From 24e9657f5bea1ae709b12844006f8b44d2d53bf7 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Mon, 4 Jun 2018 15:44:28 +0200 Subject: apalis-t30: mainline kernel machine This patch adds mainline linux based Apalis T30 machine. Just the bare minimum to run the Toradex Easy Installer. It does not yet include any compatible recipes for graphics. Signed-off-by: Marcel Ziswiler Acked-by: Stefan Agner --- recipes-bsp/u-boot/files/tegra3m/fw_env.config | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 recipes-bsp/u-boot/files/tegra3m/fw_env.config (limited to 'recipes-bsp/u-boot/files/tegra3m/fw_env.config') diff --git a/recipes-bsp/u-boot/files/tegra3m/fw_env.config b/recipes-bsp/u-boot/files/tegra3m/fw_env.config new file mode 100644 index 0000000..d2be4ee --- /dev/null +++ b/recipes-bsp/u-boot/files/tegra3m/fw_env.config @@ -0,0 +1,15 @@ +# Configuration file for fw_(printenv/setenv) utility. +# Up to two entries are valid, in this case the redundant +# environment sector is assumed present. +# Device offset must be prefixed with 0x to be parsed as a hexadecimal value. +# On a block device a negative offset is treated as a backwards offset from the +# end of the device/partition, rather than a forwards offset from the start. + +# Colibri T30/Apalis T30 +# U-Boot environment is stored at the end of the first eMMC boot partition +# hence use a negative value. The environment is just in front of the config +# block which occupies the last sector (hence -0x200) + +# Block device name Device offset Env. size +/dev/mmcblk0boot0 -0x2200 0x2000 + -- cgit v1.2.3