From 23a27e51577ded4d070794b864585829c69cdc56 Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Tue, 28 Jun 2016 09:51:29 +0200 Subject: Apalis_TK1_K20: SPI Communication, ADC, TSC, GPIO Support for Communication between TK1 SoC and K20 MCU This patch includes ADC, TSC and GPIO functionality. Signed-off-by: Dominik Sliwa --- usb_1.1.0/host/class/usb_host_printer.h | 301 ++++++++++++++++++++++++++++++++ 1 file changed, 301 insertions(+) create mode 100644 usb_1.1.0/host/class/usb_host_printer.h (limited to 'usb_1.1.0/host/class/usb_host_printer.h') diff --git a/usb_1.1.0/host/class/usb_host_printer.h b/usb_1.1.0/host/class/usb_host_printer.h new file mode 100644 index 0000000..371ea80 --- /dev/null +++ b/usb_1.1.0/host/class/usb_host_printer.h @@ -0,0 +1,301 @@ +/* + * Copyright (c) 2016, Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __USB_HOST_PRINTER_H__ +#define __USB_HOST_PRINTER_H__ + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! + * @addtogroup usb_host_printer_drv + * @{ + */ + +/*! @brief Printer class code */ +#define USB_HOST_PRINTER_CLASS_CODE (7U) +/*! @brief Printer sub-class code */ +#define USB_HOST_PRINTER_SUBCLASS_CODE (1U) +/*! @brief Printer class protocol code (Unidirectional interface) */ +#define USB_HOST_PRINTER_PROTOCOL_UNIDIRECTION (1U) +/*! @brief Printer class protocol code (Bi-directional interface) */ +#define USB_HOST_PRINTER_PROTOCOL_BIDIRECTION (2U) +/*! @brief Printer class protocol code (IEEE® 1284.4 compatible bi-directional interface) */ +#define USB_HOST_PRINTER_PROTOCOL_IEEE1284 (3U) + +/*! @brief Printer class-specific request (GET_DEVICE_ID) */ +#define USB_HOST_PRINTER_GET_DEVICE_ID (0) +/*! @brief Printer class-specific request (GET_PORT_STATUS) */ +#define USB_HOST_PRINTER_GET_PORT_STATUS (1) +/*! @brief Printer class-specific request (SOFT_RESET) */ +#define USB_HOST_PRINTER_SOFT_RESET (2) + +/*! @brief Paper empty bit mask for GET_PORT_STATUS */ +#define USB_HOST_PRINTER_PORT_STATUS_PAPER_EMPTRY_MASK (0x20U) +/*! @brief Select bit mask for GET_PORT_STATUS */ +#define USB_HOST_PRINTER_PORT_STATUS_SELECT_MASK (0x10U) +/*! @brief Error bit mask for GET_PORT_STATUS */ +#define USB_HOST_PRINTER_PORT_STATUS_NOT_ERROR_MASK (0x08U) + +/*! @brief Printer instance structure and printer usb_host_class_handle pointer to this structure */ +typedef struct _usb_host_printer_instance +{ + usb_host_handle hostHandle; /*!< This instance's related host handle*/ + usb_device_handle deviceHandle; /*!< This instance's related device handle*/ + usb_host_interface_handle interfaceHandle; /*!< This instance's related interface handle*/ + usb_host_pipe_handle controlPipe; /*!< This instance's related device control pipe*/ + usb_host_pipe_handle inPipe; /*!< Printer bulk in pipe*/ + usb_host_pipe_handle outPipe; /*!< Printer bulk out pipe*/ + transfer_callback_t inCallbackFn; /*!< Printer bulk in transfer callback function pointer*/ + void *inCallbackParam; /*!< Printer bulk in transfer callback parameter*/ + transfer_callback_t outCallbackFn; /*!< Printer bulk out transfer callback function pointer*/ + void *outCallbackParam; /*!< Printer bulk out transfer callback parameter*/ + transfer_callback_t controlCallbackFn; /*!< Printer control transfer callback function pointer*/ + void *controlCallbackParam; /*!< Printer control transfer callback parameter*/ + usb_host_transfer_t *controlTransfer; /*!< Ongoing control transfer*/ +#if ((defined USB_HOST_CONFIG_CLASS_AUTO_CLEAR_STALL) && USB_HOST_CONFIG_CLASS_AUTO_CLEAR_STALL) + uint8_t *stallDataBuffer; + uint32_t stallDataLength; +#endif + + uint16_t inPacketSize; /*!< Printer bulk in maximum packet size*/ + uint16_t outPacketSize; /*!