diff options
Diffstat (limited to 'docs/auth-framework.rst')
| -rw-r--r-- | docs/auth-framework.rst | 937 |
1 files changed, 937 insertions, 0 deletions
diff --git a/docs/auth-framework.rst b/docs/auth-framework.rst new file mode 100644 index 00000000..765d9f89 --- /dev/null +++ b/docs/auth-framework.rst @@ -0,0 +1,937 @@ +Abstracting a Chain of Trust +============================ + + +.. section-numbering:: + :suffix: . + +.. contents:: + +The aim of this document is to describe the authentication framework implemented +in the Trusted Firmware. This framework fulfills the following requirements: + +#. It should be possible for a platform port to specify the Chain of Trust in + terms of certificate hierarchy and the mechanisms used to verify a + particular image/certificate. + +#. The framework should distinguish between: + + - The mechanism used to encode and transport information, e.g. DER encoded + X.509v3 certificates to ferry Subject Public Keys, hashes and non-volatile + counters. + + - The mechanism used to verify the transported information i.e. the + cryptographic libraries. + +The framework has been designed following a modular approach illustrated in the +next diagram: + +:: + + +---------------+---------------+------------+ + | Trusted | Trusted | Trusted | + | Firmware | Firmware | Firmware | + | Generic | IO Framework | Platform | + | Code i.e. | (IO) | Port | + | BL1/BL2 (GEN) | | (PP) | + +---------------+---------------+------------+ + ^ ^ ^ + | | | + v v v + +-----------+ +-----------+ +-----------+ + | | | | | Image | + | Crypto | | Auth | | Parser | + | Module |<->| Module |<->| Module | + | (CM) | | (AM) | | (IPM) | + | | | | | | + +-----------+ +-----------+ +-----------+ + ^ ^ + | | + v v + +----------------+ +-----------------+ + | Cryptographic | | Image Parser | + | Libraries (CL) | | Libraries (IPL) | + +----------------+ +-----------------+ + | | + | | + | | + v v + +-----------------+ + | Misc. Libs e.g. | + | ASN.1 decoder | + | | + +-----------------+ + + DIAGRAM 1. + +This document describes the inner details of the authentication framework and +the abstraction mechanisms available to specify a Chain of Trust. + +Framework design +---------------- + +This section describes some aspects of the framework design and the rationale +behind them. These aspects are key to verify a Chain of Trust. + +Chain of Trust +~~~~~~~~~~~~~~ + +A CoT is basically a sequence of authentication images which usually starts with +a root of trust and culminates in a single data image. The following diagram +illustrates how this maps to a CoT for the BL31 image described in the +TBBR-Client specification. + +:: + + +------------------+ +-------------------+ + | ROTPK/ROTPK Hash |------>| Trusted Key | + +------------------+ | Certificate | + | (Auth Image) | + /+-------------------+ + / | + / | + / | + / | + L v + +------------------+ +-------------------+ + | Trusted World |------>| BL31 Key | + | Public Key | | Certificate | + +------------------+ | (Auth Image) | + +-------------------+ + / | + / | + / | + / | + / v + +------------------+ L +-------------------+ + | BL31 Content |------>| BL31 Content | + | Certificate PK | | Certificate | + +------------------+ | (Auth Image) | + +-------------------+ + / | + / | + / | + / | + / v + +------------------+ L +-------------------+ + | BL31 Hash |------>| BL31 Image | + | | | (Data Image) | + +------------------+ | | + +-------------------+ + + DIAGRAM 2. + +The root of trust is usually a public key (ROTPK) that has been burnt in the +platform and cannot be modified. + +Image types +~~~~~~~~~~~ + +Images in a CoT are categorised as authentication and data images. An +authentication image contains information to authenticate a data image or +another authentication image. A data image is usually a boot loader binary, but +it could be any other data that requires authentication. + +Component responsibilities +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +For every image in a Chain of Trust, the following high level operations are +performed to verify it: + +#. Allocate memory for the image either statically or at runtime. + +#. Identify the image and load it in the allocated memory. + +#. Check the integrity of the image as per its type. + +#. Authenticate the image as per the cryptographic algorithms