Merge tag 'v4.9.220' into 4.9-2.3.x-imx

This is the 4.9.220 stable release

Conflicts:
	arch/arm/Kconfig.debug
	arch/arm/boot/dts/imx7s.dtsi
	arch/arm/mach-imx/common.h
	arch/arm/mach-imx/cpuidle-imx6q.c
	arch/arm/mach-imx/cpuidle-imx6sx.c
	arch/arm/mach-imx/suspend-imx6.S
	block/blk-core.c
	drivers/crypto/caam/caamalg.c
	drivers/crypto/mxs-dcp.c
	drivers/dma/imx-sdma.c
	drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
	drivers/input/keyboard/imx_keypad.c
	drivers/input/keyboard/snvs_pwrkey.c
	drivers/mmc/host/sdhci.c
	drivers/net/can/flexcan.c
	drivers/net/ethernet/freescale/fec_main.c
	drivers/net/phy/phy_device.c
	drivers/net/wireless/ath/ath10k/pci.c
	drivers/tty/serial/imx.c
	drivers/usb/dwc3/gadget.c
	drivers/usb/host/xhci.c
	include/linux/blkdev.h
	include/linux/cpu.h
	include/linux/platform_data/dma-imx-sdma.h
	kernel/cpu.c
	net/wireless/util.c
	sound/soc/fsl/Kconfig
	sound/soc/fsl/fsl_esai.c
	sound/soc/fsl/fsl_sai.c
	sound/soc/fsl/imx-sgtl5000.c

1 files changed, 12 insertions, 3 deletions

diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 67f6bd24a9d0..24795454d106 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -819,6 +819,10 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t,
 	}
 
 	status = spi_sync_locked(spi, &host->m);
+	if (status < 0) {
+		dev_dbg(&spi->dev, "read error %d\n", status);
+		return status;
+	}
 
 	if (host->dma_dev) {
 		dma_sync_single_for_cpu(host->dma_dev,
@@ -1150,17 +1154,22 @@ static void mmc_spi_initsequence(struct mmc_spi_host *host)
 	 * SPI protocol.  Another is that when chipselect is released while
 	 * the card returns BUSY status, the clock must issue several cycles
 	 * with chipselect high before the card will stop driving its output.
+	 *
+	 * SPI_CS_HIGH means "asserted" here. In some cases like when using
+	 * GPIOs for chip select, SPI_CS_HIGH is set but this will be logically
+	 * inverted by gpiolib, so if we want to ascertain to drive it high
+	 * we should toggle the default with an XOR as we do here.
 	 */
-	host->spi->mode |= SPI_CS_HIGH;
+	host->spi->mode ^= SPI_CS_HIGH;
 	if (spi_setup(host->spi) != 0) {
 		/* Just warn; most cards work without it. */
 		dev_warn(&host->spi->dev,
 				"can't change chip-select polarity\n");
-		host->spi->mode &= ~SPI_CS_HIGH;
+		host->spi->mode ^= SPI_CS_HIGH;
 	} else {
 		mmc_spi_readbytes(host, 18);
 
-		host->spi->mode &= ~SPI_CS_HIGH;
+		host->spi->mode ^= SPI_CS_HIGH;
 		if (spi_setup(host->spi) != 0) {
 			/* Wot, we can't get the same setup we had before? */
 			dev_err(&host->spi->dev,