resync with FreeRTOS_BSP_1.0.1_iMX7D

3 files changed, 0 insertions, 1022 deletions

diff --git a/rtos/FreeRTOS/Source/portable/IAR/ARM_CM4F/port.c b/rtos/FreeRTOS/Source/portable/IAR/ARM_CM4F/port.c
deleted file mode 100644
index e78573a..0000000
--- a/rtos/FreeRTOS/Source/portable/IAR/ARM_CM4F/port.c
+++ /dev/null
@@ -1,639 +0,0 @@
-/*
-    FreeRTOS V8.0.0 - Copyright (C) 2014 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that has become a de facto standard.             *
-     *                                                                       *
-     *    Help yourself get started quickly and support the FreeRTOS         *
-     *    project by purchasing a FreeRTOS tutorial book, reference          *
-     *    manual, or both from: http://www.FreeRTOS.org/Documentation        *
-     *                                                                       *
-     *    Thank you!                                                         *
-     *                                                                       *
-    ***************************************************************************
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.
-
-    >>! NOTE: The modification to the GPL is included to allow you to distribute
-    >>! a combined work that includes FreeRTOS without being obliged to provide
-    >>! the source code for proprietary components outside of the FreeRTOS
-    >>! kernel.
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available from the following
-    link: http://www.freertos.org/a00114.html
-
-    1 tab == 4 spaces!
-
-    ***************************************************************************
-     *                                                                       *
-     *    Having a problem?  Start by reading the FAQ "My application does   *
-     *    not run, what could be wrong?"                                     *
-     *                                                                       *
-     *    http://www.FreeRTOS.org/FAQHelp.html                               *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org - Documentation, books, training, latest versions,
-    license and Real Time Engineers Ltd. contact details.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
-    Integrity Systems to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
-
-/*-----------------------------------------------------------
- * Implementation of functions defined in portable.h for the ARM CM4F port.
- *----------------------------------------------------------*/
-
-/* Compiler includes. */
-#include <intrinsics.h>
-
-/* Scheduler includes. */
-#include "FreeRTOS.h"
-#include "task.h"
-
-#ifndef __ARMVFP__
-	#error This port can only be used when the project options are configured to enable hardware floating point support.
-#endif
-
-#if configMAX_SYSCALL_INTERRUPT_PRIORITY == 0
-	#error configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0.  See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html
-#endif
-
-#ifndef configSYSTICK_CLOCK_HZ
-	#define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ
-	/* Ensure the SysTick is clocked at the same frequency as the core. */
-	#define portNVIC_SYSTICK_CLK_BIT	( 1UL << 2UL )
-#else
-	/* The way the SysTick is clocked is not modified in case it is not the same
-	as the core. */
-	#define portNVIC_SYSTICK_CLK_BIT	( 0 )
-#endif
-
-/* Constants required to manipulate the core.  Registers first... */
-#define portNVIC_SYSTICK_CTRL_REG			( * ( ( volatile uint32_t * ) 0xe000e010 ) )
-#define portNVIC_SYSTICK_LOAD_REG			( * ( ( volatile uint32_t * ) 0xe000e014 ) )
-#define portNVIC_SYSTICK_CURRENT_VALUE_REG	( * ( ( volatile uint32_t * ) 0xe000e018 ) )
-#define portNVIC_SYSPRI2_REG				( * ( ( volatile uint32_t * ) 0xe000ed20 ) )
