc_lcd_hw_init(); -#endif - return 0; -} - -#ifdef CONFIG_MISC_INIT_R -int misc_init_r(void) -{ - uchar buffer[8]; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - u32 pin; - - buffer[0] = 0x04; - buffer[1] = 0x00; - if (i2c_write(0x68, 0x0E, 1, buffer, 2) != 0) - puts("error reseting rtc clock\n\0"); - - /* read hardware version */ - - pin = (readl(&pio->piod.pdsr) & 0x0F) + 0x44; - printf("Board: revision %c\n", pin); - buffer[0] = pin; - buffer[1] = 0; - setenv("revision", (char *) buffer); - - pin = 0x40000000; /* Pullup DRxD enbable */ - writel(pin, &pio->pioc.puer); - return 0; -} -#endif - -int dram_init(void) -{ - gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(); -#endif -} -#endif - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *) ATMEL_BASE_EMAC, 0x01); -#endif - return rc; -} - -#ifdef CONFIG_SYS_I2C_SOFT -void i2c_init_board(void) -{ - u32 pin; - - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - u8 sda = (1<<4); - u8 scl = (1<<5); - - writel(1 << ATMEL_ID_PIOB, &pmc->pcer); - pin = sda | scl; - writel(pin, &pio->piob.idr); /* Disable Interupt */ - writel(pin, &pio->piob.pudr); - writel(pin, &pio->piob.per); - writel(pin, &pio->piob.oer); - writel(pin, &pio->piob.sodr); -} -#endif - -void watchdog_reset(void) -{ - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - u32 pin = 0x1; /* PA0 */ - - if ((readl(&pio->pioa.odsr) & pin) > 0) - writel(pin, &pio->pioa.codr); - else - writel(pin, &pio->pioa.sodr); -} - -void enable_caches(void) -{ -#ifndef CONFIG_SYS_DCACHE_OFF - dcache_enable(); -#endif -} - -/*---------------------------------------------------------------------------*/ - -int do_ledtest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int rcode = 1; - int row; - int col; - u32 pinz; - u32 pins; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - - at91_set_pio_output(AT91_PIO_PORTB, 8, 0); /* LCD DIM */ - - pins = 0x1F000000; - writel(pins, &pio->pioa.idr); - writel(pins, &pio->pioa.pudr); - writel(pins, &pio->pioa.per); - writel(pins, &pio->pioa.oer); - writel(pins, &pio->pioa.sodr); - - pinz = 0x1F000000; - writel(pinz, &pio->piob.idr); - writel(pinz, &pio->piob.pudr); - writel(pinz, &pio->piob.per); - writel(pinz, &pio->piob.oer); - writel(pinz, &pio->piob.sodr); - - for (row = 0; row < 5; row++) { - for (col = 0; col < 5; col++) { - writel((0x01000000 << col), &pio->piob.sodr); - writel((0x01000000 << row), &pio->pioa.codr); - printf("LED Test %d x %d\n", row, col); - udelay(1000000); - writel(pinz, &pio->piob.codr); - writel(pins, &pio->pioa.sodr); - } - } - return rcode; -} - -void poweroff(void) -{ - watchdog_reset(); - at91_set_pio_output(AT91_PIO_PORTA, 13, 1); /* CAN_TX -> H */ - udelay(100); - at91_set_pio_output(AT91_PIO_PORTA, 12, 0); /* CAN_STB -> L */ - udelay(100); - at91_set_pio_output(AT91_PIO_PORTA, 11, 0); /* CAN_EN -> L */ - udelay(100); - while (1) - watchdog_reset(); -} - -int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int rcode = 1; - poweroff(); - return rcode; -} - -int do_beep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int i; - u32 freq; - u32 durate; - int rcode = 1; - - freq = 1000; - durate = 2; - switch (argc) { - case 3: - durate = simple_strtoul(argv[2], NULL, 10); - case 2: - freq = simple_strtoul(argv[1], NULL, 10); - case 1: - break; - default: - cmd_usage(cmdtp); - rcode = 1; - break; - } - durate = durate * freq; - freq = 500000 / freq; - for (i = 0; i < durate; i++) { - at91_set_pio_output(AT91_PIO_PORTB, 29, 1); /* Sound On*/ - udelay(freq); - at91_set_pio_output(AT91_PIO_PORTB, 29, 0); /* Sound Off*/ - udelay(freq); - } - at91_set_pio_output(AT91_PIO_PORTB, 29, 0); /* Sound Off*/ - return rcode; -} - -int do_keytest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int rcode = 1; - int row; - u32 col; - u32 pinz; - u32 pins; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - writel((1 << ATMEL_ID_PIOA), &pmc->pcer); - - pins = 0x001F0000; - writel(pins, &pio->pioa.idr); - writel(pins, &pio->pioa.pudr); - writel(pins, &pio->pioa.per); - writel(pins, &pio->pioa.odr); - - pinz = 0x000F0000; - writel(pinz, &pio->piob.idr); - writel(pinz, &pio->piob.pudr); - writel(pinz, &pio->piob.per); - writel(pinz, &pio->piob.oer); - writel(pinz, &pio->piob.codr); - - while (1) { - col = 0; - for (row = 0; row < 4; row++) { - writel((0x00010000 << row), &pio->piob.sodr); - udelay(10000); - col <<= 4; - col |= ((readl(&pio->pioa.pdsr) >> 16) & 0xF) ^ 0xF ; - writel(pinz, &pio->piob.codr); - } - printf("Matix: "); - for (row = 0; row < 16; row++) { - printf("%1.1d", col & 1); - col >>= 1; - } - printf(" SP %d\r ", - 1 ^ (1 & (readl(&pio->piob.pdsr) >> 20))); - if ((1 & (readl(&pio->pioa.pdsr) >> 1)) == 0) { - /* SHUTDOWN */ - row = 0; - while (row < 1000) { - if ((1 & (readl(&pio->pioa.pdsr) >> 1)) == 0) - row++; - udelay(100); - } - udelay(100000); - row = 0; - while (row < 1000) { - if ((1 & (readl(&pio->pioa.pdsr) >> 1)) > 0) { - row++; - udelay(1000); - } - } - poweroff(); - while (1) - ; - } - } - return rcode; -} - -/*****************************************************************************/ - -U_BOOT_CMD( - ledtest, 1, 0, do_ledtest, - "test ledmatrix", - "\n" - ); - -U_BOOT_CMD( - keytest, 1, 0, do_keytest, - "test keymatix and special keys, poweroff on pressing ON key", - "\n" - ); - -U_BOOT_CMD( - poweroff, 1, 0, do_poweroff, - "power off", - "\n" - ); - -U_BOOT_CMD( - beep, 3, 0, do_beep, - "[freq [duration]]", - "freq frequence of beep\nduration duration of beep\n" - ); - -/*****************************************************************************/ diff --git a/board/LaCie/wireless_space/Kconfig b/board/LaCie/wireless_space/Kconfig deleted file mode 100644 index 75a2fc5a75..0000000000 --- a/board/LaCie/wireless_space/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_WIRELESS_SPACE - -config SYS_BOARD - default "wireless_space" - -config SYS_VENDOR - default "LaCie" - -config SYS_CONFIG_NAME - default "wireless_space" - -endif diff --git a/board/LaCie/wireless_space/MAINTAINERS b/board/LaCie/wireless_space/MAINTAINERS deleted file mode 100644 index c32ecb8b73..0000000000 --- a/board/LaCie/wireless_space/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -WIRELESS_SPACE BOARD -M: Albert ARIBAUD <albert.u.boot@aribaud.net> -S: Maintained -F: board/LaCie/wireless_space/ -F: include/configs/wireless_space.h -F: configs/wireless_space_defconfig diff --git a/board/LaCie/wireless_space/Makefile b/board/LaCie/wireless_space/Makefile deleted file mode 100644 index 90a84f4892..0000000000 --- a/board/LaCie/wireless_space/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := wireless_space.o ../common/common.o diff --git a/board/LaCie/wireless_space/kwbimage.cfg b/board/LaCie/wireless_space/kwbimage.cfg deleted file mode 100644 index 037248b3c6..0000000000 --- a/board/LaCie/wireless_space/kwbimage.cfg +++ /dev/null @@ -1,71 +0,0 @@ -# -# Copyright (C) 2012 Albert ARIBAUD <albert.u.boot@aribaud.net> -# -# Based on netspace_v2 kwbimage.cfg: -# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand # Boot from NAND flash -NAND_PAGE_SIZE 800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Values taken from image original LaCie U-Boot header dump! - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1B1B1B9B - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000c30 # DDR Configuration register - -DATA 0xFFD01404 0x37743000 # DDR Controller Control Low - -DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1) - -DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) - -DATA 0xFFD01410 0x0000CCCC # DDR Address Control - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control - -DATA 0xFFD01418 0x00000000 # DDR Operation - -DATA 0xFFD0141C 0x00000662 # DDR Mode - -DATA 0xFFD01420 0x00000004 # DDR Extended Mode - -DATA 0xFFD01424 0x0000F07F # DDR Controller Control High - -DATA 0xFFD01428 0x00096630 # DDR2 ODT Read Timing (default values) - -DATA 0xFFD0147C 0x00009663 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0 -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled -DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low) -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -DATA 0xFFD0149C 0x0000E40F # CPU ODT Control -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -DATA 0xFFD20134 0x66666666 -DATA 0xFFD20138 0x66666666 -DATA 0xFFD10000 0x01112222 -DATA 0xFFD1000C 0x00000000 -DATA 0xFFD10104 0x00000000 -DATA 0xFFD10100 0x40000000 -# End of Header extension -DATA 0x0 0x0 diff --git a/board/LaCie/wireless_space/wireless_space.c b/board/LaCie/wireless_space/wireless_space.c deleted file mode 100644 index 8620e4b5d1..0000000000 --- a/board/LaCie/wireless_space/wireless_space.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> - * - * Based on Kirkwood support: - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include <asm/arch/gpio.h> - -#include "../common/common.h" -#include "netdev.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* GPIO configuration: start FAN at low speed, USB and HDD */ - -#define WIRELESS_SPACE_OE_LOW 0xFF006808 -#define WIRELESS_SPACE_OE_HIGH 0x0000F989 -#define WIRELESS_SPACE_OE_VAL_LOW 0x00010080 -#define WIRELESS_SPACE_OE_VAL_HIGH 0x00000240 - -#define WIRELESS_SPACE_REAR_BUTTON 13 -#define WIRELESS_SPACE_FRONT_BUTTON 43 - -const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_GPIO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP15_SATA0_ACTn, - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GE1_0, /* Gigabit Ethernet 1 */ - MPP21_GE1_1, - MPP22_GE1_2, - MPP23_GE1_3, - MPP24_GE1_4, - MPP25_GE1_5, - MPP26_GE1_6, - MPP27_GE1_7, - MPP28_GE1_8, - MPP29_GE1_9, - MPP30_GE1_10, - MPP31_GE1_11, - MPP32_GE1_12, - MPP33_GE1_13, - MPP34_GE1_14, - MPP35_GE1_15, - MPP36_GPIO, /* Fan speed (bit 2) */ - MPP37_GPIO, /* Fan speed (bit 0) */ - MPP38_GPIO, /* Fan power */ - MPP39_GPIO, /* Fan rotation fail */ - MPP40_GPIO, /* Ethernet switch link */ - MPP41_GPIO, /* USB enable host vbus */ - MPP42_GPIO, /* LED clock control */ - MPP43_GPIO, /* WPS button (0=Pushed, 1=Released) */ - MPP44_GPIO, /* Red LED on/off */ - MPP45_GPIO, /* Red LED timer blink (on=off=100ms) */ - MPP46_GPIO, /* Green LED on/off */ - MPP47_GPIO, /* LED (blue, green) SATA activity blink */ - MPP48_GPIO, /* Blue LED on/off */ - 0 -}; - -struct mv88e61xx_config swcfg = { - .name = "egiga0", - .vlancfg = MV88E61XX_VLANCFG_ROUTER, - .rgmii_delay = MV88E61XX_RGMII_DELAY_EN, - .led_init = MV88E61XX_LED_INIT_EN, - .mdip = MV88E61XX_MDIP_NOCHANGE, - .portstate = MV88E61XX_PORTSTT_FORWARDING, - .cpuport = 0x20, - .ports_enabled = 0x3F, -}; - -int board_early_init_f(void) -{ - /* Gpio configuration */ - mvebu_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH, - WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - kirkwood_mpp_conf(kwmpp_config, NULL); - - return 0; -} - -int board_init(void) -{ - /* Machine number */ - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; - - /* Boot parameters address */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -#if defined(CONFIG_MISC_INIT_R) -int misc_init_r(void) -{ -#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) - if (!getenv("ethaddr")) { - uchar mac[6]; - if (lacie_read_mac_address(mac) == 0) - eth_setenv_enetaddr("ethaddr", mac); - } -#endif - return 0; -} -#endif - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) -/* Configure and initialize PHY */ -void reset_phy(void) -{ - /* configure switch on egiga0 */ - mv88e61xx_switch_initialize(&swcfg); -} -#endif - -#if defined(CONFIG_KIRKWOOD_GPIO) && defined(CONFIG_WIRELESS_SPACE_CMD) -/* Return GPIO button status */ -static int -do_ws(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if (strcmp(argv[1], "button") == 0) { - if (strcmp(argv[2], "rear") == 0) - /* invert GPIO result for intuitive while/until use */ - return !kw_gpio_get_value(WIRELESS_SPACE_REAR_BUTTON); - else if (strcmp(argv[2], "front") == 0) - return kw_gpio_get_value(WIRELESS_SPACE_FRONT_BUTTON); - else - return -1; - } else { - return -1; - } -} - -U_BOOT_CMD(ws, 3, 0, do_ws, - "Return GPIO button status 0=off 1=on", - "- ws button rear|front: test buttons' states\n" -); -#endif diff --git a/board/Marvell/mv88f6281gtw_ge/Kconfig b/board/Marvell/mv88f6281gtw_ge/Kconfig deleted file mode 100644 index 00d7d1c5ee..0000000000 --- a/board/Marvell/mv88f6281gtw_ge/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MV88F6281GTW_GE - -config SYS_BOARD - default "mv88f6281gtw_ge" - -config SYS_VENDOR - default "Marvell" - -config SYS_CONFIG_NAME - default "mv88f6281gtw_ge" - -endif diff --git a/board/Marvell/mv88f6281gtw_ge/MAINTAINERS b/board/Marvell/mv88f6281gtw_ge/MAINTAINERS deleted file mode 100644 index 9c26ca7658..0000000000 --- a/board/Marvell/mv88f6281gtw_ge/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MV88F6281GTW_GE BOARD -M: Prafulla Wadaskar <prafulla@marvell.com> -S: Maintained -F: board/Marvell/mv88f6281gtw_ge/ -F: include/configs/mv88f6281gtw_ge.h -F: configs/mv88f6281gtw_ge_defconfig diff --git a/board/Marvell/mv88f6281gtw_ge/Makefile b/board/Marvell/mv88f6281gtw_ge/Makefile deleted file mode 100644 index e83bbf76e2..0000000000 --- a/board/Marvell/mv88f6281gtw_ge/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := mv88f6281gtw_ge.o diff --git a/board/Marvell/mv88f6281gtw_ge/kwbimage.cfg b/board/Marvell/mv88f6281gtw_ge/kwbimage.cfg deleted file mode 100644 index 9fa87acde0..0000000000 --- a/board/Marvell/mv88f6281gtw_ge/kwbimage.cfg +++ /dev/null @@ -1,149 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM spi # Boot from SPI flash - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1b1b1b9b - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000a00 # DDR Configuration register -# bit13-0: 0xa00 (2560 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x38543000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x2202433D # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x0000002A # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x0000000D # DDR Address Control -# bit1-0: 01, Cs0width=x16 -# bit3-2: 11, Cs0size=1Gb -# bit5-4: 00, Cs2width=nonexistent -# bit7-6: 00, Cs1size =nonexistent -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000C52 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000046 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 1, DDR drive strenght reduced -# bit2: 1, DDR ODT control lsd enabled -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, enabled -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F1FF # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 1 , D2P Latency enabled -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x07, Size (i.e. 128MB) - -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00010001 # DDR ODT Control (Low) -# bit3-0: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000E811 # CPU ODT Control -# bit3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0 -# bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0 -# bit11-10:1, DQ_ODTSel. ODT select turned on - -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c deleted file mode 100644 index ef08ad8928..0000000000 --- a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Maintainer : Prafulla Wadaskar <prafulla@marvell.com> - * - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include "mv88f6281gtw_ge.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* - * default gpio configuration - * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status - */ - mvebu_config_gpio(MV88F6281GTW_GE_OE_VAL_LOW, - MV88F6281GTW_GE_OE_VAL_HIGH, - MV88F6281GTW_GE_OE_LOW, MV88F6281GTW_GE_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - static const u32 kwmpp_config[] = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_GPIO, - MPP5_GPO, - MPP6_SYSRST_OUTn, - MPP7_SPI_SCn, - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, - MPP13_GPIO, - MPP14_GPIO, - MPP15_GPIO, - MPP16_GPIO, - MPP17_GPIO, - MPP18_GPO, - MPP19_GPO, - MPP20_GPIO, - MPP21_GPIO, - MPP22_GPIO, - MPP23_GPIO, - MPP24_GPIO, - MPP25_GPIO, - MPP26_GPIO, - MPP27_GPIO, - MPP28_GPIO, - MPP29_GPIO, - MPP30_GPIO, - MPP31_GPIO, - MPP32_GPIO, - MPP33_GPIO, - MPP34_GPIO, - MPP35_GPIO, - MPP36_GPIO, - MPP37_GPIO, - MPP38_GPIO, - MPP39_GPIO, - MPP40_GPIO, - MPP41_GPIO, - MPP42_GPIO, - MPP43_GPIO, - MPP44_GPIO, - MPP45_GPIO, - MPP46_GPIO, - MPP47_GPIO, - MPP48_GPIO, - MPP49_GPIO, - 0 - }; - kirkwood_mpp_conf(kwmpp_config, NULL); - return 0; -} - -int board_init(void) -{ - /* - * arch number of board - */ - gd->bd->bi_arch_number = MACH_TYPE_MV88F6281GTW_GE; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -#ifdef CONFIG_MV88E61XX_SWITCH -void reset_phy(void) -{ - /* configure and initialize switch */ - struct mv88e61xx_config swcfg = { - .name = "egiga0", - .vlancfg = MV88E61XX_VLANCFG_ROUTER, - .rgmii_delay = MV88E61XX_RGMII_DELAY_EN, - .led_init = MV88E61XX_LED_INIT_EN, - .mdip = MV88E61XX_MDIP_REVERSE, - .portstate = MV88E61XX_PORTSTT_FORWARDING, - .cpuport = (1 << 5), - .ports_enabled = 0x3f - }; - - mv88e61xx_switch_initialize(&swcfg); -} -#endif /* CONFIG_MV88E61XX_SWITCH */ diff --git a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.h b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.h deleted file mode 100644 index 447e227c58..0000000000 --- a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __MV88F6281GTW_GE_H -#define __MV88F6281GTW_GE_H - -#define MV88F6281GTW_GE_OE_LOW (~((1 << 7) | (1 << 12) \ - |(1 << 20) | (1 << 21))) /*enable GLED,RLED */ -#define MV88F6281GTW_GE_OE_HIGH (~((1 << 4)|(1 << 6)|(1 << 7)|(1 << 12) \ - |(1 << 13)|(1 << 16)|(1 << 17))) -#define MV88F6281GTW_GE_OE_VAL_LOW (1 << 20) /*make GLED on */ -#define MV88F6281GTW_GE_OE_VAL_HIGH ((1 << 6)|(1 << 13)|(1 << 16)|(1 << 17)) - - -#endif /* __MV88F6281GTW_GE_H */ diff --git a/board/Marvell/openrd/Kconfig b/board/Marvell/openrd/Kconfig deleted file mode 100644 index 124b66da0f..0000000000 --- a/board/Marvell/openrd/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OPENRD - -config SYS_BOARD - default "openrd" - -config SYS_VENDOR - default "Marvell" - -config SYS_CONFIG_NAME - default "openrd" - -endif diff --git a/board/Marvell/openrd/MAINTAINERS b/board/Marvell/openrd/MAINTAINERS deleted file mode 100644 index 7a189ab6d5..0000000000 --- a/board/Marvell/openrd/MAINTAINERS +++ /dev/null @@ -1,12 +0,0 @@ -OPENRD BOARD -M: Prafulla Wadaskar <prafulla@marvell.com> -S: Maintained -F: board/Marvell/openrd/ -F: include/configs/openrd.h -F: configs/openrd_base_defconfig - -OPENRD_CLIENT BOARD -#M: - -S: Maintained -F: configs/openrd_client_defconfig -F: configs/openrd_ultimate_defconfig diff --git a/board/Marvell/openrd/Makefile b/board/Marvell/openrd/Makefile deleted file mode 100644 index 8f95b7922e..0000000000 --- a/board/Marvell/openrd/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# (C) Copyright 2009 -# Net Insight <www.netinsight.net> -# Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> -# -# Based on sheevaplug: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := openrd.o diff --git a/board/Marvell/openrd/kwbimage.cfg b/board/Marvell/openrd/kwbimage.cfg deleted file mode 100644 index 8e5993715e..0000000000 --- a/board/Marvell/openrd/kwbimage.cfg +++ /dev/null @@ -1,152 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1b1b1b9b - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x37543000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x000000cc # DDR Address Control -# bit1-0: 00, Cs0width=x8 -# bit3-2: 11, Cs0size=1Gb -# bit5-4: 00, Cs1width=x8 -# bit7-6: 11, Cs1size=1Gb -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000C52 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000042 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 1, DDR drive strength reduced -# bit2: 0, DDR ODT control lsd (disabled) -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, (disabled) -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 0 -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x0F, Size (i.e. 256MB) - -DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb -DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1 - -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low) -# bit3-0: 0010, (read) M_ODT[0] is asserted during read from DRAM CS1 -# bit7-4: 0001, (read) M_ODT[1] is asserted during read from DRAM CS0 -# bit19-16: 0010, (write) M_ODT[0] is asserted during write to DRAM CS1. -# bit23-20: 0001, (write) M_ODT[1] is asserted during write to DRAM CS0. -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) - -DATA 0xFFD0149C 0x0000E40f # CPU ODT Control -# bit3-0: 1111, internal ODT is asserted during read from DRAM bank 0-3 -# bit11-10: 01, M_DQ, M_DM, and M_DQS I/O buffer ODT Select: 150 ohm -# bit13-12: 10, M_STARTBURST_IN I/O buffer ODT Select: 75 ohm -# bit14: 1, M_STARTBURST_IN ODT: Enabled -# bit15: 1, DDR IO ODT Unit: Use ODT block -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/board/Marvell/openrd/openrd.c b/board/Marvell/openrd/openrd.c deleted file mode 100644 index 55cf525cf8..0000000000 --- a/board/Marvell/openrd/openrd.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * (C) Copyright 2009 - * Net Insight <www.netinsight.net> - * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> - * - * Based on sheevaplug.c: - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <miiphy.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include "openrd.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* - * default gpio configuration - * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status - */ - mvebu_config_gpio(OPENRD_OE_VAL_LOW, - OPENRD_OE_VAL_HIGH, - OPENRD_OE_LOW, OPENRD_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - static const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, - MPP13_SD_CMD, /* Alt UART1_TXD */ - MPP14_SD_D0, /* Alt UART1_RXD */ - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GE1_0, - MPP21_GE1_1, - MPP22_GE1_2, - MPP23_GE1_3, - MPP24_GE1_4, - MPP25_GE1_5, - MPP26_GE1_6, - MPP27_GE1_7, - MPP28_GPIO, - MPP29_TSMP9, - MPP30_GE1_10, - MPP31_GE1_11, - MPP32_GE1_12, - MPP33_GE1_13, - MPP34_GPIO, /* UART1 / SD sel */ - MPP35_TDM_CH0_TX_QL, - MPP36_TDM_SPI_CS1, - MPP37_TDM_CH2_TX_QL, - MPP38_TDM_CH2_RX_QL, - MPP39_AUDIO_I2SBCLK, - MPP40_AUDIO_I2SDO, - MPP41_AUDIO_I2SLRC, - MPP42_AUDIO_I2SMCLK, - MPP43_AUDIO_I2SDI, - MPP44_AUDIO_EXTCLK, - MPP45_TDM_PCLK, - MPP46_TDM_FS, - MPP47_TDM_DRX, - MPP48_TDM_DTX, - MPP49_TDM_CH0_RX_QL, - 0 - }; - - kirkwood_mpp_conf(kwmpp_config, NULL); - return 0; -} - -int board_init(void) -{ - /* - * arch number of board - */ -#if defined(CONFIG_BOARD_IS_OPENRD_BASE) - gd->bd->bi_arch_number = MACH_TYPE_OPENRD_BASE; -#elif defined(CONFIG_BOARD_IS_OPENRD_CLIENT) - gd->bd->bi_arch_number = MACH_TYPE_OPENRD_CLIENT; -#elif defined(CONFIG_BOARD_IS_OPENRD_ULTIMATE) - gd->bd->bi_arch_number = MACH_TYPE_OPENRD_ULTIMATE; -#endif - - /* adress of boot parameters */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -/* Configure and enable MV88E1116/88E1121 PHY */ -void mv_phy_init(char *name) -{ - u16 reg; - u16 devadr; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..%s could not read PHY dev address\n", - __FUNCTION__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - miiphy_reset(name, devadr); - - printf(PHY_NO" Initialized on %s\n", name); -} - -void reset_phy(void) -{ - mv_phy_init("egiga0"); - -#ifdef CONFIG_BOARD_IS_OPENRD_CLIENT - /* Kirkwood ethernet driver is written with the assumption that in case - * of multiple PHYs, their addresses are consecutive. But unfortunately - * in case of OpenRD-Client, PHY addresses are not consecutive.*/ - miiphy_write("egiga1", 0xEE, 0xEE, 24); -#endif - -#if defined(CONFIG_BOARD_IS_OPENRD_CLIENT) || \ - defined(CONFIG_BOARD_IS_OPENRD_ULTIMATE) - /* configure and initialize both PHY's */ - mv_phy_init("egiga1"); -#endif -} -#endif /* CONFIG_RESET_PHY_R */ diff --git a/board/Marvell/openrd/openrd.h b/board/Marvell/openrd/openrd.h deleted file mode 100644 index 56dfeea1a8..0000000000 --- a/board/Marvell/openrd/openrd.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * (C) Copyright 2009 - * Net Insight <www.netinsight.net> - * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> - * - * Based on sheevaplug.h: - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __OPENRD_BASE_H -#define __OPENRD_BASE_H - -#define OPENRD_OE_LOW (~(1<<28)) /* RS232 / RS485 */ -#define OPENRD_OE_HIGH (~(1<<2)) /* SD / UART1 */ -#define OPENRD_OE_VAL_LOW (0) /* Sel RS232 */ -#define OPENRD_OE_VAL_HIGH (1 << 2) /* Sel SD */ - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -#endif /* __OPENRD_BASE_H */ diff --git a/board/Marvell/rd6281a/Kconfig b/board/Marvell/rd6281a/Kconfig deleted file mode 100644 index 025ee26dc6..0000000000 --- a/board/Marvell/rd6281a/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_RD6281A - -config SYS_BOARD - default "rd6281a" - -config SYS_VENDOR - default "Marvell" - -config SYS_CONFIG_NAME - default "rd6281a" - -endif diff --git a/board/Marvell/rd6281a/MAINTAINERS b/board/Marvell/rd6281a/MAINTAINERS deleted file mode 100644 index d4ad592a9e..0000000000 --- a/board/Marvell/rd6281a/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -RD6281A BOARD -M: Prafulla Wadaskar <prafulla@marvell.com> -S: Maintained -F: board/Marvell/rd6281a/ -F: include/configs/rd6281a.h -F: configs/rd6281a_defconfig diff --git a/board/Marvell/rd6281a/Makefile b/board/Marvell/rd6281a/Makefile deleted file mode 100644 index cb773705e8..0000000000 --- a/board/Marvell/rd6281a/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := rd6281a.o diff --git a/board/Marvell/rd6281a/kwbimage.cfg b/board/Marvell/rd6281a/kwbimage.cfg deleted file mode 100644 index f969d92ed7..0000000000 --- a/board/Marvell/rd6281a/kwbimage.cfg +++ /dev/null @@ -1,151 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1b1b1b9b - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x37543000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x00000099 # DDR Address Control -# bit1-0: 00, Cs0width=x8 -# bit3-2: 11, Cs0size=1Gb -# bit5-4: 00, Cs1width=x8 -# bit7-6: 11, Cs1size=1Gb -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000C52 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000004 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 1, DDR ODT control lsd (disabled) -# bit5-3: 000, required -# bit6: 0, DDR ODT control msb, (disabled) -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 0 -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x0F, Size (i.e. 256MB) - -DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb -DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1 - -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low) -# bit3-0: 2, ODT0Rd, MODT[0] asserted during read from DRAM CS1 -# bit7-4: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 -# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000E40F # CPU ODT Control -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/board/Marvell/rd6281a/rd6281a.c b/board/Marvell/rd6281a/rd6281a.c deleted file mode 100644 index b0020c95a5..0000000000 --- a/board/Marvell/rd6281a/rd6281a.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <miiphy.h> -#include <netdev.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include "rd6281a.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* - * default gpio configuration - * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status - */ - mvebu_config_gpio(RD6281A_OE_VAL_LOW, - RD6281A_OE_VAL_HIGH, - RD6281A_OE_LOW, RD6281A_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - static const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, - MPP13_SD_CMD, - MPP14_SD_D0, - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GE1_0, - MPP21_GE1_1, - MPP22_GE1_2, - MPP23_GE1_3, - MPP24_GE1_4, - MPP25_GE1_5, - MPP26_GE1_6, - MPP27_GE1_7, - MPP28_GPIO, - MPP29_GPIO, - MPP30_GE1_10, - MPP31_GE1_11, - MPP32_GE1_12, - MPP33_GE1_13, - MPP34_GE1_14, - MPP35_GPIO, - MPP36_AUDIO_SPDIFI, - MPP37_AUDIO_SPDIFO, - MPP38_GPIO, - MPP39_TDM_SPI_CS0, - MPP40_TDM_SPI_SCK, - MPP41_TDM_SPI_MISO, - MPP42_TDM_SPI_MOSI, - MPP43_TDM_CODEC_INTn, - MPP44_GPIO, - MPP45_TDM_PCLK, - MPP46_TDM_FS, - MPP47_TDM_DRX, - MPP48_TDM_DTX, - MPP49_GPIO, - 0 - }; - kirkwood_mpp_conf(kwmpp_config, NULL); - return 0; -} - -int board_init(void) -{ - /* - * arch number of board - */ - gd->bd->bi_arch_number = MACH_TYPE_RD88F6281; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -void mv_phy_88e1116_init(char *name) -{ - u16 reg; - u16 devadr; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..%s could not read PHY dev address\n", - __FUNCTION__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - if (miiphy_read (name, devadr, MII_BMCR, ®) != 0) { - printf("Err..(%s) PHY status read failed\n", __FUNCTION__); - return; - } - if (miiphy_write (name, devadr, MII_BMCR, reg | 0x8000) != 0) { - printf("Err..(%s) PHY reset failed\n", __FUNCTION__); - return; - } - - printf("88E1116 Initialized on %s\n", name); -} - -/* Configure and enable Switch and PHY */ -void reset_phy(void) -{ - /* configure and initialize switch */ - struct mv88e61xx_config swcfg = { - .name = "egiga0", - .vlancfg = MV88E61XX_VLANCFG_ROUTER, - .rgmii_delay = MV88E61XX_RGMII_DELAY_EN, - .led_init = MV88E61XX_LED_INIT_EN, - .portstate = MV88E61XX_PORTSTT_FORWARDING, - .cpuport = (1 << 5), - .ports_enabled = 0x3f, - }; - - mv88e61xx_switch_initialize(&swcfg); - - /* configure and initialize PHY */ - mv_phy_88e1116_init("egiga1"); -} diff --git a/board/Marvell/rd6281a/rd6281a.h b/board/Marvell/rd6281a/rd6281a.h deleted file mode 100644 index 5e1f6a83fe..0000000000 --- a/board/Marvell/rd6281a/rd6281a.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __RD6281A_H -#define __RD6281A_H - -#define RD6281A_OE_LOW (~(1 << 7)) -#define RD6281A_OE_HIGH (~(1 << 2 | 1 << 12)) -#define RD6281A_OE_VAL_LOW (0) -#define RD6281A_OE_VAL_HIGH (1 << 12) - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -#endif /* __RD6281A_H */ diff --git a/board/altera/arria5-socdk/MAINTAINERS b/board/altera/arria5-socdk/MAINTAINERS index 30f2477681..ba35b3647f 100644 --- a/board/altera/arria5-socdk/MAINTAINERS +++ b/board/altera/arria5-socdk/MAINTAINERS @@ -1,7 +1,7 @@ SOCFPGA BOARD -M: Dinh Nguyen <dinguyen@altera.com> +M: Dinh Nguyen <dinguyen@opensource.altera.com> M: Chin-Liang See <clsee@altera.com> S: Maintained F: board/altera/arria5-socdk/ -F: include/configs/socfpga_arria5.h +F: include/configs/socfpga_arria5_socdk.h F: configs/socfpga_arria5_defconfig diff --git a/board/altera/cyclone5-socdk/MAINTAINERS b/board/altera/cyclone5-socdk/MAINTAINERS index f218ca411c..6374d592ac 100644 --- a/board/altera/cyclone5-socdk/MAINTAINERS +++ b/board/altera/cyclone5-socdk/MAINTAINERS @@ -1,9 +1,9 @@ SOCFPGA BOARD -M: Dinh Nguyen <dinguyen@altera.com> +M: Dinh Nguyen <dinguyen@opensource.altera.com> M: Chin-Liang See <clsee@altera.com> S: Maintained F: board/altera/cyclone5-socdk/ -F: include/configs/socfpga_cyclone5.h +F: include/configs/socfpga_cyclone5_socdk.h F: configs/socfpga_cyclone5_defconfig SOCRATES BOARD diff --git a/board/aristainetos/Kconfig b/board/aristainetos/Kconfig index e987f38e3a..e416c9ac0d 100644 --- a/board/aristainetos/Kconfig +++ b/board/aristainetos/Kconfig @@ -3,9 +3,6 @@ if TARGET_ARISTAINETOS config SYS_BOARD default "aristainetos" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "aristainetos" @@ -16,9 +13,6 @@ if TARGET_ARISTAINETOS2 config SYS_BOARD default "aristainetos" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "aristainetos2" @@ -29,9 +23,6 @@ if TARGET_ARISTAINETOS2B config SYS_BOARD default "aristainetos" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "aristainetos2b" diff --git a/board/aristainetos/MAINTAINERS b/board/aristainetos/MAINTAINERS index 78c9b693e1..b463f7b176 100644 --- a/board/aristainetos/MAINTAINERS +++ b/board/aristainetos/MAINTAINERS @@ -6,3 +6,4 @@ F: include/configs/aristainetos.h F: configs/aristainetos_defconfig F: include/configs/aristainetos2.h F: configs/aristainetos2_defconfig +F: configs/aristainetos2b_defconfig diff --git a/board/armltd/versatile/MAINTAINERS b/board/armltd/versatile/MAINTAINERS deleted file mode 100644 index a56dd99bb3..0000000000 --- a/board/armltd/versatile/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -VERSATILE BOARD -#M: - -S: Maintained -F: board/armltd/versatile/ -F: include/configs/versatile.h -F: configs/versatileab_defconfig -F: configs/versatilepb_defconfig -F: configs/versatileqemu_defconfig diff --git a/board/armltd/versatile/Makefile b/board/armltd/versatile/Makefile deleted file mode 100644 index a09a0ae550..0000000000 --- a/board/armltd/versatile/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := versatile.o -obj-y += lowlevel_init.o diff --git a/board/armltd/versatile/lowlevel_init.S b/board/armltd/versatile/lowlevel_init.S deleted file mode 100644 index 539ba41e66..0000000000 --- a/board/armltd/versatile/lowlevel_init.S +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2003, ARM Ltd. - * Philippe Robin, <philippe.robin@arm.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -/* Set up the platform, once the cpu has been initialized */ -.globl lowlevel_init -lowlevel_init: - - /* All done by Versatile's boot monitor! */ - mov pc, lr diff --git a/board/armltd/versatile/versatile.c b/board/armltd/versatile/versatile.c deleted file mode 100644 index 4e2d3421d8..0000000000 --- a/board/armltd/versatile/versatile.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * (C) Copyright 2004 - * ARM Ltd. - * Philippe Robin, <philippe.robin@arm.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_SHOW_BOOT_PROGRESS) -void show_boot_progress(int progress) -{ - printf("Boot reached stage %d\n", progress); -} -#endif - -#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF) - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_early_init_f (void) -{ - /* - * set clock frequency: - * VERSATILE_REFCLK is 32KHz - * VERSATILE_TIMCLK is 1MHz - */ - *(volatile unsigned int *)(VERSATILE_SCTL_BASE) |= - ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel)); - - return 0; -} - -int board_init (void) -{ - /* arch number of Versatile Board */ -#ifdef CONFIG_ARCH_VERSATILE_AB - gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_AB; -#else - gd->bd->bi_arch_number = MACH_TYPE_VERSATILE_PB; -#endif - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - gd->flags = 0; - - icache_enable (); - - return 0; -} - - -int misc_init_r (void) -{ - setenv("verify", "n"); - return (0); -} - -/****************************** - Routine: - Description: -******************************/ -int dram_init (void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/armltd/vexpress64/Kconfig b/board/armltd/vexpress64/Kconfig index f5693aebac..e05f353b80 100644 --- a/board/armltd/vexpress64/Kconfig +++ b/board/armltd/vexpress64/Kconfig @@ -1,17 +1,4 @@ -if TARGET_VEXPRESS64_BASE_FVP - -config SYS_BOARD - default "vexpress64" - -config SYS_VENDOR - default "armltd" - -config SYS_CONFIG_NAME - default "vexpress_aemv8a" - -endif - -if TARGET_VEXPRESS64_JUNO +if TARGET_VEXPRESS64_BASE_FVP || TARGET_VEXPRESS64_JUNO || TARGET_VEXPRESS64_BASE_FVP_DRAM config SYS_BOARD default "vexpress64" diff --git a/board/armltd/vexpress64/MAINTAINERS b/board/armltd/vexpress64/MAINTAINERS index 0ba044d7ff..15b0a08646 100644 --- a/board/armltd/vexpress64/MAINTAINERS +++ b/board/armltd/vexpress64/MAINTAINERS @@ -10,6 +10,11 @@ M: Linus Walleij <linus.walleij@linaro.org> S: Maintained F: configs/vexpress_aemv8a_semi_defconfig +VEXPRESS_AEMV8A_DRAM BOARD +M: Ryan Harkin <ryan.harkin@linaro.org> +S: Maintained +F: configs/vexpress_aemv8a_dram_defconfig + JUNO DEVELOPMENT PLATFORM BOARD M: Linus Walleij <linus.walleij@linaro.org> S: Maintained diff --git a/board/bachmann/ot1200/Kconfig b/board/bachmann/ot1200/Kconfig index 7f8a6a1abc..4ccb60a97f 100644 --- a/board/bachmann/ot1200/Kconfig +++ b/board/bachmann/ot1200/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "bachmann" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "ot1200" diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c index 2237b7aa1f..eeced7943e 100644 --- a/board/bachmann/ot1200/ot1200.c +++ b/board/bachmann/ot1200/ot1200.c @@ -305,13 +305,13 @@ int board_eth_init(bd_t *bis) bus = fec_get_miibus(base, -1); if (!bus) - return 0; + return -EINVAL; /* scan phy 0 and 5 */ phydev = phy_find_by_mask(bus, 0x21, PHY_INTERFACE_MODE_RGMII); if (!phydev) { - free(bus); - return 0; + ret = -EINVAL; + goto free_bus; } /* depending on the phy address we can detect our board version */ @@ -322,12 +322,16 @@ int board_eth_init(bd_t *bis) printf("using phy at %d\n", phydev->addr); ret = fec_probe(bis, -1, base, bus, phydev); - if (ret) { - printf("FEC MXC: %s:failed\n", __func__); - free(phydev); - free(bus); - } + if (ret) + goto free_phydev; + return 0; + +free_phydev: + free(phydev); +free_bus: + free(bus); + return ret; } int board_init(void) diff --git a/board/balloon3/Kconfig b/board/balloon3/Kconfig deleted file mode 100644 index 53b7a9a5c7..0000000000 --- a/board/balloon3/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_BALLOON3 - -config SYS_BOARD - default "balloon3" - -config SYS_CONFIG_NAME - default "balloon3" - -endif diff --git a/board/balloon3/MAINTAINERS b/board/balloon3/MAINTAINERS deleted file mode 100644 index df9a5bbcfa..0000000000 --- a/board/balloon3/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -BALLOON3 BOARD -M: Marek Vasut <marek.vasut@gmail.com> -S: Maintained -F: board/balloon3/ -F: include/configs/balloon3.h -F: configs/balloon3_defconfig diff --git a/board/balloon3/Makefile b/board/balloon3/Makefile deleted file mode 100644 index d7fb5e036e..0000000000 --- a/board/balloon3/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Balloon3 Support -# -# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := balloon3.o diff --git a/board/balloon3/balloon3.c b/board/balloon3/balloon3.c deleted file mode 100644 index 458d90c871..0000000000 --- a/board/balloon3/balloon3.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * Balloon3 Support - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/arch/pxa.h> -#include <serial.h> -#include <asm/io.h> -#include <spartan3.h> -#include <command.h> -#include <usb.h> - -DECLARE_GLOBAL_DATA_PTR; - -void balloon3_init_fpga(void); - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init(void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of balloon3 */ - gd->bd->bi_arch_number = MACH_TYPE_BALLOON3; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* Init the FPGA */ - balloon3_init_fpga(); - - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; -} - -#ifdef CONFIG_CMD_USB -int board_usb_init(int index, enum usb_init_type init) -{ - writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE), - UHCHR); - - writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR); - - while (readl(UHCHR) & UHCHR_FSBIR) - ; - - writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR); - writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE); - - /* Clear any OTG Pin Hold */ - if (readl(PSSR) & PSSR_OTGPH) - writel(readl(PSSR) | PSSR_OTGPH, PSSR); - - writel(readl(UHCRHDA) & ~(0x200), UHCRHDA); - writel(readl(UHCRHDA) | 0x100, UHCRHDA); - - /* Set port power control mask bits, only 3 ports. */ - writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB); - - /* enable port 2 */ - writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS | - UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR); - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} - -void usb_board_stop(void) -{ - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - udelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCCOMS) | 1, UHCCOMS); - udelay(10); - - writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN); - - return; -} -#endif - -#if defined(CONFIG_FPGA) -/* Toggle GPIO103 and GPIO104 -- PROGB and RDnWR */ -int fpga_pgm_fn(int nassert, int nflush, int cookie) -{ - if (nassert) - writel(0x80, GPCR3); - else - writel(0x80, GPSR3); - if (nflush) - writel(0x100, GPCR3); - else - writel(0x100, GPSR3); - return nassert; -} - -/* Check GPIO83 -- INITB */ -int fpga_init_fn(int cookie) -{ - return !(readl(GPLR2) & 0x80000); -} - -/* Check GPIO84 -- BUSY */ -int fpga_busy_fn(int cookie) -{ - return !(readl(GPLR2) & 0x100000); -} - -/* Check GPIO111 -- DONE */ -int fpga_done_fn(int cookie) -{ - return readl(GPLR3) & 0x8000; -} - -/* Configure GPIO104 as GPIO and deassert it */ -int fpga_pre_config_fn(int cookie) -{ - writel(readl(GAFR3_L) & ~0x30000, GAFR3_L); - writel(0x100, GPCR3); - return 0; -} - -/* Configure GPIO104 as nSKTSEL */ -int fpga_post_config_fn(int cookie) -{ - writel(readl(GAFR3_L) | 0x10000, GAFR3_L); - return 0; -} - -/* Toggle RDnWR */ -int fpga_wr_fn(int nassert_write, int flush, int cookie) -{ - udelay(1000); - - if (nassert_write) - writel(0x100, GPCR3); - else - writel(0x100, GPSR3); - - return nassert_write; -} - -/* Write program to the FPGA */ -int fpga_wdata_fn(uchar data, int flush, int cookie) -{ - writeb(data, 0x10f00000); - return 0; -} - -/* Toggle Clock pin -- NO-OP */ -int fpga_clk_fn(int assert_clk, int flush, int cookie) -{ - return assert_clk; -} - -/* Toggle ChipSelect pin -- NO-OP */ -int fpga_cs_fn(int assert_clk, int flush, int cookie) -{ - return assert_clk; -} - -xilinx_spartan3_slave_parallel_fns balloon3_fpga_fns = { - fpga_pre_config_fn, - fpga_pgm_fn, - fpga_init_fn, - NULL, /* err */ - fpga_done_fn, - fpga_clk_fn, - fpga_cs_fn, - fpga_wr_fn, - NULL, /* rdata */ - fpga_wdata_fn, - fpga_busy_fn, - NULL, /* abort */ - fpga_post_config_fn, -}; - -xilinx_desc fpga = XILINX_XC3S1000_DESC(slave_parallel, - (void *)&balloon3_fpga_fns, 0); - -/* Initialize the FPGA */ -void balloon3_init_fpga(void) -{ - fpga_init(); - fpga_add(fpga_xilinx, &fpga); -} -#else -void balloon3_init_fpga(void) {} -#endif /* CONFIG_FPGA */ diff --git a/board/barco/platinum/Kconfig b/board/barco/platinum/Kconfig index 8bbad24c0d..cc0648cd73 100644 --- a/board/barco/platinum/Kconfig +++ b/board/barco/platinum/Kconfig @@ -6,9 +6,6 @@ config SYS_CPU config SYS_VENDOR default "barco" -config SYS_SOC - default "mx6" - config SYS_BOARD default "platinum" @@ -25,9 +22,6 @@ config SYS_CPU config SYS_VENDOR default "barco" -config SYS_SOC - default "mx6" - config SYS_BOARD default "platinum" diff --git a/board/barco/titanium/Kconfig b/board/barco/titanium/Kconfig index b6f7c855b5..21bc36e004 100644 --- a/board/barco/titanium/Kconfig +++ b/board/barco/titanium/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "barco" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "titanium" diff --git a/board/boundary/nitrogen6x/Kconfig b/board/boundary/nitrogen6x/Kconfig index 03b0f6f278..f4db56d496 100644 --- a/board/boundary/nitrogen6x/Kconfig +++ b/board/boundary/nitrogen6x/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "boundary" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "nitrogen6x" diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index d46b8db232..104d71fa52 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -387,20 +387,17 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_FEC_MXC bus = fec_get_miibus(base, -1); if (!bus) - return 0; + return -EINVAL; /* scan phy 4,5,6,7 */ phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); if (!phydev) { - free(bus); - return 0; + ret = -EINVAL; + goto free_bus; } printf("using phy at %d\n", phydev->addr); ret = fec_probe(bis, -1, base, bus, phydev); - if (ret) { - printf("FEC MXC: %s:failed\n", __func__); - free(phydev); - free(bus); - } + if (ret) + goto free_phydev; #endif #ifdef CONFIG_CI_UDC @@ -408,6 +405,12 @@ int board_eth_init(bd_t *bis) usb_eth_initialize(bis); #endif return 0; + +free_phydev: + free(phydev); +free_bus: + free(bus); + return ret; } static void setup_buttons(void) diff --git a/board/comelit/dig297/Kconfig b/board/comelit/dig297/Kconfig deleted file mode 100644 index 6dccaff5b0..0000000000 --- a/board/comelit/dig297/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DIG297 - -config SYS_BOARD - default "dig297" - -config SYS_VENDOR - default "comelit" - -config SYS_CONFIG_NAME - default "dig297" - -endif diff --git a/board/comelit/dig297/MAINTAINERS b/board/comelit/dig297/MAINTAINERS deleted file mode 100644 index 318374e256..0000000000 --- a/board/comelit/dig297/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DIG297 BOARD -M: Luca Ceresoli <luca.ceresoli@comelit.it> -S: Maintained -F: board/comelit/dig297/ -F: include/configs/dig297.h -F: configs/dig297_defconfig diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c deleted file mode 100644 index 9d4c41b00b..0000000000 --- a/board/comelit/dig297/dig297.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * (C) Copyright 2011 Comelit Group SpA - * Luca Ceresoli <luca.ceresoli@comelit.it> - * - * Based on board/ti/beagle/beagle.c: - * (C) Copyright 2004-2008 - * Texas Instruments, <www.ti.com> - * - * Author : - * Sunil Kumar <sunilsaini05@gmail.com> - * Shashi Ranjan <shashiranjanmca05@gmail.com> - * - * Derived from Beagle Board and 3430 SDP code by - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <khasim@ti.com> - * - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <netdev.h> -#include <twl4030.h> -#include <asm/io.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/omap3-regs.h> -#include <asm/arch/mux.h> -#include <asm/arch/mem.h> -#include <asm/arch/sys_proto.h> -#include <asm/gpio.h> -#include <asm/mach-types.h> -#include "dig297.h" - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_CMD_NET -static void setup_net_chip(void); - -#define NET_LAN9221_RESET_GPIO 12 - -/* GPMC CS 5 connected to an SMSC LAN9220 ethernet controller */ -#define NET_LAN9220_GPMC_CONFIG1 (DEVICESIZE_16BIT) -#define NET_LAN9220_GPMC_CONFIG2 (CSWROFFTIME(8) | \ - CSRDOFFTIME(7) | \ - ADVONTIME(1)) -#define NET_LAN9220_GPMC_CONFIG3 (ADVWROFFTIME(2) | \ - ADVRDOFFTIME(2) | \ - ADVONTIME(1)) -#define NET_LAN9220_GPMC_CONFIG4 (WEOFFTIME(8) | \ - WEONTIME(1) | \ - OEOFFTIME(7)| \ - OEONTIME(1)) -#define NET_LAN9220_GPMC_CONFIG5 (PAGEBURSTACCESSTIME(0) | \ - RDACCESSTIME(6) | \ - WRCYCLETIME(0x1D) | \ - RDCYCLETIME(0x1D)) -#define NET_LAN9220_GPMC_CONFIG6 ((1 << 31) | \ - WRACCESSTIME(0x1D) | \ - WRDATAONADMUXBUS(3)) - -static const u32 gpmc_lan_config[] = { - NET_LAN9220_GPMC_CONFIG1, - NET_LAN9220_GPMC_CONFIG2, - NET_LAN9220_GPMC_CONFIG3, - NET_LAN9220_GPMC_CONFIG4, - NET_LAN9220_GPMC_CONFIG5, - NET_LAN9220_GPMC_CONFIG6, - /* CONFIG7: computed by enable_gpmc_cs_config() */ -}; -#endif /* CONFIG_CMD_NET */ - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -/* - * Routine: misc_init_r - * Description: Configure board specific parts - */ -int misc_init_r(void) -{ - struct gpio *gpio1_base = (struct gpio *)OMAP34XX_GPIO1_BASE; - struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; - - twl4030_power_init(); - twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); - - /* - * GPIO list - * - 159 OUT (GPIO5+31): reset for remote camera interface connector. - * - 19 OUT (GPIO1+19): integrated speaker amplifier (1=on, 0=shdn). - * - 20 OUT (GPIO1+20): handset amplifier (1=on, 0=shdn). - */ - - /* Configure GPIOs to output */ - writel(~(GPIO19 | GPIO20), &gpio1_base->oe); - writel(~(GPIO31), &gpio5_base->oe); - - /* Set GPIO values */ - writel((GPIO19 | GPIO20), &gpio1_base->setdataout); - writel(0, &gpio5_base->setdataout); - -#if defined(CONFIG_CMD_NET) - setup_net_chip(); -#endif - - dieid_num_r(); - - return 0; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - MUX_DIG297(); -} - -#ifdef CONFIG_GENERIC_MMC -int board_mmc_init(bd_t *bis) -{ - return omap_mmc_init(0, 0, 0, -1, -1); -} - -void board_mmc_power_init(void) -{ - twl4030_power_mmc_init(0); -} -#endif - -#ifdef CONFIG_CMD_NET -/* - * Routine: setup_net_chip - * Description: Setting up the configuration GPMC registers specific to the - * Ethernet hardware. - */ -static void setup_net_chip(void) -{ - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - - /* Configure GPMC registers */ - enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], - CONFIG_SMC911X_BASE, GPMC_SIZE_16M); - - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ - writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, - &ctrl_base->gpmc_nadv_ale); - - /* Make GPIO 12 as output pin and send a magic pulse through it */ - if (!gpio_request(NET_LAN9221_RESET_GPIO, "")) { - gpio_direction_output(NET_LAN9221_RESET_GPIO, 0); - gpio_set_value(NET_LAN9221_RESET_GPIO, 1); - udelay(1); - gpio_set_value(NET_LAN9221_RESET_GPIO, 0); - udelay(31000); /* Should be >= 30ms according to datasheet */ - gpio_set_value(NET_LAN9221_RESET_GPIO, 1); - } -} -#endif /* CONFIG_CMD_NET */ - -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); - return rc; -} diff --git a/board/comelit/dig297/dig297.h b/board/comelit/dig297/dig297.h deleted file mode 100644 index 8edfc099f3..0000000000 --- a/board/comelit/dig297/dig297.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - * (C) Copyright 2011 Comelit Group SpA - * Luca Ceresoli <luca.ceresoli@comelit.it> - * - * Based on board/ti/beagle/beagle.h: - * (C) Copyright 2008 - * Dirk Behme <dirk.behme@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef _DIG297_H_ -#define _DIG297_H_ - -const omap3_sysinfo sysinfo = { - DDR_STACKED, - "OMAP3 DIG297 board", - "NAND", -}; - -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_DIG297() \ -/*SDRC*/\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | DIS | M0)) /*sdrc_cke1: NC*/\ -/*GPMC*/\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\ - MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\ - MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\ - MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\ - MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\ - MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\ - MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\ - MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\ - MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\ - MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\ - MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\ - MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\ - MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\ - MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\ - MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\ - MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\ - MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\ - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*NAND*/\ - /* GPMC_nCS1/2: not available on CUS package*/\ - MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M0)) /*GPMC_nCS3*/\ - MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | DIS | M0)) /*GPMC_nCS4*/\ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ - MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/\ - MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*SYS_nDMA_REQ3*/\ - MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M0)) /*GPMC_nBE1: NC*/\ - /* GPMC_WAIT2: not available on CUS package*/\ - MUX_VAL(CP(GPMC_WAIT3), (IDIS | PTU | DIS | M0)) /*GPMC_WAIT3: NC*/\ - /* GPMC_CLK: NC (only asyncronous peripherals are connected) */\ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ - MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ - /* GPMC_WAIT1: not available on CUS package*/\ -/*DSS*/\ - MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ - MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ - MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ - /* DSS_ACBIAS: AC BIAS: connected to TFT, not to be driven */\ - MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTU | EN | M7))\ - MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ - MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ - MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ - MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ - MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ - MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ - MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ - MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ - MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ - MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ - MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ - MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ - MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ - MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ - MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ - MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ - MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ - MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ - MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ -/*CAMERA*/\ - MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ - MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ - MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ - MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ - MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ - MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ - MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ - MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ - MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ - MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ - MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ - MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ - MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ - MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ - MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ - MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ - MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ - MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ -/*Audio Interface */\ - MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ - MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ - MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ - MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ -/*Expansion card */\ - MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ - MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ - MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ - MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ -/*Wireless LAN */\ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ - MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ - MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ -/*Bluetooth*/\ - MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\ - MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ - MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\ - MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\ - MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144*/\ - MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\ - MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\ - MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\ -/*Modem Interface */\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ - MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \ - MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/ \ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ - MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*SSI1_DAT_RX*/\ - MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*SSI1_FLAG_RX*/\ - MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*SSI1_RDY_RX*/\ - MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\ - MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ -/*Serial Interface*/\ - MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ - MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ - MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ - MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ - MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ - MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ - MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ - MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ - MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ - MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ - MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ - MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ - MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ - MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\ - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ - MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ - MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ - MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ -/* USB EHCI (port 2) */\ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA0*/\ - MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA1*/\ -/* MCSPI1: to TOUCH controller TSC2046 (ADS7846 compatible).*/\ - /* - * McSPI1_CLK. - * IEN needed fot the McSPI to "receive" the clock and be able to - * sample SOMI. See http://e2e.ti.com/support/arm174_microprocessors/ - * omap_applications_processors/f/42/p/29444/102394.aspx#102394 - */\ - MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | EN | M0))\ - MUX_VAL(CP(MCSPI1_SIMO), (IDIS | PTD | EN | M0)) /*McSPI1_SIMO*/\ - MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | EN | M0)) /*McSPI1_SOMI*/\ - MUX_VAL(CP(MCSPI1_CS0), (IDIS | PTU | EN | M0)) /*McSPI1_CS0*/\ -/* MCSPI2: to HIMAX TFT controller.*/\ - MUX_VAL(CP(MCSPI2_CLK), (IDIS | PTD | EN | M0)) /*MCSPI2_CLK*/\ - MUX_VAL(CP(MCSPI2_SIMO), (IDIS | PTD | EN | M0)) /*MCSPI3_SIMO*/\ - /* MCSPI3_SOMI: NC because HIMAX in monodirectional (no SOMI line) */\ - MUX_VAL(CP(MCSPI2_SOMI), (IDIS | PTU | DIS | M7))\ - MUX_VAL(CP(MCSPI2_CS0), (IDIS | PTU | EN | M0)) /*MCSPI3_CS0*/\ - MUX_VAL(CP(MCSPI2_CS1), (IDIS | PTU | DIS | M7)) /*Safe mode: NC*/\ -/* GPIO */\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ - MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M4)) /*GPIO_12*/\ - MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M4)) /*GPIO_13*/\ - MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M4)) /*GPIO_14*/\ - MUX_VAL(CP(ETK_D1_ES2), (IDIS | PTD | EN | M4)) /*GPIO_15*/\ - MUX_VAL(CP(ETK_D2_ES2), (IDIS | PTD | EN | M4)) /*GPIO_16*/\ - MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M4)) /*GPIO_17*/\ - MUX_VAL(CP(ETK_D4_ES2), (IDIS | PTD | EN | M4)) /*GPIO_18*/\ - MUX_VAL(CP(ETK_D5_ES2), (IDIS | PTD | EN | M4)) /*GPIO_19*/\ - MUX_VAL(CP(ETK_D6_ES2), (IDIS | PTD | EN | M4)) /*GPIO_20*/\ - MUX_VAL(CP(ETK_D7_ES2), (IDIS | PTD | EN | M4)) /*GPIO_21*/\ - MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M4)) /*GPIO_23*/\ - MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | EN | M4)) /*GPIO_24*/\ - MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | EN | M4)) /*GPIO_25*/\ - MUX_VAL(CP(ETK_D12_ES2), (IDIS | PTD | EN | M4)) /*GPIO_26*/\ - MUX_VAL(CP(ETK_D13_ES2), (IDIS | PTD | EN | M4)) /*GPIO_27*/\ - MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M4)) /*GPIO_156*/\ - MUX_VAL(CP(MCBSP1_FSR), (IEN | PTU | EN | M4)) /*GPIO_157*/\ - MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ - MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ - MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M4)) /*GPIO_161*/\ - MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_162*/\ - MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | EN | M4)) /*GPIO_164*/\ - MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | DIS | M4)) /*GPIO_170*/\ - MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | EN | M4)) /*GPIO_177*/\ -/*Control and debug */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ - MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ - MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ - MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/ \ - MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\ - MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ - MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\ - MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ - MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ - MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ - MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ - MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ - MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ - MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ - MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ - MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ - MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ - MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ - MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ - MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ - MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ - MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ - MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ - MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ - MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ - MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ - MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ - MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ - MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ - MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ - MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ - MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ - MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ - MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ - MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ - MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ - MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ - MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ - MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ - MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ - MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ - MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ - MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ - MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\ - MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ - MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\ - MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\ - MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ - MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ - MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ - MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\ - MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\ - MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\ - MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\ - MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\ - MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ - MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ - MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ - MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ - MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\ - MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ - MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\ - MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\ - MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\ - MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ - MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ - MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ - MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ - MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ - MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag */ - -#endif diff --git a/board/compulab/cm_fx6/Kconfig b/board/compulab/cm_fx6/Kconfig index 508c21f58b..59070c5f75 100644 --- a/board/compulab/cm_fx6/Kconfig +++ b/board/compulab/cm_fx6/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "compulab" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "cm_fx6" diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index e3db9d5b9b..01871e100a 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -561,9 +561,14 @@ int cm_fx6_setup_ecspi(void) { return 0; } #endif #ifdef CONFIG_OF_BOARD_SETUP +#define USDHC3_PATH "/soc/aips-bus@02100000/usdhc@02198000/" int ft_board_setup(void *blob, bd_t *bd) { + u32 baseboard_rev; + int nodeoffset; uint8_t enetaddr[6]; + char baseboard_name[16]; + int err; /* MAC addr */ if (eth_getenv_enetaddr("ethaddr", enetaddr)) { @@ -577,6 +582,21 @@ int ft_board_setup(void *blob, bd_t *bd) enetaddr, 6, 1); } + baseboard_rev = cl_eeprom_get_board_rev(0); + err = cl_eeprom_get_product_name((uchar *)baseboard_name, 0); + if (err || baseboard_rev == 0) + return 0; /* Assume not an early revision SB-FX6m baseboard */ + + if (!strncmp("SB-FX6m", baseboard_name, 7) && baseboard_rev <= 120) { + fdt_shrink_to_minimum(blob); /* Make room for new properties */ + nodeoffset = fdt_path_offset(blob, USDHC3_PATH); + fdt_delprop(blob, nodeoffset, "cd-gpios"); + fdt_find_and_setprop(blob, USDHC3_PATH, "non-removable", + NULL, 0, 1); + fdt_find_and_setprop(blob, USDHC3_PATH, "keep-power-in-suspend", + NULL, 0, 1); + } + return 0; } #endif @@ -689,7 +709,7 @@ int dram_init(void) u32 get_board_rev(void) { - return cl_eeprom_get_board_rev(); + return cl_eeprom_get_board_rev(CONFIG_SYS_I2C_EEPROM_BUS); } static struct mxc_serial_platdata cm_fx6_mxc_serial_plat = { diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c index 374edbcffc..8f17b97fa3 100644 --- a/board/compulab/cm_t35/cm_t35.c +++ b/board/compulab/cm_t35/cm_t35.c @@ -104,7 +104,7 @@ int board_init(void) */ u32 get_board_rev(void) { - return cl_eeprom_get_board_rev(); + return cl_eeprom_get_board_rev(CONFIG_SYS_I2C_EEPROM_BUS); }; int misc_init_r(void) diff --git a/board/compulab/cm_t3517/mux.c b/board/compulab/cm_t3517/mux.c index 88ce2cc2e6..f31f19e7b8 100644 --- a/board/compulab/cm_t3517/mux.c +++ b/board/compulab/cm_t3517/mux.c @@ -121,12 +121,12 @@ void set_muxconf_regs(void) MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)); /*GPIO_147*/ /* MMC1 */ - MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)); - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)); - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); + MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)); + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)); + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)); + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)); + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)); + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)); /* DSS */ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)); diff --git a/board/compulab/common/eeprom.c b/board/compulab/common/eeprom.c index 77bcea44b4..630446820c 100644 --- a/board/compulab/common/eeprom.c +++ b/board/compulab/common/eeprom.c @@ -9,6 +9,7 @@ #include <common.h> #include <i2c.h> +#include "eeprom.h" #ifndef CONFIG_SYS_I2C_EEPROM_ADDR # define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 @@ -25,6 +26,8 @@ #define BOARD_REV_OFFSET 0 #define BOARD_REV_OFFSET_LEGACY 6 #define BOARD_REV_SIZE 2 +#define PRODUCT_NAME_OFFSET 128 +#define PRODUCT_NAME_SIZE 16 #define MAC_ADDR_OFFSET 4 #define MAC_ADDR_OFFSET_LEGACY 0 @@ -105,9 +108,11 @@ void get_board_serial(struct tag_serialnr *serialnr) int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus) { uint offset; + int err; - if (cl_eeprom_setup(eeprom_bus)) - return 0; + err = cl_eeprom_setup(eeprom_bus); + if (err) + return err; offset = (cl_eeprom_layout != LAYOUT_LEGACY) ? MAC_ADDR_OFFSET : MAC_ADDR_OFFSET_LEGACY; @@ -121,7 +126,7 @@ static u32 board_rev; * Routine: cl_eeprom_get_board_rev * Description: read system revision from eeprom */ -u32 cl_eeprom_get_board_rev(void) +u32 cl_eeprom_get_board_rev(uint eeprom_bus) { char str[5]; /* Legacy representation can contain at most 4 digits */ uint offset = BOARD_REV_OFFSET_LEGACY; @@ -129,7 +134,7 @@ u32 cl_eeprom_get_board_rev(void) if (board_rev) return board_rev; - if (cl_eeprom_setup(CONFIG_SYS_I2C_EEPROM_BUS)) + if (cl_eeprom_setup(eeprom_bus)) return 0; if (cl_eeprom_layout != LAYOUT_LEGACY) @@ -149,3 +154,30 @@ u32 cl_eeprom_get_board_rev(void) return board_rev; }; + +/* + * Routine: cl_eeprom_get_board_rev + * Description: read system revision from eeprom + * + * @buf: buffer to store the product name + * @eeprom_bus: i2c bus num of the eeprom + * + * @return: 0 on success, < 0 on failure + */ +int cl_eeprom_get_product_name(uchar *buf, uint eeprom_bus) +{ + int err; + + if (buf == NULL) + return -EINVAL; + + err = cl_eeprom_setup(eeprom_bus); + if (err) + return err; + + err = cl_eeprom_read(PRODUCT_NAME_OFFSET, buf, PRODUCT_NAME_SIZE); + if (!err) /* Protect ourselves from invalid data (unterminated str) */ + buf[PRODUCT_NAME_SIZE - 1] = '\0'; + + return err; +} diff --git a/board/compulab/common/eeprom.h b/board/compulab/common/eeprom.h index 50c6b0226f..c0b4739ea2 100644 --- a/board/compulab/common/eeprom.h +++ b/board/compulab/common/eeprom.h @@ -9,19 +9,25 @@ #ifndef _EEPROM_ #define _EEPROM_ +#include <errno.h> #ifdef CONFIG_SYS_I2C int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus); -u32 cl_eeprom_get_board_rev(void); +u32 cl_eeprom_get_board_rev(uint eeprom_bus); +int cl_eeprom_get_product_name(uchar *buf, uint eeprom_bus); #else static inline int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus) { return 1; } -static inline u32 cl_eeprom_get_board_rev(void) +static inline u32 cl_eeprom_get_board_rev(uint eeprom_bus) { return 0; } +static inline int cl_eeprom_get_product_name(uchar *buf, uint eeprom_bus) +{ + return -ENOSYS; +} #endif #endif diff --git a/board/congatec/cgtqmx6eval/Kconfig b/board/congatec/cgtqmx6eval/Kconfig index 0a837bde0e..773551baa9 100644 --- a/board/congatec/cgtqmx6eval/Kconfig +++ b/board/congatec/cgtqmx6eval/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "congatec" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "cgtqmx6eval" diff --git a/board/congatec/cgtqmx6eval/MAINTAINERS b/board/congatec/cgtqmx6eval/MAINTAINERS index 35f4a2a21a..c41ebf5f9e 100644 --- a/board/congatec/cgtqmx6eval/MAINTAINERS +++ b/board/congatec/cgtqmx6eval/MAINTAINERS @@ -1,6 +1,6 @@ CGTQMX6EVAL BOARD -#M: Leo Sartre <lsartre@adeneo-embedded.com> -S: Orphan (since 2014-06) +M: Otavio Salvador <otavio@ossystems.com.br> +S: Maintained F: board/congatec/cgtqmx6eval/ F: include/configs/cgtqmx6eval.h F: configs/cgtqmx6qeval_defconfig diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c index 574891e5ec..cf5607b2c8 100644 --- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c +++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c @@ -212,8 +212,7 @@ int power_init_board(void) for (i = 0; i < ARRAY_SIZE(mipi_levels); i++) { if (!strcmp(mipi_levels[i].name, lv_mipi)) { - printf("set MIPI level %s\n", - mipi_levels[i].name); + printf("set MIPI level %s\n", mipi_levels[i].name); ret = pmic_reg_write(p, PFUZE100_VGEN4VOL, mipi_levels[i].value); if (ret) diff --git a/board/davedenx/qong/Kconfig b/board/davedenx/qong/Kconfig deleted file mode 100644 index 76cf343ded..0000000000 --- a/board/davedenx/qong/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_QONG - -config SYS_BOARD - default "qong" - -config SYS_VENDOR - default "davedenx" - -config SYS_SOC - default "mx31" - -config SYS_CONFIG_NAME - default "qong" - -endif diff --git a/board/davedenx/qong/MAINTAINERS b/board/davedenx/qong/MAINTAINERS deleted file mode 100644 index a275b5bce4..0000000000 --- a/board/davedenx/qong/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -QONG BOARD -M: Wolfgang Denk <wd@denx.de> -S: Maintained -F: board/davedenx/qong/ -F: include/configs/qong.h -F: configs/qong_defconfig diff --git a/board/davedenx/qong/Makefile b/board/davedenx/qong/Makefile deleted file mode 100644 index 48c443d760..0000000000 --- a/board/davedenx/qong/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2009 -# Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com> -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := qong.o fpga.o -obj-y += lowlevel_init.o diff --git a/board/davedenx/qong/fpga.c b/board/davedenx/qong/fpga.c deleted file mode 100644 index 2eaad1e976..0000000000 --- a/board/davedenx/qong/fpga.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * (C) Copyright 2010 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/gpio.h> -#include <fpga.h> -#include <lattice.h> -#include "qong_fpga.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_FPGA) - -static void qong_jtag_init(void) -{ - return; -} - -static void qong_fpga_jtag_set_tdi(int value) -{ - gpio_set_value(QONG_FPGA_TDI_PIN, value); -} - -static void qong_fpga_jtag_set_tms(int value) -{ - gpio_set_value(QONG_FPGA_TMS_PIN, value); -} - -static void qong_fpga_jtag_set_tck(int value) -{ - gpio_set_value(QONG_FPGA_TCK_PIN, value); -} - -static int qong_fpga_jtag_get_tdo(void) -{ - return gpio_get_value(QONG_FPGA_TDO_PIN); -} - -lattice_board_specific_func qong_fpga_fns = { - qong_jtag_init, - qong_fpga_jtag_set_tdi, - qong_fpga_jtag_set_tms, - qong_fpga_jtag_set_tck, - qong_fpga_jtag_get_tdo -}; - -Lattice_desc qong_fpga[CONFIG_FPGA_COUNT] = { - { - Lattice_XP2, - lattice_jtag_mode, - 356519, - (void *) &qong_fpga_fns, - NULL, - 0, - "lfxp2_5e_ftbga256" - }, -}; - -int qong_fpga_init(void) -{ - int i; - - fpga_init(); - - for (i = 0; i < CONFIG_FPGA_COUNT; i++) { - fpga_add(fpga_lattice, &qong_fpga[i]); - } - return 0; -} - -#endif diff --git a/board/davedenx/qong/lowlevel_init.S b/board/davedenx/qong/lowlevel_init.S deleted file mode 100644 index 8887023f8c..0000000000 --- a/board/davedenx/qong/lowlevel_init.S +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Copyright (C) 2009, Emcraft Systems, Ilya Yanok <yanok@emcraft.com> - * - * Based on board/freescale/mx31ads/lowlevel_init.S - * by Guennadi Liakhovetski. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/imx-regs.h> - -.macro REG reg, val - ldr r2, =\reg - ldr r3, =\val - str r3, [r2] -.endm - -.macro REG8 reg, val - ldr r2, =\reg - ldr r3, =\val - strb r3, [r2] -.endm - -.macro DELAY loops - ldr r2, =\loops -1: - subs r2, r2, #1 - nop - bcs 1b -.endm - -.macro SETUP_RAM cfg, ctl - /* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */ - REG 0xB8001010, 0x00000004 - ldr r3, =\cfg - ldr r2, =WEIM_ESDCFG0 - str r3, [r2] - REG 0xB8001000, 0x92100000 - REG 0x80000f00, 0x12344321 - REG 0xB8001000, 0xa2100000 - REG 0x80000000, 0x12344321 - REG 0x80000000, 0x12344321 - REG 0xB8001000, 0xb2100000 - REG8 0x80000033, 0xda - REG8 0x81000000, 0xff - ldr r3, =\ctl - ldr r2, =WEIM_ESDCTL0 - str r3, [r2] - REG 0x80000000, 0xDEADBEEF - REG 0xB8001010, 0x0000000c - -.endm -/* RedBoot: To support 133MHz DDR */ -.macro init_drive_strength - /* - * Disable maximum drive strength SDRAM/DDR lines by clearing DSE1 bits - * in SW_PAD_CTL registers - */ - - /* SDCLK */ - ldr r1, =IOMUXC_SW_PAD_CTL(0x2b) - ldr r0, [r1, #0x6C] - bic r0, r0, #(1 << 12) - str r0, [r1, #0x6C] - - /* CAS */ - ldr r0, [r1, #0x70] - bic r0, r0, #(1 << 22) - str r0, [r1, #0x70] - - /* RAS */ - ldr r0, [r1, #0x74] - bic r0, r0, #(1 << 2) - str r0, [r1, #0x74] - - /* CS2 (CSD0) */ - ldr r0, [r1, #0x7C] - bic r0, r0, #(1 << 22) - str r0, [r1, #0x7C] - - /* DQM3 */ - ldr r0, [r1, #0x84] - bic r0, r0, #(1 << 22) - str r0, [r1, #0x84] - - /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */ - ldr r2, =22 /* (0x2E0 - 0x288) / 4 = 22 */ -pad_loop: - ldr r0, [r1, #0x88] - bic r0, r0, #(1 << 22) - bic r0, r0, #(1 << 12) - bic r0, r0, #(1 << 2) - str r0, [r1, #0x88] - add r1, r1, #4 - subs r2, r2, #0x1 - bne pad_loop -.endm /* init_drive_strength */ - -.globl lowlevel_init -lowlevel_init: - - init_drive_strength - - /* Image Processing Unit: */ - /* Too early to switch display on? */ - /* Switch on Display Interface */ - REG IPU_CONF, IPU_CONF_DI_EN - /* Clock Control Module: */ - REG CCM_CCMR, 0x074B0BF5 /* Use CKIH, MCU PLL off */ - - DELAY 0x40000 - - REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE /* MCU PLL on */ - /* Switch to MCU PLL */ - REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS - - /* 399-133-66.5 */ - ldr r0, =CCM_BASE - ldr r1, =0xFF871650 - /* PDR0 */ - str r1, [r0, #0x4] - ldr r1, MPCTL_PARAM_399 - /* MPCTL */ - str r1, [r0, #0x10] - - /* Set UPLL=240MHz, USB=60MHz */ - ldr r1, =0x49FCFE7F - /* PDR1 */ - str r1, [r0, #0x8] - ldr r1, UPCTL_PARAM_240 - /* UPCTL */ - str r1, [r0, #0x14] - /* default CLKO to 1/8 of the ARM core */ - mov r1, #0x00000208 - /* COSR */ - str r1, [r0, #0x1c] - - /* Default: 1, 4, 12, 1 */ - REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1) - -check_ddr_module: -/* Set stackpointer in internal RAM to call get_ram_size */ - ldr sp, =(IRAM_BASE_ADDR + IRAM_SIZE - 16) - stmfd sp!, {r0-r11, ip, lr} - mov ip, lr /* save link reg across call */ - - ldr r0,=0x08000000 - SETUP_RAM ESDCFG0_256MB, ESDCTL0_256MB - ldr r0,=0x80000000 - ldr r1,=0x10000000 - bl get_ram_size - ldr r1,=0x10000000 - cmp r0,r1 - beq restore_regs - SETUP_RAM ESDCFG0_128MB, ESDCTL0_128MB - ldr r0,=0x80000000 - ldr r1,=0x08000000 - bl get_ram_size - ldr r1,=0x08000000 - cmp r0,r1 - beq restore_regs - -restore_regs: - ldmfd sp!, {r0-r11, ip, lr} - mov lr, ip /* restore link reg */ - - mov pc, lr - - -MPCTL_PARAM_399: - .word (((1 - 1) << 26) + ((52 - 1) << 16) + (7 << 10) + (35 << 0)) -UPCTL_PARAM_240: - .word (((2 - 1) << 26) + ((13 - 1) << 16) + (9 << 10) + (3 << 0)) - - .equ ESDCFG0_128MB, \ - (0 << 21) + /* tXP */ \ - (1 << 20) + /* tWTR */ \ - (2 << 18) + /* tRP */ \ - (1 << 16) + /* tMRD */ \ - (0 << 15) + /* tWR */ \ - (5 << 12) + /* tRAS */ \ - (1 << 10) + /* tRRD */ \ - (3 << 8) + /* tCAS */ \ - (2 << 4) + /* tRCD */ \ - (0x0F << 0) /* tRC */ - - .equ ESDCTL0_128MB, \ - (1 << 31) + /* enable */ \ - (0 << 28) + /* mode */ \ - (0 << 27) + /* supervisor protect */ \ - (2 << 24) + /* 13 rows */ \ - (2 << 20) + /* 10 cols */ \ - (2 << 16) + /* 32 bit */ \ - (3 << 13) + /* 7.81us (64ms/8192) */ \ - (0 << 10) + /* power down timer */ \ - (0 << 8) + /* full page */ \ - (1 << 7) + /* burst length */ \ - (0 << 0) /* precharge timer */ - - .equ ESDCFG0_256MB, \ - (3 << 21) + /* tXP */ \ - (0 << 20) + /* tWTR */ \ - (2 << 18) + /* tRP */ \ - (1 << 16) + /* tMRD */ \ - (0 << 15) + /* tWR */ \ - (5 << 12) + /* tRAS */ \ - (1 << 10) + /* tRRD */ \ - (3 << 8) + /* tCAS */ \ - (2 << 4) + /* tRCD */ \ - (7 << 0) /* tRC */ - - .equ ESDCTL0_256MB, \ - (1 << 31) + \ - (0 << 28) + \ - (0 << 27) + \ - (3 << 24) + /* 14 rows */ \ - (2 << 20) + /* 10 cols */ \ - (2 << 16) + \ - (4 << 13) + /* 3.91us (64ms/16384) */ \ - (0 << 10) + \ - (0 << 8) + \ - (1 << 7) + \ - (0 << 0) diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c deleted file mode 100644 index ad1694b79f..0000000000 --- a/board/davedenx/qong/qong.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * - * (c) 2009 Emcraft Systems, Ilya Yanok <yanok@emcraft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/sys_proto.h> -#include <asm/io.h> -#include <nand.h> -#include <power/pmic.h> -#include <fsl_pmic.h> -#include <asm/gpio.h> -#include "qong_fpga.h" -#include <watchdog.h> -#include <errno.h> - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -static void qong_fpga_reset(void) -{ - gpio_set_value(QONG_FPGA_RST_PIN, 0); - udelay(30); - gpio_set_value(QONG_FPGA_RST_PIN, 1); - - udelay(300); -} - -int board_early_init_f(void) -{ -#ifdef CONFIG_QONG_FPGA - /* CS1: FPGA/Network Controller/GPIO, 16-bit, no DTACK */ - static const struct mxc_weimcs cs1 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 0, 0, 1), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(2, 0, 0, 4, 0, 0, 5, 0, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(0, 4, 0, 2, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0) - }; - - mxc_setup_weimcs(1, &cs1); - - /* setup pins for FPGA */ - mx31_gpio_mux(IOMUX_MODE(0x76, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(0x7e, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(0x91, MUX_CTL_OUT_FUNC | MUX_CTL_IN_GPIO)); - mx31_gpio_mux(IOMUX_MODE(0x92, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(0x93, MUX_CTL_GPIO)); - - /* FPGA reset Pin */ - /* rstn = 0 */ - gpio_direction_output(QONG_FPGA_RST_PIN, 0); - - /* set interrupt pin as input */ - gpio_direction_input(QONG_FPGA_IRQ_PIN); - - /* FPGA JTAG Interface */ - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SFS6, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SCK6, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CAPTURE, MUX_CTL_GPIO)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_COMPARE, MUX_CTL_GPIO)); - gpio_direction_output(QONG_FPGA_TCK_PIN, 0); - gpio_direction_output(QONG_FPGA_TMS_PIN, 0); - gpio_direction_output(QONG_FPGA_TDI_PIN, 0); - gpio_direction_input(QONG_FPGA_TDO_PIN); -#endif - - /* setup pins for UART1 */ - mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); - mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); - mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); - mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); - - /* setup pins for SPI (pmic) */ - mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B); - mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI); - mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO); - mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK); - mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B); - - /* Setup pins for USB2 Host */ - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_CLK, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_DIR, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_NXT, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_STP, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_DATA0, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_DATA1, MUX_CTL_FUNC)); - -#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ - PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) - - mx31_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG); - mx31_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG); - mx31_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG); - mx31_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG); - mx31_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */ - mx31_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */ - mx31_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */ - mx31_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */ - mx31_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */ - mx31_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */ - mx31_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */ - mx31_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */ - - mx31_set_gpr(MUX_PGP_UH2, 1); - - return 0; - -} - -int board_init(void) -{ - /* Chip selects */ - /* CS0: Nor Flash #0 - it must be init'ed when executing from DDR */ - /* Assumptions: HCLK = 133 MHz, tACC = 130ns */ - static const struct mxc_weimcs cs0 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 21, 0, 0, 6), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(0, 1, 3, 3, 1, 1, 5, 1, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(0, 1, 2, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0) - }; - - mxc_setup_weimcs(0, &cs0); - - /* board id for linux */ - gd->bd->bi_arch_number = MACH_TYPE_QONG; - gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */ - - qong_fpga_init(); - - return 0; -} - -int board_late_init(void) -{ - u32 val; - struct pmic *p; - int ret; - - ret = pmic_init(I2C_PMIC); - if (ret) - return ret; - - p = pmic_get("FSL_PMIC"); - if (!p) - return -ENODEV; - /* Enable RTC battery */ - pmic_reg_read(p, REG_POWER_CTL0, &val); - pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN); - pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI); - -#ifdef CONFIG_HW_WATCHDOG - hw_watchdog_init(); -#endif - - return 0; -} - -int checkboard(void) -{ - printf("Board: DAVE/DENX Qong\n"); - return 0; -} - -int misc_init_r(void) -{ -#ifdef CONFIG_QONG_FPGA - u32 tmp; - - tmp = *(volatile u32*)QONG_FPGA_CTRL_VERSION; - printf("FPGA: "); - printf("version register = %u.%u.%u\n", - (tmp & 0xF000) >> 12, (tmp & 0x0F00) >> 8, tmp & 0x00FF); -#endif - return 0; -} - -int board_eth_init(bd_t *bis) -{ -#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_DNET) - return dnet_eth_initialize(0, (void *)CONFIG_DNET_BASE, -1); -#else - return 0; -#endif -} - -#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_NAND_PLAT) -static void board_nand_setup(void) -{ - /* CS3: NAND 8-bit */ - static const struct mxc_weimcs cs3 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 1, 15, 0, 0, 0), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(2, 0, 0, 1, 3, 1, 3, 3, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(0, 0, 0, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0) - }; - - mxc_setup_weimcs(3, &cs3); - - mx31_set_gpr(MUX_SDCTL_CSD1_SEL, 1); - - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_WP, MUX_CTL_IN_GPIO)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_CE, MUX_CTL_IN_GPIO)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_RB, MUX_CTL_IN_GPIO)); - - /* Make sure to reset the fpga else you cannot access NAND */ - qong_fpga_reset(); - - /* Enable NAND flash */ - gpio_set_value(15, 1); - gpio_set_value(14, 1); - gpio_direction_output(15, 0); - gpio_direction_input(16); - gpio_direction_input(14); - -} - -int qong_nand_rdy(void *chip) -{ - udelay(1); - return gpio_get_value(16); -} - -void qong_nand_select_chip(struct mtd_info *mtd, int chip) -{ - if (chip >= 0) - gpio_set_value(15, 0); - else - gpio_set_value(15, 1); - -} - -void qong_nand_plat_init(void *chip) -{ - struct nand_chip *nand = (struct nand_chip *)chip; - nand->chip_delay = 20; - nand->select_chip = qong_nand_select_chip; - nand->options &= ~NAND_BUSWIDTH_16; - board_nand_setup(); -} - -#endif diff --git a/board/davedenx/qong/qong_fpga.h b/board/davedenx/qong/qong_fpga.h deleted file mode 100644 index 2a619f7377..0000000000 --- a/board/davedenx/qong/qong_fpga.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * - * (c) 2009 Emcraft Systems, Ilya Yanok <yanok@emcraft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef QONG_FPGA_H -#define QONG_FPGA_H - -#define QONG_FPGA_CTRL_BASE CONFIG_FPGA_BASE -#define QONG_FPGA_CTRL_VERSION (QONG_FPGA_CTRL_BASE + 0x00000000) -#define QONG_FPGA_PERIPH_SIZE (1 << 24) - -#define QONG_FPGA_TCK_PIN 26 -#define QONG_FPGA_TMS_PIN 25 -#define QONG_FPGA_TDI_PIN 8 -#define QONG_FPGA_TDO_PIN 7 -#define QONG_FPGA_RST_PIN 48 -#define QONG_FPGA_IRQ_PIN 40 - -int qong_fpga_init(void); -#endif /* QONG_FPGA_H */ diff --git a/board/davinci/da8xxevm/Kconfig b/board/davinci/da8xxevm/Kconfig index 33bfcc3558..7d0de1d0fa 100644 --- a/board/davinci/da8xxevm/Kconfig +++ b/board/davinci/da8xxevm/Kconfig @@ -1,16 +1,3 @@ -if TARGET_DA830EVM - -config SYS_BOARD - default "da8xxevm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "da830evm" - -endif - if TARGET_DA850EVM config SYS_BOARD diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c deleted file mode 100644 index c40587ff09..0000000000 --- a/board/davinci/da8xxevm/da830evm.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com> - * - * Base on code from TI. Original Notices follow: - * - * (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/ - * - * Modified for DA8xx EVM. - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <i2c.h> -#include <net.h> -#include <netdev.h> -#include <asm/arch/hardware.h> -#include <asm/arch/emac_defs.h> -#include <asm/arch/pinmux_defs.h> -#include <asm/io.h> -#include <nand.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/davinci_misc.h> - -#ifdef CONFIG_DAVINCI_MMC -#include <mmc.h> -#include <asm/arch/sdmmc_defs.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -static const struct pinmux_resource pinmuxes[] = { -#ifdef CONFIG_SPI_FLASH - PINMUX_ITEM(spi0_pins_base), - PINMUX_ITEM(spi0_pins_scs0), - PINMUX_ITEM(spi0_pins_ena), -#endif - PINMUX_ITEM(uart2_pins_txrx), - PINMUX_ITEM(i2c0_pins), -#ifdef CONFIG_USB_DA8XX - PINMUX_ITEM(usb_pins), -#endif -#ifdef CONFIG_USE_NAND - PINMUX_ITEM(emifa_pins), - PINMUX_ITEM(emifa_pins_cs0), - PINMUX_ITEM(emifa_pins_cs2), - PINMUX_ITEM(emifa_pins_cs3), -#endif -#if defined(CONFIG_DRIVER_TI_EMAC) - PINMUX_ITEM(emac_pins_rmii), - PINMUX_ITEM(emac_pins_mdio), - PINMUX_ITEM(emac_pins_rmii_clk_source), -#endif -#ifdef CONFIG_DAVINCI_MMC - PINMUX_ITEM(mmc0_pins_8bit) -#endif -}; - -static const struct lpsc_resource lpsc[] = { - { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ - { DAVINCI_LPSC_SPI0 }, /* Serial Flash */ - { DAVINCI_LPSC_EMAC }, /* image download */ - { DAVINCI_LPSC_UART2 }, /* console */ - { DAVINCI_LPSC_GPIO }, -#ifdef CONFIG_DAVINCI_MMC - { DAVINCI_LPSC_MMC_SD }, -#endif - -}; - -#ifdef CONFIG_DAVINCI_MMC -static struct davinci_mmc mmc_sd0 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, - .host_caps = MMC_MODE_8BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_2, -}; - -int board_mmc_init(bd_t *bis) -{ - mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID); - - printf("%x\n", mmc_sd0.input_clk); - - /* Add slot-0 to mmc subsystem */ - return davinci_mmc_init(bis, &mmc_sd0); -} -#endif - -int board_init(void) -{ -#ifndef CONFIG_USE_IRQ - irq_init(); -#endif - -#ifdef CONFIG_NAND_DAVINCI - /* EMIFA 100MHz clock select */ - writel(readl(&davinci_syscfg_regs->cfgchip3) & ~2, - &davinci_syscfg_regs->cfgchip3); - /* NAND CS setup */ - writel((DAVINCI_ABCR_WSETUP(0) | - DAVINCI_ABCR_WSTROBE(2) | - DAVINCI_ABCR_WHOLD(0) | - DAVINCI_ABCR_RSETUP(0) | - DAVINCI_ABCR_RSTROBE(2) | - DAVINCI_ABCR_RHOLD(0) | - DAVINCI_ABCR_TA(2) | - DAVINCI_ABCR_ASIZE_8BIT), - &davinci_emif_regs->ab2cr); -#endif - - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* - * Power on required peripherals - * ARM does not have access by default to PSC0 and PSC1 - * assuming here that the DSP bootloader has set the IOPU - * such that PSC access is available to ARM - */ - if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc))) - return 1; - - /* setup the SUSPSRC for ARM to control emulation suspend */ - writel(readl(&davinci_syscfg_regs->suspsrc) & - ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | - DAVINCI_SYSCFG_SUSPSRC_SPI0 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | - DAVINCI_SYSCFG_SUSPSRC_UART2), - &davinci_syscfg_regs->suspsrc); - - /* configure pinmux settings */ - if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) - return 1; - - /* enable the console UART */ - writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | - DAVINCI_UART_PWREMU_MGMT_UTRST), - &davinci_uart2_ctrl_regs->pwremu_mgmt); - - return(0); -} - - -#ifdef CONFIG_NAND_DAVINCI -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - - return 0; -} -#endif - -#if defined(CONFIG_DRIVER_TI_EMAC) - -#define PHY_SW_I2C_ADDR 0x5f /* Address of PHY on i2c bus */ - -/* - * Initializes on-board ethernet controllers. - */ -int board_eth_init(bd_t *bis) -{ - u_int8_t mac_addr[6]; - u_int8_t switch_start_cmd[2] = { 0x01, 0x23 }; - struct eth_device *dev; - - /* Read Ethernet MAC address from EEPROM */ - if (dvevm_read_mac_address(mac_addr)) - /* set address env if not already set */ - davinci_sync_env_enetaddr(mac_addr); - - /* read the address back from env */ - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) - return -1; - - /* enable the Ethernet switch in the 3 port PHY */ - if (i2c_write(PHY_SW_I2C_ADDR, 0, 0, - switch_start_cmd, sizeof(switch_start_cmd))) { - printf("Ethernet switch start failed!\n"); - return -1; - } - - /* finally, initialise the driver */ - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - - dev = eth_get_dev(); - - /* provide the resulting addr to the driver */ - memcpy(dev->enetaddr, mac_addr, 6); - dev->write_hwaddr(dev); - - return 0; -} -#endif /* CONFIG_DRIVER_TI_EMAC */ diff --git a/board/davinci/dm355evm/Kconfig b/board/davinci/dm355evm/Kconfig deleted file mode 100644 index ec2c27623d..0000000000 --- a/board/davinci/dm355evm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM355EVM - -config SYS_BOARD - default "dm355evm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm355evm" - -endif diff --git a/board/davinci/dm355evm/MAINTAINERS b/board/davinci/dm355evm/MAINTAINERS deleted file mode 100644 index c017e09717..0000000000 --- a/board/davinci/dm355evm/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DM355EVM BOARD -#M: Sandeep Paulraj <s-paulraj@ti.com> -S: Orphan (since 2014-08) -F: board/davinci/dm355evm/ -F: include/configs/davinci_dm355evm.h -F: configs/davinci_dm355evm_defconfig diff --git a/board/davinci/dm355evm/Makefile b/board/davinci/dm355evm/Makefile deleted file mode 100644 index bcb7e6fed5..0000000000 --- a/board/davinci/dm355evm/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm355evm.o diff --git a/board/davinci/dm355evm/config.mk b/board/davinci/dm355evm/config.mk deleted file mode 100644 index 9a063000c3..0000000000 --- a/board/davinci/dm355evm/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# Spectrum Digital DM355 EVM board -# dm355evm board has 1 bank of 128 MB DDR RAM -# Physical Address: 8000'0000 to 8800'0000 -# -# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm355evm/dm355evm.c b/board/davinci/dm355evm/dm355evm.c deleted file mode 100644 index e5a958f7e0..0000000000 --- a/board/davinci/dm355evm/dm355evm.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2009 David Brownell - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/davinci_misc.h> -#include <net.h> -#include <netdev.h> -#ifdef CONFIG_DAVINCI_MMC -#include <mmc.h> -#include <asm/arch/sdmmc_defs.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * With the DM355 EVM, u-boot is *always* a third stage loader, - * unless a JTAG debugger handles the first two stages: - * - * - 1st stage is ROM Boot Loader (RBL), which searches for a - * second stage loader in one of three places based on SW7: - * NAND (with MMC/SD fallback), MMC/SD, or UART. - * - * - 2nd stage is User Boot Loader (UBL), using at most 30KB - * of on-chip SRAM, responsible for lowlevel init, and for - * loading the third stage loader into DRAM. - * - * - 3rd stage, that's us! - */ - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM355_EVM; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - /* We expect the UBL to have handled "lowlevel init", which - * involves setting up at least: - * - clocks - * + PLL1 (for ARM and peripherals) and PLL2 (for DDR) - * + clock divisors for those PLLs - * + LPSC_DDR module enabled - * + LPSC_TIMER0 module (still) enabled - * - EMIF - * + DDR init and timings - * + AEMIF timings (for NAND and DM9000) - * - pinmux - * - * Some of that is repeated here, mostly as a precaution. - */ - - /* AEMIF: Some "address" lines are available as GPIOs. A3..A13 - * could be too if we used A12 as a GPIO during NAND chipselect - * (and Linux did too), letting us control the LED on A7/GPIO61. - */ - REG(PINMUX2) = 0x0c08; - - /* UART0 may still be in SyncReset if we didn't boot from UART */ - davinci_enable_uart0(); - - /* EDMA may be in SyncReset too; turn it on, Linux won't (yet) */ - lpsc_on(DAVINCI_LPSC_TPCC); - lpsc_on(DAVINCI_LPSC_TPTC0); - lpsc_on(DAVINCI_LPSC_TPTC1); - - return 0; -} - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif - -#ifdef CONFIG_NAND_DAVINCI - -static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip) -{ - struct nand_chip *this = mtd->priv; - unsigned long wbase = (unsigned long) this->IO_ADDR_W; - unsigned long rbase = (unsigned long) this->IO_ADDR_R; - - if (chip == 1) { - __set_bit(14, &wbase); - __set_bit(14, &rbase); - } else { - __clear_bit(14, &wbase); - __clear_bit(14, &rbase); - } - this->IO_ADDR_W = (void *)wbase; - this->IO_ADDR_R = (void *)rbase; -} - -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - nand->select_chip = nand_dm355evm_select_chip; - return 0; -} - -#endif - -#ifdef CONFIG_DAVINCI_MMC -static struct davinci_mmc mmc_sd0 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, - .input_clk = 108000000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_1, -}; - -#ifdef CONFIG_DAVINCI_MMC_SD1 -static struct davinci_mmc mmc_sd1 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, - .input_clk = 108000000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_1, -}; -#endif - -int board_mmc_init(bd_t *bis) -{ - int err; - - /* Add slot-0 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd0); - if (err) - return err; - -#ifdef CONFIG_DAVINCI_MMC_SD1 - /* Add slot-1 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd1); -#endif - - return err; -} -#endif diff --git a/board/davinci/dm355leopard/Kconfig b/board/davinci/dm355leopard/Kconfig deleted file mode 100644 index ab4230a637..0000000000 --- a/board/davinci/dm355leopard/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM355LEOPARD - -config SYS_BOARD - default "dm355leopard" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm355leopard" - -endif diff --git a/board/davinci/dm355leopard/MAINTAINERS b/board/davinci/dm355leopard/MAINTAINERS deleted file mode 100644 index ed04d4354b..0000000000 --- a/board/davinci/dm355leopard/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DM355LEOPARD BOARD -#M: Sandeep Paulraj <s-paulraj@ti.com> -S: Orphan (since 2014-08) -F: board/davinci/dm355leopard/ -F: include/configs/davinci_dm355leopard.h -F: configs/davinci_dm355leopard_defconfig diff --git a/board/davinci/dm355leopard/Makefile b/board/davinci/dm355leopard/Makefile deleted file mode 100644 index 7035429c92..0000000000 --- a/board/davinci/dm355leopard/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm355leopard.o diff --git a/board/davinci/dm355leopard/config.mk b/board/davinci/dm355leopard/config.mk deleted file mode 100644 index 28ff3f3d97..0000000000 --- a/board/davinci/dm355leopard/config.mk +++ /dev/null @@ -1,6 +0,0 @@ -# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm355leopard/dm355leopard.c b/board/davinci/dm355leopard/dm355leopard.c deleted file mode 100644 index 53902f996c..0000000000 --- a/board/davinci/dm355leopard/dm355leopard.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/gpio.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/davinci_misc.h> -#include <net.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - struct davinci_gpio *gpio01_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK01; - struct davinci_gpio *gpio23_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK23; - struct davinci_gpio *gpio67_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK67; - - gd->bd->bi_arch_number = MACH_TYPE_DM355_LEOPARD; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - /* GIO 9 & 10 are used for IO */ - writel((readl(PINMUX3) & 0XF8FFFFFF), PINMUX3); - - /* Interrupt set GIO 9 */ - writel((readl(DAVINCI_GPIO_BINTEN) | 0x1), DAVINCI_GPIO_BINTEN); - - /* set GIO 9 input */ - writel((readl(&gpio01_base->dir) | (1 << 9)), &gpio01_base->dir); - - /* Both edge trigger GIO 9 */ - writel((readl(&gpio01_base->set_rising) | (1 << 9)), - &gpio01_base->set_rising); - writel((readl(&gpio01_base->dir) & ~(1 << 5)), &gpio01_base->dir); - - /* output low */ - writel((readl(&gpio01_base->set_data) & ~(1 << 5)), - &gpio01_base->set_data); - - /* set GIO 10 output */ - writel((readl(&gpio01_base->dir) & ~(1 << 10)), &gpio01_base->dir); - - /* output high */ - writel((readl(&gpio01_base->set_data) | (1 << 10)), - &gpio01_base->set_data); - - /* set GIO 32 output */ - writel((readl(&gpio23_base->dir) & ~(1 << 0)), &gpio23_base->dir); - - /* output High */ - writel((readl(&gpio23_base->set_data) | (1 << 0)), - &gpio23_base->set_data); - - /* Enable UART1 MUX Lines */ - writel((readl(PINMUX0) & ~3), PINMUX0); - writel((readl(&gpio67_base->dir) & ~(1 << 6)), &gpio67_base->dir); - writel((readl(&gpio67_base->set_data) | (1 << 6)), - &gpio67_base->set_data); - - return 0; -} - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif - -#ifdef CONFIG_NAND_DAVINCI -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - - return 0; -} -#endif diff --git a/board/davinci/dm365evm/Kconfig b/board/davinci/dm365evm/Kconfig deleted file mode 100644 index 724c7b6204..0000000000 --- a/board/davinci/dm365evm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM365EVM - -config SYS_BOARD - default "dm365evm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm365evm" - -endif diff --git a/board/davinci/dm365evm/MAINTAINERS b/board/davinci/dm365evm/MAINTAINERS deleted file mode 100644 index 97c3ed3b69..0000000000 --- a/board/davinci/dm365evm/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DM365EVM BOARD -#M: Sandeep Paulraj <s-paulraj@ti.com> -S: Orphan (since 2014-08) -F: board/davinci/dm365evm/ -F: include/configs/davinci_dm365evm.h -F: configs/davinci_dm365evm_defconfig diff --git a/board/davinci/dm365evm/Makefile b/board/davinci/dm365evm/Makefile deleted file mode 100644 index d35d81c2bf..0000000000 --- a/board/davinci/dm365evm/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm365evm.o diff --git a/board/davinci/dm365evm/config.mk b/board/davinci/dm365evm/config.mk deleted file mode 100644 index 7b1e900e8c..0000000000 --- a/board/davinci/dm365evm/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# Spectrum Digital DM365 EVM board -# DM365 EVM board has 1 bank of 128 MB DDR RAM -# Physical Address: 8000'0000 to 8800'0000 -# -# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c deleted file mode 100644 index 24bec56d56..0000000000 --- a/board/davinci/dm365evm/dm365evm.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/gpio.h> -#include <netdev.h> -#include <asm/arch/davinci_misc.h> -#ifdef CONFIG_DAVINCI_MMC -#include <mmc.h> -#include <asm/arch/sdmmc_defs.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM365_EVM; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -#ifdef CONFIG_DRIVER_TI_EMAC -int board_eth_init(bd_t *bis) -{ - uint8_t eeprom_enetaddr[6]; - int i; - struct davinci_gpio *gpio1_base = - (struct davinci_gpio *)DAVINCI_GPIO_BANK01; - - /* Configure PINMUX 3 to enable EMAC pins */ - writel((readl(PINMUX3) | 0x1affff), PINMUX3); - - /* Configure GPIO20 as output */ - writel((readl(&gpio1_base->dir) & ~(1 << 20)), &gpio1_base->dir); - - /* Toggle GPIO 20 */ - for (i = 0; i < 20; i++) { - /* GPIO 20 low */ - writel((readl(&gpio1_base->out_data) & ~(1 << 20)), - &gpio1_base->out_data); - - udelay(1000); - - /* GPIO 20 high */ - writel((readl(&gpio1_base->out_data) | (1 << 20)), - &gpio1_base->out_data); - } - - /* Configure I2C pins so that EEPROM can be read */ - writel((readl(PINMUX3) | 0x01400000), PINMUX3); - - /* Read Ethernet MAC address from EEPROM */ - if (dvevm_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - davinci_emac_initialize(); - - return 0; -} -#endif - -#ifdef CONFIG_NAND_DAVINCI -static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip) -{ - struct nand_chip *this = mtd->priv; - unsigned long wbase = (unsigned long) this->IO_ADDR_W; - unsigned long rbase = (unsigned long) this->IO_ADDR_R; - - if (chip == 1) { - __set_bit(14, &wbase); - __set_bit(14, &rbase); - } else { - __clear_bit(14, &wbase); - __clear_bit(14, &rbase); - } - this->IO_ADDR_W = (void *)wbase; - this->IO_ADDR_R = (void *)rbase; -} - -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - nand->select_chip = nand_dm365evm_select_chip; - return 0; -} -#endif - -#ifdef CONFIG_DAVINCI_MMC -static struct davinci_mmc mmc_sd0 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, - .input_clk = 121500000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_2, -}; - -#ifdef CONFIG_DAVINCI_MMC_SD1 -static struct davinci_mmc mmc_sd1 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, - .input_clk = 121500000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_2, -}; -#endif - -int board_mmc_init(bd_t *bis) -{ - int err; - - /* Add slot-0 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd0); - if (err) - return err; - -#ifdef CONFIG_DAVINCI_MMC_SD1 -#define PUPDCTL1 0x01c4007c - /* PINMUX(4)-DAT0-3/CMD; PINMUX(0)-CLK */ - writel((readl(PINMUX4) | 0x55400000), PINMUX4); - writel((readl(PINMUX0) | 0x00010000), PINMUX0); - - /* Configure MMC/SD pins as pullup */ - writel((readl(PUPDCTL1) & ~0x07c0), PUPDCTL1); - - /* Add slot-1 to mmc subsystem */ - err = davinci_mmc_init(bis, &mmc_sd1); -#endif - - return err; -} -#endif diff --git a/board/davinci/dm6467evm/Kconfig b/board/davinci/dm6467evm/Kconfig deleted file mode 100644 index 56d2ab487d..0000000000 --- a/board/davinci/dm6467evm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DM6467EVM - -config SYS_BOARD - default "dm6467evm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dm6467evm" - -endif diff --git a/board/davinci/dm6467evm/MAINTAINERS b/board/davinci/dm6467evm/MAINTAINERS deleted file mode 100644 index 8ca53c43c8..0000000000 --- a/board/davinci/dm6467evm/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -DM6467EVM BOARD -#M: Sandeep Paulraj <s-paulraj@ti.com> -S: Orphan (since 2014-08) -F: board/davinci/dm6467evm/ -F: include/configs/davinci_dm6467evm.h -F: configs/davinci_dm6467evm_defconfig -F: configs/davinci_dm6467Tevm_defconfig diff --git a/board/davinci/dm6467evm/Makefile b/board/davinci/dm6467evm/Makefile deleted file mode 100644 index acbbdd5032..0000000000 --- a/board/davinci/dm6467evm/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dm6467evm.o diff --git a/board/davinci/dm6467evm/config.mk b/board/davinci/dm6467evm/config.mk deleted file mode 100644 index 3751043890..0000000000 --- a/board/davinci/dm6467evm/config.mk +++ /dev/null @@ -1,2 +0,0 @@ -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c deleted file mode 100644 index e51cc9e638..0000000000 --- a/board/davinci/dm6467evm/dm6467evm.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/io.h> -#include <nand.h> -#include <asm/arch/hardware.h> -#include <asm/ti-common/davinci_nand.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define REV_DM6467EVM 0 -#define REV_DM6467TEVM 1 -/* - * get_board_rev() - setup to pass kernel board revision information - * Returns: - * bit[0-3] System clock frequency - * 0000b - 27 MHz - * 0001b - 33 MHz - */ -u32 get_board_rev(void) -{ - -#ifdef CONFIG_DAVINCI_DM6467TEVM - return REV_DM6467TEVM; -#else - return REV_DM6467EVM; -#endif - -} - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - lpsc_on(DAVINCI_DM646X_LPSC_TIMER0); - lpsc_on(DAVINCI_DM646X_LPSC_UART0); - lpsc_on(DAVINCI_DM646X_LPSC_I2C); - lpsc_on(DAVINCI_DM646X_LPSC_EMAC); - - /* Enable GIO3.3V cells used for EMAC */ - REG(VDD3P3V_PWDN) = 0x80000c0; - - /* Select UART function on UART0 */ - REG(PINMUX0) &= ~(0x0000003f << 18); - REG(PINMUX1) &= ~(0x00000003); - - return 0; -} - -#if defined(CONFIG_DRIVER_TI_EMAC) - -int board_eth_init(bd_t *bis) -{ - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - - return 0; -} -#endif /* CONFIG_DRIVER_TI_EMAC */ - -#ifdef CONFIG_NAND_DAVINCI -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - - return 0; -} -#endif diff --git a/board/davinci/dvevm/Kconfig b/board/davinci/dvevm/Kconfig deleted file mode 100644 index 3f0ef82215..0000000000 --- a/board/davinci/dvevm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_DVEVM - -config SYS_BOARD - default "dvevm" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_dvevm" - -endif diff --git a/board/davinci/dvevm/MAINTAINERS b/board/davinci/dvevm/MAINTAINERS deleted file mode 100644 index a718b90050..0000000000 --- a/board/davinci/dvevm/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DVEVM BOARD -#M: - -S: Maintained -F: board/davinci/dvevm/ -F: include/configs/davinci_dvevm.h -F: configs/davinci_dvevm_defconfig diff --git a/board/davinci/dvevm/Makefile b/board/davinci/dvevm/Makefile deleted file mode 100644 index 7ade325968..0000000000 --- a/board/davinci/dvevm/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dvevm.o -obj-y += board_init.o diff --git a/board/davinci/dvevm/board_init.S b/board/davinci/dvevm/board_init.S deleted file mode 100644 index ded0590084..0000000000 --- a/board/davinci/dvevm/board_init.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: - - mov pc, lr diff --git a/board/davinci/dvevm/config.mk b/board/davinci/dvevm/config.mk deleted file mode 100644 index ed80707231..0000000000 --- a/board/davinci/dvevm/config.mk +++ /dev/null @@ -1,39 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Swaminathan <swami.iyer@ti.com> -# -# Davinci EVM board (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# Davinci EVM has 1 bank of 256 MB DDR RAM -# Physical Address: -# 8000'0000 to 9000'0000 -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# Visioneering Corp. Sonata board (ARM926EJS) cpu -# -# Sonata board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu -# -# Schmoogie board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# we load ourself to 8108 '0000 -# -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c deleted file mode 100644 index c34bde4fa6..0000000000 --- a/board/davinci/dvevm/dvevm.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <i2c.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Configure AEMIF pins (although this should be configured at boot time - * with pull-up/pull-down resistors) */ - REG(PINMUX0) = 0x00000c1f; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - lpsc_on(DAVINCI_LPSC_USB); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -int misc_init_r(void) -{ - uint8_t video_mode; - uint8_t eeprom_enetaddr[6]; - - /* Read Ethernet MAC address from EEPROM if available. */ - if (dvevm_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - i2c_read(0x39, 0x00, 1, &video_mode, 1); - - setenv("videostd", ((video_mode & 0x80) ? "pal" : "ntsc")); - - return(0); -} - -#ifdef CONFIG_USB_DAVINCI - -/* IO Expander I2C address and USB VBUS enable mask */ -#define IOEXP_I2C_ADDR 0x3A -#define IOEXP_VBUSEN_MASK 1 - -/* - * This function enables USB VBUS by writting to IO expander using I2C. - * Note that the I2C is already initialized at this stage. This - * function is used by davinci specific USB wrapper code. - */ -void enable_vbus(void) -{ - uchar data; /* IO Expander data to enable VBUS */ - - /* Write to IO expander to enable VBUS */ - i2c_read(IOEXP_I2C_ADDR, 0, 0, &data, 1); - data &= ~IOEXP_VBUSEN_MASK; - i2c_write(IOEXP_I2C_ADDR, 0, 0, &data, 1); -} -#endif diff --git a/board/davinci/schmoogie/Kconfig b/board/davinci/schmoogie/Kconfig deleted file mode 100644 index 35810755f9..0000000000 --- a/board/davinci/schmoogie/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_SCHMOOGIE - -config SYS_BOARD - default "schmoogie" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_schmoogie" - -endif diff --git a/board/davinci/schmoogie/MAINTAINERS b/board/davinci/schmoogie/MAINTAINERS deleted file mode 100644 index 808e7fc046..0000000000 --- a/board/davinci/schmoogie/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SCHMOOGIE BOARD -#M: - -S: Maintained -F: board/davinci/schmoogie/ -F: include/configs/davinci_schmoogie.h -F: configs/davinci_schmoogie_defconfig diff --git a/board/davinci/schmoogie/Makefile b/board/davinci/schmoogie/Makefile deleted file mode 100644 index e170d551ff..0000000000 --- a/board/davinci/schmoogie/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := schmoogie.o -obj-y += board_init.o diff --git a/board/davinci/schmoogie/board_init.S b/board/davinci/schmoogie/board_init.S deleted file mode 100644 index ded0590084..0000000000 --- a/board/davinci/schmoogie/board_init.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: - - mov pc, lr diff --git a/board/davinci/schmoogie/config.mk b/board/davinci/schmoogie/config.mk deleted file mode 100644 index ed80707231..0000000000 --- a/board/davinci/schmoogie/config.mk +++ /dev/null @@ -1,39 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Swaminathan <swami.iyer@ti.com> -# -# Davinci EVM board (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# Davinci EVM has 1 bank of 256 MB DDR RAM -# Physical Address: -# 8000'0000 to 9000'0000 -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# Visioneering Corp. Sonata board (ARM926EJS) cpu -# -# Sonata board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu -# -# Schmoogie board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# we load ourself to 8108 '0000 -# -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/schmoogie/schmoogie.c b/board/davinci/schmoogie/schmoogie.c deleted file mode 100644 index 741afc4df3..0000000000 --- a/board/davinci/schmoogie/schmoogie.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <i2c.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Configure AEMIF pins (although this should be configured at boot time - * with pull-up/pull-down resistors) */ - REG(PINMUX0) = 0x00000c1f; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -int misc_init_r(void) -{ - u_int8_t tmp[20], buf[10]; - int i = 0; - - /* Set serial number from UID chip */ - const u_int8_t crc_tbl[256] = { - 0x00, 0x5e, 0xbc, 0xe2, 0x61, 0x3f, 0xdd, 0x83, - 0xc2, 0x9c, 0x7e, 0x20, 0xa3, 0xfd, 0x1f, 0x41, - 0x9d, 0xc3, 0x21, 0x7f, 0xfc, 0xa2, 0x40, 0x1e, - 0x5f, 0x01, 0xe3, 0xbd, 0x3e, 0x60, 0x82, 0xdc, - 0x23, 0x7d, 0x9f, 0xc1, 0x42, 0x1c, 0xfe, 0xa0, - 0xe1, 0xbf, 0x5d, 0x03, 0x80, 0xde, 0x3c, 0x62, - 0xbe, 0xe0, 0x02, 0x5c, 0xdf, 0x81, 0x63, 0x3d, - 0x7c, 0x22, 0xc0, 0x9e, 0x1d, 0x43, 0xa1, 0xff, - 0x46, 0x18, 0xfa, 0xa4, 0x27, 0x79, 0x9b, 0xc5, - 0x84, 0xda, 0x38, 0x66, 0xe5, 0xbb, 0x59, 0x07, - 0xdb, 0x85, 0x67, 0x39, 0xba, 0xe4, 0x06, 0x58, - 0x19, 0x47, 0xa5, 0xfb, 0x78, 0x26, 0xc4, 0x9a, - 0x65, 0x3b, 0xd9, 0x87, 0x04, 0x5a, 0xb8, 0xe6, - 0xa7, 0xf9, 0x1b, 0x45, 0xc6, 0x98, 0x7a, 0x24, - 0xf8, 0xa6, 0x44, 0x1a, 0x99, 0xc7, 0x25, 0x7b, - 0x3a, 0x64, 0x86, 0xd8, 0x5b, 0x05, 0xe7, 0xb9, - 0x8c, 0xd2, 0x30, 0x6e, 0xed, 0xb3, 0x51, 0x0f, - 0x4e, 0x10, 0xf2, 0xac, 0x2f, 0x71, 0x93, 0xcd, - 0x11, 0x4f, 0xad, 0xf3, 0x70, 0x2e, 0xcc, 0x92, - 0xd3, 0x8d, 0x6f, 0x31, 0xb2, 0xec, 0x0e, 0x50, - 0xaf, 0xf1, 0x13, 0x4d, 0xce, 0x90, 0x72, 0x2c, - 0x6d, 0x33, 0xd1, 0x8f, 0x0c, 0x52, 0xb0, 0xee, - 0x32, 0x6c, 0x8e, 0xd0, 0x53, 0x0d, 0xef, 0xb1, - 0xf0, 0xae, 0x4c, 0x12, 0x91, 0xcf, 0x2d, 0x73, - 0xca, 0x94, 0x76, 0x28, 0xab, 0xf5, 0x17, 0x49, - 0x08, 0x56, 0xb4, 0xea, 0x69, 0x37, 0xd5, 0x8b, - 0x57, 0x09, 0xeb, 0xb5, 0x36, 0x68, 0x8a, 0xd4, - 0x95, 0xcb, 0x29, 0x77, 0xf4, 0xaa, 0x48, 0x16, - 0xe9, 0xb7, 0x55, 0x0b, 0x88, 0xd6, 0x34, 0x6a, - 0x2b, 0x75, 0x97, 0xc9, 0x4a, 0x14, 0xf6, 0xa8, - 0x74, 0x2a, 0xc8, 0x96, 0x15, 0x4b, 0xa9, 0xf7, - 0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35 - }; - - /* Set serial number from UID chip */ - if (i2c_read(CONFIG_SYS_UID_ADDR, 0, 1, buf, 8)) { - printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR); - setenv("serial#", "FAILED"); - } else { - if (buf[0] != 0x70) { - /* Device Family Code */ - printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR); - setenv("serial#", "FAILED"); - } - } - /* Now check CRC */ - tmp[0] = 0; - for (i = 0; i < 8; i++) - tmp[0] = crc_tbl[tmp[0] ^ buf[i]]; - - if (tmp[0] != 0) { - printf("\nUID @ 0x%02x - BAD CRC!!!\n", CONFIG_SYS_UID_ADDR); - setenv("serial#", "FAILED"); - } else { - /* CRC OK, set "serial" env variable */ - sprintf((char *)&tmp[0], "%02x%02x%02x%02x%02x%02x", - buf[6], buf[5], buf[4], buf[3], buf[2], buf[1]); - setenv("serial#", (char *)&tmp[0]); - } - - return(0); -} diff --git a/board/davinci/sffsdr/Kconfig b/board/davinci/sffsdr/Kconfig deleted file mode 100644 index dc48f3118c..0000000000 --- a/board/davinci/sffsdr/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_SFFSDR - -config SYS_BOARD - default "sffsdr" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_sffsdr" - -endif diff --git a/board/davinci/sffsdr/MAINTAINERS b/board/davinci/sffsdr/MAINTAINERS deleted file mode 100644 index 5c7e1324a9..0000000000 --- a/board/davinci/sffsdr/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SFFSDR BOARD -#M: - -S: Maintained -F: board/davinci/sffsdr/ -F: include/configs/davinci_sffsdr.h -F: configs/davinci_sffsdr_defconfig diff --git a/board/davinci/sffsdr/Makefile b/board/davinci/sffsdr/Makefile deleted file mode 100644 index 4ab30a4061..0000000000 --- a/board/davinci/sffsdr/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := sffsdr.o -obj-y += board_init.o diff --git a/board/davinci/sffsdr/board_init.S b/board/davinci/sffsdr/board_init.S deleted file mode 100644 index ded0590084..0000000000 --- a/board/davinci/sffsdr/board_init.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: - - mov pc, lr diff --git a/board/davinci/sffsdr/config.mk b/board/davinci/sffsdr/config.mk deleted file mode 100644 index 4fe900799d..0000000000 --- a/board/davinci/sffsdr/config.mk +++ /dev/null @@ -1,23 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -# -# Copyright (C) 2008 Lyrtech <www.lyrtech.com> -# Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com> -# -# Lyrtech SFF SDR board (ARM926EJS) cpu -# -# SFF SDR board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 87FF'FFFF -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# Integrity kernel is expected to be at 8000'0000, entry 8000'00D0, -# up to 81FF'FFFF (uses up to 32 MB of memory for text, heap, etc). -# -# we load ourself to 8400'0000 to provide at least 32MB spacing -# between us and the Integrity kernel image -CONFIG_SYS_TEXT_BASE = 0x84000000 diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c deleted file mode 100644 index f6ab91e6ff..0000000000 --- a/board/davinci/sffsdr/sffsdr.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Copyright (C) 2008 Lyrtech <www.lyrtech.com> - * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com> - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * - * Copyright (C) 2004 Texas Instruments. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <i2c.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -#define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */ -#define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */ - -#define INTEGRITY_SYSCFG_OFFSET 0x7E8 -#define INTEGRITY_CHECKWORD_OFFSET 0x7F8 -#define INTEGRITY_CHECKWORD_VALUE 0x10ADBEEF - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_SFFSDR; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -/* Read ethernet MAC address from Integrity data structure inside EEPROM. - * Returns 1 if found, 0 otherwise. - */ -static int sffsdr_read_mac_address(uint8_t *buf) -{ - u_int32_t value, mac[2], address; - - /* Read Integrity data structure checkword. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - if (value != INTEGRITY_CHECKWORD_VALUE) - return 0; - - /* Read SYSCFG structure offset. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - address = 0x800 + (int) value; /* Address of SYSCFG structure. */ - - /* Read NET CONFIG structure offset. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - address = 0x800 + (int) value; /* Address of NET CONFIG structure. */ - address += 12; /* Address of NET INTERFACE CONFIG structure. */ - - /* Read NET INTERFACE CONFIG 2 structure offset. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) - goto err; - address = 0x800 + 16 + (int) value; /* Address of NET INTERFACE - * CONFIG 2 structure. */ - - /* Read MAC address. */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8)) - goto err; - - buf[0] = mac[0] >> 24; - buf[1] = mac[0] >> 16; - buf[2] = mac[0] >> 8; - buf[3] = mac[0]; - buf[4] = mac[1] >> 24; - buf[5] = mac[1] >> 16; - - return 1; /* Found */ - -err: - printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR); - return 0; -} - -/* Platform dependent initialisation. */ -int misc_init_r(void) -{ - uint8_t i2cbuf; - uint8_t eeprom_enetaddr[6]; - - /* EMIF-A CS3 configuration for FPGA. */ - REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL; - - /* Configure I2C switch (PCA9543) to enable channel 0. */ - i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0; - if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0, - CONFIG_SYS_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) { - printf("Write to MUX @ 0x%02x failed\n", CONFIG_SYS_I2C_PCA9543_ADDR); - return 1; - } - - /* Read Ethernet MAC address from EEPROM if available. */ - if (sffsdr_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - return(0); -} diff --git a/board/davinci/sonata/Kconfig b/board/davinci/sonata/Kconfig deleted file mode 100644 index 4440d95bc2..0000000000 --- a/board/davinci/sonata/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DAVINCI_SONATA - -config SYS_BOARD - default "sonata" - -config SYS_VENDOR - default "davinci" - -config SYS_CONFIG_NAME - default "davinci_sonata" - -endif diff --git a/board/davinci/sonata/MAINTAINERS b/board/davinci/sonata/MAINTAINERS deleted file mode 100644 index 40659e5210..0000000000 --- a/board/davinci/sonata/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SONATA BOARD -#M: - -S: Maintained -F: board/davinci/sonata/ -F: include/configs/davinci_sonata.h -F: configs/davinci_sonata_defconfig diff --git a/board/davinci/sonata/Makefile b/board/davinci/sonata/Makefile deleted file mode 100644 index 92e1a180c0..0000000000 --- a/board/davinci/sonata/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := sonata.o -obj-y += board_init.o diff --git a/board/davinci/sonata/board_init.S b/board/davinci/sonata/board_init.S deleted file mode 100644 index 0a47ad5ebb..0000000000 --- a/board/davinci/sonata/board_init.S +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Board-specific low level initialization code. Called at the very end - * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no - * initialization required. - * - * For _OLDER_ Sonata boards sets up GPIO4 to control NAND WP line. Newer - * Sonata boards, AFAIK, don't use this so it's just return by default. Ask - * Visioneering if they reinvented the wheel once again to make sure :) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -.globl dv_board_init -dv_board_init: -#ifdef SONATA_BOARD_GPIOWP - /* Set PINMUX0 to enable GPIO4 */ - ldr r0, _PINMUX0 - ldr r1, GPIO4_EN_MASK - ldr r2, [r0] - and r2, r2, r1 - str r2, [r0] - - /* Enable GPIO LPSC module */ - ldr r0, PTSTAT - -gpio_ptstat_loop1: - ldr r2, [r0] - tst r2, $0x00000001 - bne gpio_ptstat_loop1 - - ldr r1, MDCTL_GPIO - ldr r2, [r1] - and r2, r2, $0xfffffff8 - orr r2, r2, $0x00000003 - str r2, [r1] - - orr r2, r2, $0x00000200 - str r2, [r1] - - ldr r1, PTCMD - mov r2, $0x00000001 - str r2, [r1] - -gpio_ptstat_loop2: - ldr r2, [r0] - tst r2, $0x00000001 - bne gpio_ptstat_loop2 - - ldr r0, MDSTAT_GPIO -gpio_mdstat_loop: - ldr r2, [r0] - and r2, r2, $0x0000001f - teq r2, $0x00000003 - bne gpio_mdstat_loop - - /* GPIO4 -> output */ - ldr r0, GPIO_DIR01 - mov r1, $0x10 - ldr r2, [r0] - bic r2, r2, r0 - str r2, [r0] - - /* Set it to 0 (Write Protect) */ - ldr r0, GPIO_CLR_DATA01 - str r1, [r0] -#endif - - mov pc, lr - -#ifdef SONATA_BOARD_GPIOWP -.ltorg - -GPIO4_EN_MASK: - .word 0xf77fffff -MDCTL_GPIO: - .word 0x01c41a68 -MDSTAT_GPIO: - .word 0x01c41868 -GPIO_DIR01: - .word 0x01c67010 -GPIO_CLR_DATA01: - .word 0x01c6701c -#endif diff --git a/board/davinci/sonata/config.mk b/board/davinci/sonata/config.mk deleted file mode 100644 index ed80707231..0000000000 --- a/board/davinci/sonata/config.mk +++ /dev/null @@ -1,39 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Swaminathan <swami.iyer@ti.com> -# -# Davinci EVM board (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# Davinci EVM has 1 bank of 256 MB DDR RAM -# Physical Address: -# 8000'0000 to 9000'0000 -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# Visioneering Corp. Sonata board (ARM926EJS) cpu -# -# Sonata board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu -# -# Schmoogie board has 1 bank of 128 MB DDR RAM -# Physical Address: -# 8000'0000 to 8800'0000 -# -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# -# we load ourself to 8108 '0000 -# -# - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0x81080000 diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c deleted file mode 100644 index f5c3258de5..0000000000 --- a/board/davinci/sonata/sonata.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <nand.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/hardware.h> -#include <asm/arch/davinci_misc.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Configure AEMIF pins (although this should be configured at boot time - * with pull-up/pull-down resistors) */ - REG(PINMUX0) = 0x00000c1f; - - davinci_errata_workarounds(); - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_GPIO); - -#if !defined(CONFIG_SYS_USE_DSPLINK) - /* Powerup the DSP */ - dsp_on(); -#endif /* CONFIG_SYS_USE_DSPLINK */ - - davinci_enable_uart0(); - davinci_enable_emac(); - davinci_enable_i2c(); - - lpsc_on(DAVINCI_LPSC_TIMER1); - timer_init(); - - return(0); -} - -int misc_init_r(void) -{ - uint8_t eeprom_enetaddr[6]; - - /* Read Ethernet MAC address from EEPROM if available. */ - if (dvevm_read_mac_address(eeprom_enetaddr)) - davinci_sync_env_enetaddr(eeprom_enetaddr); - - return(0); -} - -#ifdef CONFIG_NAND_DAVINCI - -/* Set WP on deselect, write enable on select */ -static void nand_sonata_select_chip(struct mtd_info *mtd, int chip) -{ -#define GPIO_SET_DATA01 0x01c67018 -#define GPIO_CLR_DATA01 0x01c6701c -#define GPIO_NAND_WP (1 << 4) -#ifdef SONATA_BOARD_GPIOWP - if (chip < 0) { - REG(GPIO_CLR_DATA01) |= GPIO_NAND_WP; - } else { - REG(GPIO_SET_DATA01) |= GPIO_NAND_WP; - } -#endif -} - -int board_nand_init(struct nand_chip *nand) -{ - davinci_nand_init(nand); - nand->select_chip = nand_sonata_select_chip; - return 0; -} - -#endif /* CONFIG_NAND_DAVINCI */ diff --git a/board/denx/mcvevk/qts/iocsr_config.h b/board/denx/mcvevk/qts/iocsr_config.h index e40274f5d8..3021830d00 100644 --- a/board/denx/mcvevk/qts/iocsr_config.h +++ b/board/denx/mcvevk/qts/iocsr_config.h @@ -130,7 +130,7 @@ const unsigned long iocsr_scan_chain2_table[] = { }; const unsigned long iocsr_scan_chain3_table[] = { - 0x0CC20D80, + 0x0C420D80, 0x0C3000FF, 0x0A804001, 0x07900000, @@ -181,17 +181,17 @@ const unsigned long iocsr_scan_chain3_table[] = { 0x00001000, 0xA0000034, 0x0D000001, - 0xC0680618, - 0x45034071, - 0x1A681A01, - 0x806180D0, - 0x34071C06, - 0x01A034D0, - 0x380D0000, - 0x0820680E, - 0x034D0340, + 0xC0680A28, + 0x45034030, + 0x12481A01, + 0x80A280D0, + 0x34030C06, + 0x01A01450, + 0x280D0000, + 0x30C0680A, + 0x02490340, 0xD000001A, - 0x0680E380, + 0x0680A280, 0x10040000, 0x00200000, 0x10040000, @@ -255,17 +255,17 @@ const unsigned long iocsr_scan_chain3_table[] = { 0x00001000, 0xA0000034, 0x0D000001, - 0xC0680618, - 0x45034071, - 0x1A681A01, - 0x80E380D0, - 0x34071C06, + 0xC0680A28, + 0x49034030, + 0x12481A02, + 0x80A280D0, + 0x34030C06, 0x01A00040, - 0x380D0002, - 0x71C0680E, - 0x034D0340, - 0xD01A681A, - 0x06806180, + 0x280D0002, + 0x30C0680A, + 0x02490340, + 0xD00A281A, + 0x0680A280, 0x10040000, 0x00200000, 0x10040000, @@ -285,7 +285,7 @@ const unsigned long iocsr_scan_chain3_table[] = { 0xAA0D4000, 0x01C3A800, 0xAA0D4000, - 0x01C3A800, + 0x01C3A890, 0xAA0D4000, 0x01C3A800, 0x00040100, @@ -313,7 +313,7 @@ const unsigned long iocsr_scan_chain3_table[] = { 0x2A835000, 0x0070EA00, 0x2A835000, - 0x0070EA00, + 0x0070EA24, 0x2A835000, 0x0070EA00, 0x00010040, @@ -330,18 +330,18 @@ const unsigned long iocsr_scan_chain3_table[] = { 0x14F3690D, 0x1A041414, 0x00D00000, - 0x04864000, - 0x69A47A01, - 0x932CA3DA, - 0xF459651E, - 0x03549248, + 0x18864000, + 0x49247A06, + 0x9A28A3D7, + 0xF511451E, + 0x0356E388, 0x821A0000, 0x0000D000, - 0x030C0680, - 0xDA69A47A, - 0x1E9228A3, - 0x48F45965, - 0x000354D3, + 0x05140680, + 0xD749247A, + 0x1E9A28A3, + 0x88F51145, + 0x00034EE3, 0x00080000, 0x00001000, 0x00080200, @@ -359,7 +359,7 @@ const unsigned long iocsr_scan_chain3_table[] = { 0xAA0D4000, 0x01C3A800, 0xAA0D4000, - 0x01C3A800, + 0x01C3A890, 0xAA0D4000, 0x01C3A800, 0x00040000, @@ -387,7 +387,7 @@ const unsigned long iocsr_scan_chain3_table[] = { 0x2A835000, 0x0070EA00, 0x2A835000, - 0x0070EA00, + 0x0070EA24, 0x2A835000, 0x0070EA00, 0x00015000, @@ -404,18 +404,18 @@ const unsigned long iocsr_scan_chain3_table[] = { 0x14F3690D, 0x1A041414, 0x00D00000, - 0x14864000, - 0x59647A05, - 0xE228A3D6, - 0xF459651E, - 0x034CD348, - 0x821A0041, + 0x18864000, + 0x49247A06, + 0xEBCF23D7, + 0xF611451E, + 0x034E9248, + 0x821A038E, 0x0000D000, 0x00000680, - 0xD669A47A, - 0x1E9228A3, - 0x48F45965, - 0x00034492, + 0xD749247A, + 0x1E9BCF23, + 0x88F61145, + 0x00034EE3, 0x00080000, 0x00001000, 0x00080000, @@ -433,7 +433,7 @@ const unsigned long iocsr_scan_chain3_table[] = { 0xAA0D4000, 0x01C3A800, 0xAA0D4000, - 0x01C3A800, + 0x01C3A890, 0xAA0D4000, 0x01C3A800, 0x00040000, @@ -478,18 +478,18 @@ const unsigned long iocsr_scan_chain3_table[] = { 0x14F3690D, 0x1A041414, 0x00D00000, - 0x14864000, - 0x59647A05, - 0x9228A3D6, - 0xF459651E, - 0x034CD348, + 0x18864000, + 0x49247A06, + 0x9A28A3D7, + 0xF431451E, + 0x034E9248, 0x821A0000, 0x0000D000, 0x00000680, - 0xD659647A, - 0x1E932CA3, - 0x48F65965, - 0x00034CD3, + 0xD749247A, + 0x1E9A28A3, + 0x88F61145, + 0x000356E3, 0x00080000, 0x00001000, 0x00080000, @@ -552,18 +552,18 @@ const unsigned long iocsr_scan_chain3_table[] = { 0x14F1690D, 0x1A041414, 0x00D00000, - 0x14864000, - 0x59647A05, - 0x932CA3D6, - 0xF659651E, - 0x034CD348, + 0x08864000, + 0x49247A02, + 0xEBCF23DB, + 0xF431451E, + 0x0356E388, 0x821A0000, 0x0000D000, 0x00000680, - 0xD669A47A, - 0x1E9228A3, - 0x48F45965, - 0x00034CD3, + 0xD749247A, + 0x1EEBCF23, + 0x88F43E79, + 0x000356A2, 0x00080000, 0x00001000, 0x00080000, diff --git a/board/denx/mcvevk/qts/pll_config.h b/board/denx/mcvevk/qts/pll_config.h index aff4648d70..b718b39e96 100644 --- a/board/denx/mcvevk/qts/pll_config.h +++ b/board/denx/mcvevk/qts/pll_config.h @@ -45,8 +45,8 @@ #define CONFIG_HPS_PERPLLGRP_SRC_NAND 2 #define CONFIG_HPS_PERPLLGRP_SRC_QSPI 1 -#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM 2 -#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER 79 +#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM 0 +#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER 31 #define CONFIG_HPS_SDRPLLGRP_VCO_SSRC 0 #define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT 1 #define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE 0 @@ -63,7 +63,7 @@ #define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0 #define CONFIG_HPS_CLK_MAINVCO_HZ 1600000000 #define CONFIG_HPS_CLK_PERVCO_HZ 1000000000 -#define CONFIG_HPS_CLK_SDRVCO_HZ 666666666 +#define CONFIG_HPS_CLK_SDRVCO_HZ 800000000 #define CONFIG_HPS_CLK_EMAC0_HZ 250000000 #define CONFIG_HPS_CLK_EMAC1_HZ 1953125 #define CONFIG_HPS_CLK_USBCLK_HZ 200000000 diff --git a/board/denx/mcvevk/qts/sdram_config.h b/board/denx/mcvevk/qts/sdram_config.h index cf9d1d3aff..30c4d7d02a 100644 --- a/board/denx/mcvevk/qts/sdram_config.h +++ b/board/denx/mcvevk/qts/sdram_config.h @@ -34,19 +34,19 @@ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL 0 #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL 6 #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL 6 -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW 14 -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC 117 -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD 4 -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD 5 -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI 1300 -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP 5 -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR 5 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW 16 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC 140 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD 5 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD 6 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI 1560 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP 6 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR 6 #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR 4 #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD 4 #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD 4 -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS 12 -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC 17 -#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP 4 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS 14 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC 20 +#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP 5 #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT 3 #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT 512 #define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC 0 @@ -132,7 +132,7 @@ #define ENABLE_SUPER_QUICK_CALIBRATION 0 #define IO_DELAY_PER_DCHAIN_TAP 25 #define IO_DELAY_PER_DQS_EN_DCHAIN_TAP 25 -#define IO_DELAY_PER_OPA_TAP 375 +#define IO_DELAY_PER_OPA_TAP 312 #define IO_DLL_CHAIN_LENGTH 8 #define IO_DQDQS_OUT_PHASE_MAX 0 #define IO_DQS_EN_DELAY_MAX 31 @@ -147,7 +147,7 @@ #define IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS 0 #define MAX_LATENCY_COUNT_WIDTH 5 #define READ_VALID_FIFO_SIZE 16 -#define REG_FILE_INIT_SEQ_SIGNATURE 0x5555048d +#define REG_FILE_INIT_SEQ_SIGNATURE 0x55550496 #define RW_MGR_MEM_ADDRESS_MIRRORING 0 #define RW_MGR_MEM_DATA_MASK_WIDTH 4 #define RW_MGR_MEM_DATA_WIDTH 32 @@ -160,10 +160,10 @@ #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1 #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1 #define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4 -#define TINIT_CNTR0_VAL 82 +#define TINIT_CNTR0_VAL 99 #define TINIT_CNTR1_VAL 32 #define TINIT_CNTR2_VAL 32 -#define TRESET_CNTR0_VAL 82 +#define TRESET_CNTR0_VAL 99 #define TRESET_CNTR1_VAL 99 #define TRESET_CNTR2_VAL 10 @@ -171,14 +171,14 @@ const u32 ac_rom_init[] = { 0x20700000, 0x20780000, - 0x10080221, - 0x10080320, + 0x10080421, + 0x10080520, 0x10090044, 0x100a0008, 0x100b0000, 0x10380400, - 0x10080241, - 0x100802c0, + 0x10080441, + 0x100804c0, 0x100a0024, 0x10090010, 0x100b0000, diff --git a/board/embest/mx6boards/Kconfig b/board/embest/mx6boards/Kconfig index 53a39d31dd..24d01f2266 100644 --- a/board/embest/mx6boards/Kconfig +++ b/board/embest/mx6boards/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "embest" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "embestmx6boards" diff --git a/board/enbw/enbw_cmc/Kconfig b/board/enbw/enbw_cmc/Kconfig deleted file mode 100644 index 796736d865..0000000000 --- a/board/enbw/enbw_cmc/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_ENBW_CMC - -config SYS_BOARD - default "enbw_cmc" - -config SYS_VENDOR - default "enbw" - -config SYS_CONFIG_NAME - default "enbw_cmc" - -endif diff --git a/board/enbw/enbw_cmc/MAINTAINERS b/board/enbw/enbw_cmc/MAINTAINERS deleted file mode 100644 index f7c99207db..0000000000 --- a/board/enbw/enbw_cmc/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ENBW_CMC BOARD -M: Heiko Schocher <hs@denx.de> -S: Maintained -F: board/enbw/enbw_cmc/ -F: include/configs/enbw_cmc.h -F: configs/enbw_cmc_defconfig diff --git a/board/enbw/enbw_cmc/Makefile b/board/enbw/enbw_cmc/Makefile deleted file mode 100644 index 054d6e7c83..0000000000 --- a/board/enbw/enbw_cmc/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := enbw_cmc.o diff --git a/board/enbw/enbw_cmc/enbw_cmc.c b/board/enbw/enbw_cmc/enbw_cmc.c deleted file mode 100644 index 53b8362147..0000000000 --- a/board/enbw/enbw_cmc/enbw_cmc.c +++ /dev/null @@ -1,893 +0,0 @@ -/* - * (C) Copyright 2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on da830evm.c. Original Copyrights follow: - * - * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com> - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <environment.h> -#include <hwconfig.h> -#include <i2c.h> -#include <malloc.h> -#include <miiphy.h> -#include <mmc.h> -#include <net.h> -#include <netdev.h> -#include <spi.h> -#include <linux/ctype.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/arch/da850_lowlevel.h> -#include <asm/arch/davinci_misc.h> -#include <asm/ti-common/davinci_nand.h> -#include <asm/arch/emac_defs.h> -#include <asm/arch/gpio.h> -#include <asm/arch/pinmux_defs.h> -#include <asm/arch/hardware.h> -#include <asm/arch/sdmmc_defs.h> -#include <asm/arch/timer_defs.h> -#include <asm/davinci_rtc.h> - -DECLARE_GLOBAL_DATA_PTR; - -const struct lpsc_resource lpsc[] = { - { DAVINCI_LPSC_AEMIF }, - { DAVINCI_LPSC_SPI1 }, - { DAVINCI_LPSC_ARM_RAM_ROM }, - { DAVINCI_LPSC_UART0 }, - { DAVINCI_LPSC_EMAC }, - { DAVINCI_LPSC_UART0 }, - { DAVINCI_LPSC_GPIO }, - { DAVINCI_LPSC_DDR_EMIF }, - { DAVINCI_LPSC_UART1 }, - { DAVINCI_LPSC_UART2 }, - { DAVINCI_LPSC_MMC_SD1 }, - { DAVINCI_LPSC_USB20 }, - { DAVINCI_LPSC_USB11 }, -}; - -const int lpsc_size = ARRAY_SIZE(lpsc); - -static const struct pinmux_config enbw_pins[] = { - { pinmux(0), 8, 0 }, - { pinmux(0), 8, 1 }, - { pinmux(0), 8, 2 }, - { pinmux(0), 8, 3 }, - { pinmux(0), 8, 4 }, - { pinmux(0), 8, 5 }, - { pinmux(1), 4, 0 }, - { pinmux(1), 8, 1 }, - { pinmux(1), 8, 2 }, - { pinmux(1), 8, 3 }, - { pinmux(1), 8, 4 }, - { pinmux(1), 8, 5 }, - { pinmux(1), 8, 6 }, - { pinmux(1), 4, 7 }, - { pinmux(2), 8, 0 }, - { pinmux(5), 1, 0 }, - { pinmux(5), 1, 3 }, - { pinmux(5), 1, 7 }, - { pinmux(5), 1, 5 }, - { pinmux(5), 1, 4 }, - { pinmux(5), 1, 3 }, - { pinmux(5), 1, 2 }, - { pinmux(5), 1, 1 }, - { pinmux(5), 1, 0 }, - { pinmux(6), 8, 0 }, - { pinmux(6), 8, 1 }, - { pinmux(6), 8, 2 }, - { pinmux(6), 8, 3 }, - { pinmux(6), 8, 4 }, - { pinmux(6), 8, 5 }, - { pinmux(6), 1, 7 }, - { pinmux(7), 8, 2 }, - { pinmux(7), 1, 3 }, - { pinmux(7), 8, 6 }, - { pinmux(7), 1, 7 }, - { pinmux(13), 8, 2 }, - { pinmux(13), 8, 3 }, - { pinmux(13), 8, 4 }, - { pinmux(13), 8, 5 }, - { pinmux(13), 8, 6 }, - { pinmux(13), 8, 7 }, - { pinmux(14), 8, 0 }, - { pinmux(14), 8, 1 }, - { pinmux(16), 8, 1 }, - { pinmux(16), 8, 2 }, - { pinmux(16), 8, 3 }, - { pinmux(16), 8, 4 }, - { pinmux(16), 8, 5 }, - { pinmux(16), 8, 6 }, - { pinmux(16), 8, 7 }, - { pinmux(17), 1, 0 }, - { pinmux(17), 1, 1 }, - { pinmux(17), 1, 2 }, - { pinmux(17), 8, 3 }, - { pinmux(17), 8, 4 }, - { pinmux(17), 8, 5 }, - { pinmux(17), 8, 6 }, - { pinmux(17), 8, 7 }, - { pinmux(18), 8, 0 }, - { pinmux(18), 8, 1 }, - { pinmux(18), 2, 2 }, - { pinmux(18), 2, 3 }, - { pinmux(18), 2, 4 }, - { pinmux(18), 8, 6 }, - { pinmux(18), 8, 7 }, - { pinmux(19), 8, 0 }, - { pinmux(19), 2, 1 }, - { pinmux(19), 2, 2 }, - { pinmux(19), 2, 3 }, - { pinmux(19), 2, 4 }, - { pinmux(19), 8, 5 }, - { pinmux(19), 8, 6 }, -}; - -const struct pinmux_resource pinmuxes[] = { - PINMUX_ITEM(emac_pins_mii), - PINMUX_ITEM(emac_pins_mdio), - PINMUX_ITEM(i2c0_pins), - PINMUX_ITEM(emifa_pins_cs2), - PINMUX_ITEM(emifa_pins_cs3), - PINMUX_ITEM(emifa_pins_cs4), - PINMUX_ITEM(emifa_pins_nand), - PINMUX_ITEM(emifa_pins_nor), - PINMUX_ITEM(spi1_pins_base), - PINMUX_ITEM(spi1_pins_scs0), - PINMUX_ITEM(uart1_pins_txrx), - PINMUX_ITEM(uart2_pins_txrx), - PINMUX_ITEM(uart2_pins_rtscts), - PINMUX_ITEM(enbw_pins), -}; - -const int pinmuxes_size = ARRAY_SIZE(pinmuxes); - -struct gpio_config { - char name[GPIO_NAME_SIZE]; - unsigned char bank; - unsigned char gpio; - unsigned char out; - unsigned char value; -}; - -static const struct gpio_config enbw_gpio_config_hut[] = { - { "RS485 enable", 8, 11, 1, 0 }, - { "RS485 iso", 8, 10, 1, 1 }, - { "W2HUT RS485 Rx ena", 8, 9, 1, 0 }, - { "W2HUT RS485 iso", 8, 8, 1, 1 }, -}; - -static const struct gpio_config enbw_gpio_config_w[] = { - { "RS485 enable", 8, 11, 1, 0 }, - { "RS485 iso", 8, 10, 1, 0 }, - { "W2HUT RS485 Rx ena", 8, 9, 1, 0 }, - { "W2HUT RS485 iso", 8, 8, 1, 0 }, -}; - -static const struct gpio_config enbw_gpio_config[] = { - { "LAN reset", 7, 15, 1, 1 }, - { "ena 11V PLC", 7, 14, 1, 0 }, - { "ena 1.5V PLC", 7, 13, 1, 0 }, - { "disable VBUS", 7, 12, 1, 1 }, - { "PLC reset", 6, 13, 1, 0 }, - { "LCM RS", 6, 12, 1, 0 }, - { "LCM R/W", 6, 11, 1, 0 }, - { "PLC pairing", 6, 10, 1, 1 }, - { "PLC MDIO CLK", 6, 9, 1, 0 }, - { "HK218", 6, 8, 1, 0 }, - { "HK218 Rx", 6, 1, 1, 1 }, - { "TPM reset", 6, 0, 1, 0 }, - { "Board-Type", 3, 9, 0, 0 }, - { "HW-ID0", 2, 7, 0, 0 }, - { "HW-ID1", 2, 6, 0, 0 }, - { "HW-ID2", 2, 3, 0, 0 }, - { "PV-IF RxD ena", 0, 15, 1, 1 }, - { "LED1", 1, 15, 1, 1 }, - { "LED2", 0, 1, 1, 1 }, - { "LED3", 0, 2, 1, 1 }, - { "LED4", 0, 3, 1, 1 }, - { "LED5", 0, 4, 1, 1 }, - { "LED6", 0, 5, 1, 0 }, - { "LED7", 0, 6, 1, 0 }, - { "LED8", 0, 14, 1, 0 }, - { "USER1", 0, 12, 0, 0 }, - { "USER2", 0, 13, 0, 0 }, -}; - -#define PHY_POWER 0x0800 - -static void enbw_cmc_switch(int port, int on) -{ - const char *devname; - unsigned char phyaddr = 3; - unsigned char reg = 0; - unsigned short data; - - if (port == 1) - phyaddr = 2; - - devname = miiphy_get_current_dev(); - if (!devname) { - printf("Error: no mii device\n"); - return; - } - if (miiphy_read(devname, phyaddr, reg, &data) != 0) { - printf("Error reading from the PHY addr=%02x reg=%02x\n", - phyaddr, reg); - return; - } - - if (on) - data &= ~PHY_POWER; - else - data |= PHY_POWER; - - if (miiphy_write(devname, phyaddr, reg, data) != 0) { - printf("Error writing to the PHY addr=%02x reg=%02x\n", - phyaddr, reg); - return; - } -} - -static int enbw_cmc_init_gpio(const struct gpio_config *conf, int sz) -{ - int i, ret; - - for (i = 0; i < sz; i++) { - int gpio = conf[i].bank * 16 + - conf[i].gpio; - - ret = gpio_request(gpio, conf[i].name); - if (ret) { - printf("%s: Could not get %s gpio\n", __func__, - conf[i].name); - return ret; - } - - if (conf[i].out) - gpio_direction_output(gpio, - conf[i].value); - else - gpio_direction_input(gpio); - } - - return 0; -} - -int board_init(void) -{ - int board_type, hw_id; - -#ifndef CONFIG_USE_IRQ - irq_init(); -#endif - /* address of boot parameters, not used as booting with DTT */ - gd->bd->bi_boot_params = 0; - - enbw_cmc_init_gpio(enbw_gpio_config, ARRAY_SIZE(enbw_gpio_config)); - - /* detect HW version */ - board_type = gpio_get_value(CONFIG_ENBW_CMC_BOARD_TYPE); - hw_id = gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT0) + - (gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT1) << 1) + - (gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT2) << 2); - printf("BOARD: CMC-%s hw id: %d\n", (board_type ? "w2" : "hut"), - hw_id); - if (board_type) - enbw_cmc_init_gpio(enbw_gpio_config_w, - ARRAY_SIZE(enbw_gpio_config_w)); - else - enbw_cmc_init_gpio(enbw_gpio_config_hut, - ARRAY_SIZE(enbw_gpio_config_hut)); - - /* setup the SUSPSRC for ARM to control emulation suspend */ - clrbits_le32(&davinci_syscfg_regs->suspsrc, - (DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | - DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | - DAVINCI_SYSCFG_SUSPSRC_UART2)); - - return 0; -} - -#ifdef CONFIG_DRIVER_TI_EMAC - -#define KSZ_CMD_READ 0x03 -#define KSZ_CMD_WRITE 0x02 -#define KSZ_ID 0x95 - -static int enbw_cmc_switch_read(struct spi_slave *spi, u8 reg, u8 *val) -{ - unsigned long flags = SPI_XFER_BEGIN; - int ret; - int cmd_len; - u8 cmd[2]; - - cmd[0] = KSZ_CMD_READ; - cmd[1] = reg; - cmd_len = 2; - - ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); - if (ret) { - debug("Failed to send command (%zu bytes): %d\n", - cmd_len, ret); - return -EINVAL; - } - flags |= SPI_XFER_END; - *val = 0; - cmd_len = 1; - ret = spi_xfer(spi, cmd_len * 8, NULL, val, flags); - if (ret) { - debug("Failed to read (%zu bytes): %d\n", - cmd_len, ret); - return -EINVAL; - } - - return 0; -} - -static int enbw_cmc_switch_read_ident(struct spi_slave *spi) -{ - int ret; - u8 val; - - ret = enbw_cmc_switch_read(spi, 0, &val); - if (ret) { - debug("Failed to read\n"); - return -EINVAL; - } - - if (val != KSZ_ID) - return -EINVAL; - - return 0; -} - -static int enbw_cmc_switch_write(struct spi_slave *spi, unsigned long reg, - unsigned long val) -{ - unsigned long flags = SPI_XFER_BEGIN; - int ret; - int cmd_len; - u8 cmd[3]; - - cmd[0] = KSZ_CMD_WRITE; - cmd[1] = reg; - cmd[2] = val; - cmd_len = 3; - flags |= SPI_XFER_END; - - ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); - if (ret) { - debug("Failed to send command (%zu bytes): %d\n", - cmd_len, ret); - return -EINVAL; - } - - udelay(1000); - ret = enbw_cmc_switch_read(spi, reg, &cmd[0]); - if (ret) { - debug("Failed to read\n"); - return -EINVAL; - } - if (val != cmd[0]) - debug("warning: reg: %lx va: %x soll: %lx\n", - reg, cmd[0], val); - - return 0; -} - -static int enbw_cmc_eof(unsigned char *ptr) -{ - if (*ptr == 0xff) - return 1; - - return 0; -} - -static char *enbw_cmc_getnewline(char *ptr) -{ - while (*ptr != 0x0a) { - ptr++; - if (enbw_cmc_eof((unsigned char *)ptr)) - return NULL; - } - - ptr++; - return ptr; -} - -static char *enbw_cmc_getvalue(char *ptr, int *value) -{ - int end = 0; - - *value = -EINVAL; - - if (!isxdigit(*ptr)) - end = 1; - - while (end) { - if ((*ptr == '#') || (*ptr == ';')) { - ptr = enbw_cmc_getnewline(ptr); - return ptr; - } - if (ptr != NULL) { - if (isxdigit(*ptr)) { - end = 0; - } else if (*ptr == 0x0a) { - ptr++; - return ptr; - } else { - ptr++; - if (enbw_cmc_eof((unsigned char *)ptr)) - return NULL; - } - } else { - return NULL; - } - } - *value = (int)simple_strtoul((const char *)ptr, &ptr, 16); - ptr++; - return ptr; -} - -static struct spi_slave *enbw_cmc_init_spi(void) -{ - struct spi_slave *spi; - int ret; - - spi = spi_setup_slave(0, 0, 1000000, 0); - if (!spi) { - printf("Failed to set up slave\n"); - return NULL; - } - - ret = spi_claim_bus(spi); - if (ret) { - debug("Failed to claim SPI bus: %d\n", ret); - goto err_claim_bus; - } - - ret = enbw_cmc_switch_read_ident(spi); - if (ret) - goto err_read; - - return spi; -err_read: - spi_release_bus(spi); -err_claim_bus: - spi_free_slave(spi); - return NULL; -} - -static int enbw_cmc_config_switch(unsigned long addr) -{ - struct spi_slave *spi; - char *ptr = (char *)addr; - int value, reg; - int ret = 0; - - debug("configure switch with file on addr: 0x%lx\n", addr); - - spi = enbw_cmc_init_spi(); - if (!spi) - return -EINVAL; - - while (ptr != NULL) { - ptr = enbw_cmc_getvalue(ptr, ®); - if (ptr != NULL) { - ptr = enbw_cmc_getvalue(ptr, &value); - if ((ptr != NULL) && (value >= 0)) - if (enbw_cmc_switch_write(spi, reg, value)) { - /* error writing to switch */ - ptr = NULL; - ret = -EINVAL; - } - } - } - - spi_release_bus(spi); - spi_free_slave(spi); - return ret; -} - -static int do_switch(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) -{ - unsigned long addr; - - if (argc < 2) - return cmd_usage(cmdtp); - - addr = simple_strtoul(argv[1], NULL, 16); - enbw_cmc_config_switch(addr); - - return 0; -} - -U_BOOT_CMD(switch, 3, 1, do_switch, - "switch addr", - "[addr]" -); - -/* - * Initializes on-board ethernet controllers. - */ -int board_eth_init(bd_t *bis) -{ - struct spi_slave *spi; - const char *s; - size_t len = 0; - int config = 1; - - davinci_emac_mii_mode_sel(0); - - /* send a config file to the switch */ - s = hwconfig_subarg("switch", "config", &len); - if (len) { - unsigned long addr = simple_strtoul(s, NULL, 16); - - config = enbw_cmc_config_switch(addr); - } - - if (config) { - /* - * no valid config file -> do we have some args in - * hwconfig ? - */ - if ((hwconfig_subarg("switch", "lan", &len)) || - (hwconfig_subarg("switch", "lmn", &len))) { - /* If so start switch */ - spi = enbw_cmc_init_spi(); - if (spi) { - if (enbw_cmc_switch_write(spi, 1, 0)) - config = 0; - udelay(10000); - if (enbw_cmc_switch_write(spi, 1, 1)) - config = 0; - spi_release_bus(spi); - spi_free_slave(spi); - } - } else { - config = 0; - } - } - if (!davinci_emac_initialize()) { - printf("Error: Ethernet init failed!\n"); - return -1; - } - - if (config) { - if (hwconfig_subarg_cmp("switch", "lan", "on")) - /* Switch port lan on */ - enbw_cmc_switch(1, 1); - else - enbw_cmc_switch(1, 0); - - if (hwconfig_subarg_cmp("switch", "lmn", "on")) - /* Switch port pwl on */ - enbw_cmc_switch(2, 1); - else - enbw_cmc_switch(2, 0); - } - - return 0; -} -#endif /* CONFIG_DRIVER_TI_EMAC */ - -#ifdef CONFIG_PREBOOT -static uchar kbd_magic_prefix[] = "key_magic_"; -static uchar kbd_command_prefix[] = "key_cmd_"; - -struct kbd_data_t { - char s1; -}; - -struct kbd_data_t *get_keys(struct kbd_data_t *kbd_data) -{ - /* read SW1 + SW2 */ - kbd_data->s1 = gpio_get_value(12) + - (gpio_get_value(13) << 1); - return kbd_data; -} - -static int compare_magic(const struct kbd_data_t *kbd_data, char *str) -{ - char s1 = str[0]; - - if (s1 >= '0' && s1 <= '9') - s1 -= '0'; - else if (s1 >= 'a' && s1 <= 'f') - s1 = s1 - 'a' + 10; - else if (s1 >= 'A' && s1 <= 'F') - s1 = s1 - 'A' + 10; - else - return -1; - - if (s1 != kbd_data->s1) - return -1; - - return 0; -} - -static char *key_match(const struct kbd_data_t *kbd_data) -{ - char magic[sizeof(kbd_magic_prefix) + 1]; - char *suffix; - char *kbd_magic_keys; - - /* - * The following string defines the characters that can be appended - * to "key_magic" to form the names of environment variables that - * hold "magic" key codes, i. e. such key codes that can cause - * pre-boot actions. If the string is empty (""), then only - * "key_magic" is checked (old behaviour); the string "125" causes - * checks for "key_magic1", "key_magic2" and "key_magic5", etc. - */ - kbd_magic_keys = getenv("magic_keys"); - if (kbd_magic_keys == NULL) - kbd_magic_keys = ""; - - /* - * loop over all magic keys; - * use '\0' suffix in case of empty string - */ - for (suffix = kbd_magic_keys; *suffix || - suffix == kbd_magic_keys; ++suffix) { - sprintf(magic, "%s%c", kbd_magic_prefix, *suffix); - - if (compare_magic(kbd_data, getenv(magic)) == 0) { - char cmd_name[sizeof(kbd_command_prefix) + 1]; - char *cmd; - - sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix); - cmd = getenv(cmd_name); - - return cmd; - } - } - - return NULL; -} -#endif /* CONFIG_PREBOOT */ - -int misc_init_r(void) -{ - char *s, buf[32]; -#ifdef CONFIG_PREBOOT - struct kbd_data_t kbd_data; - /* Decode keys */ - char *str = strdup(key_match(get_keys(&kbd_data))); - /* Set or delete definition */ - setenv("preboot", str); - free(str); -#endif /* CONFIG_PREBOOT */ - - /* count all restarts, and save this in an environment var */ - s = getenv("restartcount"); - - if (s) - sprintf(buf, "%ld", simple_strtoul(s, NULL, 10) + 1); - else - strcpy(buf, "1"); - - setenv("restartcount", buf); - saveenv(); - -#ifdef CONFIG_HW_WATCHDOG - davinci_hw_watchdog_enable(); -#endif - - return 0; -} - -struct cmc_led { - char name[20]; - unsigned char bank; - unsigned char gpio; -}; - -struct cmc_led led_table[] = { - {"led1", 1, 15}, - {"led2", 0, 1}, - {"led3", 0, 2}, - {"led4", 0, 3}, - {"led5", 0, 4}, - {"led6", 0, 5}, - {"led7", 0, 6}, - {"led8", 0, 14}, -}; - -static int cmc_get_led_state(struct cmc_led *led) -{ - int value; - int gpio = led->bank * 16 + led->gpio; - - value = gpio_get_value(gpio); - - return value; -} - -static int cmc_set_led_state(struct cmc_led *led, int state) -{ - int gpio = led->bank * 16 + led->gpio; - - gpio_set_value(gpio, state); - return 0; -} - -static int do_led(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) -{ - struct cmc_led *led; - int found = 0; - int i = 0; - int only_print = 0; - int len = ARRAY_SIZE(led_table); - - if (argc < 2) - return cmd_usage(cmdtp); - - if (argc < 3) - only_print = 1; - - led = led_table; - while ((!found) && (i < len)) { - if (strcmp(argv[1], led->name) == 0) { - found = 1; - } else { - led++; - i++; - } - } - if (!found) - return cmd_usage(cmdtp); - - if (only_print) { - if (cmc_get_led_state(led)) - printf("on\n"); - else - printf("off\n"); - - return 0; - } - if (strcmp(argv[2], "on") == 0) - cmc_set_led_state(led, 1); - else - cmc_set_led_state(led, 0); - - return 0; -} - -U_BOOT_CMD(led, 3, 1, do_led, - "switch on/off board led", - "[name] [on/off]" -); - -#ifdef CONFIG_HW_WATCHDOG -void hw_watchdog_reset(void) -{ - davinci_hw_watchdog_reset(); -} -#endif - -#if defined(CONFIG_POST) -void arch_memory_failure_handle(void) -{ - struct davinci_gpio *gpio = davinci_gpio_bank01; - int state = 1; - - /* - * if memor< failure blink with the LED 1,2 and 3 - * as we running from flash, we cannot use the gpio - * api here, so access the gpio pin direct through - * the gpio register. - */ - while (1) { - if (state) { - clrbits_le32(&gpio->out_data, 0x80000006); - state = 0; - } else { - setbits_le32(&gpio->out_data, 0x80000006); - state = 1; - } - udelay(500); - } -} -#endif - -ulong post_word_load(void) -{ - struct davinci_rtc *reg = - (struct davinci_rtc *)CONFIG_SYS_POST_WORD_ADDR; - - return in_be32(®->scratch2); -} - -void post_word_store(ulong value) -{ - struct davinci_rtc *reg = - (struct davinci_rtc *)CONFIG_SYS_POST_WORD_ADDR; - - /* - * write RTC kick register to enable write - * for RTC Scratch registers. Cratch0 and 1 are - * used for bootcount values. - */ - writel(RTC_KICK0R_WE, ®->kick0r); - writel(RTC_KICK1R_WE, ®->kick1r); - out_be32(®->scratch2, value); -} - -void board_gpio_init(void) -{ - struct davinci_gpio *gpio = davinci_gpio_bank01; - - /* - * set LED (gpio Interface not usable here) - * set LED pins to output and state 0 - */ - clrbits_le32(&gpio->dir, 0x8000407e); - clrbits_le32(&gpio->out_data, 0x8000407e); - /* set LED 1 - 5 to state on */ - setbits_le32(&gpio->out_data, 0x8000001e); - - /* - * set some gpio pins to low, this is needed early, - * so we have no gpio Interface here - * gpios: - * 8[8] Mode PV select low - * 8[9] Debug Rx Enable low - * 8[10] Mode Select PV low - * 8[11] Counter Interface RS485 Rx-Enable low - */ - gpio = davinci_gpio_bank8; - clrbits_le32(&gpio->dir, 0x00000f00); - clrbits_le32(&gpio->out_data, 0x0f00); -} - -int board_late_init(void) -{ - cmc_set_led_state(&led_table[4], 0); - - return 0; -} - -void show_boot_progress(int val) -{ - switch (val) { - case 1: - cmc_set_led_state(&led_table[4], 1); - break; - case 4: - cmc_set_led_state(&led_table[4], 0); - break; - case 15: - cmc_set_led_state(&led_table[4], 1); - break; - } -} - -#ifdef CONFIG_DAVINCI_MMC -static struct davinci_mmc mmc_sd1 = { - .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, - .input_clk = 228000000, - .host_caps = MMC_MODE_4BIT, - .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - .version = MMC_CTLR_VERSION_2, -}; - -int board_mmc_init(bd_t *bis) -{ - mmc_sd1.input_clk = clk_get(DAVINCI_MMC_CLKID); - /* Add slot-0 to mmc subsystem */ - return davinci_mmc_init(bis, &mmc_sd1); -} -#endif diff --git a/board/esd/otc570/Kconfig b/board/esd/otc570/Kconfig deleted file mode 100644 index 4966f5f755..0000000000 --- a/board/esd/otc570/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OTC570 - -config SYS_BOARD - default "otc570" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "otc570" - -endif diff --git a/board/esd/otc570/MAINTAINERS b/board/esd/otc570/MAINTAINERS deleted file mode 100644 index a7e165d8ba..0000000000 --- a/board/esd/otc570/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -OTC570 BOARD -M: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> -S: Maintained -F: board/esd/otc570/ -F: include/configs/otc570.h -F: configs/otc570_defconfig -F: configs/otc570_dataflash_defconfig diff --git a/board/esd/otc570/Makefile b/board/esd/otc570/Makefile deleted file mode 100644 index 740bb0a282..0000000000 --- a/board/esd/otc570/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop <stelian@popies.net> -# Lead Tech Design <www.leadtechdesign.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += otc570.o -obj-$(CONFIG_HAS_DATAFLASH) += partition.o diff --git a/board/esd/otc570/otc570.c b/board/esd/otc570/otc570.c deleted file mode 100644 index 4751d0a9e9..0000000000 --- a/board/esd/otc570/otc570.c +++ /dev/null @@ -1,372 +0,0 @@ -/* - * (C) Copyright 2010-2011 - * Daniel Gorsulowski <daniel.gorsulowski@esd.eu> - * esd electronic system design gmbh <www.esd.eu> - * - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/arch/at91sam9_smc.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_rstc.h> -#include <asm/arch/at91_matrix.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/clk.h> -#include <netdev.h> -#ifdef CONFIG_LCD -# include <atmel_lcdc.h> -# include <lcd.h> -# ifdef CONFIG_LCD_INFO -# include <nand.h> -# include <version.h> -# endif -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -static int hw_rev = -1; /* hardware revision */ - -int get_hw_rev(void) -{ - if (hw_rev >= 0) - return hw_rev; - - hw_rev = at91_get_pio_value(AT91_PIO_PORTB, 19); - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 20) << 1; - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 21) << 2; - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 22) << 3; - - if (hw_rev == 15) - hw_rev = 0; - - return hw_rev; -} - -#ifdef CONFIG_CMD_NAND -static void otc570_nand_hw_init(void) -{ - unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0; - at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX; - - /* Enable CS3 */ - csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; - writel(csa, &matrix->csa[0]); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | - AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(2), - &smc->cs[3].setup); - - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - - writel(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(6), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(12), - &smc->cs[3].mode); - - /* Configure RDY/BSY */ - gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); - - /* Enable NandFlash */ - gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} -#endif /* CONFIG_CMD_NAND */ - -#ifdef CONFIG_MACB -static void otc570_macb_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); - at91_macb_hw_init(); -} -#endif - -/* - * Static memory controller initialization to enable Beckhoff ET1100 EtherCAT - * controller debugging - * The ET1100 is located at physical address 0x70000000 - * Its process memory is located at physical address 0x70001000 - */ -static void otc570_ethercat_hw_init(void) -{ - at91_smc_t *smc1 = (at91_smc_t *) ATMEL_BASE_SMC1; - - /* Configure SMC EBI1_CS0 for EtherCAT */ - writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0), - &smc1->cs[0].setup); - writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(9) | - AT91_SMC_PULSE_NRD(5) | AT91_SMC_PULSE_NCS_RD(9), - &smc1->cs[0].pulse); - writel(AT91_SMC_CYCLE_NWE(10) | AT91_SMC_CYCLE_NRD(6), - &smc1->cs[0].cycle); - /* - * Configure behavior at external wait signal, byte-select mode, 16 bit - * data bus width, none data float wait states and TDF optimization - */ - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_EXNW_READY | - AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_TDF_CYCLE(0) | - AT91_SMC_MODE_TDF, &smc1->cs[0].mode); - - /* Configure RDY/BSY */ - at91_set_b_periph(AT91_PIO_PORTE, 20, 0); /* EBI1_NWAIT */ -} - -#ifdef CONFIG_LCD -/* Number of columns and rows, pixel clock in Hz and hsync/vsync polarity */ -vidinfo_t panel_info = { - .vl_col = 640, - .vl_row = 480, - .vl_clk = 25175000, - .vl_sync = ATMEL_LCDC_INVLINE_INVERTED | - ATMEL_LCDC_INVFRAME_INVERTED, - - .vl_bpix = LCD_BPP,/* Bits per pixel, 0 = 1bit, 3 = 8bit */ - .vl_tft = 1, /* 0 = passive, 1 = TFT */ - .vl_vsync_len = 1, /* Length of vertical sync in NOL */ - .vl_upper_margin = 35, /* Idle lines at the frame start */ - .vl_lower_margin = 5, /* Idle lines at the end of the frame */ - .vl_hsync_len = 5, /* Width of the LCDHSYNC pulse */ - .vl_left_margin = 112, /* Idle cycles at the line beginning */ - .vl_right_margin = 1, /* Idle cycles at the end of the line */ - - .mmio = ATMEL_BASE_LCDC, -}; - -void lcd_enable(void) -{ - at91_set_pio_value(AT91_PIO_PORTA, 30, 0); /* power up */ -} - -void lcd_disable(void) -{ - at91_set_pio_value(AT91_PIO_PORTA, 30, 1); /* power down */ -} - -static void otc570_lcd_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */ - at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */ - at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */ - at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */ - at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */ - at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */ - at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */ - at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */ - at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */ - at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ - at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ - at91_set_pio_output(AT91_PIO_PORTA, 30, 1); /* PCI */ - - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); -} - -#ifdef CONFIG_LCD_INFO -void lcd_show_board_info(void) -{ - ulong dram_size, nand_size; - int i; - char temp[32]; - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - nand_size = 0; - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += nand_info[i].size; - - lcd_printf("\n%s\n", U_BOOT_VERSION); - lcd_printf("CPU at %s MHz\n", strmhz(temp, get_cpu_clk_rate())); - lcd_printf(" %ld MB SDRAM, %ld MB NAND\n", - dram_size >> 20, - nand_size >> 20 ); - lcd_printf(" Board : esd ARM9 HMI Panel - OTC570\n"); - lcd_printf(" Hardware-revision: 1.%d\n", get_hw_rev()); - lcd_printf(" Mach-type : %lu\n", gd->bd->bi_arch_number); -} -#endif /* CONFIG_LCD_INFO */ -#endif /* CONFIG_LCD */ - -int dram_init(void) -{ - gd->ram_size = get_ram_size( - (void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); -#endif - return rc; -} - -int checkboard(void) -{ - char str[32]; - - puts("Board : esd ARM9 HMI Panel - OTC570"); - if (getenv_f("serial#", str, sizeof(str)) > 0) { - puts(", serial# "); - puts(str); - } - printf("\n"); - printf("Hardware-revision: 1.%d\n", get_hw_rev()); - printf("Mach-type : %lu\n", gd->bd->bi_arch_number); - return 0; -} - -#ifdef CONFIG_SERIAL_TAG -void get_board_serial(struct tag_serialnr *serialnr) -{ - char *str; - - char *serial = getenv("serial#"); - if (serial) { - str = strchr(serial, '_'); - if (str && (strlen(str) >= 4)) { - serialnr->high = (*(str + 1) << 8) | *(str + 2); - serialnr->low = simple_strtoul(str + 3, NULL, 16); - } - } else { - serialnr->high = 0; - serialnr->low = 0; - } -} -#endif - -#ifdef CONFIG_REVISION_TAG -u32 get_board_rev(void) -{ - return hw_rev | 0x100; -} -#endif - -#ifdef CONFIG_MISC_INIT_R -int misc_init_r(void) -{ - char str[64]; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_pio_output(AT91_PIO_PORTA, 29, 1); - at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); - /* Set USART_MODE = 1 (RS485) */ - writel(1, 0xFFF8C004); - - printf("USART0: "); - - if (getenv_f("usart0", str, sizeof(str)) == -1) { - printf("No entry - assuming 1-wire\n"); - /* CTS pin, works as mode select pin (0 = 1-wire; 1 = RS485) */ - at91_set_pio_output(AT91_PIO_PORTA, 29, 0); - } else { - if (strcmp(str, "1-wire") == 0) { - printf("%s\n", str); - at91_set_pio_output(AT91_PIO_PORTA, 29, 0); - } else if (strcmp(str, "rs485") == 0) { - printf("%s\n", str); - at91_set_pio_output(AT91_PIO_PORTA, 29, 1); - } else { - printf("Wrong entry - assuming 1-wire "); - printf("(valid values are '1-wire' or 'rs485')\n"); - at91_set_pio_output(AT91_PIO_PORTA, 29, 0); - } - } -#ifdef CONFIG_LCD - printf("Display memory address: 0x%08lX\n", gd->fb_base); -#endif - - return 0; -} -#endif /* CONFIG_MISC_INIT_R */ - -int board_early_init_f(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - /* enable all clocks */ - writel((1 << ATMEL_ID_PIOA) | - (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOCDE) | - (1 << ATMEL_ID_TWI) | - (1 << ATMEL_ID_SPI0) | -#ifdef CONFIG_LCD - (1 << ATMEL_ID_LCDC) | -#endif - (1 << ATMEL_ID_UHP), - &pmc->pcer); - - at91_seriald_hw_init(); - - /* arch number of OTC570-Board */ - gd->bd->bi_arch_number = MACH_TYPE_OTC570; - - return 0; -} - -int board_init(void) -{ - /* initialize ET1100 Controller */ - otc570_ethercat_hw_init(); - - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - -#ifdef CONFIG_CMD_NAND - otc570_nand_hw_init(); -#endif -#ifdef CONFIG_HAS_DATAFLASH - at91_spi0_hw_init(1 << 0); -#endif -#ifdef CONFIG_MACB - otc570_macb_hw_init(); -#endif -#ifdef CONFIG_AT91_CAN - at91_can_hw_init(); -#endif -#ifdef CONFIG_USB_OHCI_NEW - at91_uhp_hw_init(); -#endif -#ifdef CONFIG_LCD - otc570_lcd_hw_init(); -#endif - return 0; -} diff --git a/board/esd/otc570/partition.c b/board/esd/otc570/partition.c deleted file mode 100644 index b6afafc239..0000000000 --- a/board/esd/otc570/partition.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * (C) Copyright 2008 - * Ulf Samuelsson <ulf@atmel.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <config.h> -#include <asm/hardware.h> -#include <dataflash.h> - -AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; - -struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ -}; - -/* define the area offsets */ -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, - {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, -}; diff --git a/board/esg/ima3-mx53/Kconfig b/board/esg/ima3-mx53/Kconfig deleted file mode 100644 index d73238f9a9..0000000000 --- a/board/esg/ima3-mx53/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_IMA3_MX53 - -config SYS_BOARD - default "ima3-mx53" - -config SYS_VENDOR - default "esg" - -config SYS_SOC - default "mx5" - -config SYS_CONFIG_NAME - default "ima3-mx53" - -endif diff --git a/board/esg/ima3-mx53/MAINTAINERS b/board/esg/ima3-mx53/MAINTAINERS deleted file mode 100644 index 96de0815c7..0000000000 --- a/board/esg/ima3-mx53/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -IMA3-MX53 BOARD -#M: - -S: Maintained -F: board/esg/ima3-mx53/ -F: include/configs/ima3-mx53.h -F: configs/ima3-mx53_defconfig diff --git a/board/esg/ima3-mx53/Makefile b/board/esg/ima3-mx53/Makefile deleted file mode 100644 index afb8925c74..0000000000 --- a/board/esg/ima3-mx53/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) 2012, Stefano Babic <sbabic@denx.de> -# -# Based on ti/evm/Makefile -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := ima3-mx53.o diff --git a/board/esg/ima3-mx53/ima3-mx53.c b/board/esg/ima3-mx53/ima3-mx53.c deleted file mode 100644 index df758ee6b8..0000000000 --- a/board/esg/ima3-mx53/ima3-mx53.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * (C) Copyright 2012, Stefano Babic <sbabic@denx.de> - * - * (C) Copyright 2010 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/crm_regs.h> -#include <asm/arch/clock.h> -#include <asm/arch/iomux-mx53.h> -#include <asm/errno.h> -#include <netdev.h> -#include <mmc.h> -#include <fsl_esdhc.h> -#include <asm/gpio.h> - -/* NOR flash configuration */ -#define IMA3_MX53_CS0GCR1 (CSEN | DSZ(2)) -#define IMA3_MX53_CS0GCR2 0 -#define IMA3_MX53_CS0RCR1 (RCSN(2) | OEN(1) | RWSC(15)) -#define IMA3_MX53_CS0RCR2 0 -#define IMA3_MX53_CS0WCR1 (WBED1 | WCSN(2) | WEN(1) | WWSC(15)) -#define IMA3_MX53_CS0WCR2 0 - -DECLARE_GLOBAL_DATA_PTR; - -static void weim_nor_settings(void) -{ - struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR; - - writel(IMA3_MX53_CS0GCR1, &weim_regs->cs0gcr1); - writel(IMA3_MX53_CS0GCR2, &weim_regs->cs0gcr2); - writel(IMA3_MX53_CS0RCR1, &weim_regs->cs0rcr1); - writel(IMA3_MX53_CS0RCR2, &weim_regs->cs0rcr2); - writel(IMA3_MX53_CS0WCR1, &weim_regs->cs0wcr1); - writel(IMA3_MX53_CS0WCR2, &weim_regs->cs0wcr2); - writel(0x0, &weim_regs->wcr); - - set_chipselect_size(CS0_128); -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) - -static void setup_iomux_uart(void) -{ - static const iomux_v3_cfg_t uart_pads[] = { - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT13__UART4_RXD_MUX, UART_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT12__UART4_TXD_MUX, UART_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); -} - -static void setup_iomux_fec(void) -{ - static const iomux_v3_cfg_t fec_pads[] = { - NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | - PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), - NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK, - PAD_CTL_HYS | PAD_CTL_PKE), - }; - - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); -} - -#ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg esdhc_cfg = { MMC_SDHC1_BASE_ADDR }; - -int board_mmc_getcd(struct mmc *mmc) -{ - int ret; - - ret = !gpio_get_value(IMX_GPIO_NR(1, 1)); - - return ret; -} - -#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP) -#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ - PAD_CTL_DSE_HIGH) -#define SD_CD_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_HYS | PAD_CTL_PKE) - -int board_mmc_init(bd_t *bis) -{ - static const iomux_v3_cfg_t sd1_pads[] = { - NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_GPIO_1__GPIO1_1, SD_CD_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads)); - gpio_direction_input(IMX_GPIO_NR(1, 1)); - - esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - return fsl_esdhc_initialize(bis, &esdhc_cfg); -} -#endif - -#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP) - -static void setup_iomux_spi(void) -{ - static const iomux_v3_cfg_t spi_pads[] = { - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__ECSPI2_SCLK, SPI_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__ECSPI2_MOSI, SPI_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__ECSPI2_MISO, SPI_PAD_CTRL), - /* SSEL 0 */ - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__GPIO5_29, SPI_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); - gpio_direction_output(IMX_GPIO_NR(5, 29), 1); -} - -int board_early_init_f(void) -{ - /* configure I/O pads */ - setup_iomux_uart(); - setup_iomux_fec(); - - weim_nor_settings(); - - /* configure spi */ - setup_iomux_spi(); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - mxc_set_sata_internal_clock(); - - return 0; -} - -#if defined(CONFIG_RESET_PHY_R) -#include <miiphy.h> - -void reset_phy(void) -{ - unsigned short reg; - - /* reset the phy */ - miiphy_reset("FEC", CONFIG_PHY_ADDR); - - /* set hard link to 100Mbit, full-duplex */ - miiphy_read("FEC", CONFIG_PHY_ADDR, MII_BMCR, ®); - reg &= ~BMCR_ANENABLE; - reg |= (BMCR_SPEED100 | BMCR_FULLDPLX); - miiphy_write("FEC", CONFIG_PHY_ADDR, MII_BMCR, reg); - - miiphy_read("FEC", CONFIG_PHY_ADDR, 0x16, ®); - reg |= (1 << 5); - miiphy_write("FEC", CONFIG_PHY_ADDR, 0x16, reg); -} -#endif - -int checkboard(void) -{ - puts("Board: IMA3_MX53\n"); - - return 0; -} diff --git a/board/esg/ima3-mx53/imximage.cfg b/board/esg/ima3-mx53/imximage.cfg deleted file mode 100644 index 324a90e902..0000000000 --- a/board/esg/ima3-mx53/imximage.cfg +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2012 - * Stefano Babic DENX Software Engineering sbabic@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* image version */ -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM nor - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -/* IOMUX for RAM only */ -DATA 4 0x53fa8554 0x300020 -DATA 4 0x53fa8560 0x300020 -DATA 4 0x53fa8594 0x300020 -DATA 4 0x53fa8584 0x300020 -DATA 4 0x53fa8558 0x300040 -DATA 4 0x53fa8568 0x300040 -DATA 4 0x53fa8590 0x300040 -DATA 4 0x53fa857c 0x300040 -DATA 4 0x53fa8564 0x300040 -DATA 4 0x53fa8580 0x300040 -DATA 4 0x53fa8570 0x300220 -DATA 4 0x53fa8578 0x300220 -DATA 4 0x53fa872c 0x300000 -DATA 4 0x53fa8728 0x300000 -DATA 4 0x53fa871c 0x300000 -DATA 4 0x53fa8718 0x300000 -DATA 4 0x53fa8574 0x300020 -DATA 4 0x53fa8588 0x300020 -DATA 4 0x53fa855c 0x0 -DATA 4 0x53fa858c 0x0 -DATA 4 0x53fa856c 0x300040 -DATA 4 0x53fa86f0 0x300000 -DATA 4 0x53fa8720 0x300000 -DATA 4 0x53fa86fc 0x0 -DATA 4 0x53fa86f4 0x0 -DATA 4 0x53fa8714 0x0 -DATA 4 0x53fa8724 0x4000000 - -/* DDR RAM */ -DATA 4 0x63fd9088 0x40404040 -DATA 4 0x63fd9090 0x40404040 -DATA 4 0x63fd907C 0x01420143 -DATA 4 0x63fd9080 0x01450146 -DATA 4 0x63fd9018 0x00111740 -DATA 4 0x63fd9000 0x84190000 - -/* esdcfgX */ -DATA 4 0x63fd900C 0x9f5152e3 -DATA 4 0x63fd9010 0xb68e8a63 -DATA 4 0x63fd9014 0x01ff00db - -/* Read/Write command delay */ -DATA 4 0x63fd902c 0x000026d2 - -/* Out of reset delays */ -DATA 4 0x63fd9030 0x00ff0e21 - -/* ESDCTL ODT timing control */ -DATA 4 0x63fd9008 0x12273030 - -/* ESDCTL power down control */ -DATA 4 0x63fd9004 0x0002002d - -/* Set registers in DDR memory chips */ -DATA 4 0x63fd901c 0x00008032 -DATA 4 0x63fd901c 0x00008033 -DATA 4 0x63fd901c 0x00028031 -DATA 4 0x63fd901c 0x052080b0 -DATA 4 0x63fd901c 0x04008040 - -/* ESDCTL refresh control */ -DATA 4 0x63fd9020 0x00005800 - -/* PHY ZQ HW control */ -DATA 4 0x63fd9040 0x05380003 - -/* PHY ODT control */ -DATA 4 0x63fd9058 0x00022222 - -/* start DDR3 */ -DATA 4 0x63fd901c 0x00000000 diff --git a/board/eukrea/cpu9260/Kconfig b/board/eukrea/cpu9260/Kconfig deleted file mode 100644 index 90d2124557..0000000000 --- a/board/eukrea/cpu9260/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_CPU9260 - -config SYS_BOARD - default "cpu9260" - -config SYS_VENDOR - default "eukrea" - -config SYS_CONFIG_NAME - default "cpu9260" - -endif diff --git a/board/eukrea/cpu9260/MAINTAINERS b/board/eukrea/cpu9260/MAINTAINERS deleted file mode 100644 index fb5aee80d5..0000000000 --- a/board/eukrea/cpu9260/MAINTAINERS +++ /dev/null @@ -1,13 +0,0 @@ -CPU9260 BOARD -M: Eric Benard <eric@eukrea.com> -S: Maintained -F: board/eukrea/cpu9260/ -F: include/configs/cpu9260.h -F: configs/cpu9260_defconfig -F: configs/cpu9260_128M_defconfig -F: configs/cpu9260_nand_defconfig -F: configs/cpu9260_nand_128M_defconfig -F: configs/cpu9G20_defconfig -F: configs/cpu9G20_128M_defconfig -F: configs/cpu9G20_nand_defconfig -F: configs/cpu9G20_nand_128M_defconfig diff --git a/board/eukrea/cpu9260/Makefile b/board/eukrea/cpu9260/Makefile deleted file mode 100644 index e34792ac42..0000000000 --- a/board/eukrea/cpu9260/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop <stelian@popies.net -# Lead Tech Design <www.leadtechdesign.com> -# Ilko Iliev <www.ronetix.at> -# -# (C) Copyright 2009 -# Eric Benard <eric@eukrea.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += cpu9260.o -obj-y += led.o diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c deleted file mode 100644 index 01ecccb8c9..0000000000 --- a/board/eukrea/cpu9260/cpu9260.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * Ilko Iliev <www.ronetix.at> - * - * (C) Copyright 2009-2011 - * Eric Benard <eric@eukrea.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/arch/at91sam9260.h> -#include <asm/arch/at91sam9_smc.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_matrix.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/clk.h> -#include <asm/arch/hardware.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include <net.h> -#endif -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ - -#ifdef CONFIG_CMD_NAND -static void cpu9260_nand_hw_init(void) -{ - unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC; - at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - /* Enable CS3 */ - csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A; - writel(csa, &matrix->csa); - - /* Configure SMC CS3 for NAND/SmartMedia */ -#if defined(CONFIG_CPU9G20) - writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[3].setup); - writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) | - AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4), - &smc->cs[3].pulse); - writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(3), - &smc->cs[3].mode); -#elif defined(CONFIG_CPU9260) - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[3].setup); - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(2), - &smc->cs[3].mode); -#endif - - writel(1 << ATMEL_ID_PIOC, &pmc->pcer); - - /* Configure RDY/BSY */ - gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); - - /* Enable NandFlash */ - gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} -#endif - -#ifdef CONFIG_MACB -static void cpu9260_macb_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); - - at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1); - - at91_phy_reset(); - - at91_macb_hw_init(); -} -#endif - -int board_early_init_f(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - writel((1 << ATMEL_ID_PIOA) | - (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOC), - &pmc->pcer); - - at91_seriald_hw_init(); - - return 0; -} - - -int board_init(void) -{ - /* arch number of the board */ -#if defined(CONFIG_CPU9G20) - gd->bd->bi_arch_number = MACH_TYPE_CPUAT9G20; -#elif defined(CONFIG_CPU9260) - gd->bd->bi_arch_number = MACH_TYPE_CPUAT9260; -#endif - - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - -#ifdef CONFIG_CMD_NAND - cpu9260_nand_hw_init(); -#endif -#ifdef CONFIG_MACB - cpu9260_macb_hw_init(); -#endif -#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) - status_led_set(STATUS_LED_BOOT, STATUS_LED_ON); -#endif - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0); -#endif - return rc; -} diff --git a/board/eukrea/cpu9260/led.c b/board/eukrea/cpu9260/led.c deleted file mode 100644 index 0cfe0a69fb..0000000000 --- a/board/eukrea/cpu9260/led.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (c) 2009 Wind River Systems, Inc. - * Tom Rix <Tom.Rix@windriver.com> - * (C) Copyright 2009 - * Eric Benard <eric@eukrea.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <status_led.h> -#include <asm/arch/at91sam9260.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> -#include <asm/io.h> - -static unsigned int saved_state[4] = {STATUS_LED_OFF, STATUS_LED_OFF, - STATUS_LED_OFF, STATUS_LED_OFF}; - -void coloured_LED_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - /* Enable clock */ - writel(1 << ATMEL_ID_PIOC, &pmc->pcer); - - at91_set_pio_output(CONFIG_RED_LED, 1); - at91_set_pio_output(CONFIG_GREEN_LED, 1); - at91_set_pio_output(CONFIG_YELLOW_LED, 1); - at91_set_pio_output(CONFIG_BLUE_LED, 1); - - at91_set_pio_value(CONFIG_RED_LED, 1); - at91_set_pio_value(CONFIG_GREEN_LED, 1); - at91_set_pio_value(CONFIG_YELLOW_LED, 1); - at91_set_pio_value(CONFIG_BLUE_LED, 1); -} - -void red_led_off(void) -{ - at91_set_pio_value(CONFIG_RED_LED, 1); - saved_state[STATUS_LED_RED] = STATUS_LED_OFF; -} - -void green_led_off(void) -{ - at91_set_pio_value(CONFIG_GREEN_LED, 1); - saved_state[STATUS_LED_GREEN] = STATUS_LED_OFF; -} - -void yellow_led_off(void) -{ - at91_set_pio_value(CONFIG_YELLOW_LED, 1); - saved_state[STATUS_LED_YELLOW] = STATUS_LED_OFF; -} - -void blue_led_off(void) -{ - at91_set_pio_value(CONFIG_BLUE_LED, 1); - saved_state[STATUS_LED_BLUE] = STATUS_LED_OFF; -} - -void red_led_on(void) -{ - at91_set_pio_value(CONFIG_RED_LED, 0); - saved_state[STATUS_LED_RED] = STATUS_LED_ON; -} - -void green_led_on(void) -{ - at91_set_pio_value(CONFIG_GREEN_LED, 0); - saved_state[STATUS_LED_GREEN] = STATUS_LED_ON; -} - -void yellow_led_on(void) -{ - at91_set_pio_value(CONFIG_YELLOW_LED, 0); - saved_state[STATUS_LED_YELLOW] = STATUS_LED_ON; -} - -void blue_led_on(void) -{ - at91_set_pio_value(CONFIG_BLUE_LED, 0); - saved_state[STATUS_LED_BLUE] = STATUS_LED_ON; -} - -void __led_init(led_id_t mask, int state) -{ - __led_set(mask, state); -} - -void __led_toggle(led_id_t mask) -{ - if (STATUS_LED_BLUE == mask) { - if (STATUS_LED_ON == saved_state[STATUS_LED_BLUE]) - blue_led_off(); - else - blue_led_on(); - } else if (STATUS_LED_RED == mask) { - if (STATUS_LED_ON == saved_state[STATUS_LED_RED]) - red_led_off(); - else - red_led_on(); - } else if (STATUS_LED_GREEN == mask) { - if (STATUS_LED_ON == saved_state[STATUS_LED_GREEN]) - green_led_off(); - else - green_led_on(); - } else if (STATUS_LED_YELLOW == mask) { - if (STATUS_LED_ON == saved_state[STATUS_LED_YELLOW]) - yellow_led_off(); - else - yellow_led_on(); - } -} - -void __led_set(led_id_t mask, int state) -{ - if (STATUS_LED_BLUE == mask) { - if (STATUS_LED_ON == state) - blue_led_on(); - else - blue_led_off(); - } else if (STATUS_LED_RED == mask) { - if (STATUS_LED_ON == state) - red_led_on(); - else - red_led_off(); - } else if (STATUS_LED_GREEN == mask) { - if (STATUS_LED_ON == state) - green_led_on(); - else - green_led_off(); - } else if (STATUS_LED_YELLOW == mask) { - if (STATUS_LED_ON == state) - yellow_led_on(); - else - yellow_led_off(); - } -} diff --git a/board/eukrea/cpuat91/Kconfig b/board/eukrea/cpuat91/Kconfig deleted file mode 100644 index 27b005cdf4..0000000000 --- a/board/eukrea/cpuat91/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_CPUAT91 - -config SYS_BOARD - default "cpuat91" - -config SYS_VENDOR - default "eukrea" - -config SYS_CONFIG_NAME - default "cpuat91" - -endif diff --git a/board/eukrea/cpuat91/MAINTAINERS b/board/eukrea/cpuat91/MAINTAINERS deleted file mode 100644 index 1f6bc798dc..0000000000 --- a/board/eukrea/cpuat91/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -CPUAT91 BOARD -M: Eric Benard <eric@eukrea.com> -S: Maintained -F: board/eukrea/cpuat91/ -F: include/configs/cpuat91.h -F: configs/cpuat91_defconfig -F: configs/cpuat91_ram_defconfig diff --git a/board/eukrea/cpuat91/Makefile b/board/eukrea/cpuat91/Makefile deleted file mode 100644 index 59b80c267c..0000000000 --- a/board/eukrea/cpuat91/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. <http://lists.denx.de/mailman/listinfo/u-boot> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := cpuat91.o diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c deleted file mode 100644 index ec0ce0b205..0000000000 --- a/board/eukrea/cpuat91/cpuat91.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * (C) Copyright 2006-2010 Eukrea Electromatique <www.eukrea.com> - * Eric Benard <eric@eukrea.com> - * based on at91rm9200dk.c which is : - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> - -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_common.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init(void) -{ - /* arch number of CPUAT91-Board */ - gd->bd->bi_arch_number = MACH_TYPE_CPUAT91; - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - -int board_early_init_f(void) -{ - at91_seriald_hw_init(); - return 0; -} - - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - return at91emac_register(bis, (u32) ATMEL_BASE_EMAC); -} -#endif - -#ifdef CONFIG_SYS_I2C_SOFT -void i2c_init_board(void) -{ - u32 pin; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - - writel(1 << AT91_ID_PIOA, &pmc->pcer); - pin = AT91_PMX_AA_TWD | AT91_PMX_AA_TWCK; - writel(pin, &pio->pioa.idr); - writel(pin, &pio->pioa.pudr); - writel(pin, &pio->pioa.per); - writel(pin, &pio->pioa.oer); - writel(pin, &pio->pioa.sodr); -} -#endif diff --git a/board/freescale/mx6qarm2/Kconfig b/board/freescale/mx6qarm2/Kconfig index 4af33af185..8ab8b460f9 100644 --- a/board/freescale/mx6qarm2/Kconfig +++ b/board/freescale/mx6qarm2/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "freescale" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "mx6qarm2" diff --git a/board/freescale/mx6qsabreauto/Kconfig b/board/freescale/mx6qsabreauto/Kconfig index cc2a140c52..e579c0f6f8 100644 --- a/board/freescale/mx6qsabreauto/Kconfig +++ b/board/freescale/mx6qsabreauto/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "freescale" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "mx6qsabreauto" diff --git a/board/freescale/mx6qsabreauto/MAINTAINERS b/board/freescale/mx6qsabreauto/MAINTAINERS index fb65ce4123..75a8862ef6 100644 --- a/board/freescale/mx6qsabreauto/MAINTAINERS +++ b/board/freescale/mx6qsabreauto/MAINTAINERS @@ -1,7 +1,9 @@ MX6QSABREAUTO BOARD M: Fabio Estevam <fabio.estevam@freescale.com> +M: Peng Fan <Peng.Fan@freescale.com> S: Maintained F: board/freescale/mx6qsabreauto/ F: include/configs/mx6qsabreauto.h F: configs/mx6dlsabreauto_defconfig F: configs/mx6qsabreauto_defconfig +F: configs/mx6qpsabreauto_defconfig diff --git a/board/freescale/mx6sabresd/Kconfig b/board/freescale/mx6sabresd/Kconfig index fa6ddb2292..e87dea0d7a 100644 --- a/board/freescale/mx6sabresd/Kconfig +++ b/board/freescale/mx6sabresd/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "freescale" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "mx6sabresd" diff --git a/board/freescale/mx6slevk/Kconfig b/board/freescale/mx6slevk/Kconfig index d32da900a3..18482b551e 100644 --- a/board/freescale/mx6slevk/Kconfig +++ b/board/freescale/mx6slevk/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "freescale" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "mx6slevk" diff --git a/board/freescale/mx6slevk/MAINTAINERS b/board/freescale/mx6slevk/MAINTAINERS index 18d31a8d8b..f4e74ba725 100644 --- a/board/freescale/mx6slevk/MAINTAINERS +++ b/board/freescale/mx6slevk/MAINTAINERS @@ -1,7 +1,9 @@ MX6SLEVK BOARD M: Fabio Estevam <fabio.estevam@freescale.com> +M: Peng Fan <Peng.Fan@freescale.com> S: Maintained F: board/freescale/mx6slevk/ F: include/configs/mx6slevk.h F: configs/mx6slevk_defconfig +F: configs/mx6slevk_spl_defconfig F: configs/mx6slevk_spinor_defconfig diff --git a/board/freescale/mx6sxsabresd/Kconfig b/board/freescale/mx6sxsabresd/Kconfig index 940983e932..fcfac0aae4 100644 --- a/board/freescale/mx6sxsabresd/Kconfig +++ b/board/freescale/mx6sxsabresd/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "freescale" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "mx6sxsabresd" diff --git a/board/freescale/mx6ul_14x14_evk/Kconfig b/board/freescale/mx6ul_14x14_evk/Kconfig index 393aca629b..8210cd3cb8 100644 --- a/board/freescale/mx6ul_14x14_evk/Kconfig +++ b/board/freescale/mx6ul_14x14_evk/Kconfig @@ -1,4 +1,4 @@ -if TARGET_MX6UL_14X14_EVK +if TARGET_MX6UL_14X14_EVK || TARGET_MX6UL_9X9_EVK config SYS_BOARD default "mx6ul_14x14_evk" @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "freescale" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "mx6ul_14x14_evk" diff --git a/board/freescale/mx6ul_14x14_evk/MAINTAINERS b/board/freescale/mx6ul_14x14_evk/MAINTAINERS index 611feca106..d5f74b7ff4 100644 --- a/board/freescale/mx6ul_14x14_evk/MAINTAINERS +++ b/board/freescale/mx6ul_14x14_evk/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/freescale/mx6ul_14x14_evk/ F: include/configs/mx6ul_14x14_evk.h F: configs/mx6ul_14x14_evk_defconfig +F: configs/mx6ul_9x9_evk_defconfig diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README new file mode 100644 index 0000000000..d48c7ba20f --- /dev/null +++ b/board/freescale/mx6ul_14x14_evk/README @@ -0,0 +1,32 @@ +How to use U-boot on Freescale MX6UL 14x14 EVK +----------------------------------------------- + +- Build U-boot for MX6UL 14x14 EVK: + +$ make mrproper +$ make mx6ul_14x14_evk_defconfig +$ make + +This will generate the SPL image called SPL and the u-boot.img. + +- Flash the SPL image into the micro SD card: + +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + +- Flash the u-boot.img image into the micro SD card: + +sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Jumper settings: + +SW601: 0 0 1 0 +Sw602: 1 0 + +where 0 means bottom position and 1 means top position (from the +switch label numbers reference). + +- Connect the USB cable between the EVK and the PC for the console. +(The USB console connector is the one close the push buttons) + +- Insert the micro SD card in the board, power it up and U-boot messages should +come up. diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index c09d84e540..8650f350f3 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -23,6 +23,9 @@ #include <linux/sizes.h> #include <mmc.h> #include <netdev.h> +#include <power/pmic.h> +#include <power/pfuze3000_pmic.h> +#include "../common/pfuze.h" #include <usb.h> #include <usb/ehci-fsl.h> @@ -152,53 +155,10 @@ static void iox74lv_init(void) gpio_direction_output(IOX_OE, 1); }; -void iox74lv_set(int index) -{ - int i; - - gpio_direction_output(IOX_OE, 0); - - for (i = 7; i >= 0; i--) { - gpio_direction_output(IOX_SHCP, 0); - - if (i == index) - gpio_direction_output(IOX_SDI, seq[qn_output[i]][0]); - else - gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]); - udelay(500); - gpio_direction_output(IOX_SHCP, 1); - udelay(500); - } - - gpio_direction_output(IOX_STCP, 0); - udelay(500); - /* - * shift register will be output to pins - */ - gpio_direction_output(IOX_STCP, 1); - - for (i = 7; i >= 0; i--) { - gpio_direction_output(IOX_SHCP, 0); - gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]); - udelay(500); - gpio_direction_output(IOX_SHCP, 1); - udelay(500); - } - - gpio_direction_output(IOX_STCP, 0); - udelay(500); - /* - * shift register will be output to pins - */ - gpio_direction_output(IOX_STCP, 1); - - gpio_direction_output(IOX_OE, 1); -}; - #ifdef CONFIG_SYS_I2C_MXC #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1 for PMIC and EEPROM */ -struct i2c_pads_info i2c_pad_info1 = { +static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6_PAD_UART4_TX_DATA__I2C1_SCL | PC, .gpio_mode = MX6_PAD_UART4_TX_DATA__GPIO1_IO28 | PC, @@ -210,11 +170,56 @@ struct i2c_pads_info i2c_pad_info1 = { .gp = IMX_GPIO_NR(1, 29), }, }; + +#ifdef CONFIG_POWER +#define I2C_PMIC 0 +int power_init_board(void) +{ + if (is_mx6ul_9x9_evk()) { + struct pmic *pfuze; + int ret; + unsigned int reg, rev_id; + + ret = power_pfuze3000_init(I2C_PMIC); + if (ret) + return ret; + + pfuze = pmic_get("PFUZE3000"); + ret = pmic_probe(pfuze); + if (ret) + return ret; + + pmic_reg_read(pfuze, PFUZE3000_DEVICEID, ®); + pmic_reg_read(pfuze, PFUZE3000_REVID, &rev_id); + printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", + reg, rev_id); + + /* disable Low Power Mode during standby mode */ + pmic_reg_read(pfuze, PFUZE3000_LDOGCTL, ®); + reg |= 0x1; + pmic_reg_write(pfuze, PFUZE3000_LDOGCTL, reg); + + /* SW1B step ramp up time from 2us to 4us/25mV */ + reg = 0x40; + pmic_reg_write(pfuze, PFUZE3000_SW1BCONF, reg); + + /* SW1B mode to APS/PFM */ + reg = 0xc; + pmic_reg_write(pfuze, PFUZE3000_SW1BMODE, reg); + + /* SW1B standby voltage set to 0.975V */ + reg = 0xb; + pmic_reg_write(pfuze, PFUZE3000_SW1BSTBY, reg); + } + + return 0; +} +#endif #endif int dram_init(void) { - gd->ram_size = PHYS_SDRAM_SIZE; + gd->ram_size = imx_ddr_size(); return 0; } @@ -308,7 +313,7 @@ static iomux_v3_cfg_t const quadspi_pads[] = { MX6_PAD_NAND_DQS__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1), }; -int board_qspi_init(void) +static int board_qspi_init(void) { /* Set the iomux */ imx_iomux_v3_setup_multiple_pads(quadspi_pads, @@ -614,17 +619,24 @@ int board_late_init(void) add_board_boot_modes(board_boot_modes); #endif - return 0; -} +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + setenv("board_name", "EVK"); -u32 get_board_rev(void) -{ - return get_cpu_rev(); + if (is_mx6ul_9x9_evk()) + setenv("board_rev", "9X9"); + else + setenv("board_rev", "14X14"); +#endif + + return 0; } int checkboard(void) { - puts("Board: MX6UL 14x14 EVK\n"); + if (is_mx6ul_9x9_evk()) + puts("Board: MX6UL 9x9 EVK\n"); + else + puts("Board: MX6UL 14x14 EVK\n"); return 0; } @@ -634,7 +646,76 @@ int checkboard(void) #include <spl.h> #include <asm/arch/mx6-ddr.h> -const struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { + +static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = { + .grp_addds = 0x00000030, + .grp_ddrmode_ctl = 0x00020000, + .grp_b0ds = 0x00000030, + .grp_ctlds = 0x00000030, + .grp_b1ds = 0x00000030, + .grp_ddrpke = 0x00000000, + .grp_ddrmode = 0x00020000, +#ifdef CONFIG_TARGET_MX6UL_9X9_EVK + .grp_ddr_type = 0x00080000, +#else + .grp_ddr_type = 0x000c0000, +#endif +}; + +#ifdef CONFIG_TARGET_MX6UL_9X9_EVK +static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { + .dram_dqm0 = 0x00000030, + .dram_dqm1 = 0x00000030, + .dram_ras = 0x00000030, + .dram_cas = 0x00000030, + .dram_odt0 = 0x00000000, + .dram_odt1 = 0x00000000, + .dram_sdba2 = 0x00000000, + .dram_sdclk_0 = 0x00000030, + .dram_sdqs0 = 0x00003030, + .dram_sdqs1 = 0x00003030, + .dram_reset = 0x00000030, +}; + +static struct mx6_mmdc_calibration mx6_mmcd_calib = { + .p0_mpwldectrl0 = 0x00000000, + .p0_mpdgctrl0 = 0x20000000, + .p0_mprddlctl = 0x4040484f, + .p0_mpwrdlctl = 0x40405247, + .mpzqlp2ctl = 0x1b4700c7, +}; + +static struct mx6_lpddr2_cfg mem_ddr = { + .mem_speed = 800, + .density = 2, + .width = 16, + .banks = 4, + .rowaddr = 14, + .coladdr = 10, + .trcd_lp = 1500, + .trppb_lp = 1500, + .trpab_lp = 2000, + .trasmin = 4250, +}; + +struct mx6_ddr_sysinfo ddr_sysinfo = { + .dsize = 0, + .cs_density = 18, + .ncs = 1, + .cs1_mirror = 0, + .walat = 0, + .ralat = 5, + .mif3_mode = 3, + .bi_on = 1, + .rtt_wr = 0, /* LPDDR2 does not need rtt_wr rtt_nom */ + .rtt_nom = 0, + .sde_to_rst = 0, /* LPDDR2 does not need this field */ + .rst_to_cke = 0x10, /* JEDEC value for LPDDR2: 200us */ + .ddr_type = DDR_TYPE_LPDDR2, +}; + +#else +static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { .dram_dqm0 = 0x00000030, .dram_dqm1 = 0x00000030, .dram_ras = 0x00000030, @@ -648,24 +729,29 @@ const struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { .dram_reset = 0x00000030, }; -const struct mx6ul_iomux_grp_regs mx6_grp_ioregs = { - .grp_addds = 0x00000030, - .grp_ddrmode_ctl = 0x00020000, - .grp_b0ds = 0x00000030, - .grp_ctlds = 0x00000030, - .grp_b1ds = 0x00000030, - .grp_ddrpke = 0x00000000, - .grp_ddrmode = 0x00020000, - .grp_ddr_type = 0x000c0000, -}; - -const struct mx6_mmdc_calibration mx6_mmcd_calib = { +static struct mx6_mmdc_calibration mx6_mmcd_calib = { .p0_mpwldectrl0 = 0x00070007, .p0_mpdgctrl0 = 0x41490145, .p0_mprddlctl = 0x40404546, .p0_mpwrdlctl = 0x4040524D, }; +struct mx6_ddr_sysinfo ddr_sysinfo = { + .dsize = 0, + .cs_density = 20, + .ncs = 1, + .cs1_mirror = 0, + .rtt_wr = 2, + .rtt_nom = 1, /* RTT_Nom = RZQ/2 */ + .walat = 1, /* Write additional latency */ + .ralat = 5, /* Read additional latency */ + .mif3_mode = 3, /* Command prediction working mode */ + .bi_on = 1, /* Bank interleaving enabled */ + .