summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2009-03-09 00:41:48 +0100
committerWolfgang Denk <wd@denx.de>2009-03-09 00:41:48 +0100
commit014c595f12d4f7e14cb10188f856465b2d41718f (patch)
tree9130a01fbb5499975530a20a559dbaba9a1f2a89
parent9c2d63ec0e9520948b6d598ea32e9aa4e0de847f (diff)
parentf70fd13e2fe4cf58e251271c27f9c06e141d7f9a (diff)
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Conflicts: lib_ppc/board.c Signed-off-by: Wolfgang Denk <wd@denx.de>
-rw-r--r--board/freescale/mpc837xemds/pci.c14
-rw-r--r--board/keymile/common/common.c2
-rw-r--r--board/keymile/kmeter1/kmeter1.c81
-rw-r--r--cpu/mpc83xx/cpu.c34
-rw-r--r--cpu/mpc83xx/fdt.c18
-rw-r--r--cpu/mpc83xx/spd_sdram.c26
-rw-r--r--drivers/i2c/fsl_i2c.c22
-rw-r--r--include/configs/MPC8349ITX.h5
-rw-r--r--include/configs/keymile-common.h7
-rw-r--r--include/configs/kmeter1.h120
10 files changed, 259 insertions, 70 deletions
diff --git a/board/freescale/mpc837xemds/pci.c b/board/freescale/mpc837xemds/pci.c
index 31116b31ce..29de2e77f0 100644
--- a/board/freescale/mpc837xemds/pci.c
+++ b/board/freescale/mpc837xemds/pci.c
@@ -115,6 +115,13 @@ skip_pci:
if (PARTID_NO_E(spridr) == SPR_8379)
return;
+ if (pex2)
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX_X2,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ else
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+
/* Configure the clock for PCIE controller */
clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM | SCCR_PCIEXP2CM,
SCCR_PCIEXP1CM_1 | SCCR_PCIEXP2CM_1);
@@ -132,13 +139,6 @@ skip_pci:
out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
- if (pex2)
- fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX_X2,
- FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
- else
- fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
- FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
-
mpc83xx_pcie_init(pex2 ? 1 : 2, pcie_reg, 0);
}
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index 1338950814..48ce613b7e 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -318,7 +318,7 @@ int ivm_read_eeprom (void)
if (buf != NULL)
dev_addr = simple_strtoul ((char *)buf, NULL, 16);
- if (eeprom_read (dev_addr, 0, i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN) != 0) {
+ if (i2c_read(dev_addr, 0, 1, i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN) != 0) {
printf ("Error reading EEprom\n");
return -2;
}
diff --git a/board/keymile/kmeter1/kmeter1.c b/board/keymile/kmeter1/kmeter1.c
index f04a57a9cc..660d87b53b 100644
--- a/board/keymile/kmeter1/kmeter1.c
+++ b/board/keymile/kmeter1/kmeter1.c
@@ -24,11 +24,14 @@
#include <miiphy.h>
#include <asm/io.h>
#include <asm/mmu.h>
+#include <asm/processor.h>
#include <pci.h>
#include <libfdt.h>
#include "../common/common.h"
+extern void disable_addr_trans (void);
+extern void enable_addr_trans (void);
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* port pin dir open_drain assign */
@@ -59,27 +62,54 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
{0, 0, 0, 0, QE_IOP_TAB_END},
};
+static int board_init_i2c_busses (void)
+{
+ I2C_MUX_DEVICE *dev = NULL;
+ uchar *buf;
+
+ /* Set up the Bus for the DTTs */
+ buf = (unsigned char *) getenv ("dtt_bus");
+ if (buf != NULL)
+ dev = i2c_mux_ident_muxstring (buf);
+ if (dev == NULL) {
+ printf ("Error couldn't add Bus for DTT\n");
+ printf ("please setup dtt_bus to where your\n");
+ printf ("DTT is found.\n");
+ }
+ return 0;
+}
+
int board_early_init_r (void)
{
- void *reg = (void *)(CONFIG_SYS_IMMR + 0x14a8);
- u32 val;
+ unsigned short svid;
/*
* Because of errata in the UCCs, we have to write to the reserved
* registers to slow the clocks down.
