| Age | Commit message (Collapse) | Author |
|---|
|
when the DSP LPA buffer is in OCRAM, dram can be put into retention to save
power. This support is missed when removing the i.MX8MP A0 support, so add
it back.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
|
|
Current reset uses WDOG timeout function and default timeout
value is set to 0.5 second. However, it is better to trigger
reset immediately to speed up reboot process as well as prevent
the scenario of WDOG_B toggling later than CPU reset and PMIC
does NOT reset.
Set the WDE bit when IMX_WDOG_B_RESET is not enabled, or
reboot will fail.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
|
|
Add the M core low power audio support on i.MX8M.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
|
|
Enable the NOC wrapper power down support for SoC that
have switchable NOC power domain.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
|
|
This new workaround takes advantage of the per core IMR registers in GPC in
order to unmask the IRQ0, still generated by the 12bit in IOMUX_GPR register
(which now remains always set), so it can only wake up one core at the time.
Also, this entire workaround has now been moved here in TF-A, allowing the
kernel side to be minimal.
Another advantage this workaround brings is the removal of the 50us delay
(which was necessary before in gic_raise_softirq in kernel) by allowing the
core that is waking up to mask his own IRQ0 in the suspend finish callback.
One important change here is the way the cores are woken up in
dram_dvfs_handler. Since the wake up mechanism has changed from asserting the
12th bit in IOMUX_GPR and leaving the IMR1 1st bit on for each core to exactly
the reverse, that is, leaving the IOMUX_GPR 12th bit always set and then
masking/unmasking the IMR1 1st bit for each independent core, we need to use
the imx_gpc_core_wake to wake up the cores.
Also, the 50us udelay is moved to TF-A (inside imx_pwr_domain_off) from kernel
(gic_raise_softirq), since the new cpuidle workaround does not need it in order
to clean the IOMUX_GPC 12bit. For now, the udelay seems to be still needed
in order to delay the affinity info OFF for the dying core. This is something
that needs further investigation.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
|
|
Add PLL power down override & bypass support when
system enter DSM mode.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
|
|
Keep A53 PLAT(SCU) power domain on in wait mode(ret).
RBC count only need to be set in PLAT OFF mode, so
change it accordingly.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
|
|
Enable dram retention support on i.MX8MM.
Change-Id: I76ada615d386602e551d572ff4e60ee19bb8e418
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
|
|
for the i.MX8M SOCs, part of the code for gpc
and PSCI implementation can be reused and make it
common for all these SoCs. this patch extracts
the common part for reuse.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
|
