/* * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #include #include #include #include #include #include #include "qemu_private.h" #include #include /* * The next 2 constants identify the extents of the code & RO data region. * These addresses are used by the MMU setup code and therefore they must be * page-aligned. It is the responsibility of the linker script to ensure that * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses. */ #define BL2_RO_BASE (unsigned long)(&__RO_START__) #define BL2_RO_LIMIT (unsigned long)(&__RO_END__) /******************************************************************************* * This structure represents the superset of information that is passed to * BL3-1, e.g. while passing control to it from BL2, bl31_params * and other platform specific params ******************************************************************************/ typedef struct bl2_to_bl31_params_mem { bl31_params_t bl31_params; image_info_t bl31_image_info; image_info_t bl32_image_info; image_info_t bl33_image_info; entry_point_info_t bl33_ep_info; entry_point_info_t bl32_ep_info; entry_point_info_t bl31_ep_info; } bl2_to_bl31_params_mem_t; static bl2_to_bl31_params_mem_t bl31_params_mem; /* Data structure which holds the extents of the trusted SRAM for BL2 */ static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE); meminfo_t *bl2_plat_sec_mem_layout(void) { return &bl2_tzram_layout; } /******************************************************************************* * This function assigns a pointer to the memory that the platform has kept * aside to pass platform specific and trusted firmware related information * to BL31. This memory is allocated by allocating memory to * bl2_to_bl31_params_mem_t structure which is a superset of all the * structure whose information is passed to BL31 * NOTE: This function should be called only once and should be done * before generating params to BL31 ******************************************************************************/ bl31_params_t *bl2_plat_get_bl31_params(void) { bl31_params_t *bl2_to_bl31_params; /* * Initialise the memory for all the arguments that needs to * be passed to BL3-1 */ zeromem(&bl31_params_mem, sizeof(bl2_to_bl31_params_mem_t)); /* Assign memory for TF related information */ bl2_to_bl31_params = &bl31_params_mem.bl31_params; SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0); /* Fill BL3-1 related information */ bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info; SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY, VERSION_1, 0); /* Fill BL3-2 related information */ bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info; SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP, VERSION_1, 0); bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info; SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY, VERSION_1, 0); /* Fill BL3-3 related information */ bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info; SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info, PARAM_EP, VERSION_1, 0); /* BL3-3 expects to receive the primary CPU MPID (through x0) */ bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr(); bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info; SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY, VERSION_1, 0); return bl2_to_bl31_params; } /* Flush the TF params and the TF plat params */ void bl2_plat_flush_bl31_params(void) { flush_dcache_range((unsigned long)&bl31_params_mem, sizeof(bl2_to_bl31_params_mem_t)); } /******************************************************************************* * This function returns a pointer to the shared memory that the platform * has kept to point to entry point information of BL31 to BL2 ******************************************************************************/ struct entry_point_info *bl2_plat_get_bl31_ep_info(void) { #if DEBUG bl31_params_mem.bl31_ep_info.args.arg1 = QEMU_BL31_PLAT_PARAM_VAL; #endif return &bl31_params_mem.bl31_ep_info; } void bl2_early_platform_setup(meminfo_t *mem_layout) { /* Initialize the console to provide early debug support */ console_init(PLAT_QEMU_BOOT_UART_BASE, PLAT_QEMU_BOOT_UART_CLK_IN_HZ, PLAT_QEMU_CONSOLE_BAUDRATE); /* Setup the BL2 memory layout */ bl2_tzram_layout = *mem_layout; plat_qemu_io_setup(); } static void security_setup(void) { /* * This is where a TrustZone address space controller and other * security related peripherals, would be configured. */ } static void update_dt(void) { int ret; void *fdt = (void *)(uintptr_t)PLAT_QEMU_DT_BASE; ret = fdt_open_into(fdt, fdt, PLAT_QEMU_DT_MAX_SIZE); if (ret < 0) { ERROR("Invalid Device Tree at %p: error %d\n", fdt, ret); return; } if (dt_add_psci_node(fdt)) { ERROR("Failed to add PSCI Device Tree node\n"); return; } if (dt_add_psci_cpu_enable_methods(fdt)) { ERROR("Failed to add PSCI cpu enable methods in Device Tree\n"); return; } ret = fdt_pack(fdt); if (ret < 0) ERROR("Failed to pack Device Tree at %p: error %d\n", fdt, ret); } void bl2_platform_setup(void) { security_setup(); update_dt(); /* TODO Initialize timer */ } void bl2_plat_arch_setup(void) { qemu_configure_mmu_el1(bl2_tzram_layout.total_base, bl2_tzram_layout.total_size, BL2_RO_BASE, BL2_RO_LIMIT, BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END); } /******************************************************************************* * Gets SPSR for BL32 entry ******************************************************************************/ static uint32_t qemu_get_spsr_for_bl32_entry(void) { /* * The Secure Payload Dispatcher service is responsible for * setting the SPSR prior to entry into the BL3-2 image. */ return 0; } /******************************************************************************* * Gets SPSR for BL33 entry ******************************************************************************/ static uint32_t qemu_get_spsr_for_bl33_entry(void) { unsigned int mode; uint32_t spsr; /* Figure out what mode we enter the non-secure world in */ mode = EL_IMPLEMENTED(2) ? MODE_EL2 : MODE_EL1; /* * TODO: Consider the possibility of specifying the SPSR in * the FIP ToC and allowing the platform to have a say as * well. */ spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); return spsr; } /******************************************************************************* * Before calling this function BL3-1 is loaded in memory and its entrypoint * is set by load_image. This is a placeholder for the platform to change * the entrypoint of BL3-1 and set SPSR and security state. * On ARM standard platforms we only set the security state of the entrypoint ******************************************************************************/ void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info, entry_point_info_t *bl31_ep_info) { SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE); bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); } /******************************************************************************* * Before calling this function BL3-2 is loaded in memory and its entrypoint * is set by load_image. This is a placeholder for the platform to change * the entrypoint of BL3-2 and set SPSR and security state. * On ARM standard platforms we only set the security state of the entrypoint ******************************************************************************/ void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info, entry_point_info_t *bl32_ep_info) { SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE); bl32_ep_info->spsr = qemu_get_spsr_for_bl32_entry(); } /******************************************************************************* * Before calling this function BL3-3 is loaded in memory and its entrypoint * is set by load_image. This is a placeholder for the platform to change * the entrypoint of BL3-3 and set SPSR and security state. * On ARM standard platforms we only set the security state of the entrypoint ******************************************************************************/ void bl2_plat_set_bl33_ep_info(image_info_t *image, entry_point_info_t *bl33_ep_info) { SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE); bl33_ep_info->spsr = qemu_get_spsr_for_bl33_entry(); } /******************************************************************************* * Populate the extents of memory available for loading BL32 ******************************************************************************/ void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo) { /* * Populate the extents of memory available for loading BL32. */ bl32_meminfo->total_base = BL32_BASE; bl32_meminfo->free_base = BL32_BASE; bl32_meminfo->total_size = (BL32_MEM_BASE + BL32_MEM_SIZE) - BL32_BASE; bl32_meminfo->free_size = (BL32_MEM_BASE + BL32_MEM_SIZE) - BL32_BASE; } /******************************************************************************* * Populate the extents of memory available for loading BL33 ******************************************************************************/ void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo) { bl33_meminfo->total_base = NS_DRAM0_BASE; bl33_meminfo->total_size = NS_DRAM0_SIZE; bl33_meminfo->free_base = NS_DRAM0_BASE; bl33_meminfo->free_size = NS_DRAM0_SIZE; } unsigned long plat_get_ns_image_entrypoint(void) { return NS_IMAGE_OFFSET; }