-/* ...then bits in the registers. */
-#define portNVIC_SYSTICK_INT_BIT			( 1UL << 1UL )
-#define portNVIC_SYSTICK_ENABLE_BIT			( 1UL << 0UL )
-#define portNVIC_SYSTICK_COUNT_FLAG_BIT		( 1UL << 16UL )
-#define portNVIC_PENDSVCLEAR_BIT 			( 1UL << 27UL )
-#define portNVIC_PEND_SYSTICK_CLEAR_BIT		( 1UL << 25UL )
-
-#define portNVIC_PENDSV_PRI					( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL )
-#define portNVIC_SYSTICK_PRI				( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL )
-
-/* Constants required to check the validity of an interrupt priority. */
-#define portFIRST_USER_INTERRUPT_NUMBER		( 16 )
-#define portNVIC_IP_REGISTERS_OFFSET_16 	( 0xE000E3F0 )
-#define portAIRCR_REG						( * ( ( volatile uint32_t * ) 0xE000ED0C ) )
-#define portMAX_8_BIT_VALUE					( ( uint8_t ) 0xff )
-#define portTOP_BIT_OF_BYTE					( ( uint8_t ) 0x80 )
-#define portMAX_PRIGROUP_BITS				( ( uint8_t ) 7 )
-#define portPRIORITY_GROUP_MASK				( 0x07UL << 8UL )
-#define portPRIGROUP_SHIFT					( 8UL )
-
-/* Constants required to manipulate the VFP. */
-#define portFPCCR							( ( volatile uint32_t * ) 0xe000ef34 ) /* Floating point context control register. */
-#define portASPEN_AND_LSPEN_BITS			( 0x3UL << 30UL )
-
-/* Constants required to set up the initial stack. */
-#define portINITIAL_XPSR					( 0x01000000 )
-#define portINITIAL_EXEC_RETURN				( 0xfffffffd )
-
-/* The systick is a 24-bit counter. */
-#define portMAX_24_BIT_NUMBER				( 0xffffffUL )
-
-/* A fiddle factor to estimate the number of SysTick counts that would have
-occurred while the SysTick counter is stopped during tickless idle
-calculations. */
-#define portMISSED_COUNTS_FACTOR			( 45UL )
-
-
-/* Each task maintains its own interrupt status in the critical nesting
-variable. */
-static UBaseType_t uxCriticalNesting = 0xaaaaaaaa;
-
-/*
- * Setup the timer to generate the tick interrupts.  The implementation in this
- * file is weak to allow application writers to change the timer used to
- * generate the tick interrupt.
- */
-void vPortSetupTimerInterrupt( void );
-
-/*
- * Exception handlers.
- */
-void xPortSysTickHandler( void );
-
-/*
- * Start first task is a separate function so it can be tested in isolation.
- */
-extern void vPortStartFirstTask( void );
-
-/*
- * Turn the VFP on.
- */
-extern void vPortEnableVFP( void );
-
-/*
- * Used to catch tasks that attempt to return from their implementing function.
- */
-static void prvTaskExitError( void );
-
-/*-----------------------------------------------------------*/
-
-/*
- * The number of SysTick increments that make up one tick period.
- */
-#if configUSE_TICKLESS_IDLE == 1
-	static uint32_t ulTimerCountsForOneTick = 0;
-#endif /* configUSE_TICKLESS_IDLE */
-
-/*
- * The maximum number of tick periods that can be suppressed is limited by the
- * 24 bit resolution of the SysTick timer.
- */
-#if configUSE_TICKLESS_IDLE == 1
-	static uint32_t xMaximumPossibleSuppressedTicks = 0;
-#endif /* configUSE_TICKLESS_IDLE */
-
-/*
- * Compensate for the CPU cycles that pass while the SysTick is stopped (low
- * power functionality only.
- */
-#if configUSE_TICKLESS_IDLE == 1
-	static uint32_t ulStoppedTimerCompensation = 0;
-#endif /* configUSE_TICKLESS_IDLE */
-
-/*
- * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure
- * FreeRTOS API functions are not called from interrupts that have been assigned
- * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY.
- */
-#if ( configASSERT_DEFINED == 1 )
-	 static uint8_t ucMaxSysCallPriority = 0;
-	 static uint32_t ulMaxPRIGROUPValue = 0;
-	 static const volatile uint8_t * const pcInterruptPriorityRegisters = ( const volatile uint8_t * const ) portNVIC_IP_REGISTERS_OFFSET_16;
-#endif /* configASSERT_DEFINED */
-
-/*-----------------------------------------------------------*/
-
-/*
- * See header file for description.
