doc: Convert internal links to RST format

Currently links between documents are using the format:

<path/to/><filename>.rst

This was required for services like GitHub because they render each
document in isolation - linking to another document is like linking
to any other file, just provide the full path.

However, with the new approach, the .rst files are only the raw
source for the documents. Once the documents have been rendered
the output is now in another format (HTML in our case) and so,
when linking to another document, the link must point to the
rendered version and not the .rst file.

The RST spec provides a few methods for linking between content.
The parent of this patch enabled the automatic creation of anchors
for document titles - we will use these anchors as the targets for
our links. Additional anchors can be added by hand if needed, on
section and sub-section titles, for example.

An example of this new format, for a document with the title
"Firmware Design" is :ref:`Firmware Design`.

One big advantage of this is that anchors are not dependent on
paths. We can then move documents around, even between directories,
without breaking any links between documents. Links will need to be
updated only if the title of a document changes.

Change-Id: I9e2340a61dd424cbd8fd1ecc2dc166f460d81703
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

6 files changed, 65 insertions, 65 deletions

diff --git a/docs/process/contributing.rst b/docs/process/contributing.rst
index 66b282c9..fdb702ff 100644
--- a/docs/process/contributing.rst
+++ b/docs/process/contributing.rst
@@ -13,8 +13,8 @@ Getting Started
       raise a separate `issue`_ for this and ensure that the changes that
       include Third Party IP are made on a separate topic branch.
 
--  Clone `Trusted Firmware-A`_ on your own machine as suggested on the
-   `User Guide`_.
+-  Clone `Trusted Firmware-A`_ on your own machine as suggested in the
+   :ref:`User Guide`.
 -  Create a local topic branch based on the `Trusted Firmware-A`_ ``master``
    branch.
 
@@ -23,11 +23,11 @@ Making Changes
 
 -  Make commits of logical units. See these general `Git guidelines`_ for
    contributing to a project.
--  Follow the `Coding Guidelines`_.
+-  Follow the :ref:`Coding Style & Guidelines`.
 
    -  Use the checkpatch.pl script provided with the Linux source tree. A
       Makefile target is provided for convenience (see the "Checking source code
-      style" section in the `User Guide`_).
+      style" section in the :ref:`User Guide`).
 
 -  Keep the commits on topic. If you need to fix another bug or make another
    enhancement, please create a separate `issue`_ and address it on a separate
@@ -38,12 +38,12 @@ Making Changes
    an `issue`_, include a reference.
 -  Where appropriate, please update the documentation.
 
-   -  Consider whether the `User Guide`_, `Porting Guide`_, `Firmware Design`_
-      or other in-source documentation needs updating.
+   -  Consider whether the :ref:`User Guide`, :ref:`Porting Guide`,
+      :ref:`Firmware Design` or other in-source documentation needs updating.
    -  Ensure that each changed file has the correct copyright and license
       information. Files that entirely consist of contributions to this
       project should have a copyright notice and BSD-3-Clause SPDX license
-      identifier of the form as shown in `license.rst`_. Files that contain
+      identifier of the form as shown in :ref:`license`. Files that contain
       changes to imported Third Party IP files should retain their original
       copyright and license notices. For significant contributions you may
       add your own copyright notice in following format:
@@ -57,13 +57,13 @@ Making Changes
       your company name.
    -  If you are submitting new files that you intend to be the technical
       sub-maintainer for (for example, a new platform port), then also update
-      the `Maintainers`_ file.
+      the :ref:`maintainers` file.
    -  For topics with multiple commits, you should make all documentation
       changes (and nothing else) in the last commit of the series. Otherwise,
       include the documentation changes within the single commit.
 
 -  Please test your changes. As a minimum, ensure that Linux boots on the
-   Foundation FVP. See `Running the software on FVP`_ for more information. For
+   Foundation FVP. See :ref:`user_guide_run_fvp` for more information. For
    more extensive testing, consider running the `TF-A Tests`_ against your
    patches.
 