used. + +#. If the image is an authentication image, extract the information that will + be used to authenticate the next image in the CoT. + +In Diagram 1, each component is responsible for one or more of these operations. +The responsibilities are briefly described below. + +TF Generic code and IO framework (GEN/IO) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +These components are responsible for initiating the authentication process for a +particular image in BL1 or BL2. For each BL image that requires authentication, +the Generic code asks recursively the Authentication module what is the parent +image until either an authenticated image or the ROT is reached. Then the +Generic code calls the IO framewotk to load the image and calls the +Authentication module to authenticate it, following the CoT from ROT to Image. + +TF Platform Port (PP) +^^^^^^^^^^^^^^^^^^^^^ + +The platform is responsible for: + +#. Specifying the CoT for each image that needs to be authenticated. Details of + how a CoT can be specified by the platform are explained later. The platform + also specifies the authentication methods and the parsing method used for + each image. + +#. Statically allocating memory for each parameter in each image which is + used for verifying the CoT, e.g. memory for public keys, hashes etc. + +#. Providing the ROTPK or a hash of it. + +#. Providing additional information to the IPM to enable it to identify and + extract authentication parameters contained in an image, e.g. if the + parameters are stored as X509v3 extensions, the corresponding OID must be + provided. + +#. Fulfill any other memory requirements of the IPM and the CM (not currently + described in this document). + +#. Export functions to verify an image which uses an authentication method that + cannot be interpreted by the CM, e.g. if an image has to be verified using a + NV counter, then the value of the counter to compare with can only be + provided by the platform. + +#. Export a custom IPM if a proprietary image format is being used (described + later). + +Authentication Module (AM) +^^^^^^^^^^^^^^^^^^^^^^^^^^ + +It is responsible for: + +#. Providing the necessary abstraction mechanisms to describe a CoT. Amongst + other things, the authentication and image parsing methods must be specified + by the PP in the CoT. + +#. Verifying the CoT passed by GEN by utilising functionality exported by the + PP, IPM and CM. + +#. Tracking which images have been verified. In case an image is a part of + multiple CoTs then it should be verified only once e.g. the Trusted World + Key Certificate in the TBBR-Client spec. contains information to verify + SCP\_BL2, BL31, BL32 each of which have a separate CoT. (This + responsibility has not been described in this document but should be + trivial to implement). + +#. Reusing memory meant for a data image to verify authentication images e.g. + in the CoT described in Diagram 2, each certificate can be loaded and + verified in the memory reserved by the platform for the BL31 image. By the + time BL31 (the data image) is loaded, all information to authenticate it + will have been extracted from the parent image i.e. BL31 content + certificate. It is assumed that the size of an authentication image will + never exceed the size of a data image. It should be possible to verify this + at build time using asserts. + +Cryptographic Module (CM) +^^^^^^^^^^^^^^^^^^^^^^^^^ + +The CM is responsible for providing an API to: + +#. Verify a digital signature. +#. Verify a hash. + +The CM does not include any cryptography related code, but it relies on an +external library to perform the cryptographic operations. A Crypto-Library (CL) +linking the CM and the external library must be implemented. The following +functions must be provided by the CL: + +.. code:: c + + void (*init)(void); + int (*verify_signature)(void *data_ptr, unsigned int data_len, + void *sig_ptr, unsigned int sig_len, + void *sig_alg, unsigned int sig_alg_len, + void *pk_ptr, unsigned int pk_len); + int (*verify_hash)(void *data_ptr, unsigned int data_len, + void *digest_info_ptr, unsigned int digest_info_len); + +These functions are registered in the CM using the macro: + +.. code:: c + + REGISTER_CRYPTO_LIB(_name, _init, _verify_signature, _verify_hash); + +``_name`` must be a string containing the