- */
-StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
-{
-	/* Simulate the stack frame as it would be created by a context switch
-	interrupt. */
-
-	/* Offset added to account for the way the MCU uses the stack on entry/exit
-	of interrupts, and to ensure alignment. */
-	pxTopOfStack--;
-
-	*pxTopOfStack = portINITIAL_XPSR;	/* xPSR */
-	pxTopOfStack--;
-	*pxTopOfStack = ( StackType_t ) pxCode;	/* PC */
-	pxTopOfStack--;
-	*pxTopOfStack = ( StackType_t ) prvTaskExitError;	/* LR */
-
-	/* Save code space by skipping register initialisation. */
-	pxTopOfStack -= 5;	/* R12, R3, R2 and R1. */
-	*pxTopOfStack = ( StackType_t ) pvParameters;	/* R0 */
-
-	/* A save method is being used that requires each task to maintain its
-	own exec return value. */
-	pxTopOfStack--;
-	*pxTopOfStack = portINITIAL_EXEC_RETURN;
-
-	pxTopOfStack -= 8;	/* R11, R10, R9, R8, R7, R6, R5 and R4. */
-
-	return pxTopOfStack;
-}
-/*-----------------------------------------------------------*/
-
-static void prvTaskExitError( void )
-{
-	/* A function that implements a task must not exit or attempt to return to
-	its caller as there is nothing to return to.  If a task wants to exit it
-	should instead call vTaskDelete( NULL ).
-
-	Artificially force an assert() to be triggered if configASSERT() is
-	defined, then stop here so application writers can catch the error. */
-	configASSERT( uxCriticalNesting == ~0UL );
-	portDISABLE_INTERRUPTS();
-	for( ;; );
-}
-/*-----------------------------------------------------------*/
-
-/*
- * See header file for description.
- */
-BaseType_t xPortStartScheduler( void )
-{
-	#if( configASSERT_DEFINED == 1 )
-	{
-		volatile uint32_t ulOriginalPriority;
-		volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER );
-		volatile uint8_t ucMaxPriorityValue;
-
-		/* Determine the maximum priority from which ISR safe FreeRTOS API
-		functions can be called.  ISR safe functions are those that end in
-		"FromISR".  FreeRTOS maintains separate thread and ISR API functions to
-		ensure interrupt entry is as fast and simple as possible.
-
-		Save the interrupt priority value that is about to be clobbered. */
-		ulOriginalPriority = *pucFirstUserPriorityRegister;
-
-		/* Determine the number of priority bits available.  First write to all
-		possible bits. */
-		*pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE;
-
-		/* Read the value back to see how many bits stuck. */
-		ucMaxPriorityValue = *pucFirstUserPriorityRegister;
-
-		/* Use the same mask on the maximum system call priority. */
-		ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue;
-
-		/* Calculate the maximum acceptable priority group value for the number
-		of bits read back. */
-		ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS;
-		while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE )
-		{
-			ulMaxPRIGROUPValue--;
-			ucMaxPriorityValue <<= ( uint8_t ) 0x01;
-		}
-
-		/* Shift the priority group value back to its position within the AIRCR
-		register. */
-		ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT;
-		ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK;
-
-		/* Restore the clobbered interrupt priority register to its original
-		value. */
-		*pucFirstUserPriorityRegister = ulOriginalPriority;
-	}
-	#endif /* conifgASSERT_DEFINED */
-
-	/* Make PendSV and SysTick the lowest priority interrupts. */
-	portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI;
-	portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI;
-
-	/* Start the timer that generates the tick ISR.  Interrupts are disabled
-	here already. */
-	vPortSetupTimerInterrupt();
-
-	/* Initialise the critical nesting count ready for the first task. */
-	uxCriticalNesting = 0;
-
-	/* Ensure the VFP is enabled - it should be anyway. */
-	vPortEnableVFP();
-
-	/* Lazy save always. */
-	*( portFPCCR ) |= portASPEN_AND_LSPEN_BITS;
-
-	/* Start the first task. */
-	vPortStartFirstTask();
-
-	/* Should not get here! */
-	return 0;
-}
-/*-----------------------------------------------------------*/
-
-void vPortEndScheduler( void )
-{
-	/* Not implemented in ports where there is nothing to return to.
