diff options
Diffstat (limited to 'docs/plat/hikey960.md')
-rw-r--r-- | docs/plat/hikey960.md | 215 |
1 files changed, 120 insertions, 95 deletions
diff --git a/docs/plat/hikey960.md b/docs/plat/hikey960.md index 786a54b9..8442a189 100644 --- a/docs/plat/hikey960.md +++ b/docs/plat/hikey960.md @@ -1,9 +1,9 @@ Description ==================== - HiKey960 is one of 96boards. Hisilicon Hi3660 processor is installed on HiKey960. +HiKey960 is one of 96boards. Hisilicon Hi3660 processor is installed on HiKey960. - More information are listed in [link](http://www.96boards.org/documentation/ConsumerEdition/HiKey960/README.md). +More information are listed in [link](http://www.96boards.org/documentation/ConsumerEdition/HiKey960/README.md). How to build @@ -12,123 +12,148 @@ How to build 1. Code Locations ----------------- - * ARM Trusted Firmware: - [link](https://github.com/ARM-software/arm-trusted-firmware) + * ARM Trusted Firmware: + [link](https://github.com/ARM-software/arm-trusted-firmware) - * edk2: - [link](https://github.com/96boards-hikey/edk2/tree/testing/hikey960_v2.5) + * edk2: + [link](https://github.com/96boards-hikey/edk2/tree/testing/hikey960_v2.5) - * OpenPlatformPkg: - [link](https://github.com/96boards-hikey/OpenPlatformPkg/tree/testing/hikey960_v1.3.4) + * OpenPlatformPkg: + [link](https://github.com/96boards-hikey/OpenPlatformPkg/tree/testing/hikey960_v1.3.4) - * l-loader: - [link](https://github.com/96boards-hikey/l-loader/tree/testing/hikey960_v1.2) + * l-loader: + [link](https://github.com/96boards-hikey/l-loader/tree/testing/hikey960_v1.2) - * uefi-tools: - [link](https://github.com/96boards-hikey/uefi-tools/tree/hikey960_v1) + * uefi-tools: + [link](https://github.com/96boards-hikey/uefi-tools/tree/hikey960_v1) 2. Build Procedure ------------------ - * Fetch all the above 5 repositories into local host. - Make all the repositories in the same ${BUILD_PATH}. - - * Create the symbol link to OpenPlatformPkg in edk2. - <br>`$cd ${BUILD_PATH}/edk2`</br> - <br>`$ln -sf ../OpenPlatformPkg`</br> - - * Prepare AARCH64 toolchain. - - * If your hikey960 hardware is v1, update _uefi-tools/platform.config_ first. _(optional)_ - <br>__Uncomment the below sentence. Otherwise, UEFI can't output messages on serial - console on hikey960 v1.__</br> - <br>`BUILDFLAGS=-DSERIAL_BASE=0xFDF05000`</br> - <br>If your hikey960 hardware is v2 or newer, nothing to do.</br> - - * Build it as debug mode. Create script file for build. - <br>`BUILD_OPTION=DEBUG`</br> - <br>`export AARCH64_TOOLCHAIN=GCC48`</br> - <br>`export UEFI_TOOLS_DIR=${BUILD_PATH}/uefi-tools`<br> - <br>`export EDK2_DIR=${BUILD_PATH}/edk2`</br> - <br>`EDK2_OUTPUT_DIR=${EDK2_DIR}/Build/HiKey960/${BUILD_OPTION}_${AARCH64_TOOLCHAIN}`</br> - <br>`cd ${EDK2_DIR}`</br> - <br>`# Build UEFI & ARM Trust Firmware`</br> - <br>`${UEFI_TOOLS_DIR}/uefi-build.sh -b ${BUILD_OPTION} -a ../arm-trusted-firmware hikey960`</br> - <br>`# Generate l-loader.bin`</br> - <br>`cd ${BUILD_PATH}/l-loader`</br> - <br>`ln -sf ${EDK2_OUTPUT_DIR}/FV/bl1.bin`</br> - <br>`ln -sf ${EDK2_OUTPUT_DIR}/FV/fip.bin`</br> - <br>`ln -sf ${EDK2_OUTPUT_DIR}/FV/BL33_AP_UEFI.fd`</br> - <br>`python gen_loader.py -o l-loader.bin --img_bl1=bl1.bin --img_ns_bl1u=BL33_AP_UEFI.fd`</br> - - * Generate partition table. - <br>_Make sure that you're using the sgdisk in the l-loader directory._</br> - <br>`$PTABLE=aosp-32g SECTOR_SIZE=4096 SGDISK=./sgdisk bash -x generate_ptable.sh`</br> + * Fetch all the above 5 repositories into local host. + Make all the repositories in the same ${BUILD_PATH}. + + * Create the symbol link to OpenPlatformPkg in edk2. + ```shell + $cd ${BUILD_PATH}/edk2 + $ln -sf ../OpenPlatformPkg + ``` + + * Prepare AARCH64 toolchain. + + * If your hikey960 hardware is v1, update _uefi-tools/platform.config_ first. _(optional)_ + __Uncomment the below sentence. Otherwise, UEFI can't output messages on serial + console on hikey960 v1.__ + ```shell + BUILDFLAGS=-DSERIAL_BASE=0xFDF05000 + ``` + If your hikey960 hardware is v2 or newer, nothing to do. + + * Build it as debug mode. Create script file for build. + ```shell + BUILD_OPTION=DEBUG + export AARCH64_TOOLCHAIN=GCC48 + export UEFI_TOOLS_DIR=${BUILD_PATH}/uefi-tools + export EDK2_DIR=${BUILD_PATH}/edk2 + EDK2_OUTPUT_DIR=${EDK2_DIR}/Build/HiKey960/${BUILD_OPTION}_${AARCH64_TOOLCHAIN} + cd ${EDK2_DIR} + # Build UEFI & ARM Trust Firmware + ${UEFI_TOOLS_DIR}/uefi-build.sh -b ${BUILD_OPTION} -a ../arm-trusted-firmware hikey960 + # Generate l-loader.bin + cd ${BUILD_PATH}/l-loader + ln -sf ${EDK2_OUTPUT_DIR}/FV/bl1.bin + ln -sf ${EDK2_OUTPUT_DIR}/FV/fip.bin + ln -sf ${EDK2_OUTPUT_DIR}/FV/BL33_AP_UEFI.fd + python gen_loader.py -o l-loader.bin --img_bl1=bl1.bin --img_ns_bl1u=BL33_AP_UEFI.fd + ``` + + * Generate partition table. + _Make sure that you're using the sgdisk in the l-loader directory._ + ```shell + $PTABLE=aosp-32g SECTOR_SIZE=4096 SGDISK=./sgdisk bash -x generate_ptable.sh + ``` 3. Setup Console ---------------- - * Install ser2net. Use telnet as the console since UEFI will output window - that fails to display in minicom. - <br>`$sudo apt-get install ser2net`</br> + * Install ser2net. Use telnet as the console since UEFI will output window + that fails to display in minicom. + ```shell + $sudo apt-get install ser2net + ``` - * Configure ser2net. - <br>`$sudo vi /etc/ser2net.conf`</br> - <br>Append one line for serial-over-USB in below.</br> - <br>_#ser2net.conf_</br> - <br>`2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner`</br> + * Configure ser2net. + ```shell + $sudo vi /etc/ser2net.conf + ``` + Append one line for serial-over-USB in _#ser2net.conf_ + ``` + 2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner + ``` - * Open the console. - <br>`$telnet localhost 2004`</br> - <br>And you could open the console remotely, too.