name of the CL. This name is used for +debugging purposes. + +Image Parser Module (IPM) +^^^^^^^^^^^^^^^^^^^^^^^^^ + +The IPM is responsible for: + +#. Checking the integrity of each image loaded by the IO framework. +#. Extracting parameters used for authenticating an image based upon a + description provided by the platform in the CoT descriptor. + +Images may have different formats (for example, authentication images could be +x509v3 certificates, signed ELF files or any other platform specific format). +The IPM allows to register an Image Parser Library (IPL) for every image format +used in the CoT. This library must implement the specific methods to parse the +image. The IPM obtains the image format from the CoT and calls the right IPL to +check the image integrity and extract the authentication parameters. + +See Section "Describing the image parsing methods" for more details about the +mechanism the IPM provides to define and register IPLs. + +Authentication methods +~~~~~~~~~~~~~~~~~~~~~~ + +The AM supports the following authentication methods: + +#. Hash +#. Digital signature + +The platform may specify these methods in the CoT in case it decides to define +a custom CoT instead of reusing a predefined one. + +If a data image uses multiple methods, then all the methods must be a part of +the same CoT. The number and type of parameters are method specific. These +parameters should be obtained from the parent image using the IPM. + +#. Hash + + Parameters: + + #. A pointer to data to hash + #. Length of the data + #. A pointer to the hash + #. Length of the hash + + The hash will be represented by the DER encoding of the following ASN.1 + type: + + :: + + DigestInfo ::= SEQUENCE { + digestAlgorithm DigestAlgorithmIdentifier, + digest Digest + } + + This ASN.1 structure makes it possible to remove any assumption about the + type of hash algorithm used as this information accompanies the hash. This + should allow the Cryptography Library (CL) to support multiple hash + algorithm implementations. + +#. Digital Signature + + Parameters: + + #. A pointer to data to sign + #. Length of the data + #. Public Key Algorithm + #. Public Key value + #. Digital Signature Algorithm + #. Digital Signature value + + The Public Key parameters will be represented by the DER encoding of the + following ASN.1 type: + + :: + + SubjectPublicKeyInfo ::= SEQUENCE { + algorithm AlgorithmIdentifier{PUBLIC-KEY,{PublicKeyAlgorithms}}, + subjectPublicKey BIT STRING } + + The Digital Signature Algorithm will be represented by the DER encoding of + the following ASN.1 types. + + :: + + AlgorithmIdentifier {ALGORITHM:IOSet } ::= SEQUENCE { + algorithm ALGORITHM.&id({IOSet}), + parameters ALGORITHM.&Type({IOSet}{@algorithm}) OPTIONAL + } + + The digital signature will be represented by: + + :: + + signature ::= BIT STRING + +The authentication framework will use the image descriptor to extract all the +information related to authentication. + +Specifying a Chain of Trust +--------------------------- + +A CoT can be described as a set of image descriptors linked together in a +particular order. The order dictates the sequence in which they must be +verified. Each image has a set of properties which allow the AM to verify it. +These properties are described below. + +The PP is responsible for defining a single or multiple CoTs for a data image. +Unless otherwise specified, the data structures described in the following +sections are populated by the PP statically. + +Describing the image parsing methods +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The parsing method refers to the format of a particular image. For example, an +authentication image that represents a certificate could be in the X.509v3 +format. A data image that represents a boot loader stage could be in raw binary +or ELF format. The IPM supports three parsing methods. An image has to use one +of the three methods described below. An IPL is responsible for interpreting a +single parsing method. There has to be one IPL for every method used by the +platform. + +#. Raw format: This format is effectively a nop as an image using this method + is treated as being in raw binary format e.g. boot loader images used by ARM + TF. This method should only be used by data images. + +#. X509V3 method: This method uses industry