diff options
author | Max Krummenacher <max.krummenacher@toradex.com> | 2022-06-29 18:21:17 +0200 |
---|---|---|
committer | Max Krummenacher <max.krummenacher@toradex.com> | 2022-06-29 18:38:50 +0200 |
commit | 1c4c2bd1280b16da3fe482ab441696a61c494ebe (patch) | |
tree | 4eb462f2ad88bb4bae232941afefaedb3365a643 /overlays | |
parent | 588cf1466217e823a48152edf6b0116f3499b6dd (diff) |
colibri-imx6ull: atmel-mxt: connector: fully specify the used pins
Depending on the carrier board the full device tree either configures
the touscreen for use with the adapter or the dedicated connector.
Thus the overlay should not assume that the configuration is already
done for the connector pinout.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Diffstat (limited to 'overlays')
-rw-r--r-- | overlays/colibri-imx6ull_atmel-mxt-connector_overlay.dts | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/overlays/colibri-imx6ull_atmel-mxt-connector_overlay.dts b/overlays/colibri-imx6ull_atmel-mxt-connector_overlay.dts index 0487541..4aea144 100644 --- a/overlays/colibri-imx6ull_atmel-mxt-connector_overlay.dts +++ b/overlays/colibri-imx6ull_atmel-mxt-connector_overlay.dts @@ -9,11 +9,18 @@ /dts-v1/; /plugin/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "toradex,colibri-imx6ull-emmc"; }; &atmel_mxt_ts { + pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* SODIMM_107, INT */ + reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; /* SODIMM_106, RST */ status = "okay"; }; |