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ + .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ + .ddr_type = DDR_TYPE_DDR3, +}; + static struct mx6_ddr3_cfg mem_ddr = { .mem_speed = 800, .density = 4, @@ -678,6 +764,7 @@ static struct mx6_ddr3_cfg mem_ddr = { .trcmin = 4875, .trasmin = 3500, }; +#endif static void ccgr_init(void) { @@ -695,24 +782,8 @@ static void ccgr_init(void) static void spl_dram_init(void) { - struct mx6_ddr_sysinfo sysinfo = { - .dsize = 0, - .cs_density = 20, - .ncs = 1, - .cs1_mirror = 0, - .rtt_wr = 2, - .rtt_nom = 1, /* RTT_Nom = RZQ/2 */ - .walat = 1, /* Write additional latency */ - .ralat = 5, /* Read additional latency */ - .mif3_mode = 3, /* Command prediction working mode */ - .bi_on = 1, /* Bank interleaving enabled */ - .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ - .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ - .ddr_type = DDR_TYPE_DDR3, - }; - mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs); - mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr); + mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr); } void board_init_f(ulong dummy) diff --git a/board/freescale/mx7dsabresd/Kconfig b/board/freescale/mx7dsabresd/Kconfig new file mode 100644 index 0000000000..c6a969ca67 --- /dev/null +++ b/board/freescale/mx7dsabresd/Kconfig @@ -0,0 +1,12 @@ +if TARGET_MX7DSABRESD + +config SYS_BOARD + default "mx7dsabresd" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "mx7dsabresd" + +endif diff --git a/board/freescale/mx7dsabresd/MAINTAINERS b/board/freescale/mx7dsabresd/MAINTAINERS new file mode 100644 index 0000000000..3910ee4524 --- /dev/null +++ b/board/freescale/mx7dsabresd/MAINTAINERS @@ -0,0 +1,6 @@ +MX7DSABRESD BOARD +M: Adrian Alonso <aalonso@freescale.com> +S: Maintained +F: board/freescale/mx7dsabresd +F: include/configs/mx7dsabresd.h +F: configs/mx7dsabresd_defconfig diff --git a/board/freescale/mx7dsabresd/Makefile b/board/freescale/mx7dsabresd/Makefile new file mode 100644 index 0000000000..14336ab854 --- /dev/null +++ b/board/freescale/mx7dsabresd/Makefile @@ -0,0 +1,6 @@ +# (C) Copyright 2015 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mx7dsabresd.o diff --git a/board/freescale/mx7dsabresd/imximage.cfg b/board/freescale/mx7dsabresd/imximage.cfg new file mode 100644 index 0000000000..91b70ee4c8 --- /dev/null +++ b/board/freescale/mx7dsabresd/imximage.cfg @@ -0,0 +1,94 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#define __ASSEMBLY__ +#include <config.h> + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : sd + */ + +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +DATA 4 0x30340004 0x4F400005 + +DATA 4 0x30391000 0x00000002 +DATA 4 0x307a0000 0x01040001 +DATA 4 0x307a01a0 0x80400003 +DATA 4 0x307a01a4 0x00100020 +DATA 4 0x307a01a8 0x80100004 +DATA 4 0x307a0064 0x00400046 +DATA 4 0x307a0490 0x00000001 +DATA 4 0x307a00d0 0x00020083 +DATA 4 0x307a00d4 0x00690000 +DATA 4 0x307a00dc 0x09300004 +DATA 4 0x307a00e0 0x04080000 +DATA 4 0x307a00e4 0x00100004 +DATA 4 0x307a00f4 0x0000033f +DATA 4 0x307a0100 0x09081109 +DATA 4 0x307a0104 0x0007020d +DATA 4 0x307a0108 0x03040407 +DATA 4 0x307a010c 0x00002006 +DATA 4 0x307a0110 0x04020205 +DATA 4 0x307a0114 0x03030202 +DATA 4 0x307a0120 0x00000803 +DATA 4 0x307a0180 0x00800020 +DATA 4 0x307a0184 0x02000100 +DATA 4 0x307a0190 0x02098204 +DATA 4 0x307a0194 0x00030303 +DATA 4 0x307a0200 0x00000016 +DATA 4 0x307a0204 0x00171717 +DATA 4 0x307a0214 0x04040404 +DATA 4 0x307a0218 0x0f040404 +DATA 4 0x307a0240 0x06000604 +DATA 4 0x307a0244 0x00000001 +DATA 4 0x30391000 0x00000000 +DATA 4 0x30790000 0x17420f40 +DATA 4 0x30790004 0x10210100 +DATA 4 0x30790010 0x00060807 +DATA 4 0x307900b0 0x1010007e +DATA 4 0x3079009c 0x00000d6e +DATA 4 0x30790020 0x08080808 +DATA 4 0x30790030 0x08080808 +DATA 4 0x30790050 0x01000010 +DATA 4 0x30790050 0x00000010 + +DATA 4 0x307900c0 0x0e407304 +DATA 4 0x307900c0 0x0e447304 +DATA 4 0x307900c0 0x0e447306 + +CHECK_BITS_SET 4 0x307900c4 0x1 + +DATA 4 0x307900c0 0x0e447304 +DATA 4 0x307900c0 0x0e407304 + +DATA 4 0x30384130 0x00000000 +DATA 4 0x30340020 0x00000178 +DATA 4 0x30384130 0x00000002 +DATA 4 0x30790018 0x0000000f + +CHECK_BITS_SET 4 0x307a0004 0x1 diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c new file mode 100644 index 0000000000..ee9890b599 --- /dev/null +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -0,0 +1,507 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mx7-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/io.h> +#include <linux/sizes.h> +#include <common.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <miiphy.h> +#include <netdev.h> +#include <power/pmic.h> +#include <power/pfuze3000_pmic.h> +#include "../common/pfuze.h" +#include <i2c.h> +#include <asm/imx-common/mxc_i2c.h> +#include <asm/arch/crm_regs.h> +#include <usb/ehci-fsl.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ + PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ + PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) + +#define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) +#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM) + +#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) + +#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ + PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM) + +#ifdef CONFIG_SYS_I2C_MXC +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) +/* I2C1 for PMIC */ +static struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = MX7D_PAD_I2C1_SCL__I2C1_SCL | PC, + .gpio_mode = MX7D_PAD_I2C1_SCL__GPIO4_IO8 | PC, + .gp = IMX_GPIO_NR(4, 8), + }, + .sda = { + .i2c_mode = MX7D_PAD_I2C1_SDA__I2C1_SDA | PC, + .gpio_mode = MX7D_PAD_I2C1_SDA__GPIO4_IO9 | PC, + .gp = IMX_GPIO_NR(4, 9), + }, +}; +#endif + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_SIZE; + + return 0; +} + +static iomux_v3_cfg_t const wdog_pads[] = { + MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const uart1_pads[] = { + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc1_pads[] = { + MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + + MX7D_PAD_SD1_CD_B__GPIO5_IO0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc3_emmc_pads[] = { + MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX7D_PAD_SD3_STROBE__SD3_STROBE | MUX_PAD_CTRL(USDHC_PAD_CTRL), + + MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +#define IOX_SDI IMX_GPIO_NR(1, 9) +#define IOX_STCP IMX_GPIO_NR(1, 12) +#define IOX_SHCP IMX_GPIO_NR(1, 13) + +static iomux_v3_cfg_t const iox_pads[] = { + /* IOX_SDI */ + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* IOX_STCP */ + MX7D_PAD_GPIO1_IO12__GPIO1_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* IOX_SHCP */ + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +/* + * PCIE_DIS_B --> Q0 + * PCIE_RST_B --> Q1 + * HDMI_RST_B --> Q2 + * PERI_RST_B --> Q3 + * SENSOR_RST_B --> Q4 + * ENET_RST_B --> Q5 + * PERI_3V3_EN --> Q6 + * LCD_PWR_EN --> Q7 + */ +enum qn { + PCIE_DIS_B, + PCIE_RST_B, + HDMI_RST_B, + PERI_RST_B, + SENSOR_RST_B, + ENET_RST_B, + PERI_3V3_EN, + LCD_PWR_EN, +}; + +enum qn_func { + qn_reset, + qn_enable, + qn_disable, +}; + +enum qn_level { + qn_low = 0, + qn_high = 1, +}; + +static enum qn_level seq[3][2] = { + {0, 1}, {1, 1}, {0, 0} +}; + +static enum qn_func qn_output[8] = { + qn_disable, qn_reset, qn_reset, qn_reset, qn_reset, qn_reset, qn_enable, + qn_enable +}; + +static void iox74lv_init(void) +{ + int i; + + for (i = 7; i >= 0; i--) { + gpio_direction_output(IOX_SHCP, 0); + gpio_direction_output(IOX_SDI, seq[qn_output[i]][0]); + udelay(500); + gpio_direction_output(IOX_SHCP, 1); + udelay(500); + } + + gpio_direction_output(IOX_STCP, 0); + udelay(500); + /* + * shift register will be output to pins + */ + gpio_direction_output(IOX_STCP, 1); + + for (i = 7; i >= 0; i--) { + gpio_direction_output(IOX_SHCP, 0); + gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]); + udelay(500); + gpio_direction_output(IOX_SHCP, 1); + udelay(500); + } + gpio_direction_output(IOX_STCP, 0); + udelay(500); + /* + * shift register will be output to pins + */ + gpio_direction_output(IOX_STCP, 1); +}; + +#ifdef CONFIG_FEC_MXC +static iomux_v3_cfg_t const fec1_pads[] = { + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX7D_PAD_GPIO1_IO10__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), + MX7D_PAD_GPIO1_IO11__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), +}; + +static void setup_iomux_fec(void) +{ + imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); +} +#endif + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +#ifdef CONFIG_FSL_ESDHC + +#define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0) +#define USDHC1_PWR_GPIO IMX_GPIO_NR(5, 2) +#define USDHC3_PWR_GPIO IMX_GPIO_NR(6, 11) + +static struct fsl_esdhc_cfg usdhc_cfg[3] = { + {USDHC1_BASE_ADDR, 0, 4}, + {USDHC3_BASE_ADDR}, +}; + +static int mmc_get_env_devno(void) +{ + struct bootrom_sw_info **p = + (struct bootrom_sw_info **)ROM_SW_INFO_ADDR; + + u8 boot_type = (*p)->boot_dev_type; + u8 dev_no = (*p)->boot_dev_instance; + + /* If not boot from sd/mmc, use default value */ + if ((boot_type != BOOT_TYPE_SD) && (boot_type != BOOT_TYPE_MMC)) + return CONFIG_SYS_MMC_ENV_DEV; + + if (dev_no == 2) + dev_no--; + + return dev_no; +} + +static int mmc_map_to_kernel_blk(int dev_no) +{ + if (dev_no == 1) + dev_no++; + + return dev_no; +} + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = !gpio_get_value(USDHC1_CD_GPIO); + break; + case USDHC3_BASE_ADDR: + ret = 1; /* Assume uSDHC3 emmc is always present */ + break; + } + + return ret; +} + +int board_mmc_init(bd_t *bis) +{ + int i, ret; + /* + * According to the board_mmc_init() the following map is done: + * (U-boot device node) (Physical Port) + * mmc0 USDHC1 + * mmc2 USDHC3 (eMMC) + */ + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); + gpio_request(USDHC1_CD_GPIO, "usdhc1_cd"); + gpio_direction_input(USDHC1_CD_GPIO); + gpio_request(USDHC1_PWR_GPIO, "usdhc1_pwr"); + gpio_direction_output(USDHC1_PWR_GPIO, 0); + udelay(500); + gpio_direction_output(USDHC1_PWR_GPIO, 1); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc3_emmc_pads, ARRAY_SIZE(usdhc3_emmc_pads)); + gpio_request(USDHC3_PWR_GPIO, "usdhc3_pwr"); + gpio_direction_output(USDHC3_PWR_GPIO, 0); + udelay(500); + gpio_direction_output(USDHC3_PWR_GPIO, 1); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) than supported by the board\n", i + 1); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) + return ret; + } + + return 0; +} + +static int check_mmc_autodetect(void) +{ + char *autodetect_str = getenv("mmcautodetect"); + + if ((autodetect_str != NULL) && + (strcmp(autodetect_str, "yes") == 0)) { + return 1; + } + + return 0; +} + +static void mmc_late_init(void) +{ + char cmd[32]; + char mmcblk[32]; + u32 dev_no = mmc_get_env_devno(); + + if (!check_mmc_autodetect()) + return; + + setenv_ulong("mmcdev", dev_no); + + /* Set mmcblk env */ + sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", + mmc_map_to_kernel_blk(dev_no)); + setenv("mmcroot", mmcblk); + + sprintf(cmd, "mmc dev %d", dev_no); + run_command(cmd, 0); +} + +#endif + +#ifdef CONFIG_FEC_MXC +int board_eth_init(bd_t *bis) +{ + int ret; + + setup_iomux_fec(); + + ret = fecmxc_initialize_multi(bis, 0, + CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); + if (ret) + printf("FEC1 MXC: %s:failed\n", __func__); + + return ret; +} + +static int setup_fec(void) +{ + struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs + = (struct iomuxc_gpr_base_regs *) IOMUXC_GPR_BASE_ADDR; + + /* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/ + clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], + (IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK | + IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0); + + return set_clk_enet(ENET_125MHz); +} + + +int board_phy_config(struct phy_device *phydev) +{ + /* enable rgmii rxc skew and phy mode select to RGMII copper */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x21); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x7ea8); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x2f); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x71b7); + + if (phydev->drv->config) + phydev->drv->config(phydev); + return 0; +} +#endif + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + imx_iomux_v3_setup_multiple_pads(iox_pads, ARRAY_SIZE(iox_pads)); + + iox74lv_init(); + +#ifdef CONFIG_FEC_MXC + setup_fec(); +#endif + + return 0; +} + +#ifdef CONFIG_POWER +#define I2C_PMIC 0 +int power_init_board(void) +{ + struct pmic *p; + int ret; + unsigned int reg, rev_id; + + ret = power_pfuze3000_init(I2C_PMIC); + if (ret) + return ret; + + p = pmic_get("PFUZE3000"); + ret = pmic_probe(p); + if (ret) + return ret; + + pmic_reg_read(p, PFUZE3000_DEVICEID, ®); + pmic_reg_read(p, PFUZE3000_REVID, &rev_id); + printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id); + + /* disable Low Power Mode during standby mode */ + pmic_reg_read(p, PFUZE3000_LDOGCTL, ®); + reg |= 0x1; + pmic_reg_write(p, PFUZE3000_LDOGCTL, reg); + + return 0; +} +#endif + +int board_late_init(void) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + +#ifdef CONFIG_ENV_IS_IN_MMC + mmc_late_init(); +#endif + + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); + + set_wdog_reset(wdog); + + /* + * Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4), + * since we use PMIC_PWRON to reset the board. + */ + clrsetbits_le16(&wdog->wcr, 0, 0x10); + + return 0; +} + +int checkboard(void) +{ + puts("Board: i.MX7D SABRESD\n"); + + return 0; +} + +#ifdef CONFIG_USB_EHCI_MX7 +static iomux_v3_cfg_t const usb_otg1_pads[] = { + MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usb_otg2_pads[] = { + MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +int board_ehci_hcd_init(int port) +{ + switch (port) { + case 0: + imx_iomux_v3_setup_multiple_pads(usb_otg1_pads, + ARRAY_SIZE(usb_otg1_pads)); + break; + case 1: + imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, + ARRAY_SIZE(usb_otg2_pads)); + break; + default: + printf("MXC USB port %d not yet supported\n", port); + return -EINVAL; + } + return 0; +} +#endif diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c index 4160acdcc9..78349317e0 100644 --- a/board/freescale/vf610twr/vf610twr.c +++ b/board/freescale/vf610twr/vf610twr.c @@ -28,63 +28,117 @@ DECLARE_GLOBAL_DATA_PTR; #define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \ PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE) +static struct ddrmc_cr_setting vf610twr_cr_settings[] = { + /* levelling */ + { DDRMC_CR97_WRLVL_EN, 97 }, + { DDRMC_CR98_WRLVL_DL_0(0), 98 }, + { DDRMC_CR99_WRLVL_DL_1(0), 99 }, + { DDRMC_CR102_RDLVL_REG_EN | DDRMC_CR102_RDLVL_GT_REGEN, 102 }, + { DDRMC_CR105_RDLVL_DL_0(0), 105 }, + { DDRMC_CR106_RDLVL_GTDL_0(4), 106 }, + { DDRMC_CR110_RDLVL_DL_1(0) | DDRMC_CR110_RDLVL_GTDL_1(4), 110 }, + /* AXI */ + { DDRMC_CR117_AXI0_W_PRI(0) | DDRMC_CR117_AXI0_R_PRI(0), 117 }, + { DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 }, + { DDRMC_CR120_AXI0_PRI1_RPRI(2) | + DDRMC_CR120_AXI0_PRI0_RPRI(2), 120 }, + { DDRMC_CR121_AXI0_PRI3_RPRI(2) | + DDRMC_CR121_AXI0_PRI2_RPRI(2), 121 }, + { DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) | + DDRMC_CR122_AXI0_PRIRLX(100), 122 }, + { DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) | + DDRMC_CR123_AXI1_PRI2_RPRI(1), 123 }, + { DDRMC_CR124_AXI1_PRIRLX(100), 124 }, + { DDRMC_CR126_PHY_RDLAT(8), 126 }, + { DDRMC_CR132_WRLAT_ADJ(5) | + DDRMC_CR132_RDLAT_ADJ(6), 132 }, + { DDRMC_CR137_PHYCTL_DL(2), 137 }, + { DDRMC_CR138_PHY_WRLV_MXDL(256) | + DDRMC_CR138_PHYDRAM_CK_EN(1), 138 }, + { DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) | + DDRMC_CR139_PHY_WRLV_DLL(3) | + DDRMC_CR139_PHY_WRLV_EN(3), 139 }, + { DDRMC_CR140_PHY_WRLV_WW(64), 140 }, + { DDRMC_CR143_RDLV_GAT_MXDL(1536) | + DDRMC_CR143_RDLV_MXDL(128), 143 }, + { DDRMC_CR144_PHY_RDLVL_RES(4) | DDRMC_CR144_PHY_RDLV_LOAD(7) | + DDRMC_CR144_PHY_RDLV_DLL(3) | + DDRMC_CR144_PHY_RDLV_EN(3), 144 }, + { DDRMC_CR145_PHY_RDLV_RR(64), 145 }, + { DDRMC_CR146_PHY_RDLVL_RESP(64), 146 }, + { DDRMC_CR147_RDLV_RESP_MASK(983040), 147 }, + { DDRMC_CR148_RDLV_GATE_RESP_MASK(983040), 148 }, + { DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(1) | + DDRMC_CR151_RDLVL_DQ_ZERO_CNT(1), 151 }, + + { DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) | + DDRMC_CR154_PAD_ZQ_MODE(1) | + DDRMC_CR154_DDR_SEL_PAD_CONTR(3) | + DDRMC_CR154_PAD_ZQ_HW_FOR(1), 154 }, + { DDRMC_CR155_PAD_ODT_BYTE1(1) | DDRMC_CR155_PAD_ODT_BYTE0(1), 155 }, + { DDRMC_CR158_TWR(6), 158 }, + { DDRMC_CR161_ODT_EN(1) | DDRMC_CR161_TODTH_RD(2) | + DDRMC_CR161_TODTH_WR(2), 161 }, + /* end marker */ + { 0, -1 } +}; + int dram_init(void) { - struct ddrmc_lvl_info lvl = { - .wrlvl_reg_en = 1, - .wrlvl_dl_0 = 0, - .wrlvl_dl_1 = 0, - .rdlvl_gt_reg_en = 1, - .rdlvl_gt_dl_0 = 4, - .rdlvl_gt_dl_1 = 4, - .rdlvl_reg_en = 1, - .rdlvl_dl_0 = 0, - .rdlvl_dl_1 = 0, - }; - static const struct ddr3_jedec_timings timings = { - .tinit = 5, - .trst_pwron = 80000, - .cke_inactive = 200000, - .wrlat = 5, - .caslat_lin = 12, - .trc = 21, - .trrd = 4, - .tccd = 4, - .tfaw = 20, - .trp = 6, - .twtr = 4, - .tras_min = 15, - .tmrd = 4, - .trtp = 4, - .tras_max = 28080, - .tmod = 12, - .tckesr = 4, - .tcke = 3, - .trcd_int = 6, - .tdal = 12, - .tdll = 512, - .trp_ab = 6, - .tref = 3120, - .trfc = 44, - .tpdex = 3, - .txpdll = 10, - .txsnr = 48, - .txsr = 468, - .cksrx = 5, - .cksre = 5, - .zqcl = 256, - .zqinit = 512, - .zqcs = 64, - .ref_per_zq = 64, - .aprebit = 10, - .wlmrd = 40, - .wldqsen = 25, + .tinit = 5, + .trst_pwron = 80000, + .cke_inactive = 200000, + .wrlat = 5, + .caslat_lin = 12, + .trc = 21, + .trrd = 4, + .tccd = 4, + .tbst_int_interval = 0, + .tfaw = 20, + .trp = 6, + .twtr = 4, + .tras_min = 15, + .tmrd = 4, + .trtp = 4, + .tras_max = 28080, + .tmod = 12, + .tckesr = 4, + .tcke = 3, + .trcd_int = 6, + .tras_lockout = 0, + .tdal = 12, + .bstlen = 0, + .tdll = 512, + .trp_ab = 6, + .tref = 3120, + .trfc = 44, + .tref_int = 0, + .tpdex = 3, + .txpdll = 10, + .txsnr = 48, + .txsr = 468, + .cksrx = 5, + .cksre = 5, + .freq_chg_en = 0, + .zqcl = 256, + .zqinit = 512, + .zqcs = 64, + .ref_per_zq = 64, + .zqcs_rotate = 0, + .aprebit = 10, + .cmd_age_cnt = 64, + .age_cnt = 64, + .q_fullness = 7, + .odt_rd_mapcs0 = 0, + .odt_wr_mapcs0 = 1, + .wlmrd = 40, + .wldqsen = 25, }; - ddrmc_setup_iomux(); + ddrmc_setup_iomux(NULL, 0); - ddrmc_ctrl_init_ddr3(&timings, &lvl, 1, 3); + ddrmc_ctrl_init_ddr3(&timings, vf610twr_cr_settings, NULL, 1, 3); gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; diff --git a/board/gateworks/gw_ventana/Kconfig b/board/gateworks/gw_ventana/Kconfig index c233e90c65..ccce98e2ed 100644 --- a/board/gateworks/gw_ventana/Kconfig +++ b/board/gateworks/gw_ventana/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "gateworks" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "gw_ventana" diff --git a/board/genesi/mx51_efikamx/Kconfig b/board/genesi/mx51_efikamx/Kconfig deleted file mode 100644 index 355702a4b6..0000000000 --- a/board/genesi/mx51_efikamx/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_MX51_EFIKAMX - -config SYS_BOARD - default "mx51_efikamx" - -config SYS_VENDOR - default "genesi" - -config SYS_SOC - default "mx5" - -config SYS_CONFIG_NAME - default "mx51_efikamx" - -endif diff --git a/board/genesi/mx51_efikamx/MAINTAINERS b/board/genesi/mx51_efikamx/MAINTAINERS deleted file mode 100644 index f1398c4926..0000000000 --- a/board/genesi/mx51_efikamx/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -MX51_EFIKAMX BOARD -#M: - -S: Maintained -F: board/genesi/mx51_efikamx/ -F: include/configs/mx51_efikamx.h -F: configs/mx51_efikamx_defconfig -F: configs/mx51_efikasb_defconfig diff --git a/board/genesi/mx51_efikamx/Makefile b/board/genesi/mx51_efikamx/Makefile deleted file mode 100644 index 87f5f9ede1..0000000000 --- a/board/genesi/mx51_efikamx/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (C) 2010, Marek Vasut <marek.vasut@gmail.com> -# -# BASED ON: imx51evk -# -# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> -# -# (C) Copyright 2009 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := efikamx.o efikamx-usb.o diff --git a/board/genesi/mx51_efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c deleted file mode 100644 index 9dfd24961a..0000000000 --- a/board/genesi/mx51_efikamx/efikamx-usb.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <usb.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux-mx51.h> -#include <asm/gpio.h> -#include <usb/ehci-fsl.h> -#include <usb/ulpi.h> -#include <errno.h> - -#include "../../../drivers/usb/host/ehci.h" - -/* - * Configure the USB H1 and USB H2 IOMUX - */ -void setup_iomux_usb(void) -{ - static const iomux_v3_cfg_t usb_h1_pads[] = { - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_STP__USBH1_STP, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - }; - - static const iomux_v3_cfg_t usb_pads[] = { - MX51_PAD_EIM_D27__GPIO2_9, /* USB PHY reset */ - MX51_PAD_GPIO1_5__GPIO1_5, /* USB HUB reset */ - NEW_PAD_CTRL(MX51_PAD_EIM_A22__GPIO2_16, 0), /* WIFI /EN */ - NEW_PAD_CTRL(MX51_PAD_EIM_A16__GPIO2_10, 0), /* WIFI RESET */ - NEW_PAD_CTRL(MX51_PAD_EIM_A17__GPIO2_11, 0), /* BT /EN */ - }; - - imx_iomux_v3_setup_multiple_pads(usb_h1_pads, ARRAY_SIZE(usb_h1_pads)); - - if (machine_is_efikasb()) { - static const iomux_v3_cfg_t usb_h2_pads[] = { - MX51_PAD_EIM_A24__USBH2_CLK, - MX51_PAD_EIM_A25__USBH2_DIR, - MX51_PAD_EIM_A26__USBH2_STP, - MX51_PAD_EIM_A27__USBH2_NXT, - MX51_PAD_EIM_D16__USBH2_DATA0, - MX51_PAD_EIM_D17__USBH2_DATA1, - MX51_PAD_EIM_D18__USBH2_DATA2, - MX51_PAD_EIM_D19__USBH2_DATA3, - MX51_PAD_EIM_D20__USBH2_DATA4, - MX51_PAD_EIM_D21__USBH2_DATA5, - MX51_PAD_EIM_D22__USBH2_DATA6, - MX51_PAD_EIM_D23__USBH2_DATA7, - }; - - imx_iomux_v3_setup_multiple_pads(usb_h2_pads, - ARRAY_SIZE(usb_h2_pads)); - } - - imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); -} - -/* - * Enable devices connected to USB BUSes - */ -static void efika_usb_enable_devices(void) -{ - /* Enable Bluetooth */ - gpio_direction_output(IMX_GPIO_NR(2, 11), 0); - udelay(10000); - gpio_set_value(IMX_GPIO_NR(2, 11), 1); - - /* Enable WiFi */ - gpio_direction_output(IMX_GPIO_NR(2, 16), 1); - udelay(10000); - - /* Reset the WiFi chip */ - gpio_direction_output(IMX_GPIO_NR(2, 10), 0); - udelay(10000); - gpio_set_value(IMX_GPIO_NR(2, 10), 1); -} - -/* - * Reset USB HUB (or HUBs on EfikaSB) - */ -static void efika_usb_hub_reset(void) -{ - /* HUB reset */ - gpio_direction_output(IMX_GPIO_NR(1, 5), 1); - udelay(1000); - gpio_set_value(IMX_GPIO_NR(1, 5), 0); - udelay(1000); - gpio_set_value(IMX_GPIO_NR(1, 5), 1); -} - -/* - * Reset USB PHY (or PHYs on EfikaSB) - */ -static void efika_usb_phy_reset(void) -{ - /* SMSC 3317 PHY reset */ - gpio_direction_output(IMX_GPIO_NR(2, 9), 0); - udelay(1000); - gpio_set_value(IMX_GPIO_NR(2, 9), 1); -} - -static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio, - iomux_v3_cfg_t stp_pad_gpio, - iomux_v3_cfg_t stp_pad_usb) -{ - int ret; - struct ulpi_regs *ulpi = (struct ulpi_regs *)0; - struct ulpi_viewport ulpi_vp; - - imx_iomux_v3_setup_pad(stp_pad_gpio); - gpio_direction_output(stp_gpio, 0); - udelay(1000); - gpio_set_value(stp_gpio, 1); - udelay(1000); - - imx_iomux_v3_setup_pad(stp_pad_usb); - udelay(10000); - - ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint; - ulpi_vp.port_num = 0; - - ret = ulpi_init(&ulpi_vp); - if (ret) { - printf("Efika USB ULPI initialization failed\n"); - return; - } - - /* ULPI set flags */ - ulpi_write(&ulpi_vp, &ulpi->otg_ctrl, - ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN | - ULPI_OTG_EXTVBUSIND); - ulpi_write(&ulpi_vp, &ulpi->function_ctrl, - ULPI_FC_FULL_SPEED | ULPI_FC_OPMODE_NORMAL | - ULPI_FC_SUSPENDM); - ulpi_write(&ulpi_vp, &ulpi->iface_ctrl, 0); - - /* Set VBus */ - ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, - ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - - /* - * Set VBusChrg - * - * NOTE: This violates USB specification, but otherwise, USB on Efika - * doesn't work. - */ - ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS); -} - -int board_ehci_hcd_init(int port) -{ - /* Init iMX51 EHCI */ - efika_usb_phy_reset(); - efika_usb_hub_reset(); - efika_usb_enable_devices(); - - return 0; -} - -/* This overrides a weak function */ -void mx5_ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg, - uint32_t *reg) -{ - uint32_t port = OTG_BASE_ADDR + (0x200 * CONFIG_MXC_USB_PORT); - struct usb_ehci *ehci = (struct usb_ehci *)port; - struct ulpi_regs *ulpi = (struct ulpi_regs *)0; - struct ulpi_viewport ulpi_vp; - - ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint; - ulpi_vp.port_num = 0; - - ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS); - - mdelay(50); - - /* terminate the reset */ - *reg = ehci_readl(status_reg); - *reg |= EHCI_PS_PE; -} - -void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) -{ - uint32_t tmp; - - if (port == 0) { - /* Adjust UTMI PHY frequency to 24MHz */ - tmp = readl(OTG_BASE_ADDR + 0x80c); - tmp = (tmp & ~0x3) | 0x01; - writel(tmp, OTG_BASE_ADDR + 0x80c); - } else if (port == 1) { - efika_ehci_init(ehci, IMX_GPIO_NR(1, 27), - MX51_PAD_USBH1_STP__GPIO1_27, - MX51_PAD_USBH1_STP__USBH1_STP); - } else if ((port == 2) && machine_is_efikasb()) { - efika_ehci_init(ehci, IMX_GPIO_NR(2, 20), - MX51_PAD_EIM_A26__GPIO2_20, - MX51_PAD_EIM_A26__USBH2_STP); - } - - if (port) - mdelay(10); -} - -/* - * Ethernet on the Smarttop is on the USB bus. Rather than give an error about - * "CPU Net Initialization Failed", just pass this test since no other settings - * are required. Smartbook doesn't have built-in Ethernet but we will let it - * pass anyway considering someone may have plugged in a USB stick and all - * they need to do is run "usb start". - */ -int board_eth_init(bd_t *bis) -{ - return 0; -} diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c deleted file mode 100644 index 6ba55cd08a..0000000000 --- a/board/genesi/mx51_efikamx/efikamx.c +++ /dev/null @@ -1,509 +0,0 @@ -/* - * Copyright (C) 2009 Freescale Semiconductor, Inc. - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * Copyright (C) 2009-2012 Genesi USA, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/iomux-mx51.h> -#include <asm/gpio.h> -#include <asm/errno.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/crm_regs.h> -#include <asm/arch/clock.h> -#include <asm/imx-common/spi.h> -#include <i2c.h> -#include <mmc.h> -#include <fsl_esdhc.h> -#include <power/pmic.h> -#include <fsl_pmic.h> -#include <mc13892.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Compile-time error checking - */ -#ifndef CONFIG_MXC_SPI -#error "CONFIG_MXC_SPI not set, this is essential for board's operation!" -#endif - -/* - * Board revisions - * - * Note that we get these revisions here for convenience, but we only set - * up for the production model Smarttop (1.3) and Smartbook (2.0). - * - */ -#define EFIKAMX_BOARD_REV_11 0x1 -#define EFIKAMX_BOARD_REV_12 0x2 -#define EFIKAMX_BOARD_REV_13 0x3 -#define EFIKAMX_BOARD_REV_14 0x4 - -#define EFIKASB_BOARD_REV_13 0x1 -#define EFIKASB_BOARD_REV_20 0x2 - -/* - * Board identification - */ -static u32 get_mx_rev(void) -{ - u32 rev = 0; - /* - * Retrieve board ID: - * - * gpio: 16 17 11 - * ============== - * r1.1: 1+ 1 1 - * r1.2: 1 1 0 - * r1.3: 1 0 1 - * r1.4: 1 0 0 - * - * + note: r1.1 does not strap this pin properly so it needs to - * be hacked or ignored. - */ - - /* set to 1 in order to get correct value on board rev 1.1 */ - gpio_direction_output(IMX_GPIO_NR(3, 16), 1); - gpio_direction_input(IMX_GPIO_NR(3, 11)); - gpio_direction_input(IMX_GPIO_NR(3, 16)); - gpio_direction_input(IMX_GPIO_NR(3, 17)); - - rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 16))) << 0; - rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 17))) << 1; - rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 11))) << 2; - - return (~rev & 0x7) + 1; -} - -static iomux_v3_cfg_t const efikasb_revision_pads[] = { - MX51_PAD_EIM_CS3__GPIO2_28, - MX51_PAD_EIM_CS4__GPIO2_29, -}; - -static inline u32 get_sb_rev(void) -{ - u32 rev = 0; - - imx_iomux_v3_setup_multiple_pads(efikasb_revision_pads, - ARRAY_SIZE(efikasb_revision_pads)); - gpio_direction_input(IMX_GPIO_NR(2, 28)); - gpio_direction_input(IMX_GPIO_NR(2, 29)); - - rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 28))) << 0; - rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 29))) << 1; - - return rev; -} - -inline uint32_t get_efikamx_rev(void) -{ - if (machine_is_efikamx()) - return get_mx_rev(); - else if (machine_is_efikasb()) - return get_sb_rev(); -} - -u32 get_board_rev(void) -{ - return get_cpu_rev() | (get_efikamx_rev() << 8); -} - -/* - * DRAM initialization - */ -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -/* - * UART configuration - */ -static iomux_v3_cfg_t const efikamx_uart_pads[] = { - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, -}; - -/* - * SPI configuration - */ -static iomux_v3_cfg_t const efikamx_spi_pads[] = { - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_CSPI1_SS0__GPIO4_24, - MX51_PAD_CSPI1_SS1__GPIO4_25, - MX51_PAD_GPIO1_6__GPIO1_6, -}; - -#define EFIKAMX_SPI_SS0 IMX_GPIO_NR(4, 24) -#define EFIKAMX_SPI_SS1 IMX_GPIO_NR(4, 25) -#define EFIKAMX_PMIC_IRQ IMX_GPIO_NR(1, 6) - -/* - * PMIC configuration - */ -#ifdef CONFIG_MXC_SPI -int board_spi_cs_gpio(unsigned bus, unsigned cs) -{ - return (bus == 0 && cs == 1) ? 121 : -1; -} - -static void power_init(void) -{ - unsigned int val; - struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; - struct pmic *p; - int ret; - - ret = pmic_init(CONFIG_FSL_PMIC_BUS); - if (ret) - return; - - p = pmic_get("FSL_PMIC"); - if (!p) - return; - - /* Write needed to Power Gate 2 register */ - pmic_reg_read(p, REG_POWER_MISC, &val); - val &= ~PWGT2SPIEN; - pmic_reg_write(p, REG_POWER_MISC, val); - - /* Externally powered */ - pmic_reg_read(p, REG_CHARGE, &val); - val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB; - pmic_reg_write(p, REG_CHARGE, val); - - /* power up the system first */ - pmic_reg_write(p, REG_POWER_MISC, PWUP); - - /* Set core voltage to 1.1V */ - pmic_reg_read(p, REG_SW_0, &val); - val = (val & ~SWx_VOLT_MASK) | SWx_1_100V; - pmic_reg_write(p, REG_SW_0, val); - - /* Setup VCC (SW2) to 1.25 */ - pmic_reg_read(p, REG_SW_1, &val); - val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; - pmic_reg_write(p, REG_SW_1, val); - - /* Setup 1V2_DIG1 (SW3) to 1.25 */ - pmic_reg_read(p, REG_SW_2, &val); - val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; - pmic_reg_write(p, REG_SW_2, val); - udelay(50); - - /* Raise the core frequency to 800MHz */ - writel(0x0, &mxc_ccm->cacrr); - - /* Set switchers in Auto in NORMAL mode & STANDBY mode */ - /* Setup the switcher mode for SW1 & SW2*/ - pmic_reg_read(p, REG_SW_4, &val); - val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | - (SWMODE_MASK << SWMODE2_SHIFT))); - val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | - (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); - pmic_reg_write(p, REG_SW_4, val); - - /* Setup the switcher mode for SW3 & SW4 */ - pmic_reg_read(p, REG_SW_5, &val); - val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) | - (SWMODE_MASK << SWMODE4_SHIFT))); - val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) | - (SWMODE_AUTO_AUTO << SWMODE4_SHIFT); - pmic_reg_write(p, REG_SW_5, val); - - /* Set VDIG to 1.8V, VGEN3 to 1.8V, VCAM to 2.6V */ - pmic_reg_read(p, REG_SETTING_0, &val); - val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK); - val |= VDIG_1_8 | VGEN3_1_8 | VCAM_2_6; - pmic_reg_write(p, REG_SETTING_0, val); - - /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */ - pmic_reg_read(p, REG_SETTING_1, &val); - val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK); - val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775 | VGEN1_1_2 | VGEN2_3_15; - pmic_reg_write(p, REG_SETTING_1, val); - - /* Enable VGEN1, VGEN2, VDIG, VPLL */ - pmic_reg_read(p, REG_MODE_0, &val); - val |= VGEN1EN | VDIGEN | VGEN2EN | VPLLEN; - pmic_reg_write(p, REG_MODE_0, val); - - /* Configure VGEN3 and VCAM regulators to use external PNP */ - val = VGEN3CONFIG | VCAMCONFIG; - pmic_reg_write(p, REG_MODE_1, val); - udelay(200); - - /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ - val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | - VVIDEOEN | VAUDIOEN | VSDEN; - pmic_reg_write(p, REG_MODE_1, val); - - pmic_reg_read(p, REG_POWER_CTL2, &val); - val |= WDIRESET; - pmic_reg_write(p, REG_POWER_CTL2, val); - - udelay(2500); -} -#else -static inline void power_init(void) { } -#endif - -/* - * MMC configuration - */ -#ifdef CONFIG_FSL_ESDHC - -struct fsl_esdhc_cfg esdhc_cfg[2] = { - {MMC_SDHC1_BASE_ADDR}, - {MMC_SDHC2_BASE_ADDR}, -}; - -static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = { - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - MX51_PAD_GPIO1_1__SD1_WP, -}; - -#define EFIKAMX_SDHC1_WP IMX_GPIO_NR(1, 1) - -static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = { - MX51_PAD_GPIO1_0__SD1_CD, - NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, MX51_ESDHC_PAD_CTRL), -}; - -#define EFIKAMX_SDHC1_CD IMX_GPIO_NR(1, 0) -#define EFIKASB_SDHC1_CD IMX_GPIO_NR(2, 27) - -static iomux_v3_cfg_t const efikasb_sdhc2_pads[] = { - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, - MX51_PAD_GPIO1_7__SD2_WP, - MX51_PAD_GPIO1_8__SD2_CD, -}; - -#define EFIKASB_SDHC2_CD IMX_GPIO_NR(1, 8) -#define EFIKASB_SDHC2_WP IMX_GPIO_NR(1, 7) - -static inline uint32_t efikamx_mmc_getcd(u32 base) -{ - if (base == MMC_SDHC1_BASE_ADDR) - if (machine_is_efikamx()) - return EFIKAMX_SDHC1_CD; - else - return EFIKASB_SDHC1_CD; - else - return EFIKASB_SDHC2_CD; -} - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - uint32_t cd = efikamx_mmc_getcd(cfg->esdhc_base); - int ret = !gpio_get_value(cd); - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ - int ret; - - /* - * All Efika MX boards use eSDHC1 with a common write-protect GPIO - */ - imx_iomux_v3_setup_multiple_pads(efikamx_sdhc1_pads, - ARRAY_SIZE(efikamx_sdhc1_pads)); - gpio_direction_input(EFIKAMX_SDHC1_WP); - - /* - * Smartbook and Smarttop differ on the location of eSDHC1 - * carrier-detect GPIO - */ - if (machine_is_efikamx()) { - imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[0]); - gpio_direction_input(EFIKAMX_SDHC1_CD); - } else if (machine_is_efikasb()) { - imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[1]); - gpio_direction_input(EFIKASB_SDHC1_CD); - } - - esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); - - if (machine_is_efikasb()) { - - imx_iomux_v3_setup_multiple_pads(efikasb_sdhc2_pads, - ARRAY_SIZE(efikasb_sdhc2_pads)); - gpio_direction_input(EFIKASB_SDHC2_CD); - gpio_direction_input(EFIKASB_SDHC2_WP); - if (!ret) - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]); - } - - return ret; -} -#endif - -/* - * PATA - */ -static iomux_v3_cfg_t const efikamx_pata_pads[] = { - MX51_PAD_NANDF_WE_B__PATA_DIOW, - MX51_PAD_NANDF_RE_B__PATA_DIOR, - MX51_PAD_NANDF_ALE__PATA_BUFFER_EN, - MX51_PAD_NANDF_CLE__PATA_RESET_B, - MX51_PAD_NANDF_WP_B__PATA_DMACK, - MX51_PAD_NANDF_RB0__PATA_DMARQ, - MX51_PAD_NANDF_RB1__PATA_IORDY, - MX51_PAD_GPIO_NAND__PATA_INTRQ, - MX51_PAD_NANDF_CS2__PATA_CS_0, - MX51_PAD_NANDF_CS3__PATA_CS_1, - MX51_PAD_NANDF_CS4__PATA_DA_0, - MX51_PAD_NANDF_CS5__PATA_DA_1, - MX51_PAD_NANDF_CS6__PATA_DA_2, - MX51_PAD_NANDF_D15__PATA_DATA15, - MX51_PAD_NANDF_D14__PATA_DATA14, - MX51_PAD_NANDF_D13__PATA_DATA13, - MX51_PAD_NANDF_D12__PATA_DATA12, - MX51_PAD_NANDF_D11__PATA_DATA11, - MX51_PAD_NANDF_D10__PATA_DATA10, - MX51_PAD_NANDF_D9__PATA_DATA9, - MX51_PAD_NANDF_D8__PATA_DATA8, - MX51_PAD_NANDF_D7__PATA_DATA7, - MX51_PAD_NANDF_D6__PATA_DATA6, - MX51_PAD_NANDF_D5__PATA_DATA5, - MX51_PAD_NANDF_D4__PATA_DATA4, - MX51_PAD_NANDF_D3__PATA_DATA3, - MX51_PAD_NANDF_D2__PATA_DATA2, - MX51_PAD_NANDF_D1__PATA_DATA1, - MX51_PAD_NANDF_D0__PATA_DATA0, -}; - -/* - * EHCI USB - */ -#ifdef CONFIG_CMD_USB -extern void setup_iomux_usb(void); -#else -static inline void setup_iomux_usb(void) { } -#endif - -/* - * LED configuration - * - * Smarttop LED pad config is done in the DCD - * - */ -#define EFIKAMX_LED_BLUE IMX_GPIO_NR(3, 13) -#define EFIKAMX_LED_GREEN IMX_GPIO_NR(3, 14) -#define EFIKAMX_LED_RED IMX_GPIO_NR(3, 15) - -static iomux_v3_cfg_t const efikasb_led_pads[] = { - MX51_PAD_GPIO1_3__GPIO1_3, - MX51_PAD_EIM_CS0__GPIO2_25, -}; - -#define EFIKASB_CAPSLOCK_LED IMX_GPIO_NR(2, 25) -#define EFIKASB_MESSAGE_LED IMX_GPIO_NR(1, 3) /* Note: active low */ - -/* - * Board initialization - */ -int board_early_init_f(void) -{ - if (machine_is_efikasb()) { - imx_iomux_v3_setup_multiple_pads(efikasb_led_pads, - ARRAY_SIZE(efikasb_led_pads)); - gpio_direction_output(EFIKASB_CAPSLOCK_LED, 0); - gpio_direction_output(EFIKASB_MESSAGE_LED, 1); - } else if (machine_is_efikamx()) { - /* - * Set up GPIO directions for LEDs. - * IOMUX has been done in the DCD already. - * Turn the red LED on for pre-relocation code. - */ - gpio_direction_output(EFIKAMX_LED_BLUE, 0); - gpio_direction_output(EFIKAMX_LED_GREEN, 0); - gpio_direction_output(EFIKAMX_LED_RED, 1); - } - - /* - * Both these pad configurations for UART and SPI are kind of redundant - * since they are the Power-On Defaults for the i.MX51. But, it seems we - * should make absolutely sure that they are set up correctly. - */ - imx_iomux_v3_setup_multiple_pads(efikamx_uart_pads, - ARRAY_SIZE(efikamx_uart_pads)); - imx_iomux_v3_setup_multiple_pads(efikamx_spi_pads, - ARRAY_SIZE(efikamx_spi_pads)); - - /* not technically required for U-Boot operation but do it anyway. */ - gpio_direction_input(EFIKAMX_PMIC_IRQ); - /* Deselect both CS for now, otherwise NOR doesn't probe properly. */ - gpio_direction_output(EFIKAMX_SPI_SS0, 0); - gpio_direction_output(EFIKAMX_SPI_SS1, 1); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -int board_late_init(void) -{ - if (machine_is_efikamx()) { - /* - * Set up Blue LED for "In U-Boot" status. - * We're all relocated and ready to U-Boot! - */ - gpio_set_value(EFIKAMX_LED_RED, 0); - gpio_set_value(EFIKAMX_LED_GREEN, 0); - gpio_set_value(EFIKAMX_LED_BLUE, 1); - } - - power_init(); - - imx_iomux_v3_setup_multiple_pads(efikamx_pata_pads, - ARRAY_SIZE(efikamx_pata_pads)); - setup_iomux_usb(); - - return 0; -} - -int checkboard(void) -{ - u32 rev = get_efikamx_rev(); - - printf("Board: Genesi Efika MX "); - if (machine_is_efikamx()) - printf("Smarttop (1.%i)\n", rev & 0xf); - else if (machine_is_efikasb()) - printf("Smartbook\n"); - - return 0; -} diff --git a/board/genesi/mx51_efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg deleted file mode 100644 index e2911eb401..0000000000 --- a/board/genesi/mx51_efikamx/imximage_mx.cfg +++ /dev/null @@ -1,118 +0,0 @@ -/* - * Copyright (C) 2009 Pegatron Corporation - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * Copyright (C) 2009-2012 Genesi USA, Inc. - * - * BASED ON: imx51evk - * - * (C) Copyright 2009 - * Stefano Babic DENX Software Engineering sbabic@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM spi - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -/* - * Essential GPIO settings to be done as early as possible - * PCBIDn pad settings are all the defaults except #2 which needs HVE off - */ -DATA 4 0x73fa8134 0x3 # PCBID0 ALT3 GPIO 3_16 -DATA 4 0x73fa8130 0x3 # PCBID1 ALT3 GPIO 3_17 -DATA 4 0x73fa8128 0x3 # PCBID2 ALT3 GPIO 3_11 -DATA 4 0x73fa8504 0xe4 # PCBID2 PAD ~HVE -DATA 4 0x73fa8198 0x3 # LED0 ALT3 GPIO 3_13 -DATA 4 0x73fa81c4 0x3 # LED1 ALT3 GPIO 3_14 -DATA 4 0x73fa81c8 0x3 # LED2 ALT3 GPIO 3_15 - -/* DDR bus IOMUX PAD settings */ -DATA 4 0x73fa850c 0x20c5 # SDODT1 -DATA 4 0x73fa8510 0x20c5 # SDODT0 -DATA 4 0x73fa84ac 0xc5 # SDWE -DATA 4 0x73fa84b0 0xc5 # SDCKE0 -DATA 4 0x73fa84b4 0xc5 # SDCKE1 -DATA 4 0x73fa84cc 0xc5 # DRAM_CS0 -DATA 4 0x73fa84d0 0xc5 # DRAM_CS1 -DATA 4 0x73fa882c 0x2 # DRAM_B4 -DATA 4 0x73fa88a4 0x2 # DRAM_B0 -DATA 4 0x73fa88ac 0x2 # DRAM_B1 -DATA 4 0x73fa88b8 0x2 # DRAM_B2 -DATA 4 0x73fa84d4 0xc5 # DRAM_DQM0 -DATA 4 0x73fa84d8 0xc5 # DRAM_DQM1 -DATA 4 0x73fa84dc 0xc5 # DRAM_DQM2 -DATA 4 0x73fa84e0 0xc5 # DRAM_DQM3 - -/* - * Setting DDR for micron - * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model - * CAS=3 BL=4 - */ -/* ESDCTL_ESDCTL0 */ -DATA 4 0x83fd9000 0x82a20000 -/* ESDCTL_ESDCTL1 */ -DATA 4 0x83fd9008 0x82a20000 -/* ESDCTL_ESDMISC */ -DATA 4 0x83fd9010 0xcaaaf6d0 -/* ESDCTL_ESDCFG0 */ -DATA 4 0x83fd9004 0x3f3574aa -/* ESDCTL_ESDCFG1 */ -DATA 4 0x83fd900c 0x3f3574aa - -/* Init DRAM on CS0 */ -/* ESDCTL_ESDSCR */ -DATA 4 0x83fd9014 0x04008008 -DATA 4 0x83fd9014 0x0000801a -DATA 4 0x83fd9014 0x0000801b -DATA 4 0x83fd9014 0x00448019 -DATA 4 0x83fd9014 0x07328018 -DATA 4 0x83fd9014 0x04008008 -DATA 4 0x83fd9014 0x00008010 -DATA 4 0x83fd9014 0x00008010 -DATA 4 0x83fd9014 0x06328018 -DATA 4 0x83fd9014 0x03808019 -DATA 4 0x83fd9014 0x00408019 -DATA 4 0x83fd9014 0x00008000 - -/* Init DRAM on CS1 */ -DATA 4 0x83fd9014 0x0400800c -DATA 4 0x83fd9014 0x0000801e -DATA 4 0x83fd9014 0x0000801f -DATA 4 0x83fd9014 0x0000801d -DATA 4 0x83fd9014 0x0732801c -DATA 4 0x83fd9014 0x0400800c -DATA 4 0x83fd9014 0x00008014 -DATA 4 0x83fd9014 0x00008014 -DATA 4 0x83fd9014 0x0632801c -DATA 4 0x83fd9014 0x0380801d -DATA 4 0x83fd9014 0x0040801d -DATA 4 0x83fd9014 0x00008004 - -/* Write to CTL0 */ -DATA 4 0x83fd9000 0xb2a20000 -/* Write to CTL1 */ -DATA 4 0x83fd9008 0xb2a20000 -/* ESDMISC */ -DATA 4 0x83fd9010 0x000ad6d0 -/* ESDCTL_ESDCDLYGD */ -DATA 4 0x83fd9034 0x90000000 -DATA 4 0x83fd9014 0x00000000 diff --git a/board/genesi/mx51_efikamx/imximage_sb.cfg b/board/genesi/mx51_efikamx/imximage_sb.cfg deleted file mode 100644 index a67d41b42e..0000000000 --- a/board/genesi/mx51_efikamx/imximage_sb.cfg +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2009 Pegatron Corporation - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * Copyright (C) 2009-2012 Genesi USA, Inc. - * - * BASED ON: imx51evk - * - * (C) Copyright 2009 - * Stefano Babic DENX Software Engineering sbabic@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM spi - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register -*/ -/* DDR bus IOMUX PAD settings */ -DATA 4 0x73fa88a0 0x200 # GRP_INMODE1 -DATA 4 0x73fa850c 0x20c5 # SDODT1 -DATA 4 0x73fa8510 0x20c5 # SDODT0 -DATA 4 0x73fa8848 0x4 # DDR_A1 -DATA 4 0x73fa84b8 0xe7 # DRAM_SDCLK -DATA 4 0x73fa84bc 0x45 # DRAM_SDQS0 -DATA 4 0x73fa84c0 0x45 # DRAM_SDQS1 -DATA 4 0x73fa84c4 0x45 # DRAM_SDQS2 -DATA 4 0x73fa84c8 0x45 # DRAM_SDQS3 -DATA 4 0x73fa8820 0x0 # DDRPKS -DATA 4 0x73fa84ac 0xe5 # SDWE -DATA 4 0x73fa84b0 0xe5 # SDCKE0 -DATA 4 0x73fa84b4 0xe5 # SDCKE1 -DATA 4 0x73fa84cc 0xe5 # DRAM_CS0 -DATA 4 0x73fa84d0 0xe4 # DRAM_CS1 - -/* - * Setting DDR for micron - * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model - * CAS=3 BL=4 - */ -/* ESDCTL_ESDCTL0 */ -DATA 4 0x83fd9000 0x82a20000 -/* ESDCTL_ESDCTL1 */ -DATA 4 0x83fd9008 0x82a20000 -/* ESDCTL_ESDMISC */ -DATA 4 0x83fd9010 0xcaaaf6d0 -/* ESDCTL_ESDCFG0 */ -DATA 4 0x83fd9004 0x333574aa -/* ESDCTL_ESDCFG1 */ -DATA 4 0x83fd900c 0x333574aa - -/* Init DRAM on CS0 */ -/* ESDCTL_ESDSCR */ -DATA 4 0x83fd9014 0x04008008 -DATA 4 0x83fd9014 0x0000801a -DATA 4 0x83fd9014 0x0000801b -DATA 4 0x83fd9014 0x00448019 -DATA 4 0x83fd9014 0x07328018 -DATA 4 0x83fd9014 0x04008008 -DATA 4 0x83fd9014 0x00008010 -DATA 4 0x83fd9014 0x00008010 -DATA 4 0x83fd9014 0x06328018 -DATA 4 0x83fd9014 0x03808019 -DATA 4 0x83fd9014 0x00408019 -DATA 4 0x83fd9014 0x00008000 - -/* Init DRAM on CS1 */ -DATA 4 0x83fd9014 0x0400800c -DATA 4 0x83fd9014 0x0000801e -DATA 4 0x83fd9014 0x0000801f -DATA 4 0x83fd9014 0x0000801d -DATA 4 0x83fd9014 0x0732801c -DATA 4 0x83fd9014 0x0400800c -DATA 4 0x83fd9014 0x00008014 -DATA 4 0x83fd9014 0x00008014 -DATA 4 0x83fd9014 0x0632801c -DATA 4 0x83fd9014 0x0380801d -DATA 4 0x83fd9014 0x0042801d -DATA 4 0x83fd9014 0x00008004 - -/* Write to CTL0 */ -DATA 4 0x83fd9000 0xb2a20000 -/* Write to CTL1 */ -DATA 4 0x83fd9008 0xb2a20000 -/* ESDMISC */ -DATA 4 0x83fd9010 0xcaaaf6d0 -/* ESDCTL_ESDCDLYGD */ -DATA 4 0x83fd9034 0x90000000 -DATA 4 0x83fd9014 0x00000000 diff --git a/board/hale/tt01/Kconfig b/board/hale/tt01/Kconfig deleted file mode 100644 index af9828a4bf..0000000000 --- a/board/hale/tt01/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_TT01 - -config SYS_BOARD - default "tt01" - -config SYS_VENDOR - default "hale" - -config SYS_SOC - default "mx31" - -config SYS_CONFIG_NAME - default "tt01" - -endif diff --git a/board/hale/tt01/MAINTAINERS b/board/hale/tt01/MAINTAINERS deleted file mode 100644 index 2f582be8f3..0000000000 --- a/board/hale/tt01/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -TT01 BOARD -M: Helmut Raiger <helmut.raiger@hale.at> -S: Maintained -F: board/hale/tt01/ -F: include/configs/tt01.h -F: configs/tt01_defconfig diff --git a/board/hale/tt01/Makefile b/board/hale/tt01/Makefile deleted file mode 100644 index e06a040422..0000000000 --- a/board/hale/tt01/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2009 HALE electronic <helmut.raiger@hale.at> -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := tt01.o -obj-y += lowlevel_init.o diff --git a/board/hale/tt01/lowlevel_init.S b/board/hale/tt01/lowlevel_init.S deleted file mode 100644 index 54132a18fb..0000000000 --- a/board/hale/tt01/lowlevel_init.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com> - * (C) Copyright 2011 Helmut Raiger <helmut.raiger@hale.at> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <config.h> -#include <asm/arch/imx-regs.h> -#include <asm/macro.h> - -.globl lowlevel_init -lowlevel_init: - /* Also setup the Peripheral Port Remap register inside the core */ - ldr r0, =ARM_PPMRR /* start from AIPS 2GB region */ - mcr p15, 0, r0, c15, c2, 4 - mov pc, lr diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c deleted file mode 100644 index 011aed0841..0000000000 --- a/board/hale/tt01/tt01.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * (C) Copyright 2011 HALE electronic <helmut.raiger@hale.at> - * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com> - * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <command.h> -#include <power/pmic.h> -#include <fsl_pmic.h> -#include <mc13783.h> -#include <asm/arch/clock.h> -#include <asm/arch/sys_proto.h> -#include <asm/io.h> -#include <errno.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define BOARD_STRING "Board: HALE TT-01" - -/* Clock configuration */ -#define CCM_CCMR_SETUP 0x074B0BF5 - -static void board_setup_clocks(void) -{ - struct clock_control_regs *ccm = (struct clock_control_regs *) CCM_BASE; - volatile int wait = 0x10000; - - writel(CCM_CCMR_SETUP, &ccm->ccmr); - while (wait--) - ; - - writel(CCM_CCMR_SETUP | CCMR_MPE, &ccm->ccmr); - writel((CCM_CCMR_SETUP | CCMR_MPE) & ~CCMR_MDS, &ccm->ccmr); - - /* Set up clock to 532MHz */ - writel(PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | PDR0_PER_PODF(7) | - PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | - PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | - PDR0_MCU_PODF(0), &ccm->pdr0); - writel(PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | PLL_MFN(12), - &ccm->mpctl); - writel(PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1), - &ccm->spctl); -} - -/* DRAM configuration */ - -#define ESDMISC_MDDR_SETUP 0x00000004 -#define ESDMISC_MDDR_RESET_DL 0x0000000c -/* - * decoding magic 0x6ac73a = 0b 0110 1010 1100 0111 0011 1010 below: - * tXP = 11, tWTR = 0, tRP = 10, tMRD = 10 - * tWR = 1, tRAS = 100, tRRD = 01, tCAS = 11 - * tRCD = 011, tRC = 010 - * note: all but tWTR (1), tRC (111) are reset defaults, - * the same values work in the jtag configuration - * - * Bluetechnix setup has 0x75e73a (for 128MB) = - * 0b 0111 0101 1110 0111 0011 1010 - * tXP = 11, tWTR = 1, tRP = 01, tMRD = 01 - * tWR = 1, tRAS = 110, tRRD = 01, tCAS = 11 - * tRCD = 011, tRC = 010 - */ -#define ESDCFG0_MDDR_SETUP 0x006ac73a -#define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2)) -#define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \ - ESDCTL_DSIZ(2) | ESDCTL_BL(1)) -#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE) -#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH) -#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG) -#define ESDCTL_RW ESDCTL_SETTINGS - -static void board_setup_sdram(void) -{ - u32 *pad; - struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR; - - /* - * setup pad control for the controller pins - * no loopback, no pull, no keeper, no open drain, - * standard input, standard drive, slow slew rate - */ - for (pad = (u32 *) IOMUXC_SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B; - pad <= (u32 *) IOMUXC_SW_PAD_CTL_VPG0_VPG1_A0; pad++) - *pad = 0; - - /* set up MX31 DDR Memory Controller */ - writel(ESDMISC_MDDR_SETUP, &esdc->misc); - writel(ESDCFG0_MDDR_SETUP, &esdc->cfg0); - - /* perform DDR init sequence for CSD0 */ - writel(ESDCTL_PRECHARGE, &esdc->ctl0); - writel(0x12344321, CSD0_BASE+0x0f00); - writel(ESDCTL_AUTOREFRESH, &esdc->ctl0); - writel(0x12344321, CSD0_BASE); - writel(0x12344321, CSD0_BASE); - writel(ESDCTL_LOADMODEREG, &esdc->ctl0); - writeb(0xda, CSD0_BASE+0x33); - writeb(0xff, CSD0_BASE+0x1000000); - writel(ESDCTL_RW, &esdc->ctl0); - writel(0xDEADBEEF, CSD0_BASE); - writel(ESDMISC_MDDR_RESET_DL, &esdc->misc); -} - -static void tt01_spi3_hw_init(void) -{ - /* CSPI3 */ - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MISO, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MOSI, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_SCLK, MUX_CTL_FUNC)); - /* CSPI3, SS0 = Atlas */ - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_ALT1)); - - /* start CSPI3 clock (3 = always on except if PLL off) */ - setbits_le32(CCM_CGR0, 3 << 16); -} - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -int board_early_init_f(void) -{ - /* CS4: FPGA incl. network controller */ - struct mxc_weimcs cs4 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 28, 1, 7, 6), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0) - }; - - /* this seems essential, won't start without, but why? */ - writel(IPU_CONF_DI_EN, (u32 *) IPU_CONF); - - board_setup_clocks(); - board_setup_sdram(); - mxc_setup_weimcs(4, &cs4); - - /* Setup UART2 and SPI3 pins */ - mx31_uart2_hw_init(); - tt01_spi3_hw_init(); - - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - return 0; -} - -int board_late_init(void) -{ -#ifdef CONFIG_HW_WATCHDOG - hw_watchdog_init(); -#endif - - return 0; -} - -int checkboard(void) -{ - puts(BOARD_STRING "\n"); - return 0; -} - -#ifdef CONFIG_MXC_MMC -int board_mmc_init(bd_t *bis) -{ - u32 val; - struct pmic *p; - int ret; - - /* - * this is the first driver to use the pmic, so call - * pmic_init() here. board_late_init() is too late for - * the MMC driver. - */ - - ret = pmic_init(I2C_PMIC); - if (ret) - return ret; - - p = pmic_get("FSL_PMIC"); - if (!p) - return -ENODEV; - - /* configure pins for SDHC1 only */ - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CLK, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CMD, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA0, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA1, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA2, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_DATA3, MUX_CTL_FUNC)); - - /* turn on power V_MMC1 */ - if (pmic_reg_read(p, REG_MODE_1, &val) < 0) - pmic_reg_write(p, REG_MODE_1, val | VMMC1EN); - - return mxc_mmc_init(bis); -} -#endif - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} - -#ifdef CONFIG_CONSOLE_EXTRA_INFO -void video_get_info_str(int line_number, char *info) -{ - u32 srev = get_cpu_rev(); - - switch (line_number) { - case 2: - sprintf(info, " CPU : Freescale i.MX31 rev %d.%d%s at %d MHz", - (srev & 0xF0) >> 4, (srev & 0x0F), - ((srev & 0x8000) ? " unknown" : ""), - mxc_get_clock(MXC_ARM_CLK) / 1000000); - break; - case 3: - strcpy(info, " " BOARD_STRING); - break; - default: - info[0] = 0; - } -} -#endif diff --git a/board/hisilicon/hikey/Kconfig b/board/hisilicon/hikey/Kconfig index f7f1055e17..9171502a19 100644 --- a/board/hisilicon/hikey/Kconfig +++ b/board/hisilicon/hikey/Kconfig @@ -12,4 +12,11 @@ config SYS_SOC config SYS_CONFIG_NAME default "hikey" +config CONS_INDEX + int "UART used for console" + range 1 4 + default 4 + help + The hi6220 SoC has 5 UARTs. For example to use UART0 enter 1 here. + endif diff --git a/board/hisilicon/hikey/README b/board/hisilicon/hikey/README index 25c8143069..36adbdbf4b 100644 --- a/board/hisilicon/hikey/README +++ b/board/hisilicon/hikey/README @@ -25,8 +25,12 @@ Currently the u-boot port supports: - Compile u-boot ============== -make CROSS_COMPILE=aarch64-linux-gnu- hikey_config -make CROSS_COMPILE=aarch64-linux-gnu- + > mkdir -p ./aarch64/bin + > cd ./aarch64 + > git clone http://git.denx.de/u-boot.git + > make CROSS_COMPILE=aarch64-linux-gnu- hikey_config + > make CROSS_COMPILE=aarch64-linux-gnu- + > cp u-boot.bin ./aarch64/bin/u-boot-hikey.bin ARM Trusted Firmware (ATF) & l-loader ===================================== @@ -34,27 +38,34 @@ ARM Trusted Firmware (ATF) & l-loader This u-boot port has been tested with l-loader, booting ATF, which then boots u-boot as the bl33.bin executable. +Get the BL30 mcu binary. + > wget -P aarch64/bin https://builds.96boards.org/releases/hikey/linaro/binaries/15.05/mcuimage.bin + 1. Get ATF source code -git clone https://github.com/96boards/arm-trusted-firmware.git + > cd ./aarch64 + > git clone https://github.com/96boards/arm-trusted-firmware.git + > cd ./arm-trusted-firmware -2. Compile ATF I use the makefile here -http://people.linaro.org/~peter.griffin/hikey/hikey-u-boot-release_r1/build-tf.mak +2. Compile ATF, I use the build-tf.mak in the directory with this README, and copy it to ATF directory + > cp ../u-boot/board/hisilicon/hikey/build-tf.mak . + > make -f build-tf.mak build 3. Get l-loader -git clone https://github.com/96boards/l-loader.git - -4. Make sym links to ATF bip / fip binaries -ln -s /home/griffinp/aarch64/bl1-hikey.bin bl1.bin -ln -s /home/griffinp/aarch64/fip-hikey.bin fip.bin + > cd ../ + > git clone https://github.com/96boards/l-loader.git + > cd ./l-loader -arm-linux-gnueabihf-gcc -c -o start.o start.S -arm-linux-gnueabihf-gcc -c -o debug.o debug.S -arm-linux-gnueabihf-ld -Bstatic -Tl-loader.lds -Ttext 0xf9800800 start.o debug.o -o loader -arm-linux-gnueabihf-objcopy -O binary loader temp +4. Make sym links to ATF bl1 / fip binaries + > ln -s ../bin/bl1-hikey.bin bl1.bin + > ln -s ../bin/fip-hikey.bin fip.bin -python gen_loader.py -o l-loader.bin --img_loader=temp --img_bl1=bl1.bin -sudo bash -x generate_ptable.sh -python gen_loader.py -o ptable.img --img_prm_ptable=prm_ptable.img --img_sec_ptable=sec_ptable.img + > arm-linux-gnueabihf-gcc -c -o start.o start.S + > arm-linux-gnueabihf-gcc -c -o debug.o debug.S + > arm-linux-gnueabihf-ld -Bstatic -Tl-loader.lds -Ttext 0xf9800800 start.o debug.o -o loader + > arm-linux-gnueabihf-objcopy -O binary loader temp + > python gen_loader.py -o ../bin/l-loader.bin --img_loader=temp --img_bl1=bl1.bin + > sudo bash -x generate_ptable.sh + > python gen_loader.py -o ../bin/ptable.img --img_prm_ptable=./prm_ptable.img --img_sec_ptable=./sec_ptable.img These instructions are adapted from https://github.com/96boards/documentation/wiki/HiKeyUEFI @@ -62,37 +73,49 @@ https://github.com/96boards/documentation/wiki/HiKeyUEFI FLASHING ======== -1. Connect jumper J2 to go into recovery mode and flash l-loader.bin with - fastboot using the hisi-idt.py utility +1. Connect the second jumper on J15 BOOT SEL, to go into recovery mode and flash l-loader.bin with +fastboot using the hisi-idt.py utility. + + > cd ../ + > git clone https://github.com/96boards/burn-boot.git -> git clone https://github.com/96boards/burn-boot.git -> sudo python /home/griffinp/Software/hikey/burn-boot/hisi-idt.py -d /dev/ttyUSB0 --img1=/tmp/l-loader.bin +The command below assumes HiKey enumerated as the first USB serial port + > sudo ./burn-boot/hisi-idt.py -d /dev/ttyUSB0 --img1=./bin/l-loader.bin -2. Once LED 0 comes on solid, it should be detected as a fastboot device - (on some boards I've found this to be unreliable) +2. Once LED 0 comes on solid, it should be detected as a fastboot device by plugging a USB A to mini B + cable from your PC to the USB OTG port of HiKey (on some boards I've found this to be unreliable). -sudo fastboot devices + > sudo fastboot devices + +0123456789ABCDEF fastboot 3. Flash the images -wget https://builds.96boards.org/releases/hikey/nvme.img -sudo fastboot flash ptable ptable.img -sudo fastboot flash fastboot fip.bin -sudo fastboot flash nvme nvme.img + > wget -P aarch64/bin wget https://builds.96boards.org/releases/hikey/linaro/binaries/latest/nvme.img + > sudo fastboot flash ptable ./bin/ptable.img + > sudo fastboot flash fastboot ./bin/fip-hikey.bin + > sudo fastboot flash nvme ./bin/nvme.img -4. Disconnect jumper J2, and reset the board and you will now (hopefully) +4. Disconnect second jumper on J15 BOOT SEL, and reset the board and you will now (hopefully) have ATF, booting u-boot from eMMC. On 'new' boards I've had to do the flashing twice in the past to avoid an ATF error. + Note: To get USB host working, also disconnect the USB OTG cable used for flashing. Otherwise you + will get 'dwc_otg_core_host_init: Timeout!' errors. + See working boot trace below: - -debug EMMC boot: print init OK debug EMMC boot: send RST_N . debug EMMC boot: start eMMC boot...... load fastboot1! + Switch to aarch64 mode. CPU0 executes at 0xf9801000! + +INFO: BL1: 0xf9810000 - 0xf9817000 [size = 28672] NOTICE: Booting Trusted Firmware -NOTICE: BL1: v1.1(release):a0c0399 -NOTICE: BL1: Built : 13:23:48, May 22 2015 +NOTICE: BL1: v1.1(debug):e8b7174 +NOTICE: BL1: Built : 19:16:44, Sep 8 2015 +INFO: BL1: RAM 0xf9810000 - 0xf9817000 +NOTICE: syspll frequency:1190494208Hz NOTICE: succeed to init lpddr3 rank0 dram phy INFO: lpddr3_freq_init, set ddrc 533mhz INFO: init ddr3 rank0 @@ -101,7 +124,14 @@ INFO: lpddr3_freq_init, set ddrc 800mhz INFO: init ddr3 rank0 INFO: ddr3 rank1 init pass INFO: Elpida DDR +INFO: ddr test value:0xa5a55a5a +INFO: Hisilicon HiKey platform is initialized +INFO: Using FIP +INFO: Loading file 'bl2.bin' at address 0xf9818000 +INFO: File 'bl2.bin' loaded: 0xf9818000 - 0xf9821100 NOTICE: BL1: Booting BL2 +INFO: BL1: BL2 address = 0xf9818000 +INFO: BL1: BL2 spsr = 0x3c5 INFO: [BDID] [fff91c18] midr: 0x410fd033 INFO: [BDID] [fff91c1c] board type: 0 INFO: [BDID] [fff91c20] board id: 0x2b @@ -112,24 +142,78 @@ INFO: acpu_dvfs_set_freq: support freq num is 5 INFO: acpu_dvfs_set_freq: start prof is 0x4 INFO: acpu_dvfs_set_freq: magic is 0x5a5ac5c5 INFO: acpu_dvfs_set_freq: voltage: -INFO: - 0: 0x3a -INFO: - 1: 0x3a -INFO: - 2: 0x4a -INFO: - 3: 0x5b -INFO: - 4: 0x6b -NOTICE: acpu_dvfs_set_freq: set acpu freq success!NOTICE: BL2: v1.1(debug):a0c0399 -NOTICE: BL2: Built : 10:19:28, May 27 2015 +INFO: - 0: 0x49 +INFO: - 1: 0x49 +INFO: - 2: 0x50 +INFO: - 3: 0x60 +INFO: - 4: 0x78 +NOTICE: acpu_dvfs_set_freq: set acpu freq success!NOTICE: BL2: v1.1(debug):e8b7174 +NOTICE: BL2: Built : 19:16:46, Sep 8 2015 INFO: BL2: Loading BL3-0 INFO: Using FIP -WARNING: Failed to access image 'bl30.bin' (-1) -ERROR: Failed to load BL3-0 (-1) -ERROR: Please burn mcu image: -ERROR: sudo fastboot flash mcuimage mcuimage.bin +INFO: Loading file 'bl30.bin' at address 0x1000000 +INFO: Skip reserving memory: 0x1000000 - 0x1023270 +INFO: File 'bl30.bin' loaded: 0x1000000 - 0x1023270 +INFO: bl2_plat_handle_bl30: [1000000] 3a334d43 34313032 2f38302f 30203133 +INFO: bl2_plat_handle_bl30: [10000c8] 0 0 b 0 +INFO: bl2_plat_handle_bl30: [1000190] 17 0 0 0 +INFO: bl2_plat_handle_bl30: [1023260] 0 0 0 0 +INFO: hisi_mcu_load_image: mcu sections 0: +INFO: hisi_mcu_load_image: src = 0x1000200 +INFO: hisi_mcu_load_image: dst = 0xf6000000 +INFO: hisi_mcu_load_image: size = 512 +INFO: hisi_mcu_load_image: [SRC 0x1000200] 0x7600 0x201 0x1eae1 0x1ea71 +INFO: hisi_mcu_load_image: [DST 0xf6000000] 0x7600 0x201 0x1eae1 0x1ea71 +INFO: hisi_mcu_load_image: mcu sections 1: +INFO: hisi_mcu_load_image: src = 0x1000400 +INFO: hisi_mcu_load_image: dst = 0xf6000200 +INFO: hisi_mcu_load_image: size = 27828 +INFO: hisi_mcu_load_image: [SRC 0x1000400] 0xbf00bf00 0x4815b672 0x48154780 0x60014915 +INFO: hisi_mcu_load_image: [DST 0xf6000200] 0xbf00bf00 0x4815b672 0x48154780 0x60014915 +INFO: hisi_mcu_load_image: mcu sections 2: +INFO: hisi_mcu_load_image: src = 0x10070b4 +INFO: hisi_mcu_load_image: dst = 0xf6007200 +INFO: hisi_mcu_load_image: size = 1024 +INFO: hisi_mcu_load_image: [SRC 0x10070b4] 0x55 0x0 0x0 0x0 +INFO: hisi_mcu_load_image: [DST 0xf6007200] 0x55 0x0 0x0 0x0 +INFO: hisi_mcu_load_image: mcu sections 3: +INFO: hisi_mcu_load_image: src = 0x10074b4 +INFO: hisi_mcu_load_image: dst = 0xfff8e000 +INFO: hisi_mcu_load_image: size = 12704 +INFO: hisi_mcu_load_image: [SRC 0x10074b4] 0x55 0x0 0x0 0x0 +INFO: hisi_mcu_load_image: [DST 0xfff8e000] 0x55 0x0 0x0 0x0 +INFO: hisi_mcu_load_image: mcu sections 4: +INFO: hisi_mcu_load_image: src = 0x100a654 +INFO: hisi_mcu_load_image: dst = 0x5e00000 +INFO: hisi_mcu_load_image: size = 82912 +INFO: hisi_mcu_load_image: [SRC 0x100a654] 0x4ff0e92d 0x2cc5f645 0x2600b0ab 0x2c7cf6c0 +INFO: hisi_mcu_load_image: [DST 0x5e00000] 0x4ff0e92d 0x2cc5f645 0x2600b0ab 0x2c7cf6c0 +INFO: hisi_mcu_load_image: mcu sections 5: +INFO: hisi_mcu_load_image: src = 0x101ea34 +INFO: hisi_mcu_load_image: dst = 0x5e143e0 +INFO: hisi_mcu_load_image: size = 12816 +INFO: hisi_mcu_load_image: [SRC 0x101ea34] 0x33323130 0x37363534 0x42413938 0x46454443 +INFO: hisi_mcu_load_image: [DST 0x5e143e0] 0x33323130 0x37363534 0x42413938 0x46454443 +INFO: hisi_mcu_load_image: mcu sections 6: +INFO: hisi_mcu_load_image: src = 0x1021c44 +INFO: hisi_mcu_load_image: dst = 0x5e1c1d0 +INFO: hisi_mcu_load_image: size = 3060 +INFO: hisi_mcu_load_image: [SRC 0x1021c44] 0x0 0x0 0x0 0x0 +INFO: hisi_mcu_load_image: [DST 0x5e1c1d0] 0x0 0x0 0x0 0x0 +INFO: hisi_mcu_load_image: mcu sections 7: +INFO: hisi_mcu_load_image: src = 0x1022838 +INFO: hisi_mcu_load_image: dst = 0x5e1cdc4 +INFO: hisi_mcu_load_image: size = 2616 +INFO: hisi_mcu_load_image: [SRC 0x1022838] 0xf80000a0 0x0 0xf80000ac 0x0 +INFO: hisi_mcu_load_image: [DST 0x5e1cdc4] 0xf80000a0 0x0 0xf80000ac 0x0 +INFO: hisi_mcu_start_run: AO_SC_SYS_CTRL2=0 +INFO: bl2_plat_handle_bl30: mcu pc is 42933301 +INFO: bl2_plat_handle_bl30: AO_SC_PERIPH_CLKSTAT4 is 39018f09 INFO: BL2: TrustZone: protecting 16777216 bytes of memory at 0x3f000000 INFO: BL2: Loading BL3-1 INFO: Using FIP INFO: Loading file 'bl31.bin' at address 0xf9858000 -INFO: File 'bl31.bin' loaded: 0xf9858000 - 0xf9860010 +INFO: File 'bl31.bin' loaded: 0xf9858000 - 0xf9861010 INFO: BL2: Loading BL3-2 INFO: Using FIP WARNING: Failed to access image 'bl32.bin' (-1) @@ -137,24 +221,37 @@ WARNING: Failed to load BL3-2 (-1) INFO: BL2: Loading BL3-3 INFO: Using FIP INFO: Loading file 'bl33.bin' at address 0x35000000 -INFO: File 'bl33.bin' loaded: 0x35000000 - 0x35042938 +INFO: File 'bl33.bin' loaded: 0x35000000 - 0x3504c468 NOTICE: BL1: Booting BL3-1 -NOTICE: BL3-1: v1.1(debug):a0c0399 -NOTICE: BL3-1: Built : 10:19:31, May 27 2015 +INFO: BL1: BL3-1 address = 0xf9858000 +INFO: BL1: BL3-1 spsr = 0x3cd +INFO: BL1: BL3-1 params address = 0xf9821920 +INFO: BL1: BL3-1 plat params address = 0x0 +NOTICE: BL3-1: v1.1(debug):e8b7174 +NOTICE: BL3-1: Built : 19:16:49, Sep 8 2015 INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address = 0x35000000 INFO: BL3-1: Next image spsr = 0x3c9 - -U-Boot 2015.04-00007-g1b3d379-dirty (May 27 2015 - 10:18:16) hikey +U-Boot 2015.10-rc2 (Sep 08 2015 - 20:29:33 +0100)hikey DRAM: 1008 MiB -MMC: sd_card_detect: SD card present +HI6553 PMIC init +MMC: config_sd_carddetect: SD card not present HiKey DWMMC: 0, HiKey DWMMC: 1 +Card did not respond to voltage select! +** Bad device mmc 1 ** +Using default environment + In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 +starting USB... +USB0: Core Release: 3.00a +scanning bus 0 for devices... 2 USB Device(s) found + scanning usb for storage devices... 0 Storage Device(s) found + scanning usb for ethernet devices... 0 Ethernet Device(s) found diff --git a/board/hisilicon/hikey/build-tf.mak b/board/hisilicon/hikey/build-tf.mak new file mode 100644 index 0000000000..cebb34b61b --- /dev/null +++ b/board/hisilicon/hikey/build-tf.mak @@ -0,0 +1,42 @@ +CROSS_COMPILE := aarch64-linux-gnu- +output_dir := $(PWD)/../bin +makejobs := $(shell grep '^processor' /proc/cpuinfo | sort -u | wc -l) +makethreads := $(shell dc -e "$(makejobs) 1 + p") +make_options := GCC49_AARCH64_PREFIX=$CROSS_COMPILE \ + -j$(makethreads) -l$(makejobs) + +BL30_HIKEY := $(output_dir)/mcuimage.bin +BL33_HIKEY := $(output_dir)/u-boot-hikey.bin + +.PHONY: help +help: + @echo "**** Common Makefile ****" + @echo "example:" + @echo "make -f build-tf.mak build" + +.PHONY: have-crosscompiler +have-crosscompiler: + @echo -n "Check that $(CROSS_COMPILE)gcc is available..." + @which $(CROSS_COMPILE)gcc > /dev/null ; \ + if [ ! $$? -eq 0 ] ; then \ + echo "ERROR: cross-compiler $(CROSS_COMPILE)gcc not in PATH=$$PATH!" ; \ + echo "ABORTING." ; \ + exit 1 ; \ + else \ + echo "OK" ;\ + fi + +build: have-crosscompiler FORCE + @echo "Build TF for Hikey..." + rm -rf build/ + CROSS_COMPILE=$(CROSS_COMPILE) \ + make all fip \ + BL30=$(BL30_HIKEY) \ + BL33=$(BL33_HIKEY) \ + DEBUG=1 \ + PLAT=hikey + @echo "Copy resulting binaries..." + cp build/hikey/debug/bl1.bin $(output_dir)/bl1-hikey.bin + cp build/hikey/debug/fip.bin $(output_dir)/fip-hikey.bin + +FORCE: diff --git a/board/hisilicon/hikey/hikey.c b/board/hisilicon/hikey/hikey.c index 8c1271b4a4..c4ae40bfb4 100644 --- a/board/hisilicon/hikey/hikey.c +++ b/board/hisilicon/hikey/hikey.c @@ -6,6 +6,7 @@ */ #include <common.h> #include <dm.h> +#include <dm/platform_data/serial_pl01x.h> #include <errno.h> #include <malloc.h> #include <netdev.h> @@ -69,6 +70,48 @@ U_BOOT_DEVICES(hi6220_gpios) = { DECLARE_GLOBAL_DATA_PTR; +static const struct pl01x_serial_platdata serial_platdata = { +#if CONFIG_CONS_INDEX == 1 + .base = HI6220_UART0_BASE, +#elif CONFIG_CONS_INDEX == 4 + .base = HI6220_UART3_BASE, +#else +#error "Unsuported console index value." +#endif + .type = TYPE_PL011, + .clock = 19200000 +}; + +U_BOOT_DEVICE(hikey_seriala) = { + .name = "serial_pl01x", + .platdata = &serial_platdata, +}; + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_uart_init(void) +{ + switch (CONFIG_CONS_INDEX) { + case 1: + hi6220_pinmux_config(PERIPH_ID_UART0); + break; + case 4: + hi6220_pinmux_config(PERIPH_ID_UART3); + break; + default: + debug("%s: Unsupported UART selected\n", __func__); + return -1; + } + + return 0; +} + +int board_early_init_f(void) +{ + board_uart_init(); + return 0; +} +#endif + struct peri_sc_periph_regs *peri_sc = (struct peri_sc_periph_regs *)HI6220_PERI_BASE; @@ -269,8 +312,6 @@ int misc_init_r(void) int board_init(void) { - gd->flags = 0; - return 0; } diff --git a/board/icpdas/lp8x4x/Kconfig b/board/icpdas/lp8x4x/Kconfig deleted file mode 100644 index 3e87c4016b..0000000000 --- a/board/icpdas/lp8x4x/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_LP8X4X - -config SYS_BOARD - default "lp8x4x" - -config SYS_VENDOR - default "icpdas" - -config SYS_CONFIG_NAME - default "lp8x4x" - -endif diff --git a/board/icpdas/lp8x4x/MAINTAINERS b/board/icpdas/lp8x4x/MAINTAINERS deleted file mode 100644 index 90a82e3fe4..0000000000 --- a/board/icpdas/lp8x4x/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -LP8X4X BOARD -M: Sergey Yanovich <ynvich@gmail.com> -S: Maintained -F: board/icpdas/lp8x4x/ -F: include/configs/lp8x4x.h -F: configs/lp8x4x_defconfig diff --git a/board/icpdas/lp8x4x/Makefile b/board/icpdas/lp8x4x/Makefile deleted file mode 100644 index 88e0606e1e..0000000000 --- a/board/icpdas/lp8x4x/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# ICPDAS LP-8x4x Support -# -# Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := lp8x4x.o diff --git a/board/icpdas/lp8x4x/lp8x4x.c b/board/icpdas/lp8x4x/lp8x4x.c deleted file mode 100644 index a136dc4c37..0000000000 --- a/board/icpdas/lp8x4x/lp8x4x.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * ICP DAS LP-8x4x Support - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * adapted from Voipac PXA270 Support by - * Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/arch/regs-mmc.h> -#include <asm/arch/pxa.h> -#include <netdev.h> -#include <serial.h> -#include <asm/io.h> -#include <usb.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ -int board_init(void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif - -#ifdef CONFIG_CMD_USB -int board_usb_init(int index, enum usb_init_type init) -{ - if (index !=0 || init != USB_INIT_HOST) - return -1; - - writel(readl(CKEN) | CKEN10_USBHOST, CKEN); - - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - udelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR); - - while (readl(UHCHR) & UHCHR_FSBIR) - continue; /* required by checkpath.pl */ - - writel(readl(UHCHR) & ~UHCHR_SSEP0, UHCHR); - writel(readl(UHCRHDA) & ~(0x1000), UHCRHDA); - writel(readl(UHCRHDA) | 0x800, UHCRHDA); - - writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR); - writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE); - - /* Clear any OTG Pin Hold */ - if (readl(PSSR) & PSSR_OTGPH) - writel(readl(PSSR) | PSSR_OTGPH, PSSR); - - writel(readl(UHCRHDA) & ~(0x200), UHCRHDA); - writel(readl(UHCRHDA) | 0x100, UHCRHDA); - - /* Set port power control mask bits, only 3 ports. */ - writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB); - - return 0; -} - -int usb_board_stop(void) -{ - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - udelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCCOMS) | 1, UHCCOMS); - udelay(10); - - writel(readl(UHCHR) | UHCHR_SSEP0 | UHCHR_SSE, UHCHR); - - writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN); - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - if (index !=0 || init != USB_INIT_HOST) - return -1; - - return usb_board_stop(); -} -#endif - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif diff --git a/board/isee/igep0033/MAINTAINERS b/board/isee/igep0033/MAINTAINERS index d162d7792e..bd8a1f2eb4 100644 --- a/board/isee/igep0033/MAINTAINERS +++ b/board/isee/igep0033/MAINTAINERS @@ -1,5 +1,5 @@ IGEP0033 BOARD -M: Enric Balletbo i Serra <eballetbo@iseebcn.com> +M: Enric Balletbo i Serra <eballetbo@gmail.com> S: Maintained F: board/isee/igep0033/ F: include/configs/am335x_igep0033.h diff --git a/board/isee/igep00x0/MAINTAINERS b/board/isee/igep00x0/MAINTAINERS index 3fc2c6cb9a..d355c46882 100644 --- a/board/isee/igep00x0/MAINTAINERS +++ b/board/isee/igep00x0/MAINTAINERS @@ -1,5 +1,5 @@ IGEP00X0 BOARD -M: Enric Balletbo i Serra <eballetbo@iseebcn.com> +M: Enric Balletbo i Serra <eballetbo@gmail.com> S: Maintained F: board/isee/igep00x0/ F: include/configs/omap3_igep00x0.h diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 693fce741a..6eb191c5e0 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -153,10 +153,10 @@ void set_fdt(void) { switch (gd->bd->bi_arch_number) { case MACH_TYPE_IGEP0020: - setenv("dtbfile", "omap3-igep0020.dtb"); + setenv("fdtfile", "omap3-igep0020.dtb"); break; case MACH_TYPE_IGEP0030: - setenv("dtbfile", "omap3-igep0030.dtb"); + setenv("fdtfile", "omap3-igep0030.dtb"); break; } } diff --git a/board/jornada/Kconfig b/board/jornada/Kconfig deleted file mode 100644 index 195bc26f9e..0000000000 --- a/board/jornada/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_JORNADA - -config SYS_BOARD - default "jornada" - -config SYS_CONFIG_NAME - default "jornada" - -endif diff --git a/board/jornada/MAINTAINERS b/board/jornada/MAINTAINERS deleted file mode 100644 index c77d745720..0000000000 --- a/board/jornada/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -JORNADA BOARD -M: Kristoffer Ericson <kristoffer.ericson@gmail.com> -S: Maintained -F: board/jornada/ -F: include/configs/jornada.h -F: configs/jornada_defconfig diff --git a/board/jornada/Makefile b/board/jornada/Makefile deleted file mode 100644 index 6a6fbf3551..0000000000 --- a/board/jornada/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# 2004 (c) MontaVista Software, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := jornada.o -obj-y += setup.o diff --git a/board/jornada/jornada.c b/board/jornada/jornada.c deleted file mode 100644 index ff6dbf0ed4..0000000000 --- a/board/jornada/jornada.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * 2004 (c) MontaVista Software, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <SA-1100.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_JORNADA720; - gd->bd->bi_boot_params = 0xc0000100; - - - /* - * Turn on flashing. - * Would be nice to have some protection but - * that would have to be implemented in the - * flash init function, which isnt possible yet. - */ - PPSR |= (1 << 7); - PPDR |= (1 << 7); - - return 0; -} - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - - return (0); -} diff --git a/board/jornada/setup.S b/board/jornada/setup.S deleted file mode 100644 index da9f00646d..0000000000 --- a/board/jornada/setup.S +++ /dev/null @@ -1,194 +0,0 @@ -/* - * Memory Setup stuff - taken from blob memsetup.S - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) - * 2004 (c) MontaVista Software, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include "config.h" -#include "version.h" - - -/*----------------------------------------------------------------------- - * Board defines: - */ - -#define MDCNFG 0x00 -#define MDCAS00 0x04 -#define MDCAS01 0x08 -#define MDCAS02 0x0C -#define MSC0 0x10 -#define MSC1 0x14 -#define MECR 0x18 -#define MDREFR 0x1C -#define MDCAS20 0x20 -#define MDCAS21 0x24 -#define MDCAS22 0x28 -#define MSC2 0x2C -#define SMCNFG 0x30 - -#define GPDR 0x04 -#define GPSR 0x08 -#define GPCR 0x0C -#define GAFR 0x1C - -#define PPDR 0x00 -#define PPSR 0x04 -#define PPAR 0x08 - -#define MDREFR_TRASR(n_) (n_ & (0x0000000f)) -#define MDREFR_DRI(n_) ((n_ & (0x00000fff)) << 4) -#define MDREFR_K0DB2 (1 << 18) -#define MDREFR_K1DB2 (1 << 22) -#define MDREFR_K2DB2 (1 << 26) - -#define MDREFR_K0RUN (1 << 17) -#define MDREFR_K1RUN (1 << 21) -#define MDREFR_K2RUN (1 << 25) - -#define MDREFR_SLFRSH (1 << 31) -#define MDREFR_E1PIN (1 << 20) - -#define PSSR 0x04 -#define PSSR_DH 0x00000008 -#define POSR 0x08 -#define RCSR 0x04 - -/*----------------------------------------------------------------------- - * Setup parameters for the board: - */ -MEM_BASE: .long 0xa0000000 -MEM_START: .long 0xc0000000 -PWR_BASE: .word 0x90020000 -RST_BASE: .long 0x90030000 -PPC_BASE: .long 0x90060000 -GPIO_BASE: .long 0x90040000 -IC_BASE: .word 0x90050000 - -cpuspeed: .word 0xa0 -/* calculated from old blob bootloader */ -mdcnfg: .long 0x00037267 /* mdcnfg 0x00037267 */ -mdcas00: .long 0x5555557f /* mdcas00 0x5555557f */ -mdcas01: .long 0x55555555 /* mdcas01 0x55555555 */ -mdcas02: .long 0x55555555 /* mdcas02 0x55555555 */ -msc0: .long 0xfff04f78 /* msc0 0xfff04f78 */ -msc1: .long 0xfff8fff0 /* msc1 0xfff8fff0 */ -mecr: .long 0x98c698c6 /* mecr 0x98c698c6 */ -mdrefr: .long 0x067600c7 /* mdrefr 0x04340327 */ -mdcas20: .long 0xd1284142 /* mdcas20 0xd1284142 */ -mdcas21: .long 0x72249529 /* mdcas21 0x72249529 */ -mdcas22: .long 0x78414351 /* mdcas22 0x78414351 */ -msc2: .long 0x201d2959 /* msc2 0x201d2959 */ -smcnfg: .long 0x00000000 /* smcnfg 0x00000000 */ - -pin_set_out: .long 0x37ff70 -pin_set_dir: .long 0x11480 - -gpdr_set: .long 0x0B3A0900 -gpsr_set: .long 0x02100800 -gpcr_set: .long 0x092A0100 -gafr_set: .long 0x08600000 - -.globl lowlevel_init -lowlevel_init: - - - /* this is required for flashing */ - ldr r0, PPC_BASE - ldr r1, pin_set_out - str r1, [r0, #PPSR] - ldr r1, pin_set_dir - str r1, [r0, #PPDR] - - /* Setting up the memory and stuff */ - /***********************************/ - - ldr r0, MEM_BASE - - ldr r1, mdcnfg - str r1, [r0, #MDCNFG] - ldr r1, mdcas00 - str r1, [r0, #MDCAS00] - ldr r1, mdcas01 - str r1, [r0, #MDCAS01] - ldr r1, mdcas02 - str r1, [r0, #MDCAS02] - ldr r1, mdcas20 - str r1, [r0, #MDCAS20] - ldr r1, mdcas21 - str r1, [r0, #MDCAS21] - ldr r1, mdcas22 - str r1, [r0, #MDCAS22] - - /* clear kxDB2 */ - ldr r2, [r0, #MDREFR] - bic r2, r2, #MDREFR_K0DB2 - bic r2, r2, #MDREFR_K1DB2 - bic r2, r2, #MDREFR_K2DB2 - str r2, [r0, #MDREFR] - - ldr r2, [r0, #MDREFR] - orr r2, r2, #MDREFR_TRASR(7) - - mov r4, #0x2000 - spin: subs r4, r4, #1 - bne spin - - ldr r1, PWR_BASE - mov r2, #PSSR_DH - str r2, [r1, #PSSR] - - ldr r2, [r0, #MDREFR] - bic r2, r2, #MDREFR_K0DB2 - bic r2, r2, #MDREFR_K1DB2 - bic r2, r2, #MDREFR_K2DB2 - str r2, [r0, #MDREFR] - - ldr r2, [r0, #MDREFR] - orr r2, r2, #MDREFR_TRASR(7) - orr r2, r2, #MDREFR_DRI(12) - orr r2, r2, #MDREFR_K0DB2 - orr r2, r2, #MDREFR_K1DB2 - orr r2, r2, #MDREFR_K2DB2 - str r2, [r0, #MDREFR] - - ldr r2, [r0, #MDREFR] - orr r2, r2, #MDREFR_K0RUN - orr r2, r2, #MDREFR_K1RUN - orr r2, r2, #MDREFR_K2RUN - str r2, [r0, #MDREFR] - - ldr r2, [r0, #MDREFR] - bic r2, r2, #MDREFR_SLFRSH - str r2, [r0, #MDREFR] - - ldr r2, [r0, #MDREFR] - orr r2, r2, #MDREFR_E1PIN - str r2, [r0, #MDREFR] - - ldr r2, MEM_START -.rept 8 - ldr r3, [r2] -.endr - - ldr r2, [r0, #MDCNFG] - orr r2, r2, #0x00000003 - orr r2, r2, #0x00030000 - str r2, [r0, #MDCNFG] - - ldr r1, msc0 - str r1, [r0, #MSC0] - ldr r1, msc1 - str r1, [r0, #MSC1] - ldr r1, msc2 - str r1, [r0, #MSC2] - ldr r1, smcnfg - str r1, [r0, #SMCNFG] - ldr r1, mecr - str r1, [r0, #MECR] - - mov pc, lr diff --git a/board/karo/tk71/Kconfig b/board/karo/tk71/Kconfig deleted file mode 100644 index 7b3d548667..0000000000 --- a/board/karo/tk71/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_TK71 - -config SYS_BOARD - default "tk71" - -config SYS_VENDOR - default "karo" - -config SYS_CONFIG_NAME - default "tk71" - -endif diff --git a/board/karo/tk71/MAINTAINERS b/board/karo/tk71/MAINTAINERS deleted file mode 100644 index ac85d6b44c..0000000000 --- a/board/karo/tk71/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -TK71 BOARD -#M: - -S: Maintained -F: board/karo/tk71/ -F: include/configs/tk71.h -F: configs/tk71_defconfig diff --git a/board/karo/tk71/Makefile b/board/karo/tk71/Makefile deleted file mode 100644 index 0e0df770f7..0000000000 --- a/board/karo/tk71/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) 2012 Marek Vasut <marex@denx.de> -# on behalf of DENX Software Engineering GmbH -# -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := tk71.o diff --git a/board/karo/tk71/kwbimage.cfg b/board/karo/tk71/kwbimage.cfg deleted file mode 100644 index a32e27c6a0..0000000000 --- a/board/karo/tk71/kwbimage.cfg +++ /dev/null @@ -1,158 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# adopted to TK71 by -# Nils Faerber <nils.faerber@kernelconcepts.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1b1b1b9b - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x36543000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x1101355b # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000034 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x00000000 # DDR Address Control -# bit1-0: 01, Cs0width=x16 -# bit3-2: 10, Cs0size=512Mb -# bit5-4: 01, Cs1width=x16 -# bit7-6: 10, Cs1size=512Mb -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000652 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000042 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 0, DDR ODT control lsd (disabled) -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, (disabled) -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 0 -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x1FFFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x0F, Size (i.e. 256MB) - -DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 256Mb -DATA 0xFFD0150C 0x00000000 # CS[1]n Size 256Mb Window enabled for CS1 - -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00110000 # DDR ODT Control (Low) -# bit3-0: 0010, (read) M_ODT[0] is asserted during read from DRAM CS1 -# bit7-4: 0001, (read) M_ODT[1] is asserted during read from DRAM CS0 -# bit19-16: 0010, (write) M_ODT[0] is asserted during write to DRAM CS1. -# bit23-20: 0001, (write) M_ODT[1] is asserted during write to DRAM CS0. -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000F80F # CPU ODT Control -# bit3-0: 1111, internal ODT is asserted during read from DRAM bank 0-3 -# bit11-10: 01, M_DQ, M_DM, and M_DQS I/O buffer ODT Select: 150 ohm -# bit13-12: 10, M_STARTBURST_IN I/O buffer ODT Select: 75 ohm -# bit14: 1, M_STARTBURST_IN ODT: Enabled -# bit15: 1, DDR IO ODT Unit: Use ODT block -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/board/karo/tk71/tk71.c b/board/karo/tk71/tk71.c deleted file mode 100644 index 35546d24e8..0000000000 --- a/board/karo/tk71/tk71.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * Copyright (C) 2012 Marek Vasut <marex@denx.de> - * on behalf of DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <miiphy.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define TK71_OE_LOW (~0) -#define TK71_OE_HIGH (~0) -#define TK71_OE_VAL_LOW (0) -#define TK71_OE_VAL_HIGH (0) - -int board_early_init_f(void) -{ - /* - * default gpio configuration - * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status - */ - mvebu_config_gpio(TK71_OE_VAL_LOW, - TK71_OE_VAL_HIGH, - TK71_OE_LOW, TK71_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - static const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, - MPP13_SD_CMD, - MPP14_SD_D0, - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GE1_0, - MPP21_GE1_1, - MPP22_GE1_2, - MPP23_GE1_3, - MPP24_GE1_4, - MPP25_GE1_5, - MPP26_GE1_6, - MPP27_GE1_7, - MPP28_GPIO, - MPP29_GPIO, - MPP30_GE1_10, - MPP31_GE1_11, - MPP32_GE1_12, - MPP33_GE1_13, - MPP34_GPIO, - MPP35_GPIO, - MPP36_GPIO, - MPP37_GPIO, - MPP38_GPIO, - MPP39_GPIO, - MPP40_GPIO, - MPP41_GPIO, - MPP42_GPIO, - MPP43_GPIO, - MPP44_GPIO, - MPP45_GPIO, - MPP46_GPIO, - MPP47_GPIO, - MPP48_GPIO, - MPP49_GPIO, - 0 - }; - kirkwood_mpp_conf(kwmpp_config, NULL); - - return 0; -} - -int board_init(void) -{ - /* - * arch number of board - */ - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -#ifdef CONFIG_CMD_NET - -#define MV88E1116_MAC_CTRL2_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -static void mv_phy_88e1118_init(char *name) -{ - u16 reg; - u16 devadr; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..%s could not read PHY dev address\n", - __func__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL2_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL2_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - miiphy_reset(name, devadr); - - printf("88E1118 Initialized on %s\n", name); -} - -/* Configure and enable Switch and PHY */ -void reset_phy(void) -{ - /* configure and initialize PHY */ - mv_phy_88e1118_init("egiga0"); - -} -#endif diff --git a/board/karo/tx25/Kconfig b/board/karo/tx25/Kconfig deleted file mode 100644 index 42746c1c0f..0000000000 --- a/board/karo/tx25/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_TX25 - -config SYS_BOARD - default "tx25" - -config SYS_VENDOR - default "karo" - -config SYS_SOC - default "mx25" - -config SYS_CONFIG_NAME - default "tx25" - -endif diff --git a/board/karo/tx25/MAINTAINERS b/board/karo/tx25/MAINTAINERS deleted file mode 100644 index 2defe342ff..0000000000 --- a/board/karo/tx25/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -TX25 BOARD -M: John Rigby <jcrigby@gmail.com> -S: Maintained -F: board/karo/tx25/ -F: include/configs/tx25.h -F: configs/tx25_defconfig diff --git a/board/karo/tx25/Makefile b/board/karo/tx25/Makefile deleted file mode 100644 index add5dd3669..0000000000 --- a/board/karo/tx25/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2009 DENX Software Engineering -# Author: John Rigby <jcrigby@gmail.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-y += lowlevel_init.o -endif -obj-y += tx25.o diff --git a/board/karo/tx25/lowlevel_init.S b/board/karo/tx25/lowlevel_init.S deleted file mode 100644 index 11b80b42a3..0000000000 --- a/board/karo/tx25/lowlevel_init.S +++ /dev/null @@ -1,98 +0,0 @@ -/* - * (C) Copyright 2009 DENX Software Engineering - * Author: John Rigby <jrigby@gmail.com> - * - * Based on U-Boot and RedBoot sources for several different i.mx - * platforms. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/macro.h> -#include <asm/arch/macro.h> - -.macro init_clocks - /* - * clocks - * - * first enable CLKO debug output - * 0x40000000 enables the debug CLKO signal - * 0x05000000 sets CLKO divider to 6 - * 0x00600000 makes CLKO parent clk the USB clk - */ - write32 0x53f80064, 0x45600000 - - /* CCTL: ARM = 399 MHz, AHB = 133 MHz */ - write32 0x53f80008, 0x20034000 - - /* - * PCDR2: NFC = 33.25 MHz - * This is required for the NAND Flash of this board, which is a Samsung - * K9F1G08U0B with 25-ns R/W cycle times, in order to make it work with - * the NFC driver in symmetric (i.e. one-cycle) mode. - */ - write32 0x53f80020, 0x01010103 - - /* - * enable all implemented clocks in all three - * clock control registers - */ - write32 0x53f8000c, 0x1fffffff - write32 0x53f80010, 0xffffffff - write32 0x53f80014, 0xfdfff -.endm - -.macro init_ddrtype - /* - * ddr_type is 3.3v SDRAM - */ - write32 0x43fac454, 0x800 -.endm - -/* - * sdram controller init - */ -.macro init_sdram_bank bankaddr, ctl, cfg - ldr r0, =0xb8001000 - ldr r2, =\bankaddr - /* - * reset SDRAM controller - * then wait for initialization to complete - */ - ldr r1, =(1 << 1) - str r1, [r0, #0x10] -1: ldr r3, [r0, #0x10] - tst r3, #(1 << 31) - beq 1b - - ldr r1, =0x95728 - str r1, [r0, #\cfg] /* config */ - - ldr r1, =0x92116480 /* control | precharge */ - str r1, [r0, #\ctl] /* write command to controller */ - str r1, [r2, #0x400] /* command encoded in address */ - - ldr r1, =0xa2116480 /* auto refresh */ - str r1, [r0, #\ctl] - ldrb r3, [r2] /* read dram twice to auto refresh */ - ldrb r3, [r2] - - ldr r1, =0xb2116480 /* control | load mode */ - str r1, [r0, #\ctl] /* write command to controller */ - strb r1, [r2, #0x33] /* command encoded in address */ - - ldr r1, =0x82116480 /* control | normal (0)*/ - str r1, [r0, #\ctl] /* write command to controller */ -.endm - -.globl lowlevel_init -lowlevel_init: - init_aips - init_max - init_m3if - init_clocks - - init_sdram_bank 0x80000000, 0x0, 0x4 - - init_sdram_bank 0x90000000, 0x8, 0xc - mov pc, lr diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c deleted file mode 100644 index 4d1a0ec725..0000000000 --- a/board/karo/tx25/tx25.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * (C) Copyright 2009 DENX Software Engineering - * Author: John Rigby <jrigby@gmail.com> - * - * Based on imx27lite.c: - * Copyright (C) 2008,2009 Eric Jarrige <jorasse@users.sourceforge.net> - * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> - * And: - * RedBoot tx25_misc.c Copyright (C) 2009 Red Hat - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/iomux-mx25.h> -#include <asm/gpio.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_SPL_BUILD -void board_init_f(ulong bootflag) -{ - /* - * copy ourselves from where we are running to where we were - * linked at. Use ulong pointers as all addresses involved - * are 4-byte-aligned. - */ - ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst; - asm volatile ("ldr %0, =_start" : "=r"(start_ptr)); - asm volatile ("ldr %0, =_end" : "=r"(end_ptr)); - asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr)); - asm volatile ("adr %0, board_init_f" : "=r"(run_ptr)); - for (dst = start_ptr; dst < end_ptr; dst++) - *dst = *(dst+(run_ptr-link_ptr)); - /* - * branch to nand_boot's link-time address. - */ - asm volatile("ldr pc, =nand_boot"); -} -#endif - -#ifdef CONFIG_FEC_MXC -/* - * FIXME: need to revisit this - * The original code enabled PUE and 100-k pull-down without PKE, so the right - * value here is likely: - * 0 for no pull - * or: - * PAD_CTL_PUS_100K_DOWN for 100-k pull-down - */ -#define FEC_OUT_PAD_CTRL 0 - -#define GPIO_FEC_RESET_B IMX_GPIO_NR(4, 7) -#define GPIO_FEC_ENABLE_B IMX_GPIO_NR(4, 9) - -void tx25_fec_init(void) -{ - static const iomux_v3_cfg_t fec_pads[] = { - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX25_PAD_FEC_RX_DV__FEC_RX_DV, - MX25_PAD_FEC_RDATA0__FEC_RDATA0, - NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL), - MX25_PAD_FEC_MDIO__FEC_MDIO, - MX25_PAD_FEC_RDATA1__FEC_RDATA1, - NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL), - - NEW_PAD_CTRL(MX25_PAD_D13__GPIO_4_7, 0), /* FEC_RESET_B */ - NEW_PAD_CTRL(MX25_PAD_D11__GPIO_4_9, 0), /* FEC_ENABLE_B */ - }; - - static const iomux_v3_cfg_t fec_cfg_pads[] = { - MX25_PAD_FEC_RDATA0__GPIO_3_10, - MX25_PAD_FEC_RDATA1__GPIO_3_11, - MX25_PAD_FEC_RX_DV__GPIO_3_12, - }; - - debug("tx25_fec_init\n"); - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); - - /* drop PHY power and assert reset (low) */ - gpio_direction_output(GPIO_FEC_RESET_B, 0); - gpio_direction_output(GPIO_FEC_ENABLE_B, 0); - - mdelay(5); - - debug("resetting phy\n"); - - /* turn on PHY power leaving reset asserted */ - gpio_set_value(GPIO_FEC_ENABLE_B, 1); - - mdelay(10); - - /* - * Setup some strapping pins that are latched by the PHY - * as reset goes high. - * - * Set PHY mode to 111 - * mode0 comes from FEC_RDATA0 which is GPIO 3_10 in mux mode 5 - * mode1 comes from FEC_RDATA1 which is GPIO 3_11 in mux mode 5 - * mode2 is tied high so nothing to do - * - * Turn on RMII mode - * RMII mode is selected by FEC_RX_DV which is GPIO 3_12 in mux mode - */ - /* - * set each mux mode to gpio mode - */ - imx_iomux_v3_setup_multiple_pads(fec_cfg_pads, - ARRAY_SIZE(fec_cfg_pads)); - - /* - * set each to 1 and make each an output - */ - gpio_direction_output(IMX_GPIO_NR(3, 10), 1); - gpio_direction_output(IMX_GPIO_NR(3, 11), 1); - gpio_direction_output(IMX_GPIO_NR(3, 12), 1); - - mdelay(22); /* this value came from RedBoot */ - - /* - * deassert PHY reset - */ - gpio_set_value(GPIO_FEC_RESET_B, 1); - - mdelay(5); - - /* - * set FEC pins back - */ - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); -} -#else -#define tx25_fec_init() -#endif - -#ifdef CONFIG_MXC_UART -/* - * Set up input pins with hysteresis and 100-k pull-ups - */ -#define UART1_IN_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP) -/* - * FIXME: need to revisit this - * The original code enabled PUE and 100-k pull-down without PKE, so the right - * value here is likely: - * 0 for no pull - * or: - * PAD_CTL_PUS_100K_DOWN for 100-k pull-down - */ -#define UART1_OUT_PAD_CTRL 0 - -static void tx25_uart1_init(void) -{ - static const iomux_v3_cfg_t uart1_pads[] = { - NEW_PAD_CTRL(MX25_PAD_UART1_RXD__UART1_RXD, UART1_IN_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_UART1_TXD__UART1_TXD, UART1_OUT_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_UART1_RTS__UART1_RTS, UART1_OUT_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_UART1_CTS__UART1_CTS, UART1_IN_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); -} -#else -#define tx25_uart1_init() -#endif - -int board_init() -{ - tx25_uart1_init(); - - /* board id for linux */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - return 0; -} - -int board_late_init(void) -{ - tx25_fec_init(); - return 0; -} - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); -#if CONFIG_NR_DRAM_BANKS > 1 - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, - PHYS_SDRAM_2_SIZE); -#else - -#endif -} - -int checkboard(void) -{ - printf("KARO TX25\n"); - return 0; -} diff --git a/board/kosagi/novena/Kconfig b/board/kosagi/novena/Kconfig index 94f1754a47..c5cbaabe6a 100644 --- a/board/kosagi/novena/Kconfig +++ b/board/kosagi/novena/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "kosagi" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "novena" diff --git a/board/logicpd/imx27lite/Kconfig b/board/logicpd/imx27lite/Kconfig deleted file mode 100644 index c7de2e3814..0000000000 --- a/board/logicpd/imx27lite/Kconfig +++ /dev/null @@ -1,31 +0,0 @@ -if TARGET_IMX27LITE - -config SYS_BOARD - default "imx27lite" - -config SYS_VENDOR - default "logicpd" - -config SYS_SOC - default "mx27" - -config SYS_CONFIG_NAME - default "imx27lite" - -endif - -if TARGET_MAGNESIUM - -config SYS_BOARD - default "imx27lite" - -config SYS_VENDOR - default "logicpd" - -config SYS_SOC - default "mx27" - -config SYS_CONFIG_NAME - default "magnesium" - -endif diff --git a/board/logicpd/imx27lite/MAINTAINERS b/board/logicpd/imx27lite/MAINTAINERS deleted file mode 100644 index a7b22ac049..0000000000 --- a/board/logicpd/imx27lite/MAINTAINERS +++ /dev/null @@ -1,12 +0,0 @@ -IMX27LITE BOARD -M: Wolfgang Denk <wd@denx.de> -S: Maintained -F: board/logicpd/imx27lite/ -F: include/configs/imx27lite.h -F: configs/imx27lite_defconfig - -MAGNESIUM BOARD -M: Heiko Schocher <hs@denx.de> -S: Maintained -F: include/configs/magnesium.h -F: configs/magnesium_defconfig diff --git a/board/logicpd/imx27lite/Makefile b/board/logicpd/imx27lite/Makefile deleted file mode 100644 index 50a3da62ed..0000000000 --- a/board/logicpd/imx27lite/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := imx27lite.o -obj-y += lowlevel_init.o diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c deleted file mode 100644 index 07b07a07f6..0000000000 --- a/board/logicpd/imx27lite/imx27lite.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (C) 2007 Sascha Hauer, Pengutronix - * Copyright (C) 2008,2009 Eric Jarrige <jorasse@users.sourceforge.net> - * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/gpio.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ -#if defined(CONFIG_SYS_NAND_LARGEPAGE) - struct system_control_regs *sc_regs = - (struct system_control_regs *)IMX_SYSTEM_CTL_BASE; -#endif - - gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - -#ifdef CONFIG_MXC_UART - mx27_uart1_init_pins(); -#endif -#ifdef CONFIG_FEC_MXC - mx27_fec_init_pins(); - imx_gpio_mode((GPIO_PORTC | GPIO_OUT | GPIO_PUEN | GPIO_GPIO | 31)); - gpio_set_value(GPIO_PORTC | 31, 1); -#endif -#ifdef CONFIG_MXC_MMC -#if defined(CONFIG_MAGNESIUM) - mx27_sd1_init_pins(); -#else - mx27_sd2_init_pins(); -#endif -#endif - -#if defined(CONFIG_SYS_NAND_LARGEPAGE) - /* - * set in FMCR NF_FMS Bit(5) to 1 - * (NAND Flash with 2 Kbyte page size) - */ - writel(readl(&sc_regs->fmcr) | (1 << 5), &sc_regs->fmcr); -#endif - return 0; -} - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); -#if CONFIG_NR_DRAM_BANKS > 1 - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, - PHYS_SDRAM_2_SIZE); -#endif -} - -int checkboard(void) -{ - puts("Board: "); - puts(CONFIG_BOARDNAME); - return 0; -} diff --git a/board/logicpd/imx27lite/lowlevel_init.S b/board/logicpd/imx27lite/lowlevel_init.S deleted file mode 100644 index 9cb702f30f..0000000000 --- a/board/logicpd/imx27lite/lowlevel_init.S +++ /dev/null @@ -1,156 +0,0 @@ -/* - * For clock initialization, see chapter 3 of the "MCIMX27 Multimedia - * Applications Processor Reference Manual, Rev. 0.2". - * - * (C) Copyright 2008 Eric Jarrige <eric.jarrige@armadeus.org> - * (C) Copyright 2009 Ilya Yanok <yanok@emcraft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include <config.h> -#include <asm/macro.h> -#include <asm/arch/imx-regs.h> -#include <generated/asm-offsets.h> - -SOC_ESDCTL_BASE_W: .word IMX_ESD_BASE -SOC_SI_ID_REG_W: .word IMX_SYSTEM_CTL_BASE -SDRAM_ESDCFG_T1_W: .word SDRAM_ESDCFG_REGISTER_VAL(0) -SDRAM_ESDCFG_T2_W: .word SDRAM_ESDCFG_REGISTER_VAL(3) -SDRAM_PRECHARGE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_PRECHARGE | \ - ESDCTL_ROW13 | ESDCTL_COL10) -SDRAM_AUTOREF_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_AUTO_REF | \ - ESDCTL_ROW13 | ESDCTL_COL10) -SDRAM_LOADMODE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_LOAD_MODE | \ - ESDCTL_ROW13 | ESDCTL_COL10) -SDRAM_NORMAL_CMD_W: .word SDRAM_ESDCTL_REGISTER_VAL - -.macro init_aipi - /* - * setup AIPI1 and AIPI2 - */ - write32 AIPI1_PSR0, AIPI1_PSR0_VAL - write32 AIPI1_PSR1, AIPI1_PSR1_VAL - write32 AIPI2_PSR0, AIPI2_PSR0_VAL - write32 AIPI2_PSR1, AIPI2_PSR1_VAL - -.endm /* init_aipi */ - -.macro init_clock - ldr r0, =CSCR - /* disable MPLL/SPLL first */ - ldr r1, [r0] - bic r1, r1, #(CSCR_MPEN|CSCR_SPEN) - str r1, [r0] - - write32 MPCTL0, MPCTL0_VAL - write32 SPCTL0, SPCTL0_VAL - - write32 CSCR, CSCR_VAL | CSCR_MPLL_RESTART | CSCR_SPLL_RESTART - - /* - * add some delay here - */ - wait_timer 0x1000 - - /* peripheral clock divider */ - write32 PCDR0, PCDR0_VAL - write32 PCDR1, PCDR1_VAL - - /* Configure PCCR0 and PCCR1 */ - write32 PCCR0, PCCR0_VAL - write32 PCCR1, PCCR1_VAL - -.endm /* init_clock */ - -.macro sdram_init - ldr r0, SOC_ESDCTL_BASE_W - mov r2, #PHYS_SDRAM_1 - - /* Do initial reset */ - mov r1, #ESDMISC_MDDR_DL_RST - str r1, [r0, #ESDMISC_ROF] - - /* Hold for more than 200ns */ - wait_timer 0x10000 - - /* Activate LPDDR iface */ - mov r1, #ESDMISC_MDDREN - str r1, [r0, #ESDMISC_ROF] - - /* Check The chip version TO1 or TO2 */ - ldr r1, SOC_SI_ID_REG_W - ldr r1, [r1] - ands r1, r1, #0xF0000000 - /* add Latency on CAS only for TO2 */ - ldreq r1, SDRAM_ESDCFG_T2_W - ldrne r1, SDRAM_ESDCFG_T1_W - str r1, [r0, #ESDCFG0_ROF] - - /* Run initialization sequence */ - ldr r1, SDRAM_PRECHARGE_CMD_W - str r1, [r0, #ESDCTL0_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_AUTOREF_CMD_W - str r1, [r0, #ESDCTL0_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_LOADMODE_CMD_W - str r1, [r0, #ESDCTL0_ROF] - ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL] - add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL - ldrb r1, [r3] - - ldr r1, SDRAM_NORMAL_CMD_W - str r1, [r0, #ESDCTL0_ROF] - -#if (CONFIG_NR_DRAM_BANKS > 1) - /* 2nd sdram */ - mov r2, #PHYS_SDRAM_2 - - /* Check The chip version TO1 or TO2 */ - ldr r1, SOC_SI_ID_REG_W - ldr r1, [r1] - ands r1, r1, #0xF0000000 - /* add Latency on CAS only for TO2 */ - ldreq r1, SDRAM_ESDCFG_T2_W - ldrne r1, SDRAM_ESDCFG_T1_W - str r1, [r0, #ESDCFG1_ROF] - - /* Run initialization sequence */ - ldr r1, SDRAM_PRECHARGE_CMD_W - str r1, [r0, #ESDCTL1_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_AUTOREF_CMD_W - str r1, [r0, #ESDCTL1_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_LOADMODE_CMD_W - str r1, [r0, #ESDCTL1_ROF] - ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL] - add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL - ldrb r1, [r3] - - ldr r1, SDRAM_NORMAL_CMD_W - str r1, [r0, #ESDCTL1_ROF] -#endif /* CONFIG_NR_DRAM_BANKS > 1 */ - -.endm /* sdram_init */ - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - - init_aipi - - init_clock - - sdram_init - - mov pc,r10 diff --git a/board/logicpd/imx31_litekit/Kconfig b/board/logicpd/imx31_litekit/Kconfig deleted file mode 100644 index d90f854a18..0000000000 --- a/board/logicpd/imx31_litekit/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_IMX31_LITEKIT - -config SYS_BOARD - default "imx31_litekit" - -config SYS_VENDOR - default "logicpd" - -config SYS_SOC - default "mx31" - -config SYS_CONFIG_NAME - default "imx31_litekit" - -endif diff --git a/board/logicpd/imx31_litekit/MAINTAINERS b/board/logicpd/imx31_litekit/MAINTAINERS deleted file mode 100644 index 8e3608e0af..0000000000 --- a/board/logicpd/imx31_litekit/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -IMX31_LITEKIT BOARD -#M: - -S: Maintained -F: board/logicpd/imx31_litekit/ -F: include/configs/imx31_litekit.h -F: configs/imx31_litekit_defconfig diff --git a/board/logicpd/imx31_litekit/Makefile b/board/logicpd/imx31_litekit/Makefile deleted file mode 100644 index 3fd71c8deb..0000000000 --- a/board/logicpd/imx31_litekit/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := imx31_litekit.o -obj-y += lowlevel_init.o diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c deleted file mode 100644 index 386e106324..0000000000 --- a/board/logicpd/imx31_litekit/imx31_litekit.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * - * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include <common.h> -#include <netdev.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/sys_proto.h> - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - return 0; -} - -int board_early_init_f(void) -{ - /* CS0: Nor Flash */ - static const struct mxc_weimcs cs0 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(10, 0, 3, 3, 0, 1, 5, 0, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(0, 0, 2, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0) - }; - - /* CS4: Network Controller */ - static const struct mxc_weimcs cs4 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 28, 1, 7, 6), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0) - }; - - mxc_setup_weimcs(0, &cs0); - mxc_setup_weimcs(4, &cs4); - - /* setup pins for UART1 */ - mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); - mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); - mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); - mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); - - /* SPI2 */ - mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B); - mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK); - mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B); - mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI); - mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO); - mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B); - mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B); - - /* start SPI2 clock */ - __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */ - - return 0; -} - -int checkboard(void) -{ - printf("Board: i.MX31 Litekit\n"); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} diff --git a/board/logicpd/imx31_litekit/lowlevel_init.S b/board/logicpd/imx31_litekit/lowlevel_init.S deleted file mode 100644 index 7c456bc4a7..0000000000 --- a/board/logicpd/imx31_litekit/lowlevel_init.S +++ /dev/null @@ -1,87 +0,0 @@ -/* - * - * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/imx-regs.h> - -.macro REG reg, val - ldr r2, =\reg - ldr r3, =\val - str r3, [r2] -.endm - -.macro REG8 reg, val - ldr r2, =\reg - ldr r3, =\val - strb r3, [r2] -.endm - -.macro DELAY loops - ldr r2, =\loops -1: - subs r2, r2, #1 - nop - bcs 1b -.endm - -.globl lowlevel_init -lowlevel_init: - - REG IPU_CONF, IPU_CONF_DI_EN - REG CCM_CCMR, 0x074B0BF5 - - DELAY 0x40000 - - REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE - REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS - - REG CCM_PDR0, PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | PDR0_PER_PODF(7) | PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) | PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) | PDR0_MCU_PODF(0) - - REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) | PLL_MFN(0x23) - REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1) - - REG 0x43FAC26C, 0 /* SDCLK */ - REG 0x43FAC270, 0 /* CAS */ - REG 0x43FAC274, 0 /* RAS */ - REG 0x43FAC27C, 0x1000 /* CS2 (CSD0) */ - REG 0x43FAC284, 0 /* DQM3 */ - REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */ - REG 0x43FAC28C, 0 - REG 0x43FAC290, 0 - REG 0x43FAC294, 0 - REG 0x43FAC298, 0 - REG 0x43FAC29C, 0 - REG 0x43FAC2A0, 0 - REG 0x43FAC2A4, 0 - REG 0x43FAC2A8, 0 - REG 0x43FAC2AC, 0 - REG 0x43FAC2B0, 0 - REG 0x43FAC2B4, 0 - REG 0x43FAC2B8, 0 - REG 0x43FAC2BC, 0 - REG 0x43FAC2C0, 0 - REG 0x43FAC2C4, 0 - REG 0x43FAC2C8, 0 - REG 0x43FAC2CC, 0 - REG 0x43FAC2D0, 0 - REG 0x43FAC2D4, 0 - REG 0x43FAC2D8, 0 - REG 0x43FAC2DC, 0 - REG 0xB8001010, 0x00000004 - REG 0xB8001004, 0x006ac73a - REG 0xB8001000, 0x92100000 - REG 0x80000f00, 0x12344321 - REG 0xB8001000, 0xa2100000 - REG 0x80000000, 0x12344321 - REG 0x80000000, 0x12344321 - REG 0xB8001000, 0xb2100000 - REG8 0x80000033, 0xda - REG8 0x81000000, 0xff - REG 0xB8001000, 0x82226080 - REG 0x80000000, 0xDEADBEEF - REG 0xB8001010, 0x0000000c - - mov pc, lr diff --git a/board/lwmon5/Kconfig b/board/lwmon5/Kconfig new file mode 100644 index 0000000000..7b8c605a07 --- /dev/null +++ b/board/lwmon5/Kconfig @@ -0,0 +1,13 @@ +if TARGET_LWMON5 + +config SYS_BOARD + default "lwmon5" + +config SYS_CONFIG_NAME + default "lwmon5" + +config DISPLAY_BOARDINFO + bool + default y + +endif diff --git a/board/lwmon5/MAINTAINERS b/board/lwmon5/MAINTAINERS new file mode 100644 index 0000000000..3ea1888cea --- /dev/null +++ b/board/lwmon5/MAINTAINERS @@ -0,0 +1,6 @@ +LWMON5 BOARD +M: Stefan Roese <sr@denx.de> +S: Maintained +F: board/lwmon5/ +F: include/configs/lwmon5.h +F: configs/lwmon5_defconfig diff --git a/board/comelit/dig297/Makefile b/board/lwmon5/Makefile index 1c85b63bf3..02478ca0c8 100644 --- a/board/comelit/dig297/Makefile +++ b/board/lwmon5/Makefile @@ -1,8 +1,9 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2002-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # SPDX-License-Identifier: GPL-2.0+ # -obj-y := dig297.o +obj-y = lwmon5.o kbd.o sdram.o +extra-y += init.o diff --git a/board/lwmon5/config.mk b/board/lwmon5/config.mk new file mode 100644 index 0000000000..d0348e8024 --- /dev/null +++ b/board/lwmon5/config.mk @@ -0,0 +1,18 @@ +# +# (C) Copyright 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# +# lwmon5 (440EPx) +# + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 +endif diff --git a/board/lwmon5/init.S b/board/lwmon5/init.S new file mode 100644 index 0000000000..e5207c2b40 --- /dev/null +++ b/board/lwmon5/init.S @@ -0,0 +1,75 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm-offsets.h> +#include <ppc_asm.tmpl> +#include <config.h> +#include <asm/mmu.h> + +/************************************************************************** + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + * + *************************************************************************/ + .section .bootpg,"ax" + .globl tlbtab + +tlbtab: + tlbtab_start + + /* + * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the + * speed up boot process. It is patched after relocation to enable SA_I + */ + tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G) + + /* + * TLB entries for SDRAM are not needed on this platform. + * They are dynamically generated in the SPD DDR(2) detection + * routine. + */ + +#ifdef CONFIG_SYS_INIT_RAM_DCACHE + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G) +#endif + + /* TLB-entry for PCI Memory */ + tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_RW | SA_IG) + tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_RW | SA_IG) + + /* TLB-entry for the FPGA Chip select 2 */ + tlbentry(CONFIG_SYS_FPGA_BASE_0, SZ_1M, CONFIG_SYS_FPGA_BASE_0, 1, AC_RWX | SA_I|SA_G) + + /* TLB-entry for the FPGA Chip select 3 */ + tlbentry(CONFIG_SYS_FPGA_BASE_1, SZ_1M, CONFIG_SYS_FPGA_BASE_1, 1,AC_RWX | SA_I|SA_G) + + /* TLB-entry for the LIME Controller */ + tlbentry(CONFIG_SYS_LIME_BASE_0, SZ_16M, CONFIG_SYS_LIME_BASE_0, 1, AC_RWX | SA_I|SA_G) + tlbentry(CONFIG_SYS_LIME_BASE_1, SZ_16M, CONFIG_SYS_LIME_BASE_1, 1, AC_RWX | SA_I|SA_G) + tlbentry(CONFIG_SYS_LIME_BASE_2, SZ_16M, CONFIG_SYS_LIME_BASE_2, 1, AC_RWX | SA_I|SA_G) + tlbentry(CONFIG_SYS_LIME_BASE_3, SZ_16M, CONFIG_SYS_LIME_BASE_3, 1, AC_RWX | SA_I|SA_G) + + /* TLB-entry for Internal Registers & OCM */ + tlbentry(0xe0000000, SZ_16M, 0xe0000000, 0, AC_RWX | SA_I) + + /*TLB-entry PCI registers*/ + tlbentry(0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_RWX | SA_IG) + + /* TLB-entry for peripherals */ + tlbentry(0xEF000000, SZ_16M, 0xEF000000, 1, AC_RWX | SA_IG) + + tlbtab_end diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c new file mode 100644 index 0000000000..97962daf93 --- /dev/null +++ b/board/lwmon5/kbd.c @@ -0,0 +1,490 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2001, 2002 + * DENX Software Engineering + * Wolfgang Denk, wd@denx.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + +#include <common.h> +#include <i2c.h> +#include <command.h> +#include <post.h> +#include <serial.h> +#include <malloc.h> + +#include <linux/types.h> +#include <linux/string.h> /* for strdup */ + +DECLARE_GLOBAL_DATA_PTR; + +static void kbd_init (void); +static int compare_magic (uchar *kbd_data, uchar *str); + +/*--------------------- Local macros and constants --------------------*/ +#define _NOT_USED_ 0xFFFFFFFF + +/*------------------------- dspic io expander -----------------------*/ +#define DSPIC_PON_STATUS_REG 0x80A +#define DSPIC_PON_INV_STATUS_REG 0x80C +#define DSPIC_PON_KEY_REG 0x810 +/*------------------------- Keyboard controller -----------------------*/ +/* command codes */ +#define KEYBD_CMD_READ_KEYS 0x01 +#define KEYBD_CMD_READ_VERSION 0x02 +#define KEYBD_CMD_READ_STATUS 0x03 +#define KEYBD_CMD_RESET_ERRORS 0x10 + +/* status codes */ +#define KEYBD_STATUS_MASK 0x3F +#define KEYBD_STATUS_H_RESET 0x20 +#define KEYBD_STATUS_BROWNOUT 0x10 +#define KEYBD_STATUS_WD_RESET 0x08 +#define KEYBD_STATUS_OVERLOAD 0x04 +#define KEYBD_STATUS_ILLEGAL_WR 0x02 +#define KEYBD_STATUS_ILLEGAL_RD 0x01 + +/* Number of bytes returned from Keyboard Controller */ +#define KEYBD_VERSIONLEN 2 /* version information */ + +/* + * This is different from the "old" lwmon dsPIC kbd controller + * implementation. Now the controller still answers with 9 bytes, + * but the last 3 bytes are always "0x06 0x07 0x08". So we just + * set the length to compare to 6 instead of 9. + */ +#define KEYBD_DATALEN 6 /* normal key scan data */ + +/* maximum number of "magic" key codes that can be assigned */ + +static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR; +static uchar dspic_addr = CONFIG_SYS_I2C_DSPIC_IO_ADDR; + +static uchar *key_match (uchar *); + +#define KEYBD_SET_DEBUGMODE '#' /* Magic key to enable debug output */ + +/*********************************************************************** +F* Function: int board_postclk_init (void) P*A*Z* + * +P* Parameters: none +P* +P* Returnvalue: int +P* - 0 is always returned. + * +Z* Intention: This function is the board_postclk_init() method implementation +Z* for the lwmon board. + * + ***********************************************************************/ +int board_postclk_init (void) +{ + kbd_init(); + + return (0); +} + +static void kbd_init (void) +{ + uchar kbd_data[KEYBD_DATALEN]; + uchar tmp_data[KEYBD_DATALEN]; + uchar val, errcd; + int i; + + i2c_set_bus_num(0); + + gd->arch.kbd_status = 0; + + /* Forced by PIC. Delays <= 175us loose */ + udelay(1000); + + /* Read initial keyboard error code */ + val = KEYBD_CMD_READ_STATUS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, &errcd, 1); + /* clear unused bits */ + errcd &= KEYBD_STATUS_MASK; + /* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */ + errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT); + if (errcd) { + gd->arch.kbd_status |= errcd << 8; + } + /* Reset error code and verify */ + val = KEYBD_CMD_RESET_ERRORS; + i2c_write (kbd_addr, 0, 0, &val, 1); + udelay(1000); /* delay NEEDED by keyboard PIC !!! */ + + val = KEYBD_CMD_READ_STATUS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, &val, 1); + + val &= KEYBD_STATUS_MASK; /* clear unused bits */ + if (val) { /* permanent error, report it */ + gd->arch.kbd_status |= val; + return; + } + + /* + * Read current keyboard state. + * + * After the error reset it may take some time before the + * keyboard PIC picks up a valid keyboard scan - the total + * scan time is approx. 1.6 ms (information by Martin Rajek, + * 28 Sep 2002). We read a couple of times for the keyboard + * to stabilize, using a big enough delay. + * 10 times should be enough. If the data is still changing, + * we use what we get :-( + */ + + memset (tmp_data, 0xFF, KEYBD_DATALEN); /* impossible value */ + for (i=0; i<10; ++i) { + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + if (memcmp(kbd_data, tmp_data, KEYBD_DATALEN) == 0) { + /* consistent state, done */ + break; + } + /* remeber last state, delay, and retry */ + memcpy (tmp_data, kbd_data, KEYBD_DATALEN); + udelay (5000); + } +} + + +/* Read a register from the dsPIC. */ +int _dspic_read(ushort reg, ushort *data) +{ + uchar buf[sizeof(*data)]; + int rval; + + if (i2c_read(dspic_addr, reg, 2, buf, 2)) + return -1; + + rval = i2c_read(dspic_addr, reg, sizeof(reg), buf, sizeof(*data)); + *data = (buf[0] << 8) | buf[1]; + + return rval; +} + + +/*********************************************************************** +F* Function: int misc_init_r (void) P*A*Z* + * +P* Parameters: none +P* +P* Returnvalue: int +P* - 0 is always returned, even in the case of a keyboard +P* error. + * +Z* Intention: This function is the misc_init_r() method implementation +Z* for the lwmon board. +Z* The keyboard controller is initialized and the result +Z* of a read copied to the environment variable "keybd". +Z* If KEYBD_SET_DEBUGMODE is defined, a check is made for +Z* this key, and if found display to the LCD will be enabled. +Z* The keys in "keybd" are checked against the magic +Z* keycommands defined in the environment. +Z* See also key_match(). + * +D* Design: wd@denx.de +C* Coding: wd@denx.de +V* Verification: dzu@denx.de + ***********************************************************************/ +int misc_init_r_kbd (void) +{ + uchar kbd_data[KEYBD_DATALEN]; + char keybd_env[2 * KEYBD_DATALEN + 1]; + uchar kbd_init_status = gd->arch.kbd_status >> 8; + uchar kbd_status = gd->arch.kbd_status; + uchar val; + ushort data, inv_data; + char *str; + int i; + + if (kbd_init_status) { + printf ("KEYBD: Error %02X\n", kbd_init_status); + } + if (kbd_status) { /* permanent error, report it */ + printf ("*** Keyboard error code %02X ***\n", kbd_status); + sprintf (keybd_env, "%02X", kbd_status); + setenv ("keybd", keybd_env); + return 0; + } + + /* + * Now we know that we have a working keyboard, so disable + * all output to the LCD except when a key press is detected. + */ + + if ((console_assign (stdout, "serial") < 0) || + (console_assign (stderr, "serial") < 0)) { + printf ("Can't assign serial port as output device\n"); + } + + /* Read Version */ + val = KEYBD_CMD_READ_VERSION; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_VERSIONLEN); + printf ("KEYBD: Version %d.%d\n", kbd_data[0], kbd_data[1]); + + /* Read current keyboard state */ + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + /* read out start key from bse01 received via can */ + _dspic_read(DSPIC_PON_STATUS_REG, &data); + /* check highbyte from status register */ + if (data > 0xFF) { + _dspic_read(DSPIC_PON_INV_STATUS_REG, &inv_data); + + /* check inverse data */ + if ((data+inv_data) == 0xFFFF) { + /* don't overwrite local key */ + if (kbd_data[1] == 0) { + /* read key value */ + _dspic_read(DSPIC_PON_KEY_REG, &data); + str = (char *)&data; + /* swap bytes */ + kbd_data[1] = str[1]; + kbd_data[2] = str[0]; + printf("CAN received startkey: 0x%X\n", data); + } + } + } + + for (i = 0; i < KEYBD_DATALEN; ++i) { + sprintf (keybd_env + i + i, "%02X", kbd_data[i]); + } + + setenv ("keybd", keybd_env); + + str = strdup ((char *)key_match (kbd_data)); /* decode keys */ +#ifdef KEYBD_SET_DEBUGMODE + if (kbd_data[0] == KEYBD_SET_DEBUGMODE) { /* set debug mode */ + if ((console_assign (stdout, "lcd") < 0) || + (console_assign (stderr, "lcd") < 0)) { + printf ("Can't assign LCD display as output device\n"); + } + } +#endif /* KEYBD_SET_DEBUGMODE */ +#ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */ + setenv ("preboot", str); /* set or delete definition */ +#endif /* CONFIG_PREBOOT */ + if (str != NULL) { + free (str); + } + return (0); +} + +#ifdef CONFIG_PREBOOT + +static uchar kbd_magic_prefix[] = "key_magic"; +static uchar kbd_command_prefix[] = "key_cmd"; + +static int compare_magic (uchar *kbd_data, uchar *str) +{ + uchar compare[KEYBD_DATALEN-1]; + char *nxt; + int i; + + /* Don't include modifier byte */ + memcpy (compare, kbd_data+1, KEYBD_DATALEN-1); + + for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) { + uchar c; + int k; + + c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16); + + if (str == (uchar *)nxt) { /* invalid character */ + break; + } + + /* + * Check if this key matches the input. + * Set matches to zero, so they match only once + * and we can find duplicates or extra keys + */ + for (k = 0; k < sizeof(compare); ++k) { + if (compare[k] == '\0') /* only non-zero entries */ + continue; + if (c == compare[k]) { /* found matching key */ + compare[k] = '\0'; + break; + } + } + if (k == sizeof(compare)) { + return -1; /* unmatched key */ + } + } + + /* + * A full match leaves no keys in the `compare' array, + */ + for (i = 0; i < sizeof(compare); ++i) { + if (compare[i]) + { + return -1; + } + } + + return 0; +} + +/*********************************************************************** +F* Function: static uchar *key_match (uchar *kbd_data) P*A*Z* + * +P* Parameters: uchar *kbd_data +P* - The keys to match against our magic definitions +P* +P* Returnvalue: uchar * +P* - != NULL: Pointer to the corresponding command(s) +P* NULL: No magic is about to happen + * +Z* Intention: Check if pressed key(s) match magic sequence, +Z* and return the command string associated with that key(s). +Z* +Z* If no key press was decoded, NULL is returned. +Z* +Z* Note: the first character of the argument will be +Z* overwritten with the "magic charcter code" of the +Z* decoded key(s), or '\0'. +Z* +Z* Note: the string points to static environment data +Z* and must be saved before you call any function that +Z* modifies the environment. + * +D* Design: wd@denx.de +C* Coding: wd@denx.de +V* Verification: dzu@denx.de + ***********************************************************************/ +static uchar *key_match (uchar *kbd_data) +{ + char magic[sizeof (kbd_magic_prefix) + 1]; + uchar *suffix; + char *kbd_magic_keys; + + /* + * The following string defines the characters that can pe appended + * to "key_magic" to form the names of environment variables that + * hold "magic" key codes, i. e. such key codes that can cause + * pre-boot actions. If the string is empty (""), then only + * "key_magic" is checked (old behaviour); the string "125" causes + * checks for "key_magic1", "key_magic2" and "key_magic5", etc. + */ + if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) + kbd_magic_keys = ""; + + /* loop over all magic keys; + * use '\0' suffix in case of empty string + */ + for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) { + sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); + debug ("### Check magic \"%s\"\n", magic); + if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) { + char cmd_name[sizeof (kbd_command_prefix) + 1]; + char *cmd; + + sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); + + cmd = getenv (cmd_name); + debug ("### Set PREBOOT to $(%s): \"%s\"\n", + cmd_name, cmd ? cmd : "<<NULL>>"); + *kbd_data = *suffix; + return ((uchar *)cmd); + } + } + debug ("### Delete PREBOOT\n"); + *kbd_data = '\0'; + return (NULL); +} +#endif /* CONFIG_PREBOOT */ + +/*********************************************************************** +F* Function: int do_kbd (cmd_tbl_t *cmdtp, int flag, +F* int argc, char * const argv[]) P*A*Z* + * +P* Parameters: cmd_tbl_t *cmdtp +P* - Pointer to our command table entry +P* int flag +P* - If the CMD_FLAG_REPEAT bit is set, then this call is +P* a repetition +P* int argc +P* - Argument count +P* char * const argv[] +P* - Array of the actual arguments +P* +P* Returnvalue: int +P* - 0 is always returned. + * +Z* Intention: Implement the "kbd" command. +Z* The keyboard status is read. The result is printed on +Z* the console and written into the "keybd" environment +Z* variable. + * +D* Design: wd@denx.de +C* Coding: wd@denx.de +V* Verification: dzu@denx.de + ***********************************************************************/ +int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + uchar kbd_data[KEYBD_DATALEN]; + char keybd_env[2 * KEYBD_DATALEN + 1]; + uchar val; + int i; + +#if 0 /* Done in kbd_init */ + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif + + /* Read keys */ + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + puts ("Keys:"); + for (i = 0; i < KEYBD_DATALEN; ++i) { + sprintf (keybd_env + i + i, "%02X", kbd_data[i]); + printf (" %02x", kbd_data[i]); + } + putc ('\n'); + setenv ("keybd", keybd_env); + return 0; +} + +U_BOOT_CMD( + kbd, 1, 1, do_kbd, + "read keyboard status", + "" +); + +/*----------------------------- Utilities -----------------------------*/ + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + uchar kbd_data[KEYBD_DATALEN]; + uchar val; + + /* Read keys */ + val = KEYBD_CMD_READ_KEYS; + i2c_write (kbd_addr, 0, 0, &val, 1); + i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); + + return (compare_magic(kbd_data, (uchar *)CONFIG_POST_KEY_MAGIC) == 0); +} +#endif diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c new file mode 100644 index 0000000000..8ad6712841 --- /dev/null +++ b/board/lwmon5/lwmon5.c @@ -0,0 +1,550 @@ +/* + * (C) Copyright 2007-2013 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <asm/ppc440.h> +#include <asm/processor.h> +#include <asm/ppc4xx-gpio.h> +#include <asm/io.h> +#include <post.h> +#include <flash.h> +#include <mtd/cfi_flash.h> + +DECLARE_GLOBAL_DATA_PTR; + +static phys_addr_t lwmon5_cfi_flash_bank_addr[2] = CONFIG_SYS_FLASH_BANKS_LIST; + +ulong flash_get_size(ulong base, int banknum); +int misc_init_r_kbd(void); + +int board_early_init_f(void) +{ + u32 sdr0_pfc1, sdr0_pfc2; + u32 reg; + + /* PLB Write pipelining disabled. Denali Core workaround */ + mtdcr(PLB4A0_ACR, 0xDE000000); + mtdcr(PLB4A1_ACR, 0xDE000000); + + /*-------------------------------------------------------------------- + * Setup the interrupt controller polarities, triggers, etc. + *-------------------------------------------------------------------*/ + mtdcr(UIC0SR, 0xffffffff); /* clear all. if write with 1 then the status is cleared */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000000); /* we have not critical interrupts at the moment */ + mtdcr(UIC0PR, 0xFFBFF1EF); /* Adjustment of the polarity */ + mtdcr(UIC0TR, 0x00000900); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xFFFFC6A5); /* Adjustment of the polarity */ + mtdcr(UIC1TR, 0x60000040); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + mtdcr(UIC2ER, 0x00000000); /* disable all */ + mtdcr(UIC2CR, 0x00000000); /* all non-critical */ + mtdcr(UIC2PR, 0x27C00000); /* Adjustment of the polarity */ + mtdcr(UIC2TR, 0x3C000000); /* per ref-board manual */ + mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + + /* Trace Pins are disabled. SDR0_PFC0 Register */ + mtsdr(SDR0_PFC0, 0x0); + + /* select Ethernet pins */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + /* SMII via ZMII */ + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | + SDR0_PFC1_SELECT_CONFIG_6; + mfsdr(SDR0_PFC2, sdr0_pfc2); + sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | + SDR0_PFC2_SELECT_CONFIG_6; + + /* enable SPI (SCP) */ + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL; + + mtsdr(SDR0_PFC2, sdr0_pfc2); + mtsdr(SDR0_PFC1, sdr0_pfc1); + + mtsdr(SDR0_PFC4, 0x80000000); + + /* PCI arbiter disabled */ + /* PCI Host Configuration disbaled */ + mfsdr(SDR0_PCI0, reg); + reg = 0; + mtsdr(SDR0_PCI0, 0x00000000 | reg); + + gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1); + +#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1 + /* enable the LSB transmitter */ + gpio_write_bit(CONFIG_SYS_GPIO_LSB_ENABLE, 1); + /* enable the CAN transmitter */ + gpio_write_bit(CONFIG_SYS_GPIO_CAN_ENABLE, 1); + + reg = 0; /* reuse as counter */ + out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR, + in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) + & ~CONFIG_SYS_DSPIC_TEST_MASK); + while (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) { + udelay(1000); + } + if (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY)) { + /* set "boot error" flag */ + out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR, + in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) | + CONFIG_SYS_DSPIC_TEST_MASK); + } +#endif + + /* + * Reset PHY's: + * The PHY's need a 2nd reset pulse, since the MDIO address is latched + * upon reset, and with the first reset upon powerup, the addresses are + * not latched reliable, since the IRQ line is multiplexed with an + * MDIO address. A 2nd reset at this time will make sure, that the + * correct address is latched. + */ + gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1); + gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1); + udelay(1000); + gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 0); + gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 0); + udelay(1000); + gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1); + gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1); + + return 0; +} + +/* + * Override weak default with board specific version + */ +phys_addr_t cfi_flash_bank_addr(int bank) +{ + return lwmon5_cfi_flash_bank_addr[bank]; +} + +/* + * Override the weak default mapping function with a board specific one + */ +u32 flash_get_bank_size(int cs, int idx) +{ + return flash_info[idx].size; +} + +int board_early_init_r(void) +{ + u32 val0, val1; + + /* + * lwmon5 is manufactured in 2 different board versions: + * The lwmon5a board has 64MiB NOR flash instead of the + * 128MiB of the original lwmon5. Unfortunately the CFI driver + * will report 2 banks of 64MiB even for the smaller flash + * chip, since the bank is mirrored. To fix this, we bring + * one bank into CFI query mode and read its response. This + * enables us to detect the real number of flash devices/ + * banks which will be used later on by the common CFI driver. + */ + + /* Put bank 0 into CFI command mode and read */ + out_be32((void *)CONFIG_SYS_FLASH0, 0x00980098); + val0 = in_be32((void *)CONFIG_SYS_FLASH0 + FLASH_OFFSET_CFI_RESP); + val1 = in_be32((void *)CONFIG_SYS_FLASH1 + FLASH_OFFSET_CFI_RESP); + + /* Reset flash again out of query mode */ + out_be32((void *)CONFIG_SYS_FLASH0, 0x00f000f0); + + /* When not identical, we have 2 different flash devices/banks */ + if (val0 != val1) + return 0; + + /* + * Now we're sure that we're running on a LWMON5a board with + * only 64MiB NOR flash in one bank: + * + * Set flash base address and bank count for CFI driver probing. + */ + cfi_flash_num_flash_banks = 1; + lwmon5_cfi_flash_bank_addr[0] = CONFIG_SYS_FLASH0; + + return 0; +} + +int misc_init_r(void) +{ + u32 pbcr; + int size_val = 0; + u32 reg; + unsigned long usb2d0cr = 0; + unsigned long usb2phy0cr, usb2h0cr = 0; + unsigned long sdr0_pfc1, sdr0_srst; + + /* + * FLASH stuff... + */ + + /* Re-do sizing to get full correct info */ + + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + + mfebc(PB0CR, pbcr); + size_val = ffs(gd->bd->bi_flashsize) - 21; + pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); + mtebc(PB0CR, pbcr); + + /* + * Re-check to get correct base address + */ + flash_get_size(gd->bd->bi_flashstart, 0); + + /* Monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, -CONFIG_SYS_MONITOR_LEN, 0xffffffff, + &flash_info[cfi_flash_num_flash_banks - 1]); + + /* Env protection ON by default */ + flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, + CONFIG_ENV_ADDR_REDUND + 2 * CONFIG_ENV_SECT_SIZE - 1, + &flash_info[cfi_flash_num_flash_banks - 1]); + + /* + * USB suff... + */ + + /* Reset USB */ + /* Reset of USB2PHY0 must be active at least 10 us */ + mtsdr(SDR0_SRST0, SDR0_SRST0_USB2H | SDR0_SRST0_USB2D); + udelay(2000); + + mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY | SDR0_SRST1_USB2HUTMI | + SDR0_SRST1_USB2HPHY | SDR0_SRST1_OPBA2 | + SDR0_SRST1_PLB42OPB1 | SDR0_SRST1_OPB2PLB40); + udelay(2000); + + /* Errata CHIP_6 */ + + /* 1. Set internal PHY configuration */ + /* SDR Setting */ + mfsdr(SDR0_PFC1, sdr0_pfc1); + mfsdr(SDR0_USB0, usb2d0cr); + mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mfsdr(SDR0_USB2H0CR, usb2h0cr); + + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ + + /* + * An 8-bit/60MHz interface is the only possible alternative + * when connecting the Device to the PHY + */ + usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK; + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/ + + mtsdr(SDR0_PFC1, sdr0_pfc1); + mtsdr(SDR0_USB0, usb2d0cr); + mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); + mtsdr(SDR0_USB2H0CR, usb2h0cr); + + /* 2. De-assert internal PHY reset */ + mfsdr(SDR0_SRST1, sdr0_srst); + sdr0_srst = sdr0_srst & ~SDR0_SRST1_USB20PHY; + mtsdr(SDR0_SRST1, sdr0_srst); + + /* 3. Wait for more than 1 ms */ + udelay(2000); + + /* 4. De-assert USB 2.0 Host main reset */ + mfsdr(SDR0_SRST0, sdr0_srst); + sdr0_srst = sdr0_srst &~ SDR0_SRST0_USB2H; + mtsdr(SDR0_SRST0, sdr0_srst); + udelay(1000); + + /* 5. De-assert reset of OPB2 cores */ + mfsdr(SDR0_SRST1, sdr0_srst); + sdr0_srst = sdr0_srst &~ SDR0_SRST1_PLB42OPB1; + sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPB2PLB40; + sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPBA2; + mtsdr(SDR0_SRST1, sdr0_srst); + udelay(1000); + + /* 6. Set EHCI Configure FLAG */ + + /* 7. Reassert internal PHY reset: */ + mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY); + udelay(1000); + + /* + * Clear resets + */ + mtsdr(SDR0_SRST1, 0x00000000); + mtsdr(SDR0_SRST0, 0x00000000); + + printf("USB: Host(int phy) Device(ext phy)\n"); + + /* + * Clear PLB4A0_ACR[WRP] + * This fix will make the MAL burst disabling patch for the Linux + * EMAC driver obsolete. + */ + reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK; + mtdcr(PLB4A0_ACR, reg); + + /* + * Init matrix keyboard + */ + misc_init_r_kbd(); + + return 0; +} + +int checkboard(void) +{ + char buf[64]; + int i = getenv_f("serial#", buf, sizeof(buf)); + + printf("Board: %s", __stringify(CONFIG_HOSTNAME)); + + if (i > 0) { + puts(", serial# "); + puts(buf); + } + putc('\n'); + + return (0); +} + +void hw_watchdog_reset(void) +{ + int val; +#if defined(CONFIG_WD_MAX_RATE) + unsigned long long ct = get_ticks(); + + /* + * Don't allow watch-dog triggering more frequently than + * the predefined value CONFIG_WD_MAX_RATE [ticks]. + */ + if (ct >= gd->arch.wdt_last) { + if ((ct - gd->arch.wdt_last) < CONFIG_WD_MAX_RATE) + return; + } else { + /* Time base counter had been reset */ + if (((unsigned long long)(-1) - gd->arch.wdt_last + ct) < + CONFIG_WD_MAX_RATE) + return; + } + gd->arch.wdt_last = get_ticks(); +#endif + + /* + * Toggle watchdog output + */ + val = gpio_read_out_bit(CONFIG_SYS_GPIO_WATCHDOG) == 0 ? 1 : 0; + gpio_write_bit(CONFIG_SYS_GPIO_WATCHDOG, val); +} + +int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if (argc < 2) + return cmd_usage(cmdtp); + + if ((strcmp(argv[1], "on") == 0)) + gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1); + else if ((strcmp(argv[1], "off") == 0)) + gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0); + else + return cmd_usage(cmdtp); + + return 0; +} + +U_BOOT_CMD( + eepromwp, 2, 0, do_eeprom_wp, + "eeprom write protect off/on", + "<on|off> - enable (on) or disable (off) I2C EEPROM write protect" +); + +#if defined(CONFIG_VIDEO) +#include <video_fb.h> +#include <mb862xx.h> + +extern GraphicDevice mb862xx; + +static const gdc_regs init_regs [] = { + { 0x0100, 0x00000f00 }, + { 0x0020, 0x801401df }, + { 0x0024, 0x00000000 }, + { 0x0028, 0x00000000 }, + { 0x002c, 0x00000000 }, + { 0x0110, 0x00000000 }, + { 0x0114, 0x00000000 }, + { 0x0118, 0x01df0280 }, + { 0x0004, 0x031f0000 }, + { 0x0008, 0x027f027f }, + { 0x000c, 0x015f028f }, + { 0x0010, 0x020c0000 }, + { 0x0014, 0x01df01ea }, + { 0x0018, 0x00000000 }, + { 0x001c, 0x01e00280 }, + { 0x0100, 0x80010f00 }, + { 0x0, 0x0 } +}; + +const gdc_regs *board_get_regs(void) +{ + return init_regs; +} + +/* Returns Lime base address */ +unsigned int board_video_init(void) +{ + /* + * Reset Lime controller + */ + gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1); + udelay(500); + gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1); + + mb862xx.winSizeX = 640; + mb862xx.winSizeY = 480; + mb862xx.gdfBytesPP = 2; + mb862xx.gdfIndex = GDF_15BIT_555RGB; + + return CONFIG_SYS_LIME_BASE_0; +} + +#define DEFAULT_BRIGHTNESS 0x64 + +static void board_backlight_brightness(int brightness) +{ + if (brightness > 0) { + /* pwm duty, lamp on */ + out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), brightness); + out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x701); + } else { + /* lamp off */ + out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), 0x00); + out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x00); + } +} + +void board_backlight_switch(int flag) +{ + char * param; + int rc; + + if (flag) { + param = getenv("brightness"); + rc = param ? simple_strtol(param, NULL, 10) : -1; + if (rc < 0) + rc = DEFAULT_BRIGHTNESS; + } else { + rc = 0; + } + board_backlight_brightness(rc); +} + +#if defined(CONFIG_CONSOLE_EXTRA_INFO) +/* + * Return text to be printed besides the logo. + */ +void video_get_info_str(int line_number, char *info) +{ + if (line_number == 1) + strcpy(info, " Board: Lwmon5 (Liebherr Elektronik GmbH)"); + else + info [0] = '\0'; +} +#endif /* CONFIG_CONSOLE_EXTRA_INFO */ +#endif /* CONFIG_VIDEO */ + +void board_reset(void) +{ + gpio_write_bit(CONFIG_SYS_GPIO_BOARD_RESET, 1); +} + +#ifdef CONFIG_SPL_OS_BOOT +/* + * lwmon5 specific implementation of spl_start_uboot() + * + * RETURN + * 0 if booting into OS is selected (default) + * 1 if booting into U-Boot is selected + */ +int spl_start_uboot(void) +{ + char s[8]; + + env_init(); + getenv_f("boot_os", s, sizeof(s)); + if ((s != NULL) && (strcmp(s, "yes") == 0)) + return 0; + + return 1; +} + +/* + * This function is called from the SPL U-Boot version for + * early init stuff, that needs to be done for OS (e.g. Linux) + * booting. Doing it later in the real U-Boot would not work + * in case that the SPL U-Boot boots Linux directly. + */ +void spl_board_init(void) +{ + const gdc_regs *regs = board_get_regs(); + + /* + * Setup PFC registers, mainly for ethernet support + * later on in Linux + */ + board_early_init_f(); + + /* enable the LSB transmitter */ + gpio_write_bit(CONFIG_SYS_GPIO_LSB_ENABLE, 1); + + /* + * Clear resets + */ + mtsdr(SDR0_SRST1, 0x00000000); + mtsdr(SDR0_SRST0, 0x00000000); + + /* + * Reset Lime controller + */ + gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1); + udelay(500); + gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1); + + out_be32((void *)CONFIG_SYS_LIME_SDRAM_CLOCK, CONFIG_SYS_MB862xx_CCF); + udelay(300); + out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_MB862xx_MMR); + + while (regs->index) { + out_be32((void *)(CONFIG_SYS_LIME_BASE_0 + GC_DISP_BASE) + + regs->index, regs->value); + regs++; + } + + board_backlight_brightness(DEFAULT_BRIGHTNESS); +} +#endif diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c new file mode 100644 index 0000000000..bcb344940b --- /dev/null +++ b/board/lwmon5/sdram.c @@ -0,0 +1,245 @@ +/* + * (C) Copyright 2006 + * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com + * + * (C) Copyright 2007-2013 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + +#include <common.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/io.h> +#include <asm/cache.h> +#include <asm/ppc440.h> +#include <watchdog.h> + +/* + * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory + * region. Right now the cache should still be disabled in U-Boot because of the + * EMAC driver, that need it's buffer descriptor to be located in non cached + * memory. + * + * If at some time this restriction doesn't apply anymore, just define + * CONFIG_4xx_DCACHE in the board config file and this code should setup + * everything correctly. + */ +#ifdef CONFIG_4xx_DCACHE +#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */ +#else +#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ +#endif + +/*-----------------------------------------------------------------------------+ + * Prototypes + *-----------------------------------------------------------------------------*/ +extern int denali_wait_for_dlllock(void); +extern void denali_core_search_data_eye(void); +extern void dcbz_area(u32 start_address, u32 num_bytes); + +static u32 is_ecc_enabled(void) +{ + u32 val; + + mfsdram(DDR0_22, val); + val &= DDR0_22_CTRL_RAW_MASK; + if (val) + return 1; + else + return 0; +} + +void board_add_ram_info(int use_default) +{ + PPC4xx_SYS_INFO board_cfg; + u32 val; + + if (is_ecc_enabled()) + puts(" (ECC"); + else + puts(" (ECC not"); + + get_sys_info(&board_cfg); + printf(" enabled, %ld MHz", (board_cfg.freqPLB * 2) / 1000000); + + mfsdram(DDR0_03, val); + val = DDR0_03_CASLAT_DECODE(val); + printf(", CL%d)", val); +} + +#ifdef CONFIG_DDR_ECC +static void wait_ddr_idle(void) +{ + /* + * Controller idle status cannot be determined for Denali + * DDR2 code. Just return here. + */ +} + +static void program_ecc(u32 start_address, + u32 num_bytes, + u32 tlb_word2_i_value) +{ + u32 val; + u32 current_addr = start_address; + u32 size; + int bytes_remaining; + + sync(); + wait_ddr_idle(); + + /* + * Because of 440EPx errata CHIP 11, we don't touch the last 256 + * bytes of SDRAM. + */ + bytes_remaining = num_bytes - CONFIG_SYS_MEM_TOP_HIDE; + + /* + * We have to write the ECC bytes by zeroing and flushing in smaller + * steps, since the whole 256MByte takes too long for the external + * watchdog. + */ + while (bytes_remaining > 0) { + size = min((64 << 20), bytes_remaining); + + /* Write zero's to SDRAM */ + dcbz_area(current_addr, size); + + /* Write modified dcache lines back to memory */ + clean_dcache_range(current_addr, current_addr + size); + + current_addr += 64 << 20; + bytes_remaining -= 64 << 20; + WATCHDOG_RESET(); + } + + sync(); + wait_ddr_idle(); + + /* Clear error status */ + mfsdram(DDR0_00, val); + mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); + + /* Set 'int_mask' parameter to functionnal value */ + mfsdram(DDR0_01, val); + mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF)); + + sync(); + wait_ddr_idle(); +} +#endif + +/************************************************************************* + * + * initdram -- 440EPx's DDR controller is a DENALI Core + * + ************************************************************************/ +phys_size_t initdram (int board_type) +{ + /* CL=4 */ + mtsdram(DDR0_02, 0x00000000); + + mtsdram(DDR0_00, 0x0000190A); + mtsdram(DDR0_01, 0x01000000); + mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */ + + mtsdram(DDR0_04, 0x0B030300); + mtsdram(DDR0_05, 0x02020308); + mtsdram(DDR0_06, 0x0003C812); + mtsdram(DDR0_07, 0x00090100); + mtsdram(DDR0_08, 0x03c80001); + mtsdram(DDR0_09, 0x00011D5F); + mtsdram(DDR0_10, 0x00000100); + mtsdram(DDR0_11, 0x000CC800); + mtsdram(DDR0_12, 0x00000003); + mtsdram(DDR0_14, 0x00000000); + mtsdram(DDR0_17, 0x1e000000); + mtsdram(DDR0_18, 0x1e1e1e1e); + mtsdram(DDR0_19, 0x1e1e1e1e); + mtsdram(DDR0_20, 0x0B0B0B0B); + mtsdram(DDR0_21, 0x0B0B0B0B); +#ifdef CONFIG_DDR_ECC + mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */ +#else + mtsdram(DDR0_22, 0x00267F0B); +#endif + + mtsdram(DDR0_23, 0x01000000); + mtsdram(DDR0_24, 0x01010001); + + mtsdram(DDR0_26, 0x2D93028A); + mtsdram(DDR0_27, 0x0784682B); + + mtsdram(DDR0_28, 0x00000080); + mtsdram(DDR0_31, 0x00000000); + mtsdram(DDR0_42, 0x01000008); + + mtsdram(DDR0_43, 0x050A0200); + mtsdram(DDR0_44, 0x00000005); + mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */ + + denali_wait_for_dlllock(); + +#if defined(CONFIG_DDR_DATA_EYE) + /* -----------------------------------------------------------+ + * Perform data eye search if requested. + * ----------------------------------------------------------*/ + program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20, + TLB_WORD2_I_ENABLE); + denali_core_search_data_eye(); + remove_tlb(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20); +#endif + + /* + * Program tlb entries for this size (dynamic) + */ + program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20, + MY_TLB_WORD2_I_ENABLE); + +#if defined(CONFIG_DDR_ECC) +#if defined(CONFIG_4xx_DCACHE) + /* + * If ECC is enabled, initialize the parity bits. + */ + program_ecc(0, CONFIG_SYS_MBYTES_SDRAM << 20, 0); +#else /* CONFIG_4xx_DCACHE */ + /* + * Setup 2nd TLB with same physical address but different virtual address + * with cache enabled. This is done for fast ECC generation. + */ + program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0); + + /* + * If ECC is enabled, initialize the parity bits. + */ + program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0); + + /* + * Now after initialization (auto-calibration and ECC generation) + * remove the TLB entries with caches enabled and program again with + * desired cache functionality + */ + remove_tlb(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20); +#endif /* CONFIG_4xx_DCACHE */ +#endif /* CONFIG_DDR_ECC */ + + /* + * Clear possible errors resulting from data-eye-search. + * If not done, then we could get an interrupt later on when + * exceptions are enabled. + */ + set_mcsr(get_mcsr()); + + return (CONFIG_SYS_MBYTES_SDRAM << 20); +} diff --git a/board/matrix_vision/mvblx/Kconfig b/board/matrix_vision/mvblx/Kconfig deleted file mode 100644 index adbc20a934..0000000000 --- a/board/matrix_vision/mvblx/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OMAP3_MVBLX - -config SYS_BOARD - default "mvblx" - -config SYS_VENDOR - default "matrix_vision" - -config SYS_CONFIG_NAME - default "omap3_mvblx" - -endif diff --git a/board/matrix_vision/mvblx/MAINTAINERS b/board/matrix_vision/mvblx/MAINTAINERS deleted file mode 100644 index 2f9a1532cb..0000000000 --- a/board/matrix_vision/mvblx/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MVBLX BOARD -M: Michael Jones <michael.jones@matrix-vision.de> -S: Maintained -F: board/matrix_vision/mvblx/ -F: include/configs/omap3_mvblx.h -F: configs/omap3_mvblx_defconfig diff --git a/board/matrix_vision/mvblx/Makefile b/board/matrix_vision/mvblx/Makefile deleted file mode 100644 index c056ebaf78..0000000000 --- a/board/matrix_vision/mvblx/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mvblx.o fpga.o -obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o - -ccflags-y += -Werror diff --git a/board/matrix_vision/mvblx/config.mk b/board/matrix_vision/mvblx/config.mk deleted file mode 100644 index de13072dab..0000000000 --- a/board/matrix_vision/mvblx/config.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# (C) Copyright 2006 -# Texas Instruments, <www.ti.com> -# -# Beagle Board uses OMAP3 (ARM-CortexA8) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Physical Address: -# 8000'0000 (bank0) -# A000/0000 (bank1) -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) - -# For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x80008000 diff --git a/board/matrix_vision/mvblx/fpga.c b/board/matrix_vision/mvblx/fpga.c deleted file mode 100644 index 7f9b245505..0000000000 --- a/board/matrix_vision/mvblx/fpga.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * (C) Copyright 2002 - * Rich Ireland, Enterasys Networks, rireland@enterasys.com. - * Keith Outwater, keith_outwater@mvis.com. - * - * (C) Copyright 2011 - * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de - * Michael Jones, Matrix Vision GmbH, michael.jones@matrix-vision.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <ACEX1K.h> -#include <command.h> -#include <asm/gpio.h> -#include <linux/byteorder/generic.h> -#include "fpga.h" - -#ifdef FPGA_DEBUG -#define fpga_debug(fmt, args...) printf("%s: "fmt, __func__, ##args) -#else -#define fpga_debug(fmt, args...) -#endif - -Altera_CYC2_Passive_Serial_fns altera_fns = { - fpga_null_fn, /* Altera_pre_fn */ - fpga_config_fn, - fpga_status_fn, - fpga_done_fn, - fpga_wr_fn, - fpga_null_fn, - fpga_null_fn, -}; - -Altera_desc cyclone2 = { - Altera_CYC2, - fast_passive_parallel, - Altera_EP3C5_SIZE, - (void *) &altera_fns, - NULL, - 0 -}; - -#define GPIO_RESET 43 -#define GPIO_DCLK 65 -#define GPIO_nSTATUS 157 -#define GPIO_CONF_DONE 158 -#define GPIO_nCONFIG 159 -#define GPIO_DATA0 54 -#define GPIO_DATA1 55 -#define GPIO_DATA2 56 -#define GPIO_DATA3 57 -#define GPIO_DATA4 58 -#define GPIO_DATA5 60 -#define GPIO_DATA6 61 -#define GPIO_DATA7 62 - -DECLARE_GLOBAL_DATA_PTR; - -/* return FPGA_SUCCESS on success, else FPGA_FAIL - */ -int mvblx_init_fpga(void) -{ - fpga_debug("Initializing FPGA interface\n"); - fpga_init(); - fpga_add(fpga_altera, &cyclone2); - - if (gpio_request(GPIO_DCLK, "dclk") || - gpio_request(GPIO_nSTATUS, "nStatus") || -#ifndef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE - gpio_request(GPIO_CONF_DONE, "conf_done") || -#endif - gpio_request(GPIO_nCONFIG, "nConfig") || - gpio_request(GPIO_DATA0, "data0") || - gpio_request(GPIO_DATA1, "data1") || - gpio_request(GPIO_DATA2, "data2") || - gpio_request(GPIO_DATA3, "data3") || - gpio_request(GPIO_DATA4, "data4") || - gpio_request(GPIO_DATA5, "data5") || - gpio_request(GPIO_DATA6, "data6") || - gpio_request(GPIO_DATA7, "data7")) { - printf("%s: error requesting GPIOs.", __func__); - return FPGA_FAIL; - } - - /* set up outputs */ - gpio_direction_output(GPIO_DCLK, 0); - gpio_direction_output(GPIO_nCONFIG, 0); - gpio_direction_output(GPIO_DATA0, 0); - gpio_direction_output(GPIO_DATA1, 0); - gpio_direction_output(GPIO_DATA2, 0); - gpio_direction_output(GPIO_DATA3, 0); - gpio_direction_output(GPIO_DATA4, 0); - gpio_direction_output(GPIO_DATA5, 0); - gpio_direction_output(GPIO_DATA6, 0); - gpio_direction_output(GPIO_DATA7, 0); - - /* NB omap_free_gpio() resets to an input, so we can't - * free ie. nCONFIG, or else the FPGA would reset - * Q: presumably gpio_free() has the same effect? - */ - - /* set up inputs */ - gpio_direction_input(GPIO_nSTATUS); -#ifndef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE - gpio_direction_input(GPIO_CONF_DONE); -#endif - - fpga_config_fn(0, 1, 0); - udelay(60); - - return FPGA_SUCCESS; -} - -int fpga_null_fn(int cookie) -{ - return 0; -} - -int fpga_config_fn(int assert, int flush, int cookie) -{ - fpga_debug("SET config : %s=%d\n", assert ? "low" : "high", assert); - if (flush) { - gpio_set_value(GPIO_nCONFIG, !assert); - udelay(1); - gpio_set_value(GPIO_nCONFIG, assert); - } - - return assert; -} - -int fpga_done_fn(int cookie) -{ - int result = 0; - - /* since revA of BLX, we will not get this signal. */ - udelay(10); -#ifdef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE - fpga_debug("not waiting for CONF_DONE."); - result = 1; -#else - fpga_debug("CONF_DONE check ... "); - if (gpio_get_value(GPIO_CONF_DONE)) { - fpga_debug("high\n"); - result = 1; - } else - fpga_debug("low\n"); - gpio_free(GPIO_CONF_DONE); -#endif - - return result; -} - -int fpga_status_fn(int cookie) -{ - int result = 0; - fpga_debug("STATUS check ... "); - - result = gpio_get_value(GPIO_nSTATUS); - - if (result < 0) - fpga_debug("error\n"); - else if (result > 0) - fpga_debug("high\n"); - else - fpga_debug("low\n"); - - return result; -} - -static inline int _write_fpga(u8 byte) -{ - gpio_set_value(GPIO_DATA0, byte & 0x01); - gpio_set_value(GPIO_DATA1, (byte >> 1) & 0x01); - gpio_set_value(GPIO_DATA2, (byte >> 2) & 0x01); - gpio_set_value(GPIO_DATA3, (byte >> 3) & 0x01); - gpio_set_value(GPIO_DATA4, (byte >> 4) & 0x01); - gpio_set_value(GPIO_DATA5, (byte >> 5) & 0x01); - gpio_set_value(GPIO_DATA6, (byte >> 6) & 0x01); - gpio_set_value(GPIO_DATA7, (byte >> 7) & 0x01); - - /* clock */ - gpio_set_value(GPIO_DCLK, 1); - udelay(1); - gpio_set_value(GPIO_DCLK, 0); - udelay(1); - - return 0; -} - -int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie) -{ - unsigned char *data = (unsigned char *) buf; - int i; - int headerlen = len - cyclone2.size; - - if (headerlen < 0) - return FPGA_FAIL; - else if (headerlen == sizeof(uint32_t)) { - const unsigned int fpgavers_len = 11; /* '0x' + 8 hex digits + \0 */ - char fpgavers_str[fpgavers_len]; - snprintf(fpgavers_str, fpgavers_len, "0x%08x", - be32_to_cpup((uint32_t*)data)); - setenv("fpgavers", fpgavers_str); - } - - fpga_debug("fpga_wr: buf %p / size %d\n", buf, len); - for (i = headerlen; i < len; i++) - _write_fpga(data[i]); - fpga_debug("-%s\n", __func__); - - return FPGA_SUCCESS; -} diff --git a/board/matrix_vision/mvblx/fpga.h b/board/matrix_vision/mvblx/fpga.h deleted file mode 100644 index 411b039c01..0000000000 --- a/board/matrix_vision/mvblx/fpga.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * (C) Copyright 2002 - * Rich Ireland, Enterasys Networks, rireland@enterasys.com. - * Keith Outwater, keith_outwater@mvis.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -extern int mvblx_init_fpga(void); - -extern int fpga_status_fn(int cookie); -extern int fpga_config_fn(int assert, int flush, int cookie); -extern int fpga_done_fn(int cookie); -extern int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie); -extern int fpga_null_fn(int cookie); diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c deleted file mode 100644 index c9d615b79a..0000000000 --- a/board/matrix_vision/mvblx/mvblx.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * MATRIX VISION GmbH mvBlueLYNX-X - * - * Derived from Beagle and Overo - * - * (C) Copyright 2004-2008 - * Texas Instruments, <www.ti.com> - * - * Author : - * Sunil Kumar <sunilsaini05@gmail.com> - * Shashi Ranjan <shashiranjanmca05@gmail.com> - * - * Derived from Beagle Board and 3430 SDP code by - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <khasim@ti.com> - * - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <netdev.h> -#include <twl4030.h> -#include <asm/io.h> -#include <asm/arch/mem.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/gpio.h> -#include <asm/mach-types.h> -#include "mvblx.h" -#include "fpga.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) -static void setup_net_chip(void); -#endif /* CONFIG_CMD_NET */ - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -/* - * Routine: misc_init_r - * Description: Configure board specific parts - */ -int misc_init_r(void) -{ - printf("mvBlueLYNX-X\n"); - if (get_cpu_family() == CPU_OMAP36XX) - setenv("mpurate", "1000"); - else - setenv("mpurate", "600"); - - twl4030_power_init(); - -#if defined(CONFIG_CMD_NET) - setup_net_chip(); -#endif /* CONFIG_CMD_NET */ - - mvblx_init_fpga(); - - mac_read_from_eeprom(); - - dieid_num_r(); - - return 0; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - MUX_MVBLX(); -} - -#ifdef CONFIG_GENERIC_MMC -int board_mmc_init(bd_t *bis) -{ - omap_mmc_init(0, 0, 0, -1, -1); - omap_mmc_init(1, 0, 0, -1, -1); - return 0; -} - -void board_mmc_power_init(void) -{ - twl4030_power_mmc_init(0); - twl4030_power_mmc_init(1); -} -#endif - -#if defined(CONFIG_CMD_NET) -/* - * Routine: setup_net_chip - * Description: Setting up the configuration GPMC registers specific to the - * Ethernet hardware. - */ -static void setup_net_chip(void) -{ - struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - - /* Configure GPMC registers */ - writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[0].config1); - writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[0].config2); - writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[0].config3); - writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[0].config4); - writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[0].config5); - writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[0].config6); - writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[0].config7); - - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ - writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, - &ctrl_base->gpmc_nadv_ale); - - /* Make GPIO 139 as output pin */ - writel(readl(&gpio5_base->oe) & ~(GPIO11), &gpio5_base->oe); - - /* Now send a pulse on the GPIO pin */ - writel(GPIO11, &gpio5_base->setdataout); - udelay(1); - writel(GPIO11, &gpio5_base->cleardataout); - udelay(1); - writel(GPIO11, &gpio5_base->setdataout); -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} - -int overwrite_console(void) -{ - /* return true if console should be overwritten */ - return 0; -} - -#endif /* CONFIG_CMD_NET */ diff --git a/board/matrix_vision/mvblx/mvblx.h b/board/matrix_vision/mvblx/mvblx.h deleted file mode 100644 index 6c1c752e48..0000000000 --- a/board/matrix_vision/mvblx/mvblx.h +++ /dev/null @@ -1,346 +0,0 @@ -/* - * (C) Copyright 2008 - * Dirk Behme <dirk.behme@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef _MVBLX_H_ -#define _MVBLX_H_ - -#include <asm/arch/sys_proto.h> - -const omap3_sysinfo sysinfo = { - DDR_DISCRETE, - "OMAP3 mvBlueLYNX-X camera", - "no NAND", -}; - -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_MVBLX() \ - /*SDRC*/\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ - /*GPMC*/\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M4)) /*GPIO_41*/\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M4)) /*GPIO_42*/\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M4)) /*GPIO_43*/\ - MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\ - MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\ - MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\ - MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\ - MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\ - MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\ - MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\ - MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\ - MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\ - MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\ - MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\ - MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\ - MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\ - MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\ - MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\ - MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\ - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ - MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ - MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) /*GPIO54*/\ - MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M4)) /*GPIO55*/\ - MUX_VAL(CP(GPMC_NCS5), (IEN | PTU | EN | M4)) /*GPIO56*/\ - MUX_VAL(CP(GPMC_NCS6), (IEN | PTU | EN | M4)) /*GPIO57*/\ - MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M4)) /*GPIO58*/\ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) /*GPMC_CLK*/\ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ - MUX_VAL(CP(GPMC_NBE0_CLE), (IEN | PTU | EN | M4)) /*GPIO60*/\ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M4)) /*GPIO61*/\ - MUX_VAL(CP(GPMC_NWP), (IEN | PTU | EN | M4)) /*GPIO62*/\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ - MUX_VAL(CP(GPMC_WAIT3), (IDIS | PTU | EN | M4)) /*GPIO65*/\ - /*DSS*/\ - MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ - MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ - MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ - MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ - MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ - MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ - MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ - MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ - MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ - MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ - MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ - MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ - MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ - MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ - MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M3)) /*DSS_DATA0*/\ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M3)) /*DSS_DATA1*/\ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M3)) /*DSS_DATA2*/\ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M3)) /*DSS_DATA3*/\ - MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M3)) /*DSS_DATA4*/\ - MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M3)) /*DSS_DATA5*/\ - /*CAMERA*/\ - MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ - MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ - MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ - MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ - MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ - MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ - MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ - MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ - MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ - MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ - MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ - MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ - MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ - MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ - MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ - MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ - MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ - MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ - /*Audio Interface */\ - MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ - MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ - MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ - MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ - /*Expansion card 1*/\ - MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ - MUX_VAL(CP(MMC1_DAT4), (IDIS | PTU | DIS | M4)) /*GPIO_?*/\ - MUX_VAL(CP(MMC1_DAT5), (IDIS | PTU | DIS | M4)) /*GPIO_?*/\ - MUX_VAL(CP(MMC1_DAT6), (IDIS | PTU | DIS | M4)) /*GPIO_?*/\ - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | DIS | M7)) /*GPIO_129 disabled*/\ - /*Expansion card 2 */\ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | DIS | M0)) /*MMC2_CLK*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | DIS | M0)) /*MMC2_CMD*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | DIS | M0)) /*MMC2_DAT0*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | DIS | M0)) /*MMC2_DAT1*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | DIS | M0)) /*MMC2_DAT2*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | DIS | M0)) /*MMC2_DAT3*/\ - MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | DIS | M4)) /*GPIO_136*/\ - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ - MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | DIS | M4)) /*GPIO_138*/\ - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ - /*Bluetooth*/\ - MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M1)) /*UART2_CTS*/\ - MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ - MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\ - MUX_VAL(CP(MCBSP3_FSX), (IDIS | PTD | DIS | M1)) /*UART2_RX*/\ - /*Modem Interface */\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ - MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \ - MUX_VAL(CP(UART1_CTS), (IEN | PTU | EN | M4)) /*GPIO_150*/ \ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ - MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ - MUX_VAL(CP(MCBSP1_FSR), (IEN | PTU | EN | M4)) /*GPIO_157*/\ - MUX_VAL(CP(MCBSP1_DX), (IEN | PTU | DIS | M4)) /*GPIO_158 1-wire */\ - MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ - MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ - MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ - MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ - /*Serial Interface*/\ - MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\ - MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ - MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ - MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ - MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ - MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ - MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ - MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ - MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ - MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ - MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ - MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ - MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ - MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ - MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ - MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ - MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ - MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ - MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ - MUX_VAL(CP(MCSPI1_CLK), (IDIS | PTU | DIS | M4)) /*GPIO_171*/\ - MUX_VAL(CP(MCSPI1_SIMO), (IDIS | PTU | DIS | M4)) /*GPIO_172*/\ - MUX_VAL(CP(MCSPI1_SOMI), (IDIS | PTU | DIS | M4)) /*GPIO_173*/\ - MUX_VAL(CP(MCSPI1_CS0), (IDIS | PTD | DIS | M4)) /*GPIO_174*/\ - MUX_VAL(CP(MCSPI1_CS3), (IDIS | PTU | DIS | M4)) /*GPIO_177*/\ - /* USB EHCI (port 2) not used */\ - MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) /*McSPI2_CLK*/\ - MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) /*McSPI2_SIMO*/\ - MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) /*McSPI2_SOMI*/\ - MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)) /*McSPI2_CS0*/\ - MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) /*McSPI2_CS1*/\ - /*Control and debug */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ - MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ - MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ - MUX_VAL(CP(SYS_BOOT0), (IDIS | PTD | DIS | M3)) /*DSS_DATA18*/\ - MUX_VAL(CP(SYS_BOOT1), (IDIS | PTD | DIS | M3)) /*DSS_DATA19*/\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M0)) /*GPIO_4*/\ - MUX_VAL(CP(SYS_BOOT3), (IDIS | PTD | DIS | M3)) /*DSS_DATA20*/\ - MUX_VAL(CP(SYS_BOOT4), (IDIS | PTD | DIS | M3)) /*DSS_DATA21*/\ - MUX_VAL(CP(SYS_BOOT5), (IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\ - MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M3)) /*DSS_DATA23*/ \ - MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ - MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M4)) /*GPIO_10*/\ - MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT2*/\ - /* USB EHCI (port 1) */\ - MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\ - MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\ - MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA0*/\ - MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA1*/\ - MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA2*/\ - MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA7*/\ - MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA4*/\ - MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA5*/\ - MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA6*/\ - MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA3*/\ - MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\ - MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\ - MUX_VAL(CP(ETK_D10_ES2), (IEN | PTU | EN | M4)) /*GPIO_24*/\ - MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M4)) /*GPIO_25*/\ - MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M4)) /*GPIO_26*/\ - MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M4)) /*GPIO_27*/\ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M4)) /*GPIO_28*/\ - MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M4)) /*GPIO_29*/\ - /*Die to Die */\ - MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ - MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ - MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ - MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ - MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ - MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ - MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ - MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ - MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ - MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ - MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ - MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ - MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ - MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ - MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ - MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ - MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ - MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ - MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ - MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ - MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ - MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ - MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ - MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ - MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ - MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ - MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ - MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ - MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ - MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ - MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ - MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ - MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ - MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ - MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ - MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ - MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\ - MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ - MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\ - MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\ - MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ - MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ - MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ - MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\ - MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\ - MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\ - MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\ - MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\ - MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ - MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ - MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ - MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ - MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\ - MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ - MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\ - MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\ - MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\ - MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ - MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ - MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ - MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ - MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ - MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ - -#endif diff --git a/board/matrix_vision/mvblx/sys_eeprom.c b/board/matrix_vision/mvblx/sys_eeprom.c deleted file mode 100644 index db42987010..0000000000 --- a/board/matrix_vision/mvblx/sys_eeprom.c +++ /dev/null @@ -1,403 +0,0 @@ -/* - * Copyright 2006, 2008-2009, 2011 Freescale Semiconductor - * York Sun (yorksun@freescale.com) - * Haiying Wang (haiying.wang@freescale.com) - * Timur Tabi (timur@freescale.com) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <i2c.h> - -/* #define DEBUG */ - -/* - * static eeprom: EEPROM layout - */ -static struct __attribute__ ((__packed__)) eeprom { - u8 id[16]; /* 0x01 - 0x0F Type e.g. 100wG-5111 */ - u8 sn[10]; /* 0x10 - 0x19 Serial Number */ - u8 date[6]; /* 0x1A - 0x1F Build Date */ - u8 mac[6]; /* 0x20 - 0x25 MAC address */ - u8 reserved[10];/* 0x26 - 0x2f reserved */ - u32 crc; /* x+1 CRC32 checksum */ -} e; - -/* Set to 1 if we've read EEPROM into memory */ -static int has_been_read; - -/** - * show_eeprom - display the contents of the EEPROM - */ -static void show_eeprom(void) -{ - unsigned int crc; - char safe_string[16]; - -#ifdef DEBUG - int i; -#endif - u8 *p; - - /* ID */ - strncpy(safe_string, (char *)e.id, sizeof(e.id)); - safe_string[sizeof(e.id)-1] = 0; - printf("ID: mvBlueLYNX-X%s\n", safe_string); - - /* Serial number */ - strncpy(safe_string, (char *)e.sn, sizeof(e.sn)); - safe_string[sizeof(e.sn)-1] = 0; - printf("SN: %s\n", safe_string); - - /* Build date, BCD date values, as YYMMDDhhmmss */ - printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n", - e.date[0], e.date[1], e.date[2], - e.date[3] & 0x7F, e.date[4], e.date[5], - e.date[3] & 0x80 ? "PM" : ""); - - /* Show MAC address */ - p = e.mac; - printf("Eth: %02x:%02x:%02x:%02x:%02x:%02x\n", - p[0], p[1], p[2], p[3], p[4], p[5]); - - crc = crc32(0, (void *)&e, sizeof(e) - 4); - - if (crc == be32_to_cpu(e.crc)) - printf("CRC: %08x\n", be32_to_cpu(e.crc)); - else - printf("CRC: %08x (should be %08x)\n", be32_to_cpu(e.crc), crc); - -#ifdef DEBUG - printf("EEPROM dump: (0x%x bytes)\n", sizeof(e)); - for (i = 0; i < sizeof(e); i++) { - if ((i % 16) == 0) - printf("%02X: ", i); - printf("%02X ", ((u8 *)&e)[i]); - if (((i % 16) == 15) || (i == sizeof(e) - 1)) - printf("\n"); - } -#endif -} - -/** - * read_eeprom - read the EEPROM into memory - */ -static int read_eeprom(void) -{ - int ret; -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - unsigned int bus; -#endif - - if (has_been_read) - return 0; - -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - bus = i2c_get_bus_num(); - i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); -#endif - - ret = eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - (uchar *)&e, sizeof(e)); - -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - i2c_set_bus_num(bus); -#endif - -#ifdef DEBUG - show_eeprom(); -#endif - - has_been_read = (ret == 0) ? 1 : 0; - - return ret; -} - -/** - * update_crc - update the CRC - * - * This function should be called after each update to the EEPROM structure, - * to make sure the CRC is always correct. - */ -static void update_crc(void) -{ - u32 crc; - - crc = crc32(0, (void *)&e, sizeof(e) - 4); - e.crc = cpu_to_be32(crc); -} - -/** - * prog_eeprom - write the EEPROM from memory - */ -static int prog_eeprom(void) -{ - int ret = 0; -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - unsigned int bus; -#endif - - update_crc(); - -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - bus = i2c_get_bus_num(); - i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); -#endif - - ret = eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - (uchar *)&e, sizeof(e)); - - if (!ret) { - /* Verify the write by reading back the EEPROM and comparing */ - struct eeprom e2; -#ifdef DEBUG - printf("%s verifying...\n", __func__); -#endif - ret = eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - (uchar *)&e2, sizeof(e2)); - - if (!ret && memcmp(&e, &e2, sizeof(e))) - ret = -1; - } - -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - i2c_set_bus_num(bus); -#endif - - if (ret) { - printf("Programming failed.\n"); - has_been_read = 0; - return -1; - } - - printf("Programming passed.\n"); - return 0; -} - -/** - * h2i - converts hex character into a number - * - * This function takes a hexadecimal character (e.g. '7' or 'C') and returns - * the integer equivalent. - */ -static inline u8 h2i(char p) -{ - if ((p >= '0') && (p <= '9')) - return p - '0'; - - if ((p >= 'A') && (p <= 'F')) - return (p - 'A') + 10; - - if ((p >= 'a') && (p <= 'f')) - return (p - 'a') + 10; - - return 0; -} - -/** - * set_date - stores the build date into the EEPROM - * - * This function takes a pointer to a string in the format "YYMMDDhhmmss" - * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string, - * and stores it in the build date field of the EEPROM local copy. - */ -static void set_date(const char *string) -{ - unsigned int i; - - if (strlen(string) != 12) { - printf("Usage: mac date YYMMDDhhmmss\n"); - return; - } - - for (i = 0; i < 6; i++) - e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]); - - update_crc(); -} - -/** - * set_mac_address - stores a MAC address into the EEPROM - * - * This function takes a pointer to MAC address string - * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and - * stores it in the MAC address field in the EEPROM local copy. - */ -static void set_mac_address(const char *string) -{ - char *p = (char *) string; - unsigned int i; - - for (i = 0; *p && (i < 6); i++) { - e.mac[i] = simple_strtoul(p, &p, 16); - if (*p == ':') - p++; - } - - update_crc(); -} - -int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - char cmd; - - if (argc == 1) { - show_eeprom(); - return 0; - } - - cmd = argv[1][0]; - - if (cmd == 'r') { -#ifdef DEBUG - printf("%s read\n", __func__); -#endif - read_eeprom(); - return 0; - } - - if (argc == 2) { - switch (cmd) { - case 's': /* save */ -#ifdef DEBUG - printf("%s save\n", __func__); -#endif - prog_eeprom(); - break; - default: - return cmd_usage(cmdtp); - } - - return 0; - } - - /* We know we have at least one parameter */ - - switch (cmd) { - case 'n': /* serial number */ -#ifdef DEBUG - printf("%s serial number\n", __func__); -#endif - memset(e.sn, 0, sizeof(e.sn)); - strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1); - update_crc(); - break; - case 'd': /* date BCD format YYMMDDhhmmss */ - set_date(argv[2]); - break; - case 'e': /* errata */ - printf("mac errata not implemented\n"); - break; - case 'i': /* id */ - memset(e.id, 0, sizeof(e.id)); - strncpy((char *)e.id, argv[2], sizeof(e.id) - 1); - update_crc(); - break; - case 'p': /* ports */ - printf("mac ports not implemented (always 1 port)\n"); - break; - case '0' ... '9': - /* we only have "mac 0" but any digit can be used here */ - set_mac_address(argv[2]); - break; - case 'h': /* help */ - default: - return cmd_usage(cmdtp); - } - - return 0; -} - -static inline int is_portrait(void) -{ - int i; - unsigned int orient_index = 0; /* idx of char which determines orientation */ - - for (i = sizeof(e.id)/sizeof(*e.id) - 1; i>=0; i--) { - if (e.id[i] == '-') { - orient_index = i+1; - break; - } - } - - return (orient_index && - (e.id[orient_index] >= '5') && (e.id[orient_index] <= '8')); -} - -int mac_read_from_eeprom(void) -{ - u32 crc, crc_offset = offsetof(struct eeprom, crc); - u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */ -#define FILENAME_LANDSCAPE "mvBlueLynx_X.rbf" -#define FILENAME_PORTRAIT "mvBlueLynx_X_sensor_cd.rbf" - - if (read_eeprom()) { - printf("EEPROM Read failed.\n"); - return -1; - } - - crc = crc32(0, (void *)&e, crc_offset); - crcp = (void *)&e + crc_offset; - if (crc != be32_to_cpu(*crcp)) { - printf("EEPROM CRC mismatch (%08x != %08x)\n", crc, - be32_to_cpu(e.crc)); - return -1; - } - - if (memcmp(&e.mac, "\0\0\0\0\0\0", 6) && - memcmp(&e.mac, "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { - char ethaddr[18]; - - sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", - e.mac[0], - e.mac[1], - e.mac[2], - e.mac[3], - e.mac[4], - e.mac[5]); - /* Only initialize environment variables that are blank - * (i.e. have not yet been set) - */ - if (!getenv("ethaddr")) - setenv("ethaddr", ethaddr); - } - - if (memcmp(&e.sn, "\0\0\0\0\0\0\0\0\0\0", 10) && - memcmp(&e.sn, "\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF", 10)) { - char serial_num[12]; - - strncpy(serial_num, (char *)e.sn, sizeof(e.sn) - 1); - /* Only initialize environment variables that are blank - * (i.e. have not yet been set) - */ - if (!getenv("serial#")) - setenv("serial#", serial_num); - } - - /* decide which fpga file to load depending on orientation */ - if (is_portrait()) - setenv("fpgafilename", FILENAME_PORTRAIT); - else - setenv("fpgafilename", FILENAME_LANDSCAPE); - - /* TODO should I calculate CRC here? */ - return 0; -} - -#ifdef CONFIG_SERIAL_TAG -void get_board_serial(struct tag_serialnr *serialnr) -{ - char *serial = getenv("serial#"); - - if (serial && (strlen(serial) > 3)) { - /* use the numerical part of the serial number LXnnnnnn */ - serialnr->high = 0; - serialnr->low = simple_strtoul(serial + 2, NULL, 10); - } else { - serialnr->high = 0; - serialnr->low = 0; - } -} -#endif diff --git a/board/nvidia/p2371-2180/Kconfig b/board/nvidia/p2371-2180/Kconfig new file mode 100644 index 0000000000..8622bdaa16 --- /dev/null +++ b/board/nvidia/p2371-2180/Kconfig @@ -0,0 +1,12 @@ +if TARGET_P2371_2180 + +config SYS_BOARD + default "p2371-2180" + +config SYS_VENDOR + default "nvidia" + +config SYS_CONFIG_NAME + default "p2371-2180" + +endif diff --git a/board/nvidia/p2371-2180/MAINTAINERS b/board/nvidia/p2371-2180/MAINTAINERS new file mode 100644 index 0000000000..815377490c --- /dev/null +++ b/board/nvidia/p2371-2180/MAINTAINERS @@ -0,0 +1,6 @@ +P2371-2180 BOARD +M: Tom Warren <twarren@nvidia.com> +S: Maintained +F: board/nvidia/p2371-2180/ +F: include/configs/p2371-2180.h +F: configs/p2371-2180_defconfig diff --git a/board/nvidia/p2371-2180/Makefile b/board/nvidia/p2371-2180/Makefile new file mode 100644 index 0000000000..10aefb071e --- /dev/null +++ b/board/nvidia/p2371-2180/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2013-2015 +# NVIDIA Corporation <www.nvidia.