</br> + * Open the console. + ```shell + $telnet localhost 2004 + ``` + And you could open the console remotely, too. 4. Boot UEFI in recovery mode ----------------------------- - * Fetch that are used in recovery mode. The code location is in below. - [link](https://github.com/96boards-hikey/tools-images-hikey960) - - * Generate l-loader.bin. - <br>`$cd tools-images-hikey960`</br> - <br>`$ln -sf ${BUILD_PATH}/l-loader/l-loader.bin`</br> - - * Prepare config file. - <br>_$vi config_</br> - <br>_# The content of config file_</br> - <br>`./sec_user_xloader.img 0x00020000`</br> - <br>`./sec_uce_boot.img 0x6A908000`</br> - <br>`./l-loader.bin 0x1AC00000`</br> - - * Remove the modemmanager package. This package may causes hikey_idt tool failure. - <br>`$sudo apt-get purge modemmanager`</br> - - * Run the command to download l-loader.bin into HiKey960. - <br>`$sudo ./hikey_idt -c config -p /dev/ttyUSB1`</br> - - * UEFI running in recovery mode. - <br>When prompt '.' is displayed on console, press hotkey 'f' in keyboard. Then Android fastboot app is running.</br> - <br>The timeout of prompt '.' is 10 seconds.</br> - - * Update images. - <br>`$sudo fastboot flash ptable prm_ptable.img`</br> - <br>`$sudo fastboot flash xloader sec_xloader.img`</br> - <br>`$sudo fastboot flash fastboot l-loader.bin`</br> - <br>`$sudo fastboot flash fip fip.bin`</br> - <br>`$sudo fastboot flash boot boot.img`</br> - <br>`$sudo fastboot flash cache cache.img`</br> - <br>`$sudo fastboot flash system system.img`</br> - <br>`$sudo fastboot flash userdata userdata.img`</br> - - * Notice: UEFI could also boot kernel in recovery mode, but BL31 isn't loaded in - recovery mode. + * Fetch that are used in recovery mode. The code location is in below. + [link](https://github.com/96boards-hikey/tools-images-hikey960) + + * Generate l-loader.bin. + ```shell + $cd tools-images-hikey960 + $ln -sf ${BUILD_PATH}/l-loader/l-loader.bin + ``` + + * Prepare config file. + ```shell + $vi config + # The content of config file + ./sec_user_xloader.img 0x00020000 + ./sec_uce_boot.img 0x6A908000 + ./l-loader.bin 0x1AC00000 + ``` + + * Remove the modemmanager package. This package may causes hikey_idt tool failure. + ```shell + $sudo apt-get purge modemmanager + ``` + + * Run the command to download l-loader.bin into HiKey960. + ```shell + $sudo ./hikey_idt -c config -p /dev/ttyUSB1 + ``` + + * UEFI running in recovery mode. + When prompt '.' is displayed on console, press hotkey 'f' in keyboard. Then Android fastboot app is running. + The timeout of prompt '.' is 10 seconds. + + * Update images. + ```shell + $sudo fastboot flash ptable prm_ptable.img + $sudo fastboot flash xloader sec_xloader.img + $sudo fastboot flash fastboot l-loader.bin + $sudo fastboot flash fip fip.bin + $sudo fastboot flash boot boot.img + $sudo fastboot flash cache cache.img + $sudo fastboot flash system system.img + $sudo fastboot flash userdata userdata.img + ``` + + * Notice: UEFI could also boot kernel in recovery mode, but BL31 isn't loaded in + recovery mode. 5. Boot UEFI in normal mode ----------------------------- - * Make sure "Boot Mode" switch is OFF for normal boot mode. Then power on HiKey960. + * Make sure "Boot Mode" switch is OFF for normal boot mode. Then power on HiKey960. - * Reference [link](https://github.com/96boards-hikey/tools-images-hikey960/blob/master/build-from-source/README-ATF-UEFI-build-from-source.md) + * Reference [link](https://github.com/96boards-hikey/tools-images-hikey960/blob/master/build-from-source/README-ATF-UEFI-build-from-source.md) |