diff options
Diffstat (limited to 'docs/plat/hikey.md')
-rw-r--r-- | docs/plat/hikey.md | 123 |
1 files changed, 0 insertions, 123 deletions
diff --git a/docs/plat/hikey.md b/docs/plat/hikey.md deleted file mode 100644 index a5e592bb..00000000 --- a/docs/plat/hikey.md +++ /dev/null @@ -1,123 +0,0 @@ - -Description -==================== - HiKey is one of 96boards. Hisilicon Kirin6220 processor is installed on HiKey. - - More information are listed in [link](https://github.com/96boards/documentation/blob/master/ConsumerEdition/HiKey/Quickstart/README.md). - - -How to build -==================== - -1. Code Locations ------------------ - - * ARM Trusted Firmware: - [link](https://github.com/ARM-software/arm-trusted-firmware) - - * edk2: - [link](https://github.com/96boards-hikey/edk2/tree/testing/hikey960_v2.5) - - * OpenPlatformPkg: - [link](https://github.com/96boards-hikey/OpenPlatformPkg/tree/testing/hikey960_v1.3.4) - - * l-loader: - [link](https://github.com/96boards-hikey/l-loader/tree/testing/hikey960_v1.2) - - * uefi-tools: - [link](https://github.com/96boards-hikey/uefi-tools/tree/testing/hikey960_v1) - - * atf-fastboot: - [link](https://github.com/96boards-hikey/atf-fastboot/tree/master) - - -2. Build Procedure ------------------- - - * Fetch all the above repositories into local host. - Make all the repositories in the same ${BUILD_PATH}. - - * Create the symbol link to OpenPlatformPkg in edk2. - <br>`$cd ${BUILD_PATH}/edk2`</br> - <br>`$ln -sf ../OpenPlatformPkg`</br> - - * Prepare AARCH64 && AARCH32 toolchain. Prepare python. - - * If your hikey hardware is built by CircuitCo, update _uefi-tools/platform.config_ first. _(optional)_ - <br>__Uncomment the below sentence. Otherwise, UEFI can't output messages on serial - console on hikey.__</br> - <br>`BUILDFLAGS=-DSERIAL_BASE=0xF8015000`</br> - <br>If your hikey hardware is built by LeMarker, nothing to do.</br> - - * Build it as debug mode. Create your own build script file or you could refer to __build_uefi.sh__ in l-loader git repository. - <br>`BUILD_OPTION=DEBUG`</br> - <br>`export AARCH64_TOOLCHAIN=GCC5`</br> - <br>`export UEFI_TOOLS_DIR=${BUILD_PATH}/uefi-tools`<br> - <br>`export EDK2_DIR=${BUILD_PATH}/edk2`</br> - <br>`EDK2_OUTPUT_DIR=${EDK2_DIR}/Build/HiKey/${BUILD_OPTION}_${AARCH64_TOOLCHAIN}`</br> - <br>`# Build fastboot for ARM Trust Firmware. It's used for recovery mode.`</br> - <br>`cd ${BUILD_PATH}/atf-fastboot`</br> - <br>`CROSS_COMPILE=aarch64-linux-gnu- make PLAT=hikey DEBUG=1`</br> - <br>`# Convert DEBUG/RELEASE to debug/release`</br> - <br>`FASTBOOT_BUILD_OPTION=$(echo ${BUILD_OPTION} | tr '[A-Z]' '[a-z]')`</br> - <br>`cd ${EDK2_DIR}`</br> - <br>`# Build UEFI & ARM Trust Firmware`</br> - <br>`${UEFI_TOOLS_DIR}/uefi-build.sh -b ${BUILD_OPTION} -a ../arm-trusted-firmware hikey`</br> - <br>`# Generate l-loader.bin`</br> - <br>`cd ${BUILD_PATH}/l-loader`</br> - <br>`ln -sf ${EDK2_OUTPUT_DIR}/FV/bl1.bin`</br> - <br>`ln -sf ${EDK2_OUTPUT_DIR}/FV/fip.bin`</br> - <br>`ln -sf ${BUILD_PATH}/atf-fastboot/build/hikey/${FASTBOOT_BUILD_OPTION}/bl1.bin fastboot.bin`</br> - <br>`python gen_loader.py -o l-loader.bin --img_bl1=bl1.bin --img_ns_bl1u=BL33_AP_UEFI.fd`</br> - <br>`arm-linux-gnueabihf-gcc -c -o start.o start.S`</br> - <br>`arm-linux-gnueabihf-ld -Bstatic -Tl-loader.lds -Ttext 0xf9800800 start.o -o loader`</br> - <br>`arm-linux-gnueabihf-objcopy -O binary loader temp`</br> - <br>`python gen_loader_hikey.py -o l-loader.bin --img_loader=temp --img_bl1=bl1.bin --img_ns_bl1u=fastboot.bin`</br> - - * Generate partition table for aosp. The eMMC capacity is either 4GB or 8GB. Just change "aosp-4g" to "linux-4g" for debian. - <br>`$PTABLE=aosp-4g SECTOR_SIZE=512 bash -x generate_ptable.sh`</br> - - -3. Setup Console ----------------- - - * Install ser2net. Use telnet as the console since UEFI fails to display Boot Manager GUI in minicom. __If you don't need Boot Manager GUI, just ignore this section.__ - <br>`$sudo apt-get install ser2net`</br> - - * Configure ser2net. - <br>`$sudo vi /etc/ser2net.conf`</br> - <br>Append one line for serial-over-USB in below.</br> - <br>_#ser2net.conf_</br> - <br>`2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner`</br> - - * Open the console. - <br>`$telnet localhost 2004`</br> - <br>And you could open the console remotely, too.</br> - - -4. Flush images in recovery mode ------------------------------ - - * Make sure Pin3-Pin4 on J15 are connected for recovery mode. Then power on HiKey. - - * Remove the modemmanager package. This package may cause the idt tool failure. - <br>`$sudo apt-get purge modemmanager`</br> - - * Run the command to download l-loader.bin into HiKey. - <br>`$sudo python hisi-idt.py -d /dev/ttyUSB1 --img1 l-loader.bin`</br> - - * Update images. All aosp or debian images could be fetched from [link](https://builds.96boards.org/). - <br>`$sudo fastboot flash ptable prm_ptable.img`</br> - <br>`$sudo fastboot flash fastboot fip.bin`</br> - <br>`$sudo fastboot flash boot boot.img`</br> - <br>`$sudo fastboot flash cache cache.img`</br> - <br>`$sudo fastboot flash system system.img`</br> - <br>`$sudo fastboot flash userdata userdata.img`</br> - - -5. Boot UEFI in normal mode ------------------------------ - - * Make sure Pin3-Pin4 on J15 are open for normal boot mode. Then power on HiKey. - - * Reference [link](https://github.com/96boards-hikey/tools-images-hikey960/blob/master/build-from-source/README-ATF-UEFI-build-from-source.md) |