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += p2371-2180.o diff --git a/board/nvidia/p2371-2180/p2371-2180.c b/board/nvidia/p2371-2180/p2371-2180.c new file mode 100644 index 0000000000..cf2dd0b14f --- /dev/null +++ b/board/nvidia/p2371-2180/p2371-2180.c @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include "../p2571/max77620_init.h" +#include "pinmux-config-p2371-2180.h" + +void pin_mux_mmc(void) +{ + struct udevice *dev; + uchar val; + int ret; + + /* Turn on MAX77620 LDO2 to 3.3V for SD card power */ + debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__); + ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev); + if (ret) { + printf("%s: Cannot find MAX77620 I2C chip\n", __func__); + return; + } + /* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */ + val = 0xF2; + ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1); + if (ret) + printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret); +} + +/* + * Routine: pinmux_init + * Description: Do individual peripheral pinmux configs + */ +void pinmux_init(void) +{ + pinmux_clear_tristate_input_clamping(); + + gpio_config_table(p2371_2180_gpio_inits, + ARRAY_SIZE(p2371_2180_gpio_inits)); + + pinmux_config_pingrp_table(p2371_2180_pingrps, + ARRAY_SIZE(p2371_2180_pingrps)); + + pinmux_config_drvgrp_table(p2371_2180_drvgrps, + ARRAY_SIZE(p2371_2180_drvgrps)); +} diff --git a/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h b/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h new file mode 100644 index 0000000000..d5be6ecda9 --- /dev/null +++ b/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h @@ -0,0 +1,279 @@ +/* + * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * THIS FILE IS AUTO-GENERATED - DO NOT EDIT! + * + * To generate this file, use the tegra-pinmux-scripts tool available from + * https://github.com/NVIDIA/tegra-pinmux-scripts + * Run "board-to-uboot.py p2371-2180". + */ + +#ifndef _PINMUX_CONFIG_P2371_2180_H_ +#define _PINMUX_CONFIG_P2371_2180_H_ + +#define GPIO_INIT(_gpio, _init) \ + { \ + .gpio = GPIO_P##_gpio, \ + .init = TEGRA_GPIO_INIT_##_init, \ + } + +static const struct tegra_gpio_config p2371_2180_gpio_inits[] = { + /* gpio, init_val */ + GPIO_INIT(A5, IN), + GPIO_INIT(B0, IN), + GPIO_INIT(B1, IN), + GPIO_INIT(B2, IN), + GPIO_INIT(B3, IN), + GPIO_INIT(C0, IN), + GPIO_INIT(C1, IN), + GPIO_INIT(C2, IN), + GPIO_INIT(C3, IN), + GPIO_INIT(C4, IN), + GPIO_INIT(E4, IN), + GPIO_INIT(E5, IN), + GPIO_INIT(E6, IN), + GPIO_INIT(H0, OUT0), + GPIO_INIT(H1, OUT0), + GPIO_INIT(H2, IN), + GPIO_INIT(H3, OUT0), + GPIO_INIT(H4, OUT0), + GPIO_INIT(H5, IN), + GPIO_INIT(H6, IN), + GPIO_INIT(H7, IN), + GPIO_INIT(I0, OUT0), + GPIO_INIT(I1, IN), + GPIO_INIT(I2, OUT0), + GPIO_INIT(K4, IN), + GPIO_INIT(K5, OUT0), + GPIO_INIT(K6, IN), + GPIO_INIT(K7, IN), + GPIO_INIT(L1, IN), + GPIO_INIT(S4, OUT0), + GPIO_INIT(S5, OUT0), + GPIO_INIT(S6, OUT0), + GPIO_INIT(S7, OUT0), + GPIO_INIT(T0, OUT0), + GPIO_INIT(T1, OUT0), + GPIO_INIT(U2, IN), + GPIO_INIT(U3, IN), + GPIO_INIT(V1, OUT0), + GPIO_INIT(V2, OUT0), + GPIO_INIT(V3, IN), + GPIO_INIT(V5, OUT0), + GPIO_INIT(V6, OUT0), + GPIO_INIT(X0, IN), + GPIO_INIT(X1, IN), + GPIO_INIT(X2, IN), + GPIO_INIT(X3, IN), + GPIO_INIT(X4, IN), + GPIO_INIT(X5, IN), + GPIO_INIT(X6, IN), + GPIO_INIT(X7, IN), + GPIO_INIT(Y0, IN), + GPIO_INIT(Y1, IN), + GPIO_INIT(Z0, IN), + GPIO_INIT(Z2, IN), + GPIO_INIT(Z3, OUT0), + GPIO_INIT(BB0, IN), + GPIO_INIT(BB2, OUT0), + GPIO_INIT(BB3, IN), + GPIO_INIT(CC1, IN), +}; + +#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _e_io_hv) \ + { \ + .pingrp = PMUX_PINGRP_##_pingrp, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .od = PMUX_PIN_OD_##_od, \ + .e_io_hv = PMUX_PIN_E_IO_HV_##_e_io_hv, \ + .lock = PMUX_PIN_LOCK_DEFAULT, \ + } + +static const struct pmux_pingrp_config p2371_2180_pingrps[] = { + /* pingrp, mux, pull, tri, e_input, od, e_io_hv */ + PINCFG(PEX_L0_RST_N_PA0, PE0, NORMAL, NORMAL, OUTPUT, DISABLE, HIGH), + PINCFG(PEX_L0_CLKREQ_N_PA1, PE0, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(PEX_WAKE_N_PA2, PE, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(PEX_L1_RST_N_PA3, PE1, NORMAL, NORMAL, OUTPUT, DISABLE, HIGH), + PINCFG(PEX_L1_CLKREQ_N_PA4, PE1, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(SATA_LED_ACTIVE_PA5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PA6, SATA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(DAP1_FS_PB0, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP1_DIN_PB1, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP1_DOUT_PB2, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP1_SCLK_PB3, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI2_MOSI_PB4, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI2_MISO_PB5, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI2_SCK_PB6, SPI2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI2_CS0_PB7, SPI2, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI1_MOSI_PC0, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI1_MISO_PC1, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI1_SCK_PC2, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI1_CS0_PC3, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI1_CS1_PC4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI4_SCK_PC5, SPI4, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI4_CS0_PC6, SPI4, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI4_MOSI_PC7, SPI4, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SPI4_MISO_PD0, SPI4, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(UART3_TX_PD1, UARTC, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART3_RX_PD2, UARTC, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(UART3_RTS_PD3, UARTC, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART3_CTS_PD4, UARTC, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC1_CLK_PE0, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC1_DAT_PE1, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC2_CLK_PE2, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC2_DAT_PE3, I2S3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC3_CLK_PE4, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DMIC3_DAT_PE5, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PE6, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PE7, PWM3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(GEN3_I2C_SCL_PF0, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(GEN3_I2C_SDA_PF1, I2C3, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(UART2_TX_PG0, UARTB, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART2_RX_PG1, UARTB, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(UART2_RTS_PG2, UARTB, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART2_CTS_PG3, UARTB, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(WIFI_EN_PH0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(WIFI_RST_PH1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(WIFI_WAKE_AP_PH2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(AP_WAKE_BT_PH3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(BT_RST_PH4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(BT_WAKE_AP_PH5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PH6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(AP_WAKE_NFC_PH7, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(NFC_EN_PI0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(NFC_INT_PI1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(GPS_EN_PI2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(GPS_RST_PI3, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART4_TX_PI4, UARTD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART4_RX_PI5, UARTD, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(UART4_RTS_PI6, UARTD, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART4_CTS_PI7, UARTD, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(GEN1_I2C_SDA_PJ0, I2C1, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(GEN1_I2C_SCL_PJ1, I2C1, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(GEN2_I2C_SCL_PJ2, I2C2, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(GEN2_I2C_SDA_PJ3, I2C2, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(DAP4_FS_PJ4, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP4_DIN_PJ5, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP4_DOUT_PJ6, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP4_SCLK_PJ7, I2S4B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PK0, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PK1, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PK2, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PK3, I2S5B, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PK4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PK5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(PK6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PK7, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PL0, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PL1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_CLK_PM0, SDMMC1, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_CMD_PM1, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_DAT3_PM2, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_DAT2_PM3, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_DAT1_PM4, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC1_DAT0_PM5, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_CLK_PP0, SDMMC3, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_CMD_PP1, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_DAT3_PP2, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_DAT2_PP3, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_DAT1_PP4, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(SDMMC3_DAT0_PP5, SDMMC3, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(CAM1_MCLK_PS0, EXTPERIPH3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM2_MCLK_PS1, EXTPERIPH3, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM_I2C_SCL_PS2, I2CVI, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(CAM_I2C_SDA_PS3, I2CVI, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(CAM_RST_PS4, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM_AF_EN_PS5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM_FLASH_EN_PS6, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM1_PWDN_PS7, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM2_PWDN_PT0, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(CAM1_STROBE_PT1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART1_TX_PU0, UARTA, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(UART1_RX_PU1, UARTA, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(UART1_RTS_PU2, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(UART1_CTS_PU3, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(LCD_BL_PWM_PV0, PWM0, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(LCD_BL_EN_PV1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(LCD_RST_PV2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(LCD_GPIO1_PV3, DEFAULT, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(LCD_GPIO2_PV4, PWM1, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(AP_READY_PV5, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(TOUCH_RST_PV6, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(TOUCH_CLK_PV7, TOUCH, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(MODEM_WAKE_AP_PX0, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(TOUCH_INT_PX1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(MOTION_INT_PX2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(ALS_PROX_INT_PX3, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(TEMP_ALERT_PX4, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(BUTTON_POWER_ON_PX5, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(BUTTON_VOL_UP_PX6, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(BUTTON_VOL_DOWN_PX7, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(BUTTON_SLIDE_SW_PY0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(BUTTON_HOME_PY1, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(LCD_TE_PY2, DISPLAYA, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PWR_I2C_SCL_PY3, I2CPMU, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(PWR_I2C_SDA_PY4, I2CPMU, NORMAL, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(CLK_32K_OUT_PY5, SOC, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PZ0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PZ1, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PZ2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PZ3, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(PZ4, SDMMC1, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PZ5, SOC, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP2_FS_PAA0, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP2_SCLK_PAA1, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP2_DIN_PAA2, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DAP2_DOUT_PAA3, I2S2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(AUD_MCLK_PBB0, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DVFS_PWM_PBB1, CLDVFS, NORMAL, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(DVFS_CLK_PBB2, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(GPIO_X1_AUD_PBB3, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(GPIO_X3_AUD_PBB4, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(HDMI_CEC_PCC0, CEC, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(HDMI_INT_DP_HPD_PCC1, DEFAULT, DOWN, NORMAL, INPUT, DISABLE, NORMAL), + PINCFG(SPDIF_OUT_PCC2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SPDIF_IN_PCC3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(USB_VBUS_EN0_PCC4, USB, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(USB_VBUS_EN1_PCC5, USB, NORMAL, NORMAL, INPUT, DISABLE, HIGH), + PINCFG(DP_HPD0_PCC6, DP, DOWN, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(PCC7, RSVD0, DOWN, TRISTATE, OUTPUT, DISABLE, NORMAL), + PINCFG(SPI2_CS1_PDD0, SPI2, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(QSPI_SCK_PEE0, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(QSPI_CS_N_PEE1, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(QSPI_IO0_PEE2, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(QSPI_IO1_PEE3, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(QSPI_IO2_PEE4, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(QSPI_IO3_PEE5, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(CORE_PWR_REQ, CORE, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(PWR_INT_N, PMI, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(CLK_32K_IN, CLK, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(JTAG_RTCK, JTAG, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), + PINCFG(CLK_REQ, RSVD1, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(SHUTDOWN, SHUTDOWN, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), +}; + +#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \ + { \ + .drvgrp = PMUX_DRVGRP_##_drvgrp, \ + .slwf = _slwf, \ + .slwr = _slwr, \ + .drvup = _drvup, \ + .drvdn = _drvdn, \ + .lpmd = PMUX_LPMD_##_lpmd, \ + .schmt = PMUX_SCHMT_##_schmt, \ + .hsm = PMUX_HSM_##_hsm, \ + } + +static const struct pmux_drvgrp_config p2371_2180_drvgrps[] = { +}; + +#endif /* PINMUX_CONFIG_P2371_2180_H */ diff --git a/board/palmld/Kconfig b/board/palmld/Kconfig deleted file mode 100644 index 3111295719..0000000000 --- a/board/palmld/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_PALMLD - -config SYS_BOARD - default "palmld" - -config SYS_CONFIG_NAME - default "palmld" - -endif diff --git a/board/palmld/MAINTAINERS b/board/palmld/MAINTAINERS deleted file mode 100644 index 7d21b7b3eb..0000000000 --- a/board/palmld/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PALMLD BOARD -M: Marek Vasut <marek.vasut@gmail.com> -S: Maintained -F: board/palmld/ -F: include/configs/palmld.h -F: configs/palmld_defconfig diff --git a/board/palmld/Makefile b/board/palmld/Makefile deleted file mode 100644 index ea93ca88e2..0000000000 --- a/board/palmld/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Palm LifeDrive Support -# -# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := palmld.o diff --git a/board/palmld/palmld.c b/board/palmld/palmld.c deleted file mode 100644 index fee4dcd7b3..0000000000 --- a/board/palmld/palmld.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Palm LifeDrive Support - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <serial.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init(void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of PalmLD */ - gd->bd->bi_arch_number = MACH_TYPE_PALMLD; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* Set PWM for LCD */ - writel(0x7, PWM_CTRL0); - writel(0x16c, PWM_PERVAL0); - writel(0x11a, PWM_PWDUTY0); - - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) -{ - info->portwidth = FLASH_CFI_16BIT; - info->chipwidth = FLASH_CFI_BY16; - info->interface = FLASH_CFI_X16; - return 1; -} diff --git a/board/palmtc/Kconfig b/board/palmtc/Kconfig deleted file mode 100644 index 3eb7198837..0000000000 --- a/board/palmtc/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_PALMTC - -config SYS_BOARD - default "palmtc" - -config SYS_CONFIG_NAME - default "palmtc" - -endif diff --git a/board/palmtc/MAINTAINERS b/board/palmtc/MAINTAINERS deleted file mode 100644 index 57b6a22e49..0000000000 --- a/board/palmtc/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PALMTC BOARD -M: Marek Vasut <marek.vasut@gmail.com> -S: Maintained -F: board/palmtc/ -F: include/configs/palmtc.h -F: configs/palmtc_defconfig diff --git a/board/palmtc/Makefile b/board/palmtc/Makefile deleted file mode 100644 index b4a682d24d..0000000000 --- a/board/palmtc/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Palm Tungsten|C Support -# -# Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := palmtc.o diff --git a/board/palmtc/palmtc.c b/board/palmtc/palmtc.c deleted file mode 100644 index a6207b44e7..0000000000 --- a/board/palmtc/palmtc.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Palm Tungsten|C Support - * - * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <serial.h> -#include <asm/io.h> -#include <asm/arch/pxa.h> -#include <asm/arch/regs-mmc.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init(void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* Arch number of Palm Tungsten|C */ - gd->bd->bi_arch_number = MACH_TYPE_PALMTC; - - /* Adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* Set PWM for LCD */ - writel(0x5f, PWM_CTRL1); - writel(0x3ff, PWM_PERVAL1); - writel(892, PWM_PWDUTY1); - - return 0; -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} diff --git a/board/palmtreo680/Kconfig b/board/palmtreo680/Kconfig deleted file mode 100644 index b5fdb9a361..0000000000 --- a/board/palmtreo680/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_PALMTREO680 - -config SYS_BOARD - default "palmtreo680" - -config SYS_CONFIG_NAME - default "palmtreo680" - -endif diff --git a/board/palmtreo680/MAINTAINERS b/board/palmtreo680/MAINTAINERS deleted file mode 100644 index b0ff9d0283..0000000000 --- a/board/palmtreo680/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PALMTREO680 BOARD -#M: Mike Dunn <mikedunn@newsguy.com> -S: Orphan (since 2014-06) -F: board/palmtreo680/ -F: include/configs/palmtreo680.h -F: configs/palmtreo680_defconfig diff --git a/board/palmtreo680/Makefile b/board/palmtreo680/Makefile deleted file mode 100644 index 4f79e4bf11..0000000000 --- a/board/palmtreo680/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Palm Treo680 Support -# -# Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com> -# -# This file is released under the terms of GPL v2 and any later version. -# See the file COPYING in the root directory of the source tree for details. - -obj-y := palmtreo680.o diff --git a/board/palmtreo680/README b/board/palmtreo680/README deleted file mode 100644 index c8799c6ab1..0000000000 --- a/board/palmtreo680/README +++ /dev/null @@ -1,563 +0,0 @@ - -README for the Palm Treo 680. - -Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com> - -You may reproduce the contents of this file entirely or in part, but please -credit me by name if you do. Thanks. - - -Intro -===== - -Yes, you can program u-boot onto the flash of your Palm Treo 680 so that u-boot -(then Linux, Android, ...) runs at power-up. This document describes how, and -gives some implementation details on this port of u-boot and describes how the -Treo 680 boots from reset. - -But first, I probably don't need to tell you that after doing this, your phone -will no longer run PalmOS. You *may* be able to later restore your phone to its -original state by creating a backup image of the flash before writing u-boot -(details below), but this is not heavily tested and should not be relied upon. -There is also the possibility that something may go wrong during the process of -programming u-boot, leaving you with a bricked phone. If you follow these -instructions carefully this chance will be minimized, but I do not recommend -that you program u-boot onto a phone that you can not afford to lose, and -certainly not one that contains important data that is not backed up elsewhere. -I AM NOT RESPONSIBLE FOR THE LOSS OF YOUR PHONE. DO THIS AT YOUR OWN RISK. -Having said that, feel free to send me a note cursing me out if something does -go wrong, but please tell me what happened exactly. For that matter, I'd love -to hear from you if you succeed. - - -Details on the SPL -================== - -The docg4 features a 2k region at the start of its address space that interfaces -to the system bus like a NOR flash. This allows the docg4 to function as a boot -ROM. The Treo 680 uses this feature. The contents of this 2k region are -write-protected and can not be reprogrammed. Fortunately, the code it contains -does what we need to do, at least partially. After some essential hardware -initialization (like the SDRAM controller), it runs an IPL (initial program -loader) that copies 128K (no more, no less) from flash to a fixed address in -SDRAM (0xa1700000) and jumps to it. 128K is too small for u-boot, so we use it -to load a u-boot secondary program loader (SPL). But since our SPL only -occupies a little over 1k, we can economize on flash usage by having the IPL -load a portion of u-boot proper as well. We let the IPL load the first 128k of -a concatenated spl + u-boot image, and because the SPL is placed before u-boot -proper, the IPL jumps to the SPL, which copies the portion of u-boot that the -IPL has already loaded to its correct SDRAM address, and then loads the -remainder of u-boot and jumps to it. - - -The docg4's "reliable mode" -=========================== - -This is a special mode of operation of the docg4's integrated controller whereby -consecutive pairs of 2k regions are used in parallel (in some fashion) to store -2k of data. In other words, the normal capacity is halved, but the data -integrity is improved. In this mode, the data is read or written from pages in -even-numbered 2k regions (regions starting at 0x000, 0x1000, 0x2000, ...). The -odd-numbered 2k regions (regions starting at 0x800, 0x1800, 0x2800, ...) are -transparently used in parallel. In reliable mode, the odd-numbered 2k regions -are not meant to be read or written directly. - -Reliable mode is used by the IPL because there is not enough space in its 2k -footprint to implement the BCH ecc algorithm. Data that is read while reliable -mode is enabled must have been written in reliable mode, or the read fails. -However, data written in reliable mode can also be read in normal mode (just not -as reliably), but only from the even-numbered 2k regions; the odd-numbered 2k -regions appear to contain junk, and will generate ecc errors. When the IPL and -SPL read from flash, the odd-numbered 2k regions are explicitly skipped. The -same is true for the flash_u-boot utility when it writes the u-boot image in -reliable mode. - -The docg4 Linux driver supports writing in reliable mode (it is enabled by the -module parameter), but not reading. However, the u-boot docg4_spl driver does -read in reliable mode, in the same fashion as the IPL. - - -Details on the IPL and its data format -====================================== - -Starting from block 5 and counting upward, the IPL will search for and load the -first two blocks it finds that contain a magic number in the oob of the first -page of the block. The contents are loaded to SDRAM starting at address -0xa1700000. After two blocks have been loaded, it jumps to 0xa1700000. The -number of blocks loaded and the load address in SDRAM are hard-coded; only the -flash offset of the blocks can vary at run-time (based on the presence of the -magic number). - -In addition to using the docg4's reliable mode, the IPL expects each 512 byte -page to be written redundantly in the subsequent page. The hardware is capable -of detecting bit errors (but not correcting them), and if a bit error is -detected when a page is read, the page contents are discarded and the subsequent -page is read. - -Reliable mode reduces the capacity of a block by half, and the redundant pages -reduce it by half again. As a result, the normal 256k capacity of a block is -reduced to 64k for the purposes of the IPL/SPL. - -For the sake of simplicity and uniformity, the u-boot SPL mimics the operation -of the IPL, and expects the image to be stored in the same format. - - -Instructions on Programming u-boot to flash -=========================================== - -To program u-boot to your flash, you will need to boot the Linux kernel on your -phone using a PalmOS bootloader such as cocoboot. The details of building and -running Linux on your Treo (cross-compiling, creating a root filesystem, -configuring the kernel, etc) are beyond the scope of this document. The -remainder of this document describes in detail how to program u-boot to the -flash using Linux running on the Treo. - - -Hardware Prerequisites -====================== - -A Palm Treo 680: - (dugh) - -A Palm usb cable: - You'll need this to establish a usbtty console connection to u-boot from a - desktop PC. Currently there is no support in u-boot for the pxa27x keypad - (coming soon), so a serial link must be used for the console. - These cables are still widely available if you don't already have one. - -A Linux desktop PC. - You may be able to use Windows for the u-boot console if you have a usb driver - that is compatible with the Linux usbserial driver, but for programming u-boot - to flash, you'll really want to use a Linux PC. - - -Treo-side Software Prerequisites -================================ - -Linux bootloader for PalmOS: - - Cocoboot is the only one I'm aware of. If you don't already have this, you - can download it from - https://download.enlightenment.org/misc/Illume/Treo-650/2008-11-13/sdcard-base.tar.gz - which is a compressed tar archive of the contents of an sd card containing - cocoboot. Use mkdosfs to create a fat16 filesystem on the first primary - partition of the card, mount the partition, and extract the tar file to it. - You will probably need to edit the cocoboot.conf file to customize the - parameters passed to the kernel. - - -Linux kernel: - - The kernel on the Treo 680 is still a little rough around the edges, and the - official kernel frequently breaks on the Treo :( A development kernel - specifically for the Treo 680 can be found on github: - http://github.com/mike-dunn/linux-treo680 - The master branch of this tree has been tested on the Treo, and I recommend - using this kernel for programming u-boot. As of this writing, there may be a - bug in the docg4 nand flash driver that sometimes causes block erasures to - fail. This has been fixed in the above tree. - - If you choose to use the official kernel, it must contain the docg4 driver that - includes the reliable_mode module parameter. This was a later enhancement to - the driver, and was merged to the kernel as of v3.8. Do not try to use an - earlier kernel that contains the docg4 driver without support for writing in - reliable mode. If you try to program u-boot to flash with the docg4 driver - loaded without the reliable_mode parameter enabled, you *will* brick your - phone! - - For the purpose of programming u-boot to flash, the following options must be - enabled in the Treo kernel's .config: - - CONFIG_MTD=y - CONFIG_MTD_CMDLINE_PARTS=y - CONFIG_MTD_CHAR=y - CONFIG_MTD_NAND_DOCG4=m - - Note that the docg4 nand driver is configured as a module, because we will - want to load and unload it with reliable_mode enabled or disabled as needed. - - You will also need to specify mtd partitions on the kernel command line. In - the instructions that follow, we will assume that the flash blocks to which - u-boot will be programmed are defined by the second partition on the device. - The u-boot config file (include/configs/palmtreo680.h) places the u-boot image - at the start of block 6 (offset 0x180000), which is the first writable - (non-protected) block on the flash (this is also where the PalmOS SPL starts). - The u-boot image occupies four blocks, so to create the u-boot partition, pass - this command line to the kernel: - mtdparts=Msys_Diskonchip_G4:1536k(protected_part)ro,1024k(bootloader_part),-(filesys_part) - This will create three partitions: - protected_part: the first six blocks, which are read-only - bootloader_part: the next four blocks, for the u-boot image - filesys_part: the remainder of the device - The mtdchar kernel device driver will use device nodes /dev/mtd0, /dev/mtd1, - and /dev/mtd2 for these partitions, respectively. Ensure that your root file - system at least has /dev/mtd1 if you are not running udev or mdev. - -Userspace Utilities: - - In addition to everything necessary to provide a useful userspace environment - (busybox is indispensable, of course), you will need the mtd-utils package on - your root filesystem. I use version 1.5.0 of mtd-utils, and I suggest you use - this version as well, or at leat a version very close to this one, as - mtd-utils has tended to be fluid. - - Note that busybox includes a version of mtd-utils. These are deficient and - should not be used. When you run one of these utilities (nanddump, etc), - ensure you are invoking the separate executable from mtd-utils, and not the - one built into busybox. I recommend that you configure busybox with its - mtd-utils disabled to avoid any possibility of confusion. - - You will also need to cross-compile the userspace Linux utility in - tools/palmtreo680/flash_u-boot.c, which we will run on the Treo to perform the - actual write of the u-boot image to flash. This utility links against libmtd - from the mtd-utils package. - - -Desktop PC-side Software Prerequisites -====================================== - -Terminal emulator application: - minicom, kermit, etc. - -Linux kernel: - Compiled with CONFIG_USB_SERIAL enabled. Build this as a module. - - -Recommended (Not directly related to u-boot) -============================================ - -Working directly on the Treo's tiny screen and keypad is difficult and -error-prone. I recommend that you log into the Linux kernel running on your -Treo from your desktop PC using ethernet over usb. The desktop's kernel must be -configured with CONFIG_USB_USBNET, CONFIG_USB_NET_CDCETHER, and -CONFIG_USB_NET_CDC_SUBSET. The Treo's kernel will need CONFIG_USB_ETH, and its -init script will need to start an ssh daemon like dropbear. Note that the usb0 -network interface will not appear on the desktop PC until the Treo kernel's usb -ethernet gadget driver has initialized. You must wait for this to occur (watch -the PC's kernel log) before you can assign usb0 an ip address and log in to the -Treo. If you also build the Treo's kernel with CONFIG_IP_PNP enabled, you can -pass its ip address on the kernel command line, and obviate the need to -initialize the network interface in your init script. - -Having the Palm usb cable connected to the host has the added benefit of keeping -power supplied to your Treo, reducing the drain on the battery. If something -goes wrong while you're programming u-boot to the flash, you will have lots of -time to correct it before the battery dies. - -I have encountered a situation where the kernel is sometimes unable to mount a -root filesystem on the mmc card due to the mmc controller not initializing in -time, (and CONFIG_MMC_UNSAFE_RESUME doesn't seem to help) so I recommend that -you build a minimal root filesystem into the kernel using the kernel's initramfs -feature (CONFIG_BLK_DEV_INITRD). If you want your root filesystem on the mmc -card, your init script can mount and switch_root to the mmc card after a short -sleep. But keep in mind that in this case you won't be able to use an mmc card -to transfer files between your desktop and the Treo once Linux is running. -Another option for transfering files is to mount an nfs filesystem exported by -the desktop PC. For greatest convenience, you can export the root filesystem -itself from your desktop PC and switch_root to it in your init script. This -will work if your initramfs init script contains a loop that waits for you to -initialize the usb0 network interface on the desktop PC; e.g., loop while a ping -to the desktop PC returns an error. After the loop exits, do the nfs mount and -call switch_root. (You can not use the kernel nfsroot feature because the -network will not be up when the kernel expects it to be; i.e., not until you -configure the usb0 interface on the desktop.) Use the nfs 'nolock' option when -mounting to avoid the need to run a portmapper like rpcbind. - - -Preliminaries -============= - -Once Linux is running on your Treo, you may want to perform a few sanity checks -before programming u-boot. These checks will verify my assumptions regarding -all the Treo 680s out there, and also ensure that the flash and mtd-utils are -working correctly. If you are impatient and reckless, you may skip this -section, but see disclaimer at the top of this file! - -Load the docg4 driver: - - $ modprobe docg4 ignore_badblocks=1 reliable_mode=1 - -We tell the driver to use the docg4's "reliable mode" when writing because this -is the format required by the IPL, which runs from power-up and loads the first -portion of u-boot. We must ignore bad blocks because linux mtd uses out-of-band -(oob) bytes to mark bad blocks, which will cause the blocks written by PalmOS to -be misidentified as "bad" by libmtd. - -Check the kernel log to ensure that all's well: - - $ dmesg | tail - <... snip ...> - docg4 docg4: NAND device: 128MiB Diskonchip G4 detected - 3 cmdlinepart partitions found on MTD device Msys_Diskonchip_G4 - Creating 3 MTD partitions on "Msys_Diskonchip_G4": - 0x000000000000-0x000000180000 : "protected_part" - 0x000000180000-0x000000280000 : "bootloader_part" - 0x000000280000-0x000008000000 : "filesys_part" - -Ensure that the partition boundaries are as shown. (If no partitions are shown, -did you remember to pass them to the kernel on the command line?) We will write -u-boot to bootloader_part, which starts at offset 0x180000 (block 6) and spans 4 -256k blocks. This partition is accessed through the device node /dev/mtd1. - -The docg4 contains a read-only table that identifies blocks that were marked as -bad at the factory. This table is in the page at offset 0x2000, which is within -the partition protected_part (/dev/mtd0). There is a slight chance that one or -more of the four blocks that we will use for u-boot is listed in the table, so -use nanddump to inspect the table to see if this is the case: - - $ nanddump -p -l 512 -s 0x2000 -o /dev/mtd0 - ECC failed: 0 - ECC corrected: 0 - Number of bad blocks: 0 - Number of bbt blocks: 0 - Block size 262144, page size 512, OOB size 16 - Dumping data starting at 0x00002000 and ending at 0x00002200... - 0x00002000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff - <... snip ...> - -The format of the table is simple: one bit per block, with block numbers -increasing from left to right, starting with block 0 as the most significant bit -of the first byte. A bit will be clear if the corresponding block is bad. We -want to use blocks 6 throgh 9, so both of the two least significant bits of the -first byte must be set, as must the two most significant bits of the second -byte. If this is not true in your case (you are very unlucky), you should use -the first contiguous set of four good blocks after block 6, and adjust the -partition boundaries accordingly. You will also have to change the value of -CONFIG_SYS_NAND_U_BOOT_OFFS in include/configs/palmtreo680.h and recompile -u-boot. Because the two blocks loaded by the IPL do not have to be contiguous, -but our SPL expects them to be, you will need to erase any good blocks that are -at an offset prior to CONFIG_SYS_NAND_U_BOOT_OFFS, so that the IPL does not find -the magic number in oob and load it. Once you have done all this, the -instructions in this file still apply, except that the instructions below for -restoring the original PalmOS block contents may need to be modified. - -Next, use nanddump to verify that the PalmOS SPL is where we expect it to be. -The SPL can be identified by a magic number in the oob bytes of the first page -of each of the two blocks containing the SPL image. Pages are 512 bytes in -size, so to dump the first page, plus the oob: - - $ nanddump -p -l 512 -s 0 -o /dev/mtd1 - ECC failed: 0 - ECC corrected: 0 - Number of bad blocks: 0 - Number of bbt blocks: 0 - Block size 262144, page size 512, OOB size 16 - Dumping data starting at 0x00000000 and ending at 0x00000200... - 0x00000000: 0a 00 00 ea 00 00 00 00 00 00 00 00 00 00 00 00 - <... snip ...> - 0x000001f0: 13 4c 21 60 13 4d 2a 69 13 4b 29 69 89 1a 99 42 - OOB Data: 42 49 50 4f 30 30 30 10 3a e2 00 92 be a0 11 ff - -Verify that the first seven bytes of oob data match those in the above line. -(This is ASCII "BIPO000".) - -Do the same for the next block: - $ nanddump -p -l 512 -s 0x40000 -o /dev/mtd1 - -The first seven oob bytes in last line should read: - - OOB Data: 42 49 50 4f 30 30 31 81 db 8e 8f 46 07 9b 59 ff - -(This is ASCII "BIPO001".) - -For additional assurance, verify that the next block does *not* contain SPL -data. - - $ nanddump -p -l 512 -s 0x80000 -o /dev/mtd1 - -It doesn't matter what the oob contains, as long as the first four bytes are -*not* ASCII "BIPO". PalmOS should only be using two blocks for the SPL -(although we will need four for u-boot). - -If you want, you can back up the contents of bootloader_part to a file. You may -be able to restore it later, if desired (see "Restoring PalmOS" below). - - $ nanddump -l 0x100000 -s 0 -o -f bootloader_part.orig /dev/mtd1 - -nanddump will spew voluminous warnings about uncorrectable ecc errors. This is -a consequence of reading pages that were written in reliable mode, and is -expected (these should all occur on pages in odd-numbered 2k regions; i.e., -0x800, 0xa00, 0xc00, 0xe00, 0x1800, 0x1a00, ...). The size of the file -bootloader_part.orig should be 1081344, which is 2048 pages, each of size 512 -plus 16 oob bytes. If you are using initramfs for the root filesystem, don't -forget to copy the file to permanent storage, such as an mmc card. - -If all of the above went well, you can now program u-boot. - - -Programming u-boot -================== - -Our u-boot includes a small SPL that must be prepended to u-boot proper. From -the base u-boot source directory on your desktop PC: - - $ cat spl/u-boot-spl.bin u-boot.bin > u-boot-concat.bin - -cd to the tools/palmtreo680/ directory, and cross-compile flash_u-boot.c for the -Treo: - - $(CC) -o flash_u-boot $(CFLAGS) $(INCLUDEPATH) $(LIBPATH) flash_u-boot.c -lmtd - -Substitute variable values from your cross-compilation environment as -appropriate. Note that it links to libmtd from mtd-utils, and this must be -included in $(LIBPATH) and $(INCLUDEPATH). - -Transfer u-boot-concat.bin and the compiled flash_u-boot utility to the Treo's -root filesystem. On the Treo, cd to the directory where these files were -placed. - -Load the docg4 driver if you have not already done so. - - $ modprobe docg4 ignore_badblocks=1 reliable_mode=1 - -Erase the blocks to which we will write u-boot: - - $ flash_erase /dev/mtd1 0x00 4 - -If no errors are reported, write u-boot to the flash: - - $ ./flash_u-boot u-boot-concat.bin /dev/mtd1 - -You can use nanddump (see above) to verify that the data was written. This -time, "BIPO" should be seen in the first four oob bytes of the first page of all -four blocks in /dev/mtd1; i.e., at offsets 0x00000, 0x40000, 0x80000, 0xc0000. - -Shutdown linux, remove and re-insert the battery, hold your breath... - - -Enjoying u-boot -=============== - -After you insert the battery, the u-boot splash screen should appear on the lcd -after a few seconds. With the usb cable connecting the Treo to your PC, in the -kernel log of your PC you should see - - <6>usb 3-1: New USB device found, idVendor=0525, idProduct=a4a6 - <6>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 - <6>usb 3-1: Product: U-Boot 2013.01-00167-gd62ef56-dirty - <6>usb 3-1: Manufacturer: Das U-Boot - -Load the usbserial module on your desktop PC: - - $ modprobe usbserial vendor=0x0525 product=0xa4a6 - -and run your favorite terminal emulation utility (minicom, kermit, etc) with the -serial device set to /dev/ttyUSB0 (assuming this is your only usb serial -device). You should be at the u-boot console (type 'help'). - -There is not much that is unique about using u-boot on the palm treo 680. -Kernels can be loaded from mmc, flash, and from the desktop PC via kermit. You -can expand the size of the second partition on the flash to contain a kernel, or -else put the kernel(s) in their own partition. - -Nand commands work as expected, with the excepton that blocks not written by the -linux mtd subsystem may be misidentified by the u-boot docg4 driver as "bad" if -they contain data in the oob bytes. This will be the case for the blocks -containing the u-boot image, for example. To work around this, use 'nand scrub' -instead of 'nand erase' to erase these blocks, and 'nand read.raw' to read them -to memory. (It would be useful if u-boot's nand commands provided a way to -explicitly ignore "bad" blocks, because read.raw does not perform ecc.) The -'nand dump' command will read these "bad" blocks, however. - -Currently u-boot itself can only be programmed to flash from Linux; there is no -support for reliable mode in u-boot's docg4 flash driver. This should be -corrected soon. - - -Customizing -=========== - -If you change u-boot's configuration significantly (adding or removing -features), you may have to adjust the value of CONFIG_SYS_NAND_U_BOOT_SIZE. -This is the size of the concatenated spl + u-boot image, and tells the SPL how -many flash blocks it needs to load. It will be rounded up to the next 64k -boundary (the spl flash block capacity), so it does not have to be exact, but -you must ensure that it is not less than the actual image size. If it is larger -than the image, blocks may be needlessly loaded, but if too small, u-boot may -only be partially loaded, resulting in a boot failure (bricked phone), so better -to be too large. The flash_u-boot utility will work with any size image and -write the required number of blocks, provided that the partition is large -enough. - -As the first writable block on the device, block 6 seems to make the most sense -as the flash offset for writing u-boot (and this is where PalmOS places its -SPL). But you can place it elsewhere if you like. If you do, you need to -adjust CONFIG_SYS_NAND_U_BOOT_OFFS accordingly, and you must ensure that blocks -preceeding the ones containing u-boot do *not* have the magic number in oob (the -IPL looks for this). In other words, make sure that any blocks that previously -contained the u-boot image or PalmOS SPL are erased (and optionally written with -something else) so that the IPL does not load it. Also make sure that the new -u-boot starting offset is at the start of a flash partition (check the kernel -log after loading the docg4 driver), and pass the corresponding mtd device file -to the flash_u-boot utility. - -The u-boot built-in default environment is used because a writable environment -in flash did not seem worth the cost of a 256k flash block. But adding this -should be straightforward. - - -Restoring PalmOS -================ - -If you backed up the contents of bootloader_part flash partition earlier, you -should be able to restore it with the shell script shown below. The first two -blocks of data contain the PalmOS SPL and were written in reliable mode, whereas -the next two blocks were written in normal mode, so the script has to load and -unload the docg4 driver. Make sure that the mtd-utils nandwrite and flash_erase -are in your path (and are not those from busybox). Also double-check that the -backup image file bootloader_part.orig is exactly 1081344 bytes in length. If -not, it was not backed up correctly. Run the script as: - - ./restore_bootpart bootloader_part.orig /dev/mtd1 - -The script will take a minute or so to run. When it finishes, you may want to -verify with nanddump that the data looks correct before you cycle power, because -if the backup or restore failed, your phone will be bricked. Note that as a -consequence of reliable mode, the odd-numbered 2k regions in the first two -blocks will not exactly match the contents of the backup file, (so unfortunately -we can't simply dump the flash contents to a file and do a binary diff with the -original back-up image to verify that it was restored correctly). Also, -nanddump will report uncorrectable ecc errors when it reads those regions. - -#!/bin/sh - -if [ $# -ne 2 ]; then - echo "usage: $0: <image file> <mtd device node>" - exit 1 -fi - -# reliable mode used for the first two blocks -modprobe -r docg4 -modprobe docg4 ignore_badblocks=1 reliable_mode=1 || exit 1 - -# erase all four blocks -flash_erase $2 0 4 - -# Program the first two blocks in reliable mode. -# 2k (4 pages) is written at a time, skipping alternate 2k regions -# Note that "2k" is 2112 bytes, including 64 oob bytes -file_ofs=0 -flash_ofs=0 -page=0 -while [ $page -ne 1024 ]; do - dd if=$1 bs=2112 skip=$file_ofs count=1 | nandwrite -o -n -s $flash_ofs $2 - || exit 1 - file_ofs=$((file_ofs+2)) - flash_ofs=$((flash_ofs+0x1000)) - page=$((page+8)) -done; - -# normal mode used for the next two blocks -modprobe -r docg4 -modprobe docg4 ignore_badblocks=1 || exit 1 -dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1 -modprobe -r docg4 - -TODO -==== - - - Keypad support. - - Interactive boot menu using keypad and lcd. - - Add reliable mode support to the u-boot docg4 driver. - - U-boot command that will write a new image to the bootloader partition in - flash. - - Linux FTD support. diff --git a/board/palmtreo680/palmtreo680.c b/board/palmtreo680/palmtreo680.c deleted file mode 100644 index f4f6e1f5b9..0000000000 --- a/board/palmtreo680/palmtreo680.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * Palm Treo 680 Support - * - * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com> - * - * This file is released under the terms of GPL v2 and any later version. - * See the file COPYING in the root directory of the source tree for details. - * - */ - -#include <common.h> -#include <command.h> -#include <serial.h> -#include <nand.h> -#include <malloc.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch-pxa/pxa.h> -#include <asm/arch-pxa/regs-mmc.h> -#include <asm/io.h> -#include <asm/global_data.h> -#include <u-boot/crc.h> -#include <linux/mtd/docg4.h> - -DECLARE_GLOBAL_DATA_PTR; - -static struct nand_chip docg4_nand_chip; - -int board_init(void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; - gd->bd->bi_boot_params = CONFIG_SYS_DRAM_BASE + 0x100; - - return 0; -} - -int dram_init(void) -{ - /* IPL initializes SDRAM (we're already running from it) */ - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -#ifdef CONFIG_LCD -void lcd_enable(void) -{ - /* - * Undo the L_BIAS / gpio77 pin configuration performed by the pxa lcd - * driver code. We need it as an output gpio. - */ - writel((readl(GAFR2_L) & ~(0xc << 24)), GAFR2_L); - - /* power-up and enable the lcd */ - writel(0x00400000, GPSR(86)); /* enable; drive high */ - writel(0x00002000, GPSR(77)); /* power; drive high */ - writel(0x02000000, GPCR(25)); /* enable_n; drive low */ - - /* turn on LCD backlight and configure PWM for reasonable brightness */ - writel(0x00, PWM_CTRL0); - writel(0x1b1, PWM_PERVAL0); - writel(0xfd, PWM_PWDUTY0); - writel(0x00000040, GPSR(38)); /* backlight power on */ -} -#endif - -#ifdef CONFIG_MMC -int board_mmc_init(bd_t *bis) -{ - writel(1 << 10, GPSR(42)); /* power on */ - return pxa_mmc_register(0); -} -#endif - -void board_nand_init(void) -{ - /* we have one 128M diskonchip G4 */ - - struct mtd_info *mtd = &nand_info[0]; - struct nand_chip *nand = &docg4_nand_chip; - if (docg4_nand_init(mtd, nand, 0)) - hang(); -} - -#ifdef CONFIG_SPL_BUILD -void nand_boot(void) -{ - __attribute__((noreturn)) void (*uboot)(void); - - extern const void *_start, *_end; /* boundaries of spl in memory */ - - /* size of spl; ipl loads this, and then a portion of u-boot */ - const size_t spl_image_size = ((size_t)&_end - (size_t)&_start); - - /* the flash offset of the blocks that are loaded by the spl */ - const uint32_t spl_load_offset = CONFIG_SYS_NAND_U_BOOT_OFFS + - DOCG4_IPL_LOAD_BLOCK_COUNT * DOCG4_BLOCK_SIZE; - - /* total number of bytes loaded by IPL */ - const size_t ipl_load_size = - DOCG4_IPL_LOAD_BLOCK_COUNT * DOCG4_BLOCK_CAPACITY_SPL; - - /* number of bytes of u-boot proper that was loaded by the IPL */ - const size_t ipl_uboot_load_size = ipl_load_size - spl_image_size; - - /* number of remaining bytes of u-boot that the SPL must load */ - const size_t spl_load_size = - CONFIG_SYS_NAND_U_BOOT_SIZE - ipl_load_size; - - /* memory address where we resume loading u-boot */ - void *const load_addr = - (void *)(CONFIG_SYS_NAND_U_BOOT_DST + ipl_uboot_load_size); - - /* - * Copy the portion of u-boot already read from flash by the IPL to its - * correct load address. - */ - memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST, &_end, ipl_uboot_load_size); - - /* - * Resume loading u-boot where the IPL left off. - */ - nand_spl_load_image(spl_load_offset, spl_load_size, load_addr); - -#ifdef CONFIG_NAND_ENV_DST - nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (void *)CONFIG_NAND_ENV_DST); - -#ifdef CONFIG_ENV_OFFSET_REDUND - nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, - (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); -#endif -#endif - /* - * Jump to U-Boot image - */ - uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; - (*uboot)(); -} - -void board_init_f(ulong bootflag) -{ - nand_boot(); -} - -#endif /* CONFIG_SPL_BUILD */ diff --git a/board/phytec/pcm052/Kconfig b/board/phytec/pcm052/Kconfig new file mode 100644 index 0000000000..d67a69a747 --- /dev/null +++ b/board/phytec/pcm052/Kconfig @@ -0,0 +1,15 @@ +if TARGET_PCM052 + +config SYS_BOARD + default "pcm052" + +config SYS_VENDOR + default "phytec" + +config SYS_SOC + default "vf610" + +config SYS_CONFIG_NAME + default "pcm052" + +endif diff --git a/board/phytec/pcm052/MAINTAINERS b/board/phytec/pcm052/MAINTAINERS new file mode 100644 index 0000000000..a877436bd3 --- /dev/null +++ b/board/phytec/pcm052/MAINTAINERS @@ -0,0 +1,6 @@ +PCM052 BOARD +M: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> +S: Maintained +F: board/phytec/pcm052/ +F: include/configs/pcm052.h +F: configs/pcm052_defconfig diff --git a/board/phytec/pcm052/Makefile b/board/phytec/pcm052/Makefile new file mode 100644 index 0000000000..144f4e7316 --- /dev/null +++ b/board/phytec/pcm052/Makefile @@ -0,0 +1,7 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := pcm052.o diff --git a/board/phytec/pcm052/imximage.cfg b/board/phytec/pcm052/imximage.cfg new file mode 100644 index 0000000000..f5a97475cb --- /dev/null +++ b/board/phytec/pcm052/imximage.cfg @@ -0,0 +1,17 @@ +/* + * Copyright 2015 3ADEV <http://www.3adev.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +#include <asm/imx-common/imximage.cfg> + +/* image version */ +IMAGE_VERSION 2 + +/* Boot Offset 0x400, valid for both SD and NAND boot */ +BOOT_OFFSET FLASH_OFFSET_STANDARD diff --git a/board/phytec/pcm052/pcm052.c b/board/phytec/pcm052/pcm052.c new file mode 100644 index 0000000000..e4f61e1b92 --- /dev/null +++ b/board/phytec/pcm052/pcm052.c @@ -0,0 +1,515 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux-vf610.h> +#include <asm/arch/ddrmc-vf610.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <miiphy.h> +#include <netdev.h> +#include <i2c.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Default DDR pad settings in arch/arm/include/asm/arch-vf610/iomux-vf610.h + * do not match our settings. Let us (re)define our own settings here. + */ + +#define PCM052_VF610_DDR_PAD_CTRL PAD_CTL_DSE_20ohm +#define PCM052_VF610_DDR_PAD_CTRL_1 (PAD_CTL_DSE_20ohm | \ + PAD_CTL_INPUT_DIFFERENTIAL) +#define PCM052_VF610_DDR_RESET_PAD_CTL (PAD_CTL_DSE_150ohm | \ + PAD_CTL_PUS_100K_UP | \ + PAD_CTL_INPUT_DIFFERENTIAL) + +enum { + PCM052_VF610_PAD_DDR_RESETB = IOMUX_PAD(0x021c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_RESET_PAD_CTL), + PCM052_VF610_PAD_DDR_A15__DDR_A_15 = IOMUX_PAD(0x0220, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A14__DDR_A_14 = IOMUX_PAD(0x0224, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A13__DDR_A_13 = IOMUX_PAD(0x0228, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A12__DDR_A_12 = IOMUX_PAD(0x022c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A11__DDR_A_11 = IOMUX_PAD(0x0230, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A10__DDR_A_10 = IOMUX_PAD(0x0234, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A9__DDR_A_9 = IOMUX_PAD(0x0238, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A8__DDR_A_8 = IOMUX_PAD(0x023c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A7__DDR_A_7 = IOMUX_PAD(0x0240, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A6__DDR_A_6 = IOMUX_PAD(0x0244, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A5__DDR_A_5 = IOMUX_PAD(0x0248, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A4__DDR_A_4 = IOMUX_PAD(0x024c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A3__DDR_A_3 = IOMUX_PAD(0x0250, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A2__DDR_A_2 = IOMUX_PAD(0x0254, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A1__DDR_A_1 = IOMUX_PAD(0x0258, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_A0__DDR_A_0 = IOMUX_PAD(0x025c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_BA2__DDR_BA_2 = IOMUX_PAD(0x0260, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_BA1__DDR_BA_1 = IOMUX_PAD(0x0264, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_BA0__DDR_BA_0 = IOMUX_PAD(0x0268, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_CAS__DDR_CAS_B = IOMUX_PAD(0x026c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_CKE__DDR_CKE_0 = IOMUX_PAD(0x0270, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_CLK__DDR_CLK_0 = IOMUX_PAD(0x0274, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL_1), + PCM052_VF610_PAD_DDR_CS__DDR_CS_B_0 = IOMUX_PAD(0x0278, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D15__DDR_D_15 = IOMUX_PAD(0x027c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D14__DDR_D_14 = IOMUX_PAD(0x0280, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D13__DDR_D_13 = IOMUX_PAD(0x0284, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D12__DDR_D_12 = IOMUX_PAD(0x0288, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D11__DDR_D_11 = IOMUX_PAD(0x028c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D10__DDR_D_10 = IOMUX_PAD(0x0290, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D9__DDR_D_9 = IOMUX_PAD(0x0294, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D8__DDR_D_8 = IOMUX_PAD(0x0298, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D7__DDR_D_7 = IOMUX_PAD(0x029c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D6__DDR_D_6 = IOMUX_PAD(0x02a0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D5__DDR_D_5 = IOMUX_PAD(0x02a4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D4__DDR_D_4 = IOMUX_PAD(0x02a8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D3__DDR_D_3 = IOMUX_PAD(0x02ac, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D2__DDR_D_2 = IOMUX_PAD(0x02b0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D1__DDR_D_1 = IOMUX_PAD(0x02b4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_D0__DDR_D_0 = IOMUX_PAD(0x02b8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_DQM1__DDR_DQM_1 = IOMUX_PAD(0x02bc, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_DQM0__DDR_DQM_0 = IOMUX_PAD(0x02c0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_DQS1__DDR_DQS_1 = IOMUX_PAD(0x02c4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL_1), + PCM052_VF610_PAD_DDR_DQS0__DDR_DQS_0 = IOMUX_PAD(0x02c8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL_1), + PCM052_VF610_PAD_DDR_RAS__DDR_RAS_B = IOMUX_PAD(0x02cc, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_WE__DDR_WE_B = IOMUX_PAD(0x02d0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_ODT1__DDR_ODT_0 = IOMUX_PAD(0x02d4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_ODT0__DDR_ODT_1 = IOMUX_PAD(0x02d8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1 = IOMUX_PAD(0x02dc, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), + PCM052_VF610_PAD_DDR_DDRBYTE0__DDR_DDRBYTE0 = IOMUX_PAD(0x02e0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL), +}; + +static struct ddrmc_cr_setting pcm052_cr_settings[] = { + /* not in the datasheets, but in the original code */ + { 0x00002000, 105 }, + { 0x00000020, 110 }, + /* AXI */ + { DDRMC_CR117_AXI0_W_PRI(1) | DDRMC_CR117_AXI0_R_PRI(1), 117 }, + { DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 }, + { DDRMC_CR120_AXI0_PRI1_RPRI(2) | + DDRMC_CR120_AXI0_PRI0_RPRI(2), 120 }, + { DDRMC_CR121_AXI0_PRI3_RPRI(2) | + DDRMC_CR121_AXI0_PRI2_RPRI(2), 121 }, + { DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) | + DDRMC_CR122_AXI0_PRIRLX(100), 122 }, + { DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) | + DDRMC_CR123_AXI1_PRI2_RPRI(1), 123 }, + { DDRMC_CR124_AXI1_PRIRLX(100), 124 }, + { DDRMC_CR126_PHY_RDLAT(11), 126 }, + { DDRMC_CR132_WRLAT_ADJ(5) | DDRMC_CR132_RDLAT_ADJ(6), 132 }, + { DDRMC_CR137_PHYCTL_DL(2), 137 }, + { DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) | + DDRMC_CR139_PHY_WRLV_DLL(3) | + DDRMC_CR139_PHY_WRLV_EN(3), 139 }, + { DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) | + DDRMC_CR154_PAD_ZQ_MODE(1) | + DDRMC_CR154_DDR_SEL_PAD_CONTR(3) | + DDRMC_CR154_PAD_ZQ_HW_FOR(0), 154 }, + { DDRMC_CR155_PAD_ODT_BYTE1(5) | DDRMC_CR155_PAD_ODT_BYTE0(5), 155 }, + { DDRMC_CR158_TWR(6), 158 }, + { DDRMC_CR161_ODT_EN(0) | DDRMC_CR161_TODTH_RD(0) | + DDRMC_CR161_TODTH_WR(6), 161 }, + /* end marker */ + { 0, -1 } +}; + +/* PHY settings -- most of them differ from default in imx-regs.h */ + +#define PCM052_DDRMC_PHY_DQ_TIMING 0x00002213 +#define PCM052_DDRMC_PHY_CTRL 0x00290000 +#define PCM052_DDRMC_PHY_SLAVE_CTRL 0x00002c00 +#define PCM052_DDRMC_PHY_PROC_PAD_ODT 0x00010020 + +static struct ddrmc_phy_setting pcm052_phy_settings[] = { + { PCM052_DDRMC_PHY_DQ_TIMING, 0 }, + { PCM052_DDRMC_PHY_DQ_TIMING, 16 }, + { PCM052_DDRMC_PHY_DQ_TIMING, 32 }, + { PCM052_DDRMC_PHY_DQ_TIMING, 48 }, + { DDRMC_PHY_DQS_TIMING, 1 }, + { DDRMC_PHY_DQS_TIMING, 17 }, + { DDRMC_PHY_DQS_TIMING, 33 }, + { DDRMC_PHY_DQS_TIMING, 49 }, + { PCM052_DDRMC_PHY_CTRL, 2 }, + { PCM052_DDRMC_PHY_CTRL, 18 }, + { PCM052_DDRMC_PHY_CTRL, 34 }, + { DDRMC_PHY_MASTER_CTRL, 3 }, + { DDRMC_PHY_MASTER_CTRL, 19 }, + { DDRMC_PHY_MASTER_CTRL, 35 }, + { PCM052_DDRMC_PHY_SLAVE_CTRL, 4 }, + { PCM052_DDRMC_PHY_SLAVE_CTRL, 20 }, + { PCM052_DDRMC_PHY_SLAVE_CTRL, 36 }, + { DDRMC_PHY50_DDR3_MODE | DDRMC_PHY50_EN_SW_HALF_CYCLE, 50 }, + { PCM052_DDRMC_PHY_PROC_PAD_ODT, 52 }, + + /* end marker */ + { 0, -1 } +}; + +int dram_init(void) +{ + static const struct ddr3_jedec_timings pcm052_ddr_timings = { + .tinit = 5, + .trst_pwron = 80000, + .cke_inactive = 200000, + .wrlat = 5, + .caslat_lin = 12, + .trc = 6, + .trrd = 4, + .tccd = 4, + .tbst_int_interval = 4, + .tfaw = 18, + .trp = 6, + .twtr = 4, + .tras_min = 15, + .tmrd = 4, + .trtp = 4, + .tras_max = 14040, + .tmod = 12, + .tckesr = 4, + .tcke = 3, + .trcd_int = 6, + .tras_lockout = 1, + .tdal = 10, + .bstlen = 3, + .tdll = 512, + .trp_ab = 6, + .tref = 1542, + .trfc = 64, + .tref_int = 5, + .tpdex = 3, + .txpdll = 10, + .txsnr = 68, + .txsr = 506, + .cksrx = 5, + .cksre = 5, + .freq_chg_en = 1, + .zqcl = 256, + .zqinit = 512, + .zqcs = 64, + .ref_per_zq = 64, + .zqcs_rotate = 1, + .aprebit = 10, + .cmd_age_cnt = 255, + .age_cnt = 255, + .q_fullness = 0, + .odt_rd_mapcs0 = 1, + .odt_wr_mapcs0 = 1, + .wlmrd = 40, + .wldqsen = 25, + }; + + static const iomux_v3_cfg_t pcm052_pads[] = { + PCM052_VF610_PAD_DDR_A15__DDR_A_15, + PCM052_VF610_PAD_DDR_A14__DDR_A_14, + PCM052_VF610_PAD_DDR_A13__DDR_A_13, + PCM052_VF610_PAD_DDR_A12__DDR_A_12, + PCM052_VF610_PAD_DDR_A11__DDR_A_11, + PCM052_VF610_PAD_DDR_A10__DDR_A_10, + PCM052_VF610_PAD_DDR_A9__DDR_A_9, + PCM052_VF610_PAD_DDR_A8__DDR_A_8, + PCM052_VF610_PAD_DDR_A7__DDR_A_7, + PCM052_VF610_PAD_DDR_A6__DDR_A_6, + PCM052_VF610_PAD_DDR_A5__DDR_A_5, + PCM052_VF610_PAD_DDR_A4__DDR_A_4, + PCM052_VF610_PAD_DDR_A3__DDR_A_3, + PCM052_VF610_PAD_DDR_A2__DDR_A_2, + PCM052_VF610_PAD_DDR_A1__DDR_A_1, + PCM052_VF610_PAD_DDR_A0__DDR_A_0, + PCM052_VF610_PAD_DDR_BA2__DDR_BA_2, + PCM052_VF610_PAD_DDR_BA1__DDR_BA_1, + PCM052_VF610_PAD_DDR_BA0__DDR_BA_0, + PCM052_VF610_PAD_DDR_CAS__DDR_CAS_B, + PCM052_VF610_PAD_DDR_CKE__DDR_CKE_0, + PCM052_VF610_PAD_DDR_CLK__DDR_CLK_0, + PCM052_VF610_PAD_DDR_CS__DDR_CS_B_0, + PCM052_VF610_PAD_DDR_D15__DDR_D_15, + PCM052_VF610_PAD_DDR_D14__DDR_D_14, + PCM052_VF610_PAD_DDR_D13__DDR_D_13, + PCM052_VF610_PAD_DDR_D12__DDR_D_12, + PCM052_VF610_PAD_DDR_D11__DDR_D_11, + PCM052_VF610_PAD_DDR_D10__DDR_D_10, + PCM052_VF610_PAD_DDR_D9__DDR_D_9, + PCM052_VF610_PAD_DDR_D8__DDR_D_8, + PCM052_VF610_PAD_DDR_D7__DDR_D_7, + PCM052_VF610_PAD_DDR_D6__DDR_D_6, + PCM052_VF610_PAD_DDR_D5__DDR_D_5, + PCM052_VF610_PAD_DDR_D4__DDR_D_4, + PCM052_VF610_PAD_DDR_D3__DDR_D_3, + PCM052_VF610_PAD_DDR_D2__DDR_D_2, + PCM052_VF610_PAD_DDR_D1__DDR_D_1, + PCM052_VF610_PAD_DDR_D0__DDR_D_0, + PCM052_VF610_PAD_DDR_DQM1__DDR_DQM_1, + PCM052_VF610_PAD_DDR_DQM0__DDR_DQM_0, + PCM052_VF610_PAD_DDR_DQS1__DDR_DQS_1, + PCM052_VF610_PAD_DDR_DQS0__DDR_DQS_0, + PCM052_VF610_PAD_DDR_RAS__DDR_RAS_B, + PCM052_VF610_PAD_DDR_WE__DDR_WE_B, + PCM052_VF610_PAD_DDR_ODT1__DDR_ODT_0, + PCM052_VF610_PAD_DDR_ODT0__DDR_ODT_1, + PCM052_VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1, + PCM052_VF610_PAD_DDR_DDRBYTE0__DDR_DDRBYTE0, + PCM052_VF610_PAD_DDR_RESETB, + }; + + imx_iomux_v3_setup_multiple_pads(pcm052_pads, ARRAY_SIZE(pcm052_pads)); + + ddrmc_ctrl_init_ddr3(&pcm052_ddr_timings, pcm052_cr_settings, + pcm052_phy_settings, 1, 2); + + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +static void setup_iomux_uart(void) +{ + static const iomux_v3_cfg_t uart1_pads[] = { + NEW_PAD_CTRL(VF610_PAD_PTB4__UART1_TX, VF610_UART_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTB5__UART1_RX, VF610_UART_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \ + PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE) + +static void setup_iomux_enet(void) +{ + static const iomux_v3_cfg_t enet0_pads[] = { + NEW_PAD_CTRL(VF610_PAD_PTA6__RMII0_CLKIN, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC1__RMII0_MDIO, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC0__RMII0_MDC, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC2__RMII0_CRS_DV, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC3__RMII0_RD1, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC4__RMII0_RD0, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC5__RMII0_RXER, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC6__RMII0_TD1, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC7__RMII0_TD0, ENET_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTC8__RMII0_TXEN, ENET_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(enet0_pads, ARRAY_SIZE(enet0_pads)); +} + +/* + * I2C2 is the only I2C used, on pads PTA22/PTA23. + */ + +static void setup_iomux_i2c(void) +{ + static const iomux_v3_cfg_t i2c_pads[] = { + VF610_PAD_PTA22__I2C2_SCL, + VF610_PAD_PTA23__I2C2_SDA, + }; + + imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads)); +} + +#ifdef CONFIG_NAND_VF610_NFC +static void setup_iomux_nfc(void) +{ + static const iomux_v3_cfg_t nfc_pads[] = { + VF610_PAD_PTD31__NF_IO15, + VF610_PAD_PTD30__NF_IO14, + VF610_PAD_PTD29__NF_IO13, + VF610_PAD_PTD28__NF_IO12, + VF610_PAD_PTD27__NF_IO11, + VF610_PAD_PTD26__NF_IO10, + VF610_PAD_PTD25__NF_IO9, + VF610_PAD_PTD24__NF_IO8, + VF610_PAD_PTD23__NF_IO7, + VF610_PAD_PTD22__NF_IO6, + VF610_PAD_PTD21__NF_IO5, + VF610_PAD_PTD20__NF_IO4, + VF610_PAD_PTD19__NF_IO3, + VF610_PAD_PTD18__NF_IO2, + VF610_PAD_PTD17__NF_IO1, + VF610_PAD_PTD16__NF_IO0, + VF610_PAD_PTB24__NF_WE_B, + VF610_PAD_PTB25__NF_CE0_B, + VF610_PAD_PTB27__NF_RE_B, + VF610_PAD_PTC26__NF_RB_B, + VF610_PAD_PTC27__NF_ALE, + VF610_PAD_PTC28__NF_CLE + }; + + imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads)); +} +#endif + +static void setup_iomux_qspi(void) +{ + static const iomux_v3_cfg_t qspi0_pads[] = { + VF610_PAD_PTD0__QSPI0_A_QSCK, + VF610_PAD_PTD1__QSPI0_A_CS0, + VF610_PAD_PTD2__QSPI0_A_DATA3, + VF610_PAD_PTD3__QSPI0_A_DATA2, + VF610_PAD_PTD4__QSPI0_A_DATA1, + VF610_PAD_PTD5__QSPI0_A_DATA0, + VF610_PAD_PTD7__QSPI0_B_QSCK, + VF610_PAD_PTD8__QSPI0_B_CS0, + VF610_PAD_PTD9__QSPI0_B_DATA3, + VF610_PAD_PTD10__QSPI0_B_DATA2, + VF610_PAD_PTD11__QSPI0_B_DATA1, + VF610_PAD_PTD12__QSPI0_B_DATA0, + }; + + imx_iomux_v3_setup_multiple_pads(qspi0_pads, ARRAY_SIZE(qspi0_pads)); +} + +#define ESDHC_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \ + PAD_CTL_DSE_20ohm | PAD_CTL_OBE_IBE_ENABLE) + +struct fsl_esdhc_cfg esdhc_cfg[1] = { + {ESDHC1_BASE_ADDR}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + /* eSDHC1 is always present */ + return 1; +} + +int board_mmc_init(bd_t *bis) +{ + static const iomux_v3_cfg_t esdhc1_pads[] = { + NEW_PAD_CTRL(VF610_PAD_PTA24__ESDHC1_CLK, ESDHC_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTA25__ESDHC1_CMD, ESDHC_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTA26__ESDHC1_DAT0, ESDHC_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTA27__ESDHC1_DAT1, ESDHC_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL), + NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL), + }; + + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + + imx_iomux_v3_setup_multiple_pads( + esdhc1_pads, ARRAY_SIZE(esdhc1_pads)); + + return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); +} + +static void clock_init(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR; + + clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK, + CCM_CCGR0_UART1_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK, + CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK, + CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK | + CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK | + CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK | + CCM_CCGR2_QSPI0_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK, + CCM_CCGR3_ANADIG_CTRL_MASK | CCM_CCGR3_SCSC_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK, + CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK | + CCM_CCGR4_GPC_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK, + CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK, + CCM_CCGR7_SDHC1_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK, + CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK, + CCM_CCGR10_NFC_CTRL_MASK | CCM_CCGR10_I2C2_CTRL_MASK); + + clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN, + ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT); + clrsetbits_le32(&anadig->pll1_ctrl, ANADIG_PLL1_CTRL_POWERDOWN, + ANADIG_PLL1_CTRL_ENABLE | ANADIG_PLL1_CTRL_DIV_SELECT); + + clrsetbits_le32(&ccm->ccr, CCM_CCR_OSCNT_MASK, + CCM_CCR_FIRC_EN | CCM_CCR_OSCNT(5)); + clrsetbits_le32(&ccm->ccsr, CCM_REG_CTRL_MASK, + CCM_CCSR_PLL1_PFD_CLK_SEL(3) | CCM_CCSR_PLL2_PFD4_EN | + CCM_CCSR_PLL2_PFD3_EN | CCM_CCSR_PLL2_PFD2_EN | + CCM_CCSR_PLL2_PFD1_EN | CCM_CCSR_PLL1_PFD4_EN | + CCM_CCSR_PLL1_PFD3_EN | CCM_CCSR_PLL1_PFD2_EN | + CCM_CCSR_PLL1_PFD1_EN | CCM_CCSR_DDRC_CLK_SEL(1) | + CCM_CCSR_FAST_CLK_SEL(1) | CCM_CCSR_SYS_CLK_SEL(4)); + clrsetbits_le32(&ccm->cacrr, CCM_REG_CTRL_MASK, + CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) | + CCM_CACRR_ARM_CLK_DIV(0)); + clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK, + CCM_CSCMR1_ESDHC1_CLK_SEL(3) | + CCM_CSCMR1_QSPI0_CLK_SEL(3) | + CCM_CSCMR1_NFC_CLK_SEL(0)); + clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK, + CCM_CSCDR1_RMII_CLK_EN); + clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK, + CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) | + CCM_CSCDR2_NFC_EN); + clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK, + CCM_CSCDR3_QSPI0_EN | CCM_CSCDR3_QSPI0_DIV(1) | + CCM_CSCDR3_QSPI0_X2_DIV(1) | + CCM_CSCDR3_QSPI0_X4_DIV(3) | + CCM_CSCDR3_NFC_PRE_DIV(5)); + clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK, + CCM_CSCMR2_RMII_CLK_SEL(0)); +} + +static void mscm_init(void) +{ + struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_IR_BASE_ADDR; + int i; + + for (i = 0; i < MSCM_IRSPRC_NUM; i++) + writew(MSCM_IRSPRC_CP0_EN, &mscmir->irsprc[i]); +} + +int board_phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +int board_early_init_f(void) +{ + clock_init(); + mscm_init(); + setup_iomux_uart(); + setup_iomux_enet(); + setup_iomux_i2c(); + setup_iomux_qspi(); + setup_iomux_nfc(); + + return 0; +} + +int board_init(void) +{ + struct scsc_reg *scsc = (struct scsc_reg *)SCSC_BASE_ADDR; + + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + /* + * Enable external 32K Oscillator + * + * The internal clock experiences significant drift + * so we must use the external oscillator in order + * to maintain correct time in the hwclock + */ + setbits_le32(&scsc->sosc_ctr, SCSC_SOSC_CTR_SOSC_EN); + + return 0; +} + +int checkboard(void) +{ + puts("Board: PCM-052\n"); + + return 0; +} diff --git a/board/pxa255_idp/Kconfig b/board/pxa255_idp/Kconfig deleted file mode 100644 index 544831199d..0000000000 --- a/board/pxa255_idp/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_PXA255_IDP - -config SYS_BOARD - default "pxa255_idp" - -config SYS_CONFIG_NAME - default "pxa255_idp" - -endif diff --git a/board/pxa255_idp/MAINTAINERS b/board/pxa255_idp/MAINTAINERS deleted file mode 100644 index 24d723602c..0000000000 --- a/board/pxa255_idp/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PXA255_IDP BOARD -M: Cliff Brake <cliff.brake@gmail.com> -S: Maintained -F: board/pxa255_idp/ -F: include/configs/pxa255_idp.h -F: configs/pxa255_idp_defconfig diff --git a/board/pxa255_idp/Makefile b/board/pxa255_idp/Makefile deleted file mode 100644 index 59d696741d..0000000000 --- a/board/pxa255_idp/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := pxa_idp.o diff --git a/board/pxa255_idp/README b/board/pxa255_idp/README deleted file mode 100644 index 0cc2f2ae33..0000000000 --- a/board/pxa255_idp/README +++ /dev/null @@ -1,11 +0,0 @@ -Tested: - -- MMC -- Ethernet -- BL console (on serial port connector J5) -- flash support - -Todo: - -- display support -- PCMCIA support diff --git a/board/pxa255_idp/idp_notes.txt b/board/pxa255_idp/idp_notes.txt deleted file mode 100644 index 47467485fe..0000000000 --- a/board/pxa255_idp/idp_notes.txt +++ /dev/null @@ -1,46 +0,0 @@ -Notes on the Vibren PXA255 IDP. - -Chip select usage: - -CS0 - flash -CS1 - alt flash (Mdoc or main flash) -CS2 - high speed expansion bus -CS3 - Media Q, low speed exp bus -CS4 - low speed exp bus -CS5 - low speed exp bus - - IDE: offset 0x03000000 (abs: 0x17000000) - - Eth: offset 0x03400000 (abs: 0x17400000) - - core voltage latch: offset 0x03800000 (abs: 0x17800000) - - CPLD: offset 0x03C00000 (abs: 0x17C00000) - -PCMCIA Power control - -MAX1602EE w/ code pulled high (Cirrus code) -vx = 5v -vy = 3v - - Bit pattern - PWR 3,2,1,0 -vcc vpp A1VCC A0VCC A1VPP A0VPP -===================================================== -0 0 0 0 0 0 0x0 -3 (vy) 0 1 0 1 1 0xB -3 (vy) 3 (vy) 1 0 0 1 0x9 -3 (vy) 12(12in) 1 0 1 0 0xA -5 (vx) 0 0 1 1 1 0x7 -5 (vx) 5 (vx) 0 1 0 1 0x5 -5 (vx 12(12in) 0 1 1 0 0x6 - -Display power sequencing: - -- VDD applied -- within 1sec, activate scanning signals -- wait at least 50mS - scanning signals must be active before activating DISP - -Signal mapping: -Schematic LV8V31 signal name -========================================= -LCD_ENAVLCD DISP -LCD_PWR Applies VDD to board - -Both of the above signals are controlled by the CPLD diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c deleted file mode 100644 index 197ff3ef31..0000000000 --- a/board/pxa255_idp/pxa_idp.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2004 - * BEC Systems <http://bec-systems.com> - * Cliff Brake <cliff.brake@gmail.com> - * Support for Accelent/Vibren PXA255 IDP - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <command.h> -#include <asm/io.h> -#include <asm/arch/pxa.h> -#include <asm/arch/regs-mmc.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of Lubbock-Board */ - gd->bd->bi_arch_number = MACH_TYPE_PXA_IDP; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* turn on serial ports */ - *(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C0002c) = 0x13; - - /* set PWM for LCD */ - /* a value that works is 60Hz, 77% duty cycle */ - writel(readl(CKEN) | CKEN0_PWM0, CKEN); - writel(0x3f, PWM_CTRL0); - writel(0x3ff, PWM_PERVAL0); - writel(792, PWM_PWDUTY0); - - /* clear reset to AC97 codec */ - writel(readl(CKEN) | CKEN2_AC97, CKEN); - writel(GCR_COLD_RST, GCR); - - /* enable LCD backlight */ - /* *(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C00030) = 0x7; */ - - /* test display */ - /* lcd_puts("This is a test\nTest #2\n"); */ - - return 0; -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif - -int board_late_init(void) -{ - setenv("stdout", "serial"); - setenv("stderr", "serial"); - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef DEBUG_BLINKC_ENABLE - -void delay_c(void) -{ - /* reset OSCR to 0 */ - writel(0, OSCR); - while (readl(OSCR) > 0x10000) - ; - - while (readl(OSCR) < 0xd4000) - ; -} - -void blink_c(void) -{ - int led_bit = (1<<10); - - writel(led_bit, GPDR0); - writel(led_bit, GPCR0); - delay_c(); - writel(led_bit, GPSR0); - delay_c(); - writel(led_bit, GPCR0); -} - -int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - printf("IDPCMD started\n"); - return 0; -} - -U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd, - "custom IDP command", - "no args at this time" -); - -#endif - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/pxa255_idp/pxa_reg_calcs.out b/board/pxa255_idp/pxa_reg_calcs.out deleted file mode 100644 index 39295fb679..0000000000 --- a/board/pxa255_idp/pxa_reg_calcs.out +++ /dev/null @@ -1,119 +0,0 @@ -gafr0_l: 0x80001005 -gafr0_u: 0xa5128012 -gafr1_l: 0x699a9558 -gafr1_u: 0xaaa5aa6a -gafr2_l: 0xaaaaaaaa -gafr2_u: 0x2 -gpcr0: 0x1800400 -gpcr1: 0x0 -gpcr2: 0x0 -gpdr0: 0xc1818440 -gpdr1: 0xfcffab82 -gpdr2: 0x1ffff -gpsr0: 0x8000 -gpsr1: 0x3f0002 -gpsr2: 0x1c000 - - -#define CONFIG_SYS_GAFR0_L_VAL 0x80001005 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5128012 -#define CONFIG_SYS_GAFR1_L_VAL 0x699a9558 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5aa6a -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x2 -#define CONFIG_SYS_GPCR0_VAL 0x1800400 -#define CONFIG_SYS_GPCR1_VAL 0x0 -#define CONFIG_SYS_GPCR2_VAL 0x0 -#define CONFIG_SYS_GPDR0_VAL 0xc1818440 -#define CONFIG_SYS_GPDR1_VAL 0xfcffab82 -#define CONFIG_SYS_GPDR2_VAL 0x1ffff -#define CONFIG_SYS_GPSR0_VAL 0x8000 -#define CONFIG_SYS_GPSR1_VAL 0x3f0002 -#define CONFIG_SYS_GPSR2_VAL 0x1c000 - - -GPIO: 0, dir=0, set=0, clr=0, alt=none, desc=USER_RESET# -GPIO: 1, dir=0, set=0, clr=0, alt=gpio reset, desc=USER_RESET# -GPIO: 2, dir=0, set=0, clr=0, alt=gpio, desc=BAT_DATA -GPIO: 3, dir=0, set=0, clr=0, alt=gpio, desc=MQ_IRQ# -GPIO: 4, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_ETH -GPIO: 5, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_TOUCH# -GPIO: 6, dir=1, set=0, clr=0, alt=MMC clk, desc=MMC_CLK -GPIO: 7, dir=0, set=0, clr=0, alt=gpio, desc=PCC_S0_CD# -GPIO: 8, dir=0, set=0, clr=0, alt=gpio, desc=PCC_S1_CD# -GPIO: 9, dir=0, set=0, clr=0, alt=gpio, desc=MMC_CD# -GPIO: 10, dir=1, set=0, clr=1, alt=gpio, desc=GPIO_10/RTC_CLK/debug LED -GPIO: 11, dir=0, set=0, clr=0, alt=gpio, desc=3M6_CLK -GPIO: 12, dir=0, set=0, clr=0, alt=gpio, desc=GPIO_12/32K_CLK -GPIO: 13, dir=0, set=0, clr=0, alt=gpio, desc=MBGNT -GPIO: 14, dir=0, set=0, clr=0, alt=gpio, desc=MBREQ -GPIO: 15, dir=1, set=1, clr=0, alt=nCS_1, desc=CS1# -GPIO: 16, dir=1, set=0, clr=0, alt=PWM0, desc=PWM0 -GPIO: 17, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_AXB -GPIO: 18, dir=0, set=0, clr=0, alt=RDY, desc=RDY -GPIO: 19, dir=0, set=0, clr=0, alt=gpio, desc=XB_DREQ1, PCC_SO_IRQ_O# -GPIO: 20, dir=0, set=0, clr=0, alt=gpio, desc=XB_DREQ0 -GPIO: 21, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_IDE, PFI -GPIO: 22, dir=0, set=0, clr=0, alt=gpio, desc=Consumer IR, PCC_S1_IRQ_O# -GPIO: 23, dir=1, set=0, clr=1, alt=SSP SCLK, desc=SSP_SCLK -GPIO: 24, dir=1, set=0, clr=1, alt=SSP SFRM, desc=SSP_SFRM -GPIO: 25, dir=0, set=0, clr=0, alt=gpio, desc=SSP_TXD -GPIO: 26, dir=0, set=0, clr=0, alt=SSP RXD, desc=SSP_RXD -GPIO: 27, dir=0, set=0, clr=0, alt=gpio, desc=SSP_EXTCLK -GPIO: 28, dir=0, set=0, clr=0, alt=AC97 bitclk in, I2S bitclock out, desc=AC_BITCLK -GPIO: 29, dir=0, set=0, clr=0, alt=AC97 SDATA_IN0, desc=AUD_SDIN0 -GPIO: 30, dir=1, set=0, clr=0, alt=AC97 SDATA_OUT, desc=AC_SDOUT -GPIO: 31, dir=1, set=0, clr=0, alt=AC97 SYNC, desc=AC_SYNC -GPIO: 32, dir=0, set=0, clr=0, alt=gpio, desc=AUD_SDIN1 -GPIO: 33, dir=1, set=1, clr=0, alt=nCS_5, desc=CS5# -GPIO: 34, dir=0, set=0, clr=0, alt=FF RXD, desc=FF_RXD -GPIO: 35, dir=0, set=0, clr=0, alt=FF CTS, desc=FF_CTS -GPIO: 36, dir=0, set=0, clr=0, alt=FF DCD, desc=FF_DCD -GPIO: 37, dir=0, set=0, clr=0, alt=FF DSR, desc=FF_DSR -GPIO: 38, dir=0, set=0, clr=0, alt=FF RI, desc=FF_RI -GPIO: 39, dir=1, set=0, clr=0, alt=FF TXD, desc=FF_TXD -GPIO: 40, dir=1, set=0, clr=0, alt=FF DTR, desc=FF_DTR -GPIO: 41, dir=1, set=0, clr=0, alt=FF RTS, desc=FF_RTS -GPIO: 42, dir=0, set=0, clr=0, alt=BT RXD, desc=BT_RXD -GPIO: 43, dir=1, set=0, clr=0, alt=BT TXD, desc=BT_TXD -GPIO: 44, dir=0, set=0, clr=0, alt=BT CTS, desc=BT_CTS -GPIO: 45, dir=1, set=0, clr=0, alt=BT RTS, desc=BT_RTS -GPIO: 46, dir=0, set=0, clr=0, alt=STD RXD, desc=IR_RXD -GPIO: 47, dir=1, set=0, clr=0, alt=STD TXD, desc=IR_TXD -GPIO: 48, dir=1, set=1, clr=0, alt=nPOE, desc=PCC_OE# -GPIO: 49, dir=1, set=1, clr=0, alt=nPWE, desc=PCC_WE# -GPIO: 50, dir=1, set=1, clr=0, alt=nPIOR, desc=PCC_IOR# -GPIO: 51, dir=1, set=1, clr=0, alt=nPIOW, desc=PCC_IOW# -GPIO: 52, dir=1, set=1, clr=0, alt=nPCE[1], desc=PCC_CE1# -GPIO: 53, dir=1, set=1, clr=0, alt=nPCE[2], desc=PCC_CE2# -GPIO: 54, dir=1, set=0, clr=0, alt=nPSKSEL, desc=PCC_SCKSEL -GPIO: 55, dir=1, set=0, clr=0, alt=nPREG, desc=PCC_REG# -GPIO: 56, dir=0, set=0, clr=0, alt=nPWAIT, desc=PCC_WAIT# -GPIO: 57, dir=0, set=0, clr=0, alt=nIOIS16, desc=PCC_IOIS16# -GPIO: 58, dir=1, set=0, clr=0, alt=LDD[0], desc=LDD0 -GPIO: 59, dir=1, set=0, clr=0, alt=LDD[1], desc=LDD1 -GPIO: 60, dir=1, set=0, clr=0, alt=LDD[2], desc=LDD2 -GPIO: 61, dir=1, set=0, clr=0, alt=LDD[3], desc=LDD3 -GPIO: 62, dir=1, set=0, clr=0, alt=LDD[4], desc=LDD4 -GPIO: 63, dir=1, set=0, clr=0, alt=LDD[5], desc=LDD5 -GPIO: 64, dir=1, set=0, clr=0, alt=LDD[6], desc=LDD6 -GPIO: 65, dir=1, set=0, clr=0, alt=LDD[7], desc=LDD7 -GPIO: 66, dir=1, set=0, clr=0, alt=LDD[8], desc=LDD8 -GPIO: 67, dir=1, set=0, clr=0, alt=LDD[9], desc=LDD9 -GPIO: 68, dir=1, set=0, clr=0, alt=LDD[10], desc=LDD10 -GPIO: 69, dir=1, set=0, clr=0, alt=LDD[11], desc=LDD11 -GPIO: 70, dir=1, set=0, clr=0, alt=LDD[12], desc=LDD12 -GPIO: 71, dir=1, set=0, clr=0, alt=LDD[13], desc=LDD13 -GPIO: 72, dir=1, set=0, clr=0, alt=LDD[14], desc=LDD14 -GPIO: 73, dir=1, set=0, clr=0, alt=LDD[15], desc=LDD15 -GPIO: 74, dir=1, set=0, clr=0, alt=LCD_FCLK, desc=FCLK -GPIO: 75, dir=1, set=0, clr=0, alt=LCD_LCLK, desc=LCLK -GPIO: 76, dir=1, set=0, clr=0, alt=LCD_PCLK, desc=PCLK -GPIO: 77, dir=1, set=0, clr=0, alt=LCD_ACBIAS, desc=ACBIAS -GPIO: 78, dir=1, set=1, clr=0, alt=nCS_2, desc=CS2# -GPIO: 79, dir=1, set=1, clr=0, alt=nCS_3, desc=CS3# -GPIO: 80, dir=1, set=1, clr=0, alt=nCS_4, desc=CS4# -GPIO: 81, dir=0, set=0, clr=0, alt=gpio, desc= -GPIO: 82, dir=0, set=0, clr=0, alt=gpio, desc= -GPIO: 83, dir=0, set=0, clr=0, alt=gpio, desc= -GPIO: 84, dir=0, set=0, clr=0, alt=gpio, desc= diff --git a/board/pxa255_idp/pxa_reg_calcs.py b/board/pxa255_idp/pxa_reg_calcs.py deleted file mode 100644 index 4a721d1b04..0000000000 --- a/board/pxa255_idp/pxa_reg_calcs.py +++ /dev/null @@ -1,298 +0,0 @@ -#!/usr/bin/python - -# (C) Copyright 2004 -# BEC Systems <http://bec-systems.com> -# Cliff Brake <cliff.brake@gmail.com> - -# SPDX-License-Identifier: GPL-2.0+ - -# calculations for PXA255 registers - -class gpio: - dir = '0' - set = '0' - clr = '0' - alt = '0' - desc = '' - - def __init__(self, dir=0, set=0, clr=0, alt=0, desc=''): - self.dir = dir - self.set = set - self.clr = clr - self.alt = alt - self.desc = desc - - -# the following is a dictionary of all GPIOs in the system -# the key is the GPIO number - - -pxa255_alt_func = { - 0: ['gpio', 'none', 'none', 'none'], - 1: ['gpio', 'gpio reset', 'none', 'none'], - 2: ['gpio', 'none', 'none', 'none'], - 3: ['gpio', 'none', 'none', 'none'], - 4: ['gpio', 'none', 'none', 'none'], - 5: ['gpio', 'none', 'none', 'none'], - 6: ['gpio', 'MMC clk', 'none', 'none'], - 7: ['gpio', '48MHz clock', 'none', 'none'], - 8: ['gpio', 'MMC CS0', 'none', 'none'], - 9: ['gpio', 'MMC CS1', 'none', 'none'], - 10: ['gpio', 'RTC Clock', 'none', 'none'], - 11: ['gpio', '3.6MHz', 'none', 'none'], - 12: ['gpio', '32KHz', 'none', 'none'], - 13: ['gpio', 'none', 'MBGNT', 'none'], - 14: ['gpio', 'MBREQ', 'none', 'none'], - 15: ['gpio', 'none', 'nCS_1', 'none'], - 16: ['gpio', 'none', 'PWM0', 'none'], - 17: ['gpio', 'none', 'PWM1', 'none'], - 18: ['gpio', 'RDY', 'none', 'none'], - 19: ['gpio', 'DREQ[1]', 'none', 'none'], - 20: ['gpio', 'DREQ[0]', 'none', 'none'], - 21: ['gpio', 'none', 'none', 'none'], - 22: ['gpio', 'none', 'none', 'none'], - 23: ['gpio', 'none', 'SSP SCLK', 'none'], - 24: ['gpio', 'none', 'SSP SFRM', 'none'], - 25: ['gpio', 'none', 'SSP TXD', 'none'], - 26: ['gpio', 'SSP RXD', 'none', 'none'], - 27: ['gpio', 'SSP EXTCLK', 'none', 'none'], - 28: ['gpio', 'AC97 bitclk in, I2S bitclock out', 'I2S bitclock in', 'none'], - 29: ['gpio', 'AC97 SDATA_IN0', 'I2S SDATA_IN', 'none'], - 30: ['gpio', 'I2S SDATA_OUT', 'AC97 SDATA_OUT', 'none'], - 31: ['gpio', 'I2S SYNC', 'AC97 SYNC', 'none'], - 32: ['gpio', 'AC97 SDATA_IN1', 'I2S SYSCLK', 'none'], - 33: ['gpio', 'none', 'nCS_5', 'none'], - 34: ['gpio', 'FF RXD', 'MMC CS0', 'none'], - 35: ['gpio', 'FF CTS', 'none', 'none'], - 36: ['gpio', 'FF DCD', 'none', 'none'], - 37: ['gpio', 'FF DSR', 'none', 'none'], - 38: ['gpio', 'FF RI', 'none', 'none'], - 39: ['gpio', 'MMC CS1', 'FF TXD', 'none'], - 40: ['gpio', 'none', 'FF DTR', 'none'], - 41: ['gpio', 'none', 'FF RTS', 'none'], - 42: ['gpio', 'BT RXD', 'none', 'HW RXD'], - 43: ['gpio', 'none', 'BT TXD', 'HW TXD'], - 44: ['gpio', 'BT CTS', 'none', 'HW CTS'], - 45: ['gpio', 'none', 'BT RTS', 'HW RTS'], - 46: ['gpio', 'ICP_RXD', 'STD RXD', 'none'], - 47: ['gpio', 'STD TXD', 'ICP_TXD', 'none'], - 48: ['gpio', 'HW TXD', 'nPOE', 'none'], - 49: ['gpio', 'HW RXD', 'nPWE', 'none'], - 50: ['gpio', 'HW CTS', 'nPIOR', 'none'], - 51: ['gpio', 'nPIOW', 'HW RTS', 'none'], - 52: ['gpio', 'none', 'nPCE[1]', 'none'], - 53: ['gpio', 'MMC CLK', 'nPCE[2]', 'none'], - 54: ['gpio', 'MMC CLK', 'nPSKSEL', 'none'], - 55: ['gpio', 'none', 'nPREG', 'none'], - 56: ['gpio', 'nPWAIT', 'none', 'none'], - 57: ['gpio', 'nIOIS16', 'none', 'none'], - 58: ['gpio', 'none', 'LDD[0]', 'none'], - 59: ['gpio', 'none', 'LDD[1]', 'none'], - 60: ['gpio', 'none', 'LDD[2]', 'none'], - 61: ['gpio', 'none', 'LDD[3]', 'none'], - 62: ['gpio', 'none', 'LDD[4]', 'none'], - 63: ['gpio', 'none', 'LDD[5]', 'none'], - 64: ['gpio', 'none', 'LDD[6]', 'none'], - 65: ['gpio', 'none', 'LDD[7]', 'none'], - 66: ['gpio', 'MBREQ', 'LDD[8]', 'none'], - 67: ['gpio', 'MMC CS0', 'LDD[9]', 'none'], - 68: ['gpio', 'MMC CS1', 'LDD[10]', 'none'], - 69: ['gpio', 'MMC CLK', 'LDD[11]', 'none'], - 70: ['gpio', 'RTC CLK', 'LDD[12]', 'none'], - 71: ['gpio', '3.6 MHz', 'LDD[13]', 'none'], - 72: ['gpio', '32 KHz', 'LDD[14]', 'none'], - 73: ['gpio', 'MBGNT', 'LDD[15]', 'none'], - 74: ['gpio', 'none', 'LCD_FCLK', 'none'], - 75: ['gpio', 'none', 'LCD_LCLK', 'none'], - 76: ['gpio', 'none', 'LCD_PCLK', 'none'], - 77: ['gpio', 'none', 'LCD_ACBIAS', 'none'], - 78: ['gpio', 'none', 'nCS_2', 'none'], - 79: ['gpio', 'none', 'nCS_3', 'none'], - 80: ['gpio', 'none', 'nCS_4', 'none'], - 81: ['gpio', 'NSSPSCLK', 'none', 'none'], - 82: ['gpio', 'NSSPSFRM', 'none', 'none'], - 83: ['gpio', 'NSSPTXD', 'NSSPRXD', 'none'], - 84: ['gpio', 'NSSPTXD', 'NSSPRXD', 'none'], -} - - -#def __init__(self, dir=0, set=0, clr=0, alt=0, desc=''): - -gpio_list = [] - -for i in range(0,85): - gpio_list.append(gpio()) - -#chip select GPIOs -gpio_list[18] = gpio(0, 0, 0, 1, 'RDY') -gpio_list[33] = gpio(1, 1, 0, 2, 'CS5#') -gpio_list[80] = gpio(1, 1, 0, 2, 'CS4#') -gpio_list[79] = gpio(1, 1, 0, 2, 'CS3#') -gpio_list[78] = gpio(1, 1, 0, 2, 'CS2#') -gpio_list[15] = gpio(1, 1, 0, 2, 'CS1#') -gpio_list[22] = gpio(0, 0, 0, 0, 'Consumer IR, PCC_S1_IRQ_O#') -gpio_list[21] = gpio(0, 0, 0, 0, 'IRQ_IDE, PFI') -gpio_list[19] = gpio(0, 0, 0, 0, 'XB_DREQ1, PCC_SO_IRQ_O#') -gpio_list[20] = gpio(0, 0, 0, 0, 'XB_DREQ0') -gpio_list[20] = gpio(0, 0, 0, 0, 'XB_DREQ0') -gpio_list[17] = gpio(0, 0, 0, 0, 'IRQ_AXB') -gpio_list[16] = gpio(1, 0, 0, 2, 'PWM0') - -# PCMCIA stuff -gpio_list[57] = gpio(0, 0, 0, 1, 'PCC_IOIS16#') -gpio_list[56] = gpio(0, 0, 0, 1, 'PCC_WAIT#') -gpio_list[55] = gpio(1, 0, 0, 2, 'PCC_REG#') -gpio_list[54] = gpio(1, 0, 0, 2, 'PCC_SCKSEL') -gpio_list[53] = gpio(1, 1, 0, 2, 'PCC_CE2#') -gpio_list[52] = gpio(1, 1, 0, 2, 'PCC_CE1#') -gpio_list[51] = gpio(1, 1, 0, 1, 'PCC_IOW#') -gpio_list[50] = gpio(1, 1, 0, 2, 'PCC_IOR#') -gpio_list[49] = gpio(1, 1, 0, 2, 'PCC_WE#') -gpio_list[48] = gpio(1, 1, 0, 2, 'PCC_OE#') - -# SSP port -gpio_list[26] = gpio(0, 0, 0, 1, 'SSP_RXD') -gpio_list[25] = gpio(0, 0, 0, 0, 'SSP_TXD') -gpio_list[24] = gpio(1, 0, 1, 2, 'SSP_SFRM') -gpio_list[23] = gpio(1, 0, 1, 2, 'SSP_SCLK') -gpio_list[27] = gpio(0, 0, 0, 0, 'SSP_EXTCLK') - -# audio codec -gpio_list[32] = gpio(0, 0, 0, 0, 'AUD_SDIN1') -gpio_list[31] = gpio(1, 0, 0, 2, 'AC_SYNC') -gpio_list[30] = gpio(1, 0, 0, 2, 'AC_SDOUT') -gpio_list[29] = gpio(0, 0, 0, 1, 'AUD_SDIN0') -gpio_list[28] = gpio(0, 0, 0, 1, 'AC_BITCLK') - -# serial ports -gpio_list[39] = gpio(1, 0, 0, 2, 'FF_TXD') -gpio_list[34] = gpio(0, 0, 0, 1, 'FF_RXD') -gpio_list[41] = gpio(1, 0, 0, 2, 'FF_RTS') -gpio_list[35] = gpio(0, 0, 0, 1, 'FF_CTS') -gpio_list[40] = gpio(1, 0, 0, 2, 'FF_DTR') -gpio_list[37] = gpio(0, 0, 0, 1, 'FF_DSR') -gpio_list[38] = gpio(0, 0, 0, 1, 'FF_RI') -gpio_list[36] = gpio(0, 0, 0, 1, 'FF_DCD') - -gpio_list[43] = gpio(1, 0, 0, 2, 'BT_TXD') -gpio_list[42] = gpio(0, 0, 0, 1, 'BT_RXD') -gpio_list[45] = gpio(1, 0, 0, 2, 'BT_RTS') -gpio_list[44] = gpio(0, 0, 0, 1, 'BT_CTS') - -gpio_list[47] = gpio(1, 0, 0, 1, 'IR_TXD') -gpio_list[46] = gpio(0, 0, 0, 2, 'IR_RXD') - -# misc GPIO signals -gpio_list[14] = gpio(0, 0, 0, 0, 'MBREQ') -gpio_list[13] = gpio(0, 0, 0, 0, 'MBGNT') -gpio_list[12] = gpio(0, 0, 0, 0, 'GPIO_12/32K_CLK') -gpio_list[11] = gpio(0, 0, 0, 0, '3M6_CLK') -gpio_list[10] = gpio(1, 0, 1, 0, 'GPIO_10/RTC_CLK/debug LED') -gpio_list[9] = gpio(0, 0, 0, 0, 'MMC_CD#') -gpio_list[8] = gpio(0, 0, 0, 0, 'PCC_S1_CD#') -gpio_list[7] = gpio(0, 0, 0, 0, 'PCC_S0_CD#') -gpio_list[6] = gpio(1, 0, 0, 1, 'MMC_CLK') -gpio_list[5] = gpio(0, 0, 0, 0, 'IRQ_TOUCH#') -gpio_list[4] = gpio(0, 0, 0, 0, 'IRQ_ETH') -gpio_list[3] = gpio(0, 0, 0, 0, 'MQ_IRQ#') -gpio_list[2] = gpio(0, 0, 0, 0, 'BAT_DATA') -gpio_list[1] = gpio(0, 0, 0, 1, 'USER_RESET#') -gpio_list[0] = gpio(0, 0, 0, 1, 'USER_RESET#') - -# LCD GPIOs -gpio_list[58] = gpio(1, 0, 0, 2, 'LDD0') -gpio_list[59] = gpio(1, 0, 0, 2, 'LDD1') -gpio_list[60] = gpio(1, 0, 0, 2, 'LDD2') -gpio_list[61] = gpio(1, 0, 0, 2, 'LDD3') -gpio_list[62] = gpio(1, 0, 0, 2, 'LDD4') -gpio_list[63] = gpio(1, 0, 0, 2, 'LDD5') -gpio_list[64] = gpio(1, 0, 0, 2, 'LDD6') -gpio_list[65] = gpio(1, 0, 0, 2, 'LDD7') -gpio_list[66] = gpio(1, 0, 0, 2, 'LDD8') -gpio_list[67] = gpio(1, 0, 0, 2, 'LDD9') -gpio_list[68] = gpio(1, 0, 0, 2, 'LDD10') -gpio_list[69] = gpio(1, 0, 0, 2, 'LDD11') -gpio_list[70] = gpio(1, 0, 0, 2, 'LDD12') -gpio_list[71] = gpio(1, 0, 0, 2, 'LDD13') -gpio_list[72] = gpio(1, 0, 0, 2, 'LDD14') -gpio_list[73] = gpio(1, 0, 0, 2, 'LDD15') -gpio_list[74] = gpio(1, 0, 0, 2, 'FCLK') -gpio_list[75] = gpio(1, 0, 0, 2, 'LCLK') -gpio_list[76] = gpio(1, 0, 0, 2, 'PCLK') -gpio_list[77] = gpio(1, 0, 0, 2, 'ACBIAS') - -# calculate registers -pxa_regs = { - 'gpdr0':0, 'gpdr1':0, 'gpdr2':0, - 'gpsr0':0, 'gpsr1':0, 'gpsr2':0, - 'gpcr0':0, 'gpcr1':0, 'gpcr2':0, - 'gafr0_l':0, 'gafr0_u':0, - 'gafr1_l':0, 'gafr1_u':0, - 'gafr2_l':0, 'gafr2_u':0, -} - -# U-boot define names -uboot_reg_names = { - 'gpdr0':'CONFIG_SYS_GPDR0_VAL', 'gpdr1':'CONFIG_SYS_GPDR1_VAL', 'gpdr2':'CONFIG_SYS_GPDR2_VAL', - 'gpsr0':'CONFIG_SYS_GPSR0_VAL', 'gpsr1':'CONFIG_SYS_GPSR1_VAL', 'gpsr2':'CONFIG_SYS_GPSR2_VAL', - 'gpcr0':'CONFIG_SYS_GPCR0_VAL', 'gpcr1':'CONFIG_SYS_GPCR1_VAL', 'gpcr2':'CONFIG_SYS_GPCR2_VAL', - 'gafr0_l':'CONFIG_SYS_GAFR0_L_VAL', 'gafr0_u':'CONFIG_SYS_GAFR0_U_VAL', - 'gafr1_l':'CONFIG_SYS_GAFR1_L_VAL', 'gafr1_u':'CONFIG_SYS_GAFR1_U_VAL', - 'gafr2_l':'CONFIG_SYS_GAFR2_L_VAL', 'gafr2_u':'CONFIG_SYS_GAFR2_U_VAL', -} - -# bit mappings - -bit_mappings = [ - -{ 'gpio':(0,32), 'shift':1, 'regs':{'dir':'gpdr0', 'set':'gpsr0', 'clr':'gpcr0'} }, -{ 'gpio':(32,64), 'shift':1, 'regs':{'dir':'gpdr1', 'set':'gpsr1', 'clr':'gpcr1'} }, -{ 'gpio':(64,85), 'shift':1, 'regs':{'dir':'gpdr2', 'set':'gpsr2', 'clr':'gpcr2'} }, -{ 'gpio':(0,16), 'shift':2, 'regs':{'alt':'gafr0_l'} }, -{ 'gpio':(16,32), 'shift':2, 'regs':{'alt':'gafr0_u'} }, -{ 'gpio':(32,48), 'shift':2, 'regs':{'alt':'gafr1_l'} }, -{ 'gpio':(48,64), 'shift':2, 'regs':{'alt':'gafr1_u'} }, -{ 'gpio':(64,80), 'shift':2, 'regs':{'alt':'gafr2_l'} }, -{ 'gpio':(80,85), 'shift':2, 'regs':{'alt':'gafr2_u'} }, - -] - -def stuff_bits(bit_mapping, gpio_list): - gpios = range( bit_mapping['gpio'][0], bit_mapping['gpio'][1]) - - for gpio in gpios: - for reg in bit_mapping['regs'].keys(): - value = eval( 'gpio_list[gpio].%s' % (reg) ) - if ( value ): - # we have a high bit - bit_shift = (gpio - bit_mapping['gpio'][0]) * bit_mapping['shift'] - bit = value << (bit_shift) - pxa_regs[bit_mapping['regs'][reg]] |= bit - -for i in bit_mappings: - stuff_bits(i, gpio_list) - -# now print out all regs -registers = pxa_regs.keys() -registers.sort() -for reg in registers: - print '%s: 0x%x' % (reg, pxa_regs[reg]) - -# print define to past right into U-Boot source code - -print -print - -for reg in registers: - print '#define %s 0x%x' % (uboot_reg_names[reg], pxa_regs[reg]) - -# print all GPIOS -print -print - -for i in range(len(gpio_list)): - gpio_i = gpio_list[i] - alt_func_desc = pxa255_alt_func[i][gpio_i.alt] - print 'GPIO: %i, dir=%i, set=%i, clr=%i, alt=%s, desc=%s' % (i, gpio_i.dir, gpio_i.set, gpio_i.clr, alt_func_desc, gpio_i.desc) - - diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index d21750e2a0..6d7be11518 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -10,6 +10,7 @@ #include <fdt_support.h> #include <fdt_simplefb.h> #include <lcd.h> +#include <memalign.h> #include <mmc.h> #include <asm/gpio.h> #include <asm/arch/mbox.h> diff --git a/board/renesas/stout/Kconfig b/board/renesas/stout/Kconfig new file mode 100644 index 0000000000..cbbc6dd9e4 --- /dev/null +++ b/board/renesas/stout/Kconfig @@ -0,0 +1,12 @@ +if TARGET_STOUT + +config SYS_BOARD + default "stout" + +config SYS_VENDOR + default "renesas" + +config SYS_CONFIG_NAME + default "stout" + +endif diff --git a/board/renesas/stout/MAINTAINERS b/board/renesas/stout/MAINTAINERS new file mode 100644 index 0000000000..b7098e7955 --- /dev/null +++ b/board/renesas/stout/MAINTAINERS @@ -0,0 +1,6 @@ +STOUT BOARD +M: Cogent Embedded, Inc. <source@cogentembedded.com> +S: Maintained +F: board/renesas/stout/ +F: include/configs/stout.h +F: configs/stout_defconfig diff --git a/board/renesas/stout/Makefile b/board/renesas/stout/Makefile new file mode 100644 index 0000000000..e78f80c361 --- /dev/null +++ b/board/renesas/stout/Makefile @@ -0,0 +1,11 @@ +# +# board/renesas/stout/Makefile +# +# Copyright (C) 2015 Renesas Electronics Europe GmbH +# Copyright (C) 2015 Renesas Electronics Corporation +# Copyright (C) 2015 Cogent Embedded, Inc. +# +# SPDX-License-Identifier: GPL-2.0 +# + +obj-y := stout.o cpld.o qos.o ../rcar-gen2-common/common.o diff --git a/board/renesas/stout/cpld.c b/board/renesas/stout/cpld.c new file mode 100644 index 0000000000..5640e1d28e --- /dev/null +++ b/board/renesas/stout/cpld.c @@ -0,0 +1,167 @@ +/* + * Stout board CPLD access support + * + * Copyright (C) 2015 Renesas Electronics Europe GmbH + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include "cpld.h" + +#define SCLK GPIO_GP_3_24 +#define SSTBZ GPIO_GP_3_25 +#define MOSI GPIO_GP_3_26 +#define MISO GPIO_GP_3_27 + +#define CPLD_ADDR_MODE 0x00 /* RW */ +#define CPLD_ADDR_MUX 0x01 /* RW */ +#define CPLD_ADDR_HDMI 0x02 /* RW */ +#define CPLD_ADDR_DIPSW 0x08 /* R */ +#define CPLD_ADDR_RESET 0x80 /* RW */ +#define CPLD_ADDR_VERSION 0xFF /* R */ + +static u32 cpld_read(u8 addr) +{ + int i; + u32 data = 0; + + for (i = 0; i < 8; i++) { + gpio_set_value(MOSI, addr & 0x80); /* MSB first */ + gpio_set_value(SCLK, 1); + addr <<= 1; + gpio_set_value(SCLK, 0); + } + + gpio_set_value(MOSI, 0); /* READ */ + gpio_set_value(SSTBZ, 0); + gpio_set_value(SCLK, 1); + gpio_set_value(SCLK, 0); + gpio_set_value(SSTBZ, 1); + + for (i = 0; i < 32; i++) { + gpio_set_value(SCLK, 1); + data <<= 1; + data |= gpio_get_value(MISO); /* MSB first */ + gpio_set_value(SCLK, 0); + } + + return data; +} + +static void cpld_write(u8 addr, u32 data) +{ + int i; + + for (i = 0; i < 32; i++) { + gpio_set_value(MOSI, data & (1 << 31)); /* MSB first */ + gpio_set_value(SCLK, 1); + data <<= 1; + gpio_set_value(SCLK, 0); + } + + for (i = 0; i < 8; i++) { + gpio_set_value(MOSI, addr & 0x80); /* MSB first */ + gpio_set_value(SCLK, 1); + addr <<= 1; + gpio_set_value(SCLK, 0); + } + + gpio_set_value(MOSI, 1); /* WRITE */ + gpio_set_value(SSTBZ, 0); + gpio_set_value(SCLK, 1); + gpio_set_value(SCLK, 0); + gpio_set_value(SSTBZ, 1); +} + +/* LSI pin pull-up control */ +#define PUPR3 0xe606010C +#define PUPR3_SD3_DAT1 (1 << 27) + +void cpld_init(void) +{ + u32 val; + + /* PULL-UP on MISO line */ + val = readl(PUPR3); + val |= PUPR3_SD3_DAT1; + writel(val, PUPR3); + + gpio_request(SCLK, NULL); + gpio_request(SSTBZ, NULL); + gpio_request(MOSI, NULL); + gpio_request(MISO, NULL); + + gpio_direction_output(SCLK, 0); + gpio_direction_output(SSTBZ, 1); + gpio_direction_output(MOSI, 0); + gpio_direction_input(MISO); + + /* dummy read */ + cpld_read(CPLD_ADDR_VERSION); + + printf("CPLD version: 0x%08x\n", + cpld_read(CPLD_ADDR_VERSION)); + printf("H2 Mode setting (MD0..28): 0x%08x\n", + cpld_read(CPLD_ADDR_MODE)); + printf("Multiplexer settings: 0x%08x\n", + cpld_read(CPLD_ADDR_MUX)); + printf("HDMI setting: 0x%08x\n", + cpld_read(CPLD_ADDR_HDMI)); + printf("DIPSW (SW3): 0x%08x\n", + cpld_read(CPLD_ADDR_DIPSW)); + +#ifdef CONFIG_SH_SDHI + /* switch MUX to SD0 */ + val = cpld_read(CPLD_ADDR_MUX); + val &= ~MUX_MSK_SD0; + val |= MUX_VAL_SD0; + cpld_write(CPLD_ADDR_MUX, val); +#endif +} + +static int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u32 addr, val; + + if (argc < 3) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[2], NULL, 16); + if (!(addr == CPLD_ADDR_VERSION || addr == CPLD_ADDR_MODE || + addr == CPLD_ADDR_MUX || addr == CPLD_ADDR_HDMI || + addr == CPLD_ADDR_DIPSW || addr == CPLD_ADDR_RESET)) { + printf("cpld invalid addr\n"); + return CMD_RET_USAGE; + } + + if (argc == 3 && strcmp(argv[1], "read") == 0) { + printf("0x%x\n", cpld_read(addr)); + } else if (argc == 4 && strcmp(argv[1], "write") == 0) { + val = simple_strtoul(argv[3], NULL, 16); + if (addr == CPLD_ADDR_MUX) { + /* never mask SCIFA0 console */ + val &= ~MUX_MSK_SCIFA0_USB; + val |= MUX_VAL_SCIFA0_USB; + } + cpld_write(addr, val); + } + + return 0; +} + +U_BOOT_CMD( + cpld, 4, 1, do_cpld, + "CPLD access", + "read addr\n" + "cpld write addr val\n" +); + +void reset_cpu(ulong addr) +{ + cpld_write(CPLD_ADDR_RESET, 1); +} diff --git a/board/renesas/stout/cpld.h b/board/renesas/stout/cpld.h new file mode 100644 index 0000000000..a2656704a1 --- /dev/null +++ b/board/renesas/stout/cpld.h @@ -0,0 +1,183 @@ +/* + * Stout board CPLD definition + * + * Copyright (C) 2015 Renesas Electronics Europe GmbH + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _CPLD_H_ +#define _CPLD_H_ + +/* power-up behaviour */ +#define MODE_MSK_FREE_RUN 0x00000001 +#define MODE_VAL_FREE_RUN 0x00000000 +#define MODE_MSK_STEP_UP 0x00000001 +#define MODE_VAL_STEP_UP 0x00000000 + +/* boot source */ +#define MODE_MSK_BOOT_SQPI_16KB_FAST 0x0000000E +#define MODE_VAL_BOOT_SQPI_16KB_FAST 0x00000004 +#define MODE_MSK_BOOT_SQPI_16KB_SLOW 0x0000000E +#define MODE_VAL_BOOT_SQPI_16KB_SLOW 0x00000008 +#define MODE_MSK_BOOT_SQPI_4KB_SLOW 0x0000000E +#define MODE_VAL_BOOT_SQPI_4KB_SLOW 0x0000000C + +/* booting CPU */ +#define MODE_MSK_BOOT_CA15 0x000000C0 +#define MODE_VAL_BOOT_CA15 0x00000000 +#define MODE_MSK_BOOT_CA7 0x000000C0 +#define MODE_VAL_BOOT_CA7 0x00000040 +#define MODE_MSK_BOOT_SH4 0x000000C0 +#define MODE_VAL_BOOT_SH4 0x000000C0 + +/* JTAG connection */ +#define MODE_MSK_JTAG_CORESIGHT 0xC0301C00 +#define MODE_VAL_JTAG_CORESIGHT 0x00200000 +#define MODE_MSK_JTAG_SH4 0xC0301C00 +#define MODE_VAL_JTAG_SH4 0x00300000 + +/* DDR3 (PLL) speed */ +#define MODE_MSK_DDR3_1600 0x00080000 +#define MODE_VAL_DDR3_1600 0x00000000 +#define MODE_MSK_DDR3_1333 0x00080000 +#define MODE_VAL_DDR3_1333 0x00080000 + +/* ComboPhy0 mode */ +#define MODE_MSK_PHY0_SATA0 0x01000000 +#define MODE_VAL_PHY0_SATA0 0x00000000 +#define MODE_MSK_PHY0_PCIE 0x01000000 +#define MODE_VAL_PHY0_PCIE 0x01000000 + +/* ComboPhy1 mode */ +#define MODE_MSK_PHY1_SATA1 0x00800000 +#define MODE_VAL_PHY1_SATA1 0x00000000 +#define MODE_MSK_PHY1_USB3 0x00800000 +#define MODE_VAL_PHY1_USB3 0x00800000 + +/* + * Illegal multiplexer combinations. + * MUX Conflicts + * name with any one of + * VIN0_BT656 VIN0_full, SD2 + * VIN0_full VIN0_BT656, SD2, AVB, VIN2_(all) + * VIN1_BT656 VIN1_(others), SD0 + * VIN1_10bit VIN1_(others), SD0, VIN3_with*, I2C1 + * VIN1_12bit VIN1_(others), SD0, VIN3_with*, I2C1, SCIFA0_(all) + * VIN2_BT656 VIN0_full, VIN2_(others), AVB, + * VIN2_withSYNC VIN0_full, VIN2_(others), AVB, I2C1, SCIFA0_(all), + * VIN3_with* + * VIN2_withFIELD VIN0_full, VIN2_(others), AVB, SQPI_(all) + * VIN2_withSYNCandFIELD VIN0_full, VIN2_(others), AVB, SQPI_(all), I2C1, + * SCIFA0_(all), VIN3_with* + * VIN3_BT656 VIN3_(others), IRQ3 + * VIN3_withFIELD VIN3_(others), IRQ3, VIN1_12bit, VIN2_withSYNC, + * VIN2_withSYNCandFIELD, VIN1_10bit + * VIN3_withSYNCandFIELD VIN3_(others), IRQ3, VIN1_12bit, VIN2_withSYNC, + * VIN2_withSYNCandFIELD, VIN1_10bit, I2C1 + * AVB VIN0_full, VIN2_(all) + * QSPI_ONBOARD VIN2_withFIELD, VIN2_withSYNCandFIELD, QSPI_COMEXPRESS + * QSPI_COMEXPRESS VIN2_withFIELD, VIN2_withSYNCandFIELD, QSPI_ONBOARD + * I2C1 VIN1_12bit, VIN2_withSYNC, VIN2_withSYNCandFIELD, + * VIN3_withSYNCandFIELD + * IRQ3 VIN3_(all) + * SCIFA0_USB VIN1_12bit, VIN2_withSYNC, VIN2_withSYNCandFIELD, + * SCIFA0_COMEXPRESS + * SCIFA0_COMEXPRESS VIN1_12bit, VIN2_withSYNC, VIN2_withSYNCandFIELD, + * SCIFA0_USB + * SCIFA2 PWM210 + * ETH_ONBOARD ETH_COMEXPRESS + * ETH_COMEXPRESS ETH_ONBOARD + * SD0 VIN1_(all) + * SD2 VIN0_(all) + * PWM210 SCIFA2 + */ + +/* connected to COM Express connector and CN6 for camera, BT656 only */ +#define MUX_MSK_VIN0_BT656 0x00001001 +#define MUX_VAL_VIN0_BT656 0x00000000 +/* connected to COM Express connector and CN6 for camera, all modes */ +#define MUX_MSK_VIN0_full 0x00001007 +#define MUX_VAL_VIN0_full 0x00000002 +/* connected to COM Express connector, BT656 only */ +#define MUX_MSK_VIN1_BT656 0x00000801 +#define MUX_VAL_VIN1_BT656 0x00000800 +/* connected to COM Express connector, all 10-bit modes */ +#define MUX_MSK_VIN1_10bit 0x00000821 +#define MUX_VAL_VIN1_10bit 0x00000800 +/* connected to COM Express connector, all 12-bit modes */ +#define MUX_MSK_VIN1_12bit 0x000008A1 +#define MUX_VAL_VIN1_12bit 0x00000880 +/* connected to COM Express connector, BT656 only */ +#define MUX_MSK_VIN2_BT656 0x00000007 +#define MUX_VAL_VIN2_BT656 0x00000006 +/* connected to COM Express connector, modes with sync signals */ +#define MUX_MSK_VIN2_withSYNC 0x000000A7 +#define MUX_VAL_VIN2_withSYNC 0x00000086 +/* connected to COM Express connector, modes with field, clken signals */ +#define MUX_MSK_VIN2_withFIELD 0x0000000F +#define MUX_VAL_VIN2_withFIELD 0x0000000E +/* connected to COM Express connector, modes with sync, field, clken signals */ +#define MUX_MSK_VIN2_withSYNCandFIELD 0x000000AF +#define MUX_VAL_VIN2_withSYNCandFIELD 0x0000008E +/* connected to COM Express connector, BT656 only */ +#define MUX_MSK_VIN3_BT656 0x00000101 +#define MUX_VAL_VIN3_BT656 0x00000100 +/* connected to COM Express connector, modes with field, clken signals */ +#define MUX_MSK_VIN3_withFIELD 0x00000121 +#define MUX_VAL_VIN3_withFIELD 0x00000120 +/* connected to COM Express connector, modes with sync, field, clken signals */ +#define MUX_MSK_VIN3_withSYNCandFIELD 0x00000161 +#define MUX_VAL_VIN3_withSYNCandFIELD 0x00000120 +/* connected to COM Express connector (RGMII) */ +#define MUX_MSK_AVB 0x00000003 +#define MUX_VAL_AVB 0x00000000 +/* connected to on-board QSPI flash */ +#define MUX_MSK_QSPI_ONBOARD 0x00000019 +#define MUX_VAL_QSPI_ONBOARD 0x00000000 +/* connected to COM Express connector */ +#define MUX_MSK_QSPI_COMEXPRESS 0x00000019 +#define MUX_VAL_QSPI_COMEXPRESS 0x00000010 +/* connected to COM Express connector and PMIC */ +#define MUX_MSK_I2C1 0x00000061 +#define MUX_VAL_I2C1 0x00000060 +/* connected to HDMI driver */ +#define MUX_MSK_IRQ3 0x00000101 +#define MUX_VAL_IRQ3 0x00000000 +/* connected to USB/FTDI */ +#define MUX_MSK_SCIFA0_USB 0x00004081 +#define MUX_VAL_SCIFA0_USB 0x00004000 +/* connected to COM Express connector */ +#define MUX_MSK_SCIFA0_COMEXPRESS 0x00004081 +#define MUX_VAL_SCIFA0_COMEXPRESS 0x00000000 +/* connected to COM Express connector */ +#define MUX_MSK_SCIFA2 0x00002001 +#define MUX_VAL_SCIFA2 0x00000000 +/* connected to on-board 10/100 Phy */ +#define MUX_MSK_ETH_ONBOARD 0x00000600 +#define MUX_VAL_ETH_ONBOARD 0x00000000 +/* connected to COM Express connector (RMII) */ +#define MUX_MSK_ETH_COMEXPRESS 0x00000600 +#define MUX_VAL_ETH_COMEXPRESS 0x00000400 +/* connected to on-board MicroSD slot */ +#define MUX_MSK_SD0 0x00000801 +#define MUX_VAL_SD0 0x00000000 +/* connected to COM Express connector */ +#define MUX_MSK_SD2 0x00001001 +#define MUX_VAL_SD2 0x00001000 +/* connected to COM Express connector */ +#define MUX_MSK_PWM210 0x00002001 +#define MUX_VAL_PWM210 0x00002000 + +#define HDMI_MSK 0x07 +#define HDMI_OFF 0x00 +#define HDMI_ONBOARD 0x07 +#define HDMI_COMEXPRESS 0x05 +#define HDMI_ONBOARD_NODDC 0x03 +#define HDMI_COMEXPRESS_NODDC 0x01 + +void cpld_init(void); + +#endif /* _CPLD_H_ */ diff --git a/board/renesas/stout/qos.c b/board/renesas/stout/qos.c new file mode 100644 index 0000000000..d49a0ab72b --- /dev/null +++ b/board/renesas/stout/qos.c @@ -0,0 +1,2435 @@ +/* + * board/renesas/stout/qos.c + * + * Copyright (C) 2015 Renesas Electronics Europe GmbH + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include <asm/arch/rmobile.h> + +/* QoS version 0.955 for ES1 and version 0.973 for ES2 */ +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +enum { + DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04, + DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09, + DBSC3_10, DBSC3_11, DBSC3_12, DBSC3_13, DBSC3_14, + DBSC3_15, + DBSC3_NR, +}; + +static u32 dbsc3_0_r_qos_addr[DBSC3_NR] = { + [DBSC3_00] = DBSC3_0_QOS_R0_BASE, + [DBSC3_01] = DBSC3_0_QOS_R1_BASE, + [DBSC3_02] = DBSC3_0_QOS_R2_BASE, + [DBSC3_03] = DBSC3_0_QOS_R3_BASE, + [DBSC3_04] = DBSC3_0_QOS_R4_BASE, + [DBSC3_05] = DBSC3_0_QOS_R5_BASE, + [DBSC3_06] = DBSC3_0_QOS_R6_BASE, + [DBSC3_07] = DBSC3_0_QOS_R7_BASE, + [DBSC3_08] = DBSC3_0_QOS_R8_BASE, + [DBSC3_09] = DBSC3_0_QOS_R9_BASE, + [DBSC3_10] = DBSC3_0_QOS_R10_BASE, + [DBSC3_11] = DBSC3_0_QOS_R11_BASE, + [DBSC3_12] = DBSC3_0_QOS_R12_BASE, + [DBSC3_13] = DBSC3_0_QOS_R13_BASE, + [DBSC3_14] = DBSC3_0_QOS_R14_BASE, + [DBSC3_15] = DBSC3_0_QOS_R15_BASE, +}; + +static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = { + [DBSC3_00] = DBSC3_0_QOS_W0_BASE, + [DBSC3_01] = DBSC3_0_QOS_W1_BASE, + [DBSC3_02] = DBSC3_0_QOS_W2_BASE, + [DBSC3_03] = DBSC3_0_QOS_W3_BASE, + [DBSC3_04] = DBSC3_0_QOS_W4_BASE, + [DBSC3_05] = DBSC3_0_QOS_W5_BASE, + [DBSC3_06] = DBSC3_0_QOS_W6_BASE, + [DBSC3_07] = DBSC3_0_QOS_W7_BASE, + [DBSC3_08] = DBSC3_0_QOS_W8_BASE, + [DBSC3_09] = DBSC3_0_QOS_W9_BASE, + [DBSC3_10] = DBSC3_0_QOS_W10_BASE, + [DBSC3_11] = DBSC3_0_QOS_W11_BASE, + [DBSC3_12] = DBSC3_0_QOS_W12_BASE, + [DBSC3_13] = DBSC3_0_QOS_W13_BASE, + [DBSC3_14] = DBSC3_0_QOS_W14_BASE, + [DBSC3_15] = DBSC3_0_QOS_W15_BASE, +}; + +/* QoS version 0.955 for ES1 */ +static void qos_init_es1(void) +{ + int i; + struct rcar_s3c *s3c; + struct rcar_s3c_qos *s3c_qos; + struct rcar_dbsc3_qos *qos_addr; + struct rcar_mxi *mxi; + struct rcar_mxi_qos *mxi_qos; + struct rcar_axi_qos *axi_qos; + + /* DBSC DBADJ2 */ + writel(0x20042004, DBSC3_0_DBADJ2); + + /* S3C -QoS */ + s3c = (struct rcar_s3c *)S3C_BASE; + writel(0x80FF1C1E, &s3c->s3cadsplcr); + writel(0x1F060505, &s3c->s3crorr); + writel(0x1F020100, &s3c->s3cworr); + + /* QoS Control Registers */ + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI0_BASE; + writel(0x00800080, &s3c_qos->s3cqos0); + writel(0x22000010, &s3c_qos->s3cqos1); + writel(0x22002200, &s3c_qos->s3cqos2); + writel(0x2F002200, &s3c_qos->s3cqos3); + writel(0x2F002F00, &s3c_qos->s3cqos4); + writel(0x22000010, &s3c_qos->s3cqos5); + writel(0x22002200, &s3c_qos->s3cqos6); + writel(0x2F002200, &s3c_qos->s3cqos7); + writel(0x2F002F00, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI1_BASE; + writel(0x00800080, &s3c_qos->s3cqos0); + writel(0x22000010, &s3c_qos->s3cqos1); + writel(0x22002200, &s3c_qos->s3cqos2); + writel(0x2F002200, &s3c_qos->s3cqos3); + writel(0x2F002F00, &s3c_qos->s3cqos4); + writel(0x22000010, &s3c_qos->s3cqos5); + writel(0x22002200, &s3c_qos->s3cqos6); + writel(0x2F002200, &s3c_qos->s3cqos7); + writel(0x2F002F00, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE; + writel(0x80918099, &s3c_qos->s3cqos0); + writel(0x20410010, &s3c_qos->s3cqos1); + writel(0x200A2023, &s3c_qos->s3cqos2); + writel(0x20502001, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20410FFF, &s3c_qos->s3cqos5); + writel(0x200A2023, &s3c_qos->s3cqos6); + writel(0x20502001, &s3c_qos->s3cqos7); + writel(0x20142032, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE; + writel(0x00810089, &s3c_qos->s3cqos0); + writel(0x20410001, &s3c_qos->s3cqos1); + writel(0x200A2023, &s3c_qos->s3cqos2); + writel(0x20502001, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20410FFF, &s3c_qos->s3cqos5); + writel(0x200A2023, &s3c_qos->s3cqos6); + writel(0x20502001, &s3c_qos->s3cqos7); + writel(0x20142032, &s3c_qos->s3cqos8); + + writel(0x00200808, &s3c->s3carcr11); + + /* DBSC -QoS */ + /* DBSC0 - Read */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i]; + writel(0x00000203, &qos_addr->dblgcnt); + writel(0x00002064, &qos_addr->dbtmval0); + writel(0x00002048, &qos_addr->dbtmval1); + writel(0x00002032, &qos_addr->dbtmval2); + writel(0x00002019, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002019, &qos_addr->dbthres0); + writel(0x00002019, &qos_addr->dbthres1); + writel(0x00002019, &qos_addr->dbthres2); + writel(0x00000000, &qos_addr->dblgqon); + } + + /* DBSC0 - Write */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i]; + writel(0x00000203, &qos_addr->dblgcnt); + writel(0x00002064, &qos_addr->dbtmval0); + writel(0x00002048, &qos_addr->dbtmval1); + writel(0x00002032, &qos_addr->dbtmval2); + writel(0x00002019, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002019, &qos_addr->dbthres0); + writel(0x00002019, &qos_addr->dbthres1); + writel(0x00002019, &qos_addr->dbthres2); + writel(0x00000000, &qos_addr->dblgqon); + } + + /* CCI-400 -QoS */ + writel(0x20001000, CCI_400_MAXOT_1); + writel(0x20001000, CCI_400_MAXOT_2); + writel(0x0000000C, CCI_400_QOSCNTL_1); + writel(0x0000000C, CCI_400_QOSCNTL_2); + + /* MXI -QoS */ + /* Transaction Control (MXI) */ + mxi = (struct rcar_mxi *)MXI_BASE; + writel(0x00000013, &mxi->mxrtcr); + writel(0x00000013, &mxi->mxwtcr); + writel(0x00B800C0, &mxi->mxsaar0); + writel(0x02000800, &mxi->mxsaar1); + writel(0x00200000, &mxi->mxs3cracr); + writel(0x00200000, &mxi->mxs3cwacr); + writel(0x00200000, &mxi->mxaxiracr); + writel(0x00200000, &mxi->mxaxiwacr); + + /* QoS Control (MXI) */ + mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE; + writel(0x0000000C, &mxi_qos->vspdu0); + writel(0x0000000C, &mxi_qos->vspdu1); + writel(0x0000000D, &mxi_qos->du0); + writel(0x0000000D, &mxi_qos->du1); + + /* AXI -QoS */ + /* Transaction Control (MXI) */ + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SYX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_AVB_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200A, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_G2D_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200A, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002002, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX0_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX1_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_LBS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002002, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002002, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_PCI_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_RTX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200A, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200A, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB20_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002005, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB21_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002005, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB22_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002005, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB30_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (RT-AXI) */ + axi_qos = (struct rcar_axi_qos *)RT_AXI_SHX_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002005, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_RDS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_RTX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_STPRO_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002003, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (MP-AXI) */ + axi_qos = (struct rcar_axi_qos *)MP_AXI_ADSP_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000040, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000040, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_MLP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00001FF0, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00002001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_SPU_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_SPUC_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200D, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (SYS-AXI256) */ + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_AXI128TO256_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_SYX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MPX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (CCI-AXI) */ + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_SYX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x0000200F, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002001, &axi_qos->qosctset0); + writel(0x00002009, &axi_qos->qosctset1); + writel(0x00002003, &axi_qos->qosctset2); + writel(0x00002003, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (Media-AXI) */ + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002018, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VIN0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP2R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP2W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0R_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0W_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1R_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1W_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0R_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0W_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU1R_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU1W_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000200C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1VR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1VW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002007, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002006, &axi_qos->qosthres0); + writel(0x00002001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000000, &axi_qos->qosqon); +} + +#if defined(CONFIG_QOS_PRI_MEDIA) +#define is_qos_pri_media() 1 +#else +#define is_qos_pri_media() 0 +#endif + +#if defined(CONFIG_QOS_PRI_NORMAL) +#define is_qos_pri_normal() 1 +#else +#define is_qos_pri_normal() 0 +#endif + +#if defined(CONFIG_QOS_PRI_GFX) +#define is_qos_pri_gfx() 1 +#else +#define is_qos_pri_gfx() 0 +#endif + +/* QoS version 0.963 for ES2 */ +static void qos_init_es2(void) +{ + int i; + struct rcar_s3c *s3c; + struct rcar_s3c_qos *s3c_qos; + struct rcar_dbsc3_qos *qos_addr; + struct rcar_mxi *mxi; + struct rcar_mxi_qos *mxi_qos; + struct rcar_axi_qos *axi_qos; + + /* DBSC DBADJ2 */ + writel(0x20042004, DBSC3_0_DBADJ2); + + /* S3C -QoS */ + s3c = (struct rcar_s3c *)S3C_BASE; + writel(0x80000000, &s3c->s3cadsplcr); + if (is_qos_pri_media()) { + writel(0x1F060302, &s3c->s3crorr); + writel(0x07070302, &s3c->s3cworr); + } else if (is_qos_pri_normal()) { + writel(0x1F060504, &s3c->s3crorr); + writel(0x07070503, &s3c->s3cworr); + } else if (is_qos_pri_gfx()) { + writel(0x1F060606, &s3c->s3crorr); + writel(0x07070606, &s3c->s3cworr); + } + /* QoS Control Registers */ + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI0_BASE; + writel(0x00890089, &s3c_qos->s3cqos0); + writel(0x20960010, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + if (is_qos_pri_media()) + writel(0x20AA2300, &s3c_qos->s3cqos3); + else if (is_qos_pri_normal()) + writel(0x20AA2200, &s3c_qos->s3cqos3); + else if (is_qos_pri_gfx()) + writel(0x20AA2100, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960010, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + if (is_qos_pri_media()) + writel(0x20AA2300, &s3c_qos->s3cqos7); + else if (is_qos_pri_normal()) + writel(0x20AA2200, &s3c_qos->s3cqos7); + else if (is_qos_pri_gfx()) + writel(0x20AA2100, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI1_BASE; + writel(0x00890089, &s3c_qos->s3cqos0); + writel(0x20960010, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + if (is_qos_pri_media()) + writel(0x20AA2300, &s3c_qos->s3cqos3); + else if (is_qos_pri_normal()) + writel(0x20AA2200, &s3c_qos->s3cqos3); + else if (is_qos_pri_gfx()) + writel(0x20AA2100, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960010, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + if (is_qos_pri_media()) + writel(0x20AA2300, &s3c_qos->s3cqos7); + else if (is_qos_pri_normal()) + writel(0x20AA2200, &s3c_qos->s3cqos7); + else if (is_qos_pri_gfx()) + writel(0x20AA2100, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE; + writel(0x80928092, &s3c_qos->s3cqos0); + writel(0x20960020, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA20DC, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960020, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA20DC, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE; + writel(0x00828092, &s3c_qos->s3cqos0); + writel(0x20960020, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA20FA, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960020, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA20FA, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + writel(0x00310808, &s3c->s3carcr11); + + /* DBSC -QoS */ + /* DBSC0 - Read */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i]; + writel(0x00000002, &qos_addr->dblgcnt); + writel(0x00002096, &qos_addr->dbtmval0); + writel(0x00002064, &qos_addr->dbtmval1); + writel(0x00002032, &qos_addr->dbtmval2); + writel(0x00001FB0, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002078, &qos_addr->dbthres0); + writel(0x0000204B, &qos_addr->dbthres1); + writel(0x0000201E, &qos_addr->dbthres2); + writel(0x00000001, &qos_addr->dblgqon); + } + + /* DBSC0 - Write */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i]; + writel(0x00000002, &qos_addr->dblgcnt); + writel(0x00002096, &qos_addr->dbtmval0); + writel(0x00002064, &qos_addr->dbtmval1); + writel(0x00002050, &qos_addr->dbtmval2); + writel(0x0000203A, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002078, &qos_addr->dbthres0); + writel(0x0000204B, &qos_addr->dbthres1); + writel(0x0000203C, &qos_addr->dbthres2); + writel(0x00000001, &qos_addr->dblgqon); + } + + /* MXI -QoS */ + /* Transaction Control (MXI) */ + mxi = (struct rcar_mxi *)MXI_BASE; + writel(0x00000013, &mxi->mxrtcr); + writel(0x00000016, &mxi->mxwtcr); + writel(0x00B800C0, &mxi->mxsaar0); + writel(0x02000800, &mxi->mxsaar1); + + /* QoS Control (MXI) */ + mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE; + writel(0x0000000C, &mxi_qos->vspdu0); + writel(0x0000000C, &mxi_qos->vspdu1); + writel(0x0000000E, &mxi_qos->du0); + writel(0x0000000E, &mxi_qos->du1); + + /* AXI -QoS */ + /* Transaction Control (MXI) */ + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SYX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_AVB_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_G2D_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002021, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002037, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX0_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX1_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_LBS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002021, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002021, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_PCI_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_RTX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB20_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB21_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB22_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB30_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_AX2M_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_CC50_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002029, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_CCI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_CS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_DDM_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_ETH_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MPXM_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SAT0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SAT1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_TRAB_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (RT-AXI) */ + axi_qos = (struct rcar_axi_qos *)RT_AXI_SHX_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_DBG_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_RDM_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002299, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_RDS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002029, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_RTX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_STPRO_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002029, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_SY2RT_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (MP-AXI) */ + axi_qos = (struct rcar_axi_qos *)MP_AXI_ADSP_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002037, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000040, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000040, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_MLP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00001FF0, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00002001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_SPU_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_SPUC_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000206E, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (SYS-AXI256) */ + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_AXI128TO256_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_SYX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MPX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (CCI-AXI) */ + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_SYX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (Media-AXI) */ + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXR_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020dc, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x000020AA, &axi_qos->qosthres0); + writel(0x00002032, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXW_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020dc, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x000020AA, &axi_qos->qosthres0); + writel(0x00002032, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VIN0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00001FF0, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00002001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP2R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP2W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0R_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0W_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1R_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1W_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0R_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0W_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU1R_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU1W_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1VR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1VW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); +} + +void qos_init(void) +{ + if (rmobile_get_cpu_rev_integer() >= R8A7790_CUT_ES2X) + qos_init_es2(); + else + qos_init_es1(); +} +#else /* CONFIG_RMOBILE_EXTRAM_BOOT */ +void qos_init(void) +{ +} +#endif /* CONFIG_RMOBILE_EXTRAM_BOOT */ diff --git a/board/renesas/stout/qos.h b/board/renesas/stout/qos.h new file mode 100644 index 0000000000..645a5b01ed --- /dev/null +++ b/board/renesas/stout/qos.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2015 Renesas Electronics Europe GmbH + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __QOS_H__ +#define __QOS_H__ + +void qos_init(void); + +#endif diff --git a/board/renesas/stout/stout.c b/board/renesas/stout/stout.c new file mode 100644 index 0000000000..7df7394091 --- /dev/null +++ b/board/renesas/stout/stout.c @@ -0,0 +1,232 @@ +/* + * board/renesas/stout/stout.c + * This file is Stout board support. + * + * Copyright (C) 2015 Renesas Electronics Europe GmbH + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <malloc.h> +#include <netdev.h> +#include <dm.h> +#include <dm/platform_data/serial_sh.h> +#include <asm/processor.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/arch/rmobile.h> +#include <asm/arch/rcar-mstp.h> +#include <asm/arch/mmc.h> +#include <asm/arch/sh_sdhi.h> +#include <miiphy.h> +#include <i2c.h> +#include <mmc.h> +#include "qos.h" +#include "cpld.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define CLK2MHZ(clk) (clk / 1000 / 1000) +void s_init(void) +{ + struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; + struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; + + /* Watchdog init */ + writel(0xA5A5A500, &rwdt->rwtcsra); + writel(0xA5A5A500, &swdt->swtcsra); + + /* CPU frequency setting. Set to 1.4GHz */ + if (rmobile_get_cpu_rev_integer() >= R8A7790_CUT_ES2X) { + u32 stat = 0; + u32 stc = ((1400 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) + << PLL0_STC_BIT; + clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); + + do { + stat = readl(PLLECR) & PLL0ST; + } while (stat == 0x0); + } + + /* QoS(Quality-of-Service) Init */ + qos_init(); +} + +#define TMU0_MSTP125 (1 << 25) +#define SCIFA0_MSTP204 (1 << 4) +#define SDHI0_MSTP314 (1 << 14) +#define SDHI2_MSTP312 (1 << 12) +#define ETHER_MSTP813 (1 << 13) + +#define MSTPSR3 0xE6150048 +#define SMSTPCR3 0xE615013C + +#define SD2CKCR 0xE6150078 +#define SD2_97500KHZ 0x7 + +int board_early_init_f(void) +{ + /* TMU0 */ + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); + /* SCIFA0 */ + mstp_clrbits_le32(MSTPSR2, SMSTPCR2, SCIFA0_MSTP204); + /* ETHER */ + mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); + /* SDHI0,2 */ + mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SDHI0_MSTP314 | SDHI2_MSTP312); + + /* + * SD0 clock is set to 97.5MHz by default. + * Set SD2 to the 97.5MHz as well. + */ + writel(SD2_97500KHZ, SD2CKCR); + + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + /* Init PFC controller */ + r8a7790_pinmux_init(); + + cpld_init(); + +#ifdef CONFIG_SH_ETHER + /* ETHER Enable */ + gpio_request(GPIO_FN_ETH_CRS_DV, NULL); + gpio_request(GPIO_FN_ETH_RX_ER, NULL); + gpio_request(GPIO_FN_ETH_RXD0, NULL); + gpio_request(GPIO_FN_ETH_RXD1, NULL); + gpio_request(GPIO_FN_ETH_LINK, NULL); + gpio_request(GPIO_FN_ETH_REF_CLK, NULL); + gpio_request(GPIO_FN_ETH_MDIO, NULL); + gpio_request(GPIO_FN_ETH_TXD1, NULL); + gpio_request(GPIO_FN_ETH_TX_EN, NULL); + gpio_request(GPIO_FN_ETH_MAGIC, NULL); + gpio_request(GPIO_FN_ETH_TXD0, NULL); + gpio_request(GPIO_FN_ETH_MDC, NULL); + gpio_request(GPIO_FN_IRQ1, NULL); + + gpio_request(GPIO_GP_3_31, NULL); /* PHY_RST */ + gpio_direction_output(GPIO_GP_3_31, 0); + mdelay(20); + gpio_set_value(GPIO_GP_3_31, 1); + udelay(1); +#endif + + return 0; +} + +#define CXR24 0xEE7003C0 /* MAC address high register */ +#define CXR25 0xEE7003C8 /* MAC address low register */ +int board_eth_init(bd_t *bis) +{ + int ret = -ENODEV; + +#ifdef CONFIG_SH_ETHER + u32 val; + unsigned char enetaddr[6]; + + ret = sh_eth_initialize(bis); + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + return ret; + + /* Set Mac address */ + val = enetaddr[0] << 24 | enetaddr[1] << 16 | + enetaddr[2] << 8 | enetaddr[3]; + writel(val, CXR24); + + val = enetaddr[4] << 8 | enetaddr[5]; + writel(val, CXR25); +#endif + + return ret; +} + +/* Stout has KSZ8041NL/RNL */ +#define PHY_CONTROL1 0x1E +#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE_ACK 0x4000 +int board_phy_config(struct phy_device *phydev) +{ + int ret = phy_read(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1); + ret &= ~PHY_LED_MODE; + ret |= PHY_LED_MODE_ACK; + ret = phy_write(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1, (u16)ret); + + return 0; +} + +int board_mmc_init(bd_t *bis) +{ + int ret = -ENODEV; + +#ifdef CONFIG_SH_SDHI + gpio_request(GPIO_FN_SD0_DAT0, NULL); + gpio_request(GPIO_FN_SD0_DAT1, NULL); + gpio_request(GPIO_FN_SD0_DAT2, NULL); + gpio_request(GPIO_FN_SD0_DAT3, NULL); + gpio_request(GPIO_FN_SD0_CLK, NULL); + gpio_request(GPIO_FN_SD0_CMD, NULL); + gpio_request(GPIO_FN_SD0_CD, NULL); + gpio_request(GPIO_FN_SD2_DAT0, NULL); + gpio_request(GPIO_FN_SD2_DAT1, NULL); + gpio_request(GPIO_FN_SD2_DAT2, NULL); + gpio_request(GPIO_FN_SD2_DAT3, NULL); + gpio_request(GPIO_FN_SD2_CLK, NULL); + gpio_request(GPIO_FN_SD2_CMD, NULL); + gpio_request(GPIO_FN_SD2_CD, NULL); + + /* SDHI0 - needs CPLD mux setup */ + gpio_request(GPIO_GP_3_30, NULL); + gpio_direction_output(GPIO_GP_3_30, 1); /* VLDO3=3.3V */ + gpio_request(GPIO_GP_5_24, NULL); + gpio_direction_output(GPIO_GP_5_24, 1); /* power on */ + + ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0, + SH_SDHI_QUIRK_16BIT_BUF); + if (ret) + return ret; + + /* SDHI2 - needs CPLD mux setup */ + gpio_request(GPIO_GP_3_29, NULL); + gpio_direction_output(GPIO_GP_3_29, 1); /* VLDO4=3.3V */ + gpio_request(GPIO_GP_5_25, NULL); + gpio_direction_output(GPIO_GP_5_25, 1); /* power on */ + + ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 2, 0); +#endif + return ret; +} + + +int dram_init(void) +{ + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +const struct rmobile_sysinfo sysinfo = { + CONFIG_RMOBILE_BOARD_STRING +}; + +static const struct sh_serial_platdata serial_platdata = { + .base = SCIFA0_BASE, + .type = PORT_SCIFA, + .clk = CONFIG_MP_CLK_FREQ, +}; + +U_BOOT_DEVICE(stout_serials) = { + .name = "serial_sh", + .platdata = &serial_platdata, +}; diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c index f0d69d4a48..e0e2c48632 100644 --- a/board/samsung/common/misc.c +++ b/board/samsung/common/misc.c @@ -12,6 +12,7 @@ #include <errno.h> #include <version.h> #include <malloc.h> +#include <memalign.h> #include <linux/sizes.h> #include <asm/arch/cpu.h> #include <asm/gpio.h> diff --git a/board/scb9328/Kconfig b/board/scb9328/Kconfig deleted file mode 100644 index 68e99ea2e3..0000000000 --- a/board/scb9328/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SCB9328 - -config SYS_BOARD - default "scb9328" - -config SYS_SOC - default "imx" - -config SYS_CONFIG_NAME - default "scb9328" - -endif diff --git a/board/scb9328/MAINTAINERS b/board/scb9328/MAINTAINERS deleted file mode 100644 index 0917266afd..0000000000 --- a/board/scb9328/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SCB9328 BOARD -M: Torsten Koschorrek <koschorrek@synertronixx.de> -S: Maintained -F: board/scb9328/ -F: include/configs/scb9328.h -F: configs/scb9328_defconfig diff --git a/board/scb9328/Makefile b/board/scb9328/Makefile deleted file mode 100644 index 0b08f1a871..0000000000 --- a/board/scb9328/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := scb9328.o flash.o -obj-y += lowlevel_init.o diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c deleted file mode 100644 index 73bfa00eed..0000000000 --- a/board/scb9328/flash.c +++ /dev/null @@ -1,310 +0,0 @@ -/* - * Copyright (C) 2003 ETC s.r.o. - * - * This code was inspired by Marius Groeger and Kyle Harris code - * available in other board ports for U-Boot - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Written by Peter Figuli <peposh@etc.sk>, 2003. - */ - -#include <common.h> -#include "intel.h" - - -/* - * This code should handle CFI FLASH memory device. This code is very - * minimalistic approach without many essential error handling code as well. - * Because U-Boot actually is missing smart handling of FLASH device, - * we just set flash_id to anything else to FLASH_UNKNOW, so common code - * can call us without any restrictions. - * TODO: Add CFI Query, to be able to determine FLASH device. - * TODO: Add error handling code - * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but - * hopefully may work with other configurations. - */ - -#if ( SCB9328_FLASH_BUS_WIDTH == 1 ) -# define FLASH_BUS vu_char -# define FLASH_BUS_RET u_char -# if ( SCB9328_FLASH_INTERLEAVE == 1 ) -# define FLASH_CMD( x ) x -# else -# error "With 8bit bus only one chip is allowed" -# endif - - -#elif ( SCB9328_FLASH_BUS_WIDTH == 2 ) -# define FLASH_BUS vu_short -# define FLASH_BUS_RET u_short -# if ( SCB9328_FLASH_INTERLEAVE == 1 ) -# define FLASH_CMD( x ) x -# elif ( SCB9328_FLASH_INTERLEAVE == 2 ) -# define FLASH_CMD( x ) (( x << 8 )| x ) -# else -# error "With 16bit bus only 1 or 2 chip(s) are allowed" -# endif - - -#elif ( SCB9328_FLASH_BUS_WIDTH == 4 ) -# define FLASH_BUS vu_long -# define FLASH_BUS_RET u_long -# if ( SCB9328_FLASH_INTERLEAVE == 1 ) -# define FLASH_CMD( x ) x -# elif ( SCB9328_FLASH_INTERLEAVE == 2 ) -# define FLASH_CMD( x ) (( x << 16 )| x ) -# elif ( SCB9328_FLASH_INTERLEAVE == 4 ) -# define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x ) -# else -# error "With 32bit bus only 1,2 or 4 chip(s) are allowed" -# endif - -#else -# error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration" -#endif - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -static FLASH_BUS_RET flash_status_reg (void) -{ - - FLASH_BUS *addr = (FLASH_BUS *) 0; - - /* cppcheck-suppress nullPointer */ - *addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER); - - /* cppcheck-suppress nullPointer */ - return *addr; -} - -static int flash_ready (ulong timeout) -{ - int ok = 1; - ulong start; - - start = get_timer(0); - while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) != - FLASH_CMD (CFI_INTEL_SR_READY)) { - if (get_timer(start) > timeout && timeout != 0) { - ok = 0; - break; - } - } - return ok; -} - -#if ( CONFIG_SYS_MAX_FLASH_BANKS != 1 ) -# error "SCB9328 platform has only one flash bank!" -#endif - - -ulong flash_init (void) -{ - int i; - unsigned long address = SCB9328_FLASH_BASE; - - flash_info[0].size = SCB9328_FLASH_BANK_SIZE; - flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - flash_info[0].flash_id = INTEL_MANUFACT; - memset (flash_info[0].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_SECT; i++) { - flash_info[0].start[i] = address; -#ifdef SCB9328_FLASH_UNLOCK - /* Some devices are hw locked after start. */ - *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP); - *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK); - flash_ready (0); - *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY); -#endif - address += SCB9328_FLASH_SECT_SIZE; - } - - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return SCB9328_FLASH_BANK_SIZE; -} - -void flash_print_info (flash_info_t * info) -{ - int i; - - printf (" Intel vendor\n"); - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if (!(i % 5)) { - printf ("\n"); - } - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); -} - - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, non_protected = 0, sector; - int rc = ERR_OK; - - FLASH_BUS *address; - - for (sector = s_first; sector <= s_last; sector++) { - if (!info->protect[sector]) { - non_protected++; - } - } - - if (!non_protected) { - return ERR_PROTECTED; - } - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts (); - - - /* Start erase on unprotected sectors */ - for (sector = s_first; sector <= s_last && !ctrlc (); sector++) { - if (info->protect[sector]) { - printf ("Protected sector %2d skipping...\n", sector); - continue; - } else { - printf ("Erasing sector %2d ... ", sector); - } - - address = (FLASH_BUS *) (info->start[sector]); - - *address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE); - *address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM); - if (flash_ready (CONFIG_SYS_FLASH_ERASE_TOUT)) { - *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER); - printf ("ok.\n"); - } else { - *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND); - rc = ERR_TIMOUT; - printf ("timeout! Aborting...\n"); - break; - } - *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY); - } - if (ctrlc ()) - printf ("User Interrupt!\n"); - - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - if (flag) { - enable_interrupts (); - } - - return rc; -} - -static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data) -{ - FLASH_BUS *address = (FLASH_BUS *) dest; - int rc = ERR_OK; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*address & data) != data) { - return ERR_NOT_ERASED; - } - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - flag = disable_interrupts (); - - *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER); - *address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1); - *address = data; - - if (!flash_ready (CONFIG_SYS_FLASH_WRITE_TOUT)) { - *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND); - rc = ERR_TIMOUT; - printf ("timeout! Aborting...\n"); - } - - *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY); - if (flag) { - enable_interrupts (); - } - - return rc; -} - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong read_addr, write_addr; - FLASH_BUS data; - int i, result = ERR_OK; - - - read_addr = addr & ~(sizeof (FLASH_BUS) - 1); - write_addr = read_addr; - if (read_addr != addr) { - data = 0; - for (i = 0; i < sizeof (FLASH_BUS); i++) { - if (read_addr < addr || cnt == 0) { - data |= *((uchar *) read_addr) << i * 8; - } else { - data |= (*src++) << i * 8; - cnt--; - } - read_addr++; - } - if ((result = write_data (info, write_addr, data)) != ERR_OK) { - return result; - } - write_addr += sizeof (FLASH_BUS); - } - for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) { - if ((result = write_data (info, write_addr, - *((FLASH_BUS *) src))) != ERR_OK) { - return result; - } - write_addr += sizeof (FLASH_BUS); - src += sizeof (FLASH_BUS); - } - if (cnt > 0) { - read_addr = write_addr; - data = 0; - for (i = 0; i < sizeof (FLASH_BUS); i++) { - if (cnt > 0) { - data |= (*src++) << i * 8; - cnt--; - } else { - data |= *((uchar *) read_addr) << i * 8; - } - read_addr++; - } - if ((result = write_data (info, write_addr, data)) != 0) { - return result; - } - } - return ERR_OK; -} diff --git a/board/scb9328/intel.h b/board/scb9328/intel.h deleted file mode 100644 index 5596d27133..0000000000 --- a/board/scb9328/intel.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (C) 2002 ETC s.r.o. - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - * - * Written by Marcel Telka <marcel@telka.sk>, 2002. - * - * Documentation: - * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A, - * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011 - * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18, - * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005 - * - * This file is taken from OpenWinCE project hosted by SourceForge.net - * - */ - -#ifndef FLASH_INTEL_H -#define FLASH_INTEL_H - -#include <common.h> - -/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */ - -#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */ - -/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */ - -#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */ - -/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */ - -#define CFI_CHIP_INTEL_28F320J3A 0x0016 -#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A" -#define CFI_CHIP_INTEL_28F640J3A 0x0017 -#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A" -#define CFI_CHIP_INTEL_28F128J3A 0x0018 -#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A" - -/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */ - -#define CFI_CHIP_INTEL_28F640K3 0x8801 -#define CFI_CHIPN_INTEL_28F640K3 "28F640K3" -#define CFI_CHIP_INTEL_28F128K3 0x8802 -#define CFI_CHIPN_INTEL_28F128K3 "28F128K3" -#define CFI_CHIP_INTEL_28F256K3 0x8803 -#define CFI_CHIPN_INTEL_28F256K3 "28F256K3" -#define CFI_CHIP_INTEL_28F640K18 0x8805 -#define CFI_CHIPN_INTEL_28F640K18 "28F640K18" -#define CFI_CHIP_INTEL_28F128K18 0x8806 -#define CFI_CHIPN_INTEL_28F128K18 "28F128K18" -#define CFI_CHIP_INTEL_28F256K18 0x8807 -#define CFI_CHIPN_INTEL_28F256K18 "28F256K18" - -#endif /* FLASH_INTEL_H */ diff --git a/board/scb9328/lowlevel_init.S b/board/scb9328/lowlevel_init.S deleted file mode 100644 index d5727248db..0000000000 --- a/board/scb9328/lowlevel_init.S +++ /dev/null @@ -1,188 +0,0 @@ -/* - * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <asm/arch/imx-regs.h> - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - -/* Change PERCLK1DIV to 14 ie 14+1 */ - ldr r0, =PCDR - ldr r1, =CONFIG_SYS_PCDR_VAL - str r1, [r0] - -/* set MCU PLL Control Register 0 */ - - ldr r0, =MPCTL0 - ldr r1, =CONFIG_SYS_MPCTL0_VAL - str r1, [r0] - -/* set mpll restart bit */ - ldr r0, =CSCR - ldr r1, [r0] - orr r1,r1,#(1<<21) - str r1, [r0] - - mov r2,#0x10 -1: - mov r3,#0x2000 -2: - subs r3,r3,#1 - bne 2b - - subs r2,r2,#1 - bne 1b - -/* set System PLL Control Register 0 */ - - ldr r0, =SPCTL0 - ldr r1, =CONFIG_SYS_SPCTL0_VAL - str r1, [r0] - -/* set spll restart bit */ - ldr r0, =CSCR - ldr r1, [r0] - orr r1,r1,#(1<<22) - str r1, [r0] - - mov r2,#0x10 -1: - mov r3,#0x2000 -2: - subs r3,r3,#1 - bne 2b - - subs r2,r2,#1 - bne 1b - - ldr r0, =CSCR - ldr r1, =CONFIG_SYS_CSCR_VAL - str r1, [r0] - -/* I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon - *this..... - * - * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15 - * register 1, this stops it using the output of the PLL and thus runs at the - * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never - * use the value set in the CM_OSC registers...regardless of what you set it - * too! Thus, although i thought i was running at 140MHz, i'm actually running - * at 40!.. - - * Slapping this into my bootloader does the trick... - - * MRC p15,0,r0,c1,c0,0 ; read core configuration register - * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode - * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration - * register - */ - MRC p15,0,r0,c1,c0,0 - ORR r0,r0,#0xC0000000 - MCR p15,0,r0,c1,c0,0 - - ldr r0, =GPR(0) - ldr r1, =CONFIG_SYS_GPR_A_VAL - str r1, [r0] - - ldr r0, =GIUS(0) - ldr r1, =CONFIG_SYS_GIUS_A_VAL - str r1, [r0] - -/* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */ - - ldr r0, =FMCR - ldr r1, =CONFIG_SYS_FMCR_VAL - str r1, [r0] - - ldr r0, =CS0U - ldr r1, =CONFIG_SYS_CS0U_VAL - str r1, [r0] - - ldr r0, =CS0L - ldr r1, =CONFIG_SYS_CS0L_VAL - str r1, [r0] - - ldr r0, =CS1U - ldr r1, =CONFIG_SYS_CS1U_VAL - str r1, [r0] - - ldr r0, =CS1L - ldr r1, =CONFIG_SYS_CS1L_VAL - str r1, [r0] - - ldr r0, =CS2U - ldr r1, =CONFIG_SYS_CS2U_VAL - str r1, [r0] - - ldr r0, =CS2L - ldr r1, =CONFIG_SYS_CS2L_VAL - str r1, [r0] - - ldr r0, =CS3U - ldr r1, =CONFIG_SYS_CS3U_VAL - str r1, [r0] - - ldr r0, =CS3L - ldr r1, =CONFIG_SYS_CS3L_VAL - str r1, [r0] - - ldr r0, =CS4U - ldr r1, =CONFIG_SYS_CS4U_VAL - str r1, [r0] - - ldr r0, =CS4L - ldr r1, =CONFIG_SYS_CS4L_VAL - str r1, [r0] - - ldr r0, =CS5U - ldr r1, =CONFIG_SYS_CS5U_VAL - str r1, [r0] - - ldr r0, =CS5L - ldr r1, =CONFIG_SYS_CS5L_VAL - str r1, [r0] - -/* SDRAM Setup */ - - ldr r0, =SDCTL0 - ldr r1, =PRECHARGE_CMD - str r1, [r0] - - ldr r0, =0x08200000 - ldr r1, =0x0 /* Issue Precharge all Command */ - str r1, [r0] - - ldr r0, =SDCTL0 - ldr r1, =AUTOREFRESH_CMD - str r1, [r0] - - ldr r0, =0x08000000 - ldr r1, =0x0 /* Issue AutoRefresh Command */ - str r1, [r0] - str r1, [r0] - str r1, [r0] - str r1, [r0] - str r1, [r0] - str r1, [r0] - str r1, [r0] - str r1, [r0] - - ldr r0, =SDCTL0 - ldr r1, =0xb10a8300 - str r1, [r0] - - ldr r0, =0x08223000 /* CAS Latency 2 */ - ldr r1, =0x0 /* Issue Mode Register Command, Burst Length = 8 */ - str r1, [r0] - - ldr r0, =SDCTL0 - ldr r1, =0x810a8200 /* Set to Normal Mode CAS 2 */ - str r1, [r0] - - mov pc,r10 diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c deleted file mode 100644 index 3463f52693..0000000000 --- a/board/scb9328/scb9328.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_init (void) -{ - gd->bd->bi_arch_number = MACH_TYPE_SCB9328; - gd->bd->bi_boot_params = 0x08000100; - - return 0; -} - -int dram_init (void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)SCB9328_SDRAM_1, - SCB9328_SDRAM_1_SIZE); - - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = SCB9328_SDRAM_1; - gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE; -} - -/** - * show_boot_progress: - indicate state of the boot process - * - * @param status: Status number - see README for details. - * - * The CSB226 does only have 3 LEDs, so we switch them on at the most - * important states (1, 5, 15). - */ - -void show_boot_progress (int status) -{ - return; -} - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index 2d424882a9..d82f1b73a7 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -90,7 +90,8 @@ static void smartweb_macb_hw_init(void) pin_to_mask(AT91_PIN_PA17) | pin_to_mask(AT91_PIN_PA25) | pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), + pin_to_mask(AT91_PIN_PA28) | + pin_to_mask(AT91_PIN_PA29), &pioa->pudr); at91_phy_reset(); @@ -101,7 +102,8 @@ static void smartweb_macb_hw_init(void) pin_to_mask(AT91_PIN_PA17) | pin_to_mask(AT91_PIN_PA25) | pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), + pin_to_mask(AT91_PIN_PA28) | + pin_to_mask(AT91_PIN_PA29), &pioa->puer); /* Initialize EMAC=MACB hardware */ @@ -141,13 +143,6 @@ int board_early_init_f(void) int board_init(void) { - /* Adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - smartweb_nand_hw_init(); -#ifdef CONFIG_MACB - smartweb_macb_hw_init(); -#endif /* power LED red */ at91_set_gpio_output(AT91_PIN_PC6, 0); at91_set_gpio_output(AT91_PIN_PC7, 1); @@ -163,6 +158,13 @@ int board_init(void) at91_udc_probe(&board_udc_data); #endif + /* Adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + smartweb_nand_hw_init(); +#ifdef CONFIG_MACB + smartweb_macb_hw_init(); +#endif return 0; } @@ -197,6 +199,7 @@ void matrix_init(void) void spl_board_init(void) { + /* power LED orange */ at91_set_gpio_output(AT91_PIN_PC6, 1); at91_set_gpio_output(AT91_PIN_PC7, 1); /* alarm LED orange */ @@ -212,8 +215,8 @@ void spl_board_init(void) /* check if both button are pressed */ if (at91_get_gpio_value(AT91_PIN_PA28) == 0 && - at91_get_gpio_value(AT91_PIN_PA29) == 0) { - debug("Recovery button pressed\n"); + at91_get_gpio_value(AT91_PIN_PA29) == 0) { + smartweb_nand_hw_init(); nand_init(); spl_nand_erase_one(0, 0); } diff --git a/board/solidrun/mx6cuboxi/Kconfig b/board/solidrun/mx6cuboxi/Kconfig index 31d88b2dd4..741c1754f8 100644 --- a/board/solidrun/mx6cuboxi/Kconfig +++ b/board/solidrun/mx6cuboxi/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "solidrun" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "mx6cuboxi" diff --git a/board/st-ericsson/snowball/Kconfig b/board/st-ericsson/snowball/Kconfig deleted file mode 100644 index 0b3a0cca6c..0000000000 --- a/board/st-ericsson/snowball/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_SNOWBALL - -config SYS_BOARD - default "snowball" - -config SYS_VENDOR - default "st-ericsson" - -config SYS_SOC - default "u8500" - -config SYS_CONFIG_NAME - default "snowball" - -endif diff --git a/board/st-ericsson/snowball/MAINTAINERS b/board/st-ericsson/snowball/MAINTAINERS deleted file mode 100644 index 132fc524ba..0000000000 --- a/board/st-ericsson/snowball/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SNOWBALL BOARD -M: Mathieu Poirier <mathieu.poirier@linaro.org> -S: Maintained -F: board/st-ericsson/snowball/ -F: include/configs/snowball.h -F: configs/snowball_defconfig diff --git a/board/st-ericsson/snowball/Makefile b/board/st-ericsson/snowball/Makefile deleted file mode 100644 index f0605e2bcd..0000000000 --- a/board/st-ericsson/snowball/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) ST-Ericsson SA 2009 -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ccflags-y += -D__RELEASE -D__STN_8500 - -obj-y := snowball.o diff --git a/board/st-ericsson/snowball/db8500_pins.h b/board/st-ericsson/snowball/db8500_pins.h deleted file mode 100644 index e339cb86e2..0000000000 --- a/board/st-ericsson/snowball/db8500_pins.h +++ /dev/null @@ -1,745 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. - * The purpose is that GPIO config found in kernel should work by simply - * copy-paste it to U-boot. - * - * Ported to U-boot by: - * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> - ** - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - */ - -#ifndef __DB8500_PINS_H -#define __DB8500_PINS_H - -#include <asm/arch/db8500_pincfg.h> - -#define GPIO0_GPIO PIN_CFG(0, GPIO) -#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A) -#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B) -#define GPIO0_IP_TDO PIN_CFG(0, ALT_C) - -#define GPIO1_GPIO PIN_CFG(1, GPIO) -#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A) -#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B) -#define GPIO1_IP_TDI PIN_CFG(1, ALT_C) - -#define GPIO2_GPIO PIN_CFG(2, GPIO) -#define GPIO2_U0_RXD PIN_CFG(2, ALT_A) -#define GPIO2_NONE PIN_CFG(2, ALT_B) -#define GPIO2_IP_TMS PIN_CFG(2, ALT_C) - -#define GPIO3_GPIO PIN_CFG(3, GPIO) -#define GPIO3_U0_TXD PIN_CFG(3, ALT_A) -#define GPIO3_NONE PIN_CFG(3, ALT_B) -#define GPIO3_IP_TCK PIN_CFG(3, ALT_C) - -#define GPIO4_GPIO PIN_CFG(4, GPIO) -#define GPIO4_U1_RXD PIN_CFG(4, ALT_A) -#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP) -#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) - -#define GPIO5_GPIO PIN_CFG(5, GPIO) -#define GPIO5_U1_TXD PIN_CFG(5, ALT_A) -#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP) -#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) - -#define GPIO6_GPIO PIN_CFG(6, GPIO) -#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) -#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP) -#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) - -#define GPIO7_GPIO PIN_CFG(7, GPIO) -#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) -#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP) -#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) - -#define GPIO8_GPIO PIN_CFG(8, GPIO) -#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP) -#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP) - -#define GPIO9_GPIO PIN_CFG(9, GPIO) -#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP) -#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP) - -#define GPIO10_GPIO PIN_CFG(10, GPIO) -#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP) -#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP) -#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) - -#define GPIO11_GPIO PIN_CFG(11, GPIO) -#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP) -#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP) -#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) - -#define GPIO12_GPIO PIN_CFG(12, GPIO) -#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A) -#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B) - -#define GPIO13_GPIO PIN_CFG(13, GPIO) -#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A) - -#define GPIO14_GPIO PIN_CFG(14, GPIO) -#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A) - -#define GPIO15_GPIO PIN_CFG(15, GPIO) -#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A) -#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B) - -#define GPIO16_GPIO PIN_CFG(16, GPIO) -#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) -#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP) -#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) - -#define GPIO17_GPIO PIN_CFG(17, GPIO) -#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) -#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP) -#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) - -#define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A) -#define GPIO18_U2_RXD PIN_CFG(18, ALT_B) -#define GPIO18_MS_IEP PIN_CFG(18, ALT_C) - -#define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A) -#define GPIO19_U2_TXD PIN_CFG(19, ALT_B) -#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) - -#define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A) -#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) -#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) - -#define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A) -#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) -#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) - -#define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A) -#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) -#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) - -#define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A) -#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) -#define GPIO23_MS_CLK PIN_CFG(23, ALT_C) - -#define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A) -#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) -#define GPIO24_MS_BS PIN_CFG(24, ALT_C) - -#define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A) -#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) -#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) - -#define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A) -#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) -#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) - -#define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A) -#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) -#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) - -#define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A) -#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) -#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) - -#define GPIO29_GPIO PIN_CFG(29, GPIO) -#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A) -#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B) -#define GPIO29_U2_RXD PIN_CFG(29, ALT_C) - -#define GPIO30_GPIO PIN_CFG(30, GPIO) -#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) -#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B) -#define GPIO30_U2_TXD PIN_CFG(30, ALT_C) - -#define GPIO31_GPIO PIN_CFG(31, GPIO) -#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A) -#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B) -#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C) - -#define GPIO32_GPIO PIN_CFG(32, GPIO) -#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A) -#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B) -#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C) - -#define GPIO33_GPIO PIN_CFG(33, GPIO) -#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A) -#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B) -#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C) - -#define GPIO34_GPIO PIN_CFG(34, GPIO) -#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A) -#define GPIO34_NONE PIN_CFG(34, ALT_B) -#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C) - -#define GPIO35_GPIO PIN_CFG(35, GPIO) -#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A) -#define GPIO35_NONE PIN_CFG(35, ALT_B) -#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C) - -#define GPIO36_GPIO PIN_CFG(36, GPIO) -#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A) -#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B) -#define GPIO36_U0_RIn PIN_CFG(36, ALT_C) - -#define GPIO64_GPIO PIN_CFG(64, GPIO) -#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A) -#define GPIO64_KP_O1 PIN_CFG(64, ALT_B) -#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C) - -#define GPIO65_GPIO PIN_CFG(65, GPIO) -#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A) -#define GPIO65_KP_O0 PIN_CFG(65, ALT_B) -#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C) - -#define GPIO66_GPIO PIN_CFG(66, GPIO) -#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A) -#define GPIO66_KP_I1 PIN_CFG(66, ALT_B) -#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C) - -#define GPIO67_GPIO PIN_CFG(67, GPIO) -#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A) -#define GPIO67_KP_I0 PIN_CFG(67, ALT_B) -#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C) - -#define GPIO68_GPIO PIN_CFG(68, GPIO) -#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A) -#define GPIO68_KP_O7 PIN_CFG(68, ALT_B) -#define GPIO68_SM_CLE PIN_CFG(68, ALT_C) - -#define GPIO69_GPIO PIN_CFG(69, GPIO) -#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A) -#define GPIO69_KP_I7 PIN_CFG(69, ALT_B) -#define GPIO69_SM_ALE PIN_CFG(69, ALT_C) - -#define GPIO70_GPIO PIN_CFG(70, GPIO) -#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A) -#define GPIO70_KP_O5 PIN_CFG(70, ALT_B) -#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C) - -#define GPIO71_GPIO PIN_CFG(71, GPIO) -#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A) -#define GPIO71_KP_O4 PIN_CFG(71, ALT_B) -#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C) - -#define GPIO72_GPIO PIN_CFG(72, GPIO) -#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A) -#define GPIO72_KP_O3 PIN_CFG(72, ALT_B) -#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C) - -#define GPIO73_GPIO PIN_CFG(73, GPIO) -#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A) -#define GPIO73_KP_O2 PIN_CFG(73, ALT_B) -#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C) - -#define GPIO74_GPIO PIN_CFG(74, GPIO) -#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A) -#define GPIO74_KP_I5 PIN_CFG(74, ALT_B) -#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C) - -#define GPIO75_GPIO PIN_CFG(75, GPIO) -#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A) -#define GPIO75_KP_I4 PIN_CFG(75, ALT_B) -#define GPIO75_U2_RXD PIN_CFG(75, ALT_C) - -#define GPIO76_GPIO PIN_CFG(76, GPIO) -#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A) -#define GPIO76_KP_I3 PIN_CFG(76, ALT_B) -#define GPIO76_U2_TXD PIN_CFG(76, ALT_C) - -#define GPIO77_GPIO PIN_CFG(77, GPIO) -#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A) -#define GPIO77_KP_I2 PIN_CFG(77, ALT_B) -#define GPIO77_NONE PIN_CFG(77, ALT_C) - -#define GPIO78_GPIO PIN_CFG(78, GPIO) -#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A) -#define GPIO78_KP_O6 PIN_CFG(78, ALT_B) -#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C) - -#define GPIO79_GPIO PIN_CFG(79, GPIO) -#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A) -#define GPIO79_KP_I6 PIN_CFG(79, ALT_B) -#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C) - -#define GPIO80_GPIO PIN_CFG(80, GPIO) -#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A) -#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B) -#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C) - -#define GPIO81_GPIO PIN_CFG(81, GPIO) -#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A) -#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B) -#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C) - -#define GPIO82_GPIO PIN_CFG(82, GPIO) -#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A) -#define GPIO82_KP_O5 PIN_CFG(82, ALT_B) - -#define GPIO83_GPIO PIN_CFG(83, GPIO) -#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A) -#define GPIO83_KP_O4 PIN_CFG(83, ALT_B) - -#define GPIO84_GPIO PIN_CFG_PULL(84, GPIO, UP) -#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A) -#define GPIO84_KP_I5 PIN_CFG(84, ALT_B) - -#define GPIO85_GPIO PIN_CFG(85, GPIO) -#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A) -#define GPIO85_KP_I4 PIN_CFG(85, ALT_B) - -#define GPIO86_GPIO PIN_CFG(86, GPIO) -#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A) -#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B) -#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C) - -#define GPIO87_GPIO PIN_CFG(87, GPIO) -#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A) -#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B) -#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C) - -#define GPIO88_GPIO PIN_CFG(88, GPIO) -#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A) -#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B) -#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C) - -#define GPIO89_GPIO PIN_CFG(89, GPIO) -#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A) -#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B) -#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C) - -#define GPIO90_GPIO PIN_CFG(90, GPIO) -#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A) -#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B) -#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C) - -#define GPIO91_GPIO PIN_CFG(91, GPIO) -#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A) -#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B) -#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C) - -#define GPIO92_GPIO PIN_CFG(92, GPIO) -#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A) -#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B) -#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C) - -#define GPIO93_GPIO PIN_CFG(93, GPIO) -#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A) -#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B) -#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C) - -#define GPIO94_GPIO PIN_CFG(94, GPIO) -#define GPIO94_KP_O7 PIN_CFG(94, ALT_A) -#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B) -#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C) - -#define GPIO95_GPIO PIN_CFG(95, GPIO) -#define GPIO95_KP_I7 PIN_CFG(95, ALT_A) -#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B) -#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C) - -#define GPIO96_GPIO PIN_CFG(96, GPIO) -#define GPIO96_KP_O6 PIN_CFG(96, ALT_A) -#define GPIO96_SM_OEn PIN_CFG(96, ALT_B) -#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C) - -#define GPIO97_GPIO PIN_CFG(97, GPIO) -#define GPIO97_KP_I6 PIN_CFG(97, ALT_A) -#define GPIO97_SM_WEn PIN_CFG(97, ALT_B) -#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) - -#define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A) -#define GPIO128_SM_CKO PIN_CFG(128, ALT_B) - -#define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A) -#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) - -#define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A) -#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) -#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) - -#define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A) -#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) - -#define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A) -#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) - -#define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A) -#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) - -#define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A) -#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) - -#define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A) -#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) - -#define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A) -#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) - -#define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A) -#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) - -#define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A) -#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) - -#define GPIO139_GPIO PIN_CFG(139, GPIO) -#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A) -#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B) -#define GPIO139_KP_O8 PIN_CFG(139, ALT_C) - -#define GPIO140_GPIO PIN_CFG(140, GPIO) -#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A) -#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B) -#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C) - -#define GPIO141_GPIO PIN_CFG(141, GPIO) -#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A) -#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B) -#define GPIO141_KP_O9 PIN_CFG(141, ALT_C) - -#define GPIO142_GPIO PIN_CFG(142, GPIO) -#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A) -#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B) -#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C) - -#define GPIO143_GPIO PIN_CFG(143, GPIO) -#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A) - -#define GPIO144_GPIO PIN_CFG(144, GPIO) -#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A) - -#define GPIO145_GPIO PIN_CFG(145, GPIO) -#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A) - -#define GPIO146_GPIO PIN_CFG(146, GPIO) -#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) - -#define GPIO147_GPIO PIN_CFG(147, GPIO) -#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP) - -#define GPIO148_GPIO PIN_CFG(148, GPIO) -#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP) - -#define GPIO149_GPIO PIN_CFG(149, GPIO) -#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) -#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B) -#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C) - -#define GPIO150_GPIO PIN_CFG(150, GPIO) -#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A) -#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B) - -#define GPIO151_GPIO PIN_CFG(151, GPIO) -#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A) -#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B) -#define GPIO151_KP_O8 PIN_CFG(151, ALT_C) - -#define GPIO152_GPIO PIN_CFG(152, GPIO) -#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A) -#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B) -#define GPIO152_KP_O9 PIN_CFG(152, ALT_C) - -#define GPIO153_GPIO PIN_CFG(153, GPIO) -#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN) -#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) -#define GPIO153_U2_RXD PIN_CFG(153, ALT_C) - -#define GPIO154_GPIO PIN_CFG(154, GPIO) -#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN) -#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) -#define GPIO154_U2_TXD PIN_CFG(154, ALT_C) - -#define GPIO155_GPIO PIN_CFG(155, GPIO) -#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN) -#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) -#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) - -#define GPIO156_GPIO PIN_CFG(156, GPIO) -#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN) -#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) -#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) - -#define GPIO157_GPIO PIN_CFG(157, GPIO) -#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP) -#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) -#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) - -#define GPIO158_GPIO PIN_CFG(158, GPIO) -#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP) -#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) -#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) - -#define GPIO159_GPIO PIN_CFG(159, GPIO) -#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP) -#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) -#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) - -#define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP) -#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) -#define GPIO160_NONE PIN_CFG(160, ALT_C) - -#define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN) -#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) -#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) - -#define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN) -#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) -#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) - -#define GPIO163_GPIO PIN_CFG(163, GPIO) -#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN) -#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) -#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) - -#define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP) -#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) -#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) - -#define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP) -#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) -#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) - -#define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP) -#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) -#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) - -#define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP) -#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) -#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) - -#define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP) -#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) -#define GPIO168_NONE PIN_CFG(168, ALT_C) - -#define GPIO169_GPIO PIN_CFG(169, GPIO) -#define GPIO169_RF_PURn PIN_CFG(169, ALT_A) -#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B) -#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C) - -#define GPIO170_GPIO PIN_CFG(170, GPIO) -#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A) -#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B) -#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C) - -#define GPIO171_GPIO PIN_CFG(171, GPIO) -#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A) -#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B) -#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C) - -#define GPIO192_GPIO PIN_CFG(192, GPIO) -#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A) - -#define GPIO193_GPIO PIN_CFG(193, GPIO) -#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A) - -#define GPIO194_GPIO PIN_CFG(194, GPIO) -#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A) - -#define GPIO195_GPIO PIN_CFG(195, GPIO) -#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A) - -#define GPIO196_GPIO PIN_CFG(196, GPIO) -#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) - -#define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A) - -#define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A) - -#define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A) - -#define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A) - -#define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A) - -#define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A) -#define GPIO202_PWL PIN_CFG(202, ALT_B) -#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) - -#define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A) - -#define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A) - -#define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A) - -#define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A) - -#define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A) - -#define GPIO208_GPIO PIN_CFG(208, GPIO) -#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) - -#define GPIO209_GPIO PIN_CFG(209, GPIO) -#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A) -#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B) - -#define GPIO210_GPIO PIN_CFG(210, GPIO) -#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A) - -#define GPIO211_GPIO PIN_CFG(211, GPIO) -#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A) - -#define GPIO212_GPIO PIN_CFG(212, GPIO) -#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A) -#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B) - -#define GPIO213_GPIO PIN_CFG(213, GPIO) -#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A) -#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B) - -#define GPIO214_GPIO PIN_CFG(214, GPIO) -#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A) -#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B) - -#define GPIO215_GPIO PIN_CFG(215, GPIO) -#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A) -#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B) -#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C) - -#define GPIO216_GPIO PIN_CFG(216, GPIO) -#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) -#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) -#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP) - -#define GPIO217_GPIO PIN_CFG(217, GPIO) -#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A) -#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B) -#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C) - -#define GPIO218_GPIO PIN_CFG(218, GPIO) -#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) -#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) -#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP) - -#define GPIO219_GPIO PIN_CFG(219, GPIO) -#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A) -#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B) - -#define GPIO220_GPIO PIN_CFG(220, GPIO) -#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A) -#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B) -#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C) - -#define GPIO221_GPIO PIN_CFG(221, GPIO) -#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A) -#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B) - -#define GPIO222_GPIO PIN_CFG(222, GPIO) -#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A) -#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B) - -#define GPIO223_GPIO PIN_CFG(223, GPIO) -#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A) -#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B) -#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C) - -#define GPIO224_GPIO PIN_CFG(224, GPIO) -#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A) -#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B) -#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C) - -#define GPIO225_GPIO PIN_CFG(225, GPIO) -#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A) -#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B) -#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C) - -#define GPIO226_GPIO PIN_CFG(226, GPIO) -#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A) -#define GPIO226_PWL PIN_CFG(226, ALT_B) -#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C) - -#define GPIO227_GPIO PIN_CFG(227, GPIO) -#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A) - -#define GPIO228_GPIO PIN_CFG(228, GPIO) -#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A) - -#define GPIO229_GPIO PIN_CFG(229, GPIO) -#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) -#define GPIO229_PWL PIN_CFG(229, ALT_B) -#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP) - -#define GPIO230_GPIO PIN_CFG(230, GPIO) -#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) -#define GPIO230_PWL PIN_CFG(230, ALT_B) -#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP) - -#define GPIO256_GPIO PIN_CFG(256, GPIO) -#define GPIO256_USB_NXT PIN_CFG(256, ALT_A) - -#define GPIO257_GPIO PIN_CFG(257, GPIO) -#define GPIO257_USB_STP PIN_CFG(257, ALT_A) - -#define GPIO258_GPIO PIN_CFG(258, GPIO) -#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A) -#define GPIO258_NONE PIN_CFG(258, ALT_B) -#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C) - -#define GPIO259_GPIO PIN_CFG(259, GPIO) -#define GPIO259_USB_DIR PIN_CFG(259, ALT_A) - -#define GPIO260_GPIO PIN_CFG(260, GPIO) -#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A) - -#define GPIO261_GPIO PIN_CFG(261, GPIO) -#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A) - -#define GPIO262_GPIO PIN_CFG(262, GPIO) -#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A) - -#define GPIO263_GPIO PIN_CFG(263, GPIO) -#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A) - -#define GPIO264_GPIO PIN_CFG(264, GPIO) -#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A) - -#define GPIO265_GPIO PIN_CFG(265, GPIO) -#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A) - -#define GPIO266_GPIO PIN_CFG(266, GPIO) -#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A) - -#define GPIO267_GPIO PIN_CFG(267, GPIO) -#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A) - -#endif diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c deleted file mode 100644 index c3061e20d9..0000000000 --- a/board/st-ericsson/snowball/snowball.c +++ /dev/null @@ -1,340 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <malloc.h> -#include <i2c.h> -#include <mmc.h> -#include <asm/types.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/arch/db8500_pincfg.h> -#include <asm/arch/prcmu.h> -#include <asm/arch/hardware.h> -#include <asm/arch/sys_proto.h> - -#ifdef CONFIG_MMC -#include "../../../drivers/mmc/arm_pl180_mmci.h" -#endif -#include "db8500_pins.h" - -/* - * Get a global data pointer - */ -DECLARE_GLOBAL_DATA_PTR; - -/* - * Memory controller register - */ -#define DMC_BASE_ADDR 0x80156000 -#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184) - -/* - * GPIO pin config common for MOP500/HREF boards - */ -unsigned long gpio_cfg_common[] = { - /* I2C */ - GPIO147_I2C0_SCL, - GPIO148_I2C0_SDA, - GPIO16_I2C1_SCL, - GPIO17_I2C1_SDA, - GPIO10_I2C2_SDA, - GPIO11_I2C2_SCL, - GPIO229_I2C3_SDA, - GPIO230_I2C3_SCL, - - /* SSP0, to AB8500 */ - GPIO143_SSP0_CLK, - GPIO144_SSP0_FRM, - GPIO145_SSP0_RXD | PIN_PULL_DOWN, - GPIO146_SSP0_TXD, - - /* MMC0 (MicroSD card) */ - GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH, - GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH, - GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH, - GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, - GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL, - GPIO23_MC0_CLK | PIN_OUTPUT_LOW, - GPIO24_MC0_CMD | PIN_INPUT_PULLUP, - GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP, - GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP, - GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP, - GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP, - - /* MMC4 (On-board eMMC) */ - GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP, - GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP, - GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP, - GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP, - GPIO201_MC4_CMD | PIN_INPUT_PULLUP, - GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL, - GPIO203_MC4_CLK | PIN_OUTPUT_LOW, - GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP, - GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP, - GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP, - GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP, - - /* UART2, console */ - GPIO29_U2_RXD | PIN_INPUT_PULLUP, - GPIO30_U2_TXD | PIN_OUTPUT_HIGH, - GPIO31_U2_CTSn | PIN_INPUT_PULLUP, - GPIO32_U2_RTSn | PIN_OUTPUT_HIGH, - - /* - * USB, pin 256-267 USB, Is probably already setup correctly from - * BootROM/boot stages, but we don't trust that and set it up anyway - */ - GPIO256_USB_NXT, - GPIO257_USB_STP, - GPIO258_USB_XCLK, - GPIO259_USB_DIR, - GPIO260_USB_DAT7, - GPIO261_USB_DAT6, - GPIO262_USB_DAT5, - GPIO263_USB_DAT4, - GPIO264_USB_DAT3, - GPIO265_USB_DAT2, - GPIO266_USB_DAT1, - GPIO267_USB_DAT0, -}; - -unsigned long gpio_cfg_snowball[] = { - /* MMC0 (MicroSD card) */ - GPIO217_GPIO | PIN_OUTPUT_HIGH, /* MMC_EN */ - GPIO218_GPIO | PIN_INPUT_NOPULL, /* MMC_CD */ - GPIO228_GPIO | PIN_OUTPUT_HIGH, /* SD_SEL */ - - /* eMMC */ - GPIO167_GPIO | PIN_OUTPUT_HIGH, /* RSTn_MLC */ - - /* LAN */ - GPIO131_SM_ADQ8, - GPIO132_SM_ADQ9, - GPIO133_SM_ADQ10, - GPIO134_SM_ADQ11, - GPIO135_SM_ADQ12, - GPIO136_SM_ADQ13, - GPIO137_SM_ADQ14, - GPIO138_SM_ADQ15, - - /* RSTn_LAN */ - GPIO141_GPIO | PIN_OUTPUT_HIGH, -}; - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init(void) -{ - /* - * Setup board (bd) and board-info (bi). - * bi_arch_number: Unique id for this board. It will passed in r1 to - * Linux startup code and is the machine_id. - * bi_boot_params: Where this board expects params. - */ - gd->bd->bi_arch_number = MACH_TYPE_SNOWBALL; - gd->bd->bi_boot_params = 0x00000100; - - /* Configure GPIO pins needed by U-boot */ - db8500_gpio_config_pins(gpio_cfg_common, ARRAY_SIZE(gpio_cfg_common)); - - db8500_gpio_config_pins(gpio_cfg_snowball, - ARRAY_SIZE(gpio_cfg_snowball)); - - return 0; -} - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->ram_size = gd->bd->bi_dram[0].size = - get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE); - - return 0; -} - -static int raise_ab8500_gpio16(void) -{ - int ret; - - /* selection */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_SEL2_REG); - if (ret < 0) - goto out; - - ret |= 0x80; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_SEL2_REG, ret); - if (ret < 0) - goto out; - - /* direction */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR2_REG); - if (ret < 0) - goto out; - - ret |= 0x80; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR2_REG, ret); - if (ret < 0) - goto out; - - /* out */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT2_REG); - if (ret < 0) - goto out; - - ret |= 0x80; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT2_REG, ret); - -out: - return ret; -} - -static int raise_ab8500_gpio26(void) -{ - int ret; - - /* selection */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR4_REG); - if (ret < 0) - goto out; - - ret |= 0x2; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR4_REG, ret); - if (ret < 0) - goto out; - - /* out */ - ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT4_REG); - if (ret < 0) - goto out; - - ret |= 0x2; - ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT4_REG, ret); - -out: - return ret; -} - -int board_late_init(void) -{ - /* enable 3V3 for LAN controller */ - if (raise_ab8500_gpio26() >= 0) { - /* Turn on FSMC device */ - writel(0x1, 0x8000f000); - writel(0x1, 0x8000f008); - - /* setup FSMC for LAN controler */ - writel(0x305b, 0x80000000); - - /* run at the highest possible speed */ - writel(0x01010210, 0x80000004); - } else - printf("error: can't raise GPIO26\n"); - - /* enable 3v6 for GBF chip */ - if ((raise_ab8500_gpio16() < 0)) - printf("error: cant' raise GPIO16\n"); - - /* empty UART RX FIFO */ - while (tstc()) - (void) getc(); - - return 0; -} - -#ifdef CONFIG_MMC -/* - * emmc_host_init - initialize the emmc controller. - * Configure GPIO settings, set initial clock and power for emmc slot. - * Initialize mmc struct and register with mmc framework. - */ -static int emmc_host_init(void) -{ - struct pl180_mmc_host *host; - - host = malloc(sizeof(struct pl180_mmc_host)); - if (!host) - return -ENOMEM; - memset(host, 0, sizeof(*host)); - - host->base = (struct sdi_registers *)CFG_EMMC_BASE; - host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON; - host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | - SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN; - strcpy(host->name, "EMMC"); - host->caps = MMC_MODE_8BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz; - host->voltages = VOLTAGE_WINDOW_MMC; - host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2); - host->clock_max = ARM_MCLK / 2; - host->clock_in = ARM_MCLK; - host->version2 = 1; - - return arm_pl180_mmci_init(host); -} - -/* - * mmc_host_init - initialize the external mmc controller. - * Configure GPIO settings, set initial clock and power for mmc slot. - * Initialize mmc struct and register with mmc framework. - */ -static int mmc_host_init(void) -{ - struct pl180_mmc_host *host; - u32 sdi_u32; - - host = malloc(sizeof(struct pl180_mmc_host)); - if (!host) - return -ENOMEM; - memset(host, 0, sizeof(*host)); - - host->base = (struct sdi_registers *)CFG_MMC_BASE; - sdi_u32 = 0xBF; - writel(sdi_u32, &host->base->power); - host->pwr_init = 0xBF; - host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | - SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN; - strcpy(host->name, "MMC"); - host->caps = MMC_MODE_8BIT; - host->b_max = 0; - host->voltages = VOLTAGE_WINDOW_SD; - host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2); - host->clock_max = ARM_MCLK / 2; - host->clock_in = ARM_MCLK; - host->version2 = 1; - - return arm_pl180_mmci_init(host); -} - -/* - * board_mmc_init - initialize all the mmc/sd host controllers. - * Called by generic mmc framework. - */ -int board_mmc_init(bd_t *bis) -{ - int error; - - (void) bis; - - error = emmc_host_init(); - if (error) { - printf("emmc_host_init() %d\n", error); - return -1; - } - - u8500_mmc_power_init(); - - error = mmc_host_init(); - if (error) { - printf("mmc_host_init() %d\n", error); - return -1; - } - - return 0; -} -#endif /* CONFIG_MMC */ diff --git a/board/st-ericsson/u8500/Kconfig b/board/st-ericsson/u8500/Kconfig deleted file mode 100644 index 909f30db4b..0000000000 --- a/board/st-ericsson/u8500/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_U8500_HREF - -config SYS_BOARD - default "u8500" - -config SYS_VENDOR - default "st-ericsson" - -config SYS_SOC - default "u8500" - -config SYS_CONFIG_NAME - default "u8500_href" - -endif diff --git a/board/st-ericsson/u8500/MAINTAINERS b/board/st-ericsson/u8500/MAINTAINERS deleted file mode 100644 index e2581eb2e4..0000000000 --- a/board/st-ericsson/u8500/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -U8500 BOARD -#M: - -S: Maintained -F: board/st-ericsson/u8500/ -F: include/configs/u8500_href.h -F: configs/u8500_href_defconfig diff --git a/board/st-ericsson/u8500/Makefile b/board/st-ericsson/u8500/Makefile deleted file mode 100644 index d6c4280475..0000000000 --- a/board/st-ericsson/u8500/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) ST-Ericsson SA 2009 -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ccflags-y += -D__RELEASE -D__STN_8500 - -obj-y := u8500_href.o gpio.o diff --git a/board/st-ericsson/u8500/gpio.c b/board/st-ericsson/u8500/gpio.c deleted file mode 100644 index 2ddc7af48b..0000000000 --- a/board/st-ericsson/u8500/gpio.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/gpio.h> - -static struct gpio_register *addr_gpio_register[] = { - (void *)U8500_GPIO_0_BASE, - (void *)U8500_GPIO_1_BASE, - (void *)U8500_GPIO_2_BASE, - (void *)U8500_GPIO_3_BASE, - (void *)U8500_GPIO_4_BASE, - (void *)U8500_GPIO_5_BASE, - (void *)U8500_GPIO_6_BASE, - (void *)U8500_GPIO_7_BASE, - (void *)U8500_GPIO_8_BASE, -}; - -struct gpio_altfun_data altfun_table[] = { - { - .altfun = GPIO_ALT_I2C_0, - .start = 147, - .end = 148, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_I2C_1, - .start = 16, - .end = 17, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_I2C_2, - .start = 10, - .end = 11, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_I2C_3, - .start = 229, - .end = 230, - .cont = 0, - .type = GPIO_ALTF_C, - }, - { - .altfun = GPIO_ALT_UART_0_MODEM, - .start = 0, - .end = 3, - .cont = 1, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_UART_0_MODEM, - .start = 33, - .end = 36, - .cont = 0, - .type = GPIO_ALTF_C, - }, - { - .altfun = GPIO_ALT_UART_1, - .start = 4, - .end = 7, - .cont = 0, - .type = - GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_UART_2, - .start = 18, - .end = 19, - .cont = 1, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_UART_2, - .start = 29, - .end = 32, - .cont = 0, - .type = GPIO_ALTF_C, - }, - { - .altfun = GPIO_ALT_MSP_0, - .start = 12, - .end = 17, - .cont = 1, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_MSP_0, - .start = 21, - .end = 21, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_MSP_1, - .start = 33, - .end = 36, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_MSP_2, - .start = 192, - .end = 196, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_LCD_PANEL, - .start = 64, - .end = 93, - .cont = 1, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_LCD_PANEL, - .start = 150, - .end = 171, - .cont = 0, - .type = GPIO_ALTF_B, - }, - { - .altfun = GPIO_ALT_SD_CARD0, - .start = 18, - .end = 28, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_MM_CARD0, - .start = 18, - .end = 32, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_USB_OTG, - .start = 256, - .end = 267, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_EMMC, - .start = 197, - .end = 207, - .cont = 0, - .type = GPIO_ALTF_A, - }, - { - .altfun = GPIO_ALT_POP_EMMC, - .start = 128, - .end = 138, - .cont = 0, - .type = GPIO_ALTF_A, - }, -}; - -/* - * Static Function declarations - */ -enum gpio_error gpio_setpinconfig(int pin_id, struct gpio_config *config) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - enum gpio_error error = GPIO_OK; - u32 temp_reg; - - switch (config->mode) { - case GPIO_ALTF_A: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - break; - case GPIO_ALTF_B: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - break; - case GPIO_ALTF_C: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg |= mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - break; - case GPIO_MODE_SOFTWARE: - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - - switch (config->direction) { - case GPIO_DIR_INPUT: - writel(mask, &p_gpio_register->gpio_dirc); - break; - case GPIO_DIR_OUTPUT: - writel(mask, &p_gpio_register->gpio_dirs); - break; - case GPIO_DIR_LEAVE_UNCHANGED: - break; - default: - return GPIO_INVALID_PARAMETER; - } - - break; - case GPIO_MODE_LEAVE_UNCHANGED: - break; - default: - return GPIO_INVALID_PARAMETER; - } - return error; -} - -enum gpio_error gpio_resetgpiopin(int pin_id, char *dev_name) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - enum gpio_error error = GPIO_OK; - u32 temp_reg; - - temp_reg = readl(&p_gpio_register->gpio_afsa); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsa); - temp_reg = readl(&p_gpio_register->gpio_afsb); - temp_reg &= ~mask; - writel(temp_reg, &p_gpio_register->gpio_afsb); - writel(mask, &p_gpio_register->gpio_dirc); - - return error; -} - -struct gpio_config altfun_pinconfig; -enum gpio_error gpio_altfunction(enum gpio_alt_function alt_func, - int which_altfunc, char *dev_name) -{ - int i, j, start, end; - enum gpio_error error = -1; - - for (i = 0; i < ARRAY_SIZE(altfun_table); i++) { - if (altfun_table[i].altfun != alt_func) - continue; - - start = altfun_table[i].start; - end = altfun_table[i].end; - for (j = start; j <= end; j++) { - if (which_altfunc == GPIO_ALTF_FIND) - altfun_pinconfig.mode = altfun_table[i].type; - else - altfun_pinconfig.mode = which_altfunc; - altfun_pinconfig.direction = GPIO_DIR_OUTPUT; - altfun_pinconfig.dev_name = dev_name; - - if (which_altfunc != GPIO_ALTF_DISABLE) - error = gpio_setpinconfig(j, &altfun_pinconfig); - else - error = gpio_resetgpiopin(j, dev_name); - if (!error) - continue; - printf("GPIO %d configuration failure (nmdk_error:%d)", - j, error); - error = GPIO_INVALID_PARAMETER; - return error; - } - - if (!altfun_table[i].cont) - break; - } - return error; -} - -int gpio_writepin(int pin_id, enum gpio_data value, char *dev_name) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - - switch (value) { - case GPIO_DATA_HIGH: - writel(mask, &p_gpio_register->gpio_dats); - break; - case GPIO_DATA_LOW: - writel(mask, &p_gpio_register->gpio_datc); - break; - default: - printf("Invalid value passed in %s", __FUNCTION__); - return GPIO_INVALID_PARAMETER; - } - return GPIO_OK; -} - -int gpio_readpin(int pin_id, enum gpio_data *rv) -{ - struct gpio_register *p_gpio_register = - addr_gpio_register[GPIO_BLOCK(pin_id)]; - u32 mask = 1UL << (pin_id % GPIO_PINS_PER_BLOCK); - - if ((readl(&p_gpio_register->gpio_dat) & mask) != 0) - *rv = GPIO_DATA_HIGH; - else - *rv = GPIO_DATA_LOW; - return GPIO_OK; -} - -int gpio_altfuncenable(enum gpio_alt_function altfunc, char *dev_name) -{ - return (int)gpio_altfunction(altfunc, GPIO_ALTF_FIND, dev_name); -} - -int gpio_altfuncdisable(enum gpio_alt_function altfunc, char *dev_name) -{ - return (int)gpio_altfunction(altfunc, GPIO_ALTF_DISABLE, dev_name); -} diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c deleted file mode 100644 index 9df499b1dc..0000000000 --- a/board/st-ericsson/u8500/u8500_href.