standards like X.509 to represent + PKI certificates (authentication images). It is expected that open source + libraries will be available which can be used to parse an image represented + by this method. Such libraries can be used to write the corresponding IPL + e.g. the X.509 parsing library code in mbed TLS. + +#. Platform defined method: This method caters for platform specific + proprietary standards to represent authentication or data images. For + example, The signature of a data image could be appended to the data image + raw binary. A header could be prepended to the combined blob to specify the + extents of each component. The platform will have to implement the + corresponding IPL to interpret such a format. + +The following enum can be used to define these three methods. + +.. code:: c + + typedef enum img_type_enum { + IMG_RAW, /* Binary image */ + IMG_PLAT, /* Platform specific format */ + IMG_CERT, /* X509v3 certificate */ + IMG_MAX_TYPES, + } img_type_t; + +An IPL must provide functions with the following prototypes: + +.. code:: c + + void init(void); + int check_integrity(void *img, unsigned int img_len); + int get_auth_param(const auth_param_type_desc_t *type_desc, + void *img, unsigned int img_len, + void **param, unsigned int *param_len); + +An IPL for each type must be registered using the following macro: + +:: + + REGISTER_IMG_PARSER_LIB(_type, _name, _init, _check_int, _get_param) + +- ``_type``: one of the types described above. +- ``_name``: a string containing the IPL name for debugging purposes. +- ``_init``: initialization function pointer. +- ``_check_int``: check image integrity function pointer. +- ``_get_param``: extract authentication parameter funcion pointer. + +The ``init()`` function will be used to initialize the IPL. + +The ``check_integrity()`` function is passed a pointer to the memory where the +image has been loaded by the IO framework and the image length. It should ensure +that the image is in the format corresponding to the parsing method and has not +been tampered with. For example, RFC-2459 describes a validation sequence for an +X.509 certificate. + +The ``get_auth_param()`` function is passed a parameter descriptor containing +information about the parameter (``type_desc`` and ``cookie``) to identify and +extract the data corresponding to that parameter from an image. This data will +be used to verify either the current or the next image in the CoT sequence. + +Each image in the CoT will specify the parsing method it uses. This information +will be used by the IPM to find the right parser descriptor for the image. + +Describing the authentication method(s) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +As part of the CoT, each image has to specify one or more authentication methods +which will be used to verify it. As described in the Section "Authentication +methods", there are three methods supported by the AM. + +.. code:: c + + typedef enum { + AUTH_METHOD_NONE, + AUTH_METHOD_HASH, + AUTH_METHOD_SIG, + AUTH_METHOD_NUM + } auth_method_type_t; + +The AM defines the type of each parameter used by an authentication method. It +uses this information to: + +#. Specify to the ``get_auth_param()`` function exported by the IPM, which + parameter should be extracted from an image. + +#. Correctly marshall the parameters while calling the verification function + exported by the CM and PP. + +#. Extract authentication parameters from a parent image in order to verify a + child image e.g. to verify the certificate image, the public key has to be + obtained from the parent image. + +.. code:: c + + typedef enum { + AUTH_PARAM_NONE, + AUTH_PARAM_RAW_DATA, /* Raw image data */ + AUTH_PARAM_SIG, /* The image signature */ + AUTH_PARAM_SIG_ALG, /* The image signature algorithm */ + AUTH_PARAM_HASH, /* A hash (including the algorithm) */ + AUTH_PARAM_PUB_KEY, /* A public key */ + } auth_param_type_t; + +The AM defines the following structure to identify an authentication parameter +required to verify an image. + +.. code:: c + + typedef struct auth_param_type_desc_s { + auth_param_type_t type; + void *cookie; + } auth_param_type_desc_t; + +``cookie`` is used by the platform to specify additional information to the IPM +which enables it to uniquely identify the parameter that should be extracted +from an image. For example, the