Remove duplicated definitions of linker symbols

Many parts of the code were duplicating symbols that are defined in
include/common/bl_common.h. It is better to only use the definitions in
this header.

As all the symbols refer to virtual addresses, they have to be
uintptr_t, not unsigned long. This has also been fixed in bl_common.h.

Change-Id: I204081af78326ced03fb05f69846f229d324c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

6 files changed, 26 insertions, 118 deletions

diff --git a/plat/hisilicon/hikey/hikey_bl2_setup.c b/plat/hisilicon/hikey/hikey_bl2_setup.c
index b8723737..c57fea90 100644
--- a/plat/hisilicon/hikey/hikey_bl2_setup.c
+++ b/plat/hisilicon/hikey/hikey_bl2_setup.c
@@ -29,26 +29,7 @@
 #include <hisi_sram_map.h>
 #include "hikey_private.h"
 
-/*
- * The next 2 constants identify the extents of the code & RO data region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
- */
-#define BL2_RO_BASE (unsigned long)(&__RO_START__)
-#define BL2_RO_LIMIT (unsigned long)(&__RO_END__)
-
-#define BL2_RW_BASE		(BL2_RO_LIMIT)
-
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
+#define BL2_RW_BASE		(BL_CODE_END)
 
 static meminfo_t bl2_el3_tzram_layout;
 static console_pl011_t console;
@@ -295,10 +276,10 @@ void bl2_el3_plat_arch_setup(void)
 {
 	hikey_init_mmu_el3(bl2_el3_tzram_layout.total_base,
 			   bl2_el3_tzram_layout.total_size,
-			   BL2_RO_BASE,
-			   BL2_RO_LIMIT,
-			   BL2_COHERENT_RAM_BASE,
-			   BL2_COHERENT_RAM_LIMIT);
+			   BL_CODE_BASE,
+			   BL_CODE_END,
+			   BL_COHERENT_RAM_BASE,
+			   BL_COHERENT_RAM_END);
 }
 
 void bl2_platform_setup(void)
diff --git a/plat/hisilicon/hikey/hikey_bl31_setup.c b/plat/hisilicon/hikey/hikey_bl31_setup.c
index b2dcb619..0326e9f3 100644
--- a/plat/hisilicon/hikey/hikey_bl31_setup.c
+++ b/plat/hisilicon/hikey/hikey_bl31_setup.c
@@ -25,25 +25,6 @@
 
 #include "hikey_private.h"
 
-/*
- * The next 2 constants identify the extents of the code & RO data region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
- */
-#define BL31_RO_BASE (unsigned long)(&__RO_START__)
-#define BL31_RO_LIMIT (unsigned long)(&__RO_END__)
-
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
-
 static entry_point_info_t bl32_ep_info;
 static entry_point_info_t bl33_ep_info;
 static console_pl011_t console;
@@ -135,10 +116,10 @@ void bl31_plat_arch_setup(void)
 {
 	hikey_init_mmu_el3(BL31_BASE,
 			   BL31_LIMIT - BL31_BASE,
-			   BL31_RO_BASE,
-			   BL31_RO_LIMIT,
-			   BL31_COHERENT_RAM_BASE,
-			   BL31_COHERENT_RAM_LIMIT);
+			   BL_CODE_BASE,
+			   BL_CODE_END,
+			   BL_COHERENT_RAM_BASE,
+			   BL_COHERENT_RAM_END);
 }
 
 /* Initialize EDMAC controller with non-secure mode. */
diff --git a/plat/hisilicon/hikey960/hikey960_bl2_setup.c b/plat/hisilicon/hikey960/hikey960_bl2_setup.c
index 788392db..7102de85 100644
--- a/plat/hisilicon/hikey960/hikey960_bl2_setup.c
+++ b/plat/hisilicon/hikey960/hikey960_bl2_setup.c
@@ -28,26 +28,7 @@
 #include "hikey960_def.h"
 #include "hikey960_private.h"
 
-/*
- * The next 2 constants identify the extents of the code & RO data region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
- */
-#define BL2_RO_BASE (unsigned long)(&__RO_START__)
-#define BL2_RO_LIMIT (unsigned long)(&__RO_END__)
-
-#define BL2_RW_BASE		(BL2_RO_LIMIT)
-
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
-#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
+#define BL2_RW_BASE		(BL_CODE_END)
 
 static meminfo_t bl2_el3_tzram_layout;
 static console_pl011_t console;
@@ -312,10 +293,10 @@ void bl2_el3_plat_arch_setup(void)
 {
 	hikey960_init_mmu_el3(bl2_el3_tzram_layout.total_base,
 			      bl2_el3_tzram_layout.total_size,
-			      BL2_RO_BASE,
-			      BL2_RO_LIMIT,
-			      BL2_COHERENT_RAM_BASE,
-			      BL2_COHERENT_RAM_LIMIT);
+			      BL_CODE_BASE,
+			      BL_CODE_END,
+			      BL_COHERENT_RAM_BASE,
+			      BL_COHERENT_RAM_END);
 }
 
 void bl2_platform_setup(void)
diff --git a/plat/hisilicon/hikey960/hikey960_bl31_setup.c b/plat/hisilicon/hikey960/hikey960_bl31_setup.c
index 67b06f49..f1524b83 100644
--- a/plat/hisilicon/hikey960/hikey960_bl31_setup.c
+++ b/plat/hisilicon/hikey960/hikey960_bl31_setup.c
@@ -27,25 +27,6 @@
 #include "hikey960_def.h"
 #include "hikey960_private.h"
 
