rockchip: rk3399: Don't wait for vblank in M0 for ddrfreq

This removes waiting for vblank on the M0 during ddrfreq transitions.
That will now be done in the kernel to allow scheduling to be done on
the CPU core that changes the ddr frequency. Waiting for vblank in
the M0 would have the CPU core that waits on the M0 spin looping for
up to 16ms (1 frame for the display).

Signed-off-by: Derek Basehore <dbasehore@chromium.org>

1 files changed, 0 insertions, 110 deletions

diff --git a/plat/rockchip/rk3399/drivers/m0/src/dram.c b/plat/rockchip/rk3399/drivers/m0/src/dram.c
index 6a22e9b3..26975628 100644
--- a/plat/rockchip/rk3399/drivers/m0/src/dram.c
+++ b/plat/rockchip/rk3399/drivers/m0/src/dram.c
@@ -45,8 +45,6 @@
 #define IDLE_MSCH1		(1 << 19)
 #define IDLE_MSCH0		(1 << 18)
 
-#define PD_VOP_PWR_STAT		(1 << 20)
-
 /* CRU */
 #define CRU_DPLL_CON0		0x40
 #define CRU_DPLL_CON1		0x44
@@ -60,20 +58,6 @@
 #define CRU_CLKGATE10_CON	0x328
 #define CRU_CLKGATE28_CON	0x370
 
-/* CRU_CLKGATE10_CON */
-#define ACLK_VOP0_PRE_SRC_EN	(1 << 8)
-#define HCLK_VOP0_PRE_EN	(1 << 9)
-#define ACLK_VOP1_PRE_SRC_EN	(1 << 10)
-#define HCLK_VOP1_PRE_EN	(1 << 11)
-#define DCLK_VOP0_SRC_EN	(1 << 12)
-#define DCLK_VOP1_SRC_EN	(1 << 13)
-
-/* CRU_CLKGATE28_CON */
-#define HCLK_VOP0_EN		(1 << 2)
-#define ACLK_VOP0_EN		(1 << 3)
-#define HCLK_VOP1_EN		(1 << 6)
-#define ACLK_VOP1_EN		(1 << 7)
-
 /* CRU_PLL_CON3 */
 #define PLL_SLOW_MODE		0
 #define PLL_NORMAL_MODE		1
@@ -83,30 +67,6 @@
 /* PMU CRU */
 #define PMU_CRU_GATEDIS_CON0	0x130
 
-/* VOP */
-#define VOP_SYS_CTRL		0x8
-#define VOP_SYS_CTRL1		0xc
-#define VOP_WIN0_CTRL0		0x30
-#define	VOP_INTR_CLEAR0		0x284
-#define VOP_INTR_RAW_STATUS0	0x28c
-
-/* VOP_SYS_CTRL */
-#define VOP_DMA_STOP_EN		(1 << 21)
-#define VOP_STANDBY_EN		(1 << 22)
-
-/* VOP_WIN0_CTRL0 */
-#define WB_ENABLE		(1 << 0)
-
-/* VOP_INTR_CLEAR0 */
-#define	INT_CLR_DMA_FINISH	(1 << 15)
-#define INT_CLR_LINE_FLAG1	(1 << 4)
-#define INT_CLR_LINE_FLAG0	(1 << 3)
-
-/* VOP_INTR_RAW_STATUS0 */
-#define	INT_RAW_STATUS_DMA_FINISH	(1 << 15)
-#define INT_RAW_STATUS_LINE_FLAG1	(1 << 4)
-#define INT_RAW_STATUS_LINE_FLAG0	(1 << 3)
-
 /* CIC */
 #define CIC_CTRL0		0
 #define CIC_CTRL1		0x4
@@ -114,74 +74,6 @@
 
 uint32_t gatedis_con0;
 
-static inline int check_dma_status(uint32_t vop_addr, uint32_t *clr_dma_flag)
-{
-	if (*clr_dma_flag) {
-		mmio_write_32(vop_addr + VOP_INTR_CLEAR0, 0x80008000);
-		*clr_dma_flag = 0;
-	}
-
-	if ((mmio_read_32(vop_addr + VOP_SYS_CTRL) &
-	     (VOP_STANDBY_EN | VOP_DMA_STOP_EN)) ||
-	    !(mmio_read_32(vop_addr + VOP_WIN0_CTRL0) & WB_ENABLE) ||
-	    (mmio_read_32(vop_addr + VOP_INTR_RAW_STATUS0) &
-	    INT_RAW_STATUS_DMA_FINISH))
-		return 1;
-
-	return 0;
-}
-
-static int wait_vop_dma_finish(void)
-{
-	uint32_t clr_dma_flag = 1;
-	uint32_t ret = 0;
-
-	stopwatch_init_usecs_expire(60000);
-	while (((mmio_read_32(PMU_BASE + PMU_PWRDN_ST) &
-		PD_VOP_PWR_STAT) == 0)) {
-		/*
-		 * VOPL case:
-		 * CRU_CLKGATE10_CON(bit10): ACLK_VOP1_PRE_SRC_EN
-		 * CRU_CLKGATE10_CON(bit11): HCLK_VOP1_PRE_EN
-		 * CRU_CLKGATE10_CON(bit13): DCLK_VOP1_SRC_EN
-		 * CRU_CLKGATE28_CON(bit7): ACLK_VOP1_EN
-		 * CRU_CLKGATE28_CON(bit6): HCLK_VOP1_EN
-		 *
-		 * VOPB case:
-		 * CRU_CLKGATE10_CON(bit8): ACLK_VOP0_PRE_SRC_EN
-		 * CRU_CLKGATE10_CON(bit9): HCLK_VOP0_PRE_EN
-		 * CRU_CLKGATE10_CON(bit12): DCLK_VOP0_SRC_EN
-		 * CRU_CLKGATE28_CON(bit3): ACLK_VOP0_EN
-		 * CRU_CLKGATE28_CON(bit2): HCLK_VOP0_EN
-		 */
-		if (((mmio_read_32(CRU_BASE_ADDR + CRU_CLKGATE10_CON) &
-		      0x2c00) == 0) &&
-		    ((mmio_read_32(CRU_BASE_ADDR + CRU_CLKGATE28_CON) &
-		      0xc0) == 0)) {
-			if (check_dma_status(VOP_LITE_BASE_ADDR, &clr_dma_flag))
-				return;
-		} else if (((mmio_read_32(CRU_BASE_ADDR + CRU_CLKGATE10_CON) &
-			     0x1300) == 0) &&
-			   ((mmio_read_32(CRU_BASE_ADDR + CRU_CLKGATE28_CON) &
-			     0x0c) == 0)) {
-			if (check_dma_status(VOP_BIG_BASE_ADDR, &clr_dma_flag))
-				return;
-		} else {
-			/* No VOPs are enabled, so don't wait. */
-			return;
-		}
-
-		if (stopwatch_expired()) {
-			ret = 1;
-			goto out;
-		}
-	}
-
-out:
-	stopwatch_reset();
-	return ret;
-}
-
 static void idle_port(void)
 {
 	gatedis_con0 = mmio_read_32(PMU_CRU_BASE_ADDR + PMU_CRU_GATEDIS_CON0);
@@ -224,8 +116,6 @@ static void ddr_set_pll(void)
 
 void handle_dram(void)
 {
-	wait_vop_dma_finish();
-
 	idle_port();
 
 	mmio_write_32(CIC_BASE_ADDR + CIC_CTRL0,