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <malloc.h> -#include <i2c.h> -#include <asm/types.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/arch/clock.h> -#include <asm/arch/gpio.h> -#include <asm/arch/hardware.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/prcmu.h> -#ifdef CONFIG_MMC -#include "../../../drivers/mmc/arm_pl180_mmci.h" -#endif - -#define NOMADIK_PER4_BASE (0x80150000) -#define NOMADIK_BACKUPRAM0_BASE (NOMADIK_PER4_BASE + 0x00000) -#define NOMADIK_BACKUPRAM1_BASE (NOMADIK_PER4_BASE + 0x01000) - -/* Power, Reset, Clock Management Unit */ -/* - * SVA: Smart Video Accelerator - * SIA: Smart Imaging Accelerator - * SGA: Smart Graphic accelerator - * B2R2: Graphic blitter - */ -#define PRCM_ARMCLKFIX_MGT_REG (PRCMU_BASE + 0x000) -#define PRCM_ACLK_MGT_REG (PRCMU_BASE + 0x004) -#define PRCM_SVAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x008) -#define PRCM_SIAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x00C) -#define PRCM_SAAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x010) -#define PRCM_SGACLK_MGT_REG (PRCMU_BASE + 0x014) -#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018) -#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C) -#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020) -#define PRCM_SDMMCCLK_MGT_REG (PRCMU_BASE + 0x024) -#define PRCM_SLIMCLK_MGT_REG (PRCMU_BASE + 0x028) -#define PRCM_PER1CLK_MGT_REG (PRCMU_BASE + 0x02C) -#define PRCM_PER2CLK_MGT_REG (PRCMU_BASE + 0x030) -#define PRCM_PER3CLK_MGT_REG (PRCMU_BASE + 0x034) -#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038) -#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C) -#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040) -#define PRCM_DMACLK_MGT_REG (PRCMU_BASE + 0x074) -#define PRCM_B2R2CLK_MGT_REG (PRCMU_BASE + 0x078) - -#define PRCM_PLLSOC0_FREQ_REG (PRCMU_BASE + 0x080) -#define PRCM_PLLSOC1_FREQ_REG (PRCMU_BASE + 0x084) -#define PRCM_PLLARM_FREQ_REG (PRCMU_BASE + 0x088) -#define PRCM_PLLDDR_FREQ_REG (PRCMU_BASE + 0x08C) -#define PRCM_ARM_CHGCLKREQ_REG (PRCMU_BASE + 0x114) - -#define PRCM_TCR (PRCMU_BASE + 0x1C8) - -/* - * Memory controller register - */ -#define DMC_BASE_ADDR 0x80156000 -#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184) - -int board_id; /* set in board_late_init() */ - -/* PLLs for clock management registers */ -enum { - GATED = 0, - PLLSOC0, /* pllsw = 001, ffs() = 1 */ - PLLSOC1, /* pllsw = 010, ffs() = 2 */ - PLLDDR, /* pllsw = 100, ffs() = 3 */ - PLLARM, -}; - -static struct pll_freq_regs { - int idx; /* index fror pll_name and pll_khz arrays */ - uint32_t addr; -} pll_freq_regs[] = { - {PLLSOC0, PRCM_PLLSOC0_FREQ_REG}, - {PLLSOC1, PRCM_PLLSOC1_FREQ_REG}, - {PLLDDR, PRCM_PLLDDR_FREQ_REG}, - {PLLARM, PRCM_PLLARM_FREQ_REG}, - {0, 0}, -}; - -static const char *pll_name[5] = {"GATED", "SOC0", "SOC1", "DDR", "ARM"}; -static uint32_t pll_khz[5]; /* use ffs(pllsw(reg)) as index for 0..3 */ - -static struct clk_mgt_regs { - uint32_t addr; - uint32_t val; - const char *descr; -} clk_mgt_regs[] = { - /* register content taken from bootrom settings */ - {PRCM_ARMCLKFIX_MGT_REG, 0x0120, "ARMCLKFIX"}, /* ena, SOC0/0, ??? */ - {PRCM_ACLK_MGT_REG, 0x0125, "ACLK"}, /* ena, SOC0/5, 160 MHz */ - {PRCM_SVAMMDSPCLK_MGT_REG, 0x1122, "SVA"}, /* ena, SOC0/2, 400 MHz */ - {PRCM_SIAMMDSPCLK_MGT_REG, 0x0022, "SIA"}, /* dis, SOC0/2, 400 MHz */ - {PRCM_SAAMMDSPCLK_MGT_REG, 0x0822, "SAA"}, /* dis, SOC0/4, 200 MHz */ - {PRCM_SGACLK_MGT_REG, 0x0024, "SGA"}, /* dis, SOC0/4, 200 MHz */ - {PRCM_UARTCLK_MGT_REG, 0x0300, "UART"}, /* ena, GATED, CLK38 */ - {PRCM_MSPCLK_MGT_REG, 0x0200, "MSP"}, /* dis, GATED, CLK38 */ - {PRCM_I2CCLK_MGT_REG, 0x0130, "I2C"}, /* ena, SOC0/16, 50 MHz */ - {PRCM_SDMMCCLK_MGT_REG, 0x0130, "SDMMC"}, /* ena, SOC0/16, 50 MHz */ - {PRCM_PER1CLK_MGT_REG, 0x126, "PER1"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER2CLK_MGT_REG, 0x126, "PER2"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER3CLK_MGT_REG, 0x126, "PER3"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER5CLK_MGT_REG, 0x126, "PER5"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER6CLK_MGT_REG, 0x126, "PER6"}, /* ena, SOC0/6, 133 MHz */ - {PRCM_PER7CLK_MGT_REG, 0x128, "PER7"}, /* ena, SOC0/8, 100 MHz */ - {PRCM_DMACLK_MGT_REG, 0x125, "DMA"}, /* ena, SOC0/5, 160 MHz */ - {PRCM_B2R2CLK_MGT_REG, 0x025, "B2R2"}, /* dis, SOC0/5, 160 MHz */ - {0, 0, NULL}, -}; - -static void init_regs(void); - -DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SHOW_BOOT_PROGRESS) -void show_boot_progress(int progress) -{ - printf("Boot reached stage %d\n", progress); -} -#endif - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_early_init_f(void) -{ - init_regs(); - return 0; -} - -int board_init(void) -{ - uint32_t unused_cols_rows; - unsigned int nrows; - unsigned int ncols; - - gd->bd->bi_arch_number = 0x1A4; - gd->bd->bi_boot_params = 0x00000100; - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - - /* - * Assumption: 2 CS active, both CS have same layout. - * 15 rows max, 11 cols max (controller spec). - * memory chip has 8 banks, I/O width 32 bit. - * The correct way would be to read MR#8: I/O width and density, - * but this requires locking against the PRCMU firmware. - * Simplified approach: - * Read number of unused rows and columns from mem controller. - * size = nCS x 2^(rows+cols) x nbanks x buswidth_bytes - */ - unused_cols_rows = readl(DMC_CTL_97); - nrows = 15 - (unused_cols_rows & 0x07); - ncols = 11 - ((unused_cols_rows & 0x0700) >> 8); - gd->bd->bi_dram[0].size = 2 * (1 << (nrows + ncols)) * 8 * 4; - - icache_enable(); - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = PHYS_SDRAM_SIZE_1; - - return 0; -} - -unsigned int addr_vall_arr[] = { - 0x8011F000, 0x0000FFFF, /* Clocks for HSI TODO: Enable reqd only */ - 0x8011F008, 0x00001CFF, /* Clocks for HSI TODO: Enable reqd only */ - 0x8000F000, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */ - 0x8000F008, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */ - 0x80157020, 0x00000150, /* I2C 48MHz clock */ - 0x8012F000, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */ - 0x8012F008, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */ - 0xA03DF000, 0x0000000D, /* Clock for MTU Timers */ - 0x8011E00C, 0x00000000, /* GPIO ALT FUNC for EMMC */ - 0x8011E004, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */ - 0x8011E020, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */ - 0x8011E024, 0x00000000, /* GPIO ALT FUNC for EMMC */ - 0x8012E000, 0x20000000, /* GPIO ALT FUNC for UART */ - 0x8012E00C, 0x00000000, /* GPIO ALT FUNC for SD */ - 0x8012E004, 0x0FFC0000, /* GPIO ALT FUNC for SD */ - 0x8012E020, 0x60000000, /* GPIO ALT FUNC for SD */ - 0x8012E024, 0x60000000, /* GPIO ALT FUNC for SD */ - 0x801571E4, 0x0000000C, /* PRCMU settings for B2R2, - PRCM_APE_RESETN_SET_REG */ - 0x80157024, 0x00000130, /* PRCMU settings for EMMC/SD */ - 0xA03FF000, 0x00000003, /* USB */ - 0xA03FF008, 0x00000001, /* USB */ - 0xA03FE00C, 0x00000000, /* USB */ - 0xA03FE020, 0x00000FFF, /* USB */ - 0xA03FE024, 0x00000000 /* USB */ -}; - -#ifdef CONFIG_BOARD_LATE_INIT -/* - * called after all initialisation were done, but before the generic - * mmc_initialize(). - */ -int board_late_init(void) -{ - uchar byte; - - /* - * Determine and set board_id environment variable - * 0: mop500, 1: href500 - * Above boards have different GPIO expander chips which we can - * distinguish by the chip id. - * - * The board_id environment variable is needed for the Linux bootargs. - */ - (void) i2c_set_bus_num(0); - (void) i2c_read(CONFIG_SYS_I2C_GPIOE_ADDR, 0x80, 1, &byte, 1); - if (byte == 0x01) { - board_id = 0; - setenv("board_id", "0"); - } else { - board_id = 1; - setenv("board_id", "1"); - } -#ifdef CONFIG_MMC - u8500_mmc_power_init(); - - /* - * config extended GPIO pins for level shifter and - * SDMMC_ENABLE - */ - if (board_id == 0) { - /* MOP500 */ - byte = 0x0c; - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x89, 1, &byte, 1); - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x83, 1, &byte, 1); - } else { - /* HREF */ - /* set the direction of GPIO KPY9 and KPY10 */ - byte = 0x06; - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC8, 1, &byte, 1); - /* must be a multibyte access */ - (void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC4, 1, - (uchar []) {0x06, 0x06}, 2); - } -#endif /* CONFIG_MMC */ - /* - * Create a memargs variable which points uses either the memargs256 or - * memargs512 environment variable, depending on the memory size. - * memargs is used to build the bootargs, memargs256 and memargs512 are - * stored in the environment. - */ - if (gd->bd->bi_dram[0].size == 0x10000000) { - setenv("memargs", "setenv bootargs ${bootargs} ${memargs256}"); - setenv("mem", "256M"); - } else { - setenv("memargs", "setenv bootargs ${bootargs} ${memargs512}"); - setenv("mem", "512M"); - } - - return 0; -} -#endif /* CONFIG_BOARD_LATE_INIT */ - -static void early_gpio_setup(struct gpio_register *gpio_reg, u32 bits) -{ - writel(readl(&gpio_reg->gpio_dats) | bits, &gpio_reg->gpio_dats); - writel(readl(&gpio_reg->gpio_pdis) & ~bits, &gpio_reg->gpio_pdis); -} - -static void init_regs(void) -{ - /* FIXME Remove magic register array settings for ED also */ - struct prcmu *prcmu = (struct prcmu *) U8500_PRCMU_BASE; - - /* Enable timers */ - writel(1 << 17, &prcmu->tcr); - - u8500_prcmu_enable(&prcmu->per1clk_mgt); - u8500_prcmu_enable(&prcmu->per2clk_mgt); - u8500_prcmu_enable(&prcmu->per3clk_mgt); - u8500_prcmu_enable(&prcmu->per5clk_mgt); - u8500_prcmu_enable(&prcmu->per6clk_mgt); - u8500_prcmu_enable(&prcmu->per7clk_mgt); - - u8500_prcmu_enable(&prcmu->uartclk_mgt); - u8500_prcmu_enable(&prcmu->i2cclk_mgt); - - u8500_prcmu_enable(&prcmu->sdmmcclk_mgt); - - u8500_clock_enable(1, 9, -1); /* GPIO0 */ - - u8500_clock_enable(2, 11, -1); /* GPIO1 */ - - u8500_clock_enable(3, 8, -1); /* GPIO2 */ - u8500_clock_enable(5, 1, -1); /* GPIO3 */ - - u8500_clock_enable(3, 6, 6); /* UART2 */ - - gpio_altfuncenable(GPIO_ALT_I2C_0, "I2C0"); - u8500_clock_enable(3, 3, 3); /* I2C0 */ - - early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x60000000); - gpio_altfuncenable(GPIO_ALT_UART_2, "UART2"); - - early_gpio_setup((struct gpio_register *)U8500_GPIO_6_BASE, 0x0000ffe0); - gpio_altfuncenable(GPIO_ALT_EMMC, "EMMC"); - - early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x0000ffe0); - gpio_altfuncenable(GPIO_ALT_SD_CARD0, "SDCARD"); - - u8500_clock_enable(1, 5, 5); /* SDI0 */ - u8500_clock_enable(2, 4, 2); /* SDI4 */ - - u8500_clock_enable(6, 7, -1); /* MTU0 */ - u8500_clock_enable(3, 4, 4); /* SDI2 */ - - early_gpio_setup((struct gpio_register *)U8500_GPIO_4_BASE, 0x000007ff); - gpio_altfuncenable(GPIO_ALT_POP_EMMC, "EMMC"); - - /* - * Enabling clocks for all devices which are AMBA devices in the - * kernel. Otherwise they will not get probe()'d because the - * peripheral ID register will not be powered. - */ - - /* XXX: some of these differ between ED/V1 */ - - u8500_clock_enable(1, 1, 1); /* UART1 */ - u8500_clock_enable(1, 0, 0); /* UART0 */ - - u8500_clock_enable(3, 2, 2); /* SSP1 */ - u8500_clock_enable(3, 1, 1); /* SSP0 */ - - u8500_clock_enable(2, 8, -1); /* SPI0 */ - u8500_clock_enable(2, 5, 3); /* MSP2 */ -} - -#ifdef CONFIG_MMC -static int u8500_mmci_board_init(void) -{ - enum gpio_error error; - struct gpio_register *gpio_base_address; - - gpio_base_address = (void *)(U8500_GPIO_0_BASE); - gpio_base_address->gpio_dats |= 0xFFC0000; - gpio_base_address->gpio_pdis &= ~0xFFC0000; - - /* save the GPIO0 AFSELA register */ - error = gpio_altfuncenable(GPIO_ALT_SD_CARD0, "MMC"); - if (error != GPIO_OK) { - printf("u8500_mmci_board_init() gpio_altfuncenable failed\n"); - return -ENODEV; - } - return 0; -} - -int board_mmc_init(bd_t *bd) -{ - struct pl180_mmc_host *host; - - if (u8500_mmci_board_init()) - return -ENODEV; - - host = malloc(sizeof(struct pl180_mmc_host)); - if (!host) - return -ENOMEM; - memset(host, 0, sizeof(*host)); - - strcpy(host->name, "MMC"); - host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE; - host->pwr_init = INIT_PWR; - host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN; - host->voltages = VOLTAGE_WINDOW_MMC; - host->caps = 0; - host->clock_in = ARM_MCLK; - host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1)); - host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ; - - return arm_pl180_mmci_init(host); -} -#endif - - -/* - * get_pll_freq_khz - return PLL frequency in kHz - */ -static uint32_t get_pll_freq_khz(uint32_t inclk_khz, uint32_t freq_reg) -{ - uint32_t idf, ldf, odf, seldiv, phi; - - /* - * PLLOUTCLK = PHI = (INCLK*LDF)/(2*ODF*IDF) if SELDIV2=0 - * PLLOUTCLK = PHI = (INCLK*LDF)/(4*ODF*IDF) if SELDIV2=1 - * where: - * IDF=R(2:0) (when R=000, IDF=1d) - * LDF = 2*D(7:0) (D must be greater than or equal to 6) - * ODF = N(5:0) (when N=000000, 0DF=1d) - */ - - idf = (freq_reg & 0x70000) >> 16; - ldf = (freq_reg & 0xff) * 2; - odf = (freq_reg & 0x3f00) >> 8; - seldiv = (freq_reg & 0x01000000) >> 24; - phi = (inclk_khz * ldf) / (2 * odf * idf); - if (seldiv) - phi = phi/2; - - return phi; -} - -int do_clkinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - uint32_t inclk_khz; - uint32_t reg, phi; - uint32_t clk_khz; - unsigned int clk_sel; - struct clk_mgt_regs *clks = clk_mgt_regs; - struct pll_freq_regs *plls = pll_freq_regs; - - /* - * Go through list of PLLs. - * Initialise pll out frequency array (pll_khz) and print frequency. - */ - inclk_khz = 38400; /* 38.4 MHz */ - while (plls->addr) { - reg = readl(plls->addr); - phi = get_pll_freq_khz(inclk_khz, reg); - pll_khz[plls->idx] = phi; - printf("%s PLL out frequency: %d.%d Mhz\n", - pll_name[plls->idx], phi/1000, phi % 1000); - plls++; - } - - /* check ARM clock source */ - reg = readl(PRCM_ARM_CHGCLKREQ_REG); - printf("A9 running on %s\n", - (reg & 1) ? "external clock" : "ARM PLL"); - - /* go through list of clk_mgt_reg */ - printf("\n%19s %9s %7s %9s enabled\n", - "name(addr)", "value", "PLL", "CLK[MHz]"); - while (clks->addr) { - reg = readl(clks->addr); - - /* convert bit position into array index */ - clk_sel = ffs((reg >> 5) & 0x7); /* PLLSW[2:0] */ - - if (reg & 0x200) - clk_khz = 38400; /* CLK38 is set */ - else if ((reg & 0x1f) == 0) - /* ARMCLKFIX_MGT is 0x120, e.g. div = 0 ! */ - clk_khz = 0; - else - clk_khz = pll_khz[clk_sel] / (reg & 0x1f); - - printf("%9s(%08x): %08x, %6s, %4d.%03d, %s\n", - clks->descr, clks->addr, reg, pll_name[clk_sel], - clk_khz / 1000, clk_khz % 1000, - (reg & 0x100) ? "ena" : "dis"); - clks++; - } - - return 0; -} - -U_BOOT_CMD( - clkinfo, 1, 1, do_clkinfo, - "print clock info", - "" -); diff --git a/board/st/nhk8815/Kconfig b/board/st/nhk8815/Kconfig deleted file mode 100644 index 94547dc118..0000000000 --- a/board/st/nhk8815/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if NOMADIK_NHK8815 - -config SYS_BOARD - default "nhk8815" - -config SYS_VENDOR - default "st" - -config SYS_CONFIG_NAME - default "nhk8815" - -endif diff --git a/board/st/nhk8815/MAINTAINERS b/board/st/nhk8815/MAINTAINERS deleted file mode 100644 index 72c3a8d903..0000000000 --- a/board/st/nhk8815/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -NHK8815 BOARD -M: Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com> -M: Alessandro Rubini <rubini@unipv.it> -S: Maintained -F: board/st/nhk8815/ -F: include/configs/nhk8815.h -F: configs/nhk8815_defconfig -F: configs/nhk8815_onenand_defconfig diff --git a/board/st/nhk8815/Makefile b/board/st/nhk8815/Makefile deleted file mode 100644 index dd56944db1..0000000000 --- a/board/st/nhk8815/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2004 -# ARM Ltd. -# Philippe Robin, <philippe.robin@arm.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := nhk8815.o diff --git a/board/st/nhk8815/README.nhk8815 b/board/st/nhk8815/README.nhk8815 deleted file mode 100644 index 9008e39363..0000000000 --- a/board/st/nhk8815/README.nhk8815 +++ /dev/null @@ -1,32 +0,0 @@ - -The Nomadik 8815 CPU has a "secure" boot mode where no external access -(not even JTAG) is allowed. The "remap" bits in the evaluation board -are configured in order to boot from the internal ROM memory (in -secure mode). - -The boot process as defined by the manufacturer executes external code -(loaded from NAND or OneNAND) that that disables such "security" in -order to run u-boot and later the kernel without constraints. Such -code is a proprietary initial boot loader, called "X-Loader" (in case -anyone wonders, it has no relations with other loaders with the same -name and there is no GPL code inside the ST X-Loader). - -SDRAM configuration, PLL setup and initial loading from NAND is -implemented in the X-Loader, so U-Boot is already running in SDRAM -when control is handed over to it. - -The Makefile offers two different configurations to be used if you -boot from Nand or OneNand. - - make nhk8815_config - make nhk8815_onenand_config - -Both support OneNand and Nand. Since U-Boot, running in RAM, can't know -where it was loaded from, the configurations differ in where the filesystem -is looked for by default. - - -On www.st.com/nomadik and on www.stnwireless.com there are documents, -summary data and white papers on Nomadik. The full datasheet for -STn8815 is not currently available on line but under specific request -to the local ST sales offices. diff --git a/board/st/nhk8815/nhk8815.c b/board/st/nhk8815/nhk8815.c deleted file mode 100644 index 94d0f76266..0000000000 --- a/board/st/nhk8815/nhk8815.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * (C) Copyright 2005 - * STMicrolelctronics, <www.st.com> - * - * (C) Copyright 2004 - * ARM Ltd. - * Philippe Robin, <philippe.robin@arm.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/io.h> -#include <asm/arch/gpio.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_SHOW_BOOT_PROGRESS -void show_boot_progress(int progress) -{ - printf("%i\n", progress); -} -#endif - -/* - * Miscellaneous platform dependent initialisations - */ -int board_init(void) -{ - gd->bd->bi_arch_number = MACH_TYPE_NOMADIK; - gd->bd->bi_boot_params = 0x00000100; - writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20); - writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24); - writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28); - writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE); - - /* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */ - writel(0x0000305b, REG_FSMC_BCR1); - writel(0x00033f33, REG_FSMC_BTR1); - - /* Set up SMCS0 for OneNand: sram-like once again */ - writel(0x000030db, NOMADIK_FSMC_BASE + 0x00); /* FSMC_BCR0 */ - writel(0x02100551, NOMADIK_FSMC_BASE + 0x04); /* FSMC_BTR0 */ - - icache_enable(); - return 0; -} - -int board_late_init(void) -{ - /* Set the two I2C gpio lines to be gpio high */ - nmk_gpio_set(__SCL, 1); nmk_gpio_set(__SDA, 1); - nmk_gpio_dir(__SCL, 1); nmk_gpio_dir(__SDA, 1); - nmk_gpio_af(__SCL, GPIO_GPIO); nmk_gpio_af(__SDA, GPIO_GPIO); - - /* Reset the I2C port expander, on GPIO77 */ - nmk_gpio_af(77, GPIO_GPIO); - nmk_gpio_dir(77, 1); - nmk_gpio_set(77, 0); - udelay(10); - nmk_gpio_set(77, 1); - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 3a4d1fbfb8..67a9d294d2 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -8,13 +8,16 @@ F: configs/ba10_tv_box_defconfig F: configs/Chuwi_V7_CW0825_defconfig F: configs/Cubieboard_defconfig F: configs/Hyundai_A7HD_defconfig +F: configs/inet1_defconfig F: configs/inet97fv2_defconfig +F: configs/inet9f_rev03_defconfig F: configs/jesurun_q5_defconfig F: configs/Mele_A1000_defconfig F: configs/Mele_M3_defconfig F: configs/Mini-X_defconfig F: configs/mk802_defconfig F: configs/mk802ii_defconfig +F: configs/pov_protab2_ips9_defconfig F: include/configs/sun5i.h F: configs/A10s-OLinuXino-M_defconfig F: configs/A13-OLinuXino_defconfig @@ -23,12 +26,14 @@ F: configs/Auxtek-T003_defconfig F: configs/Auxtek-T004_defconfig F: configs/inet98v_rev2_defconfig F: configs/mk802_a10s_defconfig +F: configs/q8_a13_tablet_defconfig F: configs/r7-tv-dongle_defconfig F: configs/UTOO_P66_defconfig F: include/configs/sun6i.h F: configs/CSQ_CS908_defconfig F: configs/Mele_A1000G_quad_defconfig F: configs/Mele_M9_defconfig +F: configs/Wobo_i5_defconfig F: include/configs/sun7i.h F: configs/A20-OLinuXino_MICRO_defconfig F: configs/Bananapi_defconfig @@ -45,6 +50,9 @@ F: configs/ga10h_v1_1_defconfig F: configs/gt90h_v4_defconfig F: configs/Ippo_q8h_v1_2_defconfig F: configs/Ippo_q8h_v1_2_a33_1024x600_defconfig +F: configs/q8_a23_tablet_800x480_defconfig +F: configs/q8_a33_tablet_800x480_defconfig +F: configs/q8_a33_tablet_1024x600_defconfig F: include/configs/sun9i.h F: configs/Merrii_A80_Optimus_defconfig diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 9c855f604d..096d12791c 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -516,6 +516,31 @@ void get_board_serial(struct tag_serialnr *serialnr) } #endif +#if !defined(CONFIG_SPL_BUILD) +#include <asm/arch/spl.h> + +/* + * Check the SPL header for the "sunxi" variant. If found: parse values + * that might have been passed by the loader ("fel" utility), and update + * the environment accordingly. + */ +static void parse_spl_header(const uint32_t spl_addr) +{ + struct boot_file_head *spl = (void *)spl_addr; + if (memcmp(spl->spl_signature, SPL_SIGNATURE, 3) == 0) { + uint8_t spl_header_version = spl->spl_signature[3]; + if (spl_header_version == SPL_HEADER_VERSION) { + if (spl->fel_script_address) + setenv_hex("fel_scriptaddr", + spl->fel_script_address); + return; + } + printf("sunxi SPL version mismatch: expected %u, got %u\n", + SPL_HEADER_VERSION, spl_header_version); + } +} +#endif + #ifdef CONFIG_MISC_INIT_R int misc_init_r(void) { @@ -524,6 +549,16 @@ int misc_init_r(void) uint8_t mac_addr[6]; int ret; +#if !defined(CONFIG_SPL_BUILD) + setenv("fel_booted", NULL); + setenv("fel_scriptaddr", NULL); + /* determine if we are running in FEL mode */ + if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */ + setenv("fel_booted", "1"); + parse_spl_header(SPL_ADDR); + } +#endif + ret = sunxi_get_sid(sid); if (ret == 0 && sid[0] != 0 && sid[3] != 0) { if (!getenv("ethaddr")) { diff --git a/board/synopsys/axs101/axs101.c b/board/synopsys/axs101/axs101.c index d4280f743a..aa446b916e 100644 --- a/board/synopsys/axs101/axs101.c +++ b/board/synopsys/axs101/axs101.c @@ -30,7 +30,7 @@ int board_mmc_init(bd_t *bis) host->dev_index = 0; host->bus_hz = 50000000; - add_dwmci(host, host->bus_hz, 400000); + add_dwmci(host, host->bus_hz / 2, 400000); return 0; } diff --git a/board/taskit/stamp9g20/Kconfig b/board/taskit/stamp9g20/Kconfig deleted file mode 100644 index 1121dacfc7..0000000000 --- a/board/taskit/stamp9g20/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_STAMP9G20 - -config SYS_BOARD - default "stamp9g20" - -config SYS_VENDOR - default "taskit" - -config SYS_CONFIG_NAME - default "stamp9g20" - -endif diff --git a/board/taskit/stamp9g20/MAINTAINERS b/board/taskit/stamp9g20/MAINTAINERS deleted file mode 100644 index a91c1960cb..0000000000 --- a/board/taskit/stamp9g20/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -STAMP9G20 BOARD -M: Markus Hubig <mhubig@imko.de> -S: Maintained -F: board/taskit/stamp9g20/ -F: include/configs/stamp9g20.h -F: configs/portuxg20_defconfig -F: configs/stamp9g20_defconfig diff --git a/board/taskit/stamp9g20/Makefile b/board/taskit/stamp9g20/Makefile deleted file mode 100644 index d015e0f740..0000000000 --- a/board/taskit/stamp9g20/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop <stelian@popies.net> -# Lead Tech Design <www.leadtechdesign.com> -# -# (C) Copyright 2012 -# Markus Hubig <mhubig@imko.de> -# IMKO GmbH <www.imko.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += stamp9g20.o -obj-y += led.o diff --git a/board/taskit/stamp9g20/led.c b/board/taskit/stamp9g20/led.c deleted file mode 100644 index c5831258bd..0000000000 --- a/board/taskit/stamp9g20/led.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright (c) 2009 Wind River Systems, Inc. - * Tom Rix <Tom.Rix@windriver.com> - * (C) Copyright 2009 - * Eric Benard <eric@eukrea.com> - * - * (C) Copyright 2012 - * Markus Hubig <mhubig@imko.de> - * IMKO GmbH <www.imko.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91_pmc.h> -#include <status_led.h> - -static unsigned int saved_state[3] = {STATUS_LED_OFF, - STATUS_LED_OFF, STATUS_LED_OFF}; - -void coloured_LED_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable the clock */ - writel(ATMEL_ID_PIOC, &pmc->pcer); - - at91_set_gpio_output(CONFIG_RED_LED, 1); - at91_set_gpio_output(CONFIG_GREEN_LED, 1); - at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - - at91_set_gpio_value(CONFIG_RED_LED, 0); - at91_set_gpio_value(CONFIG_GREEN_LED, 1); - at91_set_gpio_value(CONFIG_YELLOW_LED, 0); -} - -void red_led_on(void) -{ - at91_set_gpio_value(CONFIG_RED_LED, 1); - saved_state[STATUS_LED_RED] = STATUS_LED_ON; -} - -void red_led_off(void) -{ - at91_set_gpio_value(CONFIG_RED_LED, 0); - saved_state[STATUS_LED_RED] = STATUS_LED_OFF; -} - -void green_led_on(void) -{ - at91_set_gpio_value(CONFIG_GREEN_LED, 1); - saved_state[STATUS_LED_GREEN] = STATUS_LED_ON; -} - -void green_led_off(void) -{ - at91_set_gpio_value(CONFIG_GREEN_LED, 0); - saved_state[STATUS_LED_GREEN] = STATUS_LED_OFF; -} - -void yellow_led_on(void) -{ - at91_set_gpio_value(CONFIG_YELLOW_LED, 1); - saved_state[STATUS_LED_YELLOW] = STATUS_LED_ON; -} - -void yellow_led_off(void) -{ - at91_set_gpio_value(CONFIG_YELLOW_LED, 0); - saved_state[STATUS_LED_YELLOW] = STATUS_LED_OFF; -} - -void __led_init(led_id_t mask, int state) -{ - __led_set(mask, state); -} - -void __led_toggle(led_id_t mask) -{ - if (STATUS_LED_RED == mask) { - if (STATUS_LED_ON == saved_state[STATUS_LED_RED]) - red_led_off(); - else - red_led_on(); - - } else if (STATUS_LED_GREEN == mask) { - if (STATUS_LED_ON == saved_state[STATUS_LED_GREEN]) - green_led_off(); - else - green_led_on(); - - } else if (STATUS_LED_YELLOW == mask) { - if (STATUS_LED_ON == saved_state[STATUS_LED_YELLOW]) - yellow_led_off(); - else - yellow_led_on(); - } -} - -void __led_set(led_id_t mask, int state) -{ - if (STATUS_LED_RED == mask) { - if (STATUS_LED_ON == state) - red_led_on(); - else - red_led_off(); - - } else if (STATUS_LED_GREEN == mask) { - if (STATUS_LED_ON == state) - green_led_on(); - else - green_led_off(); - - } else if (STATUS_LED_YELLOW == mask) { - if (STATUS_LED_ON == state) - yellow_led_on(); - else - yellow_led_off(); - } -} diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c deleted file mode 100644 index 27cdf77f01..0000000000 --- a/board/taskit/stamp9g20/stamp9g20.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * Achim Ehrlich <aehrlich@taskit.de> - * taskit GmbH <www.taskit.de> - * - * (C) Copyright 2012- - * Markus Hubig <mhubig@imko.de> - * IMKO GmbH <www.imko.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/at91sam9260_matrix.h> -#include <asm/arch/at91sam9_smc.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> -#include <watchdog.h> - -#ifdef CONFIG_MACB -# include <net.h> -# include <netdev.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -static void stamp9G20_nand_hw_init(void) -{ - struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; - struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - unsigned long csa; - - /* Assign CS3 to NAND/SmartMedia Interface */ - csa = readl(&matrix->ebicsa); - csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; - writel(csa, &matrix->ebicsa); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[3].setup); - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(2), - &smc->cs[3].mode); - - /* Configure RDY/BSY */ - at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); - - /* Enable NandFlash */ - at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} - -#ifdef CONFIG_MACB -static void stamp9G20_macb_hw_init(void) -{ - struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - - /* Enable the PHY Chip via PA26 on the Stamp 2 Adaptor */ - at91_set_gpio_output(AT91_PIN_PA26, 0); - - /* - * Disable pull-up on: - * RXDV (PA17) => PHY normal mode (not Test mode) - * ERX0 (PA14) => PHY ADDR0 - * ERX1 (PA15) => PHY ADDR1 - * ERX2 (PA25) => PHY ADDR2 - * ERX3 (PA26) => PHY ADDR3 - * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 - * - * PHY has internal pull-down - */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA18) | - pin_to_mask(AT91_PIN_PA28), - &pioa->pudr); - - at91_phy_reset(); - - /* Re-enable pull-up */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA18) | - pin_to_mask(AT91_PIN_PA28), - &pioa->puer); - - /* Initialize EMAC=MACB hardware */ - at91_macb_hw_init(); -} -#endif /* CONFIG_MACB */ - -int board_early_init_f(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOC), &pmc->pcer); - - return 0; -} - -int board_postclk_init(void) -{ - /* - * Initialize the serial interface here, because be need a running - * timer to set PC9 to high and wait for some time to enable the - * level converter of the RS232 interface on the PortuxG20 board. - */ - -#ifdef CONFIG_PORTUXG20 - at91_set_gpio_output(AT91_PIN_PC9, 1); - mdelay(1); -#endif - at91_seriald_hw_init(); - - return 0; -} - -int board_init(void) -{ - /* Adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - stamp9G20_nand_hw_init(); -#ifdef CONFIG_MACB - stamp9G20_macb_hw_init(); -#endif - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size( - (void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -#ifdef CONFIG_MACB -int board_eth_init(bd_t *bis) -{ - return macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00); -} -#endif /* CONFIG_MACB */ diff --git a/board/tcl/sl50/Kconfig b/board/tcl/sl50/Kconfig new file mode 100644 index 0000000000..390a47631e --- /dev/null +++ b/board/tcl/sl50/Kconfig @@ -0,0 +1,31 @@ +if TARGET_AM335X_SL50 + +config SYS_BOARD + default "sl50" + +config SYS_VENDOR + default "tcl" + +config SYS_SOC + default "am33xx" + +config SYS_CONFIG_NAME + default "am335x_sl50" + +config CONS_INDEX + int "UART used for console" + range 1 6 + default 1 + help + The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced + in documentation, etc) available to it. Depending on your specific + board you may want something other than UART0 as for example the IDK + uses UART3 so enter 4 here. + +config DM_GPIO + default y + +config DM_SERIAL + default y + +endif diff --git a/board/tcl/sl50/MAINTAINERS b/board/tcl/sl50/MAINTAINERS new file mode 100644 index 0000000000..29f1e3d050 --- /dev/null +++ b/board/tcl/sl50/MAINTAINERS @@ -0,0 +1,6 @@ +SL50 BOARD +M: Enric Balletbo i Serra <enric.balletbo@collabora.com> +S: Maintained +F: board/tcl/sl50/ +F: include/configs/am335x_sl50.h +F: configs/am335x_sl50_defconfig diff --git a/board/tcl/sl50/Makefile b/board/tcl/sl50/Makefile new file mode 100644 index 0000000000..d4a548cd81 --- /dev/null +++ b/board/tcl/sl50/Makefile @@ -0,0 +1,13 @@ +# +# Makefile +# +# Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) +obj-y := mux.o +endif + +obj-y += board.o diff --git a/board/tcl/sl50/board.c b/board/tcl/sl50/board.c new file mode 100644 index 0000000000..e89ee35d30 --- /dev/null +++ b/board/tcl/sl50/board.c @@ -0,0 +1,386 @@ +/* + * board.c + * + * Board functions for TCL SL50 board + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <power/tps65217.h> +#include <power/tps65910.h> +#include <environment.h> +#include <watchdog.h> +#include <environment.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + +static const struct ddr_data ddr3_sl50_data = { + .datardsratio0 = MT41K256M16HA125E_RD_DQS, + .datawdsratio0 = MT41K256M16HA125E_WR_DQS, + .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, + .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, +}; + +static const struct cmd_control ddr3_sl50_cmd_ctrl_data = { + .cmd0csratio = MT41K256M16HA125E_RATIO, + .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd1csratio = MT41K256M16HA125E_RATIO, + .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd2csratio = MT41K256M16HA125E_RATIO, + .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_sl50_emif_reg_data = { + .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, + .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, + .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, + .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, + .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, + .zq_config = MT41K256M16HA125E_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, +}; + +#ifdef CONFIG_SPL_OS_BOOT +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + +#ifdef CONFIG_SPL_ENV_SUPPORT + env_init(); + env_relocate_spec(); + if (getenv_yesno("boot_os") != 1) + return 1; +#endif + + return 0; +} +#endif + +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr_sl50 = { + 400, OSC-1, 1, -1, -1, -1, -1}; + +void am33xx_spl_board_init(void) +{ + int mpu_vdd; + + /* Get the frequency */ + dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); + + /* BeagleBone PMIC Code */ + int usb_cur_lim; + + if (i2c_probe(TPS65217_CHIP_PM)) + return; + + /* + * Increase USB current limit to 1300mA or 1800mA and set + * the MPU voltage controller as needed. + */ + if (dpll_mpu_opp100.m == MPUPLL_M_1000) { + usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA; + mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV; + } else { + usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA; + mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV; + } + + if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, + TPS65217_POWER_PATH, + usb_cur_lim, + TPS65217_USB_INPUT_CUR_LIMIT_MASK)) + puts("tps65217_reg_write failure\n"); + + /* Set DCDC3 (CORE) voltage to 1.125V */ + if (tps65217_voltage_update(TPS65217_DEFDCDC3, + TPS65217_DCDC_VOLT_SEL_1125MV)) { + puts("tps65217_voltage_update failure\n"); + return; + } + + /* Set CORE Frequencies to OPP100 */ + do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); + + /* Set DCDC2 (MPU) voltage */ + if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) { + puts("tps65217_voltage_update failure\n"); + return; + } + + /* + * Set LDO3 to 1.8V and LDO4 to 3.3V + */ + if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, + TPS65217_DEFLS1, + TPS65217_LDO_VOLTAGE_OUT_1_8, + TPS65217_LDO_MASK)) + puts("tps65217_reg_write failure\n"); + + if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, + TPS65217_DEFLS2, + TPS65217_LDO_VOLTAGE_OUT_3_3, + TPS65217_LDO_MASK)) + puts("tps65217_reg_write failure\n"); + + /* Set MPU Frequency to what we detected now that voltages are set */ + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); +} + +const struct dpll_params *get_dpll_ddr_params(void) +{ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); + + return &dpll_ddr_sl50; +} + +void set_uart_mux_conf(void) +{ +#if CONFIG_CONS_INDEX == 1 + enable_uart0_pin_mux(); +#elif CONFIG_CONS_INDEX == 2 + enable_uart1_pin_mux(); +#elif CONFIG_CONS_INDEX == 3 + enable_uart2_pin_mux(); +#elif CONFIG_CONS_INDEX == 4 + enable_uart3_pin_mux(); +#elif CONFIG_CONS_INDEX == 5 + enable_uart4_pin_mux(); +#elif CONFIG_CONS_INDEX == 6 + enable_uart5_pin_mux(); +#endif +} + +void set_mux_conf_regs(void) +{ + enable_board_pin_mux(); +} + +const struct ctrl_ioregs ioregs_evmsk = { + .cm0ioctl = MT41J128MJT125_IOCTRL_VALUE, + .cm1ioctl = MT41J128MJT125_IOCTRL_VALUE, + .cm2ioctl = MT41J128MJT125_IOCTRL_VALUE, + .dt0ioctl = MT41J128MJT125_IOCTRL_VALUE, + .dt1ioctl = MT41J128MJT125_IOCTRL_VALUE, +}; + +const struct ctrl_ioregs ioregs_bonelt = { + .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, +}; + +const struct ctrl_ioregs ioregs_evm15 = { + .cm0ioctl = MT41J512M8RH125_IOCTRL_VALUE, + .cm1ioctl = MT41J512M8RH125_IOCTRL_VALUE, + .cm2ioctl = MT41J512M8RH125_IOCTRL_VALUE, + .dt0ioctl = MT41J512M8RH125_IOCTRL_VALUE, + .dt1ioctl = MT41J512M8RH125_IOCTRL_VALUE, +}; + +const struct ctrl_ioregs ioregs = { + .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, +}; + +void sdram_init(void) +{ + config_ddr(400, &ioregs_bonelt, + &ddr3_sl50_data, + &ddr3_sl50_cmd_ctrl_data, + &ddr3_sl50_emif_reg_data, 0); +} +#endif + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ +#if defined(CONFIG_HW_WATCHDOG) + hw_watchdog_init(); +#endif + + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + return 0; +} + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + return 0; +} +#endif + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_addr = 0, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_addr = 1, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; +#endif + +/* + * This function will: + * Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr + * in the environment + * Perform fixups to the PHY present on certain boards. We only need this + * function in: + * - SPL with either CPSW or USB ethernet support + * - Full U-Boot, with either CPSW or USB ethernet + * Build in only these cases to avoid warnings about unused variables + * when we build an SPL that has neither option but full U-Boot will. + */ +#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \ + && defined(CONFIG_SPL_BUILD)) || \ + ((defined(CONFIG_DRIVER_TI_CPSW) || \ + defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \ + !defined(CONFIG_SPL_BUILD)) +int board_eth_init(bd_t *bis) +{ + int rv, n = 0; + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + if (!getenv("ethaddr")) { + printf("<ethaddr> not set. Validating first E-fuse MAC\n"); + + if (is_valid_ethaddr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + } + +#ifdef CONFIG_DRIVER_TI_CPSW + + mac_lo = readl(&cdev->macid1l); + mac_hi = readl(&cdev->macid1h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (!getenv("eth1addr")) { + if (is_valid_ethaddr(mac_addr)) + eth_setenv_enetaddr("eth1addr", mac_addr); + } + + + writel(MII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = + PHY_INTERFACE_MODE_MII; + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; +#endif + + /* + * + * CPSW RGMII Internal Delay Mode is not supported in all PVT + * operating points. So we must set the TX clock delay feature + * in the AR8051 PHY. Since we only support a single ethernet + * device in U-Boot, we only do this for the first instance. + */ +#define AR8051_PHY_DEBUG_ADDR_REG 0x1d +#define AR8051_PHY_DEBUG_DATA_REG 0x1e +#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5 +#define AR8051_RGMII_TX_CLK_DLY 0x100 + +#endif +#if defined(CONFIG_USB_ETHER) && \ + (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("usbnet_devaddr", mac_addr); + + rv = usb_eth_initialize(bis); + if (rv < 0) + printf("Error %d registering USB_ETHER\n", rv); + else + n += rv; +#endif + return n; +} +#endif diff --git a/board/tcl/sl50/board.h b/board/tcl/sl50/board.h new file mode 100644 index 0000000000..ae2ef6bfd9 --- /dev/null +++ b/board/tcl/sl50/board.h @@ -0,0 +1,22 @@ +/* + * board.h + * + * TCL SL50 boards information header + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +void enable_uart0_pin_mux(void); +void enable_uart1_pin_mux(void); +void enable_uart2_pin_mux(void); +void enable_uart3_pin_mux(void); +void enable_uart4_pin_mux(void); +void enable_uart5_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/tcl/sl50/mux.c b/board/tcl/sl50/mux.c new file mode 100644 index 0000000000..e0d76ef695 --- /dev/null +++ b/board/tcl/sl50/mux.c @@ -0,0 +1,154 @@ +/* + * mux.c + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> +#include "board.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ + {-1}, +}; + +static struct module_pin_mux uart1_pin_mux[] = { + {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */ + {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */ + {-1}, +}; + +static struct module_pin_mux uart2_pin_mux[] = { + {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */ + {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */ + {-1}, +}; + +static struct module_pin_mux uart3_pin_mux[] = { + {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ + {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */ + {-1}, +}; + +static struct module_pin_mux uart4_pin_mux[] = { + {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */ + {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */ + {-1}, +}; + +static struct module_pin_mux uart5_pin_mux[] = { + {OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */ + {OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */ + {-1}, +}; + +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ + {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ + {-1}, +}; + +static struct module_pin_mux mmc1_pin_mux[] = { + {OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */ + {OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */ + {OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */ + {OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT0 */ + {OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */ + {OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */ + {OFFSET(gpmc_csn0), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_WP */ + {OFFSET(gpmc_advn_ale), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_CD */ + {-1}, +}; + +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ + {-1}, +}; + +static struct module_pin_mux i2c1_pin_mux[] = { + {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ + {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ + {-1}, +}; + +static struct module_pin_mux mii1_pin_mux[] = { + {OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */ + {OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */ + {OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */ + {OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */ + {OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */ + {OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */ + {OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */ + {OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */ + {OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */ + {OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */ + {OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */ + {OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */ + {OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_uart1_pin_mux(void) +{ + configure_module_pin_mux(uart1_pin_mux); +} + +void enable_uart2_pin_mux(void) +{ + configure_module_pin_mux(uart2_pin_mux); +} + +void enable_uart3_pin_mux(void) +{ + configure_module_pin_mux(uart3_pin_mux); +} + +void enable_uart4_pin_mux(void) +{ + configure_module_pin_mux(uart4_pin_mux); +} + +void enable_uart5_pin_mux(void) +{ + configure_module_pin_mux(uart5_pin_mux); +} + +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_board_pin_mux(void) +{ + configure_module_pin_mux(i2c1_pin_mux); + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + configure_module_pin_mux(mmc1_pin_mux); +} diff --git a/board/ti/sdp3430/Kconfig b/board/ti/sdp3430/Kconfig deleted file mode 100644 index 7e73d99aba..0000000000 --- a/board/ti/sdp3430/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OMAP3_SDP3430 - -config SYS_BOARD - default "sdp3430" - -config SYS_VENDOR - default "ti" - -config SYS_CONFIG_NAME - default "omap3_sdp3430" - -endif diff --git a/board/ti/sdp3430/MAINTAINERS b/board/ti/sdp3430/MAINTAINERS deleted file mode 100644 index 943c196d9f..0000000000 --- a/board/ti/sdp3430/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SDP3430 BOARD -M: Nishanth Menon <nm@ti.com> -S: Maintained -F: board/ti/sdp3430/ -F: include/configs/omap3_sdp3430.h -F: configs/omap3_sdp3430_defconfig diff --git a/board/ti/sdp3430/Makefile b/board/ti/sdp3430/Makefile deleted file mode 100644 index 753f09979c..0000000000 --- a/board/ti/sdp3430/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := sdp.o diff --git a/board/ti/sdp3430/config.mk b/board/ti/sdp3430/config.mk deleted file mode 100644 index e4d9be13e3..0000000000 --- a/board/ti/sdp3430/config.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# (C) Copyright 2006-2009 -# Texas Instruments Incorporated, <www.ti.com> -# -# OMAP 3430 SDP uses OMAP3 (ARM-CortexA8) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Physical Address: -# 8000'0000 (bank0) -# A000/0000 (bank1) -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) - -# For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x80008000 diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c deleted file mode 100644 index 7171363e76..0000000000 --- a/board/ti/sdp3430/sdp.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * (C) Copyright 2004-2009 - * Texas Instruments Incorporated, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <netdev.h> -#include <twl4030.h> -#include <asm/io.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/mem.h> -#include <asm/arch/sys_proto.h> -#include <asm/mach-types.h> -#include "sdp.h" - -DECLARE_GLOBAL_DATA_PTR; - -const omap3_sysinfo sysinfo = { - DDR_DISCRETE, - "OMAP3 SDP3430 board", -#if defined(CONFIG_ENV_IS_IN_ONENAND) - "OneNAND", -#elif defined(CONFIG_ENV_IS_IN_NAND) - "NAND", -#else - "NOR", -#endif -}; - -/* Timing definitions for GPMC controller for Sibley NOR */ -static const u32 gpmc_sdp_nor[] = { - SDP3430_NOR_GPMC_CONF1, - SDP3430_NOR_GPMC_CONF2, - SDP3430_NOR_GPMC_CONF3, - SDP3430_NOR_GPMC_CONF4, - SDP3430_NOR_GPMC_CONF5, - SDP3430_NOR_GPMC_CONF6, - /*CONF7- computed as params */ -}; - -/* - * Timing definitions for GPMC controller for Debug Board - * Debug board contains access to ethernet and DIP Switch setting - * information etc. - */ -static const u32 gpmc_sdp_debug[] = { - SDP3430_DEBUG_GPMC_CONF1, - SDP3430_DEBUG_GPMC_CONF2, - SDP3430_DEBUG_GPMC_CONF3, - SDP3430_DEBUG_GPMC_CONF4, - SDP3430_DEBUG_GPMC_CONF5, - SDP3430_DEBUG_GPMC_CONF6, - /*CONF7- computed as params */ -}; - -/* Timing defintions for GPMC OneNAND */ -static const u32 gpmc_sdp_onenand[] = { - SDP3430_ONENAND_GPMC_CONF1, - SDP3430_ONENAND_GPMC_CONF2, - SDP3430_ONENAND_GPMC_CONF3, - SDP3430_ONENAND_GPMC_CONF4, - SDP3430_ONENAND_GPMC_CONF5, - SDP3430_ONENAND_GPMC_CONF6, - /*CONF7- computed as params */ -}; - -/* GPMC definitions for GPMC NAND */ -static const u32 gpmc_sdp_nand[] = { - SDP3430_NAND_GPMC_CONF1, - SDP3430_NAND_GPMC_CONF2, - SDP3430_NAND_GPMC_CONF3, - SDP3430_NAND_GPMC_CONF4, - SDP3430_NAND_GPMC_CONF5, - SDP3430_NAND_GPMC_CONF6, - /*CONF7- computed as params */ -}; - -/* gpmc_cfg is initialized by gpmc_init and we use it here */ -extern struct gpmc *gpmc_cfg; - -/** - * @brief board_init - gpmc and basic setup as phase1 of boot sequence - * - * @return 0 - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* TODO: Dynamically pop out CS mapping and program accordingly */ - /* Configure devices for default ON ON ON settings */ - enable_gpmc_cs_config(gpmc_sdp_nor, &gpmc_cfg->cs[0], - CONFIG_SYS_FLASH_BASE, GPMC_SIZE_128M); - enable_gpmc_cs_config(gpmc_sdp_nand, &gpmc_cfg->cs[1], 0x28000000, - GPMC_SIZE_16M); - enable_gpmc_cs_config(gpmc_sdp_onenand, &gpmc_cfg->cs[2], 0x20000000, - GPMC_SIZE_16M); - enable_gpmc_cs_config(gpmc_sdp_debug, &gpmc_cfg->cs[3], DEBUG_BASE, - GPMC_SIZE_16M); - /* board id for Linux */ - gd->bd->bi_arch_number = MACH_TYPE_OMAP_3430SDP; - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -#define LAN_RESET_REGISTER (CONFIG_LAN91C96_BASE + 0x01c) -#define ETH_CONTROL_REG (CONFIG_LAN91C96_BASE + 0x30b) - -/** - * @brief board_eth_init Take the Ethernet controller out of reset and wait - * for the EEPROM load to complete. - */ -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_LAN91C96 - int cnt = 20; - - writew(0x0, LAN_RESET_REGISTER); - do { - writew(0x1, LAN_RESET_REGISTER); - udelay(100); - if (cnt == 0) - goto reset_err_out; - --cnt; - } while (readw(LAN_RESET_REGISTER) != 0x1); - - cnt = 20; - - do { - writew(0x0, LAN_RESET_REGISTER); - udelay(100); - if (cnt == 0) - goto reset_err_out; - --cnt; - } while (readw(LAN_RESET_REGISTER) != 0x0000); - udelay(1000); - - writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG); - udelay(1000); - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); -reset_err_out: - -#endif - return rc; -} - -/** - * @brief misc_init_r - Configure SDP board specific configurations - * such as power configurations, ethernet initialization as phase2 of - * boot sequence - * - * @return 0 - */ -int misc_init_r(void) -{ - /* Partial setup: - * VAUX3 - 2.8V for DVI - * VPLL1 - 1.8V - * VDAC - 1.8V - * and turns on LEDA/LEDB (not needed ... NOP?) - */ - twl4030_power_init(); - - /* FIXME finish setup: - * VAUX1 - 2.8V for mainboard I/O - * VAUX2 - 2.8V for camera - * VAUX4 - 1.8V for OMAP3 CSI - * VMMC1 - 3.15V (init, variable) for MMC1 - * VMMC2 - 1.85V for MMC2 - * VSIM - off (init, variable) for MMC1.DAT[3..7], SIM - * VPLL2 - 1.8V - */ - - return 0; -} - -/** - * @brief set_muxconf_regs Setting up the configuration Mux registers - * specific to the hardware. Many pins need to be moved from protect - * to primary mode. - */ -void set_muxconf_regs(void) -{ - /* platform specific muxes */ - MUX_SDP3430(); -} - -#ifdef CONFIG_GENERIC_MMC -int board_mmc_init(bd_t *bis) -{ - return omap_mmc_init(0, 0, 0, -1, -1); -} - -void board_mmc_power_init(void) -{ - twl4030_power_mmc_init(0); -} -#endif diff --git a/board/ti/sdp3430/sdp.h b/board/ti/sdp3430/sdp.h deleted file mode 100644 index 0e631897e3..0000000000 --- a/board/ti/sdp3430/sdp.h +++ /dev/null @@ -1,401 +0,0 @@ -/* - * (C) Copyright 2004-2009 - * Texas Instruments Incorporated - * Richard Woodruff <r-woodruff2@ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef _BOARD_SDP_H_ -#define _BOARD_SDP_H_ - -#define OFF_IN_PD 0 -#define OFF_OUT_PD 0 - -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_SDP3430()\ - /*SDRC*/\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))\ - /*GPMC*/\ - MUX_VAL(CP(GPMC_A1), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_A2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_A3), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_A4), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_A5), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_A6), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_A7), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_A8), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_A9), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_A10), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D0), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D1), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D3), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D4), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D5), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D6), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D7), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D8), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D9), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D10), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D11), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D12), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D13), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D14), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_D15), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_NCS0), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ - MUX_VAL(CP(GPMC_NCS1), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ - MUX_VAL(CP(GPMC_NCS2), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ - MUX_VAL(CP(GPMC_NCS3), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ - MUX_VAL(CP(GPMC_NCS4), (OFF_IN_PD | IEN | PTU | EN | M4)) /*G55-F_DIS*/\ - MUX_VAL(CP(GPMC_NCS5), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G56T_EN*/\ - MUX_VAL(CP(GPMC_NCS6), (OFF_IN_PD | IEN | PTD | DIS | M4))/*G57-AGPSP*/\ - MUX_VAL(CP(GPMC_NCS7), (OFF_IN_PD | IEN | PTU | EN | M4))/*G58-WLNIQ*/\ - MUX_VAL(CP(GPMC_CLK), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_NADV_ALE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_NOE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_NWE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_NBE0_CLE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_NBE1), (OFF_IN_PD | IEN | PTD | DIS | M4)) /*G61-BTST*/\ - MUX_VAL(CP(GPMC_NWP), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(GPMC_WAIT0), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(GPMC_WAIT1), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(GPMC_WAIT2), (OFF_IN_PD | IEN | PTU | EN | M4)) /*GPIO_64*/\ - MUX_VAL(CP(GPMC_WAIT3), (OFF_IN_PD | IEN | PTU | EN | M4)) /*GPIO_65*/\ - /*DSS*/\ - MUX_VAL(CP(DSS_PCLK), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_HSYNC), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_VSYNC), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_ACBIAS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA0), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA1), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA3), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA4), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA5), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA6), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA7), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA8), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA9), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA10), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA11), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA12), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA13), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA14), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA15), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA16), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA17), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA18), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA19), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA20), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA21), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA22), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA23), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - /*CAMERA*/\ - MUX_VAL(CP(CAM_HS), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(CAM_VS), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(CAM_XCLKA), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_PCLK), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(CAM_FLD), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G98-C_RST*/\ - MUX_VAL(CP(CAM_D0), (OFF_IN_PD | IEN | PTD | DIS | M2)) /*CAM_D0 */\ - MUX_VAL(CP(CAM_D1), (OFF_IN_PD | IEN | PTD | DIS | M2)) /*CAM_D1 */\ - MUX_VAL(CP(CAM_D2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_D3), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_D4), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_D5), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_D6), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_D7), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_D8), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_D9), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_D10), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_D11), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_XCLKB), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(CAM_WEN), (OFF_IN_PD | IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(CAM_STROBE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(CSI2_DX0), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CSI2_DY0), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CSI2_DX1), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(CSI2_DY1), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - /*Audio InterfACe */\ - MUX_VAL(CP(MCBSP2_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCBSP2_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCBSP2_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCBSP2_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - /*Expansion Card */\ - MUX_VAL(CP(MMC1_CLK), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ - MUX_VAL(CP(MMC1_CMD), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC1_DAT0), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC1_DAT1), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC1_DAT2), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC1_DAT3), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC1_DAT4), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC1_DAT5), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC1_DAT6), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC1_DAT7), (OFF_IN_PD | IEN | PTU | EN | M0))\ - /*Wireless LAN */\ - MUX_VAL(CP(MMC2_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MMC2_CMD), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC2_DAT0), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC2_DAT1), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC2_DAT2), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC2_DAT3), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MMC2_DAT4), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DRD0*/\ - MUX_VAL(CP(MMC2_DAT5), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DRD1*/\ - MUX_VAL(CP(MMC2_DAT6), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DCMD*/\ - MUX_VAL(CP(MMC2_DAT7), (OFF_IN_PD | IEN | PTU | EN | M1))/*CLKIN*/\ - /*Bluetooth*/\ - MUX_VAL(CP(MCBSP3_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(MCBSP3_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCBSP3_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCBSP3_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(UART2_CTS), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(UART2_RTS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(UART2_TX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(UART2_RX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - /*Modem Interface */\ - MUX_VAL(CP(UART1_TX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(UART1_RTS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(UART1_CTS), (OFF_IN_PD | IEN | PTU | DIS | M0))\ - MUX_VAL(CP(UART1_RX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCBSP4_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1DRX*/\ - MUX_VAL(CP(MCBSP4_DR), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1FLGRX*/\ - MUX_VAL(CP(MCBSP4_DX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1RDYRX*/\ - MUX_VAL(CP(MCBSP4_FSX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1WAKE*/\ - MUX_VAL(CP(MCBSP1_CLKR), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCBSP1_FSR), (OFF_OUT_PD | IDIS | PTU | EN | M4))/*G157BWP*/\ - MUX_VAL(CP(MCBSP1_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(MCBSP1_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCBSP_CLKS), (OFF_IN_PD | IEN | PTU | DIS | M0))\ - MUX_VAL(CP(MCBSP1_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCBSP1_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - /*Serial Interface*/\ - MUX_VAL(CP(UART3_CTS_RCTX), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(UART3_RTS_SD), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(UART3_RX_IRRX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(UART3_TX_IRTX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(HSUSB0_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(HSUSB0_STP), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ - MUX_VAL(CP(HSUSB0_DIR), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(HSUSB0_NXT), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(HSUSB0_DATA0), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(HSUSB0_DATA1), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(HSUSB0_DATA2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(HSUSB0_DATA3), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(HSUSB0_DATA4), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(HSUSB0_DATA5), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(HSUSB0_DATA6), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(HSUSB0_DATA7), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - /* NOTE db: removed off-mode from I2C 1/2/3 ... external pullups!! */\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0))\ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0))\ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0))\ - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0))\ - MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0))\ - MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0))\ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0))\ - MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0))\ - MUX_VAL(CP(HDQ_SIO), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(MCSPI1_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCSPI1_SIMO), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCSPI1_SOMI), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCSPI1_CS0), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(MCSPI1_CS1), (OFF_OUT_PD | IDIS | PTD | EN | M0))\ - MUX_VAL(CP(MCSPI1_CS2), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G176*/\ - MUX_VAL(CP(MCSPI1_CS3), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(MCSPI2_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCSPI2_SIMO), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCSPI2_SOMI), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(MCSPI2_CS0), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(MCSPI2_CS1), (OFF_IN_PD | IEN | PTD | EN | M0))\ - /*Control and debug */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SYS_NIRQ), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(SYS_BOOT0), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G2PENIRQ*/\ - MUX_VAL(CP(SYS_BOOT1), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*GPIO_3 */\ - MUX_VAL(CP(SYS_BOOT2), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G4MMC1WP*/\ - MUX_VAL(CP(SYS_BOOT3), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G5LCDENV*/\ - MUX_VAL(CP(SYS_BOOT4), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G6LANINT*/\ - MUX_VAL(CP(SYS_BOOT5), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G7MMC2WP*/\ - MUX_VAL(CP(SYS_BOOT6), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G8ENBKL*/\ - MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SYS_CLKOUT2), (OFF_IN_PD | IEN | PTU | EN | M4))/*GPIO_186*/\ - MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0))\ - MUX_VAL(CP(JTAG_EMU0), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(JTAG_EMU1), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_CLK_ES2), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ - MUX_VAL(CP(ETK_CTL_ES2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D0_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*USB1TLD0*/\ - MUX_VAL(CP(ETK_D1_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SPI3_CS0*/\ - MUX_VAL(CP(ETK_D2_ES2), (OFF_IN_PD | IEN | PTD | EN | M1))/*USB1TLD2*/\ - MUX_VAL(CP(ETK_D3_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*USB1TLD7*/\ - MUX_VAL(CP(ETK_D4_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D5_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D6_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D7_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D8_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D9_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D10_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D11_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D12_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D13_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D14_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(ETK_D15_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - /*Die to Die */\ - MUX_VAL(CP(D2D_MCAD0), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD1), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD2), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD3), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD4), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD5), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD6), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD7), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD8), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD9), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD10), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD11), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD12), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD13), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD14), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD15), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD16), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD17), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD18), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD19), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD20), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD21), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD22), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD23), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD24), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD25), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD26), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD27), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD28), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD29), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD30), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD31), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD32), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD33), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD34), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD35), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_MCAD36), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_CLK26MI), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_NRESPWRON), (OFF_OUT_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_NRESWARM), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(D2D_ARM9NIRQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_UMA2P6FIQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_SPINT), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_FRINT), (OFF_IN_PD | IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_DMAREQ0), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_DMAREQ1), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_DMAREQ2), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_DMAREQ3), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_N3GTRST), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_N3GTDI), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_N3GTDO), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_N3GTMS), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_N3GTCK), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_N3GRTCK), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_MSTDBY), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0))\ - MUX_VAL(CP(D2D_IDLEREQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_IDLEACK), (OFF_IN_PD | IEN | PTU | EN | M0))\ - MUX_VAL(CP(D2D_MWRITE), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_SWRITE), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_MREAD), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_SREAD), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_MBUSFLAG), (OFF_IN_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(D2D_SBUSFLAG), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*SDRC_CKE1 NOT USED*/ - -/* - * GPMC Timing definitions for SDP3430 - * at L3 = 166Mhz - */ - -/* Timing definitions for GPMC controller for Sibley NOR */ -#define SDP3430_NOR_GPMC_CONF1 0x00001200 -#define SDP3430_NOR_GPMC_CONF2 0x001F1F00 -#define SDP3430_NOR_GPMC_CONF3 0x00080802 -#define SDP3430_NOR_GPMC_CONF4 0x1C091C09 -#define SDP3430_NOR_GPMC_CONF5 0x01131F1F -#define SDP3430_NOR_GPMC_CONF6 0x1F0F03C2 - -/* - * Timing definitions for GPMC controller for Debug Board - * Debug board contains access to ethernet and DIP Switch setting - * information etc. - */ -#define SDP3430_DEBUG_GPMC_CONF1 0x00611200 -#define SDP3430_DEBUG_GPMC_CONF2 0x001F1F01 -#define SDP3430_DEBUG_GPMC_CONF3 0x00080803 -#define SDP3430_DEBUG_GPMC_CONF4 0x1D091D09 -#define SDP3430_DEBUG_GPMC_CONF5 0x041D1F1F -#define SDP3430_DEBUG_GPMC_CONF6 0x1D0904C4 - -/* Timing defintions for GPMC OneNAND */ -#define SDP3430_ONENAND_GPMC_CONF1 0x00001200 -#define SDP3430_ONENAND_GPMC_CONF2 0x000F0F01 -#define SDP3430_ONENAND_GPMC_CONF3 0x00030301 -#define SDP3430_ONENAND_GPMC_CONF4 0x0F040F04 -#define SDP3430_ONENAND_GPMC_CONF5 0x010F1010 -#define SDP3430_ONENAND_GPMC_CONF6 0x1F060000 - -/* GPMC definitions for GPMC NAND */ -#define SDP3430_NAND_GPMC_CONF1 0x00000800 -#define SDP3430_NAND_GPMC_CONF2 0x00141400 -#define SDP3430_NAND_GPMC_CONF3 0x00141400 -#define SDP3430_NAND_GPMC_CONF4 0x0F010F01 -#define SDP3430_NAND_GPMC_CONF5 0x010C1414 -#define SDP3430_NAND_GPMC_CONF6 0x1F040A80 - -#endif /* _BOARD_SDP_H_ */ diff --git a/board/ti/ti814x/MAINTAINERS b/board/ti/ti814x/MAINTAINERS index e39b253d25..b2ee39e8a3 100644 --- a/board/ti/ti814x/MAINTAINERS +++ b/board/ti/ti814x/MAINTAINERS @@ -1,5 +1,5 @@ TI814X BOARD -M: Matt Porter <matt.porter@linaro.org> +M: Tom Rini <trini@konsulko.com> S: Maintained F: board/ti/ti814x/ F: include/configs/ti814x_evm.h diff --git a/board/ti/ti816x/MAINTAINERS b/board/ti/ti816x/MAINTAINERS index d3de144bc2..fd9a98fc76 100644 --- a/board/ti/ti816x/MAINTAINERS +++ b/board/ti/ti816x/MAINTAINERS @@ -1,5 +1,5 @@ TI816X BOARD -#M: - +M: Tom Rini <trini@konsulko.com> S: Maintained F: board/ti/ti816x/ F: include/configs/ti816x_evm.h diff --git a/board/timll/devkit3250/devkit3250.c b/board/timll/devkit3250/devkit3250.c index 4b3c94eaf7..386d0cde8f 100644 --- a/board/timll/devkit3250/devkit3250.c +++ b/board/timll/devkit3250/devkit3250.c @@ -62,7 +62,7 @@ int board_init(void) /* Change the NOR timings to optimum value to get maximum bandwidth */ emc->stat[0].waitwen = EMC_STAT_WAITWEN(1); - emc->stat[0].waitoen = EMC_STAT_WAITOEN(1); + emc->stat[0].waitoen = EMC_STAT_WAITOEN(0); emc->stat[0].waitrd = EMC_STAT_WAITRD(12); emc->stat[0].waitpage = EMC_STAT_WAITPAGE(12); emc->stat[0].waitwr = EMC_STAT_WAITWR(5); diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c index 8618fd068c..39bf0ac7d6 100644 --- a/board/toradex/colibri_vf/colibri_vf.c +++ b/board/toradex/colibri_vf/colibri_vf.c @@ -35,6 +35,61 @@ DECLARE_GLOBAL_DATA_PTR; #define USB_PEN_GPIO 83 +static struct ddrmc_cr_setting colibri_vf_cr_settings[] = { + /* levelling */ + { DDRMC_CR97_WRLVL_EN, 97 }, + { DDRMC_CR98_WRLVL_DL_0(0), 98 }, + { DDRMC_CR99_WRLVL_DL_1(0), 99 }, + { DDRMC_CR102_RDLVL_REG_EN | DDRMC_CR102_RDLVL_GT_REGEN, 102 }, + { DDRMC_CR105_RDLVL_DL_0(0), 105 }, + { DDRMC_CR106_RDLVL_GTDL_0(4), 106 }, + { DDRMC_CR110_RDLVL_DL_1(0) | DDRMC_CR110_RDLVL_GTDL_1(4), 110 }, + /* AXI */ + { DDRMC_CR117_AXI0_W_PRI(0) | DDRMC_CR117_AXI0_R_PRI(0), 117 }, + { DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 }, + { DDRMC_CR120_AXI0_PRI1_RPRI(2) | + DDRMC_CR120_AXI0_PRI0_RPRI(2), 120 }, + { DDRMC_CR121_AXI0_PRI3_RPRI(2) | + DDRMC_CR121_AXI0_PRI2_RPRI(2), 121 }, + { DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) | + DDRMC_CR122_AXI0_PRIRLX(100), 122 }, + { DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) | + DDRMC_CR123_AXI1_PRI2_RPRI(1), 123 }, + { DDRMC_CR124_AXI1_PRIRLX(100), 124 }, + { DDRMC_CR126_PHY_RDLAT(8), 126 }, + { DDRMC_CR132_WRLAT_ADJ(5) | + DDRMC_CR132_RDLAT_ADJ(6), 132 }, + { DDRMC_CR137_PHYCTL_DL(2), 137 }, + { DDRMC_CR138_PHY_WRLV_MXDL(256) | + DDRMC_CR138_PHYDRAM_CK_EN(1), 138 }, + { DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) | + DDRMC_CR139_PHY_WRLV_DLL(3) | + DDRMC_CR139_PHY_WRLV_EN(3), 139 }, + { DDRMC_CR140_PHY_WRLV_WW(64), 140 }, + { DDRMC_CR143_RDLV_GAT_MXDL(1536) | + DDRMC_CR143_RDLV_MXDL(128), 143 }, + { DDRMC_CR144_PHY_RDLVL_RES(4) | DDRMC_CR144_PHY_RDLV_LOAD(7) | + DDRMC_CR144_PHY_RDLV_DLL(3) | + DDRMC_CR144_PHY_RDLV_EN(3), 144 }, + { DDRMC_CR145_PHY_RDLV_RR(64), 145 }, + { DDRMC_CR146_PHY_RDLVL_RESP(64), 146 }, + { DDRMC_CR147_RDLV_RESP_MASK(983040), 147 }, + { DDRMC_CR148_RDLV_GATE_RESP_MASK(983040), 148 }, + { DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(1) | + DDRMC_CR151_RDLVL_DQ_ZERO_CNT(1), 151 }, + + { DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) | + DDRMC_CR154_PAD_ZQ_MODE(1) | + DDRMC_CR154_DDR_SEL_PAD_CONTR(3) | + DDRMC_CR154_PAD_ZQ_HW_FOR(1), 154 }, + { DDRMC_CR155_PAD_ODT_BYTE1(1) | DDRMC_CR155_PAD_ODT_BYTE0(1), 155 }, + { DDRMC_CR158_TWR(6), 158 }, + { DDRMC_CR161_ODT_EN(1) | DDRMC_CR161_TODTH_RD(2) | + DDRMC_CR161_TODTH_WR(2), 161 }, + /* end marker */ + { 0, -1 } +}; + static const iomux_v3_cfg_t usb_pads[] = { VF610_PAD_PTD4__GPIO_83, }; @@ -42,48 +97,59 @@ static const iomux_v3_cfg_t usb_pads[] = { int dram_init(void) { static const struct ddr3_jedec_timings timings = { - .tinit = 5, - .trst_pwron = 80000, - .cke_inactive = 200000, - .wrlat = 5, - .caslat_lin = 12, - .trc = 21, - .trrd = 4, - .tccd = 4, - .tfaw = 20, - .trp = 6, - .twtr = 4, - .tras_min = 15, - .tmrd = 4, - .trtp = 4, - .tras_max = 28080, - .tmod = 12, - .tckesr = 4, - .tcke = 3, - .trcd_int = 6, - .tdal = 12, - .tdll = 512, - .trp_ab = 6, - .tref = 3120, - .trfc = 64, - .tpdex = 3, - .txpdll = 10, - .txsnr = 48, - .txsr = 468, - .cksrx = 5, - .cksre = 5, - .zqcl = 256, - .zqinit = 512, - .zqcs = 64, - .ref_per_zq = 64, - .aprebit = 10, - .wlmrd = 40, - .wldqsen = 25, + .tinit = 5, + .trst_pwron = 80000, + .cke_inactive = 200000, + .wrlat = 5, + .caslat_lin = 12, + .trc = 21, + .trrd = 4, + .tccd = 4, + .tbst_int_interval = 0, + .tfaw = 20, + .trp = 6, + .twtr = 4, + .tras_min = 15, + .tmrd = 4, + .trtp = 4, + .tras_max = 28080, + .tmod = 12, + .tckesr = 4, + .tcke = 3, + .trcd_int = 6, + .tras_lockout = 0, + .tdal = 12, + .bstlen = 0, + .tdll = 512, + .trp_ab = 6, + .tref = 3120, + .trfc = 64, + .tref_int = 0, + .tpdex = 3, + .txpdll = 10, + .txsnr = 48, + .txsr = 468, + .cksrx = 5, + .cksre = 5, + .freq_chg_en = 0, + .zqcl = 256, + .zqinit = 512, + .zqcs = 64, + .ref_per_zq = 64, + .zqcs_rotate = 0, + .aprebit = 10, + .cmd_age_cnt = 64, + .age_cnt = 64, + .q_fullness = 7, + .odt_rd_mapcs0 = 0, + .odt_wr_mapcs0 = 1, + .wlmrd = 40, + .wldqsen = 25, }; - ddrmc_setup_iomux(); + ddrmc_setup_iomux(NULL, 0); - ddrmc_ctrl_init_ddr3(&timings, NULL, 1, 2); + ddrmc_ctrl_init_ddr3(&timings, colibri_vf_cr_settings, NULL, 1, 2); gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; diff --git a/board/tqc/tqma6/Kconfig b/board/tqc/tqma6/Kconfig index dbd87875b5..5dafa3822a 100644 --- a/board/tqc/tqma6/Kconfig +++ b/board/tqc/tqma6/Kconfig @@ -6,9 +6,6 @@ config SYS_BOARD config SYS_VENDOR default "tqc" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "tqma6" diff --git a/board/tqc/tqma6/tqma6_mba6.c b/board/tqc/tqma6/tqma6_mba6.c index 6f4cffd95e..e58b71402b 100644 --- a/board/tqc/tqma6/tqma6_mba6.c +++ b/board/tqc/tqma6/tqma6_mba6.c @@ -309,24 +309,26 @@ int board_eth_init(bd_t *bis) bus = fec_get_miibus(base, -1); if (!bus) - return 0; + return -EINVAL; /* scan phy */ phydev = phy_find_by_mask(bus, (0xf << CONFIG_FEC_MXC_PHYADDR), PHY_INTERFACE_MODE_RGMII); if (!phydev) { - free(bus); - puts("No phy found\n"); - return 0; + ret = -EINVAL; + goto free_bus; } ret = fec_probe(bis, -1, base, bus, phydev); - if (ret) { - puts("FEC MXC: probe failed\n"); - free(phydev); - free(bus); - } + if (ret) + goto free_phydev; return 0; + +free_phydev: + free(phydev); +free_bus: + free(bus); + return ret; } int tqma6_bb_board_early_init_f(void) diff --git a/board/trizepsiv/Kconfig b/board/trizepsiv/Kconfig deleted file mode 100644 index 56b255709a..0000000000 --- a/board/trizepsiv/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_TRIZEPSIV - -config SYS_BOARD - default "trizepsiv" - -config SYS_CONFIG_NAME - default "trizepsiv" - -endif diff --git a/board/trizepsiv/MAINTAINERS b/board/trizepsiv/MAINTAINERS deleted file mode 100644 index ba48c2e2e0..0000000000 --- a/board/trizepsiv/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -TRIZEPSIV BOARD -M: Stefano Babic <sbabic@denx.de> -S: Maintained -F: board/trizepsiv/ -F: include/configs/trizepsiv.h -F: configs/polaris_defconfig -F: configs/trizepsiv_defconfig diff --git a/board/trizepsiv/Makefile b/board/trizepsiv/Makefile deleted file mode 100644 index c49686fc60..0000000000 --- a/board/trizepsiv/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := conxs.o eeprom.o diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c deleted file mode 100644 index 1ddf05dcdd..0000000000 --- a/board/trizepsiv/conxs.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefano Babic, DENX Gmbh, sbabic@denx.de - * - * (C) Copyright 2004 - * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/pxa.h> -#include <asm/arch/regs-mmc.h> -#include <netdev.h> -#include <asm/io.h> -#include <usb.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define RH_A_PSM (1 << 8) /* power switching mode */ -#define RH_A_NPS (1 << 9) /* no power switching */ - -extern struct serial_device serial_ffuart_device; -extern struct serial_device serial_btuart_device; -extern struct serial_device serial_stuart_device; - -#if CONFIG_MK_POLARIS -#define BOOT_CONSOLE "serial_stuart" -#else -#define BOOT_CONSOLE "serial_ffuart" -#endif -/* ------------------------------------------------------------------------- */ - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_usb_init(int index, enum usb_init_type init) -{ - writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE), - UHCHR); - - writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR); - - while (readl(UHCHR) & UHCHR_FSBIR) - ; - - writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR); - writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE); - - /* Clear any OTG Pin Hold */ - if (readl(PSSR) & PSSR_OTGPH) - writel(readl(PSSR) | PSSR_OTGPH, PSSR); - - writel(readl(UHCRHDA) & ~(RH_A_NPS), UHCRHDA); - writel(readl(UHCRHDA) | RH_A_PSM, UHCRHDA); - - /* Set port power control mask bits, only 3 ports. */ - writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB); - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} - -void usb_board_stop(void) -{ - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - udelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCCOMS) | 1, UHCCOMS); - udelay(10); - - writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN); - - return; -} - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of ConXS Board */ - gd->bd->bi_arch_number = 776; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa000003c; - - return 0; -} - -int board_late_init(void) -{ - char *console=getenv("boot_console"); - - if ((console == NULL) || (strcmp(console,"serial_btuart") && - strcmp(console,"serial_stuart") && - strcmp(console,"serial_ffuart"))) { - console = BOOT_CONSOLE; - } - setenv("stdout",console); - setenv("stdin", console); - setenv("stderr",console); - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c deleted file mode 100644 index 1318edc5d6..0000000000 --- a/board/trizepsiv/eeprom.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <dm9000.h> - -static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - unsigned int i; - u8 data[2]; - - for (i=0; i < 0x40; i++) { - if (!(i % 0x10)) - printf("\n%08x:", i); - dm9000_read_srom_word(i, data); - printf(" %02x%02x", data[1], data[0]); - } - printf ("\n"); - return (0); -} - -static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int offset,value; - - if (argc < 4) - return cmd_usage(cmdtp); - - offset=simple_strtoul(argv[2],NULL,16); - value=simple_strtoul(argv[3],NULL,16); - if (offset > 0x40) { - printf("Wrong offset : 0x%x\n",offset); - return cmd_usage(cmdtp); - } - dm9000_write_srom_word(offset, value); - return (0); -} - -int do_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) - return cmd_usage(cmdtp); - - if (strcmp (argv[1],"read") == 0) - return (do_read_dm9000_eeprom(cmdtp,flag,argc,argv)); - else if (strcmp (argv[1],"write") == 0) - return (do_write_dm9000_eeprom(cmdtp,flag,argc,argv)); - else - return cmd_usage(cmdtp); -} - -U_BOOT_CMD( - dm9000ee,4,1,do_dm9000_eeprom, - "Read/Write eeprom connected to Ethernet Controller", - "\ndm9000ee write <word offset> <value> \n" - "\tdm9000ee read \n" - "\tword:\t\t00-02 : MAC Address\n" - "\t\t\t03-07 : DM9000 Configuration\n" - "\t\t\t08-63 : User data" -); diff --git a/board/ttcontrol/vision2/Kconfig b/board/ttcontrol/vision2/Kconfig deleted file mode 100644 index cacd2c5dfe..0000000000 --- a/board/ttcontrol/vision2/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_VISION2 - -config SYS_BOARD - default "vision2" - -config SYS_VENDOR - default "ttcontrol" - -config SYS_SOC - default "mx5" - -config SYS_CONFIG_NAME - default "vision2" - -endif diff --git a/board/ttcontrol/vision2/MAINTAINERS b/board/ttcontrol/vision2/MAINTAINERS deleted file mode 100644 index cfc9903c71..0000000000 --- a/board/ttcontrol/vision2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -VISION2 BOARD -M: Stefano Babic <sbabic@denx.de> -S: Maintained -F: board/ttcontrol/vision2/ -F: include/configs/vision2.h -F: configs/vision2_defconfig diff --git a/board/ttcontrol/vision2/Makefile b/board/ttcontrol/vision2/Makefile deleted file mode 100644 index c3e1e87f3d..0000000000 --- a/board/ttcontrol/vision2/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> -# -# (C) Copyright 2009 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := vision2.o diff --git a/board/ttcontrol/vision2/imximage_hynix.cfg b/board/ttcontrol/vision2/imximage_hynix.cfg deleted file mode 100644 index c74973edec..0000000000 --- a/board/ttcontrol/vision2/imximage_hynix.cfg +++ /dev/null @@ -1,212 +0,0 @@ -/* - * (C) Copyright 2009 - * Stefano Babic DENX Software Engineering sbabic@denx.de. - * - * (C) Copyright 2010 - * Klaus Steinhammer TTECH Control Gmbh kst@tttech.com - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* - * Boot Device : one of - * spi, nand, onenand, sd - */ -BOOT_FROM spi - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ - -/* - * ####################### - * ### Disable WDOG ### - * ####################### - */ -DATA 2 0x73f98000 0x30 - -/* - * ####################### - * ### SET DDR Clk ### - * ####################### - */ -/* CCM: CBMCR - ddr_clk_sel: axi_b (133MHz) */ -DATA 4 0x73FD4018 0x000024C0 - -/* DOUBLE SPI CLK (13MHz->26 MHz Clock) */ -DATA 4 0x73FD4038 0x2010241 - -/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST */ -DATA 4 0x73fa8600 0x00000107 -/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST */ -DATA 4 0x73fa8604 0x00000107 -/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */ -DATA 4 0x73fa8608 0x00000187 -/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */ -DATA 4 0x73fa860c 0x00000187 -/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST */ -DATA 4 0x73fa8614 0x00000107 -/* IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2) */ -DATA 4 0x73fa86a8 0x00000187 - -/* - * ####################### - * ### Settings IOMUXC ### - * ####################### - */ -/* - * DDR IOMUX configuration - * Control, Data, Address pads are in their default state: HIGH DS, FAST SR. - * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS - */ -DATA 4 0x73fa84b8 0x000000e7 -/* PVTC MAX (at GPC, PGR reg) */ -/* DATA 4 0x73FD8004 0x1fc00000 */ - -/* DQM0 DS high slew rate slow */ -DATA 4 0x73fa84d4 0x000000e4 -/* DQM1 DS high slew rate slow */ -DATA 4 0x73fa84d8 0x000000e4 -/* DQM2 DS high slew rate slow */ -DATA 4 0x73fa84dc 0x000000e4 -/* DQM3 DS high slew rate slow */ -DATA 4 0x73fa84e0 0x000000e4 - -/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow */ -DATA 4 0x73fa84bc 0x000000c4 -/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow */ -DATA 4 0x73fa84c0 0x000000c4 -/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow */ -DATA 4 0x73fa84c4 0x000000c4 -/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow */ -DATA 4 0x73fa84c8 0x000000c4 - -/* DRAM_DATA B0 */ -DATA 4 0x73fa88a4 0x00000004 -/* DRAM_DATA B1 */ -DATA 4 0x73fa88ac 0x00000004 -/* DRAM_DATA B2 */ -DATA 4 0x73fa88b8 0x00000004 -/* DRAM_DATA B3 */ -DATA 4 0x73fa882c 0x00000004 - -/* DRAM_DATA B0 slew rate */ -DATA 4 0x73fa8878 0x00000000 -/* DRAM_DATA B1 slew rate */ -DATA 4 0x73fa8880 0x00000000 -/* DRAM_DATA B2 slew rate */ -DATA 4 0x73fa888c 0x00000000 -/* DRAM_DATA B3 slew rate */ -DATA 4 0x73fa889c 0x00000000 - -/* - * ####################### - * ### Configure SDRAM ### - * ####################### - */ - -/* Configure CS0 */ -/* ####################### */ - -/* ESDCTL0: Enable controller */ -DATA 4 0x83fd9000 0x83220000 - -/* Init DRAM on CS0 */ -/* ESDSCR: Precharge command */ -DATA 4 0x83fd9014 0x04008008 -/* ESDSCR: Refresh command */ -DATA 4 0x83fd9014 0x00008010 -/* ESDSCR: Refresh command */ -DATA 4 0x83fd9014 0x00008010 -/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */ -DATA 4 0x83fd9014 0x00338018 -/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */ -DATA 4 0x83fd9014 0x0020801a -/* ESDSCR */ -DATA 4 0x83fd9014 0x00008000 - -/* ESDSCR: EMR with full Drive strength */ -/* DATA 4 0x83fd9014 0x0000801a */ - -/* ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8 */ -DATA 4 0x83fd9000 0xC3220000 - -/* - * ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks - * tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks - * DATA 4 0x83fd9004 0xC33574AA - */ -/* - * micron mDDR - * ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks - * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks - * DATA 4 0x83FD9004 0x101564a8 - */ -/* - * hynix mDDR - * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks - * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks - */ -DATA 4 0x83FD9004 0x704564a8 - -/* ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2 */ -DATA 4 0x83fd9010 0x000a1700 - -/* Configure CS1 */ -/* ####################### */ - -/* ESDCTL1: Enable controller */ -DATA 4 0x83fd9008 0x83220000 - -/* Init DRAM on CS1 */ -/* ESDSCR: Precharge command */ -DATA 4 0x83fd9014 0x0400800c -/* ESDSCR: Refresh command */ -DATA 4 0x83fd9014 0x00008014 -/* ESDSCR: Refresh command */ -DATA 4 0x83fd9014 0x00008014 -/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */ -DATA 4 0x83fd9014 0x0033801c -/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */ -DATA 4 0x83fd9014 0x0020801e -/* ESDSCR */ -DATA 4 0x83fd9014 0x00008004 - -/* ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8 */ -DATA 4 0x83fd9008 0xC3220000 -/* - * ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks - * tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks - * DATA 4 0x83fd900c 0xC33574AA - */ -/* - * micron mDDR - * ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks - * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks - * DATA 4 0x83FD900C 0x101564a8 - */ -/* - * hynix mDDR - * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks - * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks - */ -DATA 4 0x83FD900C 0x704564a8 - -/* ESDSCR (mDRAM configuration finished) */ -DATA 4 0x83FD9014 0x00000004 - -/* ESDSCR - clear "configuration request" bit */ -DATA 4 0x83fd9014 0x00000000 diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c deleted file mode 100644 index 247991d588..0000000000 --- a/board/ttcontrol/vision2/vision2.c +++ /dev/null @@ -1,572 +0,0 @@ -/* - * (C) Copyright 2010 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de. - * - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/crm_regs.h> -#include <asm/arch/clock.h> -#include <asm/arch/iomux-mx51.h> -#include <asm/gpio.h> -#include <asm/arch/sys_proto.h> -#include <asm/imx-common/spi.h> -#include <i2c.h> -#include <mmc.h> -#include <power/pmic.h> -#include <fsl_esdhc.h> -#include <fsl_pmic.h> -#include <mc13892.h> -#include <linux/fb.h> - -#include <ipu_pixfmt.h> - -DECLARE_GLOBAL_DATA_PTR; - -static struct fb_videomode const nec_nl6448bc26_09c = { - "NEC_NL6448BC26-09C", - 60, /* Refresh */ - 640, /* xres */ - 480, /* yres */ - 37650, /* pixclock = 26.56Mhz */ - 48, /* left margin */ - 16, /* right margin */ - 31, /* upper margin */ - 12, /* lower margin */ - 96, /* hsync-len */ - 2, /* vsync-len */ - 0, /* sync */ - FB_VMODE_NONINTERLACED, /* vmode */ - 0, /* flag */ -}; - -#ifdef CONFIG_HW_WATCHDOG -#include <watchdog.h> -void hw_watchdog_reset(void) -{ - int val; - - /* toggle watchdog trigger pin */ - val = gpio_get_value(IMX_GPIO_NR(3, 2)); - val = val ? 0 : 1; - gpio_set_value(IMX_GPIO_NR(3, 2), val); -} -#endif - -static void init_drive_strength(void) -{ - static const iomux_v3_cfg_t ddr_pads[] = { - NEW_PAD_CTRL(MX51_GRP_PKEDDR, 0), - NEW_PAD_CTRL(MX51_GRP_PKEADDR, PAD_CTL_PKE), - NEW_PAD_CTRL(MX51_GRP_DDRAPKS, 0), - NEW_PAD_CTRL(MX51_GRP_DDRAPUS, PAD_CTL_PUS_100K_UP), - NEW_PAD_CTRL(MX51_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_GRP_DDR_A0, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX51_GRP_DDR_A1, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX51_PAD_DRAM_RAS__DRAM_RAS, - PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_DRAM_CAS__DRAM_CAS, - PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_GRP_PKEDDR, PAD_CTL_PKE), - NEW_PAD_CTRL(MX51_GRP_DDRPKS, 0), - NEW_PAD_CTRL(MX51_GRP_HYSDDR0, 0), - NEW_PAD_CTRL(MX51_GRP_HYSDDR1, 0), - NEW_PAD_CTRL(MX51_GRP_HYSDDR2, 0), - NEW_PAD_CTRL(MX51_GRP_HYSDDR3, 0), - NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B0, PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B1, PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B2, PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B4, PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_GRP_DDRPUS, PAD_CTL_PUS_100K_UP), - NEW_PAD_CTRL(MX51_GRP_INMODE1, 0), - NEW_PAD_CTRL(MX51_GRP_DRAM_B0, PAD_CTL_DSE_MED), - NEW_PAD_CTRL(MX51_GRP_DRAM_B1, PAD_CTL_DSE_MED), - NEW_PAD_CTRL(MX51_GRP_DRAM_B2, PAD_CTL_DSE_MED), - NEW_PAD_CTRL(MX51_GRP_DRAM_B4, PAD_CTL_DSE_MED), - - NEW_PAD_CTRL(MX51_PAD_DRAM_SDWE__DRAM_SDWE, MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_SDCKE0__DRAM_SDCKE0, - MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_SDCKE1__DRAM_SDCKE1, - MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_SDCLK__DRAM_SDCLK, - MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS0__DRAM_SDQS0, - MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS1__DRAM_SDQS1, - MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS2__DRAM_SDQS2, - MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS3__DRAM_SDQS3, - MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_CS0__DRAM_CS0, MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_CS1__DRAM_CS1, MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_DQM0__DRAM_DQM0, MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_DQM1__DRAM_DQM1, MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_DQM2__DRAM_DQM2, MX51_GPIO_PAD_CTRL), - NEW_PAD_CTRL(MX51_PAD_DRAM_DQM3__DRAM_DQM3, MX51_GPIO_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(ddr_pads, ARRAY_SIZE(ddr_pads)); -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - - return 0; -} - -static void setup_weim(void) -{ - struct weim *pweim = (struct weim *)WEIM_BASE_ADDR; - - pweim->cs0gcr1 = 0x004100b9; - pweim->cs0gcr2 = 0x00000001; - pweim->cs0rcr1 = 0x0a018000; - pweim->cs0rcr2 = 0; - pweim->cs0wcr1 = 0x0704a240; -} - -static void setup_uart(void) -{ - static const iomux_v3_cfg_t uart_pads[] = { - MX51_PAD_EIM_D25__UART3_RXD, /* console RX */ - MX51_PAD_EIM_D26__UART3_TXD, /* console TX */ - }; - - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); -} - -#ifdef CONFIG_MXC_SPI -int board_spi_cs_gpio(unsigned bus, unsigned cs) -{ - return (bus == 0 && cs == 1) ? 121 : -1; -} - -void spi_io_init(void) -{ - static const iomux_v3_cfg_t spi_pads[] = { - NEW_PAD_CTRL(MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, PAD_CTL_HYS | - PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_CSPI1_MISO__ECSPI1_MISO, PAD_CTL_HYS | - PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_CSPI1_SS0__ECSPI1_SS0, PAD_CTL_HYS | - PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_CSPI1_SS1__ECSPI1_SS1, PAD_CTL_HYS | - PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_DI1_PIN11__ECSPI1_SS2, PAD_CTL_HYS | - PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, PAD_CTL_HYS | - PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), - }; - - imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); -} - -static void reset_peripherals(int reset) -{ -#ifdef CONFIG_VISION2_HW_1_0 - static const iomux_v3_cfg_t fec_cfg_pads[] = { - /* RXD1 */ - NEW_PAD_CTRL(MX51_PAD_EIM_EB3__GPIO2_23, NO_PAD_CTRL), - /* RXD2 */ - NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, NO_PAD_CTRL), - /* RXD3 */ - NEW_PAD_CTRL(MX51_PAD_EIM_CS3__GPIO2_28, NO_PAD_CTRL), - /* RXER */ - NEW_PAD_CTRL(MX51_PAD_EIM_CS4__GPIO2_29, NO_PAD_CTRL), - /* COL */ - NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__GPIO3_10, NO_PAD_CTRL), - /* RCLK */ - NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__GPIO3_11, NO_PAD_CTRL), - /* RXD0 */ - NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, NO_PAD_CTRL), - }; - - static const iomux_v3_cfg_t fec_pads[] = { - NEW_PAD_CTRL(MX51_PAD_EIM_CS3__FEC_RDATA3, MX51_PAD_CTRL_2), - NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, MX51_PAD_CTRL_2), - NEW_PAD_CTRL(MX51_PAD_EIM_EB3__FEC_RDATA1, MX51_PAD_CTRL_2), - MX51_PAD_NANDF_D9__FEC_RDATA0, - NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__FEC_RX_CLK, MX51_PAD_CTRL_4), - MX51_PAD_EIM_CS4__FEC_RX_ER, - NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__FEC_COL, MX51_PAD_CTRL_4), - }; -#endif - - if (reset) { - - /* reset_n is on NANDF_D15 */ - gpio_direction_output(IMX_GPIO_NR(3, 25), 0); - -#ifdef CONFIG_VISION2_HW_1_0 - /* - * set FEC Configuration lines - * set levels of FEC config lines - */ - gpio_direction_output(IMX_GPIO_NR(3, 11), 0); - gpio_direction_output(IMX_GPIO_NR(3, 10), 1); - gpio_direction_output(IMX_GPIO_NR(3, 31), 1); - - /* set direction of FEC config lines */ - gpio_direction_output(IMX_GPIO_NR(2, 27), 0); - gpio_direction_output(IMX_GPIO_NR(2, 28), 0); - gpio_direction_output(IMX_GPIO_NR(2, 29), 0); - gpio_direction_output(IMX_GPIO_NR(2, 23), 1); - - imx_iomux_v3_setup_multiple_pads(fec_cfg_pads, - ARRAY_SIZE(fec_cfg_pads)); -#endif - - /* activate reset_n pin */ - imx_iomux_v3_setup_pad( - NEW_PAD_CTRL(MX51_PAD_NANDF_D15__GPIO3_25, - PAD_CTL_DSE_MAX)); - } else { - /* set FEC Control lines */ - gpio_direction_input(IMX_GPIO_NR(3, 25)); - udelay(500); - -#ifdef CONFIG_VISION2_HW_1_0 - imx_iomux_v3_setup_multiple_pads(fec_pads, - ARRAY_SIZE(fec_pads)); -#endif - } -} - -static void power_init_mx51(void) -{ - unsigned int val; - struct pmic *p; - int ret; - - ret = pmic_init(I2C_PMIC); - if (ret) - return; - - p = pmic_get("FSL_PMIC"); - if (!p) - return; - - /* Write needed to Power Gate 2 register */ - pmic_reg_read(p, REG_POWER_MISC, &val); - - /* enable VCAM with 2.775V to enable read from PMIC */ - val = VCAMCONFIG | VCAMEN; - pmic_reg_write(p, REG_MODE_1, val); - - /* - * Set switchers in Auto in NORMAL mode & STANDBY mode - * Setup the switcher mode for SW1 & SW2 - */ - pmic_reg_read(p, REG_SW_4, &val); - val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | - (SWMODE_MASK << SWMODE2_SHIFT))); - val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | - (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); - pmic_reg_write(p, REG_SW_4, val); - - /* Setup the switcher mode for SW3 & SW4 */ - pmic_reg_read(p, REG_SW_5, &val); - val &= ~((SWMODE_MASK << SWMODE4_SHIFT) | - (SWMODE_MASK << SWMODE3_SHIFT)); - val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) | - (SWMODE_AUTO_AUTO << SWMODE3_SHIFT); - pmic_reg_write(p, REG_SW_5, val); - - - /* Set VGEN3 to 1.8V, VCAM to 3.0V */ - pmic_reg_read(p, REG_SETTING_0, &val); - val &= ~(VCAM_MASK | VGEN3_MASK); - val |= VCAM_3_0; - pmic_reg_write(p, REG_SETTING_0, val); - - /* Set VVIDEO to 2.775V, VAUDIO to 3V0, VSD to 1.8V */ - pmic_reg_read(p, REG_SETTING_1, &val); - val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK); - val |= VVIDEO_2_775 | VAUDIO_3_0 | VSD_1_8; - pmic_reg_write(p, REG_SETTING_1, val); - - /* Configure VGEN3 and VCAM regulators to use external PNP */ - val = VGEN3CONFIG | VCAMCONFIG; - pmic_reg_write(p, REG_MODE_1, val); - udelay(200); - - /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ - val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | - VVIDEOEN | VAUDIOEN | VSDEN; - pmic_reg_write(p, REG_MODE_1, val); - - pmic_reg_read(p, REG_POWER_CTL2, &val); - val |= WDIRESET; - pmic_reg_write(p, REG_POWER_CTL2, val); - - udelay(2500); - -} -#endif - -static void setup_gpios(void) -{ - static const iomux_v3_cfg_t gpio_pads_1[] = { - NEW_PAD_CTRL(MX51_PAD_GPIO1_7__GPIO1_7, PAD_CTL_PKE | - PAD_CTL_DSE_MED), /* CAM_SUP_DISn */ - NEW_PAD_CTRL(MX51_PAD_DI1_PIN12__GPIO3_1, PAD_CTL_PKE | - PAD_CTL_DSE_MED), /* DAB Display EN */ - NEW_PAD_CTRL(MX51_PAD_DI1_PIN13__GPIO3_2, PAD_CTL_PKE | - PAD_CTL_DSE_MED), /* WDOG_TRIGGER */ - }; - - static const iomux_v3_cfg_t gpio_pads_2[] = { - NEW_PAD_CTRL(MX51_PAD_DI1_D0_CS__GPIO3_3, PAD_CTL_PKE | - PAD_CTL_DSE_MED), /* Display2 TxEN */ - NEW_PAD_CTRL(MX51_PAD_DI1_D1_CS__GPIO3_4, PAD_CTL_PKE | - PAD_CTL_DSE_MED), /* DAB Light EN */ - NEW_PAD_CTRL(MX51_PAD_DISPB2_SER_DIN__GPIO3_5, PAD_CTL_PKE | - PAD_CTL_DSE_MED), /* AUDIO_MUTE */ - NEW_PAD_CTRL(MX51_PAD_DISPB2_SER_DIO__GPIO3_6, PAD_CTL_PKE | - PAD_CTL_DSE_MED), /* SPARE_OUT */ - NEW_PAD_CTRL(MX51_PAD_NANDF_D14__GPIO3_26, PAD_CTL_PKE | - PAD_CTL_DSE_MED), /* BEEPER_EN */ - NEW_PAD_CTRL(MX51_PAD_NANDF_D13__GPIO3_27, PAD_CTL_PKE | - PAD_CTL_DSE_MED), /* POWER_OFF */ - NEW_PAD_CTRL(MX51_PAD_NANDF_D10__GPIO3_30, PAD_CTL_PKE | - PAD_CTL_DSE_MED), /* FRAM_WE */ - NEW_PAD_CTRL(MX51_PAD_CSPI1_RDY__GPIO4_26, PAD_CTL_PKE | - PAD_CTL_DSE_MED), /* EXPANSION_EN */ - MX51_PAD_GPIO1_2__PWM1_PWMO, - }; - - unsigned int i; - - imx_iomux_v3_setup_multiple_pads(gpio_pads_1, ARRAY_SIZE(gpio_pads_1)); - - /* Now we need to trigger the watchdog */ - WATCHDOG_RESET(); - - imx_iomux_v3_setup_multiple_pads(gpio_pads_2, ARRAY_SIZE(gpio_pads_2)); - - /* - * Set GPIO1_4 to high and output; it is used to reset - * the system on reboot - */ - gpio_direction_output(IMX_GPIO_NR(1, 4), 1); - - gpio_direction_output(IMX_GPIO_NR(1, 7), 0); - for (i = IMX_GPIO_NR(3, 1); i < IMX_GPIO_NR(3, 7); i++) - gpio_direction_output(i, 0); - - gpio_direction_output(IMX_GPIO_NR(3, 30), 0); - - /* Set POWER_OFF high */ - gpio_direction_output(IMX_GPIO_NR(3, 27), 1); - - gpio_direction_output(IMX_GPIO_NR(3, 26), 0); - - gpio_direction_output(IMX_GPIO_NR(4, 26), 0); - - gpio_direction_output(IMX_GPIO_NR(4, 25), 1); - - WATCHDOG_RESET(); -} - -static void setup_fec(void) -{ - static const iomux_v3_cfg_t fec_pads[] = { - NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO, PAD_CTL_HYS | - PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | - PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), - MX51_PAD_NANDF_CS3__FEC_MDC, - NEW_PAD_CTRL(MX51_PAD_EIM_CS3__FEC_RDATA3, MX51_PAD_CTRL_2), - NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, MX51_PAD_CTRL_2), - NEW_PAD_CTRL(MX51_PAD_EIM_EB3__FEC_RDATA1, MX51_PAD_CTRL_2), - MX51_PAD_NANDF_D9__FEC_RDATA0, - MX51_PAD_NANDF_CS6__FEC_TDATA3, - MX51_PAD_NANDF_CS5__FEC_TDATA2, - MX51_PAD_NANDF_CS4__FEC_TDATA1, - MX51_PAD_NANDF_D8__FEC_TDATA0, - MX51_PAD_NANDF_CS7__FEC_TX_EN, - MX51_PAD_NANDF_CS2__FEC_TX_ER, - MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, - NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__FEC_COL, MX51_PAD_CTRL_4), - NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__FEC_RX_CLK, MX51_PAD_CTRL_4), - MX51_PAD_EIM_CS5__FEC_CRS, - MX51_PAD_EIM_CS4__FEC_RX_ER, - NEW_PAD_CTRL(MX51_PAD_NANDF_D11__FEC_RX_DV, MX51_PAD_CTRL_4), - }; - - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); -} - -struct fsl_esdhc_cfg esdhc_cfg[1] = { - {MMC_SDHC1_BASE_ADDR}, -}; - -int get_mmc_getcd(u8 *cd, struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - - if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - *cd = gpio_get_value(IMX_GPIO_NR(1, 0)); - else - *cd = 0; - - return 0; -} - -#ifdef CONFIG_FSL_ESDHC -int board_mmc_init(bd_t *bis) -{ - static const iomux_v3_cfg_t sd1_pads[] = { - NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD, PAD_CTL_DSE_MAX | - PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK, PAD_CTL_DSE_MAX | - PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0, PAD_CTL_DSE_MAX | - PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1, PAD_CTL_DSE_MAX | - PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2, PAD_CTL_DSE_MAX | - PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3, PAD_CTL_DSE_MAX | - PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST), - NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_HYS), - NEW_PAD_CTRL(MX51_PAD_GPIO1_1__SD1_WP, PAD_CTL_HYS), - }; - - imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads)); - - esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); -} -#endif - -void lcd_enable(void) -{ - static const iomux_v3_cfg_t lcd_pads[] = { - MX51_PAD_DI1_PIN2__DI1_PIN2, - MX51_PAD_DI1_PIN3__DI1_PIN3, - }; - - int ret; - - imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); - - gpio_set_value(IMX_GPIO_NR(1, 2), 1); - imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_2__GPIO1_2, - NO_PAD_CTRL)); - - ret = ipuv3_fb_init(&nec_nl6448bc26_09c, 0, IPU_PIX_FMT_RGB666); - if (ret) - puts("LCD cannot be configured\n"); -} - -int board_early_init_f(void) -{ - - - init_drive_strength(); - - /* Setup debug led */ - gpio_direction_output(IMX_GPIO_NR(1, 6), 0); - imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6, - PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST)); - - /* wait a little while to give the pll time to settle */ - sdelay(100000); - - setup_weim(); - setup_uart(); - setup_fec(); - setup_gpios(); - - spi_io_init(); - - return 0; -} - -static void backlight(int on) -{ - if (on) { - gpio_set_value(IMX_GPIO_NR(3, 1), 1); - udelay(10000); - gpio_set_value(IMX_GPIO_NR(3, 4), 1); - } else { - gpio_set_value(IMX_GPIO_NR(3, 1), 0); - gpio_set_value(IMX_GPIO_NR(3, 4), 0); - } -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - lcd_enable(); - - backlight(1); - - return 0; -} - -int board_late_init(void) -{ - power_init_mx51(); - - reset_peripherals(1); - udelay(2000); - reset_peripherals(0); - udelay(2000); - - /* Early revisions require a second reset */ -#ifdef CONFIG_VISION2_HW_1_0 - reset_peripherals(1); - udelay(2000); - reset_peripherals(0); - udelay(2000); -#endif - - return 0; -} - -/* - * Do not overwrite the console - * Use always serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} - -int checkboard(void) -{ - puts("Board: TTControl Vision II CPU V\n"); - - return 0; -} - -int do_vision_lcd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int on; - - if (argc < 2) - return cmd_usage(cmdtp); - - on = (strcmp(argv[1], "on") == 0); - backlight(on); - - return 0; -} - -U_BOOT_CMD( - lcdbl, CONFIG_SYS_MAXARGS, 1, do_vision_lcd, - "Vision2 Backlight", - "lcdbl [on|off]\n" -); diff --git a/board/udoo/Kconfig b/board/udoo/Kconfig index 970f39f0f7..78617a2138 100644 --- a/board/udoo/Kconfig +++ b/board/udoo/Kconfig @@ -3,9 +3,6 @@ if TARGET_UDOO config SYS_BOARD default "udoo" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "udoo" diff --git a/board/udoo/udoo.c b/board/udoo/udoo.c index a8bd90a42a..a574a2fcec 100644 --- a/board/udoo/udoo.c +++ b/board/udoo/udoo.c @@ -191,23 +191,26 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_FEC_MXC bus = fec_get_miibus(base, -1); if (!bus) - return 0; + return -EINVAL; /* scan phy 4,5,6,7 */ phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); if (!phydev) { - free(bus); - return 0; + ret = -EINVAL; + goto free_bus; } printf("using phy at %d\n", phydev->addr); ret = fec_probe(bis, -1, base, bus, phydev); - if (ret) { - printf("FEC MXC: %s:failed\n", __func__); - free(phydev); - free(bus); - } + if (ret) + goto free_phydev; #endif return 0; + +free_phydev: + free(phydev); +free_bus: + free(bus); + return ret; } int board_mmc_init(bd_t *bis) diff --git a/board/vpac270/Kconfig b/board/vpac270/Kconfig deleted file mode 100644 index 1701b35d12..0000000000 --- a/board/vpac270/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_VPAC270 - -config SYS_BOARD - default "vpac270" - -config SYS_CONFIG_NAME - default "vpac270" - -endif diff --git a/board/vpac270/MAINTAINERS b/board/vpac270/MAINTAINERS deleted file mode 100644 index 1c627657ba..0000000000 --- a/board/vpac270/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -VPAC270 BOARD -M: Marek Vasut <marek.vasut@gmail.com> -S: Maintained -F: board/vpac270/ -F: include/configs/vpac270.h -F: configs/vpac270_nor_128_defconfig -F: configs/vpac270_nor_256_defconfig -F: configs/vpac270_ond_256_defconfig diff --git a/board/vpac270/Makefile b/board/vpac270/Makefile deleted file mode 100644 index ad7f7d8d66..0000000000 --- a/board/vpac270/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Voipac PXA270 Support -# -# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifndef CONFIG_SPL_BUILD -obj-y := vpac270.o -else -obj-y := onenand.o -endif diff --git a/board/vpac270/onenand.c b/board/vpac270/onenand.c deleted file mode 100644 index a749b310c5..0000000000 --- a/board/vpac270/onenand.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Voipac PXA270 OneNAND SPL - * - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <config.h> -#include <asm/io.h> -#include <onenand_uboot.h> -#include <asm/arch/pxa.h> - -void board_init_f(unsigned long unused) -{ - extern uint32_t _end; - uint32_t tmp; - - asm volatile("mov %0, pc" : "=r"(tmp)); - tmp >>= 24; - - /* The code runs from OneNAND RAM, copy SPL to SRAM and execute it. */ - if (tmp == 0) { - tmp = (uint32_t)&_end - CONFIG_SPL_TEXT_BASE; - onenand_spl_load_image(0, tmp, (void *)CONFIG_SPL_TEXT_BASE); - asm volatile("mov pc, %0" : : "r"(CONFIG_SPL_TEXT_BASE)); - } - - /* Hereby, the code runs from (S)RAM, copy U-Boot and execute it. */ - arch_cpu_init(); - pxa2xx_dram_init(); - onenand_spl_load_image(CONFIG_SPL_ONENAND_LOAD_ADDR, - CONFIG_SPL_ONENAND_LOAD_SIZE, - (void *)CONFIG_SYS_TEXT_BASE); - asm volatile("mov pc, %0" : : "r"(CONFIG_SYS_TEXT_BASE)); - - for (;;) - ; -} - -void __attribute__((noreturn)) hang(void) -{ - for (;;) - ; -} diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds deleted file mode 100644 index 954afb9f8b..0000000000 --- a/board/vpac270/u-boot-spl.lds +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> - * on behalf of DENX Software Engineering GmbH - * - * January 2004 - Changed to support H4 device - * Copyright (c) 2004-2008 Texas Instruments - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = CONFIG_SPL_TEXT_BASE; - .text.0 : - { - *(.vectors) - arch/arm/cpu/pxa/start.o (.text*) - arch/arm/lib/built-in.o (.text*) - board/vpac270/built-in.o (.text*) - drivers/built-in.o (.text*) - } - - - /* Start of the rest of the SPL */ - . = CONFIG_SPL_TEXT_BASE + 0x800; - - .text.1 : - { - *(.text*) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { - *(.data*) - } - - . = ALIGN(4); - - __image_copy_end = .; - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - - . = ALIGN(0x800); - - .end : - { - *(.__end) - } - - _image_binary_end = .; - - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; - *(.bss*) - . = ALIGN(4); - __bss_end = .; - } - - .dynsym _image_binary_end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c deleted file mode 100644 index 8d777df846..0000000000 --- a/board/vpac270/vpac270.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Voipac PXA270 Support - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/arch/regs-mmc.h> -#include <asm/arch/pxa.h> -#include <netdev.h> -#include <serial.h> -#include <asm/io.h> -#include <usb.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ -int board_init(void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* Arch number of vpac270 */ - gd->bd->bi_arch_number = MACH_TYPE_VPAC270; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - return 0; -} - -int dram_init(void) -{ -#ifndef CONFIG_ONENAND - pxa2xx_dram_init(); -#endif - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - -#ifdef CONFIG_RAM_256M - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; -#endif -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif - -#ifdef CONFIG_CMD_USB -int board_usb_init(int index, enum usb_init_type init) -{ - writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE), - UHCHR); - - writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR); - - while (readl(UHCHR) & UHCHR_FSBIR) - ; - - writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR); - writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE); - - /* Clear any OTG Pin Hold */ - if (readl(PSSR) & PSSR_OTGPH) - writel(readl(PSSR) | PSSR_OTGPH, PSSR); - - writel(readl(UHCRHDA) & ~(0x200), UHCRHDA); - writel(readl(UHCRHDA) | 0x100, UHCRHDA); - - /* Set port power control mask bits, only 3 ports. */ - writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB); - - /* enable port 2 */ - writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS | - UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR); - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} - -void usb_board_stop(void) -{ - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - udelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCCOMS) | 1, UHCCOMS); - udelay(10); - - writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN); - - return; -} -#endif - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif diff --git a/board/wandboard/Kconfig b/board/wandboard/Kconfig index 3928566715..def63696e5 100644 --- a/board/wandboard/Kconfig +++ b/board/wandboard/Kconfig @@ -3,9 +3,6 @@ if TARGET_WANDBOARD config SYS_BOARD default "wandboard" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "wandboard" diff --git a/board/warp/Kconfig b/board/warp/Kconfig index 7b569ccb64..dc02636319 100644 --- a/board/warp/Kconfig +++ b/board/warp/Kconfig @@ -3,9 +3,6 @@ if TARGET_WARP config SYS_BOARD default "warp" -config SYS_SOC - default "mx6" - config SYS_CONFIG_NAME default "warp" diff --git a/board/xaeniax/Kconfig b/board/xaeniax/Kconfig deleted file mode 100644 index 519e21fb9a..0000000000 --- a/board/xaeniax/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_XAENIAX - -config SYS_BOARD - default "xaeniax" - -config SYS_CONFIG_NAME - default "xaeniax" - -endif diff --git a/board/xaeniax/MAINTAINERS b/board/xaeniax/MAINTAINERS deleted file mode 100644 index 44bb5883f2..0000000000 --- a/board/xaeniax/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -XAENIAX BOARD -#M: - -S: Maintained -F: board/xaeniax/ -F: include/configs/xaeniax.h -F: configs/xaeniax_defconfig diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile deleted file mode 100644 index e5f116debb..0000000000 --- a/board/xaeniax/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := xaeniax.o flash.o diff --git a/board/xaeniax/flash.c b/board/xaeniax/flash.c deleted file mode 100644 index 6ad62166a9..0000000000 --- a/board/xaeniax/flash.c +++ /dev/null @@ -1,412 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/byteorder/swab.h> - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#define FLASH_PORT_WIDTH32 -#undef FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) -#else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long -#define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (FPW *addr, flash_info_t *info); -static int write_data (flash_info_t *info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t *info); -void inline spin_wheel (void); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - case 1: - flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_2, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect ( FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0] ); - - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] ); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F128J3A: - printf ("28F128J3A\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW *addr, flash_info_t *info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - - switch (value) { - - case (FPW) INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x02000000; - break; /* => 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int prot, sect; - ulong type, start; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - *addr = (FPW) 0x00500050; /* clear status register */ - *addr = (FPW) 0x00200020; /* erase setup */ - *addr = (FPW) 0x00D000D0; /* erase confirm */ - - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = (FPW) 0x00B000B0; /* suspend erase */ - *addr = (FPW) 0x00FF00FF; /* reset to read mode */ - rcode = 1; - break; - } - } - - *addr = 0x00500050; /* clear status register cmd. */ - *addr = 0x00FF00FF; /* resest to read mode */ - - printf (" done\n"); - } - } - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t *info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr); - return (2); - } - /* Disable interrupts which might cause a timeout here */ - disable_interrupts(); - - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); - } - } - - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/board/xaeniax/xaeniax.c b/board/xaeniax/xaeniax.c deleted file mode 100644 index 995c262b6c..0000000000 --- a/board/xaeniax/xaeniax.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * (C) Copyright 2004 - * Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/arch/pxa.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of xaeniax */ - gd->bd->bi_arch_number = 585; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - return 0; -} - -int board_late_init(void) -{ - setenv("stdout", "serial"); - setenv("stderr", "serial"); - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/zipitz2/Kconfig b/board/zipitz2/Kconfig deleted file mode 100644 index c6635040a3..0000000000 --- a/board/zipitz2/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_ZIPITZ2 - -config SYS_BOARD - default "zipitz2" - -config SYS_CONFIG_NAME - default "zipitz2" - -endif diff --git a/board/zipitz2/MAINTAINERS b/board/zipitz2/MAINTAINERS deleted file mode 100644 index 55b0f6406c..0000000000 --- a/board/zipitz2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ZIPITZ2 BOARD -M: Marek Vasut <marek.vasut@gmail.com> -S: Maintained -F: board/zipitz2/ -F: include/configs/zipitz2.h -F: configs/zipitz2_defconfig diff --git a/board/zipitz2/Makefile b/board/zipitz2/Makefile deleted file mode 100644 index 855f6bcda8..0000000000 --- a/board/zipitz2/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Copyright (C) 2009 -# Marek Vasut <marek.vasut@gmail.com> -# -# Heavily based on pxa255_idp platform -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := zipitz2.o diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c deleted file mode 100644 index 90bba6a5fc..0000000000 --- a/board/zipitz2/zipitz2.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * Copyright (C) 2009 - * Marek Vasut <marek.vasut@gmail.com> - * - * Heavily based on pxa255_idp platform - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <serial.h> -#include <asm/arch/hardware.h> -#include <asm/arch/pxa.h> -#include <asm/arch/regs-mmc.h> -#include <spi.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_CMD_SPI -void lcd_start(void); -#else -inline void lcd_start(void) {}; -#endif - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of Z2 */ - gd->bd->bi_arch_number = MACH_TYPE_ZIPIT2; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* Enable LCD */ - lcd_start(); - - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif - -#ifdef CONFIG_CMD_SPI - -struct { - unsigned char reg; - unsigned short data; - unsigned char mdelay; -} lcd_data[] = { - { 0x07, 0x0000, 0 }, - { 0x13, 0x0000, 10 }, - { 0x11, 0x3004, 0 }, - { 0x14, 0x200F, 0 }, - { 0x10, 0x1a20, 0 }, - { 0x13, 0x0040, 50 }, - { 0x13, 0x0060, 0 }, - { 0x13, 0x0070, 200 }, - { 0x01, 0x0127, 0 }, - { 0x02, 0x0700, 0 }, - { 0x03, 0x1030, 0 }, - { 0x08, 0x0208, 0 }, - { 0x0B, 0x0620, 0 }, - { 0x0C, 0x0110, 0 }, - { 0x30, 0x0120, 0 }, - { 0x31, 0x0127, 0 }, - { 0x32, 0x0000, 0 }, - { 0x33, 0x0503, 0 }, - { 0x34, 0x0727, 0 }, - { 0x35, 0x0124, 0 }, - { 0x36, 0x0706, 0 }, - { 0x37, 0x0701, 0 }, - { 0x38, 0x0F00, 0 }, - { 0x39, 0x0F00, 0 }, - { 0x40, 0x0000, 0 }, - { 0x41, 0x0000, 0 }, - { 0x42, 0x013f, 0 }, - { 0x43, 0x0000, 0 }, - { 0x44, 0x013f, 0 }, - { 0x45, 0x0000, 0 }, - { 0x46, 0xef00, 0 }, - { 0x47, 0x013f, 0 }, - { 0x48, 0x0000, 0 }, - { 0x07, 0x0015, 30 }, - { 0x07, 0x0017, 0 }, - { 0x20, 0x0000, 0 }, - { 0x21, 0x0000, 0 }, - { 0x22, 0x0000, 0 }, -}; - -void zipitz2_spi_sda(int set) -{ - /* GPIO 13 */ - if (set) - writel((1 << 13), GPSR0); - else - writel((1 << 13), GPCR0); -} - -void zipitz2_spi_scl(int set) -{ - /* GPIO 22 */ - if (set) - writel((1 << 22), GPCR0); - else - writel((1 << 22), GPSR0); -} - -unsigned char zipitz2_spi_read(void) -{ - /* GPIO 40 */ - return !!(readl(GPLR1) & (1 << 8)); -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - /* Always valid */ - return 1; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - /* GPIO 88 low */ - writel((1 << 24), GPCR2); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - /* GPIO 88 high */ - writel((1 << 24), GPSR2); - -} - -void lcd_start(void) -{ - int i; - unsigned char reg[3] = { 0x74, 0x00, 0 }; - unsigned char data[3] = { 0x76, 0, 0 }; - unsigned char dummy[3] = { 0, 0, 0 }; - - /* PWM2 AF */ - writel(readl(GAFR0_L) | 0x00800000, GAFR0_L); - /* Enable clock to all PWM */ - writel(readl(CKEN) | 0x3, CKEN); - /* Configure PWM2 */ - writel(0x4f, PWM_CTRL2); - writel(0x2ff, PWM_PWDUTY2); - writel(792, PWM_PERVAL2); - - /* Toggle the reset pin to reset the LCD */ - writel((1 << 19), GPSR0); - udelay(100000); - writel((1 << 19), GPCR0); - udelay(20000); - writel((1 << 19), GPSR0); - udelay(20000); - - /* Program the LCD init sequence */ - for (i = 0; i < sizeof(lcd_data) / sizeof(lcd_data[0]); i++) { - reg[0] = 0x74; - reg[1] = 0x0; - reg[2] = lcd_data[i].reg; - spi_xfer(NULL, 24, reg, dummy, SPI_XFER_BEGIN | SPI_XFER_END); - - data[0] = 0x76; - data[1] = lcd_data[i].data >> 8; - data[2] = lcd_data[i].data & 0xff; - spi_xfer(NULL, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END); - - if (lcd_data[i].mdelay) - udelay(lcd_data[i].mdelay * 1000); - } - - writel((1 << 11), GPSR0); -} -#endif diff --git a/common/Makefile b/common/Makefile index 556fb07592..491c56552f 100644 --- a/common/Makefile +++ b/common/Makefile @@ -214,6 +214,7 @@ obj-$(CONFIG_DFU_TFTP) += update.o obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o obj-$(CONFIG_CMD_DFU) += cmd_dfu.o obj-$(CONFIG_CMD_GPT) += cmd_gpt.o +obj-$(CONFIG_CMD_ETHSW) += cmd_ethsw.o # Power obj-$(CONFIG_CMD_PMIC) += cmd_pmic.o diff --git a/common/bootm.c b/common/bootm.c index 667c93471b..58936ca497 100644 --- a/common/bootm.c +++ b/common/bootm.c @@ -389,6 +389,15 @@ int bootm_decomp_image(int comp, ulong load, ulong image_start, int type, break; } #endif /* CONFIG_LZO */ +#ifdef CONFIG_LZ4 + case IH_COMP_LZ4: { + size_t size = unc_len; + + ret = ulz4fn(image_buf, image_len, load_buf, &size); + image_len = size; + break; + } +#endif /* CONFIG_LZ4 */ default: printf("Unimplemented compression type %d\n", comp); return BOOTM_ERR_UNIMPLEMENTED; @@ -474,7 +483,9 @@ ulong bootm_disable_interrupts(void) #ifdef CONFIG_NETCONSOLE /* Stop the ethernet stack if NetConsole could have left it up */ eth_halt(); +# ifndef CONFIG_DM_ETH eth_unregister(eth_get_dev()); +# endif #endif #if defined(CONFIG_CMD_USB) diff --git a/common/cli_simple.c b/common/cli_simple.c index 00a8d2f48b..d8b40c9391 100644 --- a/common/cli_simple.c +++ b/common/cli_simple.c @@ -258,7 +258,7 @@ int cli_simple_run_command(const char *cmd, int flag) void cli_simple_loop(void) { - static char lastcommand[CONFIG_SYS_CBSIZE] = { 0, }; + static char lastcommand[CONFIG_SYS_CBSIZE + 1] = { 0, }; int len; int flag; diff --git a/common/cmd_armflash.c b/common/cmd_armflash.c index 1db92b0599..af453f7b3b 100644 --- a/common/cmd_armflash.c +++ b/common/cmd_armflash.c @@ -175,7 +175,7 @@ static void parse_flash(void) parse_bank(bank); } -static void load_image(const char * const name, const ulong address) +static int load_image(const char * const name, const ulong address) { struct afs_image *afi = NULL; int i; @@ -191,7 +191,7 @@ static void load_image(const char * const name, const ulong address) } if (!afi) { printf("image \"%s\" not found in flash\n", name); - return; + return CMD_RET_FAILURE; } for (i = 0; i < afi->region_count; i++) { @@ -204,7 +204,7 @@ static void load_image(const char * const name, const ulong address) to = afi->regions[i].load_address; } else { printf("no valid load address\n"); - return; + return CMD_RET_FAILURE; } memcpy((void *)to, (void *)from, afi->regions[i].size); @@ -215,6 +215,7 @@ static void load_image(const char * const name, const ulong address) to, afi->regions[i].size); } + return CMD_RET_SUCCESS; } static void print_images(void) @@ -251,27 +252,47 @@ static void print_images(void) } } +static int exists(const char * const name) +{ + int i; + + parse_flash(); + for (i = 0; i < num_afs_images; i++) { + struct afs_image *afi = &afs_images[i]; + + if (strcmp(afi->name, name) == 0) + return CMD_RET_SUCCESS; + } + return CMD_RET_FAILURE; +} + static int do_afs(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { + int ret = CMD_RET_SUCCESS; + if (argc == 1) { print_images(); + } else if (argc == 3 && !strcmp(argv[1], "exists")) { + ret = exists(argv[2]); } else if (argc == 3 && !strcmp(argv[1], "load")) { - load_image(argv[2], 0x0); + ret = load_image(argv[2], 0x0); } else if (argc == 4 && !strcmp(argv[1], "load")) { ulong load_addr; load_addr = simple_strtoul(argv[3], NULL, 16); - load_image(argv[2], load_addr); + ret = load_image(argv[2], load_addr); } else { return CMD_RET_USAGE; } - return 0; + return ret; } U_BOOT_CMD(afs, 4, 0, do_afs, "show AFS partitions", "no arguments\n" " - list images in flash\n" + "exists <image>\n" + " - returns 1 if an image exists, else 0\n" "load <image>\n" " - load an image to the location indicated in the header\n" "load <image> 0x<address>\n" diff --git a/common/cmd_ethsw.c b/common/cmd_ethsw.c new file mode 100644 index 0000000000..8e452e95be --- /dev/null +++ b/common/cmd_ethsw.c @@ -0,0 +1,1027 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Ethernet Switch commands + */ + +#include <common.h> +#include <command.h> +#include <errno.h> +#include <env_flags.h> +#include <ethsw.h> + +static const char *ethsw_name; + +#define ETHSW_PORT_STATS_HELP "ethsw [port <port_no>] statistics " \ +"{ [help] | [clear] } - show an l2 switch port's statistics" + +static int ethsw_port_stats_help_key_func(struct ethsw_command_def *parsed_cmd) +{ + printf(ETHSW_PORT_STATS_HELP"\n"); + + return CMD_RET_SUCCESS; +} + +#define ETHSW_LEARN_HELP "ethsw [port <port_no>] learning " \ +"{ [help] | show | auto | disable } " \ +"- enable/disable/show learning configuration on a port" + +static int ethsw_learn_help_key_func(struct ethsw_command_def *parsed_cmd) +{ + printf(ETHSW_LEARN_HELP"\n"); + + return CMD_RET_SUCCESS; +} + +#define ETHSW_FDB_HELP "ethsw [port <port_no>] [vlan <vid>] fdb " \ +"{ [help] | show | flush | { add | del } <mac> } " \ +"- Add/delete a mac entry in FDB; use show to see FDB entries; " \ +"if vlan <vid> is missing, VID 1 will be used" + +static int ethsw_fdb_help_key_func(struct ethsw_command_def *parsed_cmd) +{ + printf(ETHSW_FDB_HELP"\n"); + + return CMD_RET_SUCCESS; +} + +#define ETHSW_PVID_HELP "ethsw [port <port_no>] " \ +"pvid { [help] | show | <pvid> } " \ +"- set/show PVID (ingress and egress VLAN tagging) for a port" + +static int ethsw_pvid_help_key_func(struct ethsw_command_def *parsed_cmd) +{ + printf(ETHSW_PVID_HELP"\n"); + + return CMD_RET_SUCCESS; +} + +#define ETHSW_VLAN_HELP "ethsw [port <port_no>] vlan " \ +"{ [help] | show | add <vid> | del <vid> } " \ +"- add a VLAN to a port (VLAN members)" + +static int ethsw_vlan_help_key_func(struct ethsw_command_def *parsed_cmd) +{ + printf(ETHSW_VLAN_HELP"\n"); + + return CMD_RET_SUCCESS; +} + +#define ETHSW_PORT_UNTAG_HELP "ethsw [port <port_no>] untagged " \ +"{ [help] | show | all | none | pvid } " \ +" - set egress tagging mod for a port" + +static int ethsw_port_untag_help_key_func(struct ethsw_command_def *parsed_cmd) +{ + printf(ETHSW_PORT_UNTAG_HELP"\n"); + + return CMD_RET_SUCCESS; +} + +#define ETHSW_EGR_VLAN_TAG_HELP "ethsw [port <port_no>] egress tag " \ +"{ [help] | show | pvid | classified } " \ +"- Configure VID source for egress tag. " \ +"Tag's VID could be the frame's classified VID or the PVID of the port" + +static int ethsw_egr_tag_help_key_func(struct ethsw_command_def *parsed_cmd) +{ + printf(ETHSW_EGR_VLAN_TAG_HELP"\n"); + + return CMD_RET_SUCCESS; +} + +#define ETHSW_VLAN_FDB_HELP "ethsw vlan fdb " \ +"{ [help] | show | shared | private } " \ +"- make VLAN learning shared or private" + +static int ethsw_vlan_learn_help_key_func(struct ethsw_command_def *parsed_cmd) +{ + printf(ETHSW_VLAN_FDB_HELP"\n"); + + return CMD_RET_SUCCESS; +} + +#define ETHSW_PORT_INGR_FLTR_HELP "ethsw [port <port_no>] ingress filtering" \ +" { [help] | show | enable | disable } " \ +"- enable/disable VLAN ingress filtering on port" + +static int ethsw_ingr_fltr_help_key_func(struct ethsw_command_def *parsed_cmd) +{ + printf(ETHSW_PORT_INGR_FLTR_HELP"\n"); + + return CMD_RET_SUCCESS; +} + +static struct keywords_to_function { + enum ethsw_keyword_id cmd_keyword[ETHSW_MAX_CMD_PARAMS]; + int cmd_func_offset; + int (*keyword_function)(struct ethsw_command_def *parsed_cmd); +} ethsw_cmd_def[] = { + { + .cmd_keyword = { + ethsw_id_enable, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_enable), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_disable, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_disable), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_show, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_show), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_statistics, + ethsw_id_help, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_port_stats_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_statistics, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_stats), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_statistics, + ethsw_id_clear, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_stats_clear), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_learning, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_learn_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_learning, + ethsw_id_help, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_learn_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_learning, + ethsw_id_show, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_learn_show), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_learning, + ethsw_id_auto, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_learn), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_learning, + ethsw_id_disable, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_learn), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_fdb, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_fdb_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_fdb, + ethsw_id_help, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_fdb_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_fdb, + ethsw_id_show, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + fdb_show), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_fdb, + ethsw_id_flush, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + fdb_flush), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_fdb, + ethsw_id_add, + ethsw_id_add_del_mac, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + fdb_entry_add), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_fdb, + ethsw_id_del, + ethsw_id_add_del_mac, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + fdb_entry_del), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_pvid, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_pvid_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_pvid, + ethsw_id_help, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_pvid_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_pvid, + ethsw_id_show, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + pvid_show), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_pvid, + ethsw_id_pvid_no, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + pvid_set), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_vlan, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_vlan_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_vlan, + ethsw_id_help, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_vlan_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_vlan, + ethsw_id_show, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + vlan_show), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_vlan, + ethsw_id_add, + ethsw_id_add_del_no, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + vlan_set), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_vlan, + ethsw_id_del, + ethsw_id_add_del_no, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + vlan_set), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_untagged, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_port_untag_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_untagged, + ethsw_id_help, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_port_untag_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_untagged, + ethsw_id_show, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_untag_show), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_untagged, + ethsw_id_all, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_untag_set), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_untagged, + ethsw_id_none, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_untag_set), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_untagged, + ethsw_id_pvid, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_untag_set), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_egress, + ethsw_id_tag, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_egr_tag_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_egress, + ethsw_id_tag, + ethsw_id_help, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_egr_tag_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_egress, + ethsw_id_tag, + ethsw_id_show, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_egr_vlan_show), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_egress, + ethsw_id_tag, + ethsw_id_pvid, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_egr_vlan_set), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_egress, + ethsw_id_tag, + ethsw_id_classified, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_egr_vlan_set), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_vlan, + ethsw_id_fdb, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_vlan_learn_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_vlan, + ethsw_id_fdb, + ethsw_id_help, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_vlan_learn_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_vlan, + ethsw_id_fdb, + ethsw_id_show, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + vlan_learn_show), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_vlan, + ethsw_id_fdb, + ethsw_id_shared, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + vlan_learn_set), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_vlan, + ethsw_id_fdb, + ethsw_id_private, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + vlan_learn_set), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_ingress, + ethsw_id_filtering, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_ingr_fltr_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_ingress, + ethsw_id_filtering, + ethsw_id_help, + ethsw_id_key_end, + }, + .cmd_func_offset = -1, + .keyword_function = ðsw_ingr_fltr_help_key_func, + }, { + .cmd_keyword = { + ethsw_id_ingress, + ethsw_id_filtering, + ethsw_id_show, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_ingr_filt_show), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_ingress, + ethsw_id_filtering, + ethsw_id_enable, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_ingr_filt_set), + .keyword_function = NULL, + }, { + .cmd_keyword = { + ethsw_id_ingress, + ethsw_id_filtering, + ethsw_id_disable, + ethsw_id_key_end, + }, + .cmd_func_offset = offsetof(struct ethsw_command_func, + port_ingr_filt_set), + .keyword_function = NULL, + }, +}; + +struct keywords_optional { + int cmd_keyword[ETHSW_MAX_CMD_PARAMS]; +} cmd_opt_def[] = { + { + .cmd_keyword = { + ethsw_id_port, + ethsw_id_port_no, + ethsw_id_key_end, + }, + }, { + .cmd_keyword = { + ethsw_id_vlan, + ethsw_id_vlan_no, + ethsw_id_key_end, + }, + }, { + .cmd_keyword = { + ethsw_id_port, + ethsw_id_port_no, + ethsw_id_vlan, + ethsw_id_vlan_no, + ethsw_id_key_end, + }, + }, +}; + +static int keyword_match_gen(enum ethsw_keyword_id key_id, int argc, char + *const argv[], int *argc_nr, + struct ethsw_command_def *parsed_cmd); +static int keyword_match_port(enum ethsw_keyword_id key_id, int argc, + char *const argv[], int *argc_nr, + struct ethsw_command_def *parsed_cmd); +static int keyword_match_vlan(enum ethsw_keyword_id key_id, int argc, + char *const argv[], int *argc_nr, + struct ethsw_command_def *parsed_cmd); +static int keyword_match_pvid(enum ethsw_keyword_id key_id, int argc, + char *const argv[], int *argc_nr, + struct ethsw_command_def *parsed_cmd); +static int keyword_match_mac_addr(enum ethsw_keyword_id key_id, int argc, + char *const argv[], int *argc_nr, + struct ethsw_command_def *parsed_cmd); + +/* + * Define properties for each keyword; + * keep the order synced with enum ethsw_keyword_id + */ +struct keyword_def { + const char *keyword_name; + int (*match)(enum ethsw_keyword_id key_id, int argc, char *const argv[], + int *argc_nr, struct ethsw_command_def *parsed_cmd); +} keyword[] = { + { + .keyword_name = "help", + .match = &keyword_match_gen, + }, { + .keyword_name = "show", + .match = &keyword_match_gen, + }, { + .keyword_name = "port", + .match = &keyword_match_port + }, { + .keyword_name = "enable", + .match = &keyword_match_gen, + }, { + .keyword_name = "disable", + .match = &keyword_match_gen, + }, { + .keyword_name = "statistics", + .match = &keyword_match_gen, + }, { + .keyword_name = "clear", + .match = &keyword_match_gen, + }, { + .keyword_name = "learning", + .match = &keyword_match_gen, + }, { + .keyword_name = "auto", + .match = &keyword_match_gen, + }, { + .keyword_name = "vlan", + .match = &keyword_match_vlan, + }, { + .keyword_name = "fdb", + .match = &keyword_match_gen, + }, { + .keyword_name = "add", + .match = &keyword_match_mac_addr, + }, { + .keyword_name = "del", + .match = &keyword_match_mac_addr, + }, { + .keyword_name = "flush", + .match = &keyword_match_gen, + }, { + .keyword_name = "pvid", + .match = &keyword_match_pvid, + }, { + .keyword_name = "untagged", + .match = &keyword_match_gen, + }, { + .keyword_name = "all", + .match = &keyword_match_gen, + }, { + .keyword_name = "none", + .match = &keyword_match_gen, + }, { + .keyword_name = "egress", + .match = &keyword_match_gen, + }, { + .keyword_name = "tag", + .match = &keyword_match_gen, + }, { + .keyword_name = "classified", + .match = &keyword_match_gen, + }, { + .keyword_name = "shared", + .match = &keyword_match_gen, + }, { + .keyword_name = "private", + .match = &keyword_match_gen, + }, { + .keyword_name = "ingress", + .match = &keyword_match_gen, + }, { + .keyword_name = "filtering", + .match = &keyword_match_gen, + }, +}; + +/* + * Function used by an Ethernet Switch driver to set the functions + * that must be called by the parser when an ethsw command is given + */ +int ethsw_define_functions(const struct ethsw_command_func *cmd_func) +{ + int i; + void **aux_p; + int (*cmd_func_aux)(struct ethsw_command_def *); + + if (!cmd_func->ethsw_name) + return -EINVAL; + + ethsw_name = cmd_func->ethsw_name; + + for (i = 0; i < ARRAY_SIZE(ethsw_cmd_def); i++) { + /* + * get the pointer to the function send by the Ethernet Switch + * driver that corresponds to the proper ethsw command + */ + if (ethsw_cmd_def[i].keyword_function) + continue; + + aux_p = (void *)cmd_func + ethsw_cmd_def[i].cmd_func_offset; + + cmd_func_aux = (int (*)(struct ethsw_command_def *)) *aux_p; + ethsw_cmd_def[i].keyword_function = cmd_func_aux; + } + + return 0; +} + +/* Generic function used to match a keyword only by a string */ +static int keyword_match_gen(enum ethsw_keyword_id key_id, int argc, + char *const argv[], int *argc_nr, + struct ethsw_command_def *parsed_cmd) +{ + if (strcmp(argv[*argc_nr], keyword[key_id].keyword_name) == 0) { + parsed_cmd->cmd_to_keywords[*argc_nr] = key_id; + + return 1; + } + return 0; +} + +/* Function used to match the command's port */ +static int keyword_match_port(enum ethsw_keyword_id key_id, int argc, + char *const argv[], int *argc_nr, + struct ethsw_command_def *parsed_cmd) +{ + unsigned long val; + + if (!keyword_match_gen(key_id, argc, argv, argc_nr, parsed_cmd)) + return 0; + + if (*argc_nr + 1 >= argc) + return 0; + + if (strict_strtoul(argv[*argc_nr + 1], 10, &val) != -EINVAL) { + parsed_cmd->port = val; + (*argc_nr)++; + parsed_cmd->cmd_to_keywords[*argc_nr] = ethsw_id_port_no; + return 1; + } + + return 0; +} + +/* Function used to match the command's vlan */ +static int keyword_match_vlan(enum ethsw_keyword_id key_id, int argc, + char *const argv[], int *argc_nr, + struct ethsw_command_def *parsed_cmd) +{ + unsigned long val; + int aux; + + if (!keyword_match_gen(key_id, argc, argv, argc_nr, parsed_cmd)) + return 0; + + if (*argc_nr + 1 >= argc) + return 0; + + if (strict_strtoul(argv[*argc_nr + 1], 10, &val) != -EINVAL) { + parsed_cmd->vid = val; + (*argc_nr)++; + parsed_cmd->cmd_to_keywords[*argc_nr] = ethsw_id_vlan_no; + return 1; + } + + aux = *argc_nr + 1; + + if (keyword_match_gen(ethsw_id_add, argc, argv, &aux, parsed_cmd)) + parsed_cmd->cmd_to_keywords[*argc_nr + 1] = ethsw_id_add; + else if (keyword_match_gen(ethsw_id_del, argc, argv, &aux, parsed_cmd)) + parsed_cmd->cmd_to_keywords[*argc_nr + 1] = ethsw_id_del; + else + return 0; + + if (*argc_nr + 2 >= argc) + return 0; + + if (strict_strtoul(argv[*argc_nr + 2], 10, &val) != -EINVAL) { + parsed_cmd->vid = val; + (*argc_nr) += 2; + parsed_cmd->cmd_to_keywords[*argc_nr] = ethsw_id_add_del_no; + return 1; + } + + return 0; +} + +/* Function used to match the command's pvid */ +static int keyword_match_pvid(enum ethsw_keyword_id key_id, int argc, + char *const argv[], int *argc_nr, + struct ethsw_command_def *parsed_cmd) +{ + unsigned long val; + + if (!keyword_match_gen(key_id, argc, argv, argc_nr, parsed_cmd)) + return 0; + + if (*argc_nr + 1 >= argc) + return 1; + + if (strict_strtoul(argv[*argc_nr + 1], 10, &val) != -EINVAL) { + parsed_cmd->vid = val; + (*argc_nr)++; + parsed_cmd->cmd_to_keywords[*argc_nr] = ethsw_id_pvid_no; + } + + return 1; +} + +/* Function used to match the command's MAC address */ +static int keyword_match_mac_addr(enum ethsw_keyword_id key_id, int argc, + char *const argv[], int *argc_nr, + struct ethsw_command_def *parsed_cmd) +{ + if (!keyword_match_gen(key_id, argc, argv, argc_nr, parsed_cmd)) + return 0; + + if ((*argc_nr + 1 >= argc) || + !is_broadcast_ethaddr(parsed_cmd->ethaddr)) + return 1; + + if (eth_validate_ethaddr_str(argv[*argc_nr + 1])) { + printf("Invalid MAC address: %s\n", argv[*argc_nr + 1]); + return 0; + } + + eth_parse_enetaddr(argv[*argc_nr + 1], parsed_cmd->ethaddr); + + if (is_broadcast_ethaddr(parsed_cmd->ethaddr)) { + memset(parsed_cmd->ethaddr, 0xFF, sizeof(parsed_cmd->ethaddr)); + return 0; + } + + parsed_cmd->cmd_to_keywords[*argc_nr + 1] = ethsw_id_add_del_mac; + + return 1; +} + +/* Finds optional keywords and modifies *argc_va to skip them */ +static void cmd_keywords_opt_check(const struct ethsw_command_def *parsed_cmd, + int *argc_val) +{ + int i; + int keyw_opt_matched; + int argc_val_max; + int const *cmd_keyw_p; + int const *cmd_keyw_opt_p; + + /* remember the best match */ + argc_val_max = *argc_val; + + /* + * check if our command's optional keywords match the optional + * keywords of an available command + */ + for (i = 0; i < ARRAY_SIZE(ethsw_cmd_def); i++) { + keyw_opt_matched = 0; + cmd_keyw_p = &parsed_cmd->cmd_to_keywords[keyw_opt_matched]; + cmd_keyw_opt_p = &cmd_opt_def[i].cmd_keyword[keyw_opt_matched]; + + /* + * increase the number of keywords that + * matched with a command + */ + while (keyw_opt_matched + *argc_val < + parsed_cmd->cmd_keywords_nr && + *cmd_keyw_opt_p != ethsw_id_key_end && + *(cmd_keyw_p + *argc_val) == *cmd_keyw_opt_p) { + keyw_opt_matched++; + cmd_keyw_p++; + cmd_keyw_opt_p++; + } + + /* + * if all our optional command's keywords perfectly match an + * optional pattern, then we can move to the next defined + * keywords in our command; remember the one that matched the + * greatest number of keywords + */ + if (keyw_opt_matched + *argc_val <= + parsed_cmd->cmd_keywords_nr && + *cmd_keyw_opt_p == ethsw_id_key_end && + *argc_val + keyw_opt_matched > argc_val_max) + argc_val_max = *argc_val + keyw_opt_matched; + } + + *argc_val = argc_val_max; +} + +/* + * Finds the function to call based on keywords and + * modifies *argc_va to skip them + */ +static void cmd_keywords_check(struct ethsw_command_def *parsed_cmd, + int *argc_val) +{ + int i; + int keyw_matched; + int *cmd_keyw_p; + int *cmd_keyw_def_p; + + /* + * check if our command's keywords match the + * keywords of an available command + */ + for (i = 0; i < ARRAY_SIZE(ethsw_cmd_def); i++) { + keyw_matched = 0; + cmd_keyw_p = &parsed_cmd->cmd_to_keywords[keyw_matched]; + cmd_keyw_def_p = ðsw_cmd_def[i].cmd_keyword[keyw_matched]; + + /* + * increase the number of keywords that + * matched with a command + */ + while (keyw_matched + *argc_val < parsed_cmd->cmd_keywords_nr && + *cmd_keyw_def_p != ethsw_id_key_end && + *(cmd_keyw_p + *argc_val) == *cmd_keyw_def_p) { + keyw_matched++; + cmd_keyw_p++; + cmd_keyw_def_p++; + } + + /* + * if all our command's keywords perfectly match an + * available command, then we get the function we need to call + * to configure the Ethernet Switch + */ + if (keyw_matched && keyw_matched + *argc_val == + parsed_cmd->cmd_keywords_nr && + *cmd_keyw_def_p == ethsw_id_key_end) { + *argc_val += keyw_matched; + parsed_cmd->cmd_function = + ethsw_cmd_def[i].keyword_function; + return; + } + } +} + +/* find all the keywords in the command */ +static int keywords_find(int argc, char * const argv[], + struct ethsw_command_def *parsed_cmd) +{ + int i; + int j; + int argc_val; + int rc = CMD_RET_SUCCESS; + + for (i = 1; i < argc; i++) { + for (j = 0; j < ethsw_id_count; j++) { + if (keyword[j].match(j, argc, argv, &i, parsed_cmd)) + break; + } + } + + /* if there is no keyword match for a word, the command is invalid */ + for (i = 1; i < argc; i++) + if (parsed_cmd->cmd_to_keywords[i] == ethsw_id_key_end) + rc = CMD_RET_USAGE; + + parsed_cmd->cmd_keywords_nr = argc; + argc_val = 1; + + /* get optional parameters first */ + cmd_keywords_opt_check(parsed_cmd, &argc_val); + + if (argc_val == parsed_cmd->cmd_keywords_nr) + return CMD_RET_USAGE; + + /* + * check the keywords and if a match is found, + * get the function to call + */ + cmd_keywords_check(parsed_cmd, &argc_val); + + /* error if not all commands' parameters were matched */ + if (argc_val == parsed_cmd->cmd_keywords_nr) { + if (!parsed_cmd->cmd_function) { + printf("Command not available for: %s\n", ethsw_name); + rc = CMD_RET_FAILURE; + } + } else { + rc = CMD_RET_USAGE; + } + + return rc; +} + +static void command_def_init(struct ethsw_command_def *parsed_cmd) +{ + int i; + + for (i = 0; i < ETHSW_MAX_CMD_PARAMS; i++) + parsed_cmd->cmd_to_keywords[i] = ethsw_id_key_end; + + parsed_cmd->port = ETHSW_CMD_PORT_ALL; + parsed_cmd->vid = ETHSW_CMD_VLAN_ALL; + parsed_cmd->cmd_function = NULL; + + /* We initialize the MAC address with the Broadcast address */ + memset(parsed_cmd->ethaddr, 0xff, sizeof(parsed_cmd->ethaddr)); +} + +/* function to interpret commands starting with "ethsw " */ +static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct ethsw_command_def parsed_cmd; + int rc = CMD_RET_SUCCESS; + + if (argc == 1 || argc >= ETHSW_MAX_CMD_PARAMS) + return CMD_RET_USAGE; + + command_def_init(&parsed_cmd); + + rc = keywords_find(argc, argv, &parsed_cmd); + + if (rc == CMD_RET_SUCCESS) + rc = parsed_cmd.cmd_function(&parsed_cmd); + + return rc; +} + +#define ETHSW_PORT_CONF_HELP "[port <port_no>] { enable | disable | show } " \ +"- enable/disable a port; show shows a port's configuration" + +U_BOOT_CMD(ethsw, ETHSW_MAX_CMD_PARAMS, 0, do_ethsw, + "Ethernet l2 switch commands", + ETHSW_PORT_CONF_HELP"\n" + ETHSW_PORT_STATS_HELP"\n" + ETHSW_LEARN_HELP"\n" + ETHSW_FDB_HELP"\n" + ETHSW_PVID_HELP"\n" + ETHSW_VLAN_HELP"\n" + ETHSW_PORT_UNTAG_HELP"\n" + ETHSW_EGR_VLAN_TAG_HELP"\n" + ETHSW_VLAN_FDB_HELP"\n" + ETHSW_PORT_INGR_FLTR_HELP"\n" +); diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c index 10eea65570..0460b4cc56 100644 --- a/common/cmd_ubi.c +++ b/common/cmd_ubi.c @@ -14,7 +14,7 @@ #include <common.h> #include <command.h> #include <exports.h> - +#include <memalign.h> #include <nand.h> #include <onenand_uboot.h> #include <linux/mtd/mtd.h> diff --git a/common/cmd_usb.c b/common/cmd_usb.c index 6874af7547..6bdbbc5c05 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -14,6 +14,7 @@ #include <common.h> #include <command.h> #include <dm.h> +#include <memalign.h> #include <asm/byteorder.h> #include <asm/unaligned.h> #include <part.h> diff --git a/common/env_eeprom.c b/common/env_eeprom.c index 905d39ac98..eea169d484 100644 --- a/common/env_eeprom.c +++ b/common/env_eeprom.c @@ -82,75 +82,13 @@ uchar env_get_char_spec(int index) void env_relocate_spec(void) { - char buf[CONFIG_ENV_SIZE]; + char buf_env[CONFIG_ENV_SIZE]; unsigned int off = CONFIG_ENV_OFFSET; #ifdef CONFIG_ENV_OFFSET_REDUND - if (gd->env_valid == 2) - off = CONFIG_ENV_OFFSET_REDUND; -#endif - eeprom_bus_read(CONFIG_SYS_DEF_EEPROM_ADDR, - off, (uchar *)buf, CONFIG_ENV_SIZE); - - env_import(buf, 1); -} - -int saveenv(void) -{ - env_t env_new; - int rc; - unsigned int off = CONFIG_ENV_OFFSET; -#ifdef CONFIG_ENV_OFFSET_REDUND - unsigned int off_red = CONFIG_ENV_OFFSET_REDUND; - char flag_obsolete = OBSOLETE_FLAG; -#endif - - BUG_ON(env_ptr != NULL); - - rc = env_export(&env_new); - if (rc) - return rc; - -#ifdef CONFIG_ENV_OFFSET_REDUND - if (gd->env_valid == 1) { - off = CONFIG_ENV_OFFSET_REDUND; - off_red = CONFIG_ENV_OFFSET; - } - - env_new.flags = ACTIVE_FLAG; -#endif - - rc = eeprom_bus_write(CONFIG_SYS_DEF_EEPROM_ADDR, - off, (uchar *)&env_new, CONFIG_ENV_SIZE); - -#ifdef CONFIG_ENV_OFFSET_REDUND - if (rc == 0) { - eeprom_bus_write(CONFIG_SYS_DEF_EEPROM_ADDR, - off_red + offsetof(env_t, flags), - (uchar *)&flag_obsolete, 1); - - if (gd->env_valid == 1) - gd->env_valid = 2; - else - gd->env_valid = 1; - } -#endif - return rc; -} - -/* - * Initialize Environment use - * - * We are still running from ROM, so data use is limited. - * Use a (moderately small) buffer on the stack - */ -#ifdef CONFIG_ENV_OFFSET_REDUND -int env_init(void) -{ -#ifdef ENV_IS_EMBEDDED ulong len, crc[2], crc_tmp; - unsigned int off, off_env[2]; - uchar buf[64], flags[2]; + unsigned int off_env[2]; + uchar rdbuf[64], flags[2]; int i, crc_ok[2] = {0, 0}; eeprom_init(); /* prepare for EEPROM read/write */ @@ -172,12 +110,12 @@ int env_init(void) len = ENV_SIZE; off = off_env[i] + offsetof(env_t, data); while (len > 0) { - int n = (len > sizeof(buf)) ? sizeof(buf) : len; + int n = (len > sizeof(rdbuf)) ? sizeof(rdbuf) : len; eeprom_bus_read(CONFIG_SYS_DEF_EEPROM_ADDR, off, - buf, n); + rdbuf, n); - crc_tmp = crc32(crc_tmp, buf, n); + crc_tmp = crc32(crc_tmp, rdbuf, n); len -= n; off += n; } @@ -189,8 +127,6 @@ int env_init(void) if (!crc_ok[0] && !crc_ok[1]) { gd->env_addr = 0; gd->env_valid = 0; - - return 0; } else if (crc_ok[0] && !crc_ok[1]) { gd->env_valid = 1; } else if (!crc_ok[0] && crc_ok[1]) { @@ -213,19 +149,10 @@ int env_init(void) gd->env_addr = off_env[1] + offsetof(env_t, data); else if (gd->env_valid == 1) gd->env_addr = off_env[0] + offsetof(env_t, data); -#else - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; -#endif - return 0; -} -#else -int env_init(void) -{ -#ifdef ENV_IS_EMBEDDED + +#else /* CONFIG_ENV_OFFSET_REDUND */ ulong crc, len, new; - unsigned off; - uchar buf[64]; + uchar rdbuf[64]; eeprom_init(); /* prepare for EEPROM read/write */ @@ -237,13 +164,12 @@ int env_init(void) new = 0; len = ENV_SIZE; off = offsetof(env_t, data); - while (len > 0) { - int n = (len > sizeof(buf)) ? sizeof(buf) : len; + int n = (len > sizeof(rdbuf)) ? sizeof(rdbuf) : len; eeprom_bus_read(CONFIG_SYS_DEF_EEPROM_ADDR, - CONFIG_ENV_OFFSET + off, buf, n); - new = crc32(new, buf, n); + CONFIG_ENV_OFFSET + off, rdbuf, n); + new = crc32(new, rdbuf, n); len -= n; off += n; } @@ -255,10 +181,72 @@ int env_init(void) gd->env_addr = 0; gd->env_valid = 0; } -#else +#endif /* CONFIG_ENV_OFFSET_REDUND */ + + off = CONFIG_ENV_OFFSET; +#ifdef CONFIG_ENV_OFFSET_REDUND + if (gd->env_valid == 2) + off = CONFIG_ENV_OFFSET_REDUND; +#endif + + eeprom_bus_read(CONFIG_SYS_DEF_EEPROM_ADDR, + off, (uchar *)buf_env, CONFIG_ENV_SIZE); + + env_import(buf_env, 1); +} + +int saveenv(void) +{ + env_t env_new; + int rc; + unsigned int off = CONFIG_ENV_OFFSET; +#ifdef CONFIG_ENV_OFFSET_REDUND + unsigned int off_red = CONFIG_ENV_OFFSET_REDUND; + char flag_obsolete = OBSOLETE_FLAG; +#endif + + BUG_ON(env_ptr != NULL); + + rc = env_export(&env_new); + if (rc) + return rc; + +#ifdef CONFIG_ENV_OFFSET_REDUND + if (gd->env_valid == 1) { + off = CONFIG_ENV_OFFSET_REDUND; + off_red = CONFIG_ENV_OFFSET; + } + + env_new.flags = ACTIVE_FLAG; +#endif + + rc = eeprom_bus_write(CONFIG_SYS_DEF_EEPROM_ADDR, + off, (uchar *)&env_new, CONFIG_ENV_SIZE); + +#ifdef CONFIG_ENV_OFFSET_REDUND + if (rc == 0) { + eeprom_bus_write(CONFIG_SYS_DEF_EEPROM_ADDR, + off_red + offsetof(env_t, flags), + (uchar *)&flag_obsolete, 1); + + if (gd->env_valid == 1) + gd->env_valid = 2; + else + gd->env_valid = 1; + } +#endif + return rc; +} + +/* + * Initialize Environment use + * + * We are still running from ROM, so data use is limited. + * Use a (moderately small) buffer on the stack + */ +int env_init(void) +{ gd->env_addr = (ulong)&default_environment[0]; gd->env_valid = 1; -#endif return 0; } -#endif diff --git a/common/env_fat.c b/common/env_fat.c index e4c848935a..d79d864a0c 100644 --- a/common/env_fat.c +++ b/common/env_fat.c @@ -13,6 +13,7 @@ #include <environment.h> #include <linux/stddef.h> #include <malloc.h> +#include <memalign.h> #include <search.h> #include <errno.h> #include <fat.h> diff --git a/common/env_flags.c b/common/env_flags.c index 5189f5b2dd..e682d85178 100644 --- a/common/env_flags.c +++ b/common/env_flags.c @@ -187,6 +187,31 @@ static void skip_num(int hex, const char *value, const char **end, *end = value; } +#ifdef CONFIG_CMD_NET +int eth_validate_ethaddr_str(const char *addr) +{ + const char *end; + const char *cur; + int i; + + cur = addr; + for (i = 0; i < 6; i++) { + skip_num(1, cur, &end, 2); + if (cur == end) + return -1; + if (cur + 2 == end && is_hex_prefix(cur)) + return -1; + if (i != 5 && *end != ':') + return -1; + if (i == 5 && *end != '\0') + return -1; + cur = end + 1; + } + + return 0; +} +#endif + /* * Based on the declared type enum, validate that the value string complies * with that format @@ -239,19 +264,8 @@ static int _env_flags_validate_type(const char *value, } break; case env_flags_vartype_macaddr: - cur = value; - for (i = 0; i < 6; i++) { - skip_num(1, cur, &end, 2); - if (cur == end) - return -1; - if (cur + 2 == end && is_hex_prefix(cur)) - return -1; - if (i != 5 && *end != ':') - return -1; - if (i == 5 && *end != '\0') - return -1; - cur = end + 1; - } + if (eth_validate_ethaddr_str(value)) + return -1; break; #endif case env_flags_vartype_end: diff --git a/common/env_mmc.c b/common/env_mmc.c index 51e7707cb0..96398224cc 100644 --- a/common/env_mmc.c +++ b/common/env_mmc.c @@ -12,6 +12,7 @@ #include <environment.h> #include <linux/stddef.h> #include <malloc.h> +#include <memalign.h> #include <mmc.h> #include <search.h> #include <errno.h> diff --git a/common/env_nand.c b/common/env_nand.c index 92e0e053df..b32eeac9d7 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -19,6 +19,7 @@ #include <environment.h> #include <linux/stddef.h> #include <malloc.h> +#include <memalign.h> #include <nand.h> #include <search.h> #include <errno.h> diff --git a/common/env_ubi.c b/common/env_ubi.c index 77bbfa6ef4..e0dc5af851 100644 --- a/common/env_ubi.c +++ b/common/env_ubi.c @@ -11,6 +11,7 @@ #include <environment.h> #include <errno.h> #include <malloc.h> +#include <memalign.h> #include <search.h> #include <ubi_uboot.h> #undef crc32 diff --git a/common/image-android.c b/common/image-android.c index d946c2f814..b6a94b3a30 100644 --- a/common/image-android.c +++ b/common/image-android.c @@ -130,8 +130,10 @@ ulong android_image_get_kload(const struct andr_img_hdr *hdr) int android_image_get_ramdisk(const struct andr_img_hdr *hdr, ulong *rd_data, ulong *rd_len) { - if (!hdr->ramdisk_size) + if (!hdr->ramdisk_size) { + *rd_data = *rd_len = 0; return -1; + } printf("RAM disk load addr 0x%08x size %u KiB\n", hdr->ramdisk_addr, DIV_ROUND_UP(hdr->ramdisk_size, 1024)); diff --git a/common/image.c b/common/image.c index 1325e07953..e6071099d6 100644 --- a/common/image.c +++ b/common/image.c @@ -167,6 +167,7 @@ static const table_entry_t uimage_comp[] = { { IH_COMP_GZIP, "gzip", "gzip compressed", }, { IH_COMP_LZMA, "lzma", "lzma compressed", }, { IH_COMP_LZO, "lzo", "lzo compressed", }, + { IH_COMP_LZ4, "lz4", "lz4 compressed", }, { -1, "", "", }, }; @@ -907,6 +908,15 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, *rd_start = 0; *rd_end = 0; +#ifdef CONFIG_ANDROID_BOOT_IMAGE + /* + * Look for an Android boot image. + */ + buf = map_sysmem(images->os.start, 0); + if (genimg_get_format(buf) == IMAGE_FORMAT_ANDROID) + select = argv[0]; +#endif + if (argc >= 2) select = argv[1]; diff --git a/common/malloc_simple.c b/common/malloc_simple.c index 134e059706..c74586376d 100644 --- a/common/malloc_simple.c +++ b/common/malloc_simple.c @@ -32,7 +32,7 @@ void *memalign_simple(size_t align, size_t bytes) void *ptr; addr = ALIGN(gd->malloc_base + gd->malloc_ptr, align); - new_ptr = addr + bytes; + new_ptr = addr + bytes - gd->malloc_base; if (new_ptr > gd->malloc_limit) return NULL; ptr = map_sysmem(addr, bytes); diff --git a/common/usb.c b/common/usb.c index fbaf8ecbe2..700bfc315b 100644 --- a/common/usb.c +++ b/common/usb.c @@ -29,6 +29,7 @@ #include <common.h> #include <command.h> #include <dm.h> +#include <memalign.h> #include <asm/processor.h> #include <linux/compiler.h> #include <linux/ctype.h> diff --git a/common/usb_hub.c b/common/usb_hub.c index 652a104361..415b45c1f1 100644 --- a/common/usb_hub.c +++ b/common/usb_hub.c @@ -26,6 +26,7 @@ #include <command.h> #include <dm.h> #include <errno.h> +#include <memalign.h> #include <asm/processor.h> #include <asm/unaligned.h> #include <linux/ctype.h> diff --git a/common/usb_kbd.c b/common/usb_kbd.c index 0227024441..95912f99c7 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -11,6 +11,7 @@ #include <dm.h> #include <errno.h> #include <malloc.h> +#include <memalign.h> #include <stdio_dev.h> #include <asm/byteorder.h> diff --git a/common/usb_storage.c b/common/usb_storage.c index b978430408..b390310ee3 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -39,6 +39,7 @@ #include <errno.h> #include <inttypes.h> #include <mapmem.h> +#include <memalign.h> #include <asm/byteorder.h> #include <asm/processor.h> #include <dm/device-internal.h> diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index ee219f82fd..f4ff7c502b 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -3,8 +3,8 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_EMR1=4 -CONFIG_MMC0_CD_PIN="PH1" CONFIG_SYS_CLK_FREQ=912000000 +CONFIG_MMC0_CD_PIN="PH1" CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index 560295f790..898631d963 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -2,8 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 -CONFIG_GMAC_TX_DELAY=3 CONFIG_VIDEO_COMPOSITE=y +CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y @@ -11,5 +11,6 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHC # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +CONFIG_NETCONSOLE=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index 346db34dcf..e9909d97c1 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -4,8 +4,8 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_USB1_VBUS_PIN="PH0" CONFIG_USB2_VBUS_PIN="PH1" -CONFIG_GMAC_TX_DELAY=3 CONFIG_VIDEO_COMPOSITE=y +CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y @@ -13,5 +13,6 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHC # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +CONFIG_NETCONSOLE=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index 7f1c4ebdfe..1725f65107 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -18,7 +18,7 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +CONFIG_USB_MUSB_HOST=y CONFIG_VIDEO_LCD_SPI_CS="PA0" CONFIG_VIDEO_LCD_SPI_SCLK="PA1" CONFIG_VIDEO_LCD_SPI_MOSI="PA2" -CONFIG_USB_MUSB_HOST=y diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index de448908ec..13b7ed3ddc 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y -CONFIG_DRAM_CLK=408 +CONFIG_USB1_VBUS_PIN="" +CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/M5208EVBE_defconfig b/configs/M5208EVBE_defconfig index 6a46194567..f30a7fbe33 100644 --- a/configs/M5208EVBE_defconfig +++ b/configs/M5208EVBE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5208EVBE=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M52277EVB_defconfig b/configs/M52277EVB_defconfig index 608edc5acf..ccb88236b8 100644 --- a/configs/M52277EVB_defconfig +++ b/configs/M52277EVB_defconfig @@ -1,8 +1,8 @@ CONFIG_M68K=y CONFIG_TARGET_M52277EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000" +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M5235EVB_defconfig b/configs/M5235EVB_defconfig index e9c2b7cd08..a10ae8d4d0 100644 --- a/configs/M5235EVB_defconfig +++ b/configs/M5235EVB_defconfig @@ -1,7 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M5235EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFFE00000" +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M5272C3_defconfig b/configs/M5272C3_defconfig index 6ad4e13329..6e9609f54b 100644 --- a/configs/M5272C3_defconfig +++ b/configs/M5272C3_defconfig @@ -1,6 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5272C3=y +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M5275EVB_defconfig b/configs/M5275EVB_defconfig index b29021bb5d..5eb237385a 100644 --- a/configs/M5275EVB_defconfig +++ b/configs/M5275EVB_defconfig @@ -1,6 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5275EVB=y +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M5282EVB_defconfig b/configs/M5282EVB_defconfig index 322ee9ab22..e0af3883e5 100644 --- a/configs/M5282EVB_defconfig +++ b/configs/M5282EVB_defconfig @@ -1,6 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5282EVB=y +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M53017EVB_defconfig b/configs/M53017EVB_defconfig index 3e72290432..ca538f4b01 100644 --- a/configs/M53017EVB_defconfig +++ b/configs/M53017EVB_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M53017EVB=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5329AFEE_defconfig b/configs/M5329AFEE_defconfig index 1d2bb81877..d5c6c7b2f5 100644 --- a/configs/M5329AFEE_defconfig +++ b/configs/M5329AFEE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5329EVB=y CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=0" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5329BFEE_defconfig b/configs/M5329BFEE_defconfig index 915734c412..35242060ba 100644 --- a/configs/M5329BFEE_defconfig +++ b/configs/M5329BFEE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5329EVB=y CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5373EVB_defconfig b/configs/M5373EVB_defconfig index eb7a96a47a..2fdff5bd12 100644 --- a/configs/M5373EVB_defconfig +++ b/configs/M5373EVB_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5373EVB=y CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M54418TWR_defconfig b/configs/M54418TWR_defconfig index a5c35d1f2b..bc47ed6840 100644 --- a/configs/M54418TWR_defconfig +++ b/configs/M54418TWR_defconfig @@ -1,10 +1,10 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M54418TWR_nand_mii_defconfig b/configs/M54418TWR_nand_mii_defconfig index 20eadcf574..949be9aaaa 100644 --- a/configs/M54418TWR_nand_mii_defconfig +++ b/configs/M54418TWR_nand_mii_defconfig @@ -1,10 +1,10 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000" +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M54418TWR_nand_rmii_defconfig b/configs/M54418TWR_nand_rmii_defconfig index d47127c14a..4035ea9bb5 100644 --- a/configs/M54418TWR_nand_rmii_defconfig +++ b/configs/M54418TWR_nand_rmii_defconfig @@ -1,10 +1,10 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M54418TWR_nand_rmii_lowfreq_defconfig b/configs/M54418TWR_nand_rmii_lowfreq_defconfig index 700745d1cb..d89a58714c 100644 --- a/configs/M54418TWR_nand_rmii_lowfreq_defconfig +++ b/configs/M54418TWR_nand_rmii_lowfreq_defconfig @@ -1,10 +1,10 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M54418TWR_serial_mii_defconfig b/configs/M54418TWR_serial_mii_defconfig index 44500848f0..cd383c286c 100644 --- a/configs/M54418TWR_serial_mii_defconfig +++ b/configs/M54418TWR_serial_mii_defconfig @@ -1,10 +1,10 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000" +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M54418TWR_serial_rmii_defconfig b/configs/M54418TWR_serial_rmii_defconfig index a5c35d1f2b..bc47ed6840 100644 --- a/configs/M54418TWR_serial_rmii_defconfig +++ b/configs/M54418TWR_serial_rmii_defconfig @@ -1,10 +1,10 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M54451EVB_defconfig b/configs/M54451EVB_defconfig index 0b446b8afa..2115263faf 100644 --- a/configs/M54451EVB_defconfig +++ b/configs/M54451EVB_defconfig @@ -1,8 +1,8 @@ CONFIG_M68K=y CONFIG_TARGET_M54451EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000" +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M54455EVB_defconfig b/configs/M54455EVB_defconfig index c7a01644c2..20bf103e1a 100644 --- a/configs/M54455EVB_defconfig +++ b/configs/M54455EVB_defconfig @@ -1,8 +1,8 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333" +CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="-> " diff --git a/configs/M5475AFE_defconfig b/configs/M5475AFE_defconfig index b29d1a6a56..11d14e6252 100644 --- a/configs/M5475AFE_defconfig +++ b/configs/M5475AFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475BFE_defconfig b/configs/M5475BFE_defconfig index e62fbf610e..24f42568ca 100644 --- a/configs/M5475BFE_defconfig +++ b/configs/M5475BFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475CFE_defconfig b/configs/M5475CFE_defconfig index 195b4e30e1..a8996014ed 100644 --- a/configs/M5475CFE_defconfig +++ b/configs/M5475CFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475DFE_defconfig b/configs/M5475DFE_defconfig index 314ced6c3a..66523cc486 100644 --- a/configs/M5475DFE_defconfig +++ b/configs/M5475DFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475EFE_defconfig b/configs/M5475EFE_defconfig index 279808f45e..410e150d5d 100644 --- a/configs/M5475EFE_defconfig +++ b/configs/M5475EFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475FFE_defconfig b/configs/M5475FFE_defconfig index a00100e24c..b590fd9763 100644 --- a/configs/M5475FFE_defconfig +++ b/configs/M5475FFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475GFE_defconfig b/configs/M5475GFE_defconfig index 1ea82a7ccf..ea41ec204d 100644 --- a/configs/M5475GFE_defconfig +++ b/configs/M5475GFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=4,SYS_DRAMSZ=64" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485AFE_defconfig b/configs/M5485AFE_defconfig index 70cfa8fc56..e3f2f9e25a 100644 --- a/configs/M5485AFE_defconfig +++ b/configs/M5485AFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485BFE_defconfig b/configs/M5485BFE_defconfig index 377b87fea4..b3ec7ae620 100644 --- a/configs/M5485BFE_defconfig +++ b/configs/M5485BFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485CFE_defconfig b/configs/M5485CFE_defconfig index faa0196101..6637fdc539 100644 --- a/configs/M5485CFE_defconfig +++ b/configs/M5485CFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485DFE_defconfig b/configs/M5485DFE_defconfig index 71a028fe7f..34dd51e957 100644 --- a/configs/M5485DFE_defconfig +++ b/configs/M5485DFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485EFE_defconfig b/configs/M5485EFE_defconfig index 784803e87d..1f5c4ea5fd 100644 --- a/configs/M5485EFE_defconfig +++ b/configs/M5485EFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485FFE_defconfig b/configs/M5485FFE_defconfig index 8a831e35e6..737411b2fc 100644 --- a/configs/M5485FFE_defconfig +++ b/configs/M5485FFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485GFE_defconfig b/configs/M5485GFE_defconfig index 00c7479c37..2def6ea9ba 100644 --- a/configs/M5485GFE_defconfig +++ b/configs/M5485GFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485HFE_defconfig b/configs/M5485HFE_defconfig index 887bd4d915..4263f40246 100644 --- a/configs/M5485HFE_defconfig +++ b/configs/M5485HFE_defconfig @@ -1,5 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="-> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8349ITXGP_defconfig b/configs/MPC8349ITXGP_defconfig index 4578b32ebe..1a85eeae79 100644 --- a/configs/MPC8349ITXGP_defconfig +++ b/configs/MPC8349ITXGP_defconfig @@ -2,5 +2,5 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349ITX=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITXGP,SYS_TEXT_BASE=0xFE000000" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="MPC8349E-mITX-GP> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8349ITX_LOWBOOT_defconfig b/configs/MPC8349ITX_LOWBOOT_defconfig index c5fbeb90e1..9aabd6a977 100644 --- a/configs/MPC8349ITX_LOWBOOT_defconfig +++ b/configs/MPC8349ITX_LOWBOOT_defconfig @@ -2,5 +2,5 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349ITX=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX,SYS_TEXT_BASE=0xFE000000" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="MPC8349E-mITX> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8349ITX_defconfig b/configs/MPC8349ITX_defconfig index a895c53ab0..a5309de49e 100644 --- a/configs/MPC8349ITX_defconfig +++ b/configs/MPC8349ITX_defconfig @@ -2,5 +2,5 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349ITX=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="MPC8349E-mITX> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index 3b8e04350b..9d667b7575 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -17,10 +17,10 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_AXP221_DLDO1_VOLT=3300 +CONFIG_USB_MUSB_HOST=y CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26" CONFIG_VIDEO_LCD_SPI_CS="PH9" CONFIG_VIDEO_LCD_SPI_SCLK="PH10" CONFIG_VIDEO_LCD_SPI_MOSI="PH11" CONFIG_VIDEO_LCD_SPI_MISO="PH12" -CONFIG_USB_MUSB_HOST=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index 31d6217cda..314f97b38c 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y -CONFIG_VIDEO_COMPOSITE=y CONFIG_USB0_VBUS_PIN="PB9" +CONFIG_VIDEO_COMPOSITE=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y diff --git a/configs/PATI_defconfig b/configs/PATI_defconfig index 6c1bf172f6..ae957320e5 100644 --- a/configs/PATI_defconfig +++ b/configs/PATI_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_5xx=y CONFIG_TARGET_PATI=y +CONFIG_SYS_PROMPT="pati=> " # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set @@ -13,4 +14,3 @@ CONFIG_TARGET_PATI=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="pati=> " diff --git a/configs/UCP1020_defconfig b/configs/UCP1020_defconfig index 6718865905..fa542866df 100644 --- a/configs/UCP1020_defconfig +++ b/configs/UCP1020_defconfig @@ -1,10 +1,10 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_UCP1020=y +CONFIG_SYS_PROMPT="B$ " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b" CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="B$ " CONFIG_NETDEVICES=y CONFIG_E1000=y diff --git a/configs/VCMA9_defconfig b/configs/VCMA9_defconfig index e9b28a8ade..927967da8d 100644 --- a/configs/VCMA9_defconfig +++ b/configs/VCMA9_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_VCMA9=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="VCMA9 # " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index 02504f9ea2..a54ad4f377 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -10,7 +10,6 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:210,up:22,lo CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" -CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y @@ -19,3 +18,4 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_HOST=y diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig new file mode 100644 index 0000000000..206fd488cc --- /dev/null +++ b/configs/Wobo_i5_defconfig @@ -0,0 +1,14 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN5I=y +CONFIG_DRAM_CLK=432 +CONFIG_MMC0_CD_PIN="PB3" +CONFIG_USB1_VBUS_PIN="PG12" +CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-wobo-i5" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_USB_EHCI_HCD=y diff --git a/configs/ac14xx_defconfig b/configs/ac14xx_defconfig index 238630e63e..608b56a8e2 100644 --- a/configs/ac14xx_defconfig +++ b/configs/ac14xx_defconfig @@ -1,5 +1,5 @@ CONFIG_PPC=y CONFIG_MPC512X=y CONFIG_TARGET_AC14XX=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="ac14xx> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/adp-ag101p_defconfig b/configs/adp-ag101p_defconfig index 92aa0bec46..4216cd76d2 100644 --- a/configs/adp-ag101p_defconfig +++ b/configs/adp-ag101p_defconfig @@ -1,4 +1,4 @@ CONFIG_NDS32=y CONFIG_TARGET_ADP_AG101P=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="NDS32 # " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/alt_defconfig b/configs/alt_defconfig index d994d78592..479b4a507a 100644 --- a/configs/alt_defconfig +++ b/configs/alt_defconfig @@ -16,6 +16,6 @@ CONFIG_TARGET_ALT=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set +CONFIG_SH_SDHI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SH_SDHI=y diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig index f1ff65fa83..6b1a554bd7 100644 --- a/configs/am335x_boneblack_defconfig +++ b/configs/am335x_boneblack_defconfig @@ -7,5 +7,5 @@ CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y CONFIG_DFU_TFTP=y +CONFIG_SPI_FLASH=y diff --git a/configs/am335x_gp_evm_defconfig b/configs/am335x_gp_evm_defconfig index 62d3b6b4d4..65c7b90283 100644 --- a/configs/am335x_gp_evm_defconfig +++ b/configs/am335x_gp_evm_defconfig @@ -9,6 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_SPI_FLASH=y CONFIG_RSA=y diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig new file mode 100644 index 0000000000..608804cdda --- /dev/null +++ b/configs/am335x_sl50_defconfig @@ -0,0 +1,9 @@ +CONFIG_ARM=y +CONFIG_TARGET_AM335X_SL50=y +CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/am3517_crane_defconfig b/configs/am3517_crane_defconfig index 806dc3a041..48a184f20a 100644 --- a/configs/am3517_crane_defconfig +++ b/configs/am3517_crane_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_AM3517_CRANE=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="AM3517_CRANE # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set @@ -9,4 +10,3 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="AM3517_CRANE # " diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 95b67545fe..8857b9f367 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -3,9 +3,9 @@ CONFIG_OMAP34XX=y CONFIG_TARGET_AM3517_EVM=y CONFIG_SPL=y CONFIG_FIT=y +CONFIG_SYS_PROMPT="AM3517_EVM # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="AM3517_EVM # " diff --git a/configs/amcore_defconfig b/configs/amcore_defconfig index dc16d5bb1d..ad69f0a23f 100644 --- a/configs/amcore_defconfig +++ b/configs/amcore_defconfig @@ -1,9 +1,9 @@ CONFIG_M68K=y CONFIG_TARGET_AMCORE=y +CONFIG_SYS_PROMPT="amcore $ " # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="amcore $ " diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index c0830dbd49..8971d29f10 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -1,17 +1,17 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA30=y CONFIG_TARGET_APALIS_T30=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-apalis" +CONFIG_SYS_PROMPT="Apalis T30 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Apalis T30 # " diff --git a/configs/apf27_defconfig b/configs/apf27_defconfig index 4503235c12..3a7a8c169d 100644 --- a/configs/apf27_defconfig +++ b/configs/apf27_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_APF27=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="BIOS> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_SYS_PROMPT="BIOS> " diff --git a/configs/arcangel4-be_defconfig b/configs/arcangel4-be_defconfig index 7335aac5a9..4c6fcb02e2 100644 --- a/configs/arcangel4-be_defconfig +++ b/configs/arcangel4-be_defconfig @@ -1,6 +1,7 @@ CONFIG_ARC=y CONFIG_CPU_BIG_ENDIAN=y CONFIG_TARGET_ARCANGEL4=y +CONFIG_DM_SERIAL=y CONFIG_SYS_CLK_FREQ=70000000 CONFIG_SYS_TEXT_BASE=0x81000000 CONFIG_DEFAULT_DEVICE_TREE="arcangel4" @@ -10,5 +11,4 @@ CONFIG_DEFAULT_DEVICE_TREE="arcangel4" CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DM=y -CONFIG_DM_SERIAL=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/arcangel4_defconfig b/configs/arcangel4_defconfig index cd9aafdb30..2157e0cc33 100644 --- a/configs/arcangel4_defconfig +++ b/configs/arcangel4_defconfig @@ -1,14 +1,14 @@ CONFIG_ARC=y CONFIG_TARGET_ARCANGEL4=y +CONFIG_DM_SERIAL=y CONFIG_SYS_CLK_FREQ=70000000 CONFIG_SYS_TEXT_BASE=0x81000000 CONFIG_DEFAULT_DEVICE_TREE="arcangel4" +CONFIG_SYS_PROMPT="arcangel4# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DM=y -CONFIG_DM_SERIAL=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="arcangel4# " diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index 3a1049f8a9..6cc6642a45 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -1,12 +1,13 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ARNDALE=y +CONFIG_DM_I2C=y CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale" CONFIG_SPL=y +CONFIG_SYS_PROMPT="ARNDALE # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_SOUND=y -CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y CONFIG_SOUND=y CONFIG_I2S=y @@ -15,4 +16,3 @@ CONFIG_SOUND_MAX98095=y CONFIG_SOUND_WM8994=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_SYS_PROMPT="ARNDALE # " diff --git a/configs/astro_mcf5373l_defconfig b/configs/astro_mcf5373l_defconfig index 867612070a..f787bb76ba 100644 --- a/configs/astro_mcf5373l_defconfig +++ b/configs/astro_mcf5373l_defconfig @@ -1,6 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_ASTRO_MCF5373L=y +CONFIG_SYS_PROMPT="URMEL > " # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="URMEL > " diff --git a/configs/at91rm9200ek_defconfig b/configs/at91rm9200ek_defconfig index 10df5f8d1d..e743b53209 100644 --- a/configs/at91rm9200ek_defconfig +++ b/configs/at91rm9200ek_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91RM9200EK=y +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91rm9200ek_ram_defconfig b/configs/at91rm9200ek_ram_defconfig index 2765e9dc6a..2043923f4b 100644 --- a/configs/at91rm9200ek_ram_defconfig +++ b/configs/at91rm9200ek_ram_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91RM9200EK=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9260ek_dataflash_cs0_defconfig b/configs/at91sam9260ek_dataflash_cs0_defconfig index 9909bc8d38..3c52fef02d 100644 --- a/configs/at91sam9260ek_dataflash_cs0_defconfig +++ b/configs/at91sam9260ek_dataflash_cs0_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS0" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS0" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9260ek_dataflash_cs1_defconfig b/configs/at91sam9260ek_dataflash_cs1_defconfig index 8fdbd88232..3b9849355a 100644 --- a/configs/at91sam9260ek_dataflash_cs1_defconfig +++ b/configs/at91sam9260ek_dataflash_cs1_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS1" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS1" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9260ek_nandflash_defconfig b/configs/at91sam9260ek_nandflash_defconfig index e4fc8d705e..0eac59bc9f 100644 --- a/configs/at91sam9260ek_nandflash_defconfig +++ b/configs/at91sam9260ek_nandflash_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_NANDFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_NANDFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9261ek_dataflash_cs0_defconfig b/configs/at91sam9261ek_dataflash_cs0_defconfig index e182f7065d..b902f60fe2 100644 --- a/configs/at91sam9261ek_dataflash_cs0_defconfig +++ b/configs/at91sam9261ek_dataflash_cs0_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS0" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS0" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig index b3a35dd04e..c370ae737d 100644 --- a/configs/at91sam9261ek_dataflash_cs3_defconfig +++ b/configs/at91sam9261ek_dataflash_cs3_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS3" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS3" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig index 58aa38f3cb..d7a98c6905 100644 --- a/configs/at91sam9261ek_nandflash_defconfig +++ b/configs/at91sam9261ek_nandflash_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_NANDFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_NANDFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig index 82e1b86220..f2edb9f750 100644 --- a/configs/at91sam9263ek_dataflash_cs0_defconfig +++ b/configs/at91sam9263ek_dataflash_cs0_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9263EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9263ek_dataflash_defconfig b/configs/at91sam9263ek_dataflash_defconfig index 82e1b86220..f2edb9f750 100644 --- a/configs/at91sam9263ek_dataflash_defconfig +++ b/configs/at91sam9263ek_dataflash_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9263EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig index bac882eec8..c69e740793 100644 --- a/configs/at91sam9263ek_nandflash_defconfig +++ b/configs/at91sam9263ek_nandflash_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9263EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9263ek_norflash_boot_defconfig b/configs/at91sam9263ek_norflash_boot_defconfig index 75f0ec6f1d..b5cd0da4c3 100644 --- a/configs/at91sam9263ek_norflash_boot_defconfig +++ b/configs/at91sam9263ek_norflash_boot_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9263EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_BOOT_NORFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_BOOT_NORFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9263ek_norflash_defconfig b/configs/at91sam9263ek_norflash_defconfig index 5bcdab055e..790fcc2a6c 100644 --- a/configs/at91sam9263ek_norflash_defconfig +++ b/configs/at91sam9263ek_norflash_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9263EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NORFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NORFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9g10ek_dataflash_cs0_defconfig b/configs/at91sam9g10ek_dataflash_cs0_defconfig index 80e6a8a7f3..a18d776892 100644 --- a/configs/at91sam9g10ek_dataflash_cs0_defconfig +++ b/configs/at91sam9g10ek_dataflash_cs0_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS0" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS0" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9g10ek_dataflash_cs3_defconfig b/configs/at91sam9g10ek_dataflash_cs3_defconfig index e6c9f61e00..7c4a62ca09 100644 --- a/configs/at91sam9g10ek_dataflash_cs3_defconfig +++ b/configs/at91sam9g10ek_dataflash_cs3_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS3" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS3" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig index 0adaf11325..98a14f4a0f 100644 --- a/configs/at91sam9g10ek_nandflash_defconfig +++ b/configs/at91sam9g10ek_nandflash_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_NANDFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_NANDFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9g20ek_2mmc_defconfig b/configs/at91sam9g20ek_2mmc_defconfig index 40cd6b1ca7..4c669f4769 100644 --- a/configs/at91sam9g20ek_2mmc_defconfig +++ b/configs/at91sam9g20ek_2mmc_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_MMC" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_MMC" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9g20ek_2mmc_nandflash_defconfig b/configs/at91sam9g20ek_2mmc_nandflash_defconfig index 6f593050d5..8c39f19a32 100644 --- a/configs/at91sam9g20ek_2mmc_nandflash_defconfig +++ b/configs/at91sam9g20ek_2mmc_nandflash_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9g20ek_dataflash_cs0_defconfig b/configs/at91sam9g20ek_dataflash_cs0_defconfig index b63c6d659c..ed2cbf9c57 100644 --- a/configs/at91sam9g20ek_dataflash_cs0_defconfig +++ b/configs/at91sam9g20ek_dataflash_cs0_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS0" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS0" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9g20ek_dataflash_cs1_defconfig b/configs/at91sam9g20ek_dataflash_cs1_defconfig index aad9c1ec98..06d52de52b 100644 --- a/configs/at91sam9g20ek_dataflash_cs1_defconfig +++ b/configs/at91sam9g20ek_dataflash_cs1_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS1" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS1" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9g20ek_nandflash_defconfig b/configs/at91sam9g20ek_nandflash_defconfig index f24708471b..8bc3feeb5f 100644 --- a/configs/at91sam9g20ek_nandflash_defconfig +++ b/configs/at91sam9g20ek_nandflash_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9m10g45ek_mmc_defconfig b/configs/at91sam9m10g45ek_mmc_defconfig index f88b48b6dc..6e4e6a4dd2 100644 --- a/configs/at91sam9m10g45ek_mmc_defconfig +++ b/configs/at91sam9m10g45ek_mmc_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9M10G45EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -10,4 +11,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9m10g45ek_nandflash_defconfig b/configs/at91sam9m10g45ek_nandflash_defconfig index 7675f52410..825129c84d 100644 --- a/configs/at91sam9m10g45ek_nandflash_defconfig +++ b/configs/at91sam9m10g45ek_nandflash_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9M10G45EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -10,4 +11,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig index 1702a32788..7c2af16a27 100644 --- a/configs/at91sam9n12ek_mmc_defconfig +++ b/configs/at91sam9n12ek_mmc_defconfig @@ -2,9 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9N12EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_MMC" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig index 9f87469cd3..3aa3cb153c 100644 --- a/configs/at91sam9n12ek_nandflash_defconfig +++ b/configs/at91sam9n12ek_nandflash_defconfig @@ -3,9 +3,9 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9N12EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_NANDFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig index a7d05810a0..b01fdc1877 100644 --- a/configs/at91sam9n12ek_spiflash_defconfig +++ b/configs/at91sam9n12ek_spiflash_defconfig @@ -3,9 +3,9 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9N12EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9rlek_dataflash_defconfig b/configs/at91sam9rlek_dataflash_defconfig index ed2f5d2c46..e1ca59d888 100644 --- a/configs/at91sam9rlek_dataflash_defconfig +++ b/configs/at91sam9rlek_dataflash_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9RLEK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_DATAFLASH" CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -12,4 +13,3 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig index 760cf9299f..7202997581 100644 --- a/configs/at91sam9rlek_mmc_defconfig +++ b/configs/at91sam9rlek_mmc_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9RLEK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_MMC" CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -12,4 +13,3 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig index 191a26133f..220f95f6b5 100644 --- a/configs/at91sam9rlek_nandflash_defconfig +++ b/configs/at91sam9rlek_nandflash_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9RLEK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_NANDFLASH" CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -12,4 +13,3 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig index 38607d00eb..998f11d72b 100644 --- a/configs/at91sam9x5ek_dataflash_defconfig +++ b/configs/at91sam9x5ek_dataflash_defconfig @@ -2,10 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_DATAFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig index 8776627077..78b73cffc6 100644 --- a/configs/at91sam9x5ek_mmc_defconfig +++ b/configs/at91sam9x5ek_mmc_defconfig @@ -2,10 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_MMC" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig index cedc56008c..d1a8c6c29d 100644 --- a/configs/at91sam9x5ek_nandflash_defconfig +++ b/configs/at91sam9x5ek_nandflash_defconfig @@ -3,10 +3,10 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NANDFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig index 3896300294..51b7e05370 100644 --- a/configs/at91sam9x5ek_spiflash_defconfig +++ b/configs/at91sam9x5ek_spiflash_defconfig @@ -3,10 +3,10 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_SPIFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9xeek_dataflash_cs0_defconfig b/configs/at91sam9xeek_dataflash_cs0_defconfig index fbdb564bb4..14e49bcd9a 100644 --- a/configs/at91sam9xeek_dataflash_cs0_defconfig +++ b/configs/at91sam9xeek_dataflash_cs0_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS0" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS0" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9xeek_dataflash_cs1_defconfig