-	Artificially force an assert. */
-	configASSERT( uxCriticalNesting == 1000UL );
-}
-/*-----------------------------------------------------------*/
-
-void vPortYield( void )
-{
-	/* Set a PendSV to request a context switch. */
-	portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
-
-	/* Barriers are normally not required but do ensure the code is completely
-	within the specified behaviour for the architecture. */
-	__DSB();
-	__ISB();
-}
-/*-----------------------------------------------------------*/
-
-void vPortEnterCritical( void )
-{
-	portDISABLE_INTERRUPTS();
-	uxCriticalNesting++;
-	__DSB();
-	__ISB();
-}
-/*-----------------------------------------------------------*/
-
-void vPortExitCritical( void )
-{
-	configASSERT( uxCriticalNesting );
-	uxCriticalNesting--;
-	if( uxCriticalNesting == 0 )
-	{
-		portENABLE_INTERRUPTS();
-	}
-}
-/*-----------------------------------------------------------*/
-
-void xPortSysTickHandler( void )
-{
-	/* The SysTick runs at the lowest interrupt priority, so when this interrupt
-	executes all interrupts must be unmasked.  There is therefore no need to
-	save and then restore the interrupt mask value as its value is already
-	known. */
-	( void ) portSET_INTERRUPT_MASK_FROM_ISR();
-	{
-		/* Increment the RTOS tick. */
-		if( xTaskIncrementTick() != pdFALSE )
-		{
-			/* A context switch is required.  Context switching is performed in
-			the PendSV interrupt.  Pend the PendSV interrupt. */
-			portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
-		}
-	}
-	portCLEAR_INTERRUPT_MASK_FROM_ISR( 0 );
-}
-/*-----------------------------------------------------------*/
-
-#if configUSE_TICKLESS_IDLE == 1
-
-	__weak void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
-	{
-	uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements, ulSysTickCTRL;
-	TickType_t xModifiableIdleTime;
-
-		/* Make sure the SysTick reload value does not overflow the counter. */
-		if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
-		{
-			xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
-		}
-
-		/* Stop the SysTick momentarily.  The time the SysTick is stopped for
-		is accounted for as best it can be, but using the tickless mode will
-		inevitably result in some tiny drift of the time maintained by the
-		kernel with respect to calendar time. */
-		portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
-
-		/* Calculate the reload value required to wait xExpectedIdleTime
-		tick periods.  -1 is used because this code will execute part way
-		through one of the tick periods. */
-		ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
-		if( ulReloadValue > ulStoppedTimerCompensation )
-		{
-			ulReloadValue -= ulStoppedTimerCompensation;
-		}
-
-		/* Enter a critical section but don't use the taskENTER_CRITICAL()
-		method as that will mask interrupts that should exit sleep mode. */
-		__disable_interrupt();
-
-		/* If a context switch is pending or a task is waiting for the scheduler
-		to be unsuspended then abandon the low power entry. */
-		if( eTaskConfirmSleepModeStatus() == eAbortSleep )
-		{
-			/* Restart from whatever is left in the count register to complete
-			this tick period. */
-			portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
-
-			/* Restart SysTick. */
-			portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-
-			/* Reset the reload register to the value required for normal tick
-			periods. */
-			portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
-
-			/* Re-enable interrupts - see comments above __disable_interrupt()
-			call above. */
-			__enable_interrupt();
-		}
-		else
-		{
-			/* Set the new reload value. */
-			portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
-
-			/* Clear the SysTick count flag and set the count value back to
-			zero. */
-			portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
-
-			/* Restart SysTick. */
-			portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-
-			/* Sleep until something happens.  configPRE_SLEEP_PROCESSING() can
-			set its parameter to 0 to indicate that its implementation contains
-			its own wait for interrupt or wait for event instruction, and so wfi
-			should not be executed again.  However, the original expected idle
-			time variable must remain unmodified, so a copy is taken. */
-			xModifiableIdleTime = xExpectedIdleTime;
-			configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
-			if( xModifiableIdleTime > 0 )
-			{
-				__DSB();
-				__WFI();
-				__ISB();
-			}
-			configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
-
-			/* Stop SysTick.  Again, the time the SysTick is stopped for is
-			accounted for as best it can be, but using the tickless mode will
-			inevitably result in some tiny drift of the time maintained by the
-			kernel with respect to calendar time. */
-			ulSysTickCTRL = portNVIC_SYSTICK_CTRL_REG;
-			portNVIC_SYSTICK_CTRL_REG = ( ulSysTickCTRL & ~portNVIC_SYSTICK_ENABLE_BIT );
-
-			/* Re-enable interrupts - see comments above __disable_interrupt()
-			call above. */
-			__enable_interrupt();
-
-			if( ( ulSysTickCTRL & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
-			{
-				uint32_t ulCalculatedLoadValue;
-
-				/* The tick interrupt has already executed, and the SysTick
-				count reloaded with ulReloadValue.  Reset the
-				portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
-				period. */
-				ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
-
-				/* Don't allow a tiny value, or values that have somehow
-				underflowed because the post sleep hook did something
-				that took too long. */
-				if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
-				{
-					ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
-				}
-
-				portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
-
-				/* The tick interrupt handler will already have pended the tick
-				processing in the kernel.  As the pending tick will be
-				processed as soon as this function exits, the tick value
-				maintained by the tick is stepped forward by one less than the
-				time spent waiting. */
-				ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
-			}
-			else
-			{
-				/* Something other than the tick interrupt ended the sleep.
