From 44f7d1e90427b2e2cdd69cd9a9cc094a02c5ea56 Mon Sep 17 00:00:00 2001 From: Dominik Sliwa Date: Mon, 27 Jun 2016 13:46:01 +0200 Subject: k20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commitk20_tester: Initial commit --- drivers/fsl_smc.h | 418 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 418 insertions(+) create mode 100644 drivers/fsl_smc.h (limited to 'drivers/fsl_smc.h') diff --git a/drivers/fsl_smc.h b/drivers/fsl_smc.h new file mode 100644 index 0000000..4148734 --- /dev/null +++ b/drivers/fsl_smc.h @@ -0,0 +1,418 @@ +/* + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _FSL_SMC_H_ +#define _FSL_SMC_H_ + +#include "fsl_common.h" + +/*! @addtogroup smc */ +/*! @{ */ + + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +/*! @brief SMC driver version 2.0.2. */ +#define FSL_SMC_DRIVER_VERSION (MAKE_VERSION(2, 0, 2)) +/*@}*/ + +/*! + * @brief Power Modes Protection + */ +typedef enum _smc_power_mode_protection +{ +#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) + kSMC_AllowPowerModeVlls = SMC_PMPROT_AVLLS_MASK, /*!< Allow Very-Low-Leakage Stop Mode. */ +#endif +#if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) + kSMC_AllowPowerModeLls = SMC_PMPROT_ALLS_MASK, /*!< Allow Low-Leakage Stop Mode. */ +#endif /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */ + kSMC_AllowPowerModeVlp = SMC_PMPROT_AVLP_MASK, /*!< Allow Very-Low-Power Mode. */ +#if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) + kSMC_AllowPowerModeHsrun = SMC_PMPROT_AHSRUN_MASK, /*!< Allow High Speed Run mode. */ +#endif /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */ + kSMC_AllowPowerModeAll = (0U +#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) + | + SMC_PMPROT_AVLLS_MASK +#endif +#if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) + | + SMC_PMPROT_ALLS_MASK +#endif /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */ + | + SMC_PMPROT_AVLP_MASK +#if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) + | + kSMC_AllowPowerModeHsrun +#endif /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */ + ) /*!< Allow all power mode. */ +} smc_power_mode_protection_t; + +/*! + * @brief Power Modes in PMSTAT + */ +typedef enum _smc_power_state +{ + kSMC_PowerStateRun = 0x01U << 0U, /*!< 0000_0001 - Current power mode is RUN */ + kSMC_PowerStateStop = 0x01U << 1U, /*!< 0000_0010 - Current power mode is STOP */ + kSMC_PowerStateVlpr = 0x01U << 2U, /*!< 0000_0100 - Current power mode is VLPR */ + kSMC_PowerStateVlpw = 0x01U << 3U, /*!< 0000_1000 - Current power mode is VLPW */ + kSMC_PowerStateVlps = 0x01U << 4U, /*!< 0001_0000 - Current power mode is VLPS */ +#if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) + kSMC_PowerStateLls = 0x01U << 5U, /*!< 0010_0000 - Current power mode is LLS */ +#endif /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */ +#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) + kSMC_PowerStateVlls = 0x01U << 6U, /*!< 0100_0000 - Current power mode is VLLS */ +#endif +#if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) + kSMC_PowerStateHsrun = 0x01U << 7U /*!< 1000_0000 - Current power mode is HSRUN */ +#endif /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */ +} smc_power_state_t; + +/*! + * @brief Run mode definition + */ +typedef enum _smc_run_mode +{ + kSMC_RunNormal = 0U, /*!< normal RUN mode. */ + kSMC_RunVlpr = 2U, /*!< Very-Low-Power RUN mode. */ +#if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) + kSMC_Hsrun = 3U /*!