plat: imx8m: Add the basic support for imx8mm

The i.MX8M Mini is new SOC of the i.MX8M family. it is
focused on delivering the latest and greatest video and
audio experience combining state-of-the-art media-specific
features with high-performance processing while optimized
for lowest power consumption. The i.MX 8M Mini Media Applications
Processor is  14nm FinFET product of the growing i.MX8M family
targeting the consumer & industrial market. It is built in 14LPP
to achieve both high performance and low power consumption
and relies on a powerful fully coherent core complex based on
a quad Cortex-A53 cluster with video and graphics accelerators

this patch add the basic support for i.MX8MM.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>

1 files changed, 146 insertions, 0 deletions

diff --git a/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c b/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c
new file mode 100644
index 00000000..a541ed37
--- /dev/null
+++ b/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdbool.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <context.h>
+#include <drivers/arm/tzc380.h>
+#include <drivers/console.h>
+#include <drivers/generic_delay_timer.h>
+#include <lib/el3_runtime/context_mgmt.h>
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables.h>
+#include <plat/common/platform.h>
+
+#include <gpc.h>
+#include <imx_uart.h>
+#include <plat_imx8.h>
+
+static const mmap_region_t imx_mmap[] = {
+	MAP_REGION_FLAT(IMX_GIC_BASE, IMX_GIC_SIZE, MT_DEVICE | MT_RW),
+	MAP_REGION_FLAT(IMX_AIPS_BASE, IMX_AIPS_SIZE, MT_DEVICE | MT_RW), /* AIPS map */
+	{0},
+};
+
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+/* get SPSR for BL33 entry */
+static uint32_t get_spsr_for_bl33_entry(void)
+{
+	unsigned long el_status;
+	unsigned long mode;
+	uint32_t spsr;
+
+	/* figure out what mode we enter the non-secure world */
+	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+	el_status &= ID_AA64PFR0_ELX_MASK;
+
+	mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+
+void bl31_tzc380_setup(void)
+{
+	unsigned int val;
+
+	val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x28);
+	if ((val & GPR_TZASC_EN) != GPR_TZASC_EN)
+		return;
+
+	tzc380_init(IMX_TZASC_BASE);
+
+	/*
+	 * Need to substact offset 0x40000000 from CPU address when
+	 * programming tzasc region for i.mx8mm.
+	 */
+
+	/* Enable 1G-5G S/NS RW */
+	tzc380_configure_region(0, 0x00000000, TZC_ATTR_REGION_SIZE(TZC_REGION_SIZE_4G) |
+		TZC_ATTR_REGION_EN_MASK | TZC_ATTR_SP_ALL);
+}
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+		u_register_t arg2, u_register_t arg3)
+{
+	static console_uart_t console;
+	int i;
+
+	/* Enable CSU NS access permission */
+	for (i = 0; i < 64; i++) {
+		mmio_write_32(IMX_CSU_BASE + i * 4, 0x00ff00ff);
+	}
+
+
+	console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
+		IMX_CONSOLE_BAUDRATE, &console);
+	/* This console is only used for boot stage */
+	console_set_scope(&console.console, CONSOLE_FLAG_BOOT);
+
+	/*
+	 * tell BL3-1 where the non-secure software image is located
+	 * and the entry state information.
+	 */
+	bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET;
+	bl33_image_ep_info.spsr = get_spsr_for_bl33_entry();
+	SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+
+	bl31_tzc380_setup();
+}
+
+void bl31_plat_arch_setup(void)
+{
+	mmap_add_region(BL31_BASE, BL31_BASE, (BL31_LIMIT - BL31_BASE),
+		MT_MEMORY | MT_RW | MT_SECURE);
+	mmap_add_region(BL_CODE_BASE, BL_CODE_BASE, (BL_CODE_END - BL_CODE_BASE),
+		MT_MEMORY | MT_RO | MT_SECURE);
+#if USE_COHERENT_MEM
+	mmap_add_region(BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_BASE,
+		(BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE),
+		MT_DEVICE | MT_RW | MT_SECURE);
+#endif
+	mmap_add(imx_mmap);
+
+	init_xlat_tables();
+
+	enable_mmu_el3(0);
+}
+
+void bl31_platform_setup(void)
+{
+	generic_delay_timer_init();
+
+	/* select the CKIL source to 32K OSC */
+	mmio_write_32(IMX_ANAMIX_BASE + ANAMIX_MISC_CTL, 0x1);
+
+	plat_gic_driver_init();
+	plat_gic_init();
+
+	imx_gpc_init();
+}
+
+entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type)
+{
+	if (type == NON_SECURE)
+		return &bl33_image_ep_info;
+	if (type == SECURE)
+		return &bl32_image_ep_info;
+
+	return NULL;
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	return COUNTER_FREQUENCY;
+}