diff options
Diffstat (limited to 'plat/imx/imx8m/ddr/dram_retention.c')
| -rw-r--r-- | plat/imx/imx8m/ddr/dram_retention.c | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/plat/imx/imx8m/ddr/dram_retention.c b/plat/imx/imx8m/ddr/dram_retention.c new file mode 100644 index 00000000..91d887fe --- /dev/null +++ b/plat/imx/imx8m/ddr/dram_retention.c @@ -0,0 +1,180 @@ +/* + * Copyright 2018-2019 NXP + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <stdbool.h> +#include <lib/mmio.h> + +#include <dram.h> +#include <platform_def.h> + +#define SRC_DDR1_RCR (IMX_SRC_BASE + 0x1000) +#define SRC_DDR2_RCR (IMX_SRC_BASE + 0x1004) + +#define PU_PGC_UP_TRG 0xf8 +#define PU_PGC_DN_TRG 0x104 +#define GPC_PU_PWRHSK (IMX_GPC_BASE + 0x01FC) +#define CCM_SRC_CTRL_OFFSET (IMX_CCM_BASE + 0x800) +#define CCM_CCGR_OFFSET (IMX_CCM_BASE + 0x4000) +#define CCM_SRC_CTRL(n) (CCM_SRC_CTRL_OFFSET + 0x10 * (n)) +#define CCM_CCGR(n) (CCM_CCGR_OFFSET + 0x10 * (n)) + +#define DRAM_PLL_CTRL (IMX_ANAMIX_BASE + 0x50) + +void dram_enter_retention(void) +{ + /* Wait DBGCAM to be empty */ + while (mmio_read_32(DDRC_DBGCAM(0)) != 0x36000000) + ; + + /* Block AXI ports from taking anymore transactions */ + mmio_write_32(DDRC_PCTRL_0(0), 0x0); + /* Wait until all AXI ports are idle */ + while (mmio_read_32(DDRC_PSTAT(0)) & 0x10001) + ; + + /* Enter self refresh */ + mmio_write_32(DDRC_PWRCTL(0), 0xaa); + + /* LPDDR4 & DDR4/DDR3L need to check different status */ + if (dram_info.dram_type == DDRC_LPDDR4) + while(0x223 != (mmio_read_32(DDRC_STAT(0)) & 0x33f)) + ; + else + while (0x23 != (mmio_read_32(DDRC_STAT(0)) & 0x3f)) + ; + + mmio_write_32(DDRC_DFIMISC(0), 0x0); + mmio_write_32(DDRC_SWCTL(0), 0x0); + mmio_write_32(DDRC_DFIMISC(0), 0x1f00); + mmio_write_32(DDRC_DFIMISC(0), 0x1f20); + + while (mmio_read_32(DDRC_DFISTAT(0)) & 0x1) + ; + + mmio_write_32(DDRC_DFIMISC(0), 0x1f00); + /* wait DFISTAT.dfi_init_complete to 1 */ + while (!(mmio_read_32(DDRC_DFISTAT(0)) & 0x1)) + ; + + mmio_write_32(DDRC_SWCTL(0), 0x1); + + /* should check PhyInLP3 pub reg */ + dwc_ddrphy_apb_wr(0xd0000, 0x0); + if (!(dwc_ddrphy_apb_rd(0x90028) & 0x1)) + INFO("PhyInLP3 = 1\n"); + dwc_ddrphy_apb_wr(0xd0000, 0x1); + +#if defined(PLAT_imx8mq) + /* pwrdnreqn_async adbm/adbs of ddr */ + mmio_clrbits_32(GPC_PU_PWRHSK, BIT(1)); + while (mmio_read_32(GPC_PU_PWRHSK) & BIT(18)) + ; + mmio_setbits_32(GPC_PU_PWRHSK, BIT(1)); +#else + /* pwrdnreqn_async adbm/adbs of ddr */ + mmio_clrbits_32(GPC_PU_PWRHSK, BIT(2)); + while (mmio_read_32(GPC_PU_PWRHSK) & BIT(20)) + ; + mmio_setbits_32(GPC_PU_PWRHSK, BIT(2)); +#endif + /* remove PowerOk */ + mmio_write_32(SRC_DDR1_RCR, 0x8F000008); + + mmio_write_32(CCM_CCGR(5), 0); + mmio_write_32(CCM_SRC_CTRL(15), 