diff options
author | Konstantin Porotchkin <kostap@marvell.com> | 2018-10-21 16:48:33 +0300 |
---|---|---|
committer | Konstantin Porotchkin <kostap@marvell.com> | 2018-12-04 14:09:44 +0200 |
commit | 5a9f00f707e9a560ed598dece9711a8640c8e55f (patch) | |
tree | a4fb1ce0a790e80dbbe0be531019e7fb70814d45 /plat/marvell | |
parent | d03f7a312274e9e61f42943be17d65d5385e2db6 (diff) |
plat/marvell: comphy: Add support for SFI on Lane 4
Add static configuration for SFI+ 10Gbps interface on SERDES
Lane 4.
This is just a copy of Lane 2 static values, not optimized.
Board-to-board iperf test shows up to 6Gbps transfer speed.
Change-Id: I024d2ac132f7fa6c342a64367f3dca2123a27e97
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Diffstat (limited to 'plat/marvell')
-rw-r--r-- | plat/marvell/a8k/a80x0/board/phy-porting-layer.h | 18 |
1 files changed, 16 insertions, 2 deletions
diff --git a/plat/marvell/a8k/a80x0/board/phy-porting-layer.h b/plat/marvell/a8k/a80x0/board/phy-porting-layer.h index 38497fb5..abd85b5d 100644 --- a/plat/marvell/a8k/a80x0/board/phy-porting-layer.h +++ b/plat/marvell/a8k/a80x0/board/phy-porting-layer.h @@ -27,7 +27,14 @@ static const struct xfi_params .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, .valid = 0x1 }, /* Comphy2 */ { 0 }, /* Comphy3 */ - { 0 }, /* Comphy4 */ + { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf, + .align90 = 0x5f, + .g1_dfe_res = 0x2, .g1_amp = 0x1c, .g1_emph = 0xe, + .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x1, .g1_tx_emph = 0x0, + .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0, + .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, + .valid = 0x1 }, /* Comphy4 */ { 0 }, /* Comphy5 */ }, @@ -44,7 +51,14 @@ static const struct xfi_params .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, .valid = 0x1 }, /* Comphy2 */ { 0 }, /* Comphy3 */ - { 0 }, /* Comphy4 */ + { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf, + .align90 = 0x5f, + .g1_dfe_res = 0x2, .g1_amp = 0x1c, .g1_emph = 0xe, + .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1, + .g1_tx_emph_en = 0x1, .g1_tx_emph = 0x0, + .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0, + .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, + .valid = 0x1 }, /* Comphy4 */ { 0 }, /* Comphy5 */ }, }, |