From f7cd9b461ca33845339f4a11f49bdc142696827a Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Tue, 28 Jun 2016 09:51:29 +0200 Subject: Apalis_TK1_K20: SPI Communication, ADC, TSC, GPIO Support for Communication between TK1 SoC and K20 MCU This patch includes ADC, TSC and GPIO functionality. Signed-off-by: Dominik Sliwa --- usb_1.1.0/device/usb_device.h | 508 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 508 insertions(+) create mode 100644 usb_1.1.0/device/usb_device.h (limited to 'usb_1.1.0/device/usb_device.h') diff --git a/usb_1.1.0/device/usb_device.h b/usb_1.1.0/device/usb_device.h new file mode 100644 index 0000000..6301c97 --- /dev/null +++ b/usb_1.1.0/device/usb_device.h @@ -0,0 +1,508 @@ +/* + * Copyright (c) 2015 - 2016, Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __USB_DEVICE_H__ +#define __USB_DEVICE_H__ + +/*! + * @addtogroup usb_device_driver + * @{ + */ + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @brief Defines Get/Set status Types */ +typedef enum _usb_device_status +{ + kUSB_DeviceStatusTestMode = 1U, /*!< Test mode */ + kUSB_DeviceStatusSpeed, /*!< Current speed */ + kUSB_DeviceStatusOtg, /*!< OTG status */ + kUSB_DeviceStatusDevice, /*!< Device status */ + kUSB_DeviceStatusEndpoint, /*!< Endpoint state usb_device_endpoint_status_t */ + kUSB_DeviceStatusDeviceState, /*!< Device state */ + kUSB_DeviceStatusAddress, /*!< Device address */ + kUSB_DeviceStatusSynchFrame, /*!< Current frame */ + kUSB_DeviceStatusBus, /*!< Bus status */ +} usb_device_status_t; + +/*! @brief Defines USB 2.0 device state */ +typedef enum _usb_device_state +{ + kUSB_DeviceStateConfigured = 0U, /*!< Device state, Configured*/ + kUSB_DeviceStateAddress, /*!< Device state, Address*/ + kUSB_DeviceStateDefault, /*!< Device state, Default*/ + kUSB_DeviceStateAddressing, /*!< Device state, Address setting*/ + kUSB_DeviceStateTestMode, /*!< Device state, Test mode*/ +} usb_device_state_t; + +/*! @brief Defines endpoint state */ +typedef enum _usb_endpoint_status +{ + kUSB_DeviceEndpointStateIdle = 0U, /*!< Endpoint state, idle*/ + kUSB_DeviceEndpointStateStalled, /*!< Endpoint state, stalled*/ +} usb_device_endpoint_status_t; + +/*! @brief Control endpoint index */ +#define USB_CONTROL_ENDPOINT (0U) +/*! @brief Control endpoint maxPacketSize */ +#define USB_CONTROL_MAX_PACKET_SIZE (64U) + +#if (USB_DEVICE_CONFIG_EHCI && (USB_CONTROL_MAX_PACKET_SIZE != (64U))) +#error For high speed, USB_CONTROL_MAX_PACKET_SIZE must be 64!!! +#endif + +/*! @brief The setup packet size of USB control transfer. */ +#define USB_SETUP_PACKET_SIZE (8U) +/*! @brief USB endpoint mask */ +#define USB_ENDPOINT_NUMBER_MASK (0x0FU) + +/*! @brief Default invalid value or the endpoint callback length of cancelled transfer */ +#define USB_UNINITIALIZED_VAL_32 (0xFFFFFFFFU) + +/*! @brief Available common EVENT types in device callback */ +typedef enum _usb_device_event +{ + kUSB_DeviceEventBusReset = 1U, /*!< USB bus reset signal detected */ + kUSB_DeviceEventSuspend, /*!< USB bus suspend signal detected */ + kUSB_DeviceEventResume, /*!< USB bus resume signal detected. The resume signal is driven by itself or a host */ + kUSB_DeviceEventError, /*!< An error is happened in the bus. */ + kUSB_DeviceEventDetach, /*!< USB device is disconnected from a host. */ + kUSB_DeviceEventAttach, /*!< USB device is connected to a host. */ + kUSB_DeviceEventSetConfiguration, /*!< Set configuration. */ + kUSB_DeviceEventSetInterface, /*!< Set interface. */ + + kUSB_DeviceEventGetDeviceDescriptor, /*!< Get device descriptor. */ + kUSB_DeviceEventGetConfigurationDescriptor, /*!< Get configuration descriptor. */ + kUSB_DeviceEventGetStringDescriptor, /*!< Get string descriptor. */ + kUSB_DeviceEventGetHidDescriptor, /*!< Get HID descriptor. */ + kUSB_DeviceEventGetHidReportDescriptor, /*!< Get HID report descriptor. */ + kUSB_DeviceEventGetHidPhysicalDescriptor, /*!< Get HID physical descriptor. */ + kUSB_DeviceEventGetDeviceQualifierDescriptor, /*!< Get device qualifier descriptor. */ + kUSB_DeviceEventVendorRequest, /*!< Vendor request. */ + kUSB_DeviceEventSetRemoteWakeup, /*!