diff options
| author | Shaveta Leekha <shaveta@freescale.com> | 2014-02-26 16:07:51 +0530 |
|---|---|---|
| committer | York Sun <yorksun@freescale.com> | 2014-03-07 14:50:56 -0800 |
| commit | c4930b1a0ee5a35c49de10e0289f9c8253e78848 (patch) | |
| tree | 4ccaa1dea2501c269e4029532cca7d1245e141fa | |
| parent | 6df82e3c0f3e1b160ff08dbf4a2e36f8c75de68e (diff) | |
B4860qds: Set SerDes2 refclk2 at to 156.25MHz for XFI to work
Change setting of SerDes2 refclk2 to have the default value as it is
coming on board that is 156.25MHz, for XFI to work.
Also change PLL_NUM variable to the one defined in config_mpc85xx.h
for B4860 and B4420.
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
| -rw-r--r-- | board/freescale/b4860qds/b4860qds.c | 7 |
1 files changed, 3 insertions, 4 deletions
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index 25b3be8663..24a709e257 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -29,7 +29,6 @@ #define CLK_MUX_SEL_MASK 0x4 #define ETH_PHY_CLK_OUT 0x4 -#define PLL_NUM 2 DECLARE_GLOBAL_DATA_PTR; @@ -386,7 +385,7 @@ int config_serdes1_refclks(void) /* Steps For SerDes PLLs reset and reconfiguration after * changing SerDes's refclks */ - for (i = 0; i < PLL_NUM; i++) { + for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) { debug("For PLL%d reset and reconfiguration after" " changing refclks\n", i+1); clrbits_be32(&srds_regs->bank[i].rstctl, @@ -453,7 +452,7 @@ int config_serdes2_refclks(void) if (!ret) { ret = set_serdes_refclk(IDT_SERDES2_ADDRESS, 2, SERDES_REFCLK_100, - SERDES_REFCLK_100, 0); + SERDES_REFCLK_156_25, 0); if (ret) { printf("IDT8T49N222A configuration failed.\n"); goto out; @@ -467,7 +466,7 @@ int config_serdes2_refclks(void) /* Steps For SerDes PLLs reset and reconfiguration after * changing SerDes's refclks */ - for (i = 0; i < PLL_NUM; i++) { + for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) { clrbits_be32(&srds2_regs->bank[i].rstctl, SRDS_RSTCTL_SDRST_B); udelay(10); |