arm: dts: k3-am69-sk: Add r5 specific dt support

Add initial support for device tree that runs on R5.

Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>

3 files changed, 475 insertions, 0 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 04c2f36486..b5e73235c0 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -987,6 +987,7 @@ dtb-$(CONFIG_SOC_K3_J721S2) += k3-am68-sk-base-board.dtb\
 			       k3-j721s2-common-proc-board.dtb\
 			       k3-j721s2-r5-common-proc-board.dtb
 dtb-$(CONFIG_SOC_K3_J784S4) +=	k3-am69-sk.dtb \
+				k3-am69-r5-sk.dtb \
 				k3-j784s4-evm.dtb \
 				k3-j784s4-r5-evm.dtb
 dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb \
diff --git a/arch/arm/dts/k3-am69-r5-sk.dts b/arch/arm/dts/k3-am69-r5-sk.dts
new file mode 100644
index 0000000000..f69ebe991d
--- /dev/null
+++ b/arch/arm/dts/k3-am69-r5-sk.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j784s4.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-j784s4-ddr-evm-lp4-4266.dtsi"
+#include "k3-j784s4-ddr.dtsi"
+
+/ {
+	chosen {
+		firmware-loader = &fs_loader0;
+		stdout-path = &main_uart8;
+		tick-timer = &timer1;
+	};
+
+	aliases {
+		remoteproc0 = &sysctrler;
+		remoteproc1 = &a72_0;
+	};
+
+	fs_loader0: fs_loader@0 {
+		compatible = "u-boot,fs-loader";
+		u-boot,dm-pre-reloc;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 32G RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		       <0x08 0x80000000 0x07 0x80000000>;
+	};
+
+	a72_0: a72@0 {
+		compatible = "ti,am654-rproc";
+		reg = <0x0 0x00a90000 0x0 0x10>;
+		power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
+				<&k3_pds 202 TI_SCI_PD_EXCLUSIVE>;
+		resets = <&k3_reset 202 0>;
+		clocks = <&k3_clks 61 0>;
+		assigned-clocks = <&k3_clks 61 0>, <&k3_clks 202 0>;
+		assigned-clock-parents = <&k3_clks 61 1>;
+		assigned-clock-rates = <200000000>, <2000000000>;
+		ti,sci = <&sms>;
+		ti,sci-proc-id = <32>;
+		ti,sci-host-id = <10>;
+		u-boot,dm-spl;
+	};
+
+	clk_200mhz: dummy_clock_200mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		u-boot,dm-spl;
+	};
+
+	clk_19_2mhz: dummy_clock_19_2mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+		u-boot,dm-spl;
+	};
+};
+
+&cbass_mcu_wakeup {
+	sa3_secproxy: secproxy@44880000 {
+		u-boot,dm-spl;
+		compatible = "ti,am654-secure-proxy";
+		reg = <0x0 0x44880000 0x0 0x20000>,
+		      <0x0 0x44860000 0x0 0x20000>,
+		      <0x0 0x43600000 0x0 0x10000>;
+		reg-names = "rt", "scfg", "target_data";
+		#mbox-cells = <1>;
+	};
+
+	mcu_secproxy: secproxy@2a380000 {
+		compatible = "ti,am654-secure-proxy";
+		reg = <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>,
+		      <0x0 0x2a480000 0x0 0x80000>;
+		reg-names = "rt", "scfg", "target_data";
+		#mbox-cells = <1>;
+		u-boot,dm-spl;
+	};
+
+	sysctrler: sysctrler {
+		compatible = "ti,am654-system-controller";
+		mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>, <&sa3_secproxy 5>;
+		mbox-names = "tx", "rx", "boot_notify";
+		u-boot,dm-spl;
+	};
+
+	dm_tifs: dm-tifs {
+		compatible = "ti,j721e-dm-sci";
+		ti,host-id = <3>;
+		ti,secure-host;
+		mbox-names = "rx", "tx";
+		mboxes= <&mcu_secproxy 21>,
+			<&mcu_secproxy 23>;
+		u-boot,dm-spl;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+
+	main_uart8_pins_default: main-uart8-pins-default {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */
+			J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */
+		>;
+	};
+
+	 main_mmc1_pins_default: main-mmc1-pins-default {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */
+			J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */
+			J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */
+			J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */
+			J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */
+			J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */
+			J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */
+			J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-pins-default {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AN37) TIMER_IO1.USB0_DRVVBUS */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */
+			J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */
+			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */
+			J784S4_WKUP_IOPAD(0x03c, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_CSn3.MCU_OSPI0_ECC_FAIL */
+			J784S4_WKUP_IOPAD(0x038, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_CSn2.MCU_OSPI0_RESET_OUT0 */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	wkup_uart0_pins_default: wkup-uart0-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			J784S4_WKUP_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+			J784S4_WKUP_IOPAD(0x0b0, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x0b4, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