-				Work out how long the sleep lasted rounded to complete tick
-				periods (not the ulReload value which accounted for part
-				ticks). */
-				ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
-
-				/* How many complete tick periods passed while the processor
-				was waiting? */
-				ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
-
-				/* The reload value is set to whatever fraction of a single tick
-				period remains. */
-				portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1 ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
-			}
-
-			/* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
-			again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
-			value.  The critical section is used to ensure the tick interrupt
-			can only execute once in the case that the reload register is near
-			zero. */
-			portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
-			portENTER_CRITICAL();
-			{
-				portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
-				vTaskStepTick( ulCompleteTickPeriods );
-				portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
-			}
-			portEXIT_CRITICAL();
-		}
-	}
-
-#endif /* #if configUSE_TICKLESS_IDLE */
-/*-----------------------------------------------------------*/
-
-/*
- * Setup the systick timer to generate the tick interrupts at the required
- * frequency.
- */
-__weak void vPortSetupTimerInterrupt( void )
-{
-	/* Calculate the constants required to configure the tick interrupt. */
-	#if configUSE_TICKLESS_IDLE == 1
-	{
-		ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
-		xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
-		ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
-	}
-	#endif /* configUSE_TICKLESS_IDLE */
-
-	/* Configure SysTick to interrupt at the requested rate. */
-	portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
-	portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT );
-}
-/*-----------------------------------------------------------*/
-
-#if( configASSERT_DEFINED == 1 )
-
-	void vPortValidateInterruptPriority( void )
-	{
-	uint32_t ulCurrentInterrupt;
-	uint8_t ucCurrentPriority;
-
-		/* Obtain the number of the currently executing interrupt. */
-		__asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) );
-
-		/* Is the interrupt number a user defined interrupt? */
-		if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER )
-		{
-			/* Look up the interrupt's priority. */
-			ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ];
-
-			/* The following assertion will fail if a service routine (ISR) for
-			an interrupt that has been assigned a priority above
-			configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API
-			function.  ISR safe FreeRTOS API functions must *only* be called
-			from interrupts that have been assigned a priority at or below
-			configMAX_SYSCALL_INTERRUPT_PRIORITY.
-
-			Numerically low interrupt priority numbers represent logically high
-			interrupt priorities, therefore the priority of the interrupt must
-			be set to a value equal to or numerically *higher* than
-			configMAX_SYSCALL_INTERRUPT_PRIORITY.
-
-			Interrupts that	use the FreeRTOS API must not be left at their
-			default priority of	zero as that is the highest possible priority,
-			which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY,
-			and	therefore also guaranteed to be invalid.
-
-			FreeRTOS maintains separate thread and ISR API functions to ensure
-			interrupt entry is as fast and simple as possible.
-
-			The following links provide detailed information:
-			http://www.freertos.org/RTOS-Cortex-M3-M4.html
-			http://www.freertos.org/FAQHelp.html */
-			configASSERT( ucCurrentPriority >= ucMaxSysCallPriority );
-		}
-
-		/* Priority grouping:  The interrupt controller (NVIC) allows the bits
-		that define each interrupt's priority to be split between bits that
-		define the interrupt's pre-emption priority bits and bits that define
-		the interrupt's sub-priority.  For simplicity all bits must be defined
-		to be pre-emption priority bits.  The following assertion will fail if
-		this is not the case (if some bits represent a sub-priority).
