Changes to support execution in AArch32 state for JUNO

Following steps are required to boot JUNO in AArch32 state:
1> BL1, in AArch64 state, loads BL2.
2> BL2, in AArch64 state, initializes DDR.
  Loads SP_MIN & BL33 (AArch32 executable)images.
  Calls RUN_IMAGE SMC to go back to BL1.
3> BL1 writes AArch32 executable opcodes, to load and branch
  at the entrypoint address of SP_MIN, at HI-VECTOR address and
  then request for warm reset in AArch32 state using RMR_EL3.

This patch makes following changes to facilitate above steps:
* Added assembly function to carry out step 3 above.
* Added region in TZC that enables Secure access to the
  HI-VECTOR(0xFFFF0000) address space.
* AArch32 image descriptor is used, in BL2, to load
  SP_MIN and BL33 AArch32 executable images.

A new flag `JUNO_AARCH32_EL3_RUNTIME` is introduced that
controls above changes. By default this flag is disabled.

NOTE: BL1 and BL2 are not supported in AArch32 state for JUNO.

Change-Id: I091d56a0e6d36663e6d9d2bb53c92c672195d1ec
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

7 files changed, 195 insertions, 9 deletions

diff --git a/plat/arm/board/juno/aarch64/juno_helpers.S b/plat/arm/board/juno/aarch64/juno_helpers.S
index ac54ac9b..49fef16f 100644
--- a/plat/arm/board/juno/aarch64/juno_helpers.S
+++ b/plat/arm/board/juno/aarch64/juno_helpers.S
@@ -34,12 +34,18 @@
 #include <cortex_a53.h>
 #include <cortex_a57.h>
 #include <cortex_a72.h>
+#include <cpu_macros.S>
+#include <css_def.h>
 #include <v2m_def.h>
 #include "../juno_def.h"
 
 
 	.globl	plat_reset_handler
 	.globl	plat_arm_calc_core_pos
+#if JUNO_AARCH32_EL3_RUNTIME
+	.globl	plat_get_my_entrypoint
+	.globl	juno_reset_to_aarch32_state
+#endif
 
 #define JUNO_REVISION(rev)	REV_JUNO_R##rev
 #define JUNO_HANDLER(rev)	plat_reset_handler_juno_r##rev
@@ -206,6 +212,20 @@ func plat_reset_handler
 endfunc plat_reset_handler
 