hash of a BL3x image in its corresponding +content certificate is stored in an X509v3 custom extension field. An extension +field can only be identified using an OID. In this case, the ``cookie`` could +contain the pointer to the OID defined by the platform for the hash extension +field while the ``type`` field could be set to ``AUTH_PARAM_HASH``. A value of 0 for +the ``cookie`` field means that it is not used. + +For each method, the AM defines a structure with the parameters required to +verify the image. + +.. code:: c + + /* + * Parameters for authentication by hash matching + */ + typedef struct auth_method_param_hash_s { + auth_param_type_desc_t *data; /* Data to hash */ + auth_param_type_desc_t *hash; /* Hash to match with */ + } auth_method_param_hash_t; + + /* + * Parameters for authentication by signature + */ + typedef struct auth_method_param_sig_s { + auth_param_type_desc_t *pk; /* Public key */ + auth_param_type_desc_t *sig; /* Signature to check */ + auth_param_type_desc_t *alg; /* Signature algorithm */ + auth_param_type_desc_t *tbs; /* Data signed */ + } auth_method_param_sig_t; + +The AM defines the following structure to describe an authentication method for +verifying an image + +.. code:: c + + /* + * Authentication method descriptor + */ + typedef struct auth_method_desc_s { + auth_method_type_t type; + union { + auth_method_param_hash_t hash; + auth_method_param_sig_t sig; + } param; + } auth_method_desc_t; + +Using the method type specified in the ``type`` field, the AM finds out what field +needs to access within the ``param`` union. + +Storing Authentication parameters +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A parameter described by ``auth_param_type_desc_t`` to verify an image could be +obtained from either the image itself or its parent image. The memory allocated +for loading the parent image will be reused for loading the child image. Hence +parameters which are obtained from the parent for verifying a child image need +to have memory allocated for them separately where they can be stored. This +memory must be statically allocated by the platform port. + +The AM defines the following structure to store the data corresponding to an +authentication parameter. + +.. code:: c + + typedef struct auth_param_data_desc_s { + void *auth_param_ptr; + unsigned int auth_param_len; + } auth_param_data_desc_t; + +The ``auth_param_ptr`` field is initialized by the platform. The ``auth_param_len`` +field is used to specify the length of the data in the memory. + +For parameters that can be obtained from the child image itself, the IPM is +responsible for populating the ``auth_param_ptr`` and ``auth_param_len`` fields +while executing the ``img_get_auth_param()`` function. + +The AM defines the following structure to enable an image to describe the +parameters that should be extracted from it and used to verify the next image +(child) in a CoT. + +.. code:: c + + typedef struct auth_param_desc_s { + auth_param_type_desc_t type_desc; + auth_param_data_desc_t data; + } auth_param_desc_t; + +Describing an image in a CoT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +An image in a CoT is a consolidation of the following aspects of a CoT described +above. + +#. A unique identifier specified by the platform which allows the IO framework + to locate the image in a FIP and load it in the memory reserved for the data + image in the CoT. + +#. A parsing method which is used by the AM to find the appropriate IPM. + +#. Authentication methods and their parameters as described in the previous + section. These are used to verify the current image. + +#. Parameters which are used to verify the next image in the current CoT. These + parameters are specified only by authentication images and can be extracted + from the current image once it has been verified. + +The following data structure describes an image in a CoT. + +.. code:: c + + typedef struct auth_img_desc_s { + unsigned int img_id; + const struct auth_img_desc_s *parent; + img_type_t img_type; + auth_method_desc_t img_auth_methods[AUTH_METHOD_NUM]; + auth_param_desc_t authenticated_data[COT_MAX_VERIFIED_PARAMS]; + } auth_img_desc_t; + +A CoT is defined as an array of ``auth_image_desc_t`` structures linked together +by the ``parent`` field. Those nodes with no parent must be