< High Speed Run mode (HSRUN). */ +#endif /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */ +} smc_run_mode_t; + +/*! + * @brief Stop mode definition + */ +typedef enum _smc_stop_mode +{ + kSMC_StopNormal = 0U, /*!< Normal STOP mode. */ + kSMC_StopVlps = 2U, /*!< Very-Low-Power STOP mode. */ +#if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) + kSMC_StopLls = 3U, /*!< Low-Leakage Stop mode. */ +#endif /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */ +#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) + kSMC_StopVlls = 4U /*!< Very-Low-Leakage Stop mode. */ +#endif +} smc_stop_mode_t; + +#if (defined(FSL_FEATURE_SMC_USE_VLLSCTRL_REG) && FSL_FEATURE_SMC_USE_VLLSCTRL_REG) || \ + (defined(FSL_FEATURE_SMC_USE_STOPCTRL_VLLSM) && FSL_FEATURE_SMC_USE_STOPCTRL_VLLSM) || \ + (defined(FSL_FEATURE_SMC_HAS_LLS_SUBMODE) && FSL_FEATURE_SMC_HAS_LLS_SUBMODE) +/*! + * @brief VLLS/LLS stop sub mode definition + */ +typedef enum _smc_stop_submode +{ + kSMC_StopSub0 = 0U, /*!< Stop submode 0, for VLLS0/LLS0. */ + kSMC_StopSub1 = 1U, /*!< Stop submode 1, for VLLS1/LLS1. */ + kSMC_StopSub2 = 2U, /*!< Stop submode 2, for VLLS2/LLS2. */ + kSMC_StopSub3 = 3U /*!< Stop submode 3, for VLLS3/LLS3. */ +} smc_stop_submode_t; +#endif + +/*! + * @brief Partial STOP option + */ +typedef enum _smc_partial_stop_mode +{ + kSMC_PartialStop = 0U, /*!< STOP - Normal Stop mode*/ + kSMC_PartialStop1 = 1U, /*!< Partial Stop with both system and bus clocks disabled*/ + kSMC_PartialStop2 = 2U, /*!< Partial Stop with system clock disabled and bus clock enabled*/ +} smc_partial_stop_option_t; + +/*! + * @brief SMC configuration status + */ +enum _smc_status +{ + kStatus_SMC_StopAbort = MAKE_STATUS(kStatusGroup_POWER, 0) /*!< Entering Stop mode is abort*/ +}; + +#if (defined(FSL_FEATURE_SMC_HAS_VERID) && FSL_FEATURE_SMC_HAS_VERID) +/*! + * @brief IP version ID definition. + */ +typedef struct _smc_version_id +{ + uint16_t feature; /*!< Feature Specification Number. */ + uint8_t minor; /*!< Minor version number. */ + uint8_t major; /*!< Major version number. */ +} smc_version_id_t; +#endif /* FSL_FEATURE_SMC_HAS_VERID */ + +#if (defined(FSL_FEATURE_SMC_HAS_PARAM) && FSL_FEATURE_SMC_HAS_PARAM) +/*! + * @brief IP parameter definition. + */ +typedef struct _smc_param +{ + bool hsrunEnable; /*!< HSRUN mode enable. */ + bool llsEnable; /*!< LLS mode enable. */ + bool lls2Enable; /*!< LLS2 mode enable. */ + bool vlls0Enable; /*!< VLLS0 mode enable. */ +} smc_param_t; +#endif /* FSL_FEATURE_SMC_HAS_PARAM */ + +#if (defined(FSL_FEATURE_SMC_HAS_LLS_SUBMODE) && FSL_FEATURE_SMC_HAS_LLS_SUBMODE) || \ + (defined(FSL_FEATURE_SMC_HAS_LPOPO) && FSL_FEATURE_SMC_HAS_LPOPO) +/*! + * @brief SMC Low-Leakage Stop power mode config + */ +typedef struct _smc_power_mode_lls_config +{ +#if (defined(FSL_FEATURE_SMC_HAS_LLS_SUBMODE) && FSL_FEATURE_SMC_HAS_LLS_SUBMODE) + smc_stop_submode_t subMode; /*!< Low-leakage Stop sub-mode */ +#endif +#if (defined(FSL_FEATURE_SMC_HAS_LPOPO) && FSL_FEATURE_SMC_HAS_LPOPO) + bool enableLpoClock; /*!< Enable LPO clock in LLS mode */ +#endif +} smc_power_mode_lls_config_t; +#endif /* (FSL_FEATURE_SMC_HAS_LLS_SUBMODE || FSL_FEATURE_SMC_HAS_LPOPO) */ + +#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) +/*! + * @brief SMC Very Low-Leakage Stop power mode config + */ +typedef struct _smc_power_mode_vlls_config +{ +#if (defined(FSL_FEATURE_SMC_USE_VLLSCTRL_REG) && FSL_FEATURE_SMC_USE_VLLSCTRL_REG) || \ + (defined(FSL_FEATURE_SMC_USE_STOPCTRL_VLLSM) && FSL_FEATURE_SMC_USE_STOPCTRL_VLLSM) || \ + (defined(FSL_FEATURE_SMC_HAS_LLS_SUBMODE) && FSL_FEATURE_SMC_HAS_LLS_SUBMODE) + smc_stop_submode_t subMode; /*!