 	/* -----------------------------------------------------
+	 *  void juno_do_reset_to_aarch32_state(void);
+	 *
+	 *  Request warm reset to AArch32 mode.
+	 * -----------------------------------------------------
+	 */
+func juno_do_reset_to_aarch32_state
+	mov	x0, #RMR_EL3_RR_BIT
+	dsb	sy
+	msr	rmr_el3, x0
+	isb
+	wfi
+endfunc juno_do_reset_to_aarch32_state
+
+	/* -----------------------------------------------------
 	 *  unsigned int plat_arm_calc_core_pos(u_register_t mpidr)
 	 *  Helper function to calculate the core position.
 	 * -----------------------------------------------------
@@ -213,3 +233,77 @@ endfunc plat_reset_handler
 func plat_arm_calc_core_pos
 	b	css_calc_core_pos_swap_cluster
 endfunc plat_arm_calc_core_pos
+
+#if JUNO_AARCH32_EL3_RUNTIME
+	/* ---------------------------------------------------------------------
+	 * uintptr_t plat_get_my_entrypoint (void);
+	 *
+	 * Main job of this routine is to distinguish between a cold and a warm
+	 * boot. On JUNO platform, this distinction is based on the contents of
+	 * the Trusted Mailbox. It is initialised to zero by the SCP before the
+	 * AP cores are released from reset. Therefore, a zero mailbox means
+	 * it's a cold reset. If it is a warm boot then a request to reset to
+	 * AArch32 state is issued. This is the only way to reset to AArch32
+	 * in EL3 on Juno. A trampoline located at the high vector address
+	 * has already been prepared by BL1.
+	 *
+	 * This functions returns the contents of the mailbox, i.e.:
+	 *  - 0 for a cold boot;
+	 *  - request warm reset in AArch32 state for warm boot case;
+	 * ---------------------------------------------------------------------
+	 */
+func plat_get_my_entrypoint
+	mov_imm	x0, PLAT_ARM_TRUSTED_MAILBOX_BASE
+	ldr	x0, [x0]
+	cbz	x0, return
+	b	juno_do_reset_to_aarch32_state
+1:
+	b	1b
+return:
+	ret
+endfunc plat_get_my_entrypoint
+
+/*
+ * Emit a "movw r0, #imm16" which moves the lower
+ * 16 bits of `_val` into r0.
+ */
+.macro emit_movw _reg_d, _val
+	mov_imm	\_reg_d, (0xe3000000 | \
+			((\_val & 0xfff) | \
+			((\_val & 0xf000) << 4)))
+.endm
+
+/*
+ * Emit a "movt r0, #imm16" which moves the upper
+ * 16 bits of `_val` into r0.
+ */
+.macro emit_movt _reg_d, _val
+	mov_imm	\_reg_d, (0xe3400000 | \
+			(((\_val & 0x0fff0000) >> 16) | \
+			((\_val & 0xf0000000) >> 12)))
+.endm
+
+/*
+ * This function writes the trampoline code at HI-VEC (0xFFFF0000)
+ * address which loads r0 with the entrypoint address for
+ * BL32 (a.k.a SP_MIN) when EL3 is in AArch32 mode. A warm reset
+ * to AArch32 mode is then requested by writing into RMR_EL3.
+ */
+func juno_reset_to_aarch32_state
+	emit_movw	w0, BL32_BASE
+	emit_movt	w1, BL32_BASE
+	/* opcode "bx r0" to branch using r0 in AArch32 mode */
+	mov_imm	w2, 0xe12fff10
+
+	/* Write the above opcodes at HI-VECTOR location */
+	mov_imm	x3, HI_VECTOR_BASE
+	str	w0, [x3], #4
+	str	w1, [x3], #4
+	str	w2, [x3]
+
+	bl	juno_do_reset_to_aarch32_state
+1:
+	b	1b
+endfunc juno_reset_to_aarch32_state
+
+#endif /* JUNO_AARCH32_EL3_RUNTIME */
diff --git a/plat/arm/board/juno/juno_bl1_setup.c b/plat/arm/board/juno/juno_bl1_setup.c
index e805c9a3..93ca1c31 100644
--- a/plat/arm/board/juno/juno_bl1_setup.c
+++ b/plat/arm/board/juno/juno_bl1_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -32,11 +32,15 @@
 #include <errno.h>
 #include <platform.h>
 #include <plat_arm.h>
+#include <sp805.h>
 #include <tbbr_img_def.h>
 #include <v2m_def.h>
 
 #define RESET_REASON_WDOG_RESET		(0x2)
 
+void juno_reset_to_aarch32_state(void);
+
+
 /*******************************************************************************
  * The following function checks if Firmware update is needed,
  * by checking if TOC in FIP image is valid or watchdog reset happened.
@@ -85,3 +89,15 @@ __dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved)
 	while (1)
 		wfi();
 }
+
+#if JUNO_AARCH32_EL3_RUNTIME
+void bl1_plat_prepare_exit(entry_point_info_t *ep_info)
+{
+#if !ARM_DISABLE_TRUSTED_WDOG
+	/* Disable watchdog before leaving BL1 */
+	sp805_stop(ARM_SP805_TWDG_BASE);
+#endif
+
+	juno_reset_to_aarch32_state();
+}
+#endif /* JUNO_AARCH32_EL3_RUNTIME */
diff --git a/plat/arm/board/juno/juno_bl2_setup.c b/plat/arm/board/juno/juno_bl2_setup.c
new file mode 100644
index 00000000..ffb6387e
--- /dev/null
+++ b/plat/arm/board/juno/juno_bl2_setup.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <bl_common.h>
+#include <desc_image_load.h>
+#include <plat_arm.h>
+
+#if JUNO_AARCH32_EL3_RUNTIME
+/*******************************************************************************
+ * This function changes the spsr for BL32 image to bypass
+ * the check in BL1 AArch64 exception handler. This is needed in the aarch32
+ * boot flow as the core comes up in aarch64 and to enter the BL32 image a warm
+ * reset in aarch32 state is required.
+ ******************************************************************************/
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	int err = arm_bl2_handle_post_image_load(image_id);
+
+	if (!err && (image_id == BL32_IMAGE_ID)) {
+		bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+		assert(bl_mem_params);
+		bl_mem_params->ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+			DISABLE_ALL_EXCEPTIONS);
+	}
+
+	return err;
+}
+#endif /* JUNO_AARCH32_EL3_RUNTIME */
diff --git a/plat/arm/board/juno/platform.mk b/plat/arm/board/juno/platform.mk
index 39977240..08554381 100644
--- a/plat/arm/board/juno/platform.mk
+++ b/plat/arm/board/juno/platform.mk
@@ -48,8 +48,14 @@ endif
 
