diff options
Diffstat (limited to 'drivers/ata/pata_scc.c')
| -rw-r--r-- | drivers/ata/pata_scc.c | 63 |
1 files changed, 42 insertions, 21 deletions
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 63f6e2c7d56e..2d048ef25a5a 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -43,7 +43,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_scc" -#define DRV_VERSION "0.2" +#define DRV_VERSION "0.3" #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 @@ -258,6 +258,17 @@ static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev) JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]); } +unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask) +{ + /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */ + if (adev->class == ATA_DEV_ATAPI && + (mask & (0xE0 << ATA_SHIFT_UDMA))) { + printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME); + mask &= ~(0xE0 << ATA_SHIFT_UDMA); + } + return ata_pci_default_filter(adev, mask); +} + /** * scc_tf_load - send taskfile registers to host controller * @ap: Port to which output is sent @@ -726,22 +737,36 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) static u8 scc_bmdma_status (struct ata_port *ap) { - u8 host_stat; void __iomem *mmio = ap->ioaddr.bmdma_addr; - - host_stat = in_be32(mmio + SCC_DMA_STATUS); - - /* Workaround for PTERADD: emulate DMA_INTR when - * - IDE_STATUS[ERR] = 1 - * - INT_STATUS[INTRQ] = 1 - * - DMA_STATUS[IORACTA] = 1 - */ - if (!(host_stat & ATA_DMA_INTR)) { - u32 int_status = in_be32(mmio + SCC_DMA_INTST); - if (ata_altstatus(ap) & ATA_ERR && - int_status & INTSTS_INTRQ && - host_stat & ATA_DMA_ACTIVE) - host_stat |= ATA_DMA_INTR; + u8 host_stat = in_be32(mmio + SCC_DMA_STATUS); + u32 int_status = in_be32(mmio + SCC_DMA_INTST); + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + static int retry = 0; + + /* return if IOS_SS is cleared */ + if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START)) + return host_stat; + + /* errata A252,A308 workaround: Step4 */ + if ((ata_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ)) + return (host_stat | ATA_DMA_INTR); + + /* errata A308 workaround Step5 */ + if (int_status & INTSTS_IOIRQS) { + host_stat |= ATA_DMA_INTR; + + /* We don't check ATAPI DMA because it is limited to UDMA4 */ + if ((qc->tf.protocol == ATA_PROT_DMA && + qc->dev->xfer_mode > XFER_UDMA_4)) { + if (!(int_status & INTSTS_ACTEINT)) { + printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n", + ap->print_id); + host_stat |= ATA_DMA_ERR; + if (retry++) + ap->udma_mask &= ~(1 << qc->dev->xfer_mode); + } else + retry = 0; + } } return host_stat; @@ -894,10 +919,6 @@ static void scc_std_postreset (struct ata_port *ap, unsigned int *classes) { DPRINTK("ENTER\n"); - /* re-enable interrupts */ - if (!ap->ops->error_handler) - ap->ops->irq_on(ap); - /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) ap->ops->dev_select(ap, 1); @@ -1002,7 +1023,7 @@ static const struct ata_port_operations scc_pata_ops = { .port_disable = ata_port_disable, .set_piomode = scc_set_piomode, .set_dmamode = scc_set_dmamode, - .mode_filter = ata_pci_default_filter, + .mode_filter = scc_mode_filter, .tf_load = scc_tf_load, .tf_read = scc_tf_read, |