MLK-17082-01 imx: add optee support for imx6sll

  Add different defconfig for optee;
  Enable the TZASC support;
  Add env config for tee support.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

4 files changed, 93 insertions, 19 deletions

diff --git a/board/freescale/mx6sllevk/imximage.cfg b/board/freescale/mx6sllevk/imximage.cfg
index 7d8b323600..705a9e85c0 100644
--- a/board/freescale/mx6sllevk/imximage.cfg
+++ b/board/freescale/mx6sllevk/imximage.cfg
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * SPDX-License-Identifier:	GPL-2.0+
  *
@@ -53,6 +54,11 @@ DATA 4 0x020c4078 0xffffffff
 DATA 4 0x020c407c 0xffffffff
 DATA 4 0x020c4080 0xffffffff
 
+#ifdef CONFIG_IMX_OPTEE
+DATA 4 0x20e4024 0x00000001
+CHECK_BITS_SET 4 0x20e4024 0x1
+#endif
+
 DATA 4 0x020E0550 0x00080000
 DATA 4 0x020E0534 0x00000000
 DATA 4 0x020E02AC 0x00000030
diff --git a/board/freescale/mx6sllevk/mx6sllevk.c b/board/freescale/mx6sllevk/mx6sllevk.c
index d42e0b5ca1..29f29bb2d2 100644
--- a/board/freescale/mx6sllevk/mx6sllevk.c
+++ b/board/freescale/mx6sllevk/mx6sllevk.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -426,6 +427,12 @@ int board_init(void)
 
 int board_late_init(void)
 {
+
+	setenv("tee", "no");
+#ifdef CONFIG_IMX_OPTEE
+	setenv("tee", "yes");
+#endif
+
 #ifdef CONFIG_ENV_IS_IN_MMC
 	board_late_mmc_env_init();
 #endif
diff --git a/configs/mx6sllevk_optee_defconfig b/configs/mx6sllevk_optee_defconfig
new file mode 100644
index 0000000000..bdc40af5e7
--- /dev/null
+++ b/configs/mx6sllevk_optee_defconfig
@@ -0,0 +1,44 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_MX6SLLEVK=y
+CONFIG_VIDEO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6sll-evk"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sllevk/imximage.cfg"
+CONFIG_IMX_OPTEE=y
+CONFIG_BOOTDELAY=3
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+# CONFIG_BLK is not set
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
diff --git a/include/configs/mx6sllevk.h b/include/configs/mx6sllevk.h
index 200c21a0f9..967bfbdfb9 100644
--- a/include/configs/mx6sllevk.h
+++ b/include/configs/mx6sllevk.h
@@ -36,7 +36,11 @@
 		"\0" \
 	"initrd_addr=0x83800000\0" \
 	"initrd_high=0xffffffff\0" \
-	"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
+	"bootcmd_mfg=run mfgtool_args;" \
+		"if test ${tee} = yes; then " \
+			"bootm ${tee_addr} ${initrd_addr} ${fdt_addr}; " \
+		"else " \
+			"bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_MFG_ENV_SETTINGS \
@@ -48,6 +52,8 @@
 	"initrd_high=0xffffffff\0" \
 	"fdt_file=imx6sll-evk.dtb\0" \
 	"fdt_addr=0x83000000\0" \
+	"tee_addr=0x84000000\0" \
+	"tee_file=undefined\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
@@ -62,20 +68,25 @@
 		"source\0" \
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"loadtee=fatload mmc ${mmcdev}:${mmcpart} ${tee_addr} ${tee_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
+		"if test ${tee} = yes; then " \
+			"run loadfdt; run loadtee; bootm ${tee_addr} - ${fdt_addr}; " \
+		"else " \
+			"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+				"if run loadfdt; then " \
+					"bootz ${loadaddr} - ${fdt_addr}; " \
 				"else " \
-					"echo WARN: Cannot load the DT; " \
+					"if test ${boot_fdt} = try; then " \
+						"bootz; " \
+					"else " \
+						"echo WARN: Cannot load the DT; " \
+					"fi; " \
 				"fi; " \
+			"else " \
+				"bootz; " \
 			"fi; " \
-		"else " \
-			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
@@ -89,18 +100,24 @@
 			"setenv get_cmd tftp; " \
 		"fi; " \
 		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
+		"if test ${tee} = yes; then " \
+			"${get_cmd} ${tee_addr} ${tee_file}; " \
+			"${get_cmd} ${fdt_addr} ${fdt_file}; " \
+			"bootm ${tee_addr} - ${fdt_addr}; " \
+		"else " \
+			"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+				"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+					"bootz ${loadaddr} - ${fdt_addr}; " \
 				"else " \
-					"echo WARN: Cannot load the DT; " \
+					"if test ${boot_fdt} = try; then " \
+						"bootz; " \
+					"else " \
+						"echo WARN: Cannot load the DT; " \
+					"fi; " \
 				"fi; " \
+			"else " \
+				"bootz; " \
 			"fi; " \
-		"else " \
-			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \