Backports v4.19.24

Backports generated by toradex backports 515a1fa55cda2b1d952872e1786857481bd54fcc
against mainline kernel tag v4.19.24

Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com>

1 files changed, 1454 insertions, 0 deletions

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
new file mode 100644
index 0000000..f0d593c
--- /dev/null
+++ b/drivers/bluetooth/hci_qca.c
@@ -0,0 +1,1454 @@
+/*
+ *  Bluetooth Software UART Qualcomm protocol
+ *
+ *  HCI_IBS (HCI In-Band Sleep) is Qualcomm's power management
+ *  protocol extension to H4.
+ *
+ *  Copyright (C) 2007 Texas Instruments, Inc.
+ *  Copyright (c) 2010, 2012, 2018 The Linux Foundation. All rights reserved.
+ *
+ *  Acknowledgements:
+ *  This file is based on hci_ll.c, which was...
+ *  Written by Ohad Ben-Cohen <ohad@bencohen.org>
+ *  which was in turn based on hci_h4.c, which was written
+ *  by Maxim Krasnyansky and Marcel Holtmann.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/serdev.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include "btqca.h"
+
+/* HCI_IBS protocol messages */
+#define HCI_IBS_SLEEP_IND	0xFE
+#define HCI_IBS_WAKE_IND	0xFD
+#define HCI_IBS_WAKE_ACK	0xFC
+#define HCI_MAX_IBS_SIZE	10
+
+/* Controller states */
+#define STATE_IN_BAND_SLEEP_ENABLED	1
+
+#define IBS_WAKE_RETRANS_TIMEOUT_MS	100
+#define IBS_TX_IDLE_TIMEOUT_MS		2000
+#define BAUDRATE_SETTLE_TIMEOUT_MS	300
+
+/* susclk rate */
+#define SUSCLK_RATE_32KHZ	32768
+
+/* HCI_IBS transmit side sleep protocol states */
+enum tx_ibs_states {
+	HCI_IBS_TX_ASLEEP,
+	HCI_IBS_TX_WAKING,
+	HCI_IBS_TX_AWAKE,
+};
+
+/* HCI_IBS receive side sleep protocol states */
+enum rx_states {
+	HCI_IBS_RX_ASLEEP,
+	HCI_IBS_RX_AWAKE,
+};
+
+/* HCI_IBS transmit and receive side clock state vote */
+enum hci_ibs_clock_state_vote {
+	HCI_IBS_VOTE_STATS_UPDATE,
+	HCI_IBS_TX_VOTE_CLOCK_ON,
+	HCI_IBS_TX_VOTE_CLOCK_OFF,
+	HCI_IBS_RX_VOTE_CLOCK_ON,
+	HCI_IBS_RX_VOTE_CLOCK_OFF,
+};
+
+struct qca_data {
+	struct hci_uart *hu;
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+	struct sk_buff_head tx_wait_q;	/* HCI_IBS wait queue	*/
+	spinlock_t hci_ibs_lock;	/* HCI_IBS state lock	*/
+	u8 tx_ibs_state;	/* HCI_IBS transmit side power state*/
+	u8 rx_ibs_state;	/* HCI_IBS receive side power state */
+	bool tx_vote;		/* Clock must be on for TX */
+	bool rx_vote;		/* Clock must be on for RX */
+	struct timer_list tx_idle_timer;
+	u32 tx_idle_delay;
+	struct timer_list wake_retrans_timer;
+	u32 wake_retrans;
+	struct workqueue_struct *workqueue;
+	struct work_struct ws_awake_rx;
+	struct work_struct ws_awake_device;
+	struct work_struct ws_rx_vote_off;
+	struct work_struct ws_tx_vote_off;
+	unsigned long flags;
+
+	/* For debugging purpose */
+	u64 ibs_sent_wacks;
+	u64 ibs_sent_slps;
+	u64 ibs_sent_wakes;
+	u64 ibs_recv_wacks;
+	u64 ibs_recv_slps;
+	u64 ibs_recv_wakes;
+	u64 vote_last_jif;
+	u32 vote_on_ms;
+	u32 vote_off_ms;
+	u64 tx_votes_on;
+	u64 rx_votes_on;
+	u64 tx_votes_off;
+	u64 rx_votes_off;
+	u64 votes_on;
+	u64 votes_off;
+};
+
+enum qca_speed_type {
+	QCA_INIT_SPEED = 1,
+	QCA_OPER_SPEED
+};
+
+/*
+ * Voltage regulator information required for configuring the
+ * QCA Bluetooth chipset
+ */
+struct qca_vreg {
+	const char *name;
+	unsigned int min_uV;
+	unsigned int max_uV;
+	unsigned int load_uA;
+};
+
+struct qca_vreg_data {
+	enum qca_btsoc_type soc_type;
+	struct qca_vreg *vregs;
+	size_t num_vregs;
+};
+
+/*
+ * Platform data for the QCA Bluetooth power driver.
+ */
+struct qca_power {
+	struct device *dev;
+	const struct qca_vreg_data *vreg_data;
+	struct regulator_bulk_data *vreg_bulk;
+	bool vregs_on;
+};
+
+struct qca_serdev {
+	struct hci_uart	 serdev_hu;
+	struct gpio_desc *bt_en;
+	struct clk	 *susclk;
+	enum qca_btsoc_type btsoc_type;
+	struct qca_power *bt_power;
+	u32 init_speed;
+	u32 oper_speed;
+};
+
+static int qca_power_setup(struct hci_uart *hu, bool on);
+static void qca_power_shutdown(struct hci_uart *hu);
+
+static void __serial_clock_on(struct tty_struct *tty)
+{
+	/* TODO: Some chipset requires to enable UART clock on client
+	 * side to save power consumption or manual work is required.