b/configs/at91sam9xeek_dataflash_cs1_defconfig index 4f0cc11966..d04c6e63ca 100644 --- a/configs/at91sam9xeek_dataflash_cs1_defconfig +++ b/configs/at91sam9xeek_dataflash_cs1_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS1" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS1" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/at91sam9xeek_nandflash_defconfig b/configs/at91sam9xeek_nandflash_defconfig index 3dde55c324..795e1c2536 100644 --- a/configs/at91sam9xeek_nandflash_defconfig +++ b/configs/at91sam9xeek_nandflash_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_NANDFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_NANDFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/atngw100_defconfig b/configs/atngw100_defconfig index 51facf72e6..043f6bf9d3 100644 --- a/configs/atngw100_defconfig +++ b/configs/atngw100_defconfig @@ -1,5 +1,6 @@ CONFIG_AVR32=y CONFIG_TARGET_ATNGW100=y +CONFIG_SYS_PROMPT="U-Boot> " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" @@ -9,4 +10,3 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/atngw100mkii_defconfig b/configs/atngw100mkii_defconfig index b7099f5c81..c8d910715d 100644 --- a/configs/atngw100mkii_defconfig +++ b/configs/atngw100mkii_defconfig @@ -1,5 +1,6 @@ CONFIG_AVR32=y CONFIG_TARGET_ATNGW100MKII=y +CONFIG_SYS_PROMPT="U-Boot> " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" @@ -8,4 +9,3 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/atstk1002_defconfig b/configs/atstk1002_defconfig index 78e2256151..d525868e81 100644 --- a/configs/atstk1002_defconfig +++ b/configs/atstk1002_defconfig @@ -1,5 +1,6 @@ CONFIG_AVR32=y CONFIG_TARGET_ATSTK1002=y +CONFIG_SYS_PROMPT="U-Boot> " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" @@ -8,4 +9,3 @@ CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/balloon3_defconfig b/configs/balloon3_defconfig deleted file mode 100644 index bf524ce868..0000000000 --- a/configs/balloon3_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_BALLOON3=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set diff --git a/configs/bayleybay_defconfig b/configs/bayleybay_defconfig index 2ea30c8227..56316eeda1 100644 --- a/configs/bayleybay_defconfig +++ b/configs/bayleybay_defconfig @@ -18,15 +18,15 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y CONFIG_CPU=y -CONFIG_DM_PCI=y CONFIG_SPI_FLASH=y CONFIG_DM_ETH=y CONFIG_E1000=y +CONFIG_DM_PCI=y +CONFIG_DM_RTC=y +CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_VIDEO_VESA=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11A=y -CONFIG_USB=y -CONFIG_DM_USB=y -CONFIG_DM_RTC=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 02e19d29bc..4a6f6e461a 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -1,17 +1,17 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA30=y CONFIG_TARGET_BEAVER=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-beaver" +CONFIG_SYS_PROMPT="Tegra30 (Beaver) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra30 (Beaver) # " diff --git a/configs/bf537-minotaur_defconfig b/configs/bf537-minotaur_defconfig index 212f2bb41f..f71af52fd9 100644 --- a/configs/bf537-minotaur_defconfig +++ b/configs/bf537-minotaur_defconfig @@ -1,8 +1,8 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_MINOTAUR=y +CONFIG_SYS_PROMPT="minotaur> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="minotaur> " diff --git a/configs/bf537-srv1_defconfig b/configs/bf537-srv1_defconfig index 52abf99980..3db74004a2 100644 --- a/configs/bf537-srv1_defconfig +++ b/configs/bf537-srv1_defconfig @@ -1,8 +1,8 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_SRV1=y +CONFIG_SYS_PROMPT="srv1> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="srv1> " diff --git a/configs/bf561-acvilon_defconfig b/configs/bf561-acvilon_defconfig index 1409901173..c546421be8 100644 --- a/configs/bf561-acvilon_defconfig +++ b/configs/bf561-acvilon_defconfig @@ -1,9 +1,9 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF561_ACVILON=y +CONFIG_SYS_PROMPT="Acvilon> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y -CONFIG_SYS_PROMPT="Acvilon> " diff --git a/configs/br4_defconfig b/configs/br4_defconfig index 540dbef3dc..5a680a0a59 100644 --- a/configs/br4_defconfig +++ b/configs/br4_defconfig @@ -1,9 +1,9 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BR4=y +CONFIG_SYS_PROMPT="br4>" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y -CONFIG_SYS_PROMPT="br4>" diff --git a/configs/cairo_defconfig b/configs/cairo_defconfig index 756457c26e..b1df103b9e 100644 --- a/configs/cairo_defconfig +++ b/configs/cairo_defconfig @@ -2,9 +2,9 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_CAIRO=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="Cairo # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_NET is not set -CONFIG_SYS_PROMPT="Cairo # " diff --git a/configs/calimain_defconfig b/configs/calimain_defconfig index 4d952cdafe..271b556f59 100644 --- a/configs/calimain_defconfig +++ b/configs/calimain_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_CALIMAIN=y +CONFIG_SYS_PROMPT="Calimain > " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR="\x0b" # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="Calimain > " diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index 5c298d7cf9..722bbeb446 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -1,17 +1,17 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA30=y CONFIG_TARGET_CARDHU=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-cardhu" +CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # " diff --git a/configs/cgtqmx6qeval_defconfig b/configs/cgtqmx6qeval_defconfig index 0289a3fd4d..fdbcc22c5d 100644 --- a/configs/cgtqmx6qeval_defconfig +++ b/configs/cgtqmx6qeval_defconfig @@ -2,9 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_CGTQMX6EVAL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/congatec/cgtqmx6eval/imximage.cfg,MX6Q" +CONFIG_SYS_PROMPT="CGT-QMX6-Quad U-Boot > " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CGT-QMX6-Quad U-Boot > " CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig index 389dfd2c60..3ded392ac1 100644 --- a/configs/chromebook_jerry_defconfig +++ b/configs/chromebook_jerry_defconfig @@ -11,33 +11,31 @@ CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_SPL_OF_CONTROL=y -CONFIG_CLK=y -CONFIG_SPL_CLK=y CONFIG_REGMAP=y CONFIG_SYSCON=y -CONFIG_RESET=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_LED=y CONFIG_SPL_LED=y CONFIG_LED_GPIO=y -CONFIG_DEBUG_UART=y -CONFIG_DEBUG_UART_BASE=0xff690000 -CONFIG_DEBUG_UART_CLOCK=24000000 -CONFIG_DEBUG_UART_SHIFT=2 -CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_RESET=y +CONFIG_DM_MMC=y +CONFIG_ROCKCHIP_DWMMC=y CONFIG_PINCTRL=y -CONFIG_PINCTRL_SIMPLE=y CONFIG_SPL_PINCTRL=y -CONFIG_SPL_PINCTRL_SIMPLE=y CONFIG_ROCKCHIP_PINCTRL=y -CONFIG_ROCKCHIP_GPIO=y CONFIG_DM_PMIC=y CONFIG_PMIC_ACT8846=y CONFIG_DM_REGULATOR=y CONFIG_REGULATOR_ACT8846=y CONFIG_RAM=y CONFIG_SPL_RAM=y -CONFIG_DM_MMC=y -CONFIG_ROCKCHIP_DWMMC=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_BASE=0xff690000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART_SHIFT=2 CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_CMD_DHRYSTONE=y CONFIG_ERRNO_STR=y diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig index 985573667a..21e85f3c66 100644 --- a/configs/chromebook_link_defconfig +++ b/configs/chromebook_link_defconfig @@ -1,4 +1,5 @@ CONFIG_X86=y +CONFIG_SYS_MALLOC_F_LEN=0x1800 CONFIG_VENDOR_GOOGLE=y CONFIG_DEFAULT_DEVICE_TREE="chromebook_link" CONFIG_TARGET_CHROMEBOOK_LINK=y @@ -14,17 +15,17 @@ CONFIG_CMD_BOOTSTAGE=y CONFIG_CMD_TPM=y CONFIG_CMD_TPM_TEST=y CONFIG_OF_CONTROL=y -CONFIG_DM_PCI=y -CONFIG_SPI_FLASH=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y CONFIG_CROS_EC_LPC=y +CONFIG_SPI_FLASH=y +CONFIG_DM_PCI=y +CONFIG_DM_RTC=y CONFIG_DM_TPM=y CONFIG_TPM_TIS_LPC=y CONFIG_VIDEO_VESA=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11A=y -CONFIG_DM_RTC=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y CONFIG_TPM=y diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig index c75b20d24d..70a22a907b 100644 --- a/configs/chromebox_panther_defconfig +++ b/configs/chromebox_panther_defconfig @@ -14,17 +14,17 @@ CONFIG_CMD_BOOTSTAGE=y CONFIG_CMD_TPM=y CONFIG_CMD_TPM_TEST=y CONFIG_OF_CONTROL=y -CONFIG_DM_PCI=y -CONFIG_SPI_FLASH=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y CONFIG_CROS_EC_LPC=y +CONFIG_SPI_FLASH=y +CONFIG_DM_PCI=y +CONFIG_DM_RTC=y CONFIG_DM_TPM=y CONFIG_TPM_TIS_LPC=y CONFIG_VIDEO_VESA=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11A=y -CONFIG_DM_RTC=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y CONFIG_TPM=y diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index b50ababa03..bcd1820d0c 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_MX6=y CONFIG_TARGET_CM_FX6=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" +CONFIG_SYS_PROMPT="CM-FX6 # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_LOADB is not set @@ -28,5 +29,4 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y -CONFIG_SYS_PROMPT="CM-FX6 # " CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig index 4f4bd0b55b..72884840e0 100644 --- a/configs/cm_t335_defconfig +++ b/configs/cm_t335_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_CM_T335=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="CM-T335 # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CM-T335 # " diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig index 1eb4250fec..d224b205ab 100644 --- a/configs/cm_t3517_defconfig +++ b/configs/cm_t3517_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_CM_T3517=y +CONFIG_SYS_PROMPT="CM-T3517 # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CM-T3517 # " diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig index 99dd2f4f54..57ab275b54 100644 --- a/configs/cm_t35_defconfig +++ b/configs/cm_t35_defconfig @@ -2,8 +2,8 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_CM_T35=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="CM-T3x # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CM-T3x # " diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index 19ac18a7f2..c0cdb4828d 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -1,10 +1,10 @@ CONFIG_ARM=y CONFIG_TARGET_CM_T43=y +CONFIG_DM_GPIO=y CONFIG_SPL=y +# CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set -# CONFIG_CMD_FLASH is not set # CONFIG_CMD_NFS is not set CONFIG_DM=y -CONFIG_DM_GPIO=y diff --git a/configs/cm_t54_defconfig b/configs/cm_t54_defconfig index fc72ffa78e..f81aac4927 100644 --- a/configs/cm_t54_defconfig +++ b/configs/cm_t54_defconfig @@ -2,8 +2,8 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_CM_T54=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="CM-T54 # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="CM-T54 # " diff --git a/configs/cobra5272_defconfig b/configs/cobra5272_defconfig index 77ad34d8fa..5cb6a802ab 100644 --- a/configs/cobra5272_defconfig +++ b/configs/cobra5272_defconfig @@ -1,6 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_COBRA5272=y +CONFIG_SYS_PROMPT="COBRA > " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="COBRA > " diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig index 0d28b062ba..5104e95c67 100644 --- a/configs/colibri_t20_defconfig +++ b/configs/colibri_t20_defconfig @@ -1,15 +1,15 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA20=y CONFIG_TARGET_COLIBRI_T20=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-colibri" +CONFIG_SYS_PROMPT="Colibri T20 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Colibri T20 # " diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index d1ed09d17f..738b041004 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -1,15 +1,15 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA30=y CONFIG_TARGET_COLIBRI_T30=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-colibri" +CONFIG_SYS_PROMPT="Colibri T30 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Colibri T30 # " diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index 74af563d94..9bc7e928e2 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y CONFIG_TARGET_COLIBRI_VF=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND" +CONFIG_SYS_PROMPT="Colibri VFxx # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_DM=y CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y -CONFIG_SYS_PROMPT="Colibri VFxx # " diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig index 54c3f2d9ea..865825876a 100644 --- a/configs/colibri_vf_dtb_defconfig +++ b/configs/colibri_vf_dtb_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_COLIBRI_VF=y CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND" +CONFIG_SYS_PROMPT="Colibri VFxx # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set @@ -9,4 +10,3 @@ CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y -CONFIG_SYS_PROMPT="Colibri VFxx # " diff --git a/configs/coreboot-x86_defconfig b/configs/coreboot-x86_defconfig index e95f96d779..438e43b466 100644 --- a/configs/coreboot-x86_defconfig +++ b/configs/coreboot-x86_defconfig @@ -12,15 +12,15 @@ CONFIG_CMD_BOOTSTAGE=y CONFIG_CMD_TPM=y CONFIG_CMD_TPM_TEST=y CONFIG_OF_CONTROL=y -CONFIG_DM_PCI=y CONFIG_SPI_FLASH=y CONFIG_DM_ETH=y CONFIG_E1000=y +CONFIG_DM_PCI=y +CONFIG_DM_RTC=y CONFIG_DM_TPM=y CONFIG_TPM_TIS_LPC=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_DM_RTC=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y CONFIG_TPM=y diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig index 1fed14e7c5..c9410dbe78 100644 --- a/configs/corvus_defconfig +++ b/configs/corvus_defconfig @@ -3,10 +3,10 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_CORVUS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/cpu9260_128M_defconfig b/configs/cpu9260_128M_defconfig deleted file mode 100644 index 187fcedaa1..0000000000 --- a/configs/cpu9260_128M_defconfig +++ /dev/null @@ -1,11 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_CPU9260=y -CONFIG_SYS_EXTRA_OPTIONS="CPU9260,CPU9260_128M" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CPU9260=> " diff --git a/configs/cpu9260_defconfig b/configs/cpu9260_defconfig deleted file mode 100644 index 4b50505311..0000000000 --- a/configs/cpu9260_defconfig +++ /dev/null @@ -1,11 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_CPU9260=y -CONFIG_SYS_EXTRA_OPTIONS="CPU9260" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CPU9260=> " diff --git a/configs/cpu9260_nand_128M_defconfig b/configs/cpu9260_nand_128M_defconfig deleted file mode 100644 index 797fb85d1f..0000000000 --- a/configs/cpu9260_nand_128M_defconfig +++ /dev/null @@ -1,11 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_CPU9260=y -CONFIG_SYS_EXTRA_OPTIONS="CPU9260,CPU9260_128M,NANDBOOT" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CPU9260=> " diff --git a/configs/cpu9260_nand_defconfig b/configs/cpu9260_nand_defconfig deleted file mode 100644 index 8d155d065b..0000000000 --- a/configs/cpu9260_nand_defconfig +++ /dev/null @@ -1,11 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_CPU9260=y -CONFIG_SYS_EXTRA_OPTIONS="CPU9260,NANDBOOT" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CPU9260=> " diff --git a/configs/cpu9G20_128M_defconfig b/configs/cpu9G20_128M_defconfig deleted file mode 100644 index 650c93446e..0000000000 --- a/configs/cpu9G20_128M_defconfig +++ /dev/null @@ -1,11 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_CPU9260=y -CONFIG_SYS_EXTRA_OPTIONS="CPU9G20,CPU9G20_128M" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CPU9G20=> " diff --git a/configs/cpu9G20_defconfig b/configs/cpu9G20_defconfig deleted file mode 100644 index 997eec54f4..0000000000 --- a/configs/cpu9G20_defconfig +++ /dev/null @@ -1,11 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_CPU9260=y -CONFIG_SYS_EXTRA_OPTIONS="CPU9G20" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CPU9G20=> " diff --git a/configs/cpu9G20_nand_128M_defconfig b/configs/cpu9G20_nand_128M_defconfig deleted file mode 100644 index 6d62732eee..0000000000 --- a/configs/cpu9G20_nand_128M_defconfig +++ /dev/null @@ -1,11 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_CPU9260=y -CONFIG_SYS_EXTRA_OPTIONS="CPU9G20,CPU9G20_128M,NANDBOOT" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CPU9G20=> " diff --git a/configs/cpu9G20_nand_defconfig b/configs/cpu9G20_nand_defconfig deleted file mode 100644 index 52f916f605..0000000000 --- a/configs/cpu9G20_nand_defconfig +++ /dev/null @@ -1,11 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_CPU9260=y -CONFIG_SYS_EXTRA_OPTIONS="CPU9G20,NANDBOOT" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="CPU9G20=> " diff --git a/configs/cpuat91_defconfig b/configs/cpuat91_defconfig deleted file mode 100644 index 10b8ad2bec..0000000000 --- a/configs/cpuat91_defconfig +++ /dev/null @@ -1,13 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_CPUAT91=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="CPUAT91=> " diff --git a/configs/cpuat91_ram_defconfig b/configs/cpuat91_ram_defconfig deleted file mode 100644 index 188c2b91f8..0000000000 --- a/configs/cpuat91_ram_defconfig +++ /dev/null @@ -1,13 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_CPUAT91=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT" -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig index f328159051..d036c05207 100644 --- a/configs/crownbay_defconfig +++ b/configs/crownbay_defconfig @@ -17,15 +17,15 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y CONFIG_CPU=y -CONFIG_DM_PCI=y CONFIG_SPI_FLASH=y CONFIG_DM_ETH=y CONFIG_E1000=y CONFIG_PCH_GBE=y -CONFIG_VIDEO_VESA=y -CONFIG_FRAMEBUFFER_SET_VESA_MODE=y +CONFIG_DM_PCI=y +CONFIG_DM_RTC=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_DM_RTC=y +CONFIG_VIDEO_VESA=y +CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig deleted file mode 100644 index d5f783f46e..0000000000 --- a/configs/d2net_v2_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_NET2BIG_V2=y -CONFIG_SYS_EXTRA_OPTIONS="D2NET_V2" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y diff --git a/configs/da830evm_defconfig b/configs/da830evm_defconfig deleted file mode 100644 index d37ede359f..0000000000 --- a/configs/da830evm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DA830EVM=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index 557c0d504d..3f2c3c87f8 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -3,8 +3,8 @@ CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DA850EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH" +CONFIG_SYS_PROMPT="U-Boot > " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig index 79b877f13b..6b0bde2e56 100644 --- a/configs/da850evm_direct_nor_defconfig +++ b/configs/da850evm_direct_nor_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DA850EVM=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH,USE_NOR,DIRECT_NOR_BOOT" +CONFIG_SYS_PROMPT="U-Boot > " # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 4c1b573716..e63a5c19e9 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -1,18 +1,18 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA114=y CONFIG_TARGET_DALMORE=y CONFIG_DEFAULT_DEVICE_TREE="tegra114-dalmore" +CONFIG_SYS_PROMPT="Tegra114 (Dalmore) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra114 (Dalmore) # " diff --git a/configs/davinci_dm355evm_defconfig b/configs/davinci_dm355evm_defconfig deleted file mode 100644 index 4513ce4c02..0000000000 --- a/configs/davinci_dm355evm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM355EVM=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM355 EVM # " diff --git a/configs/davinci_dm355leopard_defconfig b/configs/davinci_dm355leopard_defconfig deleted file mode 100644 index 7945605e16..0000000000 --- a/configs/davinci_dm355leopard_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM355LEOPARD=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM355 LEOPARD # " diff --git a/configs/davinci_dm365evm_defconfig b/configs/davinci_dm365evm_defconfig deleted file mode 100644 index 3550e75180..0000000000 --- a/configs/davinci_dm365evm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM365EVM=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM36x EVM # " diff --git a/configs/davinci_dm6467Tevm_defconfig b/configs/davinci_dm6467Tevm_defconfig deleted file mode 100644 index 3749b81ac5..0000000000 --- a/configs/davinci_dm6467Tevm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM6467EVM=y -CONFIG_SYS_EXTRA_OPTIONS="DAVINCI_DM6467TEVM,REFCLK_FREQ=33000000" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/davinci_dm6467evm_defconfig b/configs/davinci_dm6467evm_defconfig deleted file mode 100644 index b2021afddc..0000000000 --- a/configs/davinci_dm6467evm_defconfig +++ /dev/null @@ -1,10 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DM6467EVM=y -CONFIG_SYS_EXTRA_OPTIONS="REFCLK_FREQ=27000000" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DM6467 EVM > " diff --git a/configs/davinci_dvevm_defconfig b/configs/davinci_dvevm_defconfig deleted file mode 100644 index 7c6f03eaf3..0000000000 --- a/configs/davinci_dvevm_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_DVEVM=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/davinci_schmoogie_defconfig b/configs/davinci_schmoogie_defconfig deleted file mode 100644 index 2fb4d9f22e..0000000000 --- a/configs/davinci_schmoogie_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_SCHMOOGIE=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/davinci_sffsdr_defconfig b/configs/davinci_sffsdr_defconfig deleted file mode 100644 index 633b4a8185..0000000000 --- a/configs/davinci_sffsdr_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_SFFSDR=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/davinci_sonata_defconfig b/configs/davinci_sonata_defconfig deleted file mode 100644 index 697ce0622b..0000000000 --- a/configs/davinci_sonata_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_DAVINCI_SONATA=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/dbau1000_defconfig b/configs/dbau1000_defconfig index 5dc12d27ce..5ffe104cea 100644 --- a/configs/dbau1000_defconfig +++ b/configs/dbau1000_defconfig @@ -1,6 +1,7 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_SYS_EXTRA_OPTIONS="DBAU1000" +CONFIG_SYS_PROMPT="DbAu1xx0 # " # CONFIG_CMD_BDI is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set @@ -10,4 +11,3 @@ CONFIG_SYS_EXTRA_OPTIONS="DBAU1000" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="DbAu1xx0 # " diff --git a/configs/dbau1100_defconfig b/configs/dbau1100_defconfig index 522b9bcf27..84e369a7fe 100644 --- a/configs/dbau1100_defconfig +++ b/configs/dbau1100_defconfig @@ -1,6 +1,7 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1100=y +CONFIG_SYS_PROMPT="DbAu1xx0 # " # CONFIG_CMD_BDI is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set @@ -10,4 +11,3 @@ CONFIG_DBAU1100=y # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="DbAu1xx0 # " diff --git a/configs/dbau1500_defconfig b/configs/dbau1500_defconfig index 2fdddc725c..8a9583b486 100644 --- a/configs/dbau1500_defconfig +++ b/configs/dbau1500_defconfig @@ -1,6 +1,7 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1500=y +CONFIG_SYS_PROMPT="DbAu1xx0 # " # CONFIG_CMD_BDI is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set @@ -10,4 +11,3 @@ CONFIG_DBAU1500=y # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="DbAu1xx0 # " diff --git a/configs/dbau1550_defconfig b/configs/dbau1550_defconfig index 07be3f16e4..333a9223be 100644 --- a/configs/dbau1550_defconfig +++ b/configs/dbau1550_defconfig @@ -1,6 +1,7 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1550=y +CONFIG_SYS_PROMPT="DbAu1xx0 # " # CONFIG_CMD_BDI is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set @@ -8,4 +9,3 @@ CONFIG_DBAU1550=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="DbAu1xx0 # " diff --git a/configs/dbau1550_el_defconfig b/configs/dbau1550_el_defconfig index 7bd1e0c9ef..5970e43955 100644 --- a/configs/dbau1550_el_defconfig +++ b/configs/dbau1550_el_defconfig @@ -2,6 +2,7 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1550=y CONFIG_SYS_LITTLE_ENDIAN=y +CONFIG_SYS_PROMPT="DbAu1xx0 # " # CONFIG_CMD_BDI is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set @@ -9,4 +10,3 @@ CONFIG_SYS_LITTLE_ENDIAN=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="DbAu1xx0 # " diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 7246da5f1f..64652994ae 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_DEVKIT3250=y +CONFIG_DM_GPIO=y CONFIG_SPL=y # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_DM=y -CONFIG_DM_GPIO=y diff --git a/configs/dig297_defconfig b/configs/dig297_defconfig deleted file mode 100644 index 4c2c9828e5..0000000000 --- a/configs/dig297_defconfig +++ /dev/null @@ -1,10 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP34XX=y -CONFIG_TARGET_DIG297=y -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="DIG297# " diff --git a/configs/dockstar_defconfig b/configs/dockstar_defconfig index e4da4664a4..819cf1f491 100644 --- a/configs/dockstar_defconfig +++ b/configs/dockstar_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_DOCKSTAR=y +CONFIG_SYS_PROMPT="DockStar> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="DockStar> " diff --git a/configs/dra72_evm_defconfig b/configs/dra72_evm_defconfig index 3205e720ea..b5bd798d8b 100644 --- a/configs/dra72_evm_defconfig +++ b/configs/dra72_evm_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_DRA7XX_EVM=y +CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="dra72-evm" CONFIG_SPL=y CONFIG_SPL_STACK_R=y @@ -10,8 +11,6 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_OF_CONTROL=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DM=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_DM_GPIO=y diff --git a/configs/draco_defconfig b/configs/draco_defconfig index d2fc98d2a6..b5f0a50115 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_DRACO=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="U-Boot# " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" @@ -8,4 +9,3 @@ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot# " diff --git a/configs/duovero_defconfig b/configs/duovero_defconfig index d3de28a5d5..cc0e9a33cc 100644 --- a/configs/duovero_defconfig +++ b/configs/duovero_defconfig @@ -2,8 +2,8 @@ CONFIG_ARM=y CONFIG_OMAP44XX=y CONFIG_TARGET_DUOVERO=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="duovero # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="duovero # " diff --git a/configs/e2220-1170_defconfig b/configs/e2220-1170_defconfig index 72e5ab39e4..a60ba97f62 100644 --- a/configs/e2220-1170_defconfig +++ b/configs/e2220-1170_defconfig @@ -1,17 +1,15 @@ CONFIG_ARM=y CONFIG_TEGRA=y CONFIG_TEGRA210=y -CONFIG_TARGET_E2220_1170=y CONFIG_DEFAULT_DEVICE_TREE="tegra210-e2220-1170" +CONFIG_SYS_PROMPT="Tegra210 (E2220-1170) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ea20_defconfig b/configs/ea20_defconfig index 1d7494f8f9..3d5a1c44a3 100644 --- a/configs/ea20_defconfig +++ b/configs/ea20_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_EA20=y +CONFIG_SYS_PROMPT="ea20 > " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="ea20 > " diff --git a/configs/eb_cpu5282_defconfig b/configs/eb_cpu5282_defconfig index 0044de62fe..52f4a24063 100644 --- a/configs/eb_cpu5282_defconfig +++ b/configs/eb_cpu5282_defconfig @@ -1,6 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_EB_CPU5282=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFF000000,SYS_MONITOR_BASE=0xFF000400" +CONFIG_SYS_PROMPT="\nEB+CPU5282> " # CONFIG_CMD_LOADB is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="\nEB+CPU5282> " diff --git a/configs/eb_cpux9k2_defconfig b/configs/eb_cpux9k2_defconfig deleted file mode 100644 index 6a6f3cd2c2..0000000000 --- a/configs/eb_cpux9k2_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_EB_CPUX9K2=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/eb_cpux9k2_ram_defconfig b/configs/eb_cpux9k2_ram_defconfig deleted file mode 100644 index 47c2178f16..0000000000 --- a/configs/eb_cpux9k2_ram_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_EB_CPUX9K2=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT" -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/eco5pk_defconfig b/configs/eco5pk_defconfig index 8b5874da3d..759e7e9c25 100644 --- a/configs/eco5pk_defconfig +++ b/configs/eco5pk_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_ECO5PK=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="ECO5-PK # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="ECO5-PK # " diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig index b2a2506a61..d2c3f22b2c 100644 --- a/configs/edminiv2_defconfig +++ b/configs/edminiv2_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_ORION5X=y CONFIG_TARGET_EDMINIV2=y CONFIG_SPL=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="EDMiniV2> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/enbw_cmc_defconfig b/configs/enbw_cmc_defconfig deleted file mode 100644 index 90249f3772..0000000000 --- a/configs/enbw_cmc_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_DAVINCI=y -CONFIG_TARGET_ENBW_CMC=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig index d97008a3f5..2645d900b8 100644 --- a/configs/ethernut5_defconfig +++ b/configs/ethernut5_defconfig @@ -2,8 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_ETHERNUT5=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig index 5fe90b5285..edb2db2708 100644 --- a/configs/firefly-rk3288_defconfig +++ b/configs/firefly-rk3288_defconfig @@ -11,32 +11,32 @@ CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_SPL_OF_CONTROL=y -CONFIG_CLK=y -CONFIG_SPL_CLK=y CONFIG_REGMAP=y CONFIG_SYSCON=y -CONFIG_RESET=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_LED=y CONFIG_LED_GPIO=y -CONFIG_DEBUG_UART=y -CONFIG_DEBUG_UART_BASE=0xff690000 -CONFIG_DEBUG_UART_CLOCK=24000000 -CONFIG_DEBUG_UART_SHIFT=2 -CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_RESET=y +CONFIG_DM_MMC=y +CONFIG_ROCKCHIP_DWMMC=y CONFIG_PINCTRL=y -CONFIG_SPL_PINCTRL=y # CONFIG_PINCTRL_FULL is not set +CONFIG_SPL_PINCTRL=y # CONFIG_SPL_PINCTRL_FULL is not set CONFIG_ROCKCHIP_PINCTRL=y -CONFIG_ROCKCHIP_GPIO=y CONFIG_DM_PMIC=y CONFIG_PMIC_ACT8846=y CONFIG_DM_REGULATOR=y CONFIG_REGULATOR_ACT8846=y CONFIG_RAM=y CONFIG_SPL_RAM=y -CONFIG_DM_MMC=y -CONFIG_ROCKCHIP_DWMMC=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_BASE=0xff690000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART_SHIFT=2 CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_CMD_DHRYSTONE=y CONFIG_ERRNO_STR=y diff --git a/configs/flea3_defconfig b/configs/flea3_defconfig index c9e4a28d2c..05bb8b4dc8 100644 --- a/configs/flea3_defconfig +++ b/configs/flea3_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_FLEA3=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="flea3 U-Boot > " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig index 30cead75b2..30e09370e6 100644 --- a/configs/forfun_q88db_defconfig +++ b/configs/forfun_q88db_defconfig @@ -13,7 +13,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-forfun-q88db" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set diff --git a/configs/fx12mm_defconfig b/configs/fx12mm_defconfig index 02136811bc..da5df04cbc 100644 --- a/configs/fx12mm_defconfig +++ b/configs/fx12mm_defconfig @@ -2,8 +2,8 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_FX12MM=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,INIT_TLB=board/xilinx/ppc405-generic/init.o" +CONFIG_SYS_PROMPT="FX12MM:/# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="FX12MM:/# " diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index d05154ee0a..d1808a5633 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -11,8 +11,9 @@ CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y -CONFIG_NETDEVICES=y +CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_PCI=y CONFIG_DM_RTC=y diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index 059ce80d1e..3f4cd1dac2 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_GOFLEXHOME=y +CONFIG_SYS_PROMPT="GoFlexHome> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="GoFlexHome> " diff --git a/configs/gose_defconfig b/configs/gose_defconfig index 72aee1cd9c..b0dfa9011f 100644 --- a/configs/gose_defconfig +++ b/configs/gose_defconfig @@ -16,6 +16,6 @@ CONFIG_TARGET_GOSE=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set +CONFIG_SH_SDHI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SH_SDHI=y diff --git a/configs/grasshopper_defconfig b/configs/grasshopper_defconfig index eefc5f2eba..92a73e22ee 100644 --- a/configs/grasshopper_defconfig +++ b/configs/grasshopper_defconfig @@ -1,9 +1,9 @@ CONFIG_AVR32=y CONFIG_TARGET_GRASSHOPPER=y +CONFIG_SYS_PROMPT="U-Boot> " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig index 3b72dc2e6d..e9aecc39a3 100644 --- a/configs/gt90h_v4_defconfig +++ b/configs/gt90h_v4_defconfig @@ -13,7 +13,6 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" -CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-gt90h-v4" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y @@ -24,3 +23,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" CONFIG_AXP221_DCDC2_VOLT=1100 CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_USB_MUSB_HOST=y diff --git a/configs/gwventana_defconfig b/configs/gwventana_defconfig index e45b077e3a..5bb371c6c2 100644 --- a/configs/gwventana_defconfig +++ b/configs/gwventana_defconfig @@ -1,14 +1,14 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_GW_VENTANA=y +CONFIG_DM_SERIAL=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x18000000 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" +CONFIG_SYS_PROMPT="Ventana > " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_DM=y CONFIG_NETDEVICES=y CONFIG_E1000=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_PROMPT="Ventana > " diff --git a/configs/h2200_defconfig b/configs/h2200_defconfig index 07b1706f78..d112cf1012 100644 --- a/configs/h2200_defconfig +++ b/configs/h2200_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_H2200=y +CONFIG_SYS_PROMPT="> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set @@ -17,4 +18,3 @@ CONFIG_TARGET_H2200=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set -CONFIG_SYS_PROMPT="> " diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index c9c0618cf9..79e91e0e75 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -1,16 +1,16 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA20=y CONFIG_TARGET_HARMONY=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-harmony" +CONFIG_SYS_PROMPT="Tegra20 (Harmony) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra20 (Harmony) # " diff --git a/configs/hikey_defconfig b/configs/hikey_defconfig index aa4fb0dcce..70aa7085fd 100644 --- a/configs/hikey_defconfig +++ b/configs/hikey_defconfig @@ -1,5 +1,3 @@ -# 96boards HiKey CONFIG_ARM=y -CONFIG_TARGET_HIKEY=y -CONFIG_NET=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 # CONFIG_CMD_IMLS is not set diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig index b3fa890063..194ef0285c 100644 --- a/configs/ib62x0_defconfig +++ b/configs/ib62x0_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_IB62X0=y +CONFIG_SYS_PROMPT="ib62x0 => " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="ib62x0 => " diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig index 4c342904b9..af1c1fcf60 100644 --- a/configs/iconnect_defconfig +++ b/configs/iconnect_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_ICONNECT=y +CONFIG_SYS_PROMPT="iconnect => " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="iconnect => " diff --git a/configs/ima3-mx53_defconfig b/configs/ima3-mx53_defconfig deleted file mode 100644 index 1f5e3a6911..0000000000 --- a/configs/ima3-mx53_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_IMA3_MX53=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg" -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="IMA3 MX53 U-Boot > " diff --git a/configs/imx27lite_defconfig b/configs/imx27lite_defconfig deleted file mode 100644 index b02955d6c7..0000000000 --- a/configs/imx27lite_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_IMX27LITE=y -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/imx31_litekit_defconfig b/configs/imx31_litekit_defconfig deleted file mode 100644 index f10759b8aa..0000000000 --- a/configs/imx31_litekit_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_IMX31_LITEKIT=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="uboot> " diff --git a/configs/imx31_phycore_defconfig b/configs/imx31_phycore_defconfig index e801ee7325..6f3ae10d54 100644 --- a/configs/imx31_phycore_defconfig +++ b/configs/imx31_phycore_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_IMX31_PHYCORE=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="uboot> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig new file mode 100644 index 0000000000..b2ba497c47 --- /dev/null +++ b/configs/inet1_defconfig @@ -0,0 +1,22 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN4I=y +CONFIG_DRAM_CLK=432 +CONFIG_DRAM_EMR1=4 +CONFIG_USB0_VBUS_PIN="PB9" +CONFIG_USB0_VBUS_DET="PH5" +CONFIG_USB0_ID_DET="PH4" +CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:24,pclk_khz:52000,le:32,ri:287,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_POWER="PH8" +CONFIG_VIDEO_LCD_BL_EN="PH7" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +CONFIG_VIDEO_LCD_PANEL_LVDS=y +CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet1" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig index d7ddee13ff..71f9d4fbb0 100644 --- a/configs/inet97fv2_defconfig +++ b/configs/inet97fv2_defconfig @@ -10,7 +10,6 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" -CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet97fv2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y @@ -18,3 +17,4 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet98v_rev2_defconfig b/configs/inet98v_rev2_defconfig index c23245adf9..4760047651 100644 --- a/configs/inet98v_rev2_defconfig +++ b/configs/inet98v_rev2_defconfig @@ -12,7 +12,6 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:209,up:22,lo CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" -CONFIG_USB_MUSB_HOST=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-98v-rev2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y @@ -20,3 +19,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig new file mode 100644 index 0000000000..b51c367c80 --- /dev/null +++ b/configs/inet9f_rev03_defconfig @@ -0,0 +1,20 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN4I=y +CONFIG_DRAM_CLK=408 +CONFIG_DRAM_EMR1=4 +CONFIG_USB0_VBUS_PIN="PB9" +CONFIG_USB0_VBUS_DET="PH5" +CONFIG_USB0_ID_DET="PH4" +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_POWER="PH8" +CONFIG_VIDEO_LCD_BL_EN="PH7" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet9f-rev03" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_USB_MUSB_HOST=y diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig deleted file mode 100644 index f314059a80..0000000000 --- a/configs/inetspace_v2_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_NETSPACE_V2=y -CONFIG_SYS_EXTRA_OPTIONS="INETSPACE_V2" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y diff --git a/configs/integratorap_cm720t_defconfig b/configs/integratorap_cm720t_defconfig index 50c6005873..5541f8eb2e 100644 --- a/configs/integratorap_cm720t_defconfig +++ b/configs/integratorap_cm720t_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM720T=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="Integrator-AP # " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorap_cm920t_defconfig b/configs/integratorap_cm920t_defconfig index ab0cdbde47..de094b15fb 100644 --- a/configs/integratorap_cm920t_defconfig +++ b/configs/integratorap_cm920t_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM920T=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="Integrator-AP # " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorap_cm926ejs_defconfig b/configs/integratorap_cm926ejs_defconfig index 317c6d8a9e..cf75425b60 100644 --- a/configs/integratorap_cm926ejs_defconfig +++ b/configs/integratorap_cm926ejs_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM926EJ_S=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="Integrator-AP # " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorap_cm946es_defconfig b/configs/integratorap_cm946es_defconfig index 5ce1c00dc0..cd1b1c34f7 100644 --- a/configs/integratorap_cm946es_defconfig +++ b/configs/integratorap_cm946es_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM946ES=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="Integrator-AP # " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm1136_defconfig b/configs/integratorcp_cm1136_defconfig index ddd2ce7a84..292a0fbf57 100644 --- a/configs/integratorcp_cm1136_defconfig +++ b/configs/integratorcp_cm1136_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM1136=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="Integrator-CP # " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm920t_defconfig b/configs/integratorcp_cm920t_defconfig index 036b32efbf..20cd404637 100644 --- a/configs/integratorcp_cm920t_defconfig +++ b/configs/integratorcp_cm920t_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM920T=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="Integrator-CP # " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm926ejs_defconfig b/configs/integratorcp_cm926ejs_defconfig index 6fc2a849cc..1091be3124 100644 --- a/configs/integratorcp_cm926ejs_defconfig +++ b/configs/integratorcp_cm926ejs_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM926EJ_S=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="Integrator-CP # " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm946es_defconfig b/configs/integratorcp_cm946es_defconfig index e077a5e23d..a4aeba43d4 100644 --- a/configs/integratorcp_cm946es_defconfig +++ b/configs/integratorcp_cm946es_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM946ES=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="Integrator-CP # " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ipam390_defconfig b/configs/ipam390_defconfig index c416340310..a353beb812 100644 --- a/configs/ipam390_defconfig +++ b/configs/ipam390_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_IPAM390=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="U-Boot > " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index 46c38e553f..cedf63d963 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=312 +CONFIG_USB0_VBUS_PIN="PB9" CONFIG_VIDEO_COMPOSITE=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set @@ -12,4 +13,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(19)" # CONFIG_CMD_FPGA is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y -CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index 8930ebebf4..6df5c7e7bd 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -1,18 +1,18 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA124=y CONFIG_TARGET_JETSON_TK1=y CONFIG_DEFAULT_DEVICE_TREE="tegra124-jetson-tk1" +CONFIG_SYS_PROMPT="Tegra124 (Jetson TK1) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra124 (Jetson TK1) # " diff --git a/configs/jornada_defconfig b/configs/jornada_defconfig deleted file mode 100644 index 65cbc2a107..0000000000 --- a/configs/jornada_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_JORNADA=y -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -# CONFIG_CMD_MISC is not set -CONFIG_SYS_PROMPT="HP Jornada# " diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig index c4cbadd151..4637087020 100644 --- a/configs/k2e_evm_defconfig +++ b/configs/k2e_evm_defconfig @@ -2,8 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2E_EVM=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="K2E EVM # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="K2E EVM # " diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig index a604939c5e..d0a0cbf9b1 100644 --- a/configs/k2hk_evm_defconfig +++ b/configs/k2hk_evm_defconfig @@ -2,8 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2HK_EVM=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="K2HK EVM # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="K2HK EVM # " diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig index a687e0ca65..8d6bdbd19a 100644 --- a/configs/k2l_evm_defconfig +++ b/configs/k2l_evm_defconfig @@ -2,8 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2L_EVM=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="K2L EVM # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="K2L EVM # " diff --git a/configs/koelsch_defconfig b/configs/koelsch_defconfig index df49a71b96..848aa553e5 100644 --- a/configs/koelsch_defconfig +++ b/configs/koelsch_defconfig @@ -16,6 +16,6 @@ CONFIG_TARGET_KOELSCH=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set +CONFIG_SH_SDHI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SH_SDHI=y diff --git a/configs/kwb_defconfig b/configs/kwb_defconfig index 928c4bf04f..f82fcf31e8 100644 --- a/configs/kwb_defconfig +++ b/configs/kwb_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_KWB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" +CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set @@ -14,4 +15,3 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " diff --git a/configs/kzm9g_defconfig b/configs/kzm9g_defconfig index 0669bbcdc1..476f5f02d2 100644 --- a/configs/kzm9g_defconfig +++ b/configs/kzm9g_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_KZM9G=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="KZM-A9-GT# " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/lager_defconfig b/configs/lager_defconfig index 6b86f00eaa..a43aca3fc8 100644 --- a/configs/lager_defconfig +++ b/configs/lager_defconfig @@ -16,6 +16,6 @@ CONFIG_TARGET_LAGER=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set +CONFIG_SH_SDHI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SH_SDHI=y diff --git a/configs/lp8x4x_defconfig b/configs/lp8x4x_defconfig deleted file mode 100644 index 63bbccaf7c..0000000000 --- a/configs/lp8x4x_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_LP8X4X=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig index 7318eeb39b..44c7f50b2c 100644 --- a/configs/ls1021aqds_qspi_defconfig +++ b/configs/ls1021aqds_qspi_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y +CONFIG_DM_SPI=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds" CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_DM=y CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_E1000=y -CONFIG_DM_SPI=y diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig index 4e5f100d4f..5bb52bb28f 100644 --- a/configs/ls1021atwr_qspi_defconfig +++ b/configs/ls1021atwr_qspi_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021ATWR=y +CONFIG_DM_SPI=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr" CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" # CONFIG_CMD_IMLS is not set @@ -9,4 +10,3 @@ CONFIG_DM=y CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_E1000=y -CONFIG_DM_SPI=y diff --git a/configs/ls2085aqds_defconfig b/configs/ls2085aqds_defconfig index fb5ab2f139..0c770e4ea7 100644 --- a/configs/ls2085aqds_defconfig +++ b/configs/ls2085aqds_defconfig @@ -1,13 +1,13 @@ CONFIG_ARM=y CONFIG_TARGET_LS2085AQDS=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-qds" # CONFIG_SYS_MALLOC_F is not set +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-qds" CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_DM=y -CONFIG_DM_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_E1000=y -CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y diff --git a/configs/ls2085ardb_defconfig b/configs/ls2085ardb_defconfig index e80b3c1f53..79565330df 100644 --- a/configs/ls2085ardb_defconfig +++ b/configs/ls2085ardb_defconfig @@ -1,13 +1,13 @@ CONFIG_ARM=y CONFIG_TARGET_LS2085ARDB=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-rdb" # CONFIG_SYS_MALLOC_F is not set +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2085a-rdb" CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_DM=y -CONFIG_DM_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_E1000=y -CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y diff --git a/configs/lwmon5_defconfig b/configs/lwmon5_defconfig new file mode 100644 index 0000000000..0a6da688cb --- /dev/null +++ b/configs/lwmon5_defconfig @@ -0,0 +1,4 @@ +CONFIG_PPC=y +CONFIG_4xx=y +CONFIG_TARGET_LWMON5=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/magnesium_defconfig b/configs/magnesium_defconfig deleted file mode 100644 index 2fa658911d..0000000000 --- a/configs/magnesium_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_MAGNESIUM=y -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mcx_defconfig b/configs/mcx_defconfig index 1f38640a81..fe80d6ca11 100644 --- a/configs/mcx_defconfig +++ b/configs/mcx_defconfig @@ -2,9 +2,9 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_MCX=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="mcx # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="mcx # " diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index c0ba9d193d..df9560e3fb 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -1,16 +1,16 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA20=y CONFIG_TARGET_MEDCOM_WIDE=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide" +CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # " diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index 53829d4547..da589a0168 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -2,7 +2,7 @@ CONFIG_MICROBLAZE=y CONFIG_TARGET_MICROBLAZE_GENERIC=y CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" CONFIG_SPL=y +CONFIG_SYS_PROMPT="U-Boot-mONStR> " # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y -CONFIG_SYS_PROMPT="U-Boot-mONStR> " diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index f3cf91b94e..0d5bd4ed07 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -17,17 +17,17 @@ CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y CONFIG_CPU=y -CONFIG_DM_PCI=y CONFIG_SPI_FLASH=y CONFIG_DM_ETH=y +CONFIG_DM_PCI=y +CONFIG_DM_RTC=y CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_BASE=0x3f8 CONFIG_DEBUG_UART_CLOCK=1843200 +CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_VIDEO_VESA=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_11A=y -CONFIG_USB=y -CONFIG_DM_USB=y -CONFIG_DM_RTC=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y diff --git a/configs/ml507_defconfig b/configs/ml507_defconfig index 44b7c31b7c..d1e4e30371 100644 --- a/configs/ml507_defconfig +++ b/configs/ml507_defconfig @@ -2,8 +2,8 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_ML507=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o" +CONFIG_SYS_PROMPT="ml507:/# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="ml507:/# " diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig index d5d26cf297..27f2ecd8a7 100644 --- a/configs/mt_ventoux_defconfig +++ b/configs/mt_ventoux_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_MT_VENTOUX=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="mt_ventoux => " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="mt_ventoux => " diff --git a/configs/mv88f6281gtw_ge_defconfig b/configs/mv88f6281gtw_ge_defconfig deleted file mode 100644 index 8988734ef3..0000000000 --- a/configs/mv88f6281gtw_ge_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_MV88F6281GTW_GE=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y diff --git a/configs/mx51_efikamx_defconfig b/configs/mx51_efikamx_defconfig deleted file mode 100644 index a88c223064..0000000000 --- a/configs/mx51_efikamx_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_MX51_EFIKAMX=y -CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="Efika> " diff --git a/configs/mx51_efikasb_defconfig b/configs/mx51_efikasb_defconfig deleted file mode 100644 index 1bc7c00cb8..0000000000 --- a/configs/mx51_efikasb_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_MX51_EFIKAMX=y -CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y diff --git a/configs/mx6ul_14x14_evk_defconfig b/configs/mx6ul_14x14_evk_defconfig index 57dbad2250..6787f003d1 100644 --- a/configs/mx6ul_14x14_evk_defconfig +++ b/configs/mx6ul_14x14_evk_defconfig @@ -1,8 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y -CONFIG_CMD_NET=y -CONFIG_CMD_PING=y -CONFIG_CMD_DHCP=y +CONFIG_TARGET_MX6UL_14X14_EVK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" -CONFIG_TARGET_MX6UL_14X14_EVK=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y diff --git a/configs/mx6ul_9x9_evk_defconfig b/configs/mx6ul_9x9_evk_defconfig new file mode 100644 index 0000000000..8b4c68c922 --- /dev/null +++ b/configs/mx6ul_9x9_evk_defconfig @@ -0,0 +1,7 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_TARGET_MX6UL_9X9_EVK=y +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig new file mode 100644 index 0000000000..60aacb2c6a --- /dev/null +++ b/configs/mx7dsabresd_defconfig @@ -0,0 +1,11 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX7=y +CONFIG_TARGET_MX7DSABRESD=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg,MX7D" +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index 257c30586a..6748a6eeda 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_NAS220=y +CONFIG_SYS_PROMPT="nas220> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="nas220> " diff --git a/configs/nhk8815_defconfig b/configs/nhk8815_defconfig deleted file mode 100644 index 218d92a6ca..0000000000 --- a/configs/nhk8815_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_NOMADIK=y -CONFIG_NOMADIK_NHK8815=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="Nomadik> " diff --git a/configs/nhk8815_onenand_defconfig b/configs/nhk8815_onenand_defconfig deleted file mode 100644 index c01559d8cd..0000000000 --- a/configs/nhk8815_onenand_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_NOMADIK=y -CONFIG_NOMADIK_NHK8815=y -CONFIG_SYS_EXTRA_OPTIONS="BOOT_ONENAND" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig index 3dd24e0313..b3d9682eaa 100644 --- a/configs/nokia_rx51_defconfig +++ b/configs/nokia_rx51_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_NOKIA_RX51=y +CONFIG_SYS_PROMPT="Nokia RX-51 # " CONFIG_AUTOBOOT_KEYED=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -10,4 +11,3 @@ CONFIG_AUTOBOOT_KEYED=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="Nokia RX-51 # " diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index 6464c379a4..2dd293007b 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -1,8 +1,10 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA124=y CONFIG_TARGET_NYAN_BIG=y CONFIG_DEFAULT_DEVICE_TREE="tegra124-nyan-big" +CONFIG_SYS_PROMPT="Tegra124 (Nyan-big) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set @@ -11,19 +13,17 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra124-nyan-big" # CONFIG_CMD_NFS is not set CONFIG_CMD_TPM=y CONFIG_CMD_TPM_TEST=y -CONFIG_SPL_DM=y -CONFIG_SPI_FLASH=y +CONFIG_CROS_EC_KEYB=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y -CONFIG_CROS_EC_KEYB=y +CONFIG_SPI_FLASH=y +CONFIG_TEGRA114_SPI=y CONFIG_DM_TPM=y CONFIG_TPM_TIS_I2C=y -CONFIG_TEGRA114_SPI=y -CONFIG_DISPLAY_PORT=y -CONFIG_VIDEO_TEGRA124=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_TPM=y +CONFIG_DISPLAY_PORT=y +CONFIG_VIDEO_TEGRA124=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra124 (Nyan-big) # " +CONFIG_TPM=y diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index 9c3b6d6de5..479af9e71a 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -1,15 +1,15 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ODROID_XU3=y +CONFIG_DM_I2C=y CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SYS_PROMPT="ODROID-XU3 # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y CONFIG_DM_PMIC=y CONFIG_DM_REGULATOR=y -CONFIG_VIDEO_BRIDGE=y -CONFIG_SYS_PROMPT="ODROID-XU3 # " CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_VIDEO_BRIDGE=y diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig index 5c355ba31d..1e321d3cf1 100644 --- a/configs/odroid_defconfig +++ b/configs/odroid_defconfig @@ -1,8 +1,10 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ODROID=y +CONFIG_DM_I2C=y CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SYS_PROMPT="Odroid # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_FPGA is not set @@ -11,7 +13,6 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid" CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y -CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_MAX77686=y @@ -20,4 +21,3 @@ CONFIG_DM_REGULATOR_MAX77686=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_ERRNO_STR=y -CONFIG_SYS_PROMPT="Odroid # " diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index de8fbd928b..168b9a818f 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -2,9 +2,9 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_EVM=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="OMAP3_EVM # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="OMAP3_EVM # " diff --git a/configs/omap3_evm_quick_mmc_defconfig b/configs/omap3_evm_quick_mmc_defconfig index 7d15b1613e..1b6aa7c57e 100644 --- a/configs/omap3_evm_quick_mmc_defconfig +++ b/configs/omap3_evm_quick_mmc_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_EVM_QUICK_MMC=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="OMAP3_EVM # " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set @@ -23,4 +24,3 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set -CONFIG_SYS_PROMPT="OMAP3_EVM # " diff --git a/configs/omap3_evm_quick_nand_defconfig b/configs/omap3_evm_quick_nand_defconfig index cd30134f9c..48c2bb17e8 100644 --- a/configs/omap3_evm_quick_nand_defconfig +++ b/configs/omap3_evm_quick_nand_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_EVM_QUICK_NAND=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="OMAP3_EVM # " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set @@ -23,4 +24,3 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set -CONFIG_SYS_PROMPT="OMAP3_EVM # " diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index 5d0ac9e576..3f8a1544a2 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_LOGIC=y +CONFIG_SYS_PROMPT="OMAP Logic # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_SYS_PROMPT="OMAP Logic # " diff --git a/configs/omap3_mvblx_defconfig b/configs/omap3_mvblx_defconfig deleted file mode 100644 index fb12a70560..0000000000 --- a/configs/omap3_mvblx_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP34XX=y -CONFIG_TARGET_OMAP3_MVBLX=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_STOP_STR="S" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="mvblx # " diff --git a/configs/omap3_overo_defconfig b/configs/omap3_overo_defconfig index 5d03485299..33502126dc 100644 --- a/configs/omap3_overo_defconfig +++ b/configs/omap3_overo_defconfig @@ -2,10 +2,10 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_OVERO=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="Overo # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="Overo # " diff --git a/configs/omap3_pandora_defconfig b/configs/omap3_pandora_defconfig index 4fb7899795..e16514590e 100644 --- a/configs/omap3_pandora_defconfig +++ b/configs/omap3_pandora_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_PANDORA=y +CONFIG_SYS_PROMPT="Pandora # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set @@ -8,4 +9,3 @@ CONFIG_TARGET_OMAP3_PANDORA=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="Pandora # " diff --git a/configs/omap3_sdp3430_defconfig b/configs/omap3_sdp3430_defconfig deleted file mode 100644 index 2e46091986..0000000000 --- a/configs/omap3_sdp3430_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP34XX=y -CONFIG_TARGET_OMAP3_SDP3430=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="OMAP34XX SDP # " diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 4cff178fd2..8aa410db31 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -2,8 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_OMAPL138_LCDK=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="U-Boot > " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot > " diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig deleted file mode 100644 index 16861397c3..0000000000 --- a/configs/openrd_base_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_OPENRD=y -CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_BASE" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig deleted file mode 100644 index c34231560c..0000000000 --- a/configs/openrd_client_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_OPENRD=y -CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_CLIENT" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig deleted file mode 100644 index 530ba4d10c..0000000000 --- a/configs/openrd_ultimate_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_OPENRD=y -CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_ULTIMATE" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/origen_defconfig b/configs/origen_defconfig index 6ddfc9783b..95c8ebcbd6 100644 --- a/configs/origen_defconfig +++ b/configs/origen_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ORIGEN=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-origen" CONFIG_SPL=y +CONFIG_SYS_PROMPT="ORIGEN # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_FPGA is not set @@ -12,4 +13,3 @@ CONFIG_SPL=y CONFIG_OF_CONTROL=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_SYS_PROMPT="ORIGEN # " diff --git a/configs/otc570_dataflash_defconfig b/configs/otc570_dataflash_defconfig deleted file mode 100644 index c5ff59a5a2..0000000000 --- a/configs/otc570_dataflash_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_OTC570=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/otc570_defconfig b/configs/otc570_defconfig deleted file mode 100644 index 8cc55eea8c..0000000000 --- a/configs/otc570_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_OTC570=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/p2371-0000_defconfig b/configs/p2371-0000_defconfig index 71a9a75bca..136f6c5fe7 100644 --- a/configs/p2371-0000_defconfig +++ b/configs/p2371-0000_defconfig @@ -3,15 +3,14 @@ CONFIG_TEGRA=y CONFIG_TEGRA210=y CONFIG_TARGET_P2371_0000=y CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2371-0000" +CONFIG_SYS_PROMPT="Tegra210 (P2371-0000) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig new file mode 100644 index 0000000000..8cd2fcc8f4 --- /dev/null +++ b/configs/p2371-2180_defconfig @@ -0,0 +1,16 @@ +CONFIG_ARM=y +CONFIG_TEGRA=y +CONFIG_TEGRA210=y +CONFIG_TARGET_P2371_2180=y +CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2371-2180" +CONFIG_SYS_PROMPT="Tegra210 (P2371-2180) # " +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +CONFIG_SPI_FLASH=y +CONFIG_TEGRA114_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/p2571_defconfig b/configs/p2571_defconfig index 877a905b44..5a592e96c0 100644 --- a/configs/p2571_defconfig +++ b/configs/p2571_defconfig @@ -3,15 +3,14 @@ CONFIG_TEGRA=y CONFIG_TEGRA210=y CONFIG_TARGET_P2571=y CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2571" +CONFIG_SYS_PROMPT="Tegra210 (P2571) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/palmld_defconfig b/configs/palmld_defconfig deleted file mode 100644 index 354071ac6f..0000000000 --- a/configs/palmld_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_PALMLD=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="$ " diff --git a/configs/palmtc_defconfig b/configs/palmtc_defconfig deleted file mode 100644 index de617e1804..0000000000 --- a/configs/palmtc_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_PALMTC=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="$ " diff --git a/configs/palmtreo680_defconfig b/configs/palmtreo680_defconfig deleted file mode 100644 index b56191d876..0000000000 --- a/configs/palmtreo680_defconfig +++ /dev/null @@ -1,12 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_PALMTREO680=y -CONFIG_SPL=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index 5cba318aa9..5d076f774a 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -1,16 +1,16 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA20=y CONFIG_TARGET_PAZ00=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-paz00" +CONFIG_SYS_PROMPT="Tegra20 (Paz00) MOD # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra20 (Paz00) MOD # " diff --git a/configs/pb1000_defconfig b/configs/pb1000_defconfig index c6221a38cc..f24cd0780e 100644 --- a/configs/pb1000_defconfig +++ b/configs/pb1000_defconfig @@ -1,6 +1,7 @@ CONFIG_MIPS=y CONFIG_TARGET_PB1X00=y CONFIG_SYS_EXTRA_OPTIONS="PB1000" +CONFIG_SYS_PROMPT="Pb1x00 # " # CONFIG_CMD_BDI is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set @@ -10,4 +11,3 @@ CONFIG_SYS_EXTRA_OPTIONS="PB1000" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Pb1x00 # " diff --git a/configs/pcm030_defconfig b/configs/pcm030_defconfig index 6305092110..9da4bb066e 100644 --- a/configs/pcm030_defconfig +++ b/configs/pcm030_defconfig @@ -1,5 +1,5 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_PCM030=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="uboot> " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig new file mode 100644 index 0000000000..e8dc402878 --- /dev/null +++ b/configs/pcm052_defconfig @@ -0,0 +1,6 @@ +CONFIG_ARM=y +CONFIG_TARGET_PCM052=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND" +CONFIG_NAND_VF610_NFC=y +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y +CONFIG_SYS_NAND_VF610_NFC_45_ECC_BYTES=y diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig index 56a518556c..dfdf61b072 100644 --- a/configs/peach-pi_defconfig +++ b/configs/peach-pi_defconfig @@ -1,39 +1,39 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_PEACH_PI=y +CONFIG_DM_I2C=y CONFIG_DEFAULT_DEVICE_TREE="exynos5800-peach-pi" CONFIG_SPL=y +CONFIG_SYS_PROMPT="Peach-Pi # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_TPM=y CONFIG_CMD_TPM_TEST=y -CONFIG_SPI_FLASH=y -CONFIG_CMD_CROS_EC=y -CONFIG_CROS_EC=y -CONFIG_CROS_EC_SPI=y -CONFIG_CROS_EC_KEYB=y -CONFIG_DM_TPM=y -CONFIG_TPM_TIS_I2C=y -CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_CROS_EC_KEYB=y +CONFIG_CMD_CROS_EC=y +CONFIG_CROS_EC=y +CONFIG_CROS_EC_SPI=y +CONFIG_SPI_FLASH=y CONFIG_DM_PMIC=y CONFIG_PMIC_TPS65090=y CONFIG_DM_REGULATOR=y CONFIG_REGULATOR_TPS65090=y -CONFIG_VIDEO_BRIDGE=y -CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y CONFIG_SOUND=y CONFIG_I2S=y CONFIG_I2S_SAMSUNG=y CONFIG_SOUND_MAX98095=y CONFIG_SOUND_WM8994=y +CONFIG_DM_TPM=y +CONFIG_TPM_TIS_I2C=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_VIDEO_BRIDGE=y +CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y CONFIG_TPM=y CONFIG_ERRNO_STR=y -CONFIG_SYS_PROMPT="Peach-Pi # " diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig index 1934bf38a1..01c4f37b09 100644 --- a/configs/peach-pit_defconfig +++ b/configs/peach-pit_defconfig @@ -1,39 +1,39 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_PEACH_PIT=y +CONFIG_DM_I2C=y CONFIG_DEFAULT_DEVICE_TREE="exynos5420-peach-pit" CONFIG_SPL=y +CONFIG_SYS_PROMPT="Peach-Pit # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_TPM=y CONFIG_CMD_TPM_TEST=y -CONFIG_SPI_FLASH=y -CONFIG_CMD_CROS_EC=y -CONFIG_CROS_EC=y -CONFIG_CROS_EC_SPI=y -CONFIG_CROS_EC_KEYB=y -CONFIG_DM_TPM=y -CONFIG_TPM_TIS_I2C=y -CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_CROS_EC_KEYB=y +CONFIG_CMD_CROS_EC=y +CONFIG_CROS_EC=y +CONFIG_CROS_EC_SPI=y +CONFIG_SPI_FLASH=y CONFIG_DM_PMIC=y CONFIG_PMIC_TPS65090=y CONFIG_DM_REGULATOR=y CONFIG_REGULATOR_TPS65090=y -CONFIG_VIDEO_BRIDGE=y -CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y CONFIG_SOUND=y CONFIG_I2S=y CONFIG_I2S_SAMSUNG=y CONFIG_SOUND_MAX98095=y CONFIG_SOUND_WM8994=y +CONFIG_DM_TPM=y +CONFIG_TPM_TIS_I2C=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_VIDEO_BRIDGE=y +CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y CONFIG_TPM=y CONFIG_ERRNO_STR=y -CONFIG_SYS_PROMPT="Peach-Pit # " diff --git a/configs/pepper_defconfig b/configs/pepper_defconfig index 787c5f95f0..f86b1b783f 100644 --- a/configs/pepper_defconfig +++ b/configs/pepper_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_PEPPER=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="pepper# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="pepper# " diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index 56c215fe37..2ddd1ebee1 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y -CONFIG_MACH_PH1_LD4=y -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ARCH_UNIPHIER_PH1_LD4=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref" CONFIG_HUSH_PARSER=y @@ -11,16 +12,18 @@ CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y # CONFIG_CMD_MISC is not set CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_SIMPLE_BUS=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_SPL_NAND_DENALI=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y CONFIG_UNIPHIER_SERIAL=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/ph1_ld6b_defconfig b/configs/ph1_ld6b_defconfig new file mode 100644 index 0000000000..bbcb3444ae --- /dev/null +++ b/configs/ph1_ld6b_defconfig @@ -0,0 +1,30 @@ +CONFIG_ARM=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ARCH_UNIPHIER_PH1_LD6B=y +CONFIG_MICRO_SUPPORT_CARD=y +CONFIG_SYS_TEXT_BASE=0x84000000 +CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld6b-ref" +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set +CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +# CONFIG_CMD_MISC is not set +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_SIMPLE_BUS=y +CONFIG_NAND_DENALI=y +CONFIG_SYS_NAND_DENALI_64BIT=y +CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 +CONFIG_SPL_NAND_DENALI=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_UNIPHIER_SERIAL=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_STORAGE=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index 7624c547f6..2361db6ab5 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -1,6 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ARCH_UNIPHIER_PH1_PRO4=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref" CONFIG_HUSH_PARSER=y @@ -10,16 +12,18 @@ CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y # CONFIG_CMD_MISC is not set CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_SIMPLE_BUS=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_SPL_NAND_DENALI=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y CONFIG_UNIPHIER_SERIAL=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y diff --git a/configs/ph1_pro5_defconfig b/configs/ph1_pro5_defconfig new file mode 100644 index 0000000000..be0d7b5390 --- /dev/null +++ b/configs/ph1_pro5_defconfig @@ -0,0 +1,30 @@ +CONFIG_ARM=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ARCH_UNIPHIER_PH1_PRO5=y +CONFIG_MICRO_SUPPORT_CARD=y +CONFIG_SYS_TEXT_BASE=0x84000000 +CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro5-4kbox" +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set +CONFIG_CMD_NAND=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_PING=y +CONFIG_CMD_TIME=y +# CONFIG_CMD_MISC is not set +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_SIMPLE_BUS=y +CONFIG_NAND_DENALI=y +CONFIG_SYS_NAND_DENALI_64BIT=y +CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 +CONFIG_SPL_NAND_DENALI=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_UNIPHIER_SERIAL=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_STORAGE=y diff --git a/configs/ph1_sld3_defconfig b/configs/ph1_sld3_defconfig index d49513251e..4b871d0ebd 100644 --- a/configs/ph1_sld3_defconfig +++ b/configs/ph1_sld3_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y -CONFIG_MACH_PH1_SLD3=y -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_ARCH_UNIPHIER_PH1_SLD3=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld3-ref" CONFIG_HUSH_PARSER=y @@ -11,7 +11,6 @@ CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index 1a35a77f67..4474ec3160 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y -CONFIG_MACH_PH1_SLD8=y -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ARCH_UNIPHIER_PH1_SLD8=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref" CONFIG_HUSH_PARSER=y @@ -11,16 +12,18 @@ CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y # CONFIG_CMD_MISC is not set CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_SIMPLE_BUS=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_SPL_NAND_DENALI=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y CONFIG_UNIPHIER_SERIAL=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/platinum_picon_defconfig b/configs/platinum_picon_defconfig index 2e4e879b74..29ae5af288 100644 --- a/configs/platinum_picon_defconfig +++ b/configs/platinum_picon_defconfig @@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y CONFIG_TARGET_PLATINUM_PICON=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6DL" +CONFIG_SYS_PROMPT="picon > " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="picon > " diff --git a/configs/platinum_titanium_defconfig b/configs/platinum_titanium_defconfig index 0c8e32f577..16d3184880 100644 --- a/configs/platinum_titanium_defconfig +++ b/configs/platinum_titanium_defconfig @@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y CONFIG_TARGET_PLATINUM_TITANIUM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" +CONFIG_SYS_PROMPT="titanium > " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="titanium > " diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index 07fa7f9a97..b6b07d8073 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -1,16 +1,16 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA20=y CONFIG_TARGET_PLUTUX=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-plutux" +CONFIG_SYS_PROMPT="Tegra20 (Plutux) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra20 (Plutux) # " diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig index 0a7716eb3e..83e25739df 100644 --- a/configs/pm9261_defconfig +++ b/configs/pm9261_defconfig @@ -2,10 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_PM9261=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261" +CONFIG_SYS_PROMPT="pm9261> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="pm9261> " diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig index 45e060bde6..44c78e1607 100644 --- a/configs/pm9263_defconfig +++ b/configs/pm9263_defconfig @@ -2,10 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_PM9263=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263" +CONFIG_SYS_PROMPT="u-boot-pm9263> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="u-boot-pm9263> " diff --git a/configs/pm9g45_defconfig b/configs/pm9g45_defconfig index 3f34b3cbac..5a70de1bcf 100644 --- a/configs/pm9g45_defconfig +++ b/configs/pm9g45_defconfig @@ -2,8 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_PM9G45=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G45" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig index 50a058e0f2..234833b9ce 100644 --- a/configs/pogo_e02_defconfig +++ b/configs/pogo_e02_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_POGO_E02=y +CONFIG_SYS_PROMPT="PogoE02> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="PogoE02> " diff --git a/configs/polaris_defconfig b/configs/polaris_defconfig deleted file mode 100644 index e2095669ea..0000000000 --- a/configs/polaris_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_TRIZEPSIV=y -CONFIG_SYS_EXTRA_OPTIONS="POLARIS" -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/porter_defconfig b/configs/porter_defconfig index dc8b5caaf1..b7c99ded11 100644 --- a/configs/porter_defconfig +++ b/configs/porter_defconfig @@ -16,6 +16,6 @@ CONFIG_TARGET_PORTER=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set +CONFIG_SH_SDHI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SH_SDHI=y diff --git a/configs/portuxg20_defconfig b/configs/portuxg20_defconfig deleted file mode 100644 index 1e8344f00a..0000000000 --- a/configs/portuxg20_defconfig +++ /dev/null @@ -1,10 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_STAMP9G20=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,PORTUXG20" -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig new file mode 100644 index 0000000000..c5249d63c4 --- /dev/null +++ b/configs/pov_protab2_ips9_defconfig @@ -0,0 +1,21 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN4I=y +CONFIG_DRAM_CLK=432 +CONFIG_USB0_VBUS_PIN="PB9" +CONFIG_USB0_VBUS_DET="PH5" +CONFIG_USB0_ID_DET="PH4" +CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:18,pclk_khz:100000,le:480,ri:260,up:6,lo:16,hs:320,vs:10,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="PH8" +CONFIG_VIDEO_LCD_BL_EN="PH7" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +CONFIG_VIDEO_LCD_PANEL_LVDS=y +CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pov-protab2-ips9" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_USB_MUSB_HOST=y diff --git a/configs/pr1_defconfig b/configs/pr1_defconfig index 583f132042..03a3286d9a 100644 --- a/configs/pr1_defconfig +++ b/configs/pr1_defconfig @@ -1,9 +1,9 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_PR1=y +CONFIG_SYS_PROMPT="pr1>" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y -CONFIG_SYS_PROMPT="pr1>" diff --git a/configs/pxa255_idp_defconfig b/configs/pxa255_idp_defconfig deleted file mode 100644 index c7be4e9b33..0000000000 --- a/configs/pxa255_idp_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_PXA255_IDP=y -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index 41c2849025..b1b709fd71 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_PXM2=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="U-Boot# " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" @@ -8,4 +9,3 @@ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot# " diff --git a/configs/q8_a13_tablet_defconfig b/configs/q8_a13_tablet_defconfig new file mode 100644 index 0000000000..2c61f5115e --- /dev/null +++ b/configs/q8_a13_tablet_defconfig @@ -0,0 +1,22 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN5I=y +CONFIG_DRAM_CLK=384 +CONFIG_MMC0_CD_PIN="PG0" +CONFIG_USB0_VBUS_PIN="PG12" +CONFIG_USB0_VBUS_DET="PG1" +CONFIG_USB0_ID_DET="PG2" +CONFIG_AXP_GPIO=y +# CONFIG_VIDEO_HDMI is not set +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_POWER="AXP0-0" +CONFIG_VIDEO_LCD_BL_EN="AXP0-1" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-q8-tablet" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig new file mode 100644 index 0000000000..3a3afa5daa --- /dev/null +++ b/configs/q8_a23_tablet_800x480_defconfig @@ -0,0 +1,25 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A23=y +CONFIG_DRAM_CLK=432 +CONFIG_DRAM_ZQ=63306 +CONFIG_MMC0_CD_PIN="PB4" +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH8" +CONFIG_AXP_GPIO=y +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:36,ri:210,up:18,lo:22,hs:10,vs:5,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="PH7" +CONFIG_VIDEO_LCD_BL_EN="PH6" +CONFIG_VIDEO_LCD_BL_PWM="PH0" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-q8-tablet" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_AXP221_DLDO1_VOLT=3300 +CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig new file mode 100644 index 0000000000..fbbf1286a5 --- /dev/null +++ b/configs/q8_a33_tablet_1024x600_defconfig @@ -0,0 +1,25 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A33=y +CONFIG_DRAM_CLK=456 +CONFIG_DRAM_ZQ=15291 +CONFIG_MMC0_CD_PIN="PB4" +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH8" +CONFIG_AXP_GPIO=y +CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="PH7" +CONFIG_VIDEO_LCD_BL_EN="PH6" +CONFIG_VIDEO_LCD_BL_PWM="PH0" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-q8-tablet" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_AXP221_DLDO1_VOLT=3300 +CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig new file mode 100644 index 0000000000..8e8aa92adf --- /dev/null +++ b/configs/q8_a33_tablet_800x480_defconfig @@ -0,0 +1,25 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A33=y +CONFIG_DRAM_CLK=456 +CONFIG_DRAM_ZQ=15291 +CONFIG_MMC0_CD_PIN="PB4" +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB0_ID_DET="PH8" +CONFIG_AXP_GPIO=y +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:167,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="PH7" +CONFIG_VIDEO_LCD_BL_EN="PH6" +CONFIG_VIDEO_LCD_BL_PWM="PH0" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-q8-tablet" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_AXP221_DLDO1_VOLT=3300 +CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_USB_MUSB_HOST=y diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 06756463f5..f4cc86250d 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -17,9 +17,9 @@ CONFIG_CPU=y CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_E1000=y +CONFIG_DM_RTC=y CONFIG_VIDEO_VESA=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_111=y -CONFIG_DM_RTC=y CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SYS_VSNPRINTF=y diff --git a/configs/qong_defconfig b/configs/qong_defconfig deleted file mode 100644 index fddd836318..0000000000 --- a/configs/qong_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_QONG=y diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index 7a3ac701bb..1d8064a03b 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_RASTABAN=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="U-Boot# " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" @@ -8,4 +9,3 @@ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot# " diff --git a/configs/rd6281a_defconfig b/configs/rd6281a_defconfig deleted file mode 100644 index 8fe8594da1..0000000000 --- a/configs/rd6281a_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_RD6281A=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index 4b920454ee..334a1b7f66 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y CONFIG_ARCH_BCM283X=y CONFIG_TARGET_RPI_2=y +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_PHYS_TO_BUS=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index 195ff99d42..8cce790cee 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y CONFIG_ARCH_BCM283X=y CONFIG_TARGET_RPI=y +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_PHYS_TO_BUS=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/rut_defconfig b/configs/rut_defconfig index 774957c739..8bb8d889ca 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_RUT=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="U-Boot# " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" @@ -8,4 +9,3 @@ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot# " diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig index 5c873f779c..fc0a45e327 100644 --- a/configs/s5p_goni_defconfig +++ b/configs/s5p_goni_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_S5PC1XX=y CONFIG_TARGET_S5P_GONI=y CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni" +CONFIG_SYS_PROMPT="Goni # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_FLASH is not set @@ -10,4 +11,3 @@ CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni" # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set -CONFIG_SYS_PROMPT="Goni # " diff --git a/configs/s5pc210_universal_defconfig b/configs/s5pc210_universal_defconfig index 36d294c6bd..61f6d1fb01 100644 --- a/configs/s5pc210_universal_defconfig +++ b/configs/s5pc210_universal_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_S5PC210_UNIVERSAL=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-universal_c210" +CONFIG_SYS_PROMPT="Universal # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_FPGA is not set @@ -11,4 +12,3 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos4210-universal_c210" CONFIG_OF_CONTROL=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_SYS_PROMPT="Universal # " diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index e9e1597f9a..b2675c706d 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -15,47 +15,48 @@ CONFIG_CMD_TPM=y CONFIG_CMD_TPM_TEST=y CONFIG_OF_CONTROL=y CONFIG_OF_HOSTFILE=y -CONFIG_CLK=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_DEVRES=y -CONFIG_DM_PCI=y -CONFIG_PCI_SANDBOX=y -CONFIG_SPI_FLASH_SANDBOX=y -CONFIG_SPI_FLASH=y +CONFIG_CLK=y +CONFIG_SANDBOX_GPIO=y +CONFIG_SYS_I2C_SANDBOX=y +CONFIG_CROS_EC_KEYB=y +CONFIG_LED=y +CONFIG_LED_GPIO=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SANDBOX=y CONFIG_RESET=y +CONFIG_DM_MMC=y +CONFIG_SPI_FLASH_SANDBOX=y +CONFIG_SPI_FLASH=y CONFIG_DM_ETH=y -CONFIG_CROS_EC_KEYB=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_SANDBOX_SERIAL=y -CONFIG_DM_TPM=y -CONFIG_TPM_TIS_SANDBOX=y -CONFIG_SYS_I2C_SANDBOX=y -CONFIG_SANDBOX_SPI=y +CONFIG_DM_PCI=y +CONFIG_PCI_SANDBOX=y CONFIG_PINCTRL=y CONFIG_PINCONF=y CONFIG_PINCTRL_SANDBOX=y -CONFIG_SANDBOX_GPIO=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_SANDBOX=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_SANDBOX=y CONFIG_RAM=y +CONFIG_DM_RTC=y +CONFIG_SANDBOX_SERIAL=y CONFIG_SOUND=y CONFIG_SOUND_SANDBOX=y +CONFIG_SANDBOX_SPI=y +CONFIG_DM_TPM=y +CONFIG_TPM_TIS_SANDBOX=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_EMUL=y CONFIG_USB_STORAGE=y -CONFIG_DM_MMC=y -CONFIG_DM_RTC=y CONFIG_SYS_VSNPRINTF=y CONFIG_CMD_DHRYSTONE=y CONFIG_TPM=y +CONFIG_LZ4=y CONFIG_ERRNO_STR=y CONFIG_UNIT_TEST=y CONFIG_UT_TIME=y diff --git a/configs/scb9328_defconfig b/configs/scb9328_defconfig deleted file mode 100644 index c9c5034808..0000000000 --- a/configs/scb9328_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_SCB9328=y -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="scb9328> " diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index 54afbdbca7..a5023c9830 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -1,16 +1,16 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA20=y CONFIG_TARGET_SEABOARD=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-seaboard" +CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # " diff --git a/configs/secomx6quq7_defconfig b/configs/secomx6quq7_defconfig index c97172d2c0..57bad8b8c3 100644 --- a/configs/secomx6quq7_defconfig +++ b/configs/secomx6quq7_defconfig @@ -5,6 +5,6 @@ CONFIG_SECOMX6_UQ7=y CONFIG_SECOMX6Q=y CONFIG_SECOMX6_2GB=y CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC" +CONFIG_SYS_PROMPT="SECO MX6Q uQ7 U-Boot > " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_SYS_PROMPT="SECO MX6Q uQ7 U-Boot > " diff --git a/configs/silk_defconfig b/configs/silk_defconfig index e4e4ebc6d9..5afcde39ac 100644 --- a/configs/silk_defconfig +++ b/configs/silk_defconfig @@ -16,6 +16,6 @@ CONFIG_TARGET_SILK=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set +CONFIG_SH_SDHI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y -CONFIG_SH_SDHI=y diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index 8f12f3076b..ee4340fd85 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -3,5 +3,4 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SMARTWEB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260" -CONFIG_CMD_NET=y CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/smdk2410_defconfig b/configs/smdk2410_defconfig index 51f348e23b..bb80d55041 100644 --- a/configs/smdk2410_defconfig +++ b/configs/smdk2410_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_SMDK2410=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="SMDK2410 # " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig index c9fd79f60f..0aca5b43b7 100644 --- a/configs/smdk5250_defconfig +++ b/configs/smdk5250_defconfig @@ -1,21 +1,21 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_SMDK5250=y +CONFIG_DM_I2C=y CONFIG_DEFAULT_DEVICE_TREE="exynos5250-smdk5250" CONFIG_SPL=y +CONFIG_SYS_PROMPT="SMDK5250 # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_SOUND=y CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y -CONFIG_SPI_FLASH=y -CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y +CONFIG_SPI_FLASH=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_MAX77686=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_MAX77686=y -CONFIG_VIDEO_BRIDGE=y CONFIG_SOUND=y CONFIG_I2S=y CONFIG_I2S_SAMSUNG=y @@ -23,5 +23,5 @@ CONFIG_SOUND_MAX98095=y CONFIG_SOUND_WM8994=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_VIDEO_BRIDGE=y CONFIG_ERRNO_STR=y -CONFIG_SYS_PROMPT="SMDK5250 # " diff --git a/configs/smdk5420_defconfig b/configs/smdk5420_defconfig index e90c765a0c..60bcf0a688 100644 --- a/configs/smdk5420_defconfig +++ b/configs/smdk5420_defconfig @@ -1,16 +1,16 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_SMDK5420=y +CONFIG_DM_I2C=y CONFIG_DEFAULT_DEVICE_TREE="exynos5420-smdk5420" CONFIG_SPL=y +CONFIG_SYS_PROMPT="SMDK5420 # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y -CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y +CONFIG_SPI_FLASH=y CONFIG_DM_PMIC=y CONFIG_DM_REGULATOR=y -CONFIG_VIDEO_BRIDGE=y -CONFIG_SYS_PROMPT="SMDK5420 # " CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_VIDEO_BRIDGE=y diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig index 676781e2f6..cbd8cc3b8f 100644 --- a/configs/smdkc100_defconfig +++ b/configs/smdkc100_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_S5PC1XX=y CONFIG_TARGET_SMDKC100=y CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100" +CONFIG_SYS_PROMPT="SMDKC100 # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="SMDKC100 # " diff --git a/configs/smdkv310_defconfig b/configs/smdkv310_defconfig index 7833f62b9d..851fc5cbda 100644 --- a/configs/smdkv310_defconfig +++ b/configs/smdkv310_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_SMDKV310=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-smdkv310" CONFIG_SPL=y +CONFIG_SYS_PROMPT="SMDKV310 # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_FPGA is not set @@ -10,4 +11,3 @@ CONFIG_SPL=y # CONFIG_CMD_MISC is not set CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_SYS_PROMPT="SMDKV310 # " diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig index 31cc5a0b23..0635d6c793 100644 --- a/configs/snapper9260_defconfig +++ b/configs/snapper9260_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_SNAPPER9260=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260" +CONFIG_SYS_PROMPT="Snapper> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -10,4 +11,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="Snapper> " diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig index dd66ca0be8..7afaa49074 100644 --- a/configs/sniper_defconfig +++ b/configs/sniper_defconfig @@ -2,9 +2,9 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_SNIPER=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="Sniper # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_USB=y CONFIG_USB_MUSB_GADGET=y -CONFIG_SYS_PROMPT="Sniper # " diff --git a/configs/snow_defconfig b/configs/snow_defconfig index 32c7c5deab..c4e2f61e28 100644 --- a/configs/snow_defconfig +++ b/configs/snow_defconfig @@ -1,8 +1,10 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_SNOW=y +CONFIG_DM_I2C=y CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow" CONFIG_SPL=y +CONFIG_SYS_PROMPT="snow # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_SOUND=y @@ -10,22 +12,15 @@ CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_TPM=y CONFIG_CMD_TPM_TEST=y -CONFIG_SPI_FLASH=y -CONFIG_CMD_CROS_EC=y -CONFIG_CROS_EC=y -CONFIG_CROS_EC_I2C=y -CONFIG_CROS_EC_KEYB=y -CONFIG_DEBUG_UART=y -CONFIG_DEBUG_UART_S5P=y -CONFIG_DEBUG_UART_BASE=0x12c30000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_DM_TPM=y -CONFIG_TPM_TIS_I2C=y -CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y CONFIG_I2C_CROS_EC_LDO=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_CROS_EC_KEYB=y +CONFIG_CMD_CROS_EC=y +CONFIG_CROS_EC=y +CONFIG_CROS_EC_I2C=y +CONFIG_SPI_FLASH=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_MAX77686=y CONFIG_PMIC_S5M8767=y @@ -34,16 +29,21 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_MAX77686=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y -CONFIG_VIDEO_BRIDGE=y -CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y -CONFIG_VIDEO_BRIDGE_NXP_PTN3460=y -CONFIG_SYS_PROMPT="snow # " +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_S5P=y +CONFIG_DEBUG_UART_BASE=0x12c30000 +CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_SOUND=y CONFIG_I2S=y CONFIG_I2S_SAMSUNG=y CONFIG_SOUND_MAX98095=y CONFIG_SOUND_WM8994=y +CONFIG_DM_TPM=y +CONFIG_TPM_TIS_I2C=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_VIDEO_BRIDGE=y +CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y +CONFIG_VIDEO_BRIDGE_NXP_PTN3460=y CONFIG_TPM=y CONFIG_ERRNO_STR=y diff --git a/configs/snowball_defconfig b/configs/snowball_defconfig deleted file mode 100644 index e73bc48af1..0000000000 --- a/configs/snowball_defconfig +++ /dev/null @@ -1,13 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_SNOWBALL=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U8500 $ " diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig index cb460e86e0..afdf237996 100644 --- a/configs/socfpga_arria5_defconfig +++ b/configs/socfpga_arria5_defconfig @@ -1,6 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_DM=y +CONFIG_DM_GPIO=y CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk" CONFIG_SPL=y @@ -8,11 +10,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x00800000 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_SPL_DM=y +CONFIG_DWAPB_GPIO=y CONFIG_SPI_FLASH=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_GPIO=y -CONFIG_DWAPB_GPIO=y diff --git a/configs/socfpga_cyclone5_defconfig b/configs/socfpga_cyclone5_defconfig index 8a7f8ccb95..fcd12d91e5 100644 --- a/configs/socfpga_cyclone5_defconfig +++ b/configs/socfpga_cyclone5_defconfig @@ -1,6 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_DM=y +CONFIG_DM_GPIO=y CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk" CONFIG_SPL=y @@ -8,11 +10,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x00800000 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_SPL_DM=y +CONFIG_DWAPB_GPIO=y CONFIG_SPI_FLASH=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_GPIO=y -CONFIG_DWAPB_GPIO=y diff --git a/configs/socfpga_de0_nano_soc_defconfig b/configs/socfpga_de0_nano_soc_defconfig index 2b0d5106dd..5dc74b7fb3 100644 --- a/configs/socfpga_de0_nano_soc_defconfig +++ b/configs/socfpga_de0_nano_soc_defconfig @@ -1,20 +1,16 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_TARGET_SOCFPGA_CYCLONE5=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_DM=y +CONFIG_DM_GPIO=y CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc" CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x00800000 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_OF_CONTROL=y +CONFIG_SPL_SIMPLE_BUS=y +CONFIG_DWAPB_GPIO=y CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_GPIO=y -CONFIG_DWAPB_GPIO=y -CONFIG_SPL_DM=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SIMPLE_BUS=y -CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 diff --git a/configs/socfpga_mcvevk_defconfig b/configs/socfpga_mcvevk_defconfig index 36ec320e15..b90bce7343 100644 --- a/configs/socfpga_mcvevk_defconfig +++ b/configs/socfpga_mcvevk_defconfig @@ -1,21 +1,16 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_TARGET_SOCFPGA_CYCLONE5=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_DM=y +CONFIG_DM_GPIO=y CONFIG_TARGET_SOCFPGA_DENX_MCVEVK=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_mcvevk" CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x00800000 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_OF_CONTROL=y +CONFIG_SPL_SIMPLE_BUS=y +CONFIG_DWAPB_GPIO=y CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_GPIO=y -CONFIG_DWAPB_GPIO=y -CONFIG_SPL_DM=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_DM_SEQ_ALIAS=y -CONFIG_SPL_SIMPLE_BUS=y -CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 diff --git a/configs/socfpga_sockit_defconfig b/configs/socfpga_sockit_defconfig index 01723c5f34..11a47861a6 100644 --- a/configs/socfpga_sockit_defconfig +++ b/configs/socfpga_sockit_defconfig @@ -1,26 +1,18 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_TARGET_SOCFPGA_CYCLONE5=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_DM=y +CONFIG_DM_GPIO=y CONFIG_TARGET_SOCFPGA_TERASIC_SOCKIT=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sockit" CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x00800000 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_OF_CONTROL=y +CONFIG_SPL_SIMPLE_BUS=y +CONFIG_DWAPB_GPIO=y CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_USE_4K_SECTORS=n +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_GPIO=y -CONFIG_DWAPB_GPIO=y -CONFIG_SPL_DM=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_DM_SEQ_ALIAS=y -CONFIG_SPL_SIMPLE_BUS=y -CONFIG_DM_SPI=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig index d7675791da..04bacd079a 100644 --- a/configs/socfpga_socrates_defconfig +++ b/configs/socfpga_socrates_defconfig @@ -1,6 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_DM=y +CONFIG_DM_GPIO=y CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates" CONFIG_SPL=y @@ -8,11 +10,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x00800000 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_SPL_DM=y +CONFIG_DWAPB_GPIO=y CONFIG_SPI_FLASH=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_GPIO=y -CONFIG_DWAPB_GPIO=y diff --git a/configs/spring_defconfig b/configs/spring_defconfig index b20bfed096..4acadf34ef 100644 --- a/configs/spring_defconfig +++ b/configs/spring_defconfig @@ -1,8 +1,10 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_SPRING=y +CONFIG_DM_I2C=y CONFIG_DEFAULT_DEVICE_TREE="exynos5250-spring" CONFIG_SPL=y +CONFIG_SYS_PROMPT="spring # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_SOUND=y @@ -10,22 +12,15 @@ CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_TPM=y CONFIG_CMD_TPM_TEST=y -CONFIG_SPI_FLASH=y -CONFIG_CMD_CROS_EC=y -CONFIG_CROS_EC=y -CONFIG_CROS_EC_I2C=y -CONFIG_CROS_EC_KEYB=y -CONFIG_DEBUG_UART=y -CONFIG_DEBUG_UART_S5P=y -CONFIG_DEBUG_UART_BASE=0x12c30000 -CONFIG_DEBUG_UART_CLOCK=100000000 -CONFIG_DM_TPM=y -CONFIG_TPM_TIS_I2C=y -CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y CONFIG_I2C_CROS_EC_LDO=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_CROS_EC_KEYB=y +CONFIG_CMD_CROS_EC=y +CONFIG_CROS_EC=y +CONFIG_CROS_EC_I2C=y +CONFIG_SPI_FLASH=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_MAX77686=y CONFIG_PMIC_S5M8767=y @@ -34,15 +29,20 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_MAX77686=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y -CONFIG_VIDEO_BRIDGE=y -CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y -CONFIG_SYS_PROMPT="spring # " +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_S5P=y +CONFIG_DEBUG_UART_BASE=0x12c30000 +CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_SOUND=y CONFIG_I2S=y CONFIG_I2S_SAMSUNG=y CONFIG_SOUND_MAX98095=y CONFIG_SOUND_WM8994=y +CONFIG_DM_TPM=y +CONFIG_TPM_TIS_I2C=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_VIDEO_BRIDGE=y +CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y CONFIG_TPM=y CONFIG_ERRNO_STR=y diff --git a/configs/stamp9g20_defconfig b/configs/stamp9g20_defconfig deleted file mode 100644 index 40d6232b91..0000000000 --- a/configs/stamp9g20_defconfig +++ /dev/null @@ -1,11 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_STAMP9G20=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20" -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/stm32f429-discovery_defconfig b/configs/stm32f429-discovery_defconfig index 0c54d5b20f..7512457d0b 100644 --- a/configs/stm32f429-discovery_defconfig +++ b/configs/stm32f429-discovery_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_STM32F429_DISCOVERY=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="U-Boot > " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/versatileqemu_defconfig b/configs/stout_defconfig index 9ddef4d9bd..fcfc5c1619 100644 --- a/configs/versatileqemu_defconfig +++ b/configs/stout_defconfig @@ -1,18 +1,21 @@ CONFIG_ARM=y -CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB" +CONFIG_RMOBILE=y +CONFIG_TARGET_STOUT=y +# CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +CONFIG_SH_SDHI=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig index 0eeb7f681e..60de787a2a 100644 --- a/configs/stv0991_defconfig +++ b/configs/stv0991_defconfig @@ -3,6 +3,7 @@ CONFIG_TARGET_STV0991=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_DEFAULT_DEVICE_TREE="stv0991" CONFIG_SYS_EXTRA_OPTIONS="stv0991" +CONFIG_SYS_PROMPT="STV0991> " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " @@ -12,4 +13,3 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_OF_CONTROL=y CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_PROMPT="STV0991> " diff --git a/configs/tao3530_defconfig b/configs/tao3530_defconfig index 779f400641..b2977f3a09 100644 --- a/configs/tao3530_defconfig +++ b/configs/tao3530_defconfig @@ -2,9 +2,9 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_TAO3530=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="TAO-3530 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="TAO-3530 # " diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index 838d0ed378..ec1566f20b 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_TAURUS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -11,4 +12,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/tb100_defconfig b/configs/tb100_defconfig index acd1f3a904..ca34bbbff1 100644 --- a/configs/tb100_defconfig +++ b/configs/tb100_defconfig @@ -1,9 +1,11 @@ CONFIG_ARC=y CONFIG_ARC_CACHE_LINE_SHIFT=5 CONFIG_TARGET_TB100=y +CONFIG_DM_SERIAL=y CONFIG_SYS_CLK_FREQ=500000000 CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="abilis_tb100" +CONFIG_SYS_PROMPT="[tb100]:~# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set @@ -12,6 +14,4 @@ CONFIG_OF_EMBED=y CONFIG_DM=y CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y -CONFIG_DM_SERIAL=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="[tb100]:~# " diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 822aec37ed..ffc419d9ee 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_TBS2910=y +CONFIG_SYS_PROMPT="Matrix U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_DM=y CONFIG_DM_THERMAL=y -CONFIG_SYS_PROMPT="Matrix U-Boot> " diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index 4e8f5c6b33..de74dc954b 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -1,17 +1,17 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA30=y CONFIG_TARGET_TEC_NG=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-tec-ng" +CONFIG_SYS_PROMPT="Tegra30 (TEC-NG) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra30 (TEC-NG) # " diff --git a/configs/tec_defconfig b/configs/tec_defconfig index 84fa0be14f..2163ec83e5 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -1,16 +1,16 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA20=y CONFIG_TARGET_TEC=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-tec" +CONFIG_SYS_PROMPT="Tegra20 (TEC) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra20 (TEC) # " diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index e2a6b0ca42..6b8e6b1c20 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_THUBAN=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="U-Boot# " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" @@ -8,4 +9,3 @@ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot# " diff --git a/configs/ti814x_evm_defconfig b/configs/ti814x_evm_defconfig index f7d1e11fb1..781e270d1d 100644 --- a/configs/ti814x_evm_defconfig +++ b/configs/ti814x_evm_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_TI814X_EVM=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="U-Boot# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot# " diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig index 1fd27193b7..294d77599c 100644 --- a/configs/ti816x_evm_defconfig +++ b/configs/ti816x_evm_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_TI816X_EVM=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="u-boot/ti816x# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="u-boot/ti816x# " diff --git a/configs/titanium_defconfig b/configs/titanium_defconfig index de3c78dc38..45c49ce574 100644 --- a/configs/titanium_defconfig +++ b/configs/titanium_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_TITANIUM=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/barco/titanium/imximage.cfg" +CONFIG_SYS_PROMPT="Titanium > " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="Titanium > " diff --git a/configs/tk71_defconfig b/configs/tk71_defconfig deleted file mode 100644 index 5e2a0b84c9..0000000000 --- a/configs/tk71_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_TK71=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig index 4b290db02c..e6b9381c0a 100644 --- a/configs/trats2_defconfig +++ b/configs/trats2_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_TRATS2=y CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SYS_PROMPT="Trats2 # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_FPGA is not set @@ -12,4 +13,3 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2" CONFIG_OF_CONTROL=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_SYS_PROMPT="Trats2 # " diff --git a/configs/trats_defconfig b/configs/trats_defconfig index 9c24cae007..823404671e 100644 --- a/configs/trats_defconfig +++ b/configs/trats_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_TRATS=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats" +CONFIG_SYS_PROMPT="Trats # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_FPGA is not set @@ -11,4 +12,3 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats" CONFIG_OF_CONTROL=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_SYS_PROMPT="Trats # " diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig index 1da9e94f67..bc3083749f 100644 --- a/configs/tricorder_defconfig +++ b/configs/tricorder_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_TRICORDER=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="OMAP3 Tricorder # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set @@ -9,4 +10,3 @@ CONFIG_SPL=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="OMAP3 Tricorder # " diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index a1bcb1110f..18292e25b4 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -1,17 +1,17 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA20=y CONFIG_TARGET_TRIMSLICE=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-trimslice" +CONFIG_SYS_PROMPT="Tegra20 (TrimSlice) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra20 (TrimSlice) # " diff --git a/configs/trizepsiv_defconfig b/configs/trizepsiv_defconfig deleted file mode 100644 index 18879837fb..0000000000 --- a/configs/trizepsiv_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_TRIZEPSIV=y -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/tseries_mmc_defconfig b/configs/tseries_mmc_defconfig index a083ee07e2..b4a4873e03 100644 --- a/configs/tseries_mmc_defconfig +++ b/configs/tseries_mmc_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_TSERIES=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" +CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set @@ -14,4 +15,3 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " diff --git a/configs/tseries_nand_defconfig b/configs/tseries_nand_defconfig index aa66a0eda8..8177a51ab0 100644 --- a/configs/tseries_nand_defconfig +++ b/configs/tseries_nand_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_TSERIES=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" +CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set @@ -14,4 +15,3 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " diff --git a/configs/tseries_spi_defconfig b/configs/tseries_spi_defconfig index 1cb90d602a..1c2a0ba637 100644 --- a/configs/tseries_spi_defconfig +++ b/configs/tseries_spi_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_TSERIES=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" +CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set @@ -15,4 +16,3 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# " diff --git a/configs/tt01_defconfig b/configs/tt01_defconfig deleted file mode 100644 index 08f9f7bdca..0000000000 --- a/configs/tt01_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_TT01=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="TT01> " diff --git a/configs/twister_defconfig b/configs/twister_defconfig index c3edd343fb..b817a5589d 100644 --- a/configs/twister_defconfig +++ b/configs/twister_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_TWISTER=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="twister => " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="twister => " diff --git a/configs/tx25_defconfig b/configs/tx25_defconfig deleted file mode 100644 index b752414102..0000000000 --- a/configs/tx25_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_TX25=y -CONFIG_SPL=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/u8500_href_defconfig b/configs/u8500_href_defconfig deleted file mode 100644 index 0aebc7846d..0000000000 --- a/configs/u8500_href_defconfig +++ /dev/null @@ -1,13 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_U8500_HREF=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="U8500 $ " diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig index e4f1d8d3de..223917d204 100644 --- a/configs/udoo_defconfig +++ b/configs/udoo_defconfig @@ -1,7 +1,7 @@ -CONFIG_SPL=y CONFIG_ARM=y CONFIG_ARCH_MX6=y -CONFIG_DM=y -CONFIG_DM_THERMAL=y CONFIG_TARGET_UDOO=y +CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/usb_a9263_dataflash_defconfig b/configs/usb_a9263_dataflash_defconfig index 8cf3c4c130..edf2b83d4d 100644 --- a/configs/usb_a9263_dataflash_defconfig +++ b/configs/usb_a9263_dataflash_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_USB_A9263=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" +CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set @@ -10,4 +11,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" # CONFIG_CMD_FPGA is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/v5fx30teval_defconfig b/configs/v5fx30teval_defconfig index e77dce9160..3e2ce7d2fe 100644 --- a/configs/v5fx30teval_defconfig +++ b/configs/v5fx30teval_defconfig @@ -2,8 +2,8 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_V5FX30TEVAL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o" +CONFIG_SYS_PROMPT="v5fx30t:/# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="v5fx30t:/# " diff --git a/configs/vct_platinum_defconfig b/configs/vct_platinum_defconfig index 9a46dcb591..0c30ae90f2 100644 --- a/configs/vct_platinum_defconfig +++ b/configs/vct_platinum_defconfig @@ -1,6 +1,6 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUM=y +CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vct_platinum_onenand_defconfig b/configs/vct_platinum_onenand_defconfig index 8c8d69a17f..e26c2f6b52 100644 --- a/configs/vct_platinum_onenand_defconfig +++ b/configs/vct_platinum_onenand_defconfig @@ -2,8 +2,8 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUM=y CONFIG_VCT_ONENAND=y +CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vct_platinum_onenand_small_defconfig b/configs/vct_platinum_onenand_small_defconfig index 4e6cbc7422..33ce32a013 100644 --- a/configs/vct_platinum_onenand_small_defconfig +++ b/configs/vct_platinum_onenand_small_defconfig @@ -3,6 +3,7 @@ CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUM=y CONFIG_VCT_ONENAND=y CONFIG_VCT_SMALL_IMAGE=y +CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMLS is not set @@ -17,4 +18,3 @@ CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vct_platinum_small_defconfig b/configs/vct_platinum_small_defconfig index f8968223af..ceb61e1841 100644 --- a/configs/vct_platinum_small_defconfig +++ b/configs/vct_platinum_small_defconfig @@ -2,6 +2,7 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUM=y CONFIG_VCT_SMALL_IMAGE=y +CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_CRC32 is not set @@ -14,4 +15,3 @@ CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vct_platinumavc_defconfig b/configs/vct_platinumavc_defconfig index 6e867b2d7a..103434cea2 100644 --- a/configs/vct_platinumavc_defconfig +++ b/configs/vct_platinumavc_defconfig @@ -1,8 +1,8 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUMAVC=y +CONFIG_SYS_PROMPT="VCT# " # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="VCT# " diff --git a/configs/vct_platinumavc_onenand_defconfig b/configs/vct_platinumavc_onenand_defconfig index 55f8c91e2f..e387b82d10 100644 --- a/configs/vct_platinumavc_onenand_defconfig +++ b/configs/vct_platinumavc_onenand_defconfig @@ -2,10 +2,10 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUMAVC=y CONFIG_VCT_ONENAND=y +CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vct_platinumavc_onenand_small_defconfig b/configs/vct_platinumavc_onenand_small_defconfig index 343ab8f7ac..1958fcd25e 100644 --- a/configs/vct_platinumavc_onenand_small_defconfig +++ b/configs/vct_platinumavc_onenand_small_defconfig @@ -3,6 +3,7 @@ CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUMAVC=y CONFIG_VCT_ONENAND=y CONFIG_VCT_SMALL_IMAGE=y +CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMLS is not set @@ -17,4 +18,3 @@ CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vct_platinumavc_small_defconfig b/configs/vct_platinumavc_small_defconfig index b4acc4aa79..0ac2def789 100644 --- a/configs/vct_platinumavc_small_defconfig +++ b/configs/vct_platinumavc_small_defconfig @@ -2,6 +2,7 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUMAVC=y CONFIG_VCT_SMALL_IMAGE=y +CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_CRC32 is not set @@ -14,4 +15,3 @@ CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vct_premium_defconfig b/configs/vct_premium_defconfig index d71dd53e92..2ae4975d77 100644 --- a/configs/vct_premium_defconfig +++ b/configs/vct_premium_defconfig @@ -1,6 +1,6 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PREMIUM=y +CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vct_premium_onenand_defconfig b/configs/vct_premium_onenand_defconfig index 6923db8366..9768dbc3e3 100644 --- a/configs/vct_premium_onenand_defconfig +++ b/configs/vct_premium_onenand_defconfig @@ -2,8 +2,8 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PREMIUM=y CONFIG_VCT_ONENAND=y +CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vct_premium_onenand_small_defconfig b/configs/vct_premium_onenand_small_defconfig index 04a2855c03..471a005339 100644 --- a/configs/vct_premium_onenand_small_defconfig +++ b/configs/vct_premium_onenand_small_defconfig @@ -3,6 +3,7 @@ CONFIG_TARGET_VCT=y CONFIG_VCT_PREMIUM=y CONFIG_VCT_ONENAND=y CONFIG_VCT_SMALL_IMAGE=y +CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMLS is not set @@ -17,4 +18,3 @@ CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vct_premium_small_defconfig b/configs/vct_premium_small_defconfig index 265a6a5a27..68c0d9ad5b 100644 --- a/configs/vct_premium_small_defconfig +++ b/configs/vct_premium_small_defconfig @@ -2,6 +2,7 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PREMIUM=y CONFIG_VCT_SMALL_IMAGE=y +CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_CRC32 is not set @@ -14,4 +15,3 @@ CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="$ " diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index ce2d4931c9..263ec631a3 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -1,18 +1,18 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA124=y CONFIG_TARGET_VENICE2=y CONFIG_DEFAULT_DEVICE_TREE="tegra124-venice2" +CONFIG_SYS_PROMPT="Tegra124 (Venice2) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_TEGRA114_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra124 (Venice2) # " diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index d3473175cf..79c125e906 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -1,16 +1,16 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA20=y CONFIG_TARGET_VENTANA=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-ventana" +CONFIG_SYS_PROMPT="Tegra20 (Ventana) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra20 (Ventana) # " diff --git a/configs/versatileab_defconfig b/configs/versatileab_defconfig deleted file mode 100644 index 3dc7d19660..0000000000 --- a/configs/versatileab_defconfig +++ /dev/null @@ -1,18 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_AB" -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_RUN is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_ECHO is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -# CONFIG_CMD_MISC is not set diff --git a/configs/versatilepb_defconfig b/configs/vexpress_aemv8a_dram_defconfig index 9fe83b97c3..e9fc8706f4 100644 --- a/configs/versatilepb_defconfig +++ b/configs/vexpress_aemv8a_dram_defconfig @@ -1,18 +1,19 @@ CONFIG_ARM=y -CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_PB" +CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="vexpress64" # CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_RUN is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -# CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set +CONFIG_DM=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_PROMPT="VExpress64# " diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig index 3390f0e1b7..bc3e05a4bd 100644 --- a/configs/vexpress_aemv8a_juno_defconfig +++ b/configs/vexpress_aemv8a_juno_defconfig @@ -1,7 +1,9 @@ CONFIG_ARM=y CONFIG_TARGET_VEXPRESS64_JUNO=y CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_DM_SERIAL=y CONFIG_DEFAULT_DEVICE_TREE="vexpress64" +CONFIG_SYS_PROMPT="VExpress64# " # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set @@ -14,5 +16,3 @@ CONFIG_DEFAULT_DEVICE_TREE="vexpress64" # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_DM=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_PROMPT="VExpress64# " diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig index 9890e641e1..a082d2778c 100644 --- a/configs/vexpress_aemv8a_semi_defconfig +++ b/configs/vexpress_aemv8a_semi_defconfig @@ -1,7 +1,9 @@ CONFIG_ARM=y CONFIG_TARGET_VEXPRESS64_BASE_FVP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_DM_SERIAL=y CONFIG_DEFAULT_DEVICE_TREE="vexpress64" +CONFIG_SYS_PROMPT="VExpress64# " # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set @@ -15,5 +17,3 @@ CONFIG_DEFAULT_DEVICE_TREE="vexpress64" # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set CONFIG_DM=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_PROMPT="VExpress64# " diff --git a/configs/vision2_defconfig b/configs/vision2_defconfig deleted file mode 100644 index 962dc5b2a0..0000000000 --- a/configs/vision2_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_VISION2=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="Vision II U-boot > " diff --git a/configs/vl_ma2sc_defconfig b/configs/vl_ma2sc_defconfig deleted file mode 100644 index c908c6e7fd..0000000000 --- a/configs/vl_ma2sc_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_VL_MA2SC=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/vl_ma2sc_ram_defconfig b/configs/vl_ma2sc_ram_defconfig deleted file mode 100644 index 43a576f3b2..0000000000 --- a/configs/vl_ma2sc_ram_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_VL_MA2SC=y -CONFIG_SYS_EXTRA_OPTIONS="RAMLOAD" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/vpac270_nor_128_defconfig b/configs/vpac270_nor_128_defconfig deleted file mode 100644 index 1d116533ab..0000000000 --- a/configs/vpac270_nor_128_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_VPAC270=y -CONFIG_SYS_EXTRA_OPTIONS="NOR,RAM_128M" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vpac270_nor_256_defconfig b/configs/vpac270_nor_256_defconfig deleted file mode 100644 index bcd10065b4..0000000000 --- a/configs/vpac270_nor_256_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_VPAC270=y -CONFIG_SYS_EXTRA_OPTIONS="NOR,RAM_256M" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="$ " diff --git a/configs/vpac270_ond_256_defconfig b/configs/vpac270_ond_256_defconfig deleted file mode 100644 index d98981916a..0000000000 --- a/configs/vpac270_ond_256_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_VPAC270=y -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="ONENAND,RAM_256M" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="$ " diff --git a/configs/whistler_defconfig b/configs/whistler_defconfig index e3ce9fd359..969f73c532 100644 --- a/configs/whistler_defconfig +++ b/configs/whistler_defconfig @@ -1,16 +1,16 @@ CONFIG_ARM=y CONFIG_TEGRA=y +CONFIG_SPL_DM=y CONFIG_TEGRA20=y CONFIG_TARGET_WHISTLER=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-whistler" +CONFIG_SYS_PROMPT="Tegra20 (Whistler) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set -CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USE_PRIVATE_LIBGCC=y -CONFIG_SYS_PROMPT="Tegra20 (Whistler) # " diff --git a/configs/wireless_space_defconfig b/configs/wireless_space_defconfig deleted file mode 100644 index 63013f61a3..0000000000 --- a/configs/wireless_space_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_WIRELESS_SPACE=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -ONFIG_SYS_PROMPT="ws> " diff --git a/configs/woodburn_defconfig b/configs/woodburn_defconfig index 3b463c1343..233b65020b 100644 --- a/configs/woodburn_defconfig +++ b/configs/woodburn_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_WOODBURN=y -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="woodburn U-Boot > " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/woodburn_sd_defconfig b/configs/woodburn_sd_defconfig index 59f2ad0ce5..aa831d9071 100644 --- a/configs/woodburn_sd_defconfig +++ b/configs/woodburn_sd_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_TARGET_WOODBURN_SD=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg" -# CONFIG_CMD_SETEXPR is not set CONFIG_SYS_PROMPT="woodburn U-Boot > " +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig index 2d3d9f399e..0169f30a19 100644 --- a/configs/work_92105_defconfig +++ b/configs/work_92105_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_WORK_92105=y +CONFIG_DM_GPIO=y CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_DM=y -CONFIG_DM_GPIO=y diff --git a/configs/x600_defconfig b/configs/x600_defconfig index 6be6cc36b6..61d91d4bb7 100644 --- a/configs/x600_defconfig +++ b/configs/x600_defconfig @@ -1,10 +1,10 @@ CONFIG_ARM=y CONFIG_TARGET_X600=y CONFIG_SPL=y +CONFIG_SYS_PROMPT="X600> " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y -CONFIG_SYS_PROMPT="X600> " diff --git a/configs/xaeniax_defconfig b/configs/xaeniax_defconfig deleted file mode 100644 index 8634cc7b60..0000000000 --- a/configs/xaeniax_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_XAENIAX=y -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/xilinx-ppc405-generic_defconfig b/configs/xilinx-ppc405-generic_defconfig index 98030d0a5d..53fafc324e 100644 --- a/configs/xilinx-ppc405-generic_defconfig +++ b/configs/xilinx-ppc405-generic_defconfig @@ -2,8 +2,8 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_XILINX_PPC405_GENERIC=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000" +CONFIG_SYS_PROMPT="xlx-ppc405:/# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="xlx-ppc405:/# " diff --git a/configs/xilinx-ppc440-generic_defconfig b/configs/xilinx-ppc440-generic_defconfig index de6977307e..79be48a995 100644 --- a/configs/xilinx-ppc440-generic_defconfig +++ b/configs/xilinx-ppc440-generic_defconfig @@ -2,8 +2,8 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_XILINX_PPC440_GENERIC=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1" +CONFIG_SYS_PROMPT="board:/# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="board:/# " diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig deleted file mode 100644 index 2977ccc8dd..0000000000 --- a/configs/zipitz2_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_ZIPITZ2=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="$ " diff --git a/configs/zmx25_defconfig b/configs/zmx25_defconfig index c759cdfbef..f853308161 100644 --- a/configs/zmx25_defconfig +++ b/configs/zmx25_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_ZMX25=y +CONFIG_SYS_PROMPT="zmx25> " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="boot in %d s\n" CONFIG_AUTOBOOT_DELAY_STR="delaygs" CONFIG_AUTOBOOT_STOP_STR="stopgs" # CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="zmx25> " diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 3e141a8d22..a6757acc02 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_TARGET_ZYNQ_MICROZED=y CONFIG_DEFAULT_DEVICE_TREE="zynq-microzed" -# CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index f94bddef8d..8a388f36d2 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y -CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702" # CONFIG_SYS_MALLOC_F is not set +CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702" CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 49efc6b25a..f1009eebd3 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_TARGET_ZYNQ_ZC706=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706" -# CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/zynq_zc70x_defconfig b/configs/zynq_zc70x_defconfig index 633c521d78..6465040698 100644 --- a/configs/zynq_zc70x_defconfig +++ b/configs/zynq_zc70x_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_TARGET_ZYNQ_ZC70X=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702" -# CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index c6080290f5..cafbb0991c 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_TARGET_ZYNQ_ZC770=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010" -# CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig index 123e461fbe..e6e1c3085b 100644 --- a/configs/zynq_zc770_xm011_defconfig +++ b/configs/zynq_zc770_xm011_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_TARGET_ZYNQ_ZC770=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011" -# CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index 3da5168d95..9a440097f4 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_TARGET_ZYNQ_ZC770=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm012" -# CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index 015ec7900a..95e32a525c 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_TARGET_ZYNQ_ZC770=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013" -# CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index ce414b7588..43520d0fff 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_TARGET_ZYNQ_ZED=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zed" -# CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index defcac9dda..46379e5139 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_TARGET_ZYNQ_ZYBO=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zybo" -# CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/disk/part_dos.c b/disk/part_dos.c index cf1a36ebb8..89263d38aa 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -17,6 +17,7 @@ #include <common.h> #include <command.h> #include <ide.h> +#include <memalign.h> #include "part_dos.h" #ifdef HAVE_BLOCK_DEVICE diff --git a/disk/part_efi.c b/disk/part_efi.c index 5856f93211..15627f29e8 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -16,6 +16,7 @@ #include <ide.h> #include <inttypes.h> #include <malloc.h> +#include <memalign.h> #include <part_efi.h> #include <linux/ctype.h> diff --git a/disk/part_mac.c b/disk/part_mac.c index cbcb995c48..099e0a0035 100644 --- a/disk/part_mac.c +++ b/disk/part_mac.c @@ -15,6 +15,7 @@ #include <common.h> #include <command.h> +#include <memalign.h> #include <ide.h> #include "part_mac.h" diff --git a/doc/README.omap3 b/doc/README.omap3 index a62c357405..e09ac032c0 100644 --- a/doc/README.omap3 +++ b/doc/README.omap3 @@ -68,10 +68,6 @@ make make cm_t35_config make -* BlueLYNX-X: - -make omap3_mvblx_config -make Custom commands =============== diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 9cda0bdedc..c7b4fa3de2 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -19,7 +19,6 @@ zeus powerpc ppc4xx - - Stefan Roese sbc405 powerpc ppc4xx - - pcs440ep powerpc ppc4xx - - Stefan Roese <sr@denx.de> p3p440 powerpc ppc4xx - - Stefan Roese <sr@denx.de> -lwmon5 powerpc ppc4xx - - Stefan Roese <sr@denx.de> csb272/csb472 powerpc ppc4xx - - Tolunay Orkun <torkun@nextio.com> alpr powerpc ppc4xx - - Stefan Roese <sr@denx.de> cam_enc_4xx arm arm926ejs 8d775763 2015-08-20 Heiko Schocher <hs@denx.de> diff --git a/doc/README.switch_config b/doc/README.switch_config deleted file mode 100644 index f8903738e1..0000000000 --- a/doc/README.switch_config +++ /dev/null @@ -1,25 +0,0 @@ -On the enbw_cmc board is a KSZ8864RMN switch which needs -configured through spi before working. This is done on -startup from u-boot through a config file stored at an -address specified in the "hwconfig" environment variable, -subcommand "config". - -For example on the enbw_cmc board: - -hwconfig=switch:lan=on,pwl=off,config=0x60160000 - -The file has the following structure: - -- a comment starts with a '#' or a ';' and ends with a newline -- The switch needs for its config a reg/value pair, so we - have two columns in the file: - reg : contains the register address - value: contains a 8 bit register value - This 2 columns are seperated through space or tab. - -example (minimal configuration on the enbw_cmc board): - -;reg value comment -;----------------------------------------- -0x01 0x00 -0x01 0x01 ; Start Switch with this configuration diff --git a/doc/README.uniphier b/doc/README.uniphier index e936f40254..6ba0320f4f 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -44,6 +44,18 @@ PH1-sLD8: $ make ph1_sld8_defconfig $ make CROSS_COMPILE=arm-linux-gnueabi- +PH1-Pro5: + $ make ph1_pro5_defconfig + $ make CROSS_COMPILE=arm-linux-gnueabi- + +ProXstream2: + $ make pxs2_defconfig + $ make CROSS_COMPILE=arm-linux-gnueabi- + +PH1-LD6b: + $ make ph1_ld6b_defconfig + $ make CROSS_COMPILE=arm-linux-gnueabi- + You may wish to change the "CROSS_COMPILE=arm-linux-gnueabi-" to use your favorite compiler. diff --git a/doc/README.watchdog b/doc/README.watchdog index 59f306b851..b66fd6cb8a 100644 --- a/doc/README.watchdog +++ b/doc/README.watchdog @@ -27,6 +27,7 @@ CONFIG_IMX_WATCHDOG Available for i.mx31/35/5x/6x to service the watchdog. This is not automatically set because some boards (vision2) still need to define their own hw_watchdog_reset routine. + TODO: vision2 is removed now, so perhaps this can be changed. CONFIG_XILINX_TB_WATCHDOG Available for Xilinx Axi platforms to service timebase watchdog timer. diff --git a/doc/README.x86 b/doc/README.x86 index 5f9c46f05d..6cf293b11e 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -733,11 +733,36 @@ Example output: PCI_BDF(0, 3, 0) INTA PIRQA ... +Porting Hints +------------- + +Quark-specific considerations: + +To port U-Boot to other boards based on the Intel Quark SoC, a few things need +to be taken care of. The first important part is the Memory Reference Code (MRC) +parameters. Quark MRC supports memory-down configuration only. All these MRC +parameters are supplied via the board device tree. To get started, first copy +the MRC section of arch/x86/dts/galileo.dts to your board's device tree, then +change these values by consulting board manuals or your hardware vendor. +Available MRC parameter values are listed in include/dt-bindings/mrc/quark.h. +The other tricky part is with PCIe. Quark SoC integrates two PCIe root ports, +but by default they are held in reset after power on. In U-Boot, PCIe +initialization is properly handled as per Quark's firmware writer guide. +In your board support codes, you need provide two routines to aid PCIe +initialization, which are board_assert_perst() and board_deassert_perst(). +The two routines need implement a board-specific mechanism to assert/deassert +PCIe PERST# pin. Care must be taken that in those routines that any APIs that +may trigger PCI enumeration process are strictly forbidden, as any access to +PCIe root port's configuration registers will cause system hang while it is +held in reset. For more details, check how they are implemented by the Intel +Galileo board support codes in board/intel/galileo/galileo.c. + TODO List --------- - Audio - Chrome OS verified boot - SMI and ACPI support, to provide platform info and facilities to Linux +- Desktop Management Interface (DMI) [15] support References ---------- @@ -755,3 +780,4 @@ References [12] http://events.linuxfoundation.org/sites/events/files/slides/chromeos_and_diy_vboot_0.pdf [13] http://events.linuxfoundation.org/sites/events/files/slides/elce-2014.pdf [14] doc/device-tree-bindings/misc/intel,irq-router.txt +[15] http://en.wikipedia.org/wiki/Desktop_Management_Interface diff --git a/doc/git-mailrc b/doc/git-mailrc index 598bb3eba5..6fe78a1d08 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -12,6 +12,7 @@ alias u-boot uboot # things simple and easy to look up/coordinate. alias aaribaud Albert Aribaud <albert.u.boot@aribaud.net> alias abiessmann Andreas Bießmann <andreas.devel@googlemail.com> +alias abrodkin Alexey Brodkin <alexey.brodkin@synopsys.com> alias afleming Andy Fleming <afleming@gmail.com> alias ag Anatolij Gustschin <agust@denx.de> alias alisonwang Alison Wang <alison.wang@freescale.com> @@ -50,9 +51,11 @@ alias vapier Mike Frysinger <vapier@gentoo.org> alias wd Wolfgang Denk <wd@denx.de> # Architecture aliases -alias arch arm, avr32, bfin, m68k, microblaze, mips, nds32, nios2, powerpc, sandbox, superh, sparc, x86 +alias arch arc, arm, avr32, bfin, m68k, microblaze, mips, nds32, nios2, powerpc, sandbox, superh, sparc, x86 alias arches arch +alias arc uboot, abrodkin + alias arm uboot, aaribaud alias at91 uboot, abiessmann alias davinci ti diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 0d19dd25a3..82c68439f8 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -15,6 +15,7 @@ #include <asm/errno.h> #include <asm/io.h> #include <malloc.h> +#include <memalign.h> #include <scsi.h> #include <libata.h> #include <linux/ctype.h> diff --git a/drivers/core/device.c b/drivers/core/device.c index 0ccd443f25..833a803696 100644 --- a/drivers/core/device.c +++ b/drivers/core/device.c @@ -289,8 +289,12 @@ int device_probe_child(struct udevice *dev, void *parent_priv) dev->flags |= DM_FLAG_ACTIVATED; - /* continue regardless of the result of pinctrl */ - pinctrl_select_state(dev, "default"); + /* + * Process pinctrl for everything except the root device, and + * continue regardless of the result of pinctrl. + */ + if (dev->parent) + pinctrl_select_state(dev, "default"); ret = uclass_pre_probe_device(dev); if (ret) @@ -581,7 +585,10 @@ fdt_addr_t dev_get_addr(struct udevice *dev) #if CONFIG_IS_ENABLED(OF_CONTROL) fdt_addr_t addr; - addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); + addr = fdtdec_get_addr_size_auto_parent(gd->fdt_blob, + dev->parent->of_offset, + dev->of_offset, "reg", + 0, NULL); if (CONFIG_IS_ENABLED(SIMPLE_BUS) && addr != FDT_ADDR_T_NONE) { if (device_get_uclass_id(dev->parent) == UCLASS_SIMPLE_BUS) addr = simple_bus_translate(dev->parent, addr); diff --git a/drivers/ddr/marvell/a38x/ddr3_init.h b/drivers/ddr/marvell/a38x/ddr3_init.h index e2ff040b00..cb3fb24416 100644 --- a/drivers/ddr/marvell/a38x/ddr3_init.h +++ b/drivers/ddr/marvell/a38x/ddr3_init.h @@ -32,8 +32,6 @@ */ #define MV_DEBUG_INIT -#define BIT(x) (1 << (x)) - #ifdef MV_DEBUG_INIT #define DEBUG_INIT_S(s) puts(s) #define DEBUG_INIT_D(d, l) printf("%x", d) diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index 6cf240de22..8f5915e49c 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -164,7 +164,6 @@ static int dfu_write_buffer_drain(struct dfu_entity *dfu) void dfu_write_transaction_cleanup(struct dfu_entity *dfu) { /* clear everything */ - dfu_free_buf(); dfu->crc = 0; dfu->offset = 0; dfu->i_blk_seq_num = 0; @@ -339,17 +338,6 @@ int dfu_read(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) dfu->r_left = dfu->get_medium_size(dfu); if (dfu->r_left < 0) return dfu->r_left; - switch (dfu->layout) { - case DFU_RAW_ADDR: - case DFU_RAM_ADDR: - break; - default: - if (dfu->r_left > dfu_buf_size) { - printf("%s: File too big for buffer\n", - __func__); - return -EOVERFLOW; - } - } debug("%s: %s %ld [B]\n", __func__, dfu->name, dfu->r_left); @@ -385,7 +373,6 @@ int dfu_read(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num) dfu_hash_algo->name, dfu->crc); puts("\nUPLOAD ... done\nCtrl+C to exit ...\n"); - dfu_free_buf(); dfu->i_blk_seq_num = 0; dfu->crc = 0; dfu->offset = 0; @@ -433,6 +420,7 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt, __func__, interface); return -1; } + dfu_get_buf(dfu); return 0; } @@ -441,6 +429,7 @@ void dfu_free_entities(void) { struct dfu_entity *dfu, *p, *t = NULL; + dfu_free_buf(); list_for_each_entry_safe_reverse(dfu, p, &dfu_list, list) { list_del(&dfu->list); if (dfu->free_entity) diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c index 2a780f7b5d..5a9fb4a6e2 100644 --- a/drivers/dfu/dfu_mmc.c +++ b/drivers/dfu/dfu_mmc.c @@ -18,6 +18,7 @@ static unsigned char *dfu_file_buf; static long dfu_file_buf_len; +static long dfu_file_buf_filled; static int mmc_access_part(struct dfu_entity *dfu, struct mmc *mmc, int part) { @@ -230,9 +231,12 @@ long dfu_get_medium_size_mmc(struct dfu_entity *dfu) return dfu->data.mmc.lba_size * dfu->data.mmc.lba_blk_size; case DFU_FS_FAT: case DFU_FS_EXT4: + dfu_file_buf_filled = -1; ret = mmc_file_op(DFU_OP_SIZE, dfu, NULL, &len); if (ret < 0) return ret; + if (len > CONFIG_SYS_DFU_MAX_FILE_SIZE) + return -1; return len; default: printf("%s: Layout (%s) not (yet) supported!\n", __func__, @@ -241,6 +245,27 @@ long dfu_get_medium_size_mmc(struct dfu_entity *dfu) } } +static int mmc_file_unbuffer(struct dfu_entity *dfu, u64 offset, void *buf, + long *len) +{ + int ret; + long file_len; + + if (dfu_file_buf_filled == -1) { + ret = mmc_file_op(DFU_OP_READ, dfu, dfu_file_buf, &file_len); + if (ret < 0) + return ret; + dfu_file_buf_filled = file_len; + } + if (offset + *len > dfu_file_buf_filled) + return -EINVAL; + + /* Add to the current buffer. */ + memcpy(buf, dfu_file_buf + offset, *len); + + return 0; +} + int dfu_read_medium_mmc(struct dfu_entity *dfu, u64 offset, void *buf, long *len) { @@ -252,7 +277,7 @@ int dfu_read_medium_mmc(struct dfu_entity *dfu, u64 offset, void *buf, break; case DFU_FS_FAT: case DFU_FS_EXT4: - ret = mmc_file_op(DFU_OP_READ, dfu, buf, len); + ret = mmc_file_unbuffer(dfu, offset, buf, len); break; default: printf("%s: Layout (%s) not (yet) supported!\n", __func__, diff --git a/drivers/gpio/lpc32xx_gpio.c b/drivers/gpio/lpc32xx_gpio.c index 8a9826e6eb..9674ee75f0 100644 --- a/drivers/gpio/lpc32xx_gpio.c +++ b/drivers/gpio/lpc32xx_gpio.c @@ -22,7 +22,7 @@ * read on another one. * * In order to keep this code simple, GPIOS are considered here as - * homogeneous and linear, from 0 to 127. + * homogeneous and linear, from 0 to 159. * * ** WARNING #1 ** * @@ -35,7 +35,7 @@ * Please read NOTE in description of lpc32xx_gpio_get_function(). */ -#define LPC32XX_GPIOS 128 +#define LPC32XX_GPIOS 160 struct lpc32xx_gpio_priv { struct gpio_regs *regs; @@ -45,11 +45,18 @@ struct lpc32xx_gpio_priv { /** * We have 4 GPIO ports of 32 bits each + * + * Port mapping offset (32 bits each): + * - Port 0: 0 + * - Port 1: 32 + * - Port 2: 64 + * - Port 3: GPO / GPIO (output): 96 + * - Port 3: GPI: 128 */ -#define MAX_GPIO 128 +#define MAX_GPIO 160 -#define GPIO_TO_PORT(gpio) ((gpio / 32) & 3) +#define GPIO_TO_PORT(gpio) ((gpio / 32) & 7) #define GPIO_TO_RANK(gpio) (gpio % 32) #define GPIO_TO_MASK(gpio) (1 << (gpio % 32)) @@ -75,9 +82,16 @@ static int lpc32xx_gpio_direction_input(struct udevice *dev, unsigned offset) break; case 2: /* ports 2 and 3 share a common direction */ - case 3: writel(mask, ®s->p2_p3_dir_clr); break; + case 3: + /* Setup direction only for GPIO_xx. */ + if ((mask >= 25) && (mask <= 30)) + writel(mask, ®s->p2_p3_dir_clr); + break; + case 4: + /* GPI_xx; nothing to do. */ + break; default: return -1; } @@ -111,6 +125,11 @@ static int lpc32xx_gpio_get_value(struct udevice *dev, unsigned offset) value = readl(®s->p2_inp_state); break; case 3: + /* Read GPO_xx and GPIO_xx (as output) using p3_outp_state. */ + value = readl(®s->p3_outp_state); + break; + case 4: + /* Read GPI_xx and GPIO_xx (as input) using p3_inp_state. */ value = readl(®s->p3_inp_state); break; default: @@ -149,6 +168,8 @@ static int gpio_set(struct udevice *dev, unsigned gpio) case 3: writel(mask, ®s->p3_outp_set); break; + case 4: + /* GPI_xx; invalid. */ default: return -1; } @@ -181,6 +202,8 @@ static int gpio_clr(struct udevice *dev, unsigned gpio) case 3: writel(mask, ®s->p3_outp_clr); break; + case 4: + /* GPI_xx; invalid. */ default: return -1; } @@ -223,9 +246,15 @@ static int lpc32xx_gpio_direction_output(struct udevice *dev, unsigned offset, break; case 2: /* ports 2 and 3 share a common direction */ - case 3: writel(mask, ®s->p2_p3_dir_set); break; + case 3: + /* Setup direction only for GPIO_xx. */ + if ((mask >= 25) && (mask <= 30)) + writel(mask, ®s->p2_p3_dir_set); + break; + case 4: + /* GPI_xx; invalid. */ default: return -1; } diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c index 17fcfbf4d3..0f22b238ba 100644 --- a/drivers/gpio/s5p_gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -341,18 +341,22 @@ static int gpio_exynos_bind(struct udevice *parent) plat = calloc(1, sizeof(*plat)); if (!plat) return -ENOMEM; - reg = fdtdec_get_addr(blob, node, "reg"); - if (reg != FDT_ADDR_T_NONE) - bank = (struct s5p_gpio_bank *)((ulong)base + reg); - plat->bank = bank; - plat->bank_name = fdt_get_name(blob, node, NULL); - debug("dev at %p: %s\n", bank, plat->bank_name); + plat->bank_name = fdt_get_name(blob, node, NULL); ret = device_bind(parent, parent->driver, - plat->bank_name, plat, -1, &dev); + plat->bank_name, plat, -1, &dev); if (ret) return ret; + dev->of_offset = node; + + reg = dev_get_addr(dev); + if (reg != FDT_ADDR_T_NONE) + bank = (struct s5p_gpio_bank *)((ulong)base + reg); + + plat->bank = bank; + + debug("dev at %p: %s\n", bank, plat->bank_name); } return 0; diff --git a/drivers/gpio/sh_pfc.c b/drivers/gpio/sh_pfc.c index 7a5af20a2a..a0eac137c2 100644 --- a/drivers/gpio/sh_pfc.c +++ b/drivers/gpio/sh_pfc.c @@ -75,7 +75,8 @@ static int gpio_read_bit(struct pinmux_data_reg *dr, debug("read_bit: addr = %lx, pos = %ld, " "r_width = %ld\n", dr->reg, pos, dr->reg_width); - return (gpio_read_raw_reg(dr->mapped_reg, dr->reg_width) >> pos) & 1; + return + (gpio_read_raw_reg(dr->mapped_reg + 0x4, dr->reg_width) >> pos) & 1; } static void gpio_write_bit(struct pinmux_data_reg *dr, diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c index 4921f0ff42..8e880e276f 100644 --- a/drivers/gpio/tegra_gpio.c +++ b/drivers/gpio/tegra_gpio.c @@ -1,6 +1,6 @@ /* * NVIDIA Tegra20 GPIO handling. - * (C) Copyright 2010-2012 + * (C) Copyright 2010-2012,2015 * NVIDIA Corporation <www.nvidia.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -25,12 +25,10 @@ DECLARE_GLOBAL_DATA_PTR; -enum { - TEGRA_CMD_INFO, - TEGRA_CMD_PORT, - TEGRA_CMD_OUTPUT, - TEGRA_CMD_INPUT, -}; +static const int CONFIG_SFIO = 0; +static const int CONFIG_GPIO = 1; +static const int DIRECTION_INPUT = 0; +static const int DIRECTION_OUTPUT = 1; struct tegra_gpio_platdata { struct gpio_ctlr_bank *bank; @@ -44,7 +42,7 @@ struct tegra_port_info { int base_gpio; /* Port number for this port (0, 1,.., n-1) */ }; -/* Return config of pin 'gpio' as GPIO (1) or SFPIO (0) */ +/* Return config of pin 'gpio' as GPIO (1) or SFIO (0) */ static int get_config(unsigned gpio) { struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE; @@ -53,15 +51,15 @@ static int get_config(unsigned gpio) int type; u = readl(&bank->gpio_config[GPIO_PORT(gpio)]); - type = (u >> GPIO_BIT(gpio)) & 1; + type = (u >> GPIO_BIT(gpio)) & 1; debug("get_config: port = %d, bit = %d is %s\n", GPIO_FULLPORT(gpio), GPIO_BIT(gpio), type ? "GPIO" : "SFPIO"); - return type; + return type ? CONFIG_GPIO : CONFIG_SFIO; } -/* Config pin 'gpio' as GPIO or SFPIO, based on 'type' */ +/* Config pin 'gpio' as GPIO or SFIO, based on 'type' */ static void set_config(unsigned gpio, int type) { struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE; @@ -72,7 +70,7 @@ static void set_config(unsigned gpio, int type) GPIO_FULLPORT(gpio), GPIO_BIT(gpio), type ? "GPIO" : "SFPIO"); u = readl(&bank->gpio_config[GPIO_PORT(gpio)]); - if (type) /* GPIO */ + if (type != CONFIG_SFIO) u |= 1 << GPIO_BIT(gpio); else u &= ~(1 << GPIO_BIT(gpio)); @@ -93,7 +91,7 @@ static int get_direction(unsigned gpio) debug("get_direction: port = %d, bit = %d, %s\n", GPIO_FULLPORT(gpio), GPIO_BIT(gpio), dir ? "OUT" : "IN"); - return dir; + return dir ? DIRECTION_OUTPUT : DIRECTION_INPUT; } /* Config GPIO pin 'gpio' as input or output (OE) as per 'output' */ @@ -107,7 +105,7 @@ static void set_direction(unsigned gpio, int output) GPIO_FULLPORT(gpio), GPIO_BIT(gpio), output ? "OUT" : "IN"); u = readl(&bank->gpio_dir_out[GPIO_PORT(gpio)]); - if (output) + if (output != DIRECTION_INPUT) u |= 1 << GPIO_BIT(gpio); else u &= ~(1 << GPIO_BIT(gpio)); @@ -136,24 +134,16 @@ static void set_level(unsigned gpio, int high) * Generic_GPIO primitives. */ -static int tegra_gpio_request(struct udevice *dev, unsigned offset, - const char *label) -{ - struct tegra_port_info *state = dev_get_priv(dev); - - /* Configure as a GPIO */ - set_config(state->base_gpio + offset, 1); - - return 0; -} - /* set GPIO pin 'gpio' as an input */ static int tegra_gpio_direction_input(struct udevice *dev, unsigned offset) { struct tegra_port_info *state = dev_get_priv(dev); /* Configure GPIO direction as input. */ - set_direction(state->base_gpio + offset, 0); + set_direction(state->base_gpio + offset, DIRECTION_INPUT); + + /* Enable the pin as a GPIO */ + set_config(state->base_gpio + offset, 1); return 0; } @@ -169,7 +159,10 @@ static int tegra_gpio_direction_output(struct udevice *dev, unsigned offset, set_level(gpio, value); /* Configure GPIO direction as output. */ - set_direction(gpio, 1); + set_direction(gpio, DIRECTION_OUTPUT); + + /* Enable the pin as a GPIO */ + set_config(state->base_gpio + offset, 1); return 0; } @@ -211,16 +204,18 @@ void gpio_config_table(const struct tegra_gpio_config *config, int len) for (i = 0; i < len; i++) { switch (config[i].init) { case TEGRA_GPIO_INIT_IN: - gpio_direction_input(config[i].gpio); + set_direction(config[i].gpio, DIRECTION_INPUT); break; case TEGRA_GPIO_INIT_OUT0: - gpio_direction_output(config[i].gpio, 0); + set_level(config[i].gpio, 0); + set_direction(config[i].gpio, DIRECTION_OUTPUT); break; case TEGRA_GPIO_INIT_OUT1: - gpio_direction_output(config[i].gpio, 1); + set_level(config[i].gpio, 1); + set_direction(config[i].gpio, DIRECTION_OUTPUT); break; } - set_config(config[i].gpio, 1); + set_config(config[i].gpio, CONFIG_GPIO); } } @@ -254,7 +249,6 @@ static int tegra_gpio_xlate(struct udevice *dev, struct gpio_desc *desc, } static const struct dm_gpio_ops gpio_tegra_ops = { - .request = tegra_gpio_request, .direction_input = tegra_gpio_direction_input, .direction_output = tegra_gpio_direction_output, .get_value = tegra_gpio_get_value, diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 8ce294b02a..32198bd5b2 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o obj-$(CONFIG_I2C_MV) += mv_i2c.o obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o -obj-$(CONFIG_U8500_I2C) += u8500_i2c.o obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o obj-$(CONFIG_SYS_I2C) += i2c_core.o obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index f1056e21a2..0f977d706d 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -612,16 +612,22 @@ static u32 mxc_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed) /* * Register mxc i2c adapters */ +#ifdef CONFIG_SYS_I2C_MXC_I2C1 U_BOOT_I2C_ADAP_COMPLETE(mxc0, mxc_i2c_init, mxc_i2c_probe, mxc_i2c_read, mxc_i2c_write, mxc_i2c_set_bus_speed, CONFIG_SYS_MXC_I2C1_SPEED, CONFIG_SYS_MXC_I2C1_SLAVE, 0) +#endif + +#ifdef CONFIG_SYS_I2C_MXC_I2C2 U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe, mxc_i2c_read, mxc_i2c_write, mxc_i2c_set_bus_speed, CONFIG_SYS_MXC_I2C2_SPEED, CONFIG_SYS_MXC_I2C2_SLAVE, 1) +#endif + #ifdef CONFIG_SYS_I2C_MXC_I2C3 U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe, mxc_i2c_read, mxc_i2c_write, diff --git a/drivers/i2c/u8500_i2c.c b/drivers/i2c/u8500_i2c.c deleted file mode 100644 index 81ffb8ed79..0000000000 --- a/drivers/i2c/u8500_i2c.c +++ /dev/null @@ -1,601 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Basic U-Boot I2C interface for STn8500/DB8500 - * Author: Michael Brandt <Michael.Brandt@stericsson.com> for ST-Ericsson - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Only 7-bit I2C device addresses are supported. - */ - -#include <common.h> -#include <i2c.h> - -#include "u8500_i2c.h" -#include <asm/io.h> -#include <asm/arch/clock.h> - -#define U8500_I2C_ENDAD_COUNTER (CONFIG_SYS_HZ/100) /* I2C bus timeout */ -#define U8500_I2C_FIFO_FLUSH_COUNTER 500000 /* flush "timeout" */ -#define U8500_I2C_SCL_FREQ 100000 /* I2C bus clock freq */ -#define U8500_I2C_INPUT_FREQ 48000000 /* Input clock freq */ -#define TX_FIFO_THRESHOLD 0x4 -#define RX_FIFO_THRESHOLD 0x4 -#define SLAVE_SETUP_TIME 14 /* Slave data setup time, 250ns for 48MHz i2c_clk */ - -#define WRITE_FIELD(var, mask, shift, value) \ - (var = ((var & ~(mask)) | ((value) << (shift)))) - -static unsigned int bus_initialized[CONFIG_SYS_U8500_I2C_BUS_MAX]; -static unsigned int i2c_bus_num; -static unsigned int i2c_bus_speed[] = { - CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED, - CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED -}; -static struct u8500_i2c_regs *i2c_dev[] = { - (struct u8500_i2c_regs *)CONFIG_SYS_U8500_I2C0_BASE, - (struct u8500_i2c_regs *)CONFIG_SYS_U8500_I2C1_BASE, - (struct u8500_i2c_regs *)CONFIG_SYS_U8500_I2C2_BASE, - (struct u8500_i2c_regs *)CONFIG_SYS_U8500_I2C3_BASE, -}; - -static struct { - int periph; - int pcken; - int kcken; -} i2c_clock_bits[] = { - {3, 3, 3}, /* I2C0 */ - {1, 2, 2}, /* I2C1 */ - {1, 6, 6}, /* I2C2 */ - {2, 0, 0}, /* I2C3 */ -}; - -static void i2c_set_bit(void *reg, u32 mask) -{ - writel(readl(reg) | mask, reg); -} - -static void i2c_clr_bit(void *reg, u32 mask) -{ - writel(readl(reg) & ~mask, reg); -} - -static void i2c_write_field(void *reg, u32 mask, uint shift, u32 value) -{ - writel((readl(reg) & ~mask) | (value << shift), reg); -} - -static int __i2c_set_bus_speed(unsigned int speed) -{ - u32 value; - struct u8500_i2c_regs *i2c_regs; - - i2c_regs = i2c_dev[i2c_bus_num]; - - /* Select standard (100 kbps) speed mode */ - i2c_write_field(&i2c_regs->cr, U8500_I2C_CR_SM, - U8500_I2C_CR_SHIFT_SM, 0x0); - - /* - * Set the Baud Rate Counter 2 value - * Baud rate (standard) = fi2cclk / ( (BRCNT2 x 2) + Foncycle ) - * Foncycle = 0 (no digital filtering) - */ - value = (u32) (U8500_I2C_INPUT_FREQ / (speed * 2)); - i2c_write_field(&i2c_regs->brcr, U8500_I2C_BRCR_BRCNT2, - U8500_I2C_BRCR_SHIFT_BRCNT2, value); - - /* ensure that BRCNT value is zero */ - i2c_write_field(&i2c_regs->brcr, U8500_I2C_BRCR_BRCNT1, - U8500_I2C_BRCR_SHIFT_BRCNT1, 0); - - return U8500_I2C_INPUT_FREQ/(value * 2); -} - -/* - * i2c_init - initialize the i2c bus - * - * speed: bus speed (in HZ) - * slaveaddr: address of device in slave mode - * - * Slave mode is not implemented. - */ -void i2c_init(int speed, int slaveaddr) -{ - struct u8500_i2c_regs *i2c_regs; - - debug("i2c_init bus %d, speed %d\n", i2c_bus_num, speed); - - u8500_clock_enable(i2c_clock_bits[i2c_bus_num].periph, - i2c_clock_bits[i2c_bus_num].pcken, - i2c_clock_bits[i2c_bus_num].kcken); - - i2c_regs = i2c_dev[i2c_bus_num]; - - /* Disable the controller */ - i2c_clr_bit(&i2c_regs->cr, U8500_I2C_CR_PE); - - /* Clear registers */ - writel(0, &i2c_regs->cr); - writel(0, &i2c_regs->scr); - writel(0, &i2c_regs->hsmcr); - writel(0, &i2c_regs->tftr); - writel(0, &i2c_regs->rftr); - writel(0, &i2c_regs->dmar); - - i2c_bus_speed[i2c_bus_num] = __i2c_set_bus_speed(speed); - - /* - * Set our own address. - * Set slave address mode to 7 bit addressing mode - */ - i2c_clr_bit(&i2c_regs->cr, U8500_I2C_CR_SAM); - i2c_write_field(&i2c_regs->scr, U8500_I2C_SCR_ADDR, - U8500_I2C_SCR_SHIFT_ADDR, slaveaddr); - /* Slave Data Set up Time */ - i2c_write_field(&i2c_regs->scr, U8500_I2C_SCR_DATA_SETUP_TIME, - U8500_I2C_SCR_SHIFT_DATA_SETUP_TIME, SLAVE_SETUP_TIME); - - /* Disable the DMA sync logic */ - i2c_write_field(&i2c_regs->cr, U8500_I2C_CR_DMA_SLE, - U8500_I2C_CR_SHIFT_DMA_SLE, 0); - - /* Disable interrupts */ - writel(0, &i2c_regs->imscr); - - /* Configure bus master mode */ - i2c_write_field(&i2c_regs->cr, U8500_I2C_CR_OM, U8500_I2C_CR_SHIFT_OM, - U8500_I2C_BUS_MASTER_MODE); - /* Set FIFO threshold values */ - writel(TX_FIFO_THRESHOLD, &i2c_regs->tftr); - writel(RX_FIFO_THRESHOLD, &i2c_regs->rftr); - - /* Enable the I2C Controller */ - i2c_set_bit(&i2c_regs->cr, U8500_I2C_CR_PE); - - bus_initialized[i2c_bus_num] = 1; -} - - -/* - * loop_till_bit_clear - polls on a bit till it clears - * ioreg: register where you want to check status - * mask: bit mask for the bit you wish to check - * timeout: timeout in ticks/s - */ -static int loop_till_bit_clear(void *io_reg, u32 mask, unsigned long timeout) -{ - unsigned long timebase = get_timer(0); - - do { - if ((readl(io_reg) & mask) == 0x0UL) - return 0; - } while (get_timer(timebase) < timeout); - - debug("loop_till_bit_clear timed out\n"); - return -1; -} - -/* - * loop_till_bit_set - polls on a bit till it is set. - * ioreg: register where you want to check status - * mask: bit mask for the bit you wish to check - * timeout: timeout in ticks/s - */ -static int loop_till_bit_set(void *io_reg, u32 mask, unsigned long timeout) -{ - unsigned long timebase = get_timer(0); - - do { - if ((readl(io_reg) & mask) != 0x0UL) - return 0; - } while (get_timer(timebase) < timeout); - - debug("loop_till_bit_set timed out\n"); - return -1; -} - -/* - * flush_fifo - flush the I2C TX and RX FIFOs - */ -static void flush_fifo(struct u8500_i2c_regs *i2c_regs) -{ - int counter = U8500_I2C_FIFO_FLUSH_COUNTER; - - /* Flush Tx FIFO */ - i2c_set_bit(&i2c_regs->cr, U8500_I2C_CR_FTX); - /* Flush Rx FIFO */ - i2c_set_bit(&i2c_regs->cr, U8500_I2C_CR_FRX); - while (counter--) { - if (!(readl(&i2c_regs->cr) & - (U8500_I2C_CR_FTX | U8500_I2C_CR_FRX))) - break; - } - return; -} - -#ifdef DEBUG -static void print_abort_reason(struct u8500_i2c_regs *i2c_regs) -{ - int cause; - - printf("abort: risr %08x, sr %08x\n", i2c_regs->risr, i2c_regs->sr); - cause = (readl(&i2c_regs->sr) & U8500_I2C_SR_CAUSE) >> - U8500_I2C_SR_SHIFT_CAUSE; - switch (cause) { - case U8500_I2C_NACK_ADDR: - printf("No Ack received after Slave Address xmission\n"); - break; - case U8500_I2C_NACK_DATA: - printf("Valid for MASTER_WRITE: No Ack received " - "during data phase\n"); - break; - case U8500_I2C_ACK_MCODE: - printf("Master recv ack after xmission of master code" - "in hs mode\n"); - break; - case U8500_I2C_ARB_LOST: - printf("Master Lost arbitration\n"); - break; - case U8500_I2C_BERR_START: - printf("Slave restarts\n"); - break; - case U8500_I2C_BERR_STOP: - printf("Slave reset\n"); - break; - case U8500_I2C_OVFL: - printf("Overflow\n"); - break; - default: - printf("Unknown error type\n"); - } -} -#endif - -/* - * i2c_abort - called when a I2C transaction failed - */ -static void i2c_abort(struct u8500_i2c_regs *i2c_regs) -{ -#ifdef DEBUG - print_abort_reason(i2c_regs); -#endif - /* flush RX and TX fifos */ - flush_fifo(i2c_regs); - - /* Acknowledge the Master Transaction Done */ - i2c_set_bit(&i2c_regs->icr, U8500_I2C_INT_MTD); - - /* Acknowledge the Master Transaction Done Without Stop */ - i2c_set_bit(&i2c_regs->icr, U8500_I2C_INT_MTDWS); - - i2c_init(i2c_bus_speed[i2c_bus_num], CONFIG_SYS_I2C_SLAVE); -} - -/* - * write addr, alias index, to I2C bus. - */ -static int i2c_write_addr(struct u8500_i2c_regs *i2c_regs, uint addr, int alen) -{ - while (alen--) { - /* Wait until the Tx Fifo is not full */ - if (loop_till_bit_clear((void *)&i2c_regs->risr, - U8500_I2C_INT_TXFF, - U8500_I2C_ENDAD_COUNTER)) { - i2c_abort(i2c_regs); - return -1; - } - - /* MSB first */ - writeb((addr >> (alen * 8)) & 0xff, &i2c_regs->tfr); - } - - return 0; -} - -/* - * Internal simplified read function: - * i2c_regs: Pointer to I2C registers for current bus - * chip: I2C chip address, range 0..127 - * addr: Memory (register) address within the chip - * alen: Number of bytes to use for addr (typically 1, 2 for larger - * memories, 0 for register type devices with only one register) - * value: Where to put the data - * - * Returns: 0 on success, not 0 on failure - */ -static int i2c_read_byte(struct u8500_i2c_regs *i2c_regs, uchar chip, - uint addr, int alen, uchar *value) -{ - u32 mcr = 0; - - /* Set the address mode to 7 bit */ - WRITE_FIELD(mcr, U8500_I2C_MCR_AM, U8500_I2C_MCR_SHIFT_AM, 1); - - /* Store the slave address in the master control register */ - WRITE_FIELD(mcr, U8500_I2C_MCR_A7, U8500_I2C_MCR_SHIFT_A7, chip); - - if (alen != 0) { - /* Master write operation */ - mcr &= ~(U8500_I2C_MCR_OP); - - /* Configure the Frame length to one byte */ - WRITE_FIELD(mcr, U8500_I2C_MCR_LENGTH, - U8500_I2C_MCR_SHIFT_LENGTH, 1); - - /* Repeated start, no stop */ - mcr &= ~(U8500_I2C_MCR_STOP); - - /* Write Master Control Register */ - writel(mcr, &i2c_regs->mcr); - - /* send addr/index */ - if (i2c_write_addr(i2c_regs, addr, alen) != 0) - return -1; - - /* Check for the Master Transaction Done Without Stop */ - if (loop_till_bit_set((void *)&i2c_regs->risr, - U8500_I2C_INT_MTDWS, - U8500_I2C_ENDAD_COUNTER)) { - return -1; - } - - /* Acknowledge the Master Transaction Done Without Stop */ - i2c_set_bit(&i2c_regs->icr, U8500_I2C_INT_MTDWS); - } - - /* Master control configuration for read operation */ - mcr |= U8500_I2C_MCR_OP; - - /* Configure the STOP condition, we read only one byte */ - mcr |= U8500_I2C_MCR_STOP; - - /* Set the frame length to one byte, we support only 1 byte reads */ - WRITE_FIELD(mcr, U8500_I2C_MCR_LENGTH, U8500_I2C_MCR_SHIFT_LENGTH, 1); - - i2c_write_field(&i2c_regs->mcr, U8500_I2C_MCR_LENGTH_STOP_OP, - U8500_I2C_MCR_SHIFT_LENGTH_STOP_OP, mcr); - - /* - * receive_data_polling - */ - - /* Wait until the Rx FIFO is not empty */ - if (loop_till_bit_clear((void *)&i2c_regs->risr, - U8500_I2C_INT_RXFE, - U8500_I2C_ENDAD_COUNTER)) - return -1; - - /* Read the data byte from Rx FIFO */ - *value = readb(&i2c_regs->rfr); - - /* Wait until the work is done */ - if (loop_till_bit_set((void *)&i2c_regs->risr, U8500_I2C_INT_MTD, - U8500_I2C_ENDAD_COUNTER)) - return -1; - - /* Acknowledge the Master Transaction Done */ - i2c_set_bit(&i2c_regs->icr, U8500_I2C_INT_MTD); - - /* If MTD is set, Master Transaction Done Without Stop is set too */ - i2c_set_bit(&i2c_regs->icr, U8500_I2C_INT_MTDWS); - - return 0; -} - -/* - * Internal simplified write function: - * i2c_regs: Pointer to I2C registers for current bus - * chip: I2C chip address, range 0..127 - * addr: Memory (register) address within the chip - * alen: Number of bytes to use for addr (typically 1, 2 for larger - * memories, 0 for register type devices with only one register) - * data: Where to read the data - * len: How many bytes to write - * - * Returns: 0 on success, not 0 on failure - */ -static int __i2c_write(struct u8500_i2c_regs *i2c_regs, u8 chip, uint addr, - int alen, u8 *data, int len) -{ - int i; - u32 mcr = 0; - - /* Set the address mode to 7 bit */ - WRITE_FIELD(mcr, U8500_I2C_MCR_AM, U8500_I2C_MCR_SHIFT_AM, 1); - - /* Store the slave address in the master control register */ - WRITE_FIELD(mcr, U8500_I2C_MCR_A7, U8500_I2C_MCR_SHIFT_A7, chip); - - /* Write operation */ - mcr &= ~(U8500_I2C_MCR_OP); - - /* Current transaction is terminated by STOP condition */ - mcr |= U8500_I2C_MCR_STOP; - - /* Frame length: addr byte + len */ - WRITE_FIELD(mcr, U8500_I2C_MCR_LENGTH, U8500_I2C_MCR_SHIFT_LENGTH, - (alen + len)); - - /* Write MCR register */ - writel(mcr, &i2c_regs->mcr); - - if (i2c_write_addr(i2c_regs, addr, alen) != 0) - return -1; - - for (i = 0; i < len; i++) { - /* Wait until the Tx FIFO is not full */ - if (loop_till_bit_clear((void *)&i2c_regs->risr, - U8500_I2C_INT_TXFF, - U8500_I2C_ENDAD_COUNTER)) - return -1; - - /* it is a 32 bit register with upper 24 reserved R/O */ - writeb(data[i], &i2c_regs->tfr); - } - - /* Check for Master Transaction Done */ - if (loop_till_bit_set((void *)&i2c_regs->risr, - U8500_I2C_INT_MTD, - U8500_I2C_ENDAD_COUNTER)) { - printf("i2c_write_byte error2: risr %08x\n", - i2c_regs->risr); - return -1; - } - - /* Acknowledge Master Transaction Done */ - i2c_set_bit(&i2c_regs->icr, U8500_I2C_INT_MTD); - - /* Acknowledge Master Transaction Done Without Stop */ - i2c_set_bit(&i2c_regs->icr, U8500_I2C_INT_MTDWS); - - return 0; -} - -/* - * Probe the given I2C chip address. Returns 0 if a chip responded, - * not 0 on failure. - */ -int i2c_probe(uchar chip) -{ - u32 mcr = 0; - struct u8500_i2c_regs *i2c_regs; - - if (chip == CONFIG_SYS_I2C_SLAVE) - return 1; - - i2c_regs = i2c_dev[i2c_bus_num]; - - /* Set the address mode to 7 bit */ - WRITE_FIELD(mcr, U8500_I2C_MCR_AM, U8500_I2C_MCR_SHIFT_AM, 1); - - /* Store the slave address in the master control register */ - WRITE_FIELD(mcr, U8500_I2C_MCR_A10, U8500_I2C_MCR_SHIFT_A7, chip); - - /* Read operation */ - mcr |= U8500_I2C_MCR_OP; - - /* Set the frame length to one byte */ - WRITE_FIELD(mcr, U8500_I2C_MCR_LENGTH, U8500_I2C_MCR_SHIFT_LENGTH, 1); - - /* Current transaction is terminated by STOP condition */ - mcr |= U8500_I2C_MCR_STOP; - - /* Write MCR register */ - writel(mcr, &i2c_regs->mcr); - - /* Wait until the Rx Fifo is not empty */ - if (loop_till_bit_clear((void *)&i2c_regs->risr, - U8500_I2C_INT_RXFE, - U8500_I2C_ENDAD_COUNTER)) { - i2c_abort(i2c_regs); - return -1; - } - - flush_fifo(i2c_regs); - - /* Acknowledge the Master Transaction Done */ - i2c_set_bit(&i2c_regs->icr, U8500_I2C_INT_MTD); - - /* Acknowledge the Master Transaction Done Without Stop */ - i2c_set_bit(&i2c_regs->icr, U8500_I2C_INT_MTDWS); - - return 0; -} - -/* - * Read/Write interface: - * chip: I2C chip address, range 0..127 - * addr: Memory (register) address within the chip - * alen: Number of bytes to use for addr (typically 1, 2 for larger - * memories, 0 for register type devices with only one - * register) - * buffer: Where to read/write the data - * len: How many bytes to read/write - * - * Returns: 0 on success, not 0 on failure - */ -int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) -{ - int i; - int rc; - struct u8500_i2c_regs *i2c_regs; - - if (alen > 2) { - debug("I2C read: addr len %d not supported\n", alen); - return 1; - } - - i2c_regs = i2c_dev[i2c_bus_num]; - - for (i = 0; i < len; i++) { - rc = i2c_read_byte(i2c_regs, chip, addr + i, alen, &buffer[i]); - if (rc != 0) { - debug("I2C read: I/O error: %d\n", rc); - i2c_abort(i2c_regs); - return rc; - } - } - - return 0; -} - -int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) -{ - int rc; - struct u8500_i2c_regs *i2c_regs; - i2c_regs = i2c_dev[i2c_bus_num]; - - rc = __i2c_write(i2c_regs, chip, addr, alen, buffer, - len); - if (rc != 0) { - debug("I2C write: I/O error\n"); - i2c_abort(i2c_regs); - return rc; - } - return 0; -} - -int i2c_set_bus_num(unsigned int bus) -{ - if (bus > ARRAY_SIZE(i2c_dev) - 1) { - debug("i2c_set_bus_num: only up to bus %d supported\n", - ARRAY_SIZE(i2c_dev)-1); - return -1; - } - - i2c_bus_num = bus; - - if (!bus_initialized[i2c_bus_num]) - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - return 0; -} - -int i2c_set_bus_speed(unsigned int speed) -{ - - if (speed > U8500_I2C_MAX_STANDARD_SCL) { - debug("i2c_set_bus_speed: only up to %d supported\n", - U8500_I2C_MAX_STANDARD_SCL); - return -1; - } - - /* sets as side effect i2c_bus_speed[i2c_bus_num] */ - i2c_init(speed, CONFIG_SYS_I2C_SLAVE); - - return 0; -} - -unsigned int i2c_get_bus_num(void) -{ - return i2c_bus_num; -} - -unsigned int i2c_get_bus_speed(void) -{ - return i2c_bus_speed[i2c_bus_num]; -} diff --git a/drivers/i2c/u8500_i2c.h b/drivers/i2c/u8500_i2c.h deleted file mode 100644 index ceecdeede0..0000000000 --- a/drivers/i2c/u8500_i2c.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _U8500_I2C_H_ -#define _U8500_I2C_H_ - -#include <asm/types.h> -#include <asm/io.h> -#include <asm/errno.h> -#include <asm/arch/u8500.h> - -struct u8500_i2c_regs { - u32 cr; /* Control Register 0x00 */ - u32 scr; /* Slave Address Register 0x04 */ - u32 hsmcr; /* HS Master code Register 0x08 */ - u32 mcr; /* Master Control Register 0x0C */ - u32 tfr; /* Transmit Fifo Register 0x10 */ - u32 sr; /* Status Register 0x14 */ - u32 rfr; /* Receiver Fifo Register 0x18 */ - u32 tftr; /* Transmit Fifo Threshold Register 0x1C */ - u32 rftr; /* Receiver Fifo Threshold Register 0x20 */ - u32 dmar; /* DMA register 0x24 */ - u32 brcr; /* Baud Rate Counter Register 0x28 */ - u32 imscr; /* Interrupt Mask Set and Clear Register 0x2C */ - u32 risr; /* Raw interrupt status register 0x30 */ - u32 misr; /* Masked interrupt status register 0x34 */ - u32 icr; /* Interrupt Set and Clear Register 0x38 */ - u32 reserved_1[(0xFE0 - 0x3c) >> 2]; /* Reserved 0x03C to 0xFE0 */ - u32 periph_id_0; /* peripheral ID 0 0xFE0 */ - u32 periph_id_1; /* peripheral ID 1 0xFE4 */ - u32 periph_id_2; /* peripheral ID 2 0xFE8 */ - u32 periph_id_3; /* peripheral ID 3 0xFEC */ - u32 cell_id_0; /* I2C cell ID 0 0xFF0 */ - u32 cell_id_1; /* I2C cell ID 1 0xFF4 */ - u32 cell_id_2; /* I2C cell ID 2 0xFF8 */ - u32 cell_id_3; /* I2C cell ID 3 0xFFC */ -}; - - -/* Control Register */ - -/* Mask values for control register mask */ -#define U8500_I2C_CR_PE 0x0001 /* Peripheral enable */ -#define U8500_I2C_CR_OM 0x0006 /* Operation mode */ -#define U8500_I2C_CR_SAM 0x0008 /* Slave Addressing mode */ -#define U8500_I2C_CR_SM 0x0030 /* Speed mode */ -#define U8500_I2C_CR_SGCM 0x0040 /* Slave General call mode */ -#define U8500_I2C_CR_FTX 0x0080 /* Flush Transmit */ -#define U8500_I2C_CR_FRX 0x0100 /* Flush Receive */ -#define U8500_I2C_CR_DMA_TX_EN 0x0200 /* DMA TX Enable */ -#define U8500_I2C_CR_DMA_RX_EN 0x0400 /* DMA Rx Enable */ -#define U8500_I2C_CR_DMA_SLE 0x0800 /* DMA Synchronization Logic enable */ -#define U8500_I2C_CR_LM 0x1000 /* Loop back mode */ -#define U8500_I2C_CR_FON 0x6000 /* Filtering On */ - -/* shift valus for control register bit fields */ -#define U8500_I2C_CR_SHIFT_PE 0 /* Peripheral enable */ -#define U8500_I2C_CR_SHIFT_OM 1 /* Operation mode */ -#define U8500_I2C_CR_SHIFT_SAM 3 /* Slave Addressing mode */ -#define U8500_I2C_CR_SHIFT_SM 4 /* Speed mode */ -#define U8500_I2C_CR_SHIFT_SGCM 6 /* Slave General call mode */ -#define U8500_I2C_CR_SHIFT_FTX 7 /* Flush Transmit */ -#define U8500_I2C_CR_SHIFT_FRX 8 /* Flush Receive */ -#define U8500_I2C_CR_SHIFT_DMA_TX_EN 9 /* DMA TX Enable */ -#define U8500_I2C_CR_SHIFT_DMA_RX_EN 10 /* DMA Rx Enable */ -#define U8500_I2C_CR_SHIFT_DMA_SLE 11 /* DMA Synch Logic enable */ -#define U8500_I2C_CR_SHIFT_LM 12 /* Loop back mode */ -#define U8500_I2C_CR_SHIFT_FON 13 /* Filtering On */ - -/* bus operation modes */ -#define U8500_I2C_BUS_SLAVE_MODE 0 -#define U8500_I2C_BUS_MASTER_MODE 1 -#define U8500_I2C_BUS_MASTER_SLAVE_MODE 2 - - -/* Slave control register*/ - -/* Mask values slave control register */ -#define U8500_I2C_SCR_ADDR 0x3FF -#define U8500_I2C_SCR_DATA_SETUP_TIME 0xFFFF0000 - -/* Shift values for Slave control register */ -#define U8500_I2C_SCR_SHIFT_ADDR 0 -#define U8500_I2C_SCR_SHIFT_DATA_SETUP_TIME 16 - - -/* Master Control Register */ - -/* Mask values for Master control register */ -#define U8500_I2C_MCR_OP 0x00000001 /* Operation */ -#define U8500_I2C_MCR_A7 0x000000FE /* LSB bits of Address */ -#define U8500_I2C_MCR_EA10 0x00000700 /* Extended Address */ -#define U8500_I2C_MCR_SB 0x00000800 /* Start byte procedure */ -#define U8500_I2C_MCR_AM 0x00003000 /* Address type */ -#define U8500_I2C_MCR_STOP 0x00004000 /* stop condition */ -#define U8500_I2C_MCR_LENGTH 0x03FF8000 /* Frame length */ -#define U8500_I2C_MCR_A10 0x000007FE /* Enable 10 bit address */ -/* mask for length field,stop and operation */ -#define U8500_I2C_MCR_LENGTH_STOP_OP 0x3FFC001 - -/* Shift values for Master control values */ -#define U8500_I2C_MCR_SHIFT_OP 0 /* Operation */ -#define U8500_I2C_MCR_SHIFT_A7 1 /* LSB bits of Address */ -#define U8500_I2C_MCR_SHIFT_EA10 8 /* Extended Address */ -#define U8500_I2C_MCR_SHIFT_SB 11 /* Start byte procedure */ -#define U8500_I2C_MCR_SHIFT_AM 12 /* Address type */ -#define U8500_I2C_MCR_SHIFT_STOP 14 /* stop condition */ -#define U8500_I2C_MCR_SHIFT_LENGTH 15 /* Frame length */ -#define U8500_I2C_MCR_SHIFT_A10 1 /* Enable 10 bit address */ - -#define U8500_I2C_MCR_SHIFT_LENGTH_STOP_OP 0 - - -/* Status Register */ - -/* Mask values for Status register */ -#define U8500_I2C_SR_OP 0x00000003 /* Operation */ -#define U8500_I2C_SR_STATUS 0x0000000C /* Controller Status */ -#define U8500_I2C_SR_CAUSE 0x00000070 /* Abort Cause */ -#define U8500_I2C_SR_TYPE 0x00000180 /* Receive Type */ -#define U8500_I2C_SR_LENGTH 0x000FF700 /* Transfer length */ - -/* Shift values for Status register */ -#define U8500_I2C_SR_SHIFT_OP 0 /* Operation */ -#define U8500_I2C_SR_SHIFT_STATUS 2 /* Controller Status */ -#define U8500_I2C_SR_SHIFT_CAUSE 4 /* Abort Cause */ -#define U8500_I2C_SR_SHIFT_TYPE 7 /* Receive Type */ -#define U8500_I2C_SR_SHIFT_LENGTH 9 /* Transfer length */ - -/* abort cause */ -#define U8500_I2C_NACK_ADDR 0 -#define U8500_I2C_NACK_DATA 1 -#define U8500_I2C_ACK_MCODE 2 -#define U8500_I2C_ARB_LOST 3 -#define U8500_I2C_BERR_START 4 -#define U8500_I2C_BERR_STOP 5 -#define U8500_I2C_OVFL 6 - - -/* Baud rate counter registers */ - -/* Mask values for Baud rate counter register */ -#define U8500_I2C_BRCR_BRCNT2 0xFFFF /* Baud Rate Cntr BRCR for HS */ -#define U8500_I2C_BRCR_BRCNT1 0xFFFF0000 /* BRCR for Standard and Fast */ - -/* Shift values for the Baud rate counter register */ -#define U8500_I2C_BRCR_SHIFT_BRCNT2 0 -#define U8500_I2C_BRCR_SHIFT_BRCNT1 16 - - -/* Interrupt Register */ - -/* Mask values for Interrupt registers */ -#define U8500_I2C_INT_TXFE 0x00000001 /* Tx fifo empty */ -#define U8500_I2C_INT_TXFNE 0x00000002 /* Tx Fifo nearly empty */ -#define U8500_I2C_INT_TXFF 0x00000004 /* Tx Fifo Full */ -#define U8500_I2C_INT_TXFOVR 0x00000008 /* Tx Fifo over run */ -#define U8500_I2C_INT_RXFE 0x00000010 /* Rx Fifo Empty */ -#define U8500_I2C_INT_RXFNF 0x00000020 /* Rx Fifo nearly empty */ -#define U8500_I2C_INT_RXFF 0x00000040 /* Rx Fifo Full */ -#define U8500_I2C_INT_RFSR 0x00010000 /* Read From slave request */ -#define U8500_I2C_INT_RFSE 0x00020000 /* Read from slave empty */ -#define U8500_I2C_INT_WTSR 0x00040000 /* Write to Slave request */ -#define U8500_I2C_INT_MTD 0x00080000 /* Master Transcation Done*/ -#define U8500_I2C_INT_STD 0x00100000 /* Slave Transaction Done */ -#define U8500_I2C_INT_MAL 0x01000000 /* Master Arbitation Lost */ -#define U8500_I2C_INT_BERR 0x02000000 /* Bus Error */ -#define U8500_I2C_INT_MTDWS 0x10000000 /* Master Tran Done wo/ Stop */ - -/* Max clocks (Hz) */ -#define U8500_I2C_MAX_STANDARD_SCL 100000 -#define U8500_I2C_MAX_FAST_SCL 400000 -#define U8500_I2C_MAX_HIGH_SPEED_SCL 3400000 - -#endif /* _U8500_I2C_H_ */ diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index f29a169774..8b38a84de6 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -59,7 +59,7 @@ config CROS_EC_SPI provides a faster and more robust interface than I2C but the bugs are less interesting. -config CONFIG_FSL_SEC_MON +config FSL_SEC_MON bool "Enable FSL SEC_MON Driver" help Freescale Security Monitor block is responsible for monitoring diff --git a/drivers/misc/reset_sandbox.c b/drivers/misc/reset_sandbox.c index 917121bc5e..2691bb031a 100644 --- a/drivers/misc/reset_sandbox.c +++ b/drivers/misc/reset_sandbox.c @@ -40,7 +40,7 @@ static int sandbox_reset_request(struct udevice *dev, enum reset_t type) * (see the U_BOOT_DEVICE() declaration below) should not do anything. * If we are that device, return an error. */ - if (gd->fdt_blob && dev->of_offset == -1) + if (state->fdt_fname && dev->of_offset == -1) return -ENODEV; switch (type) { diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 1117fedefe..26d34ae5cc 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -10,6 +10,7 @@ #include <common.h> #include <errno.h> #include <malloc.h> +#include <memalign.h> #include <mmc.h> #include <dwmmc.h> #include <asm-generic/errno.h> @@ -213,7 +214,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, if (data) { start = get_timer(0); - timeout = 1000; + timeout = 240000; for (;;) { mask = dwmci_readl(host, DWMCI_RINTSTS); /* Error during data transfer. */ diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 371c1ec212..2a58702848 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -16,6 +16,7 @@ #include <mmc.h> #include <part.h> #include <malloc.h> +#include <memalign.h> #include <linux/list.h> #include <div64.h> #include "mmc_private.h" diff --git a/drivers/mmc/rpmb.c b/drivers/mmc/rpmb.c index 9d0b8bc0c8..1c6888fc48 100644 --- a/drivers/mmc/rpmb.c +++ b/drivers/mmc/rpmb.c @@ -10,6 +10,7 @@ #include <config.h> #include <common.h> +#include <memalign.h> #include <mmc.h> #include <u-boot/sha256.h> #include "mmc_private.h" diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 25f18adb67..e717c44216 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -120,17 +120,27 @@ static int mmc_set_mod_clk(struct sunxi_mmc_host *mmchost, unsigned int hz) /* determine delays */ if (hz <= 400000) { oclk_dly = 0; - sclk_dly = 7; + sclk_dly = 0; } else if (hz <= 25000000) { oclk_dly = 0; sclk_dly = 5; +#ifdef CONFIG_MACH_SUN9I } else if (hz <= 50000000) { - oclk_dly = 3; - sclk_dly = 5; + oclk_dly = 5; + sclk_dly = 4; } else { /* hz > 50000000 */ oclk_dly = 2; sclk_dly = 4; +#else + } else if (hz <= 50000000) { + oclk_dly = 3; + sclk_dly = 4; + } else { + /* hz > 50000000 */ + oclk_dly = 1; + sclk_dly = 4; +#endif } writel(CCM_MMC_CTRL_ENABLE | pll | CCM_MMC_CTRL_SCLK_DLY(sclk_dly) | diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 71c1a519e9..b4e5376176 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -60,7 +60,6 @@ obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o obj-$(CONFIG_NAND_MXC) += mxc_nand.o obj-$(CONFIG_NAND_MXS) += mxs_nand.o obj-$(CONFIG_NAND_NDFC) += ndfc.o -obj-$(CONFIG_NAND_NOMADIK) += nomadik.o obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o obj-$(CONFIG_NAND_SPEAR) += spr_nand.o diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 567eff0914..e0e9e1ebd0 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -390,6 +390,55 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, return 0; } +#ifndef CONFIG_SPL_BUILD +/* + * fsmc_nand_switch_ecc - switch the ECC operation between different engines + * + * @eccstrength - the number of bits that could be corrected + * (1 - HW, 4 - SW BCH4) + */ +int fsmc_nand_switch_ecc(uint32_t eccstrength) +{ + struct nand_chip *nand; + struct mtd_info *mtd; + int err; + + /* + * This functions is only called on SPEAr600 platforms, supporting + * 1 bit HW ECC. The BCH8 HW ECC (FSMC_VER8) from the ST-Ericsson + * Nomadik SoC is currently supporting this fsmc_nand_switch_ecc() + * function, as it doesn't need to switch to a different ECC layout. + */ + mtd = &nand_info[nand_curr_device]; + nand = mtd->priv; + + /* Setup the ecc configurations again */ + if (eccstrength == 1) { + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.bytes = 3; + nand->ecc.strength = 1; + nand->ecc.layout = &fsmc_ecc1_layout; + nand->ecc.calculate = fsmc_read_hwecc; + nand->ecc.correct = nand_correct_data; + } else if (eccstrength == 4) { + /* + * .calculate .correct and .bytes will be set in + * nand_scan_tail() + */ + nand->ecc.mode = NAND_ECC_SOFT_BCH; + nand->ecc.strength = 4; + nand->ecc.layout = NULL; + } else { + printf("Error: ECC strength %d not supported!\n", eccstrength); + } + + /* Update NAND handling after ECC mode switch */ + err = nand_scan_tail(mtd); + + return err; +} +#endif /* CONFIG_SPL_BUILD */ + int fsmc_nand_init(struct nand_chip *nand) { static int chip_nr; diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index 7a62cc3361..abcedc2102 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -16,7 +16,6 @@ #define JZ_NAND_CMD_ADDR (JZ_NAND_DATA_ADDR + 0x8000) #define JZ_NAND_ADDR_ADDR (JZ_NAND_DATA_ADDR + 0x10000) -#define BIT(x) (1 << (x)) #define JZ_NAND_ECC_CTRL_ENCODING BIT(3) #define JZ_NAND_ECC_CTRL_RS BIT(2) #define JZ_NAND_ECC_CTRL_RESET BIT(1) diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index 1d689015a5..f15cf36c88 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -149,6 +149,13 @@ static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size, uint32_t page_oob_size) { int ecc_strength; + int max_ecc_strength_supported; + + /* Refer to Chapter 17 for i.MX6DQ, Chapter 18 for i.MX6SX */ + if (is_cpu_type(MXC_CPU_MX6SX)) + max_ecc_strength_supported = 62; + else + max_ecc_strength_supported = 40; /* * Determine the ECC layout with the formula: @@ -162,7 +169,7 @@ static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size, / (galois_field * mxs_nand_ecc_chunk_cnt(page_data_size)); - return round_down(ecc_strength, 2); + return min(round_down(ecc_strength, 2), max_ecc_strength_supported); } static inline uint32_t mxs_nand_get_mark_offset(uint32_t page_data_size, diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index 21b4a618ce..71285b6669 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -23,6 +23,7 @@ #include <command.h> #include <watchdog.h> #include <malloc.h> +#include <memalign.h> #include <div64.h> #include <asm/errno.h> diff --git a/drivers/mtd/nand/nomadik.c b/drivers/mtd/nand/nomadik.c deleted file mode 100644 index a7cee5138d..0000000000 --- a/drivers/mtd/nand/nomadik.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * (C) Copyright 2007 STMicroelectronics, <www.st.com> - * (C) Copyright 2009 Alessandro Rubini <rubini@unipv.it> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> - -static inline int parity(int b) /* b is really a byte; returns 0 or ~0 */ -{ - __asm__ __volatile__( - "eor %0, %0, %0, lsr #4\n\t" - "eor %0, %0, %0, lsr #2\n\t" - "eor %0, %0, %0, lsr #1\n\t" - "ands %0, %0, #1\n\t" - "subne %0, %0, #2\t" - : "=r" (b) : "0" (b)); - return b; -} - -/* - * This is the ECC routine used in hardware, according to the manual. - * HW claims to make the calculation but not the correction; so we must - * recalculate the bytes for a comparison. - */ -static int ecc512(const unsigned char *data, unsigned char *ecc) -{ - int gpar = 0; - int i, val, par; - int pbits = 0; /* P8, P16, ... P2048 */ - int pprime = 0; /* P8', P16', ... P2048' */ - int lowbits; /* P1, P2, P4 and primes */ - - for (i = 0; i < 512; i++) { - par = parity((val = data[i])); - gpar ^= val; - pbits ^= (i & par); - } - /* - * Ok, now gpar is global parity (xor of all bytes) - * pbits are all the parity bits (non-prime ones) - */ - par = parity(gpar); - pprime = pbits ^ par; - /* Put low bits in the right position for ecc[2] (bits 7..2) */ - lowbits = 0 - | (parity(gpar & 0xf0) & 0x80) /* P4 */ - | (parity(gpar & 0x0f) & 0x40) /* P4' */ - | (parity(gpar & 0xcc) & 0x20) /* P2 */ - | (parity(gpar & 0x33) & 0x10) /* P2' */ - | (parity(gpar & 0xaa) & 0x08) /* P1 */ - | (parity(gpar & 0x55) & 0x04); /* P1' */ - - ecc[2] = ~(lowbits | ((pbits & 0x100) >> 7) | ((pprime & 0x100) >> 8)); - /* now intermix bits for ecc[1] (P1024..P128') and ecc[0] (P64..P8') */ - ecc[1] = ~( (pbits & 0x80) >> 0 | ((pprime & 0x80) >> 1) - | ((pbits & 0x40) >> 1) | ((pprime & 0x40) >> 2) - | ((pbits & 0x20) >> 2) | ((pprime & 0x20) >> 3) - | ((pbits & 0x10) >> 3) | ((pprime & 0x10) >> 4)); - - ecc[0] = ~( (pbits & 0x8) << 4 | ((pprime & 0x8) << 3) - | ((pbits & 0x4) << 3) | ((pprime & 0x4) << 2) - | ((pbits & 0x2) << 2) | ((pprime & 0x2) << 1) - | ((pbits & 0x1) << 1) | ((pprime & 0x1) << 0)); - return 0; -} - -/* This is the method in the chip->ecc field */ -static int nomadik_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat, - uint8_t *ecc_code) -{ - return ecc512(dat, ecc_code); -} - -static int nomadik_ecc_correct(struct mtd_info *mtd, uint8_t *dat, - uint8_t *r_ecc, uint8_t *c_ecc) -{ - struct nand_chip *chip = mtd->priv; - uint32_t r, c, d, diff; /*read, calculated, xor of them */ - - if (!memcmp(r_ecc, c_ecc, chip->ecc.bytes)) - return 0; - - /* Reorder the bytes into ascending-order 24 bits -- see manual */ - r = r_ecc[2] << 22 | r_ecc[1] << 14 | r_ecc[0] << 6 | r_ecc[2] >> 2; - c = c_ecc[2] << 22 | c_ecc[1] << 14 | c_ecc[0] << 6 | c_ecc[2] >> 2; - diff = (r ^ c) & ((1<<24)-1); /* use 24 bits only */ - - /* If 12 bits are different, one per pair, it's correctable */ - if (((diff | (diff>>1)) & 0x555555) == 0x555555) { - int bit = ((diff & 2) >> 1) - | ((diff & 0x8) >> 2) | ((diff & 0x20) >> 3); - int byte; - - d = diff >> 6; /* remove bit-order info */ - byte = ((d & 2) >> 1) - | ((d & 0x8) >> 2) | ((d & 0x20) >> 3) - | ((d & 0x80) >> 4) | ((d & 0x200) >> 5) - | ((d & 0x800) >> 6) | ((d & 0x2000) >> 7) - | ((d & 0x8000) >> 8) | ((d & 0x20000) >> 9); - /* correct the single bit */ - dat[byte] ^= 1<<bit; - return 0; - } - /* If 1 bit only differs, it's one bit error in ECC, ignore */ - if ((diff ^ (1 << (ffs(diff) - 1))) == 0) - return 0; - /* Otherwise, uncorrectable */ - return -1; -} - -static void nomadik_ecc_hwctl(struct mtd_info *mtd, int mode) -{ /* mandatory in the structure but not used here */ } - - -/* This is the layout used by older installations, we keep compatible */ -struct nand_ecclayout nomadik_ecc_layout = { - .eccbytes = 3 * 4, - .eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */ - 0x02, 0x03, 0x04, - 0x12, 0x13, 0x14, - 0x22, 0x23, 0x24, - 0x32, 0x33, 0x34}, - .oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} }, -}; - -#define MASK_ALE (1 << 24) /* our ALE is AD21 */ -#define MASK_CLE (1 << 23) /* our CLE is AD22 */ - -/* This is copied from the AT91SAM9 devices (Stelian Pop, Lead Tech Design) */ -static void nomadik_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - u32 pcr0 = readl(REG_FSMC_PCR0); - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - if (ctrl & NAND_NCE) - writel(pcr0 | 0x4, REG_FSMC_PCR0); - else - writel(pcr0 & ~0x4, REG_FSMC_PCR0); - - this->IO_ADDR_W = (void *) IO_ADDR_W; - this->IO_ADDR_R = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -/* Returns 1 when ready; upper layers timeout at 20ms with timer routines */ -static int nomadik_nand_ready(struct mtd_info *mtd) -{ - return 1; /* The ready bit is handled in hardware */ -} - -/* Copy a buffer 32bits at a time: faster than defualt method which is 8bit */ -static void nomadik_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - u32 *p = (u32 *) buf; - - len >>= 2; - writel(0, REG_FSMC_ECCR0); - for (i = 0; i < len; i++) - p[i] = readl(chip->IO_ADDR_R); -} - -int board_nand_init(struct nand_chip *chip) -{ - /* Set up the FSMC_PCR0 for nand access*/ - writel(0x0000004a, REG_FSMC_PCR0); - /* Set up FSMC_PMEM0, FSMC_PATT0 with timing data for access */ - writel(0x00020401, REG_FSMC_PMEM0); - writel(0x00020404, REG_FSMC_PATT0); - - chip->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING; - chip->cmd_ctrl = nomadik_nand_hwcontrol; - chip->dev_ready = nomadik_nand_ready; - /* The chip allows 32bit reads, so avoid the default 8bit copy */ - chip->read_buf = nomadik_nand_read_buf; - - /* ECC: follow the hardware-defined rulse, but do it in sw */ - chip->ecc.mode = NAND_ECC_HW; - chip->ecc.bytes = 3; - chip->ecc.size = 512; - chip->ecc.strength = 1; - chip->ecc.layout = &nomadik_ecc_layout; - chip->ecc.calculate = nomadik_ecc_calculate; - chip->ecc.hwctl = nomadik_ecc_hwctl; - chip->ecc.correct = nomadik_ecc_correct; - - return 0; -} diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 4372988ed2..4814fa202a 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -558,10 +558,10 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat, bit_pos = error_loc[count] % 8; if (byte_pos < SECTOR_BYTES) { dat[byte_pos] ^= 1 << bit_pos; - printf("nand: bit-flip corrected @data=%d\n", byte_pos); + debug("nand: bit-flip corrected @data=%d\n", byte_pos); } else if (byte_pos < error_max) { read_ecc[byte_pos - SECTOR_BYTES] ^= 1 << bit_pos; - printf("nand: bit-flip corrected @oob=%d\n", byte_pos - + debug("nand: bit-flip corrected @oob=%d\n", byte_pos - SECTOR_BYTES); } else { err = -EBADMSG; @@ -663,7 +663,7 @@ static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data, /* correct data only, not ecc bytes */ if (errloc[i] < 8*512) data[errloc[i]/8] ^= 1 << (errloc[i] & 7); - printf("corrected bitflip %u\n", errloc[i]); + debug("corrected bitflip %u\n", errloc[i]); #ifdef DEBUG puts("read_ecc: "); /* diff --git a/drivers/mtd/nand/sunxi_nand_spl.c b/drivers/mtd/nand/sunxi_nand_spl.c index bf9b1b1450..b0e07aa2d0 100644 --- a/drivers/mtd/nand/sunxi_nand_spl.c +++ b/drivers/mtd/nand/sunxi_nand_spl.c @@ -321,6 +321,7 @@ static int nand_read_buffer(uint32_t offs, unsigned int size, void *dest, { 8192, 40, 1024, 5 }, { 16384, 56, 1024, 5 }, { 8192, 24, 1024, 5 }, + { 4096, 24, 1024, 5 }, }; static int nand_config = -1; int i; @@ -355,18 +356,32 @@ static int nand_read_buffer(uint32_t offs, unsigned int size, void *dest, int nand_spl_load_image(uint32_t offs, unsigned int size, void *dest) { +#if CONFIG_SYS_NAND_U_BOOT_OFFS == CONFIG_SPL_PAD_TO + /* + * u-boot-dtb.bin appended to SPL, use syndrome (like the BROM does) + * and try different erase block sizes to find the backup. + */ const uint32_t boot_offsets[] = { 0 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS, 1 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS, 2 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS, 4 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS, }; - int i, syndrome; - - if (CONFIG_SYS_NAND_U_BOOT_OFFS == CONFIG_SPL_PAD_TO) - syndrome = 1; /* u-boot-dtb.bin appended to SPL */ - else - syndrome = 0; /* u-boot-dtb.bin on its own partition */ + const int syndrome = 1; +#else + /* + * u-boot-dtb.bin on its own partition, do not use syndrome, u-boot + * partition sits after 2 eraseblocks (spl, spl-backup), look for + * backup u-boot 1 erase block further. + */ + const uint32_t eraseblock_size = CONFIG_SYS_NAND_U_BOOT_OFFS / 2; + const uint32_t boot_offsets[] = { + CONFIG_SYS_NAND_U_BOOT_OFFS, + CONFIG_SYS_NAND_U_BOOT_OFFS + eraseblock_size, + }; + const int syndrome = 0; +#endif + int i; if (offs == CONFIG_SYS_NAND_U_BOOT_OFFS) { for (i = 0; i < ARRAY_SIZE(boot_offsets); i++) { diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/tegra_nand.c index debad4f791..a77db7b65d 100644 --- a/drivers/mtd/nand/tegra_nand.c +++ b/drivers/mtd/nand/tegra_nand.c @@ -9,6 +9,7 @@ #include <common.h> #include <asm/io.h> +#include <memalign.h> #include <nand.