authenticated using +the ROTPK stored in the platform. + +Implementation example +---------------------- + +This section is a detailed guide explaining a trusted boot implementation using +the authentication framework. This example corresponds to the Applicative +Functional Mode (AFM) as specified in the TBBR-Client document. It is +recommended to read this guide along with the source code. + +The TBBR CoT +~~~~~~~~~~~~ + +The CoT can be found in ``drivers/auth/tbbr/tbbr_cot.c``. This CoT consists of an +array of image descriptors and it is registered in the framework using the macro +``REGISTER_COT(cot_desc)``, where 'cot\_desc' must be the name of the array +(passing a pointer or any other type of indirection will cause the registration +process to fail). + +The number of images participating in the boot process depends on the CoT. There +is, however, a minimum set of images that are mandatory in the Trusted Firmware +and thus all CoTs must present: + +- ``BL2`` +- ``SCP_BL2`` (platform specific) +- ``BL31`` +- ``BL32`` (optional) +- ``BL33`` + +The TBBR specifies the additional certificates that must accompany these images +for a proper authentication. Details about the TBBR CoT may be found in the +`Trusted Board Boot`_ document. + +Following the `Platform Porting Guide`_, a platform must provide unique +identifiers for all the images and certificates that will be loaded during the +boot process. If a platform is using the TBBR as a reference for trusted boot, +these identifiers can be obtained from ``include/common/tbbr/tbbr_img_def.h``. +ARM platforms include this file in ``include/plat/arm/common/arm_def.h``. Other +platforms may also include this file or provide their own identifiers. + +**Important**: the authentication module uses these identifiers to index the +CoT array, so the descriptors location in the array must match the identifiers. + +Each image descriptor must specify: + +- ``img_id``: the corresponding image unique identifier defined by the platform. +- ``img_type``: the image parser module uses the image type to call the proper + parsing library to check the image integrity and extract the required + authentication parameters. Three types of images are currently supported: + + - ``IMG_RAW``: image is a raw binary. No parsing functions are available, + other than reading the whole image. + - ``IMG_PLAT``: image format is platform specific. The platform may use this + type for custom images not directly supported by the authentication + framework. + - ``IMG_CERT``: image is an x509v3 certificate. + +- ``parent``: pointer to the parent image descriptor. The parent will contain + the information required to authenticate the current image. If the parent + is NULL, the authentication parameters will be obtained from the platform + (i.e. the BL2 and Trusted Key certificates are signed with the ROT private + key, whose public part is stored in the platform). +- ``img_auth_methods``: this array defines the authentication methods that must + be checked to consider an image authenticated. Each method consists of a + type and a list of parameter descriptors. A parameter descriptor consists of + a type and a cookie which will point to specific information required to + extract that parameter from the image (i.e. if the parameter is stored in an + x509v3 extension, the cookie will point to the extension OID). Depending on + the method type, a different number of parameters must be specified. + Supported methods are: + + - ``AUTH_METHOD_HASH``: the hash of the image must match the hash extracted + from the parent image. The following parameter descriptors must be + specified: + + - ``data``: data to be hashed (obtained from current image) + - ``hash``: reference hash (obtained from parent image) + + - ``AUTH_METHOD_SIG``: the image (usually a certificate) must be signed with + the private key whose public part is extracted from the parent image (or + the platform if the parent is NULL). The following parameter descriptors + must be specified: + + - ``pk``: the public key (obtained from parent image) + - ``sig``: the digital signature (obtained from current image) + - ``alg``: the signature algorithm used (obtained from current image) + - ``data``: the data to be signed (obtained from current image) + +- ``authenticated_data``: this array indicates what authentication