diff options
Diffstat (limited to 'freertos/Source/portable/GCC/ARM_CM3/portmacro.h')
| -rw-r--r-- | freertos/Source/portable/GCC/ARM_CM3/portmacro.h | 105 |
1 files changed, 93 insertions, 12 deletions
diff --git a/freertos/Source/portable/GCC/ARM_CM3/portmacro.h b/freertos/Source/portable/GCC/ARM_CM3/portmacro.h index 2aa8472..d44fc92 100644 --- a/freertos/Source/portable/GCC/ARM_CM3/portmacro.h +++ b/freertos/Source/portable/GCC/ARM_CM3/portmacro.h @@ -1,5 +1,5 @@ /* - FreeRTOS V8.2.3 - Copyright (C) 2015 Real Time Engineers Ltd. + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. All rights reserved VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. @@ -117,27 +117,34 @@ typedef unsigned long UBaseType_t; #define portBYTE_ALIGNMENT 8 /*-----------------------------------------------------------*/ - /* Scheduler utilities. */ -extern void vPortYield( void ); +#define portYIELD() \ +{ \ + /* Set a PendSV to request a context switch. */ \ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \ + \ + /* Barriers are normally not required but do ensure the code is completely \ + within the specified behaviour for the architecture. */ \ + __asm volatile( "dsb" ); \ + __asm volatile( "isb" ); \ +} + #define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) ) #define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) -#define portYIELD() vPortYield() -#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT +#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) portYIELD() #define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) /*-----------------------------------------------------------*/ /* Critical section management. */ extern void vPortEnterCritical( void ); extern void vPortExitCritical( void ); -extern uint32_t ulPortSetInterruptMask( void ); -extern void vPortClearInterruptMask( uint32_t ulNewMaskValue ); -#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetInterruptMask() -#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortClearInterruptMask(x) -#define portDISABLE_INTERRUPTS() ulPortSetInterruptMask() -#define portENABLE_INTERRUPTS() vPortClearInterruptMask(0) +#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI() +#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortSetBASEPRI(x) +#define portDISABLE_INTERRUPTS() vPortRaiseBASEPRI() +#define portENABLE_INTERRUPTS() vPortSetBASEPRI(0) #define portENTER_CRITICAL() vPortEnterCritical() #define portEXIT_CRITICAL() vPortExitCritical() + /*-----------------------------------------------------------*/ /* Task function macros as described on the FreeRTOS.org WEB site. These are @@ -181,7 +188,7 @@ not necessary for to use this port. They are defined so the common demo files /*-----------------------------------------------------------*/ - #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - ucPortCountLeadingZeros( ( uxReadyPriorities ) ) ) + #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) ) #endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ @@ -195,6 +202,80 @@ not necessary for to use this port. They are defined so the common demo files /* portNOP() is not required by this port. */ #define portNOP() +#define portINLINE __inline + +#ifndef portFORCE_INLINE + #define portFORCE_INLINE inline __attribute__(( always_inline)) +#endif + +portFORCE_INLINE static BaseType_t xPortIsInsideInterrupt( void ) +{ +uint32_t ulCurrentInterrupt; +BaseType_t xReturn; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) ); + + if( ulCurrentInterrupt == 0 ) + { + xReturn = pdFALSE; + } + else + { + xReturn = pdTRUE; + } + + return xReturn; +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortRaiseBASEPRI( void ) +{ +uint32_t ulNewBASEPRI; + + __asm volatile + ( + " mov %0, %1 \n" \ + " msr basepri, %0 \n" \ + " isb \n" \ + " dsb \n" \ + :"=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) + ); +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static uint32_t ulPortRaiseBASEPRI( void ) +{ +uint32_t ulOriginalBASEPRI, ulNewBASEPRI; + + __asm volatile + ( + " mrs %0, basepri \n" \ + " mov %1, %2 \n" \ + " msr basepri, %1 \n" \ + " isb \n" \ + " dsb \n" \ + :"=r" (ulOriginalBASEPRI), "=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) + ); + + /* This return will not be reached but is necessary to prevent compiler + warnings. */ + return ulOriginalBASEPRI; +} +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortSetBASEPRI( uint32_t ulNewMaskValue ) +{ + __asm volatile + ( + " msr basepri, %0 " :: "r" ( ulNewMaskValue ) + ); +} +/*-----------------------------------------------------------*/ + + #ifdef __cplusplus } #endif |