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index 4a4a3afc92..8f5bdda3d7 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -23,6 +23,7 @@ const struct spi_flash_params spi_flash_params_table[] = { {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K}, {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K}, {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K}, + {"AT26DF081A", 0x1f4501, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K}, #endif #ifdef CONFIG_SPI_FLASH_EON /* EON */ {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, RD_NORM, 0}, diff --git a/drivers/net/designware.c b/drivers/net/designware.c index ae78d21db6..6433896eec 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -14,6 +14,7 @@ #include <errno.h> #include <miiphy.h> #include <malloc.h> +#include <pci.h> #include <linux/compiler.h> #include <linux/err.h> #include <asm/io.h> @@ -558,6 +559,22 @@ static int designware_eth_write_hwaddr(struct udevice *dev) return _dw_write_hwaddr(priv, pdata->enetaddr); } +static int designware_eth_bind(struct udevice *dev) +{ +#ifdef CONFIG_DM_PCI + static int num_cards; + char name[20]; + + /* Create a unique device name for PCI type devices */ + if (device_is_on_pci_bus(dev)) { + sprintf(name, "eth_designware#%u", num_cards++); + device_set_name(dev, name); + } +#endif + + return 0; +} + static int designware_eth_probe(struct udevice *dev) { struct eth_pdata *pdata = dev_get_platdata(dev); @@ -565,6 +582,23 @@ static int designware_eth_probe(struct udevice *dev) u32 iobase = pdata->iobase; int ret; +#ifdef CONFIG_DM_PCI + /* + * If we are on PCI bus, either directly attached to a PCI root port, + * or via a PCI bridge, fill in platdata before we probe the hardware. + */ + if (device_is_on_pci_bus(dev)) { + pci_dev_t bdf = pci_get_bdf(dev); + + dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0, &iobase); + iobase &= PCI_BASE_ADDRESS_MEM_MASK; + iobase = pci_mem_to_phys(bdf, iobase); + + pdata->iobase = iobase; + pdata->phy_interface = PHY_INTERFACE_MODE_RMII; + } +#endif + debug("%s, iobase=%x, priv=%p\n", __func__, iobase, priv); priv->mac_regs_p = (struct eth_mac_regs *)iobase; priv->dma_regs_p = (struct eth_dma_regs *)(iobase + DW_DMA_BASE_OFFSET); @@ -617,10 +651,18 @@ U_BOOT_DRIVER(eth_designware) = { .id = UCLASS_ETH, .of_match = designware_eth_ids, .ofdata_to_platdata = designware_eth_ofdata_to_platdata, + .bind = designware_eth_bind, .probe = designware_eth_probe, .ops = &designware_eth_ops, .priv_auto_alloc_size = sizeof(struct dw_eth_dev), .platdata_auto_alloc_size = sizeof(struct eth_pdata), .flags = DM_FLAG_ALLOC_PRIV_DMA, }; + +static struct pci_device_id supported[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_EMAC) }, + { } +}; + +U_BOOT_PCI_DEVICE(eth_designware, supported); #endif diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 7b830ff8c0..2ba03ed73e 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -32,6 +32,7 @@ tested on both gig copper and gig fiber boards #include <common.h> #include <dm.h> #include <errno.h> +#include <memalign.h> #include <pci.h> #include "e1000.h" diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index bff5fd1119..79f6737e8e 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -10,6 +10,7 @@ #include <common.h> #include <malloc.h> +#include <memalign.h> #include <net.h> #include <netdev.h> #include <miiphy.h> diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 31042a6b6b..bf972dc39b 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -170,7 +170,11 @@ int nc_input_packet(uchar *pkt, struct in_addr src_ip, unsigned dest_port, static void nc_send_packet(const char *buf, int len) { +#ifdef CONFIG_DM_ETH + struct udevice *eth; +#else struct eth_device *eth; +#endif int inited = 0; uchar *pkt; uchar *ether; @@ -183,7 +187,7 @@ static void nc_send_packet(const char *buf, int len) return; if (!memcmp(nc_ether, net_null_ethaddr, 6)) { - if (eth->state == ETH_STATE_ACTIVE) + if (eth_is_active(eth)) return; /* inside net loop */ output_packet = buf; output_packet_len = len; @@ -194,7 +198,7 @@ static void nc_send_packet(const char *buf, int len) return; } - if (eth->state != ETH_STATE_ACTIVE) { + if (!eth_is_active(eth)) { if (eth_is_on_demand_init()) { if (eth_init() < 0) return; @@ -292,7 +296,11 @@ static int nc_stdio_getc(struct stdio_dev *dev) static int nc_stdio_tstc(struct stdio_dev *dev) { +#ifdef CONFIG_DM_ETH + struct udevice *eth; +#else struct eth_device *eth; +#endif if (input_recursion) return 0; @@ -301,7 +309,7 @@ static int nc_stdio_tstc(struct stdio_dev *dev) return 1; eth = eth_get_dev(); - if (eth && eth->state == ETH_STATE_ACTIVE) + if (eth_is_active(eth)) return 0; /* inside net loop */ input_recursion = 1; diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 65c731afb6..a6023f1033 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -571,7 +571,7 @@ static struct phy_device *phy_device_create(struct mii_dev *bus, int addr, memset(dev, 0, sizeof(*dev)); dev->duplex = -1; - dev->link = 1; + dev->link = 0; dev->interface = interface; dev->autoneg = AUTONEG_ENABLE; diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c index 7b6e20f30f..ebd46b27e5 100644 --- a/drivers/net/rtl8169.c +++ b/drivers/net/rtl8169.c @@ -44,6 +44,7 @@ #include <dm.h> #include <errno.h> #include <malloc.h> +#include <memalign.h> #include <net.h> #ifndef CONFIG_DM_ETH #include <netdev.h> diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c index ade14cd475..f31216ffa6 100644 --- a/drivers/net/smc91111.c +++ b/drivers/net/smc91111.c @@ -499,15 +499,8 @@ again: } /* we have a packet address, so tell the card to use it */ -#ifndef CONFIG_XAENIAX SMC_outb (dev, packet_no, PN_REG); -#else - /* On Xaeniax board, we can't use SMC_outb here because that way - * the Allocate MMU command will end up written to the command register - * as well, which will lead to a problem. - */ - SMC_outl (dev, packet_no << 16, 0); -#endif + /* do not write new ptr value if Write data fifo not empty */ while ( saved_ptr & PTR_NOTEMPTY ) printf ("Write data fifo not empty!\n"); @@ -542,39 +535,19 @@ again: */ #ifdef USE_32_BIT SMC_outsl (dev, SMC91111_DATA_REG, buf, length >> 2); -#ifndef CONFIG_XAENIAX if (length & 0x2) SMC_outw (dev, *((word *) (buf + (length & 0xFFFFFFFC))), SMC91111_DATA_REG); #else - /* On XANEIAX, we can only use 32-bit writes, so we need to handle - * unaligned tail part specially. The standard code doesn't work. - */ - if ((length & 3) == 3) { - u16 * ptr = (u16*) &buf[length-3]; - SMC_outl(dev, (*ptr) | ((0x2000 | buf[length-1]) << 16), - SMC91111_DATA_REG); - } else if ((length & 2) == 2) { - u16 * ptr = (u16*) &buf[length-2]; - SMC_outl(dev, *ptr, SMC91111_DATA_REG); - } else if (length & 1) { - SMC_outl(dev, (0x2000 | buf[length-1]), SMC91111_DATA_REG); - } else { - SMC_outl(dev, 0, SMC91111_DATA_REG); - } -#endif -#else SMC_outsw (dev, SMC91111_DATA_REG, buf, (length) >> 1); #endif /* USE_32_BIT */ -#ifndef CONFIG_XAENIAX /* Send the last byte, if there is one. */ if ((length & 1) == 0) { SMC_outw (dev, 0, SMC91111_DATA_REG); } else { SMC_outw (dev, buf[length - 1] | 0x2000, SMC91111_DATA_REG); } -#endif /* and let the chipset deal with it */ SMC_outw (dev, MC_ENQUEUE, MMU_CMD_REG); @@ -588,9 +561,6 @@ again: /* release packet */ /* no need to release, MMU does that now */ -#ifdef CONFIG_XAENIAX - SMC_outw (dev, MC_FREEPKT, MMU_CMD_REG); -#endif /* wait for MMU getting ready (low) */ while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) { @@ -610,9 +580,6 @@ again: /* release packet */ /* no need to release, MMU does that now */ -#ifdef CONFIG_XAENIAX - SMC_outw (dev, MC_FREEPKT, MMU_CMD_REG); -#endif /* wait for MMU getting ready (low) */ while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) { @@ -625,15 +592,7 @@ again: } /* restore previously saved registers */ -#ifndef CONFIG_XAENIAX SMC_outb( dev, saved_pnr, PN_REG ); -#else - /* On Xaeniax board, we can't use SMC_outb here because that way - * the Allocate MMU command will end up written to the command register - * as well, which will lead to a problem. - */ - SMC_outl(dev, saved_pnr << 16, 0); -#endif SMC_outw( dev, saved_ptr, PTR_REG ); return length; @@ -802,15 +761,7 @@ static int smc_rcv(struct eth_device *dev) udelay(1); /* Wait until not busy */ /* restore saved registers */ -#ifndef CONFIG_XAENIAX SMC_outb( dev, saved_pnr, PN_REG ); -#else - /* On Xaeniax board, we can't use SMC_outb here because that way - * the Allocate MMU command will end up written to the command register - * as well, which will lead to a problem. - */ - SMC_outl( dev, saved_pnr << 16, 0); -#endif SMC_outw( dev, saved_ptr, PTR_REG ); if (!is_error) { diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h index e19c491cbc..5197f36039 100644 --- a/drivers/net/smc91111.h +++ b/drivers/net/smc91111.h @@ -77,19 +77,6 @@ struct smc91111_priv{ if (__p & 2) __v >>= 8; \ else __v &= 0xff; \ __v; }) -#elif defined(CONFIG_XAENIAX) -#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r)))) -#define SMC_inw(a,z) ({ \ - unsigned int __p = (unsigned int)((a)->iobase + (z)); \ - unsigned int __v = *(volatile unsigned int *)((__p) & ~3); \ - if (__p & 3) __v >>= 16; \ - else __v &= 0xffff; \ - __v; }) -#define SMC_inb(a,p) ({ \ - unsigned int ___v = SMC_inw((a),(p) & ~1); \ - if ((p) & 1) ___v >>= 8; \ - else ___v &= 0xff; \ - ___v; }) #else #define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r)))) #define SMC_inw(a,r) (*((volatile word *)((a)->iobase+(r)))) @@ -104,15 +91,6 @@ struct smc91111_priv{ #ifdef CONFIG_XSENGINE #define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d) #define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r<<1))) = d) -#elif defined (CONFIG_XAENIAX) -#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d) -#define SMC_outw(a,d,p) ({ \ - dword __dwo = SMC_inl((a),(p) & ~3); \ - dword __dwn = (word)(d); \ - __dwo &= ((p) & 3) ? 0x0000ffff : 0xffff0000; \ - __dwo |= ((p) & 3) ? __dwn << 16 : __dwn; \ - SMC_outl((a), __dwo, (p) & ~3); \ -}) #else #define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d) #define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d) diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c index fed7358448..7595db1acb 100644 --- a/drivers/net/vsc9953.c +++ b/drivers/net/vsc9953.c @@ -1,5 +1,5 @@ /* - * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2014 - 2015 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ * @@ -10,7 +10,11 @@ #include <asm/fsl_serdes.h> #include <fm_eth.h> #include <fsl_memac.h> +#include <bitfield.h> +#include <errno.h> +#include <malloc.h> #include <vsc9953.h> +#include <ethsw.h> static struct vsc9953_info vsc9953_l2sw = { .port[0] = VSC9953_PORT_INFO_INITIALIZER(0), @@ -25,50 +29,50 @@ static struct vsc9953_info vsc9953_l2sw = { .port[9] = VSC9953_PORT_INFO_INITIALIZER(9), }; -void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus) +void vsc9953_port_info_set_mdio(int port_no, struct mii_dev *bus) { - if (!VSC9953_PORT_CHECK(port)) + if (!VSC9953_PORT_CHECK(port_no)) return; - vsc9953_l2sw.port[port].bus = bus; + vsc9953_l2sw.port[port_no].bus = bus; } -void vsc9953_port_info_set_phy_address(int port, int address) +void vsc9953_port_info_set_phy_address(int port_no, int address) { - if (!VSC9953_PORT_CHECK(port)) + if (!VSC9953_PORT_CHECK(port_no)) return; - vsc9953_l2sw.port[port].phyaddr = address; + vsc9953_l2sw.port[port_no].phyaddr = address; } -void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int) +void vsc9953_port_info_set_phy_int(int port_no, phy_interface_t phy_int) { - if (!VSC9953_PORT_CHECK(port)) + if (!VSC9953_PORT_CHECK(port_no)) return; - vsc9953_l2sw.port[port].enet_if = phy_int; + vsc9953_l2sw.port[port_no].enet_if = phy_int; } -void vsc9953_port_enable(int port) +void vsc9953_port_enable(int port_no) { - if (!VSC9953_PORT_CHECK(port)) + if (!VSC9953_PORT_CHECK(port_no)) return; - vsc9953_l2sw.port[port].enabled = 1; + vsc9953_l2sw.port[port_no].enabled = 1; } -void vsc9953_port_disable(int port) +void vsc9953_port_disable(int port_no) { - if (!VSC9953_PORT_CHECK(port)) + if (!VSC9953_PORT_CHECK(port_no)) return; - vsc9953_l2sw.port[port].enabled = 0; + vsc9953_l2sw.port[port_no].enabled = 0; } static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr, int regnum, int value) { - int timeout = 50000; + int timeout = 50000; out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | @@ -85,8 +89,8 @@ static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr, static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr, int regnum) { - int value = 0xFFFF; - int timeout = 50000; + int value = 0xFFFF; + int timeout = 50000; while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout) udelay(1); @@ -120,8 +124,8 @@ static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr, static int init_phy(struct eth_device *dev) { - struct vsc9953_port_info *l2sw_port = dev->priv; - struct phy_device *phydev = NULL; + struct vsc9953_port_info *l2sw_port = dev->priv; + struct phy_device *phydev = NULL; #ifdef CONFIG_PHYLIB if (!l2sw_port->bus) @@ -148,21 +152,21 @@ static int init_phy(struct eth_device *dev) return 0; } -static int vsc9953_port_init(int port) +static int vsc9953_port_init(int port_no) { - struct eth_device *dev; + struct eth_device *dev; /* Internal ports never have a PHY */ - if (VSC9953_INTERNAL_PORT_CHECK(port)) + if (VSC9953_INTERNAL_PORT_CHECK(port_no)) return 0; /* alloc eth device */ dev = (struct eth_device *)calloc(1, sizeof(struct eth_device)); if (!dev) - return 1; + return -ENOMEM; - sprintf(dev->name, "SW@PORT%d", port); - dev->priv = &vsc9953_l2sw.port[port]; + sprintf(dev->name, "SW@PORT%d", port_no); + dev->priv = &vsc9953_l2sw.port[port_no]; dev->init = NULL; dev->halt = NULL; dev->send = NULL; @@ -170,225 +174,485 @@ static int vsc9953_port_init(int port) if (init_phy(dev)) { free(dev); - return 1; + return -ENODEV; } return 0; } -void vsc9953_init(bd_t *bis) +static int vsc9953_vlan_table_poll_idle(void) { - u32 i, hdx_cfg = 0, phy_addr = 0; - int timeout; - struct vsc9953_system_reg *l2sys_reg; - struct vsc9953_qsys_reg *l2qsys_reg; - struct vsc9953_dev_gmii *l2dev_gmii_reg; - struct vsc9953_analyzer *l2ana_reg; - struct vsc9953_devcpu_gcb *l2dev_gcb; + struct vsc9953_analyzer *l2ana_reg; + int timeout; - l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET + - VSC9953_DEV_GMII_OFFSET); + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + timeout = 50000; + while (((in_le32(&l2ana_reg->ana_tables.vlan_access) & + VSC9953_VLAN_CMD_MASK) != VSC9953_VLAN_CMD_IDLE) && --timeout) + udelay(1); + + return timeout ? 0 : -EBUSY; +} + +#ifdef CONFIG_CMD_ETHSW +/* Add/remove a port to/from a VLAN */ +static void vsc9953_vlan_table_membership_set(int vid, u32 port_no, u8 add) +{ + u32 val; + struct vsc9953_analyzer *l2ana_reg; l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + VSC9953_ANA_OFFSET); - l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + - VSC9953_SYS_OFFSET); + if (vsc9953_vlan_table_poll_idle() < 0) { + debug("VLAN table timeout\n"); + return; + } - l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + - VSC9953_QSYS_OFFSET); + val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); + val = bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid); + out_le32(&l2ana_reg->ana_tables.vlan_tidx, val); - l2dev_gcb = (struct vsc9953_devcpu_gcb *)(VSC9953_OFFSET + - VSC9953_DEVCPU_GCB); + clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, + VSC9953_VLAN_CMD_MASK, VSC9953_VLAN_CMD_READ); - out_le32(&l2dev_gcb->chip_regs.soft_rst, - CONFIG_VSC9953_SOFT_SWC_RST_ENA); - timeout = 50000; - while ((in_le32(&l2dev_gcb->chip_regs.soft_rst) & - CONFIG_VSC9953_SOFT_SWC_RST_ENA) && --timeout) - udelay(1); /* busy wait for vsc9953 soft reset */ - if (timeout == 0) - debug("Timeout waiting for VSC9953 to reset\n"); + if (vsc9953_vlan_table_poll_idle() < 0) { + debug("VLAN table timeout\n"); + return; + } - out_le32(&l2sys_reg->sys.reset_cfg, CONFIG_VSC9953_MEM_ENABLE | - CONFIG_VSC9953_MEM_INIT); + val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); + val = bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid); + out_le32(&l2ana_reg->ana_tables.vlan_tidx, val); + + val = in_le32(&l2ana_reg->ana_tables.vlan_access); + if (!add) { + val = bitfield_replace_by_mask(val, VSC9953_VLAN_CMD_MASK, + VSC9953_VLAN_CMD_WRITE) & + ~(bitfield_replace_by_mask(0, VSC9953_VLAN_PORT_MASK, + (1 << port_no))); + ; + } else { + val = bitfield_replace_by_mask(val, VSC9953_VLAN_CMD_MASK, + VSC9953_VLAN_CMD_WRITE) | + bitfield_replace_by_mask(0, VSC9953_VLAN_PORT_MASK, + (1 << port_no)); + } + out_le32(&l2ana_reg->ana_tables.vlan_access, val); - timeout = 50000; - while ((in_le32(&l2sys_reg->sys.reset_cfg) & - CONFIG_VSC9953_MEM_INIT) && --timeout) - udelay(1); /* busy wait for vsc9953 memory init */ - if (timeout == 0) - debug("Timeout waiting for VSC9953 memory to initialize\n"); + /* wait for VLAN table command to flush */ + if (vsc9953_vlan_table_poll_idle() < 0) { + debug("VLAN table timeout\n"); + return; + } +} - out_le32(&l2sys_reg->sys.reset_cfg, (in_le32(&l2sys_reg->sys.reset_cfg) - | CONFIG_VSC9953_CORE_ENABLE)); +/* show VLAN membership for a port */ +static void vsc9953_vlan_membership_show(int port_no) +{ + u32 val; + struct vsc9953_analyzer *l2ana_reg; + u32 vid; - /* VSC9953 Setting to be done once only */ - out_le32(&l2qsys_reg->sys.ext_cpu_cfg, 0x00000b00); + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - if (vsc9953_port_init(i)) - printf("Failed to initialize l2switch port %d\n", i); + printf("Port %d VLAN membership: ", port_no); - /* Enable VSC9953 GMII Ports Port ID 0 - 7 */ - if (VSC9953_INTERNAL_PORT_CHECK(i)) { - out_le32(&l2ana_reg->pfc[i].pfc_cfg, - CONFIG_VSC9953_PFC_FC_QSGMII); - out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], - CONFIG_VSC9953_MAC_FC_CFG_QSGMII); - } else { - out_le32(&l2ana_reg->pfc[i].pfc_cfg, - CONFIG_VSC9953_PFC_FC); - out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], - CONFIG_VSC9953_MAC_FC_CFG); + for (vid = 0; vid < VSC9953_MAX_VLAN; vid++) { + if (vsc9953_vlan_table_poll_idle() < 0) { + debug("VLAN table timeout\n"); + return; } - out_le32(&l2dev_gmii_reg->port_mode.clock_cfg, - CONFIG_VSC9953_CLOCK_CFG); - out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg, - CONFIG_VSC9953_MAC_ENA_CFG); - out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_mode_cfg, - CONFIG_VSC9953_MAC_MODE_CFG); - out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ifg_cfg, - CONFIG_VSC9953_MAC_IFG_CFG); - /* mac_hdx_cfg varies with port id*/ - hdx_cfg = (CONFIG_VSC9953_MAC_HDX_CFG | (i << 16)); - out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_hdx_cfg, hdx_cfg); - out_le32(&l2sys_reg->sys.front_port_mode[i], - CONFIG_VSC9953_FRONT_PORT_MODE); - out_le32(&l2qsys_reg->sys.switch_port_mode[i], - CONFIG_VSC9953_PORT_ENA); - out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_maxlen_cfg, - CONFIG_VSC9953_MAC_MAX_LEN); - out_le32(&l2sys_reg->pause_cfg.pause_cfg[i], - CONFIG_VSC9953_PAUSE_CFG); - /* WAIT FOR 2 us*/ - udelay(2); - l2dev_gmii_reg = (struct vsc9953_dev_gmii *)( - (char *)l2dev_gmii_reg - + T1040_SWITCH_GMII_DEV_OFFSET); + val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); + val = bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, + vid); + out_le32(&l2ana_reg->ana_tables.vlan_tidx, val); - /* Initialize Lynx PHY Wrappers */ - phy_addr = 0; - if (vsc9953_l2sw.port[i].enet_if == - PHY_INTERFACE_MODE_QSGMII) - phy_addr = (i + 0x4) & 0x1F; - else if (vsc9953_l2sw.port[i].enet_if == - PHY_INTERFACE_MODE_SGMII) - phy_addr = (i + 1) & 0x1F; - - if (phy_addr) { - /* SGMII IF mode + AN enable */ - vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, - 0x14, PHY_SGMII_IF_MODE_AN | - PHY_SGMII_IF_MODE_SGMII); - /* Dev ability according to SGMII specification */ - vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, - 0x4, PHY_SGMII_DEV_ABILITY_SGMII); - /* Adjust link timer for SGMII - * 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 - */ - vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, - 0x13, 0x0003); - vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, - 0x12, 0x0d40); - /* Restart AN */ - vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, - 0x0, PHY_SGMII_CR_DEF_VAL | - PHY_SGMII_CR_RESET_AN); + clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, + VSC9953_VLAN_CMD_MASK, VSC9953_VLAN_CMD_READ); - timeout = 50000; - while ((vsc9953_mdio_read(&l2dev_gcb->mii_mng[0], - phy_addr, 0x01) & 0x0020) && --timeout) - udelay(1); /* wait for AN to complete */ - if (timeout == 0) - debug("Timeout waiting for AN to complete\n"); + if (vsc9953_vlan_table_poll_idle() < 0) { + debug("VLAN table timeout\n"); + return; } + + val = in_le32(&l2ana_reg->ana_tables.vlan_access); + + if (bitfield_extract_by_mask(val, VSC9953_VLAN_PORT_MASK) & + (1 << port_no)) + printf("%d ", vid); } + printf("\n"); +} +#endif - printf("VSC9953 L2 switch initialized\n"); - return; +/* vlan table set/clear all membership of vid */ +static void vsc9953_vlan_table_membership_all_set(int vid, int set_member) +{ + uint val; + struct vsc9953_analyzer *l2ana_reg; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + if (vsc9953_vlan_table_poll_idle() < 0) { + debug("VLAN table timeout\n"); + return; + } + + /* read current vlan configuration */ + val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); + out_le32(&l2ana_reg->ana_tables.vlan_tidx, + bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid)); + + clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, + VSC9953_VLAN_CMD_MASK, VSC9953_VLAN_CMD_READ); + + if (vsc9953_vlan_table_poll_idle() < 0) { + debug("VLAN table timeout\n"); + return; + } + + val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); + out_le32(&l2ana_reg->ana_tables.vlan_tidx, + bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid)); + + clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, + VSC9953_VLAN_PORT_MASK | VSC9953_VLAN_CMD_MASK, + VSC9953_VLAN_CMD_WRITE | + (set_member ? VSC9953_VLAN_PORT_MASK : 0)); } -#ifdef CONFIG_VSC9953_CMD -/* Enable/disable status of a VSC9953 port */ -static void vsc9953_port_status_set(int port_nr, u8 enabled) +#ifdef CONFIG_CMD_ETHSW +/* Get PVID of a VSC9953 port */ +static int vsc9953_port_vlan_pvid_get(int port_nr, int *pvid) { - u32 val; - struct vsc9953_qsys_reg *l2qsys_reg; + u32 val; + struct vsc9953_analyzer *l2ana_reg; /* Administrative down */ - if (vsc9953_l2sw.port[port_nr].enabled == 0) + if (vsc9953_l2sw.port[port_nr].enabled) { + printf("Port %d is administrative down\n", port_nr); + return -1; + } + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + /* Get ingress PVID */ + val = in_le32(&l2ana_reg->port[port_nr].vlan_cfg); + *pvid = bitfield_extract_by_mask(val, VSC9953_VLAN_CFG_VID_MASK); + + return 0; +} +#endif + +/* Set PVID for a VSC9953 port */ +static void vsc9953_port_vlan_pvid_set(int port_no, int pvid) +{ + uint val; + struct vsc9953_analyzer *l2ana_reg; + struct vsc9953_rew_reg *l2rew_reg; + + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) { + printf("Port %d is administrative down\n", port_no); return; + } - l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + - VSC9953_QSYS_OFFSET); + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + + VSC9953_REW_OFFSET); + + /* Set PVID on ingress */ + val = in_le32(&l2ana_reg->port[port_no].vlan_cfg); + val = bitfield_replace_by_mask(val, VSC9953_VLAN_CFG_VID_MASK, pvid); + out_le32(&l2ana_reg->port[port_no].vlan_cfg, val); + + /* Set PVID on egress */ + val = in_le32(&l2rew_reg->port[port_no].port_vlan_cfg); + val = bitfield_replace_by_mask(val, VSC9953_PORT_VLAN_CFG_VID_MASK, + pvid); + out_le32(&l2rew_reg->port[port_no].port_vlan_cfg, val); +} + +static void vsc9953_port_all_vlan_pvid_set(int pvid) +{ + int i; + + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_vlan_pvid_set(i, pvid); +} + +/* Enable/disable vlan aware of a VSC9953 port */ +static void vsc9953_port_vlan_aware_set(int port_no, int enabled) +{ + struct vsc9953_analyzer *l2ana_reg; - val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_nr]); - if (enabled == 1) - val |= (1 << 13); + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) { + printf("Port %d is administrative down\n", port_no); + return; + } + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + if (enabled) + setbits_le32(&l2ana_reg->port[port_no].vlan_cfg, + VSC9953_VLAN_CFG_AWARE_ENA); else - val &= ~(1 << 13); + clrbits_le32(&l2ana_reg->port[port_no].vlan_cfg, + VSC9953_VLAN_CFG_AWARE_ENA); +} + +/* Set all VSC9953 ports' vlan aware */ +static void vsc9953_port_all_vlan_aware_set(int enabled) +{ + int i; - out_le32(&l2qsys_reg->sys.switch_port_mode[port_nr], val); + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_vlan_aware_set(i, enabled); } -/* Set all VSC9953 ports' status */ -static void vsc9953_port_all_status_set(u8 enabled) +/* Enable/disable vlan pop count of a VSC9953 port */ +static void vsc9953_port_vlan_popcnt_set(int port_no, int popcnt) { - int i; + uint val; + struct vsc9953_analyzer *l2ana_reg; + + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) { + printf("Port %d is administrative down\n", port_no); + return; + } + + if (popcnt > 3 || popcnt < 0) { + printf("Invalid pop count value: %d\n", port_no); + return; + } + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + val = in_le32(&l2ana_reg->port[port_no].vlan_cfg); + val = bitfield_replace_by_mask(val, VSC9953_VLAN_CFG_POP_CNT_MASK, + popcnt); + out_le32(&l2ana_reg->port[port_no].vlan_cfg, val); +} + +/* Set all VSC9953 ports' pop count */ +static void vsc9953_port_all_vlan_poncnt_set(int popcnt) +{ + int i; for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_status_set(i, enabled); + vsc9953_port_vlan_popcnt_set(i, popcnt); } -/* Start autonegotiation for a VSC9953 PHY */ -static void vsc9953_phy_autoneg(int port_nr) +/* Enable/disable learning for frames dropped due to ingress filtering */ +static void vsc9953_vlan_ingr_fltr_learn_drop(int enable) +{ + struct vsc9953_analyzer *l2ana_reg; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + if (enable) + setbits_le32(&l2ana_reg->ana.adv_learn, VSC9953_VLAN_CHK); + else + clrbits_le32(&l2ana_reg->ana.adv_learn, VSC9953_VLAN_CHK); +} + +/* Egress untag modes of a VSC9953 port */ +enum egress_untag_mode { + EGRESS_UNTAG_ALL = 0, + EGRESS_UNTAG_PVID_AND_ZERO, + EGRESS_UNTAG_ZERO, + EGRESS_UNTAG_NONE, +}; + +#ifdef CONFIG_CMD_ETHSW +/* Get egress tagging configuration for a VSC9953 port */ +static int vsc9953_port_vlan_egr_untag_get(int port_no, + enum egress_untag_mode *mode) { - if (!vsc9953_l2sw.port[port_nr].phydev) + u32 val; + struct vsc9953_rew_reg *l2rew_reg; + + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) { + printf("Port %d is administrative down\n", port_no); + return -1; + } + + l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + + VSC9953_REW_OFFSET); + + val = in_le32(&l2rew_reg->port[port_no].port_tag_cfg); + + switch (val & VSC9953_TAG_CFG_MASK) { + case VSC9953_TAG_CFG_NONE: + *mode = EGRESS_UNTAG_ALL; + return 0; + case VSC9953_TAG_CFG_ALL_BUT_PVID_ZERO: + *mode = EGRESS_UNTAG_PVID_AND_ZERO; + return 0; + case VSC9953_TAG_CFG_ALL_BUT_ZERO: + *mode = EGRESS_UNTAG_ZERO; + return 0; + case VSC9953_TAG_CFG_ALL: + *mode = EGRESS_UNTAG_NONE; + return 0; + default: + printf("Unknown egress tagging configuration for port %d\n", + port_no); + return -1; + } +} + +/* Show egress tagging configuration for a VSC9953 port */ +static void vsc9953_port_vlan_egr_untag_show(int port_no) +{ + enum egress_untag_mode mode; + + if (vsc9953_port_vlan_egr_untag_get(port_no, &mode)) { + printf("%7d\t%17s\n", port_no, "-"); return; + } - if (vsc9953_l2sw.port[port_nr].phydev->drv->startup( - vsc9953_l2sw.port[port_nr].phydev)) - printf("Failed to start PHY for port %d\n", port_nr); + printf("%7d\t", port_no); + switch (mode) { + case EGRESS_UNTAG_ALL: + printf("%17s\n", "all"); + break; + case EGRESS_UNTAG_NONE: + printf("%17s\n", "none"); + break; + case EGRESS_UNTAG_PVID_AND_ZERO: + printf("%17s\n", "PVID and 0"); + break; + case EGRESS_UNTAG_ZERO: + printf("%17s\n", "0"); + break; + default: + printf("%17s\n", "-"); + } } +#endif -/* Start autonegotiation for all VSC9953 PHYs */ -static void vsc9953_phy_all_autoneg(void) +static void vsc9953_port_vlan_egr_untag_set(int port_no, + enum egress_untag_mode mode) { - int i; + struct vsc9953_rew_reg *l2rew_reg; + + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) { + printf("Port %d is administrative down\n", port_no); + return; + } + + l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + + VSC9953_REW_OFFSET); + + switch (mode) { + case EGRESS_UNTAG_ALL: + clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, + VSC9953_TAG_CFG_MASK, VSC9953_TAG_CFG_NONE); + break; + case EGRESS_UNTAG_PVID_AND_ZERO: + clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, + VSC9953_TAG_CFG_MASK, + VSC9953_TAG_CFG_ALL_BUT_PVID_ZERO); + break; + case EGRESS_UNTAG_ZERO: + clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, + VSC9953_TAG_CFG_MASK, + VSC9953_TAG_CFG_ALL_BUT_ZERO); + break; + case EGRESS_UNTAG_NONE: + clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, + VSC9953_TAG_CFG_MASK, VSC9953_TAG_CFG_ALL); + break; + default: + printf("Unknown untag mode for port %d\n", port_no); + } +} + +static void vsc9953_port_all_vlan_egress_untagged_set( + enum egress_untag_mode mode) +{ + int i; for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_phy_autoneg(i); + vsc9953_port_vlan_egr_untag_set(i, mode); +} + +#ifdef CONFIG_CMD_ETHSW + +/* Enable/disable status of a VSC9953 port */ +static void vsc9953_port_status_set(int port_no, u8 enabled) +{ + struct vsc9953_qsys_reg *l2qsys_reg; + + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) + return; + + l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + + VSC9953_QSYS_OFFSET); + + if (enabled) + setbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no], + VSC9953_PORT_ENA); + else + clrbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no], + VSC9953_PORT_ENA); +} + +/* Start autonegotiation for a VSC9953 PHY */ +static void vsc9953_phy_autoneg(int port_no) +{ + if (!vsc9953_l2sw.port[port_no].phydev) + return; + + if (vsc9953_l2sw.port[port_no].phydev->drv->startup( + vsc9953_l2sw.port[port_no].phydev)) + printf("Failed to start PHY for port %d\n", port_no); } /* Print a VSC9953 port's configuration */ -static void vsc9953_port_config_show(int port) +static void vsc9953_port_config_show(int port_no) { - int speed; - int duplex; - int link; - u8 enabled; - u32 val; - struct vsc9953_qsys_reg *l2qsys_reg; + int speed; + int duplex; + int link; + u8 enabled; + u32 val; + struct vsc9953_qsys_reg *l2qsys_reg; l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + VSC9953_QSYS_OFFSET); - val = in_le32(&l2qsys_reg->sys.switch_port_mode[port]); - enabled = vsc9953_l2sw.port[port].enabled & - ((val & 0x00002000) >> 13); + val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_no]); + enabled = vsc9953_l2sw.port[port_no].enabled && + (val & VSC9953_PORT_ENA); /* internal ports (8 and 9) are fixed */ - if (VSC9953_INTERNAL_PORT_CHECK(port)) { + if (VSC9953_INTERNAL_PORT_CHECK(port_no)) { link = 1; speed = SPEED_2500; duplex = DUPLEX_FULL; } else { - if (vsc9953_l2sw.port[port].phydev) { - link = vsc9953_l2sw.port[port].phydev->link; - speed = vsc9953_l2sw.port[port].phydev->speed; - duplex = vsc9953_l2sw.port[port].phydev->duplex; + if (vsc9953_l2sw.port[port_no].phydev) { + link = vsc9953_l2sw.port[port_no].phydev->link; + speed = vsc9953_l2sw.port[port_no].phydev->speed; + duplex = vsc9953_l2sw.port[port_no].phydev->duplex; } else { link = -1; speed = -1; @@ -396,7 +660,7 @@ static void vsc9953_port_config_show(int port) } } - printf("%8d ", port); + printf("%8d ", port_no); printf("%8s ", enabled == 1 ? "enabled" : "disabled"); printf("%8s ", link == 1 ? "up" : "down"); @@ -423,75 +687,1575 @@ static void vsc9953_port_config_show(int port) printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half"); } -/* Print VSC9953 ports' configuration */ -static void vsc9953_port_all_config_show(void) +/* Show VSC9953 ports' statistics */ +static void vsc9953_port_statistics_show(int port_no) { - int i; + u32 rx_val; + u32 tx_val; + struct vsc9953_system_reg *l2sys_reg; - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_config_show(i); + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) { + printf("Port %d is administrative down\n", port_no); + return; + } + + l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + + VSC9953_SYS_OFFSET); + + printf("Statistics for L2 Switch port %d:\n", port_no); + + /* Set counter view for our port */ + out_le32(&l2sys_reg->sys.stat_cfg, port_no); + +#define VSC9953_STATS_PRINTF "%-15s %10u" + + /* Get number of Rx and Tx frames */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_short) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_frag) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_jabber) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_long) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_64) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_65_127) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_128_255) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_256_511) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_512_1023) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_1024_1526) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_jumbo); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_64) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_65_127) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_128_255) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_256_511) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_512_1023) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_1024_1526) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_jumbo); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx frames:", rx_val, "Tx frames:", tx_val); + + /* Get number of Rx and Tx bytes */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_oct); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_oct); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx bytes:", rx_val, "Tx bytes:", tx_val); + + /* Get number of Rx frames received ok and Tx frames sent ok */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_0) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_1) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_2) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_3) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_4) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_5) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_6) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_7) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_0) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_1) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_2) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_3) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_4) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_5) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_6) + + in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_7); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_64) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_65_127) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_128_255) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_256_511) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_512_1023) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_1024_1526) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_jumbo); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx frames ok:", rx_val, "Tx frames ok:", tx_val); + + /* Get number of Rx and Tx unicast frames */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_uc); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_uc); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx unicast:", rx_val, "Tx unicast:", tx_val); + + /* Get number of Rx and Tx broadcast frames */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_bc); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_bc); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx broadcast:", rx_val, "Tx broadcast:", tx_val); + + /* Get number of Rx and Tx frames of 64B */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_64); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_64); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx 64B:", rx_val, "Tx 64B:", tx_val); + + /* Get number of Rx and Tx frames with sizes between 65B and 127B */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_65_127); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_65_127); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx 65B-127B:", rx_val, "Tx 65B-127B:", tx_val); + + /* Get number of Rx and Tx frames with sizes between 128B and 255B */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_128_255); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_128_255); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx 128B-255B:", rx_val, "Tx 128B-255B:", tx_val); + + /* Get number of Rx and Tx frames with sizes between 256B and 511B */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_256_511); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_256_511); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx 256B-511B:", rx_val, "Tx 256B-511B:", tx_val); + + /* Get number of Rx and Tx frames with sizes between 512B and 1023B */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_512_1023); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_512_1023); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx 512B-1023B:", rx_val, "Tx 512B-1023B:", tx_val); + + /* Get number of Rx and Tx frames with sizes between 1024B and 1526B */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_1024_1526); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_1024_1526); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx 1024B-1526B:", rx_val, "Tx 1024B-1526B:", tx_val); + + /* Get number of Rx and Tx jumbo frames */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_jumbo); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_jumbo); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx jumbo:", rx_val, "Tx jumbo:", tx_val); + + /* Get number of Rx and Tx dropped frames */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_cat_drop) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_tail) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_0) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_1) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_2) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_3) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_4) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_5) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_6) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_7) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_0) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_1) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_2) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_3) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_4) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_5) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_6) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_7); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_drop) + + in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_aged); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx drops:", rx_val, "Tx drops:", tx_val); + + /* + * Get number of Rx frames with CRC or alignment errors + * and number of detected Tx collisions + */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_crc); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_col); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx CRC&align:", rx_val, "Tx coll:", tx_val); + + /* + * Get number of Rx undersized frames and + * number of Tx aged frames + */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_short); + tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_aged); + printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", + "Rx undersize:", rx_val, "Tx aged:", tx_val); + + /* Get number of Rx oversized frames */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_long); + printf(VSC9953_STATS_PRINTF"\n", "Rx oversized:", rx_val); + + /* Get number of Rx fragmented frames */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_frag); + printf(VSC9953_STATS_PRINTF"\n", "Rx fragments:", rx_val); + + /* Get number of Rx jabber errors */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_jabber); + printf(VSC9953_STATS_PRINTF"\n", "Rx jabbers:", rx_val); + + /* + * Get number of Rx frames filtered due to classification rules or + * no destination ports + */ + rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_cat_drop) + + in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_local); + printf(VSC9953_STATS_PRINTF"\n", "Rx filtered:", rx_val); + + printf("\n"); } -/* function to interpret commands starting with "ethsw " */ -static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +/* Clear statistics for a VSC9953 port */ +static void vsc9953_port_statistics_clear(int port_no) { - u8 enable; - u32 port; + struct vsc9953_system_reg *l2sys_reg; - if (argc < 4) + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) { + printf("Port %d is administrative down\n", port_no); + return; + } + + l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + + VSC9953_SYS_OFFSET); + + /* Clear all counter groups for our ports */ + out_le32(&l2sys_reg->sys.stat_cfg, port_no | + VSC9953_STAT_CLEAR_RX | VSC9953_STAT_CLEAR_TX | + VSC9953_STAT_CLEAR_DR); +} + +enum port_learn_mode { + PORT_LEARN_NONE, + PORT_LEARN_AUTO +}; + +/* Set learning configuration for a VSC9953 port */ +static void vsc9953_port_learn_mode_set(int port_no, enum port_learn_mode mode) +{ + struct vsc9953_analyzer *l2ana_reg; + + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) { + printf("Port %d is administrative down\n", port_no); + return; + } + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + switch (mode) { + case PORT_LEARN_NONE: + clrbits_le32(&l2ana_reg->port[port_no].port_cfg, + VSC9953_PORT_CFG_LEARN_DROP | + VSC9953_PORT_CFG_LEARN_CPU | + VSC9953_PORT_CFG_LEARN_AUTO | + VSC9953_PORT_CFG_LEARN_ENA); + break; + case PORT_LEARN_AUTO: + clrsetbits_le32(&l2ana_reg->port[port_no].port_cfg, + VSC9953_PORT_CFG_LEARN_DROP | + VSC9953_PORT_CFG_LEARN_CPU, + VSC9953_PORT_CFG_LEARN_ENA | + VSC9953_PORT_CFG_LEARN_AUTO); + break; + default: + printf("Unknown learn mode for port %d\n", port_no); + } +} + +/* Get learning configuration for a VSC9953 port */ +static int vsc9953_port_learn_mode_get(int port_no, enum port_learn_mode *mode) +{ + u32 val; + struct vsc9953_analyzer *l2ana_reg; + + /* Administrative down */ + if (!vsc9953_l2sw.port[port_no].enabled) { + printf("Port %d is administrative down\n", port_no); return -1; + } + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + /* For now we only support HW learning (auto) and no learning */ + val = in_le32(&l2ana_reg->port[port_no].port_cfg); + if ((val & (VSC9953_PORT_CFG_LEARN_ENA | + VSC9953_PORT_CFG_LEARN_AUTO)) == + (VSC9953_PORT_CFG_LEARN_ENA | VSC9953_PORT_CFG_LEARN_AUTO)) + *mode = PORT_LEARN_AUTO; + else + *mode = PORT_LEARN_NONE; + + return 0; +} - if (strcmp(argv[1], "port")) +/* wait for FDB to become available */ +static int vsc9953_mac_table_poll_idle(void) +{ + struct vsc9953_analyzer *l2ana_reg; + u32 timeout; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + timeout = 50000; + while (((in_le32(&l2ana_reg->ana_tables.mac_access) & + VSC9953_MAC_CMD_MASK) != + VSC9953_MAC_CMD_IDLE) && --timeout) + udelay(1); + + return timeout ? 0 : -EBUSY; +} + +/* enum describing available commands for the MAC table */ +enum mac_table_cmd { + MAC_TABLE_READ, + MAC_TABLE_LOOKUP, + MAC_TABLE_WRITE, + MAC_TABLE_LEARN, + MAC_TABLE_FORGET, + MAC_TABLE_GET_NEXT, + MAC_TABLE_AGE, +}; + +/* Issues a command to the FDB table */ +static int vsc9953_mac_table_cmd(enum mac_table_cmd cmd) +{ + struct vsc9953_analyzer *l2ana_reg; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + switch (cmd) { + case MAC_TABLE_READ: + clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, + VSC9953_MAC_CMD_MASK | VSC9953_MAC_CMD_VALID, + VSC9953_MAC_CMD_READ); + break; + case MAC_TABLE_LOOKUP: + clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, + VSC9953_MAC_CMD_MASK, VSC9953_MAC_CMD_READ | + VSC9953_MAC_CMD_VALID); + break; + case MAC_TABLE_WRITE: + clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, + VSC9953_MAC_CMD_MASK | + VSC9953_MAC_ENTRYTYPE_MASK, + VSC9953_MAC_CMD_WRITE | + VSC9953_MAC_ENTRYTYPE_LOCKED); + break; + case MAC_TABLE_LEARN: + clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, + VSC9953_MAC_CMD_MASK | + VSC9953_MAC_ENTRYTYPE_MASK, + VSC9953_MAC_CMD_LEARN | + VSC9953_MAC_ENTRYTYPE_LOCKED | + VSC9953_MAC_CMD_VALID); + break; + case MAC_TABLE_FORGET: + clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, + VSC9953_MAC_CMD_MASK | + VSC9953_MAC_ENTRYTYPE_MASK, + VSC9953_MAC_CMD_FORGET); + break; + case MAC_TABLE_GET_NEXT: + clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, + VSC9953_MAC_CMD_MASK | + VSC9953_MAC_ENTRYTYPE_MASK, + VSC9953_MAC_CMD_NEXT); + break; + case MAC_TABLE_AGE: + clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, + VSC9953_MAC_CMD_MASK | + VSC9953_MAC_ENTRYTYPE_MASK, + VSC9953_MAC_CMD_AGE); + break; + default: + printf("Unknown MAC table command\n"); + } + + if (vsc9953_mac_table_poll_idle() < 0) { + debug("MAC table timeout\n"); return -1; + } - if (!strcmp(argv[3], "show")) { - if (!strcmp(argv[2], "all")) { - vsc9953_phy_all_autoneg(); - printf("%8s %8s %8s %8s %8s\n", - "Port", "Status", "Link", "Speed", - "Duplex"); - vsc9953_port_all_config_show(); - return 0; - } else { - port = simple_strtoul(argv[2], NULL, 10); - if (!VSC9953_PORT_CHECK(port)) - return -1; - vsc9953_phy_autoneg(port); - printf("%8s %8s %8s %8s %8s\n", - "Port", "Status", "Link", "Speed", - "Duplex"); - vsc9953_port_config_show(port); - return 0; - } - } else if (!strcmp(argv[3], "enable")) { - enable = 1; - } else if (!strcmp(argv[3], "disable")) { - enable = 0; + return 0; +} + +/* show the FDB entries that correspond to a port and a VLAN */ +static void vsc9953_mac_table_show(int port_no, int vid) +{ + int rc[VSC9953_MAX_PORTS]; + enum port_learn_mode mode[VSC9953_MAX_PORTS]; + int i; + u32 val; + u32 vlan; + u32 mach; + u32 macl; + u32 dest_indx; + struct vsc9953_analyzer *l2ana_reg; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + /* disable auto learning */ + if (port_no == ETHSW_CMD_PORT_ALL) { + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + rc[i] = vsc9953_port_learn_mode_get(i, &mode[i]); + if (!rc[i] && mode[i] != PORT_LEARN_NONE) + vsc9953_port_learn_mode_set(i, PORT_LEARN_NONE); + } + } else { + rc[port_no] = vsc9953_port_learn_mode_get(port_no, + &mode[port_no]); + if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) + vsc9953_port_learn_mode_set(port_no, PORT_LEARN_NONE); + } + + /* write port and vid to get selected FDB entries */ + val = in_le32(&l2ana_reg->ana.anag_efil); + if (port_no != ETHSW_CMD_PORT_ALL) { + val = bitfield_replace_by_mask(val, VSC9953_AGE_PORT_MASK, + port_no) | VSC9953_AGE_PORT_EN; + } + if (vid != ETHSW_CMD_VLAN_ALL) { + val = bitfield_replace_by_mask(val, VSC9953_AGE_VID_MASK, + vid) | VSC9953_AGE_VID_EN; + } + out_le32(&l2ana_reg->ana.anag_efil, val); + + /* set MAC and VLAN to 0 to look from beginning */ + clrbits_le32(&l2ana_reg->ana_tables.mach_data, + VSC9953_MAC_VID_MASK | VSC9953_MAC_MACH_MASK); + out_le32(&l2ana_reg->ana_tables.macl_data, 0); + + /* get entries */ + printf("%10s %17s %5s %4s\n", "EntryType", "MAC", "PORT", "VID"); + do { + if (vsc9953_mac_table_cmd(MAC_TABLE_GET_NEXT) < 0) { + debug("GET NEXT MAC table command failed\n"); + break; + } + + val = in_le32(&l2ana_reg->ana_tables.mac_access); + + /* get out when an invalid entry is found */ + if (!(val & VSC9953_MAC_CMD_VALID)) + break; + + switch (val & VSC9953_MAC_ENTRYTYPE_MASK) { + case VSC9953_MAC_ENTRYTYPE_NORMAL: + printf("%10s ", "Dynamic"); + break; + case VSC9953_MAC_ENTRYTYPE_LOCKED: + printf("%10s ", "Static"); + break; + case VSC9953_MAC_ENTRYTYPE_IPV4MCAST: + printf("%10s ", "IPv4 Mcast"); + break; + case VSC9953_MAC_ENTRYTYPE_IPV6MCAST: + printf("%10s ", "IPv6 Mcast"); + break; + default: + printf("%10s ", "Unknown"); + } + + dest_indx = bitfield_extract_by_mask(val, + VSC9953_MAC_DESTIDX_MASK); + + val = in_le32(&l2ana_reg->ana_tables.mach_data); + vlan = bitfield_extract_by_mask(val, VSC9953_MAC_VID_MASK); + mach = bitfield_extract_by_mask(val, VSC9953_MAC_MACH_MASK); + macl = in_le32(&l2ana_reg->ana_tables.macl_data); + + printf("%02x:%02x:%02x:%02x:%02x:%02x ", (mach >> 8) & 0xff, + mach & 0xff, (macl >> 24) & 0xff, (macl >> 16) & 0xff, + (macl >> 8) & 0xff, macl & 0xff); + printf("%5d ", dest_indx); + printf("%4d\n", vlan); + } while (1); + + /* set learning mode to previous value */ + if (port_no == ETHSW_CMD_PORT_ALL) { + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + if (!rc[i] && mode[i] != PORT_LEARN_NONE) + vsc9953_port_learn_mode_set(i, mode[i]); + } } else { + /* If administrative down, skip */ + if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) + vsc9953_port_learn_mode_set(port_no, mode[port_no]); + } + + /* reset FDB port and VLAN FDB selection */ + clrbits_le32(&l2ana_reg->ana.anag_efil, VSC9953_AGE_PORT_EN | + VSC9953_AGE_PORT_MASK | VSC9953_AGE_VID_EN | + VSC9953_AGE_VID_MASK); +} + +/* Add a static FDB entry */ +static int vsc9953_mac_table_add(u8 port_no, uchar mac[6], int vid) +{ + u32 val; + struct vsc9953_analyzer *l2ana_reg; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + val = in_le32(&l2ana_reg->ana_tables.mach_data); + val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | + (mac[0] << 8) | (mac[1] << 0); + out_le32(&l2ana_reg->ana_tables.mach_data, val); + + out_le32(&l2ana_reg->ana_tables.macl_data, + (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | + (mac[5] << 0)); + + /* set on which port is the MAC address added */ + val = in_le32(&l2ana_reg->ana_tables.mac_access); + val = bitfield_replace_by_mask(val, VSC9953_MAC_DESTIDX_MASK, port_no); + out_le32(&l2ana_reg->ana_tables.mac_access, val); + + if (vsc9953_mac_table_cmd(MAC_TABLE_LEARN) < 0) + return -1; + + /* check if the MAC address was indeed added */ + val = in_le32(&l2ana_reg->ana_tables.mach_data); + val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | + (mac[0] << 8) | (mac[1] << 0); + out_le32(&l2ana_reg->ana_tables.mach_data, val); + + out_le32(&l2ana_reg->ana_tables.macl_data, + (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | + (mac[5] << 0)); + + if (vsc9953_mac_table_cmd(MAC_TABLE_READ) < 0) + return -1; + + val = in_le32(&l2ana_reg->ana_tables.mac_access); + + if ((port_no != bitfield_extract_by_mask(val, + VSC9953_MAC_DESTIDX_MASK))) { + printf("Failed to add MAC address\n"); return -1; } + return 0; +} - if (!strcmp(argv[2], "all")) { - vsc9953_port_all_status_set(enable); - return 0; +/* Delete a FDB entry */ +static int vsc9953_mac_table_del(uchar mac[6], u16 vid) +{ + u32 val; + struct vsc9953_analyzer *l2ana_reg; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + /* check first if MAC entry is present */ + val = in_le32(&l2ana_reg->ana_tables.mach_data); + val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | + (mac[0] << 8) | (mac[1] << 0); + out_le32(&l2ana_reg->ana_tables.mach_data, val); + + out_le32(&l2ana_reg->ana_tables.macl_data, + (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | + (mac[5] << 0)); + + if (vsc9953_mac_table_cmd(MAC_TABLE_LOOKUP) < 0) { + debug("Lookup in the MAC table failed\n"); + return -1; + } + + if (!(in_le32(&l2ana_reg->ana_tables.mac_access) & + VSC9953_MAC_CMD_VALID)) { + printf("The MAC address: %02x:%02x:%02x:%02x:%02x:%02x ", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); + printf("VLAN: %d does not exist.\n", vid); + return -1; + } + + /* FDB entry found, proceed to delete */ + val = in_le32(&l2ana_reg->ana_tables.mach_data); + val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | + (mac[0] << 8) | (mac[1] << 0); + out_le32(&l2ana_reg->ana_tables.mach_data, val); + + out_le32(&l2ana_reg->ana_tables.macl_data, (mac[2] << 24) | + (mac[3] << 16) | (mac[4] << 8) | (mac[5] << 0)); + + if (vsc9953_mac_table_cmd(MAC_TABLE_FORGET) < 0) + return -1; + + /* check if the MAC entry is still in FDB */ + val = in_le32(&l2ana_reg->ana_tables.mach_data); + val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | + (mac[0] << 8) | (mac[1] << 0); + out_le32(&l2ana_reg->ana_tables.mach_data, val); + + out_le32(&l2ana_reg->ana_tables.macl_data, (mac[2] << 24) | + (mac[3] << 16) | (mac[4] << 8) | (mac[5] << 0)); + + if (vsc9953_mac_table_cmd(MAC_TABLE_LOOKUP) < 0) { + debug("Lookup in the MAC table failed\n"); + return -1; + } + if (in_le32(&l2ana_reg->ana_tables.mac_access) & + VSC9953_MAC_CMD_VALID) { + printf("Failed to delete MAC address\n"); + return -1; + } + + return 0; +} + +/* age the unlocked entries in FDB */ +static void vsc9953_mac_table_age(int port_no, int vid) +{ + int rc[VSC9953_MAX_PORTS]; + enum port_learn_mode mode[VSC9953_MAX_PORTS]; + u32 val; + int i; + struct vsc9953_analyzer *l2ana_reg; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + /* set port and VID for selective aging */ + val = in_le32(&l2ana_reg->ana.anag_efil); + if (port_no != ETHSW_CMD_PORT_ALL) { + /* disable auto learning */ + rc[port_no] = vsc9953_port_learn_mode_get(port_no, + &mode[port_no]); + if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) + vsc9953_port_learn_mode_set(port_no, PORT_LEARN_NONE); + + val = bitfield_replace_by_mask(val, VSC9953_AGE_PORT_MASK, + port_no) | VSC9953_AGE_PORT_EN; } else { - port = simple_strtoul(argv[2], NULL, 10); - if (!VSC9953_PORT_CHECK(port)) - return -1; - vsc9953_port_status_set(port, enable); - return 0; + /* disable auto learning on all ports */ + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + rc[i] = vsc9953_port_learn_mode_get(i, &mode[i]); + if (!rc[i] && mode[i] != PORT_LEARN_NONE) + vsc9953_port_learn_mode_set(i, PORT_LEARN_NONE); + } + } + + if (vid != ETHSW_CMD_VLAN_ALL) { + val = bitfield_replace_by_mask(val, VSC9953_AGE_VID_MASK, vid) | + VSC9953_AGE_VID_EN; + } + out_le32(&l2ana_reg->ana.anag_efil, val); + + /* age the dynamic FDB entries */ + vsc9953_mac_table_cmd(MAC_TABLE_AGE); + + /* clear previously set port and VID */ + clrbits_le32(&l2ana_reg->ana.anag_efil, VSC9953_AGE_PORT_EN | + VSC9953_AGE_PORT_MASK | VSC9953_AGE_VID_EN | + VSC9953_AGE_VID_MASK); + + if (port_no != ETHSW_CMD_PORT_ALL) { + if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) + vsc9953_port_learn_mode_set(port_no, mode[port_no]); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + if (!rc[i] && mode[i] != PORT_LEARN_NONE) + vsc9953_port_learn_mode_set(i, mode[i]); + } + } +} + +/* Delete all the dynamic FDB entries */ +static void vsc9953_mac_table_flush(int port, int vid) +{ + vsc9953_mac_table_age(port, vid); + vsc9953_mac_table_age(port, vid); +} + +enum egress_vlan_tag { + EGR_TAG_CLASS = 0, + EGR_TAG_PVID, +}; + +/* Set egress tag mode for a VSC9953 port */ +static void vsc9953_port_vlan_egress_tag_set(int port_no, + enum egress_vlan_tag mode) +{ + struct vsc9953_rew_reg *l2rew_reg; + + l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + + VSC9953_REW_OFFSET); + + switch (mode) { + case EGR_TAG_CLASS: + clrbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, + VSC9953_TAG_VID_PVID); + break; + case EGR_TAG_PVID: + setbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, + VSC9953_TAG_VID_PVID); + break; + default: + printf("Unknown egress VLAN tag mode for port %d\n", port_no); } +} - return -1; +/* Get egress tag mode for a VSC9953 port */ +static void vsc9953_port_vlan_egress_tag_get(int port_no, + enum egress_vlan_tag *mode) +{ + u32 val; + struct vsc9953_rew_reg *l2rew_reg; + + l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + + VSC9953_REW_OFFSET); + + val = in_le32(&l2rew_reg->port[port_no].port_tag_cfg); + if (val & VSC9953_TAG_VID_PVID) + *mode = EGR_TAG_PVID; + else + *mode = EGR_TAG_CLASS; } -U_BOOT_CMD(ethsw, 5, 0, do_ethsw, - "vsc9953 l2 switch commands", - "port <port_nr> enable|disable\n" - " - enable/disable an l2 switch port\n" - " port_nr=0..9; use \"all\" for all ports\n" - "ethsw port <port_nr> show\n" - " - show an l2 switch port's configuration\n" - " port_nr=0..9; use \"all\" for all ports\n" -); -#endif /* CONFIG_VSC9953_CMD */ +/* VSC9953 VLAN learning modes */ +enum vlan_learning_mode { + SHARED_VLAN_LEARNING, + PRIVATE_VLAN_LEARNING, +}; + +/* Set VLAN learning mode for VSC9953 */ +static void vsc9953_vlan_learning_set(enum vlan_learning_mode lrn_mode) +{ + struct vsc9953_analyzer *l2ana_reg; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + switch (lrn_mode) { + case SHARED_VLAN_LEARNING: + setbits_le32(&l2ana_reg->ana.agen_ctrl, VSC9953_FID_MASK_ALL); + break; + case PRIVATE_VLAN_LEARNING: + clrbits_le32(&l2ana_reg->ana.agen_ctrl, VSC9953_FID_MASK_ALL); + break; + default: + printf("Unknown VLAN learn mode\n"); + } +} + +/* Get VLAN learning mode for VSC9953 */ +static int vsc9953_vlan_learning_get(enum vlan_learning_mode *lrn_mode) +{ + u32 val; + struct vsc9953_analyzer *l2ana_reg; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + val = in_le32(&l2ana_reg->ana.agen_ctrl); + + if (!(val & VSC9953_FID_MASK_ALL)) { + *lrn_mode = PRIVATE_VLAN_LEARNING; + } else if ((val & VSC9953_FID_MASK_ALL) == VSC9953_FID_MASK_ALL) { + *lrn_mode = SHARED_VLAN_LEARNING; + } else { + printf("Unknown VLAN learning mode\n"); + return -EINVAL; + } + + return 0; +} + +/* Enable/disable VLAN ingress filtering on a VSC9953 port */ +static void vsc9953_port_ingress_filtering_set(int port_no, int enabled) +{ + struct vsc9953_analyzer *l2ana_reg; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + if (enabled) + setbits_le32(&l2ana_reg->ana.vlan_mask, 1 << port_no); + else + clrbits_le32(&l2ana_reg->ana.vlan_mask, 1 << port_no); +} + +/* Return VLAN ingress filtering on a VSC9953 port */ +static int vsc9953_port_ingress_filtering_get(int port_no) +{ + u32 val; + struct vsc9953_analyzer *l2ana_reg; + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + val = in_le32(&l2ana_reg->ana.vlan_mask); + return !!(val & (1 << port_no)); +} + +static int vsc9953_port_status_key_func(struct ethsw_command_def *parsed_cmd) +{ + int i; + u8 enabled; + + /* Last keyword should tell us if we should enable/disable the port */ + if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_enable) + enabled = 1; + else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_disable) + enabled = 0; + else + return CMD_RET_USAGE; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_port_status_set(parsed_cmd->port, enabled); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_status_set(i, enabled); + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_port_config_key_func(struct ethsw_command_def *parsed_cmd) +{ + int i; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_phy_autoneg(parsed_cmd->port); + printf("%8s %8s %8s %8s %8s\n", + "Port", "Status", "Link", "Speed", + "Duplex"); + vsc9953_port_config_show(parsed_cmd->port); + + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_phy_autoneg(i); + printf("%8s %8s %8s %8s %8s\n", + "Port", "Status", "Link", "Speed", "Duplex"); + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_config_show(i); + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_port_stats_key_func(struct ethsw_command_def *parsed_cmd) +{ + int i; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_port_statistics_show(parsed_cmd->port); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_statistics_show(i); + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_port_stats_clear_key_func(struct ethsw_command_def + *parsed_cmd) +{ + int i; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_port_statistics_clear(parsed_cmd->port); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_statistics_clear(i); + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_learn_show_key_func(struct ethsw_command_def *parsed_cmd) +{ + int i; + enum port_learn_mode mode; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + if (vsc9953_port_learn_mode_get(parsed_cmd->port, &mode)) + return CMD_RET_FAILURE; + printf("%7s %11s\n", "Port", "Learn mode"); + switch (mode) { + case PORT_LEARN_NONE: + printf("%7d %11s\n", parsed_cmd->port, "disable"); + break; + case PORT_LEARN_AUTO: + printf("%7d %11s\n", parsed_cmd->port, "auto"); + break; + default: + printf("%7d %11s\n", parsed_cmd->port, "-"); + } + } else { + printf("%7s %11s\n", "Port", "Learn mode"); + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + if (vsc9953_port_learn_mode_get(i, &mode)) + continue; + switch (mode) { + case PORT_LEARN_NONE: + printf("%7d %11s\n", i, "disable"); + break; + case PORT_LEARN_AUTO: + printf("%7d %11s\n", i, "auto"); + break; + default: + printf("%7d %11s\n", i, "-"); + } + } + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_learn_set_key_func(struct ethsw_command_def *parsed_cmd) +{ + int i; + enum port_learn_mode mode; + + /* Last keyword should tell us the learn mode */ + if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_auto) + mode = PORT_LEARN_AUTO; + else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_disable) + mode = PORT_LEARN_NONE; + else + return CMD_RET_USAGE; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_port_learn_mode_set(parsed_cmd->port, mode); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_learn_mode_set(i, mode); + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_fdb_show_key_func(struct ethsw_command_def *parsed_cmd) +{ + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL && + !VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + + if (parsed_cmd->vid != ETHSW_CMD_VLAN_ALL && + !VSC9953_VLAN_CHECK(parsed_cmd->vid)) { + printf("Invalid VID number: %d\n", parsed_cmd->vid); + return CMD_RET_FAILURE; + } + + vsc9953_mac_table_show(parsed_cmd->port, parsed_cmd->vid); + + return CMD_RET_SUCCESS; +} + +static int vsc9953_fdb_flush_key_func(struct ethsw_command_def *parsed_cmd) +{ + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL && + !VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + + if (parsed_cmd->vid != ETHSW_CMD_VLAN_ALL && + !VSC9953_VLAN_CHECK(parsed_cmd->vid)) { + printf("Invalid VID number: %d\n", parsed_cmd->vid); + return CMD_RET_FAILURE; + } + + vsc9953_mac_table_flush(parsed_cmd->port, parsed_cmd->vid); + + return CMD_RET_SUCCESS; +} + +static int vsc9953_fdb_entry_add_key_func(struct ethsw_command_def *parsed_cmd) +{ + int vid; + + /* a port number must be present */ + if (parsed_cmd->port == ETHSW_CMD_PORT_ALL) { + printf("Please specify a port\n"); + return CMD_RET_FAILURE; + } + + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + + /* Use VLAN 1 if VID is not set */ + vid = (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL ? 1 : parsed_cmd->vid); + + if (!VSC9953_VLAN_CHECK(vid)) { + printf("Invalid VID number: %d\n", vid); + return CMD_RET_FAILURE; + } + + if (vsc9953_mac_table_add(parsed_cmd->port, parsed_cmd->ethaddr, vid)) + return CMD_RET_FAILURE; + + return CMD_RET_SUCCESS; +} + +static int vsc9953_fdb_entry_del_key_func(struct ethsw_command_def *parsed_cmd) +{ + int vid; + + /* Use VLAN 1 if VID is not set */ + vid = (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL ? 1 : parsed_cmd->vid); + + if (!VSC9953_VLAN_CHECK(vid)) { + printf("Invalid VID number: %d\n", vid); + return CMD_RET_FAILURE; + } + + if (vsc9953_mac_table_del(parsed_cmd->ethaddr, vid)) + return CMD_RET_FAILURE; + + return CMD_RET_SUCCESS; +} + +static int vsc9953_pvid_show_key_func(struct ethsw_command_def *parsed_cmd) +{ + int i; + int pvid; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + + if (vsc9953_port_vlan_pvid_get(parsed_cmd->port, &pvid)) + return CMD_RET_FAILURE; + printf("%7s %7s\n", "Port", "PVID"); + printf("%7d %7d\n", parsed_cmd->port, pvid); + } else { + printf("%7s %7s\n", "Port", "PVID"); + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + if (vsc9953_port_vlan_pvid_get(i, &pvid)) + continue; + printf("%7d %7d\n", i, pvid); + } + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_pvid_set_key_func(struct ethsw_command_def *parsed_cmd) +{ + /* PVID number should be set in parsed_cmd->vid */ + if (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL) { + printf("Please set a pvid value\n"); + return CMD_RET_FAILURE; + } + + if (!VSC9953_VLAN_CHECK(parsed_cmd->vid)) { + printf("Invalid VID number: %d\n", parsed_cmd->vid); + return CMD_RET_FAILURE; + } + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_port_vlan_pvid_set(parsed_cmd->port, parsed_cmd->vid); + } else { + vsc9953_port_all_vlan_pvid_set(parsed_cmd->vid); + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_vlan_show_key_func(struct ethsw_command_def *parsed_cmd) +{ + int i; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_vlan_membership_show(parsed_cmd->port); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_vlan_membership_show(i); + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_vlan_set_key_func(struct ethsw_command_def *parsed_cmd) +{ + int i; + int add; + + /* VLAN should be set in parsed_cmd->vid */ + if (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL) { + printf("Please set a vlan value\n"); + return CMD_RET_FAILURE; + } + + if (!VSC9953_VLAN_CHECK(parsed_cmd->vid)) { + printf("Invalid VID number: %d\n", parsed_cmd->vid); + return CMD_RET_FAILURE; + } + + /* keywords add/delete should be the last but one in array */ + if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 2] == + ethsw_id_add) + add = 1; + else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 2] == + ethsw_id_del) + add = 0; + else + return CMD_RET_USAGE; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_vlan_table_membership_set(parsed_cmd->vid, + parsed_cmd->port, add); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_vlan_table_membership_set(parsed_cmd->vid, i, + add); + } + + return CMD_RET_SUCCESS; +} +static int vsc9953_port_untag_show_key_func( + struct ethsw_command_def *parsed_cmd) +{ + int i; + + printf("%7s\t%17s\n", "Port", "Untag"); + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_port_vlan_egr_untag_show(parsed_cmd->port); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_vlan_egr_untag_show(i); + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_port_untag_set_key_func(struct ethsw_command_def *parsed_cmd) +{ + int i; + enum egress_untag_mode mode; + + /* keywords for the untagged mode are the last in the array */ + if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_all) + mode = EGRESS_UNTAG_ALL; + else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_none) + mode = EGRESS_UNTAG_NONE; + else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_pvid) + mode = EGRESS_UNTAG_PVID_AND_ZERO; + else + return CMD_RET_USAGE; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_port_vlan_egr_untag_set(parsed_cmd->port, mode); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_vlan_egr_untag_set(i, mode); + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_egr_vlan_tag_show_key_func( + struct ethsw_command_def *parsed_cmd) +{ + int i; + enum egress_vlan_tag mode; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_port_vlan_egress_tag_get(parsed_cmd->port, &mode); + printf("%7s\t%12s\n", "Port", "Egress VID"); + printf("%7d\t", parsed_cmd->port); + switch (mode) { + case EGR_TAG_CLASS: + printf("%12s\n", "classified"); + break; + case EGR_TAG_PVID: + printf("%12s\n", "pvid"); + break; + default: + printf("%12s\n", "-"); + } + } else { + printf("%7s\t%12s\n", "Port", "Egress VID"); + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + vsc9953_port_vlan_egress_tag_get(i, &mode); + switch (mode) { + case EGR_TAG_CLASS: + printf("%7d\t%12s\n", i, "classified"); + break; + case EGR_TAG_PVID: + printf("%7d\t%12s\n", i, "pvid"); + break; + default: + printf("%7d\t%12s\n", i, "-"); + } + } + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_egr_vlan_tag_set_key_func( + struct ethsw_command_def *parsed_cmd) +{ + int i; + enum egress_vlan_tag mode; + + /* keywords for the egress vlan tag mode are the last in the array */ + if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_pvid) + mode = EGR_TAG_PVID; + else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_classified) + mode = EGR_TAG_CLASS; + else + return CMD_RET_USAGE; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_port_vlan_egress_tag_set(parsed_cmd->port, mode); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_vlan_egress_tag_set(i, mode); + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_vlan_learn_show_key_func( + struct ethsw_command_def *parsed_cmd) +{ + int rc; + enum vlan_learning_mode mode; + + rc = vsc9953_vlan_learning_get(&mode); + if (rc) + return CMD_RET_FAILURE; + + switch (mode) { + case SHARED_VLAN_LEARNING: + printf("VLAN learning mode: shared\n"); + break; + case PRIVATE_VLAN_LEARNING: + printf("VLAN learning mode: private\n"); + break; + default: + printf("Unknown VLAN learning mode\n"); + rc = CMD_RET_FAILURE; + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_vlan_learn_set_key_func(struct ethsw_command_def *parsed_cmd) +{ + enum vlan_learning_mode mode; + + /* keywords for shared/private are the last in the array */ + if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_shared) + mode = SHARED_VLAN_LEARNING; + else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_private) + mode = PRIVATE_VLAN_LEARNING; + else + return CMD_RET_USAGE; + + vsc9953_vlan_learning_set(mode); + + return CMD_RET_SUCCESS; +} + +static int vsc9953_ingr_fltr_show_key_func(struct ethsw_command_def *parsed_cmd) +{ + int i; + int enabled; + + printf("%7s\t%18s\n", "Port", "Ingress filtering"); + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + enabled = vsc9953_port_ingress_filtering_get(parsed_cmd->port); + printf("%7d\t%18s\n", parsed_cmd->port, enabled ? "enable" : + "disable"); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + enabled = vsc9953_port_ingress_filtering_get(i); + printf("%7d\t%18s\n", parsed_cmd->port, enabled ? + "enable" : + "disable"); + } + } + + return CMD_RET_SUCCESS; +} + +static int vsc9953_ingr_fltr_set_key_func(struct ethsw_command_def *parsed_cmd) +{ + int i; + int enable; + + /* keywords for enabling/disabling ingress filtering + * are the last in the array + */ + if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_enable) + enable = 1; + else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == + ethsw_id_disable) + enable = 0; + else + return CMD_RET_USAGE; + + if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { + if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { + printf("Invalid port number: %d\n", parsed_cmd->port); + return CMD_RET_FAILURE; + } + vsc9953_port_ingress_filtering_set(parsed_cmd->port, enable); + } else { + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_ingress_filtering_set(i, enable); + } + + return CMD_RET_SUCCESS; +} + +static struct ethsw_command_func vsc9953_cmd_func = { + .ethsw_name = "L2 Switch VSC9953", + .port_enable = &vsc9953_port_status_key_func, + .port_disable = &vsc9953_port_status_key_func, + .port_show = &vsc9953_port_config_key_func, + .port_stats = &vsc9953_port_stats_key_func, + .port_stats_clear = &vsc9953_port_stats_clear_key_func, + .port_learn = &vsc9953_learn_set_key_func, + .port_learn_show = &vsc9953_learn_show_key_func, + .fdb_show = &vsc9953_fdb_show_key_func, + .fdb_flush = &vsc9953_fdb_flush_key_func, + .fdb_entry_add = &vsc9953_fdb_entry_add_key_func, + .fdb_entry_del = &vsc9953_fdb_entry_del_key_func, + .pvid_show = &vsc9953_pvid_show_key_func, + .pvid_set = &vsc9953_pvid_set_key_func, + .vlan_show = &vsc9953_vlan_show_key_func, + .vlan_set = &vsc9953_vlan_set_key_func, + .port_untag_show = &vsc9953_port_untag_show_key_func, + .port_untag_set = &vsc9953_port_untag_set_key_func, + .port_egr_vlan_show = &vsc9953_egr_vlan_tag_show_key_func, + .port_egr_vlan_set = &vsc9953_egr_vlan_tag_set_key_func, + .vlan_learn_show = &vsc9953_vlan_learn_show_key_func, + .vlan_learn_set = &vsc9953_vlan_learn_set_key_func, + .port_ingr_filt_show = &vsc9953_ingr_fltr_show_key_func, + .port_ingr_filt_set = &vsc9953_ingr_fltr_set_key_func +}; + +#endif /* CONFIG_CMD_ETHSW */ + +/***************************************************************************** +At startup, the default configuration would be: + - HW learning enabled on all ports; (HW default) + - All ports are in VLAN 1; + - All ports are VLAN aware; + - All ports have POP_COUNT 1; + - All ports have PVID 1; + - All ports have TPID 0x8100; (HW default) + - All ports tag frames classified to all VLANs that are not PVID; +*****************************************************************************/ +void vsc9953_default_configuration(void) +{ + int i; + + for (i = 0; i < VSC9953_MAX_VLAN; i++) + vsc9953_vlan_table_membership_all_set(i, 0); + vsc9953_port_all_vlan_aware_set(1); + vsc9953_port_all_vlan_pvid_set(1); + vsc9953_port_all_vlan_poncnt_set(1); + vsc9953_vlan_table_membership_all_set(1, 1); + vsc9953_vlan_ingr_fltr_learn_drop(1); + vsc9953_port_all_vlan_egress_untagged_set(EGRESS_UNTAG_PVID_AND_ZERO); +} + +void vsc9953_init(bd_t *bis) +{ + u32 i; + u32 hdx_cfg = 0; + u32 phy_addr = 0; + int timeout; + struct vsc9953_system_reg *l2sys_reg; + struct vsc9953_qsys_reg *l2qsys_reg; + struct vsc9953_dev_gmii *l2dev_gmii_reg; + struct vsc9953_analyzer *l2ana_reg; + struct vsc9953_devcpu_gcb *l2dev_gcb; + + l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET + + VSC9953_DEV_GMII_OFFSET); + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + + VSC9953_SYS_OFFSET); + + l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + + VSC9953_QSYS_OFFSET); + + l2dev_gcb = (struct vsc9953_devcpu_gcb *)(VSC9953_OFFSET + + VSC9953_DEVCPU_GCB); + + out_le32(&l2dev_gcb->chip_regs.soft_rst, + VSC9953_SOFT_SWC_RST_ENA); + timeout = 50000; + while ((in_le32(&l2dev_gcb->chip_regs.soft_rst) & + VSC9953_SOFT_SWC_RST_ENA) && --timeout) + udelay(1); /* busy wait for vsc9953 soft reset */ + if (timeout == 0) + debug("Timeout waiting for VSC9953 to reset\n"); + + out_le32(&l2sys_reg->sys.reset_cfg, VSC9953_MEM_ENABLE | + VSC9953_MEM_INIT); + + timeout = 50000; + while ((in_le32(&l2sys_reg->sys.reset_cfg) & + VSC9953_MEM_INIT) && --timeout) + udelay(1); /* busy wait for vsc9953 memory init */ + if (timeout == 0) + debug("Timeout waiting for VSC9953 memory to initialize\n"); + + out_le32(&l2sys_reg->sys.reset_cfg, (in_le32(&l2sys_reg->sys.reset_cfg) + | VSC9953_CORE_ENABLE)); + + /* VSC9953 Setting to be done once only */ + out_le32(&l2qsys_reg->sys.ext_cpu_cfg, 0x00000b00); + + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + if (vsc9953_port_init(i)) + printf("Failed to initialize l2switch port %d\n", i); + + /* Enable VSC9953 GMII Ports Port ID 0 - 7 */ + if (VSC9953_INTERNAL_PORT_CHECK(i)) { + out_le32(&l2ana_reg->pfc[i].pfc_cfg, + VSC9953_PFC_FC_QSGMII); + out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], + VSC9953_MAC_FC_CFG_QSGMII); + } else { + out_le32(&l2ana_reg->pfc[i].pfc_cfg, + VSC9953_PFC_FC); + out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], + VSC9953_MAC_FC_CFG); + } + out_le32(&l2dev_gmii_reg->port_mode.clock_cfg, + VSC9953_CLOCK_CFG); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg, + VSC9953_MAC_ENA_CFG); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_mode_cfg, + VSC9953_MAC_MODE_CFG); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ifg_cfg, + VSC9953_MAC_IFG_CFG); + /* mac_hdx_cfg varies with port id*/ + hdx_cfg = VSC9953_MAC_HDX_CFG | (i << 16); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_hdx_cfg, hdx_cfg); + out_le32(&l2sys_reg->sys.front_port_mode[i], + VSC9953_FRONT_PORT_MODE); + setbits_le32(&l2qsys_reg->sys.switch_port_mode[i], + VSC9953_PORT_ENA); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_maxlen_cfg, + VSC9953_MAC_MAX_LEN); + out_le32(&l2sys_reg->pause_cfg.pause_cfg[i], + VSC9953_PAUSE_CFG); + /* WAIT FOR 2 us*/ + udelay(2); + + l2dev_gmii_reg = (struct vsc9953_dev_gmii *)( + (char *)l2dev_gmii_reg + + T1040_SWITCH_GMII_DEV_OFFSET); + + /* Initialize Lynx PHY Wrappers */ + phy_addr = 0; + if (vsc9953_l2sw.port[i].enet_if == + PHY_INTERFACE_MODE_QSGMII) + phy_addr = (i + 0x4) & 0x1F; + else if (vsc9953_l2sw.port[i].enet_if == + PHY_INTERFACE_MODE_SGMII) + phy_addr = (i + 1) & 0x1F; + + if (phy_addr) { + /* SGMII IF mode + AN enable */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x14, PHY_SGMII_IF_MODE_AN | + PHY_SGMII_IF_MODE_SGMII); + /* Dev ability according to SGMII specification */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x4, PHY_SGMII_DEV_ABILITY_SGMII); + /* Adjust link timer for SGMII + * 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 + */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x13, 0x0003); + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x12, 0x0d40); + /* Restart AN */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x0, PHY_SGMII_CR_DEF_VAL | + PHY_SGMII_CR_RESET_AN); + + timeout = 50000; + while ((vsc9953_mdio_read(&l2dev_gcb->mii_mng[0], + phy_addr, 0x01) & 0x0020) && --timeout) + udelay(1); /* wait for AN to complete */ + if (timeout == 0) + debug("Timeout waiting for AN to complete\n"); + } + } + + vsc9953_default_configuration(); + +#ifdef CONFIG_CMD_ETHSW + if (ethsw_define_functions(&vsc9953_cmd_func) < 0) + debug("Unable to use \"ethsw\" commands\n"); +#endif + + printf("VSC9953 L2 switch initialized\n"); + return; +} diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index ea70853da2..0756bbe8f1 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -238,7 +238,7 @@ int dm_pci_write_config(struct udevice *dev, int offset, unsigned long value, { struct udevice *bus; - for (bus = dev; device_get_uclass_id(bus->parent) == UCLASS_PCI;) + for (bus = dev; device_is_on_pci_bus(bus);) bus = bus->parent; return pci_bus_write_config(bus, pci_get_bdf(dev), offset, value, size); } @@ -303,7 +303,7 @@ int dm_pci_read_config(struct udevice *dev, int offset, unsigned long *valuep, { struct udevice *bus; - for (bus = dev; device_get_uclass_id(bus->parent) == UCLASS_PCI;) + for (bus = dev; device_is_on_pci_bus(bus);) bus = bus->parent; return pci_bus_read_config(bus, pci_get_bdf(dev), offset, valuep, size); diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index 41d5447f12..79f27c744b 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -185,6 +185,7 @@ void pciauto_setup_device(struct pci_controller *hose, #ifndef CONFIG_PCI_ENUM_ONLY /* Configure the expansion ROM address */ pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); + header_type &= 0x7f; if (header_type != PCI_HEADER_TYPE_CARDBUS) { rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ? PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1; diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index ca485ba90c..1568f20c1a 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -495,7 +495,7 @@ __weak int imx6_pcie_toggle_reset(void) * * The PCIe #PERST reset line _MUST_ be connected, otherwise your * design does not conform to the specification. You must wait at - * least 20 mS after de-asserting the #PERST so the EP device can + * least 20 ms after de-asserting the #PERST so the EP device can * do self-initialisation. * * In case your #PERST pin is connected to a plain GPIO pin of the @@ -506,7 +506,7 @@ __weak int imx6_pcie_toggle_reset(void) * In case your #PERST toggling logic is more complex, for example * connected via CPLD or somesuch, you can override this function * in your board file and implement reset logic as needed. You must - * not forget to wait at least 20 mS after de-asserting #PERST in + * not forget to wait at least 20 ms after de-asserting #PERST in * this case either though. * * In case your #PERST line of the PCIe EP device is not connected @@ -538,7 +538,7 @@ static int imx6_pcie_deassert_core_reset(void) /* * Wait for the clock to settle a bit, when the clock are sourced - * from the CPU, we need about 30mS to settle. + * from the CPU, we need about 30 ms to settle. */ mdelay(50); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index b8146df99b..3b6e3b7060 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -124,4 +124,6 @@ config PINCTRL_SANDBOX endif +source "drivers/pinctrl/uniphier/Kconfig" + endmenu diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index f537df4e88..e56a17f966 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -3,3 +3,5 @@ obj-$(CONFIG_$(SPL_)PINCTRL_GENERIC) += pinctrl-generic.o obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_PINCTRL_SANDBOX) += pinctrl-sandbox.o + +obj-$(CONFIG_ARCH_UNIPHIER) += uniphier/ diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c index 58001ef572..b5fdcd12a8 100644 --- a/drivers/pinctrl/pinctrl-uclass.c +++ b/drivers/pinctrl/pinctrl-uclass.c @@ -11,7 +11,6 @@ #include <dm/device.h> #include <dm/lists.h> #include <dm/pinctrl.h> -#include <dm/root.h> #include <dm/uclass.h> DECLARE_GLOBAL_DATA_PTR; @@ -160,8 +159,7 @@ static int pinctrl_select_state_full(struct udevice *dev, const char *statename) static int pinconfig_post_bind(struct udevice *dev) { - /* Scan the bus for devices */ - return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false); + return 0; } #endif @@ -249,10 +247,15 @@ static int pinctrl_post_bind(struct udevice *dev) } /* - * The pinctrl driver child nodes should be bound so that peripheral - * devices can easily search in parent devices during later DT-parsing. + * If set_state callback is set, we assume this pinctrl driver is the + * full implementation. In this case, its child nodes should be bound + * so that peripheral devices can easily search in parent devices + * during later DT-parsing. */ - return pinconfig_post_bind(dev); + if (ops->set_state) + return pinconfig_post_bind(dev); + + return 0; } UCLASS_DRIVER(pinctrl) = { diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3288.c b/drivers/pinctrl/rockchip/pinctrl_rk3288.c index 5205498b36..c432a008e7 100644 --- a/drivers/pinctrl/rockchip/pinctrl_rk3288.c +++ b/drivers/pinctrl/rockchip/pinctrl_rk3288.c @@ -17,6 +17,7 @@ #include <asm/arch/periph.h> #include <asm/arch/pmu_rk3288.h> #include <dm/pinctrl.h> +#include <dm/root.h> DECLARE_GLOBAL_DATA_PTR; @@ -415,6 +416,12 @@ static struct pinctrl_ops rk3288_pinctrl_ops = { .get_periph_id = rk3288_pinctrl_get_periph_id, }; +static int rk3288_pinctrl_bind(struct udevice *dev) +{ + /* scan child GPIO banks */ + return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false); +} + static int rk3288_pinctrl_probe(struct udevice *dev) { struct rk3288_pinctrl_priv *priv = dev_get_priv(dev); @@ -437,5 +444,6 @@ U_BOOT_DRIVER(pinctrl_rk3288) = { .of_match = rk3288_pinctrl_ids, .priv_auto_alloc_size = sizeof(struct rk3288_pinctrl_priv), .ops = &rk3288_pinctrl_ops, + .bind = rk3288_pinctrl_bind, .probe = rk3288_pinctrl_probe, }; diff --git a/drivers/pinctrl/uniphier/Kconfig b/drivers/pinctrl/uniphier/Kconfig new file mode 100644 index 0000000000..2ff616e946 --- /dev/null +++ b/drivers/pinctrl/uniphier/Kconfig @@ -0,0 +1,42 @@ +if ARCH_UNIPHIER + +config PINCTRL_UNIPHIER_CORE + bool + +config PINCTRL_UNIPHIER_PH1_LD4 + bool "UniPhier PH1-LD4 SoC pinctrl driver" + depends on ARCH_UNIPHIER_PH1_LD4 + default y + select PINCTRL_UNIPHIER_CORE + +config PINCTRL_UNIPHIER_PH1_PRO4 + bool "UniPhier PH1-Pro4 SoC pinctrl driver" + depends on ARCH_UNIPHIER_PH1_PRO4 + default y + select PINCTRL_UNIPHIER_CORE + +config PINCTRL_UNIPHIER_PH1_SLD8 + bool "UniPhier PH1-sLD8 SoC pinctrl driver" + depends on ARCH_UNIPHIER_PH1_SLD8 + default y + select PINCTRL_UNIPHIER_CORE + +config PINCTRL_UNIPHIER_PH1_PRO5 + bool "UniPhier PH1-Pro5 SoC pinctrl driver" + depends on ARCH_UNIPHIER_PH1_PRO5 + default y + select PINCTRL_UNIPHIER_CORE + +config PINCTRL_UNIPHIER_PROXSTREAM2 + bool "UniPhier ProXstream2 SoC pinctrl driver" + depends on ARCH_UNIPHIER_PROXSTREAM2 + default y + select PINCTRL_UNIPHIER_CORE + +config PINCTRL_UNIPHIER_PH1_LD6B + bool "UniPhier PH1-LD6b SoC pinctrl driver" + depends on ARCH_UNIPHIER_PH1_LD6B + default y + select PINCTRL_UNIPHIER_CORE + +endif diff --git a/drivers/pinctrl/uniphier/Makefile b/drivers/pinctrl/uniphier/Makefile new file mode 100644 index 0000000000..e215b10972 --- /dev/null +++ b/drivers/pinctrl/uniphier/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_PINCTRL_UNIPHIER_CORE) += pinctrl-uniphier-core.o + +obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o +obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o +obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o +obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_PRO5) += pinctrl-ph1-pro5.o +obj-$(CONFIG_PINCTRL_UNIPHIER_PROXSTREAM2) += pinctrl-proxstream2.o +obj-$(CONFIG_PINCTRL_UNIPHIER_PH1_LD6B) += pinctrl-ph1-ld6b.o diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c b/drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c new file mode 100644 index 0000000000..b3d47f0915 --- /dev/null +++ b/drivers/pinctrl/uniphier/pinctrl-ph1-ld4.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm/device.h> +#include <dm/pinctrl.h> + +#include "pinctrl-uniphier.h" + +static const struct uniphier_pinctrl_pin ph1_ld4_pins[] = { + UNIPHIER_PINCTRL_PIN(53, 0), + UNIPHIER_PINCTRL_PIN(54, 0), + UNIPHIER_PINCTRL_PIN(55, 0), + UNIPHIER_PINCTRL_PIN(56, 0), + UNIPHIER_PINCTRL_PIN(67, 0), + UNIPHIER_PINCTRL_PIN(68, 0), + UNIPHIER_PINCTRL_PIN(69, 0), + UNIPHIER_PINCTRL_PIN(70, 0), + UNIPHIER_PINCTRL_PIN(85, 0), + UNIPHIER_PINCTRL_PIN(88, 0), + UNIPHIER_PINCTRL_PIN(156, 0), +}; + +static const unsigned emmc_pins[] = {21, 22, 23, 24, 25, 26, 27}; +static const unsigned emmc_muxvals[] = {0, 1, 1, 1, 1, 1, 1}; +static const unsigned emmc_dat8_pins[] = {28, 29, 30, 31}; +static const unsigned emmc_dat8_muxvals[] = {1, 1, 1, 1}; +static const unsigned i2c0_pins[] = {102, 103}; +static const unsigned i2c0_muxvals[] = {0, 0}; +static const unsigned i2c1_pins[] = {104, 105}; +static const unsigned i2c1_muxvals[] = {0, 0}; +static const unsigned i2c2_pins[] = {108, 109}; +static const unsigned i2c2_muxvals[] = {2, 2}; +static const unsigned i2c3_pins[] = {108, 109}; +static const unsigned i2c3_muxvals[] = {3, 3}; +static const unsigned nand_pins[] = {24, 25, 26, 27, 28, 29, 30, 31, 158, 159, + 160, 161, 162, 163, 164}; +static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0}; +static const unsigned nand_cs1_pins[] = {22, 23}; +static const unsigned nand_cs1_muxvals[] = {0, 0}; +static const unsigned sd_pins[] = {44, 45, 46, 47, 48, 49, 50, 51, 52}; +static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned uart0_pins[] = {85, 88}; +static const unsigned uart0_muxvals[] = {1, 1}; +static const unsigned uart1_pins[] = {155, 156}; +static const unsigned uart1_muxvals[] = {13, 13}; +static const unsigned uart1b_pins[] = {69, 70}; +static const unsigned uart1b_muxvals[] = {23, 23}; +static const unsigned uart2_pins[] = {128, 129}; +static const unsigned uart2_muxvals[] = {13, 13}; +static const unsigned uart3_pins[] = {110, 111}; +static const unsigned uart3_muxvals[] = {1, 1}; +static const unsigned usb0_pins[] = {53, 54}; +static const unsigned usb0_muxvals[] = {0, 0}; +static const unsigned usb1_pins[] = {55, 56}; +static const unsigned usb1_muxvals[] = {0, 0}; +static const unsigned usb2_pins[] = {155, 156}; +static const unsigned usb2_muxvals[] = {4, 4}; +static const unsigned usb2b_pins[] = {67, 68}; +static const unsigned usb2b_muxvals[] = {23, 23}; + +static const struct uniphier_pinctrl_group ph1_ld4_groups[] = { + UNIPHIER_PINCTRL_GROUP(emmc), + UNIPHIER_PINCTRL_GROUP(emmc_dat8), + UNIPHIER_PINCTRL_GROUP(i2c0), + UNIPHIER_PINCTRL_GROUP(i2c1), + UNIPHIER_PINCTRL_GROUP(i2c2), + UNIPHIER_PINCTRL_GROUP(i2c3), + UNIPHIER_PINCTRL_GROUP(nand), + UNIPHIER_PINCTRL_GROUP(nand_cs1), + UNIPHIER_PINCTRL_GROUP(sd), + UNIPHIER_PINCTRL_GROUP(uart0), + UNIPHIER_PINCTRL_GROUP(uart1), + UNIPHIER_PINCTRL_GROUP(uart1b), + UNIPHIER_PINCTRL_GROUP(uart2), + UNIPHIER_PINCTRL_GROUP(uart3), + UNIPHIER_PINCTRL_GROUP(usb0), + UNIPHIER_PINCTRL_GROUP(usb1), + UNIPHIER_PINCTRL_GROUP(usb2), + UNIPHIER_PINCTRL_GROUP(usb2b), +}; + +static const char * const ph1_ld4_functions[] = { + "emmc", + "i2c0", + "i2c1", + "i2c2", + "i2c3", + "nand", + "sd", + "uart0", + "uart1", + "uart2", + "uart3", + "usb0", + "usb1", + "usb2", +}; + +static struct uniphier_pinctrl_socdata ph1_ld4_pinctrl_socdata = { + .pins = ph1_ld4_pins, + .pins_count = ARRAY_SIZE(ph1_ld4_pins), + .groups = ph1_ld4_groups, + .groups_count = ARRAY_SIZE(ph1_ld4_groups), + .functions = ph1_ld4_functions, + .functions_count = ARRAY_SIZE(ph1_ld4_functions), + .mux_bits = 8, + .reg_stride = 4, + .load_pinctrl = false, +}; + +static int ph1_ld4_pinctrl_probe(struct udevice *dev) +{ + return uniphier_pinctrl_probe(dev, &ph1_ld4_pinctrl_socdata); +} + +static const struct udevice_id ph1_ld4_pinctrl_match[] = { + { .compatible = "socionext,ph1-ld4-pinctrl" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(ph1_ld4_pinctrl) = { + .name = "ph1-ld4-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(ph1_ld4_pinctrl_match), + .probe = ph1_ld4_pinctrl_probe, + .remove = uniphier_pinctrl_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv), + .ops = &uniphier_pinctrl_ops, +}; diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-ld6b.c b/drivers/pinctrl/uniphier/pinctrl-ph1-ld6b.c new file mode 100644 index 0000000000..8703a215e4 --- /dev/null +++ b/drivers/pinctrl/uniphier/pinctrl-ph1-ld6b.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm/device.h> +#include <dm/pinctrl.h> + +#include "pinctrl-uniphier.h" + +static const struct uniphier_pinctrl_pin ph1_ld6b_pins[] = { + UNIPHIER_PINCTRL_PIN(113, 0), + UNIPHIER_PINCTRL_PIN(114, 0), + UNIPHIER_PINCTRL_PIN(115, 0), + UNIPHIER_PINCTRL_PIN(116, 0), + UNIPHIER_PINCTRL_PIN(217, 0), + UNIPHIER_PINCTRL_PIN(218, 0), + UNIPHIER_PINCTRL_PIN(219, 0), + UNIPHIER_PINCTRL_PIN(220, 0), +}; + +static const unsigned emmc_pins[] = {36, 37, 38, 39, 40, 41, 42}; +static const unsigned emmc_muxvals[] = {1, 1, 1, 1, 1, 1, 1}; +static const unsigned emmc_dat8_pins[] = {43, 44, 45, 46}; +static const unsigned emmc_dat8_muxvals[] = {1, 1, 1, 1}; +static const unsigned i2c0_pins[] = {109, 110}; +static const unsigned i2c0_muxvals[] = {0, 0}; +static const unsigned i2c1_pins[] = {111, 112}; +static const unsigned i2c1_muxvals[] = {0, 0}; +static const unsigned i2c2_pins[] = {115, 116}; +static const unsigned i2c2_muxvals[] = {1, 1}; +static const unsigned i2c3_pins[] = {118, 119}; +static const unsigned i2c3_muxvals[] = {1, 1}; +static const unsigned nand_pins[] = {30, 31, 32, 33, 34, 35, 36, 39, 40, 41, + 42, 43, 44, 45, 46}; +static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0}; +static const unsigned nand_cs1_pins[] = {37, 38}; +static const unsigned nand_cs1_muxvals[] = {0, 0}; +static const unsigned sd_pins[] = {47, 48, 49, 50, 51, 52, 53, 54, 55}; +static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned uart0_pins[] = {135, 136}; +static const unsigned uart0_muxvals[] = {3, 3}; +static const unsigned uart0b_pins[] = {11, 12}; +static const unsigned uart0b_muxvals[] = {2, 2}; +static const unsigned uart1_pins[] = {115, 116}; +static const unsigned uart1_muxvals[] = {0, 0}; +static const unsigned uart1b_pins[] = {113, 114}; +static const unsigned uart1b_muxvals[] = {1, 1}; +static const unsigned uart2_pins[] = {113, 114}; +static const unsigned uart2_muxvals[] = {2, 2}; +static const unsigned uart2b_pins[] = {86, 87}; +static const unsigned uart2b_muxvals[] = {1, 1}; +static const unsigned usb0_pins[] = {56, 57}; +static const unsigned usb0_muxvals[] = {0, 0}; +static const unsigned usb1_pins[] = {58, 59}; +static const unsigned usb1_muxvals[] = {0, 0}; +static const unsigned usb2_pins[] = {60, 61}; +static const unsigned usb2_muxvals[] = {0, 0}; +static const unsigned usb3_pins[] = {62, 63}; +static const unsigned usb3_muxvals[] = {0, 0}; + +static const struct uniphier_pinctrl_group ph1_ld6b_groups[] = { + UNIPHIER_PINCTRL_GROUP(emmc), + UNIPHIER_PINCTRL_GROUP(emmc_dat8), + UNIPHIER_PINCTRL_GROUP(i2c0), + UNIPHIER_PINCTRL_GROUP(i2c1), + UNIPHIER_PINCTRL_GROUP(i2c2), + UNIPHIER_PINCTRL_GROUP(i2c3), + UNIPHIER_PINCTRL_GROUP(nand), + UNIPHIER_PINCTRL_GROUP(nand_cs1), + UNIPHIER_PINCTRL_GROUP(sd), + UNIPHIER_PINCTRL_GROUP(uart0), + UNIPHIER_PINCTRL_GROUP(uart0b), + UNIPHIER_PINCTRL_GROUP(uart1), + UNIPHIER_PINCTRL_GROUP(uart1b), + UNIPHIER_PINCTRL_GROUP(uart2), + UNIPHIER_PINCTRL_GROUP(uart2b), + UNIPHIER_PINCTRL_GROUP(usb0), + UNIPHIER_PINCTRL_GROUP(usb1), + UNIPHIER_PINCTRL_GROUP(usb2), + UNIPHIER_PINCTRL_GROUP(usb3), +}; + +static const char * const ph1_ld6b_functions[] = { + "emmc", + "i2c0", + "i2c1", + "i2c2", + "i2c3", + "nand", + "sd", + "uart0", + "uart1", + "uart2", + "usb0", + "usb1", + "usb2", + "usb3", +}; + +static struct uniphier_pinctrl_socdata ph1_ld6b_pinctrl_socdata = { + .pins = ph1_ld6b_pins, + .pins_count = ARRAY_SIZE(ph1_ld6b_pins), + .groups = ph1_ld6b_groups, + .groups_count = ARRAY_SIZE(ph1_ld6b_groups), + .functions = ph1_ld6b_functions, + .functions_count = ARRAY_SIZE(ph1_ld6b_functions), + .mux_bits = 8, + .reg_stride = 4, + .load_pinctrl = false, +}; + +static int ph1_ld6b_pinctrl_probe(struct udevice *dev) +{ + return uniphier_pinctrl_probe(dev, &ph1_ld6b_pinctrl_socdata); +} + +static const struct udevice_id ph1_ld6b_pinctrl_match[] = { + { .compatible = "socionext,ph1-ld6b-pinctrl" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(ph1_ld6b_pinctrl) = { + .name = "ph1-ld6b-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(ph1_ld6b_pinctrl_match), + .probe = ph1_ld6b_pinctrl_probe, + .remove = uniphier_pinctrl_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv), + .ops = &uniphier_pinctrl_ops, +}; diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-pro4.c b/drivers/pinctrl/uniphier/pinctrl-ph1-pro4.c new file mode 100644 index 0000000000..b3eaf138f7 --- /dev/null +++ b/drivers/pinctrl/uniphier/pinctrl-ph1-pro4.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm/device.h> +#include <dm/pinctrl.h> + +#include "pinctrl-uniphier.h" + +static const struct uniphier_pinctrl_pin ph1_pro4_pins[] = { +}; + +static const unsigned emmc_pins[] = {40, 41, 42, 43, 51, 52, 53}; +static const unsigned emmc_muxvals[] = {1, 1, 1, 1, 1, 1, 1}; +static const unsigned emmc_dat8_pins[] = {44, 45, 46, 47}; +static const unsigned emmc_dat8_muxvals[] = {1, 1, 1, 1}; +static const unsigned i2c0_pins[] = {142, 143}; +static const unsigned i2c0_muxvals[] = {0, 0}; +static const unsigned i2c1_pins[] = {144, 145}; +static const unsigned i2c1_muxvals[] = {0, 0}; +static const unsigned i2c2_pins[] = {146, 147}; +static const unsigned i2c2_muxvals[] = {0, 0}; +static const unsigned i2c3_pins[] = {148, 149}; +static const unsigned i2c3_muxvals[] = {0, 0}; +static const unsigned i2c6_pins[] = {308, 309}; +static const unsigned i2c6_muxvals[] = {6, 6}; +static const unsigned nand_pins[] = {40, 41, 42, 43, 44, 45, 46, 47, 48, 49, + 50, 51, 52, 53, 54}; +static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0}; +static const unsigned nand_cs1_pins[] = {131, 132}; +static const unsigned nand_cs1_muxvals[] = {1, 1}; +static const unsigned sd_pins[] = {150, 151, 152, 153, 154, 155, 156, 157, 158}; +static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned sd1_pins[] = {319, 320, 321, 322, 323, 324, 325, 326, + 327}; +static const unsigned sd1_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned uart0_pins[] = {127, 128}; +static const unsigned uart0_muxvals[] = {0, 0}; +static const unsigned uart1_pins[] = {129, 130}; +static const unsigned uart1_muxvals[] = {0, 0}; +static const unsigned uart2_pins[] = {131, 132}; +static const unsigned uart2_muxvals[] = {0, 0}; +static const unsigned uart3_pins[] = {88, 89}; +static const unsigned uart3_muxvals[] = {2, 2}; +static const unsigned usb0_pins[] = {180, 181}; +static const unsigned usb0_muxvals[] = {0, 0}; +static const unsigned usb1_pins[] = {182, 183}; +static const unsigned usb1_muxvals[] = {0, 0}; +static const unsigned usb2_pins[] = {184, 185}; +static const unsigned usb2_muxvals[] = {0, 0}; +static const unsigned usb3_pins[] = {186, 187}; +static const unsigned usb3_muxvals[] = {0, 0}; + +static const struct uniphier_pinctrl_group ph1_pro4_groups[] = { + UNIPHIER_PINCTRL_GROUP(emmc), + UNIPHIER_PINCTRL_GROUP(emmc_dat8), + UNIPHIER_PINCTRL_GROUP(i2c0), + UNIPHIER_PINCTRL_GROUP(i2c1), + UNIPHIER_PINCTRL_GROUP(i2c2), + UNIPHIER_PINCTRL_GROUP(i2c3), + UNIPHIER_PINCTRL_GROUP(i2c6), + UNIPHIER_PINCTRL_GROUP(nand), + UNIPHIER_PINCTRL_GROUP(nand_cs1), + UNIPHIER_PINCTRL_GROUP(sd), + UNIPHIER_PINCTRL_GROUP(sd1), + UNIPHIER_PINCTRL_GROUP(uart0), + UNIPHIER_PINCTRL_GROUP(uart1), + UNIPHIER_PINCTRL_GROUP(uart2), + UNIPHIER_PINCTRL_GROUP(uart3), + UNIPHIER_PINCTRL_GROUP(usb0), + UNIPHIER_PINCTRL_GROUP(usb1), + UNIPHIER_PINCTRL_GROUP(usb2), + UNIPHIER_PINCTRL_GROUP(usb3), +}; + +static const char * const ph1_pro4_functions[] = { + "emmc", + "i2c0", + "i2c1", + "i2c2", + "i2c3", + "i2c6", + "nand", + "sd", + "sd1", + "uart0", + "uart1", + "uart2", + "uart3", + "usb0", + "usb1", + "usb2", + "usb3", +}; + +static struct uniphier_pinctrl_socdata ph1_pro4_pinctrl_socdata = { + .pins = ph1_pro4_pins, + .pins_count = ARRAY_SIZE(ph1_pro4_pins), + .groups = ph1_pro4_groups, + .groups_count = ARRAY_SIZE(ph1_pro4_groups), + .functions = ph1_pro4_functions, + .functions_count = ARRAY_SIZE(ph1_pro4_functions), + .mux_bits = 4, + .reg_stride = 8, + .load_pinctrl = true, +}; + +static int ph1_pro4_pinctrl_probe(struct udevice *dev) +{ + return uniphier_pinctrl_probe(dev, &ph1_pro4_pinctrl_socdata); +} + +static const struct udevice_id ph1_pro4_pinctrl_match[] = { + { .compatible = "socionext,ph1-pro4-pinctrl" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(ph1_pro4_pinctrl) = { + .name = "ph1-pro4-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(ph1_pro4_pinctrl_match), + .probe = ph1_pro4_pinctrl_probe, + .remove = uniphier_pinctrl_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv), + .ops = &uniphier_pinctrl_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-pro5.c b/drivers/pinctrl/uniphier/pinctrl-ph1-pro5.c new file mode 100644 index 0000000000..3749250066 --- /dev/null +++ b/drivers/pinctrl/uniphier/pinctrl-ph1-pro5.c @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm/device.h> +#include <dm/pinctrl.h> + +#include "pinctrl-uniphier.h" + +static const struct uniphier_pinctrl_pin ph1_pro5_pins[] = { + UNIPHIER_PINCTRL_PIN(47, 0), + UNIPHIER_PINCTRL_PIN(48, 0), + UNIPHIER_PINCTRL_PIN(49, 0), + UNIPHIER_PINCTRL_PIN(50, 0), + UNIPHIER_PINCTRL_PIN(53, 0), + UNIPHIER_PINCTRL_PIN(54, 0), + UNIPHIER_PINCTRL_PIN(87, 0), + UNIPHIER_PINCTRL_PIN(88, 0), + UNIPHIER_PINCTRL_PIN(101, 0), + UNIPHIER_PINCTRL_PIN(102, 0), +}; + +static const unsigned emmc_pins[] = {36, 37, 38, 39, 40, 41, 42}; +static const unsigned emmc_muxvals[] = {0, 0, 0, 0, 0, 0, 0}; +static const unsigned emmc_dat8_pins[] = {43, 44, 45, 46}; +static const unsigned emmc_dat8_muxvals[] = {0, 0, 0, 0}; +static const unsigned i2c0_pins[] = {112, 113}; +static const unsigned i2c0_muxvals[] = {0, 0}; +static const unsigned i2c1_pins[] = {114, 115}; +static const unsigned i2c1_muxvals[] = {0, 0}; +static const unsigned i2c2_pins[] = {116, 117}; +static const unsigned i2c2_muxvals[] = {0, 0}; +static const unsigned i2c3_pins[] = {118, 119}; +static const unsigned i2c3_muxvals[] = {0, 0}; +static const unsigned i2c5_pins[] = {87, 88}; +static const unsigned i2c5_muxvals[] = {2, 2}; +static const unsigned i2c5b_pins[] = {196, 197}; +static const unsigned i2c5b_muxvals[] = {2, 2}; +static const unsigned i2c5c_pins[] = {215, 216}; +static const unsigned i2c5c_muxvals[] = {2, 2}; +static const unsigned i2c6_pins[] = {101, 102}; +static const unsigned i2c6_muxvals[] = {2, 2}; +static const unsigned nand_pins[] = {19, 20, 21, 22, 23, 24, 25, 28, 29, 30, + 31, 32, 33, 34, 35}; +static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0}; +static const unsigned nand_cs1_pins[] = {26, 27}; +static const unsigned nand_cs1_muxvals[] = {0, 0}; +static const unsigned sd_pins[] = {250, 251, 252, 253, 254, 255, 256, 257, 258}; +static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned uart0_pins[] = {47, 48}; +static const unsigned uart0_muxvals[] = {0, 0}; +static const unsigned uart0b_pins[] = {227, 228}; +static const unsigned uart0b_muxvals[] = {3, 3}; +static const unsigned uart1_pins[] = {49, 50}; +static const unsigned uart1_muxvals[] = {0, 0}; +static const unsigned uart2_pins[] = {51, 52}; +static const unsigned uart2_muxvals[] = {0, 0}; +static const unsigned uart3_pins[] = {53, 54}; +static const unsigned uart3_muxvals[] = {0, 0}; +static const unsigned usb0_pins[] = {124, 125}; +static const unsigned usb0_muxvals[] = {0, 0}; +static const unsigned usb1_pins[] = {126, 127}; +static const unsigned usb1_muxvals[] = {0, 0}; +static const unsigned usb2_pins[] = {128, 129}; +static const unsigned usb2_muxvals[] = {0, 0}; + +static const struct uniphier_pinctrl_group ph1_pro5_groups[] = { + UNIPHIER_PINCTRL_GROUP(emmc), + UNIPHIER_PINCTRL_GROUP(emmc_dat8), + UNIPHIER_PINCTRL_GROUP(i2c0), + UNIPHIER_PINCTRL_GROUP(i2c1), + UNIPHIER_PINCTRL_GROUP(i2c2), + UNIPHIER_PINCTRL_GROUP(i2c3), + UNIPHIER_PINCTRL_GROUP(i2c5), + UNIPHIER_PINCTRL_GROUP(i2c5b), + UNIPHIER_PINCTRL_GROUP(i2c5c), + UNIPHIER_PINCTRL_GROUP(i2c6), + UNIPHIER_PINCTRL_GROUP(nand), + UNIPHIER_PINCTRL_GROUP(nand_cs1), + UNIPHIER_PINCTRL_GROUP(sd), + UNIPHIER_PINCTRL_GROUP(uart0), + UNIPHIER_PINCTRL_GROUP(uart0b), + UNIPHIER_PINCTRL_GROUP(uart1), + UNIPHIER_PINCTRL_GROUP(uart2), + UNIPHIER_PINCTRL_GROUP(uart3), + UNIPHIER_PINCTRL_GROUP(usb0), + UNIPHIER_PINCTRL_GROUP(usb1), + UNIPHIER_PINCTRL_GROUP(usb2), +}; + +static const char * const ph1_pro5_functions[] = { + "emmc", + "i2c0", + "i2c1", + "i2c2", + "i2c3", + "i2c5", + "i2c6", + "nand", + "sd", + "uart0", + "uart1", + "uart2", + "uart3", + "usb0", + "usb1", + "usb2", +}; + +static struct uniphier_pinctrl_socdata ph1_pro5_pinctrl_socdata = { + .pins = ph1_pro5_pins, + .pins_count = ARRAY_SIZE(ph1_pro5_pins), + .groups = ph1_pro5_groups, + .groups_count = ARRAY_SIZE(ph1_pro5_groups), + .functions = ph1_pro5_functions, + .functions_count = ARRAY_SIZE(ph1_pro5_functions), + .mux_bits = 4, + .reg_stride = 8, + .load_pinctrl = true, +}; + +static int ph1_pro5_pinctrl_probe(struct udevice *dev) +{ + return uniphier_pinctrl_probe(dev, &ph1_pro5_pinctrl_socdata); +} + +static const struct udevice_id ph1_pro5_pinctrl_match[] = { + { .compatible = "socionext,ph1-pro5-pinctrl" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(ph1_pro5_pinctrl) = { + .name = "ph1-pro5-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(ph1_pro5_pinctrl_match), + .probe = ph1_pro5_pinctrl_probe, + .remove = uniphier_pinctrl_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv), + .ops = &uniphier_pinctrl_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c b/drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c new file mode 100644 index 0000000000..5fafdb6100 --- /dev/null +++ b/drivers/pinctrl/uniphier/pinctrl-ph1-sld8.c @@ -0,0 +1,141 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm/device.h> +#include <dm/pinctrl.h> + +#include "pinctrl-uniphier.h" + +static const struct uniphier_pinctrl_pin ph1_sld8_pins[] = { + UNIPHIER_PINCTRL_PIN(32, 8), + UNIPHIER_PINCTRL_PIN(33, 8), + UNIPHIER_PINCTRL_PIN(34, 8), + UNIPHIER_PINCTRL_PIN(35, 8), + UNIPHIER_PINCTRL_PIN(36, 8), + UNIPHIER_PINCTRL_PIN(37, 8), + UNIPHIER_PINCTRL_PIN(38, 8), + UNIPHIER_PINCTRL_PIN(39, 8), + UNIPHIER_PINCTRL_PIN(40, 9), + UNIPHIER_PINCTRL_PIN(41, 0), + UNIPHIER_PINCTRL_PIN(42, 0), + UNIPHIER_PINCTRL_PIN(43, 0), + UNIPHIER_PINCTRL_PIN(44, 0), + UNIPHIER_PINCTRL_PIN(70, 0), + UNIPHIER_PINCTRL_PIN(71, 0), + UNIPHIER_PINCTRL_PIN(102, 10), + UNIPHIER_PINCTRL_PIN(103, 10), + UNIPHIER_PINCTRL_PIN(104, 11), + UNIPHIER_PINCTRL_PIN(105, 11), + UNIPHIER_PINCTRL_PIN(108, 13), + UNIPHIER_PINCTRL_PIN(109, 13), + UNIPHIER_PINCTRL_PIN(112, 0), + UNIPHIER_PINCTRL_PIN(113, 0), + UNIPHIER_PINCTRL_PIN(114, 0), + UNIPHIER_PINCTRL_PIN(115, 0), +}; + +static const unsigned emmc_pins[] = {21, 22, 23, 24, 25, 26, 27}; +static const unsigned emmc_muxvals[] = {1, 1, 1, 1, 1, 1, 1}; +static const unsigned emmc_dat8_pins[] = {28, 29, 30, 31}; +static const unsigned emmc_dat8_muxvals[] = {1, 1, 1, 1}; +static const unsigned i2c0_pins[] = {102, 103}; +static const unsigned i2c0_muxvals[] = {0, 0}; +static const unsigned i2c1_pins[] = {104, 105}; +static const unsigned i2c1_muxvals[] = {0, 0}; +static const unsigned i2c2_pins[] = {108, 109}; +static const unsigned i2c2_muxvals[] = {2, 2}; +static const unsigned i2c3_pins[] = {108, 109}; +static const unsigned i2c3_muxvals[] = {3, 3}; +static const unsigned nand_pins[] = {15, 16, 17, 18, 19, 20, 21, 24, 25, 26, + 27, 28, 29, 30, 31}; +static const unsigned nand_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0}; +static const unsigned nand_cs1_pins[] = {22, 23}; +static const unsigned nand_cs1_muxvals[] = {0, 0}; +static const unsigned sd_pins[] = {32, 33, 34, 35, 36, 37, 38, 39, 40}; +static const unsigned sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0}; +static const unsigned uart0_pins[] = {70, 71}; +static const unsigned uart0_muxvals[] = {3, 3}; +static const unsigned uart1_pins[] = {114, 115}; +static const unsigned uart1_muxvals[] = {0, 0}; +static const unsigned uart2_pins[] = {112, 113}; +static const unsigned uart2_muxvals[] = {1, 1}; +static const unsigned uart3_pins[] = {110, 111}; +static const unsigned uart3_muxvals[] = {1, 1}; +static const unsigned usb0_pins[] = {41, 42}; +static const unsigned usb0_muxvals[] = {0, 0}; +static const unsigned usb1_pins[] = {43, 44}; +static const unsigned usb1_muxvals[] = {0, 0}; +static const unsigned usb2_pins[] = {114, 115}; +static const unsigned usb2_muxvals[] = {1, 1}; + +static const struct uniphier_pinctrl_group ph1_sld8_groups[] = { + UNIPHIER_PINCTRL_GROUP(emmc), + UNIPHIER_PINCTRL_GROUP(emmc_dat8), + UNIPHIER_PINCTRL_GROUP(i2c0), + UNIPHIER_PINCTRL_GROUP(i2c1), + UNIPHIER_PINCTRL_GROUP(i2c2), + UNIPHIER_PINCTRL_GROUP(i2c3), + UNIPHIER_PINCTRL_GROUP(nand), + UNIPHIER_PINCTRL_GROUP(nand_cs1), + UNIPHIER_PINCTRL_GROUP(sd), + UNIPHIER_PINCTRL_GROUP(uart0), + UNIPHIER_PINCTRL_GROUP(uart1), + UNIPHIER_PINCTRL_GROUP(uart2), + UNIPHIER_PINCTRL_GROUP(uart3), + UNIPHIER_PINCTRL_GROUP(usb0), + UNIPHIER_PINCTRL_GROUP(usb1), + UNIPHIER_PINCTRL_GROUP(usb2), +}; + +static const char * const ph1_sld8_functions[] = { + "emmc", + "i2c0", + "i2c1", + "i2c2", + "i2c3", + "nand", + "sd", + "uart0", + "uart1", + "uart2", + "uart3", + "usb0", + "usb1", + "usb2", +}; + +static struct uniphier_pinctrl_socdata ph1_sld8_pinctrl_socdata = { + .pins = ph1_sld8_pins, + .pins_count = ARRAY_SIZE(ph1_sld8_pins), + .groups = ph1_sld8_groups, + .groups_count = ARRAY_SIZE(ph1_sld8_groups), + .functions = ph1_sld8_functions, + .functions_count = ARRAY_SIZE(ph1_sld8_functions), + .mux_bits = 8, + .reg_stride = 4, + .load_pinctrl = false, +}; + +static int ph1_sld8_pinctrl_probe(struct udevice *dev) +{ + return uniphier_pinctrl_probe(dev, &ph1_sld8_pinctrl_socdata); +} + +static const struct udevice_id ph1_sld8_pinctrl_match[] = { + { .compatible = "socionext,ph1-sld8-pinctrl" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(ph1_sld8_pinctrl) = { + .name = "ph1-sld8-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(ph1_sld8_pinctrl_match), + .probe = ph1_sld8_pinctrl_probe, + .remove = uniphier_pinctrl_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv), + .ops = &uniphier_pinctrl_ops, +}; diff --git a/drivers/pinctrl/uniphier/pinctrl-proxstream2.c b/drivers/pinctrl/uniphier/pinctrl-proxstream2.c new file mode 100644 index 0000000000..2cca69d514 --- /dev/null +++ b/drivers/pinctrl/uniphier/pinctrl-proxstream2.c @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm/device.h> +#include <dm/pinctrl.h> + +#include "pinctrl-uniphier.h" + +static const struct uniphier_pinctrl_pin proxstream2_pins[] = { + UNIPHIER_PINCTRL_PIN(113, 0), + UNIPHIER_PINCTRL_PIN(114, 0), + UNIPHIER_PINCTRL_PIN(115, 0), + UNIPHIER_PINCTRL_PIN(116, 0), +}; + +static const unsigned emmc_pins[] = {36, 37, 38, 39, 40, 41, 42}; +static const unsigned emmc_muxvals[] = {9, 9, 9, 9, 9, 9, 9}; +static const unsigned emmc_dat8_pins[] = {43, 44, 45, 46}; +static const unsigned emmc_dat8_muxvals[] = {9, 9, 9, 9}; +static const unsigned i2c0_pins[] = {109, 110}; +static const unsigned i2c0_muxvals[] = {8, 8}; +static const unsigned i2c1_pins[] = {111, 112}; +static const unsigned i2c1_muxvals[] = {8, 8}; +static const unsigned i2c2_pins[] = {171, 172}; +static const unsigned i2c2_muxvals[] = {8, 8}; +static const unsigned i2c3_pins[] = {159, 160}; +static const unsigned i2c3_muxvals[] = {8, 8}; +static const unsigned i2c5_pins[] = {183, 184}; +static const unsigned i2c5_muxvals[] = {11, 11}; +static const unsigned i2c6_pins[] = {185, 186}; +static const unsigned i2c6_muxvals[] = {11, 11}; +static const unsigned nand_pins[] = {30, 31, 32, 33, 34, 35, 36, 39, 40, 41, + 42, 43, 44, 45, 46}; +static const unsigned nand_muxvals[] = {8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, + 8, 8}; +static const unsigned nand_cs1_pins[] = {37, 38}; +static const unsigned nand_cs1_muxvals[] = {8, 8}; +static const unsigned sd_pins[] = {47, 48, 49, 50, 51, 52, 53, 54, 55}; +static const unsigned sd_muxvals[] = {8, 8, 8, 8, 8, 8, 8, 8, 8}; +static const unsigned uart0_pins[] = {217, 218}; +static const unsigned uart0_muxvals[] = {8, 8}; +static const unsigned uart0b_pins[] = {179, 180}; +static const unsigned uart0b_muxvals[] = {10, 10}; +static const unsigned uart1_pins[] = {115, 116}; +static const unsigned uart1_muxvals[] = {8, 8}; +static const unsigned uart2_pins[] = {113, 114}; +static const unsigned uart2_muxvals[] = {8, 8}; +static const unsigned uart3_pins[] = {219, 220}; +static const unsigned uart3_muxvals[] = {8, 8}; +static const unsigned uart3b_pins[] = {181, 182}; +static const unsigned uart3b_muxvals[] = {10, 10}; +static const unsigned usb0_pins[] = {56, 57}; +static const unsigned usb0_muxvals[] = {8, 8}; +static const unsigned usb1_pins[] = {58, 59}; +static const unsigned usb1_muxvals[] = {8, 8}; +static const unsigned usb2_pins[] = {60, 61}; +static const unsigned usb2_muxvals[] = {8, 8}; +static const unsigned usb3_pins[] = {62, 63}; +static const unsigned usb3_muxvals[] = {8, 8}; + +static const struct uniphier_pinctrl_group proxstream2_groups[] = { + UNIPHIER_PINCTRL_GROUP(emmc), + UNIPHIER_PINCTRL_GROUP(emmc_dat8), + UNIPHIER_PINCTRL_GROUP(i2c0), + UNIPHIER_PINCTRL_GROUP(i2c1), + UNIPHIER_PINCTRL_GROUP(i2c2), + UNIPHIER_PINCTRL_GROUP(i2c3), + UNIPHIER_PINCTRL_GROUP(i2c5), + UNIPHIER_PINCTRL_GROUP(i2c6), + UNIPHIER_PINCTRL_GROUP(nand), + UNIPHIER_PINCTRL_GROUP(nand_cs1), + UNIPHIER_PINCTRL_GROUP(sd), + UNIPHIER_PINCTRL_GROUP(uart0), + UNIPHIER_PINCTRL_GROUP(uart0b), + UNIPHIER_PINCTRL_GROUP(uart1), + UNIPHIER_PINCTRL_GROUP(uart2), + UNIPHIER_PINCTRL_GROUP(uart3), + UNIPHIER_PINCTRL_GROUP(uart3b), + UNIPHIER_PINCTRL_GROUP(usb0), + UNIPHIER_PINCTRL_GROUP(usb1), + UNIPHIER_PINCTRL_GROUP(usb2), + UNIPHIER_PINCTRL_GROUP(usb3), +}; + +static const char * const proxstream2_functions[] = { + "emmc", + "i2c0", + "i2c1", + "i2c2", + "i2c3", + "i2c5", + "i2c6", + "nand", + "sd", + "uart0", + "uart0b", + "uart1", + "uart2", + "uart3", + "uart3b", + "usb0", + "usb1", + "usb2", + "usb3", +}; + +static struct uniphier_pinctrl_socdata proxstream2_pinctrl_socdata = { + .pins = proxstream2_pins, + .pins_count = ARRAY_SIZE(proxstream2_pins), + .groups = proxstream2_groups, + .groups_count = ARRAY_SIZE(proxstream2_groups), + .functions = proxstream2_functions, + .functions_count = ARRAY_SIZE(proxstream2_functions), + .mux_bits = 8, + .reg_stride = 4, + .load_pinctrl = false, +}; + +static int proxstream2_pinctrl_probe(struct udevice *dev) +{ + return uniphier_pinctrl_probe(dev, &proxstream2_pinctrl_socdata); +} + +static const struct udevice_id proxstream2_pinctrl_match[] = { + { .compatible = "socionext,proxstream2-pinctrl" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(proxstream2_pinctrl) = { + .name = "proxstream2-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(proxstream2_pinctrl_match), + .probe = proxstream2_pinctrl_probe, + .remove = uniphier_pinctrl_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_pinctrl_priv), + .ops = &uniphier_pinctrl_ops, +}; diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c new file mode 100644 index 0000000000..37a920ca8b --- /dev/null +++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c @@ -0,0 +1,154 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <mapmem.h> +#include <linux/io.h> +#include <linux/err.h> +#include <dm/device.h> +#include <dm/pinctrl.h> + +#include "pinctrl-uniphier.h" + +DECLARE_GLOBAL_DATA_PTR; + +static int uniphier_pinctrl_get_groups_count(struct udevice *dev) +{ + struct uniphier_pinctrl_priv *priv = dev_get_priv(dev); + + return priv->socdata->groups_count; +} + +static const char *uniphier_pinctrl_get_group_name(struct udevice *dev, + unsigned selector) +{ + struct uniphier_pinctrl_priv *priv = dev_get_priv(dev); + + return priv->socdata->groups[selector].name; +} + +static int uniphier_pinmux_get_functions_count(struct udevice *dev) +{ + struct uniphier_pinctrl_priv *priv = dev_get_priv(dev); + + return priv->socdata->functions_count; +} + +static const char *uniphier_pinmux_get_function_name(struct udevice *dev, + unsigned selector) +{ + struct uniphier_pinctrl_priv *priv = dev_get_priv(dev); + + return priv->socdata->functions[selector]; +} + +static void uniphier_pinconf_input_enable(struct udevice *dev, unsigned pin) +{ + struct uniphier_pinctrl_priv *priv = dev_get_priv(dev); + int pins_count = priv->socdata->pins_count; + const struct uniphier_pinctrl_pin *pins = priv->socdata->pins; + int i; + + for (i = 0; i < pins_count; i++) { + if (pins[i].number == pin) { + unsigned int iectrl; + u32 tmp; + + iectrl = uniphier_pin_get_iectrl(pins[i].data); + tmp = readl(priv->base + UNIPHIER_PINCTRL_IECTRL); + tmp |= 1 << iectrl; + writel(tmp, priv->base + UNIPHIER_PINCTRL_IECTRL); + } + } +} + +static void uniphier_pinmux_set_one(struct udevice *dev, unsigned pin, + unsigned muxval) +{ + struct uniphier_pinctrl_priv *priv = dev_get_priv(dev); + unsigned mux_bits = priv->socdata->mux_bits; + unsigned reg_stride = priv->socdata->reg_stride; + unsigned reg, reg_end, shift, mask; + u32 tmp; + + reg = UNIPHIER_PINCTRL_PINMUX_BASE + pin * mux_bits / 32 * reg_stride; + reg_end = reg + reg_stride; + shift = pin * mux_bits % 32; + mask = (1U << mux_bits) - 1; + + /* + * If reg_stride is greater than 4, the MSB of each pinsel shall be + * stored in the offset+4. + */ + for (; reg < reg_end; reg += 4) { + tmp = readl(priv->base + reg); + tmp &= ~(mask << shift); + tmp |= (mask & muxval) << shift; + writel(tmp, priv->base + reg); + + muxval >>= mux_bits; + } + + if (priv->socdata->load_pinctrl) + writel(1, priv->base + UNIPHIER_PINCTRL_LOAD_PINMUX); + + /* some pins need input-enabling */ + uniphier_pinconf_input_enable(dev, pin); +} + +static int uniphier_pinmux_group_set(struct udevice *dev, + unsigned group_selector, + unsigned func_selector) +{ + struct uniphier_pinctrl_priv *priv = dev_get_priv(dev); + const struct uniphier_pinctrl_group *grp = + &priv->socdata->groups[group_selector]; + int i; + + for (i = 0; i < grp->num_pins; i++) + uniphier_pinmux_set_one(dev, grp->pins[i], grp->muxvals[i]); + + return 0; +} + +const struct pinctrl_ops uniphier_pinctrl_ops = { + .get_groups_count = uniphier_pinctrl_get_groups_count, + .get_group_name = uniphier_pinctrl_get_group_name, + .get_functions_count = uniphier_pinmux_get_functions_count, + .get_function_name = uniphier_pinmux_get_function_name, + .pinmux_group_set = uniphier_pinmux_group_set, + .set_state = pinctrl_generic_set_state, +}; + +int uniphier_pinctrl_probe(struct udevice *dev, + struct uniphier_pinctrl_socdata *socdata) +{ + struct uniphier_pinctrl_priv *priv = dev_get_priv(dev); + fdt_addr_t addr; + fdt_size_t size; + + addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", + &size); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + priv->base = map_sysmem(addr, size); + if (!priv->base) + return -ENOMEM; + + priv->socdata = socdata; + + return 0; +} + +int uniphier_pinctrl_remove(struct udevice *dev) +{ + struct uniphier_pinctrl_priv *priv = dev_get_priv(dev); + + unmap_sysmem(priv->base); + + return 0; +} diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier.h b/drivers/pinctrl/uniphier/pinctrl-uniphier.h new file mode 100644 index 0000000000..7eaec6a702 --- /dev/null +++ b/drivers/pinctrl/uniphier/pinctrl-uniphier.h @@ -0,0 +1,113 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PINCTRL_UNIPHIER_H__ +#define __PINCTRL_UNIPHIER_H__ + +/* TODO: move this to include/linux/bug.h */ +#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) + +#include <linux/kernel.h> +#include <linux/types.h> + +#define UNIPHIER_PINCTRL_PINMUX_BASE 0x0 +#define UNIPHIER_PINCTRL_LOAD_PINMUX 0x700 +#define UNIPHIER_PINCTRL_IECTRL 0xd00 + +#define UNIPHIER_PIN_ATTR_PACKED(iectrl) (iectrl) + +static inline unsigned int uniphier_pin_get_iectrl(unsigned long data) +{ + return data; +} + +/** + * struct uniphier_pinctrl_pin - pin data for UniPhier SoC + * + * @number: pin number + * @data: additional per-pin data + */ +struct uniphier_pinctrl_pin { + unsigned number; + unsigned long data; +}; + +/** + * struct uniphier_pinctrl_group - pin group data for UniPhier SoC + * + * @name: pin group name + * @pins: array of pins that belong to the group + * @num_pins: number of pins in the group + * @muxvals: array of values to be set to pinmux registers + */ +struct uniphier_pinctrl_group { + const char *name; + const unsigned *pins; + unsigned num_pins; + const unsigned *muxvals; +}; + +/** + * struct uniphier_pinctrl_socdata - SoC data for UniPhier pin controller + * + * @pins: array of pin data + * @pins_count: number of pin data + * @groups: array of pin group data + * @groups_count: number of pin group data + * @functions: array of pinmux function names + * @functions_count: number of pinmux functions + * @mux_bits: bit width of each pinmux register + * @reg_stride: stride of pinmux register address + * @load_pinctrl: if true, LOAD_PINMUX register must be set to one for new + * values in pinmux registers to become really effective + */ +struct uniphier_pinctrl_socdata { + const struct uniphier_pinctrl_pin *pins; + int pins_count; + const struct uniphier_pinctrl_group *groups; + int groups_count; + const char * const *functions; + int functions_count; + unsigned mux_bits; + unsigned reg_stride; + bool load_pinctrl; +}; + +#define UNIPHIER_PINCTRL_PIN(a, b) \ +{ \ + .number = a, \ + .data = UNIPHIER_PIN_ATTR_PACKED(b), \ +} + +#define UNIPHIER_PINCTRL_GROUP(grp) \ + { \ + .name = #grp, \ + .pins = grp##_pins, \ + .num_pins = ARRAY_SIZE(grp##_pins), \ + .muxvals = grp##_muxvals + \ + BUILD_BUG_ON_ZERO(ARRAY_SIZE(grp##_pins) != \ + ARRAY_SIZE(grp##_muxvals)), \ + } + +/** + * struct uniphier_pinctrl_priv - private data for UniPhier pinctrl driver + * + * @base: base address of the pinctrl device + * @socdata: SoC specific data + */ +struct uniphier_pinctrl_priv { + void __iomem *base; + struct uniphier_pinctrl_socdata *socdata; +}; + +extern const struct pinctrl_ops uniphier_pinctrl_ops; + +int uniphier_pinctrl_probe(struct udevice *dev, + struct uniphier_pinctrl_socdata *socdata); + +int uniphier_pinctrl_remove(struct udevice *dev); + +#endif /* __PINCTRL_UNIPHIER_H__ */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index ccb80d2d1d..ddb725d326 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -111,7 +111,7 @@ config DEBUG_UART_SHIFT config ROCKCHIP_SERIAL bool "Rockchip on-chip UART support" - depends on ARCH_UNIPHIER && DM_SERIAL + depends on ARCH_ROCKCHIP && DM_SERIAL help Select this to enable a debug UART for Rockchip devices. This uses the ns16550 driver. You will need to #define CONFIG_SYS_NS16550 in diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index ecf3bc0240..3a5c1d0eaa 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -80,13 +80,6 @@ static int pl01x_generic_serial_init(struct pl01x_regs *regs, writel(0, ®s->pl010_cr); break; case TYPE_PL011: -#ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT - /* Empty RX fifo if necessary */ - if (readl(®s->pl011_cr) & UART_PL011_CR_UARTEN) { - while (!(readl(®s->fr) & UART_PL01x_FR_RXFE)) - readl(®s->dr); - } -#endif /* disable everything */ writel(0, ®s->pl011_cr); break; @@ -105,21 +98,6 @@ static int pl011_set_line_control(struct pl01x_regs *regs) * control register write */ lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN; -#ifdef CONFIG_PL011_SERIAL_RLCR - { - int i; - - /* - * Program receive line control register after waiting - * 10 bus cycles. Delay be writing to readonly register - * 10 times - */ - for (i = 0; i < 10; i++) - writel(lcr, ®s->fr); - - writel(lcr, ®s->pl011_rlcr); - } -#endif writel(lcr, ®s->pl011_lcrh); return 0; } diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h index 941e6eda4c..cbc2929435 100644 --- a/drivers/serial/serial_sh.h +++ b/drivers/serial/serial_sh.h @@ -226,7 +226,11 @@ struct uart_port { # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) -# define SCIF_ORER 0x0001 +# if defined(CONFIG_SCIF_A) +# define SCIF_ORER 0x0200 +# else +# define SCIF_ORER 0x0001 +# endif # define SCSCR_INIT(port) (port->clk_mode == EXT_CLK ? 0x32 : 0x30) /* TIE=0,RIE=0,TE=1,RE=1,REIE=0, */ #else @@ -306,7 +310,11 @@ struct uart_port { #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) # define SCIF_ERRORS (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) -# define SCIF_RFDC_MASK 0x003f +# if defined(CONFIG_SCIF_A) +# define SCIF_RFDC_MASK 0x007f +# else +# define SCIF_RFDC_MASK 0x001f +# endif #else # define SCIF_ERRORS (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) # define SCIF_RFDC_MASK 0x001f @@ -557,6 +565,25 @@ SCIF_FNS(SCFCR, 0x18, 16) SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCLSR, 0x24, 16) SCIF_FNS(DL, 0x00, 0) /* dummy */ +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) +/* SCIFA and SCIF register offsets and size */ +SCIx_FNS(SCSMR, 0, 0, 0x00, 16, 0, 0, 0x00, 16, 0, 0) +SCIx_FNS(SCBRR, 0, 0, 0x04, 8, 0, 0, 0x04, 8, 0, 0) +SCIx_FNS(SCSCR, 0, 0, 0x08, 16, 0, 0, 0x08, 16, 0, 0) +SCIx_FNS(SCxTDR, 0, 0, 0x20, 8, 0, 0, 0x0C, 8, 0, 0) +SCIx_FNS(SCxSR, 0, 0, 0x14, 16, 0, 0, 0x10, 16, 0, 0) +SCIx_FNS(SCxRDR, 0, 0, 0x24, 8, 0, 0, 0x14, 8, 0, 0) +SCIF_FNS(SCFCR, 0, 0, 0x18, 16) +SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) +SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) +SCIF_FNS(DL, 0, 0, 0x30, 16) +SCIF_FNS(CKS, 0, 0, 0x34, 16) +#if defined(CONFIG_SCIF_A) +SCIF_FNS(SCLSR, 0, 0, 0x14, 16) +#else +SCIF_FNS(SCLSR, 0, 0, 0x24, 16) +#endif #else /* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/ /* name off sz off sz off sz off sz off sz*/ @@ -594,14 +621,8 @@ SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) #endif SCIF_FNS(SCLSR, 0, 0, 0x24, 16) #endif -#if defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) -SCIF_FNS(DL, 0, 0, 0x30, 16) -SCIF_FNS(CKS, 0, 0, 0x34, 16) -#else SCIF_FNS(DL, 0, 0, 0x0, 0) /* dummy */ #endif -#endif #define sci_in(port, reg) sci_##reg##_in(port) #define sci_out(port, reg, value) sci_##reg##_out(port, value) @@ -743,7 +764,11 @@ static inline int scbrr_calc(struct uart_port *port, int bps, int clk) #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) #define DL_VALUE(bps, clk) (clk / bps / 16) /* External Clock */ -#define SCBRR_VALUE(bps, clk) (clk / bps / 32 - 1) /* Internal Clock */ + #if defined(CONFIG_SCIF_A) + #define SCBRR_VALUE(bps, clk) (clk / bps / 16 - 1) /* Internal Clock */ + #else + #define SCBRR_VALUE(bps, clk) (clk / bps / 32 - 1) /* Internal Clock */ + #endif #else /* Generic SH */ #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) #endif diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 0a036ccb00..0bd4f88926 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -15,8 +15,6 @@ #include <asm/io.h> #include <asm/arch/hardware.h> -#define BIT(x) (1 << (x)) - /* SPIGCR0 */ #define SPIGCR0_SPIENA_MASK 0x1 #define SPIGCR0_SPIRST_MASK 0x0 diff --git a/drivers/spi/ep93xx_spi.c b/drivers/spi/ep93xx_spi.c index 235557ea3c..cb682ddda4 100644 --- a/drivers/spi/ep93xx_spi.c +++ b/drivers/spi/ep93xx_spi.c @@ -16,8 +16,6 @@ #include <asm/arch/ep93xx.h> - -#define BIT(x) (1<<(x)) #define SSPBASE SPI_BASE #define SSPCR0 0x0000 diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index 2b9f395a97..627644b56b 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -12,6 +12,7 @@ #include <common.h> #include <malloc.h> +#include <memalign.h> #include <spi.h> #include <asm/errno.h> #include <asm/io.h> diff --git a/drivers/spi/tegra20_slink.c b/drivers/spi/tegra20_slink.c index fbb665b86f..144716fd91 100644 --- a/drivers/spi/tegra20_slink.c +++ b/drivers/spi/tegra20_slink.c @@ -36,6 +36,11 @@ DECLARE_GLOBAL_DATA_PTR; #define SLINK_CMD_ENB (1 << 31) #define SLINK_CMD_GO (1 << 30) #define SLINK_CMD_M_S (1 << 28) +#define SLINK_CMD_IDLE_SCLK_DRIVE_LOW (0 << 24) +#define SLINK_CMD_IDLE_SCLK_DRIVE_HIGH (1 << 24) +#define SLINK_CMD_IDLE_SCLK_PULL_LOW (2 << 24) +#define SLINK_CMD_IDLE_SCLK_PULL_HIGH (3 << 24) +#define SLINK_CMD_IDLE_SCLK_MASK (3 << 24) #define SLINK_CMD_CK_SDA (1 << 21) #define SLINK_CMD_CS_POL (1 << 13) #define SLINK_CMD_CS_VAL (1 << 12) @@ -331,6 +336,22 @@ static int tegra30_spi_set_speed(struct udevice *bus, uint speed) static int tegra30_spi_set_mode(struct udevice *bus, uint mode) { struct tegra30_spi_priv *priv = dev_get_priv(bus); + struct spi_regs *regs = priv->regs; + u32 reg; + + reg = readl(®s->command); + + /* Set CPOL and CPHA */ + reg &= ~(SLINK_CMD_IDLE_SCLK_MASK | SLINK_CMD_CK_SDA); + if (mode & SPI_CPHA) + reg |= SLINK_CMD_CK_SDA; + + if (mode & SPI_CPOL) + reg |= SLINK_CMD_IDLE_SCLK_DRIVE_HIGH; + else + reg |= SLINK_CMD_IDLE_SCLK_DRIVE_LOW; + + writel(reg, ®s->command); priv->mode = mode; debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode); diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 6c21acda57..8ccc5780c9 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -247,7 +247,7 @@ static int xilinx_spi_set_speed(struct udevice *bus, uint speed) priv->freq = speed; - debug("xilinx_spi_set_speed: regs=%p, mode=%d\n", priv->regs, + debug("xilinx_spi_set_speed: regs=%p, speed=%d\n", priv->regs, priv->freq); return 0; @@ -260,13 +260,13 @@ static int xilinx_spi_set_mode(struct udevice *bus, uint mode) uint32_t spicr; spicr = readl(®s->spicr); - if (priv->mode & SPI_LSB_FIRST) + if (mode & SPI_LSB_FIRST) spicr |= SPICR_LSB_FIRST; - if (priv->mode & SPI_CPHA) + if (mode & SPI_CPHA) spicr |= SPICR_CPHA; - if (priv->mode & SPI_CPOL) + if (mode & SPI_CPOL) spicr |= SPICR_CPOL; - if (priv->mode & SPI_LOOP) + if (mode & SPI_LOOP) spicr |= SPICR_LOOP; writel(spicr, ®s->spicr); diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c index 310fb69c8d..d370e495cd 100644 --- a/drivers/spi/zynq_spi.c +++ b/drivers/spi/zynq_spi.c @@ -272,7 +272,8 @@ static int zynq_spi_set_speed(struct udevice *bus, uint speed) writel(confr, ®s->cr); priv->freq = speed; - debug("zynq_spi_set_speed: regs=%p, mode=%d\n", priv->regs, priv->freq); + debug("zynq_spi_set_speed: regs=%p, speed=%d\n", + priv->regs, priv->freq); return 0; } @@ -287,9 +288,9 @@ static int zynq_spi_set_mode(struct udevice *bus, uint mode) confr = readl(®s->cr); confr &= ~(ZYNQ_SPI_CR_CPHA_MASK | ZYNQ_SPI_CR_CPOL_MASK); - if (priv->mode & SPI_CPHA) + if (mode & SPI_CPHA) confr |= ZYNQ_SPI_CR_CPHA_MASK; - if (priv->mode & SPI_CPOL) + if (mode & SPI_CPOL) confr |= ZYNQ_SPI_CR_CPOL_MASK; writel(confr, ®s->cr); diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 6d4cacdcf7..d768f5ef80 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -6,4 +6,4 @@ # obj-$(CONFIG_DM_THERMAL) += thermal-uclass.o -obj-$(CONFIG_IMX6_THERMAL) += imx_thermal.o +obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 3c6c9679f9..09a3c52680 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -25,6 +25,9 @@ #define FACTOR1 15976 #define FACTOR2 4297157 #define MEASURE_FREQ 327 +#define TEMPERATURE_MIN -40 +#define TEMPERATURE_HOT 85 +#define TEMPERATURE_MAX 125 #define TEMPSENSE0_TEMP_CNT_SHIFT 8 #define TEMPSENSE0_TEMP_CNT_MASK (0xfff << TEMPSENSE0_TEMP_CNT_SHIFT) @@ -41,6 +44,7 @@ struct thermal_data { int maxc; }; +#if defined(CONFIG_MX6) static int read_cpu_temperature(struct udevice *dev) { int temperature; @@ -123,6 +127,73 @@ static int read_cpu_temperature(struct udevice *dev) return temperature; } +#elif defined(CONFIG_MX7) +static int read_cpu_temperature(struct udevice *dev) +{ + unsigned int reg, tmp, start; + unsigned int raw_25c, te1; + int temperature; + unsigned int *priv = dev_get_priv(dev); + u32 fuse = *priv; + struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *) + ANATOP_BASE_ADDR; + /* + * fuse data layout: + * [31:21] sensor value @ 25C + * [20:18] hot temperature value + * [17:9] sensor value of room + * [8:0] sensor value of hot + */ + + raw_25c = fuse >> 21; + if (raw_25c == 0) + raw_25c = 25; + + te1 = (fuse >> 9) & 0x1ff; + + /* + * now we only use single measure, every time we read + * the temperature, we will power on/down anadig thermal + * module + */ + writel(TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_MASK, &ccm_anatop->tempsense1_clr); + writel(PMU_REF_REFTOP_SELFBIASOFF_MASK, &ccm_anatop->ref_set); + + /* write measure freq */ + reg = readl(&ccm_anatop->tempsense1); + reg &= ~TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ_MASK; + reg |= TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_FREQ(MEASURE_FREQ); + writel(reg, &ccm_anatop->tempsense1); + + writel(TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_MASK, &ccm_anatop->tempsense1_clr); + writel(TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK, &ccm_anatop->tempsense1_clr); + writel(TEMPMON_HW_ANADIG_TEMPSENSE1_MEASURE_TEMP_MASK, &ccm_anatop->tempsense1_set); + + start = get_timer(0); + /* Wait max 100ms */ + do { + /* + * Since we can not rely on finish bit, use 1ms delay to get + * temperature. From RM, 17us is enough to get data, but + * to gurantee to get the data, delay 100ms here. + */ + reg = readl(&ccm_anatop->tempsense1); + tmp = (reg & TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_MASK) + >> TEMPMON_HW_ANADIG_TEMPSENSE1_TEMP_VALUE_SHIFT; + } while (get_timer(0) < (start + 100)); + + writel(TEMPMON_HW_ANADIG_TEMPSENSE1_FINISHED_MASK, &ccm_anatop->tempsense1_clr); + + /* power down anatop thermal sensor */ + writel(TEMPMON_HW_ANADIG_TEMPSENSE1_POWER_DOWN_MASK, &ccm_anatop->tempsense1_set); + writel(PMU_REF_REFTOP_SELFBIASOFF_MASK, &ccm_anatop->ref_clr); + + /* Single point */ + temperature = tmp - (te1 - raw_25c); + + return temperature; +} +#endif int imx_thermal_get_temp(struct udevice *dev, int *temp) { @@ -130,6 +201,7 @@ int imx_thermal_get_temp(struct udevice *dev, int *temp) int cpu_tmp = 0; cpu_tmp = read_cpu_temperature(dev); + while (cpu_tmp >= priv->critical) { printf("CPU Temperature (%dC) too close to max (%dC)", cpu_tmp, priv->maxc); @@ -157,10 +229,20 @@ static int imx_thermal_probe(struct udevice *dev) /* Read Temperature calibration data fuse */ fuse_read(pdata->fuse_bank, pdata->fuse_word, &fuse); - /* Check for valid fuse */ - if (fuse == 0 || fuse == ~0) { - printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse); - return -EPERM; + if (is_soc_type(MXC_SOC_MX6)) { + /* Check for valid fuse */ + if (fuse == 0 || fuse == ~0) { + debug("CPU: Thermal invalid data, fuse: 0x%x\n", + fuse); + return -EPERM; + } + } else if (is_soc_type(MXC_SOC_MX7)) { + /* No Calibration data in FUSE? */ + if ((fuse & 0x3ffff) == 0) + return -EPERM; + /* We do not support 105C TE2 */ + if (((fuse & 0x1c0000) >> 18) == 0x6) + return -EPERM; } /* set critical cooling temp */ diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c index 8a43e7c27d..ad083cf8ae 100644 --- a/drivers/usb/eth/asix.c +++ b/drivers/usb/eth/asix.c @@ -10,6 +10,7 @@ #include <dm.h> #include <usb.h> #include <malloc.h> +#include <memalign.h> #include <linux/mii.h> #include "usb_ether.h" diff --git a/drivers/usb/eth/asix88179.c b/drivers/usb/eth/asix88179.c index 94dfe85eff..cf4085d765 100644 --- a/drivers/usb/eth/asix88179.c +++ b/drivers/usb/eth/asix88179.c @@ -12,6 +12,7 @@ #include <linux/mii.h> #include "usb_ether.h" #include <malloc.h> +#include <memalign.h> #include <errno.h> /* ASIX AX88179 based USB 3.0 Ethernet Devices */ diff --git a/drivers/usb/eth/mcs7830.c b/drivers/usb/eth/mcs7830.c index c1b708600e..bbdad8b79a 100644 --- a/drivers/usb/eth/mcs7830.c +++ b/drivers/usb/eth/mcs7830.c @@ -14,6 +14,7 @@ #include <errno.h> #include <linux/mii.h> #include <malloc.h> +#include <memalign.h> #include <usb.h> #include "usb_ether.h" diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c index 1dcd088b8d..dc8fa8891b 100644 --- a/drivers/usb/eth/smsc95xx.c +++ b/drivers/usb/eth/smsc95xx.c @@ -11,6 +11,7 @@ #include <dm.h> #include <errno.h> #include <malloc.h> +#include <memalign.h> #include <usb.h> #include <asm/unaligned.h> #include <linux/mii.h> diff --git a/drivers/usb/gadget/ci_udc.c b/drivers/usb/gadget/ci_udc.c index 3e8eb8799f..1ba5054965 100644 --- a/drivers/usb/gadget/ci_udc.c +++ b/drivers/usb/gadget/ci_udc.c @@ -87,6 +87,7 @@ static int ci_ep_enable(struct usb_ep *ep, static int ci_ep_disable(struct usb_ep *ep); static int ci_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags); +static int ci_ep_dequeue(struct usb_ep *ep, struct usb_request *req); static struct usb_request * ci_ep_alloc_request(struct usb_ep *ep, unsigned int gfp_flags); static void ci_ep_free_request(struct usb_ep *ep, struct usb_request *_req); @@ -99,6 +100,7 @@ static struct usb_ep_ops ci_ep_ops = { .enable = ci_ep_enable, .disable = ci_ep_disable, .queue = ci_ep_queue, + .dequeue = ci_ep_dequeue, .alloc_request = ci_ep_alloc_request, .free_request = ci_ep_free_request, }; @@ -424,7 +426,7 @@ static void ci_ep_submit_next_request(struct ci_ep *ci_ep) int bit, num, len, in; struct ci_req *ci_req; u8 *buf; - uint32_t length, actlen; + uint32_t len_left, len_this_dtd; struct ept_queue_item *dtd, *qtd; ci_ep->req_primed = true; @@ -442,25 +444,23 @@ static void ci_ep_submit_next_request(struct ci_ep *ci_ep) ci_req->dtd_count = 0; buf = ci_req->hw_buf; - actlen = 0; + len_left = len; dtd = item; do { - length = min(ci_req->req.length - actlen, - (unsigned)EP_MAX_LENGTH_TRANSFER); + len_this_dtd = min(len_left, (unsigned)EP_MAX_LENGTH_TRANSFER); - dtd->info = INFO_BYTES(length) | INFO_ACTIVE; + dtd->info = INFO_BYTES(len_this_dtd) | INFO_ACTIVE; dtd->page0 = (unsigned long)buf; dtd->page1 = ((unsigned long)buf & 0xfffff000) + 0x1000; dtd->page2 = ((unsigned long)buf & 0xfffff000) + 0x2000; dtd->page3 = ((unsigned long)buf & 0xfffff000) + 0x3000; dtd->page4 = ((unsigned long)buf & 0xfffff000) + 0x4000; - len -= length; - actlen += length; - buf += length; + len_left -= len_this_dtd; + buf += len_this_dtd; - if (len) { + if (len_left) { qtd = (struct ept_queue_item *) memalign(ILIST_ALIGN, ILIST_ENT_SZ); dtd->next = (unsigned long)qtd; @@ -469,7 +469,7 @@ static void ci_ep_submit_next_request(struct ci_ep *ci_ep) } ci_req->dtd_count++; - } while (len); + } while (len_left); item = dtd; /* @@ -525,6 +525,30 @@ static void ci_ep_submit_next_request(struct ci_ep *ci_ep) writel(bit, &udc->epprime); } +static int ci_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct ci_ep *ci_ep = container_of(_ep, struct ci_ep, ep); + struct ci_req *ci_req; + + list_for_each_entry(ci_req, &ci_ep->queue, queue) { + if (&ci_req->req == _req) + break; + } + + if (&ci_req->req != _req) + return -EINVAL; + + list_del_init(&ci_req->queue); + + if (ci_req->req.status == -EINPROGRESS) { + ci_req->req.status = -ECONNRESET; + if (ci_req->req.complete) + ci_req->req.complete(_ep, _req); + } + + return 0; +} + static int ci_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags) { diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index d96296cd73..a13b21d0a0 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -948,6 +948,7 @@ static void composite_unbind(struct usb_gadget *gadget) debug("unbind config '%s'/%p\n", c->label, c); c->unbind(c); } + free(c); } if (composite->unbind) composite->unbind(cdev); diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 53f4672291..c5e35ee350 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -17,6 +17,7 @@ #include <net.h> #include <usb.h> #include <malloc.h> +#include <memalign.h> #include <linux/ctype.h> #include "gadget_chips.h" diff --git a/drivers/usb/gadget/f_thor.c b/drivers/usb/gadget/f_thor.c index 06139ee04d..ff1481ba37 100644 --- a/drivers/usb/gadget/f_thor.c +++ b/drivers/usb/gadget/f_thor.c @@ -18,6 +18,7 @@ #include <errno.h> #include <common.h> #include <malloc.h> +#include <memalign.h> #include <version.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c index ad89a0d2e6..2fa6da4091 100644 --- a/drivers/usb/gadget/g_dnl.c +++ b/drivers/usb/gadget/g_dnl.c @@ -93,8 +93,6 @@ static int g_dnl_unbind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; - free(cdev->config); - cdev->config = NULL; debug("%s: calling usb_gadget_disconnect for " "controller '%s'\n", __func__, gadget->name); usb_gadget_disconnect(gadget); diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index 85236aeb2a..541c0f9687 100644 --- a/drivers/usb/host/dwc2.c +++ b/drivers/usb/host/dwc2.c @@ -10,6 +10,7 @@ #include <errno.h> #include <usb.h> #include <malloc.h> +#include <memalign.h> #include <phys2bus.h> #include <usbroothubdes.h> #include <asm/io.h> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 88b670b7f8..135ef72622 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -15,6 +15,7 @@ #include <usb.h> #include <asm/io.h> #include <malloc.h> +#include <memalign.h> #include <watchdog.h> #include <linux/compiler.h> diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 0ffd838db2..9bde2b252c 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -41,6 +41,7 @@ #endif #include <malloc.h> +#include <memalign.h> #include <usb.h> #include "ohci.h" diff --git a/drivers/usb/host/usb-uclass.c b/drivers/usb/host/usb-uclass.c index b17a7d762e..c66ebb6678 100644 --- a/drivers/usb/host/usb-uclass.c +++ b/drivers/usb/host/usb-uclass.c @@ -10,6 +10,7 @@ #include <common.h> #include <dm.h> #include <errno.h> +#include <memalign.h> #include <usb.h> #include <dm/device-internal.h> #include <dm/lists.h> diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c index 411e5a0884..d1b6d15c8e 100644 --- a/drivers/usb/musb-new/musb_core.c +++ b/drivers/usb/musb-new/musb_core.c @@ -1550,7 +1550,7 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb) /*-------------------------------------------------------------------------*/ #if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \ - defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) + defined(CONFIG_ARCH_OMAP4) static irqreturn_t generic_interrupt(int irq, void *__hci) { diff --git a/drivers/video/anx9804.c b/drivers/video/anx9804.c index 83d60d672d..37ad69a039 100755 --- a/drivers/video/anx9804.c +++ b/drivers/video/anx9804.c @@ -14,8 +14,6 @@ #include <i2c.h> #include "anx9804.h" -#define BIT(x) (1 << (x)) - /* Registers at i2c address 0x38 */ #define ANX9804_HDCP_CONTROL_0_REG 0x01 diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c index 61d054dd89..7867fe3895 100644 --- a/drivers/video/bcm2835.c +++ b/drivers/video/bcm2835.c @@ -6,6 +6,7 @@ #include <common.h> #include <lcd.h> +#include <memalign.h> #include <asm/arch/mbox.h> #include <asm/global_data.h> diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c index 868c51254d..1c74e97c5e 100644 --- a/drivers/video/mb862xx.c +++ b/drivers/video/mb862xx.c @@ -419,7 +419,8 @@ void *video_hw_init (void) board_disp_init (); #endif -#if defined(CONFIG_SOCRATES) && !(CONFIG_POST & CONFIG_SYS_POST_SYSMON) +#if (defined(CONFIG_LWMON5) || \ + defined(CONFIG_SOCRATES)) && !(CONFIG_POST & CONFIG_SYS_POST_SYSMON) /* Lamp on */ board_backlight_switch (1); #endif diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 482a4bd5be..a007ae8234 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o -ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610 ls102xa)) +ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 mx7 vf610)) obj-y += imx_watchdog.o endif obj-$(CONFIG_S5P) += s5p_wdt.o diff --git a/drivers/watchdog/imx_watchdog.c b/drivers/watchdog/imx_watchdog.c index 1d18d4b269..0d775956bf 100644 --- a/drivers/watchdog/imx_watchdog.c +++ b/drivers/watchdog/imx_watchdog.c @@ -8,19 +8,7 @@ #include <asm/io.h> #include <watchdog.h> #include <asm/arch/imx-regs.h> - -struct watchdog_regs { - u16 wcr; /* Control */ - u16 wsr; /* Service */ - u16 wrsr; /* Reset Status */ -}; - -#define WCR_WDZST 0x01 -#define WCR_WDBG 0x02 -#define WCR_WDE 0x04 /* WDOG enable */ -#define WCR_WDT 0x08 -#define WCR_SRS 0x10 -#define SET_WCR_WT(x) (x << 8) +#include <fsl_wdog.h> #ifdef CONFIG_IMX_WATCHDOG void hw_watchdog_reset(void) @@ -55,7 +43,8 @@ void reset_cpu(ulong addr) { struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; - writew(WCR_WDE, &wdog->wcr); + clrsetbits_le16(&wdog->wcr, 0, WCR_WDE); + writew(0x5555, &wdog->wsr); writew(0xaaaa, &wdog->wsr); /* load minimum 1/2 second timeout */ while (1) { diff --git a/dts/Kconfig b/dts/Kconfig index a04bb962af..fb2d79edbc 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -37,7 +37,9 @@ config OF_EMBED bool "Embedded DTB for DT control" help If this option is enabled, the device tree will be picked up and - built into the U-Boot image. + built into the U-Boot image. This is suitable for local debugging + and development only and is not recommended for production devices. + Boards in the mainline U-Boot tree should not use it. config OF_HOSTFILE bool "Host filed DTB for DT control" @@ -59,6 +61,7 @@ config DEFAULT_DEVICE_TREE config OF_SPL_REMOVE_PROPS string "List of device tree properties to drop for SPL" depends on SPL_OF_CONTROL + default "clocks clock-names interrupt-parent" if SPL_PINCTRL_FULL default "pinctrl-0 pinctrl-names clocks clock-names interrupt-parent" help Since SPL normally runs in a reduced memory space, the device tree diff --git a/fs/ext4/dev.c b/fs/ext4/dev.c index c77c02cdfc..20f52566f0 100644 --- a/fs/ext4/dev.c +++ b/fs/ext4/dev.c @@ -25,6 +25,7 @@ #include <common.h> #include <config.h> +#include <memalign.h> #include <ext4fs.h> #include <ext_common.h> #include "ext4_common.h" diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c index cab5465b9d..727a2f753d 100644 --- a/fs/ext4/ext4_common.c +++ b/fs/ext4/ext4_common.c @@ -24,6 +24,7 @@ #include <ext4fs.h> #include <inttypes.h> #include <malloc.h> +#include <memalign.h> #include <stddef.h> #include <linux/stat.h> #include <linux/time.h> @@ -614,8 +615,7 @@ static int parse_path(char **arr, char *dirname) arr[i] = zalloc(strlen("/") + 1); if (!arr[i]) return -ENOMEM; - - arr[i++] = "/"; + memcpy(arr[i++], "/", strlen("/")); /* add each path entry after root */ while (token != NULL) { @@ -745,6 +745,11 @@ end: fail: free(depth_dirname); free(parse_dirname); + for (i = 0; i < depth; i++) { + if (!ptr[i]) + break; + free(ptr[i]); + } free(ptr); free(parent_inode); free(first_inode); @@ -765,6 +770,7 @@ static int check_filename(char *filename, unsigned int blknr) struct ext2_dirent *previous_dir = NULL; char *ptr = NULL; struct ext_filesystem *fs = get_fs(); + int ret = -1; /* get the first block of root */ first_block_no_of_root = blknr; @@ -818,12 +824,12 @@ static int check_filename(char *filename, unsigned int blknr) if (ext4fs_put_metadata(root_first_block_addr, first_block_no_of_root)) goto fail; - return inodeno; + ret = inodeno; } fail: free(root_first_block_buffer); - return -1; + return ret; } int ext4fs_filename_check(char *filename) @@ -2040,7 +2046,7 @@ static char *ext4fs_read_symlink(struct ext2fs_node *node) status = ext4fs_read_file(diro, 0, __le32_to_cpu(diro->inode.size), symlink, &actread); - if (status == 0) { + if ((status < 0) || (actread == 0)) { free(symlink); return 0; } diff --git a/fs/ext4/ext4_write.c b/fs/ext4/ext4_write.c index fbc4c4b1cc..e027916763 100644 --- a/fs/ext4/ext4_write.c +++ b/fs/ext4/ext4_write.c @@ -23,6 +23,7 @@ #include <common.h> +#include <memalign.h> #include <linux/stat.h> #include <div64.h> #include "ext4_common.h" @@ -986,26 +987,17 @@ int ext4_write_file(const char *filename, void *buf, loff_t offset, return -1; } - /* mount the filesystem */ - if (!ext4fs_mount(0)) { - printf("** Error Bad ext4 partition **\n"); - goto fail; - } - ret = ext4fs_write(filename, buf, len); - if (ret) { printf("** Error ext4fs_write() **\n"); goto fail; } - ext4fs_close(); *actwrite = len; return 0; fail: - ext4fs_close(); *actwrite = 0; return -1; diff --git a/fs/fat/fat.c b/fs/fat/fat.c index bccc3e3ed8..f939bc5dee 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -16,6 +16,7 @@ #include <asm/byteorder.h> #include <part.h> #include <malloc.h> +#include <memalign.h> #include <linux/compiler.h> #include <linux/ctype.h> @@ -45,11 +46,18 @@ static disk_partition_t cur_part_info; static int disk_read(__u32 block, __u32 nr_blocks, void *buf) { + ulong ret; + if (!cur_dev || !cur_dev->block_read) return -1; - return cur_dev->block_read(cur_dev->dev, - cur_part_info.start + block, nr_blocks, buf); + ret = cur_dev->block_read(cur_dev->dev, + cur_part_info.start + block, nr_blocks, buf); + + if (nr_blocks && ret == 0) + return -1; + + return ret; } int fat_set_blk_dev(block_dev_desc_t *dev_desc, disk_partition_t *info) @@ -895,6 +903,7 @@ int do_fat_read_at(const char *filename, loff_t pos, void *buffer, strcpy(fnamecopy, filename); downcase(fnamecopy); +root_reparse: if (*fnamecopy == '\0') { if (!dols) goto exit; @@ -1180,6 +1189,34 @@ rootdir_done: if (isdir && !(dentptr->attr & ATTR_DIR)) goto exit; + /* + * If we are looking for a directory, and found a directory + * type entry, and the entry is for the root directory (as + * denoted by a cluster number of 0), jump back to the start + * of the function, since at least on FAT12/16, the root dir + * lives in a hard-coded location and needs special handling + * to parse, rather than simply following the cluster linked + * list in the FAT, like other directories. + */ + if (isdir && (dentptr->attr & ATTR_DIR) && !START(dentptr)) { + /* + * Modify the filename to remove the prefix that gets + * back to the root directory, so the initial root dir + * parsing code can continue from where we are without + * confusion. + */ + strcpy(fnamecopy, nextname ?: ""); + /* + * Set up state the same way as the function does when + * first started. This is required for the root dir + * parsing code operates in its expected environment. + */ + subname = ""; + cursect = mydata->rootdir_sect; + isdir = 0; + goto root_reparse; + } + if (idx >= 0) subname = nextname; } diff --git a/fs/fat/fat_write.c b/fs/fat/fat_write.c index 98b88add83..af828d07bd 100644 --- a/fs/fat/fat_write.c +++ b/fs/fat/fat_write.c @@ -30,6 +30,8 @@ static void uppercase(char *str, int len) static int total_sector; static int disk_write(__u32 block, __u32 nr_blocks, void *buf) { + ulong ret; + if (!cur_dev || !cur_dev->block_write) return -1; @@ -39,8 +41,13 @@ static int disk_write(__u32 block, __u32 nr_blocks, void *buf) return -1; } - return cur_dev->block_write(cur_dev->dev, - cur_part_info.start + block, nr_blocks, buf); + ret = cur_dev->block_write(cur_dev->dev, + cur_part_info.start + block, + nr_blocks, buf); + if (nr_blocks && ret == 0) + return -1; + + return ret; } /* @@ -548,8 +555,9 @@ static int set_cluster(fsdata *mydata, __u32 clustnum, __u8 *buffer, unsigned long size) { - int idx = 0; + __u32 idx = 0; __u32 startsect; + int ret; if (clustnum > 0) startsect = mydata->data_begin + @@ -559,26 +567,45 @@ set_cluster(fsdata *mydata, __u32 clustnum, __u8 *buffer, debug("clustnum: %d, startsect: %d\n", clustnum, startsect); - if ((size / mydata->sect_size) > 0) { - if (disk_write(startsect, size / mydata->sect_size, buffer) < 0) { - debug("Error writing data\n"); + if ((unsigned long)buffer & (ARCH_DMA_MINALIGN - 1)) { + ALLOC_CACHE_ALIGN_BUFFER(__u8, tmpbuf, mydata->sect_size); + + printf("FAT: Misaligned buffer address (%p)\n", buffer); + + while (size >= mydata->sect_size) { + memcpy(tmpbuf, buffer, mydata->sect_size); + ret = disk_write(startsect++, 1, tmpbuf); + if (ret != 1) { + debug("Error writing data (got %d)\n", ret); + return -1; + } + + buffer += mydata->sect_size; + size -= mydata->sect_size; + } + } else if (size >= mydata->sect_size) { + idx = size / mydata->sect_size; + ret = disk_write(startsect, idx, buffer); + if (ret != idx) { + debug("Error writing data (got %d)\n", ret); return -1; } - } - if (size % mydata->sect_size) { - __u8 tmpbuf[mydata->sect_size]; + startsect += idx; + idx *= mydata->sect_size; + buffer += idx; + size -= idx; + } - idx = size / mydata->sect_size; - buffer += idx * mydata->sect_size; - memcpy(tmpbuf, buffer, size % mydata->sect_size); + if (size) { + ALLOC_CACHE_ALIGN_BUFFER(__u8, tmpbuf, mydata->sect_size); - if (disk_write(startsect + idx, 1, tmpbuf) < 0) { - debug("Error writing data\n"); + memcpy(tmpbuf, buffer, size); + ret = disk_write(startsect, 1, tmpbuf); + if (ret != 1) { + debug("Error writing data (got %d)\n", ret); return -1; } - - return 0; } return 0; @@ -683,6 +710,14 @@ set_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer, debug("%llu bytes\n", filesize); + if (!curclust) { + if (filesize) { + debug("error: nonempty clusterless file!\n"); + return -1; + } + return 0; + } + actsize = bytesperclust; endclust = curclust; do { @@ -694,28 +729,17 @@ set_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer, goto getit; if (CHECK_CLUST(newclust, mydata->fatsize)) { - debug("curclust: 0x%x\n", newclust); + debug("newclust: 0x%x\n", newclust); debug("Invalid FAT entry\n"); return 0; } endclust = newclust; actsize += bytesperclust; } - /* actsize >= file size */ - actsize -= bytesperclust; - /* set remaining clusters */ - if (set_cluster(mydata, curclust, buffer, (int)actsize) != 0) { - debug("error: writing cluster\n"); - return -1; - } /* set remaining bytes */ - *gotsize += actsize; - filesize -= actsize; - buffer += actsize; actsize = filesize; - - if (set_cluster(mydata, endclust, buffer, (int)actsize) != 0) { + if (set_cluster(mydata, curclust, buffer, (int)actsize) != 0) { debug("error: writing cluster\n"); return -1; } @@ -738,8 +762,8 @@ getit: filesize -= actsize; buffer += actsize; - if (CHECK_CLUST(curclust, mydata->fatsize)) { - debug("curclust: 0x%x\n", curclust); + if (CHECK_CLUST(newclust, mydata->fatsize)) { + debug("newclust: 0x%x\n", newclust); debug("Invalid FAT entry\n"); return 0; } @@ -749,15 +773,24 @@ getit: } /* - * Fill dir_entry + * Set start cluster in directory entry */ -static void fill_dentry(fsdata *mydata, dir_entry *dentptr, - const char *filename, __u32 start_cluster, __u32 size, __u8 attr) +static void set_start_cluster(const fsdata *mydata, dir_entry *dentptr, + __u32 start_cluster) { if (mydata->fatsize == 32) dentptr->starthi = cpu_to_le16((start_cluster & 0xffff0000) >> 16); dentptr->start = cpu_to_le16(start_cluster & 0xffff); +} + +/* + * Fill dir_entry + */ +static void fill_dentry(fsdata *mydata, dir_entry *dentptr, + const char *filename, __u32 start_cluster, __u32 size, __u8 attr) +{ + set_start_cluster(mydata, dentptr, start_cluster); dentptr->size = cpu_to_le32(size); dentptr->attr = attr; @@ -1012,91 +1045,89 @@ static int do_fat_write(const char *filename, void *buffer, loff_t size, if (retdent) { /* Update file size and start_cluster in a directory entry */ retdent->size = cpu_to_le32(size); - start_cluster = FAT2CPU16(retdent->start); - if (mydata->fatsize == 32) - start_cluster |= - (FAT2CPU16(retdent->starthi) << 16); - - ret = check_overflow(mydata, start_cluster, size); - if (ret) { - printf("Error: %llu overflow\n", size); - goto exit; - } + start_cluster = START(retdent); + + if (start_cluster) { + if (size) { + ret = check_overflow(mydata, start_cluster, + size); + if (ret) { + printf("Error: %llu overflow\n", size); + goto exit; + } + } - ret = clear_fatent(mydata, start_cluster); - if (ret) { - printf("Error: clearing FAT entries\n"); - goto exit; - } + ret = clear_fatent(mydata, start_cluster); + if (ret) { + printf("Error: clearing FAT entries\n"); + goto exit; + } - ret = set_contents(mydata, retdent, buffer, size, actwrite); - if (ret < 0) { - printf("Error: writing contents\n"); - goto exit; - } - debug("attempt to write 0x%llx bytes\n", *actwrite); + if (!size) + set_start_cluster(mydata, retdent, 0); + } else if (size) { + ret = start_cluster = find_empty_cluster(mydata); + if (ret < 0) { + printf("Error: finding empty cluster\n"); + goto exit; + } - /* Flush fat buffer */ - ret = flush_fat_buffer(mydata); - if (ret) { - printf("Error: flush fat buffer\n"); - goto exit; - } + ret = check_overflow(mydata, start_cluster, size); + if (ret) { + printf("Error: %llu overflow\n", size); + goto exit; + } - /* Write directory table to device */ - ret = set_cluster(mydata, dir_curclust, - get_dentfromdir_block, - mydata->clust_size * mydata->sect_size); - if (ret) { - printf("Error: writing directory entry\n"); - goto exit; + set_start_cluster(mydata, retdent, start_cluster); } } else { /* Set short name to set alias checksum field in dir_slot */ set_name(empty_dentptr, filename); fill_dir_slot(mydata, &empty_dentptr, filename); - ret = start_cluster = find_empty_cluster(mydata); - if (ret < 0) { - printf("Error: finding empty cluster\n"); - goto exit; - } + if (size) { + ret = start_cluster = find_empty_cluster(mydata); + if (ret < 0) { + printf("Error: finding empty cluster\n"); + goto exit; + } - ret = check_overflow(mydata, start_cluster, size); - if (ret) { - printf("Error: %llu overflow\n", size); - goto exit; + ret = check_overflow(mydata, start_cluster, size); + if (ret) { + printf("Error: %llu overflow\n", size); + goto exit; + } + } else { + start_cluster = 0; } /* Set attribute as archieve for regular file */ fill_dentry(mydata, empty_dentptr, filename, start_cluster, size, 0x20); - ret = set_contents(mydata, empty_dentptr, buffer, size, - actwrite); - if (ret < 0) { - printf("Error: writing contents\n"); - goto exit; - } - debug("attempt to write 0x%llx bytes\n", *actwrite); + retdent = empty_dentptr; + } - /* Flush fat buffer */ - ret = flush_fat_buffer(mydata); - if (ret) { - printf("Error: flush fat buffer\n"); - goto exit; - } + ret = set_contents(mydata, retdent, buffer, size, actwrite); + if (ret < 0) { + printf("Error: writing contents\n"); + goto exit; + } + debug("attempt to write 0x%llx bytes\n", *actwrite); - /* Write directory table to device */ - ret = set_cluster(mydata, dir_curclust, - get_dentfromdir_block, - mydata->clust_size * mydata->sect_size); - if (ret) { - printf("Error: writing directory entry\n"); - goto exit; - } + /* Flush fat buffer */ + ret = flush_fat_buffer(mydata); + if (ret) { + printf("Error: flush fat buffer\n"); + goto exit; } + /* Write directory table to device */ + ret = set_cluster(mydata, dir_curclust, get_dentfromdir_block, + mydata->clust_size * mydata->sect_size); + if (ret) + printf("Error: writing directory entry\n"); + exit: free(mydata->fatbuf); return ret; diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 0bf52db0ce..41763a1897 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -28,6 +28,9 @@ #include <linux/writeback.h> #else +#include <common.h> +#include <malloc.h> +#include <memalign.h> #include <linux/compat.h> #include <linux/stat.h> #include <linux/err.h> diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c index 4daa7fad53..f7a084747e 100644 --- a/fs/ubifs/ubifs.c +++ b/fs/ubifs/ubifs.c @@ -23,6 +23,8 @@ * Adrian Hunter */ +#include <common.h> +#include <memalign.h> #include "ubifs.h" #include <u-boot/zlib.h> diff --git a/include/bitfield.h b/include/bitfield.h index b884c74600..a59f3c279a 100644 --- a/include/bitfield.h +++ b/include/bitfield.h @@ -27,6 +27,12 @@ * old = bitfield_extract(old_reg_val, 10, 5); * new_reg_val = bitfield_replace(old_reg_val, 10, 5, new); * + * or + * + * mask = bitfield_mask(10, 5); + * old = bitfield_extract_by_mask(old_reg_val, mask); + * new_reg_val = bitfield_replace_by_mask(old_reg_val, mask, new); + * * The numbers 10 and 5 could for example come from data * tables which describe all bitfields in all registers. */ @@ -56,3 +62,29 @@ static inline uint bitfield_replace(uint reg_val, uint shift, uint width, return (reg_val & ~mask) | ((bitfield_val << shift) & mask); } + +/* Produces a shift of the bitfield given a mask */ +static inline uint bitfield_shift(uint mask) +{ + return mask ? ffs(mask) - 1 : 0; +} + +/* Extract the value of a bitfield found within a given register value */ +static inline uint bitfield_extract_by_mask(uint reg_val, uint mask) +{ + uint shift = bitfield_shift(mask); + + return (reg_val & mask) >> shift; +} + +/* + * Replace the value of a bitfield found within a given register value + * Returns the newly modified uint value with the replaced field. + */ +static inline uint bitfield_replace_by_mask(uint reg_val, uint mask, + uint bitfield_val) +{ + uint shift = bitfield_shift(mask); + + return (reg_val & ~mask) | ((bitfield_val << shift) & mask); +} diff --git a/include/common.h b/include/common.h index c12f402f77..ecb1f0682e 100644 --- a/include/common.h +++ b/include/common.h @@ -826,6 +826,9 @@ int gzwrite(unsigned char *src, int len, u64 startoffs, u64 szexpected); +/* lib/lz4_wrapper.c */ +int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn); + /* lib/qsort.c */ void qsort(void *base, size_t nmemb, size_t size, int(*compar)(const void *, const void *)); @@ -974,102 +977,6 @@ int cpu_release(int nr, int argc, char * const argv[]); #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) /* - * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It - * is used to align DMA buffers. - */ -#ifndef __ASSEMBLY__ -#include <asm/cache.h> -#endif - -/* - * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the - * stack that meets the minimum architecture alignment requirements for DMA. - * Such a buffer is useful for DMA operations where flushing and invalidating - * the cache before and after a read and/or write operation is required for - * correct operations. - * - * When called the macro creates an array on the stack that is sized such - * that: - * - * 1) The beginning of the array can be advanced enough to be aligned. - * - * 2) The size of the aligned portion of the array is a multiple of the minimum - * architecture alignment required for DMA. - * - * 3) The aligned portion contains enough space for the original number of - * elements requested. - * - * The macro then creates a pointer to the aligned portion of this array and - * assigns to the pointer the address of the first element in the aligned - * portion of the array. - * - * Calling the macro as: - * - * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024); - * - * Will result in something similar to saying: - * - * uint32_t buffer[1024]; - * - * The following differences exist: - * - * 1) The resulting buffer is guaranteed to be aligned to the value of - * ARCH_DMA_MINALIGN. - * - * 2) The buffer variable created by the macro is a pointer to the specified - * type, and NOT an array of the specified type. This can be very important - * if you want the address of the buffer, which you probably do, to pass it - * to the DMA hardware. The value of &buffer is different in the two cases. - * In the macro case it will be the address of the pointer, not the address - * of the space reserved for the buffer. However, in the second case it - * would be the address of the buffer. So if you are replacing hard coded - * stack buffers with this macro you need to make sure you remove the & from - * the locations where you are taking the address of the buffer. - * - * Note that the size parameter is the number of array elements to allocate, - * not the number of bytes. - * - * This macro can not be used outside of function scope, or for the creation - * of a function scoped static buffer. It can not be used to create a cache - * line aligned global buffer. - */ -#define PAD_COUNT(s, pad) (((s) - 1) / (pad) + 1) -#define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad) -#define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad) \ - char __##name[ROUND(PAD_SIZE((size) * sizeof(type), pad), align) \ - + (align - 1)]; \ - \ - type *name = (type *) ALIGN((uintptr_t)__##name, align) -#define ALLOC_ALIGN_BUFFER(type, name, size, align) \ - ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, 1) -#define ALLOC_CACHE_ALIGN_BUFFER_PAD(type, name, size, pad) \ - ALLOC_ALIGN_BUFFER_PAD(type, name, size, ARCH_DMA_MINALIGN, pad) -#define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \ - ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN) - -/* - * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's - * purpose is to allow allocating aligned buffers outside of function scope. - * Usage of this macro shall be avoided or used with extreme care! - */ -#define DEFINE_ALIGN_BUFFER(type, name, size, align) \ - static char __##name[ALIGN(size * sizeof(type), align)] \ - __aligned(align); \ - \ - static type *name = (type *)__##name -#define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \ - DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN) - -#ifndef __ASSEMBLY__ -#include <malloc.h> - -static inline void *malloc_cache_aligned(size_t size) -{ - return memalign(ARCH_DMA_MINALIGN, ALIGN(size, ARCH_DMA_MINALIGN)); -} -#endif - -/* * check_member() - Check the offset of a structure member * * @structure: Name of structure (e.g. global_data) diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 9ed6c61ab7..17bd18031d 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -406,7 +406,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ -#define CONFIG_SYS_NAND_QUIET_TEST 1 #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index cd5b3e2ada..5b61b56a4e 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -759,7 +759,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg /* Enable VSC9953 L2 Switch driver on T1040 SoC */ #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB) #define CONFIG_VSC9953 -#define CONFIG_VSC9953_CMD +#define CONFIG_CMD_ETHSW #ifdef CONFIG_T1040RDB #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x04 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x08 diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index e89c49e1e3..3cf768e662 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -70,6 +70,7 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ + DEFAULT_MMC_TI_ARGS \ "boot_fdt=try\0" \ "bootpart=0:2\0" \ "bootdir=/boot\0" \ @@ -80,15 +81,8 @@ "uuid_disk=${uuid_gpt_disk};" \ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ "optargs=\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 ro\0" \ - "mmcrootfstype=ext4 rootwait\0" \ "ramroot=/dev/ram0 rw\0" \ "ramrootfstype=ext2\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ "spiroot=/dev/mtdblock4 rw\0" \ "spirootfstype=jffs2\0" \ "spisrcaddr=0xe0000\0" \ @@ -112,7 +106,7 @@ "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "mmcloados=run mmcargs; " \ + "mmcloados=run args_mmc; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ "if run loadfdt; then " \ "bootz ${loadaddr} - ${fdtaddr}; " \ diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h new file mode 100644 index 0000000000..f655e69f90 --- /dev/null +++ b/include/configs/am335x_sl50.h @@ -0,0 +1,138 @@ +/* + * am335x_sl50.h + * + * Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_AM335X_EVM_H +#define __CONFIG_AM335X_EVM_H + +#include <configs/ti_am335x_common.h> +#undef CONFIG_BOOTDELAY + +#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_FIT +# define CONFIG_FIT +#endif +# define CONFIG_TIMESTAMP +# define CONFIG_LZO +#endif + +#define CONFIG_SYS_BOOTM_LEN (16 << 20) + +/*#define CONFIG_MACH_TYPE 3589 Until the next sync */ +#define CONFIG_BOARD_LATE_INIT + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +/* Always 128 KiB env size */ +#define CONFIG_ENV_SIZE (128 << 10) + +/* Enhance our eMMC support / experience. */ +#define CONFIG_CMD_GPT +#define CONFIG_EFI_PARTITION + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#ifndef CONFIG_SPL_BUILD + +#include <config_distro_defaults.h> + +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x80000000\0" \ + "pxefile_addr_r=0x80100000\0" \ + "kernel_addr_r=0x82000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "ramdisk_addr_r=0x88080000\0" \ + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(MMC, mmc, 1) + +#define AM335XX_BOARD_FDTFILE \ + "fdtfile=am335x-sl50.dtb\0" \ + +#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + AM335XX_BOARD_FDTFILE \ + MEM_LAYOUT_ENV_SETTINGS \ + BOOTENV + +#endif + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_CMD_EEPROM +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_MULTI_EEPROMS + +/* PMIC support */ +#define CONFIG_POWER_TPS65217 +#define CONFIG_POWER_TPS65910 + +/* SPL */ +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT + +/* Bootcount using the RTC block */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_BOOTCOUNT_AM33XX +#define CONFIG_SYS_BOOTCOUNT_BE + +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" + +#ifndef CONFIG_SPL_USBETH_SUPPORT +/* To support eMMC booting */ +#define CONFIG_STORAGE_EMMC +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 +#endif + +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) +/* Remove other SPL modes. */ +#undef CONFIG_SPL_YMODEM_SUPPORT +#undef CONFIG_SPL_NAND_SUPPORT +#undef CONFIG_SPL_MMC_SUPPORT +#define CONFIG_ENV_IS_NOWHERE +#undef CONFIG_ENV_IS_IN_NAND +/* disable host part of MUSB in SPL */ +#undef CONFIG_MUSB_HOST +/* disable EFI partitions and partition UUID support */ +#undef CONFIG_PARTITION_UUIDS +#undef CONFIG_EFI_PARTITION +/* General network SPL */ +#define CONFIG_SPL_NET_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" +#endif + +#if defined(CONFIG_EMMC_BOOT) +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SYS_MMC_ENV_DEV 1 +#define CONFIG_SYS_MMC_ENV_PART 2 +#define CONFIG_ENV_OFFSET 0x0 +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#endif + +/* Network. */ +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC + +#endif /* ! __CONFIG_AM335X_SL50_H */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 15fa3e3fec..67d5c48dde 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -216,6 +216,7 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ + DEFAULT_MMC_TI_ARGS \ "fdtfile=undefined\0" \ "bootpart=0:2\0" \ "bootdir=/boot\0" \ @@ -225,18 +226,11 @@ "uuid_disk=${uuid_gpt_disk};" \ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ "optargs=\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ "usbroot=/dev/sda2 rw\0" \ "usbrootfstype=ext4 rootwait\0" \ "usbdev=0\0" \ "ramroot=/dev/ram0 rw\0" \ "ramrootfstype=ext2\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ "usbargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${usbroot} " \ @@ -268,7 +262,7 @@ "if run loadimage; then " \ "run loadfdt; " \ "echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ + "run args_mmc; " \ "bootz ${loadaddr} - ${fdtaddr}; " \ "fi;" \ "fi;\0" \ @@ -335,6 +329,7 @@ #define CONFIG_DRIVER_TI_CPSW #define CONFIG_PHYLIB +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NET_VCI_STRING "AM43xx U-Boot SPL" diff --git a/include/configs/apf27.h b/include/configs/apf27.h index 43fbdd3d11..49fbcac776 100644 --- a/include/configs/apf27.h +++ b/include/configs/apf27.h @@ -317,6 +317,8 @@ #ifdef CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_MXC_I2C1_SPEED 100000 /* 100 kHz */ #define CONFIG_SYS_MXC_I2C1_SLAVE 0x7F #define CONFIG_SYS_MXC_I2C2_SPEED 100000 /* 100 kHz */ diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h index 20afdd6bc0..f03297e137 100644 --- a/include/configs/aristainetos-common.h +++ b/include/configs/aristainetos-common.h @@ -189,6 +189,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 0x7f diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 437a745414..b08f341227 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -49,6 +49,10 @@ /* The PERIPHBASE in the CBAR register is wrong on the Arndale, so override it */ #define CONFIG_ARM_GIC_BASE_ADDRESS 0x10480000 +/* CPU Errata */ +#define CONFIG_ARM_ERRATA_773022 +#define CONFIG_ARM_ERRATA_774769 + /* Power */ #define CONFIG_POWER #define CONFIG_POWER_I2C diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 3d6b0ae0c3..a5990cec03 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -53,6 +53,13 @@ #define CONFIG_CMD_DHCP #ifdef CONFIG_SYS_USE_MMC + +#ifdef CONFIG_ENV_IS_IN_MMC +/* Use raw reserved sectors to save environment */ +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else /* u-boot env in sd/mmc card */ #define CONFIG_ENV_IS_IN_FAT #define CONFIG_FAT_WRITE @@ -60,6 +67,7 @@ #define FAT_ENV_DEVICE_AND_PART "0" #define FAT_ENV_FILE "uboot.env" #define CONFIG_ENV_SIZE 0x4000 +#endif #define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \ "setenv dtb_name at91-${board_name}.dtb; " \ diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h deleted file mode 100644 index 124a7663d6..0000000000 --- a/include/configs/balloon3.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Balloon3 configuration file - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_BALLOON3 1 /* Balloon3 board */ - -/* - * Environment settings - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOOTCOMMAND \ - "fpga load 0x0 0x50000 0x62638; " \ - "if usb reset && fatload usb 0 0xa4000000 uImage; then " \ - "bootm 0xa4000000; " \ - "fi; " \ - "bootm 0xd0000;" -#define CONFIG_BOOTARGS "console=tty0 console=ttyS2,115200" -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_TEXT_BASE 0x0 -#define CONFIG_LZMA /* LZMA compression support */ - -/* - * Serial Console Configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_STUART 1 -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Bootloader Components Configuration - */ -#undef CONFIG_CMD_ENV -#define CONFIG_CMD_USB -#define CONFIG_CMD_FPGA_LOADMK -#undef CONFIG_LCD - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " -#else -#endif -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -/* - * Clock Configuration - */ -#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 3 /* 3 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_2 0xb0000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_3 0x80000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x08000000 /* 128 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x18000000 /* 384 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa1000000 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (PHYS_SDRAM_1 + GENERATED_GBL_DATA_SIZE + 2048) - -/* - * NOR FLASH - */ -#ifdef CONFIG_CMD_FLASH -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 -#define CONFIG_SYS_FLASH_LOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_ENV_IS_IN_FLASH -#else -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_NOWHERE -#endif - -#define CONFIG_SYS_MONITOR_BASE 0x000000 -#define CONFIG_SYS_MONITOR_LEN 0x40000 - -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0x307dc7fd -#define CONFIG_SYS_GPSR1_VAL 0x03cffa4e -#define CONFIG_SYS_GPSR2_VAL 0x7131c000 -#define CONFIG_SYS_GPSR3_VAL 0x01e1f3ff - -#define CONFIG_SYS_GPCR0_VAL 0x0 -#define CONFIG_SYS_GPCR1_VAL 0x0 -#define CONFIG_SYS_GPCR2_VAL 0x0 -#define CONFIG_SYS_GPCR3_VAL 0x0 - -#define CONFIG_SYS_GPDR0_VAL 0xc0f98e02 -#define CONFIG_SYS_GPDR1_VAL 0xfcffa8b7 -#define CONFIG_SYS_GPDR2_VAL 0x22e3ffff -#define CONFIG_SYS_GPDR3_VAL 0x000201fe - -#define CONFIG_SYS_GAFR0_L_VAL 0x96c00000 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5e5459b -#define CONFIG_SYS_GAFR1_L_VAL 0x699b759a -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a5aa -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x01f9a6aa -#define CONFIG_SYS_GAFR3_L_VAL 0x54510003 -#define CONFIG_SYS_GAFR3_U_VAL 0x00001599 - -#define CONFIG_SYS_PSSR_VAL 0x30 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0xffffffff -#define CONFIG_SYS_CCCR 0x00000290 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x7ff07ff8 -#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0 -#define CONFIG_SYS_MSC2_VAL 0x74a42491 -#define CONFIG_SYS_MDCNFG_VAL 0x89d309d3 -#define CONFIG_SYS_MDREFR_VAL 0x001d8018 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00014307 -#define CONFIG_SYS_MCMEM1_VAL 0x00014307 -#define CONFIG_SYS_MCATT0_VAL 0x0001c787 -#define CONFIG_SYS_MCATT1_VAL 0x0001c787 -#define CONFIG_SYS_MCIO0_VAL 0x0001430f -#define CONFIG_SYS_MCIO1_VAL 0x0001430f - -/* - * LCD - */ -#ifdef CONFIG_LCD -#define CONFIG_BALLOON3LCD -#define CONFIG_VIDEO_LOGO -#define CONFIG_CMD_BMP -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) -#endif - -/* - * USB - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "balloon3" -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#endif - -/* - * FPGA - */ -#ifdef CONFIG_CMD_FPGA -#define CONFIG_FPGA -#define CONFIG_FPGA_XILINX -#define CONFIG_FPGA_SPARTAN3 -#define CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_SYS_FPGA_WAIT 1000 -#define CONFIG_MAX_FPGA_DEVICES 1 -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 838ef1f00a..c6960920b2 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -14,18 +14,16 @@ /* ------------------------------------------------------------------------- */ #define BUR_COMMON_ENV \ "usbscript=usb start && fatload usb 0 0x80000000 usbscript.img && source\0" \ -"defaultip=192.168.60.253\0" \ -"defaultsip=192.168.60.254\0" \ +"brdefaultip=if test -r ${ipaddr}; then; else" \ +" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \ +" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \ "netconsole=echo switching to network console ...; " \ -"if dhcp; then setenv ncip ${serverip}; " \ -"else " \ -"setenv ncip 192.168.60.254; setenv serverip 192.168.60.254; " \ -"setenv gatewayip 192.168.60.254; setenv ipaddr 192.168.60.1; " \ -"fi; " \ +"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \ "setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \ "setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \ "setenv stdout nc;setenv stdin nc;setenv stderr nc\0" +#define CONFIG_PREBOOT "run brdefaultip" #define CONFIG_CMD_TIME #define CONFIG_SYS_GENERIC_BOARD diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 92930c8f72..e0aa4b0894 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -33,17 +33,14 @@ #define CONFIG_CMD_BMODE /* Thermal support */ -#define CONFIG_IMX6_THERMAL - -#define CONFIG_CMD_FUSE -#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) -#define CONFIG_MXC_OCOTP -#endif +#define CONFIG_IMX_THERMAL /* I2C Configs */ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_SPEED 100000 @@ -68,6 +65,20 @@ #define CONFIG_USB_KEYBOARD #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP +#define CONFIG_CI_UDC +#define CONFIG_USBD_HS +#define CONFIG_USB_GADGET_DUALSPEED + +#define CONFIG_USB_GADGET +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_FUNCTION_MASS_STORAGE +#define CONFIG_USB_GADGET_DOWNLOAD +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "Congatec" + /* Framebuffer */ #define CONFIG_VIDEO #define CONFIG_VIDEO_IPUV3 diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 12734a10bf..05132047b7 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -198,6 +198,8 @@ /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_MXC_I2C3_SPEED 400000 diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 281d614de1..e5fb474afc 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -147,7 +147,6 @@ /* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index 33b22a72b9..f3d1f4352e 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -36,6 +36,8 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap.h> +#define CONFIG_MACH_TYPE MACH_TYPE_CM_T3517 + /* * Display CPU and Board information */ @@ -66,7 +68,7 @@ /* * Size of malloc() pool */ -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) /* @@ -152,7 +154,6 @@ /* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ @@ -170,6 +171,7 @@ "loadaddr=0x82000000\0" \ "baudrate=115200\0" \ "console=ttyO2,115200n8\0" \ + "netretry=yes\0" \ "mpurate=auto\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16@60\0" \ @@ -274,6 +276,8 @@ #define CONFIG_SMC911X #define CONFIG_SMC911X_32_BIT #define CONFIG_SMC911X_BASE (0x2C000000 + (16 << 20)) +#define CONFIG_ARP_TIMEOUT 200UL +#define CONFIG_NET_RETRY_COUNT 5 #endif /* CONFIG_CMD_NET */ /* additions for new relocation code, must be added to all boards */ diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h deleted file mode 100644 index 82f4fe7d3c..0000000000 --- a/include/configs/cpu9260.h +++ /dev/null @@ -1,485 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * Ilko Iliev <www.ronetix.at> - * - * (C) Copyright 2009 - * Eric Benard <eric@eukrea.com> - * - * Configuration settings for the Eukrea CPU9260 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* to be removed once maemory-map.h is fixed */ -#define AT91_BASE_SYS 0xffffe800 -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) - -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 - -#if defined(CONFIG_CPU9G20) -#define CONFIG_AT91SAM9G20 -#elif defined(CONFIG_CPU9260) -#define CONFIG_AT91SAM9260 -#else -#error "Unknown board" -#endif - -#include <asm/arch/hardware.h> - -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#if defined(CONFIG_NANDBOOT) -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0x23f00000 -#else -#define CONFIG_SYS_TEXT_BASE 0x00000000 -#endif - -/* clocks */ -#if defined(CONFIG_CPU9G20) -#define MASTER_PLL_DIV 0x01 -#define MASTER_PLL_MUL 0x2B -#elif defined(CONFIG_CPU9260) -#define MASTER_PLL_DIV 0x09 -#define MASTER_PLL_MUL 0x61 -#endif - -/* CKGR_MOR - enable main osc. */ -#define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOSCEN | \ - (255 << 8)) /* Main Oscillator Start-up Time */ -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ - ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ - AT91_PMC_OUT | \ - ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) -#endif - -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_6 | \ - AT91_PMC_PDIV_2) -#define CONFIG_SYS_MCKR2_VAL \ - CONFIG_SYS_MCKR1_VAL -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_SLOW | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) -#define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) -#endif - -/* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 -/* no pull-up for D[31:16] */ -#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 - -/* EBI_CSA, 3.3V, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ -#define CONFIG_SYS_MATRIX_EBICSA_VAL \ - (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A | \ - AT91_MATRIX_CSA_EBI_CS3A | AT91_MATRIX_CSA_VDDIOMSEL_3_3V) - -/* SDRAM */ -/* SDRAMC_MR Mode register */ -#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL -/* SDRAMC_TR - Refresh Timer register */ -#define CONFIG_SYS_SDRC_TR_VAL1 0x287 -/* SDRAMC_CR - Configuration register*/ -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_SDRC_CR_VAL_64MB \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_2 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* Write Recovery Delay */ \ - (9 << 12) | /* Row Cycle Delay */ \ - (3 << 16) | /* Row Precharge Delay */ \ - (3 << 20) | /* Row to Column Delay */ \ - (6 << 24) | /* Active to Precharge Delay */ \ - (10 << 28)) /* Exit Self Refresh to Active Delay */ - -#define CONFIG_SYS_SDRC_CR_VAL_128MB \ - (AT91_SDRAMC_NC_10 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_2 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* Write Recovery Delay */ \ - (9 << 12) | /* Row Cycle Delay */ \ - (3 << 16) | /* Row Precharge Delay */ \ - (3 << 20) | /* Row to Column Delay */ \ - (6 << 24) | /* Active to Precharge Delay */ \ - (10 << 28)) /* Exit Self Refresh to Active Delay */ -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_SDRC_CR_VAL_64MB \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_2 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* Write Recovery Delay */ \ - (7 << 12) | /* Row Cycle Delay */ \ - (2 << 16) | /* Row Precharge Delay */ \ - (2 << 20) | /* Row to Column Delay */ \ - (5 << 24) | /* Active to Precharge Delay */ \ - (8 << 28)) /* Exit Self Refresh to Active Delay */ - -#define CONFIG_SYS_SDRC_CR_VAL_128MB \ - (AT91_SDRAMC_NC_10 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_2 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* Write Recovery Delay */ \ - (7 << 12) | /* Row Cycle Delay */ \ - (2 << 16) | /* Row Precharge Delay */ \ - (2 << 20) | /* Row to Column Delay */ \ - (5 << 24) | /* Active to Precharge Delay */ \ - (8 << 28)) /* Exit Self Refresh to Active Delay */ -#endif - -/* Memory Device Register -> SDRAM */ -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE -#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH -#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR -#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL -#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ -#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ - -/* setup SMC0, CS0 (NOR Flash) - 16-bit */ -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \ - AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_PULSE_NWE(8) | AT91_SMC_PULSE_NCS_WR(8) | \ - AT91_SMC_PULSE_NRD(14) | AT91_SMC_PULSE_NCS_RD(14)) -#define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(14)) -#define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ - AT91_SMC_MODE_DBW_16 | \ - AT91_SMC_MODE_TDF | \ - AT91_SMC_MODE_TDF_CYCLE(3)) -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \ - AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_PULSE_NWE(6) | AT91_SMC_PULSE_NCS_WR(6) | \ - AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(10)) -#define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(10)) -#define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ - AT91_SMC_MODE_DBW_16 | \ - AT91_SMC_MODE_TDF | \ - AT91_SMC_MODE_TDF_CYCLE(2)) -#endif - -/* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ - (AT91_RSTC_KEY | \ - AT91_RSTC_CR_PROCRST | \ - AT91_RSTC_MR_ERSTL(1) | \ - AT91_RSTC_MR_ERSTL(2)) - -/* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ - AT91_WDT_MR_WDV(0xfff) | \ - AT91_WDT_MR_WDDIS | \ - AT91_WDT_MR_WDD(0xfff)) - -/* - * Hardware drivers - */ -#define CONFIG_AT91SAM9_WATCHDOG -#define CONFIG_AT91_GPIO -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS - -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NAND -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MII - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9G20_128M) -#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) -#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_128MB -#else -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) -#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_64MB -#endif - -/* NAND flash */ -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 -#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PC(13) -#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) - -/* NOR flash */ -#if defined(CONFIG_NANDBOOT) -#define CONFIG_SYS_NO_FLASH -#else -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_2 0x12000000 -#define CONFIG_SYS_FLASH_BANKS_LIST \ - { PHYS_FLASH_1, PHYS_FLASH_2 } -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_SECT (255+4) -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#endif - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_MACB_SEARCH_PHY -#define CONFIG_AT91_WANTS_COMMON_PHY - -/* LEDS */ -/* Status LED */ -#define CONFIG_STATUS_LED -#define CONFIG_BOARD_SPECIFIC_LED -#define STATUS_LED_RED 0 -#define STATUS_LED_GREEN 1 -#define STATUS_LED_YELLOW 2 -#define STATUS_LED_BLUE 3 -/* Red */ -#define STATUS_LED_BIT STATUS_LED_RED -#define STATUS_LED_STATE STATUS_LED_OFF -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -/* Green */ -#define STATUS_LED_BIT1 STATUS_LED_GREEN -#define STATUS_LED_STATE1 STATUS_LED_OFF -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -/* Yellow */ -#define STATUS_LED_BIT2 STATUS_LED_YELLOW -#define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) -/* Blue */ -#define STATUS_LED_BIT3 STATUS_LED_BLUE -#define STATUS_LED_STATE3 STATUS_LED_ON -#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) -/* Optional value */ -#define STATUS_LED_BOOT STATUS_LED_BIT - -#define CONFIG_RED_LED AT91_PIO_PORTC, 11 -#define CONFIG_GREEN_LED AT91_PIO_PORTC, 12 -#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 7 -#define CONFIG_BLUE_LED AT91_PIO_PORTC, 9 - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g20" -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" -#endif -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 -#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024) - -#if defined(CONFIG_NANDBOOT) -#define CONFIG_SYS_USE_NANDFLASH -#undef CONFIG_SYS_USE_FLASH -#else -#define CONFIG_SYS_USE_FLASH -#undef CONFIG_SYS_USE_NANDFLASH -#endif - -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_BASEDIR "cpu9G20" -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_BASEDIR "cpu9260" -#endif - -#if defined(CONFIG_SYS_USE_FLASH) -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BOOTCOMMAND "run flashboot" - -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" -#define MTDPARTS_DEFAULT \ - "mtdparts=physmap-flash.0:" \ - "256k(u-boot)ro," \ - "128k(u-boot-env)ro," \ - "1792k(kernel)," \ - "-(rootfs);" \ - "atmel_nand:-(nand)" - -#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 " - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "partition=nand0,0\0" \ - "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ - "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \ - "run ramargs;bootm 22000000\0" \ - "flashboot=run ramargs;bootm 0x10060000\0" \ - "basedir=" CONFIG_SYS_BASEDIR "\0" \ - "updtub=tftp 0x24000000 $(basedir)/u-boot.bin;protect " \ - "off 0x10000000 0x1003ffff;erase 0x10000000 " \ - "0x1003ffff;cp.b 0x24000000 0x10000000 " \ - "$(filesize)\0" \ - "updtui=tftp 0x24000000 $(basedir)/uImage;protect off" \ - " 0x10060000 0x1021ffff;erase 0x10060000 " \ - "0x1021ffff;cp.b 0x24000000 0x10060000 " \ - "$(filesize)\0" \ - "updtrfs=tftp 0x24000000 $(basedir)/rootfs.jffs2; " \ - "protect off 0x10220000 0x13ffffff;erase " \ - "0x10220000 0x13ffffff;cp.b 0x24000000 " \ - "0x10220000 $(filesize)\0" \ - "" -#elif defined(CONFIG_NANDBOOT) -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BOOTCOMMAND "run flashboot" - -#define MTDIDS_DEFAULT "nand0=atmel_nand" -#define MTDPARTS_DEFAULT \ - "mtdparts=atmel_nand:" \ - "128k(bootstrap)ro," \ - "256k(u-boot)ro," \ - "128k(u-boot-env)ro," \ - "128k(u-boot-env2)ro," \ - "2M(kernel)," \ - "-(rootfs)" - -#define CONFIG_BOOTARGS "root=ubi0:eukrea-cpu9260-rootfs " \ - "ubi.mtd=5 rootfstype=ubifs at91sam9_wdt.heartbeat=60" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "partition=nand0,5\0" \ - "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ - "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \ - "run ramargs;bootm 22000000\0" \ - "flashboot=run ramargs; nand read 0x22000000 0xA0000 " \ - "0x200000; bootm 0x22000000\0" \ - "basedir=" CONFIG_SYS_BASEDIR "\0" \ - "u-boot=u-boot-eukrea-cpu9260.bin\0" \ - "kernel=uImage-eukrea-cpu9260.bin\0" \ - "rootfs=image-eukrea-cpu9260.ubi\0" \ - "updtub=tftp ${loadaddr} $(basedir)/${u-boot}; " \ - "nand erase 20000 40000; " \ - "nand write ${loadaddr} 20000 40000\0" \ - "updtui=tftp ${loadaddr} $(basedir)/${kernel}; " \ - "nand erase a0000 200000; " \ - "nand write ${loadaddr} a0000 200000\0" \ - "updtrfs=tftp ${loadaddr} $(basedir)/${rootfs}; " \ - "nand erase 2a0000 fd60000; " \ - "nand write ${loadaddr} 2a0000 ${filesize}\0" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SILENT_CONSOLE -#define CONFIG_NETCONSOLE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ - GENERATED_GBL_DATA_SIZE) - -#endif diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h deleted file mode 100644 index 29cd842cec..0000000000 --- a/include/configs/cpuat91.h +++ /dev/null @@ -1,222 +0,0 @@ -/* - * CPUAT91 by (C) Copyright 2006-2010 Eric Benard - * eric@eukrea.com - * - * Configuration settings for the CPUAT91 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_CPUAT91_H -#define _CONFIG_CPUAT91_H - -#include <linux/sizes.h> - -#ifdef CONFIG_RAMBOOT -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0x21F00000 -#else -#define CONFIG_BOOTDELAY 1 -#define CONFIG_SYS_TEXT_BASE 0 -#endif - -#define AT91C_XTAL_CLOCK 18432000 -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) -#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) - -#define CONFIG_AT91RM9200 -#define CONFIG_CPUAT91 -#define USE_920T_MMU - -#include <asm/hardware.h> /* needed for port definitions */ - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_BOARD_EARLY_INIT_F - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR -/* flash */ -#define CONFIG_SYS_MC_PUIA_VAL 0x00000000 -#define CONFIG_SYS_MC_PUP_VAL 0x00000000 -#define CONFIG_SYS_MC_PUER_VAL 0x00000000 -#define CONFIG_SYS_MC_ASR_VAL 0x00000000 -#define CONFIG_SYS_MC_AASR_VAL 0x00000000 -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz for USB */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock */ - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as D16/D31 */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188C155 /* set up the SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID 0/* ignored in arm */ - -#undef CONFIG_HARD_I2C -#define AT91_PIN_SDA (1<<25) -#define AT91_PIN_SCL (1<<26) - -#define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 - -#define I2C_INIT i2c_init_board(); -#define I2C_ACTIVE writel(AT91_PMX_AA_TWD, &pio->pioa.mddr); -#define I2C_TRISTATE writel(AT91_PMX_AA_TWD, &pio->pioa.mder); -#define I2C_READ ((readl(&pio->pioa.pdsr) & AT91_PMX_AA_TWD) != 0) -#define I2C_SDA(bit) \ - if (bit) \ - writel(AT91_PMX_AA_TWD, &pio->pioa.sodr); \ - else \ - writel(AT91_PMX_AA_TWD, &pio->pioa.codr); -#define I2C_SCL(bit) \ - if (bit) \ - writel(AT91_PMX_AA_TWCK, &pio->pioa.sodr); \ - else \ - writel(AT91_PMX_AA_TWCK, &pio->pioa.codr); - -#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED) - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_CMD_CACHE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_DHCP - -#ifdef CONFIG_SYS_I2C_SOFT -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#endif - -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE (32 * 1024 * 1024) - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024) - -#define CONFIG_DRIVER_AT91EMAC -#define CONFIG_SYS_RX_ETH_BUFFER 16 -#define CONFIG_RMII -#define CONFIG_MII -#define CONFIG_DRIVER_AT91EMAC_PHYADDR 1 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_KS8721_PHY - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_PROTECTION -#define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define PHYS_FLASH_SIZE (16 * 1024 * 1024) -#define CONFIG_SYS_FLASH_BANKS_LIST \ - { PHYS_FLASH_1 } - -#if defined(CONFIG_CMD_USB) -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_AT91C_PQFP_UHPBU -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -#endif - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 128 * 1024) -#define CONFIG_ENV_SIZE (128 * 1024) -#define CONFIG_ENV_SECT_SIZE (128 * 1024) - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 4 * 1024) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_DEVICE_NULLDEV -#define CONFIG_SILENT_CONSOLE - -#define CONFIG_VERSION_VARIABLE - -#define MTDIDS_DEFAULT "nor0=physmap-flash.0" -#define MTDPARTS_DEFAULT \ - "mtdparts=physmap-flash.0:" \ - "128k(u-boot)ro," \ - "128k(u-boot-env)," \ - "1792k(kernel)," \ - "-(rootfs)" - -#define CONFIG_BOOTARGS \ - "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,115200" - -#define CONFIG_BOOTCOMMAND "run flashboot" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdid=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "flub=tftp 21000000 cpuat91/u-boot.bin; protect off 10000000 " \ - "1001FFFF; erase 10000000 1001FFFF; cp.b 21000000 " \ - "10000000 ${filesize}\0" \ - "flui=tftp 21000000 cpuat91/uImage; protect off 10040000 " \ - "1019ffff; erase 10040000 101fffff; cp.b 21000000 " \ - "10040000 ${filesize}\0" \ - "flrfs=tftp 21000000 cpuat91/rootfs.jffs2; protect off " \ - "10200000 10ffffff; erase 10200000 10ffffff; cp.b " \ - "21000000 10200000 ${filesize}\0" \ - "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ - "flashboot=run ramargs;bootm 10040000\0" \ - "netboot=run ramargs;tftpboot 21000000 cpuat91/uImage;" \ - "bootm 21000000\0" -#endif /* _CONFIG_CPUAT91_H */ diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h deleted file mode 100644 index 7ac3224e6e..0000000000 --- a/include/configs/da830evm.