From dc909c3661ea899900a98e0322cc711d74da396b Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Wed, 5 Nov 2014 16:10:13 +0100 Subject: Apalis/Colibri iMX6/T20/T30/VF50/VF61: Update release notes --- release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt | 12 ++++++++---- release-notes/Apalis_iMX6_LinuxReleaseNotesV2.x.txt | 2 +- release-notes/Colibri_T20_LinuxReleaseNotesV2.x.txt | 8 +++++++- release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt | 10 +++++++--- release-notes/Colibri_VF_LinuxReleaseNotesV2.x.txt | 9 +++++++-- 5 files changed, 30 insertions(+), 11 deletions(-) (limited to 'release-notes') diff --git a/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt b/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt index 8c45e9d..9572284 100644 --- a/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt +++ b/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt @@ -42,6 +42,10 @@ Linux Image V2.3 Beta 3 (October 31, 2014) - repository linux-toradex branch tegra - repository u-boot-toradex branch 2014.10-toradex +Note: +- As we no longer rely on proprietary Fastboot/NvFlash for flashing the + instructions at the very bottom of this release notes changed. + Known Issues: - connecting an analogue mic to the on module codec resets the codec, so that neither headphone out nor mic in works anymore. Workaround: Have mic @@ -50,7 +54,7 @@ Known Issues: - LP1 suspend might fail due to pending USB interrupts - LP1 suspend might hang due to display controller issue - partition resizing on first boot not working -- fw_printenv not working +- fw_setenv not working ******************************************************************************** Linux Image V2.3 Beta 2 (September 3, 2014) @@ -459,11 +463,11 @@ Flash eMMC: - if you update from a previous image use the following U-Boot commands: - using SD/MMC 8bit (X18) socket on EvalBoard: setenv drive 1 - setenv setupdate 'mmc dev ${drive}; fatload mmc ${drive}:1 ${loadaddr} flash_mmc.img; source' + setenv setupdate 'mmc dev ${drive}; fatload mmc ${drive}:1 ${loadaddr} flash_mmc.img; source ${loadaddr}' save - using SD/MMC 4bit (X19) socket on EvalBoard or micro SD card socket (X10) on Ixora: setenv drive 2 - setenv setupdate 'mmc dev ${drive}; fatload mmc ${drive}:1 ${loadaddr} flash_mmc.img; source' + setenv setupdate 'mmc dev ${drive}; fatload mmc ${drive}:1 ${loadaddr} flash_mmc.img; source ${loadaddr}' save - use 'run setupdate' U-Boot command and then - use 'run update' U-Boot command @@ -496,4 +500,4 @@ If the boot loader on the module got corrupted this recovers it by loading U-Boo - run ./update.sh -d - stop at the U-Boot prompt and begin the update as stated above -Toradex, November 3, 2014 +Toradex, November 5, 2014 diff --git a/release-notes/Apalis_iMX6_LinuxReleaseNotesV2.x.txt b/release-notes/Apalis_iMX6_LinuxReleaseNotesV2.x.txt index 2369748..2d029a9 100644 --- a/release-notes/Apalis_iMX6_LinuxReleaseNotesV2.x.txt +++ b/release-notes/Apalis_iMX6_LinuxReleaseNotesV2.x.txt @@ -259,7 +259,7 @@ Flash eMMC: - if you update from a V2.2 image either use an EvalBoard for update or use on Ixora the U-Boot command: setenv drive 2 - setenv setupdate 'fatload mmc ${drive}:1 ${loadaddr} flash_mmc.img; source' + setenv setupdate 'fatload mmc ${drive}:1 ${loadaddr} flash_mmc.img; source ${loadaddr}' save - Boot to U-Boot prompt and start the update: - apply power or reset diff --git a/release-notes/Colibri_T20_LinuxReleaseNotesV2.x.txt b/release-notes/Colibri_T20_LinuxReleaseNotesV2.x.txt index 76d7008..3156e35 100644 --- a/release-notes/Colibri_T20_LinuxReleaseNotesV2.x.txt +++ b/release-notes/Colibri_T20_LinuxReleaseNotesV2.x.txt @@ -36,6 +36,12 @@ Linux Image V2.3 Beta 3 (October 31, 2014) Known Issues: - LP1 suspend might fail due to pending USB interrupts - LP1 suspend might hang due to display controller issue +- Unfortunately