*/
- val = in_be32 (reg);
- /* UCC1 */
- val |= 0x00003000;
- /* UCC2 */
- val |= 0x0c000000;
- out_be32 (reg, val);
+ svid = SVR_REV(mfspr (SVR));
+ switch (svid) {
+ case 0x0020:
+ setbits_be32((void *)(CONFIG_SYS_IMMR + 0x14a8), 0x0c003000);
+ break;
+ case 0x0021:
+ clrsetbits_be32((void *)(CONFIG_SYS_IMMR + 0x14ac),
+ 0x00000050, 0x000000a0);
+ break;
+ }
/* enable the PHY on the PIGGY */
setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x10003), 0x01);
return 0;
}
+int misc_init_r (void)
+{
+ /* add board specific i2c busses */
+ board_init_i2c_busses ();
+ return 0;
+}
+
int fixed_sdram(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
@@ -87,16 +117,7 @@ int fixed_sdram(void)
u32 ddr_size;
u32 ddr_size_log2;
- msize = CONFIG_SYS_DDR_SIZE;
- for (ddr_size = msize << 20, ddr_size_log2 = 0;
- (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
- if (ddr_size & 1)
- return -1;
- }
-
- im->sysconf.ddrlaw[0].ar =
- LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-
+ im->sysconf.ddrlaw[0].ar = LAWAR_EN | 0x1e;
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
@@ -112,6 +133,21 @@ int fixed_sdram(void)
udelay (200);
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+ msize = CONFIG_SYS_DDR_SIZE << 20;
+ disable_addr_trans ();
+ msize = get_ram_size (CONFIG_SYS_DDR_BASE, msize);
+ enable_addr_trans ();
+ msize /= (1024 * 1024);
+ if (CONFIG_SYS_DDR_SIZE != msize) {
+ for (ddr_size = msize << 20, ddr_size_log2 = 0;
+ (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++)
+ if (ddr_size & 1)
+ return -1;
+ im->sysconf.ddrlaw[0].ar =
+ LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+ im->ddr.csbnds[0].csbnds = (((msize / 16) - 1) & 0xff);
+ }
+
return msize;
}
@@ -156,3 +192,12 @@ void ft_board_setup (void *blob, bd_t *bd)
ft_cpu_setup (blob, bd);
}
#endif
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+extern int ivm_read_eeprom (void);
+int hush_init_var (void)
+{
+ ivm_read_eeprom ();
+ return 0;
+}
+#endif
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 9e0a05d615..876f5c731a 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -35,6 +35,10 @@
#include <tsec.h>
#include <netdev.h>
#include <fsl_esdhc.h>
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+#include <asm/immap_qe.h>
+#include <asm/io.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -399,3 +403,33 @@ int cpu_mmc_init(bd_t *bis)
return 0;
#endif
}
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+
+#if !defined(CONFIG_MPC8360)
+#error "CONFIG_BOOTCOUNT_LIMIT only for MPC8360 implemented"
+#endif
+
+#if !defined(CONFIG_BOOTCOUNT_ADDR)
+#define CONFIG_BOOTCOUNT_ADDR (0x110000 + QE_MURAM_SIZE - 2 * sizeof(unsigned long))
+#endif
+
+#include <asm/io.h>
+
+void bootcount_store (ulong a)
+{
+ void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
+ out_be32 (reg, a);
+ out_be32 (reg + 4, BOOTCOUNT_MAGIC);
+}
+
+ulong bootcount_load (void)
+{
+ void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
+
+ if (in_be32 (reg + 4) != BOOTCOUNT_MAGIC)
+ return 0;
+ else
+ return in_be32 (reg);
+}
+#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
index f89077588f..4cc9047372 100644
--- a/cpu/mpc83xx/fdt.c
+++ b/cpu/mpc83xx/fdt.c
@@ -32,6 +32,20 @@ extern void ft_qe_setup(void *blob);
DECLARE_GLOBAL_DATA_PTR;
+#if defined(CONFIG_BOOTCOUNT_LIMIT) && defined(CONFIG_MPC8360)
+#include <asm/immap_qe.h>
+
+void fdt_fixup_muram (void *blob)
+{
+ ulong data[2];
+
+ data[0] = 0;
+ data[1] = QE_MURAM_SIZE - 2 * sizeof(unsigned long);
+ do_fixup_by_path(blob, "/qe/muram/data-only", "reg",
+ data, sizeof (data), 0);
+}
+#endif
+
void ft_cpu_setup(void *blob, bd_t *bd)
{
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
@@ -83,4 +97,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
#endif
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+#if defined(CONFIG_BOOTCOUNT_LIMIT)
+ fdt_fixup_muram (blob);
+#endif
}