< Very Low-leakage Stop sub-mode */ +#endif +#if (defined(FSL_FEATURE_SMC_HAS_PORPO) && FSL_FEATURE_SMC_HAS_PORPO) + bool enablePorDetectInVlls0; /*!< Enable Power on reset detect in VLLS mode */ +#endif +#if (defined(FSL_FEATURE_SMC_HAS_RAM2_POWER_OPTION) && FSL_FEATURE_SMC_HAS_RAM2_POWER_OPTION) + bool enableRam2InVlls2; /*!< Enable RAM2 power in VLLS2 */ +#endif +#if (defined(FSL_FEATURE_SMC_HAS_LPOPO) && FSL_FEATURE_SMC_HAS_LPOPO) + bool enableLpoClock; /*!< Enable LPO clock in VLLS mode */ +#endif +} smc_power_mode_vlls_config_t; +#endif + +/******************************************************************************* + * API + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus */ + +/*! @name System mode controller APIs*/ +/*@{*/ + +#if (defined(FSL_FEATURE_SMC_HAS_VERID) && FSL_FEATURE_SMC_HAS_VERID) +/*! + * @brief Gets the SMC version ID. + * + * This function gets the SMC version ID, including major version number, + * minor version number and feature specification number. + * + * @param base SMC peripheral base address. + * @param versionId Pointer to version ID structure. + */ +static inline void SMC_GetVersionId(SMC_Type *base, smc_version_id_t *versionId) +{ + *((uint32_t *)versionId) = base->VERID; +} +#endif /* FSL_FEATURE_SMC_HAS_VERID */ + +#if (defined(FSL_FEATURE_SMC_HAS_PARAM) && FSL_FEATURE_SMC_HAS_PARAM) +/*! + * @brief Gets the SMC parameter. + * + * This function gets the SMC parameter, including the enabled power mdoes. + * + * @param base SMC peripheral base address. + * @param param Pointer to SMC param structure. + */ +void SMC_GetParam(SMC_Type *base, smc_param_t *param); +#endif + +/*! + * @brief Configures all power mode protection settings. + * + * This function configures the power mode protection settings for + * supported power modes in the specified chip family. The available power modes + * are defined in the smc_power_mode_protection_t. This should be done at an early + * system level initialization stage. See the reference manual for details. + * This register can only write once after the power reset. + * + * The allowed modes are passed as bit map, for example, to allow LLS and VLLS, + * use SMC_SetPowerModeProtection(kSMC_AllowPowerModeVlls | kSMC_AllowPowerModeVlps). + * To allow all modes, use SMC_SetPowerModeProtection(kSMC_AllowPowerModeAll). + * + * @param base SMC peripheral base address. + * @param allowedModes Bitmap of the allowed power modes. + */ +static inline void SMC_SetPowerModeProtection(SMC_Type *base, uint8_t allowedModes) +{ + base->PMPROT = allowedModes; +} + +/*! + * @brief Gets the current power mode status. + * + * This function returns the current power mode stat. Once application + * switches the power mode, it should always check the stat to check whether it + * runs into the specified mode or not. An application should check + * this mode before switching to a different mode. The system requires that + * only certain modes can switch to other specific modes. See the + * reference manual for details and the smc_power_state_t for information about + * the power stat. + * + * @param base SMC peripheral base address. + * @return Current power mode status. + */ +static inline smc_power_state_t SMC_GetPowerModeState(SMC_Type *base) +{ + return (smc_power_state_t)base->PMSTAT; +} + +/*! + * @brief Configure the system to RUN power mode. + * + * @param base SMC peripheral base address. + * @return SMC configuration error code. + */ +status_t SMC_SetPowerModeRun(SMC_Type *base); + +#if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) +/*! + * @brief Configure the system to HSRUN power mode. + * + * @param base SMC peripheral base address. + * @return SMC configuration error code. + */ +status_t SMC_SetPowerModeHsrun(SMC_Type *base); +#endif /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */ + +/*! + * @brief Configure the system to WAIT power mode. + * + * @param base SMC peripheral base address. + * @return SMC configuration error code. + */ +status_t SMC_SetPowerModeWait(SMC_Type *base); + +/*! + * @brief Configure the system to Stop power mode. + * + * @param base SMC peripheral base address. + * @param option Partial Stop mode option. + * @return SMC configuration error code. + */ +status_t SMC_SetPowerModeStop(SMC_Type *base, smc_partial_stop_option_t option); + +#if (defined(FSL_FEATURE_SMC_HAS_LPWUI) && FSL_FEATURE_SMC_HAS_LPWUI) +/*! + * @brief Configure the system to VLPR power mode. + * + * @param base SMC peripheral base address. + * @param wakeupMode Enter Normal Run mode if true, else stay in VLPR mode. + * @return SMC configuration error code. + */ +status_t SMC_SetPowerModeVlpr(SMC_Type *base, bool wakeupMode); +#else +/*! + * @brief Configure the system to VLPR power mode. + * + * @param base SMC peripheral base address. + * @return SMC configuration error code. + */ +status_t SMC_SetPowerModeVlpr(SMC_Type *base); +#endif /* FSL_FEATURE_SMC_HAS_LPWUI */ + +/*! + * @brief Configure the system to VLPW power mode. + * + * @param base SMC peripheral base address. + * @return SMC configuration error code. + */ +status_t SMC_SetPowerModeVlpw(SMC_Type *base); + +/*! + * @brief Configure the system to VLPS power mode. + * + * @param base SMC peripheral base address. + * @return SMC configuration error code. + */ +status_t SMC_SetPowerModeVlps(SMC_Type *base); + +#if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) +#if ((defined(FSL_FEATURE_SMC_HAS_LLS_SUBMODE) && FSL_FEATURE_SMC_HAS_LLS_SUBMODE) || \ + (defined(FSL_FEATURE_SMC_HAS_LPOPO) && FSL_FEATURE_SMC_HAS_LPOPO)) +/*! + * @brief Configure the system to LLS power mode. + * + * @param base SMC peripheral base address. + * @param config The LLS power mode configuration structure + * @return SMC configuration error code. + */ +status_t SMC_SetPowerModeLls(SMC_Type *base, const smc_power_mode_lls_config_t *config); +#else +/*! + * @brief Configure the system to LLS power mode. + * + * @param base SMC peripheral base address. + * @return SMC configuration error code. + */ +status_t SMC_SetPowerModeLls(SMC_Type *base); +#endif +#endif /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */ + +#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) +/*! + * @brief Configure the system to VLLS power mode. + * + * @param base SMC peripheral base address. + * @param config The VLLS power mode configuration structure. + * @return SMC configuration error code. + */ +status_t SMC_SetPowerModeVlls(SMC_Type *base, const smc_power_mode_vlls_config_t *config); +#endif /* FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE */ + +/*@}*/ + +#if defined(__cplusplus) +} +#endif /* __cplusplus */ + +/*! @}*/ + +#endif /* _FSL_SMC_H_ */ -- cgit v1.2.3