< Printer bulk out maximum packet size*/ +} usb_host_printer_instance_t; + +/******************************************************************************* + * API + ******************************************************************************/ + +#ifdef __cplusplus +extern "C" { +#endif + +/*! + * @name USB host printer class APIs + * @{ + */ + +/*! + * @brief Initializes the printer instance. + * + * This function allocate the resource for the printer instance. + * + * @param[in] deviceHandle The device handle. + * @param[out] classHandle Return class handle. + * + * @retval kStatus_USB_Success The device is initialized successfully. + * @retval kStatus_USB_AllocFail Allocate memory fail. + */ +extern usb_status_t USB_HostPrinterInit(usb_device_handle deviceHandle, usb_host_class_handle *classHandle); + +/*! + * @brief Sets the interface. + * + * This function binds the interface with the printer instance. + * + * @param[in] classHandle The class handle. + * @param[in] interfaceHandle The interface handle. + * @param[in] alternateSetting The alternate setting value. + * @param[in] callbackFn This callback is called after this function completes. + * @param[in] callbackParam The first parameter in the callback function. + * + * @retval kStatus_USB_Success The device is initialized successfully. + * @retval kStatus_USB_InvalidHandle The classHandle is NULL pointer. + * @retval kStatus_USB_Busy There is no idle transfer. + * @retval kStatus_USB_Error Send transfer fail. See the USB_HostSendSetup. + * @retval kStatus_USB_Busy Callback return status, there is no idle pipe. + * @retval kStatus_USB_TransferStall Callback return status, the transfer is stalled by the device. + * @retval kStatus_USB_Error Callback return status, open pipe fail. See the USB_HostOpenPipe. + */ +extern usb_status_t USB_HostPrinterSetInterface(usb_host_class_handle classHandle, + usb_host_interface_handle interfaceHandle, + uint8_t alternateSetting, + transfer_callback_t callbackFn, + void *callbackParam); + +/*! + * @brief De-initializes the the printer instance. + * + * This function frees the resources for the printer instance. + * + * @param[in] deviceHandle The device handle. + * @param[in] classHandle The class handle. + * + * @retval kStatus_USB_Success The device is de-initialized successfully. + */ +extern usb_status_t USB_HostPrinterDeinit(usb_device_handle deviceHandle, usb_host_class_handle classHandle); + +/*! + * @brief Gets the pipe maximum packet size. + * + * @param[in] classHandle The class handle. + * @param[in] pipeType Its value is USB_ENDPOINT_CONTROL, USB_ENDPOINT_ISOCHRONOUS, USB_ENDPOINT_BULK or + * USB_ENDPOINT_INTERRUPT. + * See the usb_spec.h + * @param[in] direction Pipe direction. + * + * @retval 0 The classHandle is NULL. + * @retval Maximum Packet size. + */ +extern uint16_t USB_HostPrinterGetPacketsize(usb_host_class_handle classHandle, uint8_t pipeType, uint8_t direction); + +/*! + * @brief Receives data. + * + * This function implements the printer receiving data. + * + * @param[in] classHandle The class handle. + * @param[out] buffer The buffer pointer. + * @param[in] bufferLength The buffer length. + * @param[in] callbackFn This callback is called after this function completes. + * @param[in] callbackParam The first parameter in the callback function. + * + * @retval kStatus_USB_Success Receive request successfully. + * @retval kStatus_USB_InvalidHandle The classHandle is NULL pointer. + * @retval kStatus_USB_Busy There is no idle transfer. + * @retval kStatus_USB_Error Pipe is not initialized. + * Or, send transfer fail. See the USB_HostRecv. + */ +extern usb_status_t USB_HostPrinterRecv(usb_host_class_handle classHandle, + uint8_t *buffer, + uint32_t bufferLength, + transfer_callback_t callbackFn, + void *callbackParam); + +/*! + * @brief Sends data. + * + * This function implements the printer sending data. + * + * @param[in] classHandle The class handle. + * @param[in] buffer The buffer pointer. + * @param[in] bufferLength The buffer