even though the Angstrom-Distribution now has even a few ARM + Thum2 VFP binary feeds without any NEON requirement available we forgot to + enable them. To use their binary feeds e.g. using the opkg package manager + please add in /etc/opkg/base-feed.conf et. al. a line as follows (e.g. just + replace base as needed): +src/gz base http://feeds.angstrom-distribution.org/feeds/v2014.06/ipk/eglibc/armv7at2hf-vfp/base ******************************************************************************** Linux Image V2.3 Beta 1 (August 4, 2014) @@ -485,4 +491,4 @@ Boot from SD Card: - power cycle - upon first boot post-install scripts are run which takes around 2 minutes, please be patient -Toradex, November 3, 2014 +Toradex, November 5, 2014 diff --git a/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt b/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt index cfffb5e..fe867be 100644 --- a/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt +++ b/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt @@ -43,6 +43,10 @@ Linux Image V2.3 Beta 3 (October 31, 2014) - repository linux-toradex branch tegra - repository u-boot-toradex branch 2014.10-toradex +Note: +- As we no longer rely on proprietary Fastboot/NvFlash for flashing the + instructions at the very bottom of this release notes changed. + Known Issues: - connecting an analogue mic to the on module codec resets the codec, so that neither headphone out nor mic in works anymore. Workaround: Have mic @@ -51,7 +55,7 @@ Known Issues: - LP1 suspend might fail due to pending USB interrupts - LP1 suspend might hang due to display controller issue - partition resizing on first boot not working -- fw_printenv not working +- fw_setenv not working ******************************************************************************** Linux Image V2.3 Beta 1 (August 4, 2014) @@ -490,7 +494,7 @@ Flash eMMC: - hit any key to stop auto booting - if you update from a previous image use the following U-Boot commands: setenv drive 1 - setenv setupdate 'mmc dev ${drive}; fatload mmc ${drive}:1 ${loadaddr} flash_mmc.img; source' + setenv setupdate 'mmc dev ${drive}; fatload mmc ${drive}:1 ${loadaddr} flash_mmc.img; source ${loadaddr}' save - use 'run setupdate' U-Boot command and then - use 'run update' U-Boot command @@ -530,4 +534,4 @@ If the boot loader on the module got corrupted this recovers it by loading U-Boo - run ./update.sh -d - stop at the U-Boot prompt and begin the update as stated above -Toradex, November 3, 2014 +Toradex, November 5, 2014 diff --git a/release-notes/Colibri_VF_LinuxReleaseNotesV2.x.txt b/release-notes/Colibri_VF_LinuxReleaseNotesV2.x.txt index 870da22..f001d3c 100644 --- a/release-notes/Colibri_VF_LinuxReleaseNotesV2.x.txt +++ b/release-notes/Colibri_VF_LinuxReleaseNotesV2.x.txt @@ -38,6 +38,11 @@ Linux Image V2.3 Beta 3 (October 31, 2014) - repository linux-toradex branch colibri_vf - repository u-boot-toradex branch 2014.10-toradex +Note: +- We use now zImage instead of uImage kernel image format and moved the kernel + inside the root filesystem. If you use custom U-Boot scripts, you need to + alter those scripts accordingly. + Known Issues: - If the module does not boot remove all displays connected to HSYNC, VSYNC and reset. (This has been observed on an Evaluation Board V2.1) @@ -339,7 +344,7 @@ Flash NAND: - apply power or reset - hit any key to stop auto booting - use 'run setupdate' commands - (for old U-Boot versions 'mmc part 0 ; fatload mmc 0:1 $loadaddr flash_mmc.img ;source') + (for old U-Boot versions 'mmc part 0 ; fatload mmc 0:1 $loadaddr flash_mmc.img ;source $loadaddr') - use 'run update' command Boot from NAND: @@ -427,4 +432,4 @@ Boot from SD Card: - apply power - upon first boot post-install scripts are run which takes around 2 minutes, please be patient -Toradex, November 3, 2014 +Toradex, November 5, 2014 -- cgit v1.2.3