From 452031e65816a9fa6b4314cc0f2cdfc16c5b40a9 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 27 Dec 2018 20:31:22 +0100 Subject: rcar_gen3: drivers: scif: Use TEND flag for transmission end detection Use the SCIF SCFSR:TEND bit to check that all data were transmitted by the SCIF and that there are no more valid data to transmit in the FIFO. Signed-off-by: Marek Vasut --- drivers/renesas/rcar/scif/scif.S | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers/renesas') diff --git a/drivers/renesas/rcar/scif/scif.S b/drivers/renesas/rcar/scif/scif.S index 1cc0d590..09dc90b8 100644 --- a/drivers/renesas/rcar/scif/scif.S +++ b/drivers/renesas/rcar/scif/scif.S @@ -75,6 +75,8 @@ #if SCIF_CLK == SCIF_EXTARNAL_CLK #define SCSCR_CKE_INT_CLK (SCSCR_CKE_BRG) #else +#define SCFSR_TEND_MASK (1 << 6) +#define SCFSR_TEND_TRANS_END (0x0040) #define SCSCR_CKE_INT_CLK (SCSCR_CKE_INT) #endif #define SCFSR_INIT_DATA (0x0000) @@ -281,6 +283,11 @@ func console_core_putc bcs 2b strb w0, [x1, #SCIF_SCFTDR] + /* Clear TEND flag */ + ldrh w2, [x1, #SCIF_SCFSR] + and w2, w2, #~SCFSR_TEND_MASK + strh w2, [x1, #SCIF_SCFSR] + ret endfunc console_core_putc @@ -309,16 +316,12 @@ endfunc console_getc func console_flush ldr x0, =SCIF2_BASE 1: - ldrh w1, [x0, #SCIF_SCFDR] - ubfx w1, w1, #8, #5 - cmp w1, #0 + /* Check TEND flag */ + ldrh w1, [x0, #SCIF_SCFSR] + and w1, w1, #SCFSR_TEND_MASK + cmp w1, #SCFSR_TEND_TRANS_END bne 1b - mov x0, #100 - mov x3, x30 - bl rcar_micro_delay - mov x30, x3 - ldr x0, =SCIF2_BASE ldrh w1, [x0, #SCIF_SCSCR] and w1, w1, #~(SCSCR_TE_EN + SCSCR_RE_EN) -- cgit v1.2.3