+	 * Please put your code to control UART clock here if needed
+	 */
+}
+
+static void __serial_clock_off(struct tty_struct *tty)
+{
+	/* TODO: Some chipset requires to disable UART clock on client
+	 * side to save power consumption or manual work is required.
+	 * Please put your code to control UART clock off here if needed
+	 */
+}
+
+/* serial_clock_vote needs to be called with the ibs lock held */
+static void serial_clock_vote(unsigned long vote, struct hci_uart *hu)
+{
+	struct qca_data *qca = hu->priv;
+	unsigned int diff;
+
+	bool old_vote = (qca->tx_vote | qca->rx_vote);
+	bool new_vote;
+
+	switch (vote) {
+	case HCI_IBS_VOTE_STATS_UPDATE:
+		diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
+
+		if (old_vote)
+			qca->vote_off_ms += diff;
+		else
+			qca->vote_on_ms += diff;
+		return;
+
+	case HCI_IBS_TX_VOTE_CLOCK_ON:
+		qca->tx_vote = true;
+		qca->tx_votes_on++;
+		new_vote = true;
+		break;
+
+	case HCI_IBS_RX_VOTE_CLOCK_ON:
+		qca->rx_vote = true;
+		qca->rx_votes_on++;
+		new_vote = true;
+		break;
+
+	case HCI_IBS_TX_VOTE_CLOCK_OFF:
+		qca->tx_vote = false;
+		qca->tx_votes_off++;
+		new_vote = qca->rx_vote | qca->tx_vote;
+		break;
+
+	case HCI_IBS_RX_VOTE_CLOCK_OFF:
+		qca->rx_vote = false;
+		qca->rx_votes_off++;
+		new_vote = qca->rx_vote | qca->tx_vote;
+		break;
+
+	default:
+		BT_ERR("Voting irregularity");
+		return;
+	}
+
+	if (new_vote != old_vote) {
+		if (new_vote)
+			__serial_clock_on(hu->tty);
+		else
+			__serial_clock_off(hu->tty);
+
+		BT_DBG("Vote serial clock %s(%s)", new_vote ? "true" : "false",
+		       vote ? "true" : "false");
+
+		diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
+
+		if (new_vote) {
+			qca->votes_on++;
+			qca->vote_off_ms += diff;
+		} else {
+			qca->votes_off++;
+			qca->vote_on_ms += diff;
+		}
+		qca->vote_last_jif = jiffies;
+	}
+}
+
+/* Builds and sends an HCI_IBS command packet.
+ * These are very simple packets with only 1 cmd byte.
+ */
+static int send_hci_ibs_cmd(u8 cmd, struct hci_uart *hu)
+{
+	int err = 0;
+	struct sk_buff *skb = NULL;
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p send hci ibs cmd 0x%x", hu, cmd);
+
+	skb = bt_skb_alloc(1, GFP_ATOMIC);
+	if (!skb) {
+		BT_ERR("Failed to allocate memory for HCI_IBS packet");
+		return -ENOMEM;
+	}
+
+	/* Assign HCI_IBS type */
+	skb_put_u8(skb, cmd);
+
+	skb_queue_tail(&qca->txq, skb);
+
+	return err;
+}
+
+static void qca_wq_awake_device(struct work_struct *work)
+{
+	struct qca_data *qca = container_of(work, struct qca_data,
+					    ws_awake_device);
+	struct hci_uart *hu = qca->hu;
+	unsigned long retrans_delay;
+
+	BT_DBG("hu %p wq awake device", hu);
+
+	/* Vote for serial clock */
+	serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_ON, hu);
+
+	spin_lock(&qca->hci_ibs_lock);
+
+	/* Send wake indication to device */
+	if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0)
+		BT_ERR("Failed to send WAKE to device");
+
+	qca->ibs_sent_wakes++;
+
+	/* Start retransmit timer */
+	retrans_delay = msecs_to_jiffies(qca->wake_retrans);
+	mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
+
+	spin_unlock(&qca->hci_ibs_lock);
+
+	/* Actually send the packets */
+	hci_uart_tx_wakeup(hu);
+}
+
+static void qca_wq_awake_rx(struct work_struct *work)
+{
+	struct qca_data *qca = container_of(work, struct qca_data,
+					    ws_awake_rx);
+	struct hci_uart *hu = qca->hu;
+
+	BT_DBG("hu %p wq awake rx", hu);
+
+	serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_ON, hu);
+
+	spin_lock(&qca->hci_ibs_lock);
+	qca->rx_ibs_state = HCI_IBS_RX_AWAKE;
+
+	/* Always acknowledge device wake up,
+	 * sending IBS message doesn't count as TX ON.
+	 */
+	if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0)
+		BT_ERR("Failed to acknowledge device wake up");
+
+	qca->ibs_sent_wacks++;
+
+	spin_unlock(&qca->hci_ibs_lock);
+
+	/* Actually send the packets */
+	hci_uart_tx_wakeup(hu);
+}
+
+static void qca_wq_serial_rx_clock_vote_off(struct work_struct *work)
+{
+	struct qca_data *qca = container_of(work, struct qca_data,
+					    ws_rx_vote_off);
+	struct hci_uart *hu = qca->hu;
+
+	BT_DBG("hu %p rx clock vote off", hu);
+
+	serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_OFF, hu);
+}
+
+static void qca_wq_serial_tx_clock_vote_off(struct work_struct *work)
+{
+	struct qca_data *qca = container_of(work, struct qca_data,
+					    ws_tx_vote_off);
+	struct hci_uart *hu = qca->hu;
+
+	BT_DBG("hu %p tx clock vote off", hu);
+
+	/* Run HCI tx handling unlocked */
+	hci_uart_tx_wakeup(hu);
+
+	/* Now that message queued to tty driver, vote for tty clocks off.
+	 * It is up to the tty driver to pend the clocks off until tx done.
+	 */
+	serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_OFF, hu);
+}
+
+static void hci_ibs_tx_idle_timeout(struct timer_list *t)
+{
+	struct qca_data *qca = from_timer(qca, t, tx_idle_timer);
+	struct hci_uart *hu = qca->hu;
+	unsigned long flags;
+
+	BT_DBG("hu %p idle timeout in %d state", hu, qca->tx_ibs_state);
+
+	spin_lock_irqsave_nested(&qca->hci_ibs_lock,
+				 flags, SINGLE_DEPTH_NESTING);
+
+	switch (qca->tx_ibs_state) {
+	case HCI_IBS_TX_AWAKE:
+		/* TX_IDLE, go to SLEEP */
+		if (send_hci_ibs_cmd(HCI_IBS_SLEEP_IND, hu) < 0) {
+			BT_ERR("Failed to send SLEEP to device");
+			break;
+		}
+		qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
+		qca->ibs_sent_slps++;
+		queue_work(qca->workqueue, &qca->ws_tx_vote_off);
+		break;
+
+	case HCI_IBS_TX_ASLEEP:
+	case HCI_IBS_TX_WAKING:
+		/* Fall through */
+
+	default:
+		BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+}
+
+static void hci_ibs_wake_retrans_timeout(struct timer_list *t)
+{
+	struct qca_data *qca = from_timer(qca, t, wake_retrans_timer);
+	struct hci_uart *hu = qca->hu;
+	unsigned long flags, retrans_delay;
+	bool retransmit = false;
+
+	BT_DBG("hu %p wake retransmit timeout in %d state",
+		hu, qca->tx_ibs_state);
+
+	spin_lock_irqsave_nested(&qca->hci_ibs_lock,
+				 flags, SINGLE_DEPTH_NESTING);
+
+	switch (qca->tx_ibs_state) {
+	case HCI_IBS_TX_WAKING:
+		/* No WAKE_ACK, retransmit WAKE */
+		retransmit = true;
+		if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0) {
+			BT_ERR("Failed to acknowledge device wake up");
+			break;
+		}
+		qca->ibs_sent_wakes++;
+		retrans_delay = msecs_to_jiffies(qca->wake_retrans);
+		mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
+		break;
+
+	case HCI_IBS_TX_ASLEEP:
+	case HCI_IBS_TX_AWAKE:
+		/* Fall through */
+
+	default:
+		BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	if (retransmit)
+		hci_uart_tx_wakeup(hu);
+}
+
+/* Initialize protocol */
+static int qca_open(struct hci_uart *hu)
+{
+	struct qca_serdev *qcadev;
+	struct qca_data *qca;
+	int ret;
+
+	BT_DBG("hu %p qca_open", hu);
+
+	qca = kzalloc(sizeof(struct qca_data), GFP_KERNEL);
+	if (!qca)
+		return -ENOMEM;
+
+	skb_queue_head_init(&qca->txq);
+	skb_queue_head_init(&qca->tx_wait_q);
+	spin_lock_init(&qca->hci_ibs_lock);
+	qca->workqueue = alloc_ordered_workqueue("qca_wq", 0);
+	if (!qca->workqueue) {
+		BT_ERR("QCA Workqueue not initialized properly");
+		kfree(qca);
+		return -ENOMEM;
+	}
+
+	INIT_WORK(&qca->ws_awake_rx, qca_wq_awake_rx);
+	INIT_WORK(&qca->ws_awake_device, qca_wq_awake_device);
+	INIT_WORK(&qca->ws_rx_vote_off, qca_wq_serial_rx_clock_vote_off);
+	INIT_WORK(&qca->ws_tx_vote_off, qca_wq_serial_tx_clock_vote_off);
+
+	qca->hu = hu;
+
+	/* Assume we start with both sides asleep -- extra wakes OK */
+	qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
+	qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
+
+	/* clocks actually on, but we start votes off */
+	qca->tx_vote = false;
+	qca->rx_vote = false;
+	qca->flags = 0;
+
+	qca->ibs_sent_wacks = 0;
+	qca->ibs_sent_slps = 0;
+	qca->ibs_sent_wakes = 0;
+	qca->ibs_recv_wacks = 0;
+	qca->ibs_recv_slps = 0;
+	qca->ibs_recv_wakes = 0;
+	qca->vote_last_jif = jiffies;
+	qca->vote_on_ms = 0;
+	qca->vote_off_ms = 0;
+	qca->votes_on = 0;
+	qca->votes_off = 0;
+	qca->tx_votes_on = 0;
+	qca->tx_votes_off = 0;
+	qca->rx_votes_on = 0;
+	qca->rx_votes_off = 0;
+
+	hu->priv = qca;
+
+	if (hu->serdev) {
+		serdev_device_open(hu->serdev);
+
+		qcadev = serdev_device_get_drvdata(hu->serdev);
+		if (qcadev->btsoc_type != QCA_WCN3990) {
+			gpiod_set_value_cansleep(qcadev->bt_en, 1);
+		} else {
+			hu->init_speed = qcadev->init_speed;
+			hu->oper_speed = qcadev->oper_speed;
+			ret = qca_power_setup(hu, true);
+			if (ret) {
+				destroy_workqueue(qca->workqueue);
+				kfree_skb(qca->rx_skb);
+				hu->priv = NULL;
+				kfree(qca);
+				return ret;
+			}
+		}
+	}
+
+	timer_setup(&qca->wake_retrans_timer, hci_ibs_wake_retrans_timeout, 0);
+	qca->wake_retrans = IBS_WAKE_RETRANS_TIMEOUT_MS;
+
+	timer_setup(&qca->tx_idle_timer, hci_ibs_tx_idle_timeout, 0);
+	qca->tx_idle_delay = IBS_TX_IDLE_TIMEOUT_MS;
+
+	BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
+	       qca->tx_idle_delay, qca->wake_retrans);
+
+	return 0;
+}
+
+static void qca_debugfs_init(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+	struct dentry *ibs_dir;
+	umode_t mode;
+
+	if (!hdev->debugfs)
+		return;
+
+	ibs_dir = debugfs_create_dir("ibs", hdev->debugfs);
+
+	/* read only */
+	mode = S_IRUGO;
+	debugfs_create_u8("tx_ibs_state", mode, ibs_dir, &qca->tx_ibs_state);
+	debugfs_create_u8("rx_ibs_state", mode, ibs_dir, &qca->rx_ibs_state);
+	debugfs_create_u64("ibs_sent_sleeps", mode, ibs_dir,
+			   &qca->ibs_sent_slps);
+	debugfs_create_u64("ibs_sent_wakes", mode, ibs_dir,
+			   &qca->ibs_sent_wakes);
+	debugfs_create_u64("ibs_sent_wake_acks", mode, ibs_dir,
+			   &qca->ibs_sent_wacks);
+	debugfs_create_u64("ibs_recv_sleeps", mode, ibs_dir,
+			   &qca->ibs_recv_slps);
+	debugfs_create_u64("ibs_recv_wakes", mode, ibs_dir,
+			   &qca->ibs_recv_wakes);
+	debugfs_create_u64("ibs_recv_wake_acks", mode, ibs_dir,
+			   &qca->ibs_recv_wacks);
+	debugfs_create_bool("tx_vote", mode, ibs_dir, &qca->tx_vote);
+	debugfs_create_u64("tx_votes_on", mode, ibs_dir, &qca->tx_votes_on);
+	debugfs_create_u64("tx_votes_off", mode, ibs_dir, &qca->tx_votes_off);
+	debugfs_create_bool("rx_vote", mode, ibs_dir, &qca->rx_vote);
+	debugfs_create_u64("rx_votes_on", mode, ibs_dir, &qca->rx_votes_on);
+	debugfs_create_u64("rx_votes_off", mode, ibs_dir, &qca->rx_votes_off);
+	debugfs_create_u64("votes_on", mode, ibs_dir, &qca->votes_on);
+	debugfs_create_u64("votes_off", mode, ibs_dir, &qca->votes_off);
+	debugfs_create_u32("vote_on_ms", mode, ibs_dir, &qca->vote_on_ms);
+	debugfs_create_u32("vote_off_ms", mode, ibs_dir, &qca->vote_off_ms);
+
+	/* read/write */
+	mode = S_IRUGO | S_IWUSR;
+	debugfs_create_u32("wake_retrans", mode, ibs_dir, &qca->wake_retrans);
+	debugfs_create_u32("tx_idle_delay", mode, ibs_dir,
+			   &qca->tx_idle_delay);
+}
+
+/* Flush protocol data */
+static int qca_flush(struct hci_uart *hu)
+{
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p qca flush", hu);
+
+	skb_queue_purge(&qca->tx_wait_q);
+	skb_queue_purge(&qca->txq);
+
+	return 0;
+}
+
+/* Close protocol */
+static int qca_close(struct hci_uart *hu)
+{
+	struct qca_serdev *qcadev;
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p qca close", hu);
+
+	serial_clock_vote(HCI_IBS_VOTE_STATS_UPDATE, hu);
+
+	skb_queue_purge(&qca->tx_wait_q);
+	skb_queue_purge(&qca->txq);
+	del_timer(&qca->tx_idle_timer);
+	del_timer(&qca->wake_retrans_timer);
+	destroy_workqueue(qca->workqueue);
+	qca->hu = NULL;
+
+	if (hu->serdev) {
+		qcadev = serdev_device_get_drvdata(hu->serdev);
+		if (qcadev->btsoc_type == QCA_WCN3990)
+			qca_power_shutdown(hu);
+		else
+			gpiod_set_value_cansleep(qcadev->bt_en, 0);
+
+		serdev_device_close(hu->serdev);
+	}
+
+	kfree_skb(qca->rx_skb);
+
+	hu->priv = NULL;
+
+	kfree(qca);
+
+	return 0;
+}
+
+/* Called upon a wake-up-indication from the device.
+ */
+static void device_want_to_wakeup(struct hci_uart *hu)
+{
+	unsigned long flags;
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p want to wake up", hu);
+
+	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+	qca->ibs_recv_wakes++;
+
+	switch (qca->rx_ibs_state) {
+	case HCI_IBS_RX_ASLEEP:
+		/* Make sure clock is on - we may have turned clock off since
+		 * receiving the wake up indicator awake rx clock.
+		 */
+		queue_work(qca->workqueue, &qca->ws_awake_rx);
+		spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+		return;
+
+	case HCI_IBS_RX_AWAKE:
+		/* Always acknowledge device wake up,
+		 * sending IBS message doesn't count as TX ON.
+		 */
+		if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0) {
+			BT_ERR("Failed to acknowledge device wake up");
+			break;
+		}
+		qca->ibs_sent_wacks++;
+		break;
+
+	default:
+		/* Any other state is illegal */
+		BT_ERR("Received HCI_IBS_WAKE_IND in rx state %d",
+		       qca->rx_ibs_state);
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	/* Actually send the packets */
+	hci_uart_tx_wakeup(hu);
+}
+
+/* Called upon a sleep-indication from the device.
+ */
+static void device_want_to_sleep(struct hci_uart *hu)
+{
+	unsigned long flags;
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p want to sleep", hu);
+
+	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+	qca->ibs_recv_slps++;
+
+	switch (qca->rx_ibs_state) {
+	case HCI_IBS_RX_AWAKE:
+		/* Update state */
+		qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
+		/* Vote off rx clock under workqueue */
+		queue_work(qca->workqueue, &qca->ws_rx_vote_off);
+		break;
+
+	case HCI_IBS_RX_ASLEEP:
+		/* Fall through */
+
+	default:
+		/* Any other state is illegal */
+		BT_ERR("Received HCI_IBS_SLEEP_IND in rx state %d",
+		       qca->rx_ibs_state);
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+}
+
+/* Called upon wake-up-acknowledgement from the device
+ */
+static void device_woke_up(struct hci_uart *hu)
+{
+	unsigned long flags, idle_delay;
+	struct qca_data *qca = hu->priv;
+	struct sk_buff *skb = NULL;
+
+	BT_DBG("hu %p woke up", hu);
+
+	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+	qca->ibs_recv_wacks++;
+
+	switch (qca->tx_ibs_state) {
+	case HCI_IBS_TX_AWAKE:
+		/* Expect one if we send 2 WAKEs */
+		BT_DBG("Received HCI_IBS_WAKE_ACK in tx state %d",
+		       qca->tx_ibs_state);
+		break;
+
+	case HCI_IBS_TX_WAKING:
+		/* Send pending packets */
+		while ((skb = skb_dequeue(&qca->tx_wait_q)))
+			skb_queue_tail(&qca->txq, skb);
+
+		/* Switch timers and change state to HCI_IBS_TX_AWAKE */
+		del_timer(&qca->wake_retrans_timer);
+		idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
+		mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
+		qca->tx_ibs_state = HCI_IBS_TX_AWAKE;
+		break;
+
+	case HCI_IBS_TX_ASLEEP:
+		/* Fall through */
+
+	default:
+		BT_ERR("Received HCI_IBS_WAKE_ACK in tx state %d",
+		       qca->tx_ibs_state);
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	/* Actually send the packets */
+	hci_uart_tx_wakeup(hu);
+}
+
+/* Enqueue frame for transmittion (padding, crc, etc) may be called from
+ * two simultaneous tasklets.
+ */
+static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	unsigned long flags = 0, idle_delay;
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p qca enq skb %p tx_ibs_state %d", hu, skb,
+	       qca->tx_ibs_state);
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+	/* Don't go to sleep in middle of patch download or
+	 * Out-Of-Band(GPIOs control) sleep is selected.
+	 */
+	if (!test_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
+		skb_queue_tail(&qca->txq, skb);
+		return 0;
+	}
+
+	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+	/* Act according to current state */
+	switch (qca->tx_ibs_state) {
+	case HCI_IBS_TX_AWAKE:
+		BT_DBG("Device awake, sending normally");
+		skb_queue_tail(&qca->txq, skb);
+		idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
+		mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
+		break;
+
+	case HCI_IBS_TX_ASLEEP:
+		BT_DBG("Device asleep, waking up and queueing packet");
+		/* Save packet for later */
+		skb_queue_tail(&qca->tx_wait_q, skb);
+
+		qca->tx_ibs_state = HCI_IBS_TX_WAKING;
+		/* Schedule a work queue to wake up device */
+		queue_work(qca->workqueue, &qca->ws_awake_device);
+		break;
+
+	case HCI_IBS_TX_WAKING:
+		BT_DBG("Device waking up, queueing packet");
+		/* Transient state; just keep packet for later */
+		skb_queue_tail(&qca->tx_wait_q, skb);
+		break;
+
+	default:
+		BT_ERR("Illegal tx state: %d (losing packet)",
+		       qca->tx_ibs_state);
+		kfree_skb(skb);
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	return 0;
+}
+
+static int qca_ibs_sleep_ind(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_SLEEP_IND);
+
+	device_want_to_sleep(hu);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int qca_ibs_wake_ind(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_IND);
+
+	device_want_to_wakeup(hu);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_ACK);
+
+	device_woke_up(hu);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+#define QCA_IBS_SLEEP_IND_EVENT \
+	.type = HCI_IBS_SLEEP_IND, \
+	.hlen = 0, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = HCI_MAX_IBS_SIZE
+
+#define QCA_IBS_WAKE_IND_EVENT \
+	.type = HCI_IBS_WAKE_IND, \
+	.hlen = 0, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = HCI_MAX_IBS_SIZE
+
+#define QCA_IBS_WAKE_ACK_EVENT \
+	.type = HCI_IBS_WAKE_ACK, \
+	.hlen = 0, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = HCI_MAX_IBS_SIZE
+
+static const struct h4_recv_pkt qca_recv_pkts[] = {
+	{ H4_RECV_ACL,             .recv = hci_recv_frame    },
+	{ H4_RECV_SCO,             .recv = hci_recv_frame    },
+	{ H4_RECV_EVENT,           .recv = hci_recv_frame    },
+	{ QCA_IBS_WAKE_IND_EVENT,  .recv = qca_ibs_wake_ind  },
+	{ QCA_IBS_WAKE_ACK_EVENT,  .recv = qca_ibs_wake_ack  },
+	{ QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind },
+};
+
+static int qca_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct qca_data *qca = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	qca->rx_skb = h4_recv_buf(hu->hdev, qca->rx_skb, data, count,
+				  qca_recv_pkts, ARRAY_SIZE(qca_recv_pkts));
+	if (IS_ERR(qca->rx_skb)) {
+		int err = PTR_ERR(qca->rx_skb);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		qca->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static struct sk_buff *qca_dequeue(struct hci_uart *hu)
+{
+	struct qca_data *qca = hu->priv;
+
+	return skb_dequeue(&qca->txq);
+}
+
+static uint8_t qca_get_baudrate_value(int speed)
+{
+	switch (speed) {
+	case 9600:
+		return QCA_BAUDRATE_9600;
+	case 19200:
+		return QCA_BAUDRATE_19200;
+	case 38400:
+		return QCA_BAUDRATE_38400;
+	case 57600:
+		return QCA_BAUDRATE_57600;
+	case 115200:
+		return QCA_BAUDRATE_115200;
+	case 230400:
+		return QCA_BAUDRATE_230400;
+	case 460800:
+		return QCA_BAUDRATE_460800;
+	case 500000:
+		return QCA_BAUDRATE_500000;
+	case 921600:
+		return QCA_BAUDRATE_921600;
+	case 1000000:
+		return QCA_BAUDRATE_1000000;
+	case 2000000:
+		return QCA_BAUDRATE_2000000;
+	case 3000000:
+		return QCA_BAUDRATE_3000000;
+	case 3200000:
+		return QCA_BAUDRATE_3200000;
+	case 3500000:
+		return QCA_BAUDRATE_3500000;
+	default:
+		return QCA_BAUDRATE_115200;
+	}
+}
+
+static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+	struct sk_buff *skb;
+	struct qca_serdev *qcadev;
+	u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
+
+	if (baudrate > QCA_BAUDRATE_3200000)
+		return -EINVAL;
+
+	cmd[4] = baudrate;
+
+	skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hdev, "Failed to allocate baudrate packet");
+		return -ENOMEM;
+	}
+
+	/* Disabling hardware flow control is mandatory while
+	 * sending change baudrate request to wcn3990 SoC.
+	 */
+	qcadev = serdev_device_get_drvdata(hu->serdev);
+	if (qcadev->btsoc_type == QCA_WCN3990)
+		hci_uart_set_flow_control(hu, true);
+
+	/* Assign commands to change baudrate and packet type. */
+	skb_put_data(skb, cmd, sizeof(cmd));
+	hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+	skb_queue_tail(&qca->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	/* wait 300ms to change new baudrate on controller side
+	 * controller will come back after they receive this HCI command
+	 * then host can communicate with new baudrate to controller
+	 */
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(msecs_to_jiffies(BAUDRATE_SETTLE_TIMEOUT_MS));
+	set_current_state(TASK_RUNNING);
+
+	if (qcadev->btsoc_type == QCA_WCN3990)
+		hci_uart_set_flow_control(hu, false);
+
+	return 0;
+}
+
+static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	if (hu->serdev)
+		serdev_device_set_baudrate(hu->serdev, speed);
+	else
+		hci_uart_set_baudrate(hu, speed);
+}
+
+static int qca_send_power_pulse(struct hci_dev *hdev, u8 cmd)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+	struct sk_buff *skb;
+
+	/* These power pulses are single byte command which are sent
+	 * at required baudrate to wcn3990. On wcn3990, we have an external
+	 * circuit at Tx pin which decodes the pulse sent at specific baudrate.
+	 * For example, wcn3990 supports RF COEX antenna for both Wi-Fi/BT
+	 * and also we use the same power inputs to turn on and off for
+	 * Wi-Fi/BT. Powering up the power sources will not enable BT, until
+	 * we send a power on pulse at 115200 bps. This algorithm will help to
+	 * save power. Disabling hardware flow control is mandatory while
+	 * sending power pulses to SoC.
+	 */
+	bt_dev_dbg(hdev, "sending power pulse %02x to SoC", cmd);
+
+	skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hci_uart_set_flow_control(hu, true);
+
+	skb_put_u8(skb, cmd);
+	hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+	skb_queue_tail(&qca->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	/* Wait for 100 uS for SoC to settle down */
+	usleep_range(100, 200);
+	hci_uart_set_flow_control(hu, false);
+
+	return 0;
+}
+
+static unsigned int qca_get_speed(struct hci_uart *hu,
+				  enum qca_speed_type speed_type)
+{
+	unsigned int speed = 0;
+
+	if (speed_type == QCA_INIT_SPEED) {
+		if (hu->init_speed)
+			speed = hu->init_speed;
+		else if (hu->proto->init_speed)
+			speed = hu->proto->init_speed;
+	} else {
+		if (hu->oper_speed)
+			speed = hu->oper_speed;
+		else if (hu->proto->oper_speed)
+			speed = hu->proto->oper_speed;
+	}
+
+	return speed;
+}
+
+static int qca_check_speeds(struct hci_uart *hu)
+{
+	struct qca_serdev *qcadev;
+
+	qcadev = serdev_device_get_drvdata(hu->serdev);
+	if (qcadev->btsoc_type == QCA_WCN3990) {
+		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
+		    !qca_get_speed(hu, QCA_OPER_SPEED))
+			return -EINVAL;
+	} else {
+		if (!qca_get_speed(hu, QCA_INIT_SPEED) ||
+		    !qca_get_speed(hu, QCA_OPER_SPEED))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
+{
+	unsigned int speed, qca_baudrate;
+	int ret;
+
+	if (speed_type == QCA_INIT_SPEED) {
+		speed = qca_get_speed(hu, QCA_INIT_SPEED);
+		if (speed)
+			host_set_baudrate(hu, speed);
+	} else {
+		speed = qca_get_speed(hu, QCA_OPER_SPEED);
+		if (!speed)
+			return 0;
+
+		qca_baudrate = qca_get_baudrate_value(speed);
+		bt_dev_dbg(hu->hdev, "Set UART speed to %d", speed);
+		ret = qca_set_baudrate(hu->hdev, qca_baudrate);
+		if (ret)
+			return ret;
+
+		host_set_baudrate(hu, speed);
+	}
+
+	return 0;
+}
+
+static int qca_wcn3990_init(struct hci_uart *hu)
+{
+	struct hci_dev *hdev = hu->hdev;
+	int ret;
+
+	/* Forcefully enable wcn3990 to enter in to boot mode. */
+	host_set_baudrate(hu, 2400);
+	ret = qca_send_power_pulse(hdev, QCA_WCN3990_POWEROFF_PULSE);
+	if (ret)
+		return ret;
+
+	qca_set_speed(hu, QCA_INIT_SPEED);
+	ret = qca_send_power_pulse(hdev, QCA_WCN3990_POWERON_PULSE);
+	if (ret)
+		return ret;
+
+	/* Wait for 100 ms for SoC to boot */
+	msleep(100);
+
+	/* Now the device is in ready state to communicate with host.
+	 * To sync host with device we need to reopen port.
+	 * Without this, we will have RTS and CTS synchronization
+	 * issues.
+	 */
+	serdev_device_close(hu->serdev);
+	ret = serdev_device_open(hu->serdev);
+	if (ret) {
+		bt_dev_err(hu->hdev, "failed to open port");
+		return ret;
+	}
+
+	hci_uart_set_flow_control(hu, false);
+
+	return 0;
+}
+
+static int qca_setup(struct hci_uart *hu)
+{
+	struct hci_dev *hdev = hu->hdev;
+	struct qca_data *qca = hu->priv;
+	unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
+	struct qca_serdev *qcadev;
+	int ret;
+	int soc_ver = 0;
+
+	qcadev = serdev_device_get_drvdata(hu->serdev);
+
+	ret = qca_check_speeds(hu);
+	if (ret)
+		return ret;
+
+	/* Patch downloading has to be done without IBS mode */
+	clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+
+	if (qcadev->btsoc_type == QCA_WCN3990) {
+		bt_dev_info(hdev, "setting up wcn3990");
+		ret = qca_wcn3990_init(hu);
+		if (ret)
+			return ret;
+
+		ret = qca_read_soc_version(hdev, &soc_ver);
+		if (ret)
+			return ret;
+	} else {
+		bt_dev_info(hdev, "ROME setup");
+		qca_set_speed(hu, QCA_INIT_SPEED);
+	}
+
+	/* Setup user speed if needed */
+	speed = qca_get_speed(hu, QCA_OPER_SPEED);
+	if (speed) {
+		ret = qca_set_speed(hu, QCA_OPER_SPEED);
+		if (ret)
+			return ret;
+
+		qca_baudrate = qca_get_baudrate_value(speed);
+	}
+
+	if (qcadev->btsoc_type != QCA_WCN3990) {
+		/* Get QCA version information */
+		ret = qca_read_soc_version(hdev, &soc_ver);
+		if (ret)
+			return ret;
+	}
+
+	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
+	/* Setup patch / NVM configurations */
+	ret = qca_uart_setup(hdev, qca_baudrate, qcadev->btsoc_type, soc_ver);
+	if (!ret) {
+		set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+		qca_debugfs_init(hdev);
+	} else if (ret == -ENOENT) {
+		/* No patch/nvm-config found, run with original fw/config */
+		ret = 0;
+	} else if (ret == -EAGAIN) {
+		/*
+		 * Userspace firmware loader will return -EAGAIN in case no
+		 * patch/nvm-config is found, so run with original fw/config.
+		 */
+		ret = 0;
+	}
+
+	/* Setup bdaddr */
+	hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+
+	return ret;
+}
+
+static struct hci_uart_proto qca_proto = {
+	.id		= HCI_UART_QCA,
+	.name		= "QCA",
+	.manufacturer	= 29,
+	.init_speed	= 115200,
+	.oper_speed	= 3000000,
+	.open		= qca_open,
+	.close		= qca_close,
+	.flush		= qca_flush,
+	.setup		= qca_setup,
+	.recv		= qca_recv,
+	.enqueue	= qca_enqueue,
+	.dequeue	= qca_dequeue,
+};
+
+static const struct qca_vreg_data qca_soc_data = {
+	.soc_type = QCA_WCN3990,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio",   1800000, 1900000,  15000  },
+		{ "vddxo",   1800000, 1900000,  80000  },
+		{ "vddrf",   1300000, 1350000,  300000 },
+		{ "vddch0",  3300000, 3400000,  450000 },
+	},
+	.num_vregs = 4,
+};
+
+static void qca_power_shutdown(struct hci_uart *hu)
+{
+	struct serdev_device *serdev = hu->serdev;
+	unsigned char cmd = QCA_WCN3990_POWEROFF_PULSE;
+
+	host_set_baudrate(hu, 2400);
+	hci_uart_set_flow_control(hu, true);
+	serdev_device_write_buf(serdev, &cmd, sizeof(cmd));
+	hci_uart_set_flow_control(hu, false);
+	qca_power_setup(hu, false);
+}
+
+static int qca_enable_regulator(struct qca_vreg vregs,
+				struct regulator *regulator)
+{
+	int ret;
+
+	ret = regulator_set_voltage(regulator, vregs.min_uV,
+				    vregs.max_uV);
+	if (ret)
+		return ret;
+
+	if (vregs.load_uA)
+		ret = regulator_set_load(regulator,
+					 vregs.load_uA);
+
+	if (ret)
+		return ret;
+
+	return regulator_enable(regulator);
+
+}
+
+static void qca_disable_regulator(struct qca_vreg vregs,
+				  struct regulator *regulator)
+{
+	regulator_disable(regulator);
+	regulator_set_voltage(regulator, 0, vregs.max_uV);
+	if (vregs.load_uA)
+		regulator_set_load(regulator, 0);
+
+}
+
+static int qca_power_setup(struct hci_uart *hu, bool on)
+{
+	struct qca_vreg *vregs;
+	struct regulator_bulk_data *vreg_bulk;
+	struct qca_serdev *qcadev;
+	int i, num_vregs, ret = 0;
+
+	qcadev = serdev_device_get_drvdata(hu->serdev);
+	if (!qcadev || !qcadev->bt_power || !qcadev->bt_power->vreg_data ||
+	    !qcadev->bt_power->vreg_bulk)
+		return -EINVAL;
+
+	vregs = qcadev->bt_power->vreg_data->vregs;
+	vreg_bulk = qcadev->bt_power->vreg_bulk;
+	num_vregs = qcadev->bt_power->vreg_data->num_vregs;
+	BT_DBG("on: %d", on);
+	if (on && !qcadev->bt_power->vregs_on) {
+		for (i = 0; i < num_vregs; i++) {
+			ret = qca_enable_regulator(vregs[i],
+						   vreg_bulk[i].consumer);
+			if (ret)
+				break;
+		}
+
+		if (ret) {
+			BT_ERR("failed to enable regulator:%s", vregs[i].name);
+			/* turn off regulators which are enabled */
+			for (i = i - 1; i >= 0; i--)
+				qca_disable_regulator(vregs[i],
+						      vreg_bulk[i].consumer);
+		} else {
+			qcadev->bt_power->vregs_on = true;
+		}
+	} else if (!on && qcadev->bt_power->vregs_on) {
+		/* turn off regulator in reverse order */
+		i = qcadev->bt_power->vreg_data->num_vregs - 1;
+		for ( ; i >= 0; i--)
+			qca_disable_regulator(vregs[i], vreg_bulk[i].consumer);
+
+		qcadev->bt_power->vregs_on = false;
+	}
+
+	return ret;
+}
+
+static int qca_init_regulators(struct qca_power *qca,
+				const struct qca_vreg *vregs, size_t num_vregs)
+{
+	int i;
+
+	qca->vreg_bulk = devm_kcalloc(qca->dev, num_vregs,
+				      sizeof(struct regulator_bulk_data),
+				      GFP_KERNEL);
+	if (!qca->vreg_bulk)
+		return -ENOMEM;
+
+	for (i = 0; i < num_vregs; i++)
+		qca->vreg_bulk[i].supply = vregs[i].name;
+
+	return devm_regulator_bulk_get(qca->dev, num_vregs, qca->vreg_bulk);
+}
+
+static int qca_serdev_probe(struct serdev_device *serdev)
+{
+	struct qca_serdev *qcadev;
+	const struct qca_vreg_data *data;
+	int err;
+
+	qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL);
+	if (!qcadev)
+		return -ENOMEM;
+
+	qcadev->serdev_hu.serdev = serdev;
+	data = of_device_get_match_data(&serdev->dev);
+	serdev_device_set_drvdata(serdev, qcadev);
+	if (data && data->soc_type == QCA_WCN3990) {
+		qcadev->btsoc_type = QCA_WCN3990;
+		qcadev->bt_power = devm_kzalloc(&serdev->dev,
+						sizeof(struct qca_power),
+						GFP_KERNEL);
+		if (!qcadev->bt_power)
+			return -ENOMEM;
+
+		qcadev->bt_power->dev = &serdev->dev;
+		qcadev->bt_power->vreg_data = data;
+		err = qca_init_regulators(qcadev->bt_power, data->vregs,
+					  data->num_vregs);
+		if (err) {
+			BT_ERR("Failed to init regulators:%d", err);
+			goto out;
+		}
+
+		qcadev->bt_power->vregs_on = false;
+
+		device_property_read_u32(&serdev->dev, "max-speed",
+					 &qcadev->oper_speed);
+		if (!qcadev->oper_speed)
+			BT_DBG("UART will pick default operating speed");
+
+		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+		if (err) {
+			BT_ERR("wcn3990 serdev registration failed");
+			goto out;
+		}
+	} else {
+		qcadev->btsoc_type = QCA_ROME;
+		qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
+					       GPIOD_OUT_LOW);
+		if (IS_ERR(qcadev->bt_en)) {
+			dev_err(&serdev->dev, "failed to acquire enable gpio\n");
+			return PTR_ERR(qcadev->bt_en);
+		}
+
+		qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
+		if (IS_ERR(qcadev->susclk)) {
+			dev_err(&serdev->dev, "failed to acquire clk\n");
+			return PTR_ERR(qcadev->susclk);
+		}
+
+		err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
+		if (err)
+			return err;
+
+		err = clk_prepare_enable(qcadev->susclk);
+		if (err)
+			return err;
+
+		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+		if (err)
+			clk_disable_unprepare(qcadev->susclk);
+	}
+
+out:	return err;
+
+}
+
+static void qca_serdev_remove(struct serdev_device *serdev)
+{
+	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
+
+	if (qcadev->btsoc_type == QCA_WCN3990)
+		qca_power_shutdown(&qcadev->serdev_hu);
+	else
+		clk_disable_unprepare(qcadev->susclk);
+
+	hci_uart_unregister_device(&qcadev->serdev_hu);
+}
+
+static const struct of_device_id qca_bluetooth_of_match[] = {
+	{ .compatible = "qcom,qca6174-bt" },
+	{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
+
+static struct serdev_device_driver qca_serdev_driver = {
+	.probe = qca_serdev_probe,
+	.remove = qca_serdev_remove,
+	.driver = {
+		.name = "hci_uart_qca",
+		.of_match_table = qca_bluetooth_of_match,
+	},
+};
+
+int __init qca_init(void)
+{
+	serdev_device_driver_register(&qca_serdev_driver);
+
+	return hci_uart_register_proto(&qca_proto);
+}
+
+int __exit qca_deinit(void)
+{
+	serdev_device_driver_unregister(&qca_serdev_driver);
+
+	return hci_uart_unregister_proto(&qca_proto);
+}