length. + * @param[in] callbackFn This callback is called after this function completes. + * @param[in] callbackParam The first parameter in the callback function. + * + * @retval kStatus_USB_Success Send request successfully. + * @retval kStatus_USB_InvalidHandle The classHandle is NULL pointer. + * @retval kStatus_USB_Busy There is no idle transfer. + * @retval kStatus_USB_Error Pipe is not initialized. + * Or, send transfer fail. See the USB_HostSend. + */ +extern usb_status_t USB_HostPrinterSend(usb_host_class_handle classHandle, + uint8_t *buffer, + uint32_t bufferLength, + transfer_callback_t callbackFn, + void *callbackParam); + +/*! + * @brief Gets the pipe maximum packet size. + * + * @param[in] classHandle The class handle. + * @param[in] pipeType Its value is USB_ENDPOINT_CONTROL, USB_ENDPOINT_ISOCHRONOUS, USB_ENDPOINT_BULK or + * USB_ENDPOINT_INTERRUPT. See the usb_spec.h + * @param[in] direction Pipe direction. + * + * @retval 0 The classHandle is NULL. + * @retval Maximum Packet size. + */ +extern uint16_t USB_HostPrinterGetPacketsize(usb_host_class_handle classHandle, uint8_t pipeType, uint8_t direction); + +/*! + * @brief Printer get device ID. + * + * This function implements the printer class-specific request (GET_DEVICE_ID). + * + * @param[in] classHandle The class handle. + * @param[in] interfaceIndex Interface index. + * @param[in] alternateSetting Get the alternateSetting's device ID. + * @param[out] buffer The buffer pointer. + * @param[in] length The buffer length. + * @param[in] callbackFn This callback is called after this function completes. + * @param[in] callbackParam The first parameter in the callback function. + * + * @retval kStatus_USB_Success Request successful. + * @retval kStatus_USB_InvalidHandle The classHandle is NULL pointer. + * @retval kStatus_USB_Busy There is no idle transfer. + * @retval kStatus_USB_Error Send transfer fail. See the USB_HostSendSetup. + */ +extern usb_status_t USB_HostPrinterGetDeviceId(usb_host_class_handle classHandle, + uint8_t interfaceIndex, + uint8_t alternateSetting, + uint8_t *buffer, + uint32_t length, + transfer_callback_t callbackFn, + void *callbackParam); + +/*! + * @brief Printer get port status. + * + * This function implements the printer class-specific request (GET_PORT_STATUS). + * + * @param[in] classHandle The class handle. + * @param[in] portStatus Port status buffer. + * @param[in] callbackFn This callback is called after this function completes. + * @param[in] callbackParam The first parameter in the callback function. + * + * @retval kStatus_USB_Success Request successful. + * @retval kStatus_USB_InvalidHandle The classHandle is NULL pointer. + * @retval kStatus_USB_Busy There is no idle transfer. + * @retval kStatus_USB_Error Send transfer fail. See the USB_HostSendSetup. + */ +extern usb_status_t USB_HostPrinterGetPortStatus(usb_host_class_handle classHandle, + uint8_t *portStatus, + transfer_callback_t callbackFn, + void *callbackParam); + +/*! + * @brief Printer soft reset. + * + * This function implements the printer class-specific request (SOFT_RESET). + * + * @param[in] classHandle The class handle. + * @param[in] portStatus Port status buffer. + * @param[in] callbackFn This callback is called after this function completes. + * @param[in] callbackParam The first parameter in the callback function. + * + * @retval kStatus_USB_Success Request successful. + * @retval kStatus_USB_InvalidHandle The classHandle is NULL pointer. + * @retval kStatus_USB_Busy There is no idle transfer. + * @retval kStatus_USB_Error Send transfer fail. See the USB_HostSendSetup. + */ +extern usb_status_t USB_HostPrinterSoftReset(usb_host_class_handle classHandle, + transfer_callback_t callbackFn, + void *callbackParam); +/*! @}*/ + +#ifdef __cplusplus +} +#endif + +/*! @}*/ + +#endif /* __USB_HOST_PRINTER_H__ */ -- cgit v1.2.3