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 42a4e675da..ff15cda7a8 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -319,7 +319,20 @@ long int spd_sdram()
ddrc_clk = gd->mem_clk / 1000000;
effective_data_rate = 0;
- if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */
+ if (max_data_rate >= 460) { /* it is DDR2-800, 667, 533 */
+ if (spd.cas_lat & 0x08)
+ caslat = 3;
+ else
+ caslat = 4;
+ if (ddrc_clk <= 460 && ddrc_clk > 350)
+ effective_data_rate = 400;
+ else if (ddrc_clk <=350 && ddrc_clk > 280)
+ effective_data_rate = 333;
+ else if (ddrc_clk <= 280 && ddrc_clk > 230)
+ effective_data_rate = 266;
+ else
+ effective_data_rate = 200;
+ } else if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */
if (ddrc_clk <= 460 && ddrc_clk > 350) {
/* DDR controller clk at 350~460 */
effective_data_rate = 400; /* 5ns */
@@ -466,6 +479,8 @@ long int spd_sdram()
} else {
twr_clk = picos_to_clk(spd.twr * 250);
twtr_clk = picos_to_clk(spd.twtr * 250);
+ if (twtr_clk < 2)
+ twtr_clk = 2;
}
/*
@@ -529,7 +544,7 @@ long int spd_sdram()
if (spd.mem_type == SPD_MEMTYPE_DDR2
&& (odt_wr_cfg || odt_rd_cfg)
&& (caslat < 4)) {
- add_lat = trcd_clk - 1;
+ add_lat = 4 - caslat;
if ((add_lat + caslat) < 4) {
add_lat = 0;
}
@@ -566,6 +581,9 @@ long int spd_sdram()
/* Convert SPD value from quarter nanos to picos. */
trtp_clk = picos_to_clk(spd.trtp * 250);
+ if (trtp_clk < 2)
+ trtp_clk = 2;
+ trtp_clk += add_lat;
cke_min_clk = 3; /* By the book. */
four_act = picos_to_clk(37500); /* By the book. 1k pages? */
@@ -579,7 +597,9 @@ long int spd_sdram()
if (spd.mem_type == SPD_MEMTYPE_DDR2) {
if (effective_data_rate == 266) {
cpo = 0x4; /* READ_LAT + 1/2 */
- } else if (effective_data_rate == 333 || effective_data_rate == 400) {
+ } else if (effective_data_rate == 333) {
+ cpo = 0x6; /* READ_LAT + 1 */
+ } else if (effective_data_rate == 400) {
cpo = 0x7; /* READ_LAT + 5/4 */
} else {
/* Automatic calibration */
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index ce646fd7ed..6ab7d3d9fc 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -42,6 +42,9 @@ DECLARE_GLOBAL_DATA_PTR;
#define CONFIG_SYS_SPD_BUS_NUM 0
#endif
static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM;
+#if defined(CONFIG_I2C_MUX)
+static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0;
+#endif
static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED};
@@ -369,6 +372,19 @@ i2c_probe(uchar chip)
int i2c_set_bus_num(unsigned int bus)
{
+#if defined(CONFIG_I2C_MUX)
+ if (bus < CONFIG_SYS_MAX_I2C_BUS) {
+ i2c_bus_num = bus;
+ } else {
+ int ret;
+
+ ret = i2x_mux_select_mux(bus);
+ if (ret)
+ return ret;
+ i2c_bus_num = 0;
+ }
+ i2c_bus_num_mux = bus;
+#else
#ifdef CONFIG_SYS_I2C2_OFFSET
if (bus > 1) {
#else
@@ -378,7 +394,7 @@ int i2c_set_bus_num(unsigned int bus)
}
i2c_bus_num = bus;
-
+#endif
return 0;
}
@@ -396,7 +412,11 @@ int i2c_set_bus_speed(unsigned int speed)
unsigned int i2c_get_bus_num(void)
{
+#if defined(CONFIG_I2C_MUX)
+ return i2c_bus_num_mux;
+#else
return i2c_bus_num;
+#endif
}
unsigned int i2c_get_bus_speed(void)
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 5e1ddaedd6..38a7386d09 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -99,6 +99,7 @@
#define CONFIG_SYS_I2C_OFFSET 0x3000
#define CONFIG_SYS_I2C2_OFFSET 0x3100
#define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */
+#define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */
#define CONFIG_SYS_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */
#define CONFIG_SYS_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */
@@ -168,6 +169,9 @@
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20)
+
#ifdef CONFIG_HARD_I2C
#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
#endif
@@ -457,6 +461,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
#define CONFIG_CMD_SDRAM
#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114)
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index d70bc48082..c7f6ba34d4 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -42,13 +42,9 @@