-/*
- * The next 2 constants identify the extents of the code & RO data region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
- */
-#define BL31_RO_BASE	(unsigned long)(&__RO_START__)
-#define BL31_RO_LIMIT	(unsigned long)(&__RO_END__)
-
-/*
- * The next 2 constants identify the extents of the coherent memory region.
- * These addresses are used by the MMU setup code and therefore they must be
- * page-aligned.  It is the responsibility of the linker script to ensure that
- * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
- * page-aligned addresses.
- */
-#define BL31_COHERENT_RAM_BASE	(unsigned long)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT	(unsigned long)(&__COHERENT_RAM_END__)
-
 static entry_point_info_t bl32_ep_info;
 static entry_point_info_t bl33_ep_info;
 static console_pl011_t console;
@@ -140,10 +121,10 @@ void bl31_plat_arch_setup(void)
 {
 	hikey960_init_mmu_el3(BL31_BASE,
 			BL31_LIMIT - BL31_BASE,
-			BL31_RO_BASE,
-			BL31_RO_LIMIT,
-			BL31_COHERENT_RAM_BASE,
-			BL31_COHERENT_RAM_LIMIT);
+			BL_CODE_BASE,
+			BL_CODE_END,
+			BL_COHERENT_RAM_BASE,
+			BL_COHERENT_RAM_END);
 }
 
 static void hikey960_edma_init(void)
diff --git a/plat/hisilicon/poplar/bl2_plat_setup.c b/plat/hisilicon/poplar/bl2_plat_setup.c
index ff8e107d..11403b07 100644
--- a/plat/hisilicon/poplar/bl2_plat_setup.c
+++ b/plat/hisilicon/poplar/bl2_plat_setup.c
@@ -24,14 +24,6 @@
 #include "hi3798cv200.h"
 #include "plat_private.h"
 
-/* Memory ranges for code and read only data sections */
-#define BL2_RO_BASE	(unsigned long)(&__RO_START__)
-#define BL2_RO_LIMIT	(unsigned long)(&__RO_END__)
-
-/* Memory ranges for coherent memory section */
-#define BL2_COHERENT_RAM_BASE	(unsigned long)(&__COHERENT_RAM_START__)
-#define BL2_COHERENT_RAM_LIMIT	(unsigned long)(&__COHERENT_RAM_END__)
-
 static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
 static console_pl011_t console;
 
@@ -206,10 +198,10 @@ void bl2_plat_arch_setup(void)
 {
 	plat_configure_mmu_el1(bl2_tzram_layout.total_base,
 			       bl2_tzram_layout.total_size,
-			       BL2_RO_BASE,
-			       BL2_RO_LIMIT,
-			       BL2_COHERENT_RAM_BASE,
-			       BL2_COHERENT_RAM_LIMIT);
+			       BL_CODE_BASE,
+			       BL_CODE_END,
+			       BL_COHERENT_RAM_BASE,
+			       BL_COHERENT_RAM_END);
 }
 
 void bl2_platform_setup(void)
diff --git a/plat/hisilicon/poplar/bl31_plat_setup.c b/plat/hisilicon/poplar/bl31_plat_setup.c
index 69911e8d..f81078f0 100644
--- a/plat/hisilicon/poplar/bl31_plat_setup.c
+++ b/plat/hisilicon/poplar/bl31_plat_setup.c
@@ -25,14 +25,6 @@
 #include "hi3798cv200.h"
 #include "plat_private.h"
 
-/* Memory ranges for code and RO data sections */
-#define BL31_RO_BASE	(unsigned long)(&__RO_START__)
-#define BL31_RO_LIMIT	(unsigned long)(&__RO_END__)
-
-/* Memory ranges for coherent memory section */
-#define BL31_COHERENT_RAM_BASE	(unsigned long)(&__COHERENT_RAM_START__)
-#define BL31_COHERENT_RAM_LIMIT	(unsigned long)(&__COHERENT_RAM_END__)
-
 #define TZPC_SEC_ATTR_CTRL_VALUE (0x9DB98D45)
 
 static entry_point_info_t bl32_image_ep_info;
@@ -133,10 +125,10 @@ void bl31_plat_arch_setup(void)
 {
 	plat_configure_mmu_el3(BL31_BASE,
 			       (BL31_LIMIT - BL31_BASE),
-			       BL31_RO_BASE,
-			       BL31_RO_LIMIT,
-			       BL31_COHERENT_RAM_BASE,
-			       BL31_COHERENT_RAM_LIMIT);
+			       BL_CODE_BASE,
+			       BL_CODE_END,
+			       BL_COHERENT_RAM_BASE,
+			       BL_COHERENT_RAM_END);
 
 	INFO("Boot BL33 from 0x%lx for %lu Bytes\n",
 	     bl33_image_ep_info.pc, bl33_image_ep_info.args.arg2);