 PLAT_INCLUDES		:=	-Iplat/arm/board/juno/include
 
-PLAT_BL_COMMON_SOURCES	:=	plat/arm/board/juno/aarch64/juno_helpers.S
+PLAT_BL_COMMON_SOURCES	:=	plat/arm/board/juno/${ARCH}/juno_helpers.S
 
+# Flag to enable support for AArch32 state on JUNO
+JUNO_AARCH32_EL3_RUNTIME	:=	0
+$(eval $(call assert_boolean,JUNO_AARCH32_EL3_RUNTIME))
+$(eval $(call add_define,JUNO_AARCH32_EL3_RUNTIME))
+
+ifeq (${ARCH},aarch64)
 BL1_SOURCES		+=	lib/cpus/aarch64/cortex_a53.S		\
 				lib/cpus/aarch64/cortex_a57.S		\
 				lib/cpus/aarch64/cortex_a72.S		\
@@ -59,6 +65,7 @@ BL1_SOURCES		+=	lib/cpus/aarch64/cortex_a53.S		\
 				${JUNO_SECURITY_SOURCES}
 
 BL2_SOURCES		+=	plat/arm/board/juno/juno_err.c		\
+				plat/arm/board/juno/juno_bl2_setup.c	\
 				${JUNO_SECURITY_SOURCES}
 
 BL2U_SOURCES		+=	${JUNO_SECURITY_SOURCES}
@@ -71,6 +78,7 @@ BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a53.S		\
 				${JUNO_GIC_SOURCES}			\
 				${JUNO_INTERCONNECT_SOURCES}		\
 				${JUNO_SECURITY_SOURCES}
+endif
 
 # Enable workarounds for selected Cortex-A53 and A57 errata.
 ERRATA_A53_855873		:=	1
diff --git a/plat/arm/common/arm_bl1_setup.c b/plat/arm/common/arm_bl1_setup.c
index 8c1fde43..ffbf113b 100644
--- a/plat/arm/common/arm_bl1_setup.c
+++ b/plat/arm/common/arm_bl1_setup.c
@@ -44,6 +44,7 @@
 #pragma weak bl1_plat_arch_setup
 #pragma weak bl1_platform_setup
 #pragma weak bl1_plat_sec_mem_layout
+#pragma weak bl1_plat_prepare_exit
 
 
 /* Data structure which holds the extents of the trusted SRAM for BL1*/
diff --git a/plat/arm/common/arm_bl2_setup.c b/plat/arm/common/arm_bl2_setup.c
index 007108d1..66e350aa 100644
--- a/plat/arm/common/arm_bl2_setup.c
+++ b/plat/arm/common/arm_bl2_setup.c
@@ -249,11 +249,7 @@ void bl2_plat_arch_setup(void)
 }
 
 #if LOAD_IMAGE_V2
-/*******************************************************************************
- * This function can be used by the platforms to update/use image
- * information for given `image_id`.
- ******************************************************************************/
-int bl2_plat_handle_post_image_load(unsigned int image_id)
+int arm_bl2_handle_post_image_load(unsigned int image_id)
 {
 	int err = 0;
 	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
@@ -286,6 +282,15 @@ int bl2_plat_handle_post_image_load(unsigned int image_id)
 	return err;
 }
 
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return arm_bl2_handle_post_image_load(image_id);
+}
+
 #else /* LOAD_IMAGE_V2 */
 
 /*******************************************************************************
diff --git a/plat/arm/common/arm_common.mk b/plat/arm/common/arm_common.mk
index 891e2fbd..f7ec57ef 100644
--- a/plat/arm/common/arm_common.mk
+++ b/plat/arm/common/arm_common.mk
@@ -137,8 +137,14 @@ BL2_SOURCES		+=	drivers/io/io_fip.c				\
 				plat/arm/common/arm_bl2_setup.c			\
 				plat/arm/common/arm_io_storage.c
 ifeq (${LOAD_IMAGE_V2},1)
-BL2_SOURCES		+=	plat/arm/common/${ARCH}/arm_bl2_mem_params_desc.c\
-				plat/arm/common/arm_image_load.c		\
+# Because BL1/BL2 execute in AArch64 mode but BL32 in AArch32 we need to use
+# the AArch32 descriptors.
+ifeq (${JUNO_AARCH32_EL3_RUNTIME},1)
+BL2_SOURCES		+=	plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
+else
+BL2_SOURCES		+=	plat/arm/common/${ARCH}/arm_bl2_mem_params_desc.c
+endif
+BL2_SOURCES		+=	plat/arm/common/arm_image_load.c		\
 				common/desc_image_load.c
 endif