-
-		If the application only uses CMSIS libraries for interrupt
-		configuration then the correct setting can be achieved on all Cortex-M
-		devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the
-		scheduler.  Note however that some vendor specific peripheral libraries
-		assume a non-zero priority group setting, in which cases using a value
-		of zero will result in unpredicable behaviour. */
-		configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue );
-	}
-
-#endif /* configASSERT_DEFINED */
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/rtos/FreeRTOS/Source/portable/IAR/ARM_CM4F/portasm.s b/rtos/FreeRTOS/Source/portable/IAR/ARM_CM4F/portasm.s
deleted file mode 100644
index e80e5fa..0000000
--- a/rtos/FreeRTOS/Source/portable/IAR/ARM_CM4F/portasm.s
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
-    FreeRTOS V8.0.0 - Copyright (C) 2014 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that has become a de facto standard.             *
-     *                                                                       *
-     *    Help yourself get started quickly and support the FreeRTOS         *
-     *    project by purchasing a FreeRTOS tutorial book, reference          *
-     *    manual, or both from: http://www.FreeRTOS.org/Documentation        *
-     *                                                                       *
-     *    Thank you!                                                         *
-     *                                                                       *
-    ***************************************************************************
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.
-
-    >>! NOTE: The modification to the GPL is included to allow you to distribute
-    >>! a combined work that includes FreeRTOS without being obliged to provide
-    >>! the source code for proprietary components outside of the FreeRTOS
-    >>! kernel.
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available from the following
-    link: http://www.freertos.org/a00114.html
-
-    1 tab == 4 spaces!
-
-    ***************************************************************************
-     *                                                                       *
-     *    Having a problem?  Start by reading the FAQ "My application does   *
-     *    not run, what could be wrong?"                                     *
-     *                                                                       *
-     *    http://www.FreeRTOS.org/FAQHelp.html                               *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org - Documentation, books, training, latest versions,
-    license and Real Time Engineers Ltd. contact details.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
-    Integrity Systems to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
-
-#include <FreeRTOSConfig.h>
-
-	RSEG    CODE:CODE(2)
-	thumb
-
-	EXTERN pxCurrentTCB
-	EXTERN vTaskSwitchContext
-
-	PUBLIC xPortPendSVHandler
-	PUBLIC ulPortSetInterruptMask
-	PUBLIC vPortClearInterruptMask
-	PUBLIC vPortSVCHandler
-	PUBLIC vPortStartFirstTask
-	PUBLIC vPortEnableVFP
-
-
-/*-----------------------------------------------------------*/
-
-xPortPendSVHandler:
-	mrs r0, psp
-	isb
-	/* Get the location of the current TCB. */
-	ldr	r3, =pxCurrentTCB
-	ldr	r2, [r3]
-
-	/* Is the task using the FPU context?  If so, push high vfp registers. */
-	tst r14, #0x10
-	it eq
-	vstmdbeq r0!, {s16-s31}
-
-	/* Save the core registers. */
-	stmdb r0!, {r4-r11, r14}
-
-	/* Save the new top of stack into the first member of the TCB. */
-	str r0, [r2]
-
-	stmdb sp!, {r3}
-	mov r0, #configMAX_SYSCALL_INTERRUPT_PRIORITY
-	msr basepri, r0
-	bl vTaskSwitchContext
-	mov r0, #0
-	msr basepri, r0
-	ldmia sp!, {r3}
-
-	/* The first item in pxCurrentTCB is the task top of stack. */
-	ldr r1, [r3]
-	ldr r0, [r1]
-
-	/* Pop the core registers. */
-	ldmia r0!, {r4-r11, r14}
-
-	/* Is the task using the FPU context?  If so, pop the high vfp registers
-	too. */
-	tst r14, #0x10
-	it eq
-	vldmiaeq r0!, {s16-s31}
-
-	msr psp, r0
-	isb
-	#ifdef WORKAROUND_PMU_CM001 /* XMC4000 specific errata */
-		#if WORKAROUND_PMU_CM001 == 1
-			push { r14 }
-			pop { pc }
-		#endif
-	#endif
-
-	bx r14
-
-
-/*-----------------------------------------------------------*/
-
-ulPortSetInterruptMask:
-	mrs r0, basepri