2); + + /* enable the phy iso */ + mmio_setbits_32(IMX_GPC_BASE + 0xd40, 1); + mmio_setbits_32(IMX_GPC_BASE + PU_PGC_DN_TRG, BIT(5)); + + VERBOSE("dram enter retention\n"); +} + +void dram_exit_retention(void) +{ + VERBOSE("dram exit retention\n"); + /* assert all reset */ +#if defined(PLAT_imx8mq) + mmio_write_32(SRC_DDR2_RCR, 0x8F000003); + mmio_write_32(SRC_DDR1_RCR, 0x8F00000F); + mmio_write_32(SRC_DDR2_RCR, 0x8F000000); +#else + mmio_write_32(SRC_DDR1_RCR, 0x8F00001F); + mmio_write_32(SRC_DDR1_RCR, 0x8F00000F); +#endif + mmio_write_32(CCM_CCGR(5), 2); + mmio_write_32(CCM_SRC_CTRL(15), 2); + + /* disable iso */ + mmio_setbits_32(IMX_GPC_BASE + PU_PGC_UP_TRG, BIT(5)); + mmio_write_32(SRC_DDR1_RCR, 0x8F000006); + + /* wait dram pll locked */ + while(!(mmio_read_32(DRAM_PLL_CTRL) & BIT(31))) + ; + + /* ddrc re-init */ + dram_umctl2_init(dram_info.timing_info); + + /* + * Skips the DRAM init routine and starts up in selfrefresh mode + * Program INIT0.skip_dram_init = 2'b11 + */ + mmio_setbits_32(DDRC_INIT0(0), 0xc0000000); + /* Keeps the controller in self-refresh mode */ + mmio_write_32(DDRC_PWRCTL(0), 0xaa); + mmio_write_32(DDRC_DBG1(0), 0x0); + mmio_write_32(SRC_DDR1_RCR, 0x8F000004); + mmio_write_32(SRC_DDR1_RCR, 0x8F000000); + + /* before write Dynamic reg, sw_done should be 0 */ + mmio_write_32(DDRC_SWCTL(0), 0x0); + if (dram_info.dram_type == DDRC_LPDDR4) + mmio_write_32(DDRC_DDR_SS_GPR0, 0x01); /*LPDDR4 mode */ + mmio_write_32(DDRC_DFIMISC(0), 0x0); + + /* dram phy re-init */ + dram_phy_init(dram_info.timing_info); + + /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ + dwc_ddrphy_apb_wr(0xd0000, 0x0); + while (dwc_ddrphy_apb_rd(0x20097)) + ; + dwc_ddrphy_apb_wr(0xd0000, 0x1); + + /* before write Dynamic reg, sw_done should be 0 */ + mmio_write_32(DDRC_SWCTL(0), 0x0); + mmio_write_32(DDRC_DFIMISC(0), 0x20); + /* wait DFISTAT.dfi_init_complete to 1 */ + while (!(mmio_read_32(DDRC_DFISTAT(0)) & 0x1)) + ; + + /* clear DFIMISC.dfi_init_start */ + mmio_write_32(DDRC_DFIMISC(0), 0x0); + /* set DFIMISC.dfi_init_complete_en */ + mmio_write_32(DDRC_DFIMISC(0), 0x1); + + /* set SWCTL.sw_done to enable quasi-dynamic register programming */ + mmio_write_32(DDRC_SWCTL(0), 0x1); + /* wait SWSTAT.sw_done_ack to 1 */ + while (!(mmio_read_32(DDRC_SWSTAT(0)) & 0x1)) + ; + + mmio_write_32(DDRC_PWRCTL(0), 0x88); + /* wait STAT to normal state */ + while (0x1 != (mmio_read_32(DDRC_STAT(0)) & 0x7)) + ; + + mmio_write_32(DDRC_PCTRL_0(0), 0x1); + /* dis_auto-refresh is set to 0 */ + mmio_write_32(DDRC_RFSHCTL3(0), 0x0); + + /* should check PhyInLP3 pub reg */ + dwc_ddrphy_apb_wr(0xd0000, 0x0); + if (!(dwc_ddrphy_apb_rd(0x90028) & 0x1)) + VERBOSE("PHYInLP3 = 0\n"); + dwc_ddrphy_apb_wr(0xd0000, 0x1); +} |