< Enable or disable remote wakeup function. */ + kUSB_DeviceEventGetConfiguration, /*!< Get current configuration index */ + kUSB_DeviceEventGetInterface, /*!< Get current interface alternate setting value */ +} usb_device_event_t; + +/*! @brief Endpoint callback message structure */ +typedef struct _usb_device_endpoint_callback_message_struct +{ + uint8_t *buffer; /*!< Transferred buffer */ + uint32_t length; /*!< Transferred data length */ + uint8_t isSetup; /*!< Is in a setup phase */ +} usb_device_endpoint_callback_message_struct_t; + +/*! + * @brief Endpoint callback function typedef. + * + * This callback function is used to notify the upper layer what the transfer result is. + * This callback pointer is passed when a specified endpoint is initialized by calling API #USB_DeviceInitEndpoint. + * + * @param handle The device handle. It equals to the value returned from #USB_DeviceInit. + * @param message The result of a transfer, which includes transfer buffer, transfer length, and whether is in a + * setup phase. + * phase for control pipe. + * @param callbackParam The parameter for this callback. It is same with + * usb_device_endpoint_callback_struct_t::callbackParam. + * + * @return A USB error code or kStatus_USB_Success. + */ +typedef usb_status_t (*usb_device_endpoint_callback_t)(usb_device_handle handle, + usb_device_endpoint_callback_message_struct_t *message, + void *callbackParam); + +/*! + * @brief Device callback function typedef. + * + * This callback function is used to notify the upper layer that the device status has changed. + * This callback pointer is passed by calling API #USB_DeviceInit. + * + * @param handle The device handle. It equals the value returned from #USB_DeviceInit. + * @param callbackEvent The callback event type. See enumeration #usb_device_event_t. + * @param eventParam The event parameter for this callback. The parameter type is determined by the callback event. + * + * @return A USB error code or kStatus_USB_Success. + */ +typedef usb_status_t (*usb_device_callback_t)(usb_device_handle handle, uint32_t callbackEvent, void *eventParam); + +/*! @brief Endpoint callback structure */ +typedef struct _usb_device_endpoint_callback_struct +{ + usb_device_endpoint_callback_t callbackFn; /*!< Endpoint callback function*/ + void *callbackParam; /*!< Parameter for callback function*/ +} usb_device_endpoint_callback_struct_t; + +/*! @brief Endpoint initialization structure */ +typedef struct _usb_device_endpoint_init_struct +{ + uint16_t maxPacketSize; /*!< Endpoint maximum packet size */ + uint8_t endpointAddress; /*!< Endpoint address*/ + uint8_t transferType; /*!< Endpoint transfer type*/ + uint8_t zlt; /*!< ZLT flag*/ +} usb_device_endpoint_init_struct_t; + +/*! @brief Endpoint status structure */ +typedef struct _usb_device_endpoint_status_struct +{ + uint8_t endpointAddress; /*!< Endpoint address */ + uint16_t endpointStatus; /*!< Endpoint status : idle or stalled */ +} usb_device_endpoint_status_struct_t; + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @name USB device APIs + * @{ + */ + +/******************************************************************************* + * API + ******************************************************************************/ + +/*! + * @brief Initializes the USB device stack. + * + * This function initializes the USB device module specified by the controllerId. + * + * @param[in] controllerId The controller ID of the USB IP. See the enumeration #usb_controller_index_t. + * @param[in] deviceCallback Function pointer of the device callback. + * @param[out] handle It is an out parameter used to return the pointer of the device handle to the caller. + * + * @retval kStatus_USB_Success The device is initialized successfully. + * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. + * @retval kStatus_USB_Busy Cannot allocate a device handle. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller according to the controller id. + * @retval kStatus_USB_InvalidControllerInterface The controller driver interfaces is invalid. There is an empty + * interface entity. + * @retval kStatus_USB_Error The macro USB_DEVICE_CONFIG_ENDPOINTS is more than the IP's endpoint number. + * Or, the device has been initialized. + * Or, the mutex or message queue is created failed. + */ +extern usb_status_t USB_DeviceInit(uint8_t controllerId, + usb_device_callback_t deviceCallback, + usb_device_handle *handle); + +/*! + * @brief Enables the device functionality. + * + * The function enables the device functionality, so that the device can be recognized by the host when the device + * detects that it has been connected to a host. + * + * @param[in] handle The device handle got from #USB_DeviceInit. + * + * @retval kStatus_USB_Success The device is run successfully. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller. + * @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer. Or the controller handle is invalid. + * + */ +extern usb_status_t USB_DeviceRun(usb_device_handle handle); + +/*! + * @brief Disables the device functionality. + * + * The function disables the device functionality. After this function called, even if the device is detached to the + * host, + * it can't work. + * + * @param[in] handle The device handle received from #USB_DeviceInit. + * + * @retval kStatus_USB_Success The device is stopped successfully. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller. + * @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer or the controller handle is invalid. + */ +extern usb_status_t USB_DeviceStop(usb_device_handle handle); + +/*! + * @brief De-initializes the device controller. + * + * The function de-initializes the device controller specified by the handle. + * + * @param[in] handle The device handle got from #USB_DeviceInit. + * + * @retval kStatus_USB_Success The device is stopped successfully. + * @retval kStatus_USB_InvalidHandle The device handle is a NULL pointer or the controller handle is invalid. + */ +extern usb_status_t USB_DeviceDeinit(usb_device_handle handle); + +/*! + * @brief Sends data through a specified endpoint. + * + * The function is used to send data through a specified endpoint. + * + * @param[in] handle The device handle got from #USB_DeviceInit. + * @param[in] endpointAddress Endpoint index. + * @param[in] buffer The memory address to hold the data need to be sent. + * @param[in] length The data length need to be sent. + * + * @retval kStatus_USB_Success The send request is sent successfully. + * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. + * @retval kStatus_USB_Busy Cannot allocate DTDS for current transfer in EHCI driver. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller. + * @retval kStatus_USB_Error The device is doing reset. + * + * @note The return value indicates whether the sending request is successful or not. The transfer done is notified by + * the + * corresponding callback function. + * Currently, only one transfer request can be supported for one specific endpoint. + * If there is a specific requirement to support multiple transfer requests for one specific endpoint, the application + * should implement a queue on the application level. + * The subsequent transfer can begin only when the previous transfer is done (get notification through the endpoint + * callback). + */ +extern usb_status_t USB_DeviceSendRequest(usb_device_handle handle, + uint8_t endpointAddress, + uint8_t *buffer, + uint32_t length); + +/*! + * @brief Receives data through a specified endpoint. + * + * The function is used to receive data through a specified endpoint. + * + * @param[in] handle The device handle got from #USB_DeviceInit. + * @param[in] endpointAddress Endpoint index. + * @param[in] buffer The memory address to save the received data. + * @param[in] length The data length want to be received. + * + * @retval kStatus_USB_Success The receive request is sent successfully. + * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. + * @retval kStatus_USB_Busy Cannot allocate DTDS for current transfer in EHCI driver. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller. + * @retval kStatus_USB_Error The device is doing reset. + * + * @note The return value indicates whether the receiving request is successful or not. The transfer done is notified by + * the + * corresponding callback function. + * Currently, only one transfer request can be supported for one specific endpoint. + * If there is a specific requirement to support multiple transfer requests for one specific endpoint, the application + * should implement a queue on the application level. + * The subsequent transfer can begin only when the previous transfer is done (get notification through the endpoint + * callback). + */ +extern usb_status_t USB_DeviceRecvRequest(usb_device_handle handle, + uint8_t endpointAddress, + uint8_t *buffer, + uint32_t length); + +/*! + * @brief Cancels the pending transfer in a specified endpoint. + * + * The function is used to cancel the pending transfer in a specified endpoint. + * + * @param[in] handle The device handle got from #USB_DeviceInit. + * @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT. + * + * @retval kStatus_USB_Success The transfer is cancelled. + * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer or the controller handle is invalid. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller. + */ +extern usb_status_t USB_DeviceCancel(usb_device_handle handle, uint8_t endpointAddress); + +/*! + * @brief Initializes a specified endpoint. + * + * The function is used to initialize a specified endpoint. The corresponding endpoint callback is also initialized. + * + * @param[in] handle The device handle received from #USB_DeviceInit. + * @param[in] epInit Endpoint initialization structure. See the structure usb_device_endpoint_init_struct_t. + * @param[in] endpointCallback Endpoint callback structure. See the structure + * usb_device_endpoint_callback_struct_t. + * + * @retval kStatus_USB_Success The endpoint is initialized successfully. + * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. + * @retval kStatus_USB_InvalidParameter The epInit or endpointCallback is NULL pointer. Or the endpoint number is + * more than USB_DEVICE_CONFIG_ENDPOINTS. + * @retval kStatus_USB_Busy The endpoint is busy in EHCI driver. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller. + */ +extern usb_status_t USB_DeviceInitEndpoint(usb_device_handle handle, + usb_device_endpoint_init_struct_t *epInit, + usb_device_endpoint_callback_struct_t *endpointCallback); + +/*! + * @brief Deinitializes a specified endpoint. + * + * The function is used to deinitializes a specified endpoint. + * + * @param[in] handle The device handle got from #USB_DeviceInit. + * @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT. + * + * @retval kStatus_USB_Success The endpoint is de-initialized successfully. + * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. + * @retval kStatus_USB_InvalidParameter The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS. + * @retval kStatus_USB_Busy The endpoint is busy in EHCI driver. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller. + */ +extern usb_status_t USB_DeviceDeinitEndpoint(usb_device_handle handle, uint8_t endpointAddress); + +/*! + * @brief Stalls a specified endpoint. + * + * The function is used to stall a specified endpoint. + * + * @param[in] handle The device handle received from #USB_DeviceInit. + * @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT. + * + * @retval kStatus_USB_Success The endpoint is stalled successfully. + * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. + * @retval kStatus_USB_InvalidParameter The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller. + */ +extern usb_status_t USB_DeviceStallEndpoint(usb_device_handle handle, uint8_t endpointAddress); + +/*! + * @brief Unstalls a specified endpoint. + * + * The function is used to unstall a specified endpoint. + * + * @param[in] handle The device handle received from #USB_DeviceInit. + * @param[in] endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, and 0U - OUT. + * + * @retval kStatus_USB_Success The endpoint is unstalled successfully. + * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. + * @retval kStatus_USB_InvalidParameter The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller. + */ +extern usb_status_t USB_DeviceUnstallEndpoint(usb_device_handle handle, uint8_t endpointAddress); + +/*! + * @brief Gets the status of the selected item. + * + * The function is used to get the status of the selected item. + * + * @param[in] handle The device handle got from #USB_DeviceInit. + * @param[in] type The selected item. See the structure #usb_device_status_t. + * @param[out] param The parameter type is determined by the selected item. + * + * @retval kStatus_USB_Success Get status successfully. + * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. + * @retval kStatus_USB_InvalidParameter The parameter is NULL pointer. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller. + * @retval kStatus_USB_Error Unsupported type. + */ +extern usb_status_t USB_DeviceGetStatus(usb_device_handle handle, usb_device_status_t type, void *param); + +/*! + * @brief Sets the status of the selected item. + * + * The function is used to set the status of the selected item. + * + * @param[in] handle The device handle got from #USB_DeviceInit. + * @param[in] type The selected item. See the structure #usb_device_status_t. + * @param[in] param The parameter type is determined by the selected item. + * + * @retval kStatus_USB_Success Set status successfully. + * @retval kStatus_USB_InvalidHandle The handle is a NULL pointer. Or the controller handle is invalid. + * @retval kStatus_USB_ControllerNotFound Cannot find the controller. + * @retval kStatus_USB_Error Unsupported type or the parameter is NULL pointer. + */ +extern usb_status_t USB_DeviceSetStatus(usb_device_handle handle, usb_device_status_t type, void *param); + +/*! + * @brief Device task function. + * + * The function is used to handle the controller message. + * This function should not be called in the application directly. + * + * @param[in] deviceHandle The device handle got from #USB_DeviceInit. + */ +extern void USB_DeviceTaskFunction(void *deviceHandle); + +#if ((defined(USB_DEVICE_CONFIG_KHCI)) && (USB_DEVICE_CONFIG_KHCI > 0U)) +/*! + * @brief Device KHCI task function. + * + * The function is used to handle the KHCI controller message. + * In the bare metal environment, this function should be called periodically in the main function. + * In the RTOS environment, this function should be used as a function entry to create a task. + * + * @param[in] deviceHandle The device handle got from #USB_DeviceInit. + */ +#define USB_DeviceKhciTaskFunction(deviceHandle) USB_DeviceTaskFunction(deviceHandle) +#endif + +#if ((defined(USB_DEVICE_CONFIG_EHCI)) && (USB_DEVICE_CONFIG_EHCI > 0U)) +/*! + * @brief Device EHCI task function. + * + * The function is used to handle the EHCI controller message. + * In the bare metal environment, this function should be called periodically in the main function. + * In the RTOS environment, this function should be used as a function entry to create a task. + * + * @param[in] deviceHandle The device handle got from #USB_DeviceInit. + */ +#define USB_DeviceEhciTaskFunction(deviceHandle) USB_DeviceTaskFunction(deviceHandle) +#endif + +#if ((defined(USB_DEVICE_CONFIG_KHCI)) && (USB_DEVICE_CONFIG_KHCI > 0U)) +/*! + * @brief Device KHCI ISR function. + * + * The function is the KHCI interrupt service routine. + * + * @param[in] deviceHandle The device handle got from #USB_DeviceInit. + */ +extern void USB_DeviceKhciIsrFunction(void *deviceHandle); +#endif + +#if ((defined(USB_DEVICE_CONFIG_EHCI)) && (USB_DEVICE_CONFIG_EHCI > 0U)) +/*! + * @brief Device EHCI ISR function. + * + * The function is the EHCI interrupt service routine. + * + * @param[in] deviceHandle The device handle got from #USB_DeviceInit. + */ +extern void USB_DeviceEhciIsrFunction(void *deviceHandle); +#endif + +/*! + * @brief Gets the device stack version function. + * + * The function is used to get the device stack version. + * + * @param[out] version The version structure pointer to keep the device stack version. + * + */ +extern void USB_DeviceGetVersion(uint32_t *version); + +/*! @}*/ + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/*! @}*/ + +#endif /* __USB_DEVICE_H__ */ -- cgit v1.2.3