-	mov r1, #configMAX_SYSCALL_INTERRUPT_PRIORITY
-	msr basepri, r1
-	bx r14
-
-/*-----------------------------------------------------------*/
-
-vPortClearInterruptMask:
-	msr basepri, r0
-	bx r14
-
-/*-----------------------------------------------------------*/
-
-vPortSVCHandler:
-	/* Get the location of the current TCB. */
-	ldr	r3, =pxCurrentTCB
-	ldr r1, [r3]
-	ldr r0, [r1]
-	/* Pop the core registers. */
-	ldmia r0!, {r4-r11, r14}
-	msr psp, r0
-	isb
-	mov r0, #0
-	msr	basepri, r0
-	bx r14
-
-/*-----------------------------------------------------------*/
-
-vPortStartFirstTask
-	/* Use the NVIC offset register to locate the stack. */
-	ldr r0, =0xE000ED08
-	ldr r0, [r0]
-	ldr r0, [r0]
-	/* Set the msp back to the start of the stack. */
-	msr msp, r0
-	/* Call SVC to start the first task. */
-	cpsie i
-	dsb
-	isb
-	svc 0
-
-/*-----------------------------------------------------------*/
-
-vPortEnableVFP:
-	/* The FPU enable bits are in the CPACR. */
-	ldr.w r0, =0xE000ED88
-	ldr	r1, [r0]
-
-	/* Enable CP10 and CP11 coprocessors, then save back. */
-	orr	r1, r1, #( 0xf << 20 )
-	str r1, [r0]
-	bx	r14
-
-
-
-	END
-
diff --git a/rtos/FreeRTOS/Source/portable/IAR/ARM_CM4F/portmacro.h b/rtos/FreeRTOS/Source/portable/IAR/ARM_CM4F/portmacro.h
deleted file mode 100644
index a956142..0000000
--- a/rtos/FreeRTOS/Source/portable/IAR/ARM_CM4F/portmacro.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
-    FreeRTOS V8.0.0 - Copyright (C) 2014 Real Time Engineers Ltd.
-    All rights reserved
-
-    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
-
-    ***************************************************************************
-     *                                                                       *
-     *    FreeRTOS provides completely free yet professionally developed,    *
-     *    robust, strictly quality controlled, supported, and cross          *
-     *    platform software that has become a de facto standard.             *
-     *                                                                       *
-     *    Help yourself get started quickly and support the FreeRTOS         *
-     *    project by purchasing a FreeRTOS tutorial book, reference          *
-     *    manual, or both from: http://www.FreeRTOS.org/Documentation        *
-     *                                                                       *
-     *    Thank you!                                                         *
-     *                                                                       *
-    ***************************************************************************
-
-    This file is part of the FreeRTOS distribution.
-
-    FreeRTOS is free software; you can redistribute it and/or modify it under
-    the terms of the GNU General Public License (version 2) as published by the
-    Free Software Foundation >>!AND MODIFIED BY!<< the FreeRTOS exception.
-
-    >>! NOTE: The modification to the GPL is included to allow you to distribute
-    >>! a combined work that includes FreeRTOS without being obliged to provide
-    >>! the source code for proprietary components outside of the FreeRTOS
-    >>! kernel.
-
-    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
-    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-    FOR A PARTICULAR PURPOSE.  Full license text is available from the following
-    link: http://www.freertos.org/a00114.html
-
-    1 tab == 4 spaces!
-
-    ***************************************************************************
-     *                                                                       *
-     *    Having a problem?  Start by reading the FAQ "My application does   *
-     *    not run, what could be wrong?"                                     *
-     *                                                                       *
-     *    http://www.FreeRTOS.org/FAQHelp.html                               *
-     *                                                                       *
-    ***************************************************************************
-
-    http://www.FreeRTOS.org - Documentation, books, training, latest versions,
-    license and Real Time Engineers Ltd. contact details.
-
-    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
-    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
-    compatible FAT file system, and our tiny thread aware UDP/IP stack.
