diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6q-apalis-eval.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6q-apalis-eval.dts | 188 |
1 files changed, 2 insertions, 186 deletions
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index b425d7a57209..a5b73f52c914 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -7,44 +7,13 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pwm/pwm.h> -#include "imx6q.dtsi" -#include "imx6qdl-apalis.dtsi" +#include "imx6q-apalis-eval.dtsi" / { model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board"; compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q", "fsl,imx6q"; - aliases { - i2c0 = &i2c1; - i2c1 = &i2c3; - i2c2 = &i2c2; - rtc0 = &rtc_i2c; - rtc1 = &snvs_rtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - reg_pcie_switch: regulator-pcie-switch { compatible = "regulator-fixed"; regulator-name = "pcie_switch"; @@ -55,15 +24,6 @@ enable-active-high; status = "okay"; }; - - reg_3v3_sw: regulator-3v3-sw { - compatible = "regulator-fixed"; - regulator-name = "3.3V_SW"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; &can1 { @@ -100,157 +60,22 @@ /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { - status = "okay"; - + /* PCIe Switch */ pcie-switch@58 { compatible = "plx,pex8605"; reg = <0x58>; }; - - /* M41T0M6 real time clock on carrier board */ - rtc_i2c: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -/* - * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier - * board) - */ -&i2c3 { - status = "okay"; - - adv7280: adv7280@21 { - compatible = "adv7280"; - reg = <0x21>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_csi0 &pinctrl_cam_mclk>; - clocks = <&clks IMX6QDL_CLK_CKO2>; - clock-names = "csi_mclk"; - DOVDD-supply = <®_3p3v>; - AVDD-supply = <®_3p3v>; - DVDD-supply = <®_3p3v>; - PVDD-supply = <®_3p3v>; - csi_id = <0>; - mclk = <24000000>; - mclk_source = <1>; - status = "okay"; - }; - - /* Video ADC on Analog Camera Module */ - adv7180: adv7180@21 { - compatible = "adv,adv7180"; - reg = <0x21>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_csi0 &pinctrl_cam_mclk>; - clocks = <&clks IMX6QDL_CLK_CKO2>; - clock-names = "csi_mclk"; - DOVDD-supply = <®_3p3v>; /* 3.3v */ - AVDD-supply = <®_3p3v>; /* 1.8v */ - DVDD-supply = <®_3p3v>; /* 1.8v */ - PVDD-supply = <®_3p3v>; /* 1.8v */ - csi_id = <0>; - mclk = <24000000>; - mclk_source = <1>; - cvbs = <1>; - status = "disabled"; - }; - - max9526: max9526@20 { - compatible = "maxim,max9526"; - reg = <0x20>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_csi0 &pinctrl_cam_mclk>; - clocks = <&clks IMX6QDL_CLK_CKO2>; - clock-names = "csi_mclk"; - DVDDIO-supply = <®_3p3v>; /* 3.3v */ - AVDD-supply = <®_3p3v>; /* 1.8v */ - DVDD-supply = <®_3p3v>; /* 1.8v */ - csi_id = <0>; - mclk = <24000000>; - mclk_source = <1>; - cvbs = <1>; - status = "okay"; - }; }; &pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_moci>; - /* active-high meaning opposite of regular PERST# active-low polarity */ - reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; vpcie-supply = <®_pcie_switch>; status = "okay"; }; -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&pwm4 { - status = "okay"; -}; - -®_usb_host_vbus { - status = "okay"; -}; - -®_usb_otg_vbus { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - &sound_spdif { status = "okay"; }; -&spdif { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -#if 0 - linux,rs485-enabled-at-boot-time; - rs485-rts-active-low; - rs485-rx-during-tx; -#endif -}; - -&uart4 { - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_host_vbus>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - status = "okay"; -}; - /* MMC1 */ &usdhc1 { status = "okay"; @@ -263,12 +88,3 @@ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; status = "okay"; }; - -&iomuxc { - /* Mux the Apalis GPIOs */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 - &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 - &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 - >; -}; |