summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/8250/8250_omap.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250/8250_omap.c')
-rw-r--r--drivers/tty/serial/8250/8250_omap.c93
1 files changed, 47 insertions, 46 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index a6b374c026a8..f114847331fe 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -32,6 +32,7 @@
#include "8250.h"
#define DEFAULT_CLK_SPEED 48000000
+#define OMAP_UART_REGSHIFT 2
#define UART_ERRATA_i202_MDR1_ACCESS (1 << 0)
#define OMAP_UART_WER_HAS_TX_WAKEUP (1 << 1)
@@ -109,6 +110,7 @@
#define UART_OMAP_RX_LVL 0x19
struct omap8250_priv {
+ void __iomem *membase;
int line;
u8 habit;
u8 mdr1;
@@ -152,9 +154,9 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p);
static inline void omap_8250_rx_dma_flush(struct uart_8250_port *p) { }
#endif
-static u32 uart_read(struct uart_8250_port *up, u32 reg)
+static u32 uart_read(struct omap8250_priv *priv, u32 reg)
{
- return readl(up->port.membase + (reg << up->port.regshift));
+ return readl(priv->membase + (reg << OMAP_UART_REGSHIFT));
}
/*
@@ -552,7 +554,7 @@ static void omap_serial_fill_features_erratas(struct uart_8250_port *up,
u32 mvr, scheme;
u16 revision, major, minor;
- mvr = uart_read(up, UART_OMAP_MVER);
+ mvr = uart_read(priv, UART_OMAP_MVER);
/* Check revision register scheme */
scheme = mvr >> OMAP_UART_MVR_SCHEME_SHIFT;
@@ -1336,7 +1338,7 @@ static int omap8250_probe(struct platform_device *pdev)
UPF_HARD_FLOW;
up.port.private_data = priv;
- up.port.regshift = 2;
+ up.port.regshift = OMAP_UART_REGSHIFT;
up.port.fifosize = 64;
up.tx_loadsz = 64;
up.capabilities = UART_CAP_FIFO;
@@ -1397,6 +1399,8 @@ static int omap8250_probe(struct platform_device *pdev)
DEFAULT_CLK_SPEED);
}
+ priv->membase = membase;
+ priv->line = -ENODEV;
priv->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE;
priv->calc_latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE;
cpu_latency_qos_add_request(&priv->pm_qos_request, priv->latency);
@@ -1404,6 +1408,8 @@ static int omap8250_probe(struct platform_device *pdev)
spin_lock_init(&priv->rx_dma_lock);
+ platform_set_drvdata(pdev, priv);
+
device_init_wakeup(&pdev->dev, true);
pm_runtime_enable(&pdev->dev);
pm_runtime_use_autosuspend(&pdev->dev);
@@ -1465,7 +1471,6 @@ static int omap8250_probe(struct platform_device *pdev)
goto err;
}
priv->line = ret;
- platform_set_drvdata(pdev, priv);
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
return 0;
@@ -1487,11 +1492,12 @@ static int omap8250_remove(struct platform_device *pdev)
if (err)
return err;
+ serial8250_unregister_port(priv->line);
+ priv->line = -ENODEV;
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
flush_work(&priv->qos_work);
pm_runtime_disable(&pdev->dev);
- serial8250_unregister_port(priv->line);
cpu_latency_qos_remove_request(&priv->pm_qos_request);
device_init_wakeup(&pdev->dev, false);
return 0;
@@ -1521,7 +1527,7 @@ static int omap8250_suspend(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
struct uart_8250_port *up = serial8250_get_port(priv->line);
- int err;
+ int err = 0;
serial8250_suspend_port(priv->line);
@@ -1531,7 +1537,8 @@ static int omap8250_suspend(struct device *dev)
if (!device_may_wakeup(dev))
priv->wer = 0;
serial_out(up, UART_OMAP_WER, priv->wer);
- err = pm_runtime_force_suspend(dev);
+ if (uart_console(&up->port) && console_suspend_enabled)
+ err = pm_runtime_force_suspend(dev);
flush_work(&priv->qos_work);
return err;
@@ -1540,11 +1547,15 @@ static int omap8250_suspend(struct device *dev)
static int omap8250_resume(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
+ struct uart_8250_port *up = serial8250_get_port(priv->line);
int err;
- err = pm_runtime_force_resume(dev);
- if (err)
- return err;
+ if (uart_console(&up->port) && console_suspend_enabled) {
+ err = pm_runtime_force_resume(dev);
+ if (err)
+ return err;
+ }
+
serial8250_resume_port(priv->line);
/* Paired with pm_runtime_resume_and_get() in omap8250_suspend() */
pm_runtime_mark_last_busy(dev);
@@ -1573,11 +1584,15 @@ static int omap8250_lost_context(struct uart_8250_port *up)
return 0;
}
+static void uart_write(struct omap8250_priv *priv, u32 reg, u32 val)
+{
+ writel(val, priv->membase + (reg << OMAP_UART_REGSHIFT));
+}
+
/* TODO: in future, this should happen via API in drivers/reset/ */
static int omap8250_soft_reset(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
- struct uart_8250_port *up = serial8250_get_port(priv->line);
int timeout = 100;
int sysc;
int syss;
@@ -1591,20 +1606,20 @@ static int omap8250_soft_reset(struct device *dev)
* needing omap8250_soft_reset() quirk. Do it in two writes as
* recommended in the comment for omap8250_update_scr().
*/
- serial_out(up, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1);
- serial_out(up, UART_OMAP_SCR,
+ uart_write(priv, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1);
+ uart_write(priv, UART_OMAP_SCR,
OMAP_UART_SCR_DMAMODE_1 | OMAP_UART_SCR_DMAMODE_CTL);
- sysc = serial_in(up, UART_OMAP_SYSC);
+ sysc = uart_read(priv, UART_OMAP_SYSC);
/* softreset the UART */
sysc |= OMAP_UART_SYSC_SOFTRESET;
- serial_out(up, UART_OMAP_SYSC, sysc);
+ uart_write(priv, UART_OMAP_SYSC, sysc);
/* By experiments, 1us enough for reset complete on AM335x */
do {
udelay(1);
- syss = serial_in(up, UART_OMAP_SYSS);
+ syss = uart_read(priv, UART_OMAP_SYSS);
} while (--timeout && !(syss & OMAP_UART_SYSS_RESETDONE));
if (!timeout) {
@@ -1618,23 +1633,10 @@ static int omap8250_soft_reset(struct device *dev)
static int omap8250_runtime_suspend(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
- struct uart_8250_port *up;
+ struct uart_8250_port *up = NULL;
- /* In case runtime-pm tries this before we are setup */
- if (!priv)
- return 0;
-
- up = serial8250_get_port(priv->line);
- /*
- * When using 'no_console_suspend', the console UART must not be
- * suspended. Since driver suspend is managed by runtime suspend,
- * preventing runtime suspend (by returning error) will keep device
- * active during suspend.
- */
- if (priv->is_suspending && !console_suspend_enabled) {
- if (uart_console(&up->port))
- return -EBUSY;
- }
+ if (priv->line >= 0)
+ up = serial8250_get_port(priv->line);
if (priv->habit & UART_ERRATA_CLOCK_DISABLE) {
int ret;
@@ -1643,13 +1645,15 @@ static int omap8250_runtime_suspend(struct device *dev)
if (ret)
return ret;
- /* Restore to UART mode after reset (for wakeup) */
- omap8250_update_mdr1(up, priv);
- /* Restore wakeup enable register */
- serial_out(up, UART_OMAP_WER, priv->wer);
+ if (up) {
+ /* Restore to UART mode after reset (for wakeup) */
+ omap8250_update_mdr1(up, priv);
+ /* Restore wakeup enable register */
+ serial_out(up, UART_OMAP_WER, priv->wer);
+ }
}
- if (up->dma && up->dma->rxchan)
+ if (up && up->dma && up->dma->rxchan)
omap_8250_rx_dma_flush(up);
priv->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE;
@@ -1661,18 +1665,15 @@ static int omap8250_runtime_suspend(struct device *dev)
static int omap8250_runtime_resume(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
- struct uart_8250_port *up;
-
- /* In case runtime-pm tries this before we are setup */
- if (!priv)
- return 0;
+ struct uart_8250_port *up = NULL;
- up = serial8250_get_port(priv->line);
+ if (priv->line >= 0)
+ up = serial8250_get_port(priv->line);
- if (omap8250_lost_context(up))
+ if (up && omap8250_lost_context(up))
omap8250_restore_regs(up);
- if (up->dma && up->dma->rxchan && !(priv->habit & UART_HAS_EFR2))
+ if (up && up->dma && up->dma->rxchan && !(priv->habit & UART_HAS_EFR2))
omap_8250_rx_dma(up);
priv->latency = priv->calc_latency;
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-01 16:58:50 +0000