-
-    http://www.OpenRTOS.com - Real Time Engineers ltd license FreeRTOS to High
-    Integrity Systems to sell under the OpenRTOS brand.  Low cost OpenRTOS
-    licenses offer ticketed support, indemnification and middleware.
-
-    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
-    engineered and independently SIL3 certified version for use in safety and
-    mission critical applications that require provable dependability.
-
-    1 tab == 4 spaces!
-*/
-
-
-#ifndef PORTMACRO_H
-#define PORTMACRO_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*-----------------------------------------------------------
- * Port specific definitions.
- *
- * The settings in this file configure FreeRTOS correctly for the
- * given hardware and compiler.
- *
- * These settings should not be altered.
- *-----------------------------------------------------------
- */
-
-/* Type definitions. */
-#define portCHAR		char
-#define portFLOAT		float
-#define portDOUBLE		double
-#define portLONG		long
-#define portSHORT		short
-#define portSTACK_TYPE	uint32_t
-#define portBASE_TYPE	long
-
-typedef portSTACK_TYPE StackType_t;
-typedef long BaseType_t;
-typedef unsigned long UBaseType_t;
-
-#if( configUSE_16_BIT_TICKS == 1 )
-	typedef uint16_t TickType_t;
-	#define portMAX_DELAY ( TickType_t ) 0xffff
-#else
-	typedef uint32_t TickType_t;
-	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
-#endif
-/*-----------------------------------------------------------*/
-
-/* Architecture specifics. */
-#define portSTACK_GROWTH			( -1 )
-#define portTICK_PERIOD_MS			( ( TickType_t ) 1000 / configTICK_RATE_HZ )
-#define portBYTE_ALIGNMENT			8
-/*-----------------------------------------------------------*/
-
-/* Scheduler utilities. */
-extern void vPortYield( void );
-#define portNVIC_INT_CTRL_REG		( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
-#define portNVIC_PENDSVSET_BIT		( 1UL << 28UL )
-#define portYIELD()					vPortYield()
-#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT
-#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
-/*-----------------------------------------------------------*/
-
-/* Architecture specific optimisations. */
-#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
-
-	/* Check the configuration. */
-	#if( configMAX_PRIORITIES > 32 )
-		#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32.  It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
-	#endif
-
-	/* Store/clear the ready priorities in a bit map. */
-	#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
-	#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
-
-	/*-----------------------------------------------------------*/
-
-	#include <intrinsics.h>
-	#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __CLZ( ( uxReadyPriorities ) ) )
-
-#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
-/*-----------------------------------------------------------*/
-
-/* Critical section management. */
-extern void vPortEnterCritical( void );
-extern void vPortExitCritical( void );
-extern uint32_t ulPortSetInterruptMask( void );
-extern void vPortClearInterruptMask( uint32_t ulNewMask );
-
-#define portDISABLE_INTERRUPTS()				ulPortSetInterruptMask()
-#define portENABLE_INTERRUPTS()					vPortClearInterruptMask( 0 )
-#define portENTER_CRITICAL()					vPortEnterCritical()
-#define portEXIT_CRITICAL()						vPortExitCritical()
-#define portSET_INTERRUPT_MASK_FROM_ISR()		ulPortSetInterruptMask()
-#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x)	vPortClearInterruptMask( x )
-/*-----------------------------------------------------------*/
-
-/* Tickless idle/low power functionality. */
-#ifndef portSUPPRESS_TICKS_AND_SLEEP
-	extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
-	#define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
-#endif
-
-/*-----------------------------------------------------------*/
-
-/* Task function macros as described on the FreeRTOS.org WEB site.  These are
-not necessary for to use this port.  They are defined so the common demo files
-(which build with all the ports) will build. */
-#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
-#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
-/*-----------------------------------------------------------*/
-
-#ifdef configASSERT
-	void vPortValidateInterruptPriority( void );
-	#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() 	vPortValidateInterruptPriority()
-#endif
-
-/* portNOP() is not required by this port. */
-#define portNOP()
-
-/* Suppress warnings that are generated by the IAR tools, but cannot be fixed in
-the source code because to do so would cause other compilers to generate
-warnings. */
-#pragma diag_suppress=Pe191
-#pragma diag_suppress=Pa082
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* PORTMACRO_H */
-