plat: imx8m: refactor the code to make it reusable

for the i.MX8M SOCs, part of the code for gpc
and PSCI implementation can be reused and make it
common for all these SoCs. this patch extracts
the common part for reuse.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>

1 files changed, 0 insertions, 80 deletions

diff --git a/plat/imx/imx8m/imx8mq/gpc.c b/plat/imx/imx8m/imx8mq/gpc.c
index 7fa5a3d1..02c640b5 100644
--- a/plat/imx/imx8m/imx8mq/gpc.c
+++ b/plat/imx/imx8m/imx8mq/gpc.c
@@ -16,19 +16,6 @@
 
 #include <gpc.h>
 
-void imx_set_cpu_secure_entry(unsigned int core_id, uintptr_t sec_entrypoint)
-{
-	uint64_t temp_base;
-
-	temp_base = (uint64_t) sec_entrypoint;
-	temp_base >>= 2;
-
-	mmio_write_32(IMX_SRC_BASE + SRC_GPR1_OFFSET + (core_id << 3),
-		((uint32_t)(temp_base >> 22) & 0xffff));
-	mmio_write_32(IMX_SRC_BASE + SRC_GPR1_OFFSET + (core_id << 3) + 4,
-		((uint32_t)temp_base & 0x003fffff));
-}
-
 /* use wfi power down the core */
 void imx_set_cpu_pwr_off(unsigned int core_id)
 {
@@ -39,28 +26,6 @@ void imx_set_cpu_pwr_off(unsigned int core_id)
 	mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
 };
 
-/* use the sw method to power up the core */
-void imx_set_cpu_pwr_on(unsigned int core_id)
-{
-	/* clear the wfi power down bit of the core */
-	mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id));
-	/* assert the ncpuporeset */
-	mmio_clrbits_32(IMX_SRC_BASE + SRC_A53RCR1, (1 << core_id));
-	/* assert the pcg pcr bit of the core */
-	mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
-	/* sw power up the core */
-	mmio_setbits_32(IMX_GPC_BASE + CPU_PGC_UP_TRG, (1 << core_id));
-
-	/* wait for the power up finished */
-	while ((mmio_read_32(IMX_GPC_BASE + CPU_PGC_UP_TRG) & (1 << core_id)) != 0)
-		;
-
-	/* deassert the pcg pcr bit of the core */
-	mmio_clrbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
-	/* deassert the ncpuporeset */
-	mmio_setbits_32(IMX_SRC_BASE + SRC_A53RCR1, (1 << core_id));
-}
-
 /* if out of lpm, we need to do reverse steps */
 void imx_set_cpu_lpm(unsigned int core_id, bool pdn)
 {
@@ -79,11 +44,6 @@ void imx_set_cpu_lpm(unsigned int core_id, bool pdn)
 	}
 }
 
-void imx_set_sys_wakeup(unsigned int last_core, bool pdn)
-{
-	/* TODO */
-}
-
 void imx_pup_pdn_slot_config(int last_core, bool pdn)
 {
 	if (pdn) {
@@ -105,18 +65,6 @@ void imx_pup_pdn_slot_config(int last_core, bool pdn)
 	}
 }
 
-void imx_set_cluster_standby(bool retention)
-{
-	/*
-	 * Enable BIT 6 of A53 AD register to make sure system
-	 * don't enter LPM mode.
-	 */
-	if (retention)
-		mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_AD, (1 << 6));
-	else
-		mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_AD, (1 << 6));
-}
-
 void imx_set_cluster_powerdown(unsigned int last_core, uint8_t power_state)
 {
 	uint32_t val;
@@ -166,34 +114,6 @@ void imx_set_cluster_powerdown(unsigned int last_core, uint8_t power_state)
 	}
 }
 
-/* config the system level power mode */
-void imx_set_sys_lpm(bool retention)
-{
-	uint32_t val;
-
-	/* set system DSM mode SLPCR(0x14) */
-	val = mmio_read_32(IMX_GPC_BASE + SLPCR);
-	val &= ~(SLPCR_EN_DSM | SLPCR_VSTBY | SLPCR_SBYOS |
-		 SLPCR_BYPASS_PMIC_READY | SLPCR_RBC_EN);
-
-	if (retention)
-		val |= (SLPCR_EN_DSM | SLPCR_VSTBY | SLPCR_SBYOS |
-			 SLPCR_BYPASS_PMIC_READY | SLPCR_RBC_EN |
-			 SLPCR_A53_FASTWUP_STOP_MODE);
-
-	mmio_write_32(IMX_GPC_BASE + SLPCR, val);
-}
-
-void imx_set_rbc_count(void)
-{
-	mmio_setbits_32(IMX_GPC_BASE + SLPCR, 0x3f << SLPCR_RBC_COUNT_SHIFT);
-}
-
-void imx_clear_rbc_count(void)
-{
-	mmio_clrbits_32(IMX_GPC_BASE + SLPCR, 0x3f << SLPCR_RBC_COUNT_SHIFT);
-}
-
 void imx_gpc_init(void)
 {
 	uint32_t val;