@@ -75,13 +75,14 @@ Submitting Changes
    ``Signed-off-by:`` and ``Author:`` lines must match. If anyone else
    contributes to the commit, they must also add their own ``Signed-off-by:``
    line. By adding this line the contributor certifies the contribution is made
-   under the terms of the `Developer Certificate of Origin (DCO)`_.
+   under the terms of the
+   :download:`Developer Certificate of Origin <../../dco.txt>`.
 
    More details may be found in the `Gerrit Signed-off-by Lines guidelines`_.
 
 -  Ensure that each commit also has a unique ``Change-Id:`` line. If you have
    cloned the repository with the "`Clone with commit-msg hook`" clone method
-   (as advised on the `User Guide`_), this should already be the case.
+   (as advised on the :ref:`User Guide`), this should already be the case.
 
    More details may be found in the `Gerrit Change-Ids documentation`_.
 
@@ -89,22 +90,22 @@ Submitting Changes
    targeting the ``integration`` branch.
 
    -  The changes will then undergo further review and testing by the
-      `Maintainers`_. Any review comments will be made directly on your patch.
-      This may require you to do some rework.
+      :ref:`maintainers`. Any review comments will be made directly on your
+      patch. This may require you to do some rework.
 
    Refer to the `Gerrit Uploading Changes documentation`_ for more details.
 
--  When the changes are accepted, the `Maintainers`_ will integrate them.
+-  When the changes are accepted, the :ref:`maintainers` will integrate them.
 
-   -  Typically, the `Maintainers`_ will merge the changes into the
+   -  Typically, the :ref:`maintainers` will merge the changes into the
       ``integration`` branch.
    -  If the changes are not based on a sufficiently-recent commit, or if they
-      cannot be automatically rebased, then the `Maintainers`_ may rebase it on
-      the ``master`` branch or ask you to do so.
+      cannot be automatically rebased, then the :ref:`maintainers` may rebase it
+      on the ``master`` branch or ask you to do so.
    -  After final integration testing, the changes will make their way into the
       ``master`` branch. If a problem is found during integration, the merge
       commit will be removed from the ``integration`` branch and the
-      `Maintainers`_ will ask you to create a new patch set to resolve the
+      :ref:`maintainers` will ask you to create a new patch set to resolve the
       problem.
 
 Binary Components
@@ -132,15 +133,6 @@ Binary Components
 .. _issue: https://developer.trustedfirmware.org/project/board/1/
 .. _Trusted Firmware-A: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
 .. _Git guidelines: http://git-scm.com/book/ch5-2.html
-.. _Coding Guidelines: ./coding-guidelines.rst
-.. _User Guide: ../getting_started/user-guide.rst
-.. _Porting Guide: ../getting_started/porting-guide.rst
-.. _Firmware Design: ../design/firmware-design.rst
-.. _license.rst: ../license.rst
-.. _Acknowledgements: ../acknowledgements.rst
-.. _Maintainers: ../maintainers.rst
-.. _Running the software on FVP: ../getting_started/user-guide.rst#user-content-running-the-software-on-fvp
-.. _Developer Certificate of Origin (DCO): ../../dco.txt
 .. _Gerrit Uploading Changes documentation: https://review.trustedfirmware.org/Documentation/user-upload.html
 .. _Gerrit Signed-off-by Lines guidelines: https://review.trustedfirmware.org/Documentation/user-signedoffby.html
 .. _Gerrit Change-Ids documentation: https://review.trustedfirmware.org/Documentation/user-changeid.html
diff --git a/docs/process/faq.rst b/docs/process/faq.rst
index 6aa04f0a..2c365848 100644
--- a/docs/process/faq.rst
+++ b/docs/process/faq.rst
@@ -37,7 +37,7 @@ This can vary a lot, depending on:
   conflict between the topics.
 
 * If there is a code freeze in place in preparation for the release. Please
-  refer the `release information`_ for more details.
+  refer the :ref:`Release Processes` document for more details.
 
