diff options
Diffstat (limited to 'plat/freescale/imx8mq/imx8m_bl31_setup.c')
-rw-r--r-- | plat/freescale/imx8mq/imx8m_bl31_setup.c | 203 |
1 files changed, 203 insertions, 0 deletions
diff --git a/plat/freescale/imx8mq/imx8m_bl31_setup.c b/plat/freescale/imx8mq/imx8m_bl31_setup.c new file mode 100644 index 00000000..9bc2fbbc --- /dev/null +++ b/plat/freescale/imx8mq/imx8m_bl31_setup.c @@ -0,0 +1,203 @@ +/* + * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. + * Copyright 2017 NXP + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include <arch_helpers.h> +#include <assert.h> +#include <bl_common.h> +#include <console.h> +#include <context.h> +#include <context_mgmt.h> +#include <debug.h> +#include <mmio.h> +#include <platform.h> +#include <platform_def.h> +#include <plat_imx8.h> +#include <xlat_tables.h> +#include <soc.h> + +/* linker defined symbols */ +extern unsigned long __RO_START__; +extern unsigned long __RO_END__; +extern unsigned long __BL31_END__; + +#if USE_COHERENT_MEM +extern unsigned long __COHERENT_RAM_START__; +extern unsigned long __COHERENT_RAM_END__; + +#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__) +#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__) +#endif + +#define BL31_RO_BASE (unsigned long)(&__RO_START__) +#define BL31_RO_LIMIT (unsigned long)(&__RO_END__) +#define BL31_END (unsigned long)(&__BL31_END__) + +static entry_point_info_t bl32_image_ep_info; +static entry_point_info_t bl33_image_ep_info; + +/* get SPSR for BL33 entry */ +static uint32_t get_spsr_for_bl33_entry(void) +{ + unsigned long el_status; + unsigned long mode; + uint32_t spsr; + + /* figure out what mode we enter the non-secure world */ + el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT; + el_status &= ID_AA64PFR0_ELX_MASK; + + mode = (el_status) ? MODE_EL2 : MODE_EL1; + + spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS); + return spsr; +} + +#define SCTR_BASE_ADDR 0x306c0000 +#define CNTFID0_OFF 0x20 +#define CNTFID1_OFF 0x24 + +#define SC_CNTCR_ENABLE (1 << 0) +#define SC_CNTCR_HDBG (1 << 1) +#define SC_CNTCR_FREQ0 (1 << 8) +#define SC_CNTCR_FREQ1 (1 << 9) + +unsigned int freq; + +void system_counter_init(void) +{ + int val; + + /* Update with accurate clock frequency */ + freq = mmio_read_32(SCTR_BASE_ADDR + CNTFID0_OFF); + + val = mmio_read_32(SCTR_BASE_ADDR + CNTCR_OFF); + val &= ~(SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1); + val |= SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG; + mmio_write_32(SCTR_BASE_ADDR + CNTCR_OFF, val); +} + +void bl31_early_platform_setup(bl31_params_t *from_bl2, + void *plat_params_from_bl2) +{ + int i; + /* enable CSU NS access permission */ + for (i = 0; i < 64; i++) { + mmio_write_32(0x303e0000 + i * 4, 0xffffffff); + } + + mmio_write_32(0x303a00ec, 0x0000ffff); + /* Power up VPU, DISP, GPU etc */ + mmio_write_32(0x303a00f8, 0x3fef); + + /* config the AIPSTZ1 */ + mmio_write_32(0x301f0000, 0x77777777); + mmio_write_32(0x301f0004, 0x77777777); + mmio_write_32(0x301f0040, 0x0); + mmio_write_32(0x301f0044, 0x0); + mmio_write_32(0x301f0048, 0x0); + mmio_write_32(0x301f004c, 0x0); + mmio_write_32(0x301f0050, 0x0); + + /* config the AIPSTZ3 */ + mmio_write_32(0x309f0000, 0x77777777); + mmio_write_32(0x309f0004, 0x77777777); + mmio_write_32(0x309f0040, 0x0); + mmio_write_32(0x309f0044, 0x0); + mmio_write_32(0x309f0048, 0x0); + mmio_write_32(0x309f004c, 0x0); + mmio_write_32(0x309f0050, 0x0); + + /* enable the system counter */ + system_counter_init(); + + /* + * tell BL3-1 where the non-secure software image is located + * and the entry state information. + */ + bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET; + bl33_image_ep_info.spsr = get_spsr_for_bl33_entry(); + SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE); +} + +void bl31_plat_arch_setup(void) +{ + /* add the mmap */ + mmap_add_region(BL31_BASE, BL31_BASE, 0x10000, + MT_MEMORY | MT_RW); + mmap_add_region(BL31_BASE, BL31_BASE, BL31_RO_LIMIT - BL31_RO_BASE, + MT_MEMORY | MT_RO); + mmap_add_region(IMX_BOOT_UART_BASE, IMX_BOOT_UART_BASE, + 0x1000, MT_DEVICE | MT_RW); + mmap_add_region(IMX_SRC_BASE, IMX_SRC_BASE, + 0x1000, MT_DEVICE | MT_RW); + mmap_add_region(IMX_GPC_BASE, IMX_GPC_BASE, 0x1000, MT_DEVICE | MT_RW); + mmap_add_region(IMX_ANAMIX_BASE, IMX_ANAMIX_BASE, 0x1000, MT_DEVICE | MT_RW); + mmap_add_region(PLAT_GICD_BASE, PLAT_GICD_BASE, 0x80000, + MT_DEVICE | MT_RW); + mmap_add_region(PLAT_GICR_BASE, PLAT_GICR_BASE, 0x80000, + MT_DEVICE | MT_RW); +#if USE_COHERENT_MEM + mmap_add_region(BL31_COHERENT_RAM_BASE, BL31_COHERENT_RAM_BASE, + BL31_COHERENT_RAM_LIMIT - BL31_COHERENT_RAM_BASE, + MT_DEVICE | MT_RW); +#endif + + /* setup xlat table */ + init_xlat_tables(); + + /* enable the MMU */ + enable_mmu_el3(0); +} + +void bl31_platform_setup(void) +{ + /* init the GICv3 cpu and distributor interface */ + plat_gic_driver_init(); + plat_gic_init(); + + /* gpc init */ + imx_gpc_init(); +} + +entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type) +{ + if (type == NON_SECURE) + return &bl33_image_ep_info; + if (type == SECURE) + return &bl32_image_ep_info; + + return NULL; +} + +unsigned int plat_get_syscnt_freq2(void) +{ + return freq; +} |