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
-
-/* should go away, if kmeter I2C support is enabled */
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
-#endif
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
@@ -73,10 +69,7 @@
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-/* should go away, if kmeter I2C support is enabled */
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
#define CONFIG_HUSH_INIT_VAR 1
-#endif
#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index b86c61d5ff..49a801f63a 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -28,10 +28,12 @@
#define CONFIG_MPC83XX 1 /* MPC83XX family */
#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */
#define CONFIG_KMETER1 1 /* KMETER1 board specific */
+#define CONFIG_HOSTNAME kmeter1
/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
+#define CONFIG_MISC_INIT_R 1
/*
* System Clock Setup
*/
@@ -51,10 +53,11 @@
#define CONFIG_SYS_HRCW_HIGH (\
HRCWH_CORE_ENABLE | \
HRCWH_FROM_0X00000100 | \
- HRCWH_BOOTSEQ_NORMAL | \
+ HRCWH_BOOTSEQ_DISABLE | \
HRCWH_SW_WATCHDOG_DISABLE | \
HRCWH_ROM_LOC_LOCAL_16BIT | \
HRCWH_BIG_ENDIAN | \
+ HRCWH_LALE_EARLY | \
HRCWH_LDP_CLEAR )
/*
@@ -91,8 +94,8 @@
* Manually set up DDR parameters
*/
#define CONFIG_DDR_II
-#define CONFIG_SYS_DDR_SIZE 256 /* MB */
-#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f
+#define CONFIG_SYS_DDR_SIZE 2048 /* MB */
+#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f
#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
CSCONFIG_ROW_BIT_13 | \
CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS)
@@ -101,11 +104,12 @@
SDRAM_CFG_SREN)
#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-#define CONFIG_SYS_DDR_INTERVAL ((0x100 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
- (0x406 << SDRAM_INTERVAL_REFINT_SHIFT))
+#define CONFIG_SYS_DDR_INTERVAL ((0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+ (0x3cf << SDRAM_INTERVAL_REFINT_SHIFT))
-#define CONFIG_SYS_DDR_MODE 0x04440242
-#define CONFIG_SYS_DDR_MODE2 0x00800000
+#define CONFIG_SYS_DDRCDR 0x40000001
+#define CONFIG_SYS_DDR_MODE 0x47860452
+#define CONFIG_SYS_DDR_MODE2 0x8080c000
#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
@@ -116,22 +120,22 @@
(0 << TIMING_CFG0_WRT_SHIFT) | \
(0 << TIMING_CFG0_RWT_SHIFT))
-#define CONFIG_SYS_DDR_TIMING_1 (( TIMING_CFG1_CASLAT_40) | \
+#define CONFIG_SYS_DDR_TIMING_1 (( TIMING_CFG1_CASLAT_50) | \
( 2 << TIMING_CFG1_WRTORD_SHIFT) | \
- ( 1 << TIMING_CFG1_ACTTOACT_SHIFT) | \
- ( 2 << TIMING_CFG1_WRREC_SHIFT) | \
- ( 2 << TIMING_CFG1_REFREC_SHIFT) | \
- ( 2 << TIMING_CFG1_ACTTORW_SHIFT) | \
- ( 6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
- ( 2 << TIMING_CFG1_PRETOACT_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_2 ((5 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+ ( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+ ( 3 << TIMING_CFG1_WRREC_SHIFT) | \
+ ( 7 << TIMING_CFG1_REFREC_SHIFT) | \
+ ( 3 << TIMING_CFG1_ACTTORW_SHIFT) | \
+ ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+ ( 3 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
(3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
(2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
- (1 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
- (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+ (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+ (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
(0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
- (4 << TIMING_CFG2_CPO_SHIFT))
+ (5 << TIMING_CFG2_CPO_SHIFT))
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
@@ -141,9 +145,10 @@
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
#define CONFIG_SYS_FLASH_BASE 0xF0000000
#define CONFIG_SYS_FLASH_BASE_1 0xF2000000
-#define CONFIG_SYS_PIGGY_BASE 0x80000000
+#define CONFIG_SYS_PIGGY_BASE 0xE8000000
+#define CONFIG_SYS_PIGGY_SIZE 128