 * The workload of the TF maintainers.
 
@@ -55,9 +55,9 @@ receiving patches that will not be merged into the release. In this case, the
 patches will be merged onto ``integration``, which will temporarily diverge from
 the release branch. The ``integration`` branch will be rebased onto ``master``
 after the release, and then ``master`` will be fast-forwarded to ``integration``
-1-2 days later. This whole process could take up 4 weeks. Please refer the
-`release information`_ for code freeze dates. The TF maintainers will inform the
-patch owner if this is going to happen.
+1-2 days later. This whole process could take up 4 weeks. Please refer to the
+:ref:`Release Processes` document for code freeze dates. The TF maintainers
+will inform the patch owner if this is going to happen.
 
 It is OK to create a patch based on commits that are only available in
 ``integration`` or another patch set, rather than ``master``. There is a risk
@@ -73,7 +73,10 @@ but would be after the CI has been transitioned to `trustedfirmware.org`_.
 Please refer to https://github.com/ARM-software/tf-issues/issues/681 for more
 details on the timelines.
 
-.. _release information: release-information.rst
+--------------
+
+*Copyright (c) 2019, Arm Limited. All rights reserved.*
+
 .. _Gerrit Upload Patch Set documentation: https://review.trustedfirmware.org/Documentation/intro-user.html#upload-patch-set
 .. _Gerrit Replace Changes documentation: https://review.trustedfirmware.org/Documentation/user-upload.html#push_replace
 .. _trustedfirmware.org: https://www.trustedfirmware.org/
diff --git a/docs/process/platform-compatibility-policy.rst b/docs/process/platform-compatibility-policy.rst
index a11ba386..be1f9bac 100644
--- a/docs/process/platform-compatibility-policy.rst
+++ b/docs/process/platform-compatibility-policy.rst
@@ -11,7 +11,7 @@ Platform compatibility policy
 -----------------------------
 
 Platform compatibility is mainly affected by changes to Platform APIs (as
-documented in the `Porting Guide`_), driver APIs (like the GICv3 drivers) or
+documented in the :ref:`Porting Guide`), driver APIs (like the GICv3 drivers) or
 library interfaces (like xlat_table library). The project will try to maintain
 compatibility for upstream platforms. Due to evolving requirements and
 enhancements, there might be changes affecting platform compatibility which
@@ -20,7 +20,7 @@ introduced to replace it. In case the migration to the new interface is trivial,
 the contributor of the change is expected to make good effort to migrate the
 upstream platforms to the new interface.
 
-The deprecated interfaces are listed inside `Release information`_ as well as
+The deprecated interfaces are listed inside :ref:`Release Processes` as well as
 the release after which each one will be removed. When an interface is
 deprecated, the page must be updated to indicate the release after which the
 interface will be removed. This must be at least 1 full release cycle in future.
@@ -33,6 +33,4 @@ the deprecated interface.
 
 *Copyright (c) 2018-2019, Arm Limited and Contributors. All rights reserved.*
 
-.. _Porting Guide: ../getting_started/porting-guide.rst
-.. _Release information: ./release-information.rst#removal-of-deprecated-interfaces
 .. _TF-A public mailing list: https://lists.trustedfirmware.org/mailman/listinfo/tf-a
diff --git a/docs/process/release-information.rst b/docs/process/release-information.rst
index b81d42d5..e264e51a 100644
--- a/docs/process/release-information.rst
+++ b/docs/process/release-information.rst
@@ -42,9 +42,9 @@ depending on project requirement and partner feedback.
 Removal of Deprecated Interfaces
 --------------------------------
 
-As mentioned in the `Platform compatibility policy`_, this is a live document
-cataloging all the deprecated interfaces in TF-A project and the Release version
-after which it will be removed.
+As mentioned in the :ref:`Platform Compatibility Policy`, this is a live
+document cataloging all the deprecated interfaces in TF-A project and the
+Release version after which it will be removed.
 
