// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
 * Copyright 2023 Toradex
 */

// Verdin AM62 Mezzanine single-channel LVDS

/dts-v1/;
/plugin/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>

#include "verdin-am62_mezzanine_backlight.dtsi"

/ {
	compatible = "toradex,verdin-am62";
};

&{/} {
	panel-lvds-mez {
		compatible = "panel-lvds";
		backlight = <&backlight_mezzanine>;
		data-mapping = "vesa-24";
		height-mm = <136>;
		width-mm = <217>;

		panel-timing {
			clock-frequency = <68900000 71100000 73400000>;
			de-active = <1>;
			hactive = <1280 1280 1280>;
			hback-porch = <23 60 71>;
			hfront-porch = <23 60 71>;
			hsync-active = <0>;
			hsync-len = <15 40 47>;
			pixelclk-active = <1>; /* positive edge */
			vactive = <800 800 800>;
			vback-porch = <5 7 10>;
			vfront-porch = <5 7 10>;
			vsync-active = <0>;
			vsync-len = <6 9 12>;
		};

		port {
			panel_lvds_in: endpoint {
				remote-endpoint = <&oldi_out0>;
			};
		};
	};
};

&dss {
	status = "okay";
};

/*
 * If the bridge is missing setting up dss will fail. As this bridge
 * isn't available on all SKU disable it here.
 * Thus having an overlay for the DSI output enabled concurrently
 * with this one will not work.
 */
&dsi_bridge {
	status = "disabled";
};

&dss_ports {
	#address-cells = <1>;
	#size-cells = <0>;

	/* VP1: LVDS Output (OLDI TX 0) */
	port@0 {
		reg = <0>;

		oldi_out0: endpoint {
			remote-endpoint = <&panel_lvds_in>;
		};
	};
};

/* Verdin I2C_2_DSI */
&main_i2c2 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	touch-mezzanine@4a {
		compatible = "atmel,maxtouch";
		reg = <0x4a>;
		/*
		 * Already muxed as GPIOs in k3-am625-verdin-dev.dtsi
		 * pinctrl-names = "default";
		 * pinctrl-0 = <&pinctrl_gpio_2 &pinctrl_gpio_3>;
		 */
		/* Verdin GPIO_3 (SODIMM 210) */
		interrupt-parent = <&mcu_gpio0>;
		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
		/* Verdin GPIO_2 (SODIMM 208) */
		reset-gpios = <&mcu_gpio0 2 GPIO_ACTIVE_LOW>;
	};
};