#define CONFIG_SYS_PAXE_BASE 0xA0000000
-#define CONFIG_SYS_PAXE_SIZE 256
+#define CONFIG_SYS_PAXE_SIZE 512
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
@@ -151,7 +156,7 @@
#undef CONFIG_SYS_RAMBOOT
#endif
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/*
@@ -174,8 +179,8 @@
* Bank Bus Machine PortSz Size Device
* ---- --- ------- ------ ----- ------
* 0 Local GPCM 16 bit 256MB FLASH
- * 1 Local GPCM 8 bit 256KB GPIO/PIGGY
- * 3 Local GPCM 8 bit 256MB PAXE
+ * 1 Local GPCM 8 bit 128MB GPIO/PIGGY
+ * 3 Local GPCM 8 bit 512MB PAXE
*
*/
/*
@@ -209,12 +214,12 @@
* PRIO1/PIGGY on the local bus CS1
*/
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_PIGGY_BASE /* Window base at flash base */
-#define CONFIG_SYS_LBLAWAR1_PRELIM 0x80000011 /* 256KB window size */
+#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */
#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_PIGGY_BASE | \
(1 << BR_PS_SHIFT) | /* 8 bit port size */ \
BR_V)
-#define CONFIG_SYS_OR1_PRELIM (0xfffc0000 | /* 256KB */ \
+#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | /* 128MB */ \
OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
OR_GPCM_SCY_2 | \
OR_GPCM_TRLX | OR_GPCM_EAD)
@@ -223,7 +228,7 @@
* PAXE on the local bus CS3
*/
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE /* Window base at flash base */
-#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001b /* 256MB window size */
+#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PAXE_BASE | \
(1 << BR_PS_SHIFT) | /* 8 bit port size */ \
@@ -296,10 +301,42 @@
#else /* CFG_RAMBOOT */
#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
-#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
#define CONFIG_ENV_SIZE 0x2000
#endif /* CFG_RAMBOOT */
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CONFIG_SYS_I2C_SPEED 200000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_I2C_MULTI_BUS 1
+#define CONFIG_I2C_CMD_TREE 1
+#define CONFIG_SYS_MAX_I2C_BUS 2
+#define CONFIG_I2C_MUX 1
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_MULTI_EEPROMS 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* Support the IVM EEprom */
+#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
+#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
+#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible) */
+#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
+#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */
+#define CONFIG_SYS_DTT_MAX_TEMP 70
+#define CONFIG_SYS_DTT_LOW_TEMP -30
+#define CONFIG_SYS_DTT_HYSTERESIS 3
+#define CONFIG_SYS_DTT_BUS_NUM (2)
+
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
#endif
@@ -345,7 +382,7 @@
/* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_256K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
@@ -365,7 +402,7 @@
/* PAXE: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
@@ -401,16 +438,25 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define BOOTFLASH_START F0000000
+
+#define CONFIG_PRAM 512 /* protected RAM [KBytes] */
+
+#define MTDIDS_DEFAULT "nor0=app"
+#define MTDPARTS_DEFAULT \
+ "mtdparts=app:256k(u-boot),128k(env),128k(envred)," \
+ "1536k(esw0),8704k(rootfs0),1536k(esw1),2432k(rootfs1),640k(var),768k(cfg)"
+
/*
* Environment Configuration
*/
#define CONFIG_ENV_OVERWRITE
-
-#if defined(CONFIG_UEC_ETH)
-#define CONFIG_HAS_ETH0
+#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */
+#define CONFIG_KM_DEF_ENV "km-common=empty\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_KM_DEF_ENV \
"netdev=eth0\0" \
"rootpath=/opt/eldk/ppc_82xx\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -452,6 +498,14 @@
"loadfdt=tftp ${fdt_addr_r} ${fdt_file}\0" \
"loadkernel=tftp ${kernel_addr_r} ${boot_file}\0" \
"unlock=yes\0" \
+ "EEprom_ivm=pca9547:70:9\0" \
+ "dtt_bus=pca9547:70:a\0" \
+ "mtdids=nor0=app \0" \
+ "mtdparts=" MK_STR(MTDPARTS_DEFAULT) "\0" \
""
+#if defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
+#endif
+
#endif /* __CONFIG_H */