parameters + must be extracted from an image once it has been authenticated. Each + parameter consists of a parameter descriptor and the buffer address/size + to store the parameter. The CoT is responsible for allocating the required + memory to store the parameters. + +In the ``tbbr_cot.c`` file, a set of buffers are allocated to store the parameters +extracted from the certificates. In the case of the TBBR CoT, these parameters +are hashes and public keys. In DER format, an RSA-2048 public key requires 294 +bytes, and a hash requires 51 bytes. Depending on the CoT and the authentication +process, some of the buffers may be reused at different stages during the boot. + +Next in that file, the parameter descriptors are defined. These descriptors will +be used to extract the parameter data from the corresponding image. + +Example: the BL31 Chain of Trust +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Four image descriptors form the BL31 Chain of Trust: + +.. code:: asm + + [TRUSTED_KEY_CERT_ID] = { + .img_id = TRUSTED_KEY_CERT_ID, + .img_type = IMG_CERT, + .parent = NULL, + .img_auth_methods = { + [0] = { + .type = AUTH_METHOD_SIG, + .param.sig = { + .pk = &subject_pk, + .sig = &sig, + .alg = &sig_alg, + .data = &raw_data, + } + } + }, + .authenticated_data = { + [0] = { + .type_desc = &trusted_world_pk, + .data = { + .ptr = (void *)trusted_world_pk_buf, + .len = (unsigned int)PK_DER_LEN + } + }, + [1] = { + .type_desc = &non_trusted_world_pk, + .data = { + .ptr = (void *)non_trusted_world_pk_buf, + .len = (unsigned int)PK_DER_LEN + } + } + } + }, + [SOC_FW_KEY_CERT_ID] = { + .img_id = SOC_FW_KEY_CERT_ID, + .img_type = IMG_CERT, + .parent = &cot_desc[TRUSTED_KEY_CERT_ID], + .img_auth_methods = { + [0] = { + .type = AUTH_METHOD_SIG, + .param.sig = { + .pk = &trusted_world_pk, + .sig = &sig, + .alg = &sig_alg, + .data = &raw_data, + } + } + }, + .authenticated_data = { + [0] = { + .type_desc = &soc_fw_content_pk, + .data = { + .ptr = (void *)content_pk_buf, + .len = (unsigned int)PK_DER_LEN + } + } + } + }, + [SOC_FW_CONTENT_CERT_ID] = { + .img_id = SOC_FW_CONTENT_CERT_ID, + .img_type = IMG_CERT, + .parent = &cot_desc[SOC_FW_KEY_CERT_ID], + .img_auth_methods = { + [0] = { + .type = AUTH_METHOD_SIG, + .param.sig = { + .pk = &soc_fw_content_pk, + .sig = &sig, + .alg = &sig_alg, + .data = &raw_data, + } + } + }, + .authenticated_data = { + [0] = { + .type_desc = &soc_fw_hash, + .data = { + .ptr = (void *)soc_fw_hash_buf, + .len = (unsigned int)HASH_DER_LEN + } + } + } + }, + [BL31_IMAGE_ID] = { + .img_id = BL31_IMAGE_ID, + .img_type = IMG_RAW, + .parent = &cot_desc[SOC_FW_CONTENT_CERT_ID], + .img_auth_methods = { + [0] = { + .type = AUTH_METHOD_HASH, + .param.hash = { + .data = &raw_data, + .hash = &soc_fw_hash, + } + } + } + } + +The **Trusted Key certificate** is signed with the ROT private key and contains +the Trusted World public key and the Non-Trusted World public key as x509v3 +extensions. This must be specified in the image descriptor using the +``img_auth_methods`` and ``authenticated_data`` arrays, respectively. + +The Trusted Key certificate is authenticated by checking its digital signature +using the ROTPK. Four parameters are required to check a signature: the public +key, the algorithm, the signature and the data that has been signed. Therefore, +four parameter descriptors must be specified with the authentication method: + +- ``subject_pk``: parameter descriptor of type ``AUTH_PARAM_PUB_KEY``. This type + is used to extract a public key from the parent image. If the cookie is an + OID, the key is extracted from the corresponding x509v3 extension. If the + cookie is NULL, the subject public key is retrieved. In this case, because + the parent image is NULL, the public key is obtained from the platform + (this key will be the ROTPK). +- ``sig``: parameter descriptor of type ``AUTH_PARAM_SIG``. It is used to extract + the signature from the certificate. +- ``sig_alg``: parameter descriptor of type ``AUTH_PARAM_SIG``. It is used to + extract the signature algorithm from the certificate. +- ``raw_data``: parameter descriptor of type ``AUTH_PARAM_RAW_DATA``. It is used + to extract the data to be signed from the certificate. + +Once the signature has been checked and the certificate authenticated, the +Trusted World public key needs to be extracted