 +--------------------------------+-------------+---------+---------------------------------------------------------+
 | Interface                      | Deprecation | Removed | Comments                                                |
@@ -54,7 +54,7 @@ after which it will be removed.
 | Legacy Console API             | Jan '18     | v2.1    | Deprecated in favour of ``MULTI_CONSOLE_API``           |
 +--------------------------------+-------------+---------+---------------------------------------------------------+
 | Weak default                   | Oct '18     | v2.1    | The default implementations are defined in              |
-| ``plat_crash_console_*``       |             |         | `crash_console_helpers.S`_. The platforms have to       |
+| ``plat_crash_console_*``       |             |         | ``crash_console_helpers.S``. The platforms have to      |
 | APIs                           |             |         | define ``plat_crash_console_*``.                        |
 +--------------------------------+-------------+---------+---------------------------------------------------------+
 | ``finish_console_register``    | Oct '18     | v2.1    | The old version of the macro is deprecated. See commit  |
@@ -74,9 +74,9 @@ after which it will be removed.
 | Makefile in ``INCLUDES``.      |             |         | header files. More information in commit 09d40e0e0828_. |
 +--------------------------------+-------------+---------+---------------------------------------------------------+
 
+--------------
+
 *Copyright (c) 2018-2019, Arm Limited and Contributors. All rights reserved.*
 
-.. _Platform compatibility policy: platform-compatibility-policy.rst
-.. _crash_console_helpers.S: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/plat/common/aarch64/crash_console_helpers.S
 .. _cc5859c: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=cc5859ca19ff546c35eb0331000dae090b6eabcf
 .. _09d40e0e0828: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=09d40e0e08283a249e7dce0e106c07c5141f9b7e
diff --git a/docs/process/security-hardening.rst b/docs/process/security-hardening.rst
index e2c68b8f..1a5524fd 100644
--- a/docs/process/security-hardening.rst
+++ b/docs/process/security-hardening.rst
@@ -9,7 +9,7 @@ Build options
 -------------
 
 Several build options can be used to check for security issues. Refer to the
-`user guide`_ for detailed information on the specific build options.
+:ref:`User Guide` for detailed information on the specific build options.
 
 - The ``BRANCH_PROTECTION`` build flag can be used to enable Pointer
   Authentication and Branch Target Identification.
@@ -53,6 +53,6 @@ Several build options can be used to check for security issues. Refer to the
   NB: The ``Werror`` flag is enabled by default in TF-A and can be disabled by
   setting the ``E`` build flag to 0.
 
-*Copyright (c) 2019, Arm Limited. All rights reserved.*
+--------------
 
-.. _user guide: ../getting_started/user-guide.rst
+*Copyright (c) 2019, Arm Limited. All rights reserved.*
diff --git a/docs/process/security.rst b/docs/process/security.rst
index 94eb9c3b..c3935daa 100644
--- a/docs/process/security.rst
+++ b/docs/process/security.rst
@@ -38,9 +38,11 @@ Please include:
 
   - Any additional software or tools required
 
-We recommend using `this PGP/GPG key`_ for encrypting the information. This key
-is also available at http://keyserver.pgp.com and LDAP port 389 of the same
-server. The fingerprint for this key is:
+We recommend using :download:`this PGP/GPG key <./security-reporting.asc>` for
+encrypting the information. This key is also available at
+http://keyserver.pgp.com and LDAP port 389 of the same server.
+
+The fingerprint for this key is:
 
 ::
 
@@ -59,7 +61,7 @@ code.
 Attribution
 -----------
 
-We will name and thank you in the ``change-log.rst`` distributed with the source
+We will name and thank you in the :ref:`Change Log & Release Notes` distributed with the source
 code and in any published security advisory.
 