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com> - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_USE_SPIFLASH - -/* - * SoC Configuration - */ -#define CONFIG_MACH_DAVINCI_DA830_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA830 /* TI DA830 SoC */ -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0xc1080000 - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Start */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (32 << 20)) -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ - -/* - * I2C Configuration - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000 /* 100Kbps won't work, H/W bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ - -/* - * I2C EEPROM definitions for catalyst 24W256 EEPROM chip - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 - -/* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -/* - * Flash & Environment - */ -#ifdef CONFIG_USE_NAND -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_OFFSET (512 << 10) -#define CONFIG_ENV_SIZE (10 << 10) /* 10KB */ -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_CS 3 -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_MASK_CLE 0x10 -#define CONFIG_SYS_NAND_MASK_ALE 0x8 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#endif - -#ifdef CONFIG_USE_NOR -#define CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CONFIG_SYS_FLASH_SECT_SZ (64 << 10) /* 64KB */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3) -#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE -#define PHYS_FLASH_SIZE (32 << 20) /* Flash size 32MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ -#define CONFIG_SYS_FLASH_SPL_ACCESS -#endif - -#ifdef CONFIG_USE_SPIFLASH -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SIZE (16 << 10) -#define CONFIG_ENV_OFFSET (256 << 10) -#define CONFIG_ENV_SECT_SIZE 4096 -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SPI -#define CONFIG_SPI_FLASH_WINBOND -#define CONFIG_DAVINCI_SPI -#define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE -#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -#endif - -/* - * USB configuration - */ -#define CONFIG_USB_DA8XX /* Platform hookup to MUSB controller */ -#define CONFIG_USB_MUSB_HCD - -/* - * U-Boot general configuration - */ -#undef CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* - * Linux Information - */ -#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "" -#define CONFIG_BOOTDELAY 3 - -/* - * U-Boot commands - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING -#endif - -#ifdef CONFIG_USE_NAND -#define CONFIG_CMD_NAND -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#endif - -#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#endif - -/* SD/MMC configuration */ -#ifndef CONFIG_USE_NAND -#define CONFIG_MMC -#define CONFIG_DAVINCI_MMC_SD1 -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#endif - -/* - * Enable MMC commands only when - * MMC support is present - */ -#if defined(CONFIG_MMC) || defined(CONFIG_USB_DA8XX) -#define CONFIG_DOS_PARTITION /* include support for FAT/storage */ -#define CONFIG_CMD_FAT /* include support for FAT cmd */ -#endif - -#ifdef CONFIG_MMC -#define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT2 -#endif - -#if !defined(CONFIG_USE_NAND) && \ - !defined(CONFIG_USE_NOR) && \ - !defined(CONFIG_USE_SPIFLASH) -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_ENV -#endif - -#ifdef CONFIG_USB_DA8XX - -#ifdef CONFIG_USB_MUSB_HCD /* include support for usb host */ -#define CONFIG_CMD_USB /* include support for usb cmd */ - -#define CONFIG_USB_STORAGE /* MSC class support */ -#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */ - -#ifdef CONFIG_USB_KEYBOARD /* HID class support */ -#define CONFIG_SYS_USB_EVENT_POLL -#define CONFIG_PREBOOT "usb start" -#endif /* CONFIG_USB_KEYBOARD */ - -#endif /* CONFIG_USB_MUSB_HCD */ - -#ifdef CONFIG_USB_MUSB_UDC -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -/* Change these to suit your needs */ -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "DA830EVM" -#endif /* CONFIG_USB_MUSB_UDC */ - -#endif /* CONFIG_USB_DA8XX */ - -#ifdef CONFIG_MTD_PARTITIONS -#define MTDIDS_DEFAULT "nand0=davinci_nand.1" -#define PART_BOOT "512k(bootloader)ro," -#define PART_PARAMS "512k(params)ro," -#define PART_KERNEL "4m(kernel)," -#define PART_REST "-(filesystem)" -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h deleted file mode 100644 index 72296a03dd..0000000000 --- a/include/configs/davinci_dm355evm.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (C) 2009 David Brownell - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Spectrum Digital TMS320DM355 EVM board */ -#define DAVINCI_DM355EVM - -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SOC_DM355 - -/* Memory Info */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ - -/* Serial Driver info: UART0 for console */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Ethernet: external DM9000 */ -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x04014000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 2) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ - -/* NAND: socketed, two chipselects, normally 2 GBytes */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K - -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } -/* socket has two chipselects, nCE0 gated by address BIT(14) */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 2 - -/* SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#define CONFIG_DAVINCI_MMC_SD1 -#define CONFIG_MMC_MBLOCK - -/* USB: OTG connector */ -/* NYET -- #define CONFIG_USB_DAVINCI */ - -/* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC -#endif - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#endif - -#ifdef CONFIG_USB_DAVINCI -#define CONFIG_USB_MUSB_HCD -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#else -#undef CONFIG_USB_MUSB_HCD -#undef CONFIG_CMD_USB -#undef CONFIG_USB_STORAGE -#endif - -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x3C0000 -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_CMD_ENV -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ -#define CONFIG_ENV_IS_IN_MMC -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTCOMMAND \ - "dhcp;bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200n8 " \ - "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro" - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP - -#define CONFIG_NET_RETRY_COUNT 10 - -/* U-Boot memory configuration */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ -#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ - - -/* NAND configuration ... socketed with two chipselects. It normally comes - * with a 2GByte SLC part with 2KB pages (and 128KB erase blocks); other - * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC. (MLC - * pretty much demands the 4-bit ECC support.) You can of course swap in - * other parts, including small page ones. - * - * This presents a single read-only partition for all bootloader stuff. - * UBL (1+ block), U-Boot (256KB+), U-Boot environment (one block), and - * some extra space to help cope with bad blocks in that data. Linux - * shouldn't care about its detailed layout, and will probably want to use - * UBI/UBFS for the rest (except maybe on smallpage chips). It's easy to - * override this default partitioning using MTDPARTS and cmdlinepart. - */ -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" - -#ifdef CONFIG_SYS_NAND_LARGEPAGE -/* Use same layout for 128K/256K blocks; allow some bad blocks */ -#define PART_BOOT "2m(bootloader)ro," -#else -/* Assume 16K erase blocks; allow a few bad ones. */ -#define PART_BOOT "512k(bootloader)ro," -#endif - -#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ -#define PART_REST "-(filesystem)" - -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h deleted file mode 100644 index e3ff9431dc..0000000000 --- a/include/configs/davinci_dm355leopard.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define DAVINCI_DM355LEOPARD - -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SOC_DM355 /* DM355 based board */ - -/* Memory Info */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ - -/* Serial Driver info: UART0 for console */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Ethernet: external DM9000 */ -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x04000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 16) - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 - -/* NAND */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_HW_ECC - -#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#endif - -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x3C0000 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OVERWRITE -#endif - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND "dhcp;bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200n8 " \ - "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro" - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP - -#define CONFIG_NET_RETRY_COUNT 10 - -/* U-Boot memory configuration */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ -#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ - -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" - -#ifdef CONFIG_SYS_NAND_LARGEPAGE -#define PART_BOOT "2m(bootloader)ro," -#else -/* Assume 16K erase blocks; allow a few bad ones. */ -#define PART_BOOT "512k(bootloader)ro," -#endif - -#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ -#define PART_REST "-(filesystem)" - -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h deleted file mode 100644 index bbc801b4db..0000000000 --- a/include/configs/davinci_dm365evm.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Spectrum Digital TMS320DM365 EVM board */ -#define DAVINCI_DM365EVM - -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SOC_DM365 - -/* Memory Info */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* 128 MiB */ - -/* Serial Driver info: UART0 for console */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* EEPROM definitions for EEPROM on DM365 EVM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 - -/* Network Configuration */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ - -/* NAND: socketed, two chipselects, normally 2 GBytes */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K - -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } -/* socket has two chipselects, nCE0 gated by address BIT(14) */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 2 - -/* SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#define CONFIG_DAVINCI_MMC_SD1 -#define CONFIG_MMC_MBLOCK - -#define PINMUX4_USBDRVBUS_BITCLEAR 0x3000 -#define PINMUX4_USBDRVBUS_BITSET 0x2000 - -/* USB Configuration */ -#define CONFIG_USB_DAVINCI -#define CONFIG_USB_MUSB_HCD - -#ifdef CONFIG_USB_DAVINCI -#define CONFIG_CMD_USB /* include support for usb */ -#define CONFIG_CMD_STORAGE /* include support for usb */ -#define CONFIG_CMD_FAT /* include support for FAT/storage*/ -#define CONFIG_DOS_PARTITION /* include support for FAT/storage*/ -#endif - -#ifdef CONFIG_USB_MUSB_HCD /* include support for usb host */ -#define CONFIG_CMD_USB /* include support for usb cmd */ -#define CONFIG_USB_STORAGE /* MSC class support */ -#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */ -#define CONFIG_CMD_FAT /* inclue support for FAT/storage */ -#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */ - -#ifdef CONFIG_USB_KEYBOARD /* HID class support */ -#define CONFIG_SYS_USB_EVENT_POLL - -#define CONFIG_PREBOOT "usb start" -#endif /* CONFIG_USB_KEYBOARD */ -#endif /* CONFIG_USB_MUSB_HCD */ - -#ifdef CONFIG_USB_MUSB_UDC -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "DM365VM" -#endif /* CONFIG_USB_MUSB_UDC */ - -/* U-Boot command configuration */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC -#endif - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#endif - -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* U-Boot general configuration */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP - -#ifdef CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x3C0000 -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_CMD_ENV -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ -#define CONFIG_ENV_IS_IN_MMC -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND \ - "dhcp;bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200n8 " \ - "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro" - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP - -/* U-Boot memory configuration */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ -#define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ - - -/* NAND configuration issocketed with two chipselects just like the DM355 EVM. - * It normally comes with a 2GByte SLC part with 2KB pages - * (and 128KB erase blocks); other - * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC. (MLC - * pretty much demands the 4-bit ECC support.) You can of course swap in - * other parts, including small page ones. - */ -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" - -#ifdef CONFIG_SYS_NAND_LARGEPAGE -/* Use same layout for 128K/256K blocks; allow some bad blocks */ -#define PART_BOOT "2m(bootloader)ro," -#else -/* Assume 16K erase blocks; allow a few bad ones. */ -#define PART_BOOT "512k(bootloader)ro," -#endif - -#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ -#define PART_REST "-(filesystem)" - -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h deleted file mode 100644 index 6346422b49..0000000000 --- a/include/configs/davinci_dm6467evm.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Spectrum Digital TMS320DM6467 EVM board */ -#define DAVINCI_DM6467EVM -#define CONFIG_SYS_USE_NAND -#define CONFIG_SYS_NAND_SMALLPAGE - -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* SoC Configuration */ - -/* Clock rates detection */ -#ifndef __ASSEMBLY__ -extern unsigned int davinci_arm_clk_get(void); -#endif - -/* Arm Clock frequency */ -#define CONFIG_SYS_CLK_FREQ davinci_arm_clk_get() -/* Timer Input clock freq */ -#define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2) -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SOC_DM646X - -/* EEPROM definitions for EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 - -/* Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE (256 << 20) /* DDR size 256MB */ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_BARGSIZE 1024 /* Bootarg Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ -#define CONFIG_REVISION_TAG - -/* Serial Driver info */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 4 -#define CONFIG_SYS_NS16550_COM1 0x01c20000 -#define CONFIG_SYS_NS16550_CLK 24000000 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* I2C Configuration */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 - -/* Network & Ethernet Configuration */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 - -/* Flash & Environment */ -#define CONFIG_SYS_NO_FLASH -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_MASK_CLE 0x80000 -#define CONFIG_SYS_NAND_MASK_ALE 0x40000 -#define CONFIG_SYS_NAND_CS 2 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_SYS_NAND_BASE_LIST {0x42000000, } -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_ENV_OFFSET 0 -#else -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE (4 << 10) /* 4 KiB */ -#endif - -/* U-Boot general configuration */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_BOOTCOMMAND "source 0x82080000; dhcp; bootm" -#define CONFIG_BOOTARGS \ - "mem=120M console=ttyS0,115200n8 " \ - "root=/dev/hda1 rw noinitrd ip=dhcp" - -/* U-Boot commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_CMD_NAND -#endif - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h deleted file mode 100644 index 15d815084b..0000000000 --- a/include/configs/davinci_dvevm.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Define this to make U-Boot skip low level initialization when loaded - * by initial bootloader. Not required by NAND U-Boot version but IS - * required for a NOR version used to burn the real NOR U-Boot into - * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive - * so it is NOT possible to build a U-Boot with both NAND and NOR routines. - * NOR U-Boot is loaded directly from Flash so it must perform all the - * low level initialization itself. NAND version is loaded by an initial - * bootloader (UBL in TI-ese) that performs such an initialization so it's - * skipped in NAND version. The third DaVinci boot mode loads a bootloader - * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) - * performing low level init prior to loading. All that means we can NOT use - * NAND version to put U-Boot into NOR because it doesn't have NOR support and - * we can NOT use NOR version because it performs low level initialization - * effectively destroying itself in DDR memory. That's why a separate NOR - * version with this define is needed. It is loaded via UART, then one uses - * it to somehow download a proper NOR version built WITHOUT this define to - * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze - * NOR support into the initial bootloader so it won't be needed but DaVinci - * static RAM might be too small for this (I have something like 2Kbytes left - * as of now, without NOR support) so this might've not happened... - * -#define CONFIG_NOR_UART_BOOT - */ - -/*=======*/ -/* Board */ -/*=======*/ -#define DV_EVM -#define CONFIG_SYS_NAND_SMALLPAGE -#define CONFIG_SYS_USE_NAND -/*===================*/ -/* SoC Configuration */ -/*===================*/ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/*====================================================*/ -/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ -/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ -/*====================================================*/ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -/*=============*/ -/* Memory Info */ -/*=============*/ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ - -#define DDR_8BANKS /* 8-bank DDR2 (256MB) */ -/*====================*/ -/* Serial Driver info */ -/*====================*/ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/*===================*/ -/* I2C Configuration */ -/*===================*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ -/* Network & Ethernet Configuration */ -/*==================================*/ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -/*=====================*/ -/* Flash & Environment */ -/*=====================*/ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#ifdef CONFIG_SYS_NAND_SMALLPAGE -#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT \ - "nand0=davinci_nand.0" -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.0:384k(bootloader)ro,4m(kernel),-(filesystem)" -#else -#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#endif -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#elif defined(CONFIG_SYS_USE_NOR) -#ifdef CONFIG_NOR_UART_BOOT -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#else -#undef CONFIG_SKIP_LOWLEVEL_INIT -#endif -#define CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_SYS_NO_FLASH -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3) -#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ -#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ /* Env sector Size */ -#endif -/*==============================*/ -/* U-Boot general configuration */ -/*==============================*/ -#define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_USB_MUSB_HCD -#define CONFIG_USB_DAVINCI -/*===================*/ -/* Linux Information */ -/*===================*/ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2050000" -/*=================*/ -/* U-Boot commands */ -/*=================*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_EEPROM - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_CMD_NAND -#elif defined(CONFIG_SYS_USE_NOR) -#define CONFIG_CMD_JFFS2 -#else -#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!" -#endif -/*==========================*/ -/* USB MSC support (if any) */ -/*==========================*/ -#ifdef CONFIG_USB_DAVINCI -#define CONFIG_CMD_USB -#ifdef CONFIG_USB_MUSB_HCD -#define CONFIG_USB_STORAGE -#define CONFIG_CMD_STORAGE -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif -#ifdef CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL -#define CONFIG_PREBOOT "usb start" -#endif -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h deleted file mode 100644 index bc5e1ca697..0000000000 --- a/include/configs/davinci_schmoogie.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*=======*/ -/* Board */ -/*=======*/ -#define SCHMOOGIE -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_USE_NAND -#define MACH_TYPE_SCHMOOGIE 1255 -#define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE - -/*===================*/ -/* SoC Configuration */ -/*===================*/ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/*=============*/ -/* Memory Info */ -/*=============*/ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/*====================*/ -/* Serial Driver info */ -/*====================*/ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/*===================*/ -/* I2C Configuration */ -/*===================*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ -/* Network & Ethernet Configuration */ -/*==================================*/ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_OVERWRITE_ETHADDR_ONCE -/*=====================*/ -/* Flash & Environment */ -/*=====================*/ -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -/*=====================*/ -/* Board related stuff */ -/*=====================*/ -#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */ -#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */ -#define CONFIG_SYS_UID_ADDR 0x50 /* UID chip I2C address */ -/*==============================*/ -/* U-Boot general configuration */ -/*==============================*/ -#define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -/*===================*/ -/* Linux Information */ -/*===================*/ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot" -/*=================*/ -/* U-Boot commands */ -/*=================*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NAND -#undef CONFIG_CMD_EEPROM - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h deleted file mode 100644 index e719388722..0000000000 --- a/include/configs/davinci_sffsdr.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Copyright (C) 2008 Lyrtech <www.lyrtech.com> - * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Board */ -#define SFFSDR -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_USE_NAND -#define CONFIG_SYS_USE_DSPLINK /* don't power up the DSP. */ -/* SoC Configuration */ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/* EEPROM definitions for Atmel 24LC64 EEPROM chip */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -/* Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/* Serial Driver info */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/* I2C Configuration */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/* Network & Ethernet Configuration */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_OVERWRITE_ETHADDR_ONCE -/* Flash & Environment */ -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -/* I2C switch definitions for PCA9543 chip */ -#define CONFIG_SYS_I2C_PCA9543_ADDR 0x70 -#define CONFIG_SYS_I2C_PCA9543_ADDR_LEN 0 /* Single register. */ -#define CONFIG_SYS_I2C_PCA9543_ENABLE_CH0 0x01 /* Enable channel 0. */ -/* U-Boot general configuration */ -#define CONFIG_MISC_INIT_R -#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds. */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* Default Linux kernel - * load address. */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, - * may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -/* Linux Information */ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS \ - "mem=56M " \ - "console=ttyS0,115200n8 " \ - "root=/dev/nfs rw noinitrd ip=dhcp " \ - "nfsroot=${serverip}:/nfsroot/sffsdr " \ - "eth0=${ethaddr}" -#define CONFIG_BOOTCOMMAND \ - "nand read 87A00000 100000 300000;" \ - "bootelf 87A00000" -/* U-Boot commands */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_NAND -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF /* Needed to load Integrity kernel. */ - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h deleted file mode 100644 index b85c988b5d..0000000000 --- a/include/configs/davinci_sonata.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Define this to make U-Boot skip low level initialization when loaded - * by initial bootloader. Not required by NAND U-Boot version but IS - * required for a NOR version used to burn the real NOR U-Boot into - * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive - * so it is NOT possible to build a U-Boot with both NAND and NOR routines. - * NOR U-Boot is loaded directly from Flash so it must perform all the - * low level initialization itself. NAND version is loaded by an initial - * bootloader (UBL in TI-ese) that performs such an initialization so it's - * skipped in NAND version. The third DaVinci boot mode loads a bootloader - * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever) - * performing low level init prior to loading. All that means we can NOT use - * NAND version to put U-Boot into NOR because it doesn't have NOR support and - * we can NOT use NOR version because it performs low level initialization - * effectively destroying itself in DDR memory. That's why a separate NOR - * version with this define is needed. It is loaded via UART, then one uses - * it to somehow download a proper NOR version built WITHOUT this define to - * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze - * NOR support into the initial bootloader so it won't be needed but DaVinci - * static RAM might be too small for this (I have something like 2Kbytes left - * as of now, without NOR support) so this might've not happened... - * -#define CONFIG_NOR_UART_BOOT - */ - -/*=======*/ -/* Board */ -/*=======*/ -#define SONATA_BOARD -#define CONFIG_SYS_NAND_SMALLPAGE -#define CONFIG_SYS_USE_NOR -#define MACH_TYPE_SONATA 1254 -#define CONFIG_MACH_TYPE MACH_TYPE_SONATA -/*===================*/ -/* SoC Configuration */ -/*===================*/ -#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SOC_DM644X -/*====================================================*/ -/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ -/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ -/*====================================================*/ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -/*=============*/ -/* Memory Info */ -/*=============*/ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ -#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ -#define DDR_4BANKS /* 4-bank DDR2 (128MB) */ -/*====================*/ -/* Serial Driver info */ -/*====================*/ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ -#define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -/*===================*/ -/* I2C Configuration */ -/*===================*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ -/* Network & Ethernet Configuration */ -/*==================================*/ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -/*=====================*/ -/* Flash & Environment */ -/*=====================*/ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_CS 2 -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_OVERWRITE /* instead if obsoleted forceenv() */ -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SYS_NAND_BASE 0x02000000 -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#elif defined(CONFIG_SYS_USE_NOR) -#ifdef CONFIG_NOR_UART_BOOT -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#else -#undef CONFIG_SKIP_LOWLEVEL_INIT -#endif -#define CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_SYS_NO_FLASH -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*2) -#define CONFIG_ENV_SIZE CONFIG_SYS_FLASH_SECT_SZ -#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ -#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ /* Env sector Size */ -#endif -/*==============================*/ -/* U-Boot general configuration */ -/*==============================*/ -#define CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print buffer sz */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -/*===================*/ -/* Linux Information */ -/*===================*/ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2060000" -/*=================*/ -/* U-Boot commands */ -/*=================*/ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_EEPROM -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_CMD_NAND -#elif defined(CONFIG_SYS_USE_NOR) -#define CONFIG_CMD_JFFS2 -#else -#error "Either CONFIG_SYS_USE_NAND or CONFIG_SYS_USE_NOR _MUST_ be defined !!!" -#endif - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/dig297.h b/include/configs/dig297.h deleted file mode 100644 index 98205adde0..0000000000 --- a/include/configs/dig297.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * (C) Copyright 2011 Comelit Group SpA - * Luca Ceresoli <luca.ceresoli@comelit.it> - * - * Based on omap3_beagle.h: - * (C) Copyright 2006-2008 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <x0khasim@ti.com> - * - * Configuration settings for the Comelit DIG297 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/mach-types.h> -#ifdef MACH_TYPE_OMAP3_CPS -#error "MACH_TYPE_OMAP3_CPS has been defined properly, please remove this." -#else -#define MACH_TYPE_OMAP3_CPS 2751 -#endif -#define CONFIG_MACH_TYPE MACH_TYPE_OMAP3_CPS -/* Common ARM Erratas */ -#define CONFIG_ARM_ERRATA_454179 -#define CONFIG_ARM_ERRATA_430973 -#define CONFIG_ARM_ERRATA_621766 - -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP_COMMON - -#define CONFIG_SYS_TEXT_BASE 0x80008000 - -#define CONFIG_SDRC /* The chip has SDRC controller */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h> - -/* - * Display CPU and Board information - */ -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* UBI needs >= 512 kB */ - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration: UART3 (ttyO2) - */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION - -/* library portions to compile in */ -#define CONFIG_RBTREE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_LZO - -/* commands to include */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_UBI /* UBI Support */ -#define CONFIG_CMD_UBIFS /* UBIFS Support */ -#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nand0=omap2-nand.0" -#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:896k(uboot),"\ - "128k(uboot-env),3m(kernel),252m(ubi)" - -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_NAND /* NAND support */ - -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX - -/* - * TWL4030 - */ -#define CONFIG_TWL4030_POWER -#define CONFIG_TWL4030_LED - -/* - * Board NAND Info. - */ -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_BUSWIDTH_16BIT -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ - /* to access nand */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access nand at */ - /* CS0 */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ - -#if defined(CONFIG_CMD_NET) -/* - * SMSC9220 Ethernet - */ - -#define CONFIG_SMC911X -#define CONFIG_SMC911X_32_BIT -#define CONFIG_SMC911X_BASE 0x2C000000 - -#endif /* (CONFIG_CMD_NET) */ - -/* Environment information */ -#define CONFIG_BOOTDELAY 1 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyO2,115200n8\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "partition=nand0,3\0"\ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "nandroot=ubi0:rootfs ro\0" \ - "nandrootfstype=ubifs\0" \ - "nfspath=/srv/nfs\0" \ - "tftpfilename=uImage\0" \ - "gatewayip=0.0.0.0\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${mtdparts} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}::off\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${mtdparts} " \ - "ubi.mtd=3 " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}::off\0" \ - "netargs=setenv bootargs console=${console} " \ - "${mtdparts} " \ - "root=/dev/nfs rw " \ - "nfsroot=${serverip}:${nfspath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}::off\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${loadaddr} 100000 300000; " \ - "bootm ${loadaddr}\0" \ - "netboot=echo Booting from network ...; " \ - "run netargs; " \ - "tftp ${loadaddr} ${serverip}:${tftpfilename}; " \ - "bootm ${loadaddr}\0" \ - "resetenv=nand erase e0000 20000\0"\ - -#define CONFIG_BOOTCOMMAND \ - "run nandboot" - -#define CONFIG_AUTO_COMPLETE -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ - /* works on */ -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000) /* 31MB */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ - /* load address */ - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#define CONFIG_SYS_FLASH_BASE boot_flash_base - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE - -#define CONFIG_ENV_IS_IN_NAND -#define SMNAND_ENV_OFFSET 0x0E0000 /* environment starts here */ - -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/e2220-1170.h b/include/configs/e2220-1170.h index dff3f2a357..998a69aba1 100644 --- a/include/configs/e2220-1170.h +++ b/include/configs/e2220-1170.h @@ -13,7 +13,6 @@ #include "tegra210-common.h" /* High-level configuration options */ -#define V_PROMPT "Tegra210 (E2220-1170) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA E2220-1170" /* Board-specific serial config */ @@ -60,6 +59,4 @@ #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" -#define COUNTER_FREQUENCY 38400000 - #endif /* _E2220_1170_H */ diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h deleted file mode 100644 index d27f7e0452..0000000000 --- a/include/configs/eb_cpux9k2.h +++ /dev/null @@ -1,400 +0,0 @@ -/* - * (C) Copyright 2008-2009 - * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de> - * Jens Scharsig <esw@bus-elektronik.de> - * - * Configuation settings for the EB+CPUx9K2 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_EB_CPUx9K2_H_ -#define _CONFIG_EB_CPUx9K2_H_ - -/*--------------------------------------------------------------------------*/ - -#define CONFIG_AT91RM9200 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_EB_CPUX9K2 /* on an EP+CPUX9K2 Board */ -#define USE_920T_MMU - -#define CONFIG_VERSION_VARIABLE -#define CONFIG_IDENT_STRING " on EB+CPUx9K2" - -#include <asm/hardware.h> /* needed for port definitions */ - -#define CONFIG_MISC_INIT_R -#define CONFIG_BOARD_EARLY_INIT_F - -#define MACH_TYPE_EB_CPUX9K2 1977 -#define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 - -#define CONFIG_SYS_CACHELINE_SIZE 32 -#define CONFIG_SYS_DCACHE_OFF - -/*--------------------------------------------------------------------------*/ -#ifndef CONFIG_RAMBOOT -#define CONFIG_SYS_TEXT_BASE 0x00000000 -#else -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0x21800000 -#endif -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ -#define CONFIG_STANDALONE_LOAD_ADDR 0x21000000 - -#define CONFIG_BOOT_RETRY_TIME 30 -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -/* - * ARM asynchronous clock - */ - -#define AT91C_MAIN_CLOCK 179404800 /* from 12.288 MHz * 73 / 5 */ -#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) - -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20483E05 /* 179.4048 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x104C3E0A /* 47.3088 MHz (for USB) */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Clock */ - -/* - * Size of malloc() pool - */ - -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - -/* - * sdram - */ - -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ -#define CONFIG_SYS_INIT_SP_ADDR 0x00204000 /* use internal SRAM */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - CONFIG_SYS_SDRAM_SIZE - 0x00400000 - \ - CONFIG_SYS_MALLOC_LEN) - -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* PIOC as D16/D31 */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188c159 /* set up the SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ - -/* - * Command line configuration - */ -#define CONFIG_CMD_BMP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_I2C_CMD_TREE -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT -#define CONFIG_CMD_UBI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_UBIFS - -#define CONFIG_SYS_LONGHELP - -/* - * MTD defines - */ - -#define CONFIG_FLASH_CFI_MTD -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_RBTREE -#define CONFIG_LZO - -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" -#define MTDPARTS_DEFAULT "mtdparts=" \ - "physmap-flash.0:" \ - "512k(U-Boot)," \ - "128k(Env)," \ - "128k(Splash)," \ - "4M(Kernel)," \ - "384k(MiniFS)," \ - "-(FS)" \ - ";" \ - "atmel_nand:" \ - "1M(emergency)," \ - "-(data)" -/* - * Hardware drivers - */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_AT91C_PQFP_UHPBUG -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION -#define CONFIG_EFI_PARTITION - -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" - -/* - * UART/CONSOLE - */ - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID 0/* ignored in arm */ - -/* - * network - */ - -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_RESET_PHY_R 1 - -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_DRIVER_AT91EMAC_QUIET 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#define CONFIG_MII 1 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * I2C-Bus - */ - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0 - -/* Software I2C driver configuration */ - -#define AT91_PIN_SDA (1<<25) /* AT91C_PIO_PA25 */ -#define AT91_PIN_SCL (1<<26) /* AT91C_PIO_PA26 */ - -#define CONFIG_SYS_I2C_INIT_BOARD - -#define I2C_INIT i2c_init_board(); -#define I2C_ACTIVE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mddr); -#define I2C_TRISTATE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mder); -#define I2C_READ ((readl(&pio->pioa.pdsr) & ATMEL_PMX_AA_TWD) != 0) -#define I2C_SDA(bit) \ - if (bit) \ - writel(ATMEL_PMX_AA_TWD, &pio->pioa.sodr); \ - else \ - writel(ATMEL_PMX_AA_TWD, &pio->pioa.codr); -#define I2C_SCL(bit) \ - if (bit) \ - writel(ATMEL_PMX_AA_TWCK, &pio->pioa.sodr); \ - else \ - writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr); - -#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SOFT_SPEED) - -/* I2C-RTC */ - -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_DS1338 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#endif - -/* EEPROM */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 - -/* FLASH organization */ - -/* NOR-FLASH */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 - -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x01000000 /* 16 megs main flash */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_FLASH_PROTECTION 1 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 512 -#define CONFIG_SYS_FLASH_ERASE_TOUT 6000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 2000 - -/* NAND */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 - -/* Status LED's */ - -#define CONFIG_STATUS_LED 1 -#define CONFIG_BOARD_SPECIFIC_LED 1 - -#define STATUS_LED_BOOT 1 -#define STATUS_LED_ACTIVE 0 - -#define STATUS_LED_BIT 1 /* AT91C_PIO_PD0 green LED */ -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_STATE STATUS_LED_OFF /* BLINKING */ -#define STATUS_LED_BIT1 2 /* AT91C_PIO_PD1 red LED */ -#define STATUS_LED_STATE1 STATUS_LED_ON /* BLINKING */ -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 4) - -#define CONFIG_VIDEO 1 - -/* Options */ - -#ifdef CONFIG_VIDEO - -#define CONFIG_VIDEO_VCXK 1 - -#define CONFIG_SPLASH_SCREEN 1 - -#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 4 -#define CONFIG_SYS_VCXK_BASE 0x30000000 - -#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN (1<<3) -#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT piob -#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR odr - -#define CONFIG_SYS_VCXK_ENABLE_PIN (1<<5) -#define CONFIG_SYS_VCXK_ENABLE_PORT piob -#define CONFIG_SYS_VCXK_ENABLE_DDR oer - -#define CONFIG_SYS_VCXK_REQUEST_PIN (1<<2) -#define CONFIG_SYS_VCXK_REQUEST_PORT piob -#define CONFIG_SYS_VCXK_REQUEST_DDR oer - -#define CONFIG_SYS_VCXK_INVERT_PIN (1<<4) -#define CONFIG_SYS_VCXK_INVERT_PORT piob -#define CONFIG_SYS_VCXK_INVERT_DDR oer - -#define CONFIG_SYS_VCXK_RESET_PIN (1<<6) -#define CONFIG_SYS_VCXK_RESET_PORT piob -#define CONFIG_SYS_VCXK_RESET_DDR oer - -#endif /* CONFIG_VIDEO */ - -/* Environment */ - -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x80000) -#define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTCOMMAND "run nfsboot" - -#define CONFIG_NFSBOOTCOMMAND \ - "dhcp $(copy_addr) uImage_cpux9k2;" \ - "run bootargsdefaults;" \ - "set bootargs $(bootargs) boot=nfs " \ - ";echo $(bootargs)" \ - ";bootm" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "displaywidth=256\0" \ - "displayheight=512\0" \ - "displaybsteps=1023\0" \ - "ubootaddr=10000000\0" \ - "splashimage=100A0000\0" \ - "kerneladdr=100C0000\0" \ - "kernelsize=00400000\0" \ - "rootfsaddr=10520000\0" \ - "copy_addr=21200000\0" \ - "rootfssize=00AE0000\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "bootargsdefaults=set bootargs " \ - "console=ttyS0,115200 " \ - "video=vcxk_fb:xres:${displaywidth}," \ - "yres:${displayheight}," \ - "bres:${displaybsteps} " \ - "mem=62M " \ - "panic=10 " \ - "uboot=\\\"${ver}\\\" " \ - "\0" \ - "update_kernel=protect off $(kerneladdr) +$(kernelsize);" \ - "dhcp $(copy_addr) uImage_cpux9k2;" \ - "erase $(kerneladdr) +$(kernelsize);" \ - "cp.b $(fileaddr) $(kerneladdr) $(filesize);" \ - "protect on $(kerneladdr) +$(kernelsize)" \ - "\0" \ - "update_root=protect off $(rootfsaddr) +$(rootfssize);" \ - "dhcp $(copy_addr) rfs;" \ - "erase $(rootfsaddr) +$(rootfssize);" \ - "cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \ - "\0" \ - "update_uboot=protect off 10000000 1007FFFF;" \ - "dhcp $(copy_addr) u-boot_eb_cpux9k2;" \ - "erase 10000000 1007FFFF;" \ - "cp.b $(fileaddr) $(ubootaddr) $(filesize);" \ - "protect on 10000000 1007FFFF;reset\0" \ - "update_splash=protect off $(splashimage) +20000;" \ - "dhcp $(copy_addr) splash_eb_cpux9k2.bmp;" \ - "erase $(splashimage) +20000;" \ - "cp.b $(fileaddr) $(splashimage) $(filesize);" \ - "protect on $(splashimage) +20000;reset\0" \ - "emergency=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=emergency " \ - ";bootm $(kerneladdr)\0" \ - "netemergency=run bootargsdefaults;" \ - "dhcp $(copy_addr) uImage_cpux9k2;" \ - "set bootargs $(bootargs) root=initramfs boot=emergency " \ - ";bootm $(copy_addr)\0" \ - "norboot=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=local " \ - ";bootm $(kerneladdr)\0" \ - "nandboot=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=nand " \ - ";bootm $(kerneladdr)\0" \ - " " - -/*--------------------------------------------------------------------------*/ - -#endif - -/* EOF */ diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index efe2a9daa7..e3e32aa081 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -25,6 +25,8 @@ #error "no board defined" #endif +#define CONFIG_SYS_GENERIC_BOARD + /* Initial environment and monitor configuration options. */ #define CONFIG_BOOTDELAY 2 #define CONFIG_CMDLINE_TAG 1 diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 12744a6143..f55ba9f706 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -19,7 +19,7 @@ #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) -#define CONFIG_IMX6_THERMAL +#define CONFIG_IMX_THERMAL /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) @@ -33,6 +33,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h deleted file mode 100644 index 141489d179..0000000000 --- a/include/configs/enbw_cmc.h +++ /dev/null @@ -1,440 +0,0 @@ -/* - * (C) Copyright 2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 7 -#define CONFIG_USE_NAND - -/* - * SoC Configuration - */ -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ -#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_DA850_LOWLEVEL -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_DA850_PLL_INIT -#define CONFIG_SYS_DA850_DDR_INIT -#define CONFIG_DA8XX_GPIO -#define CONFIG_HOSTNAME enbw_cmc - -#define MACH_TYPE_ENBW_CMC 3585 -#define CONFIG_MACH_TYPE MACH_TYPE_ENBW_CMC - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ -#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ - -/* memtest start addr */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) - -/* memtest will be run on 16MB */ -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ - -/* - * I2C Configuration - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 -#define CONFIG_CMD_I2C - -#define CONFIG_CMD_DTT -#define CONFIG_DTT_LM75 -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 - -/* - * SPI Configuration - */ -#define CONFIG_DAVINCI_SPI -#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE -#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) -#define CONFIG_CMD_SPI - -/* - * Flash & Environment - */ -#ifdef CONFIG_USE_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_CS 3 -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_SYS_NAND_MASK_CLE 0x10 -#define CONFIG_SYS_NAND_MASK_ALE 0x8 -#undef CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ - -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=davinci_nand.1" -#define MTDPARTS_DEFAULT \ - "mtdparts=" \ - "physmap-flash.0:" \ - "512k(U-Boot)," \ - "64k(env1)," \ - "64k(env2)," \ - "-(rest);" \ - "davinci_nand.1:" \ - "128k(dtb)," \ - "3m(kernel)," \ - "4m(rootfs)," \ - "-(userfs)" - - -#define CONFIG_CMD_MTDPARTS - -#endif - -/* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_FLASH_CFI_MTD -#define CONFIG_SYS_FLASH_BASE 0x60000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_FLASH_16BIT /* Flash is 16-bit */ - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_SYS_MONITOR_LEN 0x80000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE (64 << 10) -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#undef CONFIG_ENV_IS_IN_NAND -#define CONFIG_DEFAULT_SETTINGS_ADDR (CONFIG_ENV_ADDR_REDUND + \ - CONFIG_ENV_SECT_SIZE) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr_r=c0000000\0" \ - "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};"\ - "erase " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};" \ - "cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_FLASH_BASE) \ - " ${filesize};" \ - "protect on " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize}\0"\ - "netdev=eth0\0" \ - "rootpath=/opt/eldk-arm/arm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "kernel_addr_r=c0700000\0" \ - "fdt_addr_r=c0600000\0" \ - "ramdisk_addr_r=c0b00000\0" \ - "fdt_file=" __stringify(CONFIG_HOSTNAME) "/" \ - __stringify(CONFIG_HOSTNAME) ".dtb\0" \ - "kernel_file=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \ - "nand_ld_ramdsk=nand read ${ramdisk_addr_r} 320000 400000\0" \ - "nand_ld_kernel=nand read ${kernel_addr_r} 20000 300000\0" \ - "nand_ld_fdt=nand read ${fdt_addr_r} 0 2000\0" \ - "load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \ - "load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \ - "load_nand=run nand_ld_ramdsk nand_ld_kernel nand_ld_fdt\0" \ - "addcon=setenv bootargs ${bootargs} console=ttyS2," \ - "${baudrate}n8\0" \ - "net_nfs=run load_fdt load_kernel; " \ - "run nfsargs addip addcon addmtd addmisc;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "nand_selfnand=run load_nand ramargs addip addcon addmisc;bootm "\ - "${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \ - "bootcmd=run net_nfs\0" \ - "machid=e01\0" \ - "key_cmd_0=echo key: 0\0" \ - "key_cmd_1=echo key: 1\0" \ - "key_cmd_2=echo key: 2\0" \ - "key_cmd_3=echo key: 3\0" \ - "key_magic_0=0\0" \ - "key_magic_1=1\0" \ - "key_magic_2=2\0" \ - "key_magic_3=3\0" \ - "magic_keys=0123\0" \ - "hwconfig=switch:lan=on,pwl=off,config=0x60100000\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addmisc=setenv bootargs ${bootargs}\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "logversion=2\0" \ - "\0" - -/* - * U-Boot general configuration - */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_BOOTDELAY 3 -#define CONFIG_HWCONFIG -#define CONFIG_SHOW_BOOT_PROGRESS -#define CONFIG_BOARD_LATE_INIT - -/* - * U-Boot commands - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_CACHE - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING -#endif - -#ifdef CONFIG_USE_NAND -#define CONFIG_CMD_NAND - -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_LZO -#define CONFIG_RBTREE -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#endif - -#if !defined(CONFIG_USE_NAND) && \ - !defined(CONFIG_USE_NOR) && \ - !defined(CONFIG_USE_SPIFLASH) -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_ENV -#endif - -#define CONFIG_SYS_TEXT_BASE 0x60000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_SDRAM_BASE 0xc0000000 -#define CONFIG_SYS_INIT_SP_ADDR (0x8001ff00) - -#define CONFIG_VERSION_VARIABLE -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMC_RESET_PIN 0x04000000 -#define CONFIG_CMC_RESET_TIMEOUT 3 - -#define CONFIG_HW_WATCHDOG -#define CONFIG_SYS_WDTTIMERBASE DAVINCI_TIMER1_BASE -#define CONFIG_SYS_WDT_PERIOD_LOW 0x0c000000 -#define CONFIG_SYS_WDT_PERIOD_HIGH 0x0 - -#define CONFIG_CMD_DATE -#define CONFIG_RTC_DAVINCI - -/* SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#define CONFIG_MMC_MBLOCK -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MMC - -/* GPIO */ -#define CONFIG_ENBW_CMC_BOARD_TYPE 57 -#define CONFIG_ENBW_CMC_HW_ID_BIT0 39 -#define CONFIG_ENBW_CMC_HW_ID_BIT1 38 -#define CONFIG_ENBW_CMC_HW_ID_BIT2 35 - -/* FDT support */ -#define CONFIG_OF_LIBFDT - -/* LowLevel Init */ -/* PLL */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 0 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 /* 150MHz */ -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002 - -#define CONFIG_SYS_DA850_PLL0_PLLM 18 /* PLL0 -> 456 MHz */ -#define CONFIG_SYS_DA850_PLL1_PLLM 24 /* PLL1 -> 300 MHz */ - -/* DDR RAM */ -#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ - DV_DDR_PHY_EXT_STRBEN | \ - (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDBCR (0 | \ - (0 << DV_DDR_SDCR_DDR2TERM1_SHIFT) | \ - (0 << DV_DDR_SDCR_MSDRAMEN_SHIFT) | \ - (1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \ - (0x1 << DV_DDR_SDCR_DDREN_SHIFT) | \ - (0x1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ - (0x1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT) | \ - (0x1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \ - (0x3 << DV_DDR_SDCR_CL_SHIFT) | \ - (0x2 << DV_DDR_SDCR_IBANK_SHIFT) | \ - (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDBCR2 4 /* 13 row address bits */ - -/* - * freq = 150MHz -> t = 7ns - */ -#define CONFIG_SYS_DA850_DDR2_SDTIMR (0 | \ - (0x0d << DV_DDR_SDTMR1_RFC_SHIFT) | \ - (1 << DV_DDR_SDTMR1_RP_SHIFT) | \ - (1 << DV_DDR_SDTMR1_RCD_SHIFT) | \ - (1 << DV_DDR_SDTMR1_WR_SHIFT) | \ - (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \ - (7 << DV_DDR_SDTMR1_RC_SHIFT) | \ - (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ - (readl(&dv_ddr2_regs_ctrl->sdtimr) & 0x4) | /* Reserved */ \ - ((2 - 1) << DV_DDR_SDTMR1_WTR_SHIFT)) - -/* - * freq = 150MHz -> t=7ns - */ -#define CONFIG_SYS_DA850_DDR2_SDTIMR2 (0 | \ - (readl(&dv_ddr2_regs_ctrl->sdtimr2) & 0x80000000) | /* Reserved */ \ - (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ - (2 << DV_DDR_SDTMR2_XP_SHIFT) | \ - (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ - (15 << DV_DDR_SDTMR2_XSNR_SHIFT) | \ - (27 << DV_DDR_SDTMR2_XSRD_SHIFT) | \ - (0 << DV_DDR_SDTMR2_RTP_SHIFT) | \ - (2 << DV_DDR_SDTMR2_CKE_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000407 -#define CONFIG_SYS_DA850_DDR2_PBBPR 0x30 -#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ - DAVINCI_SYSCFG_SUSPSRC_SPI1 | \ - DAVINCI_SYSCFG_SUSPSRC_UART2 | \ - DAVINCI_SYSCFG_SUSPSRC_EMAC |\ - DAVINCI_SYSCFG_SUSPSRC_I2C) - -#define CONFIG_SYS_DA850_CS2CFG (DAVINCI_ABCR_WSETUP(2) | \ - DAVINCI_ABCR_WSTROBE(6) | \ - DAVINCI_ABCR_WHOLD(1) | \ - DAVINCI_ABCR_RSETUP(2) | \ - DAVINCI_ABCR_RSTROBE(6) | \ - DAVINCI_ABCR_RHOLD(1) | \ - DAVINCI_ABCR_ASIZE_16BIT) - -#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \ - DAVINCI_ABCR_WSTROBE(2) | \ - DAVINCI_ABCR_WHOLD(1) | \ - DAVINCI_ABCR_RSETUP(1) | \ - DAVINCI_ABCR_RSTROBE(6) | \ - DAVINCI_ABCR_RHOLD(1) | \ - DAVINCI_ABCR_ASIZE_8BIT) - -/* - * NOR Bootconfiguration word: - * Method: Direc boot - * EMIFA access mode: 16 Bit - */ -#define CONFIG_SYS_DV_NOR_BOOT_CFG (0x11) - -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY) -#define CONFIG_POST_EXTERNAL_WORD_FUNCS -#define CONFIG_SYS_POST_WORD_ADDR DAVINCI_RTC_BASE -#define CONFIG_LOGBUFFER -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -#define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_SYS_BOOTCOUNT_ADDR DAVINCI_RTC_BASE -#define CONFIG_SYS_BOOTCOUNT_BE - -#define CONFIG_SYS_NAND_U_BOOT_DST 0xc0080000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x60004000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x70000 -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST -#endif /* __CONFIG_H */ diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 5b4b011957..f646feefa9 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -52,6 +52,8 @@ */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */ #define CONFIG_SYS_MXC_I2C3_SLAVE 0xfe diff --git a/include/configs/galileo.h b/include/configs/galileo.h index b7ec2792bb..ba6c8f172b 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -15,6 +15,7 @@ #define CONFIG_SYS_MONITOR_LEN (1 << 20) #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_ARCH_MISC_INIT /* ns16550 UART is memory-mapped in Quark SoC */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 8b9d922876..484d76305f 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -57,7 +57,7 @@ #define CONFIG_CMD_GPIO /* Thermal */ -#define CONFIG_IMX6_THERMAL +#define CONFIG_IMX_THERMAL /* Serial */ #define CONFIG_MXC_UART @@ -107,6 +107,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_I2C_GSC 0 diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 8ff9077c37..3af02132f8 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -12,6 +12,8 @@ #ifndef __HIKEY_H #define __HIKEY_H +#include <linux/sizes.h> + /* We use generic board for hikey */ #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_POWER @@ -29,6 +31,8 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT +#define CONFIG_BOARD_EARLY_INIT_F + /* Physical Memory Map */ /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */ @@ -38,7 +42,8 @@ #define PHYS_SDRAM_1 0x00000000 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/ -#define PHYS_SDRAM_1_SIZE 0x3f000000 +#define PHYS_SDRAM_1_SIZE 0x3EFFFFFF + #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 @@ -55,15 +60,10 @@ #define GICC_BASE 0xf6802000 /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20)) - -/* PL011 Serial Configuration */ -#define CONFIG_PL011_SERIAL - -#define CONFIG_PL011_CLOCK 19200000 -#define CONFIG_PL01x_PORTS {(void *)0xF8015000} -#define CONFIG_CONS_INDEX 0 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M) +/* Serial port PL010/PL011 through the device model */ +#define CONFIG_PL01X_SERIAL #define CONFIG_BAUDRATE 115200 #define CONFIG_CMD_USB @@ -81,9 +81,7 @@ #endif #define CONFIG_HIKEY_GPIO -#define CONFIG_DM_GPIO #define CONFIG_CMD_GPIO -#define CONFIG_DM /* SD/MMC configuration */ #define CONFIG_GENERIC_MMC diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h deleted file mode 100644 index 2fa6c3d91b..0000000000 --- a/include/configs/ima3-mx53.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * (C) Copyright 2012, Stefano Babic <sbabic@denx.de> - * - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * Configuration settings for the MX53-EVK Freescale board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* SOC type must be included before imx-regs.h */ -#define CONFIG_MX53 -#include <asm/arch/imx-regs.h> - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_OF_LIBFDT - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) - -#define CONFIG_BOARD_EARLY_INIT_F - -/* Enable GPIOs */ -#define CONFIG_MXC_GPIO - -/* UART */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART4_BASE_ADDR - -/* MMC */ -#define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_ESDHC_NUM 1 - -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION - -/* Ethernet on FEC */ -#define CONFIG_MII - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x01 -#define CONFIG_PHY_ADDR CONFIG_FEC_MXC_PHYADDR -#define CONFIG_RESET_PHY_R -#define CONFIG_FEC_MXC_NO_ANEG -#define CONFIG_ETHPRIME "FEC0" - -/* SPI */ -#define CONFIG_HARD_SPI -#define CONFIG_MXC_SPI -#define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 - -/* SPI FLASH - not used for environment */ -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -#define CONFIG_SF_DEFAULT_SPEED 25000000 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Command definition */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#define CONFIG_CMD_GPIO - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ -#define CONFIG_SYS_TEXT_BASE 0xf0001400 /* uboot in nor flash */ - -#define CONFIG_ARP_TIMEOUT 200UL - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x70000000 -#define CONFIG_SYS_MEMTEST_END 0x10000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_CMDLINE_EDITING - -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nor0=f0000000.flash" - -/* FLASH and environment organization */ - -#define CONFIG_SYS_FLASH_BASE 0xF0000000 -#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */ -#define CONFIG_FLASH_CFI_MTD /* with MTD support */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 1024 - -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) - -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/* - * Default environment and default scripts - * to update uboot and load kernel - */ - -#define HOSTNAME ima3-mx53 - -#define CONFIG_HOSTNAME ima3-mx53 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram0 rw\0" \ - "addip_sta=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ - "addip=if test -n ${ipdyn};then run addip_dyn;" \ - "else run addip_sta;fi\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=${console},${baudrate}\0" \ - "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "console=ttymxc3\0" \ - "loadaddr=70800000\0" \ - "kernel_addr_r=70800000\0" \ - "ramdisk_addr_r=71000000\0" \ - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ - "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ - "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \ - "mmcargs=setenv bootargs root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs addip addtty addmtd addmisc mmcload;" \ - "bootm\0" \ - "mmcload=fatload mmc ${mmcdev}:${mmcpart} " \ - "${loadaddr} ${uimage}\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r}\0" \ - "net_self_load=tftp ${ramdisk_addr_r} ${ramdisk_file};" \ - "tftp ${kernel_addr_r} ${bootfile}\0" \ - "net_self=if run net_self_load;then " \ - "run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ - "else echo Images not loades;fi\0" \ - "satargs=setenv bootargs root=/dev/sda1\0" \ - "satafile=boot/uImage\0" \ - "ssdboot=echo Booting from ssd ...; " \ - "run satargs addip addtty addmtd addmisc;" \ - "sata init;ext2load sata 0:1 ${kernel_addr_r} " \ - "${satafile};bootm\0" \ - "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.imx\0" \ - "uimage=uImage\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "uboot_addr=0xf0001000\0" \ - "update=protect off 0xf0000000 +60000;" \ - "erase ${uboot_addr} +60000;" \ - "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ - "upd=if run load;then echo Updating u-boot;if run update;" \ - "then echo U-Boot updated;" \ - "else echo Error updating u-boot !;" \ - "echo Board without bootloader !!;" \ - "fi;" \ - "else echo U-Boot not downloaded..exiting;fi\0" \ - "bootcmd=run net_nfs\0" - - -#define CONFIG_CMD_SATA -#ifdef CONFIG_CMD_SATA - #define CONFIG_DWC_AHSATA - #define CONFIG_SYS_SATA_MAX_DEVICE 1 - #define CONFIG_DWC_AHSATA_PORT_ID 0 - #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR - #define CONFIG_LBA48 - #define CONFIG_LIBATA -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h deleted file mode 100644 index c18c35ef53..0000000000 --- a/include/configs/imx27lite.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* include common defines/options for all imx27lite related boards */ -#include "imx27lite-common.h" -/* - * SoC Configuration - */ -#define CONFIG_IMX27LITE -#define CONFIG_HOSTNAME imx27 -#define CONFIG_BOARDNAME "LogicPD imx27lite\n" - -/* - * Flash & Environment - */ -#define CONFIG_SYS_FLASH_SECT_SZ 0x2000 /* 8KB sect size Intel Flash */ -#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x20000) -#define PHYS_FLASH_SIZE 0x200000 -#define CONFIG_ENV_SECT_SIZE 0x10000 /* Env sector Size */ - -/* - * SD/MMC - */ -#define CONFIG_MXC_MCI_REGS_BASE 0x10014000 - -/* - * MTD partitions - */ -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0" -#define MTDPARTS_DEFAULT \ - "mtdparts=" \ - "physmap-flash.0:" \ - "256k(U-Boot)," \ - "1664k(user)," \ - "64k(env1)," \ - "64k(env2);" \ - "mxc_nand.0:" \ - "128k(IPL-SPL)," \ - "4m(kernel)," \ - "22m(rootfs)," \ - "-(userfs)" - -#endif /* __CONFIG_H */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h deleted file mode 100644 index 23e3a6c5fc..0000000000 --- a/include/configs/imx31_litekit.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Kshitij Gupta <kshitij@ti.com> - * - * Configuration settings for the LogicPD i.MX31 Litekit board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - - /* High Level Configuration Options */ -#define CONFIG_MX31 1 /* This is a mx31 */ -#define CONFIG_MX31_CLK32 32000 - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_SYS_TEXT_BASE 0xa0000000 - -#define CONFIG_MACH_TYPE MACH_TYPE_MX31LITE - -/* Temporarily disabled */ -#if 0 -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_FIT 1 -#define CONFIG_FIT_VERBOSE 1 -#endif - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) - -/* - * Hardware drivers - */ - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_MXC_GPIO - -#define CONFIG_HARD_SPI 1 -#define CONFIG_MXC_SPI 1 -#define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) - -/* PMIC Controller */ -#define CONFIG_POWER -#define CONFIG_POWER_SPI -#define CONFIG_POWER_FSL -#define CONFIG_FSL_PMIC_BUS 1 -#define CONFIG_FSL_PMIC_CS 0 -#define CONFIG_FSL_PMIC_CLK 1000000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13XXX - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SPI -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NAND - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.23.168 -#define CONFIG_SERVERIP 192.168.23.2 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ - "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ - "bootcmd=run bootcmd_net\0" \ - "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; tftpboot 0x80000000 uImage-mx31; bootm\0" \ - "prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; protect off all; erase 0xa00d0000 0xa01effff; cp.b 0x80000000 0xa00d0000 $(filesize)\0" - - -#define CONFIG_SMC911X 1 -#define CONFIG_SMC911X_BASE (CS4_BASE + 0x00020000) -#define CONFIG_SMC911X_32_BIT 1 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x10000 - -#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */ - -#define CONFIG_CMDLINE_EDITING 1 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE CS0_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x001f0000) -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE (64 * 1024) -#define CONFIG_ENV_SIZE (64 * 1024) - -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* - * JFFS2 partitions - */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" - -/* - * NAND flash - */ -#define CONFIG_NAND_MXC -#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR -#define CONFIG_MXC_NAND_HWECC - -#endif /* __CONFIG_H */ diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 86f327c827..3bea71b969 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -38,6 +38,8 @@ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET diff --git a/include/configs/jornada.h b/include/configs/jornada.h deleted file mode 100644 index 3090476340..0000000000 --- a/include/configs/jornada.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * Copyright 2010 (C) - * Kristoffer Ericson <kristoffer.ericson@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SA1110 1 /* This is an SA110 CPU */ -#define CONFIG_JORNADA700 1 /* on an HP Jornada 700 series */ -#define CONFIG_SYS_FLASH_PROTECTION 1 - -#define CONFIG_SYS_TEXT_BASE 0xC1F00000 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* Console setting */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * select serial console configuration - */ -#define CONFIG_SA1100_SERIAL 1 -#define CONFIG_SERIAL3 1 /* we use serial 3 */ -#define CONFIG_BAUDRATE 19200 -#define CONFIG_LOADS_ECHO 1 - -/* - * Command line configuration. - */ -#define CONFIG_CMD_JFFS2 - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOTARGS "root=/dev/hda1 console=ttySA0,19200n8 console=tty1" -#define CONFIG_BOOTCOMMAND "run boot_kernel" -#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ -#define CONFIG_SYS_LOAD_ADDR 0xc0000000 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* console buffsize */ -#define CONFIG_SYS_PBSIZE (256+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE 256 /* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START 0xc0040000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xc2000000 /* 4..128 MB */ -#define CONFIG_SYS_CPUSPEED 0x0a /* core clock 206MHz */ -#define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 } - -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_FLASH_CFI_WIDTH FLASH_CFI_32BIT -#define CONFIG_SYS_FLASH_BASE 0x00000000 -#define CONFIG_SYS_FLASH_ERASE_TOUT (4096) -#define CONFIG_SYS_FLASH_WRITE_TOUT (4096) -#define CONFIG_SYS_FLASH_INCREMENT 0x02000000 -#define PHYS_FLASH_1 0x00000000 /* starts at 0x0 */ -#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256KB Sectors */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 260 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 } -#define CONFIG_SYS_FLASH_EMPTY_INFO 1 -#define CONFIG_SYS_MONITOR_LEN 0x00040000 -#define CONFIG_SYS_MONITOR_BASE 0x00000000 -#define CONFIG_FLASH_SHOW_PROGRESS 1 - -/* Environment */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x00040000 -#define CONFIG_ENV_OFFSET 0x00040000 -#define CONFIG_ENV_SIZE 0x00040000 -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#define CONFIG_ENV_OVERWRITE 1 - -/* - Monitor - 0x00000000 - 0x00040000 (256kb) - Environment - 0x00040000 - 0x00080000 (256kb) - Kernel - 0x00080000 - 0x00380000 (3mb) - Rootfs - 0x00380000 - 0x........ (rest) -*/ - -#define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE -#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE -#define CONFIG_SYS_INIT_SP_ADDR 0x0 -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_2 0xc4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ - -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=jornada7xx-0" -#define MTDPARTS_DEFAULT "mtdparts=jornada7xx-0:256k(u-boot),256k(env),"\ - "3m(kernel),-(user);" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "flash_kernel=protect off all; " \ - "erase 00080000 0037ffff;cp.b c0000000 00080000 00300000;\0" \ - "flash_uboot=protect off all; " \ - "erase 00000000 0003ffff;cp.b c0000000 00000000 00040000;\0" \ - "boot_kernel=cp.b 00080000 c0000000 00300000;bootm;\0" -#endif /* __CONFIG_H */ diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 30810d3752..7f878b713a 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -8,6 +8,11 @@ #define _CONFIG_LACIE_KW_H /* + * Generic board support + */ +#define CONFIG_SYS_GENERIC_BOARD + +/* * Machine number definition */ #if defined(CONFIG_INETSPACE_V2) @@ -96,8 +101,6 @@ #undef CONFIG_SYS_IDE_MAXDEVICE #undef CONFIG_SYS_PROMPT #define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */ -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 #if defined(CONFIG_D2NET_V2) #define CONFIG_SYS_PROMPT "d2v2> " #elif defined(CONFIG_NET2BIG_V2) @@ -127,6 +130,11 @@ #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \ defined(CONFIG_NET2BIG_V2) #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET +#define CONFIG_SYS_IDE_MAXBUS 2 +#define CONFIG_SYS_IDE_MAXDEVICE 2 +#else +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 1 #endif #endif /* CONFIG_MVSATA_IDE */ diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h deleted file mode 100644 index 10a7b05daf..0000000000 --- a/include/configs/lp8x4x.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * ICP DAS LP-8x4x configuration file - * - * Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X /* Marvell PXA270 CPU */ -#define MACH_TYPE_LP8X4X 4539 /* ICP DAS LP-8x4x */ -#define CONFIG_MACH_TYPE MACH_TYPE_LP8X4X -#define CONFIG_SYS_TEXT_BASE 0x00000000 - -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOOTCOMMAND \ - "bootm 80000 - 240000;" - -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 mem=128M root=/dev/mmcblk0p1 rw" \ - "init=/sbin/init rootfstype=ext4 rootwait" - -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_LZMA /* LZMA compression support */ -#define CONFIG_OF_LIBFDT - -/* - * Serial Console Configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 -#define CONFIG_CONS_INDEX 3 -#define CONFIG_BAUDRATE 115200 - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_USB -#undef CONFIG_LCD -#undef CONFIG_CMD_IDE - -/* - * Networking Configuration - * chip on the ICPDAS LINPAC board - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x0C000000 -#define DM9000_IO 0x0C000000 -#define DM9000_DATA 0x0C004000 -#define DM9000_IO_2 0x0D000000 -#define DM9000_DATA_2 0x0D004000 -#define CONFIG_NET_RETRY_COUNT 10 - -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#endif - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " -#else -#endif -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_DEVICE_NULLDEV 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE 1 - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa0008000 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -/* Use first 64kb bank of the internal SRAM */ -#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000 - -/* - * NOR FLASH - */ -#define CONFIG_SYS_MONITOR_BASE 0x0 -#define CONFIG_SYS_MONITOR_LEN 0x40000 -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x40000 - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } - -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -#define CONFIG_SYS_FLASH_PROTECTION 1 - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0x0808c014 -#define CONFIG_SYS_GPSR1_VAL 0x00cf0002 -#define CONFIG_SYS_GPSR2_VAL 0x0221c000 -#define CONFIG_SYS_GPSR3_VAL 0x00020000 - -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x0000ab80 -#define CONFIG_SYS_GPCR2_VAL 0x00100000 -#define CONFIG_SYS_GPCR3_VAL 0x0 - -#define CONFIG_SYS_GPDR0_VAL 0xc0e9ddf4 -#define CONFIG_SYS_GPDR1_VAL 0xfcffab83 -#define CONFIG_SYS_GPDR2_VAL 0x02f1ffff -#define CONFIG_SYS_GPDR3_VAL 0x00021b81 - -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5e54018 -#define CONFIG_SYS_GAFR1_L_VAL 0x999a955a -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a00a -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x55f9a402 -#define CONFIG_SYS_GAFR3_L_VAL 0x540a950c -#define CONFIG_SYS_GAFR3_U_VAL 0x00001599 - -#define CONFIG_SYS_PSSR_VAL 0x32 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x005002c0 -#define CONFIG_SYS_CCCR 0x02000290 -#define CONFIG_SYS_CLKCFG 0x0000000b - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x2bd8aad2 -#define CONFIG_SYS_MSC1_VAL 0xb8c9b8dc -#define CONFIG_SYS_MSC2_VAL 0xfff9b8c9 -#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 -#define CONFIG_SYS_MDREFR_VAL 0x2093e018 -#define CONFIG_SYS_MDCNFG_VAL 0x890009d1 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x0000c497 -#define CONFIG_SYS_MCMEM1_VAL 0x0000c497 -#define CONFIG_SYS_MCATT0_VAL 0x0000c497 -#define CONFIG_SYS_MCATT1_VAL 0x0000c497 -#define CONFIG_SYS_MCIO0_VAL 0x00008407 -#define CONFIG_SYS_MCIO1_VAL 0x00008407 - -/* - * LCD - */ -#ifdef CONFIG_LCD -#define CONFIG_VOIPAC_LCD -#endif - -/* - * USB - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "lp8x4x" -#define CONFIG_USB_STORAGE -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index b44f3264e3..f73900fe30 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -389,6 +389,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ /* diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 7dcb719b01..02cc09c82b 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -275,6 +275,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ /* EEPROM */ @@ -308,12 +310,16 @@ #define FSL_QSPI_FLASH_NUM 2 #define CONFIG_SPI_FLASH_STMICRO +/* DSPI */ +#define CONFIG_FSL_DSPI +#define CONFIG_SPI_FLASH_ATMEL +#endif + /* DM SPI */ #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) #define CONFIG_CMD_SF #define CONFIG_DM_SPI_FLASH #endif -#endif /* * Video diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 2dbb5f70a9..55b909ceac 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -97,6 +97,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h new file mode 100644 index 0000000000..26136a52ce --- /dev/null +++ b/include/configs/lwmon5.h @@ -0,0 +1,633 @@ +/* + * (C) Copyright 2007-2013 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * lwmon5.h - configuration for lwmon5 board + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Liebherr extra version info + */ +#define CONFIG_IDENT_STRING " - v2.0" + +/* + * High Level Configuration Options + */ +#define CONFIG_LWMON5 1 /* Board is lwmon5 */ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_440 1 /* ... PPC440 family */ + +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_SYS_TEXT_BASE 0xFFF80000 +#define CONFIG_HOSTNAME lwmon5 + +#define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ + +#define CONFIG_4xx_DCACHE /* enable cache in SDRAM */ + +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */ +#define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r */ +#define CONFIG_BOARD_POSTCLK_INIT /* Call board_postclk_init */ +#define CONFIG_MISC_INIT_R /* Call misc_init_r */ +#define CONFIG_BOARD_RESET /* Call board_reset */ + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */ +#define CONFIG_SYS_MONITOR_LEN 0x80000 +#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Reserved for malloc */ + +#define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ +#define CONFIG_SYS_LIME_BASE_0 0xc0000000 +#define CONFIG_SYS_LIME_BASE_1 0xc1000000 +#define CONFIG_SYS_LIME_BASE_2 0xc2000000 +#define CONFIG_SYS_LIME_BASE_3 0xc3000000 +#define CONFIG_SYS_FPGA_BASE_0 0xc4000000 +#define CONFIG_SYS_FPGA_BASE_1 0xc4200000 +#define CONFIG_SYS_OCM_BASE 0xe0010000 /* ocm */ +#define CONFIG_SYS_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CONFIG_SYS_PCI_MEMBASE1 (CONFIG_SYS_PCI_MEMBASE + 0x10000000) +#define CONFIG_SYS_PCI_MEMBASE2 (CONFIG_SYS_PCI_MEMBASE1 + 0x10000000) +#define CONFIG_SYS_PCI_MEMBASE3 (CONFIG_SYS_PCI_MEMBASE2 + 0x10000000) + +#define CONFIG_SYS_USB2D0_BASE 0xe0000100 +#define CONFIG_SYS_USB_DEVICE 0xe0000000 +#define CONFIG_SYS_USB_HOST 0xe0000400 + +/* + * Initial RAM & stack pointer + * + * On LWMON5 we use D-cache as init-ram and stack pointer. We also move + * the POST_WORD from OCM to a 440EPx register that preserves it's + * content during reset (GPT0_COMP6). This way we reserve the OCM (16k) + * for logbuffer only. (GPT0_COMP1-COMP5 are reserved for logbuffer header.) + */ +#define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* unused GPT0 COMP reg */ +#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) +#define CONFIG_SYS_OCM_SIZE (16 << 10) +/* 440EPx errata CHIP 11: don't use last 4kbytes */ +#define CONFIG_SYS_MEM_TOP_HIDE (4 << 10) + +/* Additional registers for watchdog timer post test */ +#define CONFIG_SYS_WATCHDOG_TIME_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK2) +#define CONFIG_SYS_WATCHDOG_FLAGS_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK1) +#define CONFIG_SYS_DSPIC_TEST_ADDR CONFIG_SYS_WATCHDOG_FLAGS_ADDR +#define CONFIG_SYS_OCM_STATUS_ADDR CONFIG_SYS_WATCHDOG_FLAGS_ADDR +#define CONFIG_SYS_WATCHDOG_MAGIC 0x12480000 +#define CONFIG_SYS_WATCHDOG_MAGIC_MASK 0xFFFF0000 +#define CONFIG_SYS_DSPIC_TEST_MASK 0x00000001 +#define CONFIG_SYS_OCM_STATUS_OK 0x00009A00 +#define CONFIG_SYS_OCM_STATUS_FAIL 0x0000A300 +#define CONFIG_SYS_OCM_STATUS_MASK 0x0000FF00 + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() +#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external clock provided */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ + +/* + * FLASH related + */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CONFIG_SYS_FLASH0 0xFC000000 +#define CONFIG_SYS_FLASH1 0xF8000000 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 } + +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */ +#define CONFIG_SYS_FLASH_PROTECTION /* use hardware flash protection */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CONFIG_SYS_FLASH_QUIET_TEST /* don't warn upon unknown flash */ + +#define CONFIG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN) - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +/* + * DDR SDRAM + */ +#define CONFIG_SYS_MBYTES_SDRAM 256 +#define CONFIG_SYS_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ +#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ +#define CONFIG_DDR_ECC /* enable ECC */ + +/* POST support */ +#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ + CONFIG_SYS_POST_CPU | \ + CONFIG_SYS_POST_ECC | \ + CONFIG_SYS_POST_ETHER | \ + CONFIG_SYS_POST_FPU | \ + CONFIG_SYS_POST_I2C | \ + CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_OCM | \ + CONFIG_SYS_POST_RTC | \ + CONFIG_SYS_POST_SPR | \ + CONFIG_SYS_POST_UART | \ + CONFIG_SYS_POST_SYSMON | \ + CONFIG_SYS_POST_WATCHDOG | \ + CONFIG_SYS_POST_DSP | \ + CONFIG_SYS_POST_BSPEC1 | \ + CONFIG_SYS_POST_BSPEC2 | \ + CONFIG_SYS_POST_BSPEC3 | \ + CONFIG_SYS_POST_BSPEC4 | \ + CONFIG_SYS_POST_BSPEC5) + +/* Define here the base-addresses of the UARTs to test in POST */ +#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \ + CONFIG_SYS_NS16550_COM2 } + +#define CONFIG_POST_UART { \ + "UART test", \ + "uart", \ + "This test verifies the UART operation.", \ + POST_RAM | POST_SLOWTEST | POST_ALWAYS | POST_MANUAL, \ + &uart_post_test, \ + NULL, \ + NULL, \ + CONFIG_SYS_POST_UART \ + } + +#define CONFIG_POST_WATCHDOG { \ + "Watchdog timer test", \ + "watchdog", \ + "This test checks the watchdog timer.", \ + POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT, \ + &lwmon5_watchdog_post_test, \ + NULL, \ + NULL, \ + CONFIG_SYS_POST_WATCHDOG \ + } + +#define CONFIG_POST_BSPEC1 { \ + "dsPIC init test", \ + "dspic_init", \ + "This test returns result of dsPIC READY test run earlier.", \ + POST_RAM | POST_ALWAYS, \ + &dspic_init_post_test, \ + NULL, \ + NULL, \ + CONFIG_SYS_POST_BSPEC1 \ + } + +#define CONFIG_POST_BSPEC2 { \ + "dsPIC test", \ + "dspic", \ + "This test gets result of dsPIC POST and dsPIC version.", \ + POST_RAM | POST_ALWAYS, \ + &dspic_post_test, \ + NULL, \ + NULL, \ + CONFIG_SYS_POST_BSPEC2 \ + } + +#define CONFIG_POST_BSPEC3 { \ + "FPGA test", \ + "fpga", \ + "This test checks FPGA registers and memory.", \ + POST_RAM | POST_ALWAYS | POST_MANUAL, \ + &fpga_post_test, \ + NULL, \ + NULL, \ + CONFIG_SYS_POST_BSPEC3 \ + } + +#define CONFIG_POST_BSPEC4 { \ + "GDC test", \ + "gdc", \ + "This test checks GDC registers and memory.", \ + POST_RAM | POST_ALWAYS | POST_MANUAL,\ + &gdc_post_test, \ + NULL, \ + NULL, \ + CONFIG_SYS_POST_BSPEC4 \ + } + +#define CONFIG_POST_BSPEC5 { \ + "SYSMON1 test", \ + "sysmon1", \ + "This test checks GPIO_62_EPX pin indicating power failure.", \ + POST_RAM | POST_MANUAL | POST_NORMAL | POST_SLOWTEST, \ + &sysmon1_post_test, \ + NULL, \ + NULL, \ + CONFIG_SYS_POST_BSPEC5 \ + } + +#define CONFIG_SYS_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */ +#define CONFIG_LOGBUFFER +/* Reserve GPT0_COMP1-COMP5 for logbuffer header */ +#define CONFIG_ALT_LH_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1) +#define CONFIG_ALT_LB_ADDR (CONFIG_SYS_OCM_BASE) +#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ + +/* + * I2C + */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 +#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F + +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* RTC */ +#define CONFIG_SYS_I2C_EEPROM_CPU_ADDR 0x52 /* EEPROM (CPU Modul) */ +#define CONFIG_SYS_I2C_EEPROM_MB_ADDR 0x53 /* EEPROM AT24C128 (MainBoard) */ +#define CONFIG_SYS_I2C_DSPIC_ADDR 0x54 /* dsPIC */ +#define CONFIG_SYS_I2C_DSPIC_2_ADDR 0x55 /* dsPIC */ +#define CONFIG_SYS_I2C_DSPIC_KEYB_ADDR 0x56 /* dsPIC */ +#define CONFIG_SYS_I2C_DSPIC_IO_ADDR 0x57 /* dsPIC */ + +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel AT24C128 has */ + /* 64 byte page write mode using*/ + /* last 6 bits of the address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE + +#define CONFIG_RTC_PCF8563 /* enable Philips PCF8563 RTC */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ +#define CONFIG_SYS_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ +#define CONFIG_SYS_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */ + +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_EEPROM_CPU_ADDR,\ + CONFIG_SYS_I2C_EEPROM_MB_ADDR, \ + CONFIG_SYS_I2C_DSPIC_ADDR, \ + CONFIG_SYS_I2C_DSPIC_2_ADDR, \ + CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,\ + CONFIG_SYS_I2C_DSPIC_IO_ADDR } + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +/* Update size in "reg" property of NOR FLASH device tree nodes */ +#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE + +#define CONFIG_FIT /* enable FIT image support */ + +#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ + +#define CONFIG_PREBOOT "setenv bootdelay 15" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=lwmon5\0" \ + "netdev=eth0\0" \ + "unlock=yes\0" \ + "logversion=2\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ + "addmisc=setenv bootargs ${bootargs} rtc-pcf8563.probe=0,0x51\0"\ + "flash_nfs=run nfsargs addip addtty addmisc;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty addmisc;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};" \ + "run nfsargs addip addtty addmisc;bootm\0" \ + "rootpath=/opt/eldk/ppc_4xxFP\0" \ + "bootfile=/tftpboot/lwmon5/uImage\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ + "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ + "update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \ + "cp.b 200000 FFF80000 80000\0" \ + "upd=run load update\0" \ + "lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \ + "autoscr 200000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_PPC4xx_EMAC +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET_DELAY 300 + +#define CONFIG_HAS_ETH0 +#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 1 + +/* Video console */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_MB862xx +#define CONFIG_VIDEO_MB862xx_ACCEL +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +#define CONFIG_CONSOLE_EXTRA_INFO +#define VIDEO_FB_16BPP_PIXEL_SWAP +#define VIDEO_FB_16BPP_WORD_SWAP + +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_SPLASH_SCREEN + +/* + * USB/EHCI + */ +#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_PPC4XX /* on PPC4xx platform */ +#define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300 +#define CONFIG_EHCI_MMIO_BIG_ENDIAN +#define CONFIG_EHCI_DESC_BIG_ENDIAN +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */ +#define CONFIG_USB_STORAGE + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + +#ifdef CONFIG_VIDEO +#define CONFIG_CMD_BMP +#endif + +#ifdef CONFIG_440EPX +#define CONFIG_CMD_USB +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SUPPORT_VFAT + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ + +#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/ + +#ifndef DEBUG +#define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */ +#endif +#define CONFIG_WD_PERIOD 40000 /* in usec */ +#define CONFIG_WD_MAX_RATE 66600 /* in ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the 40x Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ + +/* + * External Bus Controller (EBC) Setup + */ +#define CONFIG_SYS_FLASH CONFIG_SYS_FLASH_BASE + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CONFIG_SYS_EBC_PB0AP 0x03000280 +#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH | 0xfc000) + +/* Memory Bank 1 (Lime) initialization */ +#define CONFIG_SYS_EBC_PB1AP 0x01004380 +#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_LIME_BASE_0 | 0xbc000) + +/* Memory Bank 2 (FPGA) initialization */ +#define CONFIG_SYS_EBC_PB2AP 0x01004400 +#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA_BASE_0 | 0x1c000) + +/* Memory Bank 3 (FPGA2) initialization */ +#define CONFIG_SYS_EBC_PB3AP 0x01004400 +#define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_FPGA_BASE_1 | 0x1c000) + +#define CONFIG_SYS_EBC_CFG 0xb8400000 + +/* + * Graphics (Fujitsu Lime) + */ +/* SDRAM Clock frequency adjustment register */ +#define CONFIG_SYS_LIME_SDRAM_CLOCK 0xC1FC0038 +#if 1 /* 133MHz is not tested enough, use 100MHz for now */ +/* Lime Clock frequency is to set 100MHz */ +#define CONFIG_SYS_LIME_CLOCK_100MHZ 0x00000 +#else +/* Lime Clock frequency for 133MHz */ +#define CONFIG_SYS_LIME_CLOCK_133MHZ 0x10000 +#endif + +/* SDRAM Parameter register */ +#define CONFIG_SYS_LIME_MMR 0xC1FCFFFC +/* + * SDRAM parameter value; was 0x414FB7F2, caused several vertical bars + * and pixel flare on display when 133MHz was configured. According to + * SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed + * Grade + */ +#ifdef CONFIG_SYS_LIME_CLOCK_133MHZ +#define CONFIG_SYS_MB862xx_MMR 0x414FB7F3 +#define CONFIG_SYS_MB862xx_CCF CONFIG_SYS_LIME_CLOCK_133MHZ +#else +#define CONFIG_SYS_MB862xx_MMR 0x414FB7F2 +#define CONFIG_SYS_MB862xx_CCF CONFIG_SYS_LIME_CLOCK_100MHZ +#endif + +/* + * GPIO Setup + */ +#define CONFIG_SYS_GPIO_PHY1_RST 12 +#define CONFIG_SYS_GPIO_FLASH_WP 14 +#define CONFIG_SYS_GPIO_PHY0_RST 22 +#define CONFIG_SYS_GPIO_PERM_VOLT_FEED 49 +#define CONFIG_SYS_GPIO_DSPIC_READY 51 +#define CONFIG_SYS_GPIO_CAN_ENABLE 53 +#define CONFIG_SYS_GPIO_LSB_ENABLE 54 +#define CONFIG_SYS_GPIO_EEPROM_EXT_WP 55 +#define CONFIG_SYS_GPIO_HIGHSIDE 56 +#define CONFIG_SYS_GPIO_EEPROM_INT_WP 57 +#define CONFIG_SYS_GPIO_BOARD_RESET 58 +#define CONFIG_SYS_GPIO_LIME_S 59 +#define CONFIG_SYS_GPIO_LIME_RST 60 +#define CONFIG_SYS_GPIO_SYSMON_STATUS 62 +#define CONFIG_SYS_GPIO_WATCHDOG 63 + +#define GPIO49_VAL 1 + +/* + * PPC440 GPIO Configuration + */ +#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO15 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMCTxD(7) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 GMCTxD(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 GMCTxD(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO49_VAL}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index 35058e222a..8853d8fcc0 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -172,6 +172,8 @@ #ifdef CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */ #endif diff --git a/include/configs/magnesium.h b/include/configs/magnesium.h deleted file mode 100644 index 3364bde71f..0000000000 --- a/include/configs/magnesium.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2010 Heiko Schocher <hs@denx.de> - * - * based on: - * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* include common defines/options for all imx27lite related boards */ -#include "imx27lite-common.h" - -/* - * SoC Configuration - */ -#define CONFIG_MAGNESIUM -#define CONFIG_HOSTNAME magnesium -#define CONFIG_BOARDNAME "Projectiondesign magnesium\n" - -/* - * Flash & Environment - */ -#define CONFIG_SYS_FLASH_SECT_SZ 0x8000 /* 64KB sect size */ -#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x40000) -#define PHYS_FLASH_SIZE 0x800000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* Env sector Size */ - -/* - * NAND - */ -#define CONFIG_SYS_NAND_LARGEPAGE - -/* - * SD/MMC - */ -#define CONFIG_MXC_MCI_REGS_BASE 0x10013000 - -/* - * MTD partitions - */ -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0" -#define MTDPARTS_DEFAULT \ - "mtdparts=" \ - "physmap-flash.0:" \ - "256k(U-Boot)," \ - "7680k(user)," \ - "128k(env1)," \ - "128k(env2);" \ - "mxc_nand.0:" \ - "128k(IPL-SPL)," \ - "4m(kernel)," \ - "22m(rootfs)," \ - "-(userfs)" - -#endif /* __CONFIG_H */ diff --git a/include/configs/mv88f6281gtw_ge.h b/include/configs/mv88f6281gtw_ge.h deleted file mode 100644 index 45a4a7541c..0000000000 --- a/include/configs/mv88f6281gtw_ge.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_MV88F6281GTW_GE_H -#define _CONFIG_MV88F6281GTW_GE_H - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-MV88F6281GTW_GE" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_MACH_MV88F6281GTW_GE /* Machine type */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_ENV -#define CONFIG_CMD_FAT -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_USB - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* Unwanted stuffs from mv-common.h */ -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_FAT -#undef CONFIG_CMD_UBI -#undef CONFIG_CMD_UBIFS -#undef CONFIG_RBTREE - -/* - * Environment variables configurations - */ -#ifdef CONFIG_SPI_FLASH -#define CONFIG_ENV_IS_IN_SPI_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -#endif -#define CONFIG_ENV_SIZE 0x1000 /* 4k */ -#define CONFIG_ENV_ADDR 0x30000 -#define CONFIG_ENV_OFFSET 0x30000 /* env starts here */ - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "${x_bootcmd_usb}; bootm 0x6400000;" - -#define CONFIG_MTDPARTS "spi0.0:512k(uboot)," \ - "512k@512k(psm),2m@1m(kernel),13m@3m(rootfs)\0" - -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ - "x_bootcmd_kernel=cp.b 0xE8100000 0x6400000 0x200000\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=/dev/mtdblock3 ro rootfstype=squashfs\0" - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_MV88E61XX_SWITCH /* Enable mv88e61xx switch driver */ -#endif /* CONFIG_CMD_NET */ - -#endif /* _CONFIG_MV88F6281GTW_GE_H */ diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index bd7216e47b..04140865f4 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -115,6 +115,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ /* RTC */ #define CONFIG_RTC_IMXDI diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index c9983f3f58..6bfdaa6432 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -42,6 +42,8 @@ */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_MXC_SPI #define CONFIG_MXC_GPIO diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h deleted file mode 100644 index 373cfcbc79..0000000000 --- a/include/configs/mx51_efikamx.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> - * - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * Configuration settings for the MX51EVK Board - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -/* An i.MX51 CPU */ -#define CONFIG_MX51 - -#define machine_is_efikamx() (CONFIG_MACH_TYPE == MACH_TYPE_MX51_EFIKAMX) -#define machine_is_efikasb() (CONFIG_MACH_TYPE == MACH_TYPE_MX51_EFIKASB) - -#include <asm/arch/imx-regs.h> - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_SYS_TEXT_BASE 0x97800000 - -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_IDE -#define CONFIG_CMD_DATE - -/* - * Environmental settings - */ - -#define CONFIG_ENV_OFFSET (6 * 64 * 1024) -#define CONFIG_ENV_SECT_SIZE (1 * 64 * 1024) -#define CONFIG_ENV_SIZE (4 * 1024) - -/* - * ATAG setup - */ -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_OF_LIBFDT 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - -/* - * Hardware drivers - */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_MXC_GPIO - -/* - * SPI Interface - */ -#ifdef CONFIG_CMD_SPI - -#define CONFIG_HARD_SPI -#define CONFIG_MXC_SPI -#define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) - -/* SPI FLASH */ -#ifdef CONFIG_CMD_SF - -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SF_DEFAULT_CS 1 -#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) -#define CONFIG_SF_DEFAULT_SPEED 25000000 - -#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_MAX_HZ 25000000 -#define CONFIG_ENV_SPI_MODE (SPI_MODE_0) -#define CONFIG_FSL_ENV_IN_SF -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_SYS_NO_FLASH - -#else -#define CONFIG_ENV_IS_NOWHERE -#endif - -/* SPI PMIC */ -#define CONFIG_POWER -#define CONFIG_POWER_SPI -#define CONFIG_POWER_FSL -#define CONFIG_FSL_PMIC_BUS 0 -#define CONFIG_FSL_PMIC_CS (0 | 120 << 8) -#define CONFIG_FSL_PMIC_CLK 25000000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13XXX -#endif - -/* - * MMC Configs - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_ESDHC_NUM 2 -#endif - -/* - * ATA/IDE - */ -#ifdef CONFIG_CMD_IDE -#define CONFIG_LBA48 -#undef CONFIG_IDE_LED -#undef CONFIG_IDE_RESET - -#define CONFIG_MX51_PATA - -#define __io - -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 - -#define CONFIG_SYS_ATA_BASE_ADDR 0x83fe0000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0 - -#define CONFIG_SYS_ATA_DATA_OFFSET 0xa0 -#define CONFIG_SYS_ATA_REG_OFFSET 0xa0 -#define CONFIG_SYS_ATA_ALT_OFFSET 0xd8 - -#define CONFIG_SYS_ATA_STRIDE 4 - -#define CONFIG_IDE_PREINIT -#define CONFIG_MXC_ATA_PIO_MODE 4 -#endif - -/* - * USB - */ -#define CONFIG_CMD_USB -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ -#define CONFIG_USB_EHCI_MX5 -#define CONFIG_USB_ULPI -#define CONFIG_USB_ULPI_VIEWPORT -#define CONFIG_MXC_USB_PORT 1 -#if (CONFIG_MXC_USB_PORT == 0) -#define CONFIG_MXC_USB_PORTSC (1 << 28) -#define CONFIG_MXC_USB_FLAGS MXC_EHCI_INTERNAL_PHY -#else -#define CONFIG_MXC_USB_PORTSC (2 << 30) -#define CONFIG_MXC_USB_FLAGS 0 -#endif -#define CONFIG_EHCI_IS_TDI -#define CONFIG_USB_STORAGE -#define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP -#define CONFIG_PREBOOT -/* USB NET */ -#ifdef CONFIG_CMD_NET -#define CONFIG_USB_ETHER_ASIX -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#endif -#endif /* CONFIG_CMD_USB */ - -/* - * Filesystems - */ -#ifdef CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BOOTDELAY 3 -#define CONFIG_LOADADDR 0x90800000 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x90000000 -#define CONFIG_SYS_MEMTEST_END 0x90010000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_CMDLINE_EDITING - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#define CONFIG_SYS_DDR_CLKSEL 0 -#define CONFIG_SYS_CLKTL_CBCDR 0x59E35145 -#define CONFIG_SYS_MAIN_PWR_ON - -#endif diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 0479195d6d..b889c254cc 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -48,6 +48,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ /* MMC Configs */ diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 82c8af802f..4f304ed89f 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -41,6 +41,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ /* PMIC Configs */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index ad2629da72..3a65861e5e 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -76,6 +76,8 @@ /* I2C Configs */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ /* PMIC Controller */ diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index bcdb054360..e46f2eeecb 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -38,6 +38,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ /* MMC Configs */ diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 634a09f349..6e89dd1455 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -14,7 +14,7 @@ #define CONFIG_SPL_MMC_SUPPORT #include "imx6_spl.h" -#define CONFIG_IMX6_THERMAL +#define CONFIG_IMX_THERMAL #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index 11cf538b0a..1c998058a9 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -51,6 +51,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 6a57841f5f..9dcc64ea57 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -11,7 +11,7 @@ #include "mx6_common.h" -#define CONFIG_IMX6_THERMAL +#define CONFIG_IMX_THERMAL /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) @@ -80,6 +80,10 @@ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "console=" CONFIG_CONSOLE_DEV "\0" \ + "dfuspi=dfu 0 sf 0:0:10000000:0\0" \ + "dfu_alt_info_spl=spl raw 0x400\0" \ + "dfu_alt_info_img=u-boot raw 0x10000\0" \ + "dfu_alt_info=spl raw 0x400\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ @@ -238,6 +242,18 @@ #define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 #define CONFIG_G_DNL_MANUFACTURER "FSL" + +#define CONFIG_USB_FUNCTION_FASTBOOT +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 + +/* USB Device Firmware Update support */ +#define CONFIG_CMD_DFU +#define CONFIG_USB_FUNCTION_DFU +#define CONFIG_DFU_MMC +#define CONFIG_DFU_SF #endif #endif /* __MX6QSABRE_COMMON_CONFIG_H */ diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 5f635ca6c5..e9e3b27f36 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -44,6 +44,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 04d53a7f08..ae39503542 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -14,7 +14,6 @@ #ifdef CONFIG_SPL #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT #include "imx6_spl.h" #endif @@ -36,6 +35,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 @@ -197,6 +198,6 @@ #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/ #endif -#define CONFIG_IMX6_THERMAL +#define CONFIG_IMX_THERMAL #endif /* __CONFIG_H */ diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 74d04a088f..edf7d3f93a 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -15,7 +15,6 @@ #ifdef CONFIG_SPL #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT #include "imx6_spl.h" #endif @@ -128,6 +127,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 @@ -177,7 +178,7 @@ #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) #endif -#define CONFIG_IMX6_THERMAL +#define CONFIG_IMX_THERMAL #define CONFIG_CMD_TIME diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 4a2280bc18..d5faae6a7b 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -14,14 +14,15 @@ #include "mx6_common.h" #include <asm/imx-common/gpio.h> +#define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) + /* SPL options */ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT #include "imx6_spl.h" -#define CONFIG_ROM_UNIFIED_SECTIONS -#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -34,11 +35,6 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_CMD_FUSE -#ifdef CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP -#endif - /* MMC Configs */ #ifdef CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR @@ -53,24 +49,21 @@ #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ #endif -#undef CONFIG_BOOTM_NETBSD -#undef CONFIG_BOOTM_PLAN9 -#undef CONFIG_BOOTM_RTEMS - -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV - /* I2C configs */ #define CONFIG_CMD_I2C #ifdef CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_SPEED 100000 -#endif - -#define PHYS_SDRAM_SIZE SZ_512M -#undef CONFIG_CMD_IMLS +/* PMIC only for 9X9 EVK */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE3000 +#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 +#endif #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 @@ -80,7 +73,7 @@ "console=ttymxc0\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ - "fdt_file=imx6ul-14x14-evk.dtb\0" \ + "fdt_file=undefined\0" \ "fdt_addr=0x83000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ @@ -134,9 +127,19 @@ "fi; " \ "else " \ "bootz; " \ - "fi;\0" + "fi;\0" \ + "findfdt="\ + "if test $fdt_file = undefined; then " \ + "if test $board_name = EVK && test $board_rev = 9X9; then " \ + "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \ + "if test $board_name = EVK && test $board_rev = 14X14; then " \ + "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \ + "if test $fdt_file = undefined; then " \ + "echo WARNING: Could not determine dtb to use; fi; " \ + "fi;\0" \ #define CONFIG_BOOTCOMMAND \ + "run findfdt;" \ "mmc dev ${mmcdev};" \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ @@ -150,9 +153,6 @@ "else run netboot; fi" /* Miscellaneous configurable options */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - #define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000) @@ -238,9 +238,8 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_MICREL -#define CONFIG_FEC_DMA_MINALIGN 64 #endif -#define CONFIG_IMX6_THERMAL +#define CONFIG_IMX_THERMAL #endif diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h new file mode 100644 index 0000000000..ea2be496e0 --- /dev/null +++ b/include/configs/mx7_common.h @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX7. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MX7_COMMON_H +#define __MX7_COMMON_H + +#include <linux/sizes.h> +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> + +#ifndef CONFIG_MX7 +#define CONFIG_MX7 +#endif + +/* Timer settings */ +#define CONFIG_MXC_GPT_HCLK +#define CONFIG_SYSCOUNTER_TIMER +#define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ + +/* Enable iomux-lpsr support */ +#define CONFIG_IOMUX_LPSR +#define CONFIG_IMX_FIXED_IVT_OFFSET + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_ROM_UNIFIED_SECTIONS +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_LOADADDR 0x80800000 +#define CONFIG_SYS_TEXT_BASE 0x87800000 + +#ifndef CONFIG_BOOTDELAY +#define CONFIG_BOOTDELAY 3 +#endif + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Filesystems and image support */ +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT + +/* Miscellaneous configurable options */ +#undef CONFIG_CMD_IMLS +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 512 +#define CONFIG_SYS_MAXARGS 32 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +/* GPIO */ +#define CONFIG_MXC_GPIO +#define CONFIG_CMD_GPIO + +/* UART */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR + +/* MMC */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC + +/* Fuses */ +#define CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP + +#endif diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h new file mode 100644 index 0000000000..f16f9c1271 --- /dev/null +++ b/include/configs/mx7dsabresd.h @@ -0,0 +1,191 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX7D SABRESD board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MX7D_SABRESD_CONFIG_H +#define __MX7D_SABRESD_CONFIG_H + +#include "mx7_common.h" + +#define CONFIG_DBG_MONITOR +#define PHYS_SDRAM_SIZE SZ_1G + +/* Network */ +#define CONFIG_CMD_MII +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0 + +#define CONFIG_PHYLIB +#define CONFIG_PHY_BROADCOM +/* ENET1 */ +#define IMX_FEC_BASE ENET_IPS_BASE_ADDR + +/* MMC Config*/ +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE3000 +#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 + +#undef CONFIG_BOOTM_NETBSD +#undef CONFIG_BOOTM_PLAN9 +#undef CONFIG_BOOTM_RTEMS + +#undef CONFIG_CMD_EXPORTENV +#undef CONFIG_CMD_IMPORTENV + +/* I2C configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +#define CONFIG_MFG_ENV_SETTINGS \ + "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ + "rdinit=/linuxrc " \ + "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ + "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ + "g_mass_storage.iSerialNumber=\"\" "\ + "clk_ignore_unused "\ + "\0" \ + "initrd_addr=0x83800000\0" \ + "initrd_high=0xffffffff\0" \ + "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_MFG_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=imx7d-sdb.dtb\0" \ + "fdt_addr=0x83000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (8 * SZ_64K) +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ +#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ +#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX7 +#define CONFIG_USB_STORAGE +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +#define CONFIG_IMX_THERMAL + +#endif /* __CONFIG_H */ diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h deleted file mode 100644 index dd70adccea..0000000000 --- a/include/configs/nhk8815.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * (C) Copyright 2005 - * STMicroelectronics. - * Configuration settings for the "Nomadik Hardware Kit" NHK-8815, - * the evaluation board for the Nomadik 8815 System on Chip. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <nomadik.h> - -#define CONFIG_NOMADIK_8815 /* cpu variant */ - -#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */ - -/* commands */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_SYS_NO_FLASH -/* There is NAND storage */ -#define CONFIG_NAND_NOMADIK -#define CONFIG_CMD_JFFS2 - -/* user interface */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_LOAD_ADDR 0x800000 /* default load address */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE - -/* boot config */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_TAG -#define CONFIG_BOOTDELAY 1 -#define CONFIG_BOOTARGS "root=/dev/ram0 console=ttyAMA1,115200n8 init=linuxrc" -#define CONFIG_BOOTCOMMAND "fsload 0x100000 kernel.uimg;" \ - " fsload 0x800000 initrd.gz.uimg;" \ - " bootm 0x100000 0x800000" - -/* memory-related information */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0x08000000 /* SDR-SDRAM BANK #2*/ -#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE) -/* The IPL loads us at 0, tell so to u-boot. Put stack pointer 1M into RAM */ -#define CONFIG_SYS_TEXT_BASE 0x00000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + (1<<20)) - -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024) - -#define CONFIG_BOARD_LATE_INIT /* call board_late_init during start up */ - -/* timing informazion */ -#define CONFIG_SYS_TIMERBASE 0x101E2000 - -/* serial port (PL011) configuration */ -#define CONFIG_PL011_SERIAL -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 -#define CFG_SERIAL0 0x101FD000 -#define CFG_SERIAL1 0x101FB000 - -#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 } -#define CONFIG_PL011_CLOCK 48000000 - -/* i2c, for the port extenders (uses gpio.c in board directory) */ -#ifndef __ASSEMBLY__ -#include <asm/arch/gpio.h> -#define CONFIG_CMD_I2C -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT 1 /* I2C bit-banged */ -#define I2C_SOFT_DEFS -#define CONFIG_SYS_I2C_SOFT_SPEED 400000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F -#define __SDA 63 -#define __SCL 62 -#define I2C_SDA(x) nmk_gpio_set(__SDA, x) -#define I2C_SCL(x) nmk_gpio_set(__SCL, x) -#define I2C_READ (nmk_gpio_get(__SDA)!=0) -#define I2C_ACTIVE nmk_gpio_dir(__SDA, 1) -#define I2C_TRISTATE nmk_gpio_dir(__SDA, 0) -#define I2C_DELAY (udelay(2)) -#endif /* __ASSEMBLY__ */ - -/* Ethernet */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_IO_VADDR 0xee000000 -#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) -#define __mem_isa(a) ((a) + PCI_MEMORY_VADDR) - -#define CONFIG_SMC91111 /* Using SMC91c111*/ -#define CONFIG_SMC91111_BASE 0x34000300 -#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ -#define CONFIG_SMC_USE_32_BIT -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_IP_DEFRAG /* Allows faster download, TFTP and NFS */ -#define CONFIG_TFTP_BLOCKSIZE 4096 -#define CONFIG_NFS_READ_SIZE 4096 - -/* Storage information: onenand and nand */ -#define CONFIG_CMD_ONENAND -#define CONFIG_MTD_ONENAND_VERIFY_WRITE -#define CONFIG_SYS_ONENAND_BASE 0x30000000 - -#define CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 /* SMPS0n */ - -/* - * Filesystem information - * - * Since U-Boot has been loaded to RAM by vendor code, we could use - * either or both OneNand and Nand. However, we need to know where the - * filesystem lives. Comments below report vendor-selected partitions - */ -#ifdef CONFIG_BOOT_ONENAND - /* Partition Size Start - * XloaderTOC + X-Loader 256KB 0x00000000 - * Memory init function 256KB 0x00040000 - * U-Boot + env 2MB 0x00080000 - * Sysimage (kernel + ramdisk) 4MB 0x00280000 - * JFFS2 Root filesystem 22MB 0x00680000 - * JFFS2 User Data 227.5MB 0x01C80000 - */ -# define CONFIG_JFFS2_DEV "onenand0" -# define CONFIG_JFFS2_PART_SIZE 0x01600000 -# define CONFIG_JFFS2_PART_OFFSET 0x00680000 -# define CONFIG_ENV_IS_IN_ONENAND -# define CONFIG_ENV_SIZE 0x20000 /* 128 Kb - one sector */ -# define CONFIG_ENV_ADDR (0x00280000 - CONFIG_ENV_SIZE) - -#else /* BOOT_NAND */ - /* Partition Size Start - * XloaderTOC + X-Loader 256KB 0x00000000 - * Memory init function 256KB 0x00040000 - * U-Boot + env 2MB 0x00080000 - * Kernel Image 3MB 0x00280000 - * JFFS2 Root filesystem 22MB 0x00580000 - * JFFS2 User Data 100.5MB 0x01b80000 - */ -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_NAND 1 /* For the jffs2 support*/ -# define CONFIG_JFFS2_PART_SIZE 0x01600000 -# define CONFIG_JFFS2_PART_OFFSET 0x00580000 -# define CONFIG_ENV_IS_IN_NAND -# define CONFIG_ENV_SIZE 0x20000 /* 128 Kb - one sector */ -# define CONFIG_ENV_OFFSET (0x00280000 - CONFIG_ENV_SIZE) - -#endif /* CONFIG_BOOT_ONENAND */ - -/* this is needed to make hello_world.c and other stuff happy */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -#endif /* __CONFIG_H */ diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index dd4cb0f893..b1137713e1 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -43,6 +43,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_I2C_EDID diff --git a/include/configs/novena.h b/include/configs/novena.h index 0970fd7548..cd426be18c 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -102,6 +102,8 @@ /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_I2C_MULTI_BUS #define CONFIG_I2C_MXC diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index f309b2e83b..bf986f86cb 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -121,7 +121,6 @@ /* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST 1 #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h index 713df3cf80..3f777b6aeb 100644 --- a/include/configs/omap3_cairo.h +++ b/include/configs/omap3_cairo.h @@ -70,7 +70,6 @@ /* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST 1 #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 7e7f6f2e9f..0ebe5c118b 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -15,6 +15,7 @@ #define CONFIG_OMAP /* This is TI OMAP core */ #define CONFIG_OMAP_GPIO #define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD /* Common ARM Erratas */ #define CONFIG_ARM_ERRATA_454179 #define CONFIG_ARM_ERRATA_430973 diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 04433edcc5..4409103f49 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -19,6 +19,8 @@ #include <configs/ti_omap3_common.h> #include <asm/mach-types.h> +#undef CONFIG_BOOTDELAY + /* * Display CPU and Board information */ @@ -81,74 +83,33 @@ /*#undef CONFIG_ENV_IS_NOWHERE*/ +#ifndef CONFIG_SPL_BUILD + +#include <config_distro_defaults.h> + +/* Environment */ +#define ENV_DEVICE_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + +#define MEM_LAYOUT_SETTINGS \ + DEFAULT_LINUX_BOOT_ENV \ + "scriptaddr=0x87E00000\0" \ + "pxefile_addr_r=0x87F00000\0" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) + +#include <config_distro_bootcmd.h> + + #define CONFIG_EXTRA_ENV_SETTINGS \ - "usbtty=cdc_acm\0" \ - "loadaddr=0x82000000\0" \ - "dtbaddr=0x81600000\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "usbtty=cdc_acm\0" \ - "console=ttyO2,115200n8\0" \ - "mpurate=auto\0" \ - "vram=12M\0" \ - "dvimode=1024x768MR-16@60\0" \ - "defaultdisplay=dvi\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "nandroot=/dev/mtdblock4 rw\0" \ - "nandrootfstype=jffs2\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapfb.debug=y " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "nandargs=setenv bootargs console=${console} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapfb.debug=y " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr}\0" \ - "mmcbootfdt=echo Booting with DT from mmc ...; " \ - "bootz ${loadaddr} - ${dtbaddr}\0" \ - "nandboot=echo Booting from onenand ...; " \ - "run nandargs; " \ - "onenand read ${loadaddr} 280000 400000; " \ - "bootz ${loadaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadzimage; then " \ - "if test -n $dtbfile; then " \ - "if run loadfdt; then " \ - "run mmcbootfdt;" \ - "fi;" \ - "fi;" \ - "run mmcboot;" \ - "fi;" \ - "fi;" \ - "run nandboot;" \ + ENV_DEVICE_SETTINGS \ + MEM_LAYOUT_SETTINGS \ + BOOTENV + +#endif /* * FLASH and environment organization diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 8bd36340e7..ecd5615859 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -105,7 +105,6 @@ * Board NAND Info. */ #define CONFIG_SYS_NAND_BASE NAND_BASE -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h deleted file mode 100644 index 9e2cf7333c..0000000000 --- a/include/configs/omap3_mvblx.h +++ /dev/null @@ -1,277 +0,0 @@ -/* - * MATRIX VISION GmbH mvBlueLYNX-X - * - * Derived from omap3_beagle.h: - * (C) Copyright 2006-2008 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <x0khasim@ti.com> - * - * Configuration settings for the TI OMAP3530 Beagle board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */ -#define CONFIG_MACH_TYPE MACH_TYPE_MVBLX -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP_COMMON -/* Common ARM Erratas */ -#define CONFIG_ARM_ERRATA_454179 -#define CONFIG_ARM_ERRATA_430973 -#define CONFIG_ARM_ERRATA_621766 - -#define CONFIG_SDRC /* The chip has SDRC controller */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h> - -/* - * Display CPU and Board information - */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#define CONFIG_MISC_INIT_R - -#define CONFIG_OF_LIBFDT 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 -#define CONFIG_SERIAL_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (2 << 10) /* 2 KiB */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 1 /* UART1 */ - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 - -/* silent console by default */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 -#define CONFIG_SILENT_CONSOLE 1 - -/* USB */ -#define CONFIG_USB_MUSB_UDC 1 -#define CONFIG_USB_OMAP3 1 -#define CONFIG_TWL4030_USB 1 - -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 -#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1 -#define CONFIG_USBD_VENDORID 0x164c -#define CONFIG_USBD_PRODUCTID_GSERIAL 0x0201 -#define CONFIG_USBD_PRODUCTID_CDCACM 0x0201 -#define CONFIG_USBD_MANUFACTURER "MATRIX VISION GmbH" -#define CONFIG_USBD_PRODUCT_NAME "mvBlueLYNX-X" - -/* no FLASH available */ -#define CONFIG_SYS_NO_FLASH - -/* commands to include */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_FPGA_LOADMK - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX - -/* - * TWL4030 - */ -#define CONFIG_TWL4030_POWER 1 - -/* Environment information */ -#undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */ -#define CONFIG_BOOTDELAY 0 -#define CONFIG_ZERO_BOOTDELAY_CHECK - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "silent=true\0" \ - "loadaddr=0x82000000\0" \ - "usbtty=cdc_acm\0" \ - "console=ttyO0,115200n8\0" \ - "mpurate=600\0" \ - "vram=12M\0" \ - "dvimode=1024x768-24@60\0" \ - "defaultdisplay=dvi\0" \ - "loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\ - "/lib/firmware/mvblx/${fpgafilename}; then " \ - "fpga load 0 ${loadaddr} ${filesize}; " \ - "fi;\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapfb.debug=y " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype} " \ - "mvfw.fpgavers=${fpgavers} " \ - "${cmdline_suffix}\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "mmcbootcmd= " \ - "echo Trying mmc${mmcdev}; " \ - "mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "setenv mmcroot /dev/mmcblk${mmcdev}p2 rw; " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loading boot environment from mmc${mmcdev}; " \ - "run importbootenv; " \ - "fi;" \ - "run loadfpga; " \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "fi;" \ - "fi\0" - -#define CONFIG_BOOTCOMMAND \ - "setenv mmcdev 1;" \ - "run mmcbootcmd || " \ - "setenv mmcdev 0;" \ - "run mmcbootcmd" - - -#define CONFIG_AUTO_COMPLETE 1 -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -#define CONFIG_SYS_ALT_MEMTEST 1 /* alternative memtest with looping */ -#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END (0x9dffffff) /* end = 448 MB */ -#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */ - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -#define CONFIG_ENV_IS_NOWHERE 1 - -/*---------------------------------------------------------------------------- - * Network Subsystem (SMSC9211 Ethernet from SMSC9118 family) - *---------------------------------------------------------------------------- - */ -#if defined(CONFIG_CMD_NET) - #define CONFIG_SMC911X 1 - #define CONFIG_SMC911X_32_BIT - #define CONFIG_SMC911X_BASE 0x2C000000 -#endif /* (CONFIG_CMD_NET) */ - -#define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA -#define CONFIG_FPGA_ALTERA -#define CONFIG_FPGA_CYCLON2 -#define CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_SYS_FPGA_DONT_USE_CONF_DONE - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 0xA0>>1 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 2^4 = 16-byte pages */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_SYS_EEPROM_SIZE 256 /* Bytes */ -#define CONFIG_ID_EEPROM -#define CONFIG_SYS_EEPROM_BUS_NUM 2 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_OMAP3_SPI - -#define CONFIG_SYS_CACHELINE_SIZE 64 - -#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 53ff61d10c..3b1e5d7ff8 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -88,7 +88,6 @@ #endif /* CONFIG_NAND */ /* Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ /* Environment information */ diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h deleted file mode 100644 index f43e477ad2..0000000000 --- a/include/configs/omap3_sdp3430.h +++ /dev/null @@ -1,318 +0,0 @@ -/* - * (C) Copyright 2006-2009 - * Texas Instruments Incorporated. - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <x0khasim@ti.com> - * Nishanth Menon <nm@ti.com> - * - * Configuration settings for the 3430 TI SDP3430 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* TODO: REMOVE THE FOLLOWING - * Retained the following till size.h is removed in u-boot - */ -#include <linux/sizes.h> -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */ -#define CONFIG_OMAP_COMMON -/* Common ARM Erratas */ -#define CONFIG_ARM_ERRATA_454179 -#define CONFIG_ARM_ERRATA_430973 -#define CONFIG_ARM_ERRATA_621766 - -#define CONFIG_SDRC /* The chip has SDRC controller */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h> - -/* - * NOTE: these #defines presume standard SDP jumper settings. - * In particular: - * - 26 MHz clock (not 19.2 or 38.4 MHz) - * - Boot from 128MB NOR, not NAND or OneNAND - * - * At this writing, OMAP3 U-Boot support doesn't permit concurrent - * support for all the flash types the board supports. - */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 - -#define CONFIG_OF_LIBFDT 1 - -/* - * Size of malloc() pool - * Total Size Environment - 256k - * Malloc - add 256k - */ -#define CONFIG_ENV_SIZE (256 << 10) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) - -/*--------------------------------------------------------------------------*/ - -/* - * Hardware drivers - */ - -/* - * TWL4030 - */ -#define CONFIG_TWL4030_POWER 1 - -/* - * serial port - NS16550 compatible - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* Original SDP u-boot used UART1 and thus J8 (innermost); that can be - * swapped with UART2 via jumpering. Downsides of using J8: it doesn't - * support UART boot (that's only for UART3); it prevents sharing a Linux - * kernel (LL_DEBUG_UART3) or filesystem (getty ttyS2) with most boards. - * - * UART boot uses UART3 on J9, and the SDP user's guide says to use - * that for console. Downsides of using J9: you can't use IRDA too; - * since UART3 isn't in the CORE power domain, it may be a bit less - * usable in certain PM-sensitive debug scenarios. - */ -#undef CONSOLE_J9 /* else J8/UART1 (innermost) */ - -#ifdef CONSOLE_J9 -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 /* UART3 */ -#else -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 1 /* UART1 */ -#endif - -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -/* - * I2C for power management setup - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX - -/* OMITTED: single 1 Gbit MT29F1G NAND flash */ - -/* - * NOR boot support - single 1 Gbit PF48F6000M0 Strataflash - */ -#define CONFIG_SYS_FLASH_BASE 0x10000000 -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -#define CONFIG_SYS_FLASH_CFI 1 /* use CFI geometry data */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster writes */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware sector protection */ -#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* flinfo 'E' for empty */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ - -#define CONFIG_SYS_FLASH_CFI_WIDTH 2 -#define PHYS_FLASH_SIZE (128 << 20) -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors on one chip */ - -/* OMITTED: single 2 Gbit KFM2G16 OneNAND flash */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_SYS_ENV_SECT_SIZE (256 << 10) -#define CONFIG_ENV_OFFSET CONFIG_SYS_ENV_SECT_SIZE -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE) -/*--------------------------------------------------------------------------*/ - -/* Enabled commands */ -#define CONFIG_CMD_DHCP /* DHCP Support */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ -#define CONFIG_CMD_MMC /* MMC support */ - -/*--------------------------------------------------------------------------*/ -/* - * MMC boot support - */ - -#if defined(CONFIG_CMD_MMC) -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 -#endif - -/*---------------------------------------------------------------------------- - * SMSC9115 Ethernet from SMSC9118 family - *---------------------------------------------------------------------------- - */ -#if defined(CONFIG_CMD_NET) - -#define CONFIG_LAN91C96 -#define CONFIG_LAN91C96_BASE DEBUG_BASE -#define CONFIG_LAN91C96_EXT_PHY - -#define CONFIG_BOOTP_SEND_HOSTNAME -/* - * BOOTP fields - */ -#define CONFIG_BOOTP_SUBNETMASK 0x00000001 -#define CONFIG_BOOTP_GATEWAY 0x00000002 -#define CONFIG_BOOTP_HOSTNAME 0x00000004 -#define CONFIG_BOOTP_BOOTPATH 0x00000010 -#endif /* (CONFIG_CMD_NET) */ - -/* - * Environment setup - * - * Default boot order: mmc bootscript, MMC uImage, NOR image. - * Network booting environment must be configured at site. - */ - -/* allow overwriting serial config and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyS0,115200n8\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "root=/dev/mmcblk0p2 rw " \ - "rootfstype=ext3 rootwait\0" \ - "norargs=setenv bootargs console=${console} " \ - "root=/dev/mtdblock3 rw " \ - "rootfstype=jffs2\0" \ - "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from MMC/SD ...; " \ - "autoscr ${loadaddr}\0" \ - "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from MMC/SD ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "norboot=echo Booting from NOR ...; " \ - "run norargs; " \ - "bootm 0x80000\0" \ - -#define CONFIG_BOOTCOMMAND \ - "if mmcinit; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run norboot; " \ - "fi; " \ - "fi; " \ - "else run norboot; fi" - -#define CONFIG_AUTO_COMPLETE 1 - -/*--------------------------------------------------------------------------*/ - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -/* SDRAM Test range - start at 16 meg boundary -ends at 32Meg - - * a basic sanity check ONLY - * IF you would like to increase coverage, increase the end address - * or run the test with custom options - */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + (32 << 20)) - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) - -/*--------------------------------------------------------------------------*/ - -/* - * 3430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by - * 32KHz clk, or from external sig. This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -/* - * SDRAM Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/*--------------------------------------------------------------------------*/ - -/* - * NOR FLASH usage ... default nCS0: - * - one 256KB sector for U-Boot - * - one 256KB sector for its parameters (not all used) - * - eight sectors (2 MB) for kernel - * - rest for JFFS2 - */ - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) - -/* - * NAND FLASH usage ... default nCS1: - * - four 128KB sectors for X-Loader - * - four 128KB sectors for U-Boot - * - two 128KB sector for its parameters - * - 32 sectors (4 MB) for kernel - * - rest for filesystem - */ - -/* - * OneNAND FLASH usage ... default nCS2: - * - four 128KB sectors for X-Loader - * - two 128KB sectors for U-Boot - * - one 128KB sector for its parameters - * - sixteen sectors (2 MB) for kernel - * - rest for filesystem - */ - -#define CONFIG_SYS_CACHELINE_SIZE 64 - -#endif /* __CONFIG_H */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 86479213fc..18a2924fd4 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -19,6 +19,47 @@ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" #endif +#define DFU_ALT_INFO_MMC \ + "dfu_alt_info_mmc=" \ + "boot part 0 1;" \ + "rootfs part 0 2;" \ + "MLO fat 0 1;" \ + "MLO.raw raw 0x100 0x100;" \ + "u-boot.img.raw raw 0x300 0x400;" \ + "spl-os-args.raw raw 0x80 0x80;" \ + "spl-os-image.raw raw 0x900 0x2000;" \ + "spl-os-args fat 0 1;" \ + "spl-os-image fat 0 1;" \ + "u-boot.img fat 0 1;" \ + "uEnv.txt fat 0 1\0" + +#define DFU_ALT_INFO_EMMC \ + "dfu_alt_info_emmc=" \ + "rawemmc raw 0 3751936;" \ + "boot part 1 1;" \ + "rootfs part 1 2;" \ + "MLO fat 1 1;" \ + "MLO.raw raw 0x100 0x100;" \ + "u-boot.img.raw raw 0x300 0x400;" \ + "spl-os-args.raw raw 0x80 0x80;" \ + "spl-os-image.raw raw 0x900 0x2000;" \ + "spl-os-args fat 1 1;" \ + "spl-os-image fat 1 1;" \ + "u-boot.img fat 1 1;" \ + "uEnv.txt fat 1 1\0" + +#define DFU_ALT_INFO_RAM \ + "dfu_alt_info_ram=" \ + "kernel ram 0x80200000 0x4000000;" \ + "fdt ram 0x80f80000 0x80000;" \ + "ramdisk ram 0x81000000 0x4000000\0" + +#define DFUARGS \ + "dfu_bufsiz=0x10000\0" \ + DFU_ALT_INFO_MMC \ + DFU_ALT_INFO_EMMC \ + DFU_ALT_INFO_RAM + #include <configs/ti_omap5_common.h> #define CONFIG_CONS_INDEX 3 @@ -58,6 +99,27 @@ #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 +/* USB GADGET */ +#define CONFIG_USB_DWC3_PHY_OMAP +#define CONFIG_USB_DWC3_OMAP +#define CONFIG_USB_DWC3 +#define CONFIG_USB_DWC3_GADGET + +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DOWNLOAD +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" +#define CONFIG_G_DNL_VENDOR_NUM 0x0403 +#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 +#define CONFIG_USB_GADGET_DUALSPEED + +/* USB Device Firmware Update support */ +#define CONFIG_USB_FUNCTION_DFU +#define CONFIG_DFU_RAM +#define CONFIG_CMD_DFU + +#define CONFIG_DFU_MMC + /* Enabled commands */ #define CONFIG_CMD_DHCP /* DHCP Support */ diff --git a/include/configs/openrd.h b/include/configs/openrd.h deleted file mode 100644 index 72113144b3..0000000000 --- a/include/configs/openrd.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * (C) Copyright 2009 - * Net Insight <www.netinsight.net> - * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net> - * - * Based on sheevaplug.h: - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_OPENRD_H -#define _CONFIG_OPENRD_H - -/* - * Version number information - */ -#ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE -# define CONFIG_IDENT_STRING "\nOpenRD-Ultimate" -#else -# ifdef CONFIG_BOARD_IS_OPENRD_CLIENT -# define CONFIG_IDENT_STRING "\nOpenRD-Client" -# else -# ifdef CONFIG_BOARD_IS_OPENRD_BASE -# define CONFIG_IDENT_STRING "\nOpenRD-Base" -# else -# error Unknown OpenRD board specified -# endif -# endif -#endif - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_MACH_OPENRD_BASE /* Machine type */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_SYS_MVFS -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_IDE - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* - * Environment variables configurations - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -#endif -/* - * max 4k env size is enough, but in case of nand - * it has to be rounded to sector size - */ -#define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x60000 -#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ -/* - * Environment is right behind U-Boot in flash. Make sure U-Boot - * doesn't grow into the environment area. - */ -#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "${x_bootcmd_usb}; bootm 0x6400000;" - -#define MTDIDS_DEFAULT "nand0=nand_mtd" -#define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\ - "0x400000@0x100000(uImage),"\ - "0x1fb00000@0x500000(rootfs)" - -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ - "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \ - "mtdids="MTDIDS_DEFAULT"\0" \ - "mtdparts="MTDPARTS_DEFAULT"\0" - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -# ifdef CONFIG_BOARD_IS_OPENRD_BASE -# define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -# else -# define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -# endif -# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE -# define CONFIG_PHY_BASE_ADR 0x0 -# define PHY_NO "88E1121" -# else -# define CONFIG_PHY_BASE_ADR 0x8 -# define PHY_NO "88E1116" -# endif -#endif /* CONFIG_CMD_NET */ - -/* - * SATA Driver configuration - */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif /*CONFIG_MVSATA_IDE*/ - -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_MVEBU_MMC -#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE -#endif /* CONFIG_CMD_MMC */ - -#endif /* _CONFIG_OPENRD_BASE_H */ diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index 0d06fce1eb..426ec7246f 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -44,6 +44,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/otc570.h b/include/configs/otc570.h deleted file mode 100644 index 0cada63ef7..0000000000 --- a/include/configs/otc570.h +++ /dev/null @@ -1,252 +0,0 @@ -/* - * (C) Copyright 2010-2011 - * Daniel Gorsulowski <daniel.gorsulowski@esd.eu> - * esd electronic system design gmbh <www.esd.eu> - * - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * Configuation settings for the esd OTC570 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include <asm/hardware.h> - -/* - * Warning: changing CONFIG_SYS_TEXT_BASE requires - * adapting the initial boot program. - * Since the linker has to swallow that define, we must use a pure - * hex number here! - */ -#define CONFIG_SYS_TEXT_BASE 0x20002000 - -/* - * since a number of boards are not being listed in linux - * arch/arm/tools/mach-types any more, the mach-types have to be - * defined here - */ -#define MACH_TYPE_OTC570 2166 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ - -/* Misc CPU related */ -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SERIAL_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_MISC_INIT_R /* Call misc_init_r */ - -#define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */ -#define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ -#define CONFIG_PREBOOT /* enable preboot variable */ - -/* - * Hardware drivers - */ - -/* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */ -#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP - -/* general purpose I/O */ -#define CONFIG_AT91_GPIO - -/* Console output */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK - -/* LCD */ -#define CONFIG_LCD -#undef CONFIG_SPLASH_SCREEN - -#ifdef CONFIG_LCD -# define LCD_BPP LCD_COLOR8 - -# ifndef CONFIG_SPLASH_SCREEN -# define CONFIG_LCD_LOGO -# define CONFIG_LCD_INFO -# undef CONFIG_LCD_INFO_BELOW_LOGO -# endif /* CONFIG_SPLASH_SCREEN */ - -# undef LCD_TEST_PATTERN -# define CONFIG_SYS_WHITE_ON_BLACK -# define CONFIG_ATMEL_LCD -# define CONFIG_SYS_CONSOLE_IS_IN_ENV -# define CONFIG_OTC570_LCD_BASE (CONFIG_SYS_SDRAM_BASE + 0x03fa5000) -# define CONFIG_CMD_BMP -#endif /* CONFIG_LCD */ - -/* RTC and I2C stuff */ -#define CONFIG_RTC_DS1338 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#ifdef CONFIG_SYS_I2C_SOFT -#define CONFIG_SYS_I2C_SOFT_SPEED 100000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F - -/* Configure data and clock pins for pio */ -# define I2C_INIT { \ - at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \ - at91_set_pio_output(AT91_PIO_PORTB, 5, 0); \ -} -# define I2C_SOFT_DECLARATIONS -/* Configure data pin as output */ -# define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTB, 4, 0) -/* Configure data pin as input */ -# define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTB, 4, 0) -/* Read data pin */ -# define I2C_READ at91_get_pio_value(AT91_PIO_PORTB, 4) -/* Set data pin */ -# define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTB, 4, bit) -/* Set clock pin */ -# define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTB, 5, bit) -# define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ -#endif /* CONFIG_SYS_I2C_SOFT */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NAND -#define CONFIG_CMD_USB -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DATE - -/* LED */ -#define CONFIG_AT91_LED - -/* - * SDRAM: 1 bank, min 32, max 128 MB - * Initialized before u-boot gets started. - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 /* ATMEL_BASE_CS1 */ -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 - -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x00100000) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01E00000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00100000) - -/* - * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, - * leaving the correct space for initial global data structure above - * that address while providing maximum stack area below. - */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM0 + 0x1000 - GENERATED_GBL_DATA_SIZE) - -/* DataFlash */ -#ifdef CONFIG_SYS_USE_DATAFLASH -# define CONFIG_ATMEL_DATAFLASH_SPI -# define CONFIG_HAS_DATAFLASH -# define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 -# define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -# define AT91_SPI_CLK 15000000 -# define DATAFLASH_TCSS (0x1a << 16) -# define DATAFLASH_TCHS (0x1 << 24) -#endif - -/* NOR flash is not populated, disable it */ -#define CONFIG_SYS_NO_FLASH - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -# define CONFIG_NAND_ATMEL -# define CONFIG_SYS_MAX_NAND_DEVICE 1 -# define CONFIG_SYS_NAND_BASE 0x40000000 /* ATMEL_BASE_CS3 */ -# define CONFIG_SYS_NAND_DBW_8 -# define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -# define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -# define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15) -# define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22) -#endif - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_FIT -#define CONFIG_NET_RETRY_COUNT 20 -#undef CONFIG_RESET_PHY_R - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT - -/* CAN */ -#define CONFIG_AT91_CAN - -/* hw-controller addresses */ -#define CONFIG_ET1100_BASE 0x70000000 /* ATMEL_BASE_CS6 */ - -#ifdef CONFIG_SYS_USE_DATAFLASH - -/* bootstrap + u-boot + env in dataflash on CS0 */ -# define CONFIG_ENV_IS_IN_DATAFLASH -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ - 0x8400) -# define CONFIG_ENV_OFFSET 0x4200 -# define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ - CONFIG_ENV_OFFSET) -# define CONFIG_ENV_SIZE 0x4200 - -#elif CONFIG_SYS_USE_NANDFLASH - -/* bootstrap + u-boot + env + linux in nandflash */ -# define CONFIG_ENV_IS_IN_NAND 1 -# define CONFIG_ENV_OFFSET 0xC0000 -# define CONFIG_ENV_SIZE 0x20000 - -#endif - -#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ - 128*1024, 0x1000) - -#endif diff --git a/include/configs/p2371-0000.h b/include/configs/p2371-0000.h index 9d7b650d98..f2a713d0be 100644 --- a/include/configs/p2371-0000.h +++ b/include/configs/p2371-0000.h @@ -13,7 +13,6 @@ #include "tegra210-common.h" /* High-level configuration options */ -#define V_PROMPT "Tegra210 (P2371-0000) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-0000" /* Board-specific serial config */ @@ -60,6 +59,4 @@ #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" -#define COUNTER_FREQUENCY 38400000 - #endif /* _P2371_0000_H */ diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h new file mode 100644 index 0000000000..3bdf1961a3 --- /dev/null +++ b/include/configs/p2371-2180.h @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2013-2015 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _P2371_2180_H +#define _P2371_2180_H + +#include <linux/sizes.h> + +#include "tegra210-common.h" + +/* High-level configuration options */ +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-2180" + +/* Board-specific serial config */ +#define CONFIG_TEGRA_ENABLE_UARTA + +/* I2C */ +#define CONFIG_SYS_I2C_TEGRA +#define CONFIG_CMD_I2C + +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) + +/* SPI */ +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 24000000 +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH_SIZE (4 << 20) + +/* USB2.0 Host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX + +/* General networking support */ +#define CONFIG_CMD_DHCP + +#include "tegra-common-usb-gadget.h" +#include "tegra-common-post.h" + +/* Crystal is 38.4MHz. clk_m runs at half that rate */ +#define COUNTER_FREQUENCY 19200000 + +#endif /* _P2371_2180_H */ diff --git a/include/configs/p2571.h b/include/configs/p2571.h index 356c941a77..c65d3e5fcb 100644 --- a/include/configs/p2571.h +++ b/include/configs/p2571.h @@ -13,7 +13,6 @@ #include "tegra210-common.h" /* High-level configuration options */ -#define V_PROMPT "Tegra210 (P2571) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2571" /* Board-specific serial config */ @@ -61,7 +60,6 @@ #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" -#define COUNTER_FREQUENCY 38400000 #define CONFIG_OF_BOARD_SETUP #endif /* _P2571_H */ diff --git a/include/configs/palmld.h b/include/configs/palmld.h deleted file mode 100644 index ec48c14aca..0000000000 --- a/include/configs/palmld.h +++ /dev/null @@ -1,245 +0,0 @@ -/* - * Palm LifeDrive configuration file - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_PALMLD 1 /* Palm LifeDrive board */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Environment settings - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_SYS_TEXT_BASE 0x0 - -#define CONFIG_BOOTCOMMAND \ - "if mmcinfo && fatload mmc 0 0xa0000000 uboot.script ; then " \ - "source 0xa0000000; " \ - "else " \ - "bootm 0x0x60000; " \ - "fi; " -#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,9600" -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS - -#define CONFIG_LZMA /* LZMA compression support */ - -/* - * Serial Console Configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 -#define CONFIG_CONS_INDEX 3 -#define CONFIG_BAUDRATE 9600 - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_IDE -#define CONFIG_LCD -#define CONFIG_PXA_LCD - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION -#endif - -/* - * LCD - */ -#ifdef CONFIG_LCD -#define CONFIG_LQ038J7DH53 -#define CONFIG_VIDEO_LOGO -#define CONFIG_CMD_BMP -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -/* - * Clock Configuration - */ -#define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */ - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * NOR FLASH - */ -#ifdef CONFIG_CMD_FLASH -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x00080000 /* 512 KB */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_FLASH_CFI_LEGACY -#define CONFIG_SYS_FLASH_LEGACY_512Kx16 - -#define CONFIG_SYS_MONITOR_BASE 0 -#define CONFIG_SYS_MONITOR_LEN 0x40000 - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 -#define CONFIG_SYS_FLASH_LOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_PROTECTION - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#else -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_NOWHERE -#endif - -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_SIZE 0x4000 - -/* - * IDE - */ -#ifdef CONFIG_CMD_IDE -#define CONFIG_LBA48 -#undef CONFIG_IDE_LED -#undef CONFIG_IDE_RESET - -#define __io - -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 - -#define CONFIG_SYS_ATA_BASE_ADDR 0x20000000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0 - -#define CONFIG_SYS_ATA_DATA_OFFSET 0x10 -#define CONFIG_SYS_ATA_REG_OFFSET 0x10 -#define CONFIG_SYS_ATA_ALT_OFFSET 0x10 - -#define CONFIG_SYS_ATA_STRIDE 1 -#endif - -/* - * GPIO settings - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x00000000 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5180012 -#define CONFIG_SYS_GAFR1_L_VAL 0x69988056 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa580aa -#define CONFIG_SYS_GAFR2_L_VAL 0x6aaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x01040001 -#define CONFIG_SYS_GAFR3_L_VAL 0x540a950c -#define CONFIG_SYS_GAFR3_U_VAL 0x00000009 -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CONFIG_SYS_GPCR3_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0xc26b0000 -#define CONFIG_SYS_GPDR1_VAL 0xfcdfaa93 -#define CONFIG_SYS_GPDR2_VAL 0x7bbaffff -#define CONFIG_SYS_GPDR3_VAL 0x006ff38d -#define CONFIG_SYS_GPSR0_VAL 0x0d9e45ee -#define CONFIG_SYS_GPSR1_VAL 0x03affdae -#define CONFIG_SYS_GPSR2_VAL 0x07554000 -#define CONFIG_SYS_GPSR3_VAL 0x01bc0785 - -#define CONFIG_SYS_PSSR_VAL 0x30 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x01ffffff -#define CONFIG_SYS_CCCR 0x02000210 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x7ff844c8 -#define CONFIG_SYS_MSC1_VAL 0x7ff86ab4 -#define CONFIG_SYS_MSC2_VAL 0x7ff87ff8 -#define CONFIG_SYS_MDCNFG_VAL 0x0B880acd -#define CONFIG_SYS_MDREFR_VAL 0x201fa031 -#define CONFIG_SYS_MDMRS_VAL 0x00320032 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000003 -#define CONFIG_SYS_MCMEM0_VAL 0x0001c391 -#define CONFIG_SYS_MCMEM1_VAL 0x0001c391 -#define CONFIG_SYS_MCATT0_VAL 0x0001c391 -#define CONFIG_SYS_MCATT1_VAL 0x0001c391 -#define CONFIG_SYS_MCIO0_VAL 0x00014611 -#define CONFIG_SYS_MCIO1_VAL 0x0001c391 - -#endif /* __CONFIG_H */ diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h deleted file mode 100644 index 81c3f028ff..0000000000 --- a/include/configs/palmtc.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Palm Tungsten|C configuration file - * - * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/pxa-regs.h> - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA25X 1 /* Intel PXA255 CPU */ -#define CONFIG_PALMTC 1 /* Palm Tungsten|C board */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Environment settings - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_SYS_TEXT_BASE 0x0 - -#define CONFIG_BOOTCOMMAND \ - "if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then " \ - "source 0xa0000000; " \ - "else " \ - "bootm 0x80000; " \ - "fi; " -#define CONFIG_BOOTARGS \ - "console=tty0 console=ttyS0,115200" -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS - -#define CONFIG_LZMA /* LZMA compression support */ - -/* - * Serial Console Configuration - * STUART - the lower serial port on Colibri board - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 -#define CONFIG_CONS_INDEX 3 -#define CONFIG_BAUDRATE 115200 - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_LCD -#define CONFIG_PXA_LCD - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION -#endif - -/* - * LCD - */ -#ifdef CONFIG_LCD -#define CONFIG_ACX517AKN -#define CONFIG_VIDEO_LOGO -#define CONFIG_CMD_BMP -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -/* - * Clock Configuration - */ -#define CONFIG_SYS_CPUSPEED 0x161 /* 400MHz;L=1 M=3 T=1 */ - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 - -/* - * NOR FLASH - */ -#ifdef CONFIG_CMD_FLASH -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 64 - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 -#define CONFIG_SYS_FLASH_LOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_PROTECTION - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x40000 -#else -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_NOWHERE -#endif - -#define CONFIG_SYS_MONITOR_BASE 0x0 -#define CONFIG_SYS_MONITOR_LEN 0x40000 - -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_ENV_ADDR 0x40000 - -/* - * GPIO settings - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x00011004 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5000008 -#define CONFIG_SYS_GAFR1_L_VAL 0x60888050 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa50aaa -#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x00000000 -#define CONFIG_SYS_GPCR0_VAL 0x0 -#define CONFIG_SYS_GPCR1_VAL 0x0 -#define CONFIG_SYS_GPCR2_VAL 0x0 -#define CONFIG_SYS_GPDR0_VAL 0xcfff8140 -#define CONFIG_SYS_GPDR1_VAL 0xfcbfbef3 -#define CONFIG_SYS_GPDR2_VAL 0x0001ffff -#define CONFIG_SYS_GPSR0_VAL 0x00010f8f -#define CONFIG_SYS_GPSR1_VAL 0x00bf5de5 -#define CONFIG_SYS_GPSR2_VAL 0x03fe0800 - -#define CONFIG_SYS_PSSR_VAL PSSR_RDH - -/* Clock setup: - * CKEN[1] - PWM1 ; CKEN[6] - FFUART - * CKEN[12] - MMC ; CKEN[16] - LCD - */ -#define CONFIG_SYS_CKEN 0x00011042 -#define CONFIG_SYS_CCCR 0x00000161 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x800092c2 -#define CONFIG_SYS_MSC1_VAL 0x80008000 -#define CONFIG_SYS_MSC2_VAL 0x80008000 -#define CONFIG_SYS_MDCNFG_VAL 0x00001ac9 -#define CONFIG_SYS_MDREFR_VAL 0x00118018 -#define CONFIG_SYS_MDMRS_VAL 0x00220032 -#define CONFIG_SYS_FLYCNFG_VAL 0x01fe01fe -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00010e04 -#define CONFIG_SYS_MCIO1_VAL 0x00010e04 - -#endif /* __CONFIG_H */ diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h deleted file mode 100644 index 5ffed82955..0000000000 --- a/include/configs/palmtreo680.h +++ /dev/null @@ -1,270 +0,0 @@ -/* - * Palm Treo 680 configuration file - * - * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com> - * - * This file is released under the terms of GPL v2 and any later version. - * See the file COPYING in the root directory of the source tree for details. - * - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X -#define CONFIG_PALMTREO680 -#define CONFIG_MACH_TYPE MACH_TYPE_TREO680 - -#define CONFIG_SYS_MALLOC_LEN (4096*1024) - -#define CONFIG_LZMA - -/* - * Serial Console Configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 -#define CONFIG_BAUDRATE 9600 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_CONS_INDEX 3 - -/* we have nand (although technically nand *is* flash...) */ -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_LCD -/* #define CONFIG_KEYBOARD */ /* TODO */ - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_NAND - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC - -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION -#endif - -/* - * LCD - */ -#ifdef CONFIG_LCD -#define CONFIG_PXA_LCD -#define CONFIG_ACX544AKN -#define CONFIG_LCD_LOGO -#define LCD_BPP LCD_COLOR16 -#define CONFIG_FB_ADDR 0x5c000000 /* internal SRAM */ -#define CONFIG_CMD_BMP -#define CONFIG_SPLASH_SCREEN /* requires "splashimage" env var */ -#define CONFIG_SPLASH_SCREEN_ALIGN /* requires "splashpos" env var */ -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) - -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#define CONFIG_SYS_LONGHELP -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " -#else -#endif -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -/* - * Clock Configuration - */ -#define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */ - -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -/* - * GPIO settings - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x0E000000 -#define CONFIG_SYS_GAFR0_U_VAL 0xA500001A -#define CONFIG_SYS_GAFR1_L_VAL 0x60000002 -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA07959 -#define CONFIG_SYS_GAFR2_L_VAL 0x02AAAAAA -#define CONFIG_SYS_GAFR2_U_VAL 0x41440F08 -#define CONFIG_SYS_GAFR3_L_VAL 0x56AA95FF -#define CONFIG_SYS_GAFR3_U_VAL 0x00001401 -#define CONFIG_SYS_GPCR0_VAL 0x1FF80400 -#define CONFIG_SYS_GPCR1_VAL 0x03003FC1 -#define CONFIG_SYS_GPCR2_VAL 0x01C1E000 -#define CONFIG_SYS_GPCR3_VAL 0x01C1E000 -#define CONFIG_SYS_GPDR0_VAL 0xCFF90400 -#define CONFIG_SYS_GPDR1_VAL 0xFB22BFC1 -#define CONFIG_SYS_GPDR2_VAL 0x93CDFFDF -#define CONFIG_SYS_GPDR3_VAL 0x0069FF81 -#define CONFIG_SYS_GPSR0_VAL 0x02000018 -#define CONFIG_SYS_GPSR1_VAL 0x00000000 -#define CONFIG_SYS_GPSR2_VAL 0x000C0000 -#define CONFIG_SYS_GPSR3_VAL 0x00080000 - -#define CONFIG_SYS_PSSR_VAL 0x30 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x01ffffff -#define CONFIG_SYS_CCCR 0x02000210 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x7ff844c8 -#define CONFIG_SYS_MSC1_VAL 0x7ff86ab4 -#define CONFIG_SYS_MSC2_VAL 0x7ff87ff8 -#define CONFIG_SYS_MDCNFG_VAL 0x0B880acd -#define CONFIG_SYS_MDREFR_VAL 0x201fa031 -#define CONFIG_SYS_MDMRS_VAL 0x00320032 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 -#define CONFIG_SYS_MECR_VAL 0x00000003 -#define CONFIG_SYS_MCMEM0_VAL 0x0001c391 -#define CONFIG_SYS_MCMEM1_VAL 0x0001c391 -#define CONFIG_SYS_MCATT0_VAL 0x0001c391 -#define CONFIG_SYS_MCATT1_VAL 0x0001c391 -#define CONFIG_SYS_MCIO0_VAL 0x00014611 -#define CONFIG_SYS_MCIO1_VAL 0x0001c391 - -/* - * USB - */ -#define CONFIG_USB_DEVICE -#define CONFIG_USB_TTY -#define CONFIG_USB_DEV_PULLUP_GPIO 114 - -/* - * SPL - */ -#define CONFIG_SPL_TEXT_BASE 0xa1700000 /* IPL loads SPL here */ -#define CONFIG_SPL_STACK 0x5c040000 /* end of internal SRAM */ -#define CONFIG_SPL_NAND_SUPPORT /* build libnand for spl */ -#define CONFIG_SPL_NAND_DOCG4 /* use lean docg4 nand spl driver */ -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* spl uses memcpy */ - -/* - * NAND - */ -#define CONFIG_NAND_DOCG4 -#define CONFIG_SYS_NAND_SELF_INIT -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* only one device */ -#define CONFIG_SYS_NAND_BASE 0x00000000 /* mapped to reset vector */ -#define CONFIG_SYS_NAND_PAGE_SIZE 0x200 -#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 -#define CONFIG_BITREVERSE /* needed by docg4 driver */ -#define CONFIG_BCH /* needed by docg4 driver */ - -/* - * IMPORTANT NOTE: this is the size of the concatenated spl + u-boot image. It - * will be rounded up to the next 64k boundary (the spl flash block size), so it - * does not have to be exact, but you must ensure that it is not less than the - * actual image size, or it may fail to boot (bricked phone)! - * (Tip: reduces to three blocks with lcd and mmc support removed from u-boot.) -*/ -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 /* four 64k flash blocks */ - -/* - * This is the byte offset into the flash at which the concatenated spl + u-boot - * image is placed. It must be at the start of a block (256k boundary). Blocks - * 0 - 5 are write-protected, so we start at block 6. - */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x180000 /* block 6 */ - -/* DRAM address to which u-boot proper is loaded (before it relocates itself) */ -#define CONFIG_SYS_NAND_U_BOOT_DST 0xa0000000 -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST - -/* passed to linker by Makefile as arg to -Ttext option */ -#define CONFIG_SYS_TEXT_BASE 0xa0000000 - -#define CONFIG_SYS_INIT_SP_ADDR 0x5c040000 /* end of internal SRAM */ - -/* - * environment - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_BUILD_ENVCRC -#define CONFIG_ENV_SIZE 0x200 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_EXTRA_ENV_SETTINGS \ - "stdin=usbtty\0" \ - "stdout=usbtty\0" \ - "stderr=usbtty" -#define CONFIG_BOOTARGS "mtdparts=Msys_Diskonchip_G4:1536k(protected_part)ro,1024k(bootloader_part),-(filesys_part) \ -ip=192.168.11.102:::255.255.255.0:treo:usb0" -#define CONFIG_BOOTDELAY 3 - -#if 0 /* example: try 2nd mmc partition, then nand */ -#define CONFIG_BOOTCOMMAND \ - "mmc rescan; " \ - "if mmcinfo && ext2load mmc 0:2 0xa1000000 uImage; then " \ - "bootm 0xa1000000; " \ - "elif nand read 0xa1000000 0x280000 0x240000; then " \ - "bootm 0xa1000000; " \ - "fi; " -#endif - -/* u-boot lives at end of SDRAM, so use start of SDRAM for stand alone apps */ -#define CONFIG_STANDALONE_LOAD_ADDR 0xa0000000 - -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_SYS_ICACHE_OFF - -#endif /* __CONFIG_H */ diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h new file mode 100644 index 0000000000..150698ecaa --- /dev/null +++ b/include/configs/pcm052.h @@ -0,0 +1,281 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Configuration settings for the phytec PCM-052 SoM. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> + +#define CONFIG_VF610 + +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_THUMB_BUILD + +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* Enable passing of ATAGs */ +#define CONFIG_CMDLINE_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_FSL_LPUART +#define LPUART_BASE UART1_BASE + +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_UART_PORT (1) +#define CONFIG_BAUDRATE 115200 + +#undef CONFIG_CMD_IMLS + +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_SYS_NAND_ONFI_DETECTION + +#ifdef CONFIG_CMD_NAND +#define CONFIG_USE_ARCH_MEMCPY +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR + +#define CONFIG_JFFS2_NAND + +/* UBI */ +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_LZO + +/* Dynamic MTD partition support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define MTDIDS_DEFAULT "nand0=NAND" +#define MTDPARTS_DEFAULT "mtdparts=NAND:256k(spare)"\ + ",384k(bootloader)"\ + ",128k(env1)"\ + ",128k(env2)"\ + ",128k(dtb)"\ + ",6144k(kernel)"\ + ",65536k(ramdisk)"\ + ",450944k(root)" +#endif + +#define CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 1 + +/*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/ +#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_FEC_MXC_PHYADDR 0 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL + +/* QSPI Configs*/ +#define CONFIG_FSL_QSPI + +#ifdef CONFIG_FSL_QSPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_NUM 2 +#define CONFIG_SYS_FSL_QSPI_LE +#endif + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC_I2C3 +#define CONFIG_SYS_I2C_MXC + +/* RTC (actually an RV-4162 but M41T62-compatible) */ +#define CONFIG_CMD_DATE +#define CONFIG_RTC_M41T62 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_RTC_BUS_NUM 2 + +/* EEPROM (24FC256) */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_BUS 2 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x82000000 + +/* We boot from the gfxRAM area of the OCRAM. */ +#define CONFIG_SYS_TEXT_BASE 0x3f408000 +#define CONFIG_BOARD_SIZE_LIMIT 524288 + +#define CONFIG_BOOTCOMMAND "run bootcmd_sd" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "blimg_file=u-boot.imx\0" \ + "blsec_addr=0x81000000\0" \ + "blimg_addr=0x81000400\0" \ + "kernel_file=zImage\0" \ + "kernel_addr=0x82000000\0" \ + "fdt_file=vf610-pcm052.dtb\0" \ + "fdt_addr=0x81000000\0" \ + "ram_file=uRamdisk\0" \ + "ram_addr=0x83000000\0" \ + "filesys=rootfs.ubifs\0" \ + "sys_addr=0x81000000\0" \ + "tftploc=/path/to/tftp/directory/\0" \ + "nfs_root=/path/to/nfs/root\0" \ + "tftptimeout=1000\0" \ + "tftptimeoutcountmax=1000000\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "bootargs_base=setenv bootargs rw mem=256M " \ + "console=ttyLP1,115200n8\0" \ + "bootargs_sd=setenv bootargs ${bootargs} " \ + "root=/dev/mmcblk0p2 rootwait\0" \ + "bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \ + "nfsroot=${serverip}:${nfs_root},v3,tcp\0" \ + "bootargs_nand=setenv bootargs ${bootargs} " \ + "ubi.mtd=6 rootfstype=ubifs root=ubi0:rootfs\0" \ + "bootargs_ram=setenv bootargs ${bootargs} " \ + "root=/dev/ram rw initrd=${ram_addr}\0" \ + "bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \ + "fatload mmc 0:1 ${kernel_addr} ${kernel_file}; " \ + "fatload mmc 0:1 ${fdt_addr} ${fdt_file}; " \ + "bootz ${kernel_addr} - ${fdt_addr}\0" \ + "bootcmd_net=run bootargs_base bootargs_net bootargs_mtd; " \ + "tftpboot ${kernel_addr} ${tftpdir}${kernel_file}; " \ + "tftpboot ${fdt_addr} ${tftpdir}${fdt_file}; " \ + "bootz ${kernel_addr} - ${fdt_addr}\0" \ + "bootcmd_nand=run bootargs_base bootargs_nand bootargs_mtd; " \ + "nand read ${fdt_addr} dtb; " \ + "nand read ${kernel_addr} kernel; " \ + "bootz ${kernel_addr} - ${fdt_addr}\0" \ + "bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \ + "nand read ${fdt_addr} dtb; " \ + "nand read ${kernel_addr} kernel; " \ + "nand read ${ram_addr} ramdisk; " \ + "bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \ + "update_bootloader_from_tftp=mtdparts default; " \ + "nand read ${blsec_addr} bootloader; " \ + "mw.b ${blimg_addr} 0xff 0x5FC00; " \ + "if tftp ${blimg_addr} ${tftpdir}${blimg_file}; then " \ + "nand erase.part bootloader; " \ + "nand write ${blsec_addr} bootloader ${filesize}; fi\0" \ + "update_kernel_from_sd=if fatload mmc 0:2 ${kernel_addr} " \ + "${kernel_file}; " \ + "then mtdparts default; " \ + "nand erase.part kernel; " \ + "nand write ${kernel_addr} kernel ${filesize}; " \ + "if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \ + "nand erase.part dtb; " \ + "nand write ${fdt_addr} dtb ${filesize}; fi\0" \ + "update_kernel_from_tftp=if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \ + "then setenv fdtsize ${filesize}; " \ + "if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \ + "mtdparts default; " \ + "nand erase.part dtb; " \ + "nand write ${fdt_addr} dtb ${fdtsize}; " \ + "nand erase.part kernel; " \ + "nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \ + "update_rootfs_from_tftp=if tftp ${sys_addr} ${tftpdir}${filesys}; " \ + "then mtdparts default; " \ + "nand erase.part root; " \ + "ubi part root; " \ + "ubi create rootfs; " \ + "ubi write ${sys_addr} rootfs ${filesize}; fi\0" \ + "update_ramdisk_from_tftp=if tftp ${ram_addr} ${tftpdir}${ram_file}; " \ + "then mtdparts default; " \ + "nand erase.part ramdisk; " \ + "nand write ${ram_addr} ramdisk ${filesize}; fi\0" + +/* miscellaneous commands */ +#define CONFIG_CMD_ELF + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80010000 +#define CONFIG_SYS_MEMTEST_END 0x87C00000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* + * Stack sizes + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* Physical memory map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM (0x80000000) +#define PHYS_SDRAM_SIZE (256 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#ifdef CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_SIZE (8 * 1024) + +#define CONFIG_ENV_OFFSET (12 * 64 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + +#ifdef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_OFFSET 0xA0000 +#define CONFIG_ENV_SIZE_REDUND (8 * 1024) +#define CONFIG_ENV_OFFSET_REDUND 0xC0000 +#endif + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#endif diff --git a/include/configs/platinum.h b/include/configs/platinum.h index d65143240b..bb7e845183 100644 --- a/include/configs/platinum.h +++ b/include/configs/platinum.h @@ -45,6 +45,8 @@ /* I2C config */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h deleted file mode 100644 index 332d79f89f..0000000000 --- a/include/configs/pxa255_idp.h +++ /dev/null @@ -1,335 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * Copied from lubbock.h - * - * (C) Copyright 2004 - * BEC Systems <http://bec-systems.com> - * Cliff Brake <cliff.brake@gmail.com> - * Configuation settings for the Accelent/Vibren PXA255 IDP - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/pxa-regs.h> - -/* - * If we are developing, we might want to start U-Boot from RAM - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */ -#define CONFIG_SYS_TEXT_BASE 0x0 - -/* - * define the following to enable debug blinks. A debug blink function - * must be defined in memsetup.S - */ -#undef DEBUG_BLINK_ENABLE -#undef DEBUG_BLINKC_ENABLE - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_CPU_PXA25X 1 /* This is an PXA250 CPU */ - -#undef CONFIG_LCD -#ifdef CONFIG_LCD -#define CONFIG_PXA_LCD -#define CONFIG_SHARP_LM8V31 -#endif - -#define CONFIG_MMC 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_BOARD_LATE_INIT - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * PXA250 IDP memory map information - */ - -#define IDP_CS5_ETH_OFFSET 0x03400000 - - -/* - * Hardware drivers - */ -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300) -#define CONFIG_SMC_USE_32_BIT 1 -/* #define CONFIG_SMC_USE_IOFUNCS */ - -/* the following has to be set high -- suspect something is wrong with - * with the tftp timeout routines. FIXME!!! - */ -#define CONFIG_NET_RETRY_COUNT 100 - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */ -#define CONFIG_CONS_INDEX 3 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_DHCP - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND "bootm 40000" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -/* #define CONFIG_INITRD_TAG 1 */ - -/* - * Current memory map for Vibren supplied Linux images: - * - * Flash: - * 0 - 0x3ffff (size = 0x40000): bootloader - * 0x40000 - 0x13ffff (size = 0x100000): kernel - * 0x140000 - 0x1f3ffff (size = 0x1e00000): jffs - * - * RAM: - * 0xa0008000 - kernel is loaded - * 0xa3000000 - Uboot runs (48MB into RAM) - * - */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "prog_boot_mmc=" \ - "mw.b 0xa0000000 0xff 0x40000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0000000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x3ffff; " \ - "erase 0x0 0x3ffff; " \ - "cp.b 0xa0000000 0x0 0x40000; " \ - "reset;" \ - "fi\0" \ - "prog_uzImage_mmc=" \ - "mw.b 0xa0000000 0xff 0x100000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0000000 uzImage; " \ - "then " \ - "protect off 0x40000 0xfffff; " \ - "erase 0x40000 0xfffff; " \ - "cp.b 0xa0000000 0x40000 0x100000; " \ - "fi\0" \ - "prog_jffs_mmc=" \ - "mw.b 0xa0000000 0xff 0x1e00000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0000000 root.jffs; " \ - "then " \ - "protect off 0x140000 0x1f3ffff; " \ - "erase 0x140000 0x1f3ffff; " \ - "cp.b 0xa0000000 0x140000 0x1e00000; " \ - "fi\0" \ - "boot_mmc=" \ - "if mmcinit && " \ - "fatload mmc 0 0xa1000000 uzImage && " \ - "then " \ - "bootm 0xa1000000; " \ - "fi\0" \ - "prog_boot_net=" \ - "mw.b 0xa0000000 0xff 0x100000; " \ - "if bootp 0xa0000000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x3ffff; " \ - "erase 0x0 0x3ffff; " \ - "cp.b 0xa0000000 0x0 0x40000; " \ - "reset; " \ - "fi\0" \ - "prog_uzImage_net=" \ - "mw.b 0xa0000000 0xff 0x100000; " \ - "if bootp 0xa0000000 uzImage; " \ - "then " \ - "protect off 0x40000 0xfffff; " \ - "erase 0x40000 0xfffff; " \ - "cp.b 0xa0000000 0x40000 0x100000; " \ - "fi\0" \ - "prog_jffs_net=" \ - "mw.b 0xa0000000 0xff 0x1e00000; " \ - "if bootp 0xa0000000 root.jffs; " \ - "then " \ - "protect off 0x140000 0x1f3ffff; " \ - "erase 0x140000 0x1f3ffff; " \ - "cp.b 0xa0000000 0x140000 0x1e00000; " \ - "fi\0" - - -/* "erase_env=" */ -/* "protect off" */ - - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ -#else -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* default load address */ - -#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ - -#define RTC 1 /* enable 32KHz osc */ - -#ifdef CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 - -/* - * GPIO settings - */ - -#define CONFIG_SYS_GAFR0_L_VAL 0x80001005 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5128012 -#define CONFIG_SYS_GAFR1_L_VAL 0x699a9558 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5aa6a -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x2 -#define CONFIG_SYS_GPCR0_VAL 0x1800400 -#define CONFIG_SYS_GPCR1_VAL 0x0 -#define CONFIG_SYS_GPCR2_VAL 0x0 -#define CONFIG_SYS_GPDR0_VAL 0xc1818440 -#define CONFIG_SYS_GPDR1_VAL 0xfcffab82 -#define CONFIG_SYS_GPDR2_VAL 0x1ffff -#define CONFIG_SYS_GPSR0_VAL 0x8000 -#define CONFIG_SYS_GPSR1_VAL 0x3f0002 -#define CONFIG_SYS_GPSR2_VAL 0x1c000 - -#define CONFIG_SYS_PSSR_VAL 0x20 - -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 -#define CONFIG_SYS_CKEN 0x0 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x29DCA4D2 -#define CONFIG_SYS_MSC1_VAL 0x43AC494C -#define CONFIG_SYS_MSC2_VAL 0x39D449D4 -#define CONFIG_SYS_MDCNFG_VAL 0x090009C9 -#define CONFIG_SYS_MDREFR_VAL 0x0085C017 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000003 -#define CONFIG_SYS_MCMEM0_VAL 0x00014405 -#define CONFIG_SYS_MCMEM1_VAL 0x00014405 -#define CONFIG_SYS_MCATT0_VAL 0x00014405 -#define CONFIG_SYS_MCATT1_VAL 0x00014405 -#define CONFIG_SYS_MCIO0_VAL 0x00014405 -#define CONFIG_SYS_MCIO1_VAL 0x00014405 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_SYS_MONITOR_BASE 0 -#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* put cfg at end of flash for now */ -#define CONFIG_ENV_IS_IN_FLASH 1 - /* Addr of Environment Sector */ -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000) -#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16) - -#endif /* __CONFIG_H */ diff --git a/include/configs/qong.h b/include/configs/qong.h deleted file mode 100644 index f34a54f754..0000000000 --- a/include/configs/qong.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - * Copyright (C) 2009, Ilya Yanok, Emcraft Systems, <yanok@emcraft.com> - * - * Configuration settings for the Dave/DENX QongEVB-LITE board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - -/* High Level Configuration Options */ -#define CONFIG_MX31 /* This is a mx31 */ -#define CONFIG_QONG - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_SYS_TEXT_BASE 0xa0000000 - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1536 * 1024) - -/* - * Hardware drivers - */ - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -#define CONFIG_MXC_GPIO -#define CONFIG_HW_WATCHDOG -#define CONFIG_IMX_WATCHDOG - -#define CONFIG_MXC_SPI -#define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_RTC_MC13XXX - -#define CONFIG_POWER -#define CONFIG_POWER_SPI -#define CONFIG_POWER_FSL -#define CONFIG_FSL_PMIC_BUS 1 -#define CONFIG_FSL_PMIC_CS 0 -#define CONFIG_FSL_PMIC_CLK 100000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_FSL_PMIC_BITLEN 32 - -/* FPGA */ -#define CONFIG_FPGA -#define CONFIG_QONG_FPGA -#define CONFIG_FPGA_BASE (CS1_BASE) -#define CONFIG_FPGA_LATTICE -#define CONFIG_FPGA_COUNT 1 - -#ifdef CONFIG_QONG_FPGA -/* Ethernet */ -#define CONFIG_DNET -#define CONFIG_DNET_BASE (CS1_BASE + QONG_FPGA_PERIPH_SIZE) - -/* Framebuffer and LCD */ -#define CONFIG_VIDEO -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_MX3 -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SPLASH_SCREEN -#define CONFIG_CMD_BMP -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) - -/* USB */ -#define CONFIG_CMD_USB -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ -#define CONFIG_USB_EHCI_MXC -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORT 2 -#define CONFIG_MXC_USB_PORTSC (MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT) -#define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED -#define CONFIG_EHCI_IS_TDI -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_SUPPORT_VFAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#endif /* CONFIG_CMD_USB */ - -/* - * Reducing the ARP timeout from default 5 seconds to 200ms we speed up the - * initial TFTP transfer, should the user wish one, significantly. - */ -#define CONFIG_ARP_TIMEOUT 200UL - -#endif /* CONFIG_QONG_FPGA */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_SPI -#define CONFIG_CMD_UNZIP - -#define CONFIG_BOARD_LATE_INIT - -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttymxc0,${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addmisc=setenv bootargs ${bootargs}\0" \ - "uboot_addr=A0000000\0" \ - "kernel_addr=A00C0000\0" \ - "ramdisk_addr=A0300000\0" \ - "u-boot=qong/u-boot.bin\0" \ - "kernel_addr_r=80800000\0" \ - "hostname=qong\0" \ - "bootfile=qong/uImage\0" \ - "rootpath=/opt/eldk-4.2-arm/armVFP\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm\0" \ - "bootcmd=run flash_self\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\ - " +${filesize};cp.b ${fileaddr} " \ - __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ - "upd=run load update\0" \ - "videomode=video=ctfb:x:640,y:480,depth:16,mode:0,pclk:40000," \ - "le:120,ri:40,up:35,lo:10,hs:30,vs:3,sync:100663296," \ - "vmode:0\0" \ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* memtest works on first 255MB of RAM */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0xff000000) - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ - -#define CONFIG_MISC_INIT_R - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE -#define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */ - -/* - * NAND driver - */ - -#ifndef __ASSEMBLY__ -extern void qong_nand_plat_init(void *chip); -extern int qong_nand_rdy(void *chip); -#endif -#define CONFIG_NAND_PLAT -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE CS3_BASE -#define NAND_PLAT_INIT() qong_nand_plat_init(nand) - -#define QONG_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 24)) -#define QONG_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 23)) -#define QONG_NAND_WRITE(addr, cmd) \ - do { \ - __REG8(addr) = cmd; \ - } while (0) - -#define NAND_PLAT_WRITE_CMD(chip, cmd) QONG_NAND_WRITE(QONG_NAND_CLE(chip), cmd) -#define NAND_PLAT_WRITE_ADR(chip, cmd) QONG_NAND_WRITE(QONG_NAND_ALE(chip), cmd) -#define NAND_PLAT_DEV_READY(chip) (qong_nand_rdy(chip)) - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE CS0_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 -/* Monitor at beginning of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x80000) - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -/* Flash memory is CFI compliant */ -#define CONFIG_SYS_FLASH_CFI -/* Use drivers/cfi_flash.c */ -#define CONFIG_FLASH_CFI_DRIVER -/* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -/* Use hardware sector protection */ -#define CONFIG_SYS_FLASH_PROTECTION - -/* - * Filesystem - */ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_RBTREE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_CMD_MTDPARTS -#define CONFIG_LZO -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=physmap-flash.0," \ - "nand0=gen_nand" -#define MTDPARTS_DEFAULT \ - "mtdparts=physmap-flash.0:" \ - "512k(U-Boot),128k(env1),128k(env2)," \ - "2304k(kernel),13m(ramdisk),-(user);" \ - "gen_nand:" \ - "128m(nand)" - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) - -#define CONFIG_BOARD_EARLY_INIT_F - -#endif /* __CONFIG_H */ diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h deleted file mode 100644 index a0120b06fd..0000000000 --- a/include/configs/rd6281a.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_RD6281A_H -#define _CONFIG_RD6281A_H - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-RD6281A" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_MACH_RD6281A /* Machine type */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_FAT -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_IDE - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* - * Environment variables configurations - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -#endif -/* - * max 4k env size is enough, but in case of nand - * it has to be rounded to sector size - */ -#define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_OFFSET 0x40000 /* env starts here */ - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "${x_bootcmd_usb}; bootm 0x6400000;" - -#define CONFIG_MTDPARTS "orion_nand:512k(uboot)," \ - "3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0" - -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ - "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE -#define CONFIG_DIS_AUTO_NEG_SPEED_GMII /*Disable Auto speed negociation */ -#define CONFIG_PHY_SPEED _1000BASET /*Force PHYspeed to 1GBPs */ -#define CONFIG_PHY_BASE_ADR 0x0A -#define CONFIG_MV88E61XX_SWITCH /* Enable MV88E61XX switch driver */ -#endif /* CONFIG_CMD_NET */ - -/* - * SATA Driver configuration - */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif /*CONFIG_MVSATA_IDE*/ - -#endif /* _CONFIG_RD6281A_H */ diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h deleted file mode 100644 index d4ffb467bd..0000000000 --- a/include/configs/scb9328.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - * Copyright (C) 2003 ETC s.r.o. - * - * SPDX-License-Identifier: GPL-2.0+ - * Written by Peter Figuli <peposh@etc.sk>, 2003. - * - * 2003/13/06 Initial MP10 Support copied from wepep250 - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_IMX 1 /* This is a Motorola MC9328MXL Chip */ -#define CONFIG_SCB9328 1 /* on a scb9328tronix board */ - -#define CONFIG_IMX_SERIAL -#define CONFIG_IMX_SERIAL1 -/* - * Select serial console configuration - */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -/* - * Boot options. Setting delay to -1 stops autostart count down. - * NOTE: Sending parameters to kernel depends on kernel version and - * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept - * parameters at all! Do not get confused by them so. - */ -#define CONFIG_BOOTDELAY -1 -#define CONFIG_BOOTARGS "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328" -#define CONFIG_BOOTCOMMAND "bootm 10040000" -#define CONFIG_SHOW_BOOT_PROGRESS -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 10.10.10.9 -#define CONFIG_SERVERIP 10.10.10.10 - -/* - * General options for u-boot. Modify to save memory foot print - */ -#define CONFIG_SYS_LONGHELP /* undef saves memory */ -#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */ - -#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */ -#define CONFIG_SYS_MEMTEST_END 0x08F00000 - -#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */ - -#define CONFIG_BAUDRATE 115200 -/* - * Definitions related to passing arguments to kernel. - */ -#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ -#define CONFIG_INITRD_TAG 1 /* send initrd params */ - -/* - * Malloc pool need to host env + 128 Kb reserve for other allocations. - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) - -/* SDRAM Setup Values -0x910a8300 Precharge Command CAS 3 -0x910a8200 Precharge Command CAS 2 - -0xa10a8300 AutoRefresh Command CAS 3 -0xa10a8200 Set AutoRefresh Command CAS 2 */ - -#define PRECHARGE_CMD 0x910a8200 -#define AUTOREFRESH_CMD 0xa10a8200 - -/* - * SDRAM Memory Map - */ -/* SH FIXME */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ -#define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1 */ -#define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */ - -#define CONFIG_SYS_TEXT_BASE 0x10000000 - -#define CONFIG_SYS_SDRAM_BASE SCB9328_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (SCB9328_SDRAM_1 + 0xf00000) - -/* - * Configuration for FLASH memory for the Synertronixx board - */ - -/* #define SCB9328_FLASH_32M */ - -/* 32MB */ -#ifdef SCB9328_FLASH_32M -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */ -#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */ -#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */ -#define SCB9328_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank */ -#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */ -#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */ -#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */ -#else - -/* 16MB */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */ -#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */ -#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */ -#define SCB9328_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank */ -#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */ -#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */ -#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */ -#endif /* SCB9328_FLASH_32M */ - -/* This should be defined if CFI FLASH device is present. Actually benefit - is not so clear to me. In other words we can provide more informations - to user, but this expects more complex flash handling we do not provide - now.