+		>;
+	};
+};
+
+&sms {
+	mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
+	mbox-names = "tx", "rx", "notify";
+	ti,host-id = <4>;
+	ti,secure-host;
+	u-boot,dm-spl;
+};
+
+&wkup_uart0 {
+	u-boot,dm-spl;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+	u-boot,dm-spl;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart8 {
+	u-boot,dm-spl;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+};
+
+&main_sdhci0 {
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	ti,driver-strength-ohm = <50>;
+	non-removable;
+	bus-width = <8>;
+};
+
+&main_sdhci1 {
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/* pinctrl-0 = <&main_mmc1_pins_default>; */
+	pinctrl-names = "default";
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	ti,driver-strength-ohm = <50>;
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+	ti,usb2-only;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&mcu_ringacc {
+	ti,sci = <&dm_tifs>;
+};
+
+&mcu_udmap {
+	ti,sci = <&dm_tifs>;
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+	reg = <0x0 0x47040000 0x0 0x100>,
+	      <0x0 0x50000000 0x0 0x8000000>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+		cdns,phy-mode;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+#include "k3-am69-sk-u-boot.dtsi"
diff --git a/arch/arm/dts/k3-am69-sk-u-boot.dtsi b/arch/arm/dts/k3-am69-sk-u-boot.dtsi
new file mode 100644
index 0000000000..7d4eb8cee8
--- /dev/null
+++ b/arch/arm/dts/k3-am69-sk-u-boot.dtsi
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		tick-timer = &timer1;
+	};
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &mcu_i2c1;
+		i2c3 = &main_i2c0;
+		ethernet0 = &mcu_cpsw_port1;
+		spi0 = &ospi0;
+	};
+};
+
+&wkup_i2c0 {
+	u-boot,dm-spl;
+};
+
+&cbass_main {
+	u-boot,dm-spl;
+};
+
+&main_navss {
+	u-boot,dm-spl;
+};
+
+&main_r5fss0 {
+	ti,cluster-mode = <0>;
+};
+
+&main_r5fss1 {
+	ti,cluster-mode = <0>;
+};
+
+&cbass_mcu_wakeup {
+	u-boot,dm-spl;
+
+	timer1: timer@40400000 {
+		compatible = "ti,omap5430-timer";
+		reg = <0x0 0x40400000 0x0 0x80>;
+		ti,timer-alwon;
+		clock-frequency = <250000000>; /* HACK: Temporary fix for wrongly configured MCU_TIMER_CLKSEL */
+		u-boot,dm-spl;
+	};
+
+	chipid@43000014 {
+		u-boot,dm-spl;
+	};
+};
+
+&mcu_navss {
+	u-boot,dm-spl;
+};
+
+&mcu_ringacc {
+	reg =   <0x0 0x2b800000 0x0 0x400000>,
+		<0x0 0x2b000000 0x0 0x400000>,
+		<0x0 0x28590000 0x0 0x100>,
+		<0x0 0x2a500000 0x0 0x40000>,
+		<0x0 0x28440000 0x0 0x40000>;
+	reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+	u-boot,dm-spl;
+};
+
+&mcu_udmap {
+	reg =   <0x0 0x285c0000 0x0 0x100>,
+		<0x0 0x284c0000 0x0 0x4000>,
+		<0x0 0x2a800000 0x0 0x40000>,
+		<0x0 0x284a0000 0x0 0x4000>,
+		<0x0 0x2aa00000 0x0 0x40000>,
+		<0x0 0x28400000 0x0 0x2000>;
+	reg-names = "gcfg", "rchan", "rchanrt", "tchan",
+		    "tchanrt", "rflow";
+	u-boot,dm-spl;
+};
+
+&secure_proxy_main {
+	u-boot,dm-spl;
+};
+
+&sms {
+	u-boot,dm-spl;
+	k3_sysreset: sysreset-controller {
+		compatible = "ti,sci-sysreset";
+		u-boot,dm-spl;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+};
+
+&main_uart8_pins_default {
+	u-boot,dm-spl;
+};
+
+&main_mmc1_pins_default {
+	u-boot,dm-spl;
+};
+
+&main_usbss0_pins_default {
+	u-boot,dm-spl;
+};
+
+&wkup_pmx0 {
+	u-boot,dm-spl;
+};
+
+&k3_pds {
+	u-boot,dm-spl;
+};
+
+&k3_clks {
+	u-boot,dm-spl;
+};
+
+&k3_reset {
+	u-boot,dm-spl;
+};
+
+&main_uart8 {
+	u-boot,dm-spl;
+};
+
+&mcu_uart0 {
+	u-boot,dm-spl;
+};
+
+&wkup_uart0 {
+	u-boot,dm-spl;
+};
+
+&fss {
+	u-boot,dm-spl;
+};
+
+&usbss0 {
+	u-boot,dm-spl;
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	u-boot,dm-spl;
+};
+
+&mcu_cpsw {
+	reg = <0x0 0x46000000 0x0 0x200000>,
+	      <0x0 0x40f00200 0x0 0x8>;
+	reg-names = "cpsw_nuss", "mac_efuse";
+	/delete-property/ ranges;
+
+	cpsw-phy-sel@40f04040 {
+		compatible = "ti,am654-cpsw-phy-sel";
+		reg= <0x0 0x40f04040 0x0 0x4>;
+		reg-names = "gmii-sel";
+	};
+};
+
+&mcu_fss0_ospi0_pins_default {
+	u-boot,dm-spl;
+};
+
+&serdes_ln_ctrl {
+	u-boot,mux-autoprobe;
+};
+
+&usb_serdes_mux {
+	u-boot,mux-autoprobe;
+};
+
+&ospi0 {
+	u-boot,dm-spl;
+
+	flash@0 {
+		cdns,phy-mode;
+		u-boot,dm-spl;
+
+		partition@3fc0000 {
+			label = "ospi.phypattern";
+			reg = <0x3fc0000 0x40000>;
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&main_sdhci0 {
+	u-boot,dm-spl;
+};
+
+&main_sdhci1 {
+	u-boot,dm-spl;
+};