 Security Advisories
@@ -68,38 +70,43 @@ Security Advisories
 +-----------+------------------------------------------------------------------+
 | ID        | Title                                                            |
 +===========+==================================================================+
-| `TFV-1`_  | Malformed Firmware Update SMC can result in copy of unexpectedly |
+|  |TFV-1|  | Malformed Firmware Update SMC can result in copy of unexpectedly |
 |           | large data into secure memory                                    |
 +-----------+------------------------------------------------------------------+
-| `TFV-2`_  | Enabled secure self-hosted invasive debug interface can allow    |
+|  |TFV-2|  | Enabled secure self-hosted invasive debug interface can allow    |
 |           | normal world to panic secure world                               |
 +-----------+------------------------------------------------------------------+
-| `TFV-3`_  | RO memory is always executable at AArch64 Secure EL1             |
+|  |TFV-3|  | RO memory is always executable at AArch64 Secure EL1             |
 +-----------+------------------------------------------------------------------+
-| `TFV-4`_  | Malformed Firmware Update SMC can result in copy or              |
+|  |TFV-4|  | Malformed Firmware Update SMC can result in copy or              |
 |           | authentication of unexpected data in secure memory in AArch32    |
 |           | state                                                            |
 +-----------+------------------------------------------------------------------+
-| `TFV-5`_  | Not initializing or saving/restoring PMCR_EL0 can leak secure    |
+|  |TFV-5|  | Not initializing or saving/restoring PMCR_EL0 can leak secure    |
 |           | world timing information                                         |
 +-----------+------------------------------------------------------------------+
-| `TFV-6`_  | Trusted Firmware-A exposure to speculative processor             |
+|  |TFV-6|  | Trusted Firmware-A exposure to speculative processor             |
 |           | vulnerabilities using cache timing side-channels                 |
 +-----------+------------------------------------------------------------------+
-| `TFV-7`_  | Trusted Firmware-A exposure to cache speculation vulnerability   |
+|  |TFV-7|  | Trusted Firmware-A exposure to cache speculation vulnerability   |
 |           | Variant 4                                                        |
 +-----------+------------------------------------------------------------------+
-| `TFV-8`_  | Not saving x0 to x3 registers can leak information from one      |
+|  |TFV-8|  | Not saving x0 to x3 registers can leak information from one      |
 |           | Normal World SMC client to another                               |
 +-----------+------------------------------------------------------------------+
 
 .. _issue tracker: https://developer.trustedfirmware.org/project/board/1/
 .. _this PGP/GPG key: security-reporting.asc
-.. _TFV-1: ../security_advisories/security-advisory-tfv-1.rst
-.. _TFV-2: ../security_advisories/security-advisory-tfv-2.rst
-.. _TFV-3: ../security_advisories/security-advisory-tfv-3.rst
-.. _TFV-4: ../security_advisories/security-advisory-tfv-4.rst
-.. _TFV-5: ../security_advisories/security-advisory-tfv-5.rst
-.. _TFV-6: ../security_advisories/security-advisory-tfv-6.rst
-.. _TFV-7: ../security_advisories/security-advisory-tfv-7.rst
-.. _TFV-8: ../security_advisories/security-advisory-tfv-8.rst
+
+.. |TFV-1| replace:: :ref:`Advisory TFV-1 (CVE-2016-10319)`
+.. |TFV-2| replace:: :ref:`Advisory TFV-2 (CVE-2017-7564)`
+.. |TFV-3| replace:: :ref:`Advisory TFV-3 (CVE-2017-7563)`
+.. |TFV-4| replace:: :ref:`Advisory TFV-4 (CVE-2017-9607)`
+.. |TFV-5| replace:: :ref:`Advisory TFV-5 (CVE-2017-15031)`
+.. |TFV-6| replace:: :ref:`Advisory TFV-6 (CVE-2017-5753, CVE-2017-5715, CVE-2017-5754)`
+.. |TFV-7| replace:: :ref:`Advisory TFV-7 (CVE-2018-3639)`
+.. |TFV-8| replace:: :ref:`Advisory TFV-8 (CVE-2018-19440)`
+
+--------------
+
+*Copyright (c) 2019, Arm Limited. All rights reserved.*