*/ -#undef CONFIG_SYS_FLASH_CFI - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* timeout for Erase operation */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 /* timeout for Write operation */ - -#define CONFIG_SYS_FLASH_BASE SCB9328_FLASH_BASE - -/* - * This is setting for JFFS2 support in u-boot. - * Right now there is no gain for user, but later on booting kernel might be - * possible. Consider using XIP kernel running from flash to save RAM - * footprint. - * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. - */ -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 5 -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -/* - * Environment setup. Definitions of monitor location and size with - * definition of environment setup ends up in 2 possibilities. - * 1. Embeded environment - in u-boot code is space for environment - * 2. Environment is read from predefined sector of flash - * Right now we support 2. possiblity, but expecting no env placed - * on mentioned address right now. This also needs to provide whole - * sector for it - for us 256Kb is really waste of memory. U-boot uses - * default env. and until kernel parameters could be sent to kernel - * env. has no sense to us. - */ - -/* Setup for PA23 which is Reset Default PA23 but has to become - CS5 */ - -#define CONFIG_SYS_GPR_A_VAL 0x00800000 -#define CONFIG_SYS_GIUS_A_VAL 0x0043fffe - -#define CONFIG_SYS_MONITOR_BASE 0x10000000 -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */ -#define CONFIG_ENV_SIZE 0x20000 - -#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */ - -/* - * CSxU_VAL: - * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32 - * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC | - * - * CSxL_VAL: - * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0 - * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN| - */ - -#define CONFIG_SYS_CS0U_VAL 0x000F2000 -#define CONFIG_SYS_CS0L_VAL 0x11110d01 -#define CONFIG_SYS_CS1U_VAL 0x000F0a00 -#define CONFIG_SYS_CS1L_VAL 0x11110601 -#define CONFIG_SYS_CS2U_VAL 0x0 -#define CONFIG_SYS_CS2L_VAL 0x0 - -#define CONFIG_SYS_CS3U_VAL 0x000FFFFF -#define CONFIG_SYS_CS3L_VAL 0x00000303 - -#define CONFIG_SYS_CS4U_VAL 0x000F0a00 -#define CONFIG_SYS_CS4L_VAL 0x11110301 - -/* CNC == 3 too long - #define CONFIG_SYS_CS5U_VAL 0x0000C210 */ - -/* #define CONFIG_SYS_CS5U_VAL 0x00008400 - mal laenger mahcen, ob der bei 150MHz laenger haelt dann und - kaum langsamer ist */ -/* #define CONFIG_SYS_CS5U_VAL 0x00009400 - #define CONFIG_SYS_CS5L_VAL 0x11010D03 */ - -#define CONFIG_SYS_CS5U_VAL 0x00008400 -#define CONFIG_SYS_CS5L_VAL 0x00000D03 - -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x16000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE+4) - -/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1) - f_ref=16,777MHz - - 0x002a141f: 191,9944MHz - 0x040b2007: 144MHz - 0x042a141f: 96MHz - 0x0811140d: 64MHz - 0x040e200e: 150MHz - 0x00321431: 200MHz - - 0x08001800: 64MHz mit 16er Quarz - 0x04001800: 96MHz mit 16er Quarz - 0x04002400: 144MHz mit 16er Quarz - - 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0 - |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */ - -#define CPU200 - -#ifdef CPU200 -#define CONFIG_SYS_MPCTL0_VAL 0x00321431 -#else -#define CONFIG_SYS_MPCTL0_VAL 0x040e200e -#endif - -/* #define BUS64 */ -#define BUS72 - -#ifdef BUS72 -#define CONFIG_SYS_SPCTL0_VAL 0x04002400 -#endif - -#ifdef BUS96 -#define CONFIG_SYS_SPCTL0_VAL 0x04001800 -#endif - -#ifdef BUS64 -#define CONFIG_SYS_SPCTL0_VAL 0x08001800 -#endif - -/* Das ist der BCLK Divider, der aus der System PLL - BCLK und HCLK erzeugt: - 31 | xxxx xxxx xxxx xxxx xx10 11xx xxxx xxxx | 0 - 0x2f008403 : 192MHz/2=96MHz, 144MHz/2=72MHz PRESC=1->BCLKDIV=2 - 0x2f008803 : 192MHz/3=64MHz, 240MHz/3=80MHz PRESC=1->BCLKDIV=2 - 0x2f001003 : 192MHz/5=38,4MHz - 0x2f000003 : 64MHz/1 - Bit 22: SPLL Restart - Bit 21: MPLL Restart */ - -#ifdef BUS64 -#define CONFIG_SYS_CSCR_VAL 0x2f030003 -#endif - -#ifdef BUS72 -#define CONFIG_SYS_CSCR_VAL 0x2f030403 -#endif - -/* - * Well this has to be defined, but on the other hand it is used differently - * one may expect. For instance loadb command do not cares :-) - * So advice is - do not relay on this... - */ -#define CONFIG_SYS_LOAD_ADDR 0x08400000 - -#define MHZ16QUARZINUSE - -#ifdef MHZ16QUARZINUSE -#define CONFIG_SYSPLL_CLK_FREQ 16000000 -#else -#define CONFIG_SYSPLL_CLK_FREQ 16780000 -#endif - -#define CONFIG_SYS_CLK_FREQ 16780000 - -/* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */ -#define CONFIG_SYS_FMCR_VAL 0x00000001 - -/* Bit[0:3] contain PERCLK1DIV for UART 1 - 0x000b00b ->b<- -> 192MHz/12=16MHz - 0x000b00b ->8<- -> 144MHz/09=16MHz - 0x000b00b ->3<- -> 64MHz/4=16MHz */ - -#ifdef BUS96 -#define CONFIG_SYS_PCDR_VAL 0x000b00b5 -#endif - -#ifdef BUS64 -#define CONFIG_SYS_PCDR_VAL 0x000b00b3 -#endif - -#ifdef BUS72 -#define CONFIG_SYS_PCDR_VAL 0x000b00b8 -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index d189c3fde9..e11c016aed 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -117,6 +117,9 @@ * */ #define CONFIG_MACB +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 #define CONFIG_RMII /* use reduced MII inteface */ #define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */ #define CONFIG_AT91_WANTS_COMMON_PHY @@ -182,6 +185,7 @@ /* General Boot Parameter */ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "run flashboot" +#define CONFIG_BOOT_RETRY_TIME 30 #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/snowball.h b/include/configs/snowball.h deleted file mode 100644 index de03e76ba1..0000000000 --- a/include/configs/snowball.h +++ /dev/null @@ -1,232 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * #define DEBUG 1 - */ - -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SNOWBALL -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOARD_LATE_INIT - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_U8500 - -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF - -/*----------------------------------------------------------------------- - * Size of environment and malloc() pool - */ -/* - * If you use U-Boot as crash kernel, make sure that it does not overwrite - * information saved by kexec during panic. Kexec expects the start - * address of the executable 32K above "crashkernel" address. - */ -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (8*1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) - -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_CMD_ENV -#define CONFIG_ENV_OFFSET 0x0118000 -#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ - -/* - * PL011 Configuration - */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_SERIAL_RLCR -#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT - -/* - * U8500 UART registers base for 3 serial devices - */ -#define CFG_UART0_BASE 0x80120000 -#define CFG_UART1_BASE 0x80121000 -#define CFG_UART2_BASE 0x80007000 -#define CFG_SERIAL0 CFG_UART0_BASE -#define CFG_SERIAL1 CFG_UART1_BASE -#define CFG_SERIAL2 CFG_UART2_BASE -#define CONFIG_PL011_CLOCK 38400000 -#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \ - (void *)CFG_SERIAL2 } -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Devices and file systems - */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION - -/* - * Commands - */ -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 - -#ifndef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 1 -#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ -"mmc dev 1; " \ - "if run loadbootscript; " \ - "then run bootscript; " \ - "else " \ - "if run mmcload; " \ - "then run mmcboot; " \ - "else " \ - "mmc dev 0; " \ - "if run emmcloadbootscript; " \ - "then run bootscript; " \ - "else " \ - "if run emmcload; " \ - "then run emmcboot; " \ - "else " \ - "echo No media to boot from; " \ - "fi; " \ - "fi; " \ - "fi; " \ - "fi; " - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=0x00100000\0" \ - "console=ttyAMA2,115200n8\0" \ - "loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0" \ - "emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript " \ - "from mmc ...; source ${loadaddr}\0" \ - "memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M " \ - "hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0" \ - "memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M " \ - "mem=64M@160M mem_mali=32M@224M " \ - "pmem_hwb=128M@256M mem=128M@384M\0" \ - "memargs1024=mem=128M@0 mali.mali_mem=32M@128M " \ - "hwmem=168M@M160M mem=48M@328M " \ - "mem_issw=1M@383M mem=640M@384M\0" \ - "memargs=setenv bootargs ${bootargs} ${memargs1024}\0" \ - "emmcload=fatload mmc 0:2 ${loadaddr} uImage\0" \ - "mmcload=fatload mmc 1:1 ${loadaddr} uImage\0" \ - "commonargs=setenv bootargs console=${console} " \ - "vmalloc=300M\0" \ - "emmcargs=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk0p3 " \ - "rootwait\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console}\0" \ - "emmcboot=echo Booting from eMMC ...; " \ - "run commonargs emmcargs memargs; " \ - "bootm ${loadaddr}\0" \ - "mmcargs=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk1p2 " \ - "rootwait earlyprintk\0" \ - "mmcboot=echo Booting from external MMC ...; " \ - "run commonargs mmcargs memargs; " \ - "bootm ${loadaddr}\0" \ - "fdt_high=0x2BC00000\0" \ - "stdout=serial,usbtty\0" \ - "stdin=serial,usbtty\0" \ - "stderr=serial,usbtty\0" - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SETUP_MEMORY_TAGS 2 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ - -/* - * additions for new relocation code - */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET - -/* landing address before relocation */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x0 -#endif - -/* - * MMC related configs - */ -#define CONFIG_ARM_PL180_MMCI -#define MMC_BLOCK_SIZE 512 -#define CFG_EMMC_BASE 0x80114000 -#define CFG_MMC_BASE 0x80126000 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_NO_FLASH - -/* - * base register values for U8500 - */ -#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock */ - - -/* - * U8500 GPIO register base for 9 banks - */ -#define CONFIG_DB8500_GPIO -#define CFG_GPIO_0_BASE 0x8012E000 -#define CFG_GPIO_1_BASE 0x8012E080 -#define CFG_GPIO_2_BASE 0x8000E000 -#define CFG_GPIO_3_BASE 0x8000E080 -#define CFG_GPIO_4_BASE 0x8000E100 -#define CFG_GPIO_5_BASE 0x8000E180 -#define CFG_GPIO_6_BASE 0x8011E000 -#define CFG_GPIO_7_BASE 0x8011E080 -#define CFG_GPIO_8_BASE 0xA03FE000 - -#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/socfpga_arria5.h b/include/configs/socfpga_arria5_socdk.h index 3193684798..b75b0a27fa 100644 --- a/include/configs/socfpga_arria5.h +++ b/include/configs/socfpga_arria5_socdk.h @@ -59,6 +59,10 @@ #endif +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ +#define CONFIG_ENV_OFFSET 512 /* just after the MBR */ + /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 38ae763653..cece0950e2 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -73,7 +73,6 @@ /* * Cache */ -#define CONFIG_SYS_ARM_CACHE_WRITEALLOC #define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS @@ -282,7 +281,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE -#define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE 4096 /* diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5_socdk.h index 9e733e5c48..fa67b25a79 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5_socdk.h @@ -59,6 +59,10 @@ #endif +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ +#define CONFIG_ENV_OFFSET 512 /* just after the MBR */ + /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h index 2508d037e3..191e1f7a43 100644 --- a/include/configs/socfpga_de0_nano_soc.h +++ b/include/configs/socfpga_de0_nano_soc.h @@ -55,6 +55,10 @@ #endif +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ +#define CONFIG_ENV_OFFSET 512 /* just after the MBR */ + /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS diff --git a/include/configs/socfpga_mcvevk.h b/include/configs/socfpga_mcvevk.h index c5b4b4ca9d..65816a05cf 100644 --- a/include/configs/socfpga_mcvevk.h +++ b/include/configs/socfpga_mcvevk.h @@ -43,6 +43,12 @@ #define CONFIG_LOADADDR 0x01000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +/* Environment is in MMC */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ +#define CONFIG_ENV_OFFSET 512 /* just after the MBR */ + /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h index 747e988ac9..6c71ef4e23 100644 --- a/include/configs/socfpga_sockit.h +++ b/include/configs/socfpga_sockit.h @@ -59,6 +59,10 @@ #endif +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ +#define CONFIG_ENV_OFFSET 512 /* just after the MBR */ + /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index fb1bf66d02..edae831f22 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -97,7 +97,6 @@ #define CONFIG_NAND_FSMC #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_QUIET_TEST /* * Command support defines diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h deleted file mode 100644 index 87df70bdac..0000000000 --- a/include/configs/stamp9g20.h +++ /dev/null @@ -1,244 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * (C) Copyright 2010 - * Achim Ehrlich <aehrlich@taskit.de> - * taskit GmbH <www.taskit.de> - * - * (C) Copyright 2012 - * Markus Hubig <mhubig@imko.de> - * IMKO GmbH <www.imko.de> - * - * Configuation settings for the stamp9g20 CPU module. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include <asm/hardware.h> - -/* - * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot - * program. Since the linker has to swallow that define, we must use a pure - * hex number here! - */ -#define CONFIG_SYS_TEXT_BASE 0x23f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */ - -/* misc settings */ -#define CONFIG_CMDLINE_TAG /* pass commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS /* pass memory defs to kernel */ -#define CONFIG_INITRD_TAG /* pass initrd param to kernel */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_BOARD_EARLY_INIT_f /* call board_early_init_f() */ -#define CONFIG_BOARD_POSTCLK_INIT /* call board_postclk_init() */ -#define CONFIG_DISPLAY_CPUINFO /* display CPU Info at startup */ - -/* setting board specific options */ -#ifdef CONFIG_PORTUXG20 -# define CONFIG_MACH_TYPE MACH_TYPE_PORTUXG20 -# define CONFIG_MACB -#else -# define CONFIG_MACH_TYPE MACH_TYPE_STAMP9G20 -#endif - -/* - * SDRAM: 1 bank, 64 MB, base address 0x20000000 - * Already initialized before u-boot gets started. - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE (64 << 20) - -/* - * Perform a SDRAM Memtest from the start of SDRAM - * till the beginning of the U-Boot position in RAM. - */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + (128 << 10), 0x1000) - -/* - * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, - * leaving the correct space for initial global data structure above that - * address while providing maximum stack area below. - */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) - -/* NAND flash settings */ -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 - -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO /* enable the GPIO features */ -#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ - -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_BAUDRATE 115200 - -/* LED configuration */ -#define CONFIG_STATUS_LED -#define CONFIG_BOARD_SPECIFIC_LED - -/* The LED PINs */ -#define CONFIG_RED_LED AT91_PIN_PC5 -#define CONFIG_GREEN_LED AT91_PIN_PC4 -#define CONFIG_YELLOW_LED AT91_PIN_PC10 - -#define STATUS_LED_RED 0 -#define STATUS_LED_GREEN 1 -#define STATUS_LED_YELLOW 2 - -/* Red LED */ -#define STATUS_LED_BIT STATUS_LED_RED -#define STATUS_LED_STATE STATUS_LED_OFF -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) - -/* Green LED */ -#define STATUS_LED_BIT1 STATUS_LED_GREEN -#define STATUS_LED_STATE1 STATUS_LED_ON -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) - -/* Yellow LED */ -#define STATUS_LED_BIT2 STATUS_LED_YELLOW -#define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) - -/* Boot status LED */ -#define STATUS_LED_BOOT STATUS_LED_GREEN - -/* - * Ethernet configuration - * - * PortuxG20 has always ethernet but for Stamp9G20 you - * can enable it here if your baseboard features ethernet. - */ - -#define CONFIG_MACB -#define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_ASIX -#define CONFIG_USB_ETHER_MCS7830 - -#ifdef CONFIG_MACB -# define CONFIG_RMII /* use reduced MII inteface */ -# define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */ -#define CONFIG_AT91_WANTS_COMMON_PHY - -/* BOOTP and DHCP options */ -# define CONFIG_BOOTP_BOOTFILESIZE -# define CONFIG_BOOTP_BOOTPATH -# define CONFIG_BOOTP_GATEWAY -# define CONFIG_BOOTP_HOSTNAME -# define CONFIG_NFSBOOTCOMMAND \ - "setenv autoload yes; setenv autoboot yes; " \ - "setenv bootargs ${basicargs} ${mtdparts} " \ - "root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; " \ - "dhcp" -#endif /* CONFIG_MACB */ - -/* Enable the watchdog */ -#define CONFIG_AT91SAM9_WATCHDOG -#define CONFIG_HW_WATCHDOG - -/* USB configuration */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 - -/* General Boot Parameter */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND "run flashboot" -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING - -/* - * RAM Memory address where to put the - * Linux Kernel befor starting. - */ -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - -/* - * The NAND Flash partitions: - * ========================================== - * 0x0000000-0x001ffff -> 128k, bootstrap - * 0x0020000-0x005ffff -> 256k, u-boot - * 0x0060000-0x007ffff -> 128k, env1 - * 0x0080000-0x009ffff -> 128k, env2 (backup) - * 0x0100000-0x06fffff -> 6M, kernel - * 0x0700000-0x8000000 -> 121M, RootFS - */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET ((128 + 256) << 10) -#define CONFIG_ENV_OFFSET_REDUND ((128 + 256 + 128) << 10) -#define CONFIG_ENV_SIZE (128 << 10) - -/* - * Predefined environment variables. - * Usefull to define some easy to use boot commands. - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - \ - "basicargs=console=ttyS0,115200\0" \ - \ - "mtdparts=mtdparts=atmel_nand:128k(bootstrap)ro," \ - "256k(uboot)ro,128k(env1)ro," \ - "128k(env2)ro,6M(linux),-(root)rw\0" \ - \ - "flashboot=setenv bootargs ${basicargs} ${mtdparts} " \ - "root=/dev/mtdblock5 rootfstype=jffs2; " \ - "nand read 0x22000000 0x100000 0x600000; " \ - "bootm 22000000\0" \ - \ - "sdboot=setenv bootargs ${basicargs} ${mtdparts} " \ - "root=/dev/mmcblk0p1 rootwait; " \ - "nand read 0x22000000 0x100000 0x600000; " \ - "bootm 22000000" - -/* Command line & features configuration */ -#define CONFIG_CMD_NAND -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT -#define CONFIG_CMD_LED - -#ifdef CONFIG_MACB -# define CONFIG_CMD_PING -# define CONFIG_CMD_DHCP -#endif /* CONFIG_MACB */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/stout.h b/include/configs/stout.h new file mode 100644 index 0000000000..87ea530948 --- /dev/null +++ b/include/configs/stout.h @@ -0,0 +1,112 @@ +/* + * include/configs/stout.h + * This file is Stout board configuration. + * + * Copyright (C) 2015 Renesas Electronics Europe GmbH + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __STOUT_H +#define __STOUT_H + +#undef DEBUG +#define CONFIG_R8A7790 +#define CONFIG_RMOBILE_BOARD_STRING "Stout" + +#include "rcar-gen2-common.h" + +/* #define CONFIG_BOARD_LATE_INIT */ + +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0xB0000000 +#else +#define CONFIG_SYS_TEXT_BASE 0xE8080000 +#endif + +/* STACK */ +#if defined(CONFIGF_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0xB003FFFC +#else +#define CONFIG_SYS_INIT_SP_ADDR 0xE827FFFC +#endif +#define STACK_AREA_SIZE 0xC000 +#define LOW_LEVEL_MERAM_STACK \ + (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + +/* MEMORY */ +#define RCAR_GEN2_SDRAM_BASE 0x40000000 +#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) +#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE +#define CONFIG_SCIF_A + +/* SPI */ +#define CONFIG_SPI +#define CONFIG_SH_QSPI +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_QUAD +#define CONFIG_SYS_NO_FLASH + +/* SH Ether */ +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_RCAR +#define CONFIG_SYS_RCAR_I2C0_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C1_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C2_SPEED 400000 +#define CONFIG_SYS_RCAR_I2C3_SPEED 400000 +#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ + +/* Board Clock */ +#define RMOBILE_XTAL_CLK 20000000u +#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ +#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) +#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2) +#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15) +#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12) + +#define CONFIG_SYS_TMU_CLK_DIV 4 + +/* USB */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_RMOBILE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_USB_STORAGE + +/* MMC */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC + +/* Module stop status bits */ +/* INTC-RT */ +#define CONFIG_SMSTP0_ENA 0x00400000 +/* MSIF, SCIFA0 */ +#define CONFIG_SMSTP2_ENA 0x00002010 +/* INTC-SYS, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 + +/* SDHI */ +#define CONFIG_SH_SDHI_FREQ 97500000 + +#endif /* __STOUT_H */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 48cc4ed6f6..e1ba7914cd 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -13,6 +13,7 @@ #ifndef _SUNXI_COMMON_CONFIG_H #define _SUNXI_COMMON_CONFIG_H +#include <asm/arch/cpu.h> #include <linux/stringify.h> #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT @@ -39,23 +40,14 @@ #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ #endif -#include <asm/arch/cpu.h> /* get chip and board defs */ - -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM_SERIAL) -# define CONFIG_DW_SERIAL -#endif - -/* - * Display CPU information - */ -#define CONFIG_DISPLAY_CPUINFO - /* Serial & console */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL /* ns16550 reg in the low bits of cpu reg */ #define CONFIG_SYS_NS16550_CLK 24000000 -#ifndef CONFIG_DM_SERIAL +#ifdef CONFIG_DM_SERIAL +# define CONFIG_DW_SERIAL +#else # define CONFIG_SYS_NS16550_REG_SIZE -4 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE @@ -65,6 +57,7 @@ #endif /* CPU */ +#define CONFIG_DISPLAY_CPUINFO #define CONFIG_SYS_CACHELINE_SIZE 64 /* @@ -152,8 +145,8 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ #endif -/* 4MB of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) +/* 64MB of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) /* * Miscellaneous configurable options @@ -282,11 +275,7 @@ extern int soft_i2c_gpio_scl; * The amount of RAM to keep free at the top of RAM when relocating u-boot, * to use as framebuffer. This must be a multiple of 4096. */ -#ifdef CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804 -#define CONFIG_SUNXI_MAX_FB_SIZE (12 << 20) -#else -#define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20) -#endif +#define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) /* Do we want to initialize a simple FB? */ #define CONFIG_VIDEO_DT_SIMPLEFB @@ -393,12 +382,12 @@ extern int soft_i2c_gpio_scl; #define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */ /* - * 240M RAM (256M minimum minus space for the framebuffer), + * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, * 1M script, 1M pxe and the ramdisk at the end. */ #define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0xf000000\0" \ + "bootm_size=0xa000000\0" \ "kernel_addr_r=" __stringify(SDRAM_OFFSET(2000000)) "\0" \ "fdt_addr_r=" __stringify(SDRAM_OFFSET(3000000)) "\0" \ "scriptaddr=" __stringify(SDRAM_OFFSET(3100000)) "\0" \ @@ -423,7 +412,18 @@ extern int soft_i2c_gpio_scl; #define BOOT_TARGET_DEVICES_USB(func) #endif +/* FEL boot support, auto-execute boot.scr if a script address was provided */ +#define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ + "bootcmd_fel=" \ + "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ + "echo '(FEL boot)'; " \ + "source ${fel_scriptaddr}; " \ + "fi\0" +#define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ + "fel " + #define BOOT_TARGET_DEVICES(func) \ + func(FEL, fel, na) \ BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_SCSI(func) \ BOOT_TARGET_DEVICES_USB(func) \ diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 408895f332..bd1c07c3eb 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -126,7 +126,6 @@ /* * Board NAND Info. */ -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ /* to access nand */ diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 66cb274f68..17b0213362 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -20,7 +20,7 @@ #define CONFIG_SYS_HZ 1000 -#define CONFIG_IMX6_THERMAL +#define CONFIG_IMX_THERMAL /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 @@ -167,6 +167,8 @@ #ifdef CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_I2C_EDID @@ -190,7 +192,7 @@ "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \ "rdinit=/sbin/init enable_wait_mode=off\0" \ "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \ - "mmc read 0x10800000 0x800 0x4000; bootm\0" \ + "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \ "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \ "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \ "run bootargs_upd; " \ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index e67ff7b957..651c4c4935 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -8,6 +8,21 @@ #ifndef __TEGRA_COMMON_POST_H #define __TEGRA_COMMON_POST_H +/* + * Size of malloc() pool + */ +#ifdef CONFIG_USB_FUNCTION_DFU +#define CONFIG_SYS_MALLOC_LEN (SZ_4M + \ + CONFIG_SYS_DFU_DATA_BUF_SIZE + \ + CONFIG_SYS_DFU_MAX_FILE_SIZE) +#else +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ +#endif + +#ifndef CONFIG_ARM64 +#define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */ +#endif + #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ diff --git a/include/configs/tegra-common-usb-gadget.h b/include/configs/tegra-common-usb-gadget.h index e51da3f405..f6e1d5c4db 100644 --- a/include/configs/tegra-common-usb-gadget.h +++ b/include/configs/tegra-common-usb-gadget.h @@ -30,7 +30,8 @@ #define CONFIG_CMD_USB_MASS_STORAGE /* DFU protocol */ #define CONFIG_USB_FUNCTION_DFU -#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024) +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M +#define CONFIG_SYS_DFU_MAX_FILE_SIZE SZ_32M #define CONFIG_CMD_DFU #ifdef CONFIG_MMC #define CONFIG_DFU_MMC @@ -38,6 +39,7 @@ #ifdef CONFIG_SPI_FLASH #define CONFIG_DFU_SF #endif +#define CONFIG_DFU_RAM #endif #endif /* _TEGRA_COMMON_USB_GADGET_H_ */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 6fe5f2ce65..1c469d092e 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -37,20 +37,6 @@ #define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */ /* - * Size of malloc() pool - */ -#ifdef CONFIG_DFU_MMC -#define CONFIG_SYS_MALLOC_LEN ((4 << 20) + \ - CONFIG_SYS_DFU_DATA_BUF_SIZE) -#else -#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ -#endif - -#ifndef CONFIG_ARM64 -#define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */ -#endif - -/* * NS16550 Configuration */ #define CONFIG_TEGRA_SERIAL @@ -154,6 +140,8 @@ #ifndef CONFIG_SPL_BUILD #include <config_distro_defaults.h> +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_FAT_WRITE #endif #endif /* _TEGRA_COMMON_H_ */ diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index 252e607d73..671071ba98 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -34,7 +34,7 @@ /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_SYS_TEXT_BASE 0x8010E000 +#define CONFIG_SYS_TEXT_BASE 0x80110000 /* * Memory layout for where various images get loaded by boot scripts: diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 0841f33bfc..00e85c48c4 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -32,7 +32,7 @@ /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_SYS_TEXT_BASE 0x0010E000 +#define CONFIG_SYS_TEXT_BASE 0x00110000 /* * Memory layout for where various images get loaded by boot scripts: diff --git a/include/configs/tegra210-common.h b/include/configs/tegra210-common.h index e6c815212d..8f35a7bf3d 100644 --- a/include/configs/tegra210-common.h +++ b/include/configs/tegra210-common.h @@ -26,7 +26,7 @@ /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_SYS_TEXT_BASE 0x8010E000 +#define CONFIG_SYS_TEXT_BASE 0x80110000 /* Generic Interrupt Controller */ #define CONFIG_GICV2 diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index 3e8e3c1e5b..9afd86484b 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -31,7 +31,7 @@ /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_SYS_TEXT_BASE 0x8010E000 +#define CONFIG_SYS_TEXT_BASE 0x80110000 /* * Memory layout for where various images get loaded by boot scripts: diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 7fa35a1542..ceeb7fe46b 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -21,6 +21,7 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_OMAP #define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD #include <asm/arch/omap.h> diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 01d8233741..4c192896ad 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -15,6 +15,7 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_OMAP #define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 18fca02c4c..6dc6515899 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -58,6 +58,15 @@ "ramdisk_addr_r=0x88080000\0" \ "bootm_size=0x10000000\0" +#define DEFAULT_MMC_TI_ARGS \ + "mmcdev=0\0" \ + "mmcrootfstype=ext4 rootwait\0" \ + "finduuid=part uuid mmc 0:2 uuid\0" \ + "args_mmc=run finduuid;setenv bootargs console=${console} " \ + "${optargs} " \ + "root=PARTUUID=${uuid} rw " \ + "rootfstype=${mmcrootfstype}\0" + /* * Default to a quick boot delay. */ diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index be231a5513..e399a879ac 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -66,7 +66,7 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* TWL4030 */ -#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_POWER /* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800 diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 2eaa3b61b4..1cd7dae85b 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -83,6 +83,7 @@ */ #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ + DEFAULT_MMC_TI_ARGS \ "console=ttyO2,115200n8\0" \ "fdtfile=undefined\0" \ "bootpart=0:2\0" \ @@ -90,13 +91,6 @@ "bootfile=zImage\0" \ "usbtty=cdc_acm\0" \ "vram=16M\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "vram=${vram} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" \ @@ -106,10 +100,10 @@ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ + "run args_mmc; " \ "bootz ${loadaddr} - ${fdtaddr}\0" \ "uimageboot=echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ + "run args_mmc; " \ "bootm ${loadaddr}\0" \ "findfdt="\ "if test $board_name = sdp4430; then " \ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 1c1f8c0830..189ea7e914 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -70,6 +70,7 @@ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ + DEFAULT_MMC_TI_ARGS \ "console=" CONSOLEDEV ",115200n8\0" \ "fdtfile=undefined\0" \ "bootpart=0:2\0" \ @@ -80,14 +81,6 @@ "partitions=" PARTS_DEFAULT "\0" \ "optargs=\0" \ "dofastboot=0\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "vram=${vram} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" \ @@ -110,7 +103,7 @@ "if run loadimage; then " \ "run loadfdt; " \ "echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ + "run args_mmc; " \ "bootz ${loadaddr} - ${fdtaddr}; " \ "fi;" \ "fi;\0" \ diff --git a/include/configs/titanium.h b/include/configs/titanium.h index 1b4ca295bc..acfa84ab2c 100644 --- a/include/configs/titanium.h +++ b/include/configs/titanium.h @@ -33,6 +33,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/tk71.h b/include/configs/tk71.h deleted file mode 100644 index 46e8c90b45..0000000000 --- a/include/configs/tk71.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright (C) 2012 Marek Vasut <marex@denx.de> - * on behalf of DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_TK71_H__ -#define __CONFIG_TK71_H__ - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nKa-Ro TK71" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define MACH_TYPE_TK71 2399 -#define CONFIG_MACH_TYPE MACH_TYPE_TK71 - -/* - * Commands configuration - */ -#define CONFIG_SYS_HUSH_PARSER - -#define CONFIG_SYS_NO_FLASH -#define CONFIG_DOS_PARTITION -#define CONFIG_SUPPORT_VFAT - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* - * NAND flash - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_JFFS2_NAND -#define CONFIG_JFFS2_DEV "nand0,3" -#endif - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} -#define CONFIG_PHY_BASE_ADR 0x08 -#endif - -/* - * USB/EHCI - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_KIRKWOOD -#define CONFIG_EHCI_IS_TDI -#define CONFIG_USB_STORAGE -#endif - -/* - * Environment variables configurations - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SECT_SIZE 0x20000 -#else -#define CONFIG_ENV_IS_NOWHERE -#endif - -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_ADDR 0x80000 -#define CONFIG_ENV_OFFSET 0x80000 - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "nand read 0x800000 kernel 0x300000; bootm;" -#define CONFIG_MTDPARTS "512K(u-boot),512K(u-boot-env),3M(kernel),-(root)" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "update_uboot=dhcp u-boot.kwb; nand erase.part u-boot; nand write ${fileaddr} u-boot ${filesize}\0" \ - "update_kernel=dhcp uImage-tk71; nand erase.part kernel; nand write ${fileaddr} kernel ${filesize} \0" \ - "update_rootfs=dhcp rootfs-tk71; nand erase.part root; nand write ${fileaddr} root ${filesize}\0" \ - "update_all=run update_uboot; run update_kernel; run update_rootfs; reset\0" \ - "mtdids=nand0=orion_nand\0" \ - "mtdparts=mtdparts=orion_nand:"CONFIG_MTDPARTS"\0" \ - "bootargs=console=ttyS0,115200 mtdparts=orion_nand:"CONFIG_MTDPARTS" rootfstype=jffs2 root=/dev/mtdblock3 rw\0" -#define MTDIDS_DEFAULT "nand0=orion_nand" -#define MTDPARTS_DEFAULT "mtdparts=orion_nand:"CONFIG_MTDPARTS - -#define PHYS_SDRAM_1 0x00000000 /* Base address */ -#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */ - -#endif /* __CONFIG_TK71_H__ */ diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index f7fade12f1..295e16303c 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -62,6 +62,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h deleted file mode 100644 index 40c8d718d8..0000000000 --- a/include/configs/trizepsiv.h +++ /dev/null @@ -1,309 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefano Babic, DENX Gmbh, sbabic@denx.de - * - * (C) Copyright 2004 - * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * Configuation settings for the LUBBOCK board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_CPU_PXA27X 1 /* This is an PXA27x CPU */ - -#define CONFIG_MMC 1 -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_SYS_TEXT_BASE 0x0 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -#define RTC - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on Conxs */ -#define CONFIG_BTUART 1 /* we use BTUART on Conxs */ -#define CONFIG_STUART 1 /* we use STUART on Conxs */ -#define CONFIG_CONS_INDEX 3 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 38400 - -#define CONFIG_DOS_PARTITION 1 - -/* - * Command line configuration. - */ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ - -#undef CONFIG_SHOW_BOOT_PROGRESS - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_SERVERIP 192.168.1.99 -#define CONFIG_BOOTCOMMAND "run boot_flash" -#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\ - " rw root=/dev/ram initrd=0xa0800000,5m" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "program_boot_mmc=" \ - "mw.b 0xa0010000 0xff 0x20000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x1ffff; " \ - "erase 0x0 0x1ffff; " \ - "cp.b 0xa0010000 0x0 0x20000; " \ - "fi\0" \ - "program_uzImage_mmc=" \ - "mw.b 0xa0010000 0xff 0x180000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 uzImage; " \ - "then " \ - "protect off 0x40000 0x1bffff; " \ - "erase 0x40000 0x1bffff; " \ - "cp.b 0xa0010000 0x40000 0x180000; " \ - "fi\0" \ - "program_ramdisk_mmc=" \ - "mw.b 0xa0010000 0xff 0x500000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 ramdisk.gz; " \ - "then " \ - "protect off 0x1c0000 0x6bffff; " \ - "erase 0x1c0000 0x6bffff; " \ - "cp.b 0xa0010000 0x1c0000 0x500000; " \ - "fi\0" \ - "boot_mmc=" \ - "if mmcinit && " \ - "fatload mmc 0 0xa0030000 uzImage && " \ - "fatload mmc 0 0xa0800000 ramdisk.gz; " \ - "then " \ - "bootm 0xa0030000; " \ - "fi\0" \ - "boot_flash=" \ - "cp.b 0x1c0000 0xa0800000 0x500000; " \ - "bootm 0x40000\0" \ - -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -/* #define CONFIG_INITRD_TAG 1 */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ -#else -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */ - -#define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ - -#ifdef CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0x00018000 -#define CONFIG_SYS_GPSR1_VAL 0x00000000 -#define CONFIG_SYS_GPSR2_VAL 0x400dc000 -#define CONFIG_SYS_GPSR3_VAL 0x00000000 -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CONFIG_SYS_GPCR3_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0x00018000 -#define CONFIG_SYS_GPDR1_VAL 0x00028801 -#define CONFIG_SYS_GPDR2_VAL 0x520dc000 -#define CONFIG_SYS_GPDR3_VAL 0x0001E000 -#define CONFIG_SYS_GAFR0_L_VAL 0x801c0000 -#define CONFIG_SYS_GAFR0_U_VAL 0x00000013 -#define CONFIG_SYS_GAFR1_L_VAL 0x6990100A -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 -#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x010900F2 -#define CONFIG_SYS_GAFR3_L_VAL 0x54000003 -#define CONFIG_SYS_GAFR3_U_VAL 0x00002401 -#define CONFIG_SYS_GRER0_VAL 0x00000000 -#define CONFIG_SYS_GRER1_VAL 0x00000000 -#define CONFIG_SYS_GRER2_VAL 0x00000000 -#define CONFIG_SYS_GRER3_VAL 0x00000000 - -#define CONFIG_SYS_GFER1_VAL 0x00000000 -#define CONFIG_SYS_GFER3_VAL 0x00000020 - -#if CONFIG_POLARIS -#define CONFIG_SYS_GFER0_VAL 0x00000001 -#define CONFIG_SYS_GFER2_VAL 0x00200000 -#else -#define CONFIG_SYS_GFER0_VAL 0x00000000 -#define CONFIG_SYS_GFER2_VAL 0x00000000 -#endif - -#define CONFIG_SYS_PSSR_VAL 0x20 /* CHECK */ - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x01FFFFFF /* CHECK */ -#define CONFIG_SYS_CCCR 0x02000290 /* 520Mhz */ - -/* - * Memory settings - */ - -#define CONFIG_SYS_MSC0_VAL 0x4df84df0 -#define CONFIG_SYS_MSC1_VAL 0x7ff87ff4 -#if CONFIG_POLARIS -#define CONFIG_SYS_MSC2_VAL 0xa2697ff8 -#else -#define CONFIG_SYS_MSC2_VAL 0xa26936d4 -#endif -#define CONFIG_SYS_MDCNFG_VAL 0x880009C9 -#define CONFIG_SYS_MDREFR_VAL 0x20ca201e -#define CONFIG_SYS_MDMRS_VAL 0x00220022 - -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x00004204 -#define CONFIG_SYS_MCMEM1_VAL 0x00010204 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00008407 -#define CONFIG_SYS_MCIO1_VAL 0x0000c108 - -#define CONFIG_DRIVER_DM9000 1 - -#if CONFIG_POLARIS -#define CONFIG_DM9000_BASE 0x0C800000 -#else -#define CONFIG_DM9000_BASE 0x08000000 -#endif - -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE+0x8004) - -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_SYS_USB_OHCI_BOARD_INIT 1 -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "trizepsiv" -#define CONFIG_USB_STORAGE 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 - -/* - * FLASH and environment organization - */ - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_SYS_MONITOR_BASE 0 -#define CONFIG_SYS_MONITOR_LEN 0x40000 - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* write flash less slowly */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -/* Unlock to be used with Intel chips */ -#define CONFIG_SYS_FLASH_PROTECTION 1 - -/* Flash environment locations */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment */ -#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/tt01.h b/include/configs/tt01.h deleted file mode 100644 index ca1e2e25fb..0000000000 --- a/include/configs/tt01.h +++ /dev/null @@ -1,266 +0,0 @@ -/* - * (C) Copyright 2011 HALE electronic <helmut.raiger@hale.at> - * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com> - * - * Configuration settings for the HALE TT-01 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - -/* High Level Configuration Options */ -#define CONFIG_MX31 - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_MACH_TYPE 3726 /* not yet in mach-types.h */ -#define CONFIG_SYS_TEXT_BASE 0xA0000000 - - -/* - * Physical Memory Map: - * CS settings are defined by i.MX31: - * - CSD0 and CDS1 are 256MB each, starting at 0x80000000 and 0x9000000 - * - CS0 and CS1 are 128MB each, at A0000000 and A8000000 - * - CS2 to CS5 are 32MB each, at B0.., B2.., B4.., B6.. - * - * HALE set-up of the bluetechnix board for now is: - * - 128MB DDR (2x64MB, 2x16bit), connected to 32bit DDR ram interface - * - NOR-Flash (Spansion 32MB MCP, Flash+16MB PSRAM), 16bit interface at CS0 - * - S71WS256ND0BFWYM (and CS1 for 64MB S71WS512ND0 without PSRAM) - * the flash chip is a mirrorbit S29WS256N ! - * - the PSRAM is hooked to CS5 (0xB6000000) - * - Intel Strata Flash PF48F2000P0ZB00, 16bit interface at (CS0 or) CS1 - * - 64Mbit = 8MByte (will go away in the production set-up) - * - NAND-Flash NAND01GR3B2BZA6 at NAND-FC: - * 1Gbit=128MB, 2048+64 bytes/page, 64pages x 1024 blocks - * - Ethernet controller SMC9118 at CS4 via FPGA, 16bit interface - * - * u-boot will support the 32MB nor flash and the 128MB NAND flash, the PSRAM - * is not used right now. We should be able to reduce the SOM to NAND flash - * only and boot from there. - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) - -/* default load address, 1MB up the road */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1+0x100000) - -/* Size of malloc() pool, make sure possible frame buffer fits */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 10*1024*1024) - -/* memtest works on all but the last 1MB (u-boot) and malloc area */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END \ - (PHYS_SDRAM_1+(PHYS_SDRAM_1_SIZE-CONFIG_SYS_MALLOC_LEN-0x100000)) - -/* CFI FLASH driver setup */ -#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/cfi_flash.c */ -#define CONFIG_FLASH_SPANSION_S29WS_N -/* - * TODO: Bluetechnix (the supplier of the SOM) did define these values - * in their original version of u-boot (1.2 or so). This should be - * reviewed. - * - * #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - * #define CONFIG_SYS_FLASH_PROTECTION - */ -#define CONFIG_SYS_FLASH_BASE CS0_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (254+8) /* max number of sectors per chip */ - -/* - * FLASH and environment organization, only the Spansion chip is supported: - * - it has 254 * 128kB + 8 * 32kB blocks - * - this setup uses 4*32k+3*128k as monitor space = 0xA000 0000 to 0xA00F FFFF - * and 2 sectors with 128k as environment = - * A010 0000 to 0xA011 FFFF and 0xA012 0000 to 0xA013 FFFF - * - this could be less, but this is only for developer versions of the board - * and no-one is going to use the NOR flash anyway. - * - * Monitor is at the beginning of the NOR-Flash, 1MB reserved. Again this is - * way to large, but it avoids ENV overwrite (when updating u-boot) in case - * size breaks the next boundary (as it has with 128k). - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (1024 * 1024) - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (128 * 1024) - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - -/* Hardware drivers */ - -/* - * on TT-01 UART1 pins are used by Audio, so we use UART2 - * TT-01 implements a hardware that turns off components depending on - * the power level. In PL=1 the RS232 transceiver is usually off, - * make sure that the transceiver is enabled during PL=1 for testing! - */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART2_BASE - -#define CONFIG_MXC_SPI -#define CONFIG_MXC_GPIO - -/* MC13783 connected to CSPI3 and SS0 */ -#define CONFIG_POWER -#define CONFIG_POWER_SPI -#define CONFIG_POWER_FSL - -#define CONFIG_FSL_PMIC_BUS 2 -#define CONFIG_FSL_PMIC_CS 0 -#define CONFIG_FSL_PMIC_CLK 1000000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_FSL_PMIC_BITLEN 32 - -#define CONFIG_RTC_MC13XXX - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -/* console is UART2 on TT-01 */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* ethernet setup for the onboard smc9118 */ -#define CONFIG_MII -#define CONFIG_SMC911X -/* 16 bit, onboard ethernet, decoded via MACH-MX0 FPGA at 0x84200000 */ -#define CONFIG_SMC911X_BASE (CS4_BASE+0x200000) -#define CONFIG_SMC911X_16_BIT - -/* mmc driver */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_MXC_MMC -#define CONFIG_MXC_MCI_REGS_BASE SDHC1_BASE_ADDR - -/* video support */ -#define CONFIG_VIDEO -#define CONFIG_VIDEO_MX3 -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -/* splash image won't work with NAND boot, use preboot script */ -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_CONSOLE_EXTRA_INFO /* display additional board info */ -#define CONFIG_VGA_AS_SINGLE_DEVICE /* display is an output only device */ - -/* allow stdin, stdout and stderr variables to redirect output */ -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SILENT_CONSOLE /* UARTs used externally (release) */ -#define CONFIG_SYS_DEVICE_NULLDEV /* allow console to be turned off */ -#define CONFIG_PREBOOT - -/* allow decompressing max. 4MB */ -#define CONFIG_VIDEO_BMP_GZIP -/* this is not only used by cfb_console.c for the logo, but also in cmd_bmp.c */ -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (4*1024*1024) - -/* - * Command definition - */ -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NAND -/* - * #define CONFIG_CMD_NAND_LOCK_UNLOCK the NAND01... chip does not support - * the NAND_CMD_LOCK_STATUS command, however the NFC of i.MX31 supports - * a software locking scheme. - */ -#define CONFIG_CMD_BMP - -#define CONFIG_BOOTDELAY 3 - -/* - * currently a default setting for booting via script is implemented - * set user to login name and serverip to tftp host, define your - * boot behaviour in bootscript.loginname - * - * TT-01 board specific TFT setup (used by drivers/video/mx3fb.c) - * - * This set-up is for the L5F30947T04 by Epson, which is - * 800x480, 33MHz pixel clock, 60Hz vsync, 31.6kHz hsync - * sync must be set to: DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ -"videomode=epson\0" \ -"epson=video=ctfb:x:800,y:480,depth:16,mode:0,pclk:30076," \ - "le:215,ri:1,up:32,lo:13,hs:7,vs:10,sync:100663296,vmode:0\0" \ -"bootcmd=dhcp bootscript.${user}; source\0" - -#define CONFIG_BOOTP_SERVERIP /* tftp serverip not overruled by dhcp server */ -#define CONFIG_BOOTP_SEND_HOSTNAME /* if env-var 'hostname' is set, send it */ - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_HUSH_PARSER - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT)+16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_CMDLINE_EDITING - -/* MMC boot support */ -#define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - -#define CONFIG_NAND_MXC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* - * actually this is nothing someone wants to configure! - * CONFIG_SYS_NAND_BASE despite being passed to board_nand_init() - * is not used by the driver. - */ -#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR -#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR -#define CONFIG_MXC_NAND_HWECC - -/* the current u-boot driver does not use the nand flash setup! */ -#define CONFIG_SYS_NAND_LARGEPAGE -/* - * it's not 16 bit: - * #define CONFIG_SYS_NAND_BUSWIDTH_16BIT - * the current u-boot mxc_nand.c tries to auto-detect, but this only - * reads the boot settings during reset (which might be wrong) - */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/tx25.h b/include/configs/tx25.h deleted file mode 100644 index 834b6169f6..0000000000 --- a/include/configs/tx25.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * (C) Copyright 2009 DENX Software Engineering - * Author: John Rigby <jrigby@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - -/* - * KARO TX25 board - SoC Configuration - */ -#define CONFIG_MX25 -#define CONFIG_MX25_CLK32 32000 /* OSC32K frequency */ -#define CONFIG_SYS_TIMER_RATE CONFIG_MX25_CLK32 -#define CONFIG_SYS_TIMER_COUNTER \ - (&((struct gpt_regs *)IMX_GPT1_BASE)->counter) - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */ - -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_MAX_SIZE 2048 -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT - -#define CONFIG_SPL_TEXT_BASE 0x810c0000 -#define CONFIG_SYS_TEXT_BASE 0x81200000 - -#ifndef MACH_TYPE_TX25 -#define MACH_TYPE_TX25 2177 -#endif - -#define CONFIG_MACH_TYPE MACH_TYPE_TX25 - -#ifdef CONFIG_SPL_BUILD -/* Start copying real U-boot from the second page */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000 - -#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST - -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_SIZE (128 * 1024 * 1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -#else -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* - * Memory Info - */ -/* malloc() len */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -/* - * Board has 2 32MB banks of DRAM but there is a bug when using - * both so only the first is configured - */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE 0x02000000 -#if (CONFIG_NR_DRAM_BANKS == 2) -#define PHYS_SDRAM_2 0x90000000 -#define PHYS_SDRAM_2_SIZE 0x02000000 -#endif -/* 8MB DRAM test */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1+0x0800000) - -/* - * Serial Info - */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ - -#define CONFIG_MXC_GPIO - -/* - * Flash & Environment - */ -/* No NOR flash present */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN -#define CONFIG_ENV_SIZE (128 * 1024) /* 128 kB NAND block size */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) - -/* NAND */ -#define CONFIG_NAND_MXC -#define CONFIG_MXC_NAND_REGS_BASE (0xBB000000) -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE (0xBB000000) -#define CONFIG_JFFS2_NAND -#define CONFIG_MXC_NAND_HWECC -#define CONFIG_SYS_NAND_LARGEPAGE - -/* U-Boot general configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -/* Print buffer sz */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP - -/* U-Boot commands */ -#define CONFIG_CMD_NAND -#define CONFIG_CMD_CACHE - -/* - * Ethernet - */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_PHYADDR 0x1f -#define CONFIG_MII -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_LOADADDR 0x81000000 /* loadaddr env var */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttymxc0,${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addmisc=setenv bootargs ${bootargs}\0" \ - "u-boot=tx25/u-boot.bin\0" \ - "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ - "hostname=tx25\0" \ - "bootfile=tx25/uImage\0" \ - "rootpath=/opt/eldk/arm\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm\0" \ - "bootcmd=run net_nfs\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "update=nand erase 0 40000;nand write ${loadaddr} 0 40000\0" \ - "upd=run load update\0" \ - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (IMX_RAM_BASE + IMX_RAM_SIZE) - -#endif /* __CONFIG_H */ diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h deleted file mode 100644 index a8cc0306cb..0000000000 --- a/include/configs/u8500_href.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_U8500 - -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - -/* - * Size of malloc() pool - */ -#ifdef CONFIG_BOOT_SRAM -#define CONFIG_ENV_SIZE (32*1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64*1024) -#else -#define CONFIG_ENV_SIZE (128*1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#endif - -/* - * PL011 Configuration - */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_SERIAL_RLCR -#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT - -/* - * U8500 UART registers base for 3 serial devices - */ -#define CFG_UART0_BASE 0x80120000 -#define CFG_UART1_BASE 0x80121000 -#define CFG_UART2_BASE 0x80007000 -#define CFG_SERIAL0 CFG_UART0_BASE -#define CFG_SERIAL1 CFG_UART1_BASE -#define CFG_SERIAL2 CFG_UART2_BASE -#define CONFIG_PL011_CLOCK 38400000 -#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \ - (void *)CFG_SERIAL2 } -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Devices and file systems - */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION - -/* - * Commands - */ -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_I2C - -#ifndef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 1 -#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND "run emmcboot" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=0x00100000\0" \ - "console=ttyAMA2,115200n8\0" \ - "memargs256=mem=96M@0 mem_modem=32M@96M mem=30M@128M " \ - "pmem=22M@158M pmem_hwb=44M@180M mem_mali=32@224M\0" \ - "memargs512=mem=96M@0 mem_modem=32M@96M mem=44M@128M " \ - "pmem=22M@172M mem=30M@194M mem_mali=32M@224M " \ - "pmem_hwb=54M@256M mem=202M@310M\0" \ - "commonargs=setenv bootargs cachepolicy=writealloc noinitrd " \ - "init=init " \ - "board_id=${board_id} " \ - "logo.${logo} " \ - "startup_graphics=${startup_graphics}\0" \ - "emmcargs=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk0p2 " \ - "rootdelay=1\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console}\0" \ - "emmcboot=echo Booting from eMMC ...; " \ - "run commonargs emmcargs addcons memargs;" \ - "mmc read 0 ${loadaddr} 0xA0000 0x4000;" \ - "bootm ${loadaddr}\0" \ - "flash=mmc init 1;fatload mmc 1 ${loadaddr} flash.scr;" \ - "source ${loadaddr}\0" \ - "loaduimage=mmc init 1;fatload mmc 1 ${loadaddr} uImage\0" \ - "usbtty=cdc_acm\0" \ - "stdout=serial,usbtty\0" \ - "stdin=serial,usbtty\0" \ - "stderr=serial,usbtty\0" - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SETUP_MEMORY_TAGS 2 -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ - -/* - * I2C - */ -#define CONFIG_U8500_I2C -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0 /* slave addr of controller */ -#define CONFIG_SYS_U8500_I2C0_BASE 0x80004000 -#define CONFIG_SYS_U8500_I2C1_BASE 0x80122000 -#define CONFIG_SYS_U8500_I2C2_BASE 0x80128000 -#define CONFIG_SYS_U8500_I2C3_BASE 0x80110000 -#define CONFIG_SYS_U8500_I2C_BUS_MAX 4 - -#define CONFIG_SYS_I2C_GPIOE_ADDR 0x42 /* GPIO expander chip addr */ -#define CONFIG_TC35892_GPIO - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ -#define PHYS_SDRAM_SIZE_1 0x20000000 /* 512 MB */ - -/* - * additions for new relocation code - */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET - -/* landing address before relocation */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x0 -#endif - -/* - * MMC related configs - * NB Only externa SD slot is currently supported - */ -#define MMC_BLOCK_SIZE 512 -#define CONFIG_ARM_PL180_MMCI -#define CONFIG_ARM_PL180_MMCI_BASE 0x80126000 /* MMC base for 8500 */ -#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000 -#define CONFIG_MMC_DEV_NUM 1 - -#define CONFIG_CMD_ENV -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x13F80000 -#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_NO_FLASH - -/* - * base register values for U8500 - */ -#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock - management unit */ -#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index d59564bafd..9109b7f8d9 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -9,73 +9,9 @@ #ifndef __CONFIG_UNIPHIER_COMMON_H__ #define __CONFIG_UNIPHIER_COMMON_H__ -#if defined(CONFIG_MACH_PH1_SLD3) -#define CONFIG_DDR_NUM_CH0 2 -#define CONFIG_DDR_NUM_CH1 1 -#define CONFIG_DDR_NUM_CH2 1 - -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x20000000 -#define CONFIG_SDRAM1_BASE 0xc0000000 -#define CONFIG_SDRAM1_SIZE 0x20000000 -#define CONFIG_SDRAM2_BASE 0xc0000000 -#define CONFIG_SDRAM2_SIZE 0x10000000 -#endif - -#if defined(CONFIG_MACH_PH1_LD4) -#define CONFIG_DDR_NUM_CH0 1 -#define CONFIG_DDR_NUM_CH1 1 - -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x10000000 -#define CONFIG_SDRAM1_BASE 0x90000000 -#define CONFIG_SDRAM1_SIZE 0x10000000 -#endif - -#if defined(CONFIG_MACH_PH1_PRO4) -#define CONFIG_DDR_NUM_CH0 2 -#define CONFIG_DDR_NUM_CH1 2 - -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x20000000 -#define CONFIG_SDRAM1_BASE 0xa0000000 -#define CONFIG_SDRAM1_SIZE 0x20000000 -#endif - -#if defined(CONFIG_MACH_PH1_SLD8) -#define CONFIG_DDR_NUM_CH0 1 -#define CONFIG_DDR_NUM_CH1 1 - -/* Physical start address of SDRAM */ -#define CONFIG_SDRAM0_BASE 0x80000000 -#define CONFIG_SDRAM0_SIZE 0x10000000 -#define CONFIG_SDRAM1_BASE 0x90000000 -#define CONFIG_SDRAM1_SIZE 0x10000000 -#endif - #define CONFIG_I2C_EEPROM #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 -/* - * Support card address map - */ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) -# define CONFIG_SUPPORT_CARD_BASE 0x03f00000 -# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) -# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000) -# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000) -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# define CONFIG_SUPPORT_CARD_BASE 0x08000000 -# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) -# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00401630) -# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00200000) -#endif - #ifdef CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_COM1 CONFIG_SUPPORT_CARD_UART_BASE @@ -90,7 +26,8 @@ #define CONFIG_SMC911X -#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE +/* dummy: referenced by examples/standalone/smc911x_eeprom.c */ +#define CONFIG_SMC911X_BASE 0 #define CONFIG_SMC911X_32_BIT /*----------------------------------------------------------------------- @@ -140,7 +77,7 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2 +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 /* serial console configuration */ #define CONFIG_BAUDRATE 115200 @@ -191,7 +128,7 @@ #define CONFIG_NAND_DENALI_ECC_SIZE 1024 -#ifdef CONFIG_MACH_PH1_SLD3 +#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD3 #define CONFIG_SYS_NAND_REGS_BASE 0xf8100000 #define CONFIG_SYS_NAND_DATA_BASE 0xf8000000 #else @@ -240,21 +177,17 @@ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ "tftpboot; bootm;" -#define CONFIG_BOOTARGS " earlyprintk loglevel=8" - #ifdef CONFIG_FIT #define CONFIG_BOOTFILE "fitImage" #define LINUXBOOT_ENV_SETTINGS \ "fit_addr=0x00100000\0" \ "fit_addr_r=0x84100000\0" \ "fit_size=0x00f00000\0" \ - "norboot=run add_default_bootargs &&" \ + "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \ "bootm $fit_addr\0" \ - "nandboot=run add_default_bootargs &&" \ - "nand read $fit_addr_r $fit_addr $fit_size &&" \ + "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \ "bootm $fit_addr_r\0" \ - "tftpboot=run add_default_bootargs &&" \ - "tftpboot $fit_addr_r $bootfile &&" \ + "tftpboot=tftpboot $fit_addr_r $bootfile &&" \ "bootm $fit_addr_r\0" #else #define CONFIG_BOOTFILE "uImage" @@ -270,15 +203,15 @@ "ramdisk_addr_r=0x84a00000\0" \ "ramdisk_size=0x00600000\0" \ "ramdisk_file=rootfs.cpio.uboot\0" \ - "norboot=run add_default_bootargs &&" \ + "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \ + "setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \ + "setexpr fdt_addr $nor_base + $fdt_addr &&" \ "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \ - "nandboot=run add_default_bootargs &&" \ - "nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ + "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \ "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \ "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ - "tftpboot=run add_default_bootargs &&" \ - "tftpboot $kernel_addr_r $bootfile &&" \ + "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \ "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ "tftpboot $fdt_addr_r $fdt_file &&" \ "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" @@ -287,35 +220,25 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "verify=n\0" \ + "norbase=0x42000000\0" \ "nandupdate=nand erase 0 0x00100000 &&" \ "tftpboot u-boot-spl-dtb.bin &&" \ "nand write $loadaddr 0 0x00010000 &&" \ "tftpboot u-boot-dtb.img &&" \ "nand write $loadaddr 0x00010000 0x000f0000\0" \ - "add_default_bootargs=setenv bootargs $bootargs" \ - " console=ttyS0,$baudrate\0" \ LINUXBOOT_ENV_SETTINGS /* Open Firmware flat tree */ #define CONFIG_OF_LIBFDT -/* Memory Size & Mapping */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SDRAM0_BASE - -#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE >= CONFIG_SDRAM1_BASE -/* Thre is no memory hole */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE + CONFIG_SDRAM1_SIZE) -#else +#define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE) -#endif -#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \ - defined(CONFIG_MACH_PH1_SLD8) +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) #define CONFIG_SPL_TEXT_BASE 0x00040000 -#endif -#if defined(CONFIG_MACH_PH1_PRO4) +#else #define CONFIG_SPL_TEXT_BASE 0x00100000 #endif diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index 4a7702cd09..714e3e2ca2 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -67,6 +67,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ /* Fuse */ #define CONFIG_CMD_FUSE diff --git a/include/configs/versatile.h b/include/configs/versatile.h deleted file mode 100644 index 636ca436d9..0000000000 --- a/include/configs/versatile.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - * (C) Copyright 2003 - * Texas Instruments. - * Kshitij Gupta <kshitij@ti.com> - * Configuation settings for the TI OMAP Innovator board. - * - * (C) Copyright 2004 - * ARM Ltd. - * Philippe Robin, <philippe.robin@arm.com> - * Configuration for Versatile PB. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_VERSATILE 1 /* This is Versatile Platform Board */ -#define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */ - -#define CONFIG_SYS_MEMTEST_START 0x100000 -#define CONFIG_SYS_MEMTEST_END 0x10000000 - -#define CONFIG_SYS_TIMERBASE 0x101E2000 /* Timer 0 and 1 base */ -#define CONFIG_SYS_TIMER_RATE (1000000 / 256) -#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) -#define CONFIG_SYS_TIMER_COUNTS_DOWN - -/* - * control registers - */ -#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ - -/* - * System controller bit assignment - */ -#define VERSATILE_REFCLK 0 -#define VERSATILE_TIMCLK 1 - -#define VERSATILE_TIMER1_EnSel 15 -#define VERSATILE_TIMER2_EnSel 17 -#define VERSATILE_TIMER3_EnSel 19 -#define VERSATILE_TIMER4_EnSel 21 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_MISC_INIT_R 1 -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE 8192 -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) - -/* - * Hardware drivers - */ - -#define CONFIG_SMC91111 -#define CONFIG_SMC_USE_32_BIT -#define CONFIG_SMC91111_BASE 0x10010000 -#undef CONFIG_SMC91111_EXT_PHY - -/* - * NS16550 Configuration - */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_CLOCK 24000000 -#define CONFIG_PL01x_PORTS \ - {(void *)CONFIG_SYS_SERIAL0, \ - (void *)CONFIG_SYS_SERIAL1 } -#define CONFIG_CONS_INDEX 0 - -#define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_SERIAL0 0x101F1000 -#define CONFIG_SYS_SERIAL1 0x101F2000 - -/* - * Command line configuration. - */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_SUBNETMASK - -#define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp "\ - "netdev=25,0,0xf1010000,0xf1010010,eth0 "\ - "console=ttyAMA0,38400n1" - -/* - * Static configuration when assigning fixed address - */ -#define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Monitor Command Prompt */ -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_ARCH_VERSATILE_AB -# define CONFIG_SYS_PROMPT "VersatileAB # " -#else -# define CONFIG_SYS_PROMPT "VersatilePB # " -#endif -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x00800000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_GBL_DATA_OFFSET) - -#define CONFIG_BOARD_EARLY_INIT_F - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#ifdef CONFIG_ARCH_VERSATILE_QEMU -#define CONFIG_SYS_TEXT_BASE 0x10000 -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_MONITOR_LEN 0x80000 -#else -#define CONFIG_SYS_TEXT_BASE 0x01000000 -/* - * Use the CFI flash driver for ease of use - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_ENV_IS_IN_FLASH 1 -/* - * System control register - */ -#define VERSATILE_SYS_BASE 0x10000000 -#define VERSATILE_SYS_FLASH_OFFSET 0x4C -#define VERSATILE_FLASHCTRL \ - (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET) -/* Enable writing to flash */ -#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */ - -/* - * Note that CONFIG_SYS_MAX_FLASH_SECT allows for a parameter block - * i.e. - * the bottom "sector" (bottom boot), or top "sector" - * (top boot), is a seperate erase region divided into - * 4 (equal) smaller sectors. This, notionally, allows - * quicker erase/rewrire of the most frequently changed - * area...... - * CONFIG_SYS_MAX_FLASH_SECT is padded up to a multiple of 4 - */ - -#ifdef CONFIG_ARCH_VERSATILE_AB -#define FLASH_SECTOR_SIZE 0x00020000 /* 128 KB sectors */ -#define CONFIG_ENV_SECT_SIZE (2 * FLASH_SECTOR_SIZE) -#define CONFIG_SYS_MAX_FLASH_SECT (520) -#endif - -#ifdef CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */ -#define FLASH_SECTOR_SIZE 0x00040000 /* 256 KB sectors */ -#define CONFIG_ENV_SECT_SIZE FLASH_SECTOR_SIZE -#define CONFIG_SYS_MAX_FLASH_SECT (260) -#endif - -#define CONFIG_SYS_FLASH_BASE 0x34000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -#define CONFIG_SYS_MONITOR_LEN (4 * CONFIG_ENV_SECT_SIZE) - -/* The ARM Boot Monitor is shipped in the lowest sector of flash */ - -#define FLASH_TOP (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE) -#define CONFIG_ENV_ADDR (FLASH_TOP - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_ENV_ADDR - CONFIG_SYS_MONITOR_LEN) - -#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */ -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 6107c64dd2..ef3014d68b 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -30,7 +30,8 @@ #define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a" /* Link Definitions */ -#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP +#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \ + defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM) /* ATF loads u-boot here for BASE_FVP model */ #define CONFIG_SYS_TEXT_BASE 0x88000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) @@ -41,6 +42,8 @@ #error "Unknown board variant" #endif +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT @@ -101,7 +104,8 @@ #define GICR_BASE (0x2f100000) #else -#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP +#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \ + defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM) #define GICD_BASE (0x2f000000) #define GICC_BASE (0x2c000000) #elif CONFIG_TARGET_VEXPRESS64_JUNO @@ -183,25 +187,46 @@ * be copied into DRAM */ #define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_name=Image\0" \ + "kernel_name=norkern\0" \ + "kernel_alt_name=Image\0" \ "kernel_addr=0x80000000\0" \ - "fdt_name=juno\0" \ + "initrd_name=ramdisk.img\0" \ + "initrd_addr=0x84000000\0" \ + "fdt_name=board.dtb\0" \ + "fdt_alt_name=juno\0" \ "fdt_addr=0x83000000\0" \ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ /* Assume we boot with root on the first partition of a USB stick */ #define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " \ - "root=/dev/sda1 rw " \ + "root=/dev/sda2 rw " \ "rootwait "\ - "earlyprintk=pl011,0x7ff80000 debug user_debug=31 "\ + "earlyprintk=pl011,0x7ff80000 debug "\ + "user_debug=31 "\ + "androidboot.hardware=juno "\ "loglevel=9" /* Copy the kernel and FDT to DRAM memory and boot */ #define CONFIG_BOOTCOMMAND "afs load ${kernel_name} ${kernel_addr} ; " \ + "if test $? -eq 1; then "\ + " echo Loading ${kernel_alt_name} instead of "\ + "${kernel_name}; "\ + " afs load ${kernel_alt_name} ${kernel_addr};"\ + "fi ; "\ "afs load ${fdt_name} ${fdt_addr} ; " \ + "if test $? -eq 1; then "\ + " echo Loading ${fdt_alt_name} instead of "\ + "${fdt_name}; "\ + " afs load ${fdt_alt_name} ${fdt_addr}; "\ + "fi ; "\ "fdt addr ${fdt_addr}; fdt resize; " \ - "booti ${kernel_addr} - ${fdt_addr}" + "if afs load ${initrd_name} ${initrd_addr} ; "\ + "then "\ + " setenv initrd_param ${initrd_addr}; "\ + " else setenv initrd_param -; "\ + "fi ; " \ + "booti ${kernel_addr} ${initrd_param} ${fdt_addr}" #define CONFIG_BOOTDELAY 1 @@ -222,13 +247,33 @@ #define CONFIG_BOOTCOMMAND "smhload ${kernel_name} ${kernel_addr}; " \ "smhload ${fdt_name} ${fdt_addr}; " \ - "smhload ${initrd_name} ${initrd_addr} initrd_end; " \ + "smhload ${initrd_name} ${initrd_addr} "\ + "initrd_end; " \ "fdt addr ${fdt_addr}; fdt resize; " \ "fdt chosen ${initrd_addr} ${initrd_end}; " \ "booti $kernel_addr - $fdt_addr" #define CONFIG_BOOTDELAY 1 +#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_addr=0x80080000\0" \ + "initrd_addr=0x84000000\0" \ + "fdt_addr=0x83000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" + +#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\ + "0x1c090000 debug user_debug=31 "\ + "androidboot.hardware=fvpbase "\ + "root=/dev/vda2 rw "\ + "rootwait "\ + "loglevel=9" + +#define CONFIG_BOOTCOMMAND "booti $kernel_addr $initrd_addr $fdt_addr" + +#define CONFIG_BOOTDELAY 1 + #else #error "Unknown board variant" #endif diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index c5131af340..324ba8f0cc 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -110,6 +110,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_SPD_BUS_NUM 0 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/vision2.h b/include/configs/vision2.h deleted file mode 100644 index b43373f134..0000000000 --- a/include/configs/vision2.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> - * - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * Configuration settings for the MX51-3Stack Freescale board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - - -#define CONFIG_MX51 /* in a mx51 */ -#define CONFIG_SYS_TEXT_BASE 0x97800000 - -#include <asm/arch/imx-regs.h> - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_BOARD_LATE_INIT - -#ifndef MACH_TYPE_TTC_VISION2 -#define MACH_TYPE_TTC_VISION2 2775 -#endif -#define CONFIG_MACH_TYPE MACH_TYPE_TTC_VISION2 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) - -/* - * Hardware drivers - */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART3_BASE -#define CONFIG_MXC_GPIO -#define CONFIG_MXC_SPI -#define CONFIG_HW_WATCHDOG - - /* - * SPI Configs - * */ -#define CONFIG_FSL_SF -#define CONFIG_CMD_SF - -#define CONFIG_SPI_FLASH_STMICRO - -/* - * Use gpio 4 pin 25 as chip select for SPI flash - * This corresponds to gpio 121 - */ -#define CONFIG_SF_DEFAULT_CS 1 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -#define CONFIG_SF_DEFAULT_SPEED 25000000 - -#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_MAX_HZ 25000000 -#define CONFIG_ENV_SPI_MODE SPI_MODE_0 - -#define CONFIG_ENV_OFFSET (6 * 64 * 1024) -#define CONFIG_ENV_SECT_SIZE (1 * 64 * 1024) -#define CONFIG_ENV_SIZE (4 * 1024) - -#define CONFIG_FSL_ENV_IN_SF -#define CONFIG_ENV_IS_IN_SPI_FLASH - -/* PMIC Controller */ -#define CONFIG_POWER -#define CONFIG_POWER_SPI -#define CONFIG_POWER_FSL -#define CONFIG_FSL_PMIC_BUS 0 -#define CONFIG_FSL_PMIC_CS 0 -#define CONFIG_FSL_PMIC_CLK 2500000 -#define CONFIG_FSL_PMIC_MODE SPI_MODE_0 -#define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13XXX - -/* - * MMC Configs - */ -#define CONFIG_FSL_ESDHC -#ifdef CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR (0x70004000) -#define CONFIG_SYS_FSL_ESDHC_NUM 1 - -#define CONFIG_MMC - -#define CONFIG_CMD_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -#define CONFIG_CMD_DATE - -/* - * Eth Configs - */ -#define CONFIG_HAS_ETH1 -#define CONFIG_MII - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1F - -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 3 -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ - -#define CONFIG_CMD_SPI - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "loadaddr=0x90800000\0" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 64 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x90000000 -#define CONFIG_SYS_MEMTEST_END 0x10000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024) -#define PHYS_SDRAM_2 CSD1_BASE_ADDR -#define PHYS_SDRAM_2_SIZE (256 * 1024 * 1024) -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#define CONFIG_BOARD_EARLY_INIT_F - -/* 166 MHz DDR RAM */ -#define CONFIG_SYS_DDR_CLKSEL 0 -#define CONFIG_SYS_CLKTL_CBCDR 0x19239100 -#define CONFIG_SYS_MAIN_PWR_ON - -#define CONFIG_SYS_NO_FLASH - -/* - * Framebuffer and LCD - */ -#define CONFIG_PREBOOT -#define CONFIG_VIDEO -#define CONFIG_VIDEO_IPUV3 -#define CONFIG_CFB_CONSOLE -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SPLASH_SCREEN -#define CONFIG_CMD_BMP -#define CONFIG_BMP_16BPP -#define CONFIG_IPUV3_CLK 133000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h deleted file mode 100644 index 3facd7f257..0000000000 --- a/include/configs/vl_ma2sc.h +++ /dev/null @@ -1,429 +0,0 @@ -/* - * (C) Copyright 2009-2012 - * Jens Scharsig <esw@bus-elekronik.de> - * BuS Elektronik GmbH & Co. KG - * - * Configuation settings for the VL_MA2SC board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*--------------------------------------------------------------------------*/ - -#define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/ -#define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */ -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_MISC_INIT_R - -#include <asm/hardware.h> - -#define MACH_TYPE_VL_MA2SC 2412 -#define CONFIG_MACH_TYPE MACH_TYPE_VL_MA2SC - -#define CONFIG_SYS_DCACHE_OFF - -#ifdef CONFIG_RAMLOAD -#define CONFIG_SYS_TEXT_BASE 0x21000000 -#else -#define CONFIG_SYS_TEXT_BASE 0x00000000 -#endif -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_IDENT_STRING " on MiS Activ 2" -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AT91_GPIO - -#if !defined(CONFIG_SYS_USE_NANDFLASH) && !defined(CONFIG_RAMLOAD) -#define CONFIG_SYS_USE_NORFLASH -#define CONFIG_SYS_USE_BOOT_NORFLASH -#endif - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#ifndef CONFIG_SYS_USE_BOOT_NORFLASH -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -/* - * Hardware drivers - */ - -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_WATCHDOG - -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS - -/* LCD */ -#define CONFIG_LCD -#define CONFIG_ATMEL_LCD -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SYS_BLACK_ON_WHITE -#define LCD_BPP LCD_COLOR8 -#define CONFIG_ATMEL_LCD_BGR555 - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_BMP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NAND -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_MD5SUM -#define CONFIG_CMD_SHA1SUM -/* -#define CONFIG_CMD_SPI -*/ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_USB - -#define CONFIG_SYS_LONGHELP -#define CONFIG_MD5 -#define CONFIG_SHA1 - -/*---------------------------------------------------------------------------- - * Hardware confuguration - *---------------------------------------------------------------------------*/ - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* UHP_BASE */ -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE -#define CONFIG_AT91C_PQFP_UHPBUG - -/* I2C-Bus */ - -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* not used */ - -#ifndef CONFIG_HARD_I2C -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED -#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE - -/* Software I2C driver configuration */ -#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED) - -#define AT91_PIN_SDA (1<<4) /* AT91C_PIO_PB4 */ -#define AT91_PIN_SCL (1<<5) /* AT91C_PIO_PB5 */ - -#define I2C_INIT i2c_init_board(); -#define I2C_ACTIVE writel(AT91_PIN_SDA, &pio->piob.mddr); -#define I2C_TRISTATE writel(AT91_PIN_SDA, &pio->piob.mder); -#define I2C_READ ((readl(&pio->piob.pdsr) & AT91_PIN_SDA) != 0) -#define I2C_SDA(bit) \ - do { \ - if (bit) \ - writel(AT91_PIN_SDA, &pio->piob.sodr); \ - else \ - writel(AT91_PIN_SDA, &pio->piob.codr); \ - } while (0); -#define I2C_SCL(bit) \ - do { \ - if (bit) \ - writel(AT91_PIN_SCL, &pio->piob.sodr); \ - else \ - writel(AT91_PIN_SCL, &pio->piob.codr); \ - } while (0); -#endif - -/* I2C-RTC */ - -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_DS1338 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#endif - -/* EEPROM */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 - -/* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 -#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 - -/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ -#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \ - (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ - AT91_MATRIX_CSA_EBI_CS1A) - -/* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ - (AT91_RSTC_KEY | \ - AT91_RSTC_MR_URSTEN | \ - AT91_RSTC_MR_ERSTL(15)) - -/* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ - AT91_WDT_MR_WDV(0xFFF) | \ - AT91_WDT_MR_WDDIS | \ - AT91_WDT_MR_WDD(0xFFF)) - -/* clocks */ - -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define MHZ180 -#if defined(MHZ199) -/* 199,8994 MHZ */ -#define MASTER_PLL_MUL 911 -#define MASTER_PLL_DIV 56 -#define MASTER_PLL_OUT 2 -#elif defined(MHZ180) -/* 180 MHZ */ -#define MASTER_PLL_MUL 1875 -#define MASTER_PLL_DIV 128 -#define MASTER_PLL_OUT 2 -#elif defined(MHZTEST) -/* Test MHZ */ -#define CONFIG_DISPLAY_CPUINFO -#define MASTER_PLL_MUL 8 -#define MASTER_PLL_DIV 1 -#define MASTER_PLL_OUT 2 -#else -/* 176.9472 MHZ */ -#define MASTER_PLL_MUL 72 -#define MASTER_PLL_DIV 5 -#define MASTER_PLL_OUT 2 -#endif - -#define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255)) - -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLAR_29 | \ - AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \ - AT91_PMC_PLLXR_PLLCOUNT(63) | \ - AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \ - AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV)) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \ - AT91_PMC_MCKR_MDIV_2) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \ - AT91_PMC_MCKR_MDIV_2) - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ -#define CONFIG_SYS_INIT_SP_ADDR 0x00504000 /* use internal SRAM0 */ - -#define CONFIG_SYS_SDRC_MR_VAL1 0 -#define CONFIG_SYS_SDRC_TR_VAL1 700 -#define CONFIG_SYS_SDRC_CR_VAL \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_3 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* Write Recovery Delay */ \ - (7 << 12) | /* Row Cycle Delay */ \ - (2 << 16) | /* Row Precharge Delay */ \ - (2 << 20) | /* Row to Column Delay */ \ - (5 << 24) | /* Active to Precharge Delay */ \ - (8 << 28)) /* Exit Self Refresh to Active Delay */ - -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE -#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH -#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR -#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL -#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ -#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ - -/* NOR flash */ - -#define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000) - -/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ -#define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ - AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ - AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) -#define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) -#define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ - AT91_SMC_MODE_DBW_16 | \ - AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6)) - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* our CLE is AD22 */ -#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15) -#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PB(0) -#endif - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 5 -#define CONFIG_AT91_WANTS_COMMON_PHY - -#define CONFIG_OVERWRITE_ETHADDR_ONCE - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x21e00000 - -/* Address and size of Primary Environment Sector */ -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 0x20000 -#else -#define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {312500, 230400, 115200, 19200, \ - 38400, 57600, 9600 } - -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) - -#ifndef CONFIG_RAMLOAD -#define CONFIG_BOOTCOMMAND "run nfsboot" -#endif -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_BOOT_RETRY_MIN 15 - -#define CONFIG_NFSBOOTCOMMAND \ - "dhcp $(copy_addr) $(kernelname);" \ - "run bootargsdefaults;" \ - "set bootargs $(bootargs) boot=nfs " \ - ";echo $(bootargs)" \ - ";bootm" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ubootaddr=10000000\0" \ - "splashimage=10080000\0" \ - "kerneladdr=100A0000\0" \ - "kernelsize=00800000\0" \ - "minifsaddr=108A0000\0" \ - "minifssize=00060000\0" \ - "rootfsaddr=10900000\0" \ - "copy_addr=20200000\0" \ - "rootfssize=01700000\0" \ - "kernelname=uImage_vl_ma2sc\0" \ - "bootargsdefaults=set bootargs " \ - "console=ttyS0,115200 " \ - "video=atmel_lcdfb " \ - "mem=62M " \ - "panic=10 " \ - "boardrevison=\\\"${revision}\\\" " \ - "uboot=\\\"${ver}\\\" " \ - "\0" \ - "update_all=run update_kernel;run update_root;" \ - "run update_splash; run update_uboot\0" \ - "update_kernel=protect off $(kerneladdr) +$(kernelsize);" \ - "dhcp $(copy_addr) $(kernelname);" \ - "erase $(kerneladdr) +$(kernelsize);" \ - "cp.b $(fileaddr) $(kerneladdr) $(filesize);" \ - "protect on $(kerneladdr) +$(kernelsize)" \ - "\0" \ - "update_root=protect off $(rootfsaddr) +$(rootfssize);" \ - "dhcp $(copy_addr) vl_ma2sc.root;" \ - "erase $(rootfsaddr) +$(rootfssize);" \ - "cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \ - "\0" \ - "update_splash=protect off $(splashimage) +20000;" \ - "dhcp $(copy_addr) splash_vl_ma2sc.bmp;" \ - "erase $(splashimage) +20000;" \ - "cp.b $(fileaddr) 10080000 $(filesize);" \ - "protect on $(splashimage) +20000\0" \ - "update_uboot=protect off 10000000 1005FFFF;" \ - "dhcp $(copy_addr) u-boot_vl_ma2sc;" \ - "erase 10000000 1005FFFF;" \ - "cp.b $(fileaddr) $(ubootaddr) $(filesize);" \ - "protect on 10000000 1005FFFF;reset\0" \ - "emergency=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=emergency " \ - ";bootm $(kerneladdr)\0" \ - "netemergency=run bootargsdefaults;" \ - "dhcp $(copy_addr) $(kernelname);" \ - "set bootargs $(bootargs) root=initramfs boot=emergency " \ - ";bootm $(copy_addr)\0" \ - "norboot=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=local quiet " \ - ";bootm $(kerneladdr)\0" \ - "nandboot=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=nand " \ - ";bootm $(kerneladdr)\0" \ - "setnorboot=set bootcmd 'run norboot'; set bootdelay 1;save\0" \ - "clearenv=protect off 10060000 1007FFFF;" \ - "erase 10060000 1007FFFF;reset\0" \ - " " - -#endif diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h deleted file mode 100644 index 976ba5db74..0000000000 --- a/include/configs/vpac270.h +++ /dev/null @@ -1,325 +0,0 @@ -/* - * Voipac PXA270 configuration file - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_VPAC270 1 /* Voipac PXA270 board */ -#define CONFIG_SYS_TEXT_BASE 0xa0000000 - -#ifdef CONFIG_ONENAND -#define CONFIG_SPL_ONENAND_SUPPORT -#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x2000 -#define CONFIG_SPL_ONENAND_LOAD_SIZE \ - (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR) -#define CONFIG_SPL_TEXT_BASE 0x5c000000 -#define CONFIG_SPL_LDSCRIPT "board/vpac270/u-boot-spl.lds" -#endif - -/* - * Environment settings - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOOTCOMMAND \ - "if mmc init && fatload mmc 0 0xa4000000 uImage; then " \ - "bootm 0xa4000000; " \ - "fi; " \ - "if usb reset && fatload usb 0 0xa4000000 uImage; then " \ - "bootm 0xa4000000; " \ - "fi; " \ - "if ide reset && fatload ide 0 0xa4000000 uImage; then " \ - "bootm 0xa4000000; " \ - "fi; " \ - "bootm 0x60000;" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "update_onenand=" \ - "onenand erase 0x0 0x80000 ; " \ - "onenand write 0xa0000000 0x0 0x80000" - -#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_LZMA /* LZMA compression support */ -#define CONFIG_OF_LIBFDT - -/* - * Serial Console Configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 -#define CONFIG_CONS_INDEX 3 -#define CONFIG_BAUDRATE 115200 - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_USB -#undef CONFIG_LCD -#define CONFIG_CMD_IDE - -#ifdef CONFIG_ONENAND -#define CONFIG_CMD_ONENAND -#else -#undef CONFIG_CMD_ONENAND -#endif - -/* - * Networking Configuration - * chip on the Voipac PXA270 board - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x08000300 /* CS2 */ -#define DM9000_IO (CONFIG_DM9000_BASE) -#define DM9000_DATA (CONFIG_DM9000_BASE + 4) -#define CONFIG_NET_RETRY_COUNT 10 - -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#endif - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP -#ifdef CONFIG_SYS_HUSH_PARSER -#else -#endif -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_DEVICE_NULLDEV 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE 1 - -/* - * Clock Configuration - */ -#define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */ - - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ - -#ifdef CONFIG_RAM_256M -#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ -#endif - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#ifdef CONFIG_RAM_256M -#define CONFIG_SYS_DRAM_SIZE 0x10000000 /* 256 MB DRAM */ -#else -#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */ -#endif - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000 - -/* - * NOR FLASH - */ -#define CONFIG_SYS_MONITOR_BASE 0x0 -#define CONFIG_SYS_MONITOR_LEN 0x80000 -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 - -#if defined(CONFIG_CMD_FLASH) /* NOR */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#ifdef CONFIG_RAM_256M -#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */ -#endif - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255) -#ifdef CONFIG_RAM_256M -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } -#else -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#endif - -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -#define CONFIG_SYS_FLASH_PROTECTION 1 - -#define CONFIG_ENV_IS_IN_FLASH 1 - -#elif defined(CONFIG_CMD_ONENAND) /* OneNAND */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ONENAND_BASE 0x00000000 - -#define CONFIG_ENV_IS_IN_ONENAND 1 - -#else /* No flash */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_NOWHERE -#endif - -/* - * IDE - */ -#ifdef CONFIG_CMD_IDE -#define CONFIG_LBA48 -#undef CONFIG_IDE_LED -#undef CONFIG_IDE_RESET - -#define __io - -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 - -#define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0 - -#define CONFIG_SYS_ATA_DATA_OFFSET 0x120 -#define CONFIG_SYS_ATA_REG_OFFSET 0x120 -#define CONFIG_SYS_ATA_ALT_OFFSET 0x120 - -#define CONFIG_SYS_ATA_STRIDE 2 -#endif - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0x01308800 -#define CONFIG_SYS_GPSR1_VAL 0x00cf0000 -#define CONFIG_SYS_GPSR2_VAL 0x922ac000 -#define CONFIG_SYS_GPSR3_VAL 0x0161e800 - -#define CONFIG_SYS_GPCR0_VAL 0x00010000 -#define CONFIG_SYS_GPCR1_VAL 0x0 -#define CONFIG_SYS_GPCR2_VAL 0x0 -#define CONFIG_SYS_GPCR3_VAL 0x0 - -#define CONFIG_SYS_GPDR0_VAL 0xcbb18800 -#define CONFIG_SYS_GPDR1_VAL 0xfccfa981 -#define CONFIG_SYS_GPDR2_VAL 0x922affff -#define CONFIG_SYS_GPDR3_VAL 0x0161e904 - -#define CONFIG_SYS_GAFR0_L_VAL 0x00100000 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5da8510 -#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a0aa -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x4109a401 -#define CONFIG_SYS_GAFR3_L_VAL 0x54010310 -#define CONFIG_SYS_GAFR3_U_VAL 0x00025401 - -#define CONFIG_SYS_PSSR_VAL 0x30 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x00500240 -#define CONFIG_SYS_CCCR 0x02000290 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x3ffc95f9 -#define CONFIG_SYS_MSC1_VAL 0x02ccf974 -#define CONFIG_SYS_MSC2_VAL 0x00000000 -#ifdef CONFIG_RAM_256M -#define CONFIG_SYS_MDCNFG_VAL 0x8ad30ad3 -#else -#define CONFIG_SYS_MDCNFG_VAL 0x88000ad3 -#endif -#define CONFIG_SYS_MDREFR_VAL 0x201fe01e -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x00014307 -#define CONFIG_SYS_MCMEM1_VAL 0x00014307 -#define CONFIG_SYS_MCATT0_VAL 0x0001c787 -#define CONFIG_SYS_MCATT1_VAL 0x0001c787 -#define CONFIG_SYS_MCIO0_VAL 0x0001430f -#define CONFIG_SYS_MCIO1_VAL 0x0001430f - -/* - * LCD - */ -#ifdef CONFIG_LCD -#define CONFIG_VOIPAC_LCD -#endif - -/* - * USB - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "vpac270" -#define CONFIG_USB_STORAGE -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index f4e9cf20c5..6e8aec267d 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -37,6 +37,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/warp.h b/include/configs/warp.h index fa102bbae7..3e9a5a3ef3 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -98,6 +98,8 @@ #define CONFIG_CMD_I2C #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_SPEED 100000 /* PMIC */ diff --git a/include/configs/wireless_space.h b/include/configs/wireless_space.h deleted file mode 100644 index 191ac1b73f..0000000000 --- a/include/configs/wireless_space.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net> - * - * Based on the netspace_v2 code which is - * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_WIRELESS_SPACE_H -#define _CONFIG_WIRELESS_SPACE_H - -/* - * Machine number definition - */ -#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */ -#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE -#define CONFIG_IDENT_STRING " Wireless Space" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -/* SoC name */ -#define CONFIG_KW88F6281 -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_NAND -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_USB - -/* - * Core clock definition - */ -#define CONFIG_SYS_TCLK 166000000 /* 166MHz */ - -/* - * SDRAM configuration - */ -#define CONFIG_NR_DRAM_BANKS 1 - -/* - * Different SDRAM configuration and size for some of the boards derived - * from the Network Space v2 - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* Remove or override few declarations from mv-common.h */ -#undef CONFIG_RBTREE -#undef CONFIG_SYS_IDE_MAXBUS -#undef CONFIG_SYS_IDE_MAXDEVICE -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */ -#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */ -#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */ -#define CONFIG_MII -#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_NETCONSOLE -#define CONFIG_MV88E61XX_SWITCH -#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE -#define CONFIG_MV88E61XX_CMD -#define CONFIG_CMD_TFTPPUT -#endif /* CONFIG_CMD_NET */ - -/* - * SATA Driver configuration - */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#endif /* CONFIG_MVSATA_IDE */ - -/* - * Enable GPI0 support - */ -#define CONFIG_KIRKWOOD_GPIO - -/* - * Enable I2C support - */ -#ifdef CONFIG_CMD_I2C -/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ -#define CONFIG_CMD_EEPROM -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */ -#endif /* CONFIG_CMD_I2C */ - -/* - * Partition support - */ -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION - -/* - * File systems support - */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - -/* - * Use the HUSH parser - */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Console configuration - */ -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* - * Enable device tree support - */ -#define CONFIG_OF_LIBFDT - -/* - * Environment variables configurations - */ - -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ -#define CONFIG_ENV_SIZE 0x20000 /* 128KB */ -#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ - -/* - * Board-specific command to make using buttons etc easier - */ - -#define CONFIG_WIRELESS_SPACE_CMD - -/* - * Default environment variables - */ -#define CONFIG_PREBOOT - -#define CONFIG_BOOTARGS "console=ttyS0,115200" - -#define CONFIG_BOOTCOMMAND \ - "if run usbload || run diskload; then bootm; fi" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" \ - "bootfile=uImage\0" \ - "loadaddr=0x800000\0" \ - "autoload=no\0" \ - "netconsole=" \ - "set stdin $stdin,nc; " \ - "set stdout $stdout,nc; " \ - "set stderr $stderr,nc;\0" \ - "diskload=ide reset && " \ - "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \ - "usbload=usb start && " \ - "fatload usb 0:1 $loadaddr /boot/$bootfile\0" \ - "preboot=" \ - "dhcp && run netconsole\0" - -#endif /* _CONFIG_WIRELESS_SPACE_H */ diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index 5d9f5297ce..fc4656567d 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -47,6 +47,8 @@ */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_SPD_BUS_NUM 0 #define CONFIG_MXC_SPI diff --git a/include/configs/x600.h b/include/configs/x600.h index 6a5738863a..73ba67c3e9 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -17,6 +17,7 @@ #define CONFIG_SPEAR600 /* SPEAr600 SoC */ #define CONFIG_X600 /* on X600 board */ #define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SYS_THUMB_BUILD #include <asm/arch/hardware.h> @@ -67,6 +68,8 @@ #define CONFIG_MTD_ECC_SOFT #define CONFIG_SYS_FSMC_NAND_8BIT #define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_NAND_ECC_BCH +#define CONFIG_BCH /* UBI/UBI config options */ #define CONFIG_MTD_DEVICE diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h deleted file mode 100644 index 8d19bffa02..0000000000 --- a/include/configs/xaeniax.h +++ /dev/null @@ -1,539 +0,0 @@ -/* - * (C) Copyright 2004-2005 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2004 - * Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.ne - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * Configuation settings for the xaeniax board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_CPU_PXA25X 1 /* This is an PXA255 CPU */ -#define CONFIG_XAENIAX 1 /* on a xaeniax board */ -#define CONFIG_SYS_TEXT_BASE 0x0 - -#define CONFIG_BOARD_LATE_INIT - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_BTUART 1 /* we use BTUART on XAENIAX */ -#define CONFIG_CONS_INDEX 4 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_DTT - - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.68.201 -#define CONFIG_SERVERIP 192.168.68.62 - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND "bootm 0x00100000" -#define CONFIG_BOOTARGS "console=ttyS1,115200" -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#endif - -/* - * Size of malloc() pool; this lives below the uppermost 128 KiB which are - * used for the RAM copy of the uboot code - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "u-boot$ " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "u-boot=> " /* Monitor Command Prompt */ -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */ - -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */ - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks (partition) of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* FIXME */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)/* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ - -/* - * SMSC91C111 Network Card - */ -#define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x10000300 /* chip select 3 */ -#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */ -#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ -#undef CONFIG_SHOW_ACTIVITY -#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ - -/* - * GPIO settings - */ - -/* - * GP05 == nUSBReset is 1 - * GP10 == CFReset is 1 - * GP13 == nCFDataEnable is 1 - * GP14 == nCFAddrEnable is 1 - * GP15 == nCS1 is 1 - * GP21 == ComBrdReset is 1 - * GP24 == SFRM is 1 - * GP25 == TXD is 1 - * GP31 == SYNC is 1 - * GP33 == nCS5 is 1 - * GP39 == FFTXD is 1 - * GP41 == RTS is 1 - * GP43 == BTTXD is 1 - * GP45 == BTRTS is 1 - * GP47 == TXD is 1 - * GP48 == nPOE is 1 - * GP49 == nPWE is 1 - * GP50 == nPIOR is 1 - * GP51 == nPIOW is 1 - * GP52 == nPCE[1] is 1 - * GP53 == nPCE[2] is 1 - * GP54 == nPSKTSEL is 1 - * GP55 == nPREG is 1 - * GP78 == nCS2 is 1 - * GP79 == nCS3 is 1 - * GP80 == nCS4 is 1 - * GP82 == NSSPSFRM is 1 - * GP83 == NSSPTXD is 1 - */ -#define CONFIG_SYS_GPSR0_VAL 0x8320E420 -#define CONFIG_SYS_GPSR1_VAL 0x00FFAA82 -#define CONFIG_SYS_GPSR2_VAL 0x000DC000 - -/* - * GP03 == LANReset is 0 - * GP06 == USBWakeUp is 0 - * GP11 == USBControl is 0 - * GP12 == Buzzer is 0 - * GP16 == PWM0 is 0 - * GP17 == PWM1 is 0 - * GP23 == SCLK is 0 - * GP30 == SDATA_OUT is 0 - * GP81 == NSSPCLK is 0 - */ -#define CONFIG_SYS_GPCR0_VAL 0x40C31848 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00020000 - -/* - * GP00 == CPUWakeUpUSB is input - * GP01 == GP reset is input - * GP02 == LANInterrupt is input - * GP03 == LANReset is output - * GP04 == USBInterrupt is input - * GP05 == nUSBReset is output - * GP06 == USBWakeUp is output - * GP07 == CFReady/nBusy is input - * GP08 == nCFCardDetect1 is input - * GP09 == nCFCardDetect2 is input - * GP10 == nCFReset is output - * GP11 == USBControl is output - * GP12 == Buzzer is output - * GP13 == CFDataEnable is output - * GP14 == CFAddressEnable is output - * GP15 == nCS1 is output - * GP16 == PWM0 is output - * GP17 == PWM1 is output - * GP18 == RDY is input - * GP19 == ReaderReady is input - * GP20 == ReaderReset is input - * GP21 == ComBrdReset is output - * GP23 == SCLK is output - * GP24 == SFRM is output - * GP25 == TXD is output - * GP26 == RXD is input - * GP27 == EXTCLK is input - * GP28 == BITCLK is output - * GP29 == SDATA_IN0 is input - * GP30 == SDATA_OUT is output - * GP31 == SYNC is output - * GP32 == SYSSCLK is output - * GP33 == nCS5 is output - * GP34 == FFRXD is input - * GP35 == CTS is input - * GP36 == DCD is input - * GP37 == DSR is input - * GP38 == RI is input - * GP39 == FFTXD is output - * GP40 == DTR is output - * GP41 == RTS is output - * GP42 == BTRXD is input - * GP43 == BTTXD is output - * GP44 == BTCTS is input - * GP45 == BTRTS is output - * GP46 == RXD is input - * GP47 == TXD is output - * GP48 == nPOE is output - * GP49 == nPWE is output - * GP50 == nPIOR is output - * GP51 == nPIOW is output - * GP52 == nPCE[1] is output - * GP53 == nPCE[2] is output - * GP54 == nPSKTSEL is output - * GP55 == nPREG is output - * GP56 == nPWAIT is input - * GP57 == nPIOS16 is input - * GP58 == LDD[0] is output - * GP59 == LDD[1] is output - * GP60 == LDD[2] is output - * GP61 == LDD[3] is output - * GP62 == LDD[4] is output - * GP63 == LDD[5] is output - * GP64 == LDD[6] is output - * GP65 == LDD[7] is output - * GP66 == LDD[8] is output - * GP67 == LDD[9] is output - * GP68 == LDD[10] is output - * GP69 == LDD[11] is output - * GP70 == LDD[12] is output - * GP71 == LDD[13] is output - * GP72 == LDD[14] is output - * GP73 == LDD[15] is output - * GP74 == LCD_FCLK is output - * GP75 == LCD_LCLK is output - * GP76 == LCD_PCLK is output - * GP77 == LCD_ACBIAS is output - * GP78 == nCS2 is output - * GP79 == nCS3 is output - * GP80 == nCS4 is output - * GP81 == NSSPCLK is output - * GP82 == NSSPSFRM is output - * GP83 == NSSPTXD is output - * GP84 == NSSPRXD is input - */ -#define CONFIG_SYS_GPDR0_VAL 0xD3E3FC68 -#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB83 -#define CONFIG_SYS_GPDR2_VAL 0x000FFFFF - -/* - * GP01 == GP reset is AF01 - * GP15 == nCS1 is AF10 - * GP16 == PWM0 is AF10 - * GP17 == PWM1 is AF10 - * GP18 == RDY is AF01 - * GP23 == SCLK is AF10 - * GP24 == SFRM is AF10 - * GP25 == TXD is AF10 - * GP26 == RXD is AF01 - * GP27 == EXTCLK is AF01 - * GP28 == BITCLK is AF01 - * GP29 == SDATA_IN0 is AF10 - * GP30 == SDATA_OUT is AF01 - * GP31 == SYNC is AF01 - * GP32 == SYSCLK is AF01 - * GP33 == nCS5 is AF10 - * GP34 == FFRXD is AF01 - * GP35 == CTS is AF01 - * GP36 == DCD is AF01 - * GP37 == DSR is AF01 - * GP38 == RI is AF01 - * GP39 == FFTXD is AF10 - * GP40 == DTR is AF10 - * GP41 == RTS is AF10 - * GP42 == BTRXD is AF01 - * GP43 == BTTXD is AF10 - * GP44 == BTCTS is AF01 - * GP45 == BTRTS is AF10 - * GP46 == RXD is AF10 - * GP47 == TXD is AF01 - * GP48 == nPOE is AF10 - * GP49 == nPWE is AF10 - * GP50 == nPIOR is AF10 - * GP51 == nPIOW is AF10 - * GP52 == nPCE[1] is AF10 - * GP53 == nPCE[2] is AF10 - * GP54 == nPSKTSEL is AF10 - * GP55 == nPREG is AF10 - * GP56 == nPWAIT is AF01 - * GP57 == nPIOS16 is AF01 - * GP58 == LDD[0] is AF10 - * GP59 == LDD[1] is AF10 - * GP60 == LDD[2] is AF10 - * GP61 == LDD[3] is AF10 - * GP62 == LDD[4] is AF10 - * GP63 == LDD[5] is AF10 - * GP64 == LDD[6] is AF10 - * GP65 == LDD[7] is AF10 - * GP66 == LDD[8] is AF10 - * GP67 == LDD[9] is AF10 - * GP68 == LDD[10] is AF10 - * GP69 == LDD[11] is AF10 - * GP70 == LDD[12] is AF10 - * GP71 == LDD[13] is AF10 - * GP72 == LDD[14] is AF10 - * GP73 == LDD[15] is AF10 - * GP74 == LCD_FCLK is AF10 - * GP75 == LCD_LCLK is AF10 - * GP76 == LCD_PCLK is AF10 - * GP77 == LCD_ACBIAS is AF10 - * GP78 == nCS2 is AF10 - * GP79 == nCS3 is AF10 - * GP80 == nCS4 is AF10 - * GP81 == NSSPCLK is AF01 - * GP82 == NSSPSFRM is AF01 - * GP83 == NSSPTXD is AF01 - * GP84 == NSSPRXD is AF10 - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000004 -#define CONFIG_SYS_GAFR0_U_VAL 0x595A801A -#define CONFIG_SYS_GAFR1_L_VAL 0x699A9559 -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA -#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA -#define CONFIG_SYS_GAFR2_U_VAL 0x00000256 - -/* - * clock settings - */ -/* RDH = 1 - * PH = 0 - * VFS = 0 - * BFS = 0 - * SSS = 0 - */ -#define CONFIG_SYS_PSSR_VAL 0x00000030 - -#define CONFIG_SYS_CKEN 0x00000080 /* */ -#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 - - -/* - * Memory settings - * - * This is the configuration for nCS0/1 -> flash banks - * configuration for nCS1 : - * [31] 0 - - * [30:28] 000 - - * [27:24] 0000 - - * [23:20] 0000 - - * [19] 0 - - * [18:16] 000 - - * configuration for nCS0: - * [15] 0 - Slower Device - * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [11:08] 0011 - Address to data valid in bursts: (3+1)*MemClk = 40 ns - * [07:04] 1111 - " for first access: (23+2)*MemClk = 250 ns (fixme 12+2?) - * [03] 0 - 32 Bit bus width - * [02:00] 010 - burst OF 4 ROM or FLASH -*/ -#define CONFIG_SYS_MSC0_VAL 0x000023D2 - -/* This is the configuration for nCS2/3 -> USB controller, LAN - * configuration for nCS3: LAN - * [31] 0 - Slower Device - * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns - * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [23:20] 0010 - RDF3: Address for first access: (2+1)*MemClk = 30 ns - * [19] 0 - 32 Bit bus width - * [18:16] 100 - variable latency I/O - * configuration for nCS2: USB - * [15] 1 - Faster Device - * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns - * [03] 1 - 16 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC1_VAL 0x1224A26C - -/* This is the configuration for nCS4/5 -> LAN - * configuration for nCS5: - * [31] 0 - - * [30:28] 000 - - * [27:24] 0000 - - * [23:20] 0000 - - * [19] 0 - - * [18:16] 000 - - * configuration for nCS4: LAN - * [15] 1 - Faster Device - * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns - * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns - * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns - * [03] 0 - 32 Bit bus width - * [02:00] 100 - variable latency I/O - */ -#define CONFIG_SYS_MSC2_VAL 0x00001224 - -/* MDCNFG: SDRAM Configuration Register - * - * [31:29] 000 - reserved - * [28] 0 - no SA1111 compatiblity mode - * [27] 0 - latch return data with return clock - * [26] 0 - alternate addressing for pair 2/3 - * [25:24] 00 - timings - * [23] 0 - internal banks in lower partition 2/3 (not used) - * [22:21] 00 - row address bits for partition 2/3 (not used) - * [20:19] 00 - column address bits for partition 2/3 (not used) - * [18] 0 - SDRAM partition 2/3 width is 32 bit - * [17] 0 - SDRAM partition 3 disabled - * [16] 0 - SDRAM partition 2 disabled - * [15:13] 000 - reserved - * [12] 0 - no SA1111 compatiblity mode - * [11] 1 - latch return data with return clock - * [10] 0 - no alternate addressing for pair 0/1 - * [09:08] 10 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk - * [7] 1 - 4 internal banks in lower partition pair - * [06:05] 10 - 13 row address bits for partition 0/1 - * [04:03] 01 - 9 column address bits for partition 0/1 - * [02] 0 - SDRAM partition 0/1 width is 32 bit - * [01] 0 - disable SDRAM partition 1 - * [00] 1 - enable SDRAM partition 0 - */ -/* use the configuration above but disable partition 0 */ -#define CONFIG_SYS_MDCNFG_VAL 0x00000AC9 - -/* MDREFR: SDRAM Refresh Control Register - * - * [32:26] 0 - reserved - * [25] 0 - K2FREE: not free running - * [24] 0 - K1FREE: not free running - * [23] 0 - K0FREE: not free running - * [22] 0 - SLFRSH: self refresh disabled - * [21] 0 - reserved - * [20] 1 - APD: auto power down - * [19] 0 - K2DB2: SDCLK2 is MemClk - * [18] 0 - K2RUN: disable SDCLK2 - * [17] 0 - K1DB2: SDCLK1 is MemClk - * [16] 1 - K1RUN: enable SDCLK1 - * [15] 1 - E1PIN: SDRAM clock enable - * [14] 0 - K0DB2: SDCLK0 is MemClk - * [13] 0 - K0RUN: disable SDCLK0 - * [12] 0 - E0PIN: disable SDCKE0 - * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 - */ -#define CONFIG_SYS_MDREFR_VAL 0x00138018 /* mh: was 0x00118018 */ - -/* MDMRS: Mode Register Set Configuration Register - * - * [31] 0 - reserved - * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used) - * [22:20] 011 - MDCL2: SDRAM2/3 Cas Latency. (not used) - * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used) - * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used) - * [15] 0 - reserved - * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value. - * [06:04] 011 - MDCL0: SDRAM0/1 Cas Latency. - * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. - * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. - */ -#define CONFIG_SYS_MDMRS_VAL 0x00320032 - -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00004715 -#define CONFIG_SYS_MCIO1_VAL 0x00004715 - - -#endif /* __CONFIG_H */ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 669aa53c91..b5d1126d59 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -138,7 +138,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NAND_ACTL_CLE (1 << 15) /* C_LA15 */ #define CONFIG_SYS_NAND_ACTL_NCE 0 /* NCE not controlled by ADDR */ #define CONFIG_SYS_NAND_ACTL_DELAY 25 -#define CONFIG_SYS_NAND_QUIET_TEST #define CONFIG_JFFS2_NAND /* diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 58ace2cf48..0d2423499d 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -131,7 +131,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2} #define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ #define CONFIG_NAND_FSL_ELBC /* diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 765aaadf10..f30d1996c0 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -122,7 +122,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2} #define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ #define CONFIG_NAND_FSL_ELBC /* diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h deleted file mode 100644 index 0199190eb8..0000000000 --- a/include/configs/zipitz2.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * Aeronix Zipit Z2 configuration file - * - * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */ -#define CONFIG_SYS_TEXT_BASE 0x0 - -#undef CONFIG_BOARD_LATE_INIT -#undef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_PREBOOT - -/* - * Environment settings - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_SIZE 0x20000 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\ - "then " \ - "source 0xa0000000; " \ - "else " \ - "bootm 0x60000; " \ - "fi; " -#define CONFIG_BOOTARGS \ - "console=tty0 console=ttyS2,115200 fbcon=rotate:3" -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_TEXT_BASE 0x0 -#define CONFIG_LZMA /* LZMA compression support */ - -/* - * Serial Console Configuration - * STUART - the lower serial port on Colibri board - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_STUART 1 -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_SPI - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION -#endif - -/* - * SPI and LCD - */ -#ifdef CONFIG_CMD_SPI -#define CONFIG_SOFT_SPI -#define CONFIG_LCD -#define CONFIG_PXA_LCD -#define CONFIG_LMS283GF05 -#define CONFIG_VIDEO_LOGO -#define CONFIG_CMD_BMP -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) - -#define SPI_DELAY udelay(10) -#define SPI_SDA(val) zipitz2_spi_sda(val) -#define SPI_SCL(val) zipitz2_spi_scl(val) -#define SPI_READ zipitz2_spi_read() -#ifndef __ASSEMBLY__ -void zipitz2_spi_sda(int); -void zipitz2_spi_scl(int); -unsigned char zipitz2_spi_read(void); -#endif -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -/* - * Clock Configuration - */ -#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ - -/* - * SRAM Map - */ -#define PHYS_SRAM 0x5c000000 /* SRAM Bank #1 */ -#define PHYS_SRAM_SIZE 0x00040000 /* 256k */ - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048) - -/* - * NOR FLASH - */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ -#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 -#define CONFIG_SYS_FLASH_LOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_PROTECTION - -/* - * GPIO settings - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x02000140 -#define CONFIG_SYS_GAFR0_U_VAL 0x59188000 -#define CONFIG_SYS_GAFR1_L_VAL 0x63900002 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950 -#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x29000308 -#define CONFIG_SYS_GAFR3_L_VAL 0x54000000 -#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5 -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000020 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CONFIG_SYS_GPCR3_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0xdafcee00 -#define CONFIG_SYS_GPDR1_VAL 0xffa3aaab -#define CONFIG_SYS_GPDR2_VAL 0x8fe9ffff -#define CONFIG_SYS_GPDR3_VAL 0x001b1f8a -#define CONFIG_SYS_GPSR0_VAL 0x06080400 -#define CONFIG_SYS_GPSR1_VAL 0x007f0000 -#define CONFIG_SYS_GPSR2_VAL 0x032a0000 -#define CONFIG_SYS_GPSR3_VAL 0x00000180 - -#define CONFIG_SYS_PSSR_VAL 0x30 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x00511220 -#define CONFIG_SYS_CCCR 0x00000190 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x2ffc38f8 -#define CONFIG_SYS_MSC1_VAL 0x0000ccd1 -#define CONFIG_SYS_MSC2_VAL 0x0000b884 -#define CONFIG_SYS_MDCNFG_VAL 0x08000ba9 -#define CONFIG_SYS_MDREFR_VAL 0x2011a01e -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x00014307 -#define CONFIG_SYS_MCMEM1_VAL 0x00014307 -#define CONFIG_SYS_MCATT0_VAL 0x0001c787 -#define CONFIG_SYS_MCATT1_VAL 0x0001c787 -#define CONFIG_SYS_MCIO0_VAL 0x0001430f -#define CONFIG_SYS_MCIO1_VAL 0x0001430f - -#endif /* __CONFIG_H */ diff --git a/include/dm/device.h b/include/dm/device.h index a239be6469..85196124b4 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -485,6 +485,17 @@ bool device_is_last_sibling(struct udevice *dev); */ int device_set_name(struct udevice *dev, const char *name); +/** + * device_is_on_pci_bus - Test if a device is on a PCI bus + * + * @dev: device to test + * @return: true if it is on a PCI bus, false otherwise + */ +static inline bool device_is_on_pci_bus(struct udevice *dev) +{ + return device_get_uclass_id(dev->parent) == UCLASS_PCI; +} + /* device resource management */ typedef void (*dr_release_t)(struct udevice *dev, void *res); typedef int (*dr_match_t)(struct udevice *dev, void *res, void *match_data); diff --git a/include/env_flags.h b/include/env_flags.h index 2d2de88fc0..8823fb9602 100644 --- a/include/env_flags.h +++ b/include/env_flags.h @@ -109,6 +109,13 @@ enum env_flags_varaccess env_flags_parse_varaccess(const char *flags); */ enum env_flags_varaccess env_flags_parse_varaccess_from_binflags(int binflags); +#ifdef CONFIG_CMD_NET +/* + * Check if a string has the format of an Ethernet MAC address + */ +int eth_validate_ethaddr_str(const char *addr); +#endif + #ifdef USE_HOSTCC /* * Look up the type of a variable directly from the .flags var. diff --git a/include/ethsw.h b/include/ethsw.h new file mode 100644 index 0000000000..2d3c12a39e --- /dev/null +++ b/include/ethsw.h @@ -0,0 +1,95 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Ethernet Switch commands + */ + +#ifndef _CMD_ETHSW_H_ +#define _CMD_ETHSW_H_ + +#define ETHSW_MAX_CMD_PARAMS 20 +#define ETHSW_CMD_PORT_ALL -1 +#define ETHSW_CMD_VLAN_ALL -1 + +/* IDs used to track keywords in a command */ +enum ethsw_keyword_id { + ethsw_id_key_end = -1, + ethsw_id_help, + ethsw_id_show, + ethsw_id_port, + ethsw_id_enable, + ethsw_id_disable, + ethsw_id_statistics, + ethsw_id_clear, + ethsw_id_learning, + ethsw_id_auto, + ethsw_id_vlan, + ethsw_id_fdb, + ethsw_id_add, + ethsw_id_del, + ethsw_id_flush, + ethsw_id_pvid, + ethsw_id_untagged, + ethsw_id_all, + ethsw_id_none, + ethsw_id_egress, + ethsw_id_tag, + ethsw_id_classified, + ethsw_id_shared, + ethsw_id_private, + ethsw_id_ingress, + ethsw_id_filtering, + ethsw_id_count, /* keep last */ +}; + +enum ethsw_keyword_opt_id { + ethsw_id_port_no = ethsw_id_count + 1, + ethsw_id_vlan_no, + ethsw_id_pvid_no, + ethsw_id_add_del_no, + ethsw_id_add_del_mac, + ethsw_id_count_all, /* keep last */ +}; + +struct ethsw_command_def { + int cmd_to_keywords[ETHSW_MAX_CMD_PARAMS]; + int cmd_keywords_nr; + int port; + int vid; + uchar ethaddr[6]; + int (*cmd_function)(struct ethsw_command_def *parsed_cmd); +}; + +/* Structure to be created and initialized by an Ethernet Switch driver */ +struct ethsw_command_func { + const char *ethsw_name; + int (*port_enable)(struct ethsw_command_def *parsed_cmd); + int (*port_disable)(struct ethsw_command_def *parsed_cmd); + int (*port_show)(struct ethsw_command_def *parsed_cmd); + int (*port_stats)(struct ethsw_command_def *parsed_cmd); + int (*port_stats_clear)(struct ethsw_command_def *parsed_cmd); + int (*port_learn)(struct ethsw_command_def *parsed_cmd); + int (*port_learn_show)(struct ethsw_command_def *parsed_cmd); + int (*fdb_show)(struct ethsw_command_def *parsed_cmd); + int (*fdb_flush)(struct ethsw_command_def *parsed_cmd); + int (*fdb_entry_add)(struct ethsw_command_def *parsed_cmd); + int (*fdb_entry_del)(struct ethsw_command_def *parsed_cmd); + int (*pvid_show)(struct ethsw_command_def *parsed_cmd); + int (*pvid_set)(struct ethsw_command_def *parsed_cmd); + int (*vlan_show)(struct ethsw_command_def *parsed_cmd); + int (*vlan_set)(struct ethsw_command_def *parsed_cmd); + int (*port_untag_show)(struct ethsw_command_def *parsed_cmd); + int (*port_untag_set)(struct ethsw_command_def *parsed_cmd); + int (*port_egr_vlan_show)(struct ethsw_command_def *parsed_cmd); + int (*port_egr_vlan_set)(struct ethsw_command_def *parsed_cmd); + int (*vlan_learn_show)(struct ethsw_command_def *parsed_cmd); + int (*vlan_learn_set)(struct ethsw_command_def *parsed_cmd); + int (*port_ingr_filt_show)(struct ethsw_command_def *parsed_cmd); + int (*port_ingr_filt_set)(struct ethsw_command_def *parsed_cmd); +}; + +int ethsw_define_functions(const struct ethsw_command_func *cmd_func); + +#endif /* _CMD_ETHSW_H_ */ diff --git a/include/fdtdec.h b/include/fdtdec.h index a422ecedb8..2de6dda04c 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -295,10 +295,90 @@ int fdtdec_next_compatible(const void *blob, int node, int fdtdec_next_compatible_subnode(const void *blob, int node, enum fdt_compat_id id, int *depthp); -/** - * Look up an address property in a node and return it as an address. - * The property must hold either one address with no trailing data or - * one address with a length. This is only tested on 32-bit machines. +/* + * Look up an address property in a node and return the parsed address, and + * optionally the parsed size. + * + * This variant assumes a known and fixed number of cells are used to + * represent the address and size. + * + * You probably don't want to use this function directly except to parse + * non-standard properties, and never to parse the "reg" property. Instead, + * use one of the "auto" variants below, which automatically honor the + * #address-cells and #size-cells properties in the parent node. + * + * @param blob FDT blob + * @param node node to examine + * @param prop_name name of property to find + * @param index which address to retrieve from a list of addresses. Often 0. + * @param na the number of cells used to represent an address + * @param ns the number of cells used to represent a size + * @param sizep a pointer to store the size into. Use NULL if not required + * @return address, if found, or FDT_ADDR_T_NONE if not + */ +fdt_addr_t fdtdec_get_addr_size_fixed(const void *blob, int node, + const char *prop_name, int index, int na, int ns, + fdt_size_t *sizep); + +/* + * Look up an address property in a node and return the parsed address, and + * optionally the parsed size. + * + * This variant automatically determines the number of cells used to represent + * the address and size by parsing the provided parent node's #address-cells + * and #size-cells properties. + * + * @param blob FDT blob + * @param parent parent node of @node + * @param node node to examine + * @param prop_name name of property to find + * @param index which address to retrieve from a list of addresses. Often 0. + * @param sizep a pointer to store the size into. Use NULL if not required + * @return address, if found, or FDT_ADDR_T_NONE if not + */ +fdt_addr_t fdtdec_get_addr_size_auto_parent(const void *blob, int parent, + int node, const char *prop_name, int index, fdt_size_t *sizep); + +/* + * Look up an address property in a node and return the parsed address, and + * optionally the parsed size. + * + * This variant automatically determines the number of cells used to represent + * the address and size by parsing the parent node's #address-cells + * and #size-cells properties. The parent node is automatically found. + * + * The automatic parent lookup implemented by this function is slow. + * Consequently, fdtdec_get_addr_size_auto_parent() should be used where + * possible. + * + * @param blob FDT blob + * @param parent parent node of @node + * @param node node to examine + * @param prop_name name of property to find + * @param index which address to retrieve from a list of addresses. Often 0. + * @param sizep a pointer to store the size into. Use NULL if not required + * @return address, if found, or FDT_ADDR_T_NONE if not + */ +fdt_addr_t fdtdec_get_addr_size_auto_noparent(const void *blob, int node, + const char *prop_name, int index, fdt_size_t *sizep); + +/* + * Look up an address property in a node and return the parsed address. + * + * This variant hard-codes the number of cells used to represent the address + * and size based on sizeof(fdt_addr_t) and sizeof(fdt_size_t). It also + * always returns the first address value in the property (index 0). + * + * Use of this function is not recommended due to the hard-coding of cell + * counts. There is no programmatic validation that these hard-coded values + * actually match the device tree content in any way at all. This assumption + * can be satisfied by manually ensuring CONFIG_PHYS_64BIT is appropriately + * set in the U-Boot build and exercising strict control over DT content to + * ensure use of matching #address-cells/#size-cells properties. However, this + * approach is error-prone; those familiar with DT will not expect the + * assumption to exist, and could easily invalidate it. If the assumption is + * invalidated, this function will not report the issue, and debugging will + * be required. Instead, use fdtdec_get_addr_size_auto_parent(). * * @param blob FDT blob * @param node node to examine @@ -308,14 +388,29 @@ int fdtdec_next_compatible_subnode(const void *blob, int node, fdt_addr_t fdtdec_get_addr(const void *blob, int node, const char *prop_name); -/** - * Look up an address property in a node and return it as an address. - * The property must hold one address with a length. This is only tested - * on 32-bit machines. +/* + * Look up an address property in a node and return the parsed address, and + * optionally the parsed size. + * + * This variant hard-codes the number of cells used to represent the address + * and size based on sizeof(fdt_addr_t) and sizeof(fdt_size_t). It also + * always returns the first address value in the property (index 0). + * + * Use of this function is not recommended due to the hard-coding of cell + * counts. There is no programmatic validation that these hard-coded values + * actually match the device tree content in any way at all. This assumption + * can be satisfied by manually ensuring CONFIG_PHYS_64BIT is appropriately + * set in the U-Boot build and exercising strict control over DT content to + * ensure use of matching #address-cells/#size-cells properties. However, this + * approach is error-prone; those familiar with DT will not expect the + * assumption to exist, and could easily invalidate it. If the assumption is + * invalidated, this function will not report the issue, and debugging will + * be required. Instead, use fdtdec_get_addr_size_auto_parent(). * * @param blob FDT blob * @param node node to examine * @param prop_name name of property to find + * @param sizep a pointer to store the size into. Use NULL if not required * @return address, if found, or FDT_ADDR_T_NONE if not */ fdt_addr_t fdtdec_get_addr_size(const void *blob, int node, diff --git a/include/fsl-mc/fsl_mc.h b/include/fsl-mc/fsl_mc.h index 9106f25f68..9517a4a7b5 100644 --- a/include/fsl-mc/fsl_mc.h +++ b/include/fsl-mc/fsl_mc.h @@ -12,7 +12,6 @@ #define MC_CCSR_BASE_ADDR \ ((struct mc_ccsr_registers __iomem *)0x8340000) -#define BIT(x) (1 << (x)) #define GCR1_P1_STOP BIT(31) #define GCR1_P2_STOP BIT(30) #define GCR1_P1_DE_RST BIT(23) diff --git a/include/fsl_wdog.h b/include/fsl_wdog.h new file mode 100644 index 0000000000..d15a70cedb --- /dev/null +++ b/include/fsl_wdog.h @@ -0,0 +1,18 @@ +/* + * (C) Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +struct watchdog_regs { + u16 wcr; /* Control */ + u16 wsr; /* Service */ + u16 wrsr; /* Reset Status */ +}; + +#define WCR_WDZST 0x01 +#define WCR_WDBG 0x02 +#define WCR_WDE 0x04 +#define WCR_WDT 0x08 +#define WCR_SRS 0x10 +#define SET_WCR_WT(x) (x << 8) diff --git a/include/image.h b/include/image.h index 8a864aeb22..08ae24a86b 100644 --- a/include/image.h +++ b/include/image.h @@ -259,6 +259,7 @@ struct lmb; #define IH_COMP_BZIP2 2 /* bzip2 Compression Used */ #define IH_COMP_LZMA 3 /* lzma Compression Used */ #define IH_COMP_LZO 4 /* lzo Compression Used */ +#define IH_COMP_LZ4 5 /* lz4 Compression Used */ #define IH_MAGIC 0x27051956 /* Image Magic Number */ #define IH_NMLEN 32 /* Image Name Length */ diff --git a/include/linux/bitops.h b/include/linux/bitops.h index e724310298..7d30ace41f 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -3,6 +3,8 @@ #include <asm/types.h> +#define BIT(nr) (1UL << (nr)) + /* * ffs: find first bit set. This is defined the same way as * the libc and compiler builtin ffs routines, therefore diff --git a/include/memalign.h b/include/memalign.h new file mode 100644 index 0000000000..a960039083 --- /dev/null +++ b/include/memalign.h @@ -0,0 +1,116 @@ +/* + * Copyright (c) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ALIGNMEM_H +#define __ALIGNMEM_H + +/* + * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It + * is used to align DMA buffers. + */ +#ifndef __ASSEMBLY__ +#include <asm/cache.h> +#include <malloc.h> + +/* + * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the + * stack that meets the minimum architecture alignment requirements for DMA. + * Such a buffer is useful for DMA operations where flushing and invalidating + * the cache before and after a read and/or write operation is required for + * correct operations. + * + * When called the macro creates an array on the stack that is sized such + * that: + * + * 1) The beginning of the array can be advanced enough to be aligned. + * + * 2) The size of the aligned portion of the array is a multiple of the minimum + * architecture alignment required for DMA. + * + * 3) The aligned portion contains enough space for the original number of + * elements requested. + * + * The macro then creates a pointer to the aligned portion of this array and + * assigns to the pointer the address of the first element in the aligned + * portion of the array. + * + * Calling the macro as: + * + * ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024); + * + * Will result in something similar to saying: + * + * uint32_t buffer[1024]; + * + * The following differences exist: + * + * 1) The resulting buffer is guaranteed to be aligned to the value of + * ARCH_DMA_MINALIGN. + * + * 2) The buffer variable created by the macro is a pointer to the specified + * type, and NOT an array of the specified type. This can be very important + * if you want the address of the buffer, which you probably do, to pass it + * to the DMA hardware. The value of &buffer is different in the two cases. + * In the macro case it will be the address of the pointer, not the address + * of the space reserved for the buffer. However, in the second case it + * would be the address of the buffer. So if you are replacing hard coded + * stack buffers with this macro you need to make sure you remove the & from + * the locations where you are taking the address of the buffer. + * + * Note that the size parameter is the number of array elements to allocate, + * not the number of bytes. + * + * This macro can not be used outside of function scope, or for the creation + * of a function scoped static buffer. It can not be used to create a cache + * line aligned global buffer. + */ +#define PAD_COUNT(s, pad) (((s) - 1) / (pad) + 1) +#define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad) +#define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad) \ + char __##name[ROUND(PAD_SIZE((size) * sizeof(type), pad), align) \ + + (align - 1)]; \ + \ + type *name = (type *)ALIGN((uintptr_t)__##name, align) +#define ALLOC_ALIGN_BUFFER(type, name, size, align) \ + ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, 1) +#define ALLOC_CACHE_ALIGN_BUFFER_PAD(type, name, size, pad) \ + ALLOC_ALIGN_BUFFER_PAD(type, name, size, ARCH_DMA_MINALIGN, pad) +#define ALLOC_CACHE_ALIGN_BUFFER(type, name, size) \ + ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN) + +/* + * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's + * purpose is to allow allocating aligned buffers outside of function scope. + * Usage of this macro shall be avoided or used with extreme care! + */ +#define DEFINE_ALIGN_BUFFER(type, name, size, align) \ + static char __##name[ALIGN(size * sizeof(type), align)] \ + __aligned(align); \ + \ + static type *name = (type *)__##name +#define DEFINE_CACHE_ALIGN_BUFFER(type, name, size) \ + DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN) + +/** + * malloc_cache_aligned() - allocate a memory region aligned to cache line size + * + * This allocates memory at a cache-line boundary. The amount allocated may + * be larger than requested as it is rounded up to the nearest multiple of the + * cache-line size. This ensured that subsequent cache operations on this + * memory (flush, invalidate) will not affect subsequently allocated regions. + * + * @size: Minimum number of bytes to allocate + * + * @return pointer to new memory region, or NULL if there is no more memory + * available. + */ +static inline void *malloc_cache_aligned(size_t size) +{ + return memalign(ARCH_DMA_MINALIGN, ALIGN(size, ARCH_DMA_MINALIGN)); +} +#endif + +#endif /* __ALIGNMEM_H */ diff --git a/include/net.h b/include/net.h index f1671e38de..3a787cc4e9 100644 --- a/include/net.h +++ b/include/net.h @@ -149,7 +149,9 @@ struct udevice *eth_get_dev(void); /* get the current device */ */ struct udevice *eth_get_dev_by_name(const char *devname); unsigned char *eth_get_ethaddr(void); /* get the current device MAC */ + /* Used only when NetConsole is enabled */ +int eth_is_active(struct udevice *dev); /* Test device for active state */ int eth_init_state_only(void); /* Set active state */ void eth_halt_state_only(void); /* Set passive state */ #endif @@ -195,6 +197,8 @@ static inline unsigned char *eth_get_ethaddr(void) return NULL; } +/* Used only when NetConsole is enabled */ +int eth_is_active(struct eth_device *dev); /* Test device for active state */ /* Set active state */ static inline __attribute__((always_inline)) int eth_init_state_only(void) { diff --git a/include/nomadik.h b/include/nomadik.h deleted file mode 100644 index ea65b2d828..0000000000 --- a/include/nomadik.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Collection of constants used to access Nomadik registers */ - -#ifndef __NOMADIK_H__ -#define __NOMADIK_H__ - -/* Base addresses of our peripherals */ -#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */ -#define NOMADIK_SRC_BASE 0x101E0000 /* System and Reset Cnt */ -#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */ -#define NOMADIK_MPMC_BASE 0x10110000 /* SDRAM Controller */ -#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC Controller */ -#define NOMADIK_1NAND_BASE 0x30000000 -#define NOMADIK_GPIO0_BASE 0x101E4000 -#define NOMADIK_GPIO1_BASE 0x101E5000 -#define NOMADIK_GPIO2_BASE 0x101E6000 -#define NOMADIK_GPIO3_BASE 0x101E7000 -#define NOMADIK_CPLD_BASE 0x36000000 -#define NOMADIK_UART0_BASE 0x101FD000 -#define NOMADIK_UART1_BASE 0x101FB000 -#define NOMADIK_UART2_BASE 0x101F2000 - -#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */ -#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */ - -#define NOMADIK_RTC_BASE 0x101E8000 -#define NOMADIK_ETH0_BASE 0x36800300 -#define NOMADIK_CPLD_UART_BASE 0x36480000 - -/* Chip select registers ("Flexible Static Memory Controller") */ - -#define REG_FSMC_BCR0 (NOMADIK_FSMC_BASE + 0x00) -#define REG_FSMC_BTR0 (NOMADIK_FSMC_BASE + 0x04) -#define REG_FSMC_BCR1 (NOMADIK_FSMC_BASE + 0x08) -#define REG_FSMC_BTR1 (NOMADIK_FSMC_BASE + 0x0c) -#define REG_FSMC_PCR0 (NOMADIK_FSMC_BASE + 0x40) -#define REG_FSMC_PMEM0 (NOMADIK_FSMC_BASE + 0x48) -#define REG_FSMC_PATT0 (NOMADIK_FSMC_BASE + 0x4c) -#define REG_FSMC_ECCR0 (NOMADIK_FSMC_BASE + 0x54) - -#endif /* __NOMADIK_H__ */ diff --git a/include/vsc9953.h b/include/vsc9953.h index 3d11b87a1f..cd5cfc76b0 100644 --- a/include/vsc9953.h +++ b/include/vsc9953.h @@ -1,14 +1,9 @@ /* - * vsc9953.h + * Copyright 2013, 2015 Freescale Semiconductor, Inc. * - * Driver for the Vitesse VSC9953 L2 Switch - * - * This software may be used and distributed according to the - * terms of the GNU Public License, Version 2, incorporated - * herein by reference. - * - * Copyright 2013 Freescale Semiconductor, Inc. + * SPDX-License-Identifier: GPL-2.0+ * + * Driver for the Vitesse VSC9953 L2 Switch */ #ifndef _VSC9953_H_ @@ -17,11 +12,11 @@ #include <config.h> #include <miiphy.h> #include <asm/types.h> -#include <malloc.h> #define VSC9953_OFFSET (CONFIG_SYS_CCSRBAR_DEFAULT + 0x800000) #define VSC9953_SYS_OFFSET 0x010000 +#define VSC9953_REW_OFFSET 0x030000 #define VSC9953_DEV_GMII_OFFSET 0x100000 #define VSC9953_QSYS_OFFSET 0x200000 #define VSC9953_ANA_OFFSET 0x280000 @@ -33,29 +28,131 @@ #define T1040_SWITCH_GMII_DEV_OFFSET 0x010000 #define VSC9953_PHY_REGS_OFFST 0x0000AC -#define CONFIG_VSC9953_SOFT_SWC_RST_ENA 0x00000001 -#define CONFIG_VSC9953_CORE_ENABLE 0x80 -#define CONFIG_VSC9953_MEM_ENABLE 0x40 -#define CONFIG_VSC9953_MEM_INIT 0x20 - -#define CONFIG_VSC9953_PORT_ENA 0x00003a00 -#define CONFIG_VSC9953_MAC_ENA_CFG 0x00000011 -#define CONFIG_VSC9953_MAC_MODE_CFG 0x00000011 -#define CONFIG_VSC9953_MAC_IFG_CFG 0x00000515 -#define CONFIG_VSC9953_MAC_HDX_CFG 0x00001043 -#define CONFIG_VSC9953_CLOCK_CFG 0x00000001 -#define CONFIG_VSC9953_CLOCK_CFG_1000M 0x00000001 -#define CONFIG_VSC9953_PFC_FC 0x00000001 -#define CONFIG_VSC9953_PFC_FC_QSGMII 0x00000000 -#define CONFIG_VSC9953_MAC_FC_CFG 0x04700000 -#define CONFIG_VSC9953_MAC_FC_CFG_QSGMII 0x00700000 -#define CONFIG_VSC9953_PAUSE_CFG 0x001ffffe -#define CONFIG_VSC9953_TOT_TAIL_DROP_LVL 0x000003ff -#define CONFIG_VSC9953_FRONT_PORT_MODE 0x00000000 -#define CONFIG_VSC9953_MAC_MAX_LEN 0x000005ee - -#define CONFIG_VSC9953_VCAP_MV_CFG 0x0000ffff -#define CONFIG_VSC9953_VCAP_UPDATE_CTRL 0x01000004 +/* Macros for vsc9953_chip_regs.soft_rst register */ +#define VSC9953_SOFT_SWC_RST_ENA 0x00000001 + +/* Macros for vsc9953_sys_sys.reset_cfg register */ +#define VSC9953_CORE_ENABLE 0x80 +#define VSC9953_MEM_ENABLE 0x40 +#define VSC9953_MEM_INIT 0x20 + +/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_ena_cfg register */ +#define VSC9953_MAC_ENA_CFG 0x00000011 + +/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_mode_cfg register */ +#define VSC9953_MAC_MODE_CFG 0x00000011 + +/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_ifg_cfg register */ +#define VSC9953_MAC_IFG_CFG 0x00000515 + +/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_hdx_cfg register */ +#define VSC9953_MAC_HDX_CFG 0x00001043 + +/* Macros for vsc9953_dev_gmii_mac_cfg_status.mac_maxlen_cfg register */ +#define VSC9953_MAC_MAX_LEN 0x000005ee + +/* Macros for vsc9953_dev_gmii_port_mode.clock_cfg register */ +#define VSC9953_CLOCK_CFG 0x00000001 +#define VSC9953_CLOCK_CFG_1000M 0x00000001 + +/* Macros for vsc9953_sys_sys.front_port_mode register */ +#define VSC9953_FRONT_PORT_MODE 0x00000000 + +/* Macros for vsc9953_ana_pfc.pfc_cfg register */ +#define VSC9953_PFC_FC 0x00000001 +#define VSC9953_PFC_FC_QSGMII 0x00000000 + +/* Macros for vsc9953_sys_pause_cfg.mac_fc_cfg register */ +#define VSC9953_MAC_FC_CFG 0x04700000 +#define VSC9953_MAC_FC_CFG_QSGMII 0x00700000 + +/* Macros for vsc9953_sys_pause_cfg.pause_cfg register */ +#define VSC9953_PAUSE_CFG 0x001ffffe + +/* Macros for vsc9953_sys_pause_cfgtot_tail_drop_lvl register */ +#define VSC9953_TOT_TAIL_DROP_LVL 0x000003ff + +/* Macros for vsc9953_sys_sys.stat_cfg register */ +#define VSC9953_STAT_CLEAR_RX 0x00000400 +#define VSC9953_STAT_CLEAR_TX 0x00000800 +#define VSC9953_STAT_CLEAR_DR 0x00001000 + +/* Macros for vsc9953_vcap_core_cfg.vcap_mv_cfg register */ +#define VSC9953_VCAP_MV_CFG 0x0000ffff +#define VSC9953_VCAP_UPDATE_CTRL 0x01000004 + +/* Macros for register vsc9953_ana_ana_tables.mac_access register */ +#define VSC9953_MAC_CMD_IDLE 0x00000000 +#define VSC9953_MAC_CMD_LEARN 0x00000001 +#define VSC9953_MAC_CMD_FORGET 0x00000002 +#define VSC9953_MAC_CMD_AGE 0x00000003 +#define VSC9953_MAC_CMD_NEXT 0x00000004 +#define VSC9953_MAC_CMD_READ 0x00000006 +#define VSC9953_MAC_CMD_WRITE 0x00000007 +#define VSC9953_MAC_CMD_MASK 0x00000007 +#define VSC9953_MAC_CMD_VALID 0x00000800 +#define VSC9953_MAC_ENTRYTYPE_NORMAL 0x00000000 +#define VSC9953_MAC_ENTRYTYPE_LOCKED 0x00000200 +#define VSC9953_MAC_ENTRYTYPE_IPV4MCAST 0x00000400 +#define VSC9953_MAC_ENTRYTYPE_IPV6MCAST 0x00000600 +#define VSC9953_MAC_ENTRYTYPE_MASK 0x00000600 +#define VSC9953_MAC_DESTIDX_MASK 0x000001f8 +#define VSC9953_MAC_VID_MASK 0x1fff0000 +#define VSC9953_MAC_MACH_MASK 0x0000ffff + +/* Macros for vsc9953_ana_port.vlan_cfg register */ +#define VSC9953_VLAN_CFG_AWARE_ENA 0x00100000 +#define VSC9953_VLAN_CFG_POP_CNT_MASK 0x000c0000 +#define VSC9953_VLAN_CFG_POP_CNT_NONE 0x00000000 +#define VSC9953_VLAN_CFG_POP_CNT_ONE 0x00040000 +#define VSC9953_VLAN_CFG_VID_MASK 0x00000fff + +/* Macros for vsc9953_rew_port.port_vlan_cfg register */ +#define VSC9953_PORT_VLAN_CFG_VID_MASK 0x00000fff + +/* Macros for vsc9953_ana_ana_tables.vlan_tidx register */ +#define VSC9953_ANA_TBL_VID_MASK 0x00000fff + +/* Macros for vsc9953_ana_ana_tables.vlan_access register */ +#define VSC9953_VLAN_PORT_MASK 0x00001ffc +#define VSC9953_VLAN_CMD_MASK 0x00000003 +#define VSC9953_VLAN_CMD_IDLE 0x00000000 +#define VSC9953_VLAN_CMD_READ 0x00000001 +#define VSC9953_VLAN_CMD_WRITE 0x00000002 +#define VSC9953_VLAN_CMD_INIT 0x00000003 + +/* Macros for vsc9953_ana_port.port_cfg register */ +#define VSC9953_PORT_CFG_LEARN_ENA 0x00000080 +#define VSC9953_PORT_CFG_LEARN_AUTO 0x00000100 +#define VSC9953_PORT_CFG_LEARN_CPU 0x00000200 +#define VSC9953_PORT_CFG_LEARN_DROP 0x00000400 + +/* Macros for vsc9953_qsys_sys.switch_port_mode register */ +#define VSC9953_PORT_ENA 0x00002000 + +/* Macros for vsc9953_ana_ana.agen_ctrl register */ +#define VSC9953_FID_MASK_ALL 0x00fff000 + +/* Macros for vsc9953_ana_ana.adv_learn register */ +#define VSC9953_VLAN_CHK 0x00000400 + +/* Macros for vsc9953_rew_port.port_tag_cfg register */ +#define VSC9953_TAG_CFG_MASK 0x00000180 +#define VSC9953_TAG_CFG_NONE 0x00000000 +#define VSC9953_TAG_CFG_ALL_BUT_PVID_ZERO 0x00000080 +#define VSC9953_TAG_CFG_ALL_BUT_ZERO 0x00000100 +#define VSC9953_TAG_CFG_ALL 0x00000180 +#define VSC9953_TAG_VID_PVID 0x00000010 + +/* Macros for vsc9953_ana_ana.anag_efil register */ +#define VSC9953_AGE_PORT_EN 0x00080000 +#define VSC9953_AGE_PORT_MASK 0x0007c000 +#define VSC9953_AGE_VID_EN 0x00002000 +#define VSC9953_AGE_VID_MASK 0x00001fff + +/* Macros for vsc9953_ana_ana_tables.mach_data register */ +#define VSC9953_MACHDATA_VID_MASK 0x1fff0000 + #define VSC9953_MAX_PORTS 10 #define VSC9953_PORT_CHECK(port) \ (((port) < 0 || (port) >= VSC9953_MAX_PORTS) ? 0 : 1) @@ -64,6 +161,9 @@ (port) < VSC9953_MAX_PORTS - 2 || (port) >= VSC9953_MAX_PORTS \ ) ? 0 : 1 \ ) +#define VSC9953_MAX_VLAN 4096 +#define VSC9953_VLAN_CHECK(vid) \ + (((vid) < 0 || (vid) >= VSC9953_MAX_VLAN) ? 0 : 1) #define DEFAULT_VSC9953_MDIO_NAME "VSC9953_MDIO0" @@ -74,9 +174,9 @@ struct vsc9953_mdio_info { char *name; }; -/* VSC9953 ANA structure for T1040 U-boot*/ +/* VSC9953 ANA structure */ -struct vsc9953_ana_port { +struct vsc9953_ana_port { u32 vlan_cfg; u32 drop_cfg; u32 qos_cfg; @@ -116,6 +216,7 @@ struct vsc9953_ana_ana_tables { struct vsc9953_ana_ana { u32 adv_learn; u32 vlan_mask; + u32 reserved; u32 anag_efil; u32 an_events; u32 storm_limit_burst; @@ -138,7 +239,7 @@ struct vsc9953_ana_pgid { u32 port_grp_id[91]; }; -struct vsc9953_ana_pfc { +struct vsc9953_ana_pfc { u32 pfc_cfg; u32 reserved1[15]; }; @@ -149,7 +250,7 @@ struct vsc9953_ana_pol_misc { u32 pol_hyst; }; -struct vsc9953_ana_common { +struct vsc9953_ana_common { u32 aggr_cfg; u32 cpuq_cfg; u32 cpuq_8021_cfg; @@ -176,18 +277,18 @@ struct vsc9953_analyzer { u32 reserved5[196]; struct vsc9953_ana_common common; }; -/* END VSC9953 ANA structure for T1040 U-boot*/ +/* END VSC9953 ANA structure t*/ -/* VSC9953 DEV_GMII structure for T1040 U-boot*/ +/* VSC9953 DEV_GMII structure */ -struct vsc9953_dev_gmii_port_mode { +struct vsc9953_dev_gmii_port_mode { u32 clock_cfg; u32 port_misc; u32 reserved1; u32 eee_cfg; }; -struct vsc9953_dev_gmii_mac_cfg_status { +struct vsc9953_dev_gmii_mac_cfg_status { u32 mac_ena_cfg; u32 mac_mode_cfg; u32 mac_maxlen_cfg; @@ -205,11 +306,11 @@ struct vsc9953_dev_gmii { struct vsc9953_dev_gmii_mac_cfg_status mac_cfg_status; }; -/* END VSC9953 DEV_GMII structure for T1040 U-boot*/ +/* END VSC9953 DEV_GMII structure */ -/* VSC9953 QSYS structure for T1040 U-boot*/ +/* VSC9953 QSYS structure */ -struct vsc9953_qsys_hsch { +struct vsc9953_qsys_hsch { u32 cir_cfg; u32 reserved1; u32 se_cfg; @@ -218,7 +319,7 @@ struct vsc9953_qsys_hsch { u32 reserved2[20]; }; -struct vsc9953_qsys_sys { +struct vsc9953_qsys_sys { u32 port_mode[12]; u32 switch_port_mode[11]; u32 stat_cnt_cfg; @@ -232,32 +333,32 @@ struct vsc9953_qsys_sys { u32 reserved1[23]; }; -struct vsc9953_qsys_qos_cfg { +struct vsc9953_qsys_qos_cfg { u32 red_profile[16]; u32 res_qos_mode; }; -struct vsc9953_qsys_drop_cfg { +struct vsc9953_qsys_drop_cfg { u32 egr_drop_mode; }; -struct vsc9953_qsys_mmgt { +struct vsc9953_qsys_mmgt { u32 eq_cntrl; u32 reserved1; }; -struct vsc9953_qsys_hsch_misc { +struct vsc9953_qsys_hsch_misc { u32 hsch_misc_cfg; u32 reserved1[546]; }; -struct vsc9953_qsys_res_ctrl { +struct vsc9953_qsys_res_ctrl { u32 res_cfg; u32 res_stat; }; -struct vsc9953_qsys_reg { +struct vsc9953_qsys_reg { struct vsc9953_qsys_hsch hsch[108]; struct vsc9953_qsys_sys sys; struct vsc9953_qsys_qos_cfg qos_cfg; @@ -267,18 +368,123 @@ struct vsc9953_qsys_reg { struct vsc9953_qsys_res_ctrl res_ctrl[1024]; }; -/* END VSC9953 QSYS structure for T1040 U-boot*/ - -/* VSC9953 SYS structure for T1040 U-boot*/ - -struct vsc9953_sys_stat { - u32 rx_cntrs[64]; - u32 tx_cntrs[64]; - u32 drop_cntrs[64]; +/* END VSC9953 QSYS structure */ + +/* VSC9953 SYS structure */ + +struct vsc9953_rx_cntrs { + u32 c_rx_oct; + u32 c_rx_uc; + u32 c_rx_mc; + u32 c_rx_bc; + u32 c_rx_short; + u32 c_rx_frag; + u32 c_rx_jabber; + u32 c_rx_crc; + u32 c_rx_symbol_err; + u32 c_rx_sz_64; + u32 c_rx_sz_65_127; + u32 c_rx_sz_128_255; + u32 c_rx_sz_256_511; + u32 c_rx_sz_512_1023; + u32 c_rx_sz_1024_1526; + u32 c_rx_sz_jumbo; + u32 c_rx_pause; + u32 c_rx_control; + u32 c_rx_long; + u32 c_rx_cat_drop; + u32 c_rx_red_prio_0; + u32 c_rx_red_prio_1; + u32 c_rx_red_prio_2; + u32 c_rx_red_prio_3; + u32 c_rx_red_prio_4; + u32 c_rx_red_prio_5; + u32 c_rx_red_prio_6; + u32 c_rx_red_prio_7; + u32 c_rx_yellow_prio_0; + u32 c_rx_yellow_prio_1; + u32 c_rx_yellow_prio_2; + u32 c_rx_yellow_prio_3; + u32 c_rx_yellow_prio_4; + u32 c_rx_yellow_prio_5; + u32 c_rx_yellow_prio_6; + u32 c_rx_yellow_prio_7; + u32 c_rx_green_prio_0; + u32 c_rx_green_prio_1; + u32 c_rx_green_prio_2; + u32 c_rx_green_prio_3; + u32 c_rx_green_prio_4; + u32 c_rx_green_prio_5; + u32 c_rx_green_prio_6; + u32 c_rx_green_prio_7; + u32 reserved[20]; +}; + +struct vsc9953_tx_cntrs { + u32 c_tx_oct; + u32 c_tx_uc; + u32 c_tx_mc; + u32 c_tx_bc; + u32 c_tx_col; + u32 c_tx_drop; + u32 c_tx_pause; + u32 c_tx_sz_64; + u32 c_tx_sz_65_127; + u32 c_tx_sz_128_255; + u32 c_tx_sz_256_511; + u32 c_tx_sz_512_1023; + u32 c_tx_sz_1024_1526; + u32 c_tx_sz_jumbo; + u32 c_tx_yellow_prio_0; + u32 c_tx_yellow_prio_1; + u32 c_tx_yellow_prio_2; + u32 c_tx_yellow_prio_3; + u32 c_tx_yellow_prio_4; + u32 c_tx_yellow_prio_5; + u32 c_tx_yellow_prio_6; + u32 c_tx_yellow_prio_7; + u32 c_tx_green_prio_0; + u32 c_tx_green_prio_1; + u32 c_tx_green_prio_2; + u32 c_tx_green_prio_3; + u32 c_tx_green_prio_4; + u32 c_tx_green_prio_5; + u32 c_tx_green_prio_6; + u32 c_tx_green_prio_7; + u32 c_tx_aged; + u32 reserved[33]; +}; + +struct vsc9953_drop_cntrs { + u32 c_dr_local; + u32 c_dr_tail; + u32 c_dr_yellow_prio_0; + u32 c_dr_yellow_prio_1; + u32 c_dr_yellow_prio_2; + u32 c_dr_yellow_prio_3; + u32 c_dr_yellow_prio_4; + u32 c_dr_yellow_prio_5; + u32 c_dr_yellow_prio_6; + u32 c_dr_yellow_prio_7; + u32 c_dr_green_prio_0; + u32 c_dr_green_prio_1; + u32 c_dr_green_prio_2; + u32 c_dr_green_prio_3; + u32 c_dr_green_prio_4; + u32 c_dr_green_prio_5; + u32 c_dr_green_prio_6; + u32 c_dr_green_prio_7; + u32 reserved[46]; +}; + +struct vsc9953_sys_stat { + struct vsc9953_rx_cntrs rx_cntrs; + struct vsc9953_tx_cntrs tx_cntrs; + struct vsc9953_drop_cntrs drop_cntrs; u32 reserved1[6]; }; -struct vsc9953_sys_sys { +struct vsc9953_sys_sys { u32 reset_cfg; u32 reserved1; u32 vlan_etype_cfg; @@ -289,7 +495,7 @@ struct vsc9953_sys_sys { u32 reserved2[50]; }; -struct vsc9953_sys_pause_cfg { +struct vsc9953_sys_pause_cfg { u32 pause_cfg[11]; u32 pause_tot_cfg; u32 tail_drop_level[11]; @@ -297,29 +503,52 @@ struct vsc9953_sys_pause_cfg { u32 mac_fc_cfg[10]; }; -struct vsc9953_sys_mmgt { +struct vsc9953_sys_mmgt { u16 free_cnt; }; -struct vsc9953_system_reg { +struct vsc9953_system_reg { struct vsc9953_sys_stat stat; struct vsc9953_sys_sys sys; struct vsc9953_sys_pause_cfg pause_cfg; struct vsc9953_sys_mmgt mmgt; }; -/* END VSC9953 SYS structure for T1040 U-boot*/ +/* END VSC9953 SYS structure */ + +/* VSC9953 REW structure */ + +struct vsc9953_rew_port { + u32 port_vlan_cfg; + u32 port_tag_cfg; + u32 port_port_cfg; + u32 port_dscp_cfg; + u32 port_pcp_dei_qos_map_cfg[16]; + u32 reserved[12]; +}; + +struct vsc9953_rew_common { + u32 reserve[4]; + u32 dscp_remap_dp1_cfg[64]; + u32 dscp_remap_cfg[64]; +}; + +struct vsc9953_rew_reg { + struct vsc9953_rew_port port[12]; + struct vsc9953_rew_common common; +}; +/* END VSC9953 REW structure */ -/* VSC9953 DEVCPU_GCB structure for T1040 U-boot*/ +/* VSC9953 DEVCPU_GCB structure */ -struct vsc9953_chip_regs { +struct vsc9953_chip_regs { u32 chipd_id; u32 gpr; u32 soft_rst; }; -struct vsc9953_gpio { +struct vsc9953_gpio { u32 gpio_out_set[10]; u32 gpio_out_clr[10]; u32 gpio_out[10]; @@ -338,31 +567,31 @@ struct vsc9953_mii_mng { u32 miiscan_lst_rslts_valid; }; -struct vsc9953_mii_read_scan { +struct vsc9953_mii_read_scan { u32 mii_scan_results_sticky[2]; }; -struct vsc9953_devcpu_gcb { +struct vsc9953_devcpu_gcb { struct vsc9953_chip_regs chip_regs; struct vsc9953_gpio gpio; struct vsc9953_mii_mng mii_mng[2]; struct vsc9953_mii_read_scan mii_read_scan; }; -/* END VSC9953 DEVCPU_GCB structure for T1040 U-boot*/ +/* END VSC9953 DEVCPU_GCB structure */ -/* VSC9953 IS* structure for T1040 U-boot*/ +/* VSC9953 IS* structure */ -struct vsc9953_vcap_core_cfg { +struct vsc9953_vcap_core_cfg { u32 vcap_update_ctrl; u32 vcap_mv_cfg; }; -struct vsc9953_vcap { -struct vsc9953_vcap_core_cfg vcap_core_cfg; +struct vsc9953_vcap { + struct vsc9953_vcap_core_cfg vcap_core_cfg; }; -/* END VSC9953 IS* structure for T1040 U-boot*/ +/* END VSC9953 IS* structure */ #define VSC9953_PORT_INFO_INITIALIZER(idx) \ { \ @@ -388,15 +617,15 @@ struct vsc9953_port_info { /* Structure to describe a VSC9953 switch */ struct vsc9953_info { - struct vsc9953_port_info port[VSC9953_MAX_PORTS]; + struct vsc9953_port_info port[VSC9953_MAX_PORTS]; }; void vsc9953_init(bd_t *bis); -void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus); -void vsc9953_port_info_set_phy_address(int port, int address); -void vsc9953_port_enable(int port); -void vsc9953_port_disable(int port); -void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int); +void vsc9953_port_info_set_mdio(int port_no, struct mii_dev *bus); +void vsc9953_port_info_set_phy_address(int port_no, int address); +void vsc9953_port_enable(int port_no); +void vsc9953_port_disable(int port_no); +void vsc9953_port_info_set_phy_int(int port_no, phy_interface_t phy_int); #endif /* _VSC9953_H_ */ diff --git a/lib/Kconfig b/lib/Kconfig index 067307276e..a8f8460d1d 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -100,6 +100,24 @@ config SHA_PROG_HW_ACCEL is performed in hardware. endmenu +menu "Compression Support" + +config LZ4 + bool "Enable LZ4 decompression support" + help + If this option is set, support for LZ4 compressed images + is included. The LZ4 algorithm can run in-place as long as the + compressed image is loaded to the end of the output buffer, and + trades lower compression ratios for much faster decompression. + + NOTE: This implements the release version of the LZ4 frame + format as generated by default by the 'lz4' command line tool. + This is not the same as the outdated, less efficient legacy + frame format currently (2015) implemented in the Linux kernel + (generated by 'lz4 -l'). The two formats are incompatible. + +endmenu + config ERRNO_STR bool "Enable function for getting errno-related string message" help diff --git a/lib/Makefile b/lib/Makefile index 96f832edd2..3eecefaa79 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_GZIP_COMPRESSED) += gzip.o obj-y += initcall.o obj-$(CONFIG_LMB) += lmb.o obj-y += ldiv.o +obj-$(CONFIG_LZ4) += lz4_wrapper.o obj-$(CONFIG_MD5) += md5.o obj-y += net_utils.o obj-$(CONFIG_PHYSMEM) += physmem.o diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 5770094fbf..1a86369934 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -86,32 +86,105 @@ const char *fdtdec_get_compatible(enum fdt_compat_id id) return compat_names[id]; } -fdt_addr_t fdtdec_get_addr_size(const void *blob, int node, - const char *prop_name, fdt_size_t *sizep) +fdt_addr_t fdtdec_get_addr_size_fixed(const void *blob, int node, + const char *prop_name, int index, int na, int ns, + fdt_size_t *sizep) { - const fdt_addr_t *cell; + const fdt32_t *prop, *prop_end; + const fdt32_t *prop_addr, *prop_size, *prop_after_size; int len; + fdt_addr_t addr; debug("%s: %s: ", __func__, prop_name); - cell = fdt_getprop(blob, node, prop_name, &len); - if (cell && ((!sizep && len == sizeof(fdt_addr_t)) || - len == sizeof(fdt_addr_t) * 2)) { - fdt_addr_t addr = fdt_addr_to_cpu(*cell); - if (sizep) { - const fdt_size_t *size; - - size = (fdt_size_t *)((char *)cell + - sizeof(fdt_addr_t)); - *sizep = fdt_size_to_cpu(*size); - debug("addr=%08lx, size=%llx\n", - (ulong)addr, (u64)*sizep); - } else { - debug("%08lx\n", (ulong)addr); - } - return addr; + + if (na > (sizeof(fdt_addr_t) / sizeof(fdt32_t))) { + debug("(na too large for fdt_addr_t type)\n"); + return FDT_ADDR_T_NONE; } - debug("(not found)\n"); - return FDT_ADDR_T_NONE; + + if (ns > (sizeof(fdt_size_t) / sizeof(fdt32_t))) { + debug("(ns too large for fdt_size_t type)\n"); + return FDT_ADDR_T_NONE; + } + + prop = fdt_getprop(blob, node, prop_name, &len); + if (!prop) { + debug("(not found)\n"); + return FDT_ADDR_T_NONE; + } + prop_end = prop + (len / sizeof(*prop)); + + prop_addr = prop + (index * (na + ns)); + prop_size = prop_addr + na; + prop_after_size = prop_size + ns; + if (prop_after_size > prop_end) { + debug("(not enough data: expected >= %d cells, got %d cells)\n", + (u32)(prop_after_size - prop), ((u32)(prop_end - prop))); + return FDT_ADDR_T_NONE; + } + + addr = fdtdec_get_number(prop_addr, na); + + if (sizep) { + *sizep = fdtdec_get_number(prop_size, ns); + debug("addr=%08llx, size=%llx\n", (u64)addr, (u64)*sizep); + } else { + debug("addr=%08llx\n", (u64)addr); + } + + return addr; +} + +fdt_addr_t fdtdec_get_addr_size_auto_parent(const void *blob, int parent, + int node, const char *prop_name, int index, fdt_size_t *sizep) +{ + int na, ns; + + debug("%s: ", __func__); + + na = fdt_address_cells(blob, parent); + if (na < 1) { + debug("(bad #address-cells)\n"); + return FDT_ADDR_T_NONE; + } + + ns = fdt_size_cells(blob, parent); + if (ns < 0) { + debug("(bad #size-cells)\n"); + return FDT_ADDR_T_NONE; + } + + debug("na=%d, ns=%d, ", na, ns); + + return fdtdec_get_addr_size_fixed(blob, node, prop_name, index, na, + ns, sizep); +} + +fdt_addr_t fdtdec_get_addr_size_auto_noparent(const void *blob, int node, + const char *prop_name, int index, fdt_size_t *sizep) +{ + int parent; + + debug("%s: ", __func__); + + parent = fdt_parent_offset(blob, node); + if (parent < 0) { + debug("(no parent found)\n"); + return FDT_ADDR_T_NONE; + } + + return fdtdec_get_addr_size_auto_parent(blob, parent, node, prop_name, + index, sizep); +} + +fdt_addr_t fdtdec_get_addr_size(const void *blob, int node, + const char *prop_name, fdt_size_t *sizep) +{ + int ns = sizep ? (sizeof(fdt_size_t) / sizeof(fdt32_t)) : 0; + + return fdtdec_get_addr_size_fixed(blob, node, prop_name, 0, + sizeof(fdt_addr_t) / sizeof(fdt32_t), + ns, sizep); } fdt_addr_t fdtdec_get_addr(const void *blob, int node, diff --git a/lib/gzip.c b/lib/gzip.c index cd8e9fea43..2c49e4e9ff 100644 --- a/lib/gzip.c +++ b/lib/gzip.c @@ -10,6 +10,7 @@ #include <command.h> #include <image.h> #include <malloc.h> +#include <memalign.h> #include <u-boot/zlib.h> #include "zlib/zutil.h" diff --git a/lib/hashtable.c b/lib/hashtable.c index 18ed5901ec..02b41050a4 100644 --- a/lib/hashtable.c +++ b/lib/hashtable.c @@ -789,12 +789,13 @@ int himport_r(struct hsearch_data *htab, } /* we allocate new space to make sure we can write to the array */ - if ((data = malloc(size)) == NULL) { - debug("himport_r: can't malloc %zu bytes\n", size); + if ((data = malloc(size + 1)) == NULL) { + debug("himport_r: can't malloc %zu bytes\n", size + 1); __set_errno(ENOMEM); return 0; } memcpy(data, env, size); + data[size] = '\0'; dp = data; /* make a local copy of the list of variables */ @@ -841,8 +842,10 @@ int himport_r(struct hsearch_data *htab, } } - if(!size) + if (!size) { + free(data); return 1; /* everything OK */ + } if(crlf_is_lf) { /* Remove Carriage Returns in front of Line Feeds */ unsigned ignored_crs = 0; @@ -906,6 +909,7 @@ int himport_r(struct hsearch_data *htab, if (*name == 0) { debug("INSERT: unable to use an empty key\n"); __set_errno(EINVAL); + free(data); return 0; } diff --git a/lib/lz4.c b/lib/lz4.c new file mode 100644 index 0000000000..f518341af5 --- /dev/null +++ b/lib/lz4.c @@ -0,0 +1,243 @@ +/* + LZ4 - Fast LZ compression algorithm + Copyright (C) 2011-2015, Yann Collet. + + SPDX-License-Identifier: BSD-2-Clause + + You can contact the author at : + - LZ4 source repository : https://github.com/Cyan4973/lz4 + - LZ4 public forum : https://groups.google.com/forum/#!forum/lz4c +*/ + + +/************************************** +* Reading and writing into memory +**************************************/ + +/* customized version of memcpy, which may overwrite up to 7 bytes beyond dstEnd */ +static void LZ4_wildCopy(void* dstPtr, const void* srcPtr, void* dstEnd) +{ + BYTE* d = (BYTE*)dstPtr; + const BYTE* s = (const BYTE*)srcPtr; + BYTE* e = (BYTE*)dstEnd; + do { LZ4_copy8(d,s); d+=8; s+=8; } while (d<e); +} + + +/************************************** +* Common Constants +**************************************/ +#define MINMATCH 4 + +#define COPYLENGTH 8 +#define LASTLITERALS 5 +#define MFLIMIT (COPYLENGTH+MINMATCH) +static const int LZ4_minLength = (MFLIMIT+1); + +#define KB *(1 <<10) +#define MB *(1 <<20) +#define GB *(1U<<30) + +#define MAXD_LOG 16 +#define MAX_DISTANCE ((1 << MAXD_LOG) - 1) + +#define ML_BITS 4 +#define ML_MASK ((1U<<ML_BITS)-1) +#define RUN_BITS (8-ML_BITS) +#define RUN_MASK ((1U<<RUN_BITS)-1) + + +/************************************** +* Local Structures and types +**************************************/ +typedef enum { noDict = 0, withPrefix64k, usingExtDict } dict_directive; +typedef enum { endOnOutputSize = 0, endOnInputSize = 1 } endCondition_directive; +typedef enum { full = 0, partial = 1 } earlyEnd_directive; + + + +/******************************* +* Decompression functions +*******************************/ +/* + * This generic decompression function cover all use cases. + * It shall be instantiated several times, using different sets of directives + * Note that it is essential this generic function is really inlined, + * in order to remove useless branches during compilation optimization. + */ +FORCE_INLINE int LZ4_decompress_generic( + const char* const source, + char* const dest, + int inputSize, + int outputSize, /* If endOnInput==endOnInputSize, this value is the max size of Output Buffer. */ + + int endOnInput, /* endOnOutputSize, endOnInputSize */ + int partialDecoding, /* full, partial */ + int targetOutputSize, /* only used if partialDecoding==partial */ + int dict, /* noDict, withPrefix64k, usingExtDict */ + const BYTE* const lowPrefix, /* == dest if dict == noDict */ + const BYTE* const dictStart, /* only if dict==usingExtDict */ + const size_t dictSize /* note : = 0 if noDict */ + ) +{ + /* Local Variables */ + const BYTE* ip = (const BYTE*) source; + const BYTE* const iend = ip + inputSize; + + BYTE* op = (BYTE*) dest; + BYTE* const oend = op + outputSize; + BYTE* cpy; + BYTE* oexit = op + targetOutputSize; + const BYTE* const lowLimit = lowPrefix - dictSize; + + const BYTE* const dictEnd = (const BYTE*)dictStart + dictSize; + const size_t dec32table[] = {4, 1, 2, 1, 4, 4, 4, 4}; + const size_t dec64table[] = {0, 0, 0, (size_t)-1, 0, 1, 2, 3}; + + const int safeDecode = (endOnInput==endOnInputSize); + const int checkOffset = ((safeDecode) && (dictSize < (int)(64 KB))); + + + /* Special cases */ + if ((partialDecoding) && (oexit> oend-MFLIMIT)) oexit = oend-MFLIMIT; /* targetOutputSize too high => decode everything */ + if ((endOnInput) && (unlikely(outputSize==0))) return ((inputSize==1) && (*ip==0)) ? 0 : -1; /* Empty output buffer */ + if ((!endOnInput) && (unlikely(outputSize==0))) return (*ip==0?1:-1); + + + /* Main Loop */ + while (1) + { + unsigned token; + size_t length; + const BYTE* match; + + /* get literal length */ + token = *ip++; + if ((length=(token>>ML_BITS)) == RUN_MASK) + { + unsigned s; + do + { + s = *ip++; + length += s; + } + while (likely((endOnInput)?ip<iend-RUN_MASK:1) && (s==255)); + if ((safeDecode) && unlikely((size_t)(op+length)<(size_t)(op))) goto _output_error; /* overflow detection */ + if ((safeDecode) && unlikely((size_t)(ip+length)<(size_t)(ip))) goto _output_error; /* overflow detection */ + } + + /* copy literals */ + cpy = op+length; + if (((endOnInput) && ((cpy>(partialDecoding?oexit:oend-MFLIMIT)) || (ip+length>iend-(2+1+LASTLITERALS))) ) + || ((!endOnInput) && (cpy>oend-COPYLENGTH))) + { + if (partialDecoding) + { + if (cpy > oend) goto _output_error; /* Error : write attempt beyond end of output buffer */ + if ((endOnInput) && (ip+length > iend)) goto _output_error; /* Error : read attempt beyond end of input buffer */ + } + else + { + if ((!endOnInput) && (cpy != oend)) goto _output_error; /* Error : block decoding must stop exactly there */ + if ((endOnInput) && ((ip+length != iend) || (cpy > oend))) goto _output_error; /* Error : input must be consumed */ + } + memcpy(op, ip, length); + ip += length; + op += length; + break; /* Necessarily EOF, due to parsing restrictions */ + } + LZ4_wildCopy(op, ip, cpy); + ip += length; op = cpy; + + /* get offset */ + match = cpy - LZ4_readLE16(ip); ip+=2; + if ((checkOffset) && (unlikely(match < lowLimit))) goto _output_error; /* Error : offset outside destination buffer */ + + /* get matchlength */ + length = token & ML_MASK; + if (length == ML_MASK) + { + unsigned s; + do + { + if ((endOnInput) && (ip > iend-LASTLITERALS)) goto _output_error; + s = *ip++; + length += s; + } while (s==255); + if ((safeDecode) && unlikely((size_t)(op+length)<(size_t)op)) goto _output_error; /* overflow detection */ + } + length += MINMATCH; + + /* check external dictionary */ + if ((dict==usingExtDict) && (match < lowPrefix)) + { + if (unlikely(op+length > oend-LASTLITERALS)) goto _output_error; /* doesn't respect parsing restriction */ + + if (length <= (size_t)(lowPrefix-match)) + { + /* match can be copied as a single segment from external dictionary */ + match = dictEnd - (lowPrefix-match); + memmove(op, match, length); op += length; + } + else + { + /* match encompass external dictionary and current segment */ + size_t copySize = (size_t)(lowPrefix-match); + memcpy(op, dictEnd - copySize, copySize); + op += copySize; + copySize = length - copySize; + if (copySize > (size_t)(op-lowPrefix)) /* overlap within current segment */ + { + BYTE* const endOfMatch = op + copySize; + const BYTE* copyFrom = lowPrefix; + while (op < endOfMatch) *op++ = *copyFrom++; + } + else + { + memcpy(op, lowPrefix, copySize); + op += copySize; + } + } + continue; + } + + /* copy repeated sequence */ + cpy = op + length; + if (unlikely((op-match)<8)) + { + const size_t dec64 = dec64table[op-match]; + op[0] = match[0]; + op[1] = match[1]; + op[2] = match[2]; + op[3] = match[3]; + match += dec32table[op-match]; + LZ4_copy4(op+4, match); + op += 8; match -= dec64; + } else { LZ4_copy8(op, match); op+=8; match+=8; } + + if (unlikely(cpy>oend-12)) + { + if (cpy > oend-LASTLITERALS) goto _output_error; /* Error : last LASTLITERALS bytes must be literals */ + if (op < oend-8) + { + LZ4_wildCopy(op, match, oend-8); + match += (oend-8) - op; + op = oend-8; + } + while (op<cpy) *op++ = *match++; + } + else + LZ4_wildCopy(op, match, cpy); + op=cpy; /* correction */ + } + + /* end of decoding */ + if (endOnInput) + return (int) (((char*)op)-dest); /* Nb of output bytes decoded */ + else + return (int) (((const char*)ip)-source); /* Nb of input bytes read */ + + /* Overflow error detected */ +_output_error: + return (int) (-(((const char*)ip)-source))-1; +} diff --git a/lib/lz4_wrapper.c b/lib/lz4_wrapper.c new file mode 100644 index 0000000000..0739663fca --- /dev/null +++ b/lib/lz4_wrapper.c @@ -0,0 +1,137 @@ +/* + * Copyright 2015 Google Inc. + * + * SPDX-License-Identifier: GPL 2.0+ BSD-3-Clause + */ + +#include <common.h> +#include <compiler.h> +#include <linux/kernel.h> +#include <linux/types.h> + +static u16 LZ4_readLE16(const void *src) { return le16_to_cpu(*(u16 *)src); } +static void LZ4_copy4(void *dst, const void *src) { *(u32 *)dst = *(u32 *)src; } +static void LZ4_copy8(void *dst, const void *src) { *(u64 *)dst = *(u64 *)src; } + +typedef uint8_t BYTE; +typedef uint16_t U16; +typedef uint32_t U32; +typedef int32_t S32; +typedef uint64_t U64; + +#define FORCE_INLINE static inline __attribute__((always_inline)) + +/* Unaltered (except removing unrelated code) from github.com/Cyan4973/lz4. */ +#include "lz4.c" /* #include for inlining, do not link! */ + +#define LZ4F_MAGIC 0x184D2204 + +struct lz4_frame_header { + u32 magic; + union { + u8 flags; + struct { + u8 reserved0:2; + u8 has_content_checksum:1; + u8 has_content_size:1; + u8 has_block_checksum:1; + u8 independent_blocks:1; + u8 version:2; + }; + }; + union { + u8 block_descriptor; + struct { + u8 reserved1:4; + u8 max_block_size:3; + u8 reserved2:1; + }; + }; + /* + u64 content_size iff has_content_size is set */ + /* + u8 header_checksum */ +} __packed; + +struct lz4_block_header { + union { + u32 raw; + struct { + u32 size:31; + u32 not_compressed:1; + }; + }; + /* + size bytes of data */ + /* + u32 block_checksum iff has_block_checksum is set */ +} __packed; + +int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn) +{ + const void *end = dst + *dstn; + const void *in = src; + void *out = dst; + int has_block_checksum; + int ret; + *dstn = 0; + + { /* With in-place decompression the header may become invalid later. */ + const struct lz4_frame_header *h = in; + + if (srcn < sizeof(*h) + sizeof(u64) + sizeof(u8)) + return -EINVAL; /* input overrun */ + + /* We assume there's always only a single, standard frame. */ + if (le32_to_cpu(h->magic) != LZ4F_MAGIC || h->version != 1) + return -EPROTONOSUPPORT; /* unknown format */ + if (h->reserved0 || h->reserved1 || h->reserved2) + return -EINVAL; /* reserved must be zero */ + if (!h->independent_blocks) + return -EPROTONOSUPPORT; /* we can't support this yet */ + has_block_checksum = h->has_block_checksum; + + in += sizeof(*h); + if (h->has_content_size) + in += sizeof(u64); + in += sizeof(u8); + } + + while (1) { + struct lz4_block_header b = { .raw = le32_to_cpu(*(u32 *)in) }; + in += sizeof(struct lz4_block_header); + + if (in - src + b.size > srcn) { + ret = -EINVAL; /* input overrun */ + break; + } + + if (!b.size) { + ret = 0; /* decompression successful */ + break; + } + + if (b.not_compressed) { + size_t size = min((ptrdiff_t)b.size, end - out); + memcpy(out, in, size); + out += size; + if (size < b.size) { + ret = -ENOBUFS; /* output overrun */ + break; + } + } else { + /* constant folding essential, do not touch params! */ + ret = LZ4_decompress_generic(in, out, b.size, + end - out, endOnInputSize, + full, 0, noDict, out, NULL, 0); + if (ret < 0) { + ret = -EPROTO; /* decompression error */ + break; + } + out += ret; + } + + in += b.size; + if (has_block_checksum) + in += sizeof(u32); + } + + *dstn = out - dst; + return ret; +} diff --git a/lib/zlib/zutil.c b/lib/zlib/zutil.c index 173a81d1ea..227343e48d 100644 --- a/lib/zlib/zutil.c +++ b/lib/zlib/zutil.c @@ -43,7 +43,9 @@ void z_error (m) */ #ifndef MY_ZCALLOC /* Any system without a special alloc function */ -#ifndef __UBOOT__ +#ifdef __UBOOT__ +#include <malloc.h> +#else #ifndef STDC extern voidp malloc OF((uInt size)); extern voidp calloc OF((uInt items, uInt size)); diff --git a/net/Kconfig b/net/Kconfig index 915371df91..77a2f7e07e 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -16,4 +16,10 @@ config NET_RANDOM_ETHADDR A new MAC address will be generated on every boot and it will not be added to the environment. +config NETCONSOLE + bool "NetConsole support" + help + Support the 'nc' input/output device for networked console. + See README.NetConsole for details. + endif # if NET @@ -389,6 +389,17 @@ void eth_halt(void) priv->state = ETH_STATE_PASSIVE; } +int eth_is_active(struct udevice *dev) +{ + struct eth_device_priv *priv; + + if (!dev || !device_active(dev)) + return 0; + + priv = dev_get_uclass_priv(dev); + return priv->state == ETH_STATE_ACTIVE; +} + int eth_send(void *packet, int length) { struct udevice *current; @@ -580,7 +591,7 @@ UCLASS_DRIVER(eth) = { .per_device_auto_alloc_size = sizeof(struct eth_device_priv), .flags = DM_UC_FLAG_SEQ_ALIAS, }; -#endif +#endif /* #ifdef CONFIG_DM_ETH */ #ifndef CONFIG_DM_ETH @@ -918,6 +929,11 @@ void eth_halt(void) eth_current->state = ETH_STATE_PASSIVE; } +int eth_is_active(struct eth_device *dev) +{ + return dev && dev->state == ETH_STATE_ACTIVE; +} + int eth_send(void *packet, int length) { if (!eth_current) diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c index 20fed03bea..074234fd5d 100644 --- a/scripts/basic/fixdep.c +++ b/scripts/basic/fixdep.c @@ -193,23 +193,6 @@ static void define_config(const char *name, int len, unsigned int hash) } /* - * Clear the set of configuration strings. - */ -static void clear_config(void) -{ - struct item *aux, *next; - unsigned int i; - - for (i = 0; i < HASHSZ; i++) { - for (aux = hashtab[i]; aux; aux = next) { - next = aux->next; - free(aux); - } - hashtab[i] = NULL; - } -} - -/* * Record the use of a CONFIG_* word. */ static void use_config(const char *m, int slen) @@ -347,8 +330,6 @@ static void parse_dep_file(void *map, size_t len) int saw_any_target = 0; int is_first_dep = 0; - clear_config(); - while (m < end) { /* Skip any "white space" */ while (m < end && (*m == ' ' || *m == '\\' || *m == '\n')) diff --git a/test/compression.c b/test/compression.c index 7ef3a8c9f5..be4e04e6cc 100644 --- a/test/compression.c +++ b/test/compression.c @@ -95,6 +95,28 @@ static const char lzo_compressed[] = "\x73\x61\x67\x65\x73\x2e\x0a\x11\x00\x00\x00\x00\x00\x00"; static const unsigned long lzo_compressed_size = 334; +/* lz4 -z /tmp/plain.txt > /tmp/plain.lz4 */ +static const char lz4_compressed[] = + "\x04\x22\x4d\x18\x64\x70\xb9\x01\x01\x00\x00\xff\x19\x49\x20\x61" + "\x6d\x20\x61\x20\x68\x69\x67\x68\x6c\x79\x20\x63\x6f\x6d\x70\x72" + "\x65\x73\x73\x61\x62\x6c\x65\x20\x62\x69\x74\x20\x6f\x66\x20\x74" + "\x65\x78\x74\x2e\x0a\x28\x00\x3d\xf1\x25\x54\x68\x65\x72\x65\x20" + "\x61\x72\x65\x20\x6d\x61\x6e\x79\x20\x6c\x69\x6b\x65\x20\x6d\x65" + "\x2c\x20\x62\x75\x74\x20\x74\x68\x69\x73\x20\x6f\x6e\x65\x20\x69" + "\x73\x20\x6d\x69\x6e\x65\x2e\x0a\x49\x66\x20\x49\x20\x77\x32\x00" + "\xd1\x6e\x79\x20\x73\x68\x6f\x72\x74\x65\x72\x2c\x20\x74\x45\x00" + "\xf4\x0b\x77\x6f\x75\x6c\x64\x6e\x27\x74\x20\x62\x65\x20\x6d\x75" + "\x63\x68\x20\x73\x65\x6e\x73\x65\x20\x69\x6e\x0a\xcf\x00\x50\x69" + "\x6e\x67\x20\x6d\x12\x00\x00\x32\x00\xf0\x11\x20\x66\x69\x72\x73" + "\x74\x20\x70\x6c\x61\x63\x65\x2e\x20\x41\x74\x20\x6c\x65\x61\x73" + "\x74\x20\x77\x69\x74\x68\x20\x6c\x7a\x6f\x2c\x63\x00\xf5\x14\x77" + "\x61\x79\x2c\x0a\x77\x68\x69\x63\x68\x20\x61\x70\x70\x65\x61\x72" + "\x73\x20\x74\x6f\x20\x62\x65\x68\x61\x76\x65\x20\x70\x6f\x6f\x72" + "\x6c\x79\x4e\x00\x30\x61\x63\x65\x27\x01\x01\x95\x00\x01\x2d\x01" + "\xb0\x0a\x6d\x65\x73\x73\x61\x67\x65\x73\x2e\x0a\x00\x00\x00\x00" + "\x9d\x12\x8c\x9d"; +static const unsigned long lz4_compressed_size = 276; + #define TEST_BUFFER_SIZE 512 @@ -227,6 +249,39 @@ static int uncompress_using_lzo(void *in, unsigned long in_size, return (ret != LZO_E_OK); } +static int compress_using_lz4(void *in, unsigned long in_size, + void *out, unsigned long out_max, + unsigned long *out_size) +{ + /* There is no lz4 compression in u-boot, so fake it. */ + assert(in_size == strlen(plain)); + assert(memcmp(plain, in, in_size) == 0); + + if (lz4_compressed_size > out_max) + return -1; + + memcpy(out, lz4_compressed, lz4_compressed_size); + if (out_size) + *out_size = lz4_compressed_size; + + return 0; +} + +static int uncompress_using_lz4(void *in, unsigned long in_size, + void *out, unsigned long out_max, + unsigned long *out_size) +{ + int ret; + size_t input_size = in_size; + size_t output_size = out_max; + + ret = ulz4fn(in, input_size, out, &output_size); + if (out_size) + *out_size = output_size; + + return (ret != 0); +} + #define errcheck(statement) if (!(statement)) { \ fprintf(stderr, "\tFailed: %s\n", #statement); \ ret = 1; \ @@ -325,6 +380,7 @@ static int do_ut_compression(cmd_tbl_t *cmdtp, int flag, int argc, err += run_test("bzip2", compress_using_bzip2, uncompress_using_bzip2); err += run_test("lzma", compress_using_lzma, uncompress_using_lzma); err += run_test("lzo", compress_using_lzo, uncompress_using_lzo); + err += run_test("lz4", compress_using_lz4, uncompress_using_lz4); printf("ut_compression %s\n", err == 0 ? "ok" : "FAILED"); @@ -401,6 +457,7 @@ static int do_ut_image_decomp(cmd_tbl_t *cmdtp, int flag, int argc, err |= run_bootm_test(IH_COMP_BZIP2, compress_using_bzip2); err |= run_bootm_test(IH_COMP_LZMA, compress_using_lzma); err |= run_bootm_test(IH_COMP_LZO, compress_using_lzo); + err |= run_bootm_test(IH_COMP_LZ4, compress_using_lz4); err |= run_bootm_test(IH_COMP_NONE, compress_using_none); printf("ut_image_decomp %s\n", err == 0 ? "ok" : "FAILED"); diff --git a/test/dm/core.c b/test/dm/core.c index 976a70604f..9fbc70d3ed 100644 --- a/test/dm/core.c +++ b/test/dm/core.c @@ -77,7 +77,7 @@ void dm_leak_check_start(struct unit_test_state *uts) int dm_leak_check_end(struct unit_test_state *uts) { struct mallinfo end; - int id; + int id, diff; /* Don't delete the root class, since we started with that */ for (id = UCLASS_ROOT + 1; id < UCLASS_COUNT; id++) { @@ -90,6 +90,11 @@ int dm_leak_check_end(struct unit_test_state *uts) } end = mallinfo(); + diff = end.uordblks - uts->start.uordblks; + if (diff > 0) + printf("Leak: lost %#xd bytes\n", diff); + else if (diff < 0) + printf("Leak: gained %#xd bytes\n", -diff); ut_asserteq(uts->start.uordblks, end.uordblks); return 0; diff --git a/test/fs/fs-test.sh b/test/fs/fs-test.sh index b88a67ca06..6f0a3455ed 100755 --- a/test/fs/fs-test.sh +++ b/test/fs/fs-test.sh @@ -10,13 +10,13 @@ # Expected results are as follows: # EXT4 tests: # fs-test.sb.ext4.out: Summary: PASS: 17 FAIL: 2 -# fs-test.ext4.out: Summary: PASS: 11 FAIL: 8 -# fs-test.fs.ext4.out: Summary: PASS: 11 FAIL: 8 +# fs-test.ext4.out: Summary: PASS: 10 FAIL: 9 +# fs-test.fs.ext4.out: Summary: PASS: 10 FAIL: 9 # FAT tests: # fs-test.sb.fat.out: Summary: PASS: 17 FAIL: 2 # fs-test.fat.out: Summary: PASS: 19 FAIL: 0 # fs-test.fs.fat.out: Summary: PASS: 19 FAIL: 0 -# Total Summary: TOTAL PASS: 94 TOTAL FAIL: 20 +# Total Summary: TOTAL PASS: 92 TOTAL FAIL: 22 # pre-requisite binaries list. PREREQ_BINS="md5sum mkfs mount umount dd fallocate mkdir" @@ -465,9 +465,9 @@ function check_results() { check_md5 "Test Case 9b " "$1" "$2" 6 \ "TC9: load 1MB chunk crossing 2GB boundary from $4" - # Check 2mb chunk from the last 1MB of 2.5GB file - generic failure case - grep -A6 "Test Case 10 " "$1" | grep -q 'Error: "filesize" not defined' - pass_fail "TC10: load 2MB from the last 1MB of $4 - generic fail case" + # Check 2mb chunk from the last 1MB of 2.5GB file loads 1MB + grep -A6 "Test Case 10 " "$1" | grep -q "filesize=100000" + pass_fail "TC10: load 2MB from the last 1MB of $4 loads 1MB" # Check 1mb chunk write grep -A3 "Test Case 11a " "$1" | \ diff --git a/tools/default_image.c b/tools/default_image.c index 18940af5b5..3ed7014147 100644 --- a/tools/default_image.c +++ b/tools/default_image.c @@ -89,7 +89,6 @@ static void image_set_header(void *ptr, struct stat *sbuf, int ifd, { uint32_t checksum; char *source_date_epoch; - struct tm *time_universal; time_t time; image_header_t * hdr = (image_header_t *)ptr; @@ -103,13 +102,10 @@ static void image_set_header(void *ptr, struct stat *sbuf, int ifd, if (source_date_epoch != NULL) { time = (time_t) strtol(source_date_epoch, NULL, 10); - time_universal = gmtime(&time); - if (time_universal == NULL) { + if (gmtime(&time) == NULL) { fprintf(stderr, "%s: SOURCE_DATE_EPOCH is not valid\n", __func__); time = 0; - } else { - time = mktime(time_universal); } } else { time = sbuf->st_mtime; diff --git a/tools/gen_eth_addr.c b/tools/gen_eth_addr.c index bf9d935efd..5fa3e0cf56 100644 --- a/tools/gen_eth_addr.c +++ b/tools/gen_eth_addr.c @@ -15,7 +15,7 @@ main(int argc, char *argv[]) { unsigned long ethaddr_low, ethaddr_high; - srand(time(0) | getpid()); + srand(time(0) + (getpid() << 8)); /* * setting the 2nd LSB in the most significant byte of diff --git a/tools/imximage.c b/tools/imximage.c index 0da48a733d..7c219222e9 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -160,54 +160,80 @@ static void set_dcd_val_v1(struct imx_header *imxhdr, char *name, int lineno, } } +static struct dcd_v2_cmd *gd_last_cmd; + static void set_dcd_param_v2(struct imx_header *imxhdr, uint32_t dcd_len, int32_t cmd) { dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table; + struct dcd_v2_cmd *d = gd_last_cmd; + struct dcd_v2_cmd *d2; + int len; + + if (!d) + d = &dcd_v2->dcd_cmd; + d2 = d; + len = be16_to_cpu(d->write_dcd_command.length); + if (len > 4) + d2 = (struct dcd_v2_cmd *)(((char *)d) + len); switch (cmd) { case CMD_WRITE_DATA: - dcd_v2->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG; - dcd_v2->write_dcd_command.length = cpu_to_be16( - dcd_len * sizeof(dcd_addr_data_t) + 4); - dcd_v2->write_dcd_command.param = DCD_WRITE_DATA_PARAM; + if ((d->write_dcd_command.tag == DCD_WRITE_DATA_COMMAND_TAG) && + (d->write_dcd_command.param == DCD_WRITE_DATA_PARAM)) + break; + d = d2; + d->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG; + d->write_dcd_command.length = cpu_to_be16(4); + d->write_dcd_command.param = DCD_WRITE_DATA_PARAM; break; case CMD_WRITE_CLR_BIT: - dcd_v2->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG; - dcd_v2->write_dcd_command.length = cpu_to_be16( - dcd_len * sizeof(dcd_addr_data_t) + 4); - dcd_v2->write_dcd_command.param = DCD_WRITE_CLR_BIT_PARAM; + if ((d->write_dcd_command.tag == DCD_WRITE_DATA_COMMAND_TAG) && + (d->write_dcd_command.param == DCD_WRITE_CLR_BIT_PARAM)) + break; + d = d2; + d->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG; + d->write_dcd_command.length = cpu_to_be16(4); + d->write_dcd_command.param = DCD_WRITE_CLR_BIT_PARAM; break; /* * Check data command only supports one entry, - * so use 0xC = size(address + value + command). */ case CMD_CHECK_BITS_SET: - dcd_v2->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG; - dcd_v2->write_dcd_command.length = cpu_to_be16(0xC); - dcd_v2->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM; + d = d2; + d->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG; + d->write_dcd_command.length = cpu_to_be16(4); + d->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM; break; case CMD_CHECK_BITS_CLR: - dcd_v2->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG; - dcd_v2->write_dcd_command.length = cpu_to_be16(0xC); - dcd_v2->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM; + d = d2; + d->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG; + d->write_dcd_command.length = cpu_to_be16(4); + d->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM; break; default: break; } + gd_last_cmd = d; } static void set_dcd_val_v2(struct imx_header *imxhdr, char *name, int lineno, int fld, uint32_t value, uint32_t off) { - dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table; + struct dcd_v2_cmd *d = gd_last_cmd; + int len; + + len = be16_to_cpu(d->write_dcd_command.length); + off = (len - 4) >> 3; switch (fld) { case CFG_REG_ADDRESS: - dcd_v2->addr_data[off].addr = cpu_to_be32(value); + d->addr_data[off].addr = cpu_to_be32(value); break; case CFG_REG_VALUE: - dcd_v2->addr_data[off].value = cpu_to_be32(value); + d->addr_data[off].value = cpu_to_be32(value); + off++; + d->write_dcd_command.length = cpu_to_be16((off << 3) + 4); break; default: break; @@ -236,12 +262,20 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len, char *name, int lineno) { dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table; + struct dcd_v2_cmd *d = gd_last_cmd; + int len; + + if (!d) + d = &dcd_v2->dcd_cmd; + len = be16_to_cpu(d->write_dcd_command.length); + if (len > 4) + d = (struct dcd_v2_cmd *)(((char *)d) + len); + + len = (char *)d - (char *)&dcd_v2->header; dcd_v2->header.tag = DCD_HEADER_TAG; - dcd_v2->header.length = cpu_to_be16( - dcd_len * sizeof(dcd_addr_data_t) + 8); + dcd_v2->header.length = cpu_to_be16(len); dcd_v2->header.version = DCD_VERSION; - set_dcd_param_v2(imxhdr, dcd_len, CMD_WRITE_DATA); } static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, @@ -314,6 +348,7 @@ static void set_hdr_func(void) max_dcd_entries = MAX_HW_CFG_SIZE_V1; break; case IMXIMAGE_V2: + gd_last_cmd = NULL; set_dcd_val = set_dcd_val_v2; set_dcd_param = set_dcd_param_v2; set_dcd_rst = set_dcd_rst_v2; @@ -361,8 +396,8 @@ static void print_hdr_v2(struct imx_header *imx_hdr) dcd_v2_t *dcd_v2 = &hdr_v2->dcd_table; uint32_t size, version; - size = be16_to_cpu(dcd_v2->header.length) - 8; - if (size > (MAX_HW_CFG_SIZE_V2 * sizeof(dcd_addr_data_t))) { + size = be16_to_cpu(dcd_v2->header.length); + if (size > (MAX_HW_CFG_SIZE_V2 * sizeof(dcd_addr_data_t)) + 8) { fprintf(stderr, "Error: Image corrupt DCD size %d exceed maximum %d\n", (uint32_t)(size / sizeof(dcd_addr_data_t)), diff --git a/tools/imximage.h b/tools/imximage.h index d41c74f327..c7b9b5c8cc 100644 --- a/tools/imximage.h +++ b/tools/imximage.h @@ -133,10 +133,14 @@ typedef struct { uint8_t param; } __attribute__((packed)) write_dcd_command_t; -typedef struct { - ivt_header_t header; +struct dcd_v2_cmd { write_dcd_command_t write_dcd_command; dcd_addr_data_t addr_data[MAX_HW_CFG_SIZE_V2]; +}; + +typedef struct { + ivt_header_t header; + struct dcd_v2_cmd dcd_cmd; uint32_t padding[1]; /* end up on an 8-byte boundary */ } dcd_v2_t; diff --git a/tools/kwbimage.c b/tools/kwbimage.c index 3fa90d3a75..5e62d08a80 100644 --- a/tools/kwbimage.c +++ b/tools/kwbimage.c @@ -17,89 +17,6 @@ #include <stdint.h> #include "kwbimage.h" -#define ALIGN_SUP(x, a) (((x) + (a - 1)) & ~(a - 1)) - -/* Structure of the main header, version 0 (Kirkwood, Dove) */ -struct main_hdr_v0 { - uint8_t blockid; /*0 */ - uint8_t nandeccmode; /*1 */ - uint16_t nandpagesize; /*2-3 */ - uint32_t blocksize; /*4-7 */ - uint32_t rsvd1; /*8-11 */ - uint32_t srcaddr; /*12-15 */ - uint32_t destaddr; /*16-19 */ - uint32_t execaddr; /*20-23 */ - uint8_t satapiomode; /*24 */ - uint8_t rsvd3; /*25 */ - uint16_t ddrinitdelay; /*26-27 */ - uint16_t rsvd2; /*28-29 */ - uint8_t ext; /*30 */ - uint8_t checksum; /*31 */ -}; - -struct ext_hdr_v0_reg { - uint32_t raddr; - uint32_t rdata; -}; - -#define EXT_HDR_V0_REG_COUNT ((0x1dc - 0x20) / sizeof(struct ext_hdr_v0_reg)) - -struct ext_hdr_v0 { - uint32_t offset; - uint8_t reserved[0x20 - sizeof(uint32_t)]; - struct ext_hdr_v0_reg rcfg[EXT_HDR_V0_REG_COUNT]; - uint8_t reserved2[7]; - uint8_t checksum; -}; - -/* Structure of the main header, version 1 (Armada 370, Armada XP) */ -struct main_hdr_v1 { - uint8_t blockid; /* 0 */ - uint8_t reserved1; /* 1 */ - uint16_t reserved2; /* 2-3 */ - uint32_t blocksize; /* 4-7 */ - uint8_t version; /* 8 */ - uint8_t headersz_msb; /* 9 */ - uint16_t headersz_lsb; /* A-B */ - uint32_t srcaddr; /* C-F */ - uint32_t destaddr; /* 10-13 */ - uint32_t execaddr; /* 14-17 */ - uint8_t reserved3; /* 18 */ - uint8_t nandblocksize; /* 19 */ - uint8_t nandbadblklocation; /* 1A */ - uint8_t reserved4; /* 1B */ - uint16_t reserved5; /* 1C-1D */ - uint8_t ext; /* 1E */ - uint8_t checksum; /* 1F */ -}; - -/* - * Header for the optional headers, version 1 (Armada 370, Armada XP) - */ -struct opt_hdr_v1 { - uint8_t headertype; - uint8_t headersz_msb; - uint16_t headersz_lsb; - char data[0]; -}; - -/* - * Various values for the opt_hdr_v1->headertype field, describing the - * different types of optional headers. The "secure" header contains - * informations related to secure boot (encryption keys, etc.). The - * "binary" header contains ARM binary code to be executed prior to - * executing the main payload (usually the bootloader). This is - * typically used to execute DDR3 training code. The "register" header - * allows to describe a set of (address, value) tuples that are - * generally used to configure the DRAM controller. - */ -#define OPT_HDR_V1_SECURE_TYPE 0x1 -#define OPT_HDR_V1_BINARY_TYPE 0x2 -#define OPT_HDR_V1_REGISTER_TYPE 0x3 - -#define KWBHEADER_V1_SIZE(hdr) \ - (((hdr)->headersz_msb << 16) | (hdr)->headersz_lsb) - static struct image_cfg_element *image_cfg; static int cfgn; @@ -174,17 +91,6 @@ struct image_cfg_element { #define IMAGE_CFG_ELEMENT_MAX 256 /* - * Byte 8 of the image header contains the version number. In the v0 - * header, byte 8 was reserved, and always set to 0. In the v1 header, - * byte 8 has been changed to a proper field, set to 1. - */ -static unsigned int image_version(void *header) -{ - unsigned char *ptr = header; - return ptr[8]; -} - -/* * Utility functions to manipulate boot mode and ecc modes (convert * them back and forth between description strings and the * corresponding numerical identifiers). diff --git a/tools/kwbimage.h b/tools/kwbimage.h index 8e4a4e2810..9d2585c0e7 100644 --- a/tools/kwbimage.h +++ b/tools/kwbimage.h @@ -29,57 +29,109 @@ #define IBR_HDR_UART_ID 0x69 #define IBR_DEF_ATTRIB 0x00 -enum kwbimage_cmd { - CMD_INVALID, - CMD_BOOT_FROM, - CMD_NAND_ECC_MODE, - CMD_NAND_PAGE_SIZE, - CMD_SATA_PIO_MODE, - CMD_DDR_INIT_DELAY, - CMD_DATA -}; +#define ALIGN_SUP(x, a) (((x) + (a - 1)) & ~(a - 1)) -enum kwbimage_cmd_types { - CFG_INVALID = -1, - CFG_COMMAND, - CFG_DATA0, - CFG_DATA1 -}; - -/* typedefs */ -typedef struct bhr_t { - uint8_t blockid; /*0 */ - uint8_t nandeccmode; /*1 */ +/* Structure of the main header, version 0 (Kirkwood, Dove) */ +struct main_hdr_v0 { + uint8_t blockid; /*0 */ + uint8_t nandeccmode; /*1 */ uint16_t nandpagesize; /*2-3 */ uint32_t blocksize; /*4-7 */ uint32_t rsvd1; /*8-11 */ uint32_t srcaddr; /*12-15 */ uint32_t destaddr; /*16-19 */ uint32_t execaddr; /*20-23 */ - uint8_t satapiomode; /*24 */ - uint8_t rsvd3; /*25 */ + uint8_t satapiomode; /*24 */ + uint8_t rsvd3; /*25 */ uint16_t ddrinitdelay; /*26-27 */ uint16_t rsvd2; /*28-29 */ - uint8_t ext; /*30 */ - uint8_t checkSum; /*31 */ -} bhr_t, *pbhr_t; + uint8_t ext; /*30 */ + uint8_t checksum; /*31 */ +}; -struct reg_config { +struct ext_hdr_v0_reg { uint32_t raddr; uint32_t rdata; }; -typedef struct extbhr_t { - uint32_t dramregsoffs; - uint8_t rsrvd1[0x20 - sizeof(uint32_t)]; - struct reg_config rcfg[KWBIMAGE_MAX_CONFIG]; - uint8_t rsrvd2[7]; - uint8_t checkSum; -} extbhr_t, *pextbhr_t; +#define EXT_HDR_V0_REG_COUNT ((0x1dc - 0x20) / sizeof(struct ext_hdr_v0_reg)) + +struct ext_hdr_v0 { + uint32_t offset; + uint8_t reserved[0x20 - sizeof(uint32_t)]; + struct ext_hdr_v0_reg rcfg[EXT_HDR_V0_REG_COUNT]; + uint8_t reserved2[7]; + uint8_t checksum; +}; struct kwb_header { - bhr_t kwb_hdr; - extbhr_t kwb_exthdr; + struct main_hdr_v0 kwb_hdr; + struct ext_hdr_v0 kwb_exthdr; +}; + +/* Structure of the main header, version 1 (Armada 370, Armada XP) */ +struct main_hdr_v1 { + uint8_t blockid; /* 0 */ + uint8_t reserved1; /* 1 */ + uint16_t reserved2; /* 2-3 */ + uint32_t blocksize; /* 4-7 */ + uint8_t version; /* 8 */ + uint8_t headersz_msb; /* 9 */ + uint16_t headersz_lsb; /* A-B */ + uint32_t srcaddr; /* C-F */ + uint32_t destaddr; /* 10-13 */ + uint32_t execaddr; /* 14-17 */ + uint8_t reserved3; /* 18 */ + uint8_t nandblocksize; /* 19 */ + uint8_t nandbadblklocation; /* 1A */ + uint8_t reserved4; /* 1B */ + uint16_t reserved5; /* 1C-1D */ + uint8_t ext; /* 1E */ + uint8_t checksum; /* 1F */ +}; + +/* + * Header for the optional headers, version 1 (Armada 370, Armada XP) + */ +struct opt_hdr_v1 { + uint8_t headertype; + uint8_t headersz_msb; + uint16_t headersz_lsb; + char data[0]; +}; + +/* + * Various values for the opt_hdr_v1->headertype field, describing the + * different types of optional headers. The "secure" header contains + * informations related to secure boot (encryption keys, etc.). The + * "binary" header contains ARM binary code to be executed prior to + * executing the main payload (usually the bootloader). This is + * typically used to execute DDR3 training code. The "register" header + * allows to describe a set of (address, value) tuples that are + * generally used to configure the DRAM controller. + */ +#define OPT_HDR_V1_SECURE_TYPE 0x1 +#define OPT_HDR_V1_BINARY_TYPE 0x2 +#define OPT_HDR_V1_REGISTER_TYPE 0x3 + +#define KWBHEADER_V1_SIZE(hdr) \ + (((hdr)->headersz_msb << 16) | (hdr)->headersz_lsb) + +enum kwbimage_cmd { + CMD_INVALID, + CMD_BOOT_FROM, + CMD_NAND_ECC_MODE, + CMD_NAND_PAGE_SIZE, + CMD_SATA_PIO_MODE, + CMD_DDR_INIT_DELAY, + CMD_DATA +}; + +enum kwbimage_cmd_types { + CFG_INVALID = -1, + CFG_COMMAND, + CFG_DATA0, + CFG_DATA1 }; /* @@ -87,4 +139,15 @@ struct kwb_header { */ void init_kwb_image_type (void); +/* + * Byte 8 of the image header contains the version number. In the v0 + * header, byte 8 was reserved, and always set to 0. In the v1 header, + * byte 8 has been changed to a proper field, set to 1. + */ +static inline unsigned int image_version(void *header) +{ + unsigned char *ptr = header; + return ptr[8]; +} + #endif /* _KWBIMAGE_H_ */ diff --git a/tools/kwboot.c b/tools/kwboot.c index af7a6ee3f6..c5f4492b5f 100644 --- a/tools/kwboot.c +++ b/tools/kwboot.c @@ -614,9 +614,10 @@ static int kwboot_img_patch_hdr(void *img, size_t size) { int rc; - bhr_t *hdr; + struct main_hdr_v1 *hdr; uint8_t csum; - const size_t hdrsz = sizeof(*hdr); + size_t hdrsz = sizeof(*hdr); + int image_ver; rc = -1; hdr = img; @@ -626,8 +627,20 @@ kwboot_img_patch_hdr(void *img, size_t size) goto out; } - csum = kwboot_img_csum8(hdr, hdrsz) - hdr->checkSum; - if (csum != hdr->checkSum) { + image_ver = image_version(img); + if (image_ver < 0) { + fprintf(stderr, "Invalid image header version\n"); + errno = EINVAL; + goto out; + } + + if (image_ver == 0) + hdrsz = sizeof(*hdr); + else + hdrsz = KWBHEADER_V1_SIZE(hdr); + + csum = kwboot_img_csum8(hdr, hdrsz) - hdr->checksum; + if (csum != hdr->checksum) { errno = EINVAL; goto out; } @@ -639,14 +652,18 @@ kwboot_img_patch_hdr(void *img, size_t size) hdr->blockid = IBR_HDR_UART_ID; - hdr->nandeccmode = IBR_HDR_ECC_DISABLED; - hdr->nandpagesize = 0; + if (image_ver == 0) { + struct main_hdr_v0 *hdr_v0 = img; - hdr->srcaddr = hdr->ext - ? sizeof(struct kwb_header) - : sizeof(*hdr); + hdr_v0->nandeccmode = IBR_HDR_ECC_DISABLED; + hdr_v0->nandpagesize = 0; + + hdr_v0->srcaddr = hdr_v0->ext + ? sizeof(struct kwb_header) + : sizeof(*hdr_v0); + } - hdr->checkSum = kwboot_img_csum8(hdr, hdrsz) - csum; + hdr->checksum = kwboot_img_csum8(hdr, hdrsz) - csum; rc = 0; out: diff --git a/tools/mkimage.c b/tools/mkimage.c index c50af0510d..8af9d50e2c 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -595,7 +595,7 @@ static void usage(void) params.cmdname); fprintf(stderr, " %s [-D dtc_options] [-f fit-image.its|-F] fit-image\n", params.cmdname); - fprintf(stderr, " -D => set options for device tree compiler\n" + fprintf(stderr, " -D => set all options for device tree compiler\n" " -f => input filename for FIT source\n"); #ifdef CONFIG_FIT_SIGNATURE fprintf(stderr, "Signing / verified boot options: [-k keydir] [-K dtb] [ -c <comment>] [-r]\n" diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c index 3361251c8e..9c1c5b7cee 100644 --- a/tools/mksunxiboot.c +++ b/tools/mksunxiboot.c @@ -15,23 +15,8 @@ #include <errno.h> #include <sys/types.h> #include <sys/stat.h> +#include "asm/arch/spl.h" -/* boot head definition from sun4i boot code */ -struct boot_file_head { - uint32_t b_instruction; /* one intruction jumping to real code */ - uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */ - uint32_t check_sum; /* generated by PC */ - uint32_t length; /* generated by PC */ - /* - * We use a simplified header, only filling in what is needed - * by the boot ROM. To be compatible with Allwinner tools we - * would need to implement the proper fields here instead of - * padding. - */ - uint8_t pad[12]; /* align to 32 bytes */ -}; - -#define BOOT0_MAGIC "eGON.BT0" #define STAMP_VALUE 0x5F0A6C39 /* check sum functon from sun4i boot code */ @@ -99,7 +84,7 @@ int main(int argc, char *argv[]) return EXIT_FAILURE; } - memset(img.pad, 0, BLOCK_SIZE); + memset(&img, 0, sizeof(img)); /* get input file size */ file_size = lseek(fd_in, 0, SEEK_END); @@ -133,6 +118,10 @@ int main(int argc, char *argv[]) ALIGN(file_size + sizeof(struct boot_file_head), BLOCK_SIZE); img.header.b_instruction = cpu_to_le32(img.header.b_instruction); img.header.length = cpu_to_le32(img.header.length); + + memcpy(img.header.spl_signature, SPL_SIGNATURE, 3); /* "sunxi" marker */ + img.header.spl_signature[3] = SPL_HEADER_VERSION; + gen_check_sum(&img.header); count = write(fd_out, &img, le32_to_cpu(img.header.length)); diff --git a/tools/moveconfig.py b/tools/moveconfig.py index 496c90a9dc..1b53f951a4 100755 --- a/tools/moveconfig.py +++ b/tools/moveconfig.py @@ -181,7 +181,7 @@ SLEEP_TIME=0.03 # (https://www.kernel.org/pub/tools/crosstool/files/bin/), except the followings: # arc: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases # blackfin: http://sourceforge.net/projects/adi-toolchain/files/ -# nds32: http://osdk.andestech.com/packages/ +# nds32: http://osdk.andestech.com/packages/nds32le-linux-glibc-v1.tgz # nios2: https://sourcery.mentor.com/GNUToolchain/subscription42545 # sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu CROSS_COMPILE = { diff --git a/tools/mxsboot.c b/tools/mxsboot.c index 15eec9179d..3434c81792 100644 --- a/tools/mxsboot.c +++ b/tools/mxsboot.c @@ -7,6 +7,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include <endian.h> #include <fcntl.h> #include <sys/stat.h> #include <sys/types.h> @@ -556,15 +557,15 @@ static int mx28_create_sd_image(int infd, int outfd) cb = (struct mx28_sd_config_block *)buf; - cb->signature = 0x00112233; - cb->primary_boot_tag = 0x1; - cb->secondary_boot_tag = 0x1; - cb->num_copies = 1; - cb->drv_info[0].chip_num = 0x0; - cb->drv_info[0].drive_type = 0x0; - cb->drv_info[0].tag = 0x1; - cb->drv_info[0].first_sector_number = sd_sector + 4; - cb->drv_info[0].sector_count = (size - 4) / 512; + cb->signature = htole32(0x00112233); + cb->primary_boot_tag = htole32(0x1); + cb->secondary_boot_tag = htole32(0x1); + cb->num_copies = htole32(1); + cb->drv_info[0].chip_num = htole32(0x0); + cb->drv_info[0].drive_type = htole32(0x0); + cb->drv_info[0].tag = htole32(0x1); + cb->drv_info[0].first_sector_number = htole32(sd_sector + 4); + cb->drv_info[0].sector_count = htole32((size - 4) / 512); wr_size = write(outfd, buf, size); if (wr_size != size) { |