from the certificate. A new entry +is created in the ``authenticated_data`` array for that purpose. In that entry, +the corresponding parameter descriptor must be specified along with the buffer +address to store the parameter value. In this case, the ``tz_world_pk`` descriptor +is used to extract the public key from an x509v3 extension with OID +``TRUSTED_WORLD_PK_OID``. The BL31 key certificate will use this descriptor as +parameter in the signature authentication method. The key is stored in the +``plat_tz_world_pk_buf`` buffer. + +The **BL31 Key certificate** is authenticated by checking its digital signature +using the Trusted World public key obtained previously from the Trusted Key +certificate. In the image descriptor, we specify a single authentication method +by signature whose public key is the ``tz_world_pk``. Once this certificate has +been authenticated, we have to extract the BL31 public key, stored in the +extension specified by ``bl31_content_pk``. This key will be copied to the +``plat_content_pk`` buffer. + +The **BL31 certificate** is authenticated by checking its digital signature +using the BL31 public key obtained previously from the BL31 Key certificate. +We specify the authentication method using ``bl31_content_pk`` as public key. +After authentication, we need to extract the BL31 hash, stored in the extension +specified by ``bl31_hash``. This hash will be copied to the ``plat_bl31_hash_buf`` +buffer. + +The **BL31 image** is authenticated by calculating its hash and matching it +with the hash obtained from the BL31 certificate. The image descriptor contains +a single authentication method by hash. The parameters to the hash method are +the reference hash, ``bl31_hash``, and the data to be hashed. In this case, it is +the whole image, so we specify ``raw_data``. + +The image parser library +~~~~~~~~~~~~~~~~~~~~~~~~ + +The image parser module relies on libraries to check the image integrity and +extract the authentication parameters. The number and type of parser libraries +depend on the images used in the CoT. Raw images do not need a library, so +only an x509v3 library is required for the TBBR CoT. + +ARM platforms will use an x509v3 library based on mbed TLS. This library may be +found in ``drivers/auth/mbedtls/mbedtls_x509_parser.c``. It exports three +functions: + +.. code:: c + + void init(void); + int check_integrity(void *img, unsigned int img_len); + int get_auth_param(const auth_param_type_desc_t *type_desc, + void *img, unsigned int img_len, + void **param, unsigned int *param_len); + +The library is registered in the framework using the macro +``REGISTER_IMG_PARSER_LIB()``. Each time the image parser module needs to access +an image of type ``IMG_CERT``, it will call the corresponding function exported +in this file. + +The build system must be updated to include the corresponding library and +mbed TLS sources. ARM platforms use the ``arm_common.mk`` file to pull the +sources. + +The cryptographic library +~~~~~~~~~~~~~~~~~~~~~~~~~ + +The cryptographic module relies on a library to perform the required operations, +i.e. verify a hash or a digital signature. ARM platforms will use a library +based on mbed TLS, which can be found in +``drivers/auth/mbedtls/mbedtls_crypto.c``. This library is registered in the +authentication framework using the macro ``REGISTER_CRYPTO_LIB()`` and exports +three functions: + +.. code:: c + + void init(void); + int verify_signature(void *data_ptr, unsigned int data_len, + void *sig_ptr, unsigned int sig_len, + void *sig_alg, unsigned int sig_alg_len, + void *pk_ptr, unsigned int pk_len); + int verify_hash(void *data_ptr, unsigned int data_len, + void *digest_info_ptr, unsigned int digest_info_len); + +The key algorithm (rsa, ecdsa) must be specified in the build system using the +``TF_MBEDTLS_KEY_ALG`` variable, so the Makefile can include the corresponding +sources in the build. + +Note: If code size is a concern, the build option ``MBEDTLS_SHA256_SMALLER`` can +be defined in the platform Makefile. It will make mbed TLS use an implementation +of SHA-256 with smaller memory footprint (~1.5 KB less) but slower (~30%). + +-------------- + +*Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.* + +.. _Trusted Board Boot: ./trusted